* [PATCH v3 00/11] bcma: add support for embedded devices like bcm4716
@ 2011-07-22 23:20 ` Hauke Mehrtens
0 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
This patch series adds support for embedded devices like bcm47xx to
bcma. Bcma is used on bcm4716 and bcm4718 SoCs as the system bus and
replaced ssb used on older devices. With these patches my bcm4716
device boots up till it tries to access the flash, because the serial
flash chip is unsupported for now, this will be my next task. This adds
support for MIPS cores, interrupt configuration and the serial console.
These patches are not containing all functions needed to get the SoC to
fully work and support every feature, but it is a good start.
These patches are now integrated in OpenWrt for everyone how wants to
test them.
This was tested with a BCM4704 device (SoC with ssb bus), a BCM4716
device and a pcie wireless card supported by bcma.
@John could you please merge this into wireless-testing. I hope Ralf is
fine with it when some MIPS bits will go through wireless. This will
make it much easier for Linus to merge wireless-testing and the mips
tree together as there are many other changes for bcma in wireless-
testing.
PATCH v3:
* rebase on wireless-testing master-2011-07-22-2
* remove BCMA_HOSTTYPE_NONE
* add Acked-by Rafał
* rename bcm47xx_active_bus_type to bcm47xx_bus_type
* set core->dev.dma_mask and core->dma_dev for SoC
* fix comment
PATCH v2:
* define inline function bcma_core_mips_init() if mips driver is not build
* iounmap core->io_wrap and core->io_addr after it was used.
* update bcma based on new braodcom driver code
* add workaround for 5357b0
* move flash informations into own struct and store it in chipcommon.
When adding serial flash support it will be in chipcommon and then all flash structs should be there.
* some changes to bcma_chipco_serial_init()
* some changes are done after looking into a more recent version of broadcom driver.
* changes suggested by Jonas
* serial struct is in chipcommon as it is accessed through chipcommon.
* use bcma_pmu_alp_clock() to get the clock.
* cpu clock: add detection support for some newer SoCs.
PATCH v1:
* rebased on mips tree (mips/queue)
* drop pcie hostmode patch as Rafał sent a better patch to wireless mailing list
* drop sprom patch because sprom is not supported in bcma version from mips tree,
I will send a separate patch to wireless mailing list.
* fix compilation of arch/mips/bcm47xx/wgt634u.c
* fix texts in arch/mips/bcm47xx/Kconfig
RFC v3:
* make bcm47xx built either with bcma, ssb or both and use mips MIPS 74K optimizations if possible
* add block io support
* some minor fixes for code and doku
RFC v2:
* use list and no arry to store cores
* rename bcma_host_bcma_ to bcma_host_soc_
* use core->io_addr and core->io_wrap to access cores
* checkpatch fixes
* some minor fixes
Hauke Mehrtens (11):
bcma: move parsing of EEPROM into own function.
bcma: move initializing of struct bcma_bus to own function.
bcma: add functions to scan cores needed on SoCs
bcma: add SOC bus
bcma: add mips driver
bcma: add serial console support
bcma: get CPU clock
bcm47xx: prepare to support different buses
bcm47xx: make it possible to build bcm47xx without ssb.
bcm47xx: add support for bcma bus
bcm47xx: fix irq assignment for new SoCs.
arch/mips/Kconfig | 8 +-
arch/mips/bcm47xx/Kconfig | 31 +++
arch/mips/bcm47xx/Makefile | 3 +-
arch/mips/bcm47xx/gpio.c | 82 +++++--
arch/mips/bcm47xx/irq.c | 12 +
arch/mips/bcm47xx/nvram.c | 29 ++-
arch/mips/bcm47xx/serial.c | 46 ++++-
arch/mips/bcm47xx/setup.c | 90 ++++++-
arch/mips/bcm47xx/time.c | 16 +-
arch/mips/bcm47xx/wgt634u.c | 14 +-
arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 26 ++-
arch/mips/include/asm/mach-bcm47xx/gpio.h | 108 +++++++--
arch/mips/pci/pci-bcm47xx.c | 6 +
drivers/bcma/Kconfig | 13 +
drivers/bcma/Makefile | 2 +
drivers/bcma/bcma_private.h | 16 ++
drivers/bcma/core.c | 2 +
drivers/bcma/driver_chipcommon.c | 53 ++++
drivers/bcma/driver_chipcommon_pmu.c | 133 ++++++++++
drivers/bcma/driver_mips.c | 256 +++++++++++++++++++
drivers/bcma/driver_pci.c | 14 +-
drivers/bcma/host_soc.c | 183 ++++++++++++++
drivers/bcma/main.c | 70 +++++-
drivers/bcma/scan.c | 348 ++++++++++++++++++--------
drivers/watchdog/bcm47xx_wdt.c | 27 ++-
include/linux/bcma/bcma.h | 9 +-
include/linux/bcma/bcma_driver_chipcommon.h | 67 +++++
include/linux/bcma/bcma_driver_mips.h | 51 ++++
include/linux/bcma/bcma_soc.h | 16 ++
29 files changed, 1549 insertions(+), 182 deletions(-)
create mode 100644 arch/mips/bcm47xx/Kconfig
create mode 100644 drivers/bcma/driver_mips.c
create mode 100644 drivers/bcma/host_soc.c
create mode 100644 include/linux/bcma/bcma_driver_mips.h
create mode 100644 include/linux/bcma/bcma_soc.h
--
1.7.4.1
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v3 00/11] bcma: add support for embedded devices like bcm4716
@ 2011-07-22 23:20 ` Hauke Mehrtens
0 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
This patch series adds support for embedded devices like bcm47xx to
bcma. Bcma is used on bcm4716 and bcm4718 SoCs as the system bus and
replaced ssb used on older devices. With these patches my bcm4716
device boots up till it tries to access the flash, because the serial
flash chip is unsupported for now, this will be my next task. This adds
support for MIPS cores, interrupt configuration and the serial console.
These patches are not containing all functions needed to get the SoC to
fully work and support every feature, but it is a good start.
These patches are now integrated in OpenWrt for everyone how wants to
test them.
This was tested with a BCM4704 device (SoC with ssb bus), a BCM4716
device and a pcie wireless card supported by bcma.
@John could you please merge this into wireless-testing. I hope Ralf is
fine with it when some MIPS bits will go through wireless. This will
make it much easier for Linus to merge wireless-testing and the mips
tree together as there are many other changes for bcma in wireless-
testing.
PATCH v3:
* rebase on wireless-testing master-2011-07-22-2
* remove BCMA_HOSTTYPE_NONE
* add Acked-by Rafa?
* rename bcm47xx_active_bus_type to bcm47xx_bus_type
* set core->dev.dma_mask and core->dma_dev for SoC
* fix comment
PATCH v2:
* define inline function bcma_core_mips_init() if mips driver is not build
* iounmap core->io_wrap and core->io_addr after it was used.
* update bcma based on new braodcom driver code
* add workaround for 5357b0
* move flash informations into own struct and store it in chipcommon.
When adding serial flash support it will be in chipcommon and then all flash structs should be there.
* some changes to bcma_chipco_serial_init()
* some changes are done after looking into a more recent version of broadcom driver.
* changes suggested by Jonas
* serial struct is in chipcommon as it is accessed through chipcommon.
* use bcma_pmu_alp_clock() to get the clock.
* cpu clock: add detection support for some newer SoCs.
PATCH v1:
* rebased on mips tree (mips/queue)
* drop pcie hostmode patch as Rafa? sent a better patch to wireless mailing list
* drop sprom patch because sprom is not supported in bcma version from mips tree,
I will send a separate patch to wireless mailing list.
* fix compilation of arch/mips/bcm47xx/wgt634u.c
* fix texts in arch/mips/bcm47xx/Kconfig
RFC v3:
* make bcm47xx built either with bcma, ssb or both and use mips MIPS 74K optimizations if possible
* add block io support
* some minor fixes for code and doku
RFC v2:
* use list and no arry to store cores
* rename bcma_host_bcma_ to bcma_host_soc_
* use core->io_addr and core->io_wrap to access cores
* checkpatch fixes
* some minor fixes
Hauke Mehrtens (11):
bcma: move parsing of EEPROM into own function.
bcma: move initializing of struct bcma_bus to own function.
bcma: add functions to scan cores needed on SoCs
bcma: add SOC bus
bcma: add mips driver
bcma: add serial console support
bcma: get CPU clock
bcm47xx: prepare to support different buses
bcm47xx: make it possible to build bcm47xx without ssb.
bcm47xx: add support for bcma bus
bcm47xx: fix irq assignment for new SoCs.
arch/mips/Kconfig | 8 +-
arch/mips/bcm47xx/Kconfig | 31 +++
arch/mips/bcm47xx/Makefile | 3 +-
arch/mips/bcm47xx/gpio.c | 82 +++++--
arch/mips/bcm47xx/irq.c | 12 +
arch/mips/bcm47xx/nvram.c | 29 ++-
arch/mips/bcm47xx/serial.c | 46 ++++-
arch/mips/bcm47xx/setup.c | 90 ++++++-
arch/mips/bcm47xx/time.c | 16 +-
arch/mips/bcm47xx/wgt634u.c | 14 +-
arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 26 ++-
arch/mips/include/asm/mach-bcm47xx/gpio.h | 108 +++++++--
arch/mips/pci/pci-bcm47xx.c | 6 +
drivers/bcma/Kconfig | 13 +
drivers/bcma/Makefile | 2 +
drivers/bcma/bcma_private.h | 16 ++
drivers/bcma/core.c | 2 +
drivers/bcma/driver_chipcommon.c | 53 ++++
drivers/bcma/driver_chipcommon_pmu.c | 133 ++++++++++
drivers/bcma/driver_mips.c | 256 +++++++++++++++++++
drivers/bcma/driver_pci.c | 14 +-
drivers/bcma/host_soc.c | 183 ++++++++++++++
drivers/bcma/main.c | 70 +++++-
drivers/bcma/scan.c | 348 ++++++++++++++++++--------
drivers/watchdog/bcm47xx_wdt.c | 27 ++-
include/linux/bcma/bcma.h | 9 +-
include/linux/bcma/bcma_driver_chipcommon.h | 67 +++++
include/linux/bcma/bcma_driver_mips.h | 51 ++++
include/linux/bcma/bcma_soc.h | 16 ++
29 files changed, 1549 insertions(+), 182 deletions(-)
create mode 100644 arch/mips/bcm47xx/Kconfig
create mode 100644 drivers/bcma/driver_mips.c
create mode 100644 drivers/bcma/host_soc.c
create mode 100644 include/linux/bcma/bcma_driver_mips.h
create mode 100644 include/linux/bcma/bcma_soc.h
--
1.7.4.1
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 01/11] bcma: move parsing of EEPROM into own function.
2011-07-22 23:20 ` Hauke Mehrtens
@ 2011-07-22 23:20 ` Hauke Mehrtens
-1 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
Move the parsing of the EEPROM data in scan function for one core into
an own function. Now we are able to use it in some other scan function
as well.
