* [GIT PULL] omap twl cleanup for v3.1 merge window
@ 2011-07-08 13:01 ` Tony Lindgren
0 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2011-07-08 13:01 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, linux-omap, Nicolas Pitre, Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 2917 bytes --]
Hi Arnd,
Please pull TWL cleanup from:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git cleanup-part-2
This can be pulled into your omap/cleanup. It will cause a minor
merge conflict with omap/board.
I've attached a conflict resolution patch too, it's trivial execpt
note that .vdac needs to be removed in board-rx51-peripherals.c.
If this conflict causes problems for you, I can also base this series
on omap/board.
Regards,
Tony
The following changes since commit 48cb1258e8b0f8c81cfb699b42326c5b2147b3f8:
Tony Lindgren (1):
Merge branch 'for_3.1/pm-misc' of git://git.kernel.org/.../khilman/linux-omap-pm into devel-cleanup
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git cleanup-part-2
Jarkko Nikula (2):
omap: mcbsp: Remove rx_/tx_word_length variables
omap: mcbsp: Remove port number enums
Peter Ujfalusi (4):
OMAP: New twl-common for common TWL configuration
OMAP4: Move common twl6030 configuration to twl-common
OMAP3: Move common twl configuration to twl-common
OMAP3: Move common regulator configuration to twl-common
Tony Lindgren (1):
Merge branch 'peter/topic/for-tony_mach-cleanup' of git://gitorious.org/omap-audio/linux-audio into cleanup-part-2
arch/arm/mach-omap1/mcbsp.c | 4 +-
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/board-3430sdp.c | 89 +-------
arch/arm/mach-omap2/board-4430sdp.c | 141 +-----------
arch/arm/mach-omap2/board-cm-t35.c | 51 +----
arch/arm/mach-omap2/board-devkit8000.c | 38 +---
arch/arm/mach-omap2/board-igep0020.c | 44 +---
arch/arm/mach-omap2/board-ldp.c | 15 +-
arch/arm/mach-omap2/board-omap3beagle.c | 62 +-----
arch/arm/mach-omap2/board-omap3evm.c | 70 +------
arch/arm/mach-omap2/board-omap3pandora.c | 62 +-----
arch/arm/mach-omap2/board-omap3stalker.c | 72 +------
arch/arm/mach-omap2/board-omap3touchbook.c | 61 +----
arch/arm/mach-omap2/board-omap4panda.c | 146 +-----------
arch/arm/mach-omap2/board-overo.c | 61 +-----
arch/arm/mach-omap2/board-rm680.c | 8 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 40 +---
arch/arm/mach-omap2/board-zoom-peripherals.c | 89 +-------
arch/arm/mach-omap2/common-board-devices.c | 21 --
arch/arm/mach-omap2/common-board-devices.h | 26 +--
arch/arm/mach-omap2/twl-common.c | 304 ++++++++++++++++++++++++++
arch/arm/mach-omap2/twl-common.h | 59 +++++
arch/arm/plat-omap/include/plat/mcbsp.h | 12 +-
arch/arm/plat-omap/mcbsp.c | 3 -
24 files changed, 492 insertions(+), 988 deletions(-)
create mode 100644 arch/arm/mach-omap2/twl-common.c
create mode 100644 arch/arm/mach-omap2/twl-common.h
[-- Attachment #2: resolve.patch --]
[-- Type: text/x-diff, Size: 2584 bytes --]
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@@ -572,75 -395,10 +509,62 @@@ static struct regulator_init_data sdp44
},
};
+static struct regulator_init_data sdp4430_vana = {
+ .constraints = {
+ .min_uV = 2100000,
+ .max_uV = 2100000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data sdp4430_vcxio = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data sdp4430_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data sdp4430_vusb = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data sdp4430_clk32kg = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .always_on = true,
+ },
+};
+
static struct twl4030_platform_data sdp4430_twldata = {
- .irq_base = TWL6030_IRQ_BASE,
- .irq_end = TWL6030_IRQ_END,
-
/* Regulators */
- .vmmc = &sdp4430_vmmc,
- .vpp = &sdp4430_vpp,
.vusim = &sdp4430_vusim,
- .vana = &sdp4430_vana,
- .vcxio = &sdp4430_vcxio,
- .vdac = &sdp4430_vdac,
- .vusb = &sdp4430_vusb,
.vaux1 = &sdp4430_vaux1,
- .vaux2 = &sdp4430_vaux2,
- .vaux3 = &sdp4430_vaux3,
- .clk32kg = &sdp4430_clk32kg,
- .usb = &omap4_usbphy_data
};
static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@@ -916,13 -761,7 +884,12 @@@ static struct twl4030_platform_data rx5
.vaux2 = &rx51_vaux2,
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
+ .vpll1 = &rx51_vpll1,
+ .vpll2 = &rx51_vpll2,
.vsim = &rx51_vsim,
- .vdac = &rx51_vdac,
+ .vintana1 = &rx51_vintana1,
+ .vintana2 = &rx51_vintana2,
+ .vintdig = &rx51_vintdig,
.vio = &rx51_vio,
};
^ permalink raw reply [flat|nested] 10+ messages in thread* [GIT PULL] omap twl cleanup for v3.1 merge window
@ 2011-07-08 13:01 ` Tony Lindgren
0 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2011-07-08 13:01 UTC (permalink / raw)
To: linux-arm-kernel
Hi Arnd,
Please pull TWL cleanup from:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git cleanup-part-2
This can be pulled into your omap/cleanup. It will cause a minor
merge conflict with omap/board.
