* 2.6.38-rc2: acpi backlight control missing
@ 2011-01-22 10:49 Thomas Meyer
2011-01-22 19:43 ` Rafael J. Wysocki
0 siblings, 1 reply; 7+ messages in thread
From: Thomas Meyer @ 2011-01-22 10:49 UTC (permalink / raw)
To: Linux Kernel Mailing List
with 2.6.38-rc2 the acpi backlight is gone:
$ ll /sys/devices/virtual/backlight
ls: cannot access /sys/devices/virtual/backlight: No such file or directory
$ ll /sys/class/backlight/
total 0
with 2.6.37:
$ ll /sys/devices/virtual/backlight
insgesamt 0
drwxr-xr-x. 3 root root 0 22. Jan 2011 acpi_video0
$ ll /sys/class/backlight/
insgesamt 0
lrwxrwxrwx. 1 root root 0 22. Jan 2011 acpi_video0
-> ../../devices/virtual/backlight/acpi_video0
dmesg:
$ grep -i video dmesg-3*.txt
dmesg-37.txt:[ 0.216370] pci 0000:00:02.0: Boot video device
dmesg-37.txt:[ 1.102662] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
dmesg-37.txt:[ 1.102670] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
dmesg-37.txt:[ 18.843946] Linux video capture interface: v2.00
dmesg-37.txt:[ 19.189825] uvcvideo: Found UVC 1.00 device WebCam (064e:a102)
dmesg-37.txt:[ 19.207062] usbcore: registered new interface driver uvcvideo
dmesg-37.txt:[ 19.207065] USB Video Class driver (v1.0.0)
dmesg-38.txt:[ 0.215527] pci 0000:00:02.0: Boot video device
dmesg-38.txt:[ 19.466882] Linux video capture interface: v2.00
dmesg-38.txt:[ 19.503083] uvcvideo: Found UVC 1.00 device WebCam (064e:a102)
dmesg-38.txt:[ 19.520292] usbcore: registered new interface driver uvcvideo
dmesg-38.txt:[ 19.520295] USB Video Class driver (v1.0.0)
$ grep ACPI_VIDEO /boot/config-2.6.3[78]*
/boot/config-2.6.37:CONFIG_ACPI_VIDEO=y
/boot/config-2.6.38-rc2:CONFIG_ACPI_VIDEO=y
any ideas?
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.38-rc2: acpi backlight control missing
2011-01-22 10:49 2.6.38-rc2: acpi backlight control missing Thomas Meyer
@ 2011-01-22 19:43 ` Rafael J. Wysocki
2011-01-26 18:01 ` Thomas Meyer
2011-01-28 21:12 ` Thomas Meyer
0 siblings, 2 replies; 7+ messages in thread
From: Rafael J. Wysocki @ 2011-01-22 19:43 UTC (permalink / raw)
To: Thomas Meyer
Cc: Linux Kernel Mailing List, ACPI Devel Mailing List, Matthew Garrett
On Saturday, January 22, 2011, Thomas Meyer wrote:
> with 2.6.38-rc2 the acpi backlight is gone:
>
> $ ll /sys/devices/virtual/backlight
> ls: cannot access /sys/devices/virtual/backlight: No such file or directory
>
> $ ll /sys/class/backlight/
> total 0
>
> with 2.6.37:
> $ ll /sys/devices/virtual/backlight
> insgesamt 0
> drwxr-xr-x. 3 root root 0 22. Jan 2011 acpi_video0
>
> $ ll /sys/class/backlight/
> insgesamt 0
> lrwxrwxrwx. 1 root root 0 22. Jan 2011 acpi_video0
> -> ../../devices/virtual/backlight/acpi_video0
>
> dmesg:
>
> $ grep -i video dmesg-3*.txt
> dmesg-37.txt:[ 0.216370] pci 0000:00:02.0: Boot video device
> dmesg-37.txt:[ 1.102662] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
> dmesg-37.txt:[ 1.102670] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
> dmesg-37.txt:[ 18.843946] Linux video capture interface: v2.00
> dmesg-37.txt:[ 19.189825] uvcvideo: Found UVC 1.00 device WebCam (064e:a102)
> dmesg-37.txt:[ 19.207062] usbcore: registered new interface driver uvcvideo
> dmesg-37.txt:[ 19.207065] USB Video Class driver (v1.0.0)
> dmesg-38.txt:[ 0.215527] pci 0000:00:02.0: Boot video device
> dmesg-38.txt:[ 19.466882] Linux video capture interface: v2.00
> dmesg-38.txt:[ 19.503083] uvcvideo: Found UVC 1.00 device WebCam (064e:a102)
> dmesg-38.txt:[ 19.520292] usbcore: registered new interface driver uvcvideo
> dmesg-38.txt:[ 19.520295] USB Video Class driver (v1.0.0)
>
> $ grep ACPI_VIDEO /boot/config-2.6.3[78]*
> /boot/config-2.6.37:CONFIG_ACPI_VIDEO=y
> /boot/config-2.6.38-rc2:CONFIG_ACPI_VIDEO=y
>
> any ideas?
Not really, but Matthew may have some (CCed).
Thanks,
Rafael
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.38-rc2: acpi backlight control missing
2011-01-22 19:43 ` Rafael J. Wysocki
@ 2011-01-26 18:01 ` Thomas Meyer
2011-01-28 21:12 ` Thomas Meyer
1 sibling, 0 replies; 7+ messages in thread
From: Thomas Meyer @ 2011-01-26 18:01 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Linux Kernel Mailing List, ACPI Devel Mailing List, Matthew Garrett
Am Samstag, den 22.01.2011, 20:43 +0100 schrieb Rafael J. Wysocki:
> On Saturday, January 22, 2011, Thomas Meyer wrote:
> > with 2.6.38-rc2 the acpi backlight is gone:
> >
> > any ideas?
>
> Not really, but Matthew may have some (CCed).
with 2.6.38-rc2-00175-g6fb1b30 the i915 driver tells me: "No ACPI video
bus found".
For some reasons the ACPI video device is gone.
I tried some acpi debug options but I can't see the problem. Maybe
someone else can?
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-rc2-00175-g6fb1b30 (thomas@localhost.localdomain) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #245 Wed Jan 26 17:49:59 CET 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ba63000 (usable)
[ 0.000000] BIOS-e820: 000000007ba63000 - 000000007babf000 (reserved)
[ 0.000000] BIOS-e820: 000000007babf000 - 000000007bb80000 (usable)
[ 0.000000] BIOS-e820: 000000007bb80000 - 000000007bbbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007bbbf000 - 000000007bbe0000 (usable)
[ 0.000000] BIOS-e820: 000000007bbe0000 - 000000007bbf7000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007bbf7000 - 000000007bc00000 (usable)
[ 0.000000] BIOS-e820: 000000007bc00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: JM11-MS/Aspire 1810T, BIOS v1.3310 03/25/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7bc00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 040000000 mask FC0000000 write-back
[ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ ffb000-1000000
[ 0.000000] RAMDISK: 378a5000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 370b3000 - 377fd8eb
[ 0.000000] Move RAMDISK from 00000000378a5000 - 0000000037fef8ea to 370b3000 - 377fd8ea
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 7bbf6120 0007C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 7bbf4000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT 7bbe8000 073EA (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: FACS 7bb8d000 00040
[ 0.000000] ACPI: DMAR 7bbf5000 00068 (v01 ? 00000001 00000000)
[ 0.000000] ACPI: HPET 7bbf3000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: APIC 7bbf2000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG 7bbf1000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: ASF! 7bbf0000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC 7bbe7000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT 7bbe6000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SSDT 7bbe2000 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 7bbe1000 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.000000] ACPI: SSDT 7bbe0000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1092MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007bc00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007ba63
[ 0.000000] 0: 0x0007babf -> 0x0007bb80
[ 0.000000] 0: 0x0007bbbf -> 0x0007bbe0
[ 0.000000] 0: 0x0007bbf7 -> 0x0007bc00
[ 0.000000] On node 0 totalpages: 506588
[ 0.000000] free_area_init_node: node 0, pgdat c0a98220, node_mem_map f613a200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2185 pages used for memmap
[ 0.000000] HighMem zone: 277191 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 502627
[ 0.000000] Kernel command line: root=UUID=5764c1f2-f119-4f97-b8e2-d827b8655edb LANG=de_DE.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=de-latin1-nodeadkeys kgdboc=kms,kbd resume=/dev/mapper/luks-swap rhgb quiet init=/bin/systemd acpi.debug_layer=0x10010000 acpi.debug_level=0xffffffff
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 10137280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at drivers/pci/dmar.c:634 warn_invalid_dmar+0x96/0xa0()
[ 0.000000] Hardware name: Aspire 1810T
[ 0.000000] Your BIOS is broken; DMAR reported at address 0!
[ 0.000000] BIOS vendor: INSYDE; Ver: v1.3310; Product Version: v1.3310
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.38-rc2-00175-g6fb1b30 #245
[ 0.000000] Call Trace:
[ 0.000000] [<c04327f2>] ? warn_slowpath_common+0x72/0xa0
[ 0.000000] [<c060f4c6>] ? warn_invalid_dmar+0x96/0xa0
[ 0.000000] [<c060f4c6>] ? warn_invalid_dmar+0x96/0xa0
[ 0.000000] [<c0432882>] ? warn_slowpath_fmt_taint+0x32/0x40
[ 0.000000] [<c060f4c6>] ? warn_invalid_dmar+0x96/0xa0
[ 0.000000] [<c0ad5c14>] ? check_zero_address+0x53/0x123
[ 0.000000] [<c0653593>] ? acpi_tb_verify_table+0x4b/0x4e
[ 0.000000] [<c06534d7>] ? acpi_get_table_with_size+0x59/0xae
[ 0.000000] [<c0ad5cf6>] ? detect_intel_iommu+0x12/0x78
[ 0.000000] [<c0ab756d>] ? pci_iommu_alloc+0x35/0x5a
[ 0.000000] [<c0ac11a5>] ? mem_init+0xe/0x265
[ 0.000000] [<c0ac8ea2>] ? __alloc_bootmem_node_nopanic+0x72/0x93
[ 0.000000] [<c08752e3>] ? printk+0x2d/0x32
[ 0.000000] [<c0accbfc>] ? page_cgroup_init_flatmem+0xab/0xd9
[ 0.000000] [<c0ab25c5>] ? start_kernel+0x187/0x31d
[ 0.000000] [<c0ab21c2>] ? unknown_bootoption+0x0/0x1a3
[ 0.000000] [<c0ab20bd>] ? i386_start_kernel+0xbd/0xc5
[ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
[ 0.000000] Disabling lock debugging due to kernel taint
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007bc00)
[ 0.000000] Memory: 1984040k/2027520k available (4599k kernel code, 42312k reserved, 2253k data, 488k init, 1117504k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0ab2000 - 0xc0b2c000 ( 488 kB)
[ 0.000000] .data : 0xc087de36 - 0xc0ab1280 (2253 kB)
[ 0.000000] .text : 0xc0400000 - 0xc087de36 (4599 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:288
[ 0.000000] CPU 0 irqstacks, hard=f500c000 soft=f500e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1396.413 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 2793.19 BogoMIPS (lpj=4654710)
[ 0.003341] pid_max: default: 32768 minimum: 301
[ 0.003381] Security Framework initialized
[ 0.003386] SELinux: Initializing.
[ 0.003399] SELinux: Starting in permissive mode
[ 0.003475] Mount-cache hash table entries: 512
[ 0.003606] Initializing cgroup subsys ns
[ 0.003611] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.003615] Initializing cgroup subsys cpuacct
[ 0.003620] Initializing cgroup subsys memory
[ 0.003630] Initializing cgroup subsys devices
[ 0.003633] Initializing cgroup subsys freezer
[ 0.003636] Initializing cgroup subsys net_cls
[ 0.003639] Initializing cgroup subsys blkio
[ 0.003682] mce: CPU supports 6 MCE banks
[ 0.003692] CPU0: Thermal monitoring enabled (TM2)
[ 0.003696] using mwait in idle threads.