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/bcma/scan.c | 230 ++++++++++++++++++++++++++-------------------------
1 files changed, 118 insertions(+), 112 deletions(-)
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index 40d7dcc..4012d8d 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -200,16 +200,124 @@ static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
return addrl;
}
+static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
+ struct bcma_device *core)
+{
+ s32 tmp;
+ u8 i, j;
+ s32 cia, cib;
+ u8 ports[2], wrappers[2];
+
+ /* get CIs */
+ cia = bcma_erom_get_ci(bus, eromptr);
+ if (cia < 0) {
+ bcma_erom_push_ent(eromptr);
+ if (bcma_erom_is_end(bus, eromptr))
+ return -ESPIPE;
+ return -EILSEQ;
+ }
+ cib = bcma_erom_get_ci(bus, eromptr);
+ if (cib < 0)
+ return -EILSEQ;
+
+ /* parse CIs */
+ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
+ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
+ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
+ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
+ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
+ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
+ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
+ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
+
+ if (((core->id.manuf == BCMA_MANUF_ARM) &&
+ (core->id.id == 0xFFF)) ||
+ (ports[1] == 0)) {
+ bcma_erom_skip_component(bus, eromptr);
+ return -ENXIO;
+ }
+
+ /* check if component is a core at all */
+ if (wrappers[0] + wrappers[1] == 0) {
+ /* we could save addrl of the router
+ if (cid == BCMA_CORE_OOB_ROUTER)
+ */
+ bcma_erom_skip_component(bus, eromptr);
+ return -ENXIO;
+ }
+
+ if (bcma_erom_is_bridge(bus, eromptr)) {
+ bcma_erom_skip_component(bus, eromptr);
+ return -ENXIO;
+ }
+
+ /* get & parse master ports */
+ for (i = 0; i < ports[0]; i++) {
+ u32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr);
+ if (mst_port_d < 0)
+ return -EILSEQ;
+ }
+
+ /* get & parse slave ports */
+ for (i = 0; i < ports[1]; i++) {
+ for (j = 0; ; j++) {
+ tmp = bcma_erom_get_addr_desc(bus, eromptr,
+ SCAN_ADDR_TYPE_SLAVE, i);
+ if (tmp < 0) {
+ /* no more entries for port _i_ */
+ /* pr_debug("erom: slave port %d "
+ * "has %d descriptors\n", i, j); */
+ break;
+ } else {
+ if (i == 0 && j == 0)
+ core->addr = tmp;
+ }
+ }
+ }
+
+ /* get & parse master wrappers */
+ for (i = 0; i < wrappers[0]; i++) {
+ for (j = 0; ; j++) {
+ tmp = bcma_erom_get_addr_desc(bus, eromptr,
+ SCAN_ADDR_TYPE_MWRAP, i);
+ if (tmp < 0) {
+ /* no more entries for port _i_ */
+ /* pr_debug("erom: master wrapper %d "
+ * "has %d descriptors\n", i, j); */
+ break;
+ } else {
+ if (i == 0 && j == 0)
+ core->wrap = tmp;
+ }
+ }
+ }
+
+ /* get & parse slave wrappers */
+ for (i = 0; i < wrappers[1]; i++) {
+ u8 hack = (ports[1] == 1) ? 0 : 1;
+ for (j = 0; ; j++) {
+ tmp = bcma_erom_get_addr_desc(bus, eromptr,
+ SCAN_ADDR_TYPE_SWRAP, i + hack);
+ if (tmp < 0) {
+ /* no more entries for port _i_ */
+ /* pr_debug("erom: master wrapper %d "
+ * has %d descriptors\n", i, j); */
+ break;
+ } else {
+ if (wrappers[0] == 0 && !i && !j)
+ core->wrap = tmp;
+ }
+ }
+ }
+ return 0;
+}
+
int bcma_bus_scan(struct bcma_bus *bus)
{
u32 erombase;
u32 __iomem *eromptr, *eromend;
- s32 cia, cib;
- u8 ports[2], wrappers[2];
-
s32 tmp;
- u8 i, j;
int err;
@@ -236,112 +344,13 @@ int bcma_bus_scan(struct bcma_bus *bus)
INIT_LIST_HEAD(&core->list);
core->bus = bus;
- /* get CIs */
- cia = bcma_erom_get_ci(bus, &eromptr);
- if (cia < 0) {
- bcma_erom_push_ent(&eromptr);
- if (bcma_erom_is_end(bus, &eromptr))
- break;
- err= -EILSEQ;
- goto out;
- }
- cib = bcma_erom_get_ci(bus, &eromptr);
- if (cib < 0) {
- err= -EILSEQ;
- goto out;
- }
-
- /* parse CIs */
- core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
- core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
- core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
- ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
- ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
- wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
- wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
- core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
-
- if (((core->id.manuf == BCMA_MANUF_ARM) &&
- (core->id.id == 0xFFF)) ||
- (ports[1] == 0)) {
- bcma_erom_skip_component(bus, &eromptr);
- continue;
- }
-
- /* check if component is a core at all */
- if (wrappers[0] + wrappers[1] == 0) {
- /* we could save addrl of the router
- if (cid == BCMA_CORE_OOB_ROUTER)
- */
- bcma_erom_skip_component(bus, &eromptr);
- continue;
- }
-
- if (bcma_erom_is_bridge(bus, &eromptr)) {
- bcma_erom_skip_component(bus, &eromptr);
+ err = bcma_get_next_core(bus, &eromptr, core);
+ if (err == -ENXIO)
continue;
- }
-
- /* get & parse master ports */
- for (i = 0; i < ports[0]; i++) {
- u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr);
- if (mst_port_d < 0) {
- err= -EILSEQ;
- goto out;
- }
- }
-
- /* get & parse slave ports */
- for (i = 0; i < ports[1]; i++) {
- for (j = 0; ; j++) {
- tmp = bcma_erom_get_addr_desc(bus, &eromptr,
- SCAN_ADDR_TYPE_SLAVE, i);
- if (tmp < 0) {
- /* no more entries for port _i_ */
- /* pr_debug("erom: slave port %d "
- * "has %d descriptors\n", i, j); */
- break;
- } else {
- if (i == 0 && j == 0)
- core->addr = tmp;
- }
- }
- }
-
- /* get & parse master wrappers */
- for (i = 0; i < wrappers[0]; i++) {
- for (j = 0; ; j++) {
- tmp = bcma_erom_get_addr_desc(bus, &eromptr,
- SCAN_ADDR_TYPE_MWRAP, i);
- if (tmp < 0) {
- /* no more entries for port _i_ */
- /* pr_debug("erom: master wrapper %d "
- * "has %d descriptors\n", i, j); */
- break;
- } else {
- if (i == 0 && j == 0)
- core->wrap = tmp;
- }
- }
- }
-
- /* get & parse slave wrappers */
- for (i = 0; i < wrappers[1]; i++) {
- u8 hack = (ports[1] == 1) ? 0 : 1;
- for (j = 0; ; j++) {
- tmp = bcma_erom_get_addr_desc(bus, &eromptr,
- SCAN_ADDR_TYPE_SWRAP, i + hack);
- if (tmp < 0) {
- /* no more entries for port _i_ */
- /* pr_debug("erom: master wrapper %d "
- * has %d descriptors\n", i, j); */
- break;
- } else {
- if (wrappers[0] == 0 && !i && !j)
- core->wrap = tmp;
- }
- }
- }
+ else if (err == -ESPIPE)
+ break;
+ else if (err < 0)
+ return err;
pr_info("Core %d found: %s "
"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
@@ -351,9 +360,6 @@ int bcma_bus_scan(struct bcma_bus *bus)
core->core_index = bus->nr_cores++;
list_add(&core->list, &bus->cores);
- continue;
-out:
- return err;
}
return 0;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 01/11] bcma: move parsing of EEPROM into own function.
@ 2011-07-22 23:20 ` Hauke Mehrtens
0 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
Move the parsing of the EEPROM data in scan function for one core into
an own function. Now we are able to use it in some other scan function
as well.