I've attached a conflict resolution patch too, it's trivial execpt
note that .vdac needs to be removed in board-rx51-peripherals.c.
If this conflict causes problems for you, I can also base this series
on omap/board.
Regards,
Tony
The following changes since commit 48cb1258e8b0f8c81cfb699b42326c5b2147b3f8:
Tony Lindgren (1):
Merge branch 'for_3.1/pm-misc' of git://git.kernel.org/.../khilman/linux-omap-pm into devel-cleanup
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git cleanup-part-2
Jarkko Nikula (2):
omap: mcbsp: Remove rx_/tx_word_length variables
omap: mcbsp: Remove port number enums
Peter Ujfalusi (4):
OMAP: New twl-common for common TWL configuration
OMAP4: Move common twl6030 configuration to twl-common
OMAP3: Move common twl configuration to twl-common
OMAP3: Move common regulator configuration to twl-common
Tony Lindgren (1):
Merge branch 'peter/topic/for-tony_mach-cleanup' of git://gitorious.org/omap-audio/linux-audio into cleanup-part-2
arch/arm/mach-omap1/mcbsp.c | 4 +-
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/board-3430sdp.c | 89 +-------
arch/arm/mach-omap2/board-4430sdp.c | 141 +-----------
arch/arm/mach-omap2/board-cm-t35.c | 51 +----
arch/arm/mach-omap2/board-devkit8000.c | 38 +---
arch/arm/mach-omap2/board-igep0020.c | 44 +---
arch/arm/mach-omap2/board-ldp.c | 15 +-
arch/arm/mach-omap2/board-omap3beagle.c | 62 +-----
arch/arm/mach-omap2/board-omap3evm.c | 70 +------
arch/arm/mach-omap2/board-omap3pandora.c | 62 +-----
arch/arm/mach-omap2/board-omap3stalker.c | 72 +------
arch/arm/mach-omap2/board-omap3touchbook.c | 61 +----
arch/arm/mach-omap2/board-omap4panda.c | 146 +-----------
arch/arm/mach-omap2/board-overo.c | 61 +-----
arch/arm/mach-omap2/board-rm680.c | 8 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 40 +---
arch/arm/mach-omap2/board-zoom-peripherals.c | 89 +-------
arch/arm/mach-omap2/common-board-devices.c | 21 --
arch/arm/mach-omap2/common-board-devices.h | 26 +--
arch/arm/mach-omap2/twl-common.c | 304 ++++++++++++++++++++++++++
arch/arm/mach-omap2/twl-common.h | 59 +++++
arch/arm/plat-omap/include/plat/mcbsp.h | 12 +-
arch/arm/plat-omap/mcbsp.c | 3 -
24 files changed, 492 insertions(+), 988 deletions(-)
create mode 100644 arch/arm/mach-omap2/twl-common.c
create mode 100644 arch/arm/mach-omap2/twl-common.h
-------------- next part --------------
A non-text attachment was scrubbed...
Name: resolve.patch
Type: text/x-diff
Size: 2584 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110708/a96bac57/attachment.bin>
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [GIT PULL] omap twl cleanup for v3.1 merge window
2011-07-08 13:01 ` Tony Lindgren
@ 2011-07-08 15:41 ` Arnd Bergmann
-1 siblings, 0 replies; 10+ messages in thread
From: Arnd Bergmann @ 2011-07-08 15:41 UTC (permalink / raw)
To: Tony Lindgren
Cc: linux-arm-kernel, linux-omap, Nicolas Pitre, Thomas Gleixner
On Friday 08 July 2011, Tony Lindgren wrote:
>
>I've attached a conflict resolution patch too, it's trivial execpt
>note that .vdac needs to be removed in board-rx51-peripherals.c.
