* USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
[not found] <8150663.20.1306842333642.JavaMail.root@zimbra.overnetdata.com>
@ 2011-05-31 12:07 ` Anthony Wright
2011-05-31 14:54 ` Konrad Rzeszutek Wilk
2011-06-01 8:53 ` Ian Pratt
0 siblings, 2 replies; 21+ messages in thread
From: Anthony Wright @ 2011-05-31 12:07 UTC (permalink / raw)
To: xen-devel
I build Xen 4.1.0 and linux 2.6.38.7 from source to do a DIY system based on Linux From Scratch (LFS).
When I try to read from a USB memory stick (around 64M big), I get corruption on the latest version of Xen.
With Xen 3.x and linux 2.6.18 I can read the memory stick no problems.
If I use the linux 2.6.38.7 kernel without a Xen hypervisor I can read the memory stick without problems.
If I use the same setup, but this time introduce the Xen 4.1.0 hypervisor I get random blocks of sectors on the USB disk returning all zeros. Normally these blocks change each time I reboot, but are fixed once they've been established. On one occasion the blocks changed continuously each time I looked at the disk (I have a big file on the USB disk and I run md5sum before accessing it).
Just to remove other possibilities I've checked the system's RAM and it's fine (I've seen similar problems before with dodgy RAM). If I try to access a hard disk or CDROM, everything is fine.
This could be a problem with the way I've built the kernel or Xen, but it seems to suggest that there's a bug in Xen.
I'm happy to try to isolate the problem further if it can't be reproduced elsewhere. My first suggestion would be to use a known good binary copy of xen 4.1.0 and/or linux 2.6.38.7 if anybody can supply one.
thanks,
Anthony Wright
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-05-31 12:07 ` USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7 Anthony Wright
@ 2011-05-31 14:54 ` Konrad Rzeszutek Wilk
2011-06-01 9:52 ` Anthony Wright
2011-06-01 8:53 ` Ian Pratt
1 sibling, 1 reply; 21+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-05-31 14:54 UTC (permalink / raw)
To: Anthony Wright; +Cc: xen-devel
On Tue, May 31, 2011 at 01:07:49PM +0100, Anthony Wright wrote:
> I build Xen 4.1.0 and linux 2.6.38.7 from source to do a DIY system based on Linux From Scratch (LFS).
Ok.. Had you tried my #devel/next-2.6.38 branch in the past?
>
> When I try to read from a USB memory stick (around 64M big), I get corruption on the latest version of Xen.
So this is from dom0 kernel, right?
>
> With Xen 3.x and linux 2.6.18 I can read the memory stick no problems.
>
> If I use the linux 2.6.38.7 kernel without a Xen hypervisor I can read the memory stick without problems.
>
> If I use the same setup, but this time introduce the Xen 4.1.0 hypervisor I get random blocks of sectors on the USB disk returning all zeros. Normally these blocks change each time I reboot, but are fixed once they've been established. On one occasion the blocks changed continuously each time I looked at the disk (I have a big file on the USB disk and I run md5sum before accessing it).
What is the filesystem on the USB disk?
>
> Just to remove other possibilities I've checked the system's RAM and it's fine (I've seen similar problems before with dodgy RAM). If I try to access a hard disk or CDROM, everything is fine.
>
> This could be a problem with the way I've built the kernel or Xen, but it seems to suggest that there's a bug in Xen.
>
> I'm happy to try to isolate the problem further if it can't be reproduced elsewhere. My first suggestion would be to use a known good binary copy of xen 4.1.0 and/or linux 2.6.38.7 if anybody can supply one.
<sigh>Please provide serial log or dmesg output.
>
> thanks,
>
> Anthony Wright
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* RE: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-05-31 12:07 ` USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7 Anthony Wright
2011-05-31 14:54 ` Konrad Rzeszutek Wilk
@ 2011-06-01 8:53 ` Ian Pratt
1 sibling, 0 replies; 21+ messages in thread
From: Ian Pratt @ 2011-06-01 8:53 UTC (permalink / raw)
To: Anthony Wright, xen-devel; +Cc: Ian Pratt
[-- Attachment #1: Type: text/plain, Size: 1496 bytes --]
> If I use the same setup, but this time introduce the Xen 4.1.0 hypervisor I get
> random blocks of sectors on the USB disk returning all zeros. Normally these
> blocks change each time I reboot, but are fixed once they've been
> established. On one occasion the blocks changed continuously each time I
> looked at the disk (I have a big file on the USB disk and I run md5sum before
> accessing it).
Does the issue go away if you limit the total amount of memory visible to xen to 4GB? (mem=4096M on the xen command line)
If so, I suspect this is a swiotlb or latent UHCI driver issue. The easiest way of working around it is just to ensure all dom0 memory gets allocated below 4GB, but it would be good to investigate properly.
Ian
> Just to remove other possibilities I've checked the system's RAM and it's fine
> (I've seen similar problems before with dodgy RAM). If I try to access a hard
> disk or CDROM, everything is fine.
>
> This could be a problem with the way I've built the kernel or Xen, but it
> seems to suggest that there's a bug in Xen.
>
> I'm happy to try to isolate the problem further if it can't be reproduced
> elsewhere. My first suggestion would be to use a known good binary copy of
> xen 4.1.0 and/or linux 2.6.38.7 if anybody can supply one.
>
> thanks,
>
> Anthony Wright
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-05-31 14:54 ` Konrad Rzeszutek Wilk
@ 2011-06-01 9:52 ` Anthony Wright
2011-06-01 14:23 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 21+ messages in thread
From: Anthony Wright @ 2011-06-01 9:52 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, Ian.Pratt; +Cc: xen-devel
[-- Attachment #1: Type: text/plain, Size: 1506 bytes --]
On 31/05/2011 15:54, Konrad Rzeszutek Wilk wrote:
> Ok.. Had you tried my #devel/next-2.6.38 branch in the past?
Yes I tried one of your devel kernels in the past, but switched back to stock linux when I realised that Dom0 functionality was now in that. I'm willing to give a devel kernel a go if you think it would help.
> So this is from dom0 kernel, right?
The corruption occurs in the Dom0 kernel.
> What is the filesystem on the USB disk?
The filesystem on the USB disk is ext2. It's a slightly funny format because while the memory stick is a 2GB memory stick, it's partitioned and formatted as a 64MB memory stick. I've done an md5sum on the raw /dev/sdX device under a system that works and under a system that's faulty and I get different results, so I suspect the fault's below the file system.
> <sigh>Please provide serial log or dmesg output.
dmesg output is attached, but it doesn't show anything that I can see (I boot off a CD and then mount the USB memory stick - the fsck errors at the end)
On 01/06/2011 09:53, Ian Pratt wrote:
> Does the issue go away if you limit the total amount of memory visible to xen to 4GB? (mem=4096M on the xen command line)
>
> If so, I suspect this is a swiotlb or latent UHCI driver issue. The easiest way of working around it is just to ensure all > dom0 memory gets allocated below 4GB, but it would be good to investigate properly.
Yes! I put mem=4096M on the xen command line as asked and everything starts working as it should yea!
Anthony.
[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 72574 bytes --]
Reserving virtual address space above 0xf5800000
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38.7 (root@linux-krq0) (gcc version 4.4.3 (GCC) ) #1 SMP Fri May 27 00:01:44 GMT 2011
xen_release_chunk: looking at area pfn affee-afff0: 2 pages freed
xen_release_chunk: looking at area pfn b0000-e558e: 218510 pages freed
released 218512 pages of unused memory
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000000009b000 (usable)
Xen: 000000000009b400 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 00000000aff90000 (usable)
Xen: 00000000aff90000 - 00000000aff9e000 (ACPI data)
Xen: 00000000aff9e000 - 00000000affe0000 (ACPI NVS)
Xen: 00000000affe0000 - 00000000affee000 (reserved)
Xen: 00000000afff0000 - 00000000b0000000 (reserved)
Xen: 00000000fec00000 - 00000000fec01000 (reserved)
Xen: 00000000fee00000 - 00000000fef00000 (reserved)
Xen: 00000000fff00000 - 0000000100000000 (reserved)
Xen: 0000000100000000 - 0000000175590000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: System manufacturer System Product Name/M2N68-AM Plus, BIOS 1402 03/22/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x175590 max_arch_pfn = 0x1000000
found SMP MP-table at [c00ff780] ff780
initial memory mapped : 0 - 02697000
init_memory_mapping: 0000000000000000-000000002d1fe000
0000000000 - 002d1fe000 page 4k
kernel direct mapping tables up to 2d1fe000 @ 1fe1000-214e000
RAMDISK: 0214e000 - 02697000
ACPI: RSDP 000fb5d0 00014 (v00 ACPIAM)
ACPI: RSDT aff90000 00038 (v01 032210 RSDT1037 20100322 MSFT 00000097)
ACPI: FACP aff90200 00084 (v02 032210 FACP1037 20100322 MSFT 00000097)
ACPI: DSDT aff90460 07307 (v01 A1270 A1270000 00000000 INTL 20060113)
ACPI: FACS aff9e000 00040
ACPI: APIC aff90390 00090 (v01 032210 APIC1037 20100322 MSFT 00000097)
ACPI: MCFG aff90420 0003C (v01 032210 OEMMCFG 20100322 MSFT 00000097)
ACPI: OEMB aff9e040 00071 (v01 032210 OEMB1037 20100322 MSFT 00000097)
ACPI: HPET aff97770 00038 (v01 032210 OEMHPET0 20100322 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
5251MB HIGHMEM available.
721MB LOWMEM available.
mapped low ram: 0 - 2d1fe000
low ram: 0 - 2d1fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0002d1fe
HighMem 0x0002d1fe -> 0x00175590
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x000aff90
0: 0x00100000 -> 0x00175590
On node 0 totalpages: 1201323
free_area_init_node: node 0, pgdat c1ca4980, node_mem_map ea34d200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3947 pages, LIFO batch:0
Normal zone: 1412 pages used for memmap
Normal zone: 179322 pages, LIFO batch:31
HighMem zone: 10504 pages used for memmap
HighMem zone: 1006106 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 255, address 0xfec00000, GSI 0-255
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 6 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 272
Allocating PCI resources starting at b0000000 (gap: b0000000:4ec00000)
Booting paravirtualized kernel on Xen
Xen version: 4.1.0 (preserve-AD)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @ea2e7000 s33920 r0 d23424 u57344
pcpu-alloc: s33920 r0 d23424 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1189375
Kernel command line: boot_media=cdrom boot_volume="/dev/sr0" boot_volume_id=153262803e4e14b0 boot_mode=setup-automatic
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Placing 64MB software IO TLB between e6222d00 - ea222d00
software IO TLB at phys 0x26222d00 - 0x2a222d00
Initializing HighMem for node 0 (0002d1fe:00175590)
Memory: 2729588k/6116928k available (16834k kernel code, 153080k reserved, 8528k data, 976k init, 2143816k highmem)
virtual kernel memory layout:
fixmap : 0xf566e000 - 0xf57ff000 (1604 kB)
pkmap : 0xf5200000 - 0xf5400000 (2048 kB)
vmalloc : 0xed9fe000 - 0xf51fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xed1fe000 ( 721 MB)
.init : 0xc1cc5000 - 0xc1db9000 ( 976 kB)
.data : 0xc1470aae - 0xc1cc4b00 (8528 kB)
.text : 0xc0400000 - 0xc1470aae (16834 kB)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
NR_IRQS:2304 nr_irqs:1536 16
CPU 0 irqstacks, hard=e5c0c000 soft=e5c0e000
xen: sci override: global_irq=9 trigger=0 polarity=0
xen: registering gsi 9 triggering 0 polarity 0
xen: --> irq=9
xen: acpi sci 9
xen: --> irq=1
xen: --> irq=2
xen: --> irq=3
xen: --> irq=4
xen: --> irq=5
xen: --> irq=6
xen: --> irq=7
xen: --> irq=8
xen_map_pirq_gsi: returning irq 9 for gsi 9
xen: --> irq=9
xen: --> irq=10
xen: --> irq=11
xen: --> irq=12
xen: --> irq=13
xen: --> irq=14
xen: --> irq=15
Console: colour dummy device 80x25
console [tty0] enabled
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
Detected 3013.726 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.45 BogoMIPS (lpj=3013726)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20110112
cpu 0 spinlock event irq 1534
Performance Events: Broken PMU hardware detected, using software events only.
MCE: In-kernel MCE decoding enabled.
CPU 1 irqstacks, hard=e5c92000 soft=e5c94000
installing Xen timer for CPU 1
cpu 1 spinlock event irq 1528
Initializing CPU#1
Brought up 2 CPUs
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 234132.000 MB/sec
xor: using function: pIII_sse (234132.000 MB/sec)
Grant table initialized
Time: 10:19:18 Date: 06/01/11
NET: Registered protocol family 16
node 0 link 0: io port [5000, ffffff]
TOM: 00000000c0000000 aka 3072M
Fam 10h mmconf [e0000000, efffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, fe0bffff] ==> [c0000000, dfffffff] and [f0000000, fe0bffff]
TOM2: 0000000140000000 aka 5120M
bus: [00, 07] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xc0000000-0xdfffffff]
bus: 00 index 3 [mem 0xf0000000-0xffffffff]
bus: 00 index 4 [mem 0x140000000-0xfcffffffff]
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
raid6: int32x1 1335 MB/s
raid6: int32x2 1757 MB/s
raid6: int32x4 1187 MB/s
raid6: int32x8 832 MB/s
raid6: mmxx1 4062 MB/s
raid6: mmxx2 4894 MB/s
raid6: sse1x1 2218 MB/s
raid6: sse1x2 3050 MB/s
raid6: sse2x1 3785 MB/s
raid6: sse2x2 5261 MB/s
raid6: using algorithm sse2x2 (5261 MB/s)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfed44fff]
pci 0000:00:00.0: [10de:03e2] type 0 class 0x000500
pci 0000:00:01.0: [10de:03e1] type 0 class 0x000601
pci 0000:00:01.0: reg 10: [io 0x0900-0x09ff]
pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05
pci 0000:00:01.1: reg 10: [io 0x0e00-0x0e3f]
pci 0000:00:01.1: reg 20: [io 0x0600-0x063f]
pci 0000:00:01.1: reg 24: [io 0x0700-0x073f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500
pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03
pci 0000:00:02.0: reg 10: [mem 0xdfffb000-0xdfffbfff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03
pci 0000:00:02.1: reg 10: [mem 0xdfffac00-0xdfffacff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604
pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403
pci 0000:00:05.0: reg 10: [mem 0xdfff4000-0xdfff7fff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101
pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf]
pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680
pci 0000:00:07.0: reg 10: [mem 0xdfff9000-0xdfff9fff]
pci 0000:00:07.0: reg 14: [io 0xe480-0xe487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101
pci 0000:00:08.0: reg 10: [io 0xe400-0xe407]
pci 0000:00:08.0: reg 14: [io 0xe080-0xe083]
pci 0000:00:08.0: reg 18: [io 0xe000-0xe007]
pci 0000:00:08.0: reg 1c: [io 0xdc00-0xdc03]
pci 0000:00:08.0: reg 20: [io 0xd880-0xd88f]
pci 0000:00:08.0: reg 24: [mem 0xdfff8000-0xdfff8fff]
pci 0000:00:08.1: [10de:03f6] type 0 class 0x000101
pci 0000:00:08.1: reg 10: [io 0xd800-0xd807]
pci 0000:00:08.1: reg 14: [io 0xd480-0xd483]
pci 0000:00:08.1: reg 18: [io 0xd400-0xd407]
pci 0000:00:08.1: reg 1c: [io 0xd080-0xd083]
pci 0000:00:08.1: reg 20: [io 0xd000-0xd00f]
pci 0000:00:08.1: reg 24: [mem 0xdffef000-0xdffeffff]
pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: [10de:03e9] type 1 class 0x000604
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: [10de:03d6] type 0 class 0x000300
pci 0000:00:0d.0: reg 10: [mem 0xde000000-0xdeffffff]
pci 0000:00:0d.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:0d.0: reg 1c: [mem 0xdd000000-0xddffffff 64bit]
pci 0000:00:0d.0: reg 30: [mem 0xdffc0000-0xdffdffff pref]
pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xb0000000-0xdfffffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xfed44fff] (subtractive decode)
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
xen_balloon: Initialising balloon driver.
last_pfn = 0x175590 max_arch_pfn = 0x1000000
vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
Advanced Linux Sound Architecture Driver Version 1.0.23.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009b000 - 000000000009ffff
reserve RAM buffer: 00000000aff90000 - 00000000afffffff
reserve RAM buffer: 0000000175590000 - 0000000177ffffff
Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
NET: Registered protocol family 23
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
NET: Registered protocol family 8
NET: Registered protocol family 20
cfg80211: Calling CRDA to update world regulatory domain
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource xen
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xb0000000-0xdfffffff window]
Switched to NOHz mode on CPU #1
pnp 00:00: [mem 0xf0000000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io 0x0000-0x000f]
pnp 00:01: [io 0x0081-0x0083]
pnp 00:01: [io 0x0087]
pnp 00:01: [io 0x0089-0x008b]
pnp 00:01: [io 0x008f]
pnp 00:01: [io 0x00c0-0x00df]
Switched to NOHz mode on CPU #0
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x0070-0x0071]
xen: registering gsi 8 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 8 for gsi 8
xen: --> irq=8
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io 0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io 0x00f0-0x00ff]
xen: registering gsi 13 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 13 for gsi 13
xen: --> irq=13
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io 0x0378-0x037f]
xen: registering gsi 7 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 7 for gsi 7
xen: --> irq=7
pnp 00:05: [irq 7]
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:06: [mem 0x000d0000-0x000d3fff window]
pnp 00:06: [mem 0x000d4000-0x000d7fff window]
pnp 00:06: [mem 0x000de000-0x000dffff window]
pnp 00:06: [io 0x0010-0x001f]
pnp 00:06: [io 0x0022-0x003f]
pnp 00:06: [io 0x0044-0x004d]
pnp 00:06: [io 0x0050-0x005f]
pnp 00:06: [io 0x0062-0x0063]
pnp 00:06: [io 0x0065-0x006f]
pnp 00:06: [io 0x0072-0x007f]
pnp 00:06: [io 0x0080]
pnp 00:06: [io 0x0084-0x0086]
pnp 00:06: [io 0x0088]
pnp 00:06: [io 0x008c-0x008e]
pnp 00:06: [io 0x0090-0x009f]
pnp 00:06: [io 0x00a2-0x00bf]
pnp 00:06: [io 0x00e0-0x00ef]
pnp 00:06: [io 0x04d0-0x04d1]
pnp 00:06: [io 0x0800-0x080f]
pnp 00:06: [io 0x0500-0x057f]
pnp 00:06: [io 0x0580-0x05ff]
pnp 00:06: [io 0x0800-0x087f]
pnp 00:06: [io 0x0880-0x08ff]
pnp 00:06: [io 0x0d00-0x0d7f]
pnp 00:06: [io 0x0d80-0x0dff]
pnp 00:06: [io 0x0900-0x097f]
pnp 00:06: [io 0x0980-0x09ff]
pnp 00:06: [io 0x1100-0x117f]
pnp 00:06: [io 0x1180-0x11ff]
pnp 00:06: [mem 0xfec80000-0x1fd93ffff]
pnp 00:06: [mem 0xfefe0000-0xfefe01ff]
pnp 00:06: [mem 0xfefe1000-0xfefe1fff]
pnp 00:06: [mem 0xfee01000-0xfeefffff]
pnp 00:06: disabling [io 0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
pnp 00:06: disabling [io 0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0800-0x080f] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [io 0x0580-0x05ff] has been reserved
system 00:06: [io 0x0800-0x087f] could not be reserved
system 00:06: [io 0x0880-0x08ff] has been reserved
system 00:06: [io 0x0d00-0x0d7f] has been reserved
system 00:06: [io 0x0d80-0x0dff] has been reserved
system 00:06: [io 0x1100-0x117f] has been reserved
system 00:06: [io 0x1180-0x11ff] has been reserved
system 00:06: [mem 0x000d0000-0x000d3fff window] could not be reserved
system 00:06: [mem 0x000d4000-0x000d7fff window] could not be reserved
system 00:06: [mem 0x000de000-0x000dffff window] could not be reserved
system 00:06: [mem 0xfec80000-0x1fd93ffff] could not be reserved
system 00:06: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:06: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [mem 0xfed00000-0xfed00fff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: [mem 0xfec00000-0xfec00fff]
pnp 00:08: [mem 0xfee00000-0xfee00fff]
pnp 00:08: [mem 0xb0000000-0xbfffffff]
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: [mem 0xb0000000-0xbfffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
xen: registering gsi 1 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 1 for gsi 1
xen: --> irq=1
pnp 00:09: [irq 1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0a: [io 0x0230-0x023f]
pnp 00:0a: [io 0x0290-0x029f]
pnp 00:0a: [io 0x0a00-0x0a0f]
pnp 00:0a: [io 0x0a10-0x0a1f]
system 00:0a: [io 0x0230-0x023f] has been reserved
system 00:0a: [io 0x0290-0x029f] has been reserved
system 00:0a: [io 0x0a00-0x0a0f] has been reserved
system 00:0a: [io 0x0a10-0x0a1f] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x03f8-0x03ff]
xen: registering gsi 4 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 4 for gsi 4
xen: --> irq=4
pnp 00:0b: [irq 4]
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [mem 0xe0000000-0xefffffff]
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x000c0000-0x000cffff]
pnp 00:0d: [mem 0x000e0000-0x000fffff]
pnp 00:0d: [mem 0x00100000-0xafffffff]
pnp 00:0d: [mem 0xfed45000-0xffffffff]
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0xafffffff] could not be reserved
system 00:0d: [mem 0xfed45000-0xffffffff] could not be reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PM-Timer failed consistency check (0x0xffffff) - aborting.
pci 0000:00:04.0: PCI bridge to [bus 01-01]
pci 0000:00:04.0: bridge window [io disabled]
pci 0000:00:04.0: bridge window [mem disabled]
pci 0000:00:04.0: bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io disabled]
pci 0000:00:09.0: bridge window [mem disabled]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0: bridge window [io disabled]
pci 0000:00:0b.0: bridge window [mem disabled]
pci 0000:00:0b.0: bridge window [mem pref disabled]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0: bridge window [io disabled]
pci 0000:00:0c.0: bridge window [mem disabled]
pci 0000:00:0c.0: bridge window [mem pref disabled]
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xb0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed44fff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xb0000000-0xdfffffff]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed44fff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5412k freed
kvm: no hardware support
has_svm: svm not available
kvm: no hardware support
apm: BIOS not found.
microcode: no support for this CPU vendor
audit: initializing netlink socket (disabled)
type=2000 audit(1306923560.194:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
DLM (built May 26 2011 23:19:13) installed
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
EFS: 1.0a - http://aeschi.ch.eu.org/efs/
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
QNX4 filesystem 0.2.3 registered.
fuse init (API version 7.16)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
BeFS version: 0.9.3
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
ocfs2: Registered cluster interface user
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
GFS2 (built May 26 2011 23:20:19) installed
msgmni has been set to 4909
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:09.0: setting latency timer to 64
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0c.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
ALI M7101 PMU not found.
ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 23
xen: registering gsi 23 triggering 0 polarity 1
xen: --> irq=23
nvidiafb 0000:00:0d.0: PCI INT A -> Link[LMC9] -> GSI 23 (level, low) -> IRQ 23
nvidiafb: Device ID: 10de03d6
nvidiafb: CRTC0 analog found
nvidiafb: CRTC1 analog not found
i2c i2c-0: unable to read EDID block.
i2c i2c-0: unable to read EDID block.
i2c i2c-0: unable to read EDID block.
nvidiafb: EDID found from BUS2
nvidiafb: CRTC 0 appears to have a CRT attached
nvidiafb: Using CRT on CRTC 0
nvidiafb: unable to setup MTRR
fbcon: NV3d (fb0) is primary device
Console: switching to colour frame buffer device 160x64
nvidiafb: PCI nVidia NV3d framebuffer (64MB @ 0xC0000000)
VIA Graphics Intergration Chipset framebuffer 2.4 initializing
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Event-channel device installed.
HDLC line discipline maxframe=4096
N_HDLC line discipline registered.
r3964: Philips r3964 Driver $Revision: 1.10 $
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RocketPort device driver module, version 2.09, 12-June-2003
No rocketport ports found; unloading driver
Cyclades driver 2.6 (built May 26 2011 23:28:51)
Initializing Nozomi driver 2.1d (build date: May 26 2011 23:28:53)
SyncLink serial driver $Revision: 4.38 $
SyncLink serial driver $Revision: 4.38 $, tty major#250
SyncLink MultiPort driver $Revision: 4.38 $
SyncLink MultiPort driver $Revision: 4.38 $, tty major#249
SyncLink GT
SyncLink GT, tty major#248
SyncLink GT no devices found
lp: driver loaded but no devices found
DoubleTalk PC - not found
sonypi: Sony Programmable I/O Controller Driver v1.26.
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.3
toshiba: not a supported Toshiba laptop
ppdev: user-space parallel port driver
platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
platform pc8736x_gpio.0: no device found
nsc_gpio initializing
telclk_interrup = 0xf non-mcpbl0010 hw.
smapi::smapi_init, ERROR invalid usSmapiID
mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
mwave: mwavedd::mwave_init: Error: Failed to initialize board data
mwave: mwavedd::mwave_init: Error: Failed to initialize
Linux agpgart interface v0.103
ipmi message handler version 39.2
ipmi device interface
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
IPMI Watchdog: driver initialized
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to userspace modesetting.
[drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
lp0: console ready
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
MM: desc_per_page = 128
nbd: registered device at major 43
ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
i2c-core: driver [tsl2550] using legacy suspend method
i2c-core: driver [tsl2550] using legacy resume method
Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
c2port c2port0: C2 port uc added
c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
Loading iSCSI transport class v2.0-870.
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
iscsi: registered transport (tcp)
Adaptec aacraid driver 1.1-5[26400]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
QLogic Fibre Channel HBA Driver: 8.03.05-k0
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.20
Copyright(c) 2004-2009 Emulex. All rights reserved.
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.05.29-rc1 Tue. Dec. 7 17:00:00 PDT 2010
mpt2sas version 07.100.00.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
ppa: Version 2.07 (for Linux 2.4.x)
imm: Version 2.05 (for Linux 2.4.0)
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
st: Version 20101219, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
SCSI Media Changer driver v0.25
osd: LOADED open-osd 0.2.0
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
xen: registering gsi 22 triggering 0 polarity 1
xen: --> irq=22
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:08.0: BMDMA: failed to set dma mask, falling back to PIO
sata_nv 0000:00:08.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max PIO4 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 22
ata2: SATA max PIO4 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 22
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 21
xen: registering gsi 21 triggering 0 polarity 1
xen: --> irq=21
sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:08.1: BMDMA: failed to set dma mask, falling back to PIO
sata_nv 0000:00:08.1: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max PIO4 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 21
ata4: SATA max PIO4 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 21
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: BMDMA: failed to set dma mask, falling back to PIO
pata_amd 0000:00:06.0: setting latency timer to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata6: PATA max PIO4 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
SSFDC read-only Flash Translation layer
mtdoops: mtd device (mtddev=name/number) must be supplied
device id = 2440
device id = 2480
device id = 24c0
device id = 24d0
device id = 25a1
device id = 2670
Could not find PAR responsible for SC520CDP Flash Bank #0
Trying default address 0x8400000
Could not find PAR responsible for SC520CDP Flash Bank #1
Trying default address 0x8c00000
Could not find PAR responsible for SC520CDP DIL Flash
Trying default address 0x9400000
SC520 CDP flash device: 0x800000 at 0x8400000
Failed to ioremap_nocache
NetSc520 flash device: 0x100000 at 0x200000
Failed to ioremap_nocache
Failed to ioremap_nocache
Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.
pmc551: not detected
ftl_cs: FTL header not found.
No valid DiskOnChip devices found
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit)
flash size: 128 MiB
page size: 512 bytes
OOB area size: 16 bytes
sector size: 16 KiB
pages number: 262144
pages per sector: 32
bus width: 8
bits in sector size: 14
bits in page size: 9
bits in OOB size: 4
flash size with OOB: 135168 KiB
page address bytes: 4
sector address bytes: 3
options: 0x62
Scanning device for bad blocks
Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit":
0x000000000000-0x000008000000 : "NAND simulator partition 0"
ftl_cs: FTL header not found.
usbcore: registered new interface driver alauda
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
Copyright (c) 2007-2009 Intel Corporation.