Acked-by: Rafa? Mi?ecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/bcma/scan.c | 230 ++++++++++++++++++++++++++-------------------------
1 files changed, 118 insertions(+), 112 deletions(-)
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index 40d7dcc..4012d8d 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -200,16 +200,124 @@ static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
return addrl;
}
+static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
+ struct bcma_device *core)
+{
+ s32 tmp;
+ u8 i, j;
+ s32 cia, cib;
+ u8 ports[2], wrappers[2];
+
+ /* get CIs */
+ cia = bcma_erom_get_ci(bus, eromptr);
+ if (cia < 0) {
+ bcma_erom_push_ent(eromptr);
+ if (bcma_erom_is_end(bus, eromptr))
+ return -ESPIPE;
+ return -EILSEQ;
+ }
+ cib = bcma_erom_get_ci(bus, eromptr);
+ if (cib < 0)
+ return -EILSEQ;
+
+ /* parse CIs */
+ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
+ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
+ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
+ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
+ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
+ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
+ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
+ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
+
+ if (((core->id.manuf == BCMA_MANUF_ARM) &&
+ (core->id.id == 0xFFF)) ||
+ (ports[1] == 0)) {
+ bcma_erom_skip_component(bus, eromptr);
+ return -ENXIO;
+ }
+
+ /* check if component is a core at all */
+ if (wrappers[0] + wrappers[1] == 0) {
+ /* we could save addrl of the router
+ if (cid == BCMA_CORE_OOB_ROUTER)
+ */
+ bcma_erom_skip_component(bus, eromptr);
+ return -ENXIO;
+ }
+
+ if (bcma_erom_is_bridge(bus, eromptr)) {
+ bcma_erom_skip_component(bus, eromptr);
+ return -ENXIO;
+ }
+
+ /* get & parse master ports */
+ for (i = 0; i < ports[0]; i++) {
+ u32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr);
+ if (mst_port_d < 0)
+ return -EILSEQ;
+ }
+
+ /* get & parse slave ports */
+ for (i = 0; i < ports[1]; i++) {
+ for (j = 0; ; j++) {
+ tmp = bcma_erom_get_addr_desc(bus, eromptr,
+ SCAN_ADDR_TYPE_SLAVE, i);
+ if (tmp < 0) {
+ /* no more entries for port _i_ */
+ /* pr_debug("erom: slave port %d "
+ * "has %d descriptors\n", i, j); */
+ break;
+ } else {
+ if (i == 0 && j == 0)
+ core->addr = tmp;
+ }
+ }
+ }
+
+ /* get & parse master wrappers */
+ for (i = 0; i < wrappers[0]; i++) {
+ for (j = 0; ; j++) {
+ tmp = bcma_erom_get_addr_desc(bus, eromptr,
+ SCAN_ADDR_TYPE_MWRAP, i);
+ if (tmp < 0) {
+ /* no more entries for port _i_ */
+ /* pr_debug("erom: master wrapper %d "
+ * "has %d descriptors\n", i, j); */
+ break;
+ } else {
+ if (i == 0 && j == 0)
+ core->wrap = tmp;
+ }
+ }
+ }
+
+ /* get & parse slave wrappers */
+ for (i = 0; i < wrappers[1]; i++) {
+ u8 hack = (ports[1] == 1) ? 0 : 1;
+ for (j = 0; ; j++) {
+ tmp = bcma_erom_get_addr_desc(bus, eromptr,
+ SCAN_ADDR_TYPE_SWRAP, i + hack);
+ if (tmp < 0) {
+ /* no more entries for port _i_ */
+ /* pr_debug("erom: master wrapper %d "
+ * has %d descriptors\n", i, j); */
+ break;
+ } else {
+ if (wrappers[0] == 0 && !i && !j)
+ core->wrap = tmp;
+ }
+ }
+ }
+ return 0;
+}
+
int bcma_bus_scan(struct bcma_bus *bus)
{
u32 erombase;
u32 __iomem *eromptr, *eromend;
- s32 cia, cib;
- u8 ports[2], wrappers[2];
-
s32 tmp;
- u8 i, j;
int err;
@@ -236,112 +344,13 @@ int bcma_bus_scan(struct bcma_bus *bus)
INIT_LIST_HEAD(&core->list);
core->bus = bus;
- /* get CIs */
- cia = bcma_erom_get_ci(bus, &eromptr);
- if (cia < 0) {
- bcma_erom_push_ent(&eromptr);
- if (bcma_erom_is_end(bus, &eromptr))
- break;
- err= -EILSEQ;
- goto out;
- }
- cib = bcma_erom_get_ci(bus, &eromptr);
- if (cib < 0) {
- err= -EILSEQ;
- goto out;
- }
-
- /* parse CIs */
- core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
- core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
- core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
- ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
- ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
- wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
- wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
- core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
-
- if (((core->id.manuf == BCMA_MANUF_ARM) &&
- (core->id.id == 0xFFF)) ||
- (ports[1] == 0)) {
- bcma_erom_skip_component(bus, &eromptr);
- continue;
- }
-
- /* check if component is a core at all */
- if (wrappers[0] + wrappers[1] == 0) {
- /* we could save addrl of the router
- if (cid == BCMA_CORE_OOB_ROUTER)
- */
- bcma_erom_skip_component(bus, &eromptr);
- continue;
- }
-
- if (bcma_erom_is_bridge(bus, &eromptr)) {
- bcma_erom_skip_component(bus, &eromptr);
+ err = bcma_get_next_core(bus, &eromptr, core);
+ if (err == -ENXIO)
continue;
- }
-
- /* get & parse master ports */
- for (i = 0; i < ports[0]; i++) {
- u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr);
- if (mst_port_d < 0) {
- err= -EILSEQ;
- goto out;
- }
- }
-
- /* get & parse slave ports */
- for (i = 0; i < ports[1]; i++) {
- for (j = 0; ; j++) {
- tmp = bcma_erom_get_addr_desc(bus, &eromptr,
- SCAN_ADDR_TYPE_SLAVE, i);
- if (tmp < 0) {
- /* no more entries for port _i_ */
- /* pr_debug("erom: slave port %d "
- * "has %d descriptors\n", i, j); */
- break;
- } else {
- if (i == 0 && j == 0)
- core->addr = tmp;
- }
- }
- }
-
- /* get & parse master wrappers */
- for (i = 0; i < wrappers[0]; i++) {
- for (j = 0; ; j++) {
- tmp = bcma_erom_get_addr_desc(bus, &eromptr,
- SCAN_ADDR_TYPE_MWRAP, i);
- if (tmp < 0) {
- /* no more entries for port _i_ */
- /* pr_debug("erom: master wrapper %d "
- * "has %d descriptors\n", i, j); */
- break;
- } else {
- if (i == 0 && j == 0)
- core->wrap = tmp;
- }
- }
- }
-
- /* get & parse slave wrappers */
- for (i = 0; i < wrappers[1]; i++) {
- u8 hack = (ports[1] == 1) ? 0 : 1;
- for (j = 0; ; j++) {
- tmp = bcma_erom_get_addr_desc(bus, &eromptr,
- SCAN_ADDR_TYPE_SWRAP, i + hack);
- if (tmp < 0) {
- /* no more entries for port _i_ */
- /* pr_debug("erom: master wrapper %d "
- * has %d descriptors\n", i, j); */
- break;
- } else {
- if (wrappers[0] == 0 && !i && !j)
- core->wrap = tmp;
- }
- }
- }
+ else if (err == -ESPIPE)
+ break;
+ else if (err < 0)
+ return err;
pr_info("Core %d found: %s "
"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
@@ -351,9 +360,6 @@ int bcma_bus_scan(struct bcma_bus *bus)
core->core_index = bus->nr_cores++;
list_add(&core->list, &bus->cores);
- continue;
-out:
- return err;
}
return 0;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 02/11] bcma: move initializing of struct bcma_bus to own function.
2011-07-22 23:20 ` Hauke Mehrtens
@ 2011-07-22 23:20 ` Hauke Mehrtens
-1 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
This makes it possible to use this code in some other method.
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/bcma/scan.c | 17 +++++++++++------
1 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index 4012d8d..7970553 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -312,15 +312,10 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
return 0;
}
-int bcma_bus_scan(struct bcma_bus *bus)
+static void bcma_init_bus(struct bcma_bus *bus)
{
- u32 erombase;
- u32 __iomem *eromptr, *eromend;
-
s32 tmp;
- int err;
-
INIT_LIST_HEAD(&bus->cores);
bus->nr_cores = 0;
@@ -330,6 +325,16 @@ int bcma_bus_scan(struct bcma_bus *bus)
bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
+}
+
+int bcma_bus_scan(struct bcma_bus *bus)
+{
+ u32 erombase;
+ u32 __iomem *eromptr, *eromend;
+
+ int err;
+
+ bcma_init_bus(bus);
erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
eromptr = bus->mmio;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 02/11] bcma: move initializing of struct bcma_bus to own function.
@ 2011-07-22 23:20 ` Hauke Mehrtens
0 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
This makes it possible to use this code in some other method.
Acked-by: Rafa? Mi?ecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/bcma/scan.c | 17 +++++++++++------
1 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index 4012d8d..7970553 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -312,15 +312,10 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
return 0;
}
-int bcma_bus_scan(struct bcma_bus *bus)
+static void bcma_init_bus(struct bcma_bus *bus)
{
- u32 erombase;
- u32 __iomem *eromptr, *eromend;
-
s32 tmp;
- int err;
-
INIT_LIST_HEAD(&bus->cores);
bus->nr_cores = 0;
@@ -330,6 +325,16 @@ int bcma_bus_scan(struct bcma_bus *bus)
bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
+}
+
+int bcma_bus_scan(struct bcma_bus *bus)
+{
+ u32 erombase;
+ u32 __iomem *eromptr, *eromend;
+
+ int err;
+
+ bcma_init_bus(bus);
erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
eromptr = bus->mmio;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 03/11] bcma: add functions to scan cores needed on SoCs
2011-07-22 23:20 ` Hauke Mehrtens
@ 2011-07-22 23:20 ` Hauke Mehrtens
-1 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
The chip common and mips core have to be setup early in the boot
process to get the cpu clock.
bcma_bus_early_register() gets pointers to some space to store the core
data and searches for the chip common and mips core and initializes
chip common. After that was done and the kernel is out of early boot we
just have to run bcma_bus_register() and it will search for the other
cores, initialize and register them.
The cores are getting the same numbers as before.
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/bcma/bcma_private.h | 7 ++
drivers/bcma/driver_chipcommon.c | 5 ++
drivers/bcma/driver_pci.c | 5 ++
drivers/bcma/main.c | 46 +++++++++++++
drivers/bcma/scan.c | 95 +++++++++++++++++++++++++--
include/linux/bcma/bcma.h | 1 +
include/linux/bcma/bcma_driver_chipcommon.h | 1 +
7 files changed, 154 insertions(+), 6 deletions(-)
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
index e02ff21..b97633d 100644
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -15,9 +15,16 @@ struct bcma_bus;
/* main.c */
int bcma_bus_register(struct bcma_bus *bus);
void bcma_bus_unregister(struct bcma_bus *bus);
+int __init bcma_bus_early_register(struct bcma_bus *bus,
+ struct bcma_device *core_cc,
+ struct bcma_device *core_mips);
/* scan.c */
int bcma_bus_scan(struct bcma_bus *bus);
+int __init bcma_bus_scan_early(struct bcma_bus *bus,
+ struct bcma_device_id *match,
+ struct bcma_device *core);
+void bcma_init_bus(struct bcma_bus *bus);
/* sprom.c */
int bcma_sprom_get(struct bcma_bus *bus);
diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
index fb54302..75f1ad7 100644
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -26,6 +26,9 @@ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
u32 leddc_on = 10;
u32 leddc_off = 90;
+ if (cc->setup_done)
+ return;
+
if (cc->core->id.rev >= 11)
cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
@@ -52,6 +55,8 @@ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
(leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
}
+
+ cc->setup_done = true;
}
/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
index dc6f34a..bdd3bc9 100644
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -187,6 +187,9 @@ static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
void bcma_core_pci_init(struct bcma_drv_pci *pc)
{
+ if (pc->setup_done)
+ return;
+
if (bcma_core_pci_is_in_hostmode(pc)) {
#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
bcma_core_pci_hostmode_init(pc);
@@ -196,6 +199,8 @@ void bcma_core_pci_init(struct bcma_drv_pci *pc)
} else {
bcma_core_pci_clientmode_init(pc);
}
+
+ pc->setup_done = true;
}
int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index 873e2e4..360a289 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -169,6 +169,52 @@ void bcma_bus_unregister(struct bcma_bus *bus)
bcma_unregister_cores(bus);
}
+int __init bcma_bus_early_register(struct bcma_bus *bus,
+ struct bcma_device *core_cc,
+ struct bcma_device *core_mips)
+{
+ int err;
+ struct bcma_device *core;
+ struct bcma_device_id match;
+
+ bcma_init_bus(bus);
+
+ match.manuf = BCMA_MANUF_BCM;
+ match.id = BCMA_CORE_CHIPCOMMON;
+ match.class = BCMA_CL_SIM;
+ match.rev = BCMA_ANY_REV;
+
+ /* Scan for chip common core */
+ err = bcma_bus_scan_early(bus, &match, core_cc);
+ if (err) {
+ pr_err("Failed to scan for common core: %d\n", err);
+ return -1;
+ }
+
+ match.manuf = BCMA_MANUF_MIPS;
+ match.id = BCMA_CORE_MIPS_74K;
+ match.class = BCMA_CL_SIM;
+ match.rev = BCMA_ANY_REV;
+
+ /* Scan for mips core */
+ err = bcma_bus_scan_early(bus, &match, core_mips);
+ if (err) {
+ pr_err("Failed to scan for mips core: %d\n", err);
+ return -1;
+ }
+
+ /* Init CC core */
+ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
+ if (core) {
+ bus->drv_cc.core = core;
+ bcma_core_chipcommon_init(&bus->drv_cc);
+ }
+
+ pr_info("Early bus registered\n");
+
+ return 0;
+}
+
int __bcma_driver_register(struct bcma_driver *drv, struct module *owner)
{
drv->drv.name = drv->name;
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index 7970553..bf9f806 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -200,7 +200,20 @@ static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
