* [GIT PULL] First round of SCSI updates for 2.6.39 merge window
@ 2011-05-20 10:41 James Bottomley
2011-05-20 13:01 ` Christoph Hellwig
0 siblings, 1 reply; 7+ messages in thread
From: James Bottomley @ 2011-05-20 10:41 UTC (permalink / raw)
To: Andrew Morton, Linus Torvalds; +Cc: linux-scsi, linux-kernel
This represents the usual round of driver updates (fcoe, lpfc, qla2xxx,
bnx2i, mpt2sas/fusion, iscsi, bnx2fc, be2iscsi, mvsas and hpsa) plus a
new fc module for the in-kernel target infrastructure and final removal
of the SCSI serial number, which served only to bounce lock cache lines
in the critical path.
The patch is available here:
master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
The short changelog is:
Andrew Vasquez (10):
qla2xxx: Clear complete initialization control block.
qla2xxx: Allow an override of the registered maximum LUN.
qla2xxx: Properly set the dsd_list_len for dsd_chaining in cmd type 6.
qla2xxx: Verify login-state has transitioned to PRLI-completed.
qla2xxx: Update copyright banner.
qla2xxx: Free firmware PCB on logout request.
qla2xxx: Remove extraneous setting of FCF_ASYNC_SENT during login-done completion.
qla2xxx: Check for a match before attempting to set FCP-priority information.
qla2xxx: Correct calling contexts of qla2x00_mark_device_lost() in async paths.
qla2xxx: Display PortID information during FCP command-status handling.
Anton Blanchard (1):
ipr: Rate limit DMA mapping errors
Arun Easi (2):
qla2xxx: Fix hang during driver unload when vport is active.
qla2xxx: Fix vport delete hang when logins are outstanding.
Borislav Petkov (1):
mptsas: Fix annoying warning
Brian King (1):
ibmvscsi: Improve CRQ reset reliability
Chad Dupuis (3):
qla2xxx: Add qla82xx_rom_unlock() function.
qla2xxx: Log if qla82xx firmware fails to load from flash.
qla2xxx: Log fcport state transitions when debug messages are enabled.
Christoph Hellwig (4):
fusion: do not check serial_number in the abort handler
mpt2sas: do not check serial_number in the abort handler
usb-storage: do not increment cmd->serial_number
remove cmd->serial_number litter
Giridhar Malavali (6):
qla2xxx: Limit the logs in case device state does not change for ISP82xx.
qla2xxx: Add the ql2xdontresethba module_param.
qla2xxx: Display hardware/firmware registers to get more information about the error for ISP82xx.
qla2xxx: Perform FCoE context reset before trying adapter reset for ISP82xx.
qla2xxx: Remove extra call to qla82xx_check_fw_alive().
qla2xxx: Updated the reset sequence for ISP82xx.
James Smart (5):
lpfc 8.3.23: Update driver version to 8.3.23
lpfc 8.3.23: BSG additions and fixes
lpfc 8.3.23: Fixes related to new hardware
lpfc 8.3.23: Miscellaneous fixes
lpfc 8.3.23: Debugfs enhancements
Jayamohan Kallickal (8):
be2iscsi: update version
be2iscsi: fix chip cleanup
be2iscsi: fix boot hang due to interrupts not getting rearmed
be2iscsi: Fix for proper setting of FW
be2iscsi: check boot_kset is created before destroying it
be2iscsi: Set a timeout to FW
be2iscsi: Modifying Maintainer's emailid
be2iscsi: change in copyright notice
Jeff Mahoney (1):
iterate over devices individually for /proc/scsi/scsi
Jing Huang (1):
bfa: firmware download fix
Joe Carnuccio (5):
qla2xxx: Refactor call to qla2xxx_read_sfp for thermal temperature.
qla2xxx: Unify the read/write sfp mailbox command routines.
qla2xxx: Correctly read sfp single byte mailbox register.
qla2xxx: Correct buffer start in edc sysfs debug print.
qla2xxx: Add test for valid loop id to qla2x00_relogin().
Joe Perches (1):
hpsa: Change memset using sizeof(ptr) to sizeof(*ptr)
Julia Lawall (1):
bnx2fc: introduce missing kfree
Kashyap, Desai (4):
mptfusion: Bump version 3.4.19
mptfusion: Adding inline data padding support for TAPE drive.
mptfusion: Remove debug print from mptscsih_qcmd()
mpt2sas : WarpDrive New product SSS6200 support added
Kiran Patil (1):
tcm_fc: Adding FC_FC4 provider (tcm_fc) for FCoE target (TCM - target core) support
Kirill A. Shutemov (1):
esp, scsi_tgt_lib, fcoe: use list_move() instead of list_del()/list_add() combination
Kleber Sacilotto de Souza (2):
ipr: Driver version 2.5.2
ipr: increase the dump size for 64 bit adapters
Krishna Gudipati (1):
bfa: Move debugfs initialization before bfa init.
Madhuranath Iyengar (3):
qla2xxx: Use passed in host to initialize local scsi_qla_host in queuecommand function
qla2xxx: Update version number to 8.03.07.03-k.
qla2xxx: Update License file.
Martin George (1):
scsi_dh_alua: Attach to UNAVAILABLE/OFFLINE AAS devices
Mike Hernandez (1):
qla2xxx: Include request queue ID in the upper 16-bits of the I/O handle for Abort I/O IOCBs.
Moger, Babu (3):
scsi_dh_rdac : decide whether to send mode select based on operating mode
scsi_dh_rdac : Detect the different RDAC operating modes
scsi_dh_rdac : Add definitions for different RDAC operating modes
Nithin Nayak Sujir (5):
bnx2fc: increase cleanup wait time
bnx2fc: Do not use HBA_DBG macro when lport is not available
bnx2fc: call scsi_done if session goes to not ready from ready
bnx2fc: Release the reference to hba only after the interface is destroyed
scsi_transport_fc: Fix deadlock during fc_remove_host
Robert Love (3):
libfc: Move host_lock usage into ramp_up/down routines
fcoe: Remove mutex_trylock/restart_syscall checks
libfcoe: Remove mutex_trylock/restart_syscall checks
Saurav Kashyap (3):
qla2xxx: Add host number in reset and quiescent message logs.
qla2xxx: Update firmware version after flash update for ISP82xx.
qla2xxx: Fix virtual port failing to login after chip reset.
