* [PATCH 1/2] ath6kl: Remove dead code with undefined EXPORT_HCI_BRIDGE_INTERFACE
@ 2011-05-04 15:58 Vasanthakumar Thiagarajan
2011-05-04 15:58 ` [PATCH 2/2] ath6kl: Merge Bootloader Management Interface (BMI) related header files into one Vasanthakumar Thiagarajan
2011-05-06 16:33 ` [PATCH 1/2] ath6kl: Remove dead code with undefined EXPORT_HCI_BRIDGE_INTERFACE Greg KH
0 siblings, 2 replies; 6+ messages in thread
From: Vasanthakumar Thiagarajan @ 2011-05-04 15:58 UTC (permalink / raw)
To: greg
Cc: devel, linux-wireless, Vipin.Mehta, Naveen.Singh,
Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
---
drivers/staging/ath6kl/miscdrv/ar3kconfig.c | 4 -
drivers/staging/ath6kl/os/linux/ar6000_drv.c | 33 -----
.../staging/ath6kl/os/linux/export_hci_transport.c | 124 ------------------
drivers/staging/ath6kl/os/linux/hci_bridge.c | 137 --------------------
.../staging/ath6kl/os/linux/include/ar6000_drv.h | 4 -
.../ath6kl/os/linux/include/export_hci_transport.h | 76 -----------
drivers/staging/ath6kl/os/linux/netbuf.c | 8 -
7 files changed, 0 insertions(+), 386 deletions(-)
delete mode 100644 drivers/staging/ath6kl/os/linux/export_hci_transport.c
delete mode 100644 drivers/staging/ath6kl/os/linux/include/export_hci_transport.h
diff --git a/drivers/staging/ath6kl/miscdrv/ar3kconfig.c b/drivers/staging/ath6kl/miscdrv/ar3kconfig.c
index e0ea218..be84cfb 100644
--- a/drivers/staging/ath6kl/miscdrv/ar3kconfig.c
+++ b/drivers/staging/ath6kl/miscdrv/ar3kconfig.c
@@ -28,11 +28,7 @@
#define ATH_MODULE_NAME misc
#include "a_debug.h"
#include "common_drv.h"
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
-#include "export_hci_transport.h"
-#else
#include "hci_transport_api.h"
-#endif
#include "ar3kconfig.h"
#include "tlpm.h"
diff --git a/drivers/staging/ath6kl/os/linux/ar6000_drv.c b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
index 513f205..aece57a 100644
--- a/drivers/staging/ath6kl/os/linux/ar6000_drv.c
+++ b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
@@ -110,11 +110,6 @@ A_TIMER aptcTimer;
APTC_TRAFFIC_RECORD aptcTR;
#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
-// callbacks registered by HCI transport driver
-struct hci_transport_callbacks ar6kHciTransCallbacks = { NULL };
-#endif
-
unsigned int processDot11Hdr = 0;
char ifname[IFNAMSIZ] = {0,};
@@ -149,11 +144,9 @@ unsigned int nohifscattersupport = NOHIFSCATTERSUPPORT_DEFAULT;
unsigned int setuphci = SETUPHCI_DEFAULT;
unsigned int loghci = 0;
unsigned int setupbtdev = SETUPBTDEV_DEFAULT;
-#ifndef EXPORT_HCI_BRIDGE_INTERFACE
unsigned int ar3khcibaud = AR3KHCIBAUD_DEFAULT;
unsigned int hciuartscale = HCIUARTSCALE_DEFAULT;
unsigned int hciuartstep = HCIUARTSTEP_DEFAULT;
-#endif
unsigned int csumOffload=0;
unsigned int csumOffloadTest=0;
unsigned int eppingtest=0;
@@ -189,11 +182,9 @@ module_param(panic_on_assert, uint, 0644);
module_param(setuphci, uint, 0644);
module_param(loghci, uint, 0644);
module_param(setupbtdev, uint, 0644);
-#ifndef EXPORT_HCI_BRIDGE_INTERFACE
module_param(ar3khcibaud, uint, 0644);
module_param(hciuartscale, uint, 0644);
module_param(hciuartstep, uint, 0644);
-#endif
module_param(eppingtest, uint, 0644);
/* in 2.6.10 and later this is now a pointer to a uint */
@@ -1956,11 +1947,6 @@ ar6000_stop_endpoint(struct net_device *dev, bool keepprofile, bool getdbglogs)
}
if (ar->arHtcTarget != NULL) {
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
- if (NULL != ar6kHciTransCallbacks.cleanupTransport) {
- ar6kHciTransCallbacks.cleanupTransport(NULL);
- }
-#else
// FIXME: workaround to reset BT's UART baud rate to default
if (NULL != ar->exitCallback) {
struct ar3k_config_info ar3kconfig;
@@ -1976,7 +1962,6 @@ ar6000_stop_endpoint(struct net_device *dev, bool keepprofile, bool getdbglogs)
// END workaround
if (setuphci)
ar6000_cleanup_hci(ar);
-#endif
AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" Shutting down HTC .... \n"));
/* stop HTC */
HTCStop(ar->arHtcTarget);
@@ -2652,21 +2637,10 @@ int ar6000_init(struct net_device *dev)
ar->arAcStreamPriMap[WMM_AC_VI] = 2; /* */
ar->arAcStreamPriMap[WMM_AC_VO] = 3; /* highest */
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
- if (setuphci && (NULL != ar6kHciTransCallbacks.setupTransport)) {
- struct hci_transport_misc_handles hciHandles;
-
- hciHandles.netDevice = ar->arNetDev;
- hciHandles.hifDevice = ar->arHifDevice;
- hciHandles.htcHandle = ar->arHtcTarget;
- status = (int)(ar6kHciTransCallbacks.setupTransport(&hciHandles));
- }
-#else
if (setuphci) {
/* setup HCI */
status = ar6000_setup_hci(ar);
}
-#endif
} while (false);
@@ -3136,11 +3110,9 @@ ar6000_data_tx(struct sk_buff *skb, struct net_device *dev)
if (ac == HCI_TRANSPORT_STREAM_NUM) {
/* pass this to HCI */
-#ifndef EXPORT_HCI_BRIDGE_INTERFACE
if (!hci_test_send(ar,skb)) {
return 0;
}
-#endif
/* set AC to discard this skb */
ac = AC_NOT_MAPPED;
} else {
@@ -6232,8 +6204,3 @@ int ar6000_remove_ap_interface(struct ar6_softc *ar)
return 0;
}
#endif /* CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */
-
-
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
-EXPORT_SYMBOL(setupbtdev);
-#endif
diff --git a/drivers/staging/ath6kl/os/linux/export_hci_transport.c b/drivers/staging/ath6kl/os/linux/export_hci_transport.c
deleted file mode 100644
index 430998e..0000000
--- a/drivers/staging/ath6kl/os/linux/export_hci_transport.c
+++ /dev/null
@@ -1,124 +0,0 @@
-//------------------------------------------------------------------------------
-// Copyright (c) 2009-2010 Atheros Corporation. All rights reserved.
-//
-//
-// Permission to use, copy, modify, and/or distribute this software for any
-// purpose with or without fee is hereby granted, provided that the above
-// copyright notice and this permission notice appear in all copies.
-//
-// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-//
-//
-//------------------------------------------------------------------------------
-//==============================================================================
-// HCI bridge implementation
-//
-// Author(s): ="Atheros"
-//==============================================================================
-#include <a_config.h>
-#include <athdefs.h>
-#include "a_osapi.h"
-#include "htc_api.h"
-#include "a_drv.h"
-#include "hif.h"
-#include "common_drv.h"
-#include "a_debug.h"
-#include "hci_transport_api.h"
-
-#include "AR6002/hw4.0/hw/apb_athr_wlan_map.h"
-#include "AR6002/hw4.0/hw/uart_reg.h"
-#include "AR6002/hw4.0/hw/rtc_wlan_reg.h"
-
-HCI_TRANSPORT_HANDLE (*_HCI_TransportAttach)(void *HTCHandle, struct hci_transport_config_info *pInfo);
-void (*_HCI_TransportDetach)(HCI_TRANSPORT_HANDLE HciTrans);
-int (*_HCI_TransportAddReceivePkts)(HCI_TRANSPORT_HANDLE HciTrans, struct htc_packet_queue *pQueue);
-int (*_HCI_TransportSendPkt)(HCI_TRANSPORT_HANDLE HciTrans, struct htc_packet *pPacket, bool Synchronous);
-void (*_HCI_TransportStop)(HCI_TRANSPORT_HANDLE HciTrans);
-int (*_HCI_TransportStart)(HCI_TRANSPORT_HANDLE HciTrans);
-int (*_HCI_TransportEnableDisableAsyncRecv)(HCI_TRANSPORT_HANDLE HciTrans, bool Enable);
-int (*_HCI_TransportRecvHCIEventSync)(HCI_TRANSPORT_HANDLE HciTrans,
- struct htc_packet *pPacket,
- int MaxPollMS);
-int (*_HCI_TransportSetBaudRate)(HCI_TRANSPORT_HANDLE HciTrans, u32 Baud);
-int (*_HCI_TransportEnablePowerMgmt)(HCI_TRANSPORT_HANDLE HciTrans, bool Enable);
-
-extern struct hci_transport_callbacks ar6kHciTransCallbacks;
-
-int ar6000_register_hci_transport(struct hci_transport_callbacks *hciTransCallbacks)
-{
- ar6kHciTransCallbacks = *hciTransCallbacks;
-
- _HCI_TransportAttach = HCI_TransportAttach;
- _HCI_TransportDetach = HCI_TransportDetach;
- _HCI_TransportAddReceivePkts = HCI_TransportAddReceivePkts;
- _HCI_TransportSendPkt = HCI_TransportSendPkt;
- _HCI_TransportStop = HCI_TransportStop;
- _HCI_TransportStart = HCI_TransportStart;
- _HCI_TransportEnableDisableAsyncRecv = HCI_TransportEnableDisableAsyncRecv;
- _HCI_TransportRecvHCIEventSync = HCI_TransportRecvHCIEventSync;
- _HCI_TransportSetBaudRate = HCI_TransportSetBaudRate;
- _HCI_TransportEnablePowerMgmt = HCI_TransportEnablePowerMgmt;
-
- return 0;
-}
-
-int
-ar6000_get_hif_dev(struct hif_device *device, void *config)
-{
- int status;
-
- status = HIFConfigureDevice(device,
- HIF_DEVICE_GET_OS_DEVICE,
- (struct hif_device_os_device_info *)config,
- sizeof(struct hif_device_os_device_info));
- return status;
-}
-
-int ar6000_set_uart_config(struct hif_device *hifDevice,
- u32 scale,
- u32 step)
-{
- u32 regAddress;
- u32 regVal;
- int status;
-
- regAddress = WLAN_UART_BASE_ADDRESS | UART_CLKDIV_ADDRESS;
- regVal = ((u32)scale << 16) | step;
- /* change the HCI UART scale/step values through the diagnostic window */
- status = ar6000_WriteRegDiag(hifDevice, ®Address, ®Val);
-
- return status;
-}
-
-int ar6000_get_core_clock_config(struct hif_device *hifDevice, u32 *data)
-{
- u32 regAddress;
- int status;
-
- regAddress = WLAN_RTC_BASE_ADDRESS | WLAN_CPU_CLOCK_ADDRESS;
- /* read CPU clock settings*/
- status = ar6000_ReadRegDiag(hifDevice, ®Address, data);
-
- return status;
-}
-
-EXPORT_SYMBOL(ar6000_register_hci_transport);
-EXPORT_SYMBOL(ar6000_get_hif_dev);
-EXPORT_SYMBOL(ar6000_set_uart_config);
-EXPORT_SYMBOL(ar6000_get_core_clock_config);
-EXPORT_SYMBOL(_HCI_TransportAttach);
-EXPORT_SYMBOL(_HCI_TransportDetach);
-EXPORT_SYMBOL(_HCI_TransportAddReceivePkts);
-EXPORT_SYMBOL(_HCI_TransportSendPkt);
-EXPORT_SYMBOL(_HCI_TransportStop);
-EXPORT_SYMBOL(_HCI_TransportStart);
-EXPORT_SYMBOL(_HCI_TransportEnableDisableAsyncRecv);
-EXPORT_SYMBOL(_HCI_TransportRecvHCIEventSync);
-EXPORT_SYMBOL(_HCI_TransportSetBaudRate);
-EXPORT_SYMBOL(_HCI_TransportEnablePowerMgmt);
diff --git a/drivers/staging/ath6kl/os/linux/hci_bridge.c b/drivers/staging/ath6kl/os/linux/hci_bridge.c
index 6087edc..d445a72 100644
--- a/drivers/staging/ath6kl/os/linux/hci_bridge.c
+++ b/drivers/staging/ath6kl/os/linux/hci_bridge.c
@@ -22,31 +22,10 @@
// Author(s): ="Atheros"
//==============================================================================
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
-#include <linux/etherdevice.h>
-#include <a_config.h>
-#include <athdefs.h>
-#include "a_osapi.h"
-#include "htc_api.h"
-#include "wmi.h"
-#include "a_drv.h"
-#include "hif.h"
-#include "common_drv.h"