>
>If this conflict causes problems for you, I can also base this series
>on omap/board.
The conflict resolution you suggested doesn't build here:
> --- a/arch/arm/mach-omap2/board-4430sdp.c
> +++ b/arch/arm/mach-omap2/board-4430sdp.c
> @@@ -572,75 -395,10 +509,62 @@@ static struct regulator_init_data sdp44
> },
> };
>
> +static struct regulator_init_data sdp4430_vana = {
> + .constraints = {
> + .min_uV = 2100000,
> + .max_uV = 2100000,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> +};
> +
> +static struct regulator_init_data sdp4430_vcxio = {
> + .constraints = {
> + .min_uV = 1800000,
> + .max_uV = 1800000,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> +};
> +
> +static struct regulator_init_data sdp4430_vdac = {
> + .constraints = {
> + .min_uV = 1800000,
> + .max_uV = 1800000,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> +};
> +
> +static struct regulator_init_data sdp4430_vusb = {
> + .constraints = {
> + .min_uV = 3300000,
> + .max_uV = 3300000,
> + .apply_uV = true,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> +};
> +
> +static struct regulator_init_data sdp4430_clk32kg = {
> + .constraints = {
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> + .always_on = true,
> + },
> +};
These are removed in the cleanup series, but changed in the fixes branch,
now the removal is undone
> static struct twl4030_platform_data sdp4430_twldata = {
> - .irq_base = TWL6030_IRQ_BASE,
> - .irq_end = TWL6030_IRQ_END,
> -
> /* Regulators */
> - .vmmc = &sdp4430_vmmc,
> - .vpp = &sdp4430_vpp,
> .vusim = &sdp4430_vusim,
> - .vana = &sdp4430_vana,
> - .vcxio = &sdp4430_vcxio,
> - .vdac = &sdp4430_vdac,
> - .vusb = &sdp4430_vusb,
> .vaux1 = &sdp4430_vaux1,
> - .vaux2 = &sdp4430_vaux2,
> - .vaux3 = &sdp4430_vaux3,
> - .clk32kg = &sdp4430_clk32kg,
> - .usb = &omap4_usbphy_data
> };
>
but the references remain.
I tried a different path, but then got
arch/arm/mach-omap2/board-4430sdp.c:406:41: warning: 'sdp4430_vmmc_supply' defined but not used [-Wunused-variable]
Should that variable be removed or kept referenced?
Arnd
^ permalink raw reply [flat|nested] 10+ messages in thread* [GIT PULL] omap twl cleanup for v3.1 merge window
@ 2011-07-08 15:41 ` Arnd Bergmann
0 siblings, 0 replies; 10+ messages in thread
From: Arnd Bergmann @ 2011-07-08 15:41 UTC (permalink / raw)
To: linux-arm-kernel
On Friday 08 July 2011, Tony Lindgren wrote:
>
>I've attached a conflict resolution patch too, it's trivial execpt
>note that .vdac needs to be removed in board-rx51-peripherals.c.
>
>If this conflict causes problems for you, I can also base this series
>on omap/board.
The conflict resolution you suggested doesn't build here:
> --- a/arch/arm/mach-omap2/board-4430sdp.c
> +++ b/arch/arm/mach-omap2/board-4430sdp.c
> @@@ -572,75 -395,10 +509,62 @@@ static struct regulator_init_data sdp44
> },
> };
>
> +static struct regulator_init_data sdp4430_vana = {
> + .constraints = {
> + .min_uV = 2100000,
> + .max_uV = 2100000,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> +};
> +
> +static struct regulator_init_data sdp4430_vcxio = {
> + .constraints = {
> + .min_uV = 1800000,
> + .max_uV = 1800000,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> +};
> +
> +static struct regulator_init_data sdp4430_vdac = {
> + .constraints = {
> + .min_uV = 1800000,
> + .max_uV = 1800000,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> +};
> +
> +static struct regulator_init_data sdp4430_vusb = {
> + .constraints = {
> + .min_uV = 3300000,
> + .max_uV = 3300000,
> + .apply_uV = true,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> +};
> +
> +static struct regulator_init_data sdp4430_clk32kg = {
> + .constraints = {
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> + .always_on = true,
> + },
> +};
These are removed in the cleanup series, but changed in the fixes branch,
now the removal is undone
> static struct twl4030_platform_data sdp4430_twldata = {
> - .irq_base = TWL6030_IRQ_BASE,
> - .irq_end = TWL6030_IRQ_END,
> -
> /* Regulators */
> - .vmmc = &sdp4430_vmmc,
> - .vpp = &sdp4430_vpp,
> .vusim = &sdp4430_vusim,
> - .vana = &sdp4430_vana,
> - .vcxio = &sdp4430_vcxio,
> - .vdac = &sdp4430_vdac,
> - .vusb = &sdp4430_vusb,
> .vaux1 = &sdp4430_vaux1,
> - .vaux2 = &sdp4430_vaux2,
> - .vaux3 = &sdp4430_vaux3,
> - .clk32kg = &sdp4430_clk32kg,
> - .usb = &omap4_usbphy_data
> };
>
but the references remain.
