[PATCH v3 0/5] MFD/input/ASoC: twl6040: irq registration changes

[PATCH v3 0/5] MFD/input/ASoC: twl6040: irq registration changes

[Peter Ujfalusi]

Hello,

Changes since v2:
- Fix the check in the slaves driver for the validity of the received irq
- Mark Brown's ack added to patch 3

Intro mail froim v1:
As Samuel, and Felipe requested for the twl6040 MFD series:
http://marc.info/?l=linux-kernel&m=130978512225430&w=2
http://marc.info/?l=linux-omap&m=130978403224218&w=2

This is the update to remove the obfuscation around the threaded irq request
in the twl6040 driver and it's slaves.

With this change the slaves uses directly the threaded irq request, and the
core driver passes the irq number for the slaves to use (configured runtime, so
machine drivers do not need to be updated).

Regards,
Peter

PS: for the remaining comments from Samuel I have changed the series, since the
requested change was small.
I'm not intended to send the series again, unless it is requested (again the
change from v6 is minimal - few lines has been removed/replaced).

---
Peter Ujfalusi (5):
  MFD: twl6040: Use resource to provide irq number for slaves
  input: twl6040-vibra: Do not use wrapper for irq request
  ASoC: twl6040: Do not use wrapper for irq request
  MFD: twl6040: Demand valid interrupt configuration
  MFD: twl6040: Remove wrapper for threaded irq request

 drivers/input/misc/twl6040-vibra.c |   17 ++++++---
 drivers/mfd/twl6040-core.c         |   69 ++++++++++++++++++++++++-----------
 drivers/mfd/twl6040-irq.c          |   16 +--------
 include/linux/mfd/twl6040.h        |   22 -----------
 sound/soc/codecs/twl6040.c         |   19 +++++++---
 5 files changed, 74 insertions(+), 69 deletions(-)

-- 
1.7.6

[PATCH v3 0/5] MFD/input/ASoC: twl6040: irq registration changes

[Peter Ujfalusi]

Hello,

Changes since v2:
- Fix the check in the slaves driver for the validity of the received irq
- Mark Brown's ack added to patch 3

Intro mail froim v1:
As Samuel, and Felipe requested for the twl6040 MFD series:
http://marc.info/?l=linux-kernel&m=130978512225430&w=2
http://marc.info/?l=linux-omap&m=130978403224218&w=2

This is the update to remove the obfuscation around the threaded irq request
in the twl6040 driver and it's slaves.

With this change the slaves uses directly the threaded irq request, and the
core driver passes the irq number for the slaves to use (configured runtime, so
machine drivers do not need to be updated).

Regards,
Peter

PS: for the remaining comments from Samuel I have changed the series, since the
requested change was small.
I'm not intended to send the series again, unless it is requested (again the
change from v6 is minimal - few lines has been removed/replaced).

---
Peter Ujfalusi (5):
  MFD: twl6040: Use resource to provide irq number for slaves
  input: twl6040-vibra: Do not use wrapper for irq request
  ASoC: twl6040: Do not use wrapper for irq request
  MFD: twl6040: Demand valid interrupt configuration
  MFD: twl6040: Remove wrapper for threaded irq request

 drivers/input/misc/twl6040-vibra.c |   17 ++++++---
 drivers/mfd/twl6040-core.c         |   69 ++++++++++++++++++++++++-----------
 drivers/mfd/twl6040-irq.c          |   16 +--------
 include/linux/mfd/twl6040.h        |   22 -----------
 sound/soc/codecs/twl6040.c         |   19 +++++++---
 5 files changed, 74 insertions(+), 69 deletions(-)

-- 
1.7.6

[PATCH v3 1/5] MFD: twl6040: Use resource to provide irq number for slaves

[Peter Ujfalusi]

Provide the irq number for slaves via resource on the
platform device.
The irq number configuration is done in the twl6040-core
at probe time, so machine drivers do not need to be
modified.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/mfd/twl6040-core.c |   25 +++++++++++++++++++++++++
 1 files changed, 25 insertions(+), 0 deletions(-)

diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index cfaedb5..471f489 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -435,6 +435,18 @@ unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
 }
 EXPORT_SYMBOL(twl6040_get_sysclk);
 
+static struct resource twl6040_vibra_rsrc[] = {
+	{
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource twl6040_codec_rsrc[] = {
+	{
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
 static int __devinit twl6040_probe(struct platform_device *pdev)
 {
 	struct twl4030_audio_data *pdata = pdev->dev.platform_data;
@@ -499,16 +511,29 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 	twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL);
 
 	if (pdata->codec) {
+		int irq = twl6040->irq_base + TWL6040_IRQ_PLUG;
+
 		cell = &twl6040->cells[children];
 		cell->name = "twl6040-codec";
+		twl6040_codec_rsrc[0].start = irq;
+		twl6040_codec_rsrc[0].end = irq;
+		cell->resources = twl6040_codec_rsrc;
+		cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc);
 		cell->platform_data = pdata->codec;
 		cell->pdata_size = sizeof(*pdata->codec);
 		children++;
 	}
 
 	if (pdata->vibra) {
+		int irq = twl6040->irq_base + TWL6040_IRQ_VIB;
+
 		cell = &twl6040->cells[children];
 		cell->name = "twl6040-vibra";
+		twl6040_vibra_rsrc[0].start = irq;
+		twl6040_vibra_rsrc[0].end = irq;
+		cell->resources = twl6040_vibra_rsrc;
+		cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc);
+
 		cell->platform_data = pdata->vibra;
 		cell->pdata_size = sizeof(*pdata->vibra);
 		children++;
-- 
1.7.6

[PATCH v3 1/5] MFD: twl6040: Use resource to provide irq number for slaves

[Peter Ujfalusi]