Shyam Iyer (1):
Log thin provisioning threshold event
Stephen M. Cameron (16):
hpsa: add P2000 to list of shared SAS devices
hpsa: do not attempt PCI power management reset method if we know it won't work.
hpsa: remove superfluous sleeps around reset code
hpsa: do soft reset if hard reset is broken
hpsa: use new doorbell-bit-5 reset method
hpsa: remove atrophied hpsa_scsi_setup function
hpsa: clarify messages around reset behavior
hpsa: increase time to wait for board reset
hpsa: factor out irq request code
hpsa: factor out cmd pool allocation functions
hpsa: wait longer for no-op to complete after resetting controller
hpsa: do a better job of detecting controller reset failure
hpsa: delete old unused padding garbage
hpsa: remove unused parameter from hpsa_complete_scsi_command()
hpsa: add readl after writel in interrupt mask setting code
hpsa: do readl after writel in main i/o path to ensure commands don't get lost.
Tomas Henzl (2):
arcmsr: simplify assumptions in dma_alloc_coherent()
arcmsr: simplify some double loops in sleeping functions
Vasu Dev (4):
bnx2fc: setup em for npiv port
fcoe: have fcoe log off and lport destroy before ndo_fcoe_disable
libfc: rec tov value and REC_TOV_CONST units usages is incorrect
libfc: remove duplicate ema_list init
Wayne Boyer (3):
ipr: improve interrupt service routine performance
ipr: remove unneeded volatile declarations
ipr: fix synchronous request flags for better performance
Xiangliang Yu (2):
mvsas: add support for Task collector mode and fixed relative bugs
mvsas: add support for Marvell 88SE9445/88SE9485
Yi Zou (4):
libfcoe: fix wrong comment in fcoe_transport_detach
libfcoe: fix possible buffer overflow in fcoe_transport_show
libfcoe: clean up netdev mapping properly when the transport goes away
fcoe: remove unnecessary module state check
And the diffstat:
Documentation/scsi/LICENSE.qla2xxx | 292 +++++++++-
MAINTAINERS | 4 +-
drivers/message/fusion/mptbase.h | 4 +-
drivers/message/fusion/mptsas.c | 4 +-
drivers/message/fusion/mptscsih.c | 13 +-
drivers/message/fusion/mptspi.c | 22 +
drivers/message/i2o/i2o_scsi.c | 4 +-
drivers/scsi/arcmsr/arcmsr_hba.c | 138 ++---
drivers/scsi/be2iscsi/be.h | 10 +-
drivers/scsi/be2iscsi/be_cmds.c | 11 +-
drivers/scsi/be2iscsi/be_cmds.h | 10 +-
drivers/scsi/be2iscsi/be_iscsi.c | 13 +-
drivers/scsi/be2iscsi/be_iscsi.h | 13 +-
drivers/scsi/be2iscsi/be_main.c | 51 +-
drivers/scsi/be2iscsi/be_main.h | 15 +-
drivers/scsi/be2iscsi/be_mgmt.c | 17 +-
drivers/scsi/be2iscsi/be_mgmt.h | 13 +-
drivers/scsi/bfa/bfad.c | 61 ++-
drivers/scsi/bfa/bfad_debugfs.c | 33 +-
drivers/scsi/bfa/bfad_im.h | 25 -
drivers/scsi/bnx2fc/bnx2fc.h | 2 +-
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 35 +-
drivers/scsi/bnx2fc/bnx2fc_hwi.c | 3 +
drivers/scsi/bnx2fc/bnx2fc_io.c | 6 +
drivers/scsi/constants.c | 1 +
drivers/scsi/dc395x.c | 193 +++---
drivers/scsi/device_handler/scsi_dh_alua.c | 2 +-
drivers/scsi/device_handler/scsi_dh_rdac.c | 72 ++-
drivers/scsi/dpt_i2o.c | 6 +-
drivers/scsi/eata.c | 66 +-
drivers/scsi/eata_pio.c | 19 +-
drivers/scsi/esp_scsi.c | 6 +-
drivers/scsi/fcoe/fcoe.c | 202 ++----
drivers/scsi/fcoe/fcoe_ctlr.c | 6 +-
drivers/scsi/fcoe/fcoe_transport.c | 56 +-
drivers/scsi/hpsa.c | 496 ++++++++++++---
drivers/scsi/hpsa.h | 15 +-
drivers/scsi/hpsa_cmd.h | 11 +-
drivers/scsi/ibmvscsi/ibmvscsi.c | 3 +-
drivers/scsi/in2000.c | 29 +-
drivers/scsi/ipr.c | 158 ++++--
drivers/scsi/ipr.h | 22 +-
drivers/scsi/libfc/fc_fcp.c | 57 +-
drivers/scsi/libfc/fc_lport.c | 1 -
drivers/scsi/lpfc/lpfc.h | 2 +
drivers/scsi/lpfc/lpfc_bsg.c | 59 +-
drivers/scsi/lpfc/lpfc_bsg.h | 130 ++++
drivers/scsi/lpfc/lpfc_debugfs.c | 931 +++++++++++++++++++++-------
drivers/scsi/lpfc/lpfc_debugfs.h | 48 ++-
drivers/scsi/lpfc/lpfc_els.c | 44 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 6 +-
drivers/scsi/lpfc/lpfc_hw4.h | 18 +-
drivers/scsi/lpfc/lpfc_init.c | 19 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/lpfc/lpfc_scsi.c | 14 +-
drivers/scsi/lpfc/lpfc_sli.c | 32 +-
drivers/scsi/lpfc/lpfc_version.h | 2 +-
drivers/scsi/megaraid.c | 20 +-
drivers/scsi/megaraid/megaraid_mbox.c | 37 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 13 +-
drivers/scsi/mesh.c | 3 +-