-#include "a_debug.h"
-#define ATH_DEBUG_HCI_BRIDGE ATH_DEBUG_MAKE_MODULE_MASK(6)
-#define ATH_DEBUG_HCI_RECV ATH_DEBUG_MAKE_MODULE_MASK(7)
-#define ATH_DEBUG_HCI_SEND ATH_DEBUG_MAKE_MODULE_MASK(8)
-#define ATH_DEBUG_HCI_DUMP ATH_DEBUG_MAKE_MODULE_MASK(9)
-#else
#include "ar6000_drv.h"
-#endif /* EXPORT_HCI_BRIDGE_INTERFACE */
#ifdef ATH_AR6K_ENABLE_GMBOX
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
-#include "export_hci_transport.h"
-#else
#include "hci_transport_api.h"
-#endif
#include "epping_test.h"
#include "gmboxif.h"
#include "ar3kconfig.h"
@@ -58,19 +37,9 @@
#define CONFIG_BLUEZ_HCI_BRIDGE
#endif
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
-unsigned int ar3khcibaud = 0;
-unsigned int hciuartscale = 0;
-unsigned int hciuartstep = 0;
-
-module_param(ar3khcibaud, int, 0644);
-module_param(hciuartscale, int, 0644);
-module_param(hciuartstep, int, 0644);
-#else
extern unsigned int ar3khcibaud;
extern unsigned int hciuartscale;
extern unsigned int hciuartstep;
-#endif /* EXPORT_HCI_BRIDGE_INTERFACE */
struct ar6k_hci_bridge_info {
void *pHCIDev; /* HCI bridge device */
@@ -81,11 +50,7 @@ struct ar6k_hci_bridge_info {
struct htc_packet_queue HTCPacketStructHead;
u8 *pHTCStructAlloc;
spinlock_t BridgeLock;
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
- struct hci_transport_misc_handles HCITransHdl;
-#else
struct ar6_softc *ar;
-#endif /* EXPORT_HCI_BRIDGE_INTERFACE */
};
#define MAX_ACL_RECV_BUFS 16
@@ -101,10 +66,6 @@ struct ar6k_hci_bridge_info {
extern unsigned int setupbtdev;
struct ar3k_config_info ar3kconfig;
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
-struct ar6k_hci_bridge_info *g_pHcidevInfo;
-#endif
-
static int bt_setup_hci(struct ar6k_hci_bridge_info *pHcidevInfo);
static void bt_cleanup_hci(struct ar6k_hci_bridge_info *pHcidevInfo);
static int bt_register_hci(struct ar6k_hci_bridge_info *pHcidevInfo);
@@ -114,16 +75,10 @@ static bool bt_indicate_recv(struct ar6k_hci_bridge_info *pHcidevInfo,
static struct sk_buff *bt_alloc_buffer(struct ar6k_hci_bridge_info *pHcidevInfo, int Length);
static void bt_free_buffer(struct ar6k_hci_bridge_info *pHcidevInfo, struct sk_buff *skb);
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
-int ar6000_setup_hci(void *ar);
-void ar6000_cleanup_hci(void *ar);
-int hci_test_send(void *ar, struct sk_buff *skb);
-#else
int ar6000_setup_hci(struct ar6_softc *ar);
void ar6000_cleanup_hci(struct ar6_softc *ar);
/* HCI bridge testing */
int hci_test_send(struct ar6_softc *ar, struct sk_buff *skb);
-#endif /* EXPORT_HCI_BRIDGE_INTERFACE */
#define LOCK_BRIDGE(dev) spin_lock_bh(&(dev)->BridgeLock)
#define UNLOCK_BRIDGE(dev) spin_unlock_bh(&(dev)->BridgeLock)
@@ -233,11 +188,7 @@ static int ar6000_hci_transport_ready(HCI_TRANSPORT_HANDLE HCIHandle,
pHcidevInfo->HCIProps.TailRoom,
pHcidevInfo->HCIProps.IOBlockPad));
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
- A_ASSERT((pProps->HeadRoom + pProps->TailRoom) <= (struct net_device *)(pHcidevInfo->HCITransHdl.netDevice)->hard_header_len);
-#else
A_ASSERT((pProps->HeadRoom + pProps->TailRoom) <= pHcidevInfo->ar->arNetDev->hard_header_len);
-#endif
/* provide buffers */
RefillRecvBuffers(pHcidevInfo, HCI_ACL_TYPE, MAX_ACL_RECV_BUFS);
@@ -268,11 +219,7 @@ static int ar6000_hci_transport_ready(HCI_TRANSPORT_HANDLE HCIHandle,
A_MEMZERO(&ar3kconfig,sizeof(ar3kconfig));
ar3kconfig.pHCIDev = pHcidevInfo->pHCIDev;
ar3kconfig.pHCIProps = &pHcidevInfo->HCIProps;
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
- ar3kconfig.pHIFDevice = (struct hif_device *)(pHcidevInfo->HCITransHdl.hifDevice);
-#else
ar3kconfig.pHIFDevice = pHcidevInfo->ar->arHifDevice;
-#endif
ar3kconfig.pBtStackHCIDev = pHcidevInfo->pBtStackHCIDev;
if (ar3khcibaud != 0) {
@@ -405,15 +352,9 @@ static void ar6000_hci_pkt_recv(void *pContext, struct htc_packet *pPacket)
}
/* for testing, indicate packet to the network stack */
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
- skb->dev = (struct net_device *)(pHcidevInfo->HCITransHdl.netDevice);
- if ((((struct net_device *)pHcidevInfo->HCITransHdl.netDevice)->flags & IFF_UP) == IFF_UP) {
- skb->protocol = eth_type_trans(skb, (struct net_device *)(pHcidevInfo->HCITransHdl.netDevice));
-#else
skb->dev = pHcidevInfo->ar->arNetDev;
if ((pHcidevInfo->ar->arNetDev->flags & IFF_UP) == IFF_UP) {
skb->protocol = eth_type_trans(skb, pHcidevInfo->ar->arNetDev);
-#endif
netif_rx(skb);
skb = NULL;
}
@@ -462,11 +403,7 @@ static HCI_SEND_FULL_ACTION ar6000_hci_pkt_send_full(void *pContext, struct htc
return action;
}
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
-int ar6000_setup_hci(void *ar)
-#else
int ar6000_setup_hci(struct ar6_softc *ar)
-#endif
{
struct hci_transport_config_info config;
int status = 0;
@@ -485,13 +422,8 @@ int ar6000_setup_hci(struct ar6_softc *ar)
}
A_MEMZERO(pHcidevInfo, sizeof(struct ar6k_hci_bridge_info));
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
- g_pHcidevInfo = pHcidevInfo;
- pHcidevInfo->HCITransHdl = *(struct hci_transport_misc_handles *)ar;
-#else
ar->hcidev_info = pHcidevInfo;
pHcidevInfo->ar = ar;
-#endif
spin_lock_init(&pHcidevInfo->BridgeLock);
INIT_HTC_PACKET_QUEUE(&pHcidevInfo->HTCPacketStructHead);
@@ -533,11 +465,7 @@ int ar6000_setup_hci(struct ar6_softc *ar)
config.pHCIPktRecvRefill = ar6000_hci_pkt_refill;
config.pHCISendFull = ar6000_hci_pkt_send_full;
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
- pHcidevInfo->pHCIDev = HCI_TransportAttach(pHcidevInfo->HCITransHdl.htcHandle, &config);
-#else
pHcidevInfo->pHCIDev = HCI_TransportAttach(ar->arHtcTarget, &config);
-#endif
if (NULL == pHcidevInfo->pHCIDev) {
status = A_ERROR;
@@ -559,17 +487,9 @@ int ar6000_setup_hci(struct ar6_softc *ar)
return status;
}
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
-void ar6000_cleanup_hci(void *ar)
-#else
void ar6000_cleanup_hci(struct ar6_softc *ar)
-#endif
{
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
- struct ar6k_hci_bridge_info *pHcidevInfo = g_pHcidevInfo;
-#else
struct ar6k_hci_bridge_info *pHcidevInfo = (struct ar6k_hci_bridge_info *)ar->hcidev_info;
-#endif
if (pHcidevInfo != NULL) {
bt_cleanup_hci(pHcidevInfo);
@@ -586,30 +506,20 @@ void ar6000_cleanup_hci(struct ar6_softc *ar)
}
kfree(pHcidevInfo);
-#ifndef EXPORT_HCI_BRIDGE_INTERFACE
ar->hcidev_info = NULL;
-#endif
}
}
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
-int hci_test_send(void *ar, struct sk_buff *skb)
-#else
int hci_test_send(struct ar6_softc *ar, struct sk_buff *skb)
-#endif
{
int status = 0;
int length;
EPPING_HEADER *pHeader;
struct htc_packet *pPacket;
HTC_TX_TAG htc_tag = AR6K_DATA_PKT_TAG;
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
- struct ar6k_hci_bridge_info *pHcidevInfo = g_pHcidevInfo;
-#else
struct ar6k_hci_bridge_info *pHcidevInfo = (struct ar6k_hci_bridge_info *)ar->hcidev_info;
-#endif
do {
@@ -866,15 +776,10 @@ static int bt_setup_hci(struct ar6k_hci_bridge_info *pHcidevInfo)
A_MEMZERO(&osDevInfo,sizeof(osDevInfo));
/* get the underlying OS device */
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
- status = ar6000_get_hif_dev((struct hif_device *)(pHcidevInfo->HCITransHdl.hifDevice),
- &osDevInfo);
-#else
status = HIFConfigureDevice(pHcidevInfo->ar->arHifDevice,
HIF_DEVICE_GET_OS_DEVICE,
&osDevInfo,
sizeof(osDevInfo));
-#endif
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to OS device info from HIF\n"));
@@ -1076,66 +981,24 @@ static void bt_free_buffer(struct ar6k_hci_bridge_info *pHcidevInfo, struct sk_b
/* stubs when GMBOX support is not needed */
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
-int ar6000_setup_hci(void *ar)
-#else
int ar6000_setup_hci(struct ar6_softc *ar)
-#endif
{
return 0;
}
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
-void ar6000_cleanup_hci(void *ar)
-#else
void ar6000_cleanup_hci(struct ar6_softc *ar)
-#endif
{
return;
}
-#ifndef EXPORT_HCI_BRIDGE_INTERFACE
void ar6000_set_default_ar3kconfig(struct ar6_softc *ar, void *ar3kconfig)
{
return;
}
-#endif
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
-int hci_test_send(void *ar, struct sk_buff *skb)
-#else
int hci_test_send(struct ar6_softc *ar, struct sk_buff *skb)
-#endif
{
return -EOPNOTSUPP;
}
#endif // } ATH_AR6K_ENABLE_GMBOX
-
-
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
-static int __init
-hcibridge_init_module(void)
-{
- int status;
- struct hci_transport_callbacks hciTransCallbacks;
-
- hciTransCallbacks.setupTransport = ar6000_setup_hci;
- hciTransCallbacks.cleanupTransport = ar6000_cleanup_hci;
-
- status = ar6000_register_hci_transport(&hciTransCallbacks);
- if (status)
- return -ENODEV;
-
- return 0;
-}
-
-static void __exit
-hcibridge_cleanup_module(void)
-{
-}
-
-module_init(hcibridge_init_module);
-module_exit(hcibridge_cleanup_module);
-MODULE_LICENSE("Dual BSD/GPL");
-#endif
diff --git a/drivers/staging/ath6kl/os/linux/include/ar6000_drv.h b/drivers/staging/ath6kl/os/linux/include/ar6000_drv.h
index 22453b0..ba0c02b 100644
--- a/drivers/staging/ath6kl/os/linux/include/ar6000_drv.h
+++ b/drivers/staging/ath6kl/os/linux/include/ar6000_drv.h
@@ -605,9 +605,7 @@ struct ar6_softc {
bool DTIMExpired; /* flag to indicate DTIM expired */
u8 intra_bss; /* enable/disable intra bss data forward */
void *aggr_cntxt;
-#ifndef EXPORT_HCI_BRIDGE_INTERFACE
void *hcidev_info;
-#endif
WMI_AP_MODE_STAT arAPStats;
u8 ap_hidden_ssid;
u8 ap_country_code[3];
@@ -748,14 +746,12 @@ u8 remove_sta(struct ar6_softc *ar, u8 *mac, u16 reason);
/* HCI support */
-#ifndef EXPORT_HCI_BRIDGE_INTERFACE
int ar6000_setup_hci(struct ar6_softc *ar);
void ar6000_cleanup_hci(struct ar6_softc *ar);
void ar6000_set_default_ar3kconfig(struct ar6_softc *ar, void *ar3kconfig);
/* HCI bridge testing */
int hci_test_send(struct ar6_softc *ar, struct sk_buff *skb);
-#endif
ATH_DEBUG_DECLARE_EXTERN(htc);
ATH_DEBUG_DECLARE_EXTERN(wmi);
diff --git a/drivers/staging/ath6kl/os/linux/include/export_hci_transport.h b/drivers/staging/ath6kl/os/linux/include/export_hci_transport.h
deleted file mode 100644
index 74f9861..0000000
--- a/drivers/staging/ath6kl/os/linux/include/export_hci_transport.h
+++ /dev/null
@@ -1,76 +0,0 @@
-//------------------------------------------------------------------------------
-// Copyright (c) 2009-2010 Atheros Corporation. All rights reserved.
