* [PATCH v2] Bluetooth: Use proper timer for hci command timout
@ 2011-02-14 11:36 ville.tervo
2011-02-14 14:40 ` Gustavo F. Padovan
0 siblings, 1 reply; 2+ messages in thread
From: ville.tervo @ 2011-02-14 11:36 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Ville Tervo
From: Ville Tervo <ville.tervo@nokia.com>
Use proper timer instead of hci command flow control to timeout
failed hci commands. Otherwise stack ends up sending commands
when flow control is used to block new commands.
2010-09-01 18:29:41.592132 < HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:16:CF:E1:C7:D7 mode 2 clkoffset 0x0000
2010-09-01 18:29:41.592681 > HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 0
2010-09-01 18:29:51.022033 < HCI Command: Remote Name Request Cancel (0x01|0x001a) plen 6
bdaddr 00:16:CF:E1:C7:D7
Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
---
include/net/bluetooth/hci.h | 3 +++
include/net/bluetooth/hci_core.h | 2 +-
net/bluetooth/hci_core.c | 22 ++++++++++++++++------
net/bluetooth/hci_event.c | 6 ++++++
4 files changed, 26 insertions(+), 7 deletions(-)
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 4bee030..918af32 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -119,6 +119,7 @@ enum {
#define HCI_PAIRING_TIMEOUT (60000) /* 60 seconds */
#define HCI_IDLE_TIMEOUT (6000) /* 6 seconds */
#define HCI_INIT_TIMEOUT (10000) /* 10 seconds */
+#define HCI_CMD_TIMEOUT (1000) /* 1 seconds */
/* HCI data types */
#define HCI_COMMAND_PKT 0x01
@@ -242,6 +243,8 @@ enum {
#define HCI_AT_GENERAL_BONDING_MITM 0x05
/* ----- HCI Commands ---- */
+#define HCI_OP_NOP 0x0000
+
#define HCI_OP_INQUIRY 0x0401
struct hci_cp_inquiry {
__u8 lap[3];
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 6163bff..51dd73b 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -128,7 +128,6 @@ struct hci_dev {
unsigned int acl_pkts;
unsigned int sco_pkts;
- unsigned long cmd_last_tx;
unsigned long acl_last_tx;
unsigned long sco_last_tx;
@@ -138,6 +137,7 @@ struct hci_dev {
struct work_struct power_off;
struct timer_list off_timer;
+ struct timer_list cmd_timer;
struct tasklet_struct cmd_task;
struct tasklet_struct rx_task;
struct tasklet_struct tx_task;
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 2f00322..069c2bc 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -41,6 +41,7 @@
#include <linux/interrupt.h>
#include <linux/notifier.h>
#include <linux/rfkill.h>
+#include <linux/timer.h>
#include <net/sock.h>
#include <asm/system.h>
@@ -611,6 +612,7 @@ static int hci_dev_do_close(struct hci_dev *hdev)
/* Drop last sent command */
if (hdev->sent_cmd) {
+ del_timer_sync(&hdev->cmd_timer);
kfree_skb(hdev->sent_cmd);
hdev->sent_cmd = NULL;
}
@@ -1054,6 +1056,16 @@ int hci_remove_link_key(struct hci_dev *hdev, bdaddr_t *bdaddr)
return 0;
}
+/* HCI command timer function */
+static void hci_cmd_timer(unsigned long arg)
+{
+ struct hci_dev *hdev = (void *) arg;
+
+ BT_ERR("%s command tx timeout", hdev->name);
+ atomic_set(&hdev->cmd_cnt, 1);
+ tasklet_schedule(&hdev->cmd_task);
+}
+
/* Register HCI device */
int hci_register_dev(struct hci_dev *hdev)
{
@@ -1100,6 +1112,8 @@ int hci_register_dev(struct hci_dev *hdev)
skb_queue_head_init(&hdev->cmd_q);
skb_queue_head_init(&hdev->raw_q);