I tried a different path, but then got
arch/arm/mach-omap2/board-4430sdp.c:406:41: warning: 'sdp4430_vmmc_supply' defined but not used [-Wunused-variable]
Should that variable be removed or kept referenced?
Arnd
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [GIT PULL] omap twl cleanup for v3.1 merge window
2011-07-08 15:41 ` Arnd Bergmann
@ 2011-07-10 6:55 ` Tony Lindgren
-1 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2011-07-10 6:55 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, linux-omap, Nicolas Pitre, Thomas Gleixner
* Arnd Bergmann <arnd@arndb.de> [110708 08:36]:
> On Friday 08 July 2011, Tony Lindgren wrote:
> >
> >I've attached a conflict resolution patch too, it's trivial execpt
> >note that .vdac needs to be removed in board-rx51-peripherals.c.
> >
> >If this conflict causes problems for you, I can also base this series
> >on omap/board.
>
> The conflict resolution you suggested doesn't build here:
...
>
> These are removed in the cleanup series, but changed in the fixes branch,
> now the removal is undone
Hmm these are added in omap/board. Maybe the issue is caused by not
merging omap/board also?
> I tried a different path, but then got
>
> arch/arm/mach-omap2/board-4430sdp.c:406:41: warning: 'sdp4430_vmmc_supply' defined but not used [-Wunused-variable]
>
> Should that variable be removed or kept referenced?
That's added in omap/board. I think the resolution I posted
should work if you merge omap/cleanup omap/fixes and omap/board
into your master branch.
Or maybe I'm missing something. If you want, I can try out your
merge here too.
Regards,
Tony
^ permalink raw reply [flat|nested] 10+ messages in thread
* [GIT PULL] omap twl cleanup for v3.1 merge window
@ 2011-07-10 6:55 ` Tony Lindgren
0 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2011-07-10 6:55 UTC (permalink / raw)
To: linux-arm-kernel
* Arnd Bergmann <arnd@arndb.de> [110708 08:36]:
> On Friday 08 July 2011, Tony Lindgren wrote:
> >
> >I've attached a conflict resolution patch too, it's trivial execpt
> >note that .vdac needs to be removed in board-rx51-peripherals.c.
> >
> >If this conflict causes problems for you, I can also base this series
> >on omap/board.
>
> The conflict resolution you suggested doesn't build here:
...
>
> These are removed in the cleanup series, but changed in the fixes branch,
> now the removal is undone
Hmm these are added in omap/board. Maybe the issue is caused by not
merging omap/board also?
> I tried a different path, but then got
>
> arch/arm/mach-omap2/board-4430sdp.c:406:41: warning: 'sdp4430_vmmc_supply' defined but not used [-Wunused-variable]
>
> Should that variable be removed or kept referenced?
That's added in omap/board. I think the resolution I posted
should work if you merge omap/cleanup omap/fixes and omap/board
into your master branch.
Or maybe I'm missing something. If you want, I can try out your
merge here too.
Regards,
Tony
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [GIT PULL] omap twl cleanup for v3.1 merge window
2011-07-10 6:55 ` Tony Lindgren
@ 2011-07-10 10:17 ` Tony Lindgren
-1 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2011-07-10 10:17 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, linux-omap, Nicolas Pitre, Thomas Gleixner
* Tony Lindgren <tony@atomide.com> [110709 23:50]:
> * Arnd Bergmann <arnd@arndb.de> [110708 08:36]:
> > On Friday 08 July 2011, Tony Lindgren wrote:
> > >
> > >I've attached a conflict resolution patch too, it's trivial execpt
> > >note that .vdac needs to be removed in board-rx51-peripherals.c.