-//
-//
-// Permission to use, copy, modify, and/or distribute this software for any
-// purpose with or without fee is hereby granted, provided that the above
-// copyright notice and this permission notice appear in all copies.
-//
-// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-//
-//
-//------------------------------------------------------------------------------
-//==============================================================================
-// HCI bridge implementation
-//
-// Author(s): ="Atheros"
-//==============================================================================
-
-#include "hci_transport_api.h"
-#include "common_drv.h"
-
-extern HCI_TRANSPORT_HANDLE (*_HCI_TransportAttach)(void *HTCHandle, struct hci_transport_config_info *pInfo);
-extern void (*_HCI_TransportDetach)(HCI_TRANSPORT_HANDLE HciTrans);
-extern int (*_HCI_TransportAddReceivePkts)(HCI_TRANSPORT_HANDLE HciTrans, struct htc_packet_queue *pQueue);
-extern int (*_HCI_TransportSendPkt)(HCI_TRANSPORT_HANDLE HciTrans, struct htc_packet *pPacket, bool Synchronous);
-extern void (*_HCI_TransportStop)(HCI_TRANSPORT_HANDLE HciTrans);
-extern int (*_HCI_TransportStart)(HCI_TRANSPORT_HANDLE HciTrans);
-extern int (*_HCI_TransportEnableDisableAsyncRecv)(HCI_TRANSPORT_HANDLE HciTrans, bool Enable);
-extern int (*_HCI_TransportRecvHCIEventSync)(HCI_TRANSPORT_HANDLE HciTrans,
- struct htc_packet *pPacket,
- int MaxPollMS);
-extern int (*_HCI_TransportSetBaudRate)(HCI_TRANSPORT_HANDLE HciTrans, u32 Baud);
-extern int (*_HCI_TransportEnablePowerMgmt)(HCI_TRANSPORT_HANDLE HciTrans, bool Enable);
-
-
-#define HCI_TransportAttach(HTCHandle, pInfo) \
- _HCI_TransportAttach((HTCHandle), (pInfo))
-#define HCI_TransportDetach(HciTrans) \
- _HCI_TransportDetach(HciTrans)
-#define HCI_TransportAddReceivePkts(HciTrans, pQueue) \
- _HCI_TransportAddReceivePkts((HciTrans), (pQueue))
-#define HCI_TransportSendPkt(HciTrans, pPacket, Synchronous) \
- _HCI_TransportSendPkt((HciTrans), (pPacket), (Synchronous))
-#define HCI_TransportStop(HciTrans) \
- _HCI_TransportStop((HciTrans))
-#define HCI_TransportStart(HciTrans) \
- _HCI_TransportStart((HciTrans))
-#define HCI_TransportEnableDisableAsyncRecv(HciTrans, Enable) \
- _HCI_TransportEnableDisableAsyncRecv((HciTrans), (Enable))
-#define HCI_TransportRecvHCIEventSync(HciTrans, pPacket, MaxPollMS) \
- _HCI_TransportRecvHCIEventSync((HciTrans), (pPacket), (MaxPollMS))
-#define HCI_TransportSetBaudRate(HciTrans, Baud) \
- _HCI_TransportSetBaudRate((HciTrans), (Baud))
-#define HCI_TransportEnablePowerMgmt(HciTrans, Enable) \
- _HCI_TransportEnablePowerMgmt((HciTrans), (Enable))
-
-
-extern int ar6000_register_hci_transport(struct hci_transport_callbacks *hciTransCallbacks);
-
-extern int ar6000_get_hif_dev(struct hif_device *device, void *config);
-
-extern int ar6000_set_uart_config(struct hif_device *hifDevice, u32 scale, u32 step);
-
-/* get core clock register settings
- * data: 0 - 40/44MHz
- * 1 - 80/88MHz
- * where (5G band/2.4G band)
- * assume 2.4G band for now
- */
-extern int ar6000_get_core_clock_config(struct hif_device *hifDevice, u32 *data);
diff --git a/drivers/staging/ath6kl/os/linux/netbuf.c b/drivers/staging/ath6kl/os/linux/netbuf.c
index 963a2fb..adcd760 100644
--- a/drivers/staging/ath6kl/os/linux/netbuf.c
+++ b/drivers/staging/ath6kl/os/linux/netbuf.c
@@ -221,11 +221,3 @@ a_netbuf_pull_data(void *bufPtr, char *dstPtr, s32 len)
return 0;
}
-
-#ifdef EXPORT_HCI_BRIDGE_INTERFACE
-EXPORT_SYMBOL(a_netbuf_to_data);
-EXPORT_SYMBOL(a_netbuf_put);
-EXPORT_SYMBOL(a_netbuf_pull);
-EXPORT_SYMBOL(a_netbuf_alloc);
-EXPORT_SYMBOL(a_netbuf_free);
-#endif
--
1.7.0.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/2] ath6kl: Merge Bootloader Management Interface (BMI) related header files into one
2011-05-04 15:58 [PATCH 1/2] ath6kl: Remove dead code with undefined EXPORT_HCI_BRIDGE_INTERFACE Vasanthakumar Thiagarajan
@ 2011-05-04 15:58 ` Vasanthakumar Thiagarajan
2011-05-06 16:33 ` [PATCH 1/2] ath6kl: Remove dead code with undefined EXPORT_HCI_BRIDGE_INTERFACE Greg KH
1 sibling, 0 replies; 6+ messages in thread
From: Vasanthakumar Thiagarajan @ 2011-05-04 15:58 UTC (permalink / raw)
To: greg
Cc: devel, linux-wireless, Vipin.Mehta, Naveen.Singh,
Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
---
drivers/staging/ath6kl/Makefile | 2 +-
drivers/staging/ath6kl/bmi/bmi.h | 338 +++++++++++++++++++++
drivers/staging/ath6kl/bmi/include/bmi_internal.h | 54 ----
drivers/staging/ath6kl/bmi/src/bmi.c | 109 ++++----
drivers/staging/ath6kl/htc2/htc_internal.h | 3 +-
drivers/staging/ath6kl/include/bmi.h | 134 --------
drivers/staging/ath6kl/include/common/bmi_msg.h | 233 --------------
drivers/staging/ath6kl/miscdrv/common_drv.c | 26 +-
drivers/staging/ath6kl/os/linux/ar6000_drv.c | 138 +++++-----
drivers/staging/ath6kl/os/linux/ar6000_raw_if.c | 6 +-
10 files changed, 480 insertions(+), 563 deletions(-)
create mode 100644 drivers/staging/ath6kl/bmi/bmi.h
delete mode 100644 drivers/staging/ath6kl/bmi/include/bmi_internal.h
delete mode 100644 drivers/staging/ath6kl/include/bmi.h
delete mode 100644 drivers/staging/ath6kl/include/common/bmi_msg.h
diff --git a/drivers/staging/ath6kl/Makefile b/drivers/staging/ath6kl/Makefile
index 1d3f239..b58c622 100644
--- a/drivers/staging/ath6kl/Makefile
+++ b/drivers/staging/ath6kl/Makefile
@@ -26,7 +26,7 @@ ccflags-y += -I$(obj)/include/common
ccflags-y += -I$(obj)/wlan/include
ccflags-y += -I$(obj)/os/linux/include
ccflags-y += -I$(obj)/os
-ccflags-y += -I$(obj)/bmi/include
+ccflags-y += -I$(obj)/bmi
ccflags-y += -I$(obj)/include/common/AR6002/hw4.0
ifeq ($(CONFIG_AR600x_DUAL_ANTENNA),y)
diff --git a/drivers/staging/ath6kl/bmi/bmi.h b/drivers/staging/ath6kl/bmi/bmi.h
new file mode 100644
index 0000000..0a83b1f
--- /dev/null
+++ b/drivers/staging/ath6kl/bmi/bmi.h
@@ -0,0 +1,338 @@
+/*
+ * Copyright (c) 2004-2010 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef BMI_H
+#define BMI_H
+
+#include "hif.h"
+#include "hw/mbox_wlan_host_reg.h"
+/*
+ * Bootloader Messaging Interface (BMI)
+ *
+ * BMI is a very simple messaging interface used during initialization
+ * to read memory, write memory, execute code, and to define an
+ * application entry PC.
+ *
+ * It is used to download an application to AR6K, to provide
+ * patches to code that is already resident on AR6K, and generally
+ * to examine and modify state. The Host has an opportunity to use
+ * BMI only once during bootup. Once the Host issues a BMI_DONE
+ * command, this opportunity ends.
+ *
+ * The Host writes BMI requests to mailbox0, and reads BMI responses
+ * from mailbox0. BMI requests all begin with a command
+ * (see below for specific commands), and are followed by
+ * command-specific data.
+ *
+ * Flow control:
+ * The Host can only issue a command once the Target gives it a
+ * "BMI Command Credit", using AR6K Counter #4. As soon as the
+ * Target has completed a command, it issues another BMI Command
+ * Credit (so the Host can issue the next command).
+ *
+ * BMI handles all required Target-side cache flushing.
+ */
+
+
+/* Maximum data size used for BMI transfers */
+#define BMI_DATASZ_MAX 256
+
+/* BMI Commands */
+
+#define BMI_NO_COMMAND 0
+
+#define BMI_DONE 1
+ /*
+ * Semantics: Host is done using BMI
+ * Request format:
+ * u32 command (BMI_DONE)
+ * Response format: none
+ */
+
+#define BMI_READ_MEMORY 2
+ /*
+ * Semantics: Host reads AR6K memory
+ * Request format:
+ * u32 command (BMI_READ_MEMORY)
+ * u32 address
+ * u32 length, at most BMI_DATASZ_MAX
+ * Response format:
+ * u8 data[length]
+ */
+
+#define BMI_WRITE_MEMORY 3
+ /*
+ * Semantics: Host writes AR6K memory
+ * Request format:
+ * u32 command (BMI_WRITE_MEMORY)
+ * u32 address
+ * u32 length, at most BMI_DATASZ_MAX
+ * u8 data[length]
+ * Response format: none
+ */
+
+#define BMI_EXECUTE 4
+ /*
+ * Semantics: Causes AR6K to execute code
+ * Request format:
+ * u32 command (BMI_EXECUTE)
+ * u32 address
+ * u32 parameter
+ * Response format:
+ * u32 return value
+ */
+
+#define BMI_SET_APP_START 5
+ /*
+ * Semantics: Set Target application starting address
+ * Request format:
+ * u32 command (BMI_SET_APP_START)
+ * u32 address
+ * Response format: none
+ */
+
+#define BMI_READ_SOC_REGISTER 6
+ /*
+ * Semantics: Read a 32-bit Target SOC register.
+ * Request format:
+ * u32 command (BMI_READ_REGISTER)
+ * u32 address
+ * Response format:
+ * u32 value
+ */
+
+#define BMI_WRITE_SOC_REGISTER 7
+ /*
+ * Semantics: Write a 32-bit Target SOC register.
+ * Request format:
+ * u32 command (BMI_WRITE_REGISTER)
+ * u32 address
+ * u32 value
+ *
+ * Response format: none
+ */
+
+#define BMI_GET_TARGET_ID 8
+#define BMI_GET_TARGET_INFO 8
+ /*
+ * Semantics: Fetch the 4-byte Target information
+ * Request format:
+ * u32 command (BMI_GET_TARGET_ID/INFO)
+ * Response format1 (old firmware):
+ * u32 TargetVersionID
+ * Response format2 (newer firmware):
+ * u32 TARGET_VERSION_SENTINAL
+ * struct bmi_target_info;
+ */
+
+#define TARGET_VERSION_SENTINAL 0xffffffff
+#define TARGET_TYPE_AR6001 1
+#define TARGET_TYPE_AR6002 2
+#define TARGET_TYPE_AR6003 3
+
+
+#define BMI_ROMPATCH_INSTALL 9
+ /*
+ * Semantics: Install a ROM Patch.
+ * Request format:
+ * u32 command (BMI_ROMPATCH_INSTALL)
+ * u32 Target ROM Address
+ * u32 Target RAM Address or Value (depending on Target Type)
+ * u32 Size, in bytes
+ * u32 Activate? 1-->activate;
+ * 0-->install but do not activate
+ * Response format:
+ * u32 PatchID
+ */
+
+#define BMI_ROMPATCH_UNINSTALL 10
+ /*
+ * Semantics: Uninstall a previously-installed ROM Patch,
+ * automatically deactivating, if necessary.
+ * Request format:
+ * u32 command (BMI_ROMPATCH_UNINSTALL)
+ * u32 PatchID
+ *
+ * Response format: none
+ */
+
+#define BMI_ROMPATCH_ACTIVATE 11
+ /*
+ * Semantics: Activate a list of previously-installed ROM Patches.
+ * Request format:
+ * u32 command (BMI_ROMPATCH_ACTIVATE)
+ * u32 rompatch_count
+ * u32 PatchID[rompatch_count]
+ *
+ * Response format: none
+ */
+
+#define BMI_ROMPATCH_DEACTIVATE 12
+ /*
+ * Semantics: Deactivate a list of active ROM Patches.