drivers/scsi/mpt2sas/mpt2sas_base.c | 42 +-
drivers/scsi/mpt2sas/mpt2sas_base.h | 49 ++-
drivers/scsi/mpt2sas/mpt2sas_ctl.c | 5 +-
drivers/scsi/mpt2sas/mpt2sas_ctl.h | 1 +
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 617 +++++++++++++++++--
drivers/scsi/mvsas/Kconfig | 1 +
drivers/scsi/mvsas/Makefile | 1 +
drivers/scsi/mvsas/mv_64xx.c | 1 +
drivers/scsi/mvsas/mv_64xx.h | 1 +
drivers/scsi/mvsas/mv_94xx.c | 1 +
drivers/scsi/mvsas/mv_94xx.h | 1 +
drivers/scsi/mvsas/mv_chips.h | 1 +
drivers/scsi/mvsas/mv_defs.h | 3 +
drivers/scsi/mvsas/mv_init.c | 67 ++-
drivers/scsi/mvsas/mv_sas.c | 385 ++++++++----
drivers/scsi/mvsas/mv_sas.h | 8 +
drivers/scsi/ncr53c8xx.c | 2 +-
drivers/scsi/qla1280.c | 2 +-
drivers/scsi/qla2xxx/qla_attr.c | 23 +-
drivers/scsi/qla2xxx/qla_bsg.c | 2 +-
drivers/scsi/qla2xxx/qla_bsg.h | 2 +-
drivers/scsi/qla2xxx/qla_dbg.c | 2 +-
drivers/scsi/qla2xxx/qla_dbg.h | 2 +-
drivers/scsi/qla2xxx/qla_def.h | 10 +-
drivers/scsi/qla2xxx/qla_dfs.c | 2 +-
drivers/scsi/qla2xxx/qla_fw.h | 5 +-
drivers/scsi/qla2xxx/qla_gbl.h | 18 +-
drivers/scsi/qla2xxx/qla_gs.c | 2 +-
drivers/scsi/qla2xxx/qla_init.c | 54 ++-
drivers/scsi/qla2xxx/qla_inline.h | 21 +-
drivers/scsi/qla2xxx/qla_iocb.c | 2 +-
drivers/scsi/qla2xxx/qla_isr.c | 43 +-
drivers/scsi/qla2xxx/qla_mbx.c | 151 ++---
drivers/scsi/qla2xxx/qla_mid.c | 6 +-
drivers/scsi/qla2xxx/qla_nx.c | 97 +++-
drivers/scsi/qla2xxx/qla_nx.h | 2 +-
drivers/scsi/qla2xxx/qla_os.c | 85 ++-
drivers/scsi/qla2xxx/qla_settings.h | 2 +-
drivers/scsi/qla2xxx/qla_sup.c | 2 +-
drivers/scsi/qla2xxx/qla_version.h | 6 +-
drivers/scsi/qla4xxx/ql4_os.c | 5 +-
drivers/scsi/scsi_error.c | 6 +
drivers/scsi/scsi_proc.c | 58 ++-
drivers/scsi/scsi_tgt_lib.c | 6 +-
drivers/scsi/scsi_transport_fc.c | 11 +-
drivers/scsi/tmscsim.c | 22 +-
drivers/scsi/u14-34f.c | 61 +-
drivers/scsi/wd33c93.c | 45 +-
drivers/target/Kconfig | 1 +
drivers/target/Makefile | 2 +
drivers/target/tcm_fc/Kconfig | 5 +
drivers/target/tcm_fc/Makefile | 15 +
drivers/target/tcm_fc/tcm_fc.h | 215 +++++++
drivers/target/tcm_fc/tfc_cmd.c | 696 +++++++++++++++++++++
drivers/target/tcm_fc/tfc_conf.c | 677 ++++++++++++++++++++
drivers/target/tcm_fc/tfc_io.c | 374 +++++++++++
drivers/target/tcm_fc/tfc_sess.c | 541 ++++++++++++++++
drivers/usb/storage/isd200.c | 1 -
119 files changed, 6388 insertions(+), 1680 deletions(-)
create mode 100644 drivers/target/tcm_fc/Kconfig
create mode 100644 drivers/target/tcm_fc/Makefile
create mode 100644 drivers/target/tcm_fc/tcm_fc.h
create mode 100644 drivers/target/tcm_fc/tfc_cmd.c
create mode 100644 drivers/target/tcm_fc/tfc_conf.c
create mode 100644 drivers/target/tcm_fc/tfc_io.c
create mode 100644 drivers/target/tcm_fc/tfc_sess.c
James
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [GIT PULL] First round of SCSI updates for 2.6.39 merge window
2011-05-20 10:41 [GIT PULL] First round of SCSI updates for 2.6.39 merge window James Bottomley
@ 2011-05-20 13:01 ` Christoph Hellwig
0 siblings, 0 replies; 7+ messages in thread
From: Christoph Hellwig @ 2011-05-20 13:01 UTC (permalink / raw)
To: James Bottomley; +Cc: Andrew Morton, Linus Torvalds, linux-scsi, linux-kernel
On Fri, May 20, 2011 at 02:41:58PM +0400, James Bottomley wrote:
> new fc module for the in-kernel target infrastructure and final removal
> of the SCSI serial number, which served only to bounce lock cache lines
> in the critical path.
It's actually not completely gone yet, but we're one step closer now.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [GIT PULL] First round of SCSI updates for 2.6.39 merge window
2011-07-28 8:49 ` James Bottomley
@ 2011-07-28 15:55 ` Randy Dunlap
0 siblings, 0 replies; 7+ messages in thread
From: Randy Dunlap @ 2011-07-28 15:55 UTC (permalink / raw)
To: James Bottomley; +Cc: Andrew Morton, Linus Torvalds, linux-scsi, linux-kernel
On Thu, 28 Jul 2011 12:49:39 +0400 James Bottomley wrote:
> On Sat, 2011-07-23 at 10:27 -0700, Randy Dunlap wrote:
> > On Sat, 23 Jul 2011 21:17:32 +0400 James Bottomley wrote:
> >
> > > This represents the usual round of driver updates (fcoe, bfa, mpt2sas,
> > > iscsi, bnx2fc) plus a couple of fixes that didn't make 3.0 including the
> > > USB force eject oops.