[ 0.003704] CPU: Intel(R) Core(TM)2 Solo CPU U3500 @ 1.40GHz stepping 0a
[ 0.004350] ACPI: Core revision 20110112
[ 0.023346] ftrace: allocating 19563 entries in 39 pages
[ 0.026705] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.026716] ... version: 2
[ 0.026718] ... bit width: 40
[ 0.026720] ... generic registers: 2
[ 0.026723] ... value mask: 000000ffffffffff
[ 0.026725] ... max period: 000000007fffffff
[ 0.026727] ... fixed-purpose events: 3
[ 0.026729] ... event mask: 0000000700000003
[ 0.028078] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063329] print_constraints: dummy:
[ 0.063329] NET: Registered protocol family 16
[ 0.063329] ACPI: bus type pci registered
[ 0.063329] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.063329] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.063329] PCI: Using MMCONFIG for extended config space
[ 0.063329] PCI: Using configuration type 1 for base access
[ 0.063329] bio: create slab <bio-0> at 0
[ 0.066729] ACPI: EC: Look up EC in DSDT
[ 0.066959]
[ 0.066960] **** Context Switch from TID 0 to TID 4110443520 ****
[ 0.066961]
[ 0.066964] utils-0286 [4110443520] [00] evaluate_integer : Return value [24]
[ 0.066974] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.LPC_.EC0_._GLK]: AE_NOT_FOUND
[ 0.069916] Initializing Region \MBOX
[ 0.069975] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.070263] Initializing Region \_SB_.PCI0.HBUS
[ 0.070295] Initializing Region \_SB_.PCI0.MCHT
[ 0.070343] Initializing Region \_SB_.PCI0.OVGA.IGDP
[ 0.070366] Initializing Region \_SB_.PCI0.OVGA.IGDM
[ 0.070396] Initializing Region \NVST
[ 0.070575] Initializing Region \_SB_.PCI0.MCHP
[ 0.070595] Initializing Region \_SB_.PCI0.LPC_.PMIO
[ 0.070613] Initializing Region \_SB_.PCI0.LPC_.GPIO
[ 0.070659] Initializing Region \_SB_.PCI0.LPC_.PRR0
[ 0.070678] Initializing Region \_SB_.PCI0.LPC_.PRR1
[ 0.070697] Initializing Region \_SB_.PCI0.LPC_.PRR2
[ 0.070956] Initializing Region \_SB_.PCI0.LPC_.EC0_.ERAM
[ 0.071033] Initializing BufferField \_SB_.PCI0.LPC_.EC0_.BF00
[ 0.071058] Initializing BufferField \_SB_.PCI0.LPC_.EC0_.BF01
[ 0.071095] Initializing Region \_SB_.PCI0.UHC0.USBR
[ 0.071168] Initializing Region \_SB_.PCI0.UHC1.USBR
[ 0.071241] Initializing Region \_SB_.PCI0.UHC2.USBR
[ 0.071313] Initializing Region \_SB_.PCI0.UHCR.USBR
[ 0.071425] Initializing Region \_SB_.PCI0.EHC1.USBR
[ 0.071479] Initializing Region \_SB_.PCI0.UHC3.USBR
[ 0.071551] Initializing Region \_SB_.PCI0.UHC4.USBR
[ 0.071623] Initializing Region \_SB_.PCI0.UHC5.USBR
[ 0.071750] Initializing Region \_SB_.PCI0.EHC2.USBR
[ 0.071770] Initializing Region \_SB_.PCI0.EXP1.PXCS
[ 0.071820] Initializing Region \_SB_.PCI0.EXP2.PXCS
[ 0.071870] Initializing Region \_SB_.PCI0.EXP3.PXCS
[ 0.071920] Initializing Region \_SB_.PCI0.EXP4.PXCS
[ 0.071970] Initializing Region \_SB_.PCI0.EXP5.PXCS
[ 0.072021] Initializing Region \_SB_.PCI0.EXP6.PXCS
[ 0.072453] Initializing BufferField \_SB_.PCI0.WMID.BF00
[ 0.072475] Initializing BufferField \_SB_.PCI0.WMID.BF01
[ 0.072496] Initializing BufferField \_SB_.PCI0.WMID.BF02
[ 0.072517] Initializing BufferField \_SB_.PCI0.WMID.BF03
[ 0.072537] Initializing BufferField \_SB_.PCI0.WMID.BFW0
[ 0.072558] Initializing BufferField \_SB_.PCI0.WMID.BFW1
[ 0.072579] Initializing BufferField \_SB_.PCI0.WMID.AS00
[ 0.072603] Initializing BufferField \_SB_.PCI0.WMID.AS04
[ 0.072626] Initializing BufferField \_SB_.PCI0.WMID.AS05
[ 0.072649] Initializing BufferField \_SB_.PCI0.WMID.AS06
[ 0.072672] Initializing BufferField \_SB_.PCI0.WMID.AS07
[ 0.072695] Initializing BufferField \_SB_.PCI0.WMID.AS08
[ 0.072718] Initializing BufferField \_SB_.PCI0.WMID.AS0X
[ 0.072741] Initializing BufferField \_SB_.PCI0.WMID.BBD0
[ 0.072765] Initializing BufferField \_SB_.PCI0.WMID.BBD1
[ 0.072789] Initializing BufferField \_SB_.PCI0.WMID.BDD0
[ 0.072812] Initializing BufferField \_SB_.PCI0.WMID.BDD1
[ 0.072836] Initializing BufferField \_SB_.PCI0.WMID.DY00
[ 0.072860] Initializing BufferField \_SB_.PCI0.WMID.DY01
[ 0.072883] Initializing BufferField \_SB_.PCI0.WMID.DY02
[ 0.072907] Initializing BufferField \_SB_.PCI0.WMID.DY03
[ 0.072931] Initializing BufferField \_SB_.PCI0.WMID.DY04
[ 0.072954] Initializing BufferField \_SB_.PCI0.WMID.DY10
[ 0.072978] Initializing BufferField \_SB_.PCI0.WMID.DY11
[ 0.073001] Initializing BufferField \_SB_.PCI0.WMID.DY12
[ 0.073025] Initializing BufferField \_SB_.PCI0.WMID.DY20
[ 0.073049] Initializing BufferField \_SB_.PCI0.WMID.DY21
[ 0.073072] Initializing BufferField \_SB_.PCI0.WMID.DY22
[ 0.073096] Initializing BufferField \_SB_.PCI0.WMID.DSX4
[ 0.073119] Initializing BufferField \_SB_.PCI0.WMID.DY60
[ 0.073143] Initializing BufferField \_SB_.PCI0.WMID.DY61
[ 0.073167] Initializing BufferField \_SB_.PCI0.WMID.DY62
[ 0.073191] Initializing BufferField \_SB_.PCI0.WMID.DY63
[ 0.073214] Initializing BufferField \_SB_.PCI0.WMID.DY64
[ 0.073238] Initializing BufferField \_SB_.PCI0.WMID.WWD0
[ 0.073261] Initializing BufferField \_SB_.PCI0.WMID.WWD1
[ 0.073285] Initializing BufferField \_SB_.PCI0.WMID.WWD2
[ 0.073309] Initializing BufferField \_SB_.PCI0.WMID.WWD3
[ 0.073337] Initializing BufferField \_SB_.PCI0.WMID.WWD4
[ 0.073361] Initializing BufferField \_SB_.PCI0.WMID.WWD5
[ 0.073385] Initializing BufferField \_SB_.PCI0.WMID.WPIR
[ 0.073408] Initializing BufferField \_SB_.PCI0.WMID.WPIF
[ 0.073432] Initializing BufferField \_SB_.PCI0.WMID.WPID
[ 0.073456] Initializing BufferField \_SB_.PCI0.WMID.WPIB
[ 0.073479] Initializing BufferField \_SB_.PCI0.WMID.BO10
[ 0.073503] Initializing BufferField \_SB_.PCI0.WMID.BO11
[ 0.073527] Initializing BufferField \_SB_.PCI0.WMID.BO12
[ 0.073551] Initializing BufferField \_SB_.PCI0.WMID.BO13
[ 0.073574] Initializing BufferField \_SB_.PCI0.WMID.BO14
[ 0.073598] Initializing BufferField \_SB_.PCI0.WMID.BO20
[ 0.073622] Initializing BufferField \_SB_.PCI0.WMID.BO30
[ 0.073645] Initializing BufferField \_SB_.PCI0.WMID.BO40
[ 0.073669] Initializing BufferField \_SB_.PCI0.WMID.PN01
[ 0.073692] Initializing BufferField \_SB_.PCI0.WMID.PN02
[ 0.073716] Initializing BufferField \_SB_.PCI0.WMID.PN03
[ 0.073740] Initializing BufferField \_SB_.PCI0.WMID.PN04
[ 0.073764] Initializing BufferField \_SB_.PCI0.WMID.PN05
[ 0.073788] Initializing BufferField \_SB_.PCI0.WMID.PN06
[ 0.073811] Initializing BufferField \_SB_.PCI0.WMID.PN07
[ 0.073835] Initializing BufferField \_SB_.PCI0.WMID.PN08
[ 0.073859] Initializing BufferField \_SB_.PCI0.WMID.PN09
[ 0.073882] Initializing BufferField \_SB_.PCI0.WMID.PN10
[ 0.073906] Initializing BufferField \_SB_.PCI0.WMID.PN11
[ 0.073930] Initializing BufferField \_SB_.PCI0.WMID.PN12
[ 0.073954] Initializing BufferField \_SB_.PCI0.WMID.PN13
[ 0.073978] Initializing BufferField \_SB_.PCI0.WMID.PN14
[ 0.074002] Initializing BufferField \_SB_.PCI0.WMID.PN15
[ 0.074025] Initializing BufferField \_SB_.PCI0.WMID.PN16
[ 0.074049] Initializing BufferField \_SB_.PCI0.WMID.PN17
[ 0.074073] Initializing BufferField \_SB_.PCI0.WMID.PN18
[ 0.074127] Initializing Region \GPIO
[ 0.074147] Initializing Region \PMBA
[ 0.074166] Initializing Region \RCRB
[ 0.074375] Initializing Region \IO_T
[ 0.074393] Initializing Region \IO_D
[ 0.074410] Initializing Region \IO_H
[ 0.074480] Initializing Region \PRT0
[ 0.074498] Initializing Region \SPRT
[ 0.074516] Initializing Region \CMS1
[ 0.074535] Initializing Region \SMIO
[ 0.074705] Executing Method \_SB_._STA
[ 0.074712] Executing Method \_SB_._INI
[ 0.074718] Executing Method \_SB_.PCI0._STA
[ 0.074725] Executing Method \_SB_.PCI0._INI
[ 0.074779] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.076098] ACPI Error: Could not map memory at 0x0000000079DD2018, size 463 (20110112/exregion-178)
[ 0.076106] ACPI Exception: AE_NO_MEMORY, Returned by Handler for [SystemMemory] (20110112/evregion-474)
[ 0.076113] ACPI Error: Method parse/execution failed [\_PR_.CPU1.APPT] (Node f5058108), AE_NO_MEMORY (20110112/psparse-536)
[ 0.076125] ACPI Error: Method parse/execution failed [\_PR_.CPU1.GCAP] (Node f50580d8), AE_NO_MEMORY (20110112/psparse-536)
[ 0.076135] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PDC] (Node f50580a8), AE_NO_MEMORY (20110112/psparse-536)
[ 0.076781] ACPI Error: Could not map memory at 0x0000000079DCC918, size 141 (20110112/exregion-178)
[ 0.076788] ACPI Exception: AE_NO_MEMORY, Returned by Handler for [SystemMemory] (20110112/evregion-474)
[ 0.076796] ACPI Error: Method parse/execution failed [\_PR_.CPU1.APCT] (Node f50580f0), AE_NO_MEMORY (20110112/psparse-536)
[ 0.076806] ACPI Error: Method parse/execution failed [\_PR_.CPU2.GCAP] (Node f5058150), AE_NO_MEMORY (20110112/psparse-536)
[ 0.076816] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PDC] (Node f5058120), AE_NO_MEMORY (20110112/psparse-536)
[ 0.077743] Executing Method \_SB_.PCI0.LPC_.EC0_._REG
[ 0.077844] ACPI: Interpreter enabled
[ 0.077850] ACPI: (supports S0 S3 S4 S5)
[ 0.077895] ACPI: Using IOAPIC for interrupt routing
[ 0.077952] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\._STA]: AE_NOT_FOUND
[ 0.077960] bus-0103 [4110443520] [00] bus_get_device : No context for object [ffffffff]
[ 0.078024] scan-1312 [4110443520] [00] add_single_object : Adding LNXSYSTM:00 [\] parent (null)
[ 0.078043] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_PR_.CPU0._STA]: AE_NOT_FOUND
[ 0.078051] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5040d80]
[ 0.078058] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5037018]
[ 0.078101] scan-1312 [4110443520] [00] add_single_object : Adding LNXCPU:00 [\_PR_.CPU0] parent LNXSYSTM:00
[ 0.078120] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_PR_.CPU1._STA]: AE_NOT_FOUND
[ 0.078127] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5040d98]
[ 0.078134] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5037018]
[ 0.078175] scan-1312 [4110443520] [00] add_single_object : Adding LNXCPU:01 [\_PR_.CPU1] parent LNXSYSTM:00
[ 0.078190] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_PR_.CPU2._STA]: AE_NOT_FOUND
[ 0.078197] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5040db0]
[ 0.078204] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5037018]
[ 0.078245] scan-1312 [4110443520] [00] add_single_object : Adding LNXCPU:02 [\_PR_.CPU2] parent LNXSYSTM:00
[ 0.078257] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_PR_.CPU3._STA]: AE_NOT_FOUND
[ 0.078263] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5040dc8]
[ 0.078272] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5037018]
[ 0.078315] scan-1312 [4110443520] [00] add_single_object : Adding LNXCPU:03 [\_PR_.CPU3] parent LNXSYSTM:00
[ 0.078328] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_._STA]: AE_NOT_FOUND
[ 0.078335] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5037030]
[ 0.078406] scan-1312 [4110443520] [00] add_single_object : Adding device:00 [\_SB_] parent LNXSYSTM:00
[ 0.078415] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PWRB._STA]: AE_NOT_FOUND
[ 0.078422] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503c108]
[ 0.078499] scan-1312 [4110443520] [00] add_single_object : Adding PNP0C0C:00 [\_SB_.PWRB] parent device:00
[ 0.078509] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.LID0._STA]: AE_NOT_FOUND
[ 0.078516] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503c138]
[ 0.078592] scan-1312 [4110443520] [00] add_single_object : Adding PNP0C0D:00 [\_SB_.LID0] parent device:00
[ 0.078603] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.SLPB._STA]: AE_NOT_FOUND
[ 0.078610] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503c180]