> > >
> > >If this conflict causes problems for you, I can also base this series
> > >on omap/board.
> >
> > The conflict resolution you suggested doesn't build here:
> ...
>
> >
> > These are removed in the cleanup series, but changed in the fixes branch,
> > now the removal is undone
>
> Hmm these are added in omap/board. Maybe the issue is caused by not
> merging omap/board also?
Looks like what got added in in omap/board should now work with the
TWL default values in twl-common.c. So most likely those can just be
dropped. Will check that today.
Regards,
Tony
^ permalink raw reply [flat|nested] 10+ messages in thread
* [GIT PULL] omap twl cleanup for v3.1 merge window
@ 2011-07-10 10:17 ` Tony Lindgren
0 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2011-07-10 10:17 UTC (permalink / raw)
To: linux-arm-kernel
* Tony Lindgren <tony@atomide.com> [110709 23:50]:
> * Arnd Bergmann <arnd@arndb.de> [110708 08:36]:
> > On Friday 08 July 2011, Tony Lindgren wrote:
> > >
> > >I've attached a conflict resolution patch too, it's trivial execpt
> > >note that .vdac needs to be removed in board-rx51-peripherals.c.
> > >
> > >If this conflict causes problems for you, I can also base this series
> > >on omap/board.
> >
> > The conflict resolution you suggested doesn't build here:
> ...
>
> >
> > These are removed in the cleanup series, but changed in the fixes branch,
> > now the removal is undone
>
> Hmm these are added in omap/board. Maybe the issue is caused by not
> merging omap/board also?
Looks like what got added in in omap/board should now work with the
TWL default values in twl-common.c. So most likely those can just be
dropped. Will check that today.
Regards,
Tony
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [GIT PULL] omap twl cleanup for v3.1 merge window
2011-07-10 10:17 ` Tony Lindgren
@ 2011-07-10 19:50 ` Tony Lindgren
-1 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2011-07-10 19:50 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Thomas Gleixner, linux-omap, linux-arm-kernel, Nicolas Pitre
* Tony Lindgren <tony@atomide.com> [110710 03:12]:
> * Tony Lindgren <tony@atomide.com> [110709 23:50]:
> > * Arnd Bergmann <arnd@arndb.de> [110708 08:36]:
> > > On Friday 08 July 2011, Tony Lindgren wrote:
> > > >
> > > >I've attached a conflict resolution patch too, it's trivial execpt
> > > >note that .vdac needs to be removed in board-rx51-peripherals.c.
> > > >
> > > >If this conflict causes problems for you, I can also base this series
> > > >on omap/board.
> > >
> > > The conflict resolution you suggested doesn't build here:
> > ...
> >
> > >
> > > These are removed in the cleanup series, but changed in the fixes branch,
> > > now the removal is undone
> >
> > Hmm these are added in omap/board. Maybe the issue is caused by not
> > merging omap/board also?
>
> Looks like what got added in in omap/board should now work with the
> TWL default values in twl-common.c. So most likely those can just be
> dropped. Will check that today.
Yes most of it can be dropped for 4430sdp, but the merge is a pain.
I've merged cleanup-part-2 into my devel-board so if you pull that
into your omap/board, and merge omap/board into your master
branch things should be sorted out. The updated devel-board is at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git devel-board
The new top commit at 1ad920556f32a5a127397ca461d1a1faaf22c4e0.
As omap/board already depends on omap/cleanup, this does not cause
new dependency issues. I've also added the resolve patch below.