Intel(R) Virtual Function Network Driver - version 1.0.8-k0
Copyright (c) 2009 - 2010 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.2.9-k2
ixgbe: Copyright (c) 1999-2010 Intel Corporation.
ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
ixgb: Copyright (c) 1999-2008 Intel Corporation.
vcan: Virtual CAN interface driver
CAN device driver interface
ata5.01: ATAPI: ASUS DVD-ROM DVD-E616P 0104, E1.04, max UDMA/66
ata5: nv_mode_filter: 0x1f&0x1f39f->0x1f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (900:30:0x14)
sja1000 CAN netdevice driver
bonding: Ethernet Channel Bonding Driver: v3.7.0 (June 2, 2010)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
ata5.01: configured for PIO4
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
tehuti: Tehuti Networks(R) Network Driver, 7.29.3
tehuti: Options: hw_csum
enic: Cisco VIC Ethernet NIC Driver, ver 1.4.1.10
jme: JMicron JMC2XX ethernet driver version 1.0.7
NET3 PLIP version 2.4-parport gniibe@mri.co.jp
plip0: Parallel port at 0x378, using IRQ 7.
pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ThunderLAN driver v1.15a
TLAN: 0 devices installed, PCI: 0 EISA: 0
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.12 (Jan 03, 2011)
Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.62.00-6 (2011/01/30)
sky2: driver version 1.28
D-Link DE-620 pocket adapter io 0x378, which is busy.
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
xen: registering gsi 20 triggering 0 polarity 1
xen: --> irq=20
forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
forcedeth 0000:00:07.0: setting latency timer to 64
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 3, addr 90:e6:ba:6b:a2:0e
forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
DE600: port 0x378 busy
ata1: SATA link down (SStatus 0 SControl 300)
atp.c:v1.09=ac 2002/10/01 Donald Becker <becker@scyld.com>
Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
vxge: Copyright(c) 2002-2010 Exar Corp.
vxge: Driver version: 2.5.1.22082-k
myri10ge: Version 1.5.2-1.459
ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
usbcore: registered new interface driver catc
catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
usbcore: registered new interface driver kaweth
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
usbcore: registered new interface driver rtl8150
hso: drivers/net/usb/hso.c: Option Wireless
usbcore: registered new interface driver hso
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver cdc_eem
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver smsc95xx
usbcore: registered new interface driver gl620a
usbcore: registered new interface driver net1080
usbcore: registered new interface driver plusb
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
usbcore: registered new interface driver int51x1
cdc_ncm: 7-Feb-2011
usbcore: registered new interface driver cdc_ncm
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
libipw: 802.11 data/management/control stack, git-1.1.13
libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
orinoco_plx 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au>, Daniel Barlow <dan@telent.net>)
orinoco_tmd 0.15 (Joerg Dorchain <joerg@dorchain.net>)
orinoco_nortel 0.15 (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)
airo(): Probing for PCI adapters
airo(): Finished probing for PCI adapters
Atmel at76x USB Wireless LAN Driver 0.17 loading
usbcore: registered new interface driver at76c50x-usb
Loaded prism54 driver, version 1.2
Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
usbcore: registered new interface driver zd1211rw
usbcore: registered new interface driver rtl8187
usbcore: registered new interface driver rndis_wlan
usbcore: registered new interface driver zd1201
usbcore: registered new interface driver usb8xxx
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
usbcore: registered new interface driver lbtf_usb
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
iwl3945: Copyright(c) 2003-2010 Intel Corporation
usbcore: registered new interface driver rt2500usb
usbcore: registered new interface driver rt73usb
usbcore: registered new interface driver rt2800usb
usbcore: registered new interface driver p54usb
usbcore: registered new interface driver ar9170usb
mac80211_hwsim: Initializing radio 0
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: hwaddr 020000000000 registered
mac80211_hwsim: Initializing radio 1
ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy1: hwaddr 020000000100 registered
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
AX.25: Z8530 SCC driver version 3.0.dl1bke
mkiss: AX.25 Multikiss, Hans Albas PE1AYX
AX.25: 6pack driver, Revision: 0.3.0
YAM driver version 0.8 by F1OAT/F6FBB
AX.25: bpqether driver version 004
baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
baycom_ser_fdx: version 0.10 compiled 23:35:27 May 26 2011
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
hdlcdrv: version 0.8 compiled 23:35:27 May 26 2011
baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
baycom_ser_hdx: version 0.10 compiled 23:35:28 May 26 2011
baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
baycom_par: version 0.9 compiled 23:35:28 May 26 2011
baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA
baycom_epp: version 0.7 compiled 23:35:29 May 26 2011
usbcore: registered new interface driver irda-usb
USB IrDA support registered
ata3.00: ATA-8: SAMSUNG HD503HI, 1AJ10001, max UDMA/133
usbcore: registered new interface driver stir4200
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
usbcore: registered new interface driver mcs7780
usbcore: registered new interface driver kingsun-sir
usbcore: registered new interface driver ksdazzle-sir
usbcore: registered new interface driver ks959-sir
console [netcon0] enabled
netconsole: network logging started
QLogic/NetXen Network Driver v4.0.75
Madge ATM Ambassador driver version 1.2.4
Madge ATM Horizon [Ultra] driver version 1.2.1
fore200e: FORE Systems 200E-series ATM driver - version 0.3e
idt77252_init: at c1d12a2e
I2O subsystem v1.325
i2o: max drivers = 8
ata3.00: configured for PIO4
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.18
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.18
Fusion MPT FC Host driver 3.04.18
Fusion MPT SAS Host driver 3.04.18
Fusion MPT misc device (ioctl) driver 3.04.18
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.18
parport0: cannot grant exclusive access for device ks0108
ks0108: ERROR: parport didn't register new device
cfag12864b: ERROR: ks0108 is not initialized
cfag12864bfb: ERROR: cfag12864b is not initialized
Intel ISA PCIC probe: not found.
aoe: AoE v47 initialised.
paride: aten registered as protocol 0
paride: bpck registered as protocol 1
paride: comm registered as protocol 2
paride: dstr registered as protocol 3
paride: k951 registered as protocol 4
paride: k971 registered as protocol 5
paride: epat registered as protocol 6
paride: epia registered as protocol 7
paride: frpw registered as protocol 8
paride: friq registered as protocol 9
paride: fit2 registered as protocol 10
paride: fit3 registered as protocol 11
paride: on20 registered as protocol 12
paride: on26 registered as protocol 13
paride: ktti registered as protocol 14
bpck6: BACKPACK Protocol Driver V2.0.2
bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL. USA
paride: bpck6 registered as protocol 15
pd: pd version 1.05, major 45, cluster 64, nice 0
ata2: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD503HI 1AJ1 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: SAMSUNG HD503HI, 1AJ10001, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for PIO4
scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD503HI 1AJ1 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: Attached scsi generic sg1 type 0
scsi 4:0:1:0: CD-ROM ASUS DVD-E616P 1.04 PQ: 0 ANSI: 5
sdb: sdb1 sdb2
sd 3:0:0:0: [sdb] Attached SCSI disk
sr0: scsi3-mmc drive: 30x/48x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:1:0: Attached scsi CD-ROM sr0
sr 4:0:1:0: Attached scsi generic sg2 type 5
ata6: port disabled. ignoring.
pda: Autoprobe failed
pd: no valid drive found
pcd: pcd version 1.07, major 46, nice 0
pcd0: Autoprobe failed
pcd: No CD-ROM drive found
pf: pf version 1.04, major 47, cluster 64, nice 0
pf: No ATAPI disk detected
pt: pt version 1.04, major 96
pt0: Autoprobe failed
pt: No ATAPI tape drive detected
pg: pg version 1.02, major 97
pga: Autoprobe failed
pg: No ATAPI device detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
xen: registering gsi 23 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 23 for gsi 23
xen: --> irq=23
Already setup the GSI :23
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 23, io mem 0xdfffac00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.7 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
xen: registering gsi 22 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 22 for gsi 22
xen: --> irq=22
Already setup the GSI :22
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xdfffb000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.7 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
sl811: driver sl811-hcd, 19 May 2005
driver u132_hcd built at 23:46:02 on May 26 2011
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usbtmc
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
usbcore: registered new interface driver mdc800
mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
usbcore: registered new interface driver microtekX6
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for aircable
usbcore: registered new interface driver aircable
USB Serial support registered for ark3116
usbcore: registered new interface driver ark3116
ark3116:v0.6:USB ARK3116 serial/IrDA driver
USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
usbcore: registered new interface driver belkin
belkin_sa: v1.3:USB Belkin Serial converter driver
USB Serial support registered for ch341-uart
usbcore: registered new interface driver ch341
USB Serial support registered for cp210x
usbcore: registered new interface driver cp210x
cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
USB Serial support registered for Reiner SCT Cyberjack USB card reader
usbcore: registered new interface driver cyberjack
cyberjack: v1.01 Matthias Bruestle
cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
USB Serial support registered for DeLorme Earthmate USB
USB Serial support registered for HID->COM RS232 Adapter
USB Serial support registered for Nokia CA-42 V2 Adapter
usbcore: registered new interface driver cypress
cypress_m8: v1.10:Cypress USB to Serial Driver
USB Serial support registered for debug
usbcore: registered new interface driver debug
USB Serial support registered for Digi 2 port USB adapter
USB Serial support registered for Digi 4 port USB adapter
usbcore: registered new interface driver digi_acceleport
digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver
USB Serial support registered for Edgeport 2 port adapter
USB Serial support registered for Edgeport 4 port adapter
USB Serial support registered for Edgeport 8 port adapter
USB Serial support registered for EPiC device
usbcore: registered new interface driver io_edgeport
io_edgeport: v2.7:Edgeport USB Serial Driver
USB Serial support registered for Edgeport TI 1 port adapter
USB Serial support registered for Edgeport TI 2 port adapter
usbcore: registered new interface driver io_ti
io_ti: v0.7mode043006:Edgeport USB Serial Driver
USB Serial support registered for empeg
usbcore: registered new interface driver empeg
empeg: v1.3:USB Empeg Mark I/II Driver
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
USB Serial support registered for funsoft
usbcore: registered new interface driver funsoft
USB Serial support registered for hp4X
usbcore: registered new interface driver hp4X
hp4x: v1.00:HP4x (48/49) Generic Serial driver
USB Serial support registered for PocketPC PDA
usbcore: registered new interface driver ipaq
ipaq: v1.0:USB PocketPC PDA driver
USB Serial support registered for IPWireless converter
usbcore: registered new interface driver ipwtty
ipw: v0.4:IPWireless tty driver
USB Serial support registered for IR Dongle
usbcore: registered new interface driver ir-usb
ir_usb: v0.5:USB IR Dongle driver
USB Serial support registered for iuu_phoenix
usbcore: registered new interface driver iuu_phoenix
iuu_phoenix: v0.12:Infinity USB Unlimited Phoenix driver
USB Serial support registered for Keyspan - (without firmware)
USB Serial support registered for Keyspan 1 port adapter
USB Serial support registered for Keyspan 2 port adapter
USB Serial support registered for Keyspan 4 port adapter
usbcore: registered new interface driver keyspan
keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
USB Serial support registered for Keyspan PDA
USB Serial support registered for Keyspan PDA - (prerenumeration)
USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
usbcore: registered new interface driver keyspan_pda
keyspan_pda: v1.1:USB Keyspan PDA Converter driver
USB Serial support registered for KL5KUSB105D / PalmConnect
usbcore: registered new interface driver kl5kusb105d
kl5kusb105: v0.4:KLSI KL5KUSB105 chipset USB->Serial Converter driver
USB Serial support registered for KOBIL USB smart card terminal
usbcore: registered new interface driver kobil
kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
USB Serial support registered for MCT U232
usbcore: registered new interface driver mct_u232
mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
USB Serial support registered for Moschip 2 port adapter
mos7720: 2.1:Moschip USB Serial Driver
usbcore: registered new interface driver moschip7720
USB Serial support registered for Moschip 7840/7820 USB Serial Driver
mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver
usbcore: registered new interface driver mos7840
USB Serial support registered for moto-modem
usbcore: registered new interface driver moto-modem
USB Serial support registered for navman
usbcore: registered new interface driver navman
USB Serial support registered for ZyXEL - omni.net lcd plus usb
usbcore: registered new interface driver omninet
omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
USB Serial support registered for GSM modem (1-port)
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: New USB device found, idVendor=0951, idProduct=1624
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: DataTraveler G2
usb 1-5: Manufacturer: Kingston
usb 1-5: SerialNumber: 001CC0EC34D2AA41269609B6
scsi6 : usb-storage 1-5:1.0
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for oti6858
usbcore: registered new interface driver oti6858
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
USB Serial support registered for Qualcomm USB modem
usbcore: registered new interface driver qcserial
safe_serial: v0.1:USB Safe Encapsulated Serial
USB Serial support registered for safe_serial
usbcore: registered new interface driver safe_serial
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
USB Serial support registered for SPCP8x5
usbcore: registered new interface driver spcp8x5
spcp8x5: v0.10:SPCP8x5 USB to serial adaptor driver
USB Serial support registered for symbol
usbcore: registered new interface driver symbol
USB Serial support registered for TI USB 3410 1 port adapter
USB Serial support registered for TI USB 5052 2 port adapter
usbcore: registered new interface driver ti_usb_3410_5052
ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
USB Serial support registered for Handspring Visor / Palm OS
USB Serial support registered for Sony Clie 3.5
USB Serial support registered for Sony Clie 5.0
usbcore: registered new interface driver visor
visor: USB HandSpring Visor / Palm OS driver
USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
USB Serial support registered for Connect Tech - WhiteHEAT
usbcore: registered new interface driver whiteheat
whiteheat: v2.0:USB ConnectTech WhiteHEAT driver
usbcore: registered new interface driver adutux
adutux adutux (see www.ontrak.net) v0.0.13
adutux is an experimental driver. Use at your own risk
usbcore: registered new interface driver appledisplay
usbcore: registered new interface driver emi26 - firmware loader
usbcore: registered new interface driver emi62 - firmware loader
driver ftdi-elan built at 23:46:06 on May 26 2011
usbcore: registered new interface driver ftdi-elan
idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver
usbcore: registered new interface driver idmouse
usbcore: registered new interface driver iowarrior
usbcore: registered new interface driver isight_firmware
usbcore: registered new interface driver usblcd
usbcore: registered new interface driver ldusb
usbcore: registered new interface driver usbled
usbcore: registered new interface driver legousbtower
legousbtower: v0.96:LEGO USB Tower Driver
usbcore: registered new interface driver trancevibrator
trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver
usbcore: registered new interface driver uss720
uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
uss720: NOTE: this is a special purpose driver to allow nonstandard
uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
uss720: If you just want to connect to a printer, use usblp instead
usbcore: registered new interface driver usbsevseg
usbcore: registered new interface driver sisusb
usbcore: registered new interface driver cxacru
usbcore: registered new interface driver speedtch
[ueagle-atm] driver ueagle 1.4 loaded
usbcore: registered new interface driver ueagle-atm
xusbatm: malformed module parameters
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver bcm5974
i2c-core: driver [synaptics_i2c] using legacy suspend method
i2c-core: driver [synaptics_i2c] using legacy resume method
apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
usbcore: registered new interface driver ati_remote
ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
usbcore: registered new interface driver ati_remote2
ati_remote2: ATI/Philips USB RF remote driver 0.3
cm109: Keymap for Komunikate KIP1000 phone loaded
usbcore: registered new interface driver cm109
cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
usbcore: registered new interface driver keyspan_remote
input: PC Speaker as /devices/platform/pcspkr/input/input2
usbcore: registered new interface driver powermate
wistron_btns: System unknown
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
usbcore: registered new interface driver yealink
yealink: yld-20051230:Yealink phone driver
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
i2c-core: driver [rtc-ds1374] using legacy suspend method
i2c-core: driver [rtc-ds1374] using legacy resume method
i2c /dev entries driver
i2c i2c-3: nForce2 SMBus adapter at 0x600
i2c i2c-4: nForce2 SMBus adapter at 0x700
i2c-parport: adapter type unspecified
i2c-parport-light: adapter type unspecified
usbcore: registered new interface driver i2c-tiny-usb
isa i2c-pca-isa.0: Please specify I/O base
applesmc: supported laptop not found!
applesmc: driver init failed (ret=-19)!
it87: Found IT8712F chip at 0x290, revision 8
it87: VID is disabled (pins used for GPIO)
ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region ECRE [io 0x290-0x2af]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
hp_accel: driver loaded
scsi 6:0:0:0: Direct-Access Kingston DataTraveler G2 8.20 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdc] 3870720 512-byte logical blocks: (1.98 GB/1.84 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Attached SCSI removable disk
pc87360: PC8736x not detected, module not inserted
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.2.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath queue-length: version 0.1.0 loaded
device-mapper: multipath service-time: version 0.2.0 loaded
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: Broadcom Blutonium firmware driver ver 1.2
usbcore: registered new interface driver bcm203x
Bluetooth: Digianswer Bluetooth USB driver ver 0.10
usbcore: registered new interface driver bpa10x
Bluetooth: BlueFRITZ! USB driver ver 1.2
usbcore: registered new interface driver bfusb
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
EDAC MC: Ver: 2.1.0 May 26 2011
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
i2c-core: driver [BD2802] using legacy suspend method
i2c-core: driver [BD2802] using legacy resume method
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
No iBFT detected.
HIFN supports only 32-bit addresses.
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
msi-laptop: driver 0.5 successfully loaded.
compal-laptop: Motherboard not recognized (You could try the module's force-parameter)
dell-wmi: No known WMI GUID found
acer-wmi: Acer Laptop ACPI-WMI Extras
acer-wmi: No or unsupported WMI interface, unable to load
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
fujitsu-laptop: driver 0.6.0 successfully loaded.
no UART detected at 0x1
snd_portman2x4: probe of snd_portman2x4.0 failed with error -5
Error: Driver 'pcspkr' is already registered, aborting...
isa adlib.0: please specify port
sc6000: specify IO port
Error: Driver 'msnd_pinnacle' is already registered, aborting...
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
xen: registering gsi 21 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 21 for gsi 21
xen: --> irq=21
Already setup the GSI :21
HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:05.0: setting latency timer to 64
ALSA sound/pci/hda/patch_realtek.c:1528: SKU: Nid=0x1d sku_cfg=0x4005c603
ALSA sound/pci/hda/patch_realtek.c:1530: SKU: port_connectivity=0x1
ALSA sound/pci/hda/patch_realtek.c:1531: SKU: enable_pcbeep=0x0
ALSA sound/pci/hda/patch_realtek.c:1532: SKU: check_sum=0x00000005
ALSA sound/pci/hda/patch_realtek.c:1533: SKU: customization=0x000000c6
ALSA sound/pci/hda/patch_realtek.c:1534: SKU: external_amp=0x0
ALSA sound/pci/hda/patch_realtek.c:1535: SKU: platform_type=0x0
ALSA sound/pci/hda/patch_realtek.c:1536: SKU: swap=0x1
ALSA sound/pci/hda/patch_realtek.c:1537: SKU: override=0x1
usbcore: registered new interface driver snd-usb-audio
usbcore: registered new interface driver snd-usb-usx2y
usbcore: registered new interface driver snd-usb-us122l
usbcore: registered new interface driver snd-usb-caiaq
ALSA device list:
#0: Dummy 1
#1: Virtual MIDI Card 1
#2: HDA NVidia at 0xdfff4000 irq 21
pktgen: Packet Generator for packet performance testing. Version: 2.74
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.2
u32 classifier
Performance counters on
input device check on
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
IPVS: Registered protocols (TCP, UDP, AH, ESP)
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: ipvs loaded.
IPVS: [rr] scheduler registered.
IPVS: [wrr] scheduler registered.
IPVS: [lc] scheduler registered.
IPVS: [wlc] scheduler registered.
IPVS: [lblc] scheduler registered.
IPVS: [lblcr] scheduler registered.
IPVS: [dh] scheduler registered.
IPVS: [sh] scheduler registered.
IPVS: [sed] scheduler registered.
IPVS: [nq] scheduler registered.
IPVS: ftp: loaded support on port[0] = 21
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP veno registered
TCP scalable registered
TCP lp registered
TCP yeah registered
TCP illinois registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
NET: Registered protocol family 4
NET: Registered protocol family 5
NET: Registered protocol family 6
NET: Registered protocol family 11
NET: Registered protocol family 3
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
can: raw protocol (rev 20090105)
can: broadcast manager protocol (rev 20090105 t)
IrCOMM protocol (Dag Brattli)
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lec:lane_module_init: lec.c: May 26 2011 23:52:05 initialized
NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
DECnet: Routing cache hash table of 1024 buckets, 8Kbytes
NET: Registered protocol family 12
NET: Registered protocol family 35
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
CCID: Activated CCID 2 (TCP-like)
CCID: Activated CCID 3 (TCP-Friendly Rate Control)
DCCP watch registered (port=0)
sctp: Hash tables configured (established 65536 bind 65536)
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
lib80211_crypt: registered algorithm 'WEP'
lib80211_crypt: registered algorithm 'CCMP'
lib80211_crypt: registered algorithm 'TKIP'
TIPC: Activated (version 2.0.0 compiled May 26 2011 23:59:57)
NET: Registered protocol family 30
TIPC: Started in single node mode
NET: Registered protocol family 36
Registering the dns_resolver key type
powernow-k8: Found 1 AMD Athlon(tm) II X2 250 Processor (2 cpu cores) (version 2.20.00)
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 15:403:324
pci_express 0000:00:09.0:pcie08: hash matches
tty tty49: hash matches
acpi PNP0B00:00: hash matches
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 976k freed
Write protecting the kernel text: 16836k
Write protecting the kernel read-only data: 7060k
NX-protecting the kernel data: 9788k
udevd (4713): /proc/4713/oom_adj is deprecated, please use /proc/4713/oom_score_adj instead.
udev: renamed network interface eth0 to eth1
MINIX-fs: blocksize too small for device
ISO 9660 Extensions: RRIP_1991A
udev: starting version 151
md: bind<sdb2>
md: bind<sdb1>
md: bind<sda1>
bio: create slab <bio-1> at 1
md/raid1:md126: active with 2 out of 2 mirrors
md126: detected capacity change from 0 to 320741376
md126: unknown partition table
md: bind<sda2>
md/raid:md127: device sda2 operational as raid disk 1
md/raid:md127: device sdb2 operational as raid disk 0
md/raid:md127: allocated 2136kB
md/raid:md127: raid level 5 active with 2 out of 2 devices, algorithm 2
RAID conf printout:
--- level:5 rd:2 wd:2
disk 0, o:1, dev:sdb2
disk 1, o:1, dev:sda2
md127: detected capacity change from 0 to 499784286208
md127: unknown partition table
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
EXT2-fs (sdc1): warning: mounting unchecked fs, running e2fsck is recommended
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-01 9:52 ` Anthony Wright
@ 2011-06-01 14:23 ` Konrad Rzeszutek Wilk
2011-06-02 12:24 ` Anthony Wright
0 siblings, 1 reply; 21+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-01 14:23 UTC (permalink / raw)
To: Anthony Wright; +Cc: Ian.Pratt, xen-devel
> > Does the issue go away if you limit the total amount of memory visible to xen to 4GB? (mem=4096M on the xen command line)
> >
> > If so, I suspect this is a swiotlb or latent UHCI driver issue. The easiest way of working around it is just to ensure all > dom0 memory gets allocated below 4GB, but it would be good to investigate properly.
>
> Yes! I put mem=4096M on the xen command line as asked and everything starts working as it should yea!
<scratches his head> This is most unexpected. Do you get the same problem if you boot
baremetal and do 'iommu=soft' (without the mem=4G)? You should see the same error.
Can you attach your lspci -vvv output too please? This is the motherboard you have right?
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131613
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-01 14:23 ` Konrad Rzeszutek Wilk
@ 2011-06-02 12:24 ` Anthony Wright
2011-06-02 14:38 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 21+ messages in thread
From: Anthony Wright @ 2011-06-02 12:24 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Ian Pratt, xen-devel
[-- Attachment #1: Type: text/plain, Size: 551 bytes --]
> Do you get the same problem if you boot baremetal and do 'iommu=soft' (without the mem=4G)? You should see the same error.
I'm not quite sure what you mean by "boot baremetal", but I've just done a boot where I removed the mem=4096M options from the Xen boot line and added an 'iommu=soft' option. The result of this was a corrupt USB device again.
> Can you attach your lspci -vvv output too please?
attached.
> This is the motherboard you have right?
> http://www.newegg.com/Product/Product.aspx?Item=N82E16813131613
Yes that's the motherboard.
[-- Attachment #2: m2n68_am_plus-lspci-vvv --]
[-- Type: application/octet-stream, Size: 21790 bytes --]
00:00.0 RAM memory: nVidia Corporation MCP61 LPC Bridge (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 83a4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 83a4
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 0900 [size=256]
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 83a4
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 0e00 [size=64]
Region 4: I/O ports at 0600 [size=64]
Region 5: I/O ports at 0700 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: nForce2_smbus
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 83a4
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 83a4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at dfffb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 83a4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: Memory at dfffac00 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: [b8] Subsystem: ASUSTeK Computer Inc. Device 83a4
Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 8290
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at dfff4000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: HDA Intel
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device 83a4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_amd
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 83a4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 291
Region 0: Memory at dfff9000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at e480 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
Address: 00000000fee0100c Data: 41d8
Masking: 000000fe Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: forcedeth
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 83a4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at e400 [size=8]
Region 1: I/O ports at e080 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at dc00 [size=4]
Region 4: I/O ports at d880 [size=16]
Region 5: Memory at dfff8000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 83a4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: I/O ports at d800 [size=8]
Region 1: I/O ports at d480 [size=4]
Region 2: I/O ports at d400 [size=8]
Region 3: I/O ports at d080 [size=4]
Region 4: I/O ports at d000 [size=16]
Region 5: Memory at dffef000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device 0000
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Address: 00000000fee0100c Data: 41a0
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 75.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=WRR32
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device 0000
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Address: 00000000fee0100c Data: 41a8
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #2, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=WRR32
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device 0000
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Address: 00000000fee0100c Data: 41b0
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #3, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=WRR32
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 7025 / nForce 630a] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 83a4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at dd000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at dffc0000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: nvidiafb
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 3.00
Link Frequency: 1.0GHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-02 12:24 ` Anthony Wright
@ 2011-06-02 14:38 ` Konrad Rzeszutek Wilk
2011-06-02 14:44 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 21+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-02 14:38 UTC (permalink / raw)
To: Anthony Wright; +Cc: Ian Pratt, xen-devel
On Thu, Jun 02, 2011 at 01:24:56PM +0100, Anthony Wright wrote:
> > Do you get the same problem if you boot baremetal and do 'iommu=soft' (without the mem=4G)? You should see the same error.
> I'm not quite sure what you mean by "boot baremetal", but I've just done a boot where I removed the mem=4096M options from the Xen boot line and added an 'iommu=soft' option. The result of this was a corrupt USB device again.
Baremetal = no Xen.
>
> > Can you attach your lspci -vvv output too please?
> attached.
>
> > This is the motherboard you have right?
> > http://www.newegg.com/Product/Product.aspx?Item=N82E16813131613
> Yes that's the motherboard.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-02 14:38 ` Konrad Rzeszutek Wilk
@ 2011-06-02 14:44 ` Konrad Rzeszutek Wilk
2011-06-02 15:59 ` Anthony Wright
2011-06-09 13:11 ` Anthony Wright
0 siblings, 2 replies; 21+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-02 14:44 UTC (permalink / raw)
To: Anthony Wright; +Cc: Ian Pratt, xen-devel
On Thu, Jun 02, 2011 at 10:38:07AM -0400, Konrad Rzeszutek Wilk wrote:
> On Thu, Jun 02, 2011 at 01:24:56PM +0100, Anthony Wright wrote:
> > > Do you get the same problem if you boot baremetal and do 'iommu=soft' (without the mem=4G)? You should see the same error.
> > I'm not quite sure what you mean by "boot baremetal", but I've just done a boot where I removed the mem=4096M options from the Xen boot line and added an 'iommu=soft' option. The result of this was a corrupt USB device again.
>
> Baremetal = no Xen.
> >
> > > Can you attach your lspci -vvv output too please?
> > attached.
> >
> > > This is the motherboard you have right?