+ * Request format:
+ * u32 command (BMI_ROMPATCH_DEACTIVATE)
+ * u32 rompatch_count
+ * u32 PatchID[rompatch_count]
+ *
+ * Response format: none
+ */
+
+
+#define BMI_LZ_STREAM_START 13
+ /*
+ * Semantics: Begin an LZ-compressed stream of input
+ * which is to be uncompressed by the Target to an
+ * output buffer at address. The output buffer must
+ * be sufficiently large to hold the uncompressed
+ * output from the compressed input stream. This BMI
+ * command should be followed by a series of 1 or more
+ * BMI_LZ_DATA commands.
+ * u32 command (BMI_LZ_STREAM_START)
+ * u32 address
+ * Note: Not supported on all versions of ROM firmware.
+ */
+
+#define BMI_LZ_DATA 14
+ /*
+ * Semantics: Host writes AR6K memory with LZ-compressed
+ * data which is uncompressed by the Target. This command
+ * must be preceded by a BMI_LZ_STREAM_START command. A series
+ * of BMI_LZ_DATA commands are considered part of a single
+ * input stream until another BMI_LZ_STREAM_START is issued.
+ * Request format:
+ * u32 command (BMI_LZ_DATA)
+ * u32 length (of compressed data),
+ * at most BMI_DATASZ_MAX
+ * u8 CompressedData[length]
+ * Response format: none
+ * Note: Not supported on all versions of ROM firmware.
+ */
+
+#define ATH_DEBUG_BMI ATH_DEBUG_MAKE_MODULE_MASK(0)
+
+
+#define BMI_COMMUNICATION_TIMEOUT 100000
+
+struct bmi_target_info {
+ u32 target_info_byte_count; /* size of this structure */
+ u32 target_ver; /* Target Version ID */
+ u32 target_type; /* Target type */
+} __packed;
+
+void
+bmi_init(void);
+
+void
+bmi_cleanup(void);
+
+int
+bmi_done(struct hif_device *device);
+
+int
+bmi_get_target_info(struct hif_device *device, struct bmi_target_info *targ_info);
+
+int
+bmi_read_memory(struct hif_device *device,
+ u32 address,
+ u8 *buffer,
+ u32 length);
+
+int
+bmi_write_memory(struct hif_device *device,
+ u32 address,
+ u8 *buffer,
+ u32 length);
+
+int
+bmi_execute(struct hif_device *device,
+ u32 address,
+ u32 *param);
+
+int
+bmi_set_app_start(struct hif_device *device,
+ u32 address);
+
+int
+bmi_read_soc_register(struct hif_device *device,
+ u32 address,
+ u32 *param);
+
+int
+bmi_write_soc_register(struct hif_device *device,
+ u32 address,
+ u32 param);
+
+int
+bmi_rom_patch_install(struct hif_device *device,
+ u32 ROM_addr,
+ u32 RAM_addr,
+ u32 nbytes,
+ u32 do_activate,
+ u32 *patch_id);
+
+int
+bmi_rom_patch_uninstall(struct hif_device *device,
+ u32 rompatch_id);
+
+int
+bmi_rom_patch_activate(struct hif_device *device,
+ u32 rompatch_count,
+ u32 *rompatch_list);
+
+int
+bmi_rom_patch_deactivate(struct hif_device *device,
+ u32 rompatch_count,
+ u32 *rompatch_list);
+
+int
+bmi_lz_stream_start(struct hif_device *device,
+ u32 address);
+
+int
+bmi_lz_data(struct hif_device *device,
+ u8 *buffer,
+ u32 length);
+
+int
+bmi_fast_download(struct hif_device *device,
+ u32 address,
+ u8 *buffer,
+ u32 length);
+
+int
+bmi_raw_write(struct hif_device *device,
+ u8 *buffer,
+ u32 length);
+
+int
+bmi_raw_read(struct hif_device *device,
+ u8 *buffer,
+ u32 length,
+ bool want_timeout);
+
+int
+bmi_send_buf(struct hif_device *device,
+ u8 *buffer,
+ u32 length);
+
+int
+bmi_recv_buf(struct hif_device *device,
+ u8 *buffer,
+ u32 length,
+ bool want_timeout);
+
+#endif
diff --git a/drivers/staging/ath6kl/bmi/include/bmi_internal.h b/drivers/staging/ath6kl/bmi/include/bmi_internal.h
deleted file mode 100644
index 8e25770..0000000
--- a/drivers/staging/ath6kl/bmi/include/bmi_internal.h
+++ /dev/null
@@ -1,54 +0,0 @@
-//------------------------------------------------------------------------------
-// Copyright (c) 2004-2010 Atheros Communications Inc.
-// All rights reserved.
-//
-//
-// Permission to use, copy, modify, and/or distribute this software for any
-// purpose with or without fee is hereby granted, provided that the above
-// copyright notice and this permission notice appear in all copies.
-//
-// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-//
-//
-//------------------------------------------------------------------------------
-//==============================================================================
-//
-// Author(s): ="Atheros"
-//==============================================================================
-#ifndef BMI_INTERNAL_H
-#define BMI_INTERNAL_H
-
-#include "a_config.h"
-#include "athdefs.h"
-#include "a_osapi.h"
-#define ATH_MODULE_NAME bmi
-#include "a_debug.h"
-#include "hw/mbox_host_reg.h"
-#include "bmi_msg.h"
-
-#define ATH_DEBUG_BMI ATH_DEBUG_MAKE_MODULE_MASK(0)
-
-
-#define BMI_COMMUNICATION_TIMEOUT 100000
-
-/* ------ Global Variable Declarations ------- */
-static bool bmiDone;
-
-int
-bmiBufferSend(struct hif_device *device,
- u8 *buffer,
- u32 length);
-
-int
-bmiBufferReceive(struct hif_device *device,
- u8 *buffer,
- u32 length,
- bool want_timeout);
-
-#endif
diff --git a/drivers/staging/ath6kl/bmi/src/bmi.c b/drivers/staging/ath6kl/bmi/src/bmi.c
index f1f085e..31a9900 100644
--- a/drivers/staging/ath6kl/bmi/src/bmi.c
+++ b/drivers/staging/ath6kl/bmi/src/bmi.c
@@ -27,16 +27,19 @@
#include <string.h>
#endif
-#include "hif.h"
#include "bmi.h"
#include "htc_api.h"
-#include "bmi_internal.h"
+#include "a_debug.h"
+
+#define ATH_MODULE_NAME bmi
#ifdef ATH_DEBUG_MODULE
static struct ath_debug_mask_description bmi_debug_desc[] = {
{ ATH_DEBUG_BMI , "BMI Tracing"},
};
+bool bmiDone;
+
ATH_DEBUG_INSTANTIATE_MODULE_VAR(bmi,
"bmi",
"Boot Manager Interface",
@@ -64,7 +67,7 @@ static u8 *pBMICmdBuf;
/* APIs visible to the driver */
void
-BMIInit(void)
+bmi_init(void)
{
bmiDone = false;
pendingEventsFuncCheck = false;
@@ -92,7 +95,7 @@ BMIInit(void)
}
void
-BMICleanup(void)
+bmi_cleanup(void)
{
if (pBMICmdCredits) {
kfree(pBMICmdCredits);
@@ -106,13 +109,13 @@ BMICleanup(void)
}
int
-BMIDone(struct hif_device *device)
+bmi_done(struct hif_device *device)
{
int status;
u32 cid;
if (bmiDone) {
- AR_DEBUG_PRINTF (ATH_DEBUG_BMI, ("BMIDone skipped\n"));
+ AR_DEBUG_PRINTF (ATH_DEBUG_BMI, ("bmi_done skipped\n"));
return 0;
}
@@ -120,7 +123,7 @@ BMIDone(struct hif_device *device)
bmiDone = true;
cid = BMI_DONE;
- status = bmiBufferSend(device, (u8 *)&cid, sizeof(cid));
+ status = bmi_send_buf(device, (u8 *)&cid, sizeof(cid));
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
return A_ERROR;
@@ -142,7 +145,7 @@ BMIDone(struct hif_device *device)
}
int
-BMIGetTargetInfo(struct hif_device *device, struct bmi_target_info *targ_info)
+bmi_get_target_info(struct hif_device *device, struct bmi_target_info *targ_info)
{
int status;
u32 cid;
@@ -155,13 +158,13 @@ BMIGetTargetInfo(struct hif_device *device, struct bmi_target_info *targ_info)
AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Enter (device: 0x%p)\n", device));
cid = BMI_GET_TARGET_INFO;
- status = bmiBufferSend(device, (u8 *)&cid, sizeof(cid));
+ status = bmi_send_buf(device, (u8 *)&cid, sizeof(cid));
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
return A_ERROR;
}
- status = bmiBufferReceive(device, (u8 *)&targ_info->target_ver,
+ status = bmi_recv_buf(device, (u8 *)&targ_info->target_ver,
sizeof(targ_info->target_ver), true);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Version from the device\n"));
@@ -170,7 +173,7 @@ BMIGetTargetInfo(struct hif_device *device, struct bmi_target_info *targ_info)
if (targ_info->target_ver == TARGET_VERSION_SENTINAL) {
/* Determine how many bytes are in the Target's targ_info */
- status = bmiBufferReceive(device, (u8 *)&targ_info->target_info_byte_count,
+ status = bmi_recv_buf(device, (u8 *)&targ_info->target_info_byte_count,
sizeof(targ_info->target_info_byte_count), true);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info Byte Count from the device\n"));
@@ -184,7 +187,7 @@ BMIGetTargetInfo(struct hif_device *device, struct bmi_target_info *targ_info)
A_ASSERT(targ_info->target_info_byte_count == sizeof(*targ_info));
/* Read the remainder of the targ_info */
- status = bmiBufferReceive(device,
+ status = bmi_recv_buf(device,
((u8 *)targ_info)+sizeof(targ_info->target_info_byte_count),
sizeof(*targ_info)-sizeof(targ_info->target_info_byte_count), true);
if (status) {
@@ -201,7 +204,7 @@ BMIGetTargetInfo(struct hif_device *device, struct bmi_target_info *targ_info)
}
int
-BMIReadMemory(struct hif_device *device,
+bmi_read_memory(struct hif_device *device,
u32 address,
u8 *buffer,
u32 length)
@@ -238,12 +241,12 @@ BMIReadMemory(struct hif_device *device,
memcpy(&(pBMICmdBuf[offset]), &rxlen, sizeof(rxlen));
offset += sizeof(length);
- status = bmiBufferSend(device, pBMICmdBuf, offset);
+ status = bmi_send_buf(device, pBMICmdBuf, offset);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
return A_ERROR;
}
- status = bmiBufferReceive(device, pBMICmdBuf, rxlen, true);
+ status = bmi_recv_buf(device, pBMICmdBuf, rxlen, true);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
return A_ERROR;
@@ -257,7 +260,7 @@ BMIReadMemory(struct hif_device *device,
}
int
-BMIWriteMemory(struct hif_device *device,
+bmi_write_memory(struct hif_device *device,
u32 address,
u8 *buffer,
u32 length)
@@ -308,7 +311,7 @@ BMIWriteMemory(struct hif_device *device,
offset += sizeof(txlen);
memcpy(&(pBMICmdBuf[offset]), src, txlen);
offset += txlen;
- status = bmiBufferSend(device, pBMICmdBuf, offset);
+ status = bmi_send_buf(device, pBMICmdBuf, offset);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
return A_ERROR;
@@ -322,7 +325,7 @@ BMIWriteMemory(struct hif_device *device,
}
int
-BMIExecute(struct hif_device *device,
+bmi_execute(struct hif_device *device,
u32 address,
u32 *param)
{
@@ -351,13 +354,13 @@ BMIExecute(struct hif_device *device,
offset += sizeof(address);
memcpy(&(pBMICmdBuf[offset]), param, sizeof(*param));
offset += sizeof(*param);
- status = bmiBufferSend(device, pBMICmdBuf, offset);
+ status = bmi_send_buf(device, pBMICmdBuf, offset);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
return A_ERROR;
}
- status = bmiBufferReceive(device, pBMICmdBuf, sizeof(*param), false);
+ status = bmi_recv_buf(device, pBMICmdBuf, sizeof(*param), false);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
return A_ERROR;
@@ -370,7 +373,7 @@ BMIExecute(struct hif_device *device,
}
int
-BMISetAppStart(struct hif_device *device,
+bmi_set_app_start(struct hif_device *device,
u32 address)
{
u32 cid;
@@ -396,7 +399,7 @@ BMISetAppStart(struct hif_device *device,
offset += sizeof(cid);
memcpy(&(pBMICmdBuf[offset]), &address, sizeof(address));
offset += sizeof(address);
- status = bmiBufferSend(device, pBMICmdBuf, offset);
+ status = bmi_send_buf(device, pBMICmdBuf, offset);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
return A_ERROR;
@@ -407,7 +410,7 @@ BMISetAppStart(struct hif_device *device,
}
int
-BMIReadSOCRegister(struct hif_device *device,
+bmi_read_soc_register(struct hif_device *device,
u32 address,
u32 *param)
{
@@ -435,13 +438,13 @@ BMIReadSOCRegister(struct hif_device *device,
memcpy(&(pBMICmdBuf[offset]), &address, sizeof(address));
offset += sizeof(address);
- status = bmiBufferSend(device, pBMICmdBuf, offset);
+ status = bmi_send_buf(device, pBMICmdBuf, offset);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
return A_ERROR;
}
- status = bmiBufferReceive(device, pBMICmdBuf, sizeof(*param), true);
+ status = bmi_recv_buf(device, pBMICmdBuf, sizeof(*param), true);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
return A_ERROR;
@@ -453,7 +456,7 @@ BMIReadSOCRegister(struct hif_device *device,
}
int