> > >
> > > The patch is available here:
> > >
> > > master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
> >
> > Hi James,
> >
> > (please fix $subject)
>
> Hmm, reusability gone too far
>
> > What has happened to these 2 patches from 2011-June-21 ?
> >
> > Subject: [PATCH] scsi: fix NCR_Q720 section mismatch warning
> > Subject: [PATCH] scsi: fix sim710 section mismatch warnings
>
> Ralf is reworking them. Basically there's no point mucking with
> creating work via the endless sectional annotators in obsolete drivers,
> so he was just going to strip the annotations where they cause problems.
Thanks for the info.
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [GIT PULL] First round of SCSI updates for 2.6.39 merge window
2011-07-23 17:27 ` Randy Dunlap
@ 2011-07-28 8:49 ` James Bottomley
2011-07-28 15:55 ` Randy Dunlap
0 siblings, 1 reply; 7+ messages in thread
From: James Bottomley @ 2011-07-28 8:49 UTC (permalink / raw)
To: Randy Dunlap; +Cc: Andrew Morton, Linus Torvalds, linux-scsi, linux-kernel
On Sat, 2011-07-23 at 10:27 -0700, Randy Dunlap wrote:
> On Sat, 23 Jul 2011 21:17:32 +0400 James Bottomley wrote:
>
> > This represents the usual round of driver updates (fcoe, bfa, mpt2sas,
> > iscsi, bnx2fc) plus a couple of fixes that didn't make 3.0 including the
> > USB force eject oops.
> >
> > The patch is available here:
> >
> > master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
>
> Hi James,
>
> (please fix $subject)
Hmm, reusability gone too far
> What has happened to these 2 patches from 2011-June-21 ?
>
> Subject: [PATCH] scsi: fix NCR_Q720 section mismatch warning
> Subject: [PATCH] scsi: fix sim710 section mismatch warnings
Ralf is reworking them. Basically there's no point mucking with
creating work via the endless sectional annotators in obsolete drivers,
so he was just going to strip the annotations where they cause problems.
James
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [GIT PULL] First round of SCSI updates for 2.6.39 merge window
2011-07-23 17:17 James Bottomley
2011-07-23 17:27 ` Randy Dunlap
@ 2011-07-23 21:49 ` Giridhar Malavali
1 sibling, 0 replies; 7+ messages in thread
From: Giridhar Malavali @ 2011-07-23 21:49 UTC (permalink / raw)
To: James Bottomley, Andrew Morton, Linus Torvalds; +Cc: linux-scsi, linux-kernel
James,
Is qla2xxx changes submitted on 07/14/2011 scheduled for next round of
submission for merge window
Here is the pointer for the submission
http://marc.info/?l=linux-scsi&m=131067084700576&w=2
Any update?
Thanks,
Giridhar Malavali
>This represents the usual round of driver updates (fcoe, bfa, mpt2sas,
>iscsi, bnx2fc) plus a couple of fixes that didn't make 3.0 including the
>USB force eject oops.
>
>The patch is available here:
>
>master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
>
>The short changelog is:
>
>Abhijeet Joglekar (2):
> fnic: Update Maintainers list for fnic.
> fnic: fix incorrect use of SLAB_CACHE_DMA flag
>
>Andy Grover (1):
> iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]
>
>Bhanu Prakash Gollapudi (5):
> MAINTAINERS update for bnx2fc
> bnx2fc: Bumped version to 1.0.2
> bnx2fc: Fix kernel panic when deleting NPIV ports
> bnx2fc: scsi_dma_unmap() not invoked on IO completions
> bnx2fc: host stats show the link speed 'unknown' on NIC partitioned
>interfaces
>
>Douglas Gilbert (1):
> ses: requesting a fault indication
>
>Eddie Wai (4):
> bnx2i: Fixed kernel panic due to illegal usage of sc->request->cpu
> bnx2i: Updated copyright and bump version
> bnx2i: Modified to skip CNIC registration if iSCSI is not supported
> bnx2i: Added the use of kthreads to handle SCSI cmd completion
>
>Geert Uytterhoeven (10):
> sun3: Remove commented out merge_contiguous_buffers
> sun3: Add various missing NDEBUG* definitions
> sun3: Check for NCR_TIMEOUT being defined instead of having a value
> sun3: Provide a dummy NCR5380_exit()
> sun3: sun3scsi_detect() and NCR5380_init() should be __init
> mac_scsi: Remove unused variable default_instance
> mac_scsi: macscsi_detect() should be __init
> atari_NCR5380: Provide a dummy NCR5380_exit()
> atari_NCR5380: Remove obsolete variable oldto
> sun3_NCR5380: Split NEXT() for lvalues/rvalues
>
>James Bottomley (1):
> fix crash in scsi_dispatch_cmd()
>
>Karen Xie (1):
> cxgb3i: fixed programing of the dma page sizes
>
>Kashyap, Desai (7):
> mpt2sas: Bump version 09.100.00.00
> mpt2sas: Adding support for customer specific branding
> mpt2sas: Added DID_NO_CONNECT return when driver remove and avoid
>shutdown call
> mpt2sas: fix broadcast AEN and task management issue
> mpt2sas: Set max_sector count from module parameter
> mpt2sas MPI next revision header update
> mpt2sas: Fixed Big Indian Issues on 32 bit PPC
>
>Kay Sievers (1):
> sr: check_events() ignore GET_EVENT when TUR says otherwise
>
>Kiran Patil (6):
> tcm_fc: Fixing reference counting problem which was causing ft_sess
>to be deleted.
> libfc:Fix for exchange/seq loopup failure when FCoE stack is used
>as target and connected to windows initaitor
> fcoe: Amends previous patch, Round-robin based selection of CPU for
>post processing of incoming request for FCoE target
> fcoe: Round-robin based selection of CPU for post-processing of
>incoming commands
> fcoe: Unable to select the exchangeID from offload pool for storage
>targets
> libfc: Enhancement to RPORT state machine applicable only for VN2VN
>mode
>
>Krishna Gudipati (27):
> bfa: Update the driver version to 3.0.2.1
> bfa: Driver and BSG enhancements.