> > > http://www.newegg.com/Product/Product.aspx?Item=N82E16813131613
> > Yes that's the motherboard.
I've an BIOSTART motherboard that looks to have a similar EHCI controller - MCP61 based.
Is the USB stick that you are using any special? Or is just a normal one?
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-02 14:44 ` Konrad Rzeszutek Wilk
@ 2011-06-02 15:59 ` Anthony Wright
2011-06-09 13:11 ` Anthony Wright
1 sibling, 0 replies; 21+ messages in thread
From: Anthony Wright @ 2011-06-02 15:59 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Ian Pratt, xen-devel
On 02/06/2011 15:44, Konrad Rzeszutek Wilk wrote:
> On Thu, Jun 02, 2011 at 10:38:07AM -0400, Konrad Rzeszutek Wilk wrote:
>> On Thu, Jun 02, 2011 at 01:24:56PM +0100, Anthony Wright wrote:
>>>> Do you get the same problem if you boot baremetal and do 'iommu=soft' (without the mem=4G)? You should see the same error.
>>> I'm not quite sure what you mean by "boot baremetal", but I've just done a boot where I removed the mem=4096M options from the Xen boot line and added an 'iommu=soft' option. The result of this was a corrupt USB device again.
>> Baremetal = no Xen.
Tried a baremetal boot (no Xen) with ''iommu=soft" on the linux command
line, and the USB reads fine.
> I've an BIOSTART motherboard that looks to have a similar EHCI controller - MCP61 based.
> Is the USB stick that you are using any special? Or is just a normal one?
It's a Kingston DataTraveler G2 (2GB). It's the cheapest memory stick I
could find at the time, nothing special as far as I know.
I'll try to get the kernel sorted out to get around the screen
corruption tonight, and try on another system tomorrow and with a
different memory stick too.
Cheers,
Anthony.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-02 14:44 ` Konrad Rzeszutek Wilk
2011-06-02 15:59 ` Anthony Wright
@ 2011-06-09 13:11 ` Anthony Wright
2011-06-09 13:25 ` Ian Pratt
2011-06-09 13:32 ` Konrad Rzeszutek Wilk
1 sibling, 2 replies; 21+ messages in thread
From: Anthony Wright @ 2011-06-09 13:11 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Ian Pratt, xen-devel
I've got things running on a number of systems now, and have tried a
number of combinations. I have changed machines and USB memory sticks,
and the fault seems to be related to the machine rather than the memory
stick. I have 3 machines with >4GB ram & 2 memory sticks, changing
memory sticks doesn't have any effect, but only two out of the three
machines I tried has a problem, the third works fine.
I have previously attached the lspci -vvv for one of the machines that
fails, and the lspci -vvv for the second machine is attached to an email
relating to the screen corruption problems I was having a few days ago
(Screen corruption and crash at boot with Xen 4.1.0 & linux 2.6.39 on
some systems).
Cheers,
Anthony
On 02/06/2011 15:44, Konrad Rzeszutek Wilk wrote:
> On Thu, Jun 02, 2011 at 10:38:07AM -0400, Konrad Rzeszutek Wilk wrote:
>> On Thu, Jun 02, 2011 at 01:24:56PM +0100, Anthony Wright wrote:
>>>> Do you get the same problem if you boot baremetal and do 'iommu=soft' (without the mem=4G)? You should see the same error.
>>> I'm not quite sure what you mean by "boot baremetal", but I've just done a boot where I removed the mem=4096M options from the Xen boot line and added an 'iommu=soft' option. The result of this was a corrupt USB device again.
>> Baremetal = no Xen.
>>>> Can you attach your lspci -vvv output too please?
>>> attached.
>>>
>>>> This is the motherboard you have right?
>>>> http://www.newegg.com/Product/Product.aspx?Item=N82E16813131613
>>> Yes that's the motherboard.
> I've an BIOSTART motherboard that looks to have a similar EHCI controller - MCP61 based.
> Is the USB stick that you are using any special? Or is just a normal one?
^ permalink raw reply [flat|nested] 21+ messages in thread
* RE: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-09 13:11 ` Anthony Wright
@ 2011-06-09 13:25 ` Ian Pratt
2011-06-09 13:32 ` Konrad Rzeszutek Wilk
1 sibling, 0 replies; 21+ messages in thread
From: Ian Pratt @ 2011-06-09 13:25 UTC (permalink / raw)
To: Anthony Wright, Konrad Rzeszutek Wilk; +Cc: Ian Pratt, xen-devel
> I've got things running on a number of systems now, and have tried a
> number of combinations. I have changed machines and USB memory sticks,
> and the fault seems to be related to the machine rather than the memory
> stick. I have 3 machines with >4GB ram & 2 memory sticks, changing
> memory sticks doesn't have any effect, but only two out of the three
> machines I tried has a problem, the third works fine.
If you're copying the data from the hard disk, you should check that you have the BIOS set to operate the SATA controller in AHCI mode rather than legacy IDE. I've seen the legacy IDE driver tickle swiotlb issues too above 4GB.
Ian
> I have previously attached the lspci -vvv for one of the machines that
> fails, and the lspci -vvv for the second machine is attached to an email
> relating to the screen corruption problems I was having a few days ago
> (Screen corruption and crash at boot with Xen 4.1.0 & linux 2.6.39 on
> some systems).
>
> Cheers,
>
> Anthony
>
> On 02/06/2011 15:44, Konrad Rzeszutek Wilk wrote:
> > On Thu, Jun 02, 2011 at 10:38:07AM -0400, Konrad Rzeszutek Wilk wrote:
> >> On Thu, Jun 02, 2011 at 01:24:56PM +0100, Anthony Wright wrote:
> >>>> Do you get the same problem if you boot baremetal and do
> 'iommu=soft' (without the mem=4G)? You should see the same error.
> >>> I'm not quite sure what you mean by "boot baremetal", but I've just
> done a boot where I removed the mem=4096M options from the Xen boot
> line and added an 'iommu=soft' option. The result of this was a corrupt USB
> device again.
> >> Baremetal = no Xen.
> >>>> Can you attach your lspci -vvv output too please?
> >>> attached.
> >>>
> >>>> This is the motherboard you have right?
> >>>>
> http://www.newegg.com/Product/Product.aspx?Item=N82E16813131613
> >>> Yes that's the motherboard.
> > I've an BIOSTART motherboard that looks to have a similar EHCI controller -
> MCP61 based.
> > Is the USB stick that you are using any special? Or is just a normal one?
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-09 13:11 ` Anthony Wright
2011-06-09 13:25 ` Ian Pratt
@ 2011-06-09 13:32 ` Konrad Rzeszutek Wilk
2011-06-09 13:40 ` Anthony Wright
2011-06-10 16:46 ` Konrad Rzeszutek Wilk
1 sibling, 2 replies; 21+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-09 13:32 UTC (permalink / raw)
To: Anthony Wright; +Cc: Ian Pratt, xen-devel
On Thu, Jun 09, 2011 at 02:11:27PM +0100, Anthony Wright wrote:
> I've got things running on a number of systems now, and have tried a
> number of combinations. I have changed machines and USB memory sticks,
> and the fault seems to be related to the machine rather than the memory
> stick. I have 3 machines with >4GB ram & 2 memory sticks, changing
> memory sticks doesn't have any effect, but only two out of the three
> machines I tried has a problem, the third works fine.
One of them was an MCP61 based (BIOSTAR) and the other is
SB600 (Gigabyte gs_ma69vm_s2) Southbridge. Both are AMD based ... and
I vagually remember something about quirks for those boards for the AHCI
controller.
Let me see if I can reproduce this issue on my box next week.
>
> I have previously attached the lspci -vvv for one of the machines that
> fails, and the lspci -vvv for the second machine is attached to an email
> relating to the screen corruption problems I was having a few days ago
Right, and the screen corruption was due to a lacking patch (the VGA support).
> (Screen corruption and crash at boot with Xen 4.1.0 & linux 2.6.39 on
> some systems).
There was a crash too? What was that due too?
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-09 13:32 ` Konrad Rzeszutek Wilk
@ 2011-06-09 13:40 ` Anthony Wright
2011-06-10 16:46 ` Konrad Rzeszutek Wilk
1 sibling, 0 replies; 21+ messages in thread
From: Anthony Wright @ 2011-06-09 13:40 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Ian Pratt, xen-devel
On 09/06/2011 14:32, Konrad Rzeszutek Wilk wrote:
>
>> I have previously attached the lspci -vvv for one of the machines that
>> fails, and the lspci -vvv for the second machine is attached to an email
>> relating to the screen corruption problems I was having a few days ago
> Right, and the screen corruption was due to a lacking patch (the VGA support).
>> (Screen corruption and crash at boot with Xen 4.1.0 & linux 2.6.39 on
>> some systems).
> There was a crash too? What was that due too?
The crash I'm refering to was related to the VGA corruption I had that
was fixed in stable/2.6.39.x. The screen filled with junk on the
handover from Xen to Dom0 and I presumed the system had crashed at that
point. The crash is unrelated to the USB problem.
Anthony.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-09 13:32 ` Konrad Rzeszutek Wilk
2011-06-09 13:40 ` Anthony Wright
@ 2011-06-10 16:46 ` Konrad Rzeszutek Wilk
2011-06-13 22:06 ` Konrad Rzeszutek Wilk
1 sibling, 1 reply; 21+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-10 16:46 UTC (permalink / raw)
To: Anthony Wright; +Cc: Ian Pratt, xen-devel
On Thu, Jun 09, 2011 at 09:32:08AM -0400, Konrad Rzeszutek Wilk wrote:
> On Thu, Jun 09, 2011 at 02:11:27PM +0100, Anthony Wright wrote:
> > I've got things running on a number of systems now, and have tried a
> > number of combinations. I have changed machines and USB memory sticks,
> > and the fault seems to be related to the machine rather than the memory
> > stick. I have 3 machines with >4GB ram & 2 memory sticks, changing
> > memory sticks doesn't have any effect, but only two out of the three
> > machines I tried has a problem, the third works fine.
>
> One of them was an MCP61 based (BIOSTAR) and the other is
> SB600 (Gigabyte gs_ma69vm_s2) Southbridge. Both are AMD based ... and
> I vagually remember something about quirks for those boards for the AHCI
> controller.
>
> Let me see if I can reproduce this issue on my box next week.
I tried on my BIOSTAR Group N61PB-M2S which has 4GB physically
and couldn't reproduce it. But let me try to put in some more memory and see.
> >
> > I have previously attached the lspci -vvv for one of the machines that
> > fails, and the lspci -vvv for the second machine is attached to an email
> > relating to the screen corruption problems I was having a few days ago
>
> Right, and the screen corruption was due to a lacking patch (the VGA support).
> > (Screen corruption and crash at boot with Xen 4.1.0 & linux 2.6.39 on
> > some systems).
>
> There was a crash too? What was that due too?
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-10 16:46 ` Konrad Rzeszutek Wilk
@ 2011-06-13 22:06 ` Konrad Rzeszutek Wilk
2011-06-15 10:45 ` Anthony Wright
0 siblings, 1 reply; 21+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-13 22:06 UTC (permalink / raw)
To: Anthony Wright; +Cc: Ian Pratt, xen-devel
On Fri, Jun 10, 2011 at 12:46:56PM -0400, Konrad Rzeszutek Wilk wrote:
> On Thu, Jun 09, 2011 at 09:32:08AM -0400, Konrad Rzeszutek Wilk wrote:
> > On Thu, Jun 09, 2011 at 02:11:27PM +0100, Anthony Wright wrote:
> > > I've got things running on a number of systems now, and have tried a
> > > number of combinations. I have changed machines and USB memory sticks,
> > > and the fault seems to be related to the machine rather than the memory
> > > stick. I have 3 machines with >4GB ram & 2 memory sticks, changing
> > > memory sticks doesn't have any effect, but only two out of the three
> > > machines I tried has a problem, the third works fine.
> >
> > One of them was an MCP61 based (BIOSTAR) and the other is
> > SB600 (Gigabyte gs_ma69vm_s2) Southbridge. Both are AMD based ... and
> > I vagually remember something about quirks for those boards for the AHCI
> > controller.
> >
> > Let me see if I can reproduce this issue on my box next week.
>
> I tried on my BIOSTAR Group N61PB-M2S which has 4GB physically
> and couldn't reproduce it. But let me try to put in some more memory and see.
So, playing around on a 8gB machine with ballooning memory up (I had initially set
only 2GB to dom0) and then using the md5sum I was able to trigger this once.
You said you are hitting this everytime right? Do you limit the amount of memory
to the initial domain?
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-13 22:06 ` Konrad Rzeszutek Wilk
@ 2011-06-15 10:45 ` Anthony Wright
2011-06-15 11:43 ` Ian Pratt
2011-06-16 20:10 ` Konrad Rzeszutek Wilk
0 siblings, 2 replies; 21+ messages in thread
From: Anthony Wright @ 2011-06-15 10:45 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Ian Pratt, xen-devel
I hit it every time, though with slight variations on which blocks are affected. I get the problem on two out of three of my machines. I don't supply any command line options to Xen or the kernel. I do use an initramfs.
----- Original Message -----
From: "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
To: "Anthony Wright" <anthony@overnetdata.com>
Cc: "Ian Pratt" <Ian.Pratt@eu.citrix.com>, xen-devel@lists.xensource.com
Sent: Monday, 13 June, 2011 11:06:25 PM
Subject: Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
On Fri, Jun 10, 2011 at 12:46:56PM -0400, Konrad Rzeszutek Wilk wrote:
> On Thu, Jun 09, 2011 at 09:32:08AM -0400, Konrad Rzeszutek Wilk wrote:
> > On Thu, Jun 09, 2011 at 02:11:27PM +0100, Anthony Wright wrote:
> > > I've got things running on a number of systems now, and have tried a
> > > number of combinations. I have changed machines and USB memory sticks,
> > > and the fault seems to be related to the machine rather than the memory
> > > stick. I have 3 machines with >4GB ram & 2 memory sticks, changing
> > > memory sticks doesn't have any effect, but only two out of the three
> > > machines I tried has a problem, the third works fine.
> >
> > One of them was an MCP61 based (BIOSTAR) and the other is
> > SB600 (Gigabyte gs_ma69vm_s2) Southbridge. Both are AMD based ... and
> > I vagually remember something about quirks for those boards for the AHCI
> > controller.
> >
> > Let me see if I can reproduce this issue on my box next week.
>
> I tried on my BIOSTAR Group N61PB-M2S which has 4GB physically
> and couldn't reproduce it. But let me try to put in some more memory and see.
So, playing around on a 8gB machine with ballooning memory up (I had initially set
only 2GB to dom0) and then using the md5sum I was able to trigger this once.
You said you are hitting this everytime right? Do you limit the amount of memory
to the initial domain?
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* RE: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-15 10:45 ` Anthony Wright
@ 2011-06-15 11:43 ` Ian Pratt
2011-06-16 20:10 ` Konrad Rzeszutek Wilk
1 sibling, 0 replies; 21+ messages in thread
From: Ian Pratt @ 2011-06-15 11:43 UTC (permalink / raw)
To: Anthony Wright, Konrad Rzeszutek Wilk; +Cc: Ian Pratt, xen-devel
[-- Attachment #1: Type: text/plain, Size: 2572 bytes --]
> I hit it every time, though with slight variations on which blocks are affected. I
> get the problem on two out of three of my machines. I don't supply any
> command line options to Xen or the kernel. I do use an initramfs.
If you're seeing the issue I think you are, you'll be vulnerable to it whenever any of dom0's memory is allocated above 4GB.
If you patch xen to always allocate dom0's memory from below 4GB I bet you don't see the issue (though obviously you'll be limited to having a dom0 that is a bit smaller than 4GB). The real bug is probably in the EHCI driver's use of swiotlb.
Ian
> ----- Original Message -----
> From: "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
> To: "Anthony Wright" <anthony@overnetdata.com>
> Cc: "Ian Pratt" <Ian.Pratt@eu.citrix.com>, xen-devel@lists.xensource.com
> Sent: Monday, 13 June, 2011 11:06:25 PM
> Subject: Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
>
> On Fri, Jun 10, 2011 at 12:46:56PM -0400, Konrad Rzeszutek Wilk wrote:
> > On Thu, Jun 09, 2011 at 09:32:08AM -0400, Konrad Rzeszutek Wilk wrote:
> > > On Thu, Jun 09, 2011 at 02:11:27PM +0100, Anthony Wright wrote:
> > > > I've got things running on a number of systems now, and have tried a
> > > > number of combinations. I have changed machines and USB memory
> sticks,
> > > > and the fault seems to be related to the machine rather than the
> memory
> > > > stick. I have 3 machines with >4GB ram & 2 memory sticks, changing
> > > > memory sticks doesn't have any effect, but only two out of the three
> > > > machines I tried has a problem, the third works fine.
> > >
> > > One of them was an MCP61 based (BIOSTAR) and the other is
> > > SB600 (Gigabyte gs_ma69vm_s2) Southbridge. Both are AMD based ...
> and
> > > I vagually remember something about quirks for those boards for the
> AHCI
> > > controller.
> > >
> > > Let me see if I can reproduce this issue on my box next week.
> >
> > I tried on my BIOSTAR Group N61PB-M2S which has 4GB physically
> > and couldn't reproduce it. But let me try to put in some more memory and
> see.
>
> So, playing around on a 8gB machine with ballooning memory up (I had
> initially set
> only 2GB to dom0) and then using the md5sum I was able to trigger this once.
>
> You said you are hitting this everytime right? Do you limit the amount of
> memory
> to the initial domain?
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-15 10:45 ` Anthony Wright
2011-06-15 11:43 ` Ian Pratt
@ 2011-06-16 20:10 ` Konrad Rzeszutek Wilk
2011-06-17 9:45 ` Anthony Wright
1 sibling, 1 reply; 21+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-16 20:10 UTC (permalink / raw)
To: Anthony Wright; +Cc: Ian Pratt, xen-devel
On Wed, Jun 15, 2011 at 11:45:33AM +0100, Anthony Wright wrote:
> I hit it every time, though with slight variations on which blocks are affected. I get the problem on two out of three of my machines. I don't supply any command line options to Xen or the kernel. I do use an initramfs.
So a couple of things popped at when looking at this:
a). "sata_nv 0000:00:08.1: BMDMA: failed to set dma mask, falling back to PIO"
That is not good. Somehow it wasn't able to set a 32-bit mask. Don't know
if that is due to the driver or just that the kernel can't do it (b/c it
was compiled with some special options).
b). Are you using some special .config option? If you were to use a normal
distro would you see this?
c). You are using a 32-bit dom0. Didn't notice it until now so I wonder
if there are some lingering issues (for example not flushing the highmemory
mappings) that are at foot. Had you tried a 64-bit kernel before?
d). Does the problem exist if you try it with a 2.6.39 kernel or the 3.0-rc3?
e). Can you run lspci -n ? There is a pretty big file in drivers/usb/host/pci-quirks.c
Want to check against your machine.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-16 20:10 ` Konrad Rzeszutek Wilk
@ 2011-06-17 9:45 ` Anthony Wright
2011-06-20 12:39 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 21+ messages in thread
From: Anthony Wright @ 2011-06-17 9:45 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Ian Pratt, xen-devel
[-- Attachment #1: Type: text/plain, Size: 1208 bytes --]
On 16/06/2011 21:10, Konrad Rzeszutek Wilk wrote:
> So a couple of things popped at when looking at this:
> a). "sata_nv 0000:00:08.1: BMDMA: failed to set dma mask, falling back to PIO"
>
> That is not good. Somehow it wasn't able to set a 32-bit mask. Don't know
> if that is due to the driver or just that the kernel can't do it (b/c it
> was compiled with some special options).
I never saw anything in dmesg or any other logs.
> b). Are you using some special .config option? If you were to use a normal
> distro would you see this?
My config is attached.
> c). You are using a 32-bit dom0. Didn't notice it until now so I wonder
> if there are some lingering issues (for example not flushing the highmemory
> mappings) that are at foot. Had you tried a 64-bit kernel before?
I haven't tried 64 bit because I need a 32 bit kernel.
> d). Does the problem exist if you try it with a 2.6.39 kernel or the 3.0-rc3?
It happens on every kernel I've tried which is 2.6.39, 2.6.39.x & 3.0-rc3
> e). Can you run lspci -n ? There is a pretty big file in drivers/usb/host/pci-quirks.c
> Want to check against your machine.
I have the problem on two machines and have attached the lspci -n for
both of them.
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 75731 bytes --]
#
# Automatically generated make config: don't edit
# Linux/i386 3.0.0-rc3 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_FHANDLE is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
#
# GCOV-based kernel profiling
#
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_MRST is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_X86_32_IRIS is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=128
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG is not set
CONFIG_KVM_CLOCK=y
# CONFIG_KVM_GUEST is not set
# CONFIG_LGUEST_GUEST is not set
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
CONFIG_TOSHIBA=y
CONFIG_I8K=y
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_HIGHPTE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x400000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATE_CALLBACKS=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_IPMI is not set
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=1999
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
CONFIG_X86_LONGRUN=y
# CONFIG_X86_LONGHAUL is not set
CONFIG_X86_E_POWERSAVER=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_STUB=y
CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_I82365=y
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_COMPAQ=y
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
CONFIG_HOTPLUG_PCI_IBM=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_ZONES is not set
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_SNMP=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_TPROXY=y
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
# CONFIG_NETFILTER_XT_SET is not set
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=y
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_CT=y
CONFIG_NETFILTER_XT_TARGET_DSCP=y
CONFIG_NETFILTER_XT_TARGET_HL=y
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
CONFIG_NETFILTER_XT_TARGET_LED=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_TEE=y
CONFIG_NETFILTER_XT_TARGET_TPROXY=y
CONFIG_NETFILTER_XT_TARGET_TRACE=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_IPVS=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_SOCKET=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_LIST_SET=y
CONFIG_IP_VS=y
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_SED=y
CONFIG_IP_VS_NQ=y
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=y
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=y
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PROTO_DCCP=y
CONFIG_NF_NAT_PROTO_GRE=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_PROTO_SCTP=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_QUEUE=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_MH=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_TARGET_HL=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_RAW=y
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
CONFIG_BRIDGE_EBT_ARP=y
CONFIG_BRIDGE_EBT_IP=y
CONFIG_BRIDGE_EBT_IP6=y
CONFIG_BRIDGE_EBT_LIMIT=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
CONFIG_BRIDGE_EBT_STP=y
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
CONFIG_BRIDGE_EBT_MARK_T=y
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
CONFIG_BRIDGE_EBT_ULOG=y
CONFIG_BRIDGE_EBT_NFLOG=y
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=y
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
CONFIG_NET_SCH_INGRESS=y
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_IPT=y
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_ACT_SKBEDIT=y
# CONFIG_NET_ACT_CSUM is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_SYS_HYPERVISOR=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
CONFIG_SSFDC=y
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=y
# CONFIG_MTD_SWAP is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=y
CONFIG_MTD_NETSC520=y
CONFIG_MTD_TS5500=y
# CONFIG_MTD_SBC_GXX is not set
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=y
CONFIG_MTD_CK804XROM=y
CONFIG_MTD_SCB2_FLASH=y
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=y
# CONFIG_MTD_PCMCIA is not set
# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_LATCH_ADDR is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTDRAM_ABS_POS=0
CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_DENALI is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_RICOH is not set
CONFIG_MTD_NAND_DISKONCHIP=y
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=y
CONFIG_MTD_NAND_CS553X=y
CONFIG_MTD_NAND_NANDSIM=y
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ALAUDA=y
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=y
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_OSD=y
CONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=y
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=y
CONFIG_SCSI_7000FASST=y
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AHA152X=y
CONFIG_SCSI_AHA1542=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_IN2000=y
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_FLASHPOINT=y
# CONFIG_VMWARE_PVSCSI is not set
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_DTC3280=y
CONFIG_SCSI_EATA=y
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_GENERIC_NCR5380=y
CONFIG_SCSI_GENERIC_NCR5380_MMIO=y
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_PPA=y
CONFIG_SCSI_IMM=y
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_PAS16=y
CONFIG_SCSI_QLOGIC_FAS=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
CONFIG_SCSI_SYM53C416=y
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y
CONFIG_SCSI_T128=y
CONFIG_SCSI_U14_34F=y
# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=y
CONFIG_SCSI_NSP32=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PMCRAID=y
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_SRP=y
CONFIG_SCSI_BFA_FC=y
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=y
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_INIC162X=y
CONFIG_SATA_ACARD_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SIL=y
CONFIG_SATA_SIS=y
CONFIG_SATA_SVW=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARASAN_CF=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
CONFIG_PATA_CS5535=y
CONFIG_PATA_CS5536=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT8213=y
CONFIG_PATA_IT821X=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_MARVELL=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RDC=y
CONFIG_PATA_SC1200=y
CONFIG_PATA_SCH=y
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_TOSHIBA=y
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
CONFIG_PATA_ISAPNP=y
CONFIG_PATA_MPIIX=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_OPTI=y
CONFIG_PATA_PCMCIA=y
CONFIG_PATA_QDI=y
CONFIG_PATA_RZ1000=y
CONFIG_PATA_WINBOND_VLB=y
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MULTICORE_RAID456=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_RAID=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_QL=y
CONFIG_DM_MULTIPATH_ST=y
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LAN=y
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=y
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=y
CONFIG_DUMMY=y
CONFIG_BONDING=y
CONFIG_MACVLAN=y
# CONFIG_MACVTAP is not set
CONFIG_EQUALIZER=y
CONFIG_TUN=y
CONFIG_VETH=y
CONFIG_NET_SB1000=y
# CONFIG_ARCNET is not set
CONFIG_MII=y
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
# CONFIG_BCM63XX_PHY is not set
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
CONFIG_CASSINI=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=y
CONFIG_EL2=y
CONFIG_ELPLUS=y
CONFIG_EL16=y
CONFIG_EL3=y
CONFIG_3C515=y
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
CONFIG_LANCE=y
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=y
CONFIG_ULTRA=y
CONFIG_SMC9194=y
CONFIG_ETHOC=y
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI52=y
CONFIG_NI65=y
CONFIG_DNET=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=y
CONFIG_WINBOND_840=y
CONFIG_DM9102=y
CONFIG_ULI526X=y
CONFIG_PCMCIA_XIRCOM=y
CONFIG_AT1700=y
CONFIG_DEPCA=y
CONFIG_HP100=y
CONFIG_NET_ISA=y
CONFIG_E2100=y
CONFIG_EWRK3=y
CONFIG_EEXPRESS=y
CONFIG_EEXPRESS_PRO=y
CONFIG_HPLAN_PLUS=y
CONFIG_HPLAN=y
CONFIG_LP486E=y
CONFIG_ETH16I=y
CONFIG_NE2000=y
CONFIG_ZNET=y
CONFIG_SEEQ8005=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_AMD8111_ETH=y
CONFIG_ADAPTEC_STARFIRE=y
CONFIG_AC3200=y
CONFIG_KSZ884X_PCI=y
CONFIG_APRICOT=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
CONFIG_CS89x0=y
CONFIG_E100=y
CONFIG_FEALNX=y
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R6040=y
CONFIG_SIS900=y
CONFIG_EPIC100=y
# CONFIG_SMSC9420 is not set
CONFIG_SUNDANCE=y
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=y
CONFIG_KS8842=y
CONFIG_KS8851_MLL=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=y
CONFIG_NET_POCKET=y
CONFIG_ATP=y
CONFIG_DE600=y
CONFIG_DE620=y
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IP1000=y
CONFIG_IGB=y
CONFIG_IGB_DCA=y
CONFIG_IGBVF=y
CONFIG_NS83820=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_R8169=y
CONFIG_SIS190=y
CONFIG_SKGE=y
CONFIG_SKY2=y
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_QLA3XXX=y
CONFIG_ATL1=y
CONFIG_ATL1E=y
CONFIG_ATL1C=y
CONFIG_JME=y
CONFIG_STMMAC_ETH=y
# CONFIG_STMMAC_DA is not set
# CONFIG_STMMAC_DUAL_MAC is not set
CONFIG_PCH_GBE=y
CONFIG_NETDEV_10000=y
CONFIG_MDIO=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=y
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_ENIC=y
CONFIG_IXGBE=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBEVF=y
CONFIG_IXGB=y
CONFIG_S2IO=y
CONFIG_VXGE=y
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_MYRI10GE=y
CONFIG_MYRI10GE_DCA=y
CONFIG_NETXEN_NIC=y
CONFIG_NIU=y
CONFIG_MLX4_EN=y
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=y
CONFIG_BNX2X=y
CONFIG_QLCNIC=y
CONFIG_QLGE=y
CONFIG_BNA=y
CONFIG_SFC=y
CONFIG_SFC_MTD=y
CONFIG_BE2NET=y
CONFIG_TR=y
# CONFIG_IBMTR is not set
CONFIG_IBMOL=y
CONFIG_IBMLS=y
CONFIG_3C359=y
CONFIG_TMS380TR=y
CONFIG_TMSPCI=y
CONFIG_SKISA=y
CONFIG_PROTEON=y
CONFIG_ABYSS=y
CONFIG_SMCTR=y
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SMSC75XX is not set
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_NET_CX82310_ETH is not set
CONFIG_USB_NET_INT51X1=y
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_VL600 is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=y
CONFIG_PCMCIA_3C574=y
CONFIG_PCMCIA_FMVJ18X=y
CONFIG_PCMCIA_PCNET=y
CONFIG_PCMCIA_NMCLAN=y
CONFIG_PCMCIA_SMC91C92=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_PCMCIA_AXNET=y
CONFIG_PCMCIA_IBMTR=y
# CONFIG_WAN is not set
#
# CAIF transport drivers
#
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_XEN_NETDEV_BACKEND=y
CONFIG_FDDI=y
CONFIG_DEFXX=y
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=y
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=y
CONFIG_PPPOE=y
# CONFIG_SLIP is not set
CONFIG_SLHC=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=y
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=y
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_NVRAM=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=y
CONFIG_IPWIRELESS=y
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=y
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NFORCE2_S4985 is not set
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=y
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_ISA=y
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_BASIC_MMIO is not set
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_VX855 is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ20Z75 is not set
CONFIG_BATTERY_BQ27x00=y
CONFIG_BATTERY_BQ27X00_I2C=y
CONFIG_BATTERY_BQ27X00_PLATFORM=y
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=y
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
CONFIG_SENSORS_ADM1275=y
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH5627=y
CONFIG_SENSORS_ADS1015=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_APPLESMC=y
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_LPC_SCH=y
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWII_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_ARVO is not set
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
# CONFIG_HID_ROCCAT_KOVAPLUS is not set
# CONFIG_HID_ROCCAT_PYRA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not set
# CONFIG_USB_SL811_CS is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=y
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_NOP_USB_XCEIV=y
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_CLEVO_MAIL=y
# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_NFC_DEVICES is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=y
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=y
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=y
CONFIG_INFINIBAND_NES=y
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=y
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_ISER=y
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
# CONFIG_EDAC_MCE_INJ is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MCE=y
CONFIG_EDAC_AMD76X=y
CONFIG_EDAC_E7XXX=y
CONFIG_EDAC_E752X=y
CONFIG_EDAC_I82875P=y
CONFIG_EDAC_I82975X=y
CONFIG_EDAC_I3000=y
# CONFIG_EDAC_I3200 is not set
CONFIG_EDAC_X38=y
CONFIG_EDAC_I5400=y
CONFIG_EDAC_I7CORE=y
CONFIG_EDAC_I82860=y
CONFIG_EDAC_R82600=y
CONFIG_EDAC_I5000=y
CONFIG_EDAC_I5100=y
CONFIG_EDAC_I7300=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_RV3029C2=y
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_INTEL_MID_DMAC=y
CONFIG_INTEL_IOATDMA=y
CONFIG_TIMB_DMA=y
CONFIG_PCH_DMA=y
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
CONFIG_XEN_GRANT_DEV_ALLOC=y
CONFIG_XEN_PLATFORM_PCI=y
CONFIG_SWIOTLB_XEN=y
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
CONFIG_CLKSRC_I8253=y
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y
# CONFIG_SIGMA is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_SET_MODULE_RONX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
CONFIG_CRYPTO_DEV_GEODE=y
CONFIG_CRYPTO_DEV_HIFN_795X=y
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
CONFIG_VHOST_NET=y
# CONFIG_LGUEST is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y
[-- Attachment #3: lspci-n-machine1 --]
[-- Type: text/plain, Size: 648 bytes --]
00:00.0 0500: 10de:03e2 (rev a1)
00:01.0 0601: 10de:03e1 (rev a2)
00:01.1 0c05: 10de:03eb (rev a2)
00:01.2 0500: 10de:03f5 (rev a2)
00:02.0 0c03: 10de:03f1 (rev a3)
00:02.1 0c03: 10de:03f2 (rev a3)
00:04.0 0604: 10de:03f3 (rev a1)
00:05.0 0403: 10de:03f0 (rev a2)
00:06.0 0101: 10de:03ec (rev a2)
00:07.0 0680: 10de:03ef (rev a2)
00:08.0 0101: 10de:03f6 (rev a2)
00:08.1 0101: 10de:03f6 (rev a2)
00:09.0 0604: 10de:03e8 (rev a2)
00:0b.0 0604: 10de:03e9 (rev a2)
00:0c.0 0604: 10de:03e9 (rev a2)
00:0d.0 0300: 10de:03d6 (rev a2)
00:18.0 0600: 1022:1200
00:18.1 0600: 1022:1201
00:18.2 0600: 1022:1202
00:18.3 0600: 1022:1203
00:18.4 0600: 1022:1204
[-- Attachment #4: lspci-n-machine2 --]
[-- Type: text/plain, Size: 498 bytes --]
00:00.0 0600: 1002:7910
00:01.0 0604: 1002:7912
00:12.0 0106: 1002:4380
00:13.0 0c03: 1002:4387
00:13.1 0c03: 1002:4388
00:13.2 0c03: 1002:4389
00:13.3 0c03: 1002:438a
00:13.4 0c03: 1002:438b
00:13.5 0c03: 1002:4386
00:14.0 0c05: 1002:4385 (rev 14)
00:14.1 0101: 1002:438c
00:14.2 0403: 1002:4383
00:14.3 0601: 1002:438d
00:14.4 0604: 1002:4384
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:05.0 0300: 1002:791e
02:0f.0 0200: 10ec:8167 (rev 10)
[-- Attachment #5: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-17 9:45 ` Anthony Wright
@ 2011-06-20 12:39 ` Konrad Rzeszutek Wilk
2011-07-29 19:24 ` Anthony Wright
0 siblings, 1 reply; 21+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-20 12:39 UTC (permalink / raw)
To: Anthony Wright; +Cc: Ian Pratt, xen-devel
On Fri, Jun 17, 2011 at 10:45:41AM +0100, Anthony Wright wrote:
> On 16/06/2011 21:10, Konrad Rzeszutek Wilk wrote:
> > So a couple of things popped at when looking at this:
> > a). "sata_nv 0000:00:08.1: BMDMA: failed to set dma mask, falling back to PIO"
> >
> > That is not good. Somehow it wasn't able to set a 32-bit mask. Don't know
> > if that is due to the driver or just that the kernel can't do it (b/c it
> > was compiled with some special options).