Provide the irq number for slaves via resource on the
platform device.
The irq number configuration is done in the twl6040-core
at probe time, so machine drivers do not need to be
modified.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/mfd/twl6040-core.c |   25 +++++++++++++++++++++++++
 1 files changed, 25 insertions(+), 0 deletions(-)

diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index cfaedb5..471f489 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -435,6 +435,18 @@ unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
 }
 EXPORT_SYMBOL(twl6040_get_sysclk);
 
+static struct resource twl6040_vibra_rsrc[] = {
+	{
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource twl6040_codec_rsrc[] = {
+	{
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
 static int __devinit twl6040_probe(struct platform_device *pdev)
 {
 	struct twl4030_audio_data *pdata = pdev->dev.platform_data;
@@ -499,16 +511,29 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 	twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL);
 
 	if (pdata->codec) {
+		int irq = twl6040->irq_base + TWL6040_IRQ_PLUG;
+
 		cell = &twl6040->cells[children];
 		cell->name = "twl6040-codec";
+		twl6040_codec_rsrc[0].start = irq;
+		twl6040_codec_rsrc[0].end = irq;
+		cell->resources = twl6040_codec_rsrc;
+		cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc);
 		cell->platform_data = pdata->codec;
 		cell->pdata_size = sizeof(*pdata->codec);
 		children++;
 	}
 
 	if (pdata->vibra) {
+		int irq = twl6040->irq_base + TWL6040_IRQ_VIB;
+
 		cell = &twl6040->cells[children];
 		cell->name = "twl6040-vibra";
+		twl6040_vibra_rsrc[0].start = irq;
+		twl6040_vibra_rsrc[0].end = irq;
+		cell->resources = twl6040_vibra_rsrc;
+		cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc);
+
 		cell->platform_data = pdata->vibra;
 		cell->pdata_size = sizeof(*pdata->vibra);
 		children++;
-- 
1.7.6

[PATCH v3 2/5] input: twl6040-vibra: Do not use wrapper for irq request

[Peter Ujfalusi]

The twl6040_request_irq/free_irq inline functions are going
to be removed, so replace them with direct calls.
The irq number is provided by the core driver via resource.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/input/misc/twl6040-vibra.c |   17 ++++++++++++-----
 1 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index dbf745d..c43002e 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -47,6 +47,7 @@ struct vibra_info {
 	struct workqueue_struct *workqueue;
 	struct work_struct play_work;
 	struct mutex mutex;
+	int irq;
 
 	bool enabled;
 	int weak_speed;
@@ -277,6 +278,13 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
 		goto err_kzalloc;
 	}
 
+	info->irq = platform_get_irq(pdev, 0);
+	if (info->irq < 0) {
+		dev_err(info->dev, "invalid irq\n");
+		ret = -EINVAL;
+		goto err_kzalloc;
+	}
+
 	mutex_init(&info->mutex);
 
 	info->input_dev = input_allocate_device();
@@ -308,9 +316,8 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, info);
 
-	ret = twl6040_request_irq(info->twl6040, TWL6040_IRQ_VIB,
-				  twl6040_vib_irq_handler, 0,
-				  "twl6040_irq_vib", info);
+	ret = request_threaded_irq(info->irq, NULL, twl6040_vib_irq_handler, 0,
+				   "twl6040_irq_vib", info);
 	if (ret) {
 		dev_err(info->dev, "VIB IRQ request failed: %d\n", ret);
 		goto err_irq;
@@ -360,7 +367,7 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
 err_voltage:
 	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
 err_regulator:
-	twl6040_free_irq(info->twl6040, TWL6040_IRQ_VIB, info);
+	free_irq(info->irq, info);
 err_irq:
 	input_unregister_device(info->input_dev);
 	info->input_dev = NULL;
@@ -379,7 +386,7 @@ static int __devexit twl6040_vibra_remove(struct platform_device *pdev)
 	struct vibra_info *info = platform_get_drvdata(pdev);
 
 	input_unregister_device(info->input_dev);
-	twl6040_free_irq(info->twl6040, TWL6040_IRQ_VIB, info);
+	free_irq(info->irq, info);
 	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
 	destroy_workqueue(info->workqueue);
 	kfree(info);
-- 
1.7.6

[PATCH v3 2/5] input: twl6040-vibra: Do not use wrapper for irq request

[Peter Ujfalusi]

The twl6040_request_irq/free_irq inline functions are going
to be removed, so replace them with direct calls.
The irq number is provided by the core driver via resource.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/input/misc/twl6040-vibra.c |   17 ++++++++++++-----
 1 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index dbf745d..c43002e 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -47,6 +47,7 @@ struct vibra_info {
 	struct workqueue_struct *workqueue;
 	struct work_struct play_work;
 	struct mutex mutex;
+	int irq;
 
 	bool enabled;
 	int weak_speed;
@@ -277,6 +278,13 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
 		goto err_kzalloc;
 	}
 
+	info->irq = platform_get_irq(pdev, 0);
+	if (info->irq < 0) {
+		dev_err(info->dev, "invalid irq\n");
+		ret = -EINVAL;
+		goto err_kzalloc;
+	}
+
 	mutex_init(&info->mutex);
 
 	info->input_dev = input_allocate_device();
@@ -308,9 +316,8 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, info);
 
-	ret = twl6040_request_irq(info->twl6040, TWL6040_IRQ_VIB,
-				  twl6040_vib_irq_handler, 0,
-				  "twl6040_irq_vib", info);
+	ret = request_threaded_irq(info->irq, NULL, twl6040_vib_irq_handler, 0,
+				   "twl6040_irq_vib", info);
 	if (ret) {
 		dev_err(info->dev, "VIB IRQ request failed: %d\n", ret);
 		goto err_irq;
@@ -360,7 +367,7 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
 err_voltage:
 	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
 err_regulator:
-	twl6040_free_irq(info->twl6040, TWL6040_IRQ_VIB, info);
+	free_irq(info->irq, info);
 err_irq:
 	input_unregister_device(info->input_dev);
 	info->input_dev = NULL;
@@ -379,7 +386,7 @@ static int __devexit twl6040_vibra_remove(struct platform_device *pdev)
 	struct vibra_info *info = platform_get_drvdata(pdev);
 
 	input_unregister_device(info->input_dev);
-	twl6040_free_irq(info->twl6040, TWL6040_IRQ_VIB, info);
+	free_irq(info->irq, info);
 	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
 	destroy_workqueue(info->workqueue);
 	kfree(info);
-- 
1.7.6