> bfa: Added support to query PHY.
> bfa: Added HBA diagnostics support.
> bfa: Added support for flash configuration
> bfa: Added support to obtain SFP info.
> bfa: Added support for CEE info and stats query.
> bfa: Extend BSG interface.
> bfa: FCS bug fixes.
> bfa: DMA memory allocation enhancement.
> bfa: Brocade-1860 Fabric Adapter vHBA support.
> bfa: Brocade-1860 Fabric Adapter PLL init fixes.
> bfa: Added Fabric Assigned Address(FAA) support
> bfa: IOC bug fixes.
> bfa: Enable ASIC block configuration and query.
> bfa: Update the driver version to 3.0.2.0
> bfa: Add BSG interface to support ELS, CT and vendor commands.
> bfa: Driver initialization and model description fix
> bfa: Enhancement for fcpim and IO tag handling.
> bfa: FC credit recovery and misc bug fixes.
> bfa: Brocade-1860 Fabric Adapter 16Gbs support and flash controller
>fixes.
> bfa: IOC and PLL init changes for Brocade-1860 Fabric Adapter.
> bfa: Changes to support vport disable and enable operations.
> bfa: Brocade-1860 Fabric Adapter Hardware Enablement
> bfa: Add pbc port disable check and fix LPS message name
> bfa: Introduce IOC event notification mechanism.
> bfa: Introduced generic address len pair to represent DMA memory
>chunk.
>
>Mike Christie (4):
> libiscsi_tcp: fix LLD data allocation
> iscsi_tcp: fix locking around iscsi sk user data
> iscsi_ibft, be2iscsi, iscsi_boot: fix boot kobj data lifetime
>management
> iscsi_boot_sysfs: have this module check for null on destruction
>
>Neerav Parikh (1):
> fcoe: Rearrange fcoe port and NPIV port cleanup
>
>Ondrej Zary (1):
> aha152x: add missing ISA PNP IDs
>
>Stephen Boyd (1):
> lpfc: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warning
>
>Vasu Dev (1):
> libfc: post reset event on lport reset
>
>Werner Fink (1):
> Blacklist Traxdata CDR4120 and IOMEGA Zip drive to avoid lock ups.
>
>Yi Zou (2):
> fcoe: support ndo_fcoe_ddp_target() for DDP in FCoE targe
> libfc, tcm_fc: add ddp_targ() to libfc function template to supprot
>FCoE DDP in target mode
>
>And the diffstat
>
> MAINTAINERS | 9 +-
> block/blk-core.c | 3 +
> block/blk-exec.c | 7 +
> drivers/firmware/iscsi_ibft.c | 14 +-
> drivers/scsi/aha152x.c | 17 +-
> drivers/scsi/atari_NCR5380.c | 6 +-
> drivers/scsi/atari_scsi.c | 1 +
> drivers/scsi/be2iscsi/be_main.c | 199 +-
> drivers/scsi/bfa/Makefile | 2 +-
> drivers/scsi/bfa/bfa.h | 144 +-
> drivers/scsi/bfa/bfa_core.c | 878 ++++++---
> drivers/scsi/bfa/bfa_defs.h | 583 ++++++-
> drivers/scsi/bfa/bfa_defs_fcs.h | 27 +-
> drivers/scsi/bfa/bfa_defs_svc.h | 170 ++-
> drivers/scsi/bfa/bfa_fc.h | 11 +-
> drivers/scsi/bfa/bfa_fcbuild.c | 49 +-
> drivers/scsi/bfa/bfa_fcbuild.h | 16 +-
> drivers/scsi/bfa/bfa_fcpim.c | 478 ++++-
> drivers/scsi/bfa/bfa_fcpim.h | 89 +-
> drivers/scsi/bfa/bfa_fcs.c | 153 ++-
> drivers/scsi/bfa/bfa_fcs.h | 31 +-
> drivers/scsi/bfa/bfa_fcs_fcpim.c | 10 +
> drivers/scsi/bfa/bfa_fcs_lport.c | 329 +++-
> drivers/scsi/bfa/bfa_fcs_rport.c | 121 +-
> drivers/scsi/bfa/bfa_hw_cb.c | 94 +-
> drivers/scsi/bfa/bfa_hw_ct.c | 89 +-
> drivers/scsi/bfa/bfa_ioc.c | 2992
>+++++++++++++++++++++++++++--
> drivers/scsi/bfa/bfa_ioc.h | 609 ++++++-
> drivers/scsi/bfa/bfa_ioc_cb.c | 69 +-
> drivers/scsi/bfa/bfa_ioc_ct.c | 516 ++++-
> drivers/scsi/bfa/bfa_modules.h | 27 +-
> drivers/scsi/bfa/bfa_port.c | 428 ++++-
> drivers/scsi/bfa/bfa_port.h | 62 +-
> drivers/scsi/bfa/bfa_svc.c | 1136 ++++++++---
> drivers/scsi/bfa/bfa_svc.h | 151 ++-
> drivers/scsi/bfa/bfad.c | 295 ++--
> drivers/scsi/bfa/bfad_attr.c | 53 +-
> drivers/scsi/bfa/bfad_bsg.c | 2163 +++++++++++++++++++++
> drivers/scsi/bfa/bfad_bsg.h | 509 +++++
> drivers/scsi/bfa/bfad_debugfs.c | 14 +-
> drivers/scsi/bfa/bfad_drv.h | 26 +-
> drivers/scsi/bfa/bfad_im.c | 32 +-
> drivers/scsi/bfa/bfad_im.h | 3 +
> drivers/scsi/bfa/bfi.h | 637 ++++++-
> drivers/scsi/bfa/bfi_cbreg.h | 305 ---
> drivers/scsi/bfa/bfi_ctreg.h | 636 ------
> drivers/scsi/bfa/bfi_ms.h | 159 ++-