> I never saw anything in dmesg or any other logs.
Uh, I copied that from your logs.
> > b). Are you using some special .config option? If you were to use a normal
> > distro would you see this?
> My config is attached.
Great.
> > c). You are using a 32-bit dom0. Didn't notice it until now so I wonder
> > if there are some lingering issues (for example not flushing the highmemory
> > mappings) that are at foot. Had you tried a 64-bit kernel before?
> I haven't tried 64 bit because I need a 32 bit kernel.
> > d). Does the problem exist if you try it with a 2.6.39 kernel or the 3.0-rc3?
> It happens on every kernel I've tried which is 2.6.39, 2.6.39.x & 3.0-rc3
> > e). Can you run lspci -n ? There is a pretty big file in drivers/usb/host/pci-quirks.c
> > Want to check against your machine.
> I have the problem on two machines and have attached the lspci -n for
> both of them.
Is it possible for you provide this binary blob/USB disk somewhere so I can
test it on my hardware?
> #
> # Automatically generated make config: don't edit
> # Linux/i386 3.0.0-rc3 Kernel Configuration
> #
> # CONFIG_64BIT is not set
> CONFIG_X86_32=y
> # CONFIG_X86_64 is not set
> CONFIG_X86=y
> CONFIG_INSTRUCTION_DECODER=y
> CONFIG_OUTPUT_FORMAT="elf32-i386"
> CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
> CONFIG_GENERIC_CMOS_UPDATE=y
> CONFIG_CLOCKSOURCE_WATCHDOG=y
> CONFIG_GENERIC_CLOCKEVENTS=y
> CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_STACKTRACE_SUPPORT=y
> CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> CONFIG_MMU=y
> CONFIG_ZONE_DMA=y
> # CONFIG_NEED_DMA_MAP_STATE is not set
> CONFIG_NEED_SG_DMA_LENGTH=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_GENERIC_BUG=y
> CONFIG_GENERIC_HWEIGHT=y
> CONFIG_GENERIC_GPIO=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> # CONFIG_GENERIC_TIME_VSYSCALL is not set
> CONFIG_ARCH_HAS_CPU_RELAX=y
> CONFIG_ARCH_HAS_DEFAULT_IDLE=y
> CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> CONFIG_HAVE_SETUP_PER_CPU_AREA=y
> CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
> CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
> # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
> CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> CONFIG_ARCH_SUSPEND_POSSIBLE=y
> # CONFIG_ZONE_DMA32 is not set
> CONFIG_ARCH_POPULATES_NODE_MAP=y
> # CONFIG_AUDIT_ARCH is not set
> CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
> CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
> CONFIG_X86_32_SMP=y
> CONFIG_X86_HT=y
> CONFIG_X86_32_LAZY_GS=y
> CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
> CONFIG_KTIME_SCALAR=y
> CONFIG_ARCH_CPU_PROBE_RELEASE=y
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> CONFIG_CONSTRUCTORS=y
> CONFIG_HAVE_IRQ_WORK=y
> CONFIG_IRQ_WORK=y
>
> #
> # General setup
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> CONFIG_CROSS_COMPILE=""
> CONFIG_LOCALVERSION=""
> # CONFIG_LOCALVERSION_AUTO is not set
> CONFIG_HAVE_KERNEL_GZIP=y
> CONFIG_HAVE_KERNEL_BZIP2=y
> CONFIG_HAVE_KERNEL_LZMA=y
> CONFIG_HAVE_KERNEL_XZ=y
> CONFIG_HAVE_KERNEL_LZO=y
> CONFIG_KERNEL_GZIP=y
> # CONFIG_KERNEL_BZIP2 is not set
> # CONFIG_KERNEL_LZMA is not set
> # CONFIG_KERNEL_XZ is not set
> # CONFIG_KERNEL_LZO is not set
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_SYSVIPC_SYSCTL=y
> CONFIG_POSIX_MQUEUE=y
> CONFIG_POSIX_MQUEUE_SYSCTL=y
> CONFIG_BSD_PROCESS_ACCT=y
> # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> # CONFIG_FHANDLE is not set
> CONFIG_TASKSTATS=y
> CONFIG_TASK_DELAY_ACCT=y
> CONFIG_TASK_XACCT=y
> CONFIG_TASK_IO_ACCOUNTING=y
> CONFIG_AUDIT=y
> CONFIG_AUDITSYSCALL=y
> CONFIG_AUDIT_WATCH=y
> CONFIG_AUDIT_TREE=y
> CONFIG_HAVE_GENERIC_HARDIRQS=y
>
> #
> # IRQ subsystem
> #
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_HAVE_SPARSE_IRQ=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_GENERIC_IRQ_SHOW=y
> CONFIG_GENERIC_PENDING_IRQ=y
> CONFIG_IRQ_FORCED_THREADING=y
> CONFIG_SPARSE_IRQ=y
>
> #
> # RCU Subsystem
> #
> CONFIG_TREE_RCU=y
> # CONFIG_PREEMPT_RCU is not set
> # CONFIG_RCU_TRACE is not set
> CONFIG_RCU_FANOUT=32
> # CONFIG_RCU_FANOUT_EXACT is not set
> # CONFIG_RCU_FAST_NO_HZ is not set
> # CONFIG_TREE_RCU_TRACE is not set
> # CONFIG_IKCONFIG is not set
> CONFIG_LOG_BUF_SHIFT=17
> CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> CONFIG_CGROUPS=y
> # CONFIG_CGROUP_DEBUG is not set
> # CONFIG_CGROUP_FREEZER is not set
> CONFIG_CGROUP_DEVICE=y
> CONFIG_CPUSETS=y
> CONFIG_PROC_PID_CPUSET=y
> CONFIG_CGROUP_CPUACCT=y
> CONFIG_RESOURCE_COUNTERS=y
> # CONFIG_CGROUP_MEM_RES_CTLR is not set
> # CONFIG_CGROUP_PERF is not set
> CONFIG_CGROUP_SCHED=y
> CONFIG_FAIR_GROUP_SCHED=y
> CONFIG_RT_GROUP_SCHED=y
> # CONFIG_BLK_CGROUP is not set
> CONFIG_NAMESPACES=y
> CONFIG_UTS_NS=y
> CONFIG_IPC_NS=y
> CONFIG_USER_NS=y
> CONFIG_PID_NS=y
> # CONFIG_NET_NS is not set
> # CONFIG_SCHED_AUTOGROUP is not set
> # CONFIG_SYSFS_DEPRECATED is not set
> CONFIG_RELAY=y
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_RD_GZIP=y
> CONFIG_RD_BZIP2=y
> CONFIG_RD_LZMA=y
> CONFIG_RD_XZ=y
> CONFIG_RD_LZO=y
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> CONFIG_SYSCTL=y
> CONFIG_ANON_INODES=y
> # CONFIG_EXPERT is not set
> CONFIG_UID16=y
> CONFIG_SYSCTL_SYSCALL=y
> CONFIG_KALLSYMS=y
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_PCSPKR_PLATFORM=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SIGNALFD=y
> CONFIG_TIMERFD=y
> CONFIG_EVENTFD=y
> CONFIG_SHMEM=y
> CONFIG_AIO=y
> # CONFIG_EMBEDDED is not set
> CONFIG_HAVE_PERF_EVENTS=y
>
> #
> # Kernel Performance Events And Counters
> #
> CONFIG_PERF_EVENTS=y
> CONFIG_PERF_COUNTERS=y
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_PCI_QUIRKS=y
> CONFIG_SLUB_DEBUG=y
> # CONFIG_COMPAT_BRK is not set
> # CONFIG_SLAB is not set
> CONFIG_SLUB=y
> # CONFIG_PROFILING is not set
> CONFIG_HAVE_OPROFILE=y
> # CONFIG_KPROBES is not set
> # CONFIG_JUMP_LABEL is not set
> CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
> CONFIG_HAVE_IOREMAP_PROT=y
> CONFIG_HAVE_KPROBES=y
> CONFIG_HAVE_KRETPROBES=y
> CONFIG_HAVE_OPTPROBES=y
> CONFIG_HAVE_ARCH_TRACEHOOK=y
> CONFIG_HAVE_DMA_ATTRS=y
> CONFIG_USE_GENERIC_SMP_HELPERS=y
> CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
> CONFIG_HAVE_DMA_API_DEBUG=y
> CONFIG_HAVE_HW_BREAKPOINT=y
> CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
> CONFIG_HAVE_USER_RETURN_NOTIFIER=y
> CONFIG_HAVE_PERF_EVENTS_NMI=y
> CONFIG_HAVE_ARCH_JUMP_LABEL=y
>
> #
> # GCOV-based kernel profiling
> #
> CONFIG_HAVE_GENERIC_DMA_COHERENT=y
> CONFIG_SLABINFO=y
> CONFIG_RT_MUTEXES=y
> CONFIG_BASE_SMALL=0
> CONFIG_MODULES=y
> # CONFIG_MODULE_FORCE_LOAD is not set
> CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> # CONFIG_MODVERSIONS is not set
> CONFIG_MODULE_SRCVERSION_ALL=y
> CONFIG_STOP_MACHINE=y
> CONFIG_BLOCK=y
> CONFIG_LBDAF=y
> CONFIG_BLK_DEV_BSG=y
> CONFIG_BLK_DEV_INTEGRITY=y
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_DEFAULT_DEADLINE is not set
> CONFIG_DEFAULT_CFQ=y
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED="cfq"
> # CONFIG_INLINE_SPIN_TRYLOCK is not set
> # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
> # CONFIG_INLINE_SPIN_LOCK is not set
> # CONFIG_INLINE_SPIN_LOCK_BH is not set
> # CONFIG_INLINE_SPIN_LOCK_IRQ is not set
> # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
> CONFIG_INLINE_SPIN_UNLOCK=y
> # CONFIG_INLINE_SPIN_UNLOCK_BH is not set
> CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
> # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
> # CONFIG_INLINE_READ_TRYLOCK is not set
> # CONFIG_INLINE_READ_LOCK is not set
> # CONFIG_INLINE_READ_LOCK_BH is not set
> # CONFIG_INLINE_READ_LOCK_IRQ is not set
> # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
> CONFIG_INLINE_READ_UNLOCK=y
> # CONFIG_INLINE_READ_UNLOCK_BH is not set
> CONFIG_INLINE_READ_UNLOCK_IRQ=y
> # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
> # CONFIG_INLINE_WRITE_TRYLOCK is not set
> # CONFIG_INLINE_WRITE_LOCK is not set
> # CONFIG_INLINE_WRITE_LOCK_BH is not set
> # CONFIG_INLINE_WRITE_LOCK_IRQ is not set
> # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
> CONFIG_INLINE_WRITE_UNLOCK=y
> # CONFIG_INLINE_WRITE_UNLOCK_BH is not set
> CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
> # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
> CONFIG_MUTEX_SPIN_ON_OWNER=y
> CONFIG_FREEZER=y
>
> #
> # Processor type and features
> #
> CONFIG_TICK_ONESHOT=y
> CONFIG_NO_HZ=y
> CONFIG_HIGH_RES_TIMERS=y
> CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> CONFIG_SMP=y
> CONFIG_X86_MPPARSE=y
> # CONFIG_X86_BIGSMP is not set
> CONFIG_X86_EXTENDED_PLATFORM=y
> # CONFIG_X86_MRST is not set
> # CONFIG_X86_RDC321X is not set
> # CONFIG_X86_32_NON_STANDARD is not set
> CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
> # CONFIG_X86_32_IRIS is not set
> CONFIG_SCHED_OMIT_FRAME_POINTER=y
> CONFIG_PARAVIRT_GUEST=y
> CONFIG_XEN=y
> CONFIG_XEN_DOM0=y
> CONFIG_XEN_PRIVILEGED_GUEST=y
> CONFIG_XEN_PVHVM=y
> CONFIG_XEN_MAX_DOMAIN_MEMORY=128
> CONFIG_XEN_SAVE_RESTORE=y
> # CONFIG_XEN_DEBUG is not set
> CONFIG_KVM_CLOCK=y
> # CONFIG_KVM_GUEST is not set
> # CONFIG_LGUEST_GUEST is not set
> CONFIG_PARAVIRT=y
> CONFIG_PARAVIRT_SPINLOCKS=y
> CONFIG_PARAVIRT_CLOCK=y
> CONFIG_NO_BOOTMEM=y
> # CONFIG_MEMTEST is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUMM is not set
> CONFIG_MPENTIUM4=y
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MEFFICEON is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MELAN is not set
> # CONFIG_MGEODEGX1 is not set
> # CONFIG_MGEODE_LX is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_MVIAC7 is not set
> # CONFIG_MCORE2 is not set
> # CONFIG_MATOM is not set
> CONFIG_X86_GENERIC=y
> CONFIG_X86_INTERNODE_CACHE_SHIFT=7
> CONFIG_X86_CMPXCHG=y
> CONFIG_CMPXCHG_LOCAL=y
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_X86_XADD=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_TSC=y
> CONFIG_X86_CMPXCHG64=y
> CONFIG_X86_CMOV=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=5
> CONFIG_X86_DEBUGCTLMSR=y
> CONFIG_CPU_SUP_INTEL=y
> CONFIG_CPU_SUP_CYRIX_32=y
> CONFIG_CPU_SUP_AMD=y
> CONFIG_CPU_SUP_CENTAUR=y
> CONFIG_CPU_SUP_TRANSMETA_32=y
> CONFIG_CPU_SUP_UMC_32=y
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> CONFIG_DMI=y
> CONFIG_SWIOTLB=y
> CONFIG_IOMMU_HELPER=y
> # CONFIG_IOMMU_API is not set
> CONFIG_NR_CPUS=8
> CONFIG_SCHED_SMT=y
> CONFIG_SCHED_MC=y
> # CONFIG_IRQ_TIME_ACCOUNTING is not set
> # CONFIG_PREEMPT_NONE is not set
> CONFIG_PREEMPT_VOLUNTARY=y
> # CONFIG_PREEMPT is not set
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_INTEL=y
> CONFIG_X86_MCE_AMD=y
> # CONFIG_X86_ANCIENT_MCE is not set
> CONFIG_X86_MCE_THRESHOLD=y
> # CONFIG_X86_MCE_INJECT is not set
> CONFIG_X86_THERMAL_VECTOR=y
> CONFIG_VM86=y
> CONFIG_TOSHIBA=y
> CONFIG_I8K=y
> # CONFIG_X86_REBOOTFIXUPS is not set
> CONFIG_MICROCODE=y
> CONFIG_MICROCODE_INTEL=y
> # CONFIG_MICROCODE_AMD is not set
> CONFIG_MICROCODE_OLD_INTERFACE=y
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> # CONFIG_NOHIGHMEM is not set
> # CONFIG_HIGHMEM4G is not set
> CONFIG_HIGHMEM64G=y
> CONFIG_PAGE_OFFSET=0xC0000000
> CONFIG_HIGHMEM=y
> CONFIG_X86_PAE=y
> CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
> CONFIG_ARCH_DMA_ADDR_T_64BIT=y
> CONFIG_ARCH_FLATMEM_ENABLE=y
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> CONFIG_ILLEGAL_POINTER_VALUE=0
> CONFIG_SELECT_MEMORY_MODEL=y
> CONFIG_FLATMEM_MANUAL=y
> # CONFIG_SPARSEMEM_MANUAL is not set
> CONFIG_FLATMEM=y
> CONFIG_FLAT_NODE_MEM_MAP=y
> CONFIG_SPARSEMEM_STATIC=y
> CONFIG_HAVE_MEMBLOCK=y
> CONFIG_PAGEFLAGS_EXTENDED=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> # CONFIG_COMPACTION is not set
> CONFIG_PHYS_ADDR_T_64BIT=y
> CONFIG_ZONE_DMA_FLAG=1
> CONFIG_BOUNCE=y
> CONFIG_VIRT_TO_BUS=y
> CONFIG_MMU_NOTIFIER=y
> # CONFIG_KSM is not set
> CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
> CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
> # CONFIG_MEMORY_FAILURE is not set
> # CONFIG_TRANSPARENT_HUGEPAGE is not set
> # CONFIG_CLEANCACHE is not set
> # CONFIG_HIGHPTE is not set
> # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
> CONFIG_X86_RESERVE_LOW=64
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> CONFIG_MTRR_SANITIZER=y
> CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
> CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
> CONFIG_X86_PAT=y
> CONFIG_ARCH_USES_PG_UNCACHED=y
> CONFIG_EFI=y
> CONFIG_SECCOMP=y
> # CONFIG_CC_STACKPROTECTOR is not set
> # CONFIG_HZ_100 is not set
> # CONFIG_HZ_250 is not set
> # CONFIG_HZ_300 is not set
> CONFIG_HZ_1000=y
> CONFIG_HZ=1000
> CONFIG_SCHED_HRTICK=y
> CONFIG_KEXEC=y
> CONFIG_CRASH_DUMP=y
> CONFIG_PHYSICAL_START=0x400000
> CONFIG_RELOCATABLE=y
> CONFIG_X86_NEED_RELOCS=y
> CONFIG_PHYSICAL_ALIGN=0x400000
> CONFIG_HOTPLUG_CPU=y
> # CONFIG_COMPAT_VDSO is not set
> # CONFIG_CMDLINE_BOOL is not set
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
>
> #
> # Power management and ACPI options
> #
> # CONFIG_SUSPEND is not set
> CONFIG_HIBERNATE_CALLBACKS=y
> # CONFIG_HIBERNATION is not set
> CONFIG_PM_SLEEP=y
> CONFIG_PM_SLEEP_SMP=y
> # CONFIG_PM_RUNTIME is not set
> CONFIG_PM=y
> # CONFIG_PM_DEBUG is not set
> CONFIG_ACPI=y
> # CONFIG_ACPI_PROCFS is not set
> # CONFIG_ACPI_PROCFS_POWER is not set
> # CONFIG_ACPI_EC_DEBUGFS is not set
> # CONFIG_ACPI_PROC_EVENT is not set
> CONFIG_ACPI_AC=y
> CONFIG_ACPI_BATTERY=y
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_DOCK=y
> CONFIG_ACPI_PROCESSOR=y
> # CONFIG_ACPI_IPMI is not set
> CONFIG_ACPI_HOTPLUG_CPU=y
> # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
> CONFIG_ACPI_THERMAL=y
> # CONFIG_ACPI_CUSTOM_DSDT is not set
> CONFIG_ACPI_BLACKLIST_YEAR=1999
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_PCI_SLOT=y
> CONFIG_X86_PM_TIMER=y
> CONFIG_ACPI_CONTAINER=y
> CONFIG_ACPI_SBS=y
> # CONFIG_ACPI_HED is not set
> # CONFIG_ACPI_APEI is not set
> # CONFIG_SFI is not set
> # CONFIG_APM is not set
>
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_TABLE=y
> CONFIG_CPU_FREQ_STAT=y
> CONFIG_CPU_FREQ_STAT_DETAILS=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> CONFIG_CPU_FREQ_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_GOV_ONDEMAND=y
> CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
>
> #
> # x86 CPU frequency scaling drivers
> #
> # CONFIG_X86_PCC_CPUFREQ is not set
> CONFIG_X86_ACPI_CPUFREQ=y
> # CONFIG_X86_POWERNOW_K6 is not set
> CONFIG_X86_POWERNOW_K7=y
> CONFIG_X86_POWERNOW_K7_ACPI=y
> CONFIG_X86_POWERNOW_K8=y
> # CONFIG_X86_GX_SUSPMOD is not set
> # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
> CONFIG_X86_SPEEDSTEP_ICH=y
> CONFIG_X86_SPEEDSTEP_SMI=y
> CONFIG_X86_P4_CLOCKMOD=y
> # CONFIG_X86_CPUFREQ_NFORCE2 is not set
> CONFIG_X86_LONGRUN=y
> # CONFIG_X86_LONGHAUL is not set
> CONFIG_X86_E_POWERSAVER=y
>
> #
> # shared options
> #
> CONFIG_X86_SPEEDSTEP_LIB=y
> # CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
> CONFIG_CPU_IDLE=y
> CONFIG_CPU_IDLE_GOV_LADDER=y
> CONFIG_CPU_IDLE_GOV_MENU=y
> # CONFIG_INTEL_IDLE is not set
>
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GOMMCONFIG is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> CONFIG_PCI_XEN=y
> CONFIG_PCI_DOMAINS=y
> # CONFIG_PCI_CNB20LE_QUIRK is not set
> # CONFIG_DMAR is not set
> CONFIG_PCIEPORTBUS=y
> CONFIG_HOTPLUG_PCI_PCIE=y
> CONFIG_PCIEAER=y
> # CONFIG_PCIE_ECRC is not set
> # CONFIG_PCIEAER_INJECT is not set
> CONFIG_PCIEASPM=y
> # CONFIG_PCIEASPM_DEBUG is not set
> CONFIG_ARCH_SUPPORTS_MSI=y
> CONFIG_PCI_MSI=y
> CONFIG_PCI_STUB=y
> CONFIG_XEN_PCIDEV_FRONTEND=y
> CONFIG_HT_IRQ=y
> # CONFIG_PCI_IOV is not set
> CONFIG_PCI_IOAPIC=y
> CONFIG_PCI_LABEL=y
> CONFIG_ISA_DMA_API=y
> CONFIG_ISA=y
> # CONFIG_EISA is not set
> # CONFIG_MCA is not set
> # CONFIG_SCx200 is not set
> CONFIG_AMD_NB=y
> CONFIG_PCCARD=y
> CONFIG_PCMCIA=y
> CONFIG_PCMCIA_LOAD_CIS=y
> CONFIG_CARDBUS=y
>
> #
> # PC-card bridges
> #
> CONFIG_YENTA=y
> CONFIG_YENTA_O2=y
> CONFIG_YENTA_RICOH=y
> CONFIG_YENTA_TI=y
> CONFIG_YENTA_ENE_TUNE=y
> CONFIG_YENTA_TOSHIBA=y
> CONFIG_PD6729=y
> CONFIG_I82092=y
> CONFIG_I82365=y
> # CONFIG_TCIC is not set
> CONFIG_PCMCIA_PROBE=y
> CONFIG_PCCARD_NONSTATIC=y
> CONFIG_HOTPLUG_PCI=y
> CONFIG_HOTPLUG_PCI_FAKE=y
> CONFIG_HOTPLUG_PCI_COMPAQ=y
> # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
> CONFIG_HOTPLUG_PCI_IBM=y
> CONFIG_HOTPLUG_PCI_ACPI=y
> CONFIG_HOTPLUG_PCI_ACPI_IBM=y
> # CONFIG_HOTPLUG_PCI_CPCI is not set
> # CONFIG_HOTPLUG_PCI_SHPC is not set
> # CONFIG_RAPIDIO is not set
>
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> CONFIG_HAVE_AOUT=y
> # CONFIG_BINFMT_AOUT is not set
> CONFIG_BINFMT_MISC=y
> CONFIG_HAVE_ATOMIC_IOMAP=y
> CONFIG_HAVE_TEXT_POKE_SMP=y
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_UNIX=y
> CONFIG_XFRM=y
> CONFIG_XFRM_USER=y
> CONFIG_XFRM_SUB_POLICY=y
> CONFIG_XFRM_MIGRATE=y
> CONFIG_XFRM_STATISTICS=y
> CONFIG_XFRM_IPCOMP=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> # CONFIG_IP_FIB_TRIE_STATS is not set
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> CONFIG_IP_ROUTE_VERBOSE=y
> CONFIG_IP_ROUTE_CLASSID=y
> # CONFIG_IP_PNP is not set
> CONFIG_NET_IPIP=y
> # CONFIG_NET_IPGRE_DEMUX is not set
> CONFIG_IP_MROUTE=y
> # CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
> CONFIG_IP_PIMSM_V1=y
> CONFIG_IP_PIMSM_V2=y
> # CONFIG_ARPD is not set
> CONFIG_SYN_COOKIES=y
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_INET_XFRM_TUNNEL is not set
> CONFIG_INET_TUNNEL=y
> # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> # CONFIG_INET_XFRM_MODE_TUNNEL is not set
> # CONFIG_INET_XFRM_MODE_BEET is not set
> CONFIG_INET_LRO=y
> CONFIG_INET_DIAG=y
> CONFIG_INET_TCP_DIAG=y
> CONFIG_TCP_CONG_ADVANCED=y
> CONFIG_TCP_CONG_BIC=y
> CONFIG_TCP_CONG_CUBIC=y
> CONFIG_TCP_CONG_WESTWOOD=y
> CONFIG_TCP_CONG_HTCP=y
> CONFIG_TCP_CONG_HSTCP=y
> CONFIG_TCP_CONG_HYBLA=y
> CONFIG_TCP_CONG_VEGAS=y
> CONFIG_TCP_CONG_SCALABLE=y
> CONFIG_TCP_CONG_LP=y
> CONFIG_TCP_CONG_VENO=y
> CONFIG_TCP_CONG_YEAH=y
> CONFIG_TCP_CONG_ILLINOIS=y
> # CONFIG_DEFAULT_BIC is not set
> CONFIG_DEFAULT_CUBIC=y
> # CONFIG_DEFAULT_HTCP is not set
> # CONFIG_DEFAULT_HYBLA is not set
> # CONFIG_DEFAULT_VEGAS is not set
> # CONFIG_DEFAULT_VENO is not set
> # CONFIG_DEFAULT_WESTWOOD is not set