return addrl;
}
+static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus,
+ u16 index)
+{
+ struct bcma_device *core;
+
+ list_for_each_entry(core, &bus->cores, list) {
+ if (core->core_index == index)
+ return core;
+ }
+ return NULL;
+}
+
static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
+ struct bcma_device_id *match, int core_num,
struct bcma_device *core)
{
s32 tmp;
@@ -251,6 +264,21 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
return -ENXIO;
}
+ if (bcma_find_core_by_index(bus, core_num)) {
+ bcma_erom_skip_component(bus, eromptr);
+ return -ENODEV;
+ }
+
+ if (match && ((match->manuf != BCMA_ANY_MANUF &&
+ match->manuf != core->id.manuf) ||
+ (match->id != BCMA_ANY_ID && match->id != core->id.id) ||
+ (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) ||
+ (match->class != BCMA_ANY_CLASS && match->class != core->id.class)
+ )) {
+ bcma_erom_skip_component(bus, eromptr);
+ return -ENODEV;
+ }
+
/* get & parse master ports */
for (i = 0; i < ports[0]; i++) {
u32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr);
@@ -312,10 +340,13 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
return 0;
}
-static void bcma_init_bus(struct bcma_bus *bus)
+void bcma_init_bus(struct bcma_bus *bus)
{
s32 tmp;
+ if (bus->init_done)
+ return;
+
INIT_LIST_HEAD(&bus->cores);
bus->nr_cores = 0;
@@ -325,6 +356,7 @@ static void bcma_init_bus(struct bcma_bus *bus)
bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
+ bus->init_done = true;
}
int bcma_bus_scan(struct bcma_bus *bus)
@@ -332,7 +364,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
u32 erombase;
u32 __iomem *eromptr, *eromend;
- int err;
+ int err, core_num = 0;
bcma_init_bus(bus);
@@ -349,23 +381,74 @@ int bcma_bus_scan(struct bcma_bus *bus)
INIT_LIST_HEAD(&core->list);
core->bus = bus;
- err = bcma_get_next_core(bus, &eromptr, core);
- if (err == -ENXIO)
+ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core);
+ if (err == -ENODEV) {
+ core_num++;
+ continue;
+ } else if (err == -ENXIO)
continue;
else if (err == -ESPIPE)
break;
else if (err < 0)
return err;
+ core->core_index = core_num++;
+ bus->nr_cores++;
+
pr_info("Core %d found: %s "
"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
- bus->nr_cores, bcma_device_name(&core->id),
+ core->core_index, bcma_device_name(&core->id),
core->id.manuf, core->id.id, core->id.rev,
core->id.class);
- core->core_index = bus->nr_cores++;
list_add(&core->list, &bus->cores);
}
return 0;
}
+
+int __init bcma_bus_scan_early(struct bcma_bus *bus,
+ struct bcma_device_id *match,
+ struct bcma_device *core)
+{
+ u32 erombase;
+ u32 __iomem *eromptr, *eromend;
+
+ int err, core_num = 0;
+
+ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
+ eromptr = bus->mmio;
+ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
+
+ bcma_scan_switch_core(bus, erombase);
+
+ while (eromptr < eromend) {
+ memset(core, 0, sizeof(*core));
+ INIT_LIST_HEAD(&core->list);
+ core->bus = bus;
+
+ err = bcma_get_next_core(bus, &eromptr, match, core_num, core);
+ if (err == -ENODEV) {
+ core_num++;
+ continue;
+ } else if (err == -ENXIO)
+ continue;
+ else if (err == -ESPIPE)
+ break;
+ else if (err < 0)
+ return err;
+
+ core->core_index = core_num++;
+ bus->nr_cores++;
+ pr_info("Core %d found: %s "
+ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+ core->core_index, bcma_device_name(&core->id),
+ core->id.manuf, core->id.id, core->id.rev,
+ core->id.class);
+
+ list_add(&core->list, &bus->cores);
+ return 0;
+ }
+
+ return -ENODEV;
+}
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 8c96654..e31c9b4 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -190,6 +190,7 @@ struct bcma_bus {
struct bcma_device *mapped_core;
struct list_head cores;
u8 nr_cores;
+ u8 init_done:1;
struct bcma_drv_cc drv_cc;
struct bcma_drv_pci drv_pci;
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index a0f6846..c8b4cf7 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -252,6 +252,7 @@ struct bcma_drv_cc {
u32 status;
u32 capabilities;
u32 capabilities_ext;
+ u8 setup_done:1;
/* Fast Powerup Delay constant */
u16 fast_pwrup_delay;
struct bcma_chipcommon_pmu pmu;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 03/11] bcma: add functions to scan cores needed on SoCs
@ 2011-07-22 23:20 ` Hauke Mehrtens
0 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
The chip common and mips core have to be setup early in the boot
process to get the cpu clock.
bcma_bus_early_register() gets pointers to some space to store the core
data and searches for the chip common and mips core and initializes
chip common. After that was done and the kernel is out of early boot we
just have to run bcma_bus_register() and it will search for the other
cores, initialize and register them.
The cores are getting the same numbers as before.
Acked-by: Rafa? Mi?ecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/bcma/bcma_private.h | 7 ++
drivers/bcma/driver_chipcommon.c | 5 ++
drivers/bcma/driver_pci.c | 5 ++
drivers/bcma/main.c | 46 +++++++++++++
drivers/bcma/scan.c | 95 +++++++++++++++++++++++++--
include/linux/bcma/bcma.h | 1 +
include/linux/bcma/bcma_driver_chipcommon.h | 1 +
7 files changed, 154 insertions(+), 6 deletions(-)
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
index e02ff21..b97633d 100644
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -15,9 +15,16 @@ struct bcma_bus;
/* main.c */
int bcma_bus_register(struct bcma_bus *bus);
void bcma_bus_unregister(struct bcma_bus *bus);
+int __init bcma_bus_early_register(struct bcma_bus *bus,
+ struct bcma_device *core_cc,
+ struct bcma_device *core_mips);
/* scan.c */
int bcma_bus_scan(struct bcma_bus *bus);
+int __init bcma_bus_scan_early(struct bcma_bus *bus,
+ struct bcma_device_id *match,
+ struct bcma_device *core);
+void bcma_init_bus(struct bcma_bus *bus);
/* sprom.c */
int bcma_sprom_get(struct bcma_bus *bus);
diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
index fb54302..75f1ad7 100644
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -26,6 +26,9 @@ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
u32 leddc_on = 10;
u32 leddc_off = 90;
+ if (cc->setup_done)
+ return;
+
if (cc->core->id.rev >= 11)
cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
@@ -52,6 +55,8 @@ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
(leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
}
+
+ cc->setup_done = true;
}
/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
index dc6f34a..bdd3bc9 100644
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -187,6 +187,9 @@ static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
void bcma_core_pci_init(struct bcma_drv_pci *pc)
{
+ if (pc->setup_done)
+ return;
+
if (bcma_core_pci_is_in_hostmode(pc)) {
#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
bcma_core_pci_hostmode_init(pc);
@@ -196,6 +199,8 @@ void bcma_core_pci_init(struct bcma_drv_pci *pc)
} else {
bcma_core_pci_clientmode_init(pc);
}
+
+ pc->setup_done = true;
}
int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index 873e2e4..360a289 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -169,6 +169,52 @@ void bcma_bus_unregister(struct bcma_bus *bus)
bcma_unregister_cores(bus);
}
+int __init bcma_bus_early_register(struct bcma_bus *bus,
+ struct bcma_device *core_cc,
+ struct bcma_device *core_mips)
+{
+ int err;
+ struct bcma_device *core;
+ struct bcma_device_id match;
+
+ bcma_init_bus(bus);
+
+ match.manuf = BCMA_MANUF_BCM;
+ match.id = BCMA_CORE_CHIPCOMMON;
+ match.class = BCMA_CL_SIM;
+ match.rev = BCMA_ANY_REV;
+
+ /* Scan for chip common core */
+ err = bcma_bus_scan_early(bus, &match, core_cc);
+ if (err) {
+ pr_err("Failed to scan for common core: %d\n", err);
+ return -1;
+ }
+
+ match.manuf = BCMA_MANUF_MIPS;
+ match.id = BCMA_CORE_MIPS_74K;
+ match.class = BCMA_CL_SIM;
+ match.rev = BCMA_ANY_REV;
+
+ /* Scan for mips core */
+ err = bcma_bus_scan_early(bus, &match, core_mips);
+ if (err) {
+ pr_err("Failed to scan for mips core: %d\n", err);
+ return -1;
+ }
+
+ /* Init CC core */
+ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
+ if (core) {
+ bus->drv_cc.core = core;
+ bcma_core_chipcommon_init(&bus->drv_cc);
+ }
+
+ pr_info("Early bus registered\n");
+
+ return 0;
+}
+
int __bcma_driver_register(struct bcma_driver *drv, struct module *owner)
{
drv->drv.name = drv->name;
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index 7970553..bf9f806 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -200,7 +200,20 @@ static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
return addrl;
}
+static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus,
+ u16 index)
+{
+ struct bcma_device *core;
+
+ list_for_each_entry(core, &bus->cores, list) {
+ if (core->core_index == index)
+ return core;
+ }
+ return NULL;
+}
+
static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
+ struct bcma_device_id *match, int core_num,
struct bcma_device *core)
{
s32 tmp;
@@ -251,6 +264,21 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
return -ENXIO;
}
+ if (bcma_find_core_by_index(bus, core_num)) {
+ bcma_erom_skip_component(bus, eromptr);
+ return -ENODEV;
+ }
+
+ if (match && ((match->manuf != BCMA_ANY_MANUF &&
+ match->manuf != core->id.manuf) ||
+ (match->id != BCMA_ANY_ID && match->id != core->id.id) ||
+ (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) ||
+ (match->class != BCMA_ANY_CLASS && match->class != core->id.class)
+ )) {
+ bcma_erom_skip_component(bus, eromptr);
+ return -ENODEV;
+ }
+
/* get & parse master ports */
for (i = 0; i < ports[0]; i++) {
u32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr);
@@ -312,10 +340,13 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
return 0;
}
-static void bcma_init_bus(struct bcma_bus *bus)
+void bcma_init_bus(struct bcma_bus *bus)
{
s32 tmp;
+ if (bus->init_done)
+ return;
+
INIT_LIST_HEAD(&bus->cores);
bus->nr_cores = 0;
@@ -325,6 +356,7 @@ static void bcma_init_bus(struct bcma_bus *bus)
bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
+ bus->init_done = true;
}
int bcma_bus_scan(struct bcma_bus *bus)
@@ -332,7 +364,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
u32 erombase;
u32 __iomem *eromptr, *eromend;
- int err;
+ int err, core_num = 0;
bcma_init_bus(bus);
@@ -349,23 +381,74 @@ int bcma_bus_scan(struct bcma_bus *bus)
INIT_LIST_HEAD(&core->list);
core->bus = bus;
- err = bcma_get_next_core(bus, &eromptr, core);
- if (err == -ENXIO)
+ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core);
+ if (err == -ENODEV) {
+ core_num++;
+ continue;
+ } else if (err == -ENXIO)
continue;
else if (err == -ESPIPE)
break;
else if (err < 0)
return err;
+ core->core_index = core_num++;
+ bus->nr_cores++;
+
pr_info("Core %d found: %s "
"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
- bus->nr_cores, bcma_device_name(&core->id),
+ core->core_index, bcma_device_name(&core->id),
core->id.manuf, core->id.id, core->id.rev,
core->id.class);
- core->core_index = bus->nr_cores++;
list_add(&core->list, &bus->cores);
}
return 0;
}
+
+int __init bcma_bus_scan_early(struct bcma_bus *bus,
+ struct bcma_device_id *match,
+ struct bcma_device *core)
+{
+ u32 erombase;
+ u32 __iomem *eromptr, *eromend;
+
+ int err, core_num = 0;
+
+ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
+ eromptr = bus->mmio;
+ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
+
+ bcma_scan_switch_core(bus, erombase);
+
+ while (eromptr < eromend) {
+ memset(core, 0, sizeof(*core));
+ INIT_LIST_HEAD(&core->list);
+ core->bus = bus;
+
+ err = bcma_get_next_core(bus, &eromptr, match, core_num, core);
+ if (err == -ENODEV) {
+ core_num++;
+ continue;
+ } else if (err == -ENXIO)
+ continue;
+ else if (err == -ESPIPE)
+ break;
+ else if (err < 0)
+ return err;
+
+ core->core_index = core_num++;
+ bus->nr_cores++;
+ pr_info("Core %d found: %s "
+ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+ core->core_index, bcma_device_name(&core->id),
+ core->id.manuf, core->id.id, core->id.rev,
+ core->id.class);
+
+ list_add(&core->list, &bus->cores);
+ return 0;
+ }
+
+ return -ENODEV;
+}
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 8c96654..e31c9b4 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -190,6 +190,7 @@ struct bcma_bus {
struct bcma_device *mapped_core;
struct list_head cores;
u8 nr_cores;
+ u8 init_done:1;
struct bcma_drv_cc drv_cc;
struct bcma_drv_pci drv_pci;
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index a0f6846..c8b4cf7 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -252,6 +252,7 @@ struct bcma_drv_cc {
u32 status;
u32 capabilities;
u32 capabilities_ext;
+ u8 setup_done:1;
/* Fast Powerup Delay constant */
u16 fast_pwrup_delay;
struct bcma_chipcommon_pmu pmu;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 04/11] bcma: add SOC bus
2011-07-22 23:20 ` Hauke Mehrtens
@ 2011-07-22 23:20 ` Hauke Mehrtens
-1 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
This patch adds support for using bcma on a Broadcom SoC as the system
bus. An SoC like the bcm4716 could register this bus and use it to
searches for the bcma cores and register the devices on this bus.