Regards,
Tony
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@@ -411,41 -324,6 +403,37 @@@ static struct regulator_consumer_suppl
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
- static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
- };
-
+static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
+ .supply = "vmmc",
+ .dev_name = "omap_hsmmc.4",
+};
+
+static struct regulator_init_data sdp4430_vmmc5 = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap4_sdp4430_vmmc5_supply,
+};
+
+static struct fixed_voltage_config sdp4430_vwlan = {
+ .supply_name = "vwl1271",
+ .microvolts = 1800000, /* 1.8V */
+ .gpio = GPIO_WIFI_PMENA,
+ .startup_delay = 70000, /* 70msec */
+ .enable_high = 1,
+ .enabled_at_boot = 0,
+ .init_data = &sdp4430_vmmc5,
+};
+
+static struct platform_device omap_vwlan_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &sdp4430_vwlan,
+ },
+};
+
static int omap4_twl6030_hsmmc_late_init(struct device *dev)
{
int ret = 0;
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@@ -916,13 -761,7 +884,12 @@@ static struct twl4030_platform_data rx5
.vaux2 = &rx51_vaux2,
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
+ .vpll1 = &rx51_vpll1,
+ .vpll2 = &rx51_vpll2,
.vsim = &rx51_vsim,
- .vdac = &rx51_vdac,
+ .vintana1 = &rx51_vintana1,
+ .vintana2 = &rx51_vintana2,
+ .vintdig = &rx51_vintdig,
.vio = &rx51_vio,
};
^ permalink raw reply [flat|nested] 10+ messages in thread* [GIT PULL] omap twl cleanup for v3.1 merge window
@ 2011-07-10 19:50 ` Tony Lindgren
0 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2011-07-10 19:50 UTC (permalink / raw)
To: linux-arm-kernel
* Tony Lindgren <tony@atomide.com> [110710 03:12]:
> * Tony Lindgren <tony@atomide.com> [110709 23:50]:
> > * Arnd Bergmann <arnd@arndb.de> [110708 08:36]:
> > > On Friday 08 July 2011, Tony Lindgren wrote:
> > > >
> > > >I've attached a conflict resolution patch too, it's trivial execpt
> > > >note that .vdac needs to be removed in board-rx51-peripherals.c.
> > > >
> > > >If this conflict causes problems for you, I can also base this series
> > > >on omap/board.
> > >
> > > The conflict resolution you suggested doesn't build here:
> > ...
> >
> > >
> > > These are removed in the cleanup series, but changed in the fixes branch,
> > > now the removal is undone
> >
> > Hmm these are added in omap/board. Maybe the issue is caused by not
> > merging omap/board also?
>
> Looks like what got added in in omap/board should now work with the
> TWL default values in twl-common.c. So most likely those can just be
> dropped. Will check that today.
Yes most of it can be dropped for 4430sdp, but the merge is a pain.
I've merged cleanup-part-2 into my devel-board so if you pull that
into your omap/board, and merge omap/board into your master
branch things should be sorted out. The updated devel-board is at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git devel-board
The new top commit at 1ad920556f32a5a127397ca461d1a1faaf22c4e0.
As omap/board already depends on omap/cleanup, this does not cause
new dependency issues. I've also added the resolve patch below.
Regards,
Tony
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@@ -411,41 -324,6 +403,37 @@@ static struct regulator_consumer_suppl
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
- static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
- };
-
+static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
+ .supply = "vmmc",
+ .dev_name = "omap_hsmmc.4",
+};
+
+static struct regulator_init_data sdp4430_vmmc5 = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap4_sdp4430_vmmc5_supply,
+};
+
+static struct fixed_voltage_config sdp4430_vwlan = {
+ .supply_name = "vwl1271",
+ .microvolts = 1800000, /* 1.8V */
+ .gpio = GPIO_WIFI_PMENA,
+ .startup_delay = 70000, /* 70msec */
+ .enable_high = 1,
+ .enabled_at_boot = 0,
+ .init_data = &sdp4430_vmmc5,
+};
+
+static struct platform_device omap_vwlan_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &sdp4430_vwlan,
+ },
+};
+
static int omap4_twl6030_hsmmc_late_init(struct device *dev)
{
int ret = 0;
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@@ -916,13 -761,7 +884,12 @@@ static struct twl4030_platform_data rx5
.vaux2 = &rx51_vaux2,
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
+ .vpll1 = &rx51_vpll1,
+ .vpll2 = &rx51_vpll2,
.vsim = &rx51_vsim,
- .vdac = &rx51_vdac,
+ .vintana1 = &rx51_vintana1,
+ .vintana2 = &rx51_vintana2,
+ .vintdig = &rx51_vintdig,
.vio = &rx51_vio,
};
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2011-07-10 19:50 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-07-08 13:01 [GIT PULL] omap twl cleanup for v3.1 merge window Tony Lindgren
2011-07-08 13:01 ` Tony Lindgren
2011-07-08 15:41 ` Arnd Bergmann
2011-07-08 15:41 ` Arnd Bergmann
2011-07-10 6:55 ` Tony Lindgren
2011-07-10 6:55 ` Tony Lindgren
2011-07-10 10:17 ` Tony Lindgren
2011-07-10 10:17 ` Tony Lindgren
2011-07-10 19:50 ` Tony Lindgren
2011-07-10 19:50 ` Tony Lindgren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.