> drivers/scsi/bfa/bfi_reg.h | 450 +++++
> drivers/scsi/bnx2fc/bnx2fc.h | 10 +-
> drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 33 +-
> drivers/scsi/bnx2fc/bnx2fc_hwi.c | 24 +-
> drivers/scsi/bnx2fc/bnx2fc_io.c | 2 +-
> drivers/scsi/bnx2i/57xx_iscsi_constants.h | 2 +-
> drivers/scsi/bnx2i/57xx_iscsi_hsi.h | 2 +-
> drivers/scsi/bnx2i/bnx2i.h | 33 +-
> drivers/scsi/bnx2i/bnx2i_hwi.c | 199 ++-
> drivers/scsi/bnx2i/bnx2i_init.c | 153 ++-
> drivers/scsi/bnx2i/bnx2i_iscsi.c | 38 +-
> drivers/scsi/bnx2i/bnx2i_sysfs.c | 2 +-
> drivers/scsi/cxgbi/cxgb3i/cxgb3i.c | 4 +-
> drivers/scsi/fcoe/fcoe.c | 174 ++-
> drivers/scsi/fnic/fnic.h | 2 +-
> drivers/scsi/fnic/fnic_main.c | 21 +-
> drivers/scsi/fnic/fnic_scsi.c | 2 +-
> drivers/scsi/iscsi_boot_sysfs.c | 31 +-
> drivers/scsi/iscsi_tcp.c | 61 +-
> drivers/scsi/libfc/fc_exch.c | 26 +-
> drivers/scsi/libfc/fc_lport.c | 2 +
> drivers/scsi/libfc/fc_rport.c | 14 +
> drivers/scsi/libiscsi.c | 14 +-
> drivers/scsi/libiscsi_tcp.c | 14 +-
> drivers/scsi/lpfc/lpfc_debugfs.c | 3 +-
> drivers/scsi/mac_scsi.c | 14 +-
> drivers/scsi/mpt2sas/mpi/mpi2.h | 12 +-
> drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 74 +-
> drivers/scsi/mpt2sas/mpi/mpi2_init.h | 6 +-
> drivers/scsi/mpt2sas/mpi/mpi2_ioc.h | 4 +-
> drivers/scsi/mpt2sas/mpt2sas_base.c | 84 +-
> drivers/scsi/mpt2sas/mpt2sas_base.h | 77 +-
> drivers/scsi/mpt2sas/mpt2sas_ctl.c | 12 +-
> drivers/scsi/mpt2sas/mpt2sas_debug.h | 2 +-
> drivers/scsi/mpt2sas/mpt2sas_scsih.c | 279 +++-
> drivers/scsi/mpt2sas/mpt2sas_transport.c | 24 +-
> drivers/scsi/scsi_devinfo.c | 2 +
> drivers/scsi/scsi_lib.c | 2 +
> drivers/scsi/ses.c | 6 +-
> drivers/scsi/sr.c | 46 +-
> drivers/scsi/sr.h | 7 +
> drivers/scsi/sun3_NCR5380.c | 98 +-
> drivers/scsi/sun3_scsi.c | 11 +-
> drivers/scsi/sun3_scsi_vme.c | 11 +-
> drivers/target/tcm_fc/tfc_cmd.c | 26 +-
> include/linux/iscsi_boot_sysfs.h | 16 +-
> include/scsi/iscsi_proto.h | 18 +-
> include/scsi/libfc.h | 8 +
> include/scsi/libiscsi.h | 2 +-
> 96 files changed, 13313 insertions(+), 3196 deletions(-)
> create mode 100644 drivers/scsi/bfa/bfad_bsg.c
> create mode 100644 drivers/scsi/bfa/bfad_bsg.h
> delete mode 100644 drivers/scsi/bfa/bfi_cbreg.h
> delete mode 100644 drivers/scsi/bfa/bfi_ctreg.h
> create mode 100644 drivers/scsi/bfa/bfi_reg.h
>
>James
>
>
>--
>To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [GIT PULL] First round of SCSI updates for 2.6.39 merge window
2011-07-23 17:17 James Bottomley
@ 2011-07-23 17:27 ` Randy Dunlap
2011-07-28 8:49 ` James Bottomley
2011-07-23 21:49 ` Giridhar Malavali
1 sibling, 1 reply; 7+ messages in thread
From: Randy Dunlap @ 2011-07-23 17:27 UTC (permalink / raw)
To: James Bottomley; +Cc: Andrew Morton, Linus Torvalds, linux-scsi, linux-kernel
On Sat, 23 Jul 2011 21:17:32 +0400 James Bottomley wrote:
> This represents the usual round of driver updates (fcoe, bfa, mpt2sas,
> iscsi, bnx2fc) plus a couple of fixes that didn't make 3.0 including the
> USB force eject oops.
>
> The patch is available here:
>
> master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
Hi James,
(please fix $subject)
What has happened to these 2 patches from 2011-June-21 ?
Subject: [PATCH] scsi: fix NCR_Q720 section mismatch warning
Subject: [PATCH] scsi: fix sim710 section mismatch warnings
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply [flat|nested] 7+ messages in thread
* [GIT PULL] First round of SCSI updates for 2.6.39 merge window
@ 2011-07-23 17:17 James Bottomley
2011-07-23 17:27 ` Randy Dunlap
2011-07-23 21:49 ` Giridhar Malavali
0 siblings, 2 replies; 7+ messages in thread
From: James Bottomley @ 2011-07-23 17:17 UTC (permalink / raw)
To: Andrew Morton, Linus Torvalds; +Cc: linux-scsi, linux-kernel
This represents the usual round of driver updates (fcoe, bfa, mpt2sas,
iscsi, bnx2fc) plus a couple of fixes that didn't make 3.0 including the
USB force eject oops.