[PATCH v3 3/5] ASoC: twl6040: Do not use wrapper for irq request

[Peter Ujfalusi]

The twl6040_request_irq/free_irq inline functions are going
to be removed, so replace them with direct calls.
The irq number is provided by the core driver via resource.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/twl6040.c |   19 ++++++++++++++-----
 1 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index 0145041..14e3a58 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -76,6 +76,7 @@ struct twl6040_jack_data {
 
 /* codec private data */
 struct twl6040_data {
+	int plug_irq;
 	int codec_powered;
 	int pll;
 	int non_lp;
@@ -1527,6 +1528,8 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 {
 	struct twl6040_data *priv;
 	struct twl4030_codec_data *pdata = dev_get_platdata(codec->dev);
+	struct platform_device *pdev = container_of(codec->dev,
+						   struct platform_device, dev);
 	int ret = 0;
 
 	priv = kzalloc(sizeof(struct twl6040_data), GFP_KERNEL);
@@ -1553,6 +1556,13 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 		priv->hf_right_step = 1;
 	}
 
+	priv->plug_irq = platform_get_irq(pdev, 0);
+	if (priv->plug_irq < 0) {
+		dev_err(codec->dev, "invalid irq\n");
+		ret = -EINVAL;
+		goto work_err;
+	}
+
 	priv->sysclk_constraints = &hp_constraints;
 	priv->workqueue = create_singlethread_workqueue("twl6040-codec");
 	if (!priv->workqueue) {
@@ -1581,9 +1591,8 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 	INIT_DELAYED_WORK(&priv->hs_delayed_work, twl6040_pga_hs_work);
 	INIT_DELAYED_WORK(&priv->hf_delayed_work, twl6040_pga_hf_work);
 
-	ret = twl6040_request_irq(codec->control_data, TWL6040_IRQ_PLUG,
-				  twl6040_audio_handler, 0,
-				  "twl6040_irq_plug", codec);
+	ret = request_threaded_irq(priv->plug_irq, NULL, twl6040_audio_handler,
+				   0, "twl6040_irq_plug", codec);
 	if (ret) {
 		dev_err(codec->dev, "PLUG IRQ request failed: %d\n", ret);
 		goto plugirq_err;
@@ -1604,7 +1613,7 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 	return 0;
 
 bias_err:
-	twl6040_free_irq(codec->control_data, TWL6040_IRQ_PLUG, codec);
+	free_irq(priv->plug_irq, codec);
 plugirq_err:
 	destroy_workqueue(priv->hs_workqueue);
 hswq_err:
@@ -1621,7 +1630,7 @@ static int twl6040_remove(struct snd_soc_codec *codec)
 	struct twl6040_data *priv = snd_soc_codec_get_drvdata(codec);
 
 	twl6040_set_bias_level(codec, SND_SOC_BIAS_OFF);
-	twl6040_free_irq(codec->control_data, TWL6040_IRQ_PLUG, codec);
+	free_irq(priv->plug_irq, codec);
 	destroy_workqueue(priv->workqueue);
 	destroy_workqueue(priv->hf_workqueue);
 	destroy_workqueue(priv->hs_workqueue);
-- 
1.7.6

[PATCH v3 3/5] ASoC: twl6040: Do not use wrapper for irq request

[Peter Ujfalusi]

The twl6040_request_irq/free_irq inline functions are going
to be removed, so replace them with direct calls.
The irq number is provided by the core driver via resource.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/twl6040.c |   19 ++++++++++++++-----
 1 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index 0145041..14e3a58 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -76,6 +76,7 @@ struct twl6040_jack_data {
 
 /* codec private data */
 struct twl6040_data {
+	int plug_irq;
 	int codec_powered;
 	int pll;
 	int non_lp;
@@ -1527,6 +1528,8 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 {
 	struct twl6040_data *priv;
 	struct twl4030_codec_data *pdata = dev_get_platdata(codec->dev);
+	struct platform_device *pdev = container_of(codec->dev,
+						   struct platform_device, dev);
 	int ret = 0;
 
 	priv = kzalloc(sizeof(struct twl6040_data), GFP_KERNEL);
@@ -1553,6 +1556,13 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 		priv->hf_right_step = 1;
 	}
 
+	priv->plug_irq = platform_get_irq(pdev, 0);
+	if (priv->plug_irq < 0) {
+		dev_err(codec->dev, "invalid irq\n");
+		ret = -EINVAL;
+		goto work_err;
+	}
+
 	priv->sysclk_constraints = &hp_constraints;
 	priv->workqueue = create_singlethread_workqueue("twl6040-codec");
 	if (!priv->workqueue) {
@@ -1581,9 +1591,8 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 	INIT_DELAYED_WORK(&priv->hs_delayed_work, twl6040_pga_hs_work);
 	INIT_DELAYED_WORK(&priv->hf_delayed_work, twl6040_pga_hf_work);
 