-BMIWriteSOCRegister(struct hif_device *device,
+bmi_write_soc_register(struct hif_device *device,
u32 address,
u32 param)
{
@@ -482,7 +485,7 @@ BMIWriteSOCRegister(struct hif_device *device,
offset += sizeof(address);
memcpy(&(pBMICmdBuf[offset]), ¶m, sizeof(param));
offset += sizeof(param);
- status = bmiBufferSend(device, pBMICmdBuf, offset);
+ status = bmi_send_buf(device, pBMICmdBuf, offset);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
return A_ERROR;
@@ -493,7 +496,7 @@ BMIWriteSOCRegister(struct hif_device *device,
}
int
-BMIrompatchInstall(struct hif_device *device,
+bmi_rom_patch_install(struct hif_device *device,
u32 ROM_addr,
u32 RAM_addr,
u32 nbytes,
@@ -531,13 +534,13 @@ BMIrompatchInstall(struct hif_device *device,
offset += sizeof(nbytes);
memcpy(&(pBMICmdBuf[offset]), &do_activate, sizeof(do_activate));
offset += sizeof(do_activate);
- status = bmiBufferSend(device, pBMICmdBuf, offset);
+ status = bmi_send_buf(device, pBMICmdBuf, offset);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
return A_ERROR;
}
- status = bmiBufferReceive(device, pBMICmdBuf, sizeof(*rompatch_id), true);
+ status = bmi_recv_buf(device, pBMICmdBuf, sizeof(*rompatch_id), true);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
return A_ERROR;
@@ -549,7 +552,7 @@ BMIrompatchInstall(struct hif_device *device,
}
int
-BMIrompatchUninstall(struct hif_device *device,
+bmi_rom_patch_uninstall(struct hif_device *device,
u32 rompatch_id)
{
u32 cid;
@@ -575,7 +578,7 @@ BMIrompatchUninstall(struct hif_device *device,
offset += sizeof(cid);
memcpy(&(pBMICmdBuf[offset]), &rompatch_id, sizeof(rompatch_id));
offset += sizeof(rompatch_id);
- status = bmiBufferSend(device, pBMICmdBuf, offset);
+ status = bmi_send_buf(device, pBMICmdBuf, offset);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
return A_ERROR;
@@ -618,7 +621,7 @@ _BMIrompatchChangeActivation(struct hif_device *device,
length = rompatch_count * sizeof(*rompatch_list);
memcpy(&(pBMICmdBuf[offset]), rompatch_list, length);
offset += length;
- status = bmiBufferSend(device, pBMICmdBuf, offset);
+ status = bmi_send_buf(device, pBMICmdBuf, offset);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
return A_ERROR;
@@ -630,7 +633,7 @@ _BMIrompatchChangeActivation(struct hif_device *device,
}
int
-BMIrompatchActivate(struct hif_device *device,
+bmi_rom_patch_activate(struct hif_device *device,
u32 rompatch_count,
u32 *rompatch_list)
{
@@ -638,7 +641,7 @@ BMIrompatchActivate(struct hif_device *device,
}
int
-BMIrompatchDeactivate(struct hif_device *device,
+bmi_rom_patch_deactivate(struct hif_device *device,
u32 rompatch_count,
u32 *rompatch_list)
{
@@ -646,7 +649,7 @@ BMIrompatchDeactivate(struct hif_device *device,
}
int
-BMILZData(struct hif_device *device,
+bmi_lz_data(struct hif_device *device,
u8 *buffer,
u32 length)
{
@@ -682,7 +685,7 @@ BMILZData(struct hif_device *device,
offset += sizeof(txlen);
memcpy(&(pBMICmdBuf[offset]), &buffer[length - remaining], txlen);
offset += txlen;
- status = bmiBufferSend(device, pBMICmdBuf, offset);
+ status = bmi_send_buf(device, pBMICmdBuf, offset);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
return A_ERROR;
@@ -696,7 +699,7 @@ BMILZData(struct hif_device *device,
}
int
-BMILZStreamStart(struct hif_device *device,
+bmi_lz_stream_start(struct hif_device *device,
u32 address)
{
u32 cid;
@@ -721,7 +724,7 @@ BMILZStreamStart(struct hif_device *device,
offset += sizeof(cid);
memcpy(&(pBMICmdBuf[offset]), &address, sizeof(address));
offset += sizeof(address);
- status = bmiBufferSend(device, pBMICmdBuf, offset);
+ status = bmi_send_buf(device, pBMICmdBuf, offset);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to Start LZ Stream to the device\n"));
return A_ERROR;
@@ -734,7 +737,7 @@ BMILZStreamStart(struct hif_device *device,
/* BMI Access routines */
int
-bmiBufferSend(struct hif_device *device,
+bmi_send_buf(struct hif_device *device,
u8 *buffer,
u32 length)
{
@@ -774,7 +777,7 @@ bmiBufferSend(struct hif_device *device,
return A_ERROR;
}
} else {
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout - bmiBufferSend\n"));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout - bmi_send_buf\n"));
return A_ERROR;
}
@@ -782,7 +785,7 @@ bmiBufferSend(struct hif_device *device,
}
int
-bmiBufferReceive(struct hif_device *device,
+bmi_recv_buf(struct hif_device *device,
u8 *buffer,
u32 length,
bool want_timeout)
@@ -890,7 +893,7 @@ bmiBufferReceive(struct hif_device *device,
}
if (!word_available) {
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout - bmiBufferReceive FIFO empty\n"));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout - bmi_recv_buf FIFO empty\n"));
return A_ERROR;
}
}
@@ -941,7 +944,7 @@ bmiBufferReceive(struct hif_device *device,
}
if (!(*pBMICmdCredits)) {
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout- bmiBufferReceive no credit\n"));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout- bmi_recv_buf no credit\n"));
return A_ERROR;
}
}
@@ -958,14 +961,14 @@ bmiBufferReceive(struct hif_device *device,
}
int
-BMIFastDownload(struct hif_device *device, u32 address, u8 *buffer, u32 length)
+bmi_fast_download(struct hif_device *device, u32 address, u8 *buffer, u32 length)
{
int status = A_ERROR;
u32 lastWord = 0;
u32 lastWordOffset = length & ~0x3;
u32 unalignedBytes = length & 0x3;
- status = BMILZStreamStart (device, address);
+ status = bmi_lz_stream_start (device, address);
if (status) {
return A_ERROR;
}
@@ -975,21 +978,21 @@ BMIFastDownload(struct hif_device *device, u32 address, u8 *buffer, u32 length)
memcpy(&lastWord, &buffer[lastWordOffset], unalignedBytes);
}
- status = BMILZData(device, buffer, lastWordOffset);
+ status = bmi_lz_data(device, buffer, lastWordOffset);
if (status) {
return A_ERROR;
}
if (unalignedBytes) {
- status = BMILZData(device, (u8 *)&lastWord, 4);
+ status = bmi_lz_data(device, (u8 *)&lastWord, 4);
}
if (!status) {
//
// Close compressed stream and open a new (fake) one. This serves mainly to flush Target caches.
//
- status = BMILZStreamStart (device, 0x00);
+ status = bmi_lz_stream_start (device, 0x00);
if (status) {
return A_ERROR;
}
@@ -998,13 +1001,13 @@ BMIFastDownload(struct hif_device *device, u32 address, u8 *buffer, u32 length)
}
int
-BMIRawWrite(struct hif_device *device, u8 *buffer, u32 length)
+bmi_raw_write(struct hif_device *device, u8 *buffer, u32 length)
{
- return bmiBufferSend(device, buffer, length);
+ return bmi_send_buf(device, buffer, length);
}
int
-BMIRawRead(struct hif_device *device, u8 *buffer, u32 length, bool want_timeout)
+bmi_raw_read(struct hif_device *device, u8 *buffer, u32 length, bool want_timeout)
{
- return bmiBufferReceive(device, buffer, length, want_timeout);
+ return bmi_recv_buf(device, buffer, length, want_timeout);
}
diff --git a/drivers/staging/ath6kl/htc2/htc_internal.h b/drivers/staging/ath6kl/htc2/htc_internal.h
index cac9735..bab8cda 100644
--- a/drivers/staging/ath6kl/htc2/htc_internal.h
+++ b/drivers/staging/ath6kl/htc2/htc_internal.h
@@ -38,10 +38,9 @@ extern "C" {
#include "athdefs.h"
#include "a_osapi.h"
#include "htc_debug.h"
+#include "bmi.h"
#include "htc.h"
#include "htc_api.h"
-#include "bmi_msg.h"
-#include "hif.h"
#include "AR6000/ar6k.h"
/* HTC operational parameters */
diff --git a/drivers/staging/ath6kl/include/bmi.h b/drivers/staging/ath6kl/include/bmi.h
deleted file mode 100644
index d3227f7..0000000
--- a/drivers/staging/ath6kl/include/bmi.h
+++ /dev/null
@@ -1,134 +0,0 @@
-//------------------------------------------------------------------------------
-// <copyright file="bmi.h" company="Atheros">
-// Copyright (c) 2004-2010 Atheros Corporation. All rights reserved.
-//
-//
-// Permission to use, copy, modify, and/or distribute this software for any
-// purpose with or without fee is hereby granted, provided that the above
-// copyright notice and this permission notice appear in all copies.
-//
-// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-//
-//
-//------------------------------------------------------------------------------
-//==============================================================================
-// BMI declarations and prototypes
-//
-// Author(s): ="Atheros"
-//==============================================================================
-#ifndef _BMI_H_
-#define _BMI_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-/* Header files */
-#include "a_config.h"
-#include "athdefs.h"
-#include "hif.h"
-#include "a_osapi.h"
-#include "bmi_msg.h"
-
-void
-BMIInit(void);
-
-void
-BMICleanup(void);
-
-int
-BMIDone(struct hif_device *device);
-
-int
-BMIGetTargetInfo(struct hif_device *device, struct bmi_target_info *targ_info);
-
-int
-BMIReadMemory(struct hif_device *device,
- u32 address,
- u8 *buffer,
- u32 length);
-
-int
-BMIWriteMemory(struct hif_device *device,
- u32 address,
- u8 *buffer,
- u32 length);
-
-int
-BMIExecute(struct hif_device *device,
- u32 address,
- u32 *param);
-
-int
-BMISetAppStart(struct hif_device *device,
- u32 address);
-
-int
-BMIReadSOCRegister(struct hif_device *device,
- u32 address,
- u32 *param);
-
-int
-BMIWriteSOCRegister(struct hif_device *device,
- u32 address,
- u32 param);
-
-int
-BMIrompatchInstall(struct hif_device *device,
- u32 ROM_addr,
- u32 RAM_addr,
- u32 nbytes,
- u32 do_activate,
- u32 *patch_id);
-
-int
-BMIrompatchUninstall(struct hif_device *device,
- u32 rompatch_id);
-
-int
-BMIrompatchActivate(struct hif_device *device,
- u32 rompatch_count,
- u32 *rompatch_list);
-
-int
-BMIrompatchDeactivate(struct hif_device *device,
- u32 rompatch_count,
- u32 *rompatch_list);
-
-int
-BMILZStreamStart(struct hif_device *device,
- u32 address);
-
-int
-BMILZData(struct hif_device *device,
- u8 *buffer,
- u32 length);
-
-int
-BMIFastDownload(struct hif_device *device,
- u32 address,
- u8 *buffer,
- u32 length);
-
-int
-BMIRawWrite(struct hif_device *device,
- u8 *buffer,
- u32 length);
-
-int
-BMIRawRead(struct hif_device *device,
- u8 *buffer,
- u32 length,
- bool want_timeout);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _BMI_H_ */
diff --git a/drivers/staging/ath6kl/include/common/bmi_msg.h b/drivers/staging/ath6kl/include/common/bmi_msg.h
deleted file mode 100644
index 84e8db5..0000000
--- a/drivers/staging/ath6kl/include/common/bmi_msg.h
+++ /dev/null
@@ -1,233 +0,0 @@
-//------------------------------------------------------------------------------
-// Copyright (c) 2004-2010 Atheros Corporation. All rights reserved.
-//
-//
-// Permission to use, copy, modify, and/or distribute this software for any
-// purpose with or without fee is hereby granted, provided that the above
-// copyright notice and this permission notice appear in all copies.
-//
-// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-//
-//
-//
-// Author(s): ="Atheros"
-//------------------------------------------------------------------------------
-
-#ifndef __BMI_MSG_H__
-#define __BMI_MSG_H__
-
-/*
- * Bootloader Messaging Interface (BMI)
- *
- * BMI is a very simple messaging interface used during initialization
- * to read memory, write memory, execute code, and to define an
- * application entry PC.
- *
- * It is used to download an application to AR6K, to provide
- * patches to code that is already resident on AR6K, and generally
- * to examine and modify state. The Host has an opportunity to use
- * BMI only once during bootup. Once the Host issues a BMI_DONE
- * command, this opportunity ends.