> # CONFIG_DEFAULT_RENO is not set
> CONFIG_DEFAULT_TCP_CONG="cubic"
> CONFIG_TCP_MD5SIG=y
> CONFIG_IPV6=y
> CONFIG_IPV6_PRIVACY=y
> CONFIG_IPV6_ROUTER_PREF=y
> CONFIG_IPV6_ROUTE_INFO=y
> CONFIG_IPV6_OPTIMISTIC_DAD=y
> CONFIG_INET6_AH=y
> CONFIG_INET6_ESP=y
> CONFIG_INET6_IPCOMP=y
> CONFIG_IPV6_MIP6=y
> CONFIG_INET6_XFRM_TUNNEL=y
> CONFIG_INET6_TUNNEL=y
> CONFIG_INET6_XFRM_MODE_TRANSPORT=y
> CONFIG_INET6_XFRM_MODE_TUNNEL=y
> CONFIG_INET6_XFRM_MODE_BEET=y
> CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
> CONFIG_IPV6_SIT=y
> # CONFIG_IPV6_SIT_6RD is not set
> CONFIG_IPV6_NDISC_NODETYPE=y
> CONFIG_IPV6_TUNNEL=y
> CONFIG_IPV6_MULTIPLE_TABLES=y
> CONFIG_IPV6_SUBTREES=y
> CONFIG_IPV6_MROUTE=y
> # CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
> CONFIG_IPV6_PIMSM_V2=y
> CONFIG_NETWORK_SECMARK=y
> # CONFIG_NETWORK_PHY_TIMESTAMPING is not set
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> CONFIG_NETFILTER_ADVANCED=y
> CONFIG_BRIDGE_NETFILTER=y
>
> #
> # Core Netfilter Configuration
> #
> CONFIG_NETFILTER_NETLINK=y
> CONFIG_NETFILTER_NETLINK_QUEUE=y
> CONFIG_NETFILTER_NETLINK_LOG=y
> CONFIG_NF_CONNTRACK=y
> CONFIG_NF_CONNTRACK_MARK=y
> CONFIG_NF_CONNTRACK_SECMARK=y
> # CONFIG_NF_CONNTRACK_ZONES is not set
> CONFIG_NF_CONNTRACK_EVENTS=y
> CONFIG_NF_CONNTRACK_TIMESTAMP=y
> CONFIG_NF_CT_PROTO_DCCP=y
> CONFIG_NF_CT_PROTO_GRE=y
> CONFIG_NF_CT_PROTO_SCTP=y
> CONFIG_NF_CT_PROTO_UDPLITE=y
> CONFIG_NF_CONNTRACK_AMANDA=y
> CONFIG_NF_CONNTRACK_FTP=y
> CONFIG_NF_CONNTRACK_H323=y
> CONFIG_NF_CONNTRACK_IRC=y
> CONFIG_NF_CONNTRACK_BROADCAST=y
> CONFIG_NF_CONNTRACK_NETBIOS_NS=y
> CONFIG_NF_CONNTRACK_SNMP=y
> CONFIG_NF_CONNTRACK_PPTP=y
> CONFIG_NF_CONNTRACK_SANE=y
> CONFIG_NF_CONNTRACK_SIP=y
> CONFIG_NF_CONNTRACK_TFTP=y
> CONFIG_NF_CT_NETLINK=y
> CONFIG_NETFILTER_TPROXY=y
> CONFIG_NETFILTER_XTABLES=y
>
> #
> # Xtables combined modules
> #
> CONFIG_NETFILTER_XT_MARK=y
> CONFIG_NETFILTER_XT_CONNMARK=y
> # CONFIG_NETFILTER_XT_SET is not set
>
> #
> # Xtables targets
> #
> CONFIG_NETFILTER_XT_TARGET_AUDIT=y
> CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
> CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
> CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
> CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
> CONFIG_NETFILTER_XT_TARGET_CT=y
> CONFIG_NETFILTER_XT_TARGET_DSCP=y
> CONFIG_NETFILTER_XT_TARGET_HL=y
> CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
> CONFIG_NETFILTER_XT_TARGET_LED=y
> CONFIG_NETFILTER_XT_TARGET_MARK=y
> CONFIG_NETFILTER_XT_TARGET_NFLOG=y
> CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
> CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
> CONFIG_NETFILTER_XT_TARGET_RATEEST=y
> CONFIG_NETFILTER_XT_TARGET_TEE=y
> CONFIG_NETFILTER_XT_TARGET_TPROXY=y
> CONFIG_NETFILTER_XT_TARGET_TRACE=y
> CONFIG_NETFILTER_XT_TARGET_SECMARK=y
> CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
> CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y
>
> #
> # Xtables matches
> #
> CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
> CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
> CONFIG_NETFILTER_XT_MATCH_COMMENT=y
> CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
> CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
> CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
> CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
> # CONFIG_NETFILTER_XT_MATCH_CPU is not set
> CONFIG_NETFILTER_XT_MATCH_DCCP=y
> CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
> CONFIG_NETFILTER_XT_MATCH_DSCP=y
> CONFIG_NETFILTER_XT_MATCH_ESP=y
> CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
> CONFIG_NETFILTER_XT_MATCH_HELPER=y
> CONFIG_NETFILTER_XT_MATCH_HL=y
> CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
> CONFIG_NETFILTER_XT_MATCH_IPVS=y
> CONFIG_NETFILTER_XT_MATCH_LENGTH=y
> CONFIG_NETFILTER_XT_MATCH_LIMIT=y
> CONFIG_NETFILTER_XT_MATCH_MAC=y
> CONFIG_NETFILTER_XT_MATCH_MARK=y
> CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
> CONFIG_NETFILTER_XT_MATCH_OSF=y
> CONFIG_NETFILTER_XT_MATCH_OWNER=y
> CONFIG_NETFILTER_XT_MATCH_POLICY=y
> CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
> CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
> CONFIG_NETFILTER_XT_MATCH_QUOTA=y
> CONFIG_NETFILTER_XT_MATCH_RATEEST=y
> CONFIG_NETFILTER_XT_MATCH_REALM=y
> CONFIG_NETFILTER_XT_MATCH_RECENT=y
> CONFIG_NETFILTER_XT_MATCH_SCTP=y
> CONFIG_NETFILTER_XT_MATCH_SOCKET=y
> CONFIG_NETFILTER_XT_MATCH_STATE=y
> CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
> CONFIG_NETFILTER_XT_MATCH_STRING=y
> CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
> CONFIG_NETFILTER_XT_MATCH_TIME=y
> CONFIG_NETFILTER_XT_MATCH_U32=y
> CONFIG_IP_SET=y
> CONFIG_IP_SET_MAX=256
> CONFIG_IP_SET_BITMAP_IP=y
> CONFIG_IP_SET_BITMAP_IPMAC=y
> CONFIG_IP_SET_BITMAP_PORT=y
> CONFIG_IP_SET_HASH_IP=y
> CONFIG_IP_SET_HASH_IPPORT=y
> CONFIG_IP_SET_HASH_IPPORTIP=y
> CONFIG_IP_SET_HASH_IPPORTNET=y
> CONFIG_IP_SET_HASH_NET=y
> CONFIG_IP_SET_HASH_NETPORT=y
> CONFIG_IP_SET_LIST_SET=y
> CONFIG_IP_VS=y
> CONFIG_IP_VS_IPV6=y
> # CONFIG_IP_VS_DEBUG is not set
> CONFIG_IP_VS_TAB_BITS=12
>
> #
> # IPVS transport protocol load balancing support
> #
> CONFIG_IP_VS_PROTO_TCP=y
> CONFIG_IP_VS_PROTO_UDP=y
> CONFIG_IP_VS_PROTO_AH_ESP=y
> CONFIG_IP_VS_PROTO_ESP=y
> CONFIG_IP_VS_PROTO_AH=y
> CONFIG_IP_VS_PROTO_SCTP=y
>
> #
> # IPVS scheduler
> #
> CONFIG_IP_VS_RR=y
> CONFIG_IP_VS_WRR=y
> CONFIG_IP_VS_LC=y
> CONFIG_IP_VS_WLC=y
> CONFIG_IP_VS_LBLC=y
> CONFIG_IP_VS_LBLCR=y
> CONFIG_IP_VS_DH=y
> CONFIG_IP_VS_SH=y
> CONFIG_IP_VS_SED=y
> CONFIG_IP_VS_NQ=y
>
> #
> # IPVS application helper
> #
> CONFIG_IP_VS_FTP=y
> CONFIG_IP_VS_NFCT=y
> CONFIG_IP_VS_PE_SIP=y
>
> #
> # IP: Netfilter Configuration
> #
> CONFIG_NF_DEFRAG_IPV4=y
> CONFIG_NF_CONNTRACK_IPV4=y
> # CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
> CONFIG_IP_NF_QUEUE=y
> CONFIG_IP_NF_IPTABLES=y
> CONFIG_IP_NF_MATCH_AH=y
> CONFIG_IP_NF_MATCH_ECN=y
> CONFIG_IP_NF_MATCH_TTL=y
> CONFIG_IP_NF_FILTER=y
> CONFIG_IP_NF_TARGET_REJECT=y
> CONFIG_IP_NF_TARGET_LOG=y
> CONFIG_IP_NF_TARGET_ULOG=y
> CONFIG_NF_NAT=y
> CONFIG_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=y
> CONFIG_IP_NF_TARGET_NETMAP=y
> CONFIG_IP_NF_TARGET_REDIRECT=y
> CONFIG_NF_NAT_SNMP_BASIC=y
> CONFIG_NF_NAT_PROTO_DCCP=y
> CONFIG_NF_NAT_PROTO_GRE=y
> CONFIG_NF_NAT_PROTO_UDPLITE=y
> CONFIG_NF_NAT_PROTO_SCTP=y
> CONFIG_NF_NAT_FTP=y
> CONFIG_NF_NAT_IRC=y
> CONFIG_NF_NAT_TFTP=y
> CONFIG_NF_NAT_AMANDA=y
> CONFIG_NF_NAT_PPTP=y
> CONFIG_NF_NAT_H323=y
> CONFIG_NF_NAT_SIP=y
> CONFIG_IP_NF_MANGLE=y
> CONFIG_IP_NF_TARGET_CLUSTERIP=y
> CONFIG_IP_NF_TARGET_ECN=y
> CONFIG_IP_NF_TARGET_TTL=y
> CONFIG_IP_NF_RAW=y
> CONFIG_IP_NF_ARPTABLES=y
> CONFIG_IP_NF_ARPFILTER=y
> CONFIG_IP_NF_ARP_MANGLE=y
>
> #
> # IPv6: Netfilter Configuration
> #
> CONFIG_NF_DEFRAG_IPV6=y
> CONFIG_NF_CONNTRACK_IPV6=y
> CONFIG_IP6_NF_QUEUE=y
> CONFIG_IP6_NF_IPTABLES=y
> CONFIG_IP6_NF_MATCH_AH=y
> CONFIG_IP6_NF_MATCH_EUI64=y
> CONFIG_IP6_NF_MATCH_FRAG=y
> CONFIG_IP6_NF_MATCH_OPTS=y
> CONFIG_IP6_NF_MATCH_HL=y
> CONFIG_IP6_NF_MATCH_IPV6HEADER=y
> CONFIG_IP6_NF_MATCH_MH=y
> CONFIG_IP6_NF_MATCH_RT=y
> CONFIG_IP6_NF_TARGET_HL=y
> CONFIG_IP6_NF_TARGET_LOG=y
> CONFIG_IP6_NF_FILTER=y
> CONFIG_IP6_NF_TARGET_REJECT=y
> CONFIG_IP6_NF_MANGLE=y
> CONFIG_IP6_NF_RAW=y
> CONFIG_BRIDGE_NF_EBTABLES=y
> CONFIG_BRIDGE_EBT_BROUTE=y
> CONFIG_BRIDGE_EBT_T_FILTER=y
> CONFIG_BRIDGE_EBT_T_NAT=y
> CONFIG_BRIDGE_EBT_802_3=y
> CONFIG_BRIDGE_EBT_AMONG=y
> CONFIG_BRIDGE_EBT_ARP=y
> CONFIG_BRIDGE_EBT_IP=y
> CONFIG_BRIDGE_EBT_IP6=y
> CONFIG_BRIDGE_EBT_LIMIT=y
> CONFIG_BRIDGE_EBT_MARK=y
> CONFIG_BRIDGE_EBT_PKTTYPE=y
> CONFIG_BRIDGE_EBT_STP=y
> CONFIG_BRIDGE_EBT_VLAN=y
> CONFIG_BRIDGE_EBT_ARPREPLY=y
> CONFIG_BRIDGE_EBT_DNAT=y
> CONFIG_BRIDGE_EBT_MARK_T=y
> CONFIG_BRIDGE_EBT_REDIRECT=y
> CONFIG_BRIDGE_EBT_SNAT=y
> CONFIG_BRIDGE_EBT_LOG=y
> CONFIG_BRIDGE_EBT_ULOG=y
> CONFIG_BRIDGE_EBT_NFLOG=y
> # CONFIG_IP_DCCP is not set
> CONFIG_IP_SCTP=y
> # CONFIG_SCTP_DBG_MSG is not set
> # CONFIG_SCTP_DBG_OBJCNT is not set
> # CONFIG_SCTP_HMAC_NONE is not set
> # CONFIG_SCTP_HMAC_SHA1 is not set
> CONFIG_SCTP_HMAC_MD5=y
> # CONFIG_RDS is not set
> # CONFIG_TIPC is not set
> # CONFIG_ATM is not set
> # CONFIG_L2TP is not set
> CONFIG_STP=y
> CONFIG_GARP=y
> CONFIG_BRIDGE=y
> CONFIG_BRIDGE_IGMP_SNOOPING=y
> # CONFIG_NET_DSA is not set
> CONFIG_VLAN_8021Q=y
> CONFIG_VLAN_8021Q_GVRP=y
> # CONFIG_DECNET is not set
> CONFIG_LLC=y
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_PHONET is not set
> # CONFIG_IEEE802154 is not set
> CONFIG_NET_SCHED=y
>
> #
> # Queueing/Scheduling
> #
> CONFIG_NET_SCH_CBQ=y
> CONFIG_NET_SCH_HTB=y
> CONFIG_NET_SCH_HFSC=y
> CONFIG_NET_SCH_PRIO=y
> CONFIG_NET_SCH_MULTIQ=y
> CONFIG_NET_SCH_RED=y
> # CONFIG_NET_SCH_SFB is not set
> CONFIG_NET_SCH_SFQ=y
> CONFIG_NET_SCH_TEQL=y
> CONFIG_NET_SCH_TBF=y
> CONFIG_NET_SCH_GRED=y
> CONFIG_NET_SCH_DSMARK=y
> CONFIG_NET_SCH_NETEM=y
> # CONFIG_NET_SCH_DRR is not set
> # CONFIG_NET_SCH_MQPRIO is not set
> # CONFIG_NET_SCH_CHOKE is not set
> # CONFIG_NET_SCH_QFQ is not set
> CONFIG_NET_SCH_INGRESS=y
>
> #
> # Classification
> #
> CONFIG_NET_CLS=y
> CONFIG_NET_CLS_BASIC=y
> CONFIG_NET_CLS_TCINDEX=y
> CONFIG_NET_CLS_ROUTE4=y
> CONFIG_NET_CLS_FW=y
> CONFIG_NET_CLS_U32=y
> CONFIG_CLS_U32_PERF=y
> CONFIG_CLS_U32_MARK=y
> CONFIG_NET_CLS_RSVP=y
> CONFIG_NET_CLS_RSVP6=y
> CONFIG_NET_CLS_FLOW=y
> # CONFIG_NET_CLS_CGROUP is not set
> CONFIG_NET_EMATCH=y
> CONFIG_NET_EMATCH_STACK=32
> CONFIG_NET_EMATCH_CMP=y
> CONFIG_NET_EMATCH_NBYTE=y
> CONFIG_NET_EMATCH_U32=y
> CONFIG_NET_EMATCH_META=y
> CONFIG_NET_EMATCH_TEXT=y
> CONFIG_NET_CLS_ACT=y
> CONFIG_NET_ACT_POLICE=y
> CONFIG_NET_ACT_GACT=y
> CONFIG_GACT_PROB=y
> CONFIG_NET_ACT_MIRRED=y
> CONFIG_NET_ACT_IPT=y
> CONFIG_NET_ACT_NAT=y
> CONFIG_NET_ACT_PEDIT=y
> CONFIG_NET_ACT_SIMP=y
> CONFIG_NET_ACT_SKBEDIT=y
> # CONFIG_NET_ACT_CSUM is not set
> CONFIG_NET_CLS_IND=y
> CONFIG_NET_SCH_FIFO=y
> # CONFIG_DCB is not set
> # CONFIG_BATMAN_ADV is not set
> CONFIG_RPS=y
> CONFIG_RFS_ACCEL=y
> CONFIG_XPS=y
>
> #
> # Network testing
> #
> CONFIG_NET_PKTGEN=y
> # CONFIG_HAMRADIO is not set
> # CONFIG_CAN is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> # CONFIG_AF_RXRPC is not set
> CONFIG_FIB_RULES=y
> CONFIG_WIRELESS=y
> CONFIG_WEXT_CORE=y
> CONFIG_WEXT_PROC=y
> CONFIG_CFG80211=y
> # CONFIG_NL80211_TESTMODE is not set
> # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
> # CONFIG_CFG80211_REG_DEBUG is not set
> CONFIG_CFG80211_DEFAULT_PS=y
> # CONFIG_CFG80211_INTERNAL_REGDB is not set
> CONFIG_CFG80211_WEXT=y
> CONFIG_WIRELESS_EXT_SYSFS=y
> CONFIG_LIB80211=y
> # CONFIG_LIB80211_DEBUG is not set
> CONFIG_MAC80211=y
> CONFIG_MAC80211_HAS_RC=y
> CONFIG_MAC80211_RC_MINSTREL=y
> CONFIG_MAC80211_RC_MINSTREL_HT=y
> CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
> CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
> # CONFIG_MAC80211_MESH is not set
> CONFIG_MAC80211_LEDS=y
> # CONFIG_MAC80211_DEBUG_MENU is not set
> # CONFIG_WIMAX is not set
> # CONFIG_RFKILL is not set
> # CONFIG_NET_9P is not set
> # CONFIG_CAIF is not set
> # CONFIG_CEPH_LIB is not set
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> # CONFIG_DEVTMPFS is not set
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> # CONFIG_FIRMWARE_IN_KERNEL is not set
> CONFIG_EXTRA_FIRMWARE=""
> CONFIG_SYS_HYPERVISOR=y
> CONFIG_CONNECTOR=y
> CONFIG_PROC_EVENTS=y
> CONFIG_MTD=y
> # CONFIG_MTD_DEBUG is not set
> # CONFIG_MTD_TESTS is not set
> CONFIG_MTD_REDBOOT_PARTS=y
> CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
> # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
> # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
> # CONFIG_MTD_CMDLINE_PARTS is not set
> CONFIG_MTD_AR7_PARTS=y
>
> #
> # User Modules And Translation Layers
> #
> CONFIG_MTD_CHAR=y
> CONFIG_MTD_BLKDEVS=y
> CONFIG_MTD_BLOCK=y
> CONFIG_FTL=y
> CONFIG_NFTL=y
> CONFIG_NFTL_RW=y
> CONFIG_INFTL=y
> CONFIG_RFD_FTL=y
> CONFIG_SSFDC=y
> # CONFIG_SM_FTL is not set
> CONFIG_MTD_OOPS=y
> # CONFIG_MTD_SWAP is not set
>
> #
> # RAM/ROM/Flash chip drivers
> #
> CONFIG_MTD_CFI=y
> CONFIG_MTD_JEDECPROBE=y
> CONFIG_MTD_GEN_PROBE=y
> # CONFIG_MTD_CFI_ADV_OPTIONS is not set
> CONFIG_MTD_MAP_BANK_WIDTH_1=y
> CONFIG_MTD_MAP_BANK_WIDTH_2=y
> CONFIG_MTD_MAP_BANK_WIDTH_4=y
> # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> CONFIG_MTD_CFI_I1=y
> CONFIG_MTD_CFI_I2=y
> # CONFIG_MTD_CFI_I4 is not set
> # CONFIG_MTD_CFI_I8 is not set
> CONFIG_MTD_CFI_INTELEXT=y
> CONFIG_MTD_CFI_AMDSTD=y
> CONFIG_MTD_CFI_STAA=y
> CONFIG_MTD_CFI_UTIL=y
> CONFIG_MTD_RAM=y
> CONFIG_MTD_ROM=y
> CONFIG_MTD_ABSENT=y
>
> #
> # Mapping drivers for chip access
> #
> CONFIG_MTD_COMPLEX_MAPPINGS=y
> # CONFIG_MTD_PHYSMAP is not set
> CONFIG_MTD_SC520CDP=y
> CONFIG_MTD_NETSC520=y
> CONFIG_MTD_TS5500=y
> # CONFIG_MTD_SBC_GXX is not set
> # CONFIG_MTD_AMD76XROM is not set
> # CONFIG_MTD_ICHXROM is not set
> CONFIG_MTD_ESB2ROM=y
> CONFIG_MTD_CK804XROM=y
> CONFIG_MTD_SCB2_FLASH=y
> # CONFIG_MTD_NETtel is not set
> # CONFIG_MTD_L440GX is not set
> CONFIG_MTD_PCI=y
> # CONFIG_MTD_PCMCIA is not set
> # CONFIG_MTD_GPIO_ADDR is not set
> # CONFIG_MTD_INTEL_VR_NOR is not set
> # CONFIG_MTD_PLATRAM is not set
> # CONFIG_MTD_LATCH_ADDR is not set
>
> #
> # Self-contained MTD device drivers
> #
> CONFIG_MTD_PMC551=y
> # CONFIG_MTD_PMC551_BUGFIX is not set
> # CONFIG_MTD_PMC551_DEBUG is not set
> # CONFIG_MTD_SLRAM is not set
> # CONFIG_MTD_PHRAM is not set
> CONFIG_MTD_MTDRAM=y
> CONFIG_MTDRAM_TOTAL_SIZE=4096
> CONFIG_MTDRAM_ERASE_SIZE=128
> CONFIG_MTDRAM_ABS_POS=0
> CONFIG_MTD_BLOCK2MTD=y
>
> #
> # Disk-On-Chip Device Drivers
> #
> # CONFIG_MTD_DOC2000 is not set
> # CONFIG_MTD_DOC2001 is not set
> # CONFIG_MTD_DOC2001PLUS is not set
> CONFIG_MTD_NAND_ECC=y
> CONFIG_MTD_NAND_ECC_SMC=y
> CONFIG_MTD_NAND=y
> # CONFIG_MTD_NAND_VERIFY_WRITE is not set
> # CONFIG_MTD_NAND_ECC_BCH is not set
> # CONFIG_MTD_SM_COMMON is not set
> # CONFIG_MTD_NAND_MUSEUM_IDS is not set
> # CONFIG_MTD_NAND_DENALI is not set
> CONFIG_MTD_NAND_IDS=y
> # CONFIG_MTD_NAND_RICOH is not set
> CONFIG_MTD_NAND_DISKONCHIP=y
> # CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
> CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
> # CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
> CONFIG_MTD_NAND_CAFE=y
> CONFIG_MTD_NAND_CS553X=y
> CONFIG_MTD_NAND_NANDSIM=y
> # CONFIG_MTD_NAND_PLATFORM is not set
> CONFIG_MTD_ALAUDA=y
> # CONFIG_MTD_ONENAND is not set
>
> #
> # LPDDR flash memory drivers
> #
> # CONFIG_MTD_LPDDR is not set
> CONFIG_MTD_UBI=y
> CONFIG_MTD_UBI_WL_THRESHOLD=4096
> CONFIG_MTD_UBI_BEB_RESERVE=1
> # CONFIG_MTD_UBI_GLUEBI is not set
> # CONFIG_MTD_UBI_DEBUG is not set
> CONFIG_PARPORT=y
> CONFIG_PARPORT_PC=y
> CONFIG_PARPORT_SERIAL=y
> # CONFIG_PARPORT_PC_FIFO is not set
> # CONFIG_PARPORT_PC_SUPERIO is not set
> CONFIG_PARPORT_PC_PCMCIA=y
> # CONFIG_PARPORT_GSC is not set
> # CONFIG_PARPORT_AX88796 is not set
> CONFIG_PARPORT_1284=y
> CONFIG_PNP=y
> CONFIG_PNP_DEBUG_MESSAGES=y
>
> #
> # Protocols
> #
> CONFIG_ISAPNP=y
> # CONFIG_PNPBIOS is not set
> CONFIG_PNPACPI=y
> CONFIG_BLK_DEV=y
> # CONFIG_BLK_DEV_FD is not set
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_PARIDE is not set
> CONFIG_BLK_CPQ_DA=y
> CONFIG_BLK_CPQ_CISS_DA=y
> CONFIG_CISS_SCSI_TAPE=y
> CONFIG_BLK_DEV_DAC960=y
> CONFIG_BLK_DEV_UMEM=y
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=y
> CONFIG_BLK_DEV_CRYPTOLOOP=y
> # CONFIG_BLK_DEV_DRBD is not set
> CONFIG_BLK_DEV_NBD=y
> CONFIG_BLK_DEV_OSD=y
> CONFIG_BLK_DEV_SX8=y
> # CONFIG_BLK_DEV_UB is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=16384
> # CONFIG_BLK_DEV_XIP is not set
> CONFIG_CDROM_PKTCDVD=y
> CONFIG_CDROM_PKTCDVD_BUFFERS=8
> # CONFIG_CDROM_PKTCDVD_WCACHE is not set
> CONFIG_ATA_OVER_ETH=y
> CONFIG_XEN_BLKDEV_FRONTEND=y
> CONFIG_XEN_BLKDEV_BACKEND=y
> CONFIG_VIRTIO_BLK=y
> # CONFIG_BLK_DEV_HD is not set
> # CONFIG_BLK_DEV_RBD is not set
> # CONFIG_SENSORS_LIS3LV02D is not set
> # CONFIG_MISC_DEVICES is not set
> CONFIG_HAVE_IDE=y
> # CONFIG_IDE is not set
>
> #
> # SCSI device support
> #
> CONFIG_SCSI_MOD=y
> CONFIG_RAID_ATTRS=y
> CONFIG_SCSI=y
> CONFIG_SCSI_DMA=y
> CONFIG_SCSI_TGT=y
> CONFIG_SCSI_NETLINK=y
> # CONFIG_SCSI_PROC_FS is not set
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=y
> CONFIG_BLK_DEV_SR_VENDOR=y
> CONFIG_CHR_DEV_SG=y
> CONFIG_CHR_DEV_SCH=y
> CONFIG_SCSI_MULTI_LUN=y
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_LOGGING=y
> CONFIG_SCSI_SCAN_ASYNC=y
> CONFIG_SCSI_WAIT_SCAN=m
>
> #
> # SCSI Transports
> #
> CONFIG_SCSI_SPI_ATTRS=y
> CONFIG_SCSI_FC_ATTRS=y
> CONFIG_SCSI_FC_TGT_ATTRS=y
> CONFIG_SCSI_ISCSI_ATTRS=y
> CONFIG_SCSI_SAS_ATTRS=y
> CONFIG_SCSI_SAS_LIBSAS=y
> CONFIG_SCSI_SAS_ATA=y
> CONFIG_SCSI_SAS_HOST_SMP=y
> CONFIG_SCSI_SRP_ATTRS=y
> CONFIG_SCSI_SRP_TGT_ATTRS=y
> CONFIG_SCSI_LOWLEVEL=y
> CONFIG_ISCSI_TCP=y
> CONFIG_ISCSI_BOOT_SYSFS=y
> # CONFIG_SCSI_CXGB3_ISCSI is not set
> # CONFIG_SCSI_CXGB4_ISCSI is not set
> # CONFIG_SCSI_BNX2_ISCSI is not set
> # CONFIG_SCSI_BNX2X_FCOE is not set
> # CONFIG_BE2ISCSI is not set
> CONFIG_BLK_DEV_3W_XXXX_RAID=y
> CONFIG_SCSI_HPSA=y
> CONFIG_SCSI_3W_9XXX=y
> CONFIG_SCSI_3W_SAS=y
> CONFIG_SCSI_7000FASST=y
> CONFIG_SCSI_ACARD=y
> CONFIG_SCSI_AHA152X=y
> CONFIG_SCSI_AHA1542=y
> CONFIG_SCSI_AACRAID=y
> CONFIG_SCSI_AIC7XXX=y
> CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
> CONFIG_AIC7XXX_RESET_DELAY_MS=15000
> # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
> CONFIG_AIC7XXX_DEBUG_MASK=0
> # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
> CONFIG_SCSI_AIC7XXX_OLD=y
> CONFIG_SCSI_AIC79XX=y
> CONFIG_AIC79XX_CMDS_PER_DEVICE=4
> CONFIG_AIC79XX_RESET_DELAY_MS=15000
> # CONFIG_AIC79XX_DEBUG_ENABLE is not set
> CONFIG_AIC79XX_DEBUG_MASK=0
> # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
> CONFIG_SCSI_AIC94XX=y
> # CONFIG_AIC94XX_DEBUG is not set
> CONFIG_SCSI_MVSAS=y
> CONFIG_SCSI_MVSAS_DEBUG=y
> CONFIG_SCSI_DPT_I2O=y
> CONFIG_SCSI_ADVANSYS=y
> CONFIG_SCSI_IN2000=y
> CONFIG_SCSI_ARCMSR=y
> CONFIG_SCSI_ARCMSR_AER=y
> CONFIG_MEGARAID_NEWGEN=y
> CONFIG_MEGARAID_MM=y
> CONFIG_MEGARAID_MAILBOX=y
> CONFIG_MEGARAID_LEGACY=y
> CONFIG_MEGARAID_SAS=y
> CONFIG_SCSI_MPT2SAS=y
> CONFIG_SCSI_MPT2SAS_MAX_SGE=128
> # CONFIG_SCSI_MPT2SAS_LOGGING is not set
> CONFIG_SCSI_HPTIOP=y
> CONFIG_SCSI_BUSLOGIC=y