-	ret = twl6040_request_irq(codec->control_data, TWL6040_IRQ_PLUG,
-				  twl6040_audio_handler, 0,
-				  "twl6040_irq_plug", codec);
+	ret = request_threaded_irq(priv->plug_irq, NULL, twl6040_audio_handler,
+				   0, "twl6040_irq_plug", codec);
 	if (ret) {
 		dev_err(codec->dev, "PLUG IRQ request failed: %d\n", ret);
 		goto plugirq_err;
@@ -1604,7 +1613,7 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 	return 0;
 
 bias_err:
-	twl6040_free_irq(codec->control_data, TWL6040_IRQ_PLUG, codec);
+	free_irq(priv->plug_irq, codec);
 plugirq_err:
 	destroy_workqueue(priv->hs_workqueue);
 hswq_err:
@@ -1621,7 +1630,7 @@ static int twl6040_remove(struct snd_soc_codec *codec)
 	struct twl6040_data *priv = snd_soc_codec_get_drvdata(codec);
 
 	twl6040_set_bias_level(codec, SND_SOC_BIAS_OFF);
-	twl6040_free_irq(codec->control_data, TWL6040_IRQ_PLUG, codec);
+	free_irq(priv->plug_irq, codec);
 	destroy_workqueue(priv->workqueue);
 	destroy_workqueue(priv->hf_workqueue);
 	destroy_workqueue(priv->hs_workqueue);
-- 
1.7.6

[PATCH v3 4/5] MFD: twl6040: Demand valid interrupt configuration

[Peter Ujfalusi]

In order to operate correctly twl6040 needs correct
interrupt configuration.
The slave drivers (vibra, and ASoC codec) will refuse
to probe, if the interrupt configuration is not correct.
In this way some checks can be removed from the code.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/mfd/twl6040-core.c |   42 +++++++++++++++++++++---------------------
 drivers/mfd/twl6040-irq.c  |   16 +---------------
 2 files changed, 22 insertions(+), 36 deletions(-)

diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index 471f489..f71bb14 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -459,6 +459,12 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	/* In order to operate correctly we need valid interrupt config */
+	if (!pdata->naudint_irq || !pdata->irq_base) {
+		dev_err(&pdev->dev, "Invalid IRQ configuration\n");
+		return -EINVAL;
+	}
+
 	twl6040 = kzalloc(sizeof(struct twl6040), GFP_KERNEL);
 	if (!twl6040)
 		return -ENOMEM;
@@ -491,20 +497,18 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 	if (twl6040->rev == TWL6040_REV_ES1_0)
 		twl6040->audpwron = -EINVAL;
 
-	if (twl6040->irq) {
-		/* codec interrupt */
-		ret = twl6040_irq_init(twl6040);
-		if (ret)
-			goto gpio2_err;
-
-		ret = twl6040_request_irq(twl6040, TWL6040_IRQ_READY,
-					  twl6040_naudint_handler, 0,
-					  "twl6040_irq_ready", twl6040);
-		if (ret) {
-			dev_err(twl6040->dev, "READY IRQ request failed: %d\n",
-				ret);
-			goto irq_err;
-		}
+	/* codec interrupt */
+	ret = twl6040_irq_init(twl6040);
+	if (ret)
+		goto gpio2_err;
+
+	ret = twl6040_request_irq(twl6040, TWL6040_IRQ_READY,
+					twl6040_naudint_handler, 0,
+					"twl6040_irq_ready", twl6040);
+	if (ret) {
+		dev_err(twl6040->dev, "READY IRQ request failed: %d\n",
+			ret);
+		goto irq_err;
 	}
 
 	/* dual-access registers controlled by I2C only */
@@ -553,11 +557,9 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 	return 0;
 
 mfd_err:
-	if (twl6040->irq)
-		twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040);
+	twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040);
 irq_err:
-	if (twl6040->irq)
-		twl6040_irq_exit(twl6040);
+	twl6040_irq_exit(twl6040);
 gpio2_err:
 	if (gpio_is_valid(twl6040->audpwron))
 		gpio_free(twl6040->audpwron);
@@ -579,9 +581,7 @@ static int __devexit twl6040_remove(struct platform_device *pdev)
 		gpio_free(twl6040->audpwron);
 
 	twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040);
-
-	if (twl6040->irq)
-		twl6040_irq_exit(twl6040);
+	twl6040_irq_exit(twl6040);
 
 	mfd_remove_devices(&pdev->dev);
 	platform_set_drvdata(pdev, NULL);
diff --git a/drivers/mfd/twl6040-irq.c b/drivers/mfd/twl6040-irq.c
index 9380535..b3f8dda 100644
--- a/drivers/mfd/twl6040-irq.c
+++ b/drivers/mfd/twl6040-irq.c
@@ -148,19 +148,6 @@ int twl6040_irq_init(struct twl6040 *twl6040)
 	twl6040->irq_masks_cache = TWL6040_ALLINT_MSK;
 	twl6040_reg_write(twl6040, TWL6040_REG_INTMR, TWL6040_ALLINT_MSK);
 
-	if (!twl6040->irq) {
-		dev_warn(twl6040->dev,
-			 "no interrupt specified, no interrupts\n");
-		twl6040->irq_base = 0;
-		return 0;
-	}
-
-	if (!twl6040->irq_base) {
-		dev_err(twl6040->dev,
-			"no interrupt base specified, no interrupts\n");
-		return 0;
-	}
-
 	/* Register them with genirq */
 	for (cur_irq = twl6040->irq_base;
 	     cur_irq < twl6040->irq_base + ARRAY_SIZE(twl6040_irqs);
@@ -199,7 +186,6 @@ EXPORT_SYMBOL(twl6040_irq_init);
 
 void twl6040_irq_exit(struct twl6040 *twl6040)
 {
-	if (twl6040->irq)
-		free_irq(twl6040->irq, twl6040);
+	free_irq(twl6040->irq, twl6040);
 }
 EXPORT_SYMBOL(twl6040_irq_exit);
-- 
1.7.6

[PATCH v3 4/5] MFD: twl6040: Demand valid interrupt configuration

[Peter Ujfalusi]