- *
- * The Host writes BMI requests to mailbox0, and reads BMI responses
- * from mailbox0. BMI requests all begin with a command
- * (see below for specific commands), and are followed by
- * command-specific data.
- *
- * Flow control:
- * The Host can only issue a command once the Target gives it a
- * "BMI Command Credit", using AR6K Counter #4. As soon as the
- * Target has completed a command, it issues another BMI Command
- * Credit (so the Host can issue the next command).
- *
- * BMI handles all required Target-side cache flushing.
- */
-
-
-/* Maximum data size used for BMI transfers */
-#define BMI_DATASZ_MAX 256
-
-/* BMI Commands */
-
-#define BMI_NO_COMMAND 0
-
-#define BMI_DONE 1
- /*
- * Semantics: Host is done using BMI
- * Request format:
- * u32 command (BMI_DONE)
- * Response format: none
- */
-
-#define BMI_READ_MEMORY 2
- /*
- * Semantics: Host reads AR6K memory
- * Request format:
- * u32 command (BMI_READ_MEMORY)
- * u32 address
- * u32 length, at most BMI_DATASZ_MAX
- * Response format:
- * u8 data[length]
- */
-
-#define BMI_WRITE_MEMORY 3
- /*
- * Semantics: Host writes AR6K memory
- * Request format:
- * u32 command (BMI_WRITE_MEMORY)
- * u32 address
- * u32 length, at most BMI_DATASZ_MAX
- * u8 data[length]
- * Response format: none
- */
-
-#define BMI_EXECUTE 4
- /*
- * Semantics: Causes AR6K to execute code
- * Request format:
- * u32 command (BMI_EXECUTE)
- * u32 address
- * u32 parameter
- * Response format:
- * u32 return value
- */
-
-#define BMI_SET_APP_START 5
- /*
- * Semantics: Set Target application starting address
- * Request format:
- * u32 command (BMI_SET_APP_START)
- * u32 address
- * Response format: none
- */
-
-#define BMI_READ_SOC_REGISTER 6
- /*
- * Semantics: Read a 32-bit Target SOC register.
- * Request format:
- * u32 command (BMI_READ_REGISTER)
- * u32 address
- * Response format:
- * u32 value
- */
-
-#define BMI_WRITE_SOC_REGISTER 7
- /*
- * Semantics: Write a 32-bit Target SOC register.
- * Request format:
- * u32 command (BMI_WRITE_REGISTER)
- * u32 address
- * u32 value
- *
- * Response format: none
- */
-
-#define BMI_GET_TARGET_ID 8
-#define BMI_GET_TARGET_INFO 8
- /*
- * Semantics: Fetch the 4-byte Target information
- * Request format:
- * u32 command (BMI_GET_TARGET_ID/INFO)
- * Response format1 (old firmware):
- * u32 TargetVersionID
- * Response format2 (newer firmware):
- * u32 TARGET_VERSION_SENTINAL
- * struct bmi_target_info;
- */
-
-PREPACK struct bmi_target_info {
- u32 target_info_byte_count; /* size of this structure */
- u32 target_ver; /* Target Version ID */
- u32 target_type; /* Target type */
-} POSTPACK;
-#define TARGET_VERSION_SENTINAL 0xffffffff
-#define TARGET_TYPE_AR6001 1
-#define TARGET_TYPE_AR6002 2
-#define TARGET_TYPE_AR6003 3
-
-
-#define BMI_ROMPATCH_INSTALL 9
- /*
- * Semantics: Install a ROM Patch.
- * Request format:
- * u32 command (BMI_ROMPATCH_INSTALL)
- * u32 Target ROM Address
- * u32 Target RAM Address or Value (depending on Target Type)
- * u32 Size, in bytes
- * u32 Activate? 1-->activate;
- * 0-->install but do not activate
- * Response format:
- * u32 PatchID
- */
-
-#define BMI_ROMPATCH_UNINSTALL 10
- /*
- * Semantics: Uninstall a previously-installed ROM Patch,
- * automatically deactivating, if necessary.
- * Request format:
- * u32 command (BMI_ROMPATCH_UNINSTALL)
- * u32 PatchID
- *
- * Response format: none
- */
-
-#define BMI_ROMPATCH_ACTIVATE 11
- /*
- * Semantics: Activate a list of previously-installed ROM Patches.
- * Request format:
- * u32 command (BMI_ROMPATCH_ACTIVATE)
- * u32 rompatch_count
- * u32 PatchID[rompatch_count]
- *
- * Response format: none
- */
-
-#define BMI_ROMPATCH_DEACTIVATE 12
- /*
- * Semantics: Deactivate a list of active ROM Patches.
- * Request format:
- * u32 command (BMI_ROMPATCH_DEACTIVATE)
- * u32 rompatch_count
- * u32 PatchID[rompatch_count]
- *
- * Response format: none
- */
-
-
-#define BMI_LZ_STREAM_START 13
- /*
- * Semantics: Begin an LZ-compressed stream of input
- * which is to be uncompressed by the Target to an
- * output buffer at address. The output buffer must
- * be sufficiently large to hold the uncompressed
- * output from the compressed input stream. This BMI
- * command should be followed by a series of 1 or more
- * BMI_LZ_DATA commands.
- * u32 command (BMI_LZ_STREAM_START)
- * u32 address
- * Note: Not supported on all versions of ROM firmware.
- */
-
-#define BMI_LZ_DATA 14
- /*
- * Semantics: Host writes AR6K memory with LZ-compressed
- * data which is uncompressed by the Target. This command
- * must be preceded by a BMI_LZ_STREAM_START command. A series
- * of BMI_LZ_DATA commands are considered part of a single
- * input stream until another BMI_LZ_STREAM_START is issued.
- * Request format:
- * u32 command (BMI_LZ_DATA)
- * u32 length (of compressed data),
- * at most BMI_DATASZ_MAX
- * u8 CompressedData[length]
- * Response format: none
- * Note: Not supported on all versions of ROM firmware.
- */
-
-#endif /* __BMI_MSG_H__ */
diff --git a/drivers/staging/ath6kl/miscdrv/common_drv.c b/drivers/staging/ath6kl/miscdrv/common_drv.c
index 1ce539a..b80e532 100644
--- a/drivers/staging/ath6kl/miscdrv/common_drv.c
+++ b/drivers/staging/ath6kl/miscdrv/common_drv.c
@@ -32,11 +32,9 @@
#include "a_osapi.h"
#include "targaddrs.h"
-#include "hif.h"
+#include "bmi.h"
#include "htc_api.h"
#include "wmi.h"
-#include "bmi.h"
-#include "bmi_msg.h"
#include "common_drv.h"
#define ATH_MODULE_NAME misc
#include "a_debug.h"
@@ -484,12 +482,12 @@ ar6000_copy_cust_data_from_target(struct hif_device *hifDevice, u32 TargetType)
u8 AR6003CustDataShadow[AR6003_CUST_DATA_SIZE+4];
s32 i;
- if (BMIReadMemory(hifDevice,
+ if (bmi_read_memory(hifDevice,
HOST_INTEREST_ITEM_ADDRESS(TargetType, hi_board_data),
(u8 *)&eepHeaderAddr,
4)!= 0)
{
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMIReadMemory for reading board data address failed \n"));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("bmi_read_memory for reading board data address failed \n"));
return;
}
@@ -497,8 +495,8 @@ ar6000_copy_cust_data_from_target(struct hif_device *hifDevice, u32 TargetType)
eepHeaderAddr += 36; /* AR6003 customer data section offset is 37 */
for (i=0; i<AR6003_CUST_DATA_SIZE+4; i+=4){
- if (BMIReadSOCRegister(hifDevice, eepHeaderAddr, (u32 *)&AR6003CustDataShadow[i])!= 0) {
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMIReadSOCRegister () failed \n"));
+ if (bmi_read_soc_register(hifDevice, eepHeaderAddr, (u32 *)&AR6003CustDataShadow[i])!= 0) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("bmi_read_soc_register () failed \n"));
return ;
}
eepHeaderAddr +=4;
@@ -511,8 +509,8 @@ ar6000_copy_cust_data_from_target(struct hif_device *hifDevice, u32 TargetType)
eepHeaderAddr += 64; /* AR6002 customer data sectioin offset is 64 */
for (i=0; i<AR6002_CUST_DATA_SIZE; i+=4){
- if (BMIReadSOCRegister(hifDevice, eepHeaderAddr, (u32 *)&custDataAR6002[i])!= 0) {
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMIReadSOCRegister () failed \n"));
+ if (bmi_read_soc_register(hifDevice, eepHeaderAddr, (u32 *)&custDataAR6002[i])!= 0) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("bmi_read_soc_register () failed \n"));
return ;
}
eepHeaderAddr +=4;
@@ -649,13 +647,13 @@ int ar6000_set_htc_params(struct hif_device *hifDevice,
}
/* set the host interest area for the block size */
- status = BMIWriteMemory(hifDevice,
+ status = bmi_write_memory(hifDevice,
HOST_INTEREST_ITEM_ADDRESS(TargetType, hi_mbox_io_block_sz),
(u8 *)&blocksizes[1],
4);
if (status) {
- AR_DEBUG_PRINTF(ATH_LOG_ERR,("BMIWriteMemory for IO block size failed \n"));
+ AR_DEBUG_PRINTF(ATH_LOG_ERR,("bmi_write_memory for IO block size failed \n"));
break;
}
@@ -664,13 +662,13 @@ int ar6000_set_htc_params(struct hif_device *hifDevice,
if (MboxIsrYieldValue != 0) {
/* set the host interest area for the mbox ISR yield limit */
- status = BMIWriteMemory(hifDevice,
+ status = bmi_write_memory(hifDevice,
HOST_INTEREST_ITEM_ADDRESS(TargetType, hi_mbox_isr_yield_limit),
(u8 *)&MboxIsrYieldValue,
4);
if (status) {
- AR_DEBUG_PRINTF(ATH_LOG_ERR,("BMIWriteMemory for yield limit failed \n"));
+ AR_DEBUG_PRINTF(ATH_LOG_ERR,("bmi_write_memory for yield limit failed \n"));
break;
}
}
@@ -897,7 +895,7 @@ int ar6000_set_hci_bridge_flags(struct hif_device *hifDevice,
}
/* set hci bridge flags */
- status = BMIWriteMemory(hifDevice,
+ status = bmi_write_memory(hifDevice,
HOST_INTEREST_ITEM_ADDRESS(TargetType, hi_hci_bridge_flags),
(u8 *)&Flags,
4);
diff --git a/drivers/staging/ath6kl/os/linux/ar6000_drv.c b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
index aece57a..755a347 100644
--- a/drivers/staging/ath6kl/os/linux/ar6000_drv.c
+++ b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
@@ -765,7 +765,7 @@ ar6000_sysfs_bmi_read(struct file *fp, struct kobject *kobj,
if (index == MAX_AR6000) return 0;
- if ((BMIRawRead(ar->arHifDevice, (u8*)buf, count, true)) != 0) {
+ if ((bmi_raw_read(ar->arHifDevice, (u8*)buf, count, true)) != 0) {
return 0;
}
@@ -792,7 +792,7 @@ ar6000_sysfs_bmi_write(struct file *fp, struct kobject *kobj,
if (index == MAX_AR6000) return 0;
- if ((BMIRawWrite(ar->arHifDevice, (u8*)buf, count)) != 0) {
+ if ((bmi_raw_write(ar->arHifDevice, (u8*)buf, count)) != 0) {
return 0;
}
@@ -1076,14 +1076,14 @@ ar6000_transfer_bin_file(struct ar6_softc *ar, AR6K_BIN_FILE file, u32 address,
(((ar)->arTargetType == TARGET_TYPE_AR6003) ? AR6003_BOARD_DATA_SZ : 0));
/* Determine where in Target RAM to write Board Data */
- bmifn(BMIReadMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_ext_data), (u8 *)&board_ext_address, 4));
+ bmifn(bmi_read_memory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_ext_data), (u8 *)&board_ext_address, 4));
AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("Board extended Data download address: 0x%x\n", board_ext_address));
/* check whether the target has allocated memory for extended board data and file contains extended board data */
if ((board_ext_address) && (fw_entry->size == (board_data_size + board_ext_data_size))) {
u32 param;
- status = BMIWriteMemory(ar->arHifDevice, board_ext_address, (u8 *)(fw_entry->data + board_data_size), board_ext_data_size);
+ status = bmi_write_memory(ar->arHifDevice, board_ext_address, (u8 *)(fw_entry->data + board_data_size), board_ext_data_size);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__));
@@ -1093,7 +1093,7 @@ ar6000_transfer_bin_file(struct ar6_softc *ar, AR6K_BIN_FILE file, u32 address,
/* Record the fact that extended board Data IS initialized */
param = (board_ext_data_size << 16) | 1;
- bmifn(BMIWriteMemory(ar->arHifDevice,
+ bmifn(bmi_write_memory(ar->arHifDevice,
HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_ext_data_config),
(unsigned char *)¶m, 4));
}
@@ -1101,9 +1101,9 @@ ar6000_transfer_bin_file(struct ar6_softc *ar, AR6K_BIN_FILE file, u32 address,
}
if (compressed) {
- status = BMIFastDownload(ar->arHifDevice, address, (u8 *)fw_entry->data, fw_entry_size);
+ status = bmi_fast_download(ar->arHifDevice, address, (u8 *)fw_entry->data, fw_entry_size);
} else {
- status = BMIWriteMemory(ar->arHifDevice, address, (u8 *)fw_entry->data, fw_entry_size);
+ status = bmi_write_memory(ar->arHifDevice, address, (u8 *)fw_entry->data, fw_entry_size);
}
if (status) {