The patch is available here:
master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
The short changelog is:
Abhijeet Joglekar (2):
fnic: Update Maintainers list for fnic.
fnic: fix incorrect use of SLAB_CACHE_DMA flag
Andy Grover (1):
iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]
Bhanu Prakash Gollapudi (5):
MAINTAINERS update for bnx2fc
bnx2fc: Bumped version to 1.0.2
bnx2fc: Fix kernel panic when deleting NPIV ports
bnx2fc: scsi_dma_unmap() not invoked on IO completions
bnx2fc: host stats show the link speed 'unknown' on NIC partitioned interfaces
Douglas Gilbert (1):
ses: requesting a fault indication
Eddie Wai (4):
bnx2i: Fixed kernel panic due to illegal usage of sc->request->cpu
bnx2i: Updated copyright and bump version
bnx2i: Modified to skip CNIC registration if iSCSI is not supported
bnx2i: Added the use of kthreads to handle SCSI cmd completion
Geert Uytterhoeven (10):
sun3: Remove commented out merge_contiguous_buffers
sun3: Add various missing NDEBUG* definitions
sun3: Check for NCR_TIMEOUT being defined instead of having a value
sun3: Provide a dummy NCR5380_exit()
sun3: sun3scsi_detect() and NCR5380_init() should be __init
mac_scsi: Remove unused variable default_instance
mac_scsi: macscsi_detect() should be __init
atari_NCR5380: Provide a dummy NCR5380_exit()
atari_NCR5380: Remove obsolete variable oldto
sun3_NCR5380: Split NEXT() for lvalues/rvalues
James Bottomley (1):
fix crash in scsi_dispatch_cmd()
Karen Xie (1):
cxgb3i: fixed programing of the dma page sizes
Kashyap, Desai (7):
mpt2sas: Bump version 09.100.00.00
mpt2sas: Adding support for customer specific branding
mpt2sas: Added DID_NO_CONNECT return when driver remove and avoid shutdown call
mpt2sas: fix broadcast AEN and task management issue
mpt2sas: Set max_sector count from module parameter
mpt2sas MPI next revision header update
mpt2sas: Fixed Big Indian Issues on 32 bit PPC
Kay Sievers (1):
sr: check_events() ignore GET_EVENT when TUR says otherwise
Kiran Patil (6):
tcm_fc: Fixing reference counting problem which was causing ft_sess to be deleted.
libfc:Fix for exchange/seq loopup failure when FCoE stack is used as target and connected to windows initaitor
fcoe: Amends previous patch, Round-robin based selection of CPU for post processing of incoming request for FCoE target
fcoe: Round-robin based selection of CPU for post-processing of incoming commands
fcoe: Unable to select the exchangeID from offload pool for storage targets
libfc: Enhancement to RPORT state machine applicable only for VN2VN mode
Krishna Gudipati (27):
bfa: Update the driver version to 3.0.2.1
bfa: Driver and BSG enhancements.
bfa: Added support to query PHY.
bfa: Added HBA diagnostics support.
bfa: Added support for flash configuration
bfa: Added support to obtain SFP info.
bfa: Added support for CEE info and stats query.
bfa: Extend BSG interface.
bfa: FCS bug fixes.
bfa: DMA memory allocation enhancement.
bfa: Brocade-1860 Fabric Adapter vHBA support.
bfa: Brocade-1860 Fabric Adapter PLL init fixes.
bfa: Added Fabric Assigned Address(FAA) support
bfa: IOC bug fixes.
bfa: Enable ASIC block configuration and query.
bfa: Update the driver version to 3.0.2.0
bfa: Add BSG interface to support ELS, CT and vendor commands.
bfa: Driver initialization and model description fix
bfa: Enhancement for fcpim and IO tag handling.
bfa: FC credit recovery and misc bug fixes.
bfa: Brocade-1860 Fabric Adapter 16Gbs support and flash controller fixes.
bfa: IOC and PLL init changes for Brocade-1860 Fabric Adapter.
bfa: Changes to support vport disable and enable operations.
bfa: Brocade-1860 Fabric Adapter Hardware Enablement
bfa: Add pbc port disable check and fix LPS message name
bfa: Introduce IOC event notification mechanism.
bfa: Introduced generic address len pair to represent DMA memory chunk.
Mike Christie (4):
libiscsi_tcp: fix LLD data allocation
iscsi_tcp: fix locking around iscsi sk user data
iscsi_ibft, be2iscsi, iscsi_boot: fix boot kobj data lifetime management
iscsi_boot_sysfs: have this module check for null on destruction
Neerav Parikh (1):
fcoe: Rearrange fcoe port and NPIV port cleanup
Ondrej Zary (1):
aha152x: add missing ISA PNP IDs
Stephen Boyd (1):
lpfc: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warning
Vasu Dev (1):
libfc: post reset event on lport reset
Werner Fink (1):
Blacklist Traxdata CDR4120 and IOMEGA Zip drive to avoid lock ups.