BCMA_HOSTTYPE_NONE was intended for SoCs at first but BCMA_HOSTTYPE_SOC
is a better name.
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/bcma/Kconfig | 4 +
drivers/bcma/Makefile | 1 +
drivers/bcma/core.c | 2 +
drivers/bcma/driver_pci.c | 9 ++-
drivers/bcma/host_soc.c | 183 +++++++++++++++++++++++++++++++++++++++++
drivers/bcma/main.c | 9 ++-
drivers/bcma/scan.c | 42 ++++++++-
include/linux/bcma/bcma.h | 5 +-
include/linux/bcma/bcma_soc.h | 16 ++++
9 files changed, 263 insertions(+), 8 deletions(-)
create mode 100644 drivers/bcma/host_soc.c
create mode 100644 include/linux/bcma/bcma_soc.h
diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
index ae0a02e..4a062f8 100644
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -33,6 +33,10 @@ config BCMA_DRIVER_PCI_HOSTMODE
help
PCI core hostmode operation (external PCI bus).
+config BCMA_HOST_SOC
+ bool
+ depends on BCMA && MIPS
+
config BCMA_DEBUG
bool "BCMA debugging"
depends on BCMA
diff --git a/drivers/bcma/Makefile b/drivers/bcma/Makefile
index a2161cc..8dc730d 100644
--- a/drivers/bcma/Makefile
+++ b/drivers/bcma/Makefile
@@ -3,6 +3,7 @@ bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
bcma-y += driver_pci.o
bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
+bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o
obj-$(CONFIG_BCMA) += bcma.o
ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG
diff --git a/drivers/bcma/core.c b/drivers/bcma/core.c
index 4a04a49..189a97b 100644
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
@@ -110,6 +110,8 @@ EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
u32 bcma_core_dma_translation(struct bcma_device *core)
{
switch (core->bus->hosttype) {
+ case BCMA_HOSTTYPE_SOC:
+ return 0;
case BCMA_HOSTTYPE_PCI:
if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64)
return BCMA_DMA_TRANSLATION_DMA64_CMT;
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
index bdd3bc9..1902cdb 100644
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -208,7 +208,14 @@ int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
{
struct pci_dev *pdev = pc->core->bus->host_pci;
u32 coremask, tmp;
- int err;
+ int err = 0;
+
+ if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
+ /* This bcma device is not on a PCI host-bus. So the IRQs are
+ * not routed through the PCI core.
+ * So we must not enable routing through the PCI core. */
+ goto out;
+ }
err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
if (err)
diff --git a/drivers/bcma/host_soc.c b/drivers/bcma/host_soc.c
new file mode 100644
index 0000000..3c381fb
--- /dev/null
+++ b/drivers/bcma/host_soc.c
@@ -0,0 +1,183 @@
+/*
+ * Broadcom specific AMBA
+ * System on Chip (SoC) Host
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include "scan.h"
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_soc.h>
+
+static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset)
+{
+ return readb(core->io_addr + offset);
+}
+
+static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset)
+{
+ return readw(core->io_addr + offset);
+}
+
+static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset)
+{
+ return readl(core->io_addr + offset);
+}
+
+static void bcma_host_soc_write8(struct bcma_device *core, u16 offset,
+ u8 value)
+{
+ writeb(value, core->io_addr + offset);
+}
+
+static void bcma_host_soc_write16(struct bcma_device *core, u16 offset,
+ u16 value)
+{
+ writew(value, core->io_addr + offset);
+}
+
+static void bcma_host_soc_write32(struct bcma_device *core, u16 offset,
+ u32 value)
+{
+ writel(value, core->io_addr + offset);
+}
+
+#ifdef CONFIG_BCMA_BLOCKIO
+static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+{
+ void __iomem *addr = core->io_addr + offset;
+
+ switch (reg_width) {
+ case sizeof(u8): {
+ u8 *buf = buffer;
+
+ while (count) {
+ *buf = __raw_readb(addr);
+ buf++;
+ count--;
+ }
+ break;
+ }
+ case sizeof(u16): {
+ __le16 *buf = buffer;
+
+ WARN_ON(count & 1);
+ while (count) {
+ *buf = (__force __le16)__raw_readw(addr);
+ buf++;
+ count -= 2;
+ }
+ break;
+ }
+ case sizeof(u32): {
+ __le32 *buf = buffer;
+
+ WARN_ON(count & 3);
+ while (count) {
+ *buf = (__force __le32)__raw_readl(addr);
+ buf++;
+ count -= 4;
+ }
+ break;
+ }
+ default:
+ WARN_ON(1);
+ }
+}
+
+static void bcma_host_soc_block_write(struct bcma_device *core,
+ const void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+{
+ void __iomem *addr = core->io_addr + offset;
+
+ switch (reg_width) {
+ case sizeof(u8): {
+ const u8 *buf = buffer;
+
+ while (count) {
+ __raw_writeb(*buf, addr);
+ buf++;
+ count--;
+ }
+ break;
+ }
+ case sizeof(u16): {
+ const __le16 *buf = buffer;
+
+ WARN_ON(count & 1);
+ while (count) {
+ __raw_writew((__force u16)(*buf), addr);
+ buf++;
+ count -= 2;
+ }
+ break;
+ }
+ case sizeof(u32): {
+ const __le32 *buf = buffer;
+
+ WARN_ON(count & 3);
+ while (count) {
+ __raw_writel((__force u32)(*buf), addr);
+ buf++;
+ count -= 4;
+ }
+ break;
+ }
+ default:
+ WARN_ON(1);
+ }
+}
+#endif /* CONFIG_BCMA_BLOCKIO */
+
+static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset)
+{
+ return readl(core->io_wrap + offset);
+}
+
+static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset,
+ u32 value)
+{
+ writel(value, core->io_wrap + offset);
+}
+
+const struct bcma_host_ops bcma_host_soc_ops = {
+ .read8 = bcma_host_soc_read8,
+ .read16 = bcma_host_soc_read16,
+ .read32 = bcma_host_soc_read32,
+ .write8 = bcma_host_soc_write8,
+ .write16 = bcma_host_soc_write16,
+ .write32 = bcma_host_soc_write32,
+#ifdef CONFIG_BCMA_BLOCKIO
+ .block_read = bcma_host_soc_block_read,
+ .block_write = bcma_host_soc_block_write,
+#endif
+ .aread32 = bcma_host_soc_aread32,
+ .awrite32 = bcma_host_soc_awrite32,
+};
+
+int __init bcma_host_soc_register(struct bcma_soc *soc)
+{
+ struct bcma_bus *bus = &soc->bus;
+ int err;
+
+ /* iomap only first core. We have to read some register on this core
+ * to scan the bus.