+ setup_timer(&hdev->cmd_timer, hci_cmd_timer, (unsigned long) hdev);
+
for (i = 0; i < NUM_REASSEMBLY; i++)
hdev->reassembly[i] = NULL;
@@ -1936,11 +1950,6 @@ static void hci_cmd_task(unsigned long arg)
BT_DBG("%s cmd %d", hdev->name, atomic_read(&hdev->cmd_cnt));
- if (!atomic_read(&hdev->cmd_cnt) && time_after(jiffies, hdev->cmd_last_tx + HZ)) {
- BT_ERR("%s command tx timeout", hdev->name);
- atomic_set(&hdev->cmd_cnt, 1);
- }
-
/* Send queued commands */
if (atomic_read(&hdev->cmd_cnt)) {
skb = skb_dequeue(&hdev->cmd_q);
@@ -1953,7 +1962,8 @@ static void hci_cmd_task(unsigned long arg)
if (hdev->sent_cmd) {
atomic_dec(&hdev->cmd_cnt);
hci_send_frame(skb);
- hdev->cmd_last_tx = jiffies;
+ mod_timer(&hdev->cmd_timer,
+ jiffies + msecs_to_jiffies(HCI_CMD_TIMEOUT));
} else {
skb_queue_head(&hdev->cmd_q, skb);
tasklet_schedule(&hdev->cmd_task);
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index cee46cb..3836fd3 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1672,6 +1672,9 @@ static inline void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *sk
break;
}
+ if (ev->opcode != HCI_OP_NOP)
+ del_timer(&hdev->cmd_timer);
+
if (ev->ncmd) {
atomic_set(&hdev->cmd_cnt, 1);
if (!skb_queue_empty(&hdev->cmd_q))
@@ -1743,6 +1746,9 @@ static inline void hci_cmd_status_evt(struct hci_dev *hdev, struct sk_buff *skb)
break;
}
+ if (ev->opcode != HCI_OP_NOP)
+ del_timer(&hdev->cmd_timer);
+
if (ev->ncmd) {
atomic_set(&hdev->cmd_cnt, 1);
if (!skb_queue_empty(&hdev->cmd_q))
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] Bluetooth: Use proper timer for hci command timout
2011-02-14 11:36 [PATCH v2] Bluetooth: Use proper timer for hci command timout ville.tervo
@ 2011-02-14 14:40 ` Gustavo F. Padovan
0 siblings, 0 replies; 2+ messages in thread
From: Gustavo F. Padovan @ 2011-02-14 14:40 UTC (permalink / raw)
To: ville.tervo; +Cc: linux-bluetooth
Hi Ville,
* ville.tervo@nokia.com <ville.tervo@nokia.com> [2011-02-14 13:36:12 +0200]:
> From: Ville Tervo <ville.tervo@nokia.com>
>
> Use proper timer instead of hci command flow control to timeout
> failed hci commands. Otherwise stack ends up sending commands
> when flow control is used to block new commands.
>
> 2010-09-01 18:29:41.592132 < HCI Command: Remote Name Request (0x01|0x0019) plen 10
> bdaddr 00:16:CF:E1:C7:D7 mode 2 clkoffset 0x0000
> 2010-09-01 18:29:41.592681 > HCI Event: Command Status (0x0f) plen 4
> Remote Name Request (0x01|0x0019) status 0x00 ncmd 0
> 2010-09-01 18:29:51.022033 < HCI Command: Remote Name Request Cancel (0x01|0x001a) plen 6
> bdaddr 00:16:CF:E1:C7:D7
>
> Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
> ---
> include/net/bluetooth/hci.h | 3 +++
> include/net/bluetooth/hci_core.h | 2 +-
> net/bluetooth/hci_core.c | 22 ++++++++++++++++------
> net/bluetooth/hci_event.c | 6 ++++++
> 4 files changed, 26 insertions(+), 7 deletions(-)
Patch has been applied. Thanks.
--
Gustavo F. Padovan
http://profusion.mobi
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-02-14 14:40 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-02-14 11:36 [PATCH v2] Bluetooth: Use proper timer for hci command timout ville.tervo
2011-02-14 14:40 ` Gustavo F. Padovan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.