> CONFIG_SCSI_FLASHPOINT=y
> # CONFIG_VMWARE_PVSCSI is not set
> CONFIG_LIBFC=y
> CONFIG_LIBFCOE=y
> # CONFIG_FCOE is not set
> # CONFIG_FCOE_FNIC is not set
> CONFIG_SCSI_DMX3191D=y
> CONFIG_SCSI_DTC3280=y
> CONFIG_SCSI_EATA=y
> # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
> # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
> CONFIG_SCSI_EATA_MAX_TAGS=16
> CONFIG_SCSI_FUTURE_DOMAIN=y
> CONFIG_SCSI_GDTH=y
> CONFIG_SCSI_GENERIC_NCR5380=y
> CONFIG_SCSI_GENERIC_NCR5380_MMIO=y
> CONFIG_SCSI_GENERIC_NCR53C400=y
> CONFIG_SCSI_IPS=y
> CONFIG_SCSI_INITIO=y
> CONFIG_SCSI_INIA100=y
> CONFIG_SCSI_PPA=y
> CONFIG_SCSI_IMM=y
> # CONFIG_SCSI_IZIP_EPP16 is not set
> # CONFIG_SCSI_IZIP_SLOW_CTR is not set
> # CONFIG_SCSI_NCR53C406A is not set
> CONFIG_SCSI_STEX=y
> CONFIG_SCSI_SYM53C8XX_2=y
> CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
> CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
> CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
> CONFIG_SCSI_SYM53C8XX_MMIO=y
> CONFIG_SCSI_IPR=y
> CONFIG_SCSI_IPR_TRACE=y
> CONFIG_SCSI_IPR_DUMP=y
> CONFIG_SCSI_PAS16=y
> CONFIG_SCSI_QLOGIC_FAS=y
> CONFIG_SCSI_QLOGIC_1280=y
> CONFIG_SCSI_QLA_FC=y
> CONFIG_SCSI_QLA_ISCSI=y
> CONFIG_SCSI_LPFC=y
> CONFIG_SCSI_SYM53C416=y
> CONFIG_SCSI_DC395x=y
> CONFIG_SCSI_DC390T=y
> CONFIG_SCSI_T128=y
> CONFIG_SCSI_U14_34F=y
> # CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
> # CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
> CONFIG_SCSI_U14_34F_MAX_TAGS=8
> CONFIG_SCSI_ULTRASTOR=y
> CONFIG_SCSI_NSP32=y
> # CONFIG_SCSI_DEBUG is not set
> CONFIG_SCSI_PMCRAID=y
> CONFIG_SCSI_PM8001=y
> CONFIG_SCSI_SRP=y
> CONFIG_SCSI_BFA_FC=y
> CONFIG_SCSI_LOWLEVEL_PCMCIA=y
> CONFIG_PCMCIA_AHA152X=m
> CONFIG_PCMCIA_FDOMAIN=m
> CONFIG_PCMCIA_NINJA_SCSI=m
> CONFIG_PCMCIA_QLOGIC=m
> CONFIG_PCMCIA_SYM53C500=m
> CONFIG_SCSI_DH=y
> CONFIG_SCSI_DH_RDAC=y
> CONFIG_SCSI_DH_HP_SW=y
> CONFIG_SCSI_DH_EMC=y
> CONFIG_SCSI_DH_ALUA=y
> CONFIG_SCSI_OSD_INITIATOR=y
> CONFIG_SCSI_OSD_ULD=y
> CONFIG_SCSI_OSD_DPRINT_SENSE=1
> # CONFIG_SCSI_OSD_DEBUG is not set
> CONFIG_ATA=y
> # CONFIG_ATA_NONSTANDARD is not set
> CONFIG_ATA_VERBOSE_ERROR=y
> CONFIG_ATA_ACPI=y
> CONFIG_SATA_PMP=y
>
> #
> # Controllers with non-SFF native interface
> #
> CONFIG_SATA_AHCI=y
> CONFIG_SATA_AHCI_PLATFORM=y
> CONFIG_SATA_INIC162X=y
> CONFIG_SATA_ACARD_AHCI=y
> CONFIG_SATA_SIL24=y
> CONFIG_ATA_SFF=y
>
> #
> # SFF controllers with custom DMA interface
> #
> CONFIG_PDC_ADMA=y
> CONFIG_SATA_QSTOR=y
> CONFIG_SATA_SX4=y
> CONFIG_ATA_BMDMA=y
>
> #
> # SATA SFF controllers with BMDMA
> #
> CONFIG_ATA_PIIX=y
> CONFIG_SATA_MV=y
> CONFIG_SATA_NV=y
> CONFIG_SATA_PROMISE=y
> CONFIG_SATA_SIL=y
> CONFIG_SATA_SIS=y
> CONFIG_SATA_SVW=y
> CONFIG_SATA_ULI=y
> CONFIG_SATA_VIA=y
> CONFIG_SATA_VITESSE=y
>
> #
> # PATA SFF controllers with BMDMA
> #
> CONFIG_PATA_ALI=y
> CONFIG_PATA_AMD=y
> CONFIG_PATA_ARASAN_CF=y
> CONFIG_PATA_ARTOP=y
> CONFIG_PATA_ATIIXP=y
> CONFIG_PATA_ATP867X=y
> CONFIG_PATA_CMD64X=y
> CONFIG_PATA_CS5520=y
> CONFIG_PATA_CS5530=y
> CONFIG_PATA_CS5535=y
> CONFIG_PATA_CS5536=y
> CONFIG_PATA_CYPRESS=y
> CONFIG_PATA_EFAR=y
> CONFIG_PATA_HPT366=y
> CONFIG_PATA_HPT37X=y
> CONFIG_PATA_HPT3X2N=y
> CONFIG_PATA_HPT3X3=y
> CONFIG_PATA_HPT3X3_DMA=y
> CONFIG_PATA_IT8213=y
> CONFIG_PATA_IT821X=y
> CONFIG_PATA_JMICRON=y
> CONFIG_PATA_MARVELL=y
> CONFIG_PATA_NETCELL=y
> CONFIG_PATA_NINJA32=y
> CONFIG_PATA_NS87415=y
> CONFIG_PATA_OLDPIIX=y
> CONFIG_PATA_OPTIDMA=y
> CONFIG_PATA_PDC2027X=y
> CONFIG_PATA_PDC_OLD=y
> CONFIG_PATA_RADISYS=y
> CONFIG_PATA_RDC=y
> CONFIG_PATA_SC1200=y
> CONFIG_PATA_SCH=y
> CONFIG_PATA_SERVERWORKS=y
> CONFIG_PATA_SIL680=y
> CONFIG_PATA_SIS=y
> CONFIG_PATA_TOSHIBA=y
> CONFIG_PATA_TRIFLEX=y
> CONFIG_PATA_VIA=y
> CONFIG_PATA_WINBOND=y
>
> #
> # PIO-only SFF controllers
> #
> CONFIG_PATA_CMD640_PCI=y
> CONFIG_PATA_ISAPNP=y
> CONFIG_PATA_MPIIX=y
> CONFIG_PATA_NS87410=y
> CONFIG_PATA_OPTI=y
> CONFIG_PATA_PCMCIA=y
> CONFIG_PATA_QDI=y
> CONFIG_PATA_RZ1000=y
> CONFIG_PATA_WINBOND_VLB=y
>
> #
> # Generic fallback / legacy drivers
> #
> CONFIG_PATA_ACPI=y
> CONFIG_ATA_GENERIC=y
> CONFIG_PATA_LEGACY=y
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> CONFIG_MD_AUTODETECT=y
> CONFIG_MD_LINEAR=y
> CONFIG_MD_RAID0=y
> CONFIG_MD_RAID1=y
> CONFIG_MD_RAID10=y
> CONFIG_MD_RAID456=y
> CONFIG_MULTICORE_RAID456=y
> CONFIG_MD_MULTIPATH=y
> CONFIG_MD_FAULTY=y
> CONFIG_BLK_DEV_DM=y
> CONFIG_DM_DEBUG=y
> CONFIG_DM_CRYPT=y
> CONFIG_DM_SNAPSHOT=y
> CONFIG_DM_MIRROR=y
> CONFIG_DM_RAID=y
> # CONFIG_DM_LOG_USERSPACE is not set
> CONFIG_DM_ZERO=y
> CONFIG_DM_MULTIPATH=y
> CONFIG_DM_MULTIPATH_QL=y
> CONFIG_DM_MULTIPATH_ST=y
> # CONFIG_DM_DELAY is not set
> CONFIG_DM_UEVENT=y
> # CONFIG_DM_FLAKEY is not set
> # CONFIG_TARGET_CORE is not set
> CONFIG_FUSION=y
> CONFIG_FUSION_SPI=y
> CONFIG_FUSION_FC=y
> CONFIG_FUSION_SAS=y
> CONFIG_FUSION_MAX_SGE=40
> CONFIG_FUSION_CTL=y
> CONFIG_FUSION_LAN=y
> CONFIG_FUSION_LOGGING=y
>
> #
> # IEEE 1394 (FireWire) support
> #
> CONFIG_FIREWIRE=y
> CONFIG_FIREWIRE_OHCI=y
> CONFIG_FIREWIRE_OHCI_DEBUG=y
> CONFIG_FIREWIRE_SBP2=y
> CONFIG_FIREWIRE_NET=y
> # CONFIG_FIREWIRE_NOSY is not set
> CONFIG_I2O=y
> # CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
> CONFIG_I2O_EXT_ADAPTEC=y
> CONFIG_I2O_EXT_ADAPTEC_DMA64=y
> CONFIG_I2O_CONFIG=y
> CONFIG_I2O_CONFIG_OLD_IOCTL=y
> CONFIG_I2O_BUS=y
> CONFIG_I2O_BLOCK=y
> CONFIG_I2O_SCSI=y
> CONFIG_I2O_PROC=y
> # CONFIG_MACINTOSH_DRIVERS is not set
> CONFIG_NETDEVICES=y
> CONFIG_IFB=y
> CONFIG_DUMMY=y
> CONFIG_BONDING=y
> CONFIG_MACVLAN=y
> # CONFIG_MACVTAP is not set
> CONFIG_EQUALIZER=y
> CONFIG_TUN=y
> CONFIG_VETH=y
> CONFIG_NET_SB1000=y
> # CONFIG_ARCNET is not set
> CONFIG_MII=y
> CONFIG_PHYLIB=y
>
> #
> # MII PHY device drivers
> #
> CONFIG_MARVELL_PHY=y
> CONFIG_DAVICOM_PHY=y
> CONFIG_QSEMI_PHY=y
> CONFIG_LXT_PHY=y
> CONFIG_CICADA_PHY=y
> CONFIG_VITESSE_PHY=y
> CONFIG_SMSC_PHY=y
> CONFIG_BROADCOM_PHY=y
> # CONFIG_BCM63XX_PHY is not set
> CONFIG_ICPLUS_PHY=y
> CONFIG_REALTEK_PHY=y
> # CONFIG_NATIONAL_PHY is not set
> # CONFIG_STE10XP is not set
> # CONFIG_LSI_ET1011C_PHY is not set
> # CONFIG_MICREL_PHY is not set
> # CONFIG_FIXED_PHY is not set
> CONFIG_MDIO_BITBANG=y
> # CONFIG_MDIO_GPIO is not set
> CONFIG_NET_ETHERNET=y
> CONFIG_HAPPYMEAL=y
> CONFIG_SUNGEM=y
> CONFIG_CASSINI=y
> CONFIG_NET_VENDOR_3COM=y
> CONFIG_EL1=y
> CONFIG_EL2=y
> CONFIG_ELPLUS=y
> CONFIG_EL16=y
> CONFIG_EL3=y
> CONFIG_3C515=y
> CONFIG_VORTEX=y
> CONFIG_TYPHOON=y
> CONFIG_LANCE=y
> CONFIG_NET_VENDOR_SMC=y
> CONFIG_WD80x3=y
> CONFIG_ULTRA=y
> CONFIG_SMC9194=y
> CONFIG_ETHOC=y
> CONFIG_NET_VENDOR_RACAL=y
> CONFIG_NI52=y
> CONFIG_NI65=y
> CONFIG_DNET=y
> CONFIG_NET_TULIP=y
> CONFIG_DE2104X=y
> CONFIG_DE2104X_DSL=0
> CONFIG_TULIP=y
> # CONFIG_TULIP_MWI is not set
> CONFIG_TULIP_MMIO=y
> # CONFIG_TULIP_NAPI is not set
> CONFIG_DE4X5=y
> CONFIG_WINBOND_840=y
> CONFIG_DM9102=y
> CONFIG_ULI526X=y
> CONFIG_PCMCIA_XIRCOM=y
> CONFIG_AT1700=y
> CONFIG_DEPCA=y
> CONFIG_HP100=y
> CONFIG_NET_ISA=y
> CONFIG_E2100=y
> CONFIG_EWRK3=y
> CONFIG_EEXPRESS=y
> CONFIG_EEXPRESS_PRO=y
> CONFIG_HPLAN_PLUS=y
> CONFIG_HPLAN=y
> CONFIG_LP486E=y
> CONFIG_ETH16I=y
> CONFIG_NE2000=y
> CONFIG_ZNET=y
> CONFIG_SEEQ8005=y
> # CONFIG_IBM_NEW_EMAC_ZMII is not set
> # CONFIG_IBM_NEW_EMAC_RGMII is not set
> # CONFIG_IBM_NEW_EMAC_TAH is not set
> # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
> # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
> # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
> # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
> CONFIG_NET_PCI=y
> CONFIG_PCNET32=y
> CONFIG_AMD8111_ETH=y
> CONFIG_ADAPTEC_STARFIRE=y
> CONFIG_AC3200=y
> CONFIG_KSZ884X_PCI=y
> CONFIG_APRICOT=y
> CONFIG_B44=y
> CONFIG_B44_PCI_AUTOSELECT=y
> CONFIG_B44_PCICORE_AUTOSELECT=y
> CONFIG_B44_PCI=y
> CONFIG_FORCEDETH=y
> CONFIG_CS89x0=y
> CONFIG_E100=y
> CONFIG_FEALNX=y
> CONFIG_NATSEMI=y
> CONFIG_NE2K_PCI=y
> CONFIG_8139CP=y
> CONFIG_8139TOO=y
> # CONFIG_8139TOO_PIO is not set
> # CONFIG_8139TOO_TUNE_TWISTER is not set
> CONFIG_8139TOO_8129=y
> # CONFIG_8139_OLD_RX_RESET is not set
> CONFIG_R6040=y
> CONFIG_SIS900=y
> CONFIG_EPIC100=y
> # CONFIG_SMSC9420 is not set
> CONFIG_SUNDANCE=y
> # CONFIG_SUNDANCE_MMIO is not set
> CONFIG_TLAN=y
> CONFIG_KS8842=y
> CONFIG_KS8851_MLL=y
> CONFIG_VIA_RHINE=y
> CONFIG_VIA_RHINE_MMIO=y
> CONFIG_SC92031=y
> CONFIG_NET_POCKET=y
> CONFIG_ATP=y
> CONFIG_DE600=y
> CONFIG_DE620=y
> CONFIG_ATL2=y
> CONFIG_NETDEV_1000=y
> CONFIG_ACENIC=y
> # CONFIG_ACENIC_OMIT_TIGON_I is not set
> CONFIG_DL2K=y
> CONFIG_E1000=y
> CONFIG_E1000E=y
> CONFIG_IP1000=y
> CONFIG_IGB=y
> CONFIG_IGB_DCA=y
> CONFIG_IGBVF=y
> CONFIG_NS83820=y
> CONFIG_HAMACHI=y
> CONFIG_YELLOWFIN=y
> CONFIG_R8169=y
> CONFIG_SIS190=y
> CONFIG_SKGE=y
> CONFIG_SKY2=y
> CONFIG_VIA_VELOCITY=y
> CONFIG_TIGON3=y
> CONFIG_BNX2=y
> CONFIG_CNIC=y
> CONFIG_QLA3XXX=y
> CONFIG_ATL1=y
> CONFIG_ATL1E=y
> CONFIG_ATL1C=y
> CONFIG_JME=y
> CONFIG_STMMAC_ETH=y
> # CONFIG_STMMAC_DA is not set
> # CONFIG_STMMAC_DUAL_MAC is not set
> CONFIG_PCH_GBE=y
> CONFIG_NETDEV_10000=y
> CONFIG_MDIO=y
> CONFIG_CHELSIO_T1=y
> CONFIG_CHELSIO_T1_1G=y
> CONFIG_CHELSIO_T3=y
> # CONFIG_CHELSIO_T4 is not set
> # CONFIG_CHELSIO_T4VF is not set
> CONFIG_ENIC=y
> CONFIG_IXGBE=y
> CONFIG_IXGBE_DCA=y
> CONFIG_IXGBEVF=y
> CONFIG_IXGB=y
> CONFIG_S2IO=y
> CONFIG_VXGE=y
> # CONFIG_VXGE_DEBUG_TRACE_ALL is not set
> CONFIG_MYRI10GE=y
> CONFIG_MYRI10GE_DCA=y
> CONFIG_NETXEN_NIC=y
> CONFIG_NIU=y
> CONFIG_MLX4_EN=y
> CONFIG_MLX4_CORE=y
> CONFIG_MLX4_DEBUG=y
> CONFIG_TEHUTI=y
> CONFIG_BNX2X=y
> CONFIG_QLCNIC=y
> CONFIG_QLGE=y
> CONFIG_BNA=y
> CONFIG_SFC=y
> CONFIG_SFC_MTD=y
> CONFIG_BE2NET=y
> CONFIG_TR=y
> # CONFIG_IBMTR is not set
> CONFIG_IBMOL=y
> CONFIG_IBMLS=y
> CONFIG_3C359=y
> CONFIG_TMS380TR=y
> CONFIG_TMSPCI=y
> CONFIG_SKISA=y
> CONFIG_PROTEON=y
> CONFIG_ABYSS=y
> CONFIG_SMCTR=y
> # CONFIG_WLAN is not set
>
> #
> # Enable WiMAX (Networking options) to see the WiMAX drivers
> #
>
> #
> # USB Network Adapters
> #
> CONFIG_USB_CATC=y
> CONFIG_USB_KAWETH=y
> CONFIG_USB_PEGASUS=y
> CONFIG_USB_RTL8150=y
> CONFIG_USB_USBNET=y
> CONFIG_USB_NET_AX8817X=y
> CONFIG_USB_NET_CDCETHER=y
> CONFIG_USB_NET_CDC_EEM=y
> CONFIG_USB_NET_CDC_NCM=y
> CONFIG_USB_NET_DM9601=y
> # CONFIG_USB_NET_SMSC75XX is not set
> CONFIG_USB_NET_SMSC95XX=y
> CONFIG_USB_NET_GL620A=y
> CONFIG_USB_NET_NET1080=y
> CONFIG_USB_NET_PLUSB=y
> CONFIG_USB_NET_MCS7830=y
> CONFIG_USB_NET_RNDIS_HOST=y
> CONFIG_USB_NET_CDC_SUBSET=y
> CONFIG_USB_ALI_M5632=y
> CONFIG_USB_AN2720=y
> CONFIG_USB_BELKIN=y
> CONFIG_USB_ARMLINUX=y
> CONFIG_USB_EPSON2888=y
> CONFIG_USB_KC2190=y
> CONFIG_USB_NET_ZAURUS=y
> # CONFIG_USB_NET_CX82310_ETH is not set
> CONFIG_USB_NET_INT51X1=y
> # CONFIG_USB_IPHETH is not set
> # CONFIG_USB_SIERRA_NET is not set
> # CONFIG_USB_VL600 is not set
> CONFIG_NET_PCMCIA=y
> CONFIG_PCMCIA_3C589=y
> CONFIG_PCMCIA_3C574=y
> CONFIG_PCMCIA_FMVJ18X=y
> CONFIG_PCMCIA_PCNET=y
> CONFIG_PCMCIA_NMCLAN=y
> CONFIG_PCMCIA_SMC91C92=y
> CONFIG_PCMCIA_XIRC2PS=y
> CONFIG_PCMCIA_AXNET=y
> CONFIG_PCMCIA_IBMTR=y
> # CONFIG_WAN is not set
>
> #
> # CAIF transport drivers
> #
> CONFIG_XEN_NETDEV_FRONTEND=y
> CONFIG_XEN_NETDEV_BACKEND=y
> CONFIG_FDDI=y
> CONFIG_DEFXX=y
> # CONFIG_DEFXX_MMIO is not set
> CONFIG_SKFP=y
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> CONFIG_PPP=y
> CONFIG_PPP_MULTILINK=y
> CONFIG_PPP_FILTER=y
> CONFIG_PPP_ASYNC=y
> CONFIG_PPP_SYNC_TTY=y
> CONFIG_PPP_DEFLATE=y
> # CONFIG_PPP_BSDCOMP is not set
> CONFIG_PPP_MPPE=y
> CONFIG_PPPOE=y
> # CONFIG_SLIP is not set
> CONFIG_SLHC=y
> CONFIG_NET_FC=y
> CONFIG_NETCONSOLE=y
> CONFIG_NETCONSOLE_DYNAMIC=y
> CONFIG_NETPOLL=y
> CONFIG_NETPOLL_TRAP=y
> CONFIG_NET_POLL_CONTROLLER=y
> CONFIG_VIRTIO_NET=y
> # CONFIG_VMXNET3 is not set
> # CONFIG_ISDN is not set
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
> CONFIG_INPUT_FF_MEMLESS=y
> CONFIG_INPUT_POLLDEV=y
> CONFIG_INPUT_SPARSEKMAP=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> # CONFIG_KEYBOARD_ADP5588 is not set
> # CONFIG_KEYBOARD_ADP5589 is not set
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_QT1070 is not set
> # CONFIG_KEYBOARD_QT2160 is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_GPIO is not set
> # CONFIG_KEYBOARD_GPIO_POLLED is not set
> # CONFIG_KEYBOARD_TCA6416 is not set
> # CONFIG_KEYBOARD_MATRIX is not set
> # CONFIG_KEYBOARD_LM8323 is not set
> # CONFIG_KEYBOARD_MAX7359 is not set
> # CONFIG_KEYBOARD_MCS is not set
> # CONFIG_KEYBOARD_MPR121 is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_OPENCORES is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> CONFIG_MOUSE_PS2_ALPS=y
> CONFIG_MOUSE_PS2_LOGIPS2PP=y
> CONFIG_MOUSE_PS2_SYNAPTICS=y
> CONFIG_MOUSE_PS2_LIFEBOOK=y
> CONFIG_MOUSE_PS2_TRACKPOINT=y
> # CONFIG_MOUSE_PS2_ELANTECH is not set
> # CONFIG_MOUSE_PS2_SENTELIC is not set
> # CONFIG_MOUSE_PS2_TOUCHKIT is not set
> CONFIG_MOUSE_SERIAL=y
> CONFIG_MOUSE_APPLETOUCH=y
> CONFIG_MOUSE_BCM5974=y
> # CONFIG_MOUSE_INPORT is not set
> # CONFIG_MOUSE_LOGIBM is not set
> # CONFIG_MOUSE_PC110PAD is not set
> CONFIG_MOUSE_VSXXXAA=y
> # CONFIG_MOUSE_GPIO is not set
> CONFIG_MOUSE_SYNAPTICS_I2C=y
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TABLET is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> CONFIG_INPUT_MISC=y
> # CONFIG_INPUT_AD714X is not set
> CONFIG_INPUT_PCSPKR=y
> # CONFIG_INPUT_APANEL is not set
> # CONFIG_INPUT_WISTRON_BTNS is not set
> # CONFIG_INPUT_ATLAS_BTNS is not set
> # CONFIG_INPUT_ATI_REMOTE is not set
> # CONFIG_INPUT_ATI_REMOTE2 is not set
> # CONFIG_INPUT_KEYSPAN_REMOTE is not set
> # CONFIG_INPUT_POWERMATE is not set
> # CONFIG_INPUT_YEALINK is not set
> # CONFIG_INPUT_CM109 is not set
> # CONFIG_INPUT_UINPUT is not set
> # CONFIG_INPUT_PCF8574 is not set
> # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
> # CONFIG_INPUT_ADXL34X is not set
> # CONFIG_INPUT_CMA3000 is not set
>
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=y
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PARKBD is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> CONFIG_SERIO_RAW=y
> # CONFIG_SERIO_ALTERA_PS2 is not set
> # CONFIG_SERIO_PS2MULT is not set
> # CONFIG_GAMEPORT is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_CONSOLE_TRANSLATIONS=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> CONFIG_VT_HW_CONSOLE_BINDING=y
> CONFIG_UNIX98_PTYS=y
> # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
> # CONFIG_LEGACY_PTYS is not set
> # CONFIG_SERIAL_NONSTANDARD is not set
> CONFIG_NOZOMI=y
> # CONFIG_N_GSM is not set
> # CONFIG_TRACE_SINK is not set
> # CONFIG_DEVKMEM is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_FIX_EARLYCON_MEM=y
> CONFIG_SERIAL_8250_PCI=y
> CONFIG_SERIAL_8250_PNP=y
> CONFIG_SERIAL_8250_CS=y
> CONFIG_SERIAL_8250_NR_UARTS=32
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> CONFIG_SERIAL_8250_EXTENDED=y
> CONFIG_SERIAL_8250_MANY_PORTS=y
> # CONFIG_SERIAL_8250_FOURPORT is not set
> # CONFIG_SERIAL_8250_ACCENT is not set
> # CONFIG_SERIAL_8250_BOCA is not set
> # CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
> # CONFIG_SERIAL_8250_HUB6 is not set
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> CONFIG_SERIAL_8250_DETECT_IRQ=y
> CONFIG_SERIAL_8250_RSA=y
>
> #
> # Non-8250 serial port support
> #
> # CONFIG_SERIAL_MFD_HSU is not set
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_SERIAL_JSM=y
> # CONFIG_SERIAL_TIMBERDALE is not set
> # CONFIG_SERIAL_ALTERA_JTAGUART is not set
> # CONFIG_SERIAL_ALTERA_UART is not set
> # CONFIG_SERIAL_PCH_UART is not set
> # CONFIG_SERIAL_XILINX_PS_UART is not set
> # CONFIG_PRINTER is not set
> # CONFIG_PPDEV is not set
> CONFIG_HVC_DRIVER=y
> CONFIG_HVC_IRQ=y
> CONFIG_HVC_XEN=y
> CONFIG_VIRTIO_CONSOLE=y
> CONFIG_IPMI_HANDLER=y
> # CONFIG_IPMI_PANIC_EVENT is not set
> CONFIG_IPMI_DEVICE_INTERFACE=y
> CONFIG_IPMI_SI=y
> CONFIG_IPMI_WATCHDOG=y
> CONFIG_IPMI_POWEROFF=y
> CONFIG_HW_RANDOM=y
> CONFIG_HW_RANDOM_TIMERIOMEM=y
> CONFIG_HW_RANDOM_INTEL=y
> CONFIG_HW_RANDOM_AMD=y
> CONFIG_HW_RANDOM_GEODE=y
> CONFIG_HW_RANDOM_VIA=y
> CONFIG_HW_RANDOM_VIRTIO=y
> CONFIG_NVRAM=y
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
>
> #
> # PCMCIA character devices
> #
> # CONFIG_SYNCLINK_CS is not set
> CONFIG_CARDMAN_4000=y
> CONFIG_CARDMAN_4040=y
> CONFIG_IPWIRELESS=y
> # CONFIG_MWAVE is not set
> # CONFIG_PC8736x_GPIO is not set
> # CONFIG_NSC_GPIO is not set
> CONFIG_RAW_DRIVER=y
> CONFIG_MAX_RAW_DEVS=8192
> CONFIG_HPET=y
> # CONFIG_HPET_MMAP is not set
> CONFIG_HANGCHECK_TIMER=y
> CONFIG_TCG_TPM=y
> CONFIG_TCG_TIS=y
> CONFIG_TCG_NSC=y
> CONFIG_TCG_ATMEL=y
> CONFIG_TCG_INFINEON=y
> # CONFIG_TELCLOCK is not set
> CONFIG_DEVPORT=y
> # CONFIG_RAMOOPS is not set
> CONFIG_I2C=y
> CONFIG_I2C_BOARDINFO=y
> CONFIG_I2C_COMPAT=y
> CONFIG_I2C_CHARDEV=y
> # CONFIG_I2C_MUX is not set
> CONFIG_I2C_HELPER_AUTO=y
> CONFIG_I2C_SMBUS=y
> CONFIG_I2C_ALGOBIT=y
> CONFIG_I2C_ALGOPCA=y
>
> #
> # I2C Hardware Bus support
> #
>
> #
> # PC SMBus host controller drivers
> #
> CONFIG_I2C_ALI1535=y
> CONFIG_I2C_ALI1563=y
> CONFIG_I2C_ALI15X3=y
> CONFIG_I2C_AMD756=y
> # CONFIG_I2C_AMD756_S4882 is not set
> CONFIG_I2C_AMD8111=y
> CONFIG_I2C_I801=y
> CONFIG_I2C_ISCH=y
> CONFIG_I2C_PIIX4=y
> CONFIG_I2C_NFORCE2=y
> # CONFIG_I2C_NFORCE2_S4985 is not set
> CONFIG_I2C_SIS5595=y
> CONFIG_I2C_SIS630=y
> CONFIG_I2C_SIS96X=y
> CONFIG_I2C_VIA=y
> CONFIG_I2C_VIAPRO=y
>
> #
> # ACPI drivers
> #
> # CONFIG_I2C_SCMI is not set
>
> #
> # I2C system bus drivers (mostly embedded / system-on-chip)
> #
> # CONFIG_I2C_GPIO is not set
> # CONFIG_I2C_INTEL_MID is not set
> # CONFIG_I2C_OCORES is not set
> CONFIG_I2C_PCA_PLATFORM=y
> # CONFIG_I2C_PXA_PCI is not set
> CONFIG_I2C_SIMTEC=y
> # CONFIG_I2C_XILINX is not set
> # CONFIG_I2C_EG20T is not set
>
> #
> # External I2C/SMBus adapter drivers
> #
> # CONFIG_I2C_DIOLAN_U2C is not set
> CONFIG_I2C_PARPORT=y
> CONFIG_I2C_PARPORT_LIGHT=y
> # CONFIG_I2C_TAOS_EVM is not set
> CONFIG_I2C_TINY_USB=y
>
> #
> # Other I2C/SMBus bus drivers
> #
> CONFIG_I2C_PCA_ISA=y
> # CONFIG_I2C_STUB is not set
> # CONFIG_SCx200_ACB is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_SPI is not set
>
> #
> # PPS support
> #
> # CONFIG_PPS is not set
>
> #
> # PPS generators support
> #
>
> #
> # PTP clock support
> #
>
> #
> # Enable Device Drivers -> PPS to see the PTP clock options.