[ 0.078690] scan-1312 [4110443520] [00] add_single_object : Adding PNP0C0E:00 [\_SB_.SLPB] parent device:00
[ 0.078722] utils-0286 [4110443520] [00] evaluate_integer : Return value [15]
[ 0.078729] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503c1b0]
[ 0.078829] scan-1312 [4110443520] [00] add_single_object : Adding PNP0C0A:00 [\_SB_.BAT1] parent device:00
[ 0.078854] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.ACAD._STA]: AE_NOT_FOUND
[ 0.078861] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503c3f0]
[ 0.078937] scan-1312 [4110443520] [00] add_single_object : Adding ACPI0003:00 [\_SB_.ACAD] parent device:00
[ 0.078950] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0._STA]: AE_NOT_FOUND
[ 0.078958] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503c468]
[ 0.079045] scan-1312 [4110443520] [00] add_single_object : Adding PNP0A08:00 [\_SB_.PCI0] parent device:00
[ 0.079082] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.OVGA._STA]: AE_NOT_FOUND
[ 0.079089] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503c858]
[ 0.079173] scan-1312 [4110443520] [00] add_single_object : Adding device:01 [\_SB_.PCI0.OVGA] parent PNP0A08:00
[ 0.079185] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.OVGA.DD01._STA]: AE_NOT_FOUND
[ 0.079192] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503c8b8]
[ 0.079333] scan-1312 [4110443520] [00] add_single_object : Adding device:02 [\_SB_.PCI0.OVGA.DD01] parent device:01
[ 0.079346] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.OVGA.DD02._STA]: AE_NOT_FOUND
[ 0.079354] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503c930]
[ 0.079482] scan-1312 [4110443520] [00] add_single_object : Adding device:03 [\_SB_.PCI0.OVGA.DD02] parent device:01
[ 0.079495] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.OVGA.DD03._STA]: AE_NOT_FOUND
[ 0.079502] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503c9a8]
[ 0.079632] scan-1312 [4110443520] [00] add_single_object : Adding device:04 [\_SB_.PCI0.OVGA.DD03] parent device:01
[ 0.079647] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.OVGA.DD04._STA]: AE_NOT_FOUND
[ 0.079654] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503ca68]
[ 0.079782] scan-1312 [4110443520] [00] add_single_object : Adding device:05 [\_SB_.PCI0.OVGA.DD04] parent device:01
[ 0.079795] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.OVGA.DD05._STA]: AE_NOT_FOUND
[ 0.079802] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503cae0]
[ 0.079929] scan-1312 [4110443520] [00] add_single_object : Adding device:06 [\_SB_.PCI0.OVGA.DD05] parent device:01
[ 0.080016] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.LPC_._STA]: AE_NOT_FOUND
[ 0.080024] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503a588]
[ 0.080107] scan-1312 [4110443520] [00] add_single_object : Adding device:07 [\_SB_.PCI0.LPC_] parent PNP0A08:00
[ 0.081066] utils-0286 [4110443520] [00] evaluate_integer : Return value [11]
[ 0.081073] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503ad50]
[ 0.081188] scan-1312 [4110443520] [00] add_single_object : Adding PNP0C0F:00 [\_SB_.PCI0.LPC_.LNKA] parent device:07
[ 0.081232] utils-0286 [4110443520] [00] evaluate_integer : Return value [11]
[ 0.081238] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503ae10]
[ 0.081353] scan-1312 [4110443520] [00] add_single_object : Adding PNP0C0F:01 [\_SB_.PCI0.LPC_.LNKB] parent device:07
[ 0.081396] utils-0286 [4110443520] [00] evaluate_integer : Return value [11]
[ 0.081402] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503aed0]
[ 0.081514] scan-1312 [4110443520] [00] add_single_object : Adding PNP0C0F:02 [\_SB_.PCI0.LPC_.LNKC] parent device:07
[ 0.081557] utils-0286 [4110443520] [00] evaluate_integer : Return value [11]
[ 0.081564] bus-0103 [4110443520] [00] bus_get_device : No context for object [f503af90]
[ 0.081674] scan-1312 [4110443520] [00] add_single_object : Adding PNP0C0F:03 [\_SB_.PCI0.LPC_.LNKD] parent device:07
[ 0.081731] utils-0286 [4110443520] [00] evaluate_integer : Return value [9]
[ 0.081738] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5039060]
[ 0.081851] scan-1312 [4110443520] [00] add_single_object : Adding PNP0C0F:04 [\_SB_.PCI0.LPC_.LNKE] parent device:07
[ 0.081893] utils-0286 [4110443520] [00] evaluate_integer : Return value [9]
[ 0.081900] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5039120]
[ 0.082010] scan-1312 [4110443520] [00] add_single_object : Adding PNP0C0F:05 [\_SB_.PCI0.LPC_.LNKF] parent device:07
[ 0.082054] utils-0286 [4110443520] [00] evaluate_integer : Return value [11]
[ 0.082060] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50391e0]
[ 0.082171] scan-1312 [4110443520] [00] add_single_object : Adding PNP0C0F:06 [\_SB_.PCI0.LPC_.LNKG] parent device:07
[ 0.082214] utils-0286 [4110443520] [00] evaluate_integer : Return value [11]
[ 0.082221] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50392a0]
[ 0.082333] scan-1312 [4110443520] [00] add_single_object : Adding PNP0C0F:07 [\_SB_.PCI0.LPC_.LNKH] parent device:07
[ 0.082347] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.LPC_.SYSR._STA]: AE_NOT_FOUND
[ 0.082354] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5039360]
[ 0.082440] scan-1312 [4110443520] [00] add_single_object : Adding PNP0C02:00 [\_SB_.PCI0.LPC_.SYSR] parent device:07
[ 0.082452] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.LPC_.DMAC._STA]: AE_NOT_FOUND
[ 0.082459] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50393c0]
[ 0.082540] scan-1312 [4110443520] [00] add_single_object : Adding PNP0200:00 [\_SB_.PCI0.LPC_.DMAC] parent device:07
[ 0.082551] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.LPC_.RTC_._STA]: AE_NOT_FOUND
[ 0.082558] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5039408]
[ 0.082638] scan-1312 [4110443520] [00] add_single_object : Adding PNP0B00:00 [\_SB_.PCI0.LPC_.RTC_] parent device:07
[ 0.082710] utils-0286 [4110443520] [00] evaluate_integer : Return value [15]
[ 0.082717] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5039480]
[ 0.082848] scan-1312 [4110443520] [00] add_single_object : Adding PNP0103:00 [\_SB_.PCI0.LPC_.HPET] parent device:07
[ 0.082861] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.LPC_.PIC_._STA]: AE_NOT_FOUND
[ 0.082868] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50394f8]
[ 0.082951] scan-1312 [4110443520] [00] add_single_object : Adding PNP0000:00 [\_SB_.PCI0.LPC_.PIC_] parent device:07
[ 0.082963] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.LPC_.FPU_._STA]: AE_NOT_FOUND
[ 0.082970] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5039540]
[ 0.083051] scan-1312 [4110443520] [00] add_single_object : Adding PNP0C04:00 [\_SB_.PCI0.LPC_.FPU_] parent device:07
[ 0.083062] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.LPC_.TIMR._STA]: AE_NOT_FOUND
[ 0.083070] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5039588]
[ 0.083150] scan-1312 [4110443520] [00] add_single_object : Adding PNP0100:00 [\_SB_.PCI0.LPC_.TIMR] parent device:07
[ 0.083163] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.LPC_.FWHD._STA]: AE_NOT_FOUND
[ 0.083170] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5039600]
[ 0.083249] scan-1312 [4110443520] [00] add_single_object : Adding INT0800:00 [\_SB_.PCI0.LPC_.FWHD] parent device:07
[ 0.083272] utils-0286 [4110443520] [00] evaluate_integer : Return value [15]
[ 0.083278] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5039648]
[ 0.083381] scan-1312 [4110443520] [00] add_single_object : Adding PNP0303:00 [\_SB_.PCI0.LPC_.KBC_] parent device:07
[ 0.083404] utils-0286 [4110443520] [00] evaluate_integer : Return value [15]
[ 0.083411] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50396a8]
[ 0.083505] scan-1312 [4110443520] [00] add_single_object : Adding SYN1B20:00 [\_SB_.PCI0.LPC_.MOUE] parent device:07
[ 0.083519] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.LPC_.EC0_._STA]: AE_NOT_FOUND
[ 0.083526] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5039720]
[ 0.083617] scan-1312 [4110443520] [00] add_single_object : Adding PNP0C09:00 [\_SB_.PCI0.LPC_.EC0_] parent device:07
[ 0.083704] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC0._STA]: AE_NOT_FOUND
[ 0.083712] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042258]
[ 0.083862] scan-1312 [4110443520] [00] add_single_object : Adding device:08 [\_SB_.PCI0.UHC0] parent PNP0A08:00
[ 0.083877] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC1._STA]: AE_NOT_FOUND
[ 0.083885] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042318]
[ 0.084037] scan-1312 [4110443520] [00] add_single_object : Adding device:09 [\_SB_.PCI0.UHC1] parent PNP0A08:00
[ 0.084049] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC1.UHUB._STA]: AE_NOT_FOUND
[ 0.084056] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042360]
[ 0.084133] scan-1312 [4110443520] [00] add_single_object : Adding device:0a [\_SB_.PCI0.UHC1.UHUB] parent device:09
[ 0.084143] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC1.UHUB.POR1._STA]: AE_NOT_FOUND
[ 0.084151] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042390]
[ 0.084228] scan-1312 [4110443520] [00] add_single_object : Adding device:0b [\_SB_.PCI0.UHC1.UHUB.POR1] parent device:0a
[ 0.084240] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC1.UHUB.POR2._STA]: AE_NOT_FOUND
[ 0.084247] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50423f0]
[ 0.084328] scan-1312 [4110443520] [00] add_single_object : Adding device:0c [\_SB_.PCI0.UHC1.UHUB.POR2] parent device:0a
[ 0.084344] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC2._STA]: AE_NOT_FOUND
[ 0.084352] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50424c8]
[ 0.084504] scan-1312 [4110443520] [00] add_single_object : Adding device:0d [\_SB_.PCI0.UHC2] parent PNP0A08:00
[ 0.084516] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC2.UHUB._STA]: AE_NOT_FOUND
[ 0.084523] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042510]
[ 0.084600] scan-1312 [4110443520] [00] add_single_object : Adding device:0e [\_SB_.PCI0.UHC2.UHUB] parent device:0d
[ 0.084611] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC2.UHUB.POR1._STA]: AE_NOT_FOUND
[ 0.084618] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042540]
[ 0.084696] scan-1312 [4110443520] [00] add_single_object : Adding device:0f [\_SB_.PCI0.UHC2.UHUB.POR1] parent device:0e
[ 0.084708] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC2.UHUB.POR2._STA]: AE_NOT_FOUND
[ 0.084715] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50425a0]
[ 0.084792] scan-1312 [4110443520] [00] add_single_object : Adding device:10 [\_SB_.PCI0.UHC2.UHUB.POR2] parent device:0e
[ 0.084808] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHCR._STA]: AE_NOT_FOUND
[ 0.084816] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042678]
[ 0.084966] scan-1312 [4110443520] [00] add_single_object : Adding device:11 [\_SB_.PCI0.UHCR] parent PNP0A08:00
[ 0.084978] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHCR.UHUB._STA]: AE_NOT_FOUND
[ 0.084986] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50426c0]
[ 0.085063] scan-1312 [4110443520] [00] add_single_object : Adding device:12 [\_SB_.PCI0.UHCR.UHUB] parent device:11
[ 0.085074] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHCR.UHUB.POR1._STA]: AE_NOT_FOUND
[ 0.085081] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50426f0]
[ 0.085158] scan-1312 [4110443520] [00] add_single_object : Adding device:13 [\_SB_.PCI0.UHCR.UHUB.POR1] parent device:12