In order to operate correctly twl6040 needs correct
interrupt configuration.
The slave drivers (vibra, and ASoC codec) will refuse
to probe, if the interrupt configuration is not correct.
In this way some checks can be removed from the code.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/mfd/twl6040-core.c |   42 +++++++++++++++++++++---------------------
 drivers/mfd/twl6040-irq.c  |   16 +---------------
 2 files changed, 22 insertions(+), 36 deletions(-)

diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index 471f489..f71bb14 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -459,6 +459,12 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	/* In order to operate correctly we need valid interrupt config */
+	if (!pdata->naudint_irq || !pdata->irq_base) {
+		dev_err(&pdev->dev, "Invalid IRQ configuration\n");
+		return -EINVAL;
+	}
+
 	twl6040 = kzalloc(sizeof(struct twl6040), GFP_KERNEL);
 	if (!twl6040)
 		return -ENOMEM;
@@ -491,20 +497,18 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 	if (twl6040->rev == TWL6040_REV_ES1_0)
 		twl6040->audpwron = -EINVAL;
 
-	if (twl6040->irq) {
-		/* codec interrupt */
-		ret = twl6040_irq_init(twl6040);
-		if (ret)
-			goto gpio2_err;
-
-		ret = twl6040_request_irq(twl6040, TWL6040_IRQ_READY,
-					  twl6040_naudint_handler, 0,
-					  "twl6040_irq_ready", twl6040);
-		if (ret) {
-			dev_err(twl6040->dev, "READY IRQ request failed: %d\n",
-				ret);
-			goto irq_err;
-		}
+	/* codec interrupt */
+	ret = twl6040_irq_init(twl6040);
+	if (ret)
+		goto gpio2_err;
+
+	ret = twl6040_request_irq(twl6040, TWL6040_IRQ_READY,
+					twl6040_naudint_handler, 0,
+					"twl6040_irq_ready", twl6040);
+	if (ret) {
+		dev_err(twl6040->dev, "READY IRQ request failed: %d\n",
+			ret);
+		goto irq_err;
 	}
 
 	/* dual-access registers controlled by I2C only */
@@ -553,11 +557,9 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 	return 0;
 
 mfd_err:
-	if (twl6040->irq)
-		twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040);
+	twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040);
 irq_err:
-	if (twl6040->irq)
-		twl6040_irq_exit(twl6040);
+	twl6040_irq_exit(twl6040);
 gpio2_err:
 	if (gpio_is_valid(twl6040->audpwron))
 		gpio_free(twl6040->audpwron);
@@ -579,9 +581,7 @@ static int __devexit twl6040_remove(struct platform_device *pdev)
 		gpio_free(twl6040->audpwron);
 
 	twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040);
-
-	if (twl6040->irq)
-		twl6040_irq_exit(twl6040);
+	twl6040_irq_exit(twl6040);
 
 	mfd_remove_devices(&pdev->dev);
 	platform_set_drvdata(pdev, NULL);
diff --git a/drivers/mfd/twl6040-irq.c b/drivers/mfd/twl6040-irq.c
index 9380535..b3f8dda 100644
--- a/drivers/mfd/twl6040-irq.c
+++ b/drivers/mfd/twl6040-irq.c
@@ -148,19 +148,6 @@ int twl6040_irq_init(struct twl6040 *twl6040)
 	twl6040->irq_masks_cache = TWL6040_ALLINT_MSK;
 	twl6040_reg_write(twl6040, TWL6040_REG_INTMR, TWL6040_ALLINT_MSK);
 
-	if (!twl6040->irq) {
-		dev_warn(twl6040->dev,
-			 "no interrupt specified, no interrupts\n");
-		twl6040->irq_base = 0;
-		return 0;
-	}
-
-	if (!twl6040->irq_base) {
-		dev_err(twl6040->dev,
-			"no interrupt base specified, no interrupts\n");
-		return 0;
-	}
-
 	/* Register them with genirq */
 	for (cur_irq = twl6040->irq_base;
 	     cur_irq < twl6040->irq_base + ARRAY_SIZE(twl6040_irqs);
@@ -199,7 +186,6 @@ EXPORT_SYMBOL(twl6040_irq_init);
 
 void twl6040_irq_exit(struct twl6040 *twl6040)
 {
-	if (twl6040->irq)
-		free_irq(twl6040->irq, twl6040);
+	free_irq(twl6040->irq, twl6040);
 }
 EXPORT_SYMBOL(twl6040_irq_exit);
-- 
1.7.6

[PATCH v3 5/5] MFD: twl6040: Remove wrapper for threaded irq request

[Peter Ujfalusi]

Remove the twl6040_request_irq/free_irq inline functions,
and use direct calls instead in the core driver to
register the threaded irq.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/mfd/twl6040-core.c  |   10 +++++-----
 include/linux/mfd/twl6040.h |   22 ----------------------
 2 files changed, 5 insertions(+), 27 deletions(-)

diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index f71bb14..6843977 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -502,9 +502,9 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 	if (ret)
 		goto gpio2_err;
 
-	ret = twl6040_request_irq(twl6040, TWL6040_IRQ_READY,
-					twl6040_naudint_handler, 0,
-					"twl6040_irq_ready", twl6040);
+	ret = request_threaded_irq(twl6040->irq_base + TWL6040_IRQ_READY,
+				   NULL, twl6040_naudint_handler, 0,
+				   "twl6040_irq_ready", twl6040);
 	if (ret) {
 		dev_err(twl6040->dev, "READY IRQ request failed: %d\n",
 			ret);
@@ -557,7 +557,7 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 	return 0;
 
 mfd_err:
-	twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040);
+	free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040);
 irq_err:
 	twl6040_irq_exit(twl6040);
 gpio2_err:
@@ -580,7 +580,7 @@ static int __devexit twl6040_remove(struct platform_device *pdev)
 	if (gpio_is_valid(twl6040->audpwron))
 		gpio_free(twl6040->audpwron);
 