+ */
+ bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1);
+ if (!bus->mmio)
+ return -ENOMEM;
+
+ /* Host specific */
+ bus->hosttype = BCMA_HOSTTYPE_SOC;
+ bus->ops = &bcma_host_soc_ops;
+
+ /* Register */
+ err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips);
+ if (err)
+ iounmap(bus->mmio);
+
+ return err;
+}
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index 360a289..2648522 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -66,6 +66,10 @@ static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
static void bcma_release_core_dev(struct device *dev)
{
struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ if (core->io_addr)
+ iounmap(core->io_addr);
+ if (core->io_wrap)
+ iounmap(core->io_wrap);
kfree(core);
}
@@ -93,7 +97,10 @@ static int bcma_register_cores(struct bcma_bus *bus)
core->dma_dev = &bus->host_pci->dev;
core->irq = bus->host_pci->irq;
break;
- case BCMA_HOSTTYPE_NONE:
+ case BCMA_HOSTTYPE_SOC:
+ core->dev.dma_mask = &core->dev.coherent_dma_mask;
+ core->dma_dev = &core->dev;
+ break;
case BCMA_HOSTTYPE_SDIO:
break;
}
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index bf9f806..0ea390f 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -337,6 +337,16 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
}
}
}
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
+ core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE);
+ if (!core->io_addr)
+ return -ENOMEM;
+ core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE);
+ if (!core->io_wrap) {
+ iounmap(core->io_addr);
+ return -ENOMEM;
+ }
+ }
return 0;
}
@@ -369,7 +379,14 @@ int bcma_bus_scan(struct bcma_bus *bus)
bcma_init_bus(bus);
erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
- eromptr = bus->mmio;
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
+ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
+ if (!eromptr)
+ return -ENOMEM;
+ } else {
+ eromptr = bus->mmio;
+ }
+
eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
bcma_scan_switch_core(bus, erombase);
@@ -404,6 +421,9 @@ int bcma_bus_scan(struct bcma_bus *bus)
list_add(&core->list, &bus->cores);
}
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC)
+ iounmap(eromptr);
+
return 0;
}
@@ -414,10 +434,18 @@ int __init bcma_bus_scan_early(struct bcma_bus *bus,
u32 erombase;
u32 __iomem *eromptr, *eromend;
- int err, core_num = 0;
+ int err = -ENODEV;
+ int core_num = 0;
erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
- eromptr = bus->mmio;
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
+ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
+ if (!eromptr)
+ return -ENOMEM;
+ } else {
+ eromptr = bus->mmio;
+ }
+
eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
bcma_scan_switch_core(bus, erombase);
@@ -447,8 +475,12 @@ int __init bcma_bus_scan_early(struct bcma_bus *bus,
core->id.class);
list_add(&core->list, &bus->cores);
- return 0;
+ err = 0;
+ break;
}
- return -ENODEV;
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC)
+ iounmap(eromptr);
+
+ return err;
}
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index e31c9b4..c70cec5 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -14,9 +14,9 @@ struct bcma_device;
struct bcma_bus;
enum bcma_hosttype {
- BCMA_HOSTTYPE_NONE,
BCMA_HOSTTYPE_PCI,
BCMA_HOSTTYPE_SDIO,
+ BCMA_HOSTTYPE_SOC,
};
struct bcma_chipinfo {
@@ -138,6 +138,9 @@ struct bcma_device {
u32 addr;
u32 wrap;
+ void __iomem *io_addr;
+ void __iomem *io_wrap;
+
void *drvdata;
struct list_head list;
};
diff --git a/include/linux/bcma/bcma_soc.h b/include/linux/bcma/bcma_soc.h
new file mode 100644
index 0000000..4203c55
--- /dev/null
+++ b/include/linux/bcma/bcma_soc.h
@@ -0,0 +1,16 @@
+#ifndef LINUX_BCMA_SOC_H_
+#define LINUX_BCMA_SOC_H_
+
+#include <linux/bcma/bcma.h>
+
+struct bcma_soc {
+ struct bcma_bus bus;
+ struct bcma_device core_cc;
+ struct bcma_device core_mips;
+};
+
+int __init bcma_host_soc_register(struct bcma_soc *soc);
+
+int bcma_bus_register(struct bcma_bus *bus);
+
+#endif /* LINUX_BCMA_SOC_H_ */
--
1.7.4.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 04/11] bcma: add SOC bus
@ 2011-07-22 23:20 ` Hauke Mehrtens
0 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
This patch adds support for using bcma on a Broadcom SoC as the system
bus. An SoC like the bcm4716 could register this bus and use it to
searches for the bcma cores and register the devices on this bus.
BCMA_HOSTTYPE_NONE was intended for SoCs at first but BCMA_HOSTTYPE_SOC
is a better name.
Acked-by: Rafa? Mi?ecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/bcma/Kconfig | 4 +
drivers/bcma/Makefile | 1 +
drivers/bcma/core.c | 2 +
drivers/bcma/driver_pci.c | 9 ++-
drivers/bcma/host_soc.c | 183 +++++++++++++++++++++++++++++++++++++++++
drivers/bcma/main.c | 9 ++-
drivers/bcma/scan.c | 42 ++++++++-
include/linux/bcma/bcma.h | 5 +-
include/linux/bcma/bcma_soc.h | 16 ++++
9 files changed, 263 insertions(+), 8 deletions(-)
create mode 100644 drivers/bcma/host_soc.c
create mode 100644 include/linux/bcma/bcma_soc.h
diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
index ae0a02e..4a062f8 100644
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -33,6 +33,10 @@ config BCMA_DRIVER_PCI_HOSTMODE
help
PCI core hostmode operation (external PCI bus).
+config BCMA_HOST_SOC
+ bool
+ depends on BCMA && MIPS
+
config BCMA_DEBUG
bool "BCMA debugging"
depends on BCMA
diff --git a/drivers/bcma/Makefile b/drivers/bcma/Makefile
index a2161cc..8dc730d 100644
--- a/drivers/bcma/Makefile
+++ b/drivers/bcma/Makefile
@@ -3,6 +3,7 @@ bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
bcma-y += driver_pci.o
bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
+bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o
obj-$(CONFIG_BCMA) += bcma.o
ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG
diff --git a/drivers/bcma/core.c b/drivers/bcma/core.c
index 4a04a49..189a97b 100644
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
@@ -110,6 +110,8 @@ EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
u32 bcma_core_dma_translation(struct bcma_device *core)
{
switch (core->bus->hosttype) {
+ case BCMA_HOSTTYPE_SOC:
+ return 0;
case BCMA_HOSTTYPE_PCI:
if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64)
return BCMA_DMA_TRANSLATION_DMA64_CMT;
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
index bdd3bc9..1902cdb 100644
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -208,7 +208,14 @@ int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
{
struct pci_dev *pdev = pc->core->bus->host_pci;
u32 coremask, tmp;
- int err;
+ int err = 0;
+
+ if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
+ /* This bcma device is not on a PCI host-bus. So the IRQs are
+ * not routed through the PCI core.
+ * So we must not enable routing through the PCI core. */
+ goto out;
+ }
err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
if (err)
diff --git a/drivers/bcma/host_soc.c b/drivers/bcma/host_soc.c
new file mode 100644
index 0000000..3c381fb
--- /dev/null
+++ b/drivers/bcma/host_soc.c
@@ -0,0 +1,183 @@
+/*
+ * Broadcom specific AMBA
+ * System on Chip (SoC) Host
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include "scan.h"
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_soc.h>
+
+static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset)
+{
+ return readb(core->io_addr + offset);
+}
+
+static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset)
+{
+ return readw(core->io_addr + offset);
+}
+
+static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset)
+{
+ return readl(core->io_addr + offset);
+}
+
+static void bcma_host_soc_write8(struct bcma_device *core, u16 offset,
+ u8 value)
+{
+ writeb(value, core->io_addr + offset);
+}
+
+static void bcma_host_soc_write16(struct bcma_device *core, u16 offset,
+ u16 value)
+{
+ writew(value, core->io_addr + offset);
+}
+
+static void bcma_host_soc_write32(struct bcma_device *core, u16 offset,
+ u32 value)
+{
+ writel(value, core->io_addr + offset);
+}
+
+#ifdef CONFIG_BCMA_BLOCKIO
+static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+{
+ void __iomem *addr = core->io_addr + offset;
+
+ switch (reg_width) {
+ case sizeof(u8): {
+ u8 *buf = buffer;
+
+ while (count) {
+ *buf = __raw_readb(addr);
+ buf++;
+ count--;
+ }
+ break;
+ }
+ case sizeof(u16): {
+ __le16 *buf = buffer;
+
+ WARN_ON(count & 1);
+ while (count) {
+ *buf = (__force __le16)__raw_readw(addr);
+ buf++;
+ count -= 2;
+ }
+ break;
+ }
+ case sizeof(u32): {
+ __le32 *buf = buffer;
+
+ WARN_ON(count & 3);
+ while (count) {
+ *buf = (__force __le32)__raw_readl(addr);
+ buf++;
+ count -= 4;
+ }
+ break;
+ }
+ default:
+ WARN_ON(1);
+ }
+}
+
+static void bcma_host_soc_block_write(struct bcma_device *core,
+ const void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+{
+ void __iomem *addr = core->io_addr + offset;
+
+ switch (reg_width) {
+ case sizeof(u8): {
+ const u8 *buf = buffer;
+
+ while (count) {
+ __raw_writeb(*buf, addr);
+ buf++;
+ count--;
+ }
+ break;
+ }
+ case sizeof(u16): {
+ const __le16 *buf = buffer;
+
+ WARN_ON(count & 1);
+ while (count) {
+ __raw_writew((__force u16)(*buf), addr);
+ buf++;
+ count -= 2;
+ }
+ break;
+ }
+ case sizeof(u32): {
+ const __le32 *buf = buffer;
+
+ WARN_ON(count & 3);
+ while (count) {
+ __raw_writel((__force u32)(*buf), addr);
+ buf++;
+ count -= 4;
+ }
+ break;
+ }
+ default:
+ WARN_ON(1);
+ }
+}
+#endif /* CONFIG_BCMA_BLOCKIO */
+
+static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset)
+{
+ return readl(core->io_wrap + offset);
+}
+
+static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset,
+ u32 value)
+{
+ writel(value, core->io_wrap + offset);
+}
+
+const struct bcma_host_ops bcma_host_soc_ops = {
+ .read8 = bcma_host_soc_read8,
+ .read16 = bcma_host_soc_read16,
+ .read32 = bcma_host_soc_read32,
+ .write8 = bcma_host_soc_write8,
+ .write16 = bcma_host_soc_write16,
+ .write32 = bcma_host_soc_write32,
+#ifdef CONFIG_BCMA_BLOCKIO
+ .block_read = bcma_host_soc_block_read,
+ .block_write = bcma_host_soc_block_write,
+#endif
+ .aread32 = bcma_host_soc_aread32,
+ .awrite32 = bcma_host_soc_awrite32,
+};
+
+int __init bcma_host_soc_register(struct bcma_soc *soc)
+{
+ struct bcma_bus *bus = &soc->bus;
+ int err;
+
+ /* iomap only first core. We have to read some register on this core
+ * to scan the bus.