[ 0.085170] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHCR.UHUB.POR2._STA]: AE_NOT_FOUND
[ 0.085178] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042750]
[ 0.085255] scan-1312 [4110443520] [00] add_single_object : Adding device:14 [\_SB_.PCI0.UHCR.UHUB.POR2] parent device:12
[ 0.085271] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC1._STA]: AE_NOT_FOUND
[ 0.085279] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042828]
[ 0.085428] scan-1312 [4110443520] [00] add_single_object : Adding device:15 [\_SB_.PCI0.EHC1] parent PNP0A08:00
[ 0.085439] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC1.EHB1._STA]: AE_NOT_FOUND
[ 0.085447] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042870]
[ 0.085527] scan-1312 [4110443520] [00] add_single_object : Adding device:16 [\_SB_.PCI0.EHC1.EHB1] parent device:15
[ 0.085537] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC1.EHB1.POR3._STA]: AE_NOT_FOUND
[ 0.085545] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50428a0]
[ 0.085623] scan-1312 [4110443520] [00] add_single_object : Adding device:17 [\_SB_.PCI0.EHC1.EHB1.POR3] parent device:16
[ 0.085635] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC1.EHB1.POR4._STA]: AE_NOT_FOUND
[ 0.085642] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042900]
[ 0.085720] scan-1312 [4110443520] [00] add_single_object : Adding device:18 [\_SB_.PCI0.EHC1.EHB1.POR4] parent device:16
[ 0.085732] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC1.EHB1.POR5._STA]: AE_NOT_FOUND
[ 0.085739] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042960]
[ 0.085816] scan-1312 [4110443520] [00] add_single_object : Adding device:19 [\_SB_.PCI0.EHC1.EHB1.POR5] parent device:16
[ 0.085828] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC1.EHB1.POR6._STA]: AE_NOT_FOUND
[ 0.085836] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50429c0]
[ 0.085916] scan-1312 [4110443520] [00] add_single_object : Adding device:1a [\_SB_.PCI0.EHC1.EHB1.POR6] parent device:16
[ 0.085932] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC3._STA]: AE_NOT_FOUND
[ 0.085939] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042a98]
[ 0.086089] scan-1312 [4110443520] [00] add_single_object : Adding device:1b [\_SB_.PCI0.UHC3] parent PNP0A08:00
[ 0.086101] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC3.UHUB._STA]: AE_NOT_FOUND
[ 0.086108] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042ae0]
[ 0.086186] scan-1312 [4110443520] [00] add_single_object : Adding device:1c [\_SB_.PCI0.UHC3.UHUB] parent device:1b
[ 0.086196] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC3.UHUB.POR2._STA]: AE_NOT_FOUND
[ 0.086204] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042b10]
[ 0.086281] scan-1312 [4110443520] [00] add_single_object : Adding device:1d [\_SB_.PCI0.UHC3.UHUB.POR2] parent device:1c
[ 0.086297] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC4._STA]: AE_NOT_FOUND
[ 0.086304] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042be8]
[ 0.086456] scan-1312 [4110443520] [00] add_single_object : Adding device:1e [\_SB_.PCI0.UHC4] parent PNP0A08:00
[ 0.086467] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC4.UHUB._STA]: AE_NOT_FOUND
[ 0.086475] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042c30]
[ 0.086553] scan-1312 [4110443520] [00] add_single_object : Adding device:1f [\_SB_.PCI0.UHC4.UHUB] parent device:1e
[ 0.086563] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC4.UHUB.POR1._STA]: AE_NOT_FOUND
[ 0.086571] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042c60]
[ 0.086649] scan-1312 [4110443520] [00] add_single_object : Adding device:20 [\_SB_.PCI0.UHC4.UHUB.POR1] parent device:1f
[ 0.086665] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC4.UHUB.POR2._STA]: AE_NOT_FOUND
[ 0.086673] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042cc0]
[ 0.086752] scan-1312 [4110443520] [00] add_single_object : Adding device:21 [\_SB_.PCI0.UHC4.UHUB.POR2] parent device:1f
[ 0.086768] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC5._STA]: AE_NOT_FOUND
[ 0.086775] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042d98]
[ 0.086926] scan-1312 [4110443520] [00] add_single_object : Adding device:22 [\_SB_.PCI0.UHC5] parent PNP0A08:00
[ 0.086938] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC5.UHUB._STA]: AE_NOT_FOUND
[ 0.086945] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042de0]
[ 0.087023] scan-1312 [4110443520] [00] add_single_object : Adding device:23 [\_SB_.PCI0.UHC5.UHUB] parent device:22
[ 0.087034] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC5.UHUB.POR1._STA]: AE_NOT_FOUND
[ 0.087041] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042e10]
[ 0.087120] scan-1312 [4110443520] [00] add_single_object : Adding device:24 [\_SB_.PCI0.UHC5.UHUB.POR1] parent device:23
[ 0.087132] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC5.UHUB.POR2._STA]: AE_NOT_FOUND
[ 0.087139] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042e70]
[ 0.087218] scan-1312 [4110443520] [00] add_single_object : Adding device:25 [\_SB_.PCI0.UHC5.UHUB.POR2] parent device:23
[ 0.087234] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC2._STA]: AE_NOT_FOUND
[ 0.087241] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042f48]
[ 0.087392] scan-1312 [4110443520] [00] add_single_object : Adding device:26 [\_SB_.PCI0.EHC2] parent PNP0A08:00
[ 0.087404] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC2.EHB1._STA]: AE_NOT_FOUND
[ 0.087411] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042f90]
[ 0.087492] scan-1312 [4110443520] [00] add_single_object : Adding device:27 [\_SB_.PCI0.EHC2.EHB1] parent device:26
[ 0.087503] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC2.EHB1.POR2._STA]: AE_NOT_FOUND
[ 0.087510] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5042fc0]
[ 0.087590] scan-1312 [4110443520] [00] add_single_object : Adding device:28 [\_SB_.PCI0.EHC2.EHB1.POR2] parent device:27
[ 0.087602] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC2.EHB1.POR3._STA]: AE_NOT_FOUND
[ 0.087609] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5043030]
[ 0.087692] scan-1312 [4110443520] [00] add_single_object : Adding device:29 [\_SB_.PCI0.EHC2.EHB1.POR3] parent device:27
[ 0.087705] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC2.EHB1.POR4._STA]: AE_NOT_FOUND
[ 0.087712] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5043090]
[ 0.087790] scan-1312 [4110443520] [00] add_single_object : Adding device:2a [\_SB_.PCI0.EHC2.EHB1.POR4] parent device:27
[ 0.087802] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC2.EHB1.POR5._STA]: AE_NOT_FOUND
[ 0.087810] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50430f0]
[ 0.087891] scan-1312 [4110443520] [00] add_single_object : Adding device:2b [\_SB_.PCI0.EHC2.EHB1.POR5] parent device:27
[ 0.087903] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC2.EHB1.POR6._STA]: AE_NOT_FOUND
[ 0.087910] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5043150]
[ 0.087988] scan-1312 [4110443520] [00] add_single_object : Adding device:2c [\_SB_.PCI0.EHC2.EHB1.POR6] parent device:27
[ 0.088004] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP1._STA]: AE_NOT_FOUND
[ 0.088011] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5043228]
[ 0.088104] scan-1312 [4110443520] [00] add_single_object : Adding device:2d [\_SB_.PCI0.EXP1] parent PNP0A08:00
[ 0.088121] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP1.PXSX._STA]: AE_NOT_FOUND
[ 0.088128] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5043348]
[ 0.088222] scan-1312 [4110443520] [00] add_single_object : Adding device:2e [\_SB_.PCI0.EXP1.PXSX] parent device:2d
[ 0.088235] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP2._STA]: AE_NOT_FOUND
[ 0.088242] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50433c0]
[ 0.088340] scan-1312 [4110443520] [00] add_single_object : Adding device:2f [\_SB_.PCI0.EXP2] parent PNP0A08:00
[ 0.088356] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP2.PXSX._STA]: AE_NOT_FOUND
[ 0.088364] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50434e0]
[ 0.088456] scan-1312 [4110443520] [00] add_single_object : Adding device:30 [\_SB_.PCI0.EXP2.PXSX] parent device:2f
[ 0.088469] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP3._STA]: AE_NOT_FOUND
[ 0.088476] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5043558]
[ 0.088569] scan-1312 [4110443520] [00] add_single_object : Adding device:31 [\_SB_.PCI0.EXP3] parent PNP0A08:00
[ 0.088586] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP3.PXSX._STA]: AE_NOT_FOUND
[ 0.088593] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5043678]
[ 0.088685] scan-1312 [4110443520] [00] add_single_object : Adding device:32 [\_SB_.PCI0.EXP3.PXSX] parent device:31
[ 0.088698] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP4._STA]: AE_NOT_FOUND
[ 0.088705] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50436f0]
[ 0.088801] scan-1312 [4110443520] [00] add_single_object : Adding device:33 [\_SB_.PCI0.EXP4] parent PNP0A08:00
[ 0.088818] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP4.PXSX._STA]: AE_NOT_FOUND
[ 0.088825] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5043810]
[ 0.088917] scan-1312 [4110443520] [00] add_single_object : Adding device:34 [\_SB_.PCI0.EXP4.PXSX] parent device:33
[ 0.088930] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP5._STA]: AE_NOT_FOUND
[ 0.088938] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5043888]
[ 0.089031] scan-1312 [4110443520] [00] add_single_object : Adding device:35 [\_SB_.PCI0.EXP5] parent PNP0A08:00
[ 0.089048] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP5.PXSX._STA]: AE_NOT_FOUND
[ 0.089055] bus-0103 [4110443520] [00] bus_get_device : No context for object [f50439a8]
[ 0.089149] scan-1312 [4110443520] [00] add_single_object : Adding device:36 [\_SB_.PCI0.EXP5.PXSX] parent device:35
[ 0.089162] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP6._STA]: AE_NOT_FOUND
[ 0.089170] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5043a20]
[ 0.089263] scan-1312 [4110443520] [00] add_single_object : Adding device:37 [\_SB_.PCI0.EXP6] parent PNP0A08:00
[ 0.089280] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP6.PXSX._STA]: AE_NOT_FOUND
[ 0.089287] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5043b40]
[ 0.089382] scan-1312 [4110443520] [00] add_single_object : Adding device:38 [\_SB_.PCI0.EXP6.PXSX] parent device:37
[ 0.089399] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.WMID._STA]: AE_NOT_FOUND
[ 0.089407] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5043c30]
[ 0.089506] scan-1312 [4110443520] [00] add_single_object : Adding PNP0C14:00 [\_SB_.PCI0.WMID] parent PNP0A08:00
[ 0.089640] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_TZ_._STA]: AE_NOT_FOUND
[ 0.089647] bus-0103 [4110443520] [00] bus_get_device : No context for object [f5037060]
[ 0.089722] scan-1312 [4110443520] [00] add_single_object : Adding device:39 [\_TZ_] parent LNXSYSTM:00
[ 0.090197] scan-1312 [4110443520] [00] add_single_object : Adding LNXPWRBN:00 [\] parent LNXSYSTM:00
[ 0.090245] utils-0286 [4110443520] [00] evaluate_integer : Return value [24]
[ 0.090254] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.LPC_.EC0_._GLK]: AE_NOT_FOUND
[ 0.090282] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.090285] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.090291] scan-0418 [4110443520] [00] device_probe : Found driver [ec] for device [EC0]
[ 0.090676] ACPI: No dock devices found.
[ 0.090679] HEST: Table not found.