Yi Zou (2):
fcoe: support ndo_fcoe_ddp_target() for DDP in FCoE targe
libfc, tcm_fc: add ddp_targ() to libfc function template to supprot FCoE DDP in target mode
And the diffstat
MAINTAINERS | 9 +-
block/blk-core.c | 3 +
block/blk-exec.c | 7 +
drivers/firmware/iscsi_ibft.c | 14 +-
drivers/scsi/aha152x.c | 17 +-
drivers/scsi/atari_NCR5380.c | 6 +-
drivers/scsi/atari_scsi.c | 1 +
drivers/scsi/be2iscsi/be_main.c | 199 +-
drivers/scsi/bfa/Makefile | 2 +-
drivers/scsi/bfa/bfa.h | 144 +-
drivers/scsi/bfa/bfa_core.c | 878 ++++++---
drivers/scsi/bfa/bfa_defs.h | 583 ++++++-
drivers/scsi/bfa/bfa_defs_fcs.h | 27 +-
drivers/scsi/bfa/bfa_defs_svc.h | 170 ++-
drivers/scsi/bfa/bfa_fc.h | 11 +-
drivers/scsi/bfa/bfa_fcbuild.c | 49 +-
drivers/scsi/bfa/bfa_fcbuild.h | 16 +-
drivers/scsi/bfa/bfa_fcpim.c | 478 ++++-
drivers/scsi/bfa/bfa_fcpim.h | 89 +-
drivers/scsi/bfa/bfa_fcs.c | 153 ++-
drivers/scsi/bfa/bfa_fcs.h | 31 +-
drivers/scsi/bfa/bfa_fcs_fcpim.c | 10 +
drivers/scsi/bfa/bfa_fcs_lport.c | 329 +++-
drivers/scsi/bfa/bfa_fcs_rport.c | 121 +-
drivers/scsi/bfa/bfa_hw_cb.c | 94 +-
drivers/scsi/bfa/bfa_hw_ct.c | 89 +-
drivers/scsi/bfa/bfa_ioc.c | 2992 +++++++++++++++++++++++++++--
drivers/scsi/bfa/bfa_ioc.h | 609 ++++++-
drivers/scsi/bfa/bfa_ioc_cb.c | 69 +-
drivers/scsi/bfa/bfa_ioc_ct.c | 516 ++++-
drivers/scsi/bfa/bfa_modules.h | 27 +-
drivers/scsi/bfa/bfa_port.c | 428 ++++-
drivers/scsi/bfa/bfa_port.h | 62 +-
drivers/scsi/bfa/bfa_svc.c | 1136 ++++++++---
drivers/scsi/bfa/bfa_svc.h | 151 ++-
drivers/scsi/bfa/bfad.c | 295 ++--
drivers/scsi/bfa/bfad_attr.c | 53 +-
drivers/scsi/bfa/bfad_bsg.c | 2163 +++++++++++++++++++++
drivers/scsi/bfa/bfad_bsg.h | 509 +++++
drivers/scsi/bfa/bfad_debugfs.c | 14 +-
drivers/scsi/bfa/bfad_drv.h | 26 +-
drivers/scsi/bfa/bfad_im.c | 32 +-
drivers/scsi/bfa/bfad_im.h | 3 +
drivers/scsi/bfa/bfi.h | 637 ++++++-
drivers/scsi/bfa/bfi_cbreg.h | 305 ---
drivers/scsi/bfa/bfi_ctreg.h | 636 ------
drivers/scsi/bfa/bfi_ms.h | 159 ++-
drivers/scsi/bfa/bfi_reg.h | 450 +++++
drivers/scsi/bnx2fc/bnx2fc.h | 10 +-
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 33 +-
drivers/scsi/bnx2fc/bnx2fc_hwi.c | 24 +-
drivers/scsi/bnx2fc/bnx2fc_io.c | 2 +-
drivers/scsi/bnx2i/57xx_iscsi_constants.h | 2 +-
drivers/scsi/bnx2i/57xx_iscsi_hsi.h | 2 +-
drivers/scsi/bnx2i/bnx2i.h | 33 +-
drivers/scsi/bnx2i/bnx2i_hwi.c | 199 ++-
drivers/scsi/bnx2i/bnx2i_init.c | 153 ++-
drivers/scsi/bnx2i/bnx2i_iscsi.c | 38 +-
drivers/scsi/bnx2i/bnx2i_sysfs.c | 2 +-
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c | 4 +-
drivers/scsi/fcoe/fcoe.c | 174 ++-
drivers/scsi/fnic/fnic.h | 2 +-
drivers/scsi/fnic/fnic_main.c | 21 +-
drivers/scsi/fnic/fnic_scsi.c | 2 +-
drivers/scsi/iscsi_boot_sysfs.c | 31 +-
drivers/scsi/iscsi_tcp.c | 61 +-
drivers/scsi/libfc/fc_exch.c | 26 +-
drivers/scsi/libfc/fc_lport.c | 2 +
drivers/scsi/libfc/fc_rport.c | 14 +
drivers/scsi/libiscsi.c | 14 +-
drivers/scsi/libiscsi_tcp.c | 14 +-
drivers/scsi/lpfc/lpfc_debugfs.c | 3 +-
drivers/scsi/mac_scsi.c | 14 +-
drivers/scsi/mpt2sas/mpi/mpi2.h | 12 +-
drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 74 +-
drivers/scsi/mpt2sas/mpi/mpi2_init.h | 6 +-
drivers/scsi/mpt2sas/mpi/mpi2_ioc.h | 4 +-
drivers/scsi/mpt2sas/mpt2sas_base.c | 84 +-
drivers/scsi/mpt2sas/mpt2sas_base.h | 77 +-
drivers/scsi/mpt2sas/mpt2sas_ctl.c | 12 +-
drivers/scsi/mpt2sas/mpt2sas_debug.h | 2 +-
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 279 +++-
drivers/scsi/mpt2sas/mpt2sas_transport.c | 24 +-
drivers/scsi/scsi_devinfo.c | 2 +
drivers/scsi/scsi_lib.c | 2 +
drivers/scsi/ses.c | 6 +-
drivers/scsi/sr.c | 46 +-
drivers/scsi/sr.h | 7 +
drivers/scsi/sun3_NCR5380.c | 98 +-
drivers/scsi/sun3_scsi.c | 11 +-
drivers/scsi/sun3_scsi_vme.c | 11 +-
drivers/target/tcm_fc/tfc_cmd.c | 26 +-
include/linux/iscsi_boot_sysfs.h | 16 +-
include/scsi/iscsi_proto.h | 18 +-
include/scsi/libfc.h | 8 +
include/scsi/libiscsi.h | 2 +-
96 files changed, 13313 insertions(+), 3196 deletions(-)
create mode 100644 drivers/scsi/bfa/bfad_bsg.c
create mode 100644 drivers/scsi/bfa/bfad_bsg.h
delete mode 100644 drivers/scsi/bfa/bfi_cbreg.h
delete mode 100644 drivers/scsi/bfa/bfi_ctreg.h
create mode 100644 drivers/scsi/bfa/bfi_reg.h
James
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-07-28 15:56 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-05-20 10:41 [GIT PULL] First round of SCSI updates for 2.6.39 merge window James Bottomley
2011-05-20 13:01 ` Christoph Hellwig
2011-07-23 17:17 James Bottomley
2011-07-23 17:27 ` Randy Dunlap
2011-07-28 8:49 ` James Bottomley
2011-07-28 15:55 ` Randy Dunlap
2011-07-23 21:49 ` Giridhar Malavali
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.