+ */
+ bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1);
+ if (!bus->mmio)
+ return -ENOMEM;
+
+ /* Host specific */
+ bus->hosttype = BCMA_HOSTTYPE_SOC;
+ bus->ops = &bcma_host_soc_ops;
+
+ /* Register */
+ err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips);
+ if (err)
+ iounmap(bus->mmio);
+
+ return err;
+}
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index 360a289..2648522 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -66,6 +66,10 @@ static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
static void bcma_release_core_dev(struct device *dev)
{
struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ if (core->io_addr)
+ iounmap(core->io_addr);
+ if (core->io_wrap)
+ iounmap(core->io_wrap);
kfree(core);
}
@@ -93,7 +97,10 @@ static int bcma_register_cores(struct bcma_bus *bus)
core->dma_dev = &bus->host_pci->dev;
core->irq = bus->host_pci->irq;
break;
- case BCMA_HOSTTYPE_NONE:
+ case BCMA_HOSTTYPE_SOC:
+ core->dev.dma_mask = &core->dev.coherent_dma_mask;
+ core->dma_dev = &core->dev;
+ break;
case BCMA_HOSTTYPE_SDIO:
break;
}
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index bf9f806..0ea390f 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -337,6 +337,16 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
}
}
}
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
+ core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE);
+ if (!core->io_addr)
+ return -ENOMEM;
+ core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE);
+ if (!core->io_wrap) {
+ iounmap(core->io_addr);
+ return -ENOMEM;
+ }
+ }
return 0;
}
@@ -369,7 +379,14 @@ int bcma_bus_scan(struct bcma_bus *bus)
bcma_init_bus(bus);
erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
- eromptr = bus->mmio;
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
+ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
+ if (!eromptr)
+ return -ENOMEM;
+ } else {
+ eromptr = bus->mmio;
+ }
+
eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
bcma_scan_switch_core(bus, erombase);
@@ -404,6 +421,9 @@ int bcma_bus_scan(struct bcma_bus *bus)
list_add(&core->list, &bus->cores);
}
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC)
+ iounmap(eromptr);
+
return 0;
}
@@ -414,10 +434,18 @@ int __init bcma_bus_scan_early(struct bcma_bus *bus,
u32 erombase;
u32 __iomem *eromptr, *eromend;
- int err, core_num = 0;
+ int err = -ENODEV;
+ int core_num = 0;
erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
- eromptr = bus->mmio;
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
+ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
+ if (!eromptr)
+ return -ENOMEM;
+ } else {
+ eromptr = bus->mmio;
+ }
+
eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
bcma_scan_switch_core(bus, erombase);
@@ -447,8 +475,12 @@ int __init bcma_bus_scan_early(struct bcma_bus *bus,
core->id.class);
list_add(&core->list, &bus->cores);
- return 0;
+ err = 0;
+ break;
}
- return -ENODEV;
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC)
+ iounmap(eromptr);
+
+ return err;
}
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index e31c9b4..c70cec5 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -14,9 +14,9 @@ struct bcma_device;
struct bcma_bus;
enum bcma_hosttype {
- BCMA_HOSTTYPE_NONE,
BCMA_HOSTTYPE_PCI,
BCMA_HOSTTYPE_SDIO,
+ BCMA_HOSTTYPE_SOC,
};
struct bcma_chipinfo {
@@ -138,6 +138,9 @@ struct bcma_device {
u32 addr;
u32 wrap;
+ void __iomem *io_addr;
+ void __iomem *io_wrap;
+
void *drvdata;
struct list_head list;
};
diff --git a/include/linux/bcma/bcma_soc.h b/include/linux/bcma/bcma_soc.h
new file mode 100644
index 0000000..4203c55
--- /dev/null
+++ b/include/linux/bcma/bcma_soc.h
@@ -0,0 +1,16 @@
+#ifndef LINUX_BCMA_SOC_H_
+#define LINUX_BCMA_SOC_H_
+
+#include <linux/bcma/bcma.h>
+
+struct bcma_soc {
+ struct bcma_bus bus;
+ struct bcma_device core_cc;
+ struct bcma_device core_mips;
+};
+
+int __init bcma_host_soc_register(struct bcma_soc *soc);
+
+int bcma_bus_register(struct bcma_bus *bus);
+
+#endif /* LINUX_BCMA_SOC_H_ */
--
1.7.4.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 05/11] bcma: add mips driver
2011-07-22 23:20 ` Hauke Mehrtens
` (4 preceding siblings ...)
(?)
@ 2011-07-22 23:20 ` Hauke Mehrtens
-1 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
This adds a mips driver to bcma. This is only found on embedded
devices. For now the driver just initializes the irqs used on this
system.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/bcma/Kconfig | 9 +
drivers/bcma/Makefile | 1 +
drivers/bcma/driver_mips.c | 243 +++++++++++++++++++++++++++
drivers/bcma/main.c | 15 ++
include/linux/bcma/bcma.h | 3 +
include/linux/bcma/bcma_driver_chipcommon.h | 13 ++
include/linux/bcma/bcma_driver_mips.h | 49 ++++++
7 files changed, 333 insertions(+), 0 deletions(-)
create mode 100644 drivers/bcma/driver_mips.c
create mode 100644 include/linux/bcma/bcma_driver_mips.h
diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
index 4a062f8..c1172da 100644
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -35,7 +35,16 @@ config BCMA_DRIVER_PCI_HOSTMODE
config BCMA_HOST_SOC
bool
+ depends on BCMA_DRIVER_MIPS
+
+config BCMA_DRIVER_MIPS
+ bool "BCMA Broadcom MIPS core driver"
depends on BCMA && MIPS
+ help
+ Driver for the Broadcom MIPS core attached to Broadcom specific
+ Advanced Microcontroller Bus.
+
+ If unsure, say N
config BCMA_DEBUG
bool "BCMA debugging"
diff --git a/drivers/bcma/Makefile b/drivers/bcma/Makefile
index 8dc730d..82de24e 100644
--- a/drivers/bcma/Makefile
+++ b/drivers/bcma/Makefile
@@ -2,6 +2,7 @@ bcma-y += main.o scan.o core.o sprom.o
bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
bcma-y += driver_pci.o
bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
+bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o
obj-$(CONFIG_BCMA) += bcma.o
diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c
new file mode 100644
index 0000000..4b60c9f9
--- /dev/null
+++ b/drivers/bcma/driver_mips.c
@@ -0,0 +1,243 @@
+/*
+ * Broadcom specific AMBA
+ * Broadcom MIPS32 74K core driver
+ *
+ * Copyright 2009, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2010, Bernhard Loos <bernhardloos@googlemail.com>
+ * Copyright 2011, Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+
+#include <linux/bcma/bcma.h>
+
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/time.h>
+
+/* The 47162a0 hangs when reading MIPS DMP registers registers */
+static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
+{
+ return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 &&
+ dev->id.id == BCMA_CORE_MIPS_74K;
+}
+
+/* The 5357b0 hangs when reading USB20H DMP registers */
+static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev)
+{
+ return (dev->bus->chipinfo.id == 0x5357 ||
+ dev->bus->chipinfo.id == 0x4749) &&
+ dev->bus->chipinfo.pkg == 11 &&
+ dev->id.id == BCMA_CORE_USB20_HOST;
+}
+
+static inline u32 mips_read32(struct bcma_drv_mips *mcore,
+ u16 offset)
+{
+ return bcma_read32(mcore->core, offset);
+}
+
+static inline void mips_write32(struct bcma_drv_mips *mcore,
+ u16 offset,
+ u32 value)
+{
+ bcma_write32(mcore->core, offset, value);
+}
+
+static const u32 ipsflag_irq_mask[] = {
+ 0,
+ BCMA_MIPS_IPSFLAG_IRQ1,
+ BCMA_MIPS_IPSFLAG_IRQ2,
+ BCMA_MIPS_IPSFLAG_IRQ3,
+ BCMA_MIPS_IPSFLAG_IRQ4,
+};
+
+static const u32 ipsflag_irq_shift[] = {
+ 0,
+ BCMA_MIPS_IPSFLAG_IRQ1_SHIFT,
+ BCMA_MIPS_IPSFLAG_IRQ2_SHIFT,
+ BCMA_MIPS_IPSFLAG_IRQ3_SHIFT,
+ BCMA_MIPS_IPSFLAG_IRQ4_SHIFT,
+};
+
+static u32 bcma_core_mips_irqflag(struct bcma_device *dev)
+{
+ u32 flag;
+
+ if (bcma_core_mips_bcm47162a0_quirk(dev))
+ return dev->core_index;
+ if (bcma_core_mips_bcm5357b0_quirk(dev))
+ return dev->core_index;
+ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
+
+ return flag & 0x1F;
+}
+
+/* Get the MIPS IRQ assignment for a specified device.
+ * If unassigned, 0 is returned.