[ 0.090684] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.090697] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0._SEG]: AE_NOT_FOUND
[ 0.091464] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.092988] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.092993] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.092997] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.093002] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.093019] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.093045] DMAR: Forcing write-buffer flush capability
[ 0.093047] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.093071] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.093088] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
[ 0.093098] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.093105] pci 0000:00:02.0: reg 20: [io 0x30d0-0x30d7]
[ 0.093142] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.093155] pci 0000:00:02.1: reg 10: [mem 0x92400000-0x924fffff 64bit]
[ 0.093248] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.093331] pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf]
[ 0.093425] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.096663] pci 0000:00:1a.7: reg 10: [mem 0x94504c00-0x94504fff]
[ 0.120027] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.120033] pci 0000:00:1a.7: PME# disabled
[ 0.120067] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.120091] pci 0000:00:1b.0: reg 10: [mem 0x94500000-0x94503fff 64bit]
[ 0.120172] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.120178] pci 0000:00:1b.0: PME# disabled
[ 0.120206] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.120290] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.120296] pci 0000:00:1c.0: PME# disabled
[ 0.120330] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[ 0.120415] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.120420] pci 0000:00:1c.3: PME# disabled
[ 0.120460] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.120537] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f]
[ 0.120615] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.120695] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f]
[ 0.120775] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.120852] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]
[ 0.120932] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.125294] pci 0000:00:1d.7: reg 10: [mem 0x94504800-0x94504bff]
[ 0.148655] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.148661] pci 0000:00:1d.7: PME# disabled
[ 0.148689] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.148773] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.148931] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.148961] pci 0000:00:1f.2: reg 10: [io 0x30c8-0x30cf]
[ 0.148973] pci 0000:00:1f.2: reg 14: [io 0x30dc-0x30df]
[ 0.148986] pci 0000:00:1f.2: reg 18: [io 0x30c0-0x30c7]
[ 0.148999] pci 0000:00:1f.2: reg 1c: [io 0x30d8-0x30db]
[ 0.149011] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]
[ 0.149023] pci 0000:00:1f.2: reg 24: [mem 0x94504000-0x945047ff]
[ 0.149074] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.149079] pci 0000:00:1f.2: PME# disabled
[ 0.150013] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.150037] pci 0000:00:1f.3: reg 10: [mem 0x94505000-0x945050ff 64bit]
[ 0.150069] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
[ 0.150186] pci 0000:01:00.0: [1969:1063] type 0 class 0x000200
[ 0.150216] pci 0000:01:00.0: reg 10: [mem 0x93500000-0x9353ffff 64bit]
[ 0.150233] pci 0000:01:00.0: reg 18: [io 0x2000-0x207f]
[ 0.150335] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.150342] pci 0000:01:00.0: PME# disabled
[ 0.156676] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.156682] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.156688] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
[ 0.156697] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
[ 0.156818] pci 0000:02:00.0: [8086:4232] type 0 class 0x000280
[ 0.156884] pci 0000:02:00.0: reg 10: [mem 0x92500000-0x92501fff 64bit]
[ 0.157081] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.157108] pci 0000:02:00.0: PME# disabled
[ 0.157235] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.157241] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.157247] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
[ 0.157256] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
[ 0.157343] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.157350] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.157356] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.157365] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.157370] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.157373] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.157377] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.157381] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.157403] pci_bus 0000:00: on NUMA node 0
[ 0.157409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.157813] utils-0286 [4110443520] [00] evaluate_integer : Return value [131072]
[ 0.157830] utils-0286 [4110443520] [00] evaluate_integer : Return value [2031616]
[ 0.157844] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900544]
[ 0.157857] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900545]
[ 0.159995] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900546]
[ 0.160008] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900547]
[ 0.160019] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900551]
[ 0.160031] utils-0286 [4110443520] [00] evaluate_integer : Return value [1703936]
[ 0.160044] utils-0286 [4110443520] [00] evaluate_integer : Return value [1703937]
[ 0.160054] utils-0286 [4110443520] [00] evaluate_integer : Return value [1703938]
[ 0.160065] utils-0286 [4110443520] [00] evaluate_integer : Return value [1703943]
[ 0.160077] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835008]
[ 0.160086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.160185] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835008]
[ 0.160195] utils-0286 [4110443520] [00] evaluate_integer : Return value [0]
[ 0.160208] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835009]
[ 0.160219] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835010]
[ 0.160229] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835011]
[ 0.160238] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.160335] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835011]
[ 0.160344] utils-0286 [4110443520] [00] evaluate_integer : Return value [0]
[ 0.160357] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835012]
[ 0.160368] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835013]
[ 0.160377] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.160382] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.170600] scan-0418 [4110443520] [00] device_probe : Found driver [pci_root] for device [PCI0]
[ 0.170727] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.170766] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.170772] scan-0418 [4110443520] [00] device_probe : Found driver [pci_link] for device [LNKA]
[ 0.170868] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.170906] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.170912] scan-0418 [4110443520] [00] device_probe : Found driver [pci_link] for device [LNKB]
[ 0.171005] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.171042] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.171049] scan-0418 [4110443520] [00] device_probe : Found driver [pci_link] for device [LNKC]
[ 0.171143] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.171179] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.171186] scan-0418 [4110443520] [00] device_probe : Found driver [pci_link] for device [LNKD]
[ 0.171281] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.171319] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.171325] scan-0418 [4110443520] [00] device_probe : Found driver [pci_link] for device [LNKE]
[ 0.171419] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.171457] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.171464] scan-0418 [4110443520] [00] device_probe : Found driver [pci_link] for device [LNKF]
[ 0.171558] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.171595] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.171601] scan-0418 [4110443520] [00] device_probe : Found driver [pci_link] for device [LNKG]
[ 0.171695] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.171732] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.171738] scan-0418 [4110443520] [00] device_probe : Found driver [pci_link] for device [LNKH]
[ 0.171816] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.171826] vgaarb: loaded
[ 0.171944] SCSI subsystem initialized
[ 0.171984] libata version 3.00 loaded.
[ 0.172045] usbcore: registered new interface driver usbfs
[ 0.172063] usbcore: registered new interface driver hub
[ 0.172091] usbcore: registered new device driver usb
[ 0.172141] PCI: Using ACPI for IRQ routing
[ 0.172144] PCI: pci_cache_line_size set to 64 bytes
[ 0.172272] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 0.172275] reserve RAM buffer: 000000007ba63000 - 000000007bffffff
[ 0.172280] reserve RAM buffer: 000000007bb80000 - 000000007bffffff
[ 0.172284] reserve RAM buffer: 000000007bbe0000 - 000000007bffffff
[ 0.172288] reserve RAM buffer: 000000007bc00000 - 000000007bffffff
[ 0.172395] NetLabel: Initializing
[ 0.172398] NetLabel: domain hash size = 128
[ 0.172400] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.172413] NetLabel: unlabeled traffic allowed by default
[ 0.172420] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.172427] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.172434] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.176686] Switching to clocksource hpet
[ 0.179963] Switched to NOHz mode on CPU #0
[ 0.186582] pnp: PnP ACPI init
[ 0.186603] ACPI: bus type pnp registered
[ 0.187455] pnp 00:00: [bus 00-ff]
[ 0.187459] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.187463] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.187466] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.187470] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.187473] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.187477] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.187480] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.187484] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.187487] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.187490] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.187493] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.187497] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.187500] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.187503] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.187509] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.187513] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.187516] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.187520] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.187524] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.187615] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.187923] pnp 00:01: [io 0x002e-0x002f]
[ 0.187927] pnp 00:01: [io 0x004e-0x004f]
[ 0.187930] pnp 00:01: [io 0x164e-0x164f]
[ 0.187933] pnp 00:01: [io 0x0061]
[ 0.187935] pnp 00:01: [io 0x0070]
[ 0.187938] pnp 00:01: [io 0x0080]
[ 0.187941] pnp 00:01: [io 0x0092]
[ 0.187944] pnp 00:01: [io 0x00b2-0x00b3]
[ 0.187946] pnp 00:01: [io 0x0063]
[ 0.187949] pnp 00:01: [io 0x0065]
[ 0.187952] pnp 00:01: [io 0x0067]
[ 0.187955] pnp 00:01: [io 0x0600-0x060f]
[ 0.187957] pnp 00:01: [io 0x0610]
[ 0.187960] pnp 00:01: [io 0x0800-0x080f]
[ 0.187963] pnp 00:01: [io 0x0810-0x0817]
[ 0.187966] pnp 00:01: [io 0x0820-0x0823]
[ 0.187969] pnp 00:01: [io 0x0400-0x047f]
[ 0.187971] pnp 00:01: [io 0x0500-0x053f]
[ 0.187975] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.187978] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.187981] pnp 00:01: [mem 0xfed10000-0xfed13fff]
[ 0.187984] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.187987] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.187991] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.187994] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.187997] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.188000] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.188003] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.188037] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x1000-0x1fff]
[ 0.188121] system 00:01: [io 0x0600-0x060f] has been reserved
[ 0.188125] system 00:01: [io 0x0610] has been reserved
[ 0.188129] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.188132] system 00:01: [io 0x0810-0x0817] has been reserved
[ 0.188136] system 00:01: [io 0x0820-0x0823] has been reserved
[ 0.188140] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.188144] system 00:01: [io 0x0500-0x053f] has been reserved
[ 0.188149] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.188153] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.188158] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.188162] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.188166] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.188170] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.188174] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.188179] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.188183] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.188187] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.188192] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.188212] pnp 00:02: [io 0x0000-0x001f]
[ 0.188215] pnp 00:02: [io 0x0081-0x0091]
[ 0.188218] pnp 00:02: [io 0x0093-0x009f]
[ 0.188221] pnp 00:02: [io 0x00c0-0x00df]
[ 0.188225] pnp 00:02: [dma 4]
[ 0.188269] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.188320] pnp 00:03: [io 0x0070-0x0077]
[ 0.188367] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.188529] pnp 00:04: [irq 0 disabled]
[ 0.188542] pnp 00:04: [irq 8]
[ 0.188545] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.188592] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.188615] pnp 00:05: [io 0x00f0]
[ 0.188621] pnp 00:05: [irq 13]
[ 0.188669] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.188691] pnp 00:06: [mem 0xff800000-0xffffffff]
[ 0.188738] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.188768] pnp 00:07: [io 0x0060]
[ 0.188771] pnp 00:07: [io 0x0064]
[ 0.188777] pnp 00:07: [irq 1]
[ 0.188825] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.188860] pnp 00:08: [irq 12]
[ 0.188910] pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 PNP0f13 (active)
[ 0.189137] pnp: PnP ACPI: found 9 devices
[ 0.189140] ACPI: ACPI bus type pnp unregistered
[ 0.225848] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.225853] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.225861] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
[ 0.225867] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
[ 0.225876] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.225881] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.225888] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
[ 0.225894] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
[ 0.225903] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.225906] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.225913] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.225918] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.225938] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.225945] pci 0000:00:1c.0: setting latency timer to 64
[ 0.225956] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.225962] pci 0000:00:1c.3: setting latency timer to 64
[ 0.225970] pci 0000:00:1e.0: setting latency timer to 64
[ 0.225976] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.225979] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.225983] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.225987] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.225990] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.225994] pci_bus 0000:01: resource 1 [mem 0x93500000-0x944fffff]
[ 0.225998] pci_bus 0000:01: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
[ 0.226002] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.226005] pci_bus 0000:02: resource 1 [mem 0x92500000-0x934fffff]
[ 0.226009] pci_bus 0000:02: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
[ 0.226013] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.226016] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.226020] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.226024] pci_bus 0000:03: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.226059] NET: Registered protocol family 2
[ 0.226099] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.226248] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.226939] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.227101] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.227104] TCP reno registered
[ 0.227107] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.227115] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.227198] NET: Registered protocol family 1
[ 0.227212] pci 0000:00:02.0: Boot video device
[ 0.253401] PCI: CLS 64 bytes, default 64
[ 0.253466] Trying to unpack rootfs image as initramfs...