-	twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040);
+	free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040);
 	twl6040_irq_exit(twl6040);
 
 	mfd_remove_devices(&pdev->dev);
diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
index c3c1de5..df890a2 100644
--- a/include/linux/mfd/twl6040.h
+++ b/include/linux/mfd/twl6040.h
@@ -215,28 +215,6 @@ struct twl6040 {
 	u8 irq_masks_cache;
 };
 
-static inline int twl6040_request_irq(struct twl6040 *twl6040, int irq,
-				      irq_handler_t handler,
-				      unsigned long irqflags,
-				      const char *name,
-				      void *data)
-{
-	if (!twl6040->irq_base)
-		return -EINVAL;
-
-	return request_threaded_irq(twl6040->irq_base + irq, NULL, handler,
-				    irqflags, name, data);
-}
-
-static inline void twl6040_free_irq(struct twl6040 *twl6040, int irq,
-				    void *data)
-{
-	if (!twl6040->irq_base)
-		return;
-
-	free_irq(twl6040->irq_base + irq, data);
-}
-
 int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg);
 int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg,
 		      u8 val);
-- 
1.7.6

[PATCH v3 5/5] MFD: twl6040: Remove wrapper for threaded irq request

[Peter Ujfalusi]

Remove the twl6040_request_irq/free_irq inline functions,
and use direct calls instead in the core driver to
register the threaded irq.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/mfd/twl6040-core.c  |   10 +++++-----
 include/linux/mfd/twl6040.h |   22 ----------------------
 2 files changed, 5 insertions(+), 27 deletions(-)

diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index f71bb14..6843977 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -502,9 +502,9 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 	if (ret)
 		goto gpio2_err;
 
-	ret = twl6040_request_irq(twl6040, TWL6040_IRQ_READY,
-					twl6040_naudint_handler, 0,
-					"twl6040_irq_ready", twl6040);
+	ret = request_threaded_irq(twl6040->irq_base + TWL6040_IRQ_READY,
+				   NULL, twl6040_naudint_handler, 0,
+				   "twl6040_irq_ready", twl6040);
 	if (ret) {
 		dev_err(twl6040->dev, "READY IRQ request failed: %d\n",
 			ret);
@@ -557,7 +557,7 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 	return 0;
 
 mfd_err:
-	twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040);
+	free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040);
 irq_err:
 	twl6040_irq_exit(twl6040);
 gpio2_err:
@@ -580,7 +580,7 @@ static int __devexit twl6040_remove(struct platform_device *pdev)
 	if (gpio_is_valid(twl6040->audpwron))
 		gpio_free(twl6040->audpwron);
 
-	twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040);
+	free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040);
 	twl6040_irq_exit(twl6040);
 
 	mfd_remove_devices(&pdev->dev);
diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
index c3c1de5..df890a2 100644
--- a/include/linux/mfd/twl6040.h
+++ b/include/linux/mfd/twl6040.h
@@ -215,28 +215,6 @@ struct twl6040 {
 	u8 irq_masks_cache;
 };
 
-static inline int twl6040_request_irq(struct twl6040 *twl6040, int irq,
-				      irq_handler_t handler,
-				      unsigned long irqflags,
-				      const char *name,
-				      void *data)
-{
-	if (!twl6040->irq_base)
-		return -EINVAL;
-
-	return request_threaded_irq(twl6040->irq_base + irq, NULL, handler,
-				    irqflags, name, data);
-}
-
-static inline void twl6040_free_irq(struct twl6040 *twl6040, int irq,
-				    void *data)
-{
-	if (!twl6040->irq_base)
-		return;
-
-	free_irq(twl6040->irq_base + irq, data);
-}
-
 int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg);
 int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg,
 		      u8 val);
-- 
1.7.6

Re: [PATCH v3 1/5] MFD: twl6040: Use resource to provide irq number for slaves

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 389 bytes --]

On Tue, Jul 05, 2011 at 10:49:32PM +0300, Peter Ujfalusi wrote:
> Provide the irq number for slaves via resource on the
> platform device.
> The irq number configuration is done in the twl6040-core
> at probe time, so machine drivers do not need to be
> modified.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

Reviewed-by: Felipe Balbi <balbi@ti.com>

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

Re: [PATCH v3 2/5] input: twl6040-vibra: Do not use wrapper for irq request

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 363 bytes --]

On Tue, Jul 05, 2011 at 10:49:33PM +0300, Peter Ujfalusi wrote:
> The twl6040_request_irq/free_irq inline functions are going
> to be removed, so replace them with direct calls.
> The irq number is provided by the core driver via resource.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

Reviewed-by: Felipe Balbi <balbi@ti.com>

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

Re: [PATCH v3 3/5] ASoC: twl6040: Do not use wrapper for irq request

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 472 bytes --]

On Tue, Jul 05, 2011 at 10:49:34PM +0300, Peter Ujfalusi wrote:
> The twl6040_request_irq/free_irq inline functions are going
> to be removed, so replace them with direct calls.
> The irq number is provided by the core driver via resource.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Reviewed-by: Felipe Balbi <balbi@ti.com>

(forget the Acked-by on previous thread :-)

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

Re: [PATCH v3 4/5] MFD: twl6040: Demand valid interrupt configuration

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 441 bytes --]

On Tue, Jul 05, 2011 at 10:49:35PM +0300, Peter Ujfalusi wrote:
> In order to operate correctly twl6040 needs correct
> interrupt configuration.
> The slave drivers (vibra, and ASoC codec) will refuse
> to probe, if the interrupt configuration is not correct.
> In this way some checks can be removed from the code.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

Reviewed-by: Felipe Balbi <balbi@ti.com>

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

Re: [PATCH v3 5/5] MFD: twl6040: Remove wrapper for threaded irq request

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 329 bytes --]

On Tue, Jul 05, 2011 at 10:49:36PM +0300, Peter Ujfalusi wrote:
> Remove the twl6040_request_irq/free_irq inline functions,
> and use direct calls instead in the core driver to
> register the threaded irq.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

Reviewed-by: Felipe Balbi <balbi@ti.com>

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

Re: [alsa-devel] [PATCH v3 0/5] MFD/input/ASoC: twl6040: irq registration changes

[Péter Ujfalusi]

Hi Samuel, Dmitry,

would you be able to take a look at this series?