@@ -1122,16 +1122,16 @@ ar6000_update_bdaddr(struct ar6_softc *ar)
if (setupbtdev != 0) {
u32 address;
- if (BMIReadMemory(ar->arHifDevice,
+ if (bmi_read_memory(ar->arHifDevice,
HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data), (u8 *)&address, 4) != 0)
{
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for hi_board_data failed\n"));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("bmi_read_memory for hi_board_data failed\n"));
return A_ERROR;
}
- if (BMIReadMemory(ar->arHifDevice, address + BDATA_BDADDR_OFFSET, (u8 *)ar->bdaddr, 6) != 0)
+ if (bmi_read_memory(ar->arHifDevice, address + BDATA_BDADDR_OFFSET, (u8 *)ar->bdaddr, 6) != 0)
{
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for BD address failed\n"));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("bmi_read_memory for BD address failed\n"));
return A_ERROR;
}
AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BDADDR 0x%x:0x%x:0x%x:0x%x:0x%x:0x%x\n", ar->bdaddr[0],
@@ -1167,21 +1167,21 @@ ar6000_sysfs_bmi_get_config(struct ar6_softc *ar, u32 mode)
/* Temporarily disable system sleep */
address = MBOX_BASE_ADDRESS + LOCAL_SCRATCH_ADDRESS;
- bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m));
+ bmifn(bmi_read_soc_register(ar->arHifDevice, address, ¶m));
options = param;
param |= AR6K_OPTION_SLEEP_DISABLE;
- bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
+ bmifn(bmi_write_soc_register(ar->arHifDevice, address, param));
address = RTC_BASE_ADDRESS + SYSTEM_SLEEP_ADDRESS;
- bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m));
+ bmifn(bmi_read_soc_register(ar->arHifDevice, address, ¶m));
sleep = param;
param |= WLAN_SYSTEM_SLEEP_DISABLE_SET(1);
- bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
+ bmifn(bmi_write_soc_register(ar->arHifDevice, address, param));
AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("old options: %d, old sleep: %d\n", options, sleep));
if (ar->arTargetType == TARGET_TYPE_AR6003) {
/* Program analog PLL register */
- bmifn(BMIWriteSOCRegister(ar->arHifDevice, ANALOG_INTF_BASE_ADDRESS + 0x284, 0xF9104001));
+ bmifn(bmi_write_soc_register(ar->arHifDevice, ANALOG_INTF_BASE_ADDRESS + 0x284, 0xF9104001));
/* Run at 80/88MHz by default */
param = CPU_CLOCK_STANDARD_SET(1);
} else {
@@ -1189,18 +1189,18 @@ ar6000_sysfs_bmi_get_config(struct ar6_softc *ar, u32 mode)
param = CPU_CLOCK_STANDARD_SET(0);
}
address = RTC_BASE_ADDRESS + CPU_CLOCK_ADDRESS;
- bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
+ bmifn(bmi_write_soc_register(ar->arHifDevice, address, param));
param = 0;
if (ar->arTargetType == TARGET_TYPE_AR6002) {
- bmifn(BMIReadMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_ext_clk_detected), (u8 *)¶m, 4));
+ bmifn(bmi_read_memory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_ext_clk_detected), (u8 *)¶m, 4));
}
/* LPO_CAL.ENABLE = 1 if no external clk is detected */
if (param != 1) {
address = RTC_BASE_ADDRESS + LPO_CAL_ADDRESS;
param = LPO_CAL_ENABLE_SET(1);
- bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
+ bmifn(bmi_write_soc_register(ar->arHifDevice, address, param));
}
/* Venus2.0: Lower SDIO pad drive strength,
@@ -1209,16 +1209,16 @@ ar6000_sysfs_bmi_get_config(struct ar6_softc *ar, u32 mode)
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("AR6K: Temporary WAR to avoid SDIO CRC error\n"));
param = 0x20;
address = GPIO_BASE_ADDRESS + GPIO_PIN10_ADDRESS;
- bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
+ bmifn(bmi_write_soc_register(ar->arHifDevice, address, param));
address = GPIO_BASE_ADDRESS + GPIO_PIN11_ADDRESS;
- bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
+ bmifn(bmi_write_soc_register(ar->arHifDevice, address, param));
address = GPIO_BASE_ADDRESS + GPIO_PIN12_ADDRESS;
- bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
+ bmifn(bmi_write_soc_register(ar->arHifDevice, address, param));
address = GPIO_BASE_ADDRESS + GPIO_PIN13_ADDRESS;
- bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
+ bmifn(bmi_write_soc_register(ar->arHifDevice, address, param));
}
#ifdef FORCE_INTERNAL_CLOCK
@@ -1226,20 +1226,20 @@ ar6000_sysfs_bmi_get_config(struct ar6_softc *ar, u32 mode)
if (ar->arTargetType == TARGET_TYPE_AR6003) {
/* hi_ext_clk_detected = 0 */
param = 0;
- bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_ext_clk_detected), (u8 *)¶m, 4));
+ bmifn(bmi_write_memory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_ext_clk_detected), (u8 *)¶m, 4));
/* CLOCK_CONTROL &= ~LF_CLK32 */
address = RTC_BASE_ADDRESS + CLOCK_CONTROL_ADDRESS;
- bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m));
+ bmifn(bmi_read_soc_register(ar->arHifDevice, address, ¶m));
param &= (~CLOCK_CONTROL_LF_CLK32_SET(1));
- bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
+ bmifn(bmi_write_soc_register(ar->arHifDevice, address, param));
}
#endif /* FORCE_INTERNAL_CLOCK */
/* Transfer Board Data from Target EEPROM to Target RAM */
if (ar->arTargetType == TARGET_TYPE_AR6003) {
/* Determine where in Target RAM to write Board Data */
- bmifn(BMIReadMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data), (u8 *)&address, 4));
+ bmifn(bmi_read_memory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data), (u8 *)&address, 4));
AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("Board Data download address: 0x%x\n", address));
/* Write EEPROM data to Target RAM */
@@ -1249,7 +1249,7 @@ ar6000_sysfs_bmi_get_config(struct ar6_softc *ar, u32 mode)
/* Record the fact that Board Data IS initialized */
param = 1;
- bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data_initialized), (u8 *)¶m, 4));
+ bmifn(bmi_write_memory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data_initialized), (u8 *)¶m, 4));
/* Transfer One time Programmable data */
AR6K_APP_LOAD_ADDRESS(address, ar->arVersion.target_ver);
@@ -1260,7 +1260,7 @@ ar6000_sysfs_bmi_get_config(struct ar6_softc *ar, u32 mode)
/* Execute the OTP code */
param = 0;
AR6K_APP_START_OVERRIDE_ADDRESS(address, ar->arVersion.target_ver);
- bmifn(BMIExecute(ar->arHifDevice, address, ¶m));
+ bmifn(bmi_execute(ar->arHifDevice, address, ¶m));
} else if (status != A_ENOENT) {
return A_ERROR;
}
@@ -1279,7 +1279,7 @@ ar6000_sysfs_bmi_get_config(struct ar6_softc *ar, u32 mode)
/* Set starting address for firmware */
AR6K_APP_START_OVERRIDE_ADDRESS(address, ar->arVersion.target_ver);
- bmifn(BMISetAppStart(ar->arHifDevice, address));
+ bmifn(bmi_set_app_start(ar->arHifDevice, address));
if(ar->arTargetType == TARGET_TYPE_AR6003) {
AR6K_DATASET_PATCH_ADDRESS(address, ar->arVersion.target_ver);
@@ -1287,18 +1287,18 @@ ar6000_sysfs_bmi_get_config(struct ar6_softc *ar, u32 mode)
address, false)) != 0)
return A_ERROR;
param = address;
- bmifn(BMIWriteMemory(ar->arHifDevice,
+ bmifn(bmi_write_memory(ar->arHifDevice,
HOST_INTEREST_ITEM_ADDRESS(ar, hi_dset_list_head),
(unsigned char *)¶m, 4));
}
/* Restore system sleep */
address = RTC_BASE_ADDRESS + SYSTEM_SLEEP_ADDRESS;
- bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, sleep));
+ bmifn(bmi_write_soc_register(ar->arHifDevice, address, sleep));
address = MBOX_BASE_ADDRESS + LOCAL_SCRATCH_ADDRESS;
param = options | 0x20;
- bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
+ bmifn(bmi_write_soc_register(ar->arHifDevice, address, param));
if (ar->arTargetType == TARGET_TYPE_AR6003) {
/* Configure GPIO AR6003 UART */
@@ -1306,14 +1306,14 @@ ar6000_sysfs_bmi_get_config(struct ar6_softc *ar, u32 mode)
#define CONFIG_AR600x_DEBUG_UART_TX_PIN 8
#endif
param = CONFIG_AR600x_DEBUG_UART_TX_PIN;
- bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbg_uart_txpin), (u8 *)¶m, 4));
+ bmifn(bmi_write_memory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbg_uart_txpin), (u8 *)¶m, 4));
#if (CONFIG_AR600x_DEBUG_UART_TX_PIN == 23)
{
address = GPIO_BASE_ADDRESS + CLOCK_GPIO_ADDRESS;
- bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m));
+ bmifn(bmi_read_soc_register(ar->arHifDevice, address, ¶m));
param |= CLOCK_GPIO_BT_CLK_OUT_EN_SET(1);
- bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
+ bmifn(bmi_write_soc_register(ar->arHifDevice, address, param));
}
#endif
@@ -1321,7 +1321,7 @@ ar6000_sysfs_bmi_get_config(struct ar6_softc *ar, u32 mode)
#ifdef ATH6KL_CONFIG_GPIO_BT_RESET
#define CONFIG_AR600x_BT_RESET_PIN 0x16
param = CONFIG_AR600x_BT_RESET_PIN;
- bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_hci_uart_support_pins), (u8 *)¶m, 4));
+ bmifn(bmi_write_memory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_hci_uart_support_pins), (u8 *)¶m, 4));
#endif /* ATH6KL_CONFIG_GPIO_BT_RESET */
/* Configure UART flow control polarity */
@@ -1332,14 +1332,14 @@ ar6000_sysfs_bmi_get_config(struct ar6_softc *ar, u32 mode)
#if (CONFIG_ATH6KL_BT_UART_FC_POLARITY == 1)
if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
param = ((CONFIG_ATH6KL_BT_UART_FC_POLARITY << 1) & 0x2);
- bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_hci_uart_pwr_mgmt_params), (u8 *)¶m, 4));
+ bmifn(bmi_write_memory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_hci_uart_pwr_mgmt_params), (u8 *)¶m, 4));
}
#endif /* CONFIG_ATH6KL_BT_UART_FC_POLARITY */
}
#ifdef HTC_RAW_INTERFACE
if (!eppingtest && bypasswmi) {
- /* Don't run BMIDone for ART mode and force resetok=0 */
+ /* Don't run bmi_done for ART mode and force resetok=0 */
resetok = 0;
msleep(1000);
}
@@ -1355,12 +1355,12 @@ ar6000_configure_target(struct ar6_softc *ar)
u32 param;
if (enableuartprint) {
param = 1;
- if (BMIWriteMemory(ar->arHifDevice,
+ if (bmi_write_memory(ar->arHifDevice,
HOST_INTEREST_ITEM_ADDRESS(ar, hi_serial_enable),
(u8 *)¶m,
4)!= 0)
{
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for enableuartprint failed \n"));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("bmi_write_memory for enableuartprint failed \n"));
return A_ERROR;
}
AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Serial console prints enabled\n"));
@@ -1368,12 +1368,12 @@ ar6000_configure_target(struct ar6_softc *ar)
/* Tell target which HTC version it is used*/
param = HTC_PROTOCOL_VERSION;
- if (BMIWriteMemory(ar->arHifDevice,
+ if (bmi_write_memory(ar->arHifDevice,
HOST_INTEREST_ITEM_ADDRESS(ar, hi_app_host_interest),
(u8 *)¶m,
4)!= 0)
{
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for htc version failed \n"));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("bmi_write_memory for htc version failed \n"));
return A_ERROR;
}
@@ -1387,23 +1387,23 @@ ar6000_configure_target(struct ar6_softc *ar)
if (enabletimerwar) {
u32 param;
- if (BMIReadMemory(ar->arHifDevice,
+ if (bmi_read_memory(ar->arHifDevice,
HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
(u8 *)¶m,
4)!= 0)
{
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for enabletimerwar failed \n"));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("bmi_read_memory for enabletimerwar failed \n"));
return A_ERROR;
}
param |= HI_OPTION_TIMER_WAR;
- if (BMIWriteMemory(ar->arHifDevice,
+ if (bmi_write_memory(ar->arHifDevice,
HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
(u8 *)¶m,
4) != 0)
{
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for enabletimerwar failed \n"));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("bmi_write_memory for enabletimerwar failed \n"));
return A_ERROR;
}
AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Timer WAR enabled\n"));