[ 0.510330] Freeing initrd memory: 7468k freed
[ 0.514523] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.514526] Simple Boot Flag at 0x44 set to 0x1
[ 0.515103] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 0.515133] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.515269] audit: initializing netlink socket (disabled)
[ 0.515291] type=2000 audit(1296067072.513:1): initialized
[ 0.526238] highmem bounce pool size: 64 pages
[ 0.526245] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.528962] VFS: Disk quotas dquot_6.5.2
[ 0.529018] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.529670] msgmni has been set to 1707
[ 0.529735] SELinux: Registering netfilter hooks
[ 0.530044] alg: No test for stdrng (krng)
[ 0.530111] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.530115] io scheduler noop registered
[ 0.530118] io scheduler deadline registered
[ 0.530138] io scheduler cfq registered (default)
[ 0.530231] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.530292] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.530384] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.530438] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
[ 0.530560] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.530588] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.530591] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.530725] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.OVGA._RMV]: AE_NOT_FOUND
[ 0.530739] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.LPC_._RMV]: AE_NOT_FOUND
[ 0.530752] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC0._RMV]: AE_NOT_FOUND
[ 0.530763] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC1._RMV]: AE_NOT_FOUND
[ 0.530774] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC2._RMV]: AE_NOT_FOUND
[ 0.530786] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHCR._RMV]: AE_NOT_FOUND
[ 0.530797] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC1._RMV]: AE_NOT_FOUND
[ 0.530808] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC3._RMV]: AE_NOT_FOUND
[ 0.530820] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC4._RMV]: AE_NOT_FOUND
[ 0.530831] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC5._RMV]: AE_NOT_FOUND
[ 0.530843] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC2._RMV]: AE_NOT_FOUND
[ 0.530854] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP1._RMV]: AE_NOT_FOUND
[ 0.530865] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP2._RMV]: AE_NOT_FOUND
[ 0.530877] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP3._RMV]: AE_NOT_FOUND
[ 0.530888] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP4._RMV]: AE_NOT_FOUND
[ 0.530900] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP5._RMV]: AE_NOT_FOUND
[ 0.530911] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP6._RMV]: AE_NOT_FOUND
[ 0.530942] utils-0286 [4110443520] [00] evaluate_integer : Return value [131072]
[ 0.530955] utils-0286 [4110443520] [00] evaluate_integer : Return value [2031616]
[ 0.530966] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900544]
[ 0.530977] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900545]
[ 0.530988] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900546]
[ 0.530998] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900547]
[ 0.531009] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900551]
[ 0.531020] utils-0286 [4110443520] [00] evaluate_integer : Return value [1703936]
[ 0.531031] utils-0286 [4110443520] [00] evaluate_integer : Return value [1703937]
[ 0.531041] utils-0286 [4110443520] [00] evaluate_integer : Return value [1703938]
[ 0.531052] utils-0286 [4110443520] [00] evaluate_integer : Return value [1703943]
[ 0.531063] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835008]
[ 0.531074] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP1.PXSX._RMV]: AE_NOT_FOUND
[ 0.531088] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835008]
[ 0.531098] utils-0286 [4110443520] [00] evaluate_integer : Return value [0]
[ 0.531109] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835009]
[ 0.531120] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835010]
[ 0.531131] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835011]
[ 0.531142] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP4.PXSX._RMV]: AE_NOT_FOUND
[ 0.531156] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835011]
[ 0.531165] utils-0286 [4110443520] [00] evaluate_integer : Return value [0]
[ 0.531177] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835012]
[ 0.531187] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835013]
[ 0.531198] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.WMID._ADR]: AE_NOT_FOUND
[ 0.531341] intel_idle: MWAIT substates: 0x3122220
[ 0.531344] intel_idle: does not run on family 6 model 23
[ 0.531714] utils-0286 [4110443520] [00] evaluate_integer : Return value [0]
[ 0.531720] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.531979] utils-0286 [4110443520] [00] evaluate_integer : Return value [0]
[ 0.531995] ACPI: AC Adapter [ACAD] (off-line)
[ 0.531998] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.532012] scan-0418 [4110443520] [00] device_probe : Found driver [ac] for device [ACAD]
[ 0.532140] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.532146] ACPI: Power Button [PWRB]
[ 0.532149] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.532157] scan-0418 [4110443520] [00] device_probe : Found driver [button] for device [PWRB]
[ 0.532220] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.532583]
[ 0.532584] **** Context Switch from TID 4110443520 to TID 4111808512 ****
[ 0.532585]
[ 0.532588] utils-0286 [4111808512] [00] evaluate_integer : Return value [0]
[ 0.532835] utils-0286 [4111808512] [00] evaluate_integer : Return value [0]
[ 0.533403]
[ 0.533405] **** Context Switch from TID 4111808512 to TID 4110443520 ****
[ 0.533406]
[ 0.533409] utils-0286 [4110443520] [00] evaluate_integer : Return value [1]
[ 0.533417] ACPI: Lid Switch [LID0]
[ 0.533419] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.533427] scan-0418 [4110443520] [00] device_probe : Found driver [button] for device [LID0]
[ 0.533496] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.533501] ACPI: Sleep Button [SLPB]
[ 0.533504] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.533512] scan-0418 [4110443520] [00] device_probe : Found driver [button] for device [SLPB]
[ 0.533585] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.533589] ACPI: Power Button [PWRF]
[ 0.533592] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.533607] scan-0418 [4110443520] [00] device_probe : Found driver [button] for device [PWRF]
[ 0.533650] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0._SEG]: AE_NOT_FOUND
[ 0.533661] utils-0286 [4110443520] [00] evaluate_integer : Return value [0]
[ 0.533672] utils-0286 [4110443520] [00] evaluate_integer : Return value [131072]
[ 0.533681] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.OVGA._SUN]: AE_NOT_FOUND
[ 0.533692] utils-0286 [4110443520] [00] evaluate_integer : Return value [2031616]
[ 0.533700] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.LPC_._SUN]: AE_NOT_FOUND
[ 0.533710] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900544]
[ 0.533718] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC0._SUN]: AE_NOT_FOUND
[ 0.533728] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900545]
[ 0.533736] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC1._SUN]: AE_NOT_FOUND
[ 0.533746] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900546]
[ 0.533754] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC2._SUN]: AE_NOT_FOUND
[ 0.533764] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900547]
[ 0.533772] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHCR._SUN]: AE_NOT_FOUND
[ 0.533782] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900551]
[ 0.533790] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC1._SUN]: AE_NOT_FOUND
[ 0.533800] utils-0286 [4110443520] [00] evaluate_integer : Return value [1703936]
[ 0.533808] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC3._SUN]: AE_NOT_FOUND
[ 0.533818] utils-0286 [4110443520] [00] evaluate_integer : Return value [1703937]
[ 0.533826] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC4._SUN]: AE_NOT_FOUND
[ 0.533836] utils-0286 [4110443520] [00] evaluate_integer : Return value [1703938]
[ 0.533844] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.UHC5._SUN]: AE_NOT_FOUND
[ 0.533854] utils-0286 [4110443520] [00] evaluate_integer : Return value [1703943]
[ 0.533862] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EHC2._SUN]: AE_NOT_FOUND
[ 0.533872] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835008]
[ 0.533880] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP1._SUN]: AE_NOT_FOUND
[ 0.533890] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835009]
[ 0.533898] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP2._SUN]: AE_NOT_FOUND
[ 0.533908] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835010]
[ 0.533916] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP3._SUN]: AE_NOT_FOUND
[ 0.533926] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835011]
[ 0.533934] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP4._SUN]: AE_NOT_FOUND
[ 0.533944] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835012]
[ 0.533951] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP5._SUN]: AE_NOT_FOUND
[ 0.533962] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835013]
[ 0.533969] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP6._SUN]: AE_NOT_FOUND
[ 0.533980] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.WMID._ADR]: AE_NOT_FOUND
[ 0.533993] utils-0286 [4110443520] [00] evaluate_integer : Return value [131072]
[ 0.534004] utils-0286 [4110443520] [00] evaluate_integer : Return value [2031616]
[ 0.534015] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900544]
[ 0.534026] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900545]
[ 0.534037] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900546]
[ 0.534047] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900547]
[ 0.534058] utils-0286 [4110443520] [00] evaluate_integer : Return value [1900551]
[ 0.534069] utils-0286 [4110443520] [00] evaluate_integer : Return value [1703936]
[ 0.534079] utils-0286 [4110443520] [00] evaluate_integer : Return value [1703937]
[ 0.534090] utils-0286 [4110443520] [00] evaluate_integer : Return value [1703938]
[ 0.534100] utils-0286 [4110443520] [00] evaluate_integer : Return value [1703943]
[ 0.534111] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835008]
[ 0.534121] utils-0286 [4110443520] [00] evaluate_integer : Return value [0]
[ 0.534128] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP1.PXSX._SUN]: AE_NOT_FOUND
[ 0.534141] utils-0286 [4110443520] [00] evaluate_integer : Return value [0]
[ 0.534152] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835009]
[ 0.534162] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835010]
[ 0.534173] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835011]
[ 0.534183] utils-0286 [4110443520] [00] evaluate_integer : Return value [0]
[ 0.534190] utils-0050 [4110443520] [00] util_eval_error : Evaluate [\_SB_.PCI0.EXP4.PXSX._SUN]: AE_NOT_FOUND
[ 0.534203] utils-0286 [4110443520] [00] evaluate_integer : Return value [0]
[ 0.534214] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835012]
[ 0.534225] utils-0286 [4110443520] [00] evaluate_integer : Return value [1835013]
[ 0.534235] ACPI: acpi_idle registered with cpuidle
[ 0.534430] Monitor-Mwait will be used to enter C-1 state
[ 0.534434] Monitor-Mwait will be used to enter C-2 state
[ 0.534437] Monitor-Mwait will be used to enter C-3 state
[ 0.534441] Marking TSC unstable due to TSC halts in idle
[ 0.534494] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.534502] scan-0418 [4110443520] [00] device_probe : Found driver [processor] for device [CPU0]
[ 0.534517] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.534523] scan-0418 [4110443520] [00] device_probe : Found driver [processor] for device [CPU1]
[ 0.534536] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.534542] scan-0418 [4110443520] [00] device_probe : Found driver [processor] for device [CPU2]
[ 0.534555] scan-0580 [4110443520] [00] bus_driver_init : Driver successfully bound to device
[ 0.534562] scan-0418 [4110443520] [00] device_probe : Found driver [processor] for device [CPU3]
[ 0.537419] ERST: Table is not found!
[ 0.537474] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.538241] Non-volatile memory driver v1.3
[ 0.538244] Linux agpgart interface v0.103
[ 0.538288] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.538432] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.539551] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 0.539653] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 0.539712] [drm] Initialized drm 1.1.0 20060810
[ 0.539746] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.539752] i915 0000:00:02.0: setting latency timer to 64
[ 0.540937]
[ 0.540938] **** Context Switch from TID 4110443520 to TID 4110447616 ****
[ 0.540940]
[ 0.540942] utils-0286 [4110447616] [00] evaluate_integer : Return value [15]
[ 0.540949] bus-0149 [4110447616] [00] bus_get_status : Device [BAT1] status [0000000f]
[ 0.540957] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.540964] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.540967] scan-0580 [4110447616] [00] bus_driver_init : Driver successfully bound to device
[ 0.540976] scan-0418 [4110447616] [00] device_probe : Found driver [battery] for device [BAT1]
[ 0.573973] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 0.573980] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.573982] [drm] Driver supports precise vblank timestamp query.