Thank you,
Péter

On Tuesday 05 July 2011 21:49:31 Ujfalusi, Peter wrote:
> Hello,
> 
> Changes since v2:
> - Fix the check in the slaves driver for the validity of the received irq
> - Mark Brown's ack added to patch 3
> 
> Intro mail froim v1:
> As Samuel, and Felipe requested for the twl6040 MFD series:
> http://marc.info/?l=linux-kernel&m=130978512225430&w=2
> http://marc.info/?l=linux-omap&m=130978403224218&w=2
> 
> This is the update to remove the obfuscation around the threaded irq request
> in the twl6040 driver and it's slaves.
> 
> With this change the slaves uses directly the threaded irq request, and the
> core driver passes the irq number for the slaves to use (configured runtime,
> so machine drivers do not need to be updated).
> 
> Regards,
> Peter
> 
> PS: for the remaining comments from Samuel I have changed the series, since
> the requested change was small.
> I'm not intended to send the series again, unless it is requested (again the
> change from v6 is minimal - few lines has been removed/replaced).
> 
> ---
> Peter Ujfalusi (5):
>   MFD: twl6040: Use resource to provide irq number for slaves
>   input: twl6040-vibra: Do not use wrapper for irq request
>   ASoC: twl6040: Do not use wrapper for irq request
>   MFD: twl6040: Demand valid interrupt configuration
>   MFD: twl6040: Remove wrapper for threaded irq request
> 
>  drivers/input/misc/twl6040-vibra.c |   17 ++++++---
>  drivers/mfd/twl6040-core.c         |   69
> ++++++++++++++++++++++++----------- drivers/mfd/twl6040-irq.c          |  
> 16 +--------
>  include/linux/mfd/twl6040.h        |   22 -----------
>  sound/soc/codecs/twl6040.c         |   19 +++++++---
>  5 files changed, 74 insertions(+), 69 deletions(-)

Re: [PATCH v3 0/5] MFD/input/ASoC: twl6040: irq registration changes

[Péter Ujfalusi]

Hi Samuel, Dmitry,

would you be able to take a look at this series?

Thank you,
Péter

On Tuesday 05 July 2011 21:49:31 Ujfalusi, Peter wrote:
> Hello,
> 
> Changes since v2:
> - Fix the check in the slaves driver for the validity of the received irq
> - Mark Brown's ack added to patch 3
> 
> Intro mail froim v1:
> As Samuel, and Felipe requested for the twl6040 MFD series:
> http://marc.info/?l=linux-kernel&m=130978512225430&w=2
> http://marc.info/?l=linux-omap&m=130978403224218&w=2
> 
> This is the update to remove the obfuscation around the threaded irq request
> in the twl6040 driver and it's slaves.
> 
> With this change the slaves uses directly the threaded irq request, and the
> core driver passes the irq number for the slaves to use (configured runtime,
> so machine drivers do not need to be updated).
> 
> Regards,
> Peter
> 
> PS: for the remaining comments from Samuel I have changed the series, since
> the requested change was small.
> I'm not intended to send the series again, unless it is requested (again the
> change from v6 is minimal - few lines has been removed/replaced).
> 
> ---
> Peter Ujfalusi (5):
>   MFD: twl6040: Use resource to provide irq number for slaves
>   input: twl6040-vibra: Do not use wrapper for irq request
>   ASoC: twl6040: Do not use wrapper for irq request
>   MFD: twl6040: Demand valid interrupt configuration
>   MFD: twl6040: Remove wrapper for threaded irq request
> 
>  drivers/input/misc/twl6040-vibra.c |   17 ++++++---
>  drivers/mfd/twl6040-core.c         |   69
> ++++++++++++++++++++++++----------- drivers/mfd/twl6040-irq.c          |  
> 16 +--------
>  include/linux/mfd/twl6040.h        |   22 -----------
>  sound/soc/codecs/twl6040.c         |   19 +++++++---
>  5 files changed, 74 insertions(+), 69 deletions(-)

Re: [PATCH v3 2/5] input: twl6040-vibra: Do not use wrapper for irq request

[Dmitry Torokhov]

On Tue, Jul 05, 2011 at 10:49:33PM +0300, Peter Ujfalusi wrote:
> The twl6040_request_irq/free_irq inline functions are going
> to be removed, so replace them with direct calls.
> The irq number is provided by the core driver via resource.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