@@ -1413,12 +1413,12 @@ ar6000_configure_target(struct ar6_softc *ar)
{
u32 param;
- if (BMIReadMemory(ar->arHifDevice,
+ if (bmi_read_memory(ar->arHifDevice,
HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
(u8 *)¶m,
4)!= 0)
{
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for setting fwmode failed \n"));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("bmi_read_memory for setting fwmode failed \n"));
return A_ERROR;
}
@@ -1428,12 +1428,12 @@ ar6000_configure_target(struct ar6_softc *ar)
param |= (firmware_bridge << HI_OPTION_FW_BRIDGE_SHIFT);
- if (BMIWriteMemory(ar->arHifDevice,
+ if (bmi_write_memory(ar->arHifDevice,
HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
(u8 *)¶m,
4) != 0)
{
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for setting fwmode failed \n"));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("bmi_write_memory for setting fwmode failed \n"));
return A_ERROR;
}
AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Firmware mode set\n"));
@@ -1443,23 +1443,23 @@ ar6000_configure_target(struct ar6_softc *ar)
{
u32 param;
- if (BMIReadMemory(ar->arHifDevice,
+ if (bmi_read_memory(ar->arHifDevice,
HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
(u8 *)¶m,
4)!= 0)
{
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for disabling debug logs failed\n"));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("bmi_read_memory for disabling debug logs failed\n"));
return A_ERROR;
}
param |= HI_OPTION_DISABLE_DBGLOG;
- if (BMIWriteMemory(ar->arHifDevice,
+ if (bmi_write_memory(ar->arHifDevice,
HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
(u8 *)¶m,
4) != 0)
{
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for HI_OPTION_DISABLE_DBGLOG\n"));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("bmi_write_memory for HI_OPTION_DISABLE_DBGLOG\n"));
return A_ERROR;
}
AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Firmware mode set\n"));
@@ -1484,26 +1484,26 @@ ar6000_configure_target(struct ar6_softc *ar)
param = AR6003_REV3_BOARD_EXT_DATA_ADDRESS;
ramReservedSz = AR6003_REV3_RAM_RESERVE_SIZE;
}
- if (BMIWriteMemory(ar->arHifDevice,
+ if (bmi_write_memory(ar->arHifDevice,
HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_ext_data),
(u8 *)¶m, 4) != 0) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
- ("BMIWriteMemory for "
+ ("bmi_write_memory for "
"hi_board_ext_data failed\n"));
return A_ERROR;
}
- if (BMIWriteMemory(ar->arHifDevice,
+ if (bmi_write_memory(ar->arHifDevice,
HOST_INTEREST_ITEM_ADDRESS(ar,
hi_end_RAM_reserve_sz),
(u8 *)&ramReservedSz, 4) != 0) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR ,
- ("BMIWriteMemory for "
+ ("bmi_write_memory for "
"hi_end_RAM_reserve_sz failed\n"));
return A_ERROR;
}
}
- /* since BMIInit is called in the driver layer, we have to set the block
+ /* since bmi_init is called in the driver layer, we have to set the block
* size here for the target */
if (ar6000_set_htc_params(ar->arHifDevice, ar->arTargetType,
@@ -1710,14 +1710,14 @@ ar6000_avail_ev(void *context, void *hif_handle)
A_INIT_TIMER(&ar->disconnect_timer, disconnect_timer_handler, dev);
- BMIInit();
+ bmi_init();
ar6000_sysfs_bmi_init(ar);
{
struct bmi_target_info targ_info;
- r = BMIGetTargetInfo(ar->arHifDevice, &targ_info);
+ r = bmi_get_target_info(ar->arHifDevice, &targ_info);
if (r)
goto avail_ev_failed;
@@ -1849,7 +1849,7 @@ ar6000_restart_endpoint(struct net_device *dev)
int status = 0;
struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev);
- BMIInit();
+ bmi_init();
do {
if ( (status=ar6000_configure_target(ar))!= 0)
break;
@@ -2046,7 +2046,7 @@ ar6000_destroy(struct net_device *dev, unsigned int unregister)
ar6000_sysfs_bmi_deinit(ar);
/* Cleanup BMI */
- BMICleanup();
+ bmi_cleanup();
/* Clear the tx counters */
memset(tx_attempt, 0, sizeof(tx_attempt));
@@ -2491,7 +2491,7 @@ int ar6000_init(struct net_device *dev)
/* Do we need to finish the BMI phase */
if ((wlaninitmode == WLAN_INIT_MODE_USR || wlaninitmode == WLAN_INIT_MODE_DRV) &&
- (BMIDone(ar->arHifDevice) != 0))
+ (bmi_done(ar->arHifDevice) != 0))
{
ret = -EIO;
goto ar6000_init_done;
@@ -2652,13 +2652,13 @@ int ar6000_init(struct net_device *dev)
if (regscanmode) {
u32 param;
- if (BMIReadMemory(ar->arHifDevice,
+ if (bmi_read_memory(ar->arHifDevice,
HOST_INTEREST_ITEM_ADDRESS(ar,
hi_option_flag),
(u8 *)¶m,
4) != 0) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
- ("BMIReadMemory forsetting "
+ ("bmi_read_memory forsetting "
"regscanmode failed\n"));
return A_ERROR;
}
@@ -2668,13 +2668,13 @@ int ar6000_init(struct net_device *dev)
else if (regscanmode == 2)
param |= HI_OPTION_INIT_REG_SCAN;
- if (BMIWriteMemory(ar->arHifDevice,
+ if (bmi_write_memory(ar->arHifDevice,
HOST_INTEREST_ITEM_ADDRESS(ar,
hi_option_flag),
(u8 *)¶m,
4) != 0) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
- ("BMIWriteMemory forsetting "
+ ("bmi_write_memory forsetting "
"regscanmode failed\n"));
return A_ERROR;
}
diff --git a/drivers/staging/ath6kl/os/linux/ar6000_raw_if.c b/drivers/staging/ath6kl/os/linux/ar6000_raw_if.c
index ae7c1dd..e05c94e 100644
--- a/drivers/staging/ath6kl/os/linux/ar6000_raw_if.c
+++ b/drivers/staging/ath6kl/os/linux/ar6000_raw_if.c
@@ -230,7 +230,7 @@ int ar6000_htc_raw_open(struct ar6_softc *ar)
/* Queue buffers to HTC for receive */
if ((status = HTCAddReceivePkt(ar->arHtcTarget, &buffer->HTCPacket)) != 0)
{
- BMIInit();
+ bmi_init();
return -EIO;
}
}
@@ -263,7 +263,7 @@ int ar6000_htc_raw_open(struct ar6_softc *ar)
/* Start the HTC component */
if ((status = HTCStart(ar->arHtcTarget)) != 0) {
- BMIInit();
+ bmi_init();
return -EIO;
}
@@ -280,7 +280,7 @@ int ar6000_htc_raw_close(struct ar6_softc *ar)
/* reset the device */
ar6000_reset_device(ar->arHifDevice, ar->arTargetType, true, false);
/* Initialize the BMI component */
- BMIInit();
+ bmi_init();
return 0;
}
--
1.7.0.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] ath6kl: Remove dead code with undefined EXPORT_HCI_BRIDGE_INTERFACE
2011-05-04 15:58 [PATCH 1/2] ath6kl: Remove dead code with undefined EXPORT_HCI_BRIDGE_INTERFACE Vasanthakumar Thiagarajan
2011-05-04 15:58 ` [PATCH 2/2] ath6kl: Merge Bootloader Management Interface (BMI) related header files into one Vasanthakumar Thiagarajan
@ 2011-05-06 16:33 ` Greg KH
2011-05-07 10:29 ` Vasanthakumar Thiagarajan
1 sibling, 1 reply; 6+ messages in thread
From: Greg KH @ 2011-05-06 16:33 UTC (permalink / raw)
To: Vasanthakumar Thiagarajan
Cc: devel, linux-wireless, Vipin.Mehta, Naveen.Singh
On Wed, May 04, 2011 at 09:28:10PM +0530, Vasanthakumar Thiagarajan wrote:
> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
It's not as dead as you think it is, this series causes a build
breakage.
PLEASE TEST YOUR PATCHES!
To not do so, like you did here just makes me grumpy and not want to
deal with them at all...
greg k-h
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] ath6kl: Remove dead code with undefined EXPORT_HCI_BRIDGE_INTERFACE
2011-05-06 16:33 ` [PATCH 1/2] ath6kl: Remove dead code with undefined EXPORT_HCI_BRIDGE_INTERFACE Greg KH
@ 2011-05-07 10:29 ` Vasanthakumar Thiagarajan
2011-05-07 15:42 ` Greg KH
0 siblings, 1 reply; 6+ messages in thread
From: Vasanthakumar Thiagarajan @ 2011-05-07 10:29 UTC (permalink / raw)
To: Greg KH
Cc: Vasanth Thiagarajan, devel, linux-wireless, Vipin Mehta, Naveen Singh
On Fri, May 06, 2011 at 10:03:20PM +0530, Greg KH wrote:
> On Wed, May 04, 2011 at 09:28:10PM +0530, Vasanthakumar Thiagarajan wrote:
> > Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
>
> It's not as dead as you think it is, this series causes a build
> breakage.
>
> PLEASE TEST YOUR PATCHES!
>
> To not do so, like you did here just makes me grumpy and not want to
> deal with them at all...
I'm really sorry for any trouble with those patches. I do compile
and test my patches. Unfortunately I do not see the build breakage
with that patch series. Can you please share you config file?.
Vasanth
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] ath6kl: Remove dead code with undefined EXPORT_HCI_BRIDGE_INTERFACE
2011-05-07 10:29 ` Vasanthakumar Thiagarajan
@ 2011-05-07 15:42 ` Greg KH
2011-05-07 16:02 ` Vasanthakumar Thiagarajan
0 siblings, 1 reply; 6+ messages in thread
From: Greg KH @ 2011-05-07 15:42 UTC (permalink / raw)
To: Vasanthakumar Thiagarajan
Cc: Vasanth Thiagarajan, devel, linux-wireless, Vipin Mehta, Naveen Singh
[-- Attachment #1: Type: text/plain, Size: 727 bytes --]
On Sat, May 07, 2011 at 03:59:07PM +0530, Vasanthakumar Thiagarajan wrote:
> On Fri, May 06, 2011 at 10:03:20PM +0530, Greg KH wrote:
> > On Wed, May 04, 2011 at 09:28:10PM +0530, Vasanthakumar Thiagarajan wrote:
> > > Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
> >
> > It's not as dead as you think it is, this series causes a build
> > breakage.
> >
> > PLEASE TEST YOUR PATCHES!
> >
> > To not do so, like you did here just makes me grumpy and not want to
> > deal with them at all...
>
> I'm really sorry for any trouble with those patches. I do compile
> and test my patches. Unfortunately I do not see the build breakage
> with that patch series. Can you please share you config file?.
Attached.
[-- Attachment #2: .config.gz --]
[-- Type: application/x-gzip, Size: 21891 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] ath6kl: Remove dead code with undefined EXPORT_HCI_BRIDGE_INTERFACE
2011-05-07 15:42 ` Greg KH
@ 2011-05-07 16:02 ` Vasanthakumar Thiagarajan
0 siblings, 0 replies; 6+ messages in thread
From: Vasanthakumar Thiagarajan @ 2011-05-07 16:02 UTC (permalink / raw)
To: Greg KH
Cc: Vasanth Thiagarajan, devel, linux-wireless, Vipin Mehta, Naveen Singh
On Sat, May 07, 2011 at 09:12:28PM +0530, Greg KH wrote:
> On Sat, May 07, 2011 at 03:59:07PM +0530, Vasanthakumar Thiagarajan wrote:
> > On Fri, May 06, 2011 at 10:03:20PM +0530, Greg KH wrote:
> > > On Wed, May 04, 2011 at 09:28:10PM +0530, Vasanthakumar Thiagarajan wrote:
> > > > Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
> > >
> > > It's not as dead as you think it is, this series causes a build
> > > breakage.
> > >
> > > PLEASE TEST YOUR PATCHES!
> > >
> > > To not do so, like you did here just makes me grumpy and not want to
> > > deal with them at all...
> >
> > I'm really sorry for any trouble with those patches. I do compile
> > and test my patches. Unfortunately I do not see the build breakage
> > with that patch series. Can you please share you config file?.
>
> Attached.
Really sorry again. I mistakenly moved a global variable
to #ifdef ATH_DEBUG_MODULE. As I was testing with debug
enabled I did not hit this issue.
Thanks,
Vasanth
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-05-07 16:02 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-05-04 15:58 [PATCH 1/2] ath6kl: Remove dead code with undefined EXPORT_HCI_BRIDGE_INTERFACE Vasanthakumar Thiagarajan
2011-05-04 15:58 ` [PATCH 2/2] ath6kl: Merge Bootloader Management Interface (BMI) related header files into one Vasanthakumar Thiagarajan
2011-05-06 16:33 ` [PATCH 1/2] ath6kl: Remove dead code with undefined EXPORT_HCI_BRIDGE_INTERFACE Greg KH
2011-05-07 10:29 ` Vasanthakumar Thiagarajan
2011-05-07 15:42 ` Greg KH
2011-05-07 16:02 ` Vasanthakumar Thiagarajan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.