> #
> CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
> CONFIG_GPIOLIB=y
> # CONFIG_GPIO_SYSFS is not set
>
> #
> # Memory mapped GPIO drivers:
> #
> # CONFIG_GPIO_BASIC_MMIO is not set
> # CONFIG_GPIO_IT8761E is not set
> # CONFIG_GPIO_SCH is not set
> # CONFIG_GPIO_VX855 is not set
>
> #
> # I2C GPIO expanders:
> #
> # CONFIG_GPIO_MAX7300 is not set
> # CONFIG_GPIO_MAX732X is not set
> # CONFIG_GPIO_PCA953X is not set
> # CONFIG_GPIO_PCF857X is not set
> # CONFIG_GPIO_SX150X is not set
> # CONFIG_GPIO_ADP5588 is not set
>
> #
> # PCI GPIO expanders:
> #
> # CONFIG_GPIO_BT8XX is not set
> # CONFIG_GPIO_LANGWELL is not set
> # CONFIG_GPIO_PCH is not set
> # CONFIG_GPIO_ML_IOH is not set
> # CONFIG_GPIO_RDC321X is not set
>
> #
> # SPI GPIO expanders:
> #
>
> #
> # AC97 GPIO expanders:
> #
>
> #
> # MODULbus GPIO expanders:
> #
> # CONFIG_W1 is not set
> CONFIG_POWER_SUPPLY=y
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> # CONFIG_PDA_POWER is not set
> # CONFIG_TEST_POWER is not set
> # CONFIG_BATTERY_DS2780 is not set
> # CONFIG_BATTERY_DS2782 is not set
> # CONFIG_BATTERY_BQ20Z75 is not set
> CONFIG_BATTERY_BQ27x00=y
> CONFIG_BATTERY_BQ27X00_I2C=y
> CONFIG_BATTERY_BQ27X00_PLATFORM=y
> # CONFIG_BATTERY_MAX17040 is not set
> # CONFIG_BATTERY_MAX17042 is not set
> # CONFIG_CHARGER_ISP1704 is not set
> # CONFIG_CHARGER_MAX8903 is not set
> # CONFIG_CHARGER_GPIO is not set
> CONFIG_HWMON=y
> CONFIG_HWMON_VID=y
> # CONFIG_HWMON_DEBUG_CHIP is not set
>
> #
> # Native drivers
> #
> CONFIG_SENSORS_ABITUGURU=y
> CONFIG_SENSORS_ABITUGURU3=y
> CONFIG_SENSORS_AD7414=y
> CONFIG_SENSORS_AD7418=y
> CONFIG_SENSORS_ADM1021=y
> CONFIG_SENSORS_ADM1025=y
> CONFIG_SENSORS_ADM1026=y
> CONFIG_SENSORS_ADM1029=y
> CONFIG_SENSORS_ADM1031=y
> CONFIG_SENSORS_ADM9240=y
> CONFIG_SENSORS_ADT7411=y
> CONFIG_SENSORS_ADT7462=y
> CONFIG_SENSORS_ADT7470=y
> CONFIG_SENSORS_ADT7475=y
> CONFIG_SENSORS_ASC7621=y
> CONFIG_SENSORS_K8TEMP=y
> CONFIG_SENSORS_K10TEMP=y
> CONFIG_SENSORS_FAM15H_POWER=y
> CONFIG_SENSORS_ASB100=y
> CONFIG_SENSORS_ATXP1=y
> CONFIG_SENSORS_DS620=y
> CONFIG_SENSORS_DS1621=y
> CONFIG_SENSORS_I5K_AMB=y
> CONFIG_SENSORS_F71805F=y
> CONFIG_SENSORS_F71882FG=y
> CONFIG_SENSORS_F75375S=y
> CONFIG_SENSORS_FSCHMD=y
> CONFIG_SENSORS_G760A=y
> CONFIG_SENSORS_GL518SM=y
> CONFIG_SENSORS_GL520SM=y
> CONFIG_SENSORS_GPIO_FAN=y
> CONFIG_SENSORS_CORETEMP=y
> CONFIG_SENSORS_IBMAEM=y
> CONFIG_SENSORS_IBMPEX=y
> CONFIG_SENSORS_IT87=y
> CONFIG_SENSORS_JC42=y
> CONFIG_SENSORS_LINEAGE=y
> CONFIG_SENSORS_LM63=y
> CONFIG_SENSORS_LM73=y
> CONFIG_SENSORS_LM75=y
> CONFIG_SENSORS_LM77=y
> CONFIG_SENSORS_LM78=y
> CONFIG_SENSORS_LM80=y
> CONFIG_SENSORS_LM83=y
> CONFIG_SENSORS_LM85=y
> CONFIG_SENSORS_LM87=y
> CONFIG_SENSORS_LM90=y
> CONFIG_SENSORS_LM92=y
> CONFIG_SENSORS_LM93=y
> CONFIG_SENSORS_LTC4151=y
> CONFIG_SENSORS_LTC4215=y
> CONFIG_SENSORS_LTC4245=y
> CONFIG_SENSORS_LTC4261=y
> CONFIG_SENSORS_LM95241=y
> CONFIG_SENSORS_MAX16065=y
> CONFIG_SENSORS_MAX1619=y
> CONFIG_SENSORS_MAX6639=y
> CONFIG_SENSORS_MAX6642=y
> CONFIG_SENSORS_MAX6650=y
> CONFIG_SENSORS_PC87360=y
> CONFIG_SENSORS_PC87427=y
> CONFIG_SENSORS_PCF8591=y
> CONFIG_PMBUS=y
> CONFIG_SENSORS_PMBUS=y
> CONFIG_SENSORS_ADM1275=y
> CONFIG_SENSORS_MAX16064=y
> CONFIG_SENSORS_MAX34440=y
> CONFIG_SENSORS_MAX8688=y
> CONFIG_SENSORS_UCD9000=y
> CONFIG_SENSORS_UCD9200=y
> CONFIG_SENSORS_SHT15=y
> CONFIG_SENSORS_SHT21=y
> CONFIG_SENSORS_SIS5595=y
> CONFIG_SENSORS_SMM665=y
> CONFIG_SENSORS_DME1737=y
> CONFIG_SENSORS_EMC1403=y
> CONFIG_SENSORS_EMC2103=y
> CONFIG_SENSORS_EMC6W201=y
> CONFIG_SENSORS_SMSC47M1=y
> CONFIG_SENSORS_SMSC47M192=y
> CONFIG_SENSORS_SMSC47B397=y
> CONFIG_SENSORS_SCH5627=y
> CONFIG_SENSORS_ADS1015=y
> CONFIG_SENSORS_ADS7828=y
> CONFIG_SENSORS_AMC6821=y
> CONFIG_SENSORS_THMC50=y
> CONFIG_SENSORS_TMP102=y
> CONFIG_SENSORS_TMP401=y
> CONFIG_SENSORS_TMP421=y
> CONFIG_SENSORS_VIA_CPUTEMP=y
> CONFIG_SENSORS_VIA686A=y
> CONFIG_SENSORS_VT1211=y
> CONFIG_SENSORS_VT8231=y
> CONFIG_SENSORS_W83781D=y
> CONFIG_SENSORS_W83791D=y
> CONFIG_SENSORS_W83792D=y
> CONFIG_SENSORS_W83793=y
> CONFIG_SENSORS_W83795=y
> # CONFIG_SENSORS_W83795_FANCTRL is not set
> CONFIG_SENSORS_W83L785TS=y
> CONFIG_SENSORS_W83L786NG=y
> CONFIG_SENSORS_W83627HF=y
> CONFIG_SENSORS_W83627EHF=y
> CONFIG_SENSORS_APPLESMC=y
>
> #
> # ACPI drivers
> #
> CONFIG_SENSORS_ACPI_POWER=y
> CONFIG_SENSORS_ATK0110=y
> CONFIG_THERMAL=y
> CONFIG_THERMAL_HWMON=y
> # CONFIG_WATCHDOG is not set
> CONFIG_SSB_POSSIBLE=y
>
> #
> # Sonics Silicon Backplane
> #
> CONFIG_SSB=y
> CONFIG_SSB_SPROM=y
> CONFIG_SSB_PCIHOST_POSSIBLE=y
> CONFIG_SSB_PCIHOST=y
> # CONFIG_SSB_B43_PCI_BRIDGE is not set
> CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
> # CONFIG_SSB_PCMCIAHOST is not set
> # CONFIG_SSB_DEBUG is not set
> CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
> CONFIG_SSB_DRIVER_PCICORE=y
> CONFIG_BCMA_POSSIBLE=y
>
> #
> # Broadcom specific AMBA
> #
> # CONFIG_BCMA is not set
> CONFIG_MFD_SUPPORT=y
> CONFIG_MFD_CORE=y
> # CONFIG_MFD_88PM860X is not set
> # CONFIG_MFD_SM501 is not set
> # CONFIG_HTC_PASIC3 is not set
> # CONFIG_HTC_I2CPLD is not set
> # CONFIG_TPS6105X is not set
> # CONFIG_TPS65010 is not set
> # CONFIG_TPS6507X is not set
> # CONFIG_MFD_TPS6586X is not set
> # CONFIG_TWL4030_CORE is not set
> # CONFIG_MFD_STMPE is not set
> # CONFIG_MFD_TC3589X is not set
> # CONFIG_MFD_TMIO is not set
> # CONFIG_PMIC_DA903X is not set
> # CONFIG_PMIC_ADP5520 is not set
> # CONFIG_MFD_MAX8925 is not set
> # CONFIG_MFD_MAX8997 is not set
> # CONFIG_MFD_MAX8998 is not set
> # CONFIG_MFD_WM8400 is not set
> # CONFIG_MFD_WM831X_I2C is not set
> # CONFIG_MFD_WM8350_I2C is not set
> # CONFIG_MFD_WM8994 is not set
> # CONFIG_MFD_PCF50633 is not set
> # CONFIG_ABX500_CORE is not set
> # CONFIG_MFD_CS5535 is not set
> # CONFIG_MFD_TIMBERDALE is not set
> CONFIG_LPC_SCH=y
> # CONFIG_MFD_RDC321X is not set
> # CONFIG_MFD_JANZ_CMODIO is not set
> # CONFIG_MFD_VX855 is not set
> # CONFIG_MFD_WL1273_CORE is not set
> # CONFIG_MFD_TPS65910 is not set
> # CONFIG_REGULATOR is not set
> # CONFIG_MEDIA_SUPPORT is not set
>
> #
> # Graphics support
> #
> # CONFIG_AGP is not set
> CONFIG_VGA_ARB=y
> CONFIG_VGA_ARB_MAX_GPUS=16
> # CONFIG_VGA_SWITCHEROO is not set
> # CONFIG_DRM is not set
> # CONFIG_STUB_POULSBO is not set
> # CONFIG_VGASTATE is not set
> CONFIG_VIDEO_OUTPUT_CONTROL=y
> # CONFIG_FB is not set
> # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
>
> #
> # Display device support
> #
> CONFIG_DISPLAY_SUPPORT=y
>
> #
> # Display hardware drivers
> #
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_VGACON_SOFT_SCROLLBACK=y
> CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
> # CONFIG_MDA_CONSOLE is not set
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FONT_8x16=y
> # CONFIG_SOUND is not set
> CONFIG_HID_SUPPORT=y
> CONFIG_HID=y
> # CONFIG_HIDRAW is not set
>
> #
> # USB Input Devices
> #
> CONFIG_USB_HID=y
> # CONFIG_HID_PID is not set
> # CONFIG_USB_HIDDEV is not set
>
> #
> # Special HID drivers
> #
> CONFIG_HID_A4TECH=y
> # CONFIG_HID_ACRUX is not set
> CONFIG_HID_APPLE=y
> CONFIG_HID_BELKIN=y
> CONFIG_HID_CHERRY=y
> CONFIG_HID_CHICONY=y
> CONFIG_HID_CYPRESS=y
> # CONFIG_HID_DRAGONRISE is not set
> # CONFIG_HID_EMS_FF is not set
> CONFIG_HID_EZKEY=y
> # CONFIG_HID_KEYTOUCH is not set
> CONFIG_HID_KYE=y
> # CONFIG_HID_UCLOGIC is not set
> # CONFIG_HID_WALTOP is not set
> # CONFIG_HID_GYRATION is not set
> # CONFIG_HID_TWINHAN is not set
> CONFIG_HID_KENSINGTON=y
> # CONFIG_HID_LCPOWER is not set
> CONFIG_HID_LOGITECH=y
> # CONFIG_LOGITECH_FF is not set
> # CONFIG_LOGIRUMBLEPAD2_FF is not set
> # CONFIG_LOGIG940_FF is not set
> # CONFIG_LOGIWII_FF is not set
> CONFIG_HID_MICROSOFT=y
> CONFIG_HID_MONTEREY=y
> # CONFIG_HID_MULTITOUCH is not set
> # CONFIG_HID_NTRIG is not set
> # CONFIG_HID_ORTEK is not set
> # CONFIG_HID_PANTHERLORD is not set
> # CONFIG_HID_PETALYNX is not set
> # CONFIG_HID_PICOLCD is not set
> # CONFIG_HID_QUANTA is not set
> # CONFIG_HID_ROCCAT is not set
> # CONFIG_HID_ROCCAT_ARVO is not set
> # CONFIG_HID_ROCCAT_KONE is not set
> # CONFIG_HID_ROCCAT_KONEPLUS is not set
> # CONFIG_HID_ROCCAT_KOVAPLUS is not set
> # CONFIG_HID_ROCCAT_PYRA is not set
> # CONFIG_HID_SAMSUNG is not set
> # CONFIG_HID_SONY is not set
> # CONFIG_HID_SUNPLUS is not set
> # CONFIG_HID_GREENASIA is not set
> # CONFIG_HID_SMARTJOYPLUS is not set
> # CONFIG_HID_TOPSEED is not set
> # CONFIG_HID_THRUSTMASTER is not set
> # CONFIG_HID_ZEROPLUS is not set
> # CONFIG_HID_ZYDACRON is not set
> CONFIG_USB_SUPPORT=y
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB_ARCH_HAS_EHCI=y
> CONFIG_USB=y
> # CONFIG_USB_DEBUG is not set
> CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
>
> #
> # Miscellaneous USB options
> #
> # CONFIG_USB_DEVICEFS is not set
> # CONFIG_USB_DEVICE_CLASS is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
> CONFIG_USB_MON=y
> # CONFIG_USB_WUSB is not set
> # CONFIG_USB_WUSB_CBAF is not set
>
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_C67X00_HCD is not set
> CONFIG_USB_XHCI_HCD=y
> # CONFIG_USB_XHCI_HCD_DEBUGGING is not set
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_EHCI_ROOT_HUB_TT=y
> CONFIG_USB_EHCI_TT_NEWSCHED=y
> CONFIG_USB_OXU210HP_HCD=y
> CONFIG_USB_ISP116X_HCD=y
> CONFIG_USB_ISP1760_HCD=y
> CONFIG_USB_ISP1362_HCD=y
> CONFIG_USB_OHCI_HCD=y
> # CONFIG_USB_OHCI_HCD_SSB is not set
> # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
> # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> CONFIG_USB_UHCI_HCD=y
> CONFIG_USB_SL811_HCD=y
> # CONFIG_USB_SL811_HCD_ISO is not set
> # CONFIG_USB_SL811_CS is not set
> CONFIG_USB_R8A66597_HCD=y
> # CONFIG_USB_WHCI_HCD is not set
> # CONFIG_USB_HWA_HCD is not set
>
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
> # CONFIG_USB_WDM is not set
> # CONFIG_USB_TMC is not set
>
> #
> # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> #
>
> #
> # also be needed; see USB_STORAGE Help for more info
> #
> CONFIG_USB_STORAGE=y
> # CONFIG_USB_STORAGE_DEBUG is not set
> CONFIG_USB_STORAGE_REALTEK=y
> CONFIG_USB_STORAGE_DATAFAB=y
> CONFIG_USB_STORAGE_FREECOM=y
> CONFIG_USB_STORAGE_ISD200=y
> CONFIG_USB_STORAGE_USBAT=y
> CONFIG_USB_STORAGE_SDDR09=y
> CONFIG_USB_STORAGE_SDDR55=y
> CONFIG_USB_STORAGE_JUMPSHOT=y
> CONFIG_USB_STORAGE_ALAUDA=y
> CONFIG_USB_STORAGE_ONETOUCH=y
> CONFIG_USB_STORAGE_KARMA=y
> CONFIG_USB_STORAGE_CYPRESS_ATACB=y
> # CONFIG_USB_STORAGE_ENE_UB6250 is not set
> CONFIG_USB_UAS=y
> # CONFIG_USB_LIBUSUAL is not set
>
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
>
> #
> # USB port drivers
> #
> # CONFIG_USB_USS720 is not set
> # CONFIG_USB_SERIAL is not set
>
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_ADUTUX is not set
> # CONFIG_USB_SEVSEG is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_CYPRESS_CY7C63 is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_FTDI_ELAN is not set
> # CONFIG_USB_APPLEDISPLAY is not set
> CONFIG_USB_SISUSBVGA=y
> CONFIG_USB_SISUSBVGA_CON=y
> # CONFIG_USB_LD is not set
> # CONFIG_USB_TRANCEVIBRATOR is not set
> # CONFIG_USB_IOWARRIOR is not set
> # CONFIG_USB_TEST is not set
> # CONFIG_USB_ISIGHTFW is not set
> # CONFIG_USB_YUREX is not set
> # CONFIG_USB_GADGET is not set
>
> #
> # OTG and related infrastructure
> #
> CONFIG_USB_OTG_UTILS=y
> # CONFIG_USB_GPIO_VBUS is not set
> CONFIG_NOP_USB_XCEIV=y
> # CONFIG_UWB is not set
> # CONFIG_MMC is not set
> # CONFIG_MEMSTICK is not set
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=y
>
> #
> # LED drivers
> #
> # CONFIG_LEDS_LM3530 is not set
> # CONFIG_LEDS_ALIX2 is not set
> # CONFIG_LEDS_PCA9532 is not set
> # CONFIG_LEDS_GPIO is not set
> # CONFIG_LEDS_LP3944 is not set
> # CONFIG_LEDS_LP5521 is not set
> # CONFIG_LEDS_LP5523 is not set
> CONFIG_LEDS_CLEVO_MAIL=y
> # CONFIG_LEDS_PCA955X is not set
> CONFIG_LEDS_BD2802=y
> # CONFIG_LEDS_INTEL_SS4200 is not set
> # CONFIG_LEDS_LT3593 is not set
> CONFIG_LEDS_TRIGGERS=y
>
> #
> # LED Triggers
> #
> CONFIG_LEDS_TRIGGER_TIMER=y
> CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> CONFIG_LEDS_TRIGGER_BACKLIGHT=y
> # CONFIG_LEDS_TRIGGER_GPIO is not set
> CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
>
> #
> # iptables trigger is under Netfilter config (LED target)
> #
> # CONFIG_NFC_DEVICES is not set
> # CONFIG_ACCESSIBILITY is not set
> CONFIG_INFINIBAND=y
> CONFIG_INFINIBAND_USER_MAD=y
> CONFIG_INFINIBAND_USER_ACCESS=y
> CONFIG_INFINIBAND_USER_MEM=y
> CONFIG_INFINIBAND_ADDR_TRANS=y
> CONFIG_INFINIBAND_MTHCA=y
> CONFIG_INFINIBAND_MTHCA_DEBUG=y
> CONFIG_INFINIBAND_AMSO1100=y
> # CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
> CONFIG_INFINIBAND_CXGB3=y
> # CONFIG_INFINIBAND_CXGB3_DEBUG is not set
> CONFIG_MLX4_INFINIBAND=y
> CONFIG_INFINIBAND_NES=y
> # CONFIG_INFINIBAND_NES_DEBUG is not set
> CONFIG_INFINIBAND_IPOIB=y
> # CONFIG_INFINIBAND_IPOIB_CM is not set
> CONFIG_INFINIBAND_IPOIB_DEBUG=y
> # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
> CONFIG_INFINIBAND_SRP=y
> CONFIG_INFINIBAND_ISER=y
> CONFIG_EDAC=y
>
> #
> # Reporting subsystems
> #
> # CONFIG_EDAC_DEBUG is not set
> CONFIG_EDAC_DECODE_MCE=y
> # CONFIG_EDAC_MCE_INJ is not set
> CONFIG_EDAC_MM_EDAC=y
> CONFIG_EDAC_MCE=y
> CONFIG_EDAC_AMD76X=y
> CONFIG_EDAC_E7XXX=y
> CONFIG_EDAC_E752X=y
> CONFIG_EDAC_I82875P=y
> CONFIG_EDAC_I82975X=y
> CONFIG_EDAC_I3000=y
> # CONFIG_EDAC_I3200 is not set
> CONFIG_EDAC_X38=y
> CONFIG_EDAC_I5400=y
> CONFIG_EDAC_I7CORE=y
> CONFIG_EDAC_I82860=y
> CONFIG_EDAC_R82600=y
> CONFIG_EDAC_I5000=y
> CONFIG_EDAC_I5100=y
> CONFIG_EDAC_I7300=y
> CONFIG_RTC_LIB=y
> CONFIG_RTC_CLASS=y
> # CONFIG_RTC_HCTOSYS is not set
> # CONFIG_RTC_DEBUG is not set
>
> #
> # RTC interfaces
> #
> CONFIG_RTC_INTF_SYSFS=y
> CONFIG_RTC_INTF_PROC=y
> CONFIG_RTC_INTF_DEV=y
> # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
> # CONFIG_RTC_DRV_TEST is not set
>
> #
> # I2C RTC drivers
> #
> CONFIG_RTC_DRV_DS1307=y
> CONFIG_RTC_DRV_DS1374=y
> CONFIG_RTC_DRV_DS1672=y
> CONFIG_RTC_DRV_DS3232=y
> CONFIG_RTC_DRV_MAX6900=y
> CONFIG_RTC_DRV_RS5C372=y
> CONFIG_RTC_DRV_ISL1208=y
> CONFIG_RTC_DRV_ISL12022=y
> CONFIG_RTC_DRV_X1205=y
> CONFIG_RTC_DRV_PCF8563=y
> CONFIG_RTC_DRV_PCF8583=y
> CONFIG_RTC_DRV_M41T80=y
> CONFIG_RTC_DRV_M41T80_WDT=y
> CONFIG_RTC_DRV_BQ32K=y
> CONFIG_RTC_DRV_S35390A=y
> CONFIG_RTC_DRV_FM3130=y
> CONFIG_RTC_DRV_RX8581=y
> CONFIG_RTC_DRV_RX8025=y
> CONFIG_RTC_DRV_EM3027=y
> CONFIG_RTC_DRV_RV3029C2=y
>
> #
> # SPI RTC drivers
> #
>
> #
> # Platform RTC drivers
> #
> CONFIG_RTC_DRV_CMOS=y
> CONFIG_RTC_DRV_DS1286=y
> CONFIG_RTC_DRV_DS1511=y
> CONFIG_RTC_DRV_DS1553=y
> CONFIG_RTC_DRV_DS1742=y
> CONFIG_RTC_DRV_STK17TA8=y
> CONFIG_RTC_DRV_M48T86=y
> CONFIG_RTC_DRV_M48T35=y
> CONFIG_RTC_DRV_M48T59=y
> CONFIG_RTC_DRV_MSM6242=y
> CONFIG_RTC_DRV_BQ4802=y
> CONFIG_RTC_DRV_RP5C01=y
> CONFIG_RTC_DRV_V3020=y
>
> #
> # on-CPU RTC drivers
> #
> CONFIG_DMADEVICES=y
> # CONFIG_DMADEVICES_DEBUG is not set
>
> #
> # DMA Devices
> #
> CONFIG_INTEL_MID_DMAC=y
> CONFIG_INTEL_IOATDMA=y
> CONFIG_TIMB_DMA=y
> CONFIG_PCH_DMA=y
> CONFIG_DMA_ENGINE=y
>
> #
> # DMA Clients
> #
> CONFIG_NET_DMA=y
> CONFIG_ASYNC_TX_DMA=y
> # CONFIG_DMATEST is not set
> CONFIG_DCA=y
> CONFIG_AUXDISPLAY=y
> CONFIG_KS0108=y
> CONFIG_KS0108_PORT=0x378
> CONFIG_KS0108_DELAY=2
> CONFIG_UIO=y
> # CONFIG_UIO_CIF is not set
> # CONFIG_UIO_PDRV is not set
> # CONFIG_UIO_PDRV_GENIRQ is not set
> # CONFIG_UIO_AEC is not set
> # CONFIG_UIO_SERCOS3 is not set
> # CONFIG_UIO_PCI_GENERIC is not set
> # CONFIG_UIO_NETX is not set
>
> #
> # Xen driver support
> #
> CONFIG_XEN_BALLOON=y