[ 0.663102] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.109027] fbcon: inteldrmfb (fb0) is primary device
[ 1.128201] Console: switching to colour frame buffer device 170x48
[ 1.133911] fb0: inteldrmfb frame buffer device
[ 1.133913] drm: registered panic notifier
[ 1.133943] No ACPI video bus found
[ 1.134103] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.135493] brd: module loaded
[ 1.135584] ahci 0000:00:1f.2: version 3.0
[ 1.135598] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.135646] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.135694] ahci: SSS flag set, parallel bus scan disabled
[ 1.135740] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.135745] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led pmp pio slum part ccc ems
[ 1.135752] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.154122] scsi0 : ahci
[ 1.154231] scsi1 : ahci
[ 1.154312] scsi2 : ahci
[ 1.154393] scsi3 : ahci
[ 1.154473] scsi4 : ahci
[ 1.154552] scsi5 : ahci
[ 1.154622] ata1: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504100 irq 43
[ 1.154627] ata2: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504180 irq 43
[ 1.154630] ata3: DUMMY
[ 1.154632] ata4: DUMMY
[ 1.154635] ata5: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504300 irq 43
[ 1.154640] ata6: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504380 irq 43
[ 1.154719] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.154728] atl1c 0000:01:00.0: setting latency timer to 64
[ 1.240267] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[ 1.240306] console [netcon0] enabled
[ 1.240308] netconsole: network logging started
[ 1.240364] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.240381] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.240396] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.240400] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.240457] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.240492] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.244383] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.244395] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94504c00
[ 1.256688] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.256709] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.256713] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.256717] usb usb1: Product: EHCI Host Controller
[ 1.256720] usb usb1: Manufacturer: Linux 2.6.38-rc2-00175-g6fb1b30 ehci_hcd
[ 1.256723] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.256835] hub 1-0:1.0: USB hub found
[ 1.256842] hub 1-0:1.0: 2 ports detected
[ 1.256928] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.256943] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.256947] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.256995] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.257028] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.260922] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.260934] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x94504800
[ 1.273355] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.273391] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.273395] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.273398] usb usb2: Product: EHCI Host Controller
[ 1.273401] usb usb2: Manufacturer: Linux 2.6.38-rc2-00175-g6fb1b30 ehci_hcd
[ 1.273404] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.273511] hub 2-0:1.0: USB hub found
[ 1.273516] hub 2-0:1.0: 6 ports detected
[ 1.273614] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.273630] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.273655] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.273663] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.273668] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.273715] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.273752] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
[ 1.273790] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.273794] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.273798] usb usb3: Product: UHCI Host Controller
[ 1.273801] usb usb3: Manufacturer: Linux 2.6.38-rc2-00175-g6fb1b30 uhci_hcd
[ 1.273804] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.273907] hub 3-0:1.0: USB hub found
[ 1.273912] hub 3-0:1.0: 2 ports detected
[ 1.273993] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.274001] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.274006] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.274050] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.274080] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 1.274118] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.274122] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.274126] usb usb4: Product: UHCI Host Controller
[ 1.274129] usb usb4: Manufacturer: Linux 2.6.38-rc2-00175-g6fb1b30 uhci_hcd
[ 1.274132] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.274241] hub 4-0:1.0: USB hub found
[ 1.274246] hub 4-0:1.0: 2 ports detected
[ 1.274326] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.274334] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.274338] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.274385] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 1.274415] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 1.274453] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.274457] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.274460] usb usb5: Product: UHCI Host Controller
[ 1.274463] usb usb5: Manufacturer: Linux 2.6.38-rc2-00175-g6fb1b30 uhci_hcd
[ 1.274466] usb usb5: SerialNumber: 0000:00:1d.1
[ 1.274569] hub 5-0:1.0: USB hub found
[ 1.274573] hub 5-0:1.0: 2 ports detected
[ 1.274653] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.274661] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.274665] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.274711] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 1.274744] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00003040
[ 1.274781] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.274784] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.274788] usb usb6: Product: UHCI Host Controller
[ 1.274791] usb usb6: Manufacturer: Linux 2.6.38-rc2-00175-g6fb1b30 uhci_hcd
[ 1.274794] usb usb6: SerialNumber: 0000:00:1d.2
[ 1.274897] hub 6-0:1.0: USB hub found
[ 1.274901] hub 6-0:1.0: 2 ports detected
[ 1.275064] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 1.282708] i8042: Detected active multiplexing controller, rev 1.1
[ 1.286133] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.286140] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.286180] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.286214] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.286250] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.286353] mousedev: PS/2 mouse device common for all mice
[ 1.286594] rtc_cmos 00:03: RTC can wake from S4
[ 1.286642] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.286682] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.286850] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.286986] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 1.287055] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
[ 1.287111] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.287114] iTCO_vendor_support: vendor-support=0
[ 1.287206] device-mapper: uevent: version 1.0.3
[ 1.287298] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 1.287360] device-mapper: multipath: version 1.2.0 loaded
[ 1.287363] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.287366] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 1.287369] device-mapper: multipath service-time: version 0.2.0 loaded
[ 1.287501] cpuidle: using governor ladder
[ 1.287568] cpuidle: using governor menu
[ 1.287888] usbcore: registered new interface driver usbhid
[ 1.287891] usbhid: USB HID core driver
[ 1.287953] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.288175] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.288192] TCP cubic registered
[ 1.288194] Initializing XFRM netlink socket
[ 1.288205] NET: Registered protocol family 17
[ 1.288219] Using IPI Shortcut mode
[ 1.307840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.492495]
[ 1.492497] **** Context Switch from TID 4110447616 to TID 4110446592 ****
[ 1.492498]
[ 1.492502] utils-0286 [4110446592] [00] evaluate_integer : Return value [0]
[ 1.493072] utils-0286 [4110446592] [00] evaluate_integer : Return value [0]
[ 1.580096] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 1.640054] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.692125] ata1.00: ATA-8: TOSHIBA MK2555GSX, FG001J, max UDMA/100
[ 1.692129] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.692961] ata1.00: configured for UDMA/100
[ 1.693083] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2555GS FG00 PQ: 0 ANSI: 5
[ 1.693255] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.693373] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.693427] sd 0:0:0:0: [sda] Write Protect is off
[ 1.693431] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.693455] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.744260] usb 2-5: New USB device found, idVendor=064e, idProduct=a102
[ 1.744264] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.744268] usb 2-5: Product: WebCam
[ 1.744270] usb 2-5: Manufacturer: SuYin
[ 1.744273] usb 2-5: SerialNumber: CN0316-S30C-OV061-VA-R02.02.02
[ 1.746193] sda: sda1 sda2 sda3 sda4
[ 1.746488] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.990177] utils-0286 [4110446592] [00] evaluate_integer : Return value [31]
[ 1.990188] bus-0149 [4110446592] [00] bus_get_status : Device [BAT1] status [0000001f]
[ 2.013373] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.040156] utils-0286 [4110446592] [00] evaluate_integer : Return value [31]
[ 2.040163] bus-0149 [4110446592] [00] bus_get_status : Device [BAT1] status [0000001f]
[ 2.112261] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 2.157260] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input5
[ 2.333436] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.653435] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.653464] registered taskstats version 1
[ 2.653895] rtc_cmos 00:03: setting system clock to 2011-01-26 18:37:55 UTC (1296067075)
[ 2.654020] Freeing unused kernel memory: 488k freed
[ 2.654217] Write protecting the kernel text: 4600k
[ 2.654254] Write protecting the kernel read-only data: 1844k
[ 2.680641] dracut: dracut-006-6.fc14
[ 2.700241] udev[82]: starting version 161
[ 2.804587] dracut: Starting plymouth daemon
[ 2.990471]
[ 2.990473] **** Context Switch from TID 4110446592 to TID 4104763392 ****
[ 2.990475]
[ 2.990478] utils-0286 [4104763392] [00] evaluate_integer : Return value [0]
[ 2.994246]
[ 2.994248] **** Context Switch from TID 4104763392 to TID 4103507968 ****
[ 2.994249]
[ 2.994252] utils-0286 [4103507968] [00] evaluate_integer : Return value [0]
[ 2.996728]
[ 2.996730] **** Context Switch from TID 4103507968 to TID 4103511040 ****
[ 2.996731]
[ 2.996734] utils-0286 [4103511040] [00] evaluate_integer : Return value [0]
[ 3.481454] dracut: luksOpen /dev/sda3 luks-home
[ 66.918370] Intel AES-NI instructions are not detected.
[ 67.271277] dracut: luksOpen /dev/sda4 luks-swap
[ 67.979094] PM: Starting manual resume from disk
[ 68.057793] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 68.098583] dracut: Remounting /dev/disk/by-uuid/5764c1f2-f119-4f97-b8e2-d827b8655edb with -o noatime,data=writeback,ro
[ 68.135538] EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: data=writeback
[ 68.150137] dracut: Mounted root filesystem /dev/sda2
[ 68.334588] dracut: Loading SELinux policy
[ 68.712453] type=1404 audit(1296067141.556:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 68.843180] SELinux: 2048 avtab hash slots, 211082 rules.
[ 68.953321] SELinux: 2048 avtab hash slots, 211082 rules.
[ 69.222249] SELinux: 9 users, 14 roles, 3471 types, 181 bools, 1 sens, 1024 cats
[ 69.222255] SELinux: 77 classes, 211082 rules
[ 69.229447] SELinux: Permission read_policy in class security not defined in policy.
[ 69.229686] SELinux: Permission syslog in class capability2 not defined in policy.
[ 69.229696] SELinux: the above unknown classes and permissions will be allowed
[ 69.229706] SELinux: Completing initialization.
[ 69.229708] SELinux: Setting up existing superblocks.
[ 69.229716] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 69.229724] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 69.229871] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 69.229879] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 69.229894] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 69.229921] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 69.230546] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 69.230551] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 69.230557] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 69.230563] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 69.230585] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 69.230598] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 69.230607] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 69.230620] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 69.230627] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 69.230633] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 69.230911] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 69.231595] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 69.231608] SELinux: initialized (dev sda2, type ext4), uses xattr
[ 69.237501] type=1403 audit(1296067142.079:3): policy loaded auid=4294967295 ses=4294967295
[ 69.824117] dracut: Switching root
[ 70.412997] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 70.413749] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.414383] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.414678] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.414974] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.415270] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.415582] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.415878] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.416169] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.416460] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.416823] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.489416] systemd[1]: systemd 10 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX; fedora)
[ 70.796629] NET: Registered protocol family 10
[ 70.815184] systemd[1]: Set hostname to <localhost.localdomain>.
[ 72.739235] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 72.740353] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 72.740851] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 72.741781] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 72.742500] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 74.553362] udev[390]: starting version 161
[ 74.614786] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 74.645831]
[ 74.645833] **** Context Switch from TID 4103511040 to TID 4104764416 ****
[ 74.645835]
[ 74.645838] utils-0286 [4104764416] [00] evaluate_integer : Return value [0]
[ 74.863132] type=1400 audit(1296067147.702:4): avc: denied { mmap_zero } for pid=443 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
[ 74.955382]
[ 74.955384] **** Context Switch from TID 4104764416 to TID 4103510016 ****
[ 74.955386]
[ 74.955389] utils-0286 [4103510016] [00] evaluate_integer : Return value [0]
[ 74.956251]
[ 74.956253] **** Context Switch from TID 4103510016 to TID 4090493952 ****
[ 74.956254]
[ 74.956257] utils-0286 [4090493952] [00] evaluate_integer : Return value [0]
[ 75.280312] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 75.285356]
[ 75.285357] **** Context Switch from TID 4090493952 to TID 4092660736 ****
[ 75.285359]
[ 75.285362] scan-0580 [4092660736] [00] bus_driver_init : Driver successfully bound to device
[ 75.285373] scan-0418 [4092660736] [00] device_probe : Found driver [wmi] for device [WMID]
[ 75.285392] wmi: Mapper loaded
[ 75.589752] Linux video capture interface: v2.00
[ 75.705940] uvcvideo: Found UVC 1.00 device WebCam (064e:a102)
[ 75.722728] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input7
[ 75.723077] usbcore: registered new interface driver uvcvideo
[ 75.723080] USB Video Class driver (v1.0.0)
[ 75.785263] cfg80211: Calling CRDA to update world regulatory domain
[ 76.139998] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 76.449242] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 76.449246] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 76.449362] iwlagn 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 76.449372] iwlagn 0000:02:00.0: setting latency timer to 64
[ 76.449406] iwlagn 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 76.471433] iwlagn 0000:02:00.0: device EEPROM VER=0x11f, CALIB=0x4
[ 76.471436] iwlagn 0000:02:00.0: Device SKU: 0Xb
[ 76.471703] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 76.471784] iwlagn 0000:02:00.0: irq 44 for MSI/MSI-X
[ 76.790708] cfg80211: World regulatory domain updated:
[ 76.790713] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 76.790717] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 76.790721] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 76.790725] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 76.790729] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 76.790733] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 76.880503] iwlagn 0000:02:00.0: loaded firmware version 8.24.2.12
[ 76.939311] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 76.939379] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 76.939402] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 77.367485] ALSA sound/pci/hda/patch_realtek.c:1530: SKU: Nid=0x1d sku_cfg=0x4015812d
[ 77.367491] ALSA sound/pci/hda/patch_realtek.c:1532: SKU: port_connectivity=0x1
[ 77.367495] ALSA sound/pci/hda/patch_realtek.c:1533: SKU: enable_pcbeep=0x1
[ 77.367498] ALSA sound/pci/hda/patch_realtek.c:1534: SKU: check_sum=0x00000005
[ 77.367502] ALSA sound/pci/hda/patch_realtek.c:1535: SKU: customization=0x00000081
[ 77.367506] ALSA sound/pci/hda/patch_realtek.c:1536: SKU: external_amp=0x5
[ 77.367509] ALSA sound/pci/hda/patch_realtek.c:1537: SKU: platform_type=0x1
[ 77.367513] ALSA sound/pci/hda/patch_realtek.c:1538: SKU: swap=0x0
[ 77.367516] ALSA sound/pci/hda/patch_realtek.c:1539: SKU: override=0x1
[ 77.368009] hda_codec: ALC269: BIOS auto-probing.