Acked-by: Dmitry Torokhov <dtormail.ru>

> ---
>  drivers/input/misc/twl6040-vibra.c |   17 ++++++++++++-----
>  1 files changed, 12 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
> index dbf745d..c43002e 100644
> --- a/drivers/input/misc/twl6040-vibra.c
> +++ b/drivers/input/misc/twl6040-vibra.c
> @@ -47,6 +47,7 @@ struct vibra_info {
>  	struct workqueue_struct *workqueue;
>  	struct work_struct play_work;
>  	struct mutex mutex;
> +	int irq;
>  
>  	bool enabled;
>  	int weak_speed;
> @@ -277,6 +278,13 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
>  		goto err_kzalloc;
>  	}
>  
> +	info->irq = platform_get_irq(pdev, 0);
> +	if (info->irq < 0) {
> +		dev_err(info->dev, "invalid irq\n");
> +		ret = -EINVAL;
> +		goto err_kzalloc;
> +	}
> +
>  	mutex_init(&info->mutex);
>  
>  	info->input_dev = input_allocate_device();
> @@ -308,9 +316,8 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, info);
>  
> -	ret = twl6040_request_irq(info->twl6040, TWL6040_IRQ_VIB,
> -				  twl6040_vib_irq_handler, 0,
> -				  "twl6040_irq_vib", info);
> +	ret = request_threaded_irq(info->irq, NULL, twl6040_vib_irq_handler, 0,
> +				   "twl6040_irq_vib", info);
>  	if (ret) {
>  		dev_err(info->dev, "VIB IRQ request failed: %d\n", ret);
>  		goto err_irq;
> @@ -360,7 +367,7 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
>  err_voltage:
>  	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
>  err_regulator:
> -	twl6040_free_irq(info->twl6040, TWL6040_IRQ_VIB, info);
> +	free_irq(info->irq, info);
>  err_irq:
>  	input_unregister_device(info->input_dev);
>  	info->input_dev = NULL;
> @@ -379,7 +386,7 @@ static int __devexit twl6040_vibra_remove(struct platform_device *pdev)
>  	struct vibra_info *info = platform_get_drvdata(pdev);
>  
>  	input_unregister_device(info->input_dev);
> -	twl6040_free_irq(info->twl6040, TWL6040_IRQ_VIB, info);
> +	free_irq(info->irq, info);
>  	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
>  	destroy_workqueue(info->workqueue);
>  	kfree(info);
> -- 
> 1.7.6
> 

-- 
Dmitry

Re: [PATCH v3 2/5] input: twl6040-vibra: Do not use wrapper for irq request

[Dmitry Torokhov]

On Tue, Jul 05, 2011 at 10:49:33PM +0300, Peter Ujfalusi wrote:
> The twl6040_request_irq/free_irq inline functions are going
> to be removed, so replace them with direct calls.
> The irq number is provided by the core driver via resource.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

Acked-by: Dmitry Torokhov <dtormail.ru>

> ---
>  drivers/input/misc/twl6040-vibra.c |   17 ++++++++++++-----
>  1 files changed, 12 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
> index dbf745d..c43002e 100644
> --- a/drivers/input/misc/twl6040-vibra.c
> +++ b/drivers/input/misc/twl6040-vibra.c
> @@ -47,6 +47,7 @@ struct vibra_info {
>  	struct workqueue_struct *workqueue;
>  	struct work_struct play_work;
>  	struct mutex mutex;
> +	int irq;
>  
>  	bool enabled;
>  	int weak_speed;
> @@ -277,6 +278,13 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
>  		goto err_kzalloc;
>  	}
>  
> +	info->irq = platform_get_irq(pdev, 0);
> +	if (info->irq < 0) {
> +		dev_err(info->dev, "invalid irq\n");
> +		ret = -EINVAL;
> +		goto err_kzalloc;
> +	}
> +
>  	mutex_init(&info->mutex);
>  
>  	info->input_dev = input_allocate_device();
> @@ -308,9 +316,8 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, info);
>  
> -	ret = twl6040_request_irq(info->twl6040, TWL6040_IRQ_VIB,
> -				  twl6040_vib_irq_handler, 0,
> -				  "twl6040_irq_vib", info);
> +	ret = request_threaded_irq(info->irq, NULL, twl6040_vib_irq_handler, 0,
> +				   "twl6040_irq_vib", info);
>  	if (ret) {
>  		dev_err(info->dev, "VIB IRQ request failed: %d\n", ret);
>  		goto err_irq;
> @@ -360,7 +367,7 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
>  err_voltage:
>  	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
>  err_regulator:
> -	twl6040_free_irq(info->twl6040, TWL6040_IRQ_VIB, info);
> +	free_irq(info->irq, info);
>  err_irq:
>  	input_unregister_device(info->input_dev);
>  	info->input_dev = NULL;
> @@ -379,7 +386,7 @@ static int __devexit twl6040_vibra_remove(struct platform_device *pdev)
>  	struct vibra_info *info = platform_get_drvdata(pdev);
>  
>  	input_unregister_device(info->input_dev);
> -	twl6040_free_irq(info->twl6040, TWL6040_IRQ_VIB, info);
> +	free_irq(info->irq, info);
>  	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
>  	destroy_workqueue(info->workqueue);
>  	kfree(info);
> -- 
> 1.7.6
> 

-- 
Dmitry

Re: [PATCH v3 1/5] MFD: twl6040: Use resource to provide irq number for slaves

[Samuel Ortiz]

Hi Peter,

On Tue, Jul 05, 2011 at 10:49:32PM +0300, Peter Ujfalusi wrote:
> Provide the irq number for slaves via resource on the
> platform device.
> The irq number configuration is done in the twl6040-core
> at probe time, so machine drivers do not need to be
> modified.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>

Cheers,
Samuel.

-- 
Intel Open Source Technology Centre
http://oss.intel.com/

Re: [PATCH v3 4/5] MFD: twl6040: Demand valid interrupt configuration

[Samuel Ortiz]

Hi Peter,

On Tue, Jul 05, 2011 at 10:49:35PM +0300, Peter Ujfalusi wrote:
> In order to operate correctly twl6040 needs correct
> interrupt configuration.
> The slave drivers (vibra, and ASoC codec) will refuse
> to probe, if the interrupt configuration is not correct.
> In this way some checks can be removed from the code.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>

Cheers,
Samuel.

-- 
Intel Open Source Technology Centre
http://oss.intel.com/

Re: [PATCH v3 5/5] MFD: twl6040: Remove wrapper for threaded irq request

[Samuel Ortiz]

Hi Peter,

On Tue, Jul 05, 2011 at 10:49:36PM +0300, Peter Ujfalusi wrote:
> Remove the twl6040_request_irq/free_irq inline functions,
> and use direct calls instead in the core driver to
> register the threaded irq.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>

Cheers,
Samuel.

-- 
Intel Open Source Technology Centre
http://oss.intel.com/