> CONFIG_XEN_SCRUB_PAGES=y
> CONFIG_XEN_DEV_EVTCHN=y
> CONFIG_XEN_BACKEND=y
> CONFIG_XENFS=y
> CONFIG_XEN_COMPAT_XENFS=y
> CONFIG_XEN_SYS_HYPERVISOR=y
> CONFIG_XEN_XENBUS_FRONTEND=y
> CONFIG_XEN_GNTDEV=y
> CONFIG_XEN_GRANT_DEV_ALLOC=y
> CONFIG_XEN_PLATFORM_PCI=y
> CONFIG_SWIOTLB_XEN=y
> # CONFIG_STAGING is not set
> # CONFIG_X86_PLATFORM_DEVICES is not set
> CONFIG_CLKSRC_I8253=y
>
> #
> # Firmware Drivers
> #
> CONFIG_EDD=y
> # CONFIG_EDD_OFF is not set
> CONFIG_FIRMWARE_MEMMAP=y
> CONFIG_EFI_VARS=y
> CONFIG_DELL_RBU=y
> CONFIG_DCDBAS=y
> CONFIG_DMIID=y
> # CONFIG_DMI_SYSFS is not set
> CONFIG_ISCSI_IBFT_FIND=y
> CONFIG_ISCSI_IBFT=y
> # CONFIG_SIGMA is not set
> # CONFIG_GOOGLE_FIRMWARE is not set
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> CONFIG_EXT2_FS_SECURITY=y
> CONFIG_EXT2_FS_XIP=y
> CONFIG_EXT3_FS=y
> # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> CONFIG_EXT3_FS_SECURITY=y
> CONFIG_EXT4_FS=y
> CONFIG_EXT4_FS_XATTR=y
> CONFIG_EXT4_FS_POSIX_ACL=y
> CONFIG_EXT4_FS_SECURITY=y
> # CONFIG_EXT4_DEBUG is not set
> CONFIG_FS_XIP=y
> CONFIG_JBD=y
> CONFIG_JBD2=y
> CONFIG_FS_MBCACHE=y
> CONFIG_REISERFS_FS=y
> # CONFIG_REISERFS_CHECK is not set
> CONFIG_REISERFS_PROC_INFO=y
> CONFIG_REISERFS_FS_XATTR=y
> CONFIG_REISERFS_FS_POSIX_ACL=y
> CONFIG_REISERFS_FS_SECURITY=y
> # CONFIG_JFS_FS is not set
> # CONFIG_XFS_FS is not set
> # CONFIG_GFS2_FS is not set
> # CONFIG_OCFS2_FS is not set
> # CONFIG_BTRFS_FS is not set
> # CONFIG_NILFS2_FS is not set
> CONFIG_FS_POSIX_ACL=y
> CONFIG_FILE_LOCKING=y
> CONFIG_FSNOTIFY=y
> CONFIG_DNOTIFY=y
> CONFIG_INOTIFY_USER=y
> # CONFIG_FANOTIFY is not set
> # CONFIG_QUOTA is not set
> # CONFIG_QUOTACTL is not set
> # CONFIG_AUTOFS4_FS is not set
> # CONFIG_FUSE_FS is not set
> CONFIG_GENERIC_ACL=y
>
> #
> # Caches
> #
> # CONFIG_FSCACHE is not set
>
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> # CONFIG_UDF_FS is not set
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=y
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
> # CONFIG_NTFS_FS is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_PROC_VMCORE=y
> CONFIG_PROC_SYSCTL=y
> CONFIG_PROC_PAGE_MONITOR=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> CONFIG_TMPFS_POSIX_ACL=y
> CONFIG_TMPFS_XATTR=y
> CONFIG_HUGETLBFS=y
> CONFIG_HUGETLB_PAGE=y
> CONFIG_CONFIGFS_FS=y
> CONFIG_MISC_FILESYSTEMS=y
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_JFFS2_FS is not set
> # CONFIG_UBIFS_FS is not set
> # CONFIG_LOGFS is not set
> # CONFIG_CRAMFS is not set
> CONFIG_SQUASHFS=y
> CONFIG_SQUASHFS_XATTR=y
> CONFIG_SQUASHFS_LZO=y
> CONFIG_SQUASHFS_XZ=y
> # CONFIG_SQUASHFS_EMBEDDED is not set
> CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
> # CONFIG_VXFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_OMFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> # CONFIG_PSTORE is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> # CONFIG_EXOFS_FS is not set
> # CONFIG_NETWORK_FILESYSTEMS is not set
>
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> # CONFIG_ACORN_PARTITION is not set
> CONFIG_OSF_PARTITION=y
> CONFIG_AMIGA_PARTITION=y
> # CONFIG_ATARI_PARTITION is not set
> CONFIG_MAC_PARTITION=y
> CONFIG_MSDOS_PARTITION=y
> CONFIG_BSD_DISKLABEL=y
> CONFIG_MINIX_SUBPARTITION=y
> CONFIG_SOLARIS_X86_PARTITION=y
> CONFIG_UNIXWARE_DISKLABEL=y
> # CONFIG_LDM_PARTITION is not set
> CONFIG_SGI_PARTITION=y
> # CONFIG_ULTRIX_PARTITION is not set
> CONFIG_SUN_PARTITION=y
> CONFIG_KARMA_PARTITION=y
> CONFIG_EFI_PARTITION=y
> # CONFIG_SYSV68_PARTITION is not set
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="utf8"
> CONFIG_NLS_CODEPAGE_437=y
> CONFIG_NLS_CODEPAGE_737=y
> CONFIG_NLS_CODEPAGE_775=y
> CONFIG_NLS_CODEPAGE_850=y
> CONFIG_NLS_CODEPAGE_852=y
> CONFIG_NLS_CODEPAGE_855=y
> CONFIG_NLS_CODEPAGE_857=y
> CONFIG_NLS_CODEPAGE_860=y
> CONFIG_NLS_CODEPAGE_861=y
> CONFIG_NLS_CODEPAGE_862=y
> CONFIG_NLS_CODEPAGE_863=y
> CONFIG_NLS_CODEPAGE_864=y
> CONFIG_NLS_CODEPAGE_865=y
> CONFIG_NLS_CODEPAGE_866=y
> CONFIG_NLS_CODEPAGE_869=y
> CONFIG_NLS_CODEPAGE_936=y
> CONFIG_NLS_CODEPAGE_950=y
> CONFIG_NLS_CODEPAGE_932=y
> CONFIG_NLS_CODEPAGE_949=y
> CONFIG_NLS_CODEPAGE_874=y
> CONFIG_NLS_ISO8859_8=y
> CONFIG_NLS_CODEPAGE_1250=y
> CONFIG_NLS_CODEPAGE_1251=y
> CONFIG_NLS_ASCII=y
> CONFIG_NLS_ISO8859_1=y
> CONFIG_NLS_ISO8859_2=y
> CONFIG_NLS_ISO8859_3=y
> CONFIG_NLS_ISO8859_4=y
> CONFIG_NLS_ISO8859_5=y
> CONFIG_NLS_ISO8859_6=y
> CONFIG_NLS_ISO8859_7=y
> CONFIG_NLS_ISO8859_9=y
> CONFIG_NLS_ISO8859_13=y
> CONFIG_NLS_ISO8859_14=y
> CONFIG_NLS_ISO8859_15=y
> CONFIG_NLS_KOI8_R=y
> CONFIG_NLS_KOI8_U=y
> CONFIG_NLS_UTF8=y
> CONFIG_DLM=y
> CONFIG_DLM_DEBUG=y
>
> #
> # Kernel hacking
> #
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> CONFIG_PRINTK_TIME=y
> CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
> # CONFIG_ENABLE_WARN_DEPRECATED is not set
> CONFIG_ENABLE_MUST_CHECK=y
> CONFIG_FRAME_WARN=1024
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_STRIP_ASM_SYMS is not set
> CONFIG_UNUSED_SYMBOLS=y
> # CONFIG_DEBUG_FS is not set
> CONFIG_HEADERS_CHECK=y
> # CONFIG_DEBUG_SECTION_MISMATCH is not set
> # CONFIG_DEBUG_KERNEL is not set
> # CONFIG_HARDLOCKUP_DETECTOR is not set
> # CONFIG_SLUB_DEBUG_ON is not set
> # CONFIG_SLUB_STATS is not set
> # CONFIG_SPARSE_RCU_POINTER is not set
> CONFIG_DEBUG_BUGVERBOSE=y
> CONFIG_DEBUG_MEMORY_INIT=y
> CONFIG_ARCH_WANT_FRAME_POINTERS=y
> # CONFIG_FRAME_POINTER is not set
> CONFIG_RCU_CPU_STALL_TIMEOUT=60
> # CONFIG_SYSCTL_SYSCALL_CHECK is not set
> CONFIG_USER_STACKTRACE_SUPPORT=y
> CONFIG_HAVE_FUNCTION_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
> CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
> CONFIG_HAVE_DYNAMIC_FTRACE=y
> CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
> CONFIG_HAVE_C_RECORDMCOUNT=y
> CONFIG_TRACING_SUPPORT=y
> # CONFIG_FTRACE is not set
> # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
> # CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
> # CONFIG_BUILD_DOCSRC is not set
> # CONFIG_DMA_API_DEBUG is not set
> # CONFIG_ATOMIC64_SELFTEST is not set
> # CONFIG_ASYNC_RAID6_TEST is not set
> # CONFIG_SAMPLES is not set
> CONFIG_HAVE_ARCH_KGDB=y
> CONFIG_HAVE_ARCH_KMEMCHECK=y
> # CONFIG_TEST_KSTRTOX is not set
> CONFIG_STRICT_DEVMEM=y
> # CONFIG_X86_VERBOSE_BOOTUP is not set
> CONFIG_EARLY_PRINTK=y
> CONFIG_EARLY_PRINTK_DBGP=y
> # CONFIG_DEBUG_SET_MODULE_RONX is not set
> CONFIG_DOUBLEFAULT=y
> # CONFIG_IOMMU_STRESS is not set
> CONFIG_HAVE_MMIOTRACE_SUPPORT=y
> CONFIG_IO_DELAY_TYPE_0X80=0
> CONFIG_IO_DELAY_TYPE_0XED=1
> CONFIG_IO_DELAY_TYPE_UDELAY=2
> CONFIG_IO_DELAY_TYPE_NONE=3
> CONFIG_IO_DELAY_0X80=y
> # CONFIG_IO_DELAY_0XED is not set
> # CONFIG_IO_DELAY_UDELAY is not set
> # CONFIG_IO_DELAY_NONE is not set
> CONFIG_DEFAULT_IO_DELAY_TYPE=0
> CONFIG_OPTIMIZE_INLINING=y
>
> #
> # Security options
> #
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY_DMESG_RESTRICT is not set
> # CONFIG_SECURITY is not set
> CONFIG_SECURITYFS=y
> CONFIG_DEFAULT_SECURITY_DAC=y
> CONFIG_DEFAULT_SECURITY=""
> CONFIG_XOR_BLOCKS=y
> CONFIG_ASYNC_CORE=y
> CONFIG_ASYNC_MEMCPY=y
> CONFIG_ASYNC_XOR=y
> CONFIG_ASYNC_PQ=y
> CONFIG_ASYNC_RAID6_RECOV=y
> CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
> CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
> CONFIG_CRYPTO=y
>
> #
> # Crypto core or helper
> #
> CONFIG_CRYPTO_ALGAPI=y
> CONFIG_CRYPTO_ALGAPI2=y
> CONFIG_CRYPTO_AEAD=y
> CONFIG_CRYPTO_AEAD2=y
> CONFIG_CRYPTO_BLKCIPHER=y
> CONFIG_CRYPTO_BLKCIPHER2=y
> CONFIG_CRYPTO_HASH=y
> CONFIG_CRYPTO_HASH2=y
> CONFIG_CRYPTO_RNG=y
> CONFIG_CRYPTO_RNG2=y
> CONFIG_CRYPTO_PCOMP=y
> CONFIG_CRYPTO_PCOMP2=y
> CONFIG_CRYPTO_MANAGER=y
> CONFIG_CRYPTO_MANAGER2=y
> CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
> CONFIG_CRYPTO_GF128MUL=y
> CONFIG_CRYPTO_NULL=y
> # CONFIG_CRYPTO_PCRYPT is not set
> CONFIG_CRYPTO_WORKQUEUE=y
> # CONFIG_CRYPTO_CRYPTD is not set
> CONFIG_CRYPTO_AUTHENC=y
> # CONFIG_CRYPTO_TEST is not set
>
> #
> # Authenticated Encryption with Associated Data
> #
> CONFIG_CRYPTO_CCM=y
> CONFIG_CRYPTO_GCM=y
> CONFIG_CRYPTO_SEQIV=y
>
> #
> # Block modes
> #
> CONFIG_CRYPTO_CBC=y
> CONFIG_CRYPTO_CTR=y
> CONFIG_CRYPTO_CTS=y
> CONFIG_CRYPTO_ECB=y
> CONFIG_CRYPTO_LRW=y
> CONFIG_CRYPTO_PCBC=y
> CONFIG_CRYPTO_XTS=y
>
> #
> # Hash modes
> #
> CONFIG_CRYPTO_HMAC=y
> CONFIG_CRYPTO_XCBC=y
> # CONFIG_CRYPTO_VMAC is not set
>
> #
> # Digest
> #
> CONFIG_CRYPTO_CRC32C=y
> CONFIG_CRYPTO_CRC32C_INTEL=y
> CONFIG_CRYPTO_GHASH=y
> CONFIG_CRYPTO_MD4=y
> CONFIG_CRYPTO_MD5=y
> CONFIG_CRYPTO_MICHAEL_MIC=y
> CONFIG_CRYPTO_RMD128=y
> CONFIG_CRYPTO_RMD160=y
> CONFIG_CRYPTO_RMD256=y
> CONFIG_CRYPTO_RMD320=y
> CONFIG_CRYPTO_SHA1=y
> CONFIG_CRYPTO_SHA256=y
> CONFIG_CRYPTO_SHA512=y
> CONFIG_CRYPTO_TGR192=y
> CONFIG_CRYPTO_WP512=y
>
> #
> # Ciphers
> #
> CONFIG_CRYPTO_AES=y
> CONFIG_CRYPTO_AES_586=y
> # CONFIG_CRYPTO_AES_NI_INTEL is not set
> CONFIG_CRYPTO_ANUBIS=y
> CONFIG_CRYPTO_ARC4=y
> CONFIG_CRYPTO_BLOWFISH=y
> CONFIG_CRYPTO_CAMELLIA=y
> CONFIG_CRYPTO_CAST5=y
> CONFIG_CRYPTO_CAST6=y
> CONFIG_CRYPTO_DES=y
> CONFIG_CRYPTO_FCRYPT=y
> CONFIG_CRYPTO_KHAZAD=y
> CONFIG_CRYPTO_SALSA20=y
> CONFIG_CRYPTO_SALSA20_586=y
> CONFIG_CRYPTO_SEED=y
> CONFIG_CRYPTO_SERPENT=y
> CONFIG_CRYPTO_TEA=y
> CONFIG_CRYPTO_TWOFISH=y
> CONFIG_CRYPTO_TWOFISH_COMMON=y
> CONFIG_CRYPTO_TWOFISH_586=y
>
> #
> # Compression
> #
> CONFIG_CRYPTO_DEFLATE=y
> CONFIG_CRYPTO_ZLIB=y
> CONFIG_CRYPTO_LZO=y
>
> #
> # Random Number Generation
> #
> CONFIG_CRYPTO_ANSI_CPRNG=y
> # CONFIG_CRYPTO_USER_API_HASH is not set
> # CONFIG_CRYPTO_USER_API_SKCIPHER is not set
> CONFIG_CRYPTO_HW=y
> CONFIG_CRYPTO_DEV_PADLOCK=y
> CONFIG_CRYPTO_DEV_PADLOCK_AES=y
> CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
> CONFIG_CRYPTO_DEV_GEODE=y
> CONFIG_CRYPTO_DEV_HIFN_795X=y
> CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
> CONFIG_HAVE_KVM=y
> CONFIG_VIRTUALIZATION=y
> # CONFIG_KVM is not set
> CONFIG_VHOST_NET=y
> # CONFIG_LGUEST is not set
> CONFIG_VIRTIO=y
> CONFIG_VIRTIO_RING=y
> CONFIG_VIRTIO_PCI=y
> CONFIG_VIRTIO_BALLOON=y
> # CONFIG_BINARY_PRINTF is not set
>
> #
> # Library routines
> #
> CONFIG_RAID6_PQ=y
> CONFIG_BITREVERSE=y
> CONFIG_GENERIC_FIND_FIRST_BIT=y
> CONFIG_CRC_CCITT=y
> CONFIG_CRC16=y
> CONFIG_CRC_T10DIF=y
> CONFIG_CRC_ITU_T=y
> CONFIG_CRC32=y
> # CONFIG_CRC7 is not set
> CONFIG_LIBCRC32C=y
> CONFIG_AUDIT_GENERIC=y
> CONFIG_ZLIB_INFLATE=y
> CONFIG_ZLIB_DEFLATE=y
> CONFIG_LZO_COMPRESS=y
> CONFIG_LZO_DECOMPRESS=y
> CONFIG_XZ_DEC=y
> CONFIG_XZ_DEC_X86=y
> CONFIG_XZ_DEC_POWERPC=y
> CONFIG_XZ_DEC_IA64=y
> CONFIG_XZ_DEC_ARM=y
> CONFIG_XZ_DEC_ARMTHUMB=y
> CONFIG_XZ_DEC_SPARC=y
> CONFIG_XZ_DEC_BCJ=y
> # CONFIG_XZ_DEC_TEST is not set
> CONFIG_DECOMPRESS_GZIP=y
> CONFIG_DECOMPRESS_BZIP2=y
> CONFIG_DECOMPRESS_LZMA=y
> CONFIG_DECOMPRESS_XZ=y
> CONFIG_DECOMPRESS_LZO=y
> CONFIG_GENERIC_ALLOCATOR=y
> CONFIG_REED_SOLOMON=y
> CONFIG_REED_SOLOMON_DEC16=y
> CONFIG_TEXTSEARCH=y
> CONFIG_TEXTSEARCH_KMP=y
> CONFIG_TEXTSEARCH_BM=y
> CONFIG_TEXTSEARCH_FSM=y
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
> CONFIG_HAS_DMA=y
> CONFIG_CHECK_SIGNATURE=y
> CONFIG_CPU_RMAP=y
> CONFIG_NLATTR=y
> CONFIG_AVERAGE=y
> 00:00.0 0500: 10de:03e2 (rev a1)
> 00:01.0 0601: 10de:03e1 (rev a2)
> 00:01.1 0c05: 10de:03eb (rev a2)
> 00:01.2 0500: 10de:03f5 (rev a2)
> 00:02.0 0c03: 10de:03f1 (rev a3)
> 00:02.1 0c03: 10de:03f2 (rev a3)
> 00:04.0 0604: 10de:03f3 (rev a1)
> 00:05.0 0403: 10de:03f0 (rev a2)
> 00:06.0 0101: 10de:03ec (rev a2)
> 00:07.0 0680: 10de:03ef (rev a2)
> 00:08.0 0101: 10de:03f6 (rev a2)
> 00:08.1 0101: 10de:03f6 (rev a2)
> 00:09.0 0604: 10de:03e8 (rev a2)
> 00:0b.0 0604: 10de:03e9 (rev a2)
> 00:0c.0 0604: 10de:03e9 (rev a2)
> 00:0d.0 0300: 10de:03d6 (rev a2)
> 00:18.0 0600: 1022:1200
> 00:18.1 0600: 1022:1201
> 00:18.2 0600: 1022:1202
> 00:18.3 0600: 1022:1203
> 00:18.4 0600: 1022:1204
> 00:00.0 0600: 1002:7910
> 00:01.0 0604: 1002:7912
> 00:12.0 0106: 1002:4380
> 00:13.0 0c03: 1002:4387
> 00:13.1 0c03: 1002:4388
> 00:13.2 0c03: 1002:4389
> 00:13.3 0c03: 1002:438a
> 00:13.4 0c03: 1002:438b
> 00:13.5 0c03: 1002:4386
> 00:14.0 0c05: 1002:4385 (rev 14)
> 00:14.1 0101: 1002:438c
> 00:14.2 0403: 1002:4383
> 00:14.3 0601: 1002:438d
> 00:14.4 0604: 1002:4384
> 00:18.0 0600: 1022:1100
> 00:18.1 0600: 1022:1101
> 00:18.2 0600: 1022:1102
> 00:18.3 0600: 1022:1103
> 01:05.0 0300: 1002:791e
> 02:0f.0 0200: 10ec:8167 (rev 10)
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7
2011-06-20 12:39 ` Konrad Rzeszutek Wilk
@ 2011-07-29 19:24 ` Anthony Wright
0 siblings, 0 replies; 21+ messages in thread
From: Anthony Wright @ 2011-07-29 19:24 UTC (permalink / raw)
To: xen-devel; +Cc: Ian Pratt, Konrad Rzeszutek Wilk
On 20/06/2011 13:39, Konrad Rzeszutek Wilk wrote:
> On Fri, Jun 17, 2011 at 10:45:41AM +0100, Anthony Wright wrote:
>> On 16/06/2011 21:10, Konrad Rzeszutek Wilk wrote:
>>> So a couple of things popped at when looking at this:
>>> a). "sata_nv 0000:00:08.1: BMDMA: failed to set dma mask, falling back to PIO"
>>>
>>> That is not good. Somehow it wasn't able to set a 32-bit mask. Don't know
>>> if that is due to the driver or just that the kernel can't do it (b/c it
>>> was compiled with some special options).
>> I never saw anything in dmesg or any other logs.
> Uh, I copied that from your logs.
>
>>> b). Are you using some special .config option? If you were to use a normal
>>> distro would you see this?
>> My config is attached.
> Great.
>>> c). You are using a 32-bit dom0. Didn't notice it until now so I wonder
>>> if there are some lingering issues (for example not flushing the highmemory
>>> mappings) that are at foot. Had you tried a 64-bit kernel before?
>> I haven't tried 64 bit because I need a 32 bit kernel.
>>> d). Does the problem exist if you try it with a 2.6.39 kernel or the 3.0-rc3?
>> It happens on every kernel I've tried which is 2.6.39, 2.6.39.x & 3.0-rc3
>>> e). Can you run lspci -n ? There is a pretty big file in drivers/usb/host/pci-quirks.c
>>> Want to check against your machine.
>> I have the problem on two machines and have attached the lspci -n for
>> both of them.
> Is it possible for you provide this binary blob/USB disk somewhere so I can
> test it on my hardware?
>
Just to let the list know, that after a lot of work by konrad we
discovered that the problem while present in 3.0-rc3 was no longer
present in the final 3.0 release of linux. We never quite understood the
cause and I was the only person who could reproduce it reliably, but
since it's now fixed we're regarding the issue as closed.
thanks,
Anthony.
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2011-07-29 19:24 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <8150663.20.1306842333642.JavaMail.root@zimbra.overnetdata.com>
2011-05-31 12:07 ` USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7 Anthony Wright
2011-05-31 14:54 ` Konrad Rzeszutek Wilk
2011-06-01 9:52 ` Anthony Wright
2011-06-01 14:23 ` Konrad Rzeszutek Wilk
2011-06-02 12:24 ` Anthony Wright
2011-06-02 14:38 ` Konrad Rzeszutek Wilk
2011-06-02 14:44 ` Konrad Rzeszutek Wilk
2011-06-02 15:59 ` Anthony Wright
2011-06-09 13:11 ` Anthony Wright
2011-06-09 13:25 ` Ian Pratt
2011-06-09 13:32 ` Konrad Rzeszutek Wilk
2011-06-09 13:40 ` Anthony Wright
2011-06-10 16:46 ` Konrad Rzeszutek Wilk
2011-06-13 22:06 ` Konrad Rzeszutek Wilk
2011-06-15 10:45 ` Anthony Wright
2011-06-15 11:43 ` Ian Pratt
2011-06-16 20:10 ` Konrad Rzeszutek Wilk
2011-06-17 9:45 ` Anthony Wright
2011-06-20 12:39 ` Konrad Rzeszutek Wilk
2011-07-29 19:24 ` Anthony Wright
2011-06-01 8:53 ` Ian Pratt
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.