[ 77.368015] ALSA sound/pci/hda/hda_codec.c:4633: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 77.368020] ALSA sound/pci/hda/hda_codec.c:4637: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 77.368024] ALSA sound/pci/hda/hda_codec.c:4641: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 77.368029] ALSA sound/pci/hda/hda_codec.c:4642: mono: mono_out=0x0
[ 77.368032] ALSA sound/pci/hda/hda_codec.c:4645: dig-out=0x1e/0x0
[ 77.368035] ALSA sound/pci/hda/hda_codec.c:4646: inputs:
[ 77.368038] ALSA sound/pci/hda/hda_codec.c:4652:
[ 77.368468] ALSA sound/pci/hda/patch_realtek.c:1587: realtek: No valid SSID, checking pincfg 0x4015812d for NID 0x1d
[ 77.368473] ALSA sound/pci/hda/patch_realtek.c:1603: realtek: Enabling init ASM_ID=0x812d CODEC_ID=10ec0269
[ 77.369327] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 77.410458] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 77.456718] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 77.456882] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 77.550283] cfg80211: Calling CRDA for country: DE
[ 77.555887] cfg80211: Regulatory domain changed to country: DE
[ 77.555890] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 77.555894] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 77.555898] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 77.555901] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 77.555905] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 82.085382]
[ 82.085383] **** Context Switch from TID 4092660736 to TID 4092052480 ****
[ 82.085385]
[ 82.085388] utils-0286 [4092052480] [00] evaluate_integer : Return value [0]
[ 82.143890]
[ 82.143892] **** Context Switch from TID 4092052480 to TID 4090489856 ****
[ 82.143894]
[ 82.143897] utils-0286 [4090489856] [00] evaluate_integer : Return value [0]
[ 82.192197]
[ 82.192198] **** Context Switch from TID 4090489856 to TID 4073014272 ****
[ 82.192200]
[ 82.192203] utils-0286 [4073014272] [00] evaluate_integer : Return value [0]
[ 82.416907] EXT4-fs (sda2): re-mounted. Opts: data=writeback
[ 83.015282] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 83.015399] SELinux: initialized (dev sda1, type ext2), uses xattr
[ 83.073464] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 83.073471] SELinux: initialized (dev dm-0, type ext4), uses xattr
[ 84.816338] Adding 2007604k swap on /dev/mapper/luks-swap. Priority:-1 extents:1 across:2007604k
[ 84.834847] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[ 85.495838] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 85.810056] auditd (939): /proc/939/oom_adj is deprecated, please use /proc/939/oom_score_adj instead.
[ 86.542802]
[ 86.542804] **** Context Switch from TID 4073014272 to TID 4074788864 ****
[ 86.542806]
[ 86.542809] utils-0286 [4074788864] [00] evaluate_integer : Return value [0]
[ 91.098670] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[ 91.154307] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 91.296153] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 91.784946]
[ 91.784948] **** Context Switch from TID 4074788864 to TID 4091162624 ****
[ 91.784950]
[ 91.784953] utils-0286 [4091162624] [00] evaluate_integer : Return value [0]
[ 92.068270]
[ 92.068272] **** Context Switch from TID 4091162624 to TID 4074589184 ****
[ 92.068274]
[ 92.068277] utils-0286 [4074589184] [00] evaluate_integer : Return value [0]
[ 92.670988] Bluetooth: Core ver 2.15
[ 92.671178] NET: Registered protocol family 31
[ 92.671180] Bluetooth: HCI device and connection manager initialized
[ 92.671183] Bluetooth: HCI socket layer initialized
[ 92.729344] Bluetooth: L2CAP ver 2.15
[ 92.729348] Bluetooth: L2CAP socket layer initialized
[ 92.802325] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 92.802329] Bluetooth: BNEP filters: protocol multicast
[ 92.915564] Bluetooth: SCO (Voice Link) ver 0.6
[ 92.915568] Bluetooth: SCO socket layer initialized
[ 103.781218]
[ 103.781219] **** Context Switch from TID 4074589184 to TID 4054175744 ****
[ 103.781221]
[ 103.781225] utils-0286 [4054175744] [00] evaluate_integer : Return value [0]
[ 103.781929] utils-0286 [4054175744] [00] evaluate_integer : Return value [0]
[ 174.246988] fuse init (API version 7.16)
[ 174.282594] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 174.296397] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 192.860426] wlan0: deauthenticating from 00:23:08:1d:f2:bb by local choice (reason=3)
[ 192.936978] wlan0: authenticate with 00:23:08:1d:f2:bb (try 1)
[ 193.136681] wlan0: authenticate with 00:23:08:1d:f2:bb (try 2)
[ 193.145438] wlan0: authenticated
[ 193.148673] wlan0: associate with 00:23:08:1d:f2:bb (try 1)
[ 193.346687] wlan0: associate with 00:23:08:1d:f2:bb (try 2)
[ 193.361926] wlan0: RX AssocResp from 00:23:08:1d:f2:bb (capab=0x431 status=0 aid=2)
[ 193.361934] wlan0: associated
[ 193.364644] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 203.696736] wlan0: no IPv6 routers present
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.38-rc2: acpi backlight control missing
2011-01-22 19:43 ` Rafael J. Wysocki
2011-01-26 18:01 ` Thomas Meyer
@ 2011-01-28 21:12 ` Thomas Meyer
2011-01-31 20:39 ` Rafael J. Wysocki
1 sibling, 1 reply; 7+ messages in thread
From: Thomas Meyer @ 2011-01-28 21:12 UTC (permalink / raw)
To: Rafael J. Wysocki, rui.zhang, len.brown
Cc: Linux Kernel Mailing List, ACPI Devel Mailing List
Am Samstag, den 22.01.2011, 20:43 +0100 schrieb Rafael J. Wysocki:
> On Saturday, January 22, 2011, Thomas Meyer wrote:
> > with 2.6.38-rc2 the acpi backlight is gone:
> >
> > any ideas?
>
> Not really, but Matthew may have some (CCed).
Okay, found the problem.
This commit broke my backlight:
commit 677bd810eedce61edf15452491781ff046b92edc
Author: Zhang Rui <rui.zhang@intel.com>
Date: Mon Dec 6 15:04:21 2010 +0800
ACPI video: remove output switching control
This is because in function
"acpi_is_video_device()" (drivers/acpi/video_detect.c) the backlight
device is only checked when some video capabilities were found, but by
removing the check for the VIDEO_OUTPUT_SWITCHING (that seems to be the
only video capability on my system) the check for the backlight device
isn't done anymore.
by reverting above commit, the backlight is back again.
kind regards
thomas
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.38-rc2: acpi backlight control missing
2011-01-28 21:12 ` Thomas Meyer
@ 2011-01-31 20:39 ` Rafael J. Wysocki
2011-01-31 21:34 ` Thomas Meyer
0 siblings, 1 reply; 7+ messages in thread
From: Rafael J. Wysocki @ 2011-01-31 20:39 UTC (permalink / raw)
To: Thomas Meyer
Cc: rui.zhang, Linux Kernel Mailing List, ACPI Devel Mailing List
On Friday, January 28, 2011, Thomas Meyer wrote:
> Am Samstag, den 22.01.2011, 20:43 +0100 schrieb Rafael J. Wysocki:
> > On Saturday, January 22, 2011, Thomas Meyer wrote:
> > > with 2.6.38-rc2 the acpi backlight is gone:
> > >
> > > any ideas?
> >
> > Not really, but Matthew may have some (CCed).
>
> Okay, found the problem.
>
> This commit broke my backlight:
>
> commit 677bd810eedce61edf15452491781ff046b92edc
> Author: Zhang Rui <rui.zhang@intel.com>
> Date: Mon Dec 6 15:04:21 2010 +0800
>
> ACPI video: remove output switching control
>
> This is because in function
> "acpi_is_video_device()" (drivers/acpi/video_detect.c) the backlight
> device is only checked when some video capabilities were found, but by
> removing the check for the VIDEO_OUTPUT_SWITCHING (that seems to be the
> only video capability on my system) the check for the backlight device
> isn't done anymore.
>
> by reverting above commit, the backlight is back again.
Is it the same issue as https://bugzilla.kernel.org/show_bug.cgi?id=27702 ?
In case it is, can you test the patch in there, please?
Rafael
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.38-rc2: acpi backlight control missing
2011-01-31 20:39 ` Rafael J. Wysocki
@ 2011-01-31 21:34 ` Thomas Meyer
2011-01-31 22:01 ` Rafael J. Wysocki
0 siblings, 1 reply; 7+ messages in thread
From: Thomas Meyer @ 2011-01-31 21:34 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: rui.zhang, Linux Kernel Mailing List, ACPI Devel Mailing List
Am 31.01.2011 um 21:39 schrieb "Rafael J. Wysocki" <rjw@sisk.pl>:
> On Friday, January 28, 2011, Thomas Meyer wrote:
>> Am Samstag, den 22.01.2011, 20:43 +0100 schrieb Rafael J. Wysocki:
>>> On Saturday, January 22, 2011, Thomas Meyer wrote:
>>>> with 2.6.38-rc2 the acpi backlight is gone:
>>>>
>>>> any ideas?
>>>
>>> Not really, but Matthew may have some (CCed).
>>
>> Okay, found the problem.
>>
>> This commit broke my backlight:
>>
>> commit 677bd810eedce61edf15452491781ff046b92edc
>> Author: Zhang Rui <rui.zhang@intel.com>
>> Date: Mon Dec 6 15:04:21 2010 +0800
>>
>> ACPI video: remove output switching control
>>
>> This is because in function
>> "acpi_is_video_device()" (drivers/acpi/video_detect.c) the backlight
>> device is only checked when some video capabilities were found, but by
>> removing the check for the VIDEO_OUTPUT_SWITCHING (that seems to be the
>> only video capability on my system) the check for the backlight device
>> isn't done anymore.
>>
>> by reverting above commit, the backlight is back again.
>
> Is it the same issue as https://bugzilla.kernel.org/show_bug.cgi?id=27702 ?
Yes, it is.
> In case it is, can you test the patch in there, please?
>
Didn't test the patch. But it should do the trick.
> Rafael
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.38-rc2: acpi backlight control missing
2011-01-31 21:34 ` Thomas Meyer
@ 2011-01-31 22:01 ` Rafael J. Wysocki
0 siblings, 0 replies; 7+ messages in thread
From: Rafael J. Wysocki @ 2011-01-31 22:01 UTC (permalink / raw)
To: Thomas Meyer
Cc: rui.zhang, Linux Kernel Mailing List, ACPI Devel Mailing List, Len Brown
On Monday, January 31, 2011, Thomas Meyer wrote:
> Am 31.01.2011 um 21:39 schrieb "Rafael J. Wysocki" <rjw@sisk.pl>:
>
> > On Friday, January 28, 2011, Thomas Meyer wrote:
> >> Am Samstag, den 22.01.2011, 20:43 +0100 schrieb Rafael J. Wysocki:
> >>> On Saturday, January 22, 2011, Thomas Meyer wrote:
> >>>> with 2.6.38-rc2 the acpi backlight is gone:
> >>>>
> >>>> any ideas?
> >>>
> >>> Not really, but Matthew may have some (CCed).
> >>
> >> Okay, found the problem.
> >>
> >> This commit broke my backlight:
> >>
> >> commit 677bd810eedce61edf15452491781ff046b92edc
> >> Author: Zhang Rui <rui.zhang@intel.com>
> >> Date: Mon Dec 6 15:04:21 2010 +0800
> >>
> >> ACPI video: remove output switching control
> >>
> >> This is because in function
> >> "acpi_is_video_device()" (drivers/acpi/video_detect.c) the backlight
> >> device is only checked when some video capabilities were found, but by
> >> removing the check for the VIDEO_OUTPUT_SWITCHING (that seems to be the
> >> only video capability on my system) the check for the backlight device
> >> isn't done anymore.
> >>
> >> by reverting above commit, the backlight is back again.
> >
> > Is it the same issue as https://bugzilla.kernel.org/show_bug.cgi?id=27702 ?
>
> Yes, it is.
>
> > In case it is, can you test the patch in there, please?
> >
>
> Didn't test the patch. But it should do the trick.
Great, thanks!
Rafael
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-01-31 22:01 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-01-22 10:49 2.6.38-rc2: acpi backlight control missing Thomas Meyer
2011-01-22 19:43 ` Rafael J. Wysocki
2011-01-26 18:01 ` Thomas Meyer
2011-01-28 21:12 ` Thomas Meyer
2011-01-31 20:39 ` Rafael J. Wysocki
2011-01-31 21:34 ` Thomas Meyer
2011-01-31 22:01 ` Rafael J. Wysocki
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.