+ */
+unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+{
+ struct bcma_device *mdev = dev->bus->drv_mips.core;
+ u32 irqflag;
+ unsigned int irq;
+
+ irqflag = bcma_core_mips_irqflag(dev);
+
+ for (irq = 1; irq <= 4; irq++)
+ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) &
+ (1 << irqflag))
+ return irq;
+
+ return 0;
+}
+EXPORT_SYMBOL(bcma_core_mips_irq);
+
+static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+{
+ unsigned int oldirq = bcma_core_mips_irq(dev);
+ struct bcma_bus *bus = dev->bus;
+ struct bcma_device *mdev = bus->drv_mips.core;
+ u32 irqflag;
+
+ irqflag = bcma_core_mips_irqflag(dev);
+ BUG_ON(oldirq == 6);
+
+ dev->irq = irq + 2;
+
+ /* clear the old irq */
+ if (oldirq == 0)
+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
+ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
+ ~(1 << irqflag));
+ else
+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
+
+ /* assign the new one */
+ if (irq == 0) {
+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
+ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
+ (1 << irqflag));
+ } else {
+ u32 oldirqflag = bcma_read32(mdev,
+ BCMA_MIPS_MIPS74K_INTMASK(irq));
+ if (oldirqflag) {
+ struct bcma_device *core;
+
+ /* backplane irq line is in use, find out who uses
+ * it and set user to irq 0
+ */
+ list_for_each_entry_reverse(core, &bus->cores, list) {
+ if ((1 << bcma_core_mips_irqflag(core)) ==
+ oldirqflag) {
+ bcma_core_mips_set_irq(core, 0);
+ break;
+ }
+ }
+ }
+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq),
+ 1 << irqflag);
+ }
+
+ pr_info("set_irq: core 0x%04x, irq %d => %d\n",
+ dev->id.id, oldirq + 2, irq + 2);
+}
+
+static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq)
+{
+ int i;
+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+ printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
+ for (i = 0; i <= 6; i++)
+ printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
+ printk("\n");
+}
+
+static void bcma_core_mips_dump_irq(struct bcma_bus *bus)
+{
+ struct bcma_device *core;
+
+ list_for_each_entry_reverse(core, &bus->cores, list) {
+ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
+ }
+}
+
+static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
+{
+ struct bcma_bus *bus = mcore->core->bus;
+
+ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
+ case BCMA_CC_FLASHT_STSER:
+ case BCMA_CC_FLASHT_ATSER:
+ pr_err("Serial flash not supported.\n");
+ break;
+ case BCMA_CC_FLASHT_PARA:
+ pr_info("found parallel flash.\n");
+ bus->drv_cc.pflash.window = 0x1c000000;
+ bus->drv_cc.pflash.window_size = 0x02000000;
+
+ if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) &
+ BCMA_CC_FLASH_CFG_DS) == 0)
+ bus->drv_cc.pflash.buswidth = 1;
+ else
+ bus->drv_cc.pflash.buswidth = 2;
+ break;
+ default:
+ pr_err("flash not supported.\n");
+ }
+}
+
+void bcma_core_mips_init(struct bcma_drv_mips *mcore)
+{
+ struct bcma_bus *bus;
+ struct bcma_device *core;
+ bus = mcore->core->bus;
+
+ pr_info("Initializing MIPS core...\n");
+
+ if (!mcore->setup_done)
+ mcore->assigned_irqs = 1;
+
+ /* Assign IRQs to all cores on the bus */
+ list_for_each_entry_reverse(core, &bus->cores, list) {
+ int mips_irq;
+ if (core->irq)
+ continue;
+
+ mips_irq = bcma_core_mips_irq(core);
+ if (mips_irq > 4)
+ core->irq = 0;
+ else
+ core->irq = mips_irq + 2;
+ if (core->irq > 5)
+ continue;
+ switch (core->id.id) {
+ case BCMA_CORE_PCI:
+ case BCMA_CORE_PCIE:
+ case BCMA_CORE_ETHERNET:
+ case BCMA_CORE_ETHERNET_GBIT:
+ case BCMA_CORE_MAC_GBIT:
+ case BCMA_CORE_80211:
+ case BCMA_CORE_USB20_HOST:
+ /* These devices get their own IRQ line if available,
+ * the rest goes on IRQ0
+ */
+ if (mcore->assigned_irqs <= 4)
+ bcma_core_mips_set_irq(core,
+ mcore->assigned_irqs++);
+ break;
+ }
+ }
+ pr_info("IRQ reconfiguration done\n");
+ bcma_core_mips_dump_irq(bus);
+
+ if (mcore->setup_done)
+ return;
+
+ bcma_core_mips_flash_detect(mcore);
+ mcore->setup_done = true;
+}
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index 2648522..7072216 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -84,6 +84,7 @@ static int bcma_register_cores(struct bcma_bus *bus)
case BCMA_CORE_CHIPCOMMON:
case BCMA_CORE_PCI:
case BCMA_CORE_PCIE:
+ case BCMA_CORE_MIPS_74K:
continue;
}
@@ -147,6 +148,13 @@ int bcma_bus_register(struct bcma_bus *bus)
bcma_core_chipcommon_init(&bus->drv_cc);
}
+ /* Init MIPS core */
+ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
+ if (core) {
+ bus->drv_mips.core = core;
+ bcma_core_mips_init(&bus->drv_mips);
+ }
+
/* Init PCIE core */
core = bcma_find_core(bus, BCMA_CORE_PCIE);
if (core) {
@@ -217,6 +225,13 @@ int __init bcma_bus_early_register(struct bcma_bus *bus,
bcma_core_chipcommon_init(&bus->drv_cc);
}
+ /* Init MIPS core */
+ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
+ if (core) {
+ bus->drv_mips.core = core;
+ bcma_core_mips_init(&bus->drv_mips);
+ }
+
pr_info("Early bus registered\n");
return 0;
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index c70cec5..5dbd705 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -6,6 +6,7 @@
#include <linux/bcma/bcma_driver_chipcommon.h>
#include <linux/bcma/bcma_driver_pci.h>
+#include <linux/bcma/bcma_driver_mips.h>
#include <linux/ssb/ssb.h> /* SPROM sharing */
#include "bcma_regs.h"
@@ -130,6 +131,7 @@ struct bcma_device {
struct device dev;
struct device *dma_dev;
+
unsigned int irq;
bool dev_registered;
@@ -197,6 +199,7 @@ struct bcma_bus {
struct bcma_drv_cc drv_cc;
struct bcma_drv_pci drv_pci;
+ struct bcma_drv_mips drv_mips;
/* We decided to share SPROM struct with SSB as long as we do not need
* any hacks for BCMA. This simplifies drivers code. */
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index c8b4cf7..03cde8d 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -24,6 +24,7 @@
#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */
#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */
#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
+#define BCMA_CC_FLASHT_NFLASH 0x00000200
#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */
#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */
#define BCMA_PLLTYPE_NONE 0x00000000
@@ -178,6 +179,7 @@
#define BCMA_CC_PROG_CFG 0x0120
#define BCMA_CC_PROG_WAITCNT 0x0124
#define BCMA_CC_FLASH_CFG 0x0128
+#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */
#define BCMA_CC_FLASH_WAITCNT 0x012C
/* 0x1E0 is defined as shared BCMA_CLKCTLST */
#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
@@ -247,6 +249,14 @@ struct bcma_chipcommon_pmu {
u32 crystalfreq; /* The active crystal frequency (in kHz) */
};
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+struct bcma_pflash {
+ u8 buswidth;
+ u32 window;
+ u32 window_size;
+};
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
+
struct bcma_drv_cc {
struct bcma_device *core;
u32 status;
@@ -256,6 +266,9 @@ struct bcma_drv_cc {
/* Fast Powerup Delay constant */
u16 fast_pwrup_delay;
struct bcma_chipcommon_pmu pmu;
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+ struct bcma_pflash pflash;
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
};
/* Register access */
diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h
new file mode 100644
index 0000000..82b3bfd
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_mips.h
@@ -0,0 +1,49 @@
+#ifndef LINUX_BCMA_DRIVER_MIPS_H_
+#define LINUX_BCMA_DRIVER_MIPS_H_
+
+#define BCMA_MIPS_IPSFLAG 0x0F08
+/* which sbflags get routed to mips interrupt 1 */
+#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F
+#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0
+/* which sbflags get routed to mips interrupt 2 */
+#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00
+#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8
+/* which sbflags get routed to mips interrupt 3 */
+#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000
+#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16
+/* which sbflags get routed to mips interrupt 4 */
+#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000
+#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24
+
+/* MIPS 74K core registers */
+#define BCMA_MIPS_MIPS74K_CORECTL 0x0000
+#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004
+#define BCMA_MIPS_MIPS74K_BIST 0x000C
+#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014
+#define BCMA_MIPS_MIPS74K_INTMASK(int) \
+ ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0)
+#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C
+#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040
+#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044
+#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048
+#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0
+
+#define BCMA_MIPS_OOBSELOUTA30 0x100
+
+struct bcma_device;
+
+struct bcma_drv_mips {
+ struct bcma_device *core;
+ u8 setup_done:1;
+ unsigned int assigned_irqs;
+};
+
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+#else
+static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+#endif
+
+extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+
+#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
--
1.7.4.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 06/11] bcma: add serial console support
2011-07-22 23:20 ` Hauke Mehrtens
` (5 preceding siblings ...)
(?)
@ 2011-07-22 23:20 ` Hauke Mehrtens
2011-07-29 21:04 ` Rafał Miłecki
-1 siblings, 1 reply; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
This adds support for serial console to bcma, when operating on an SoC.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/bcma/bcma_private.h | 8 ++++
drivers/bcma/driver_chipcommon.c | 48 +++++++++++++++++++++++++++
drivers/bcma/driver_chipcommon_pmu.c | 26 ++++++++++++++
drivers/bcma/driver_mips.c | 1 +
include/linux/bcma/bcma_driver_chipcommon.h | 14 ++++++++
5 files changed, 97 insertions(+), 0 deletions(-)
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
index b97633d..22d3052 100644
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -29,6 +29,14 @@ void bcma_init_bus(struct bcma_bus *bus);
/* sprom.c */
int bcma_sprom_get(struct bcma_bus *bus);
+/* driver_chipcommon.c */
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
+
+/* driver_chipcommon_pmu.c */
+u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
+
#ifdef CONFIG_BCMA_HOST_PCI
/* host_pci.c */
extern int __init bcma_host_pci_init(void);
diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
index 75f1ad7..12b42ea 100644
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -106,3 +106,51 @@ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
}
+
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
+{
+ unsigned int irq;
+ u32 baud_base;
+ u32 i;
+ unsigned int ccrev = cc->core->id.rev;
+ struct bcma_serial_port *ports = cc->serial_ports;
+
+ if (ccrev >= 11 && ccrev != 15) {
+ /* Fixed ALP clock */
+ baud_base = bcma_pmu_alp_clock(cc);
+ if (ccrev >= 21) {
+ /* Turn off UART clock before switching clocksource. */
+ bcma_cc_write32(cc, BCMA_CC_CORECTL,
+ bcma_cc_read32(cc, BCMA_CC_CORECTL)
+ & ~BCMA_CC_CORECTL_UARTCLKEN);
+ }
+ /* Set the override bit so we don't divide it */
+ bcma_cc_write32(cc, BCMA_CC_CORECTL,
+ bcma_cc_read32(cc, BCMA_CC_CORECTL)
+ | BCMA_CC_CORECTL_UARTCLK0);
+ if (ccrev >= 21) {
+ /* Re-enable the UART clock. */
+ bcma_cc_write32(cc, BCMA_CC_CORECTL,
+ bcma_cc_read32(cc, BCMA_CC_CORECTL)
+ | BCMA_CC_CORECTL_UARTCLKEN);
+ }
+ } else {
+ pr_err("serial not supported on this device ccrev: 0x%x\n",
+ ccrev);
+ return;
+ }
+
+ irq = bcma_core_mips_irq(cc->core);
+
+ /* Determine the registers of the UARTs */
+ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
+ for (i = 0; i < cc->nr_serial_ports; i++) {
+ ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA +
+ (i * 256);
+ ports[i].irq = irq;
+ ports[i].baud_base = baud_base;
+ ports[i].reg_shift = 0;
+ }
+}
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
index dd5846b..59d2b26 100644
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -136,3 +136,29 @@ void bcma_pmu_init(struct bcma_drv_cc *cc)
bcma_pmu_swreg_init(cc);
bcma_pmu_workarounds(cc);
}
+
+u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc)
+{
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
+ case 0x4716:
+ case 0x4748:
+ case 47162:
+ case 0x4313:
+ case 0x5357:
+ case 0x4749:
+ case 53572:
+ /* always 20Mhz */
+ return 20000 * 1000;
+ case 0x5356:
+ case 0x5300:
+ /* always 25Mhz */
+ return 25000 * 1000;
+ default:
+ pr_warn("No ALP clock specified for %04X device, "
+ "pmu rev. %d, using default %d Hz\n",
+ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
+ }
+ return BCMA_CC_PMU_ALP_CLOCK;
+}
diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c
index 4b60c9f9..b17233c 100644
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
@@ -238,6 +238,7 @@ void bcma_core_mips_init(struct bcma_drv_mips *mcore)
if (mcore->setup_done)
return;
+ bcma_chipco_serial_init(&bus->drv_cc);
bcma_core_mips_flash_detect(mcore);
mcore->setup_done = true;
}
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index 03cde8d..b9a930e 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -241,6 +241,9 @@
#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */
+/* ALP clock on pre-PMU chips */
+#define BCMA_CC_PMU_ALP_CLOCK 20000000
+
/* Data for the PMU, if available.
* Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
*/
@@ -255,6 +258,14 @@ struct bcma_pflash {
u32 window;
u32 window_size;
};
+
+struct bcma_serial_port {
+ void *regs;
+ unsigned long clockspeed;
+ unsigned int irq;
+ unsigned int baud_base;
+ unsigned int reg_shift;
+};
#endif /* CONFIG_BCMA_DRIVER_MIPS */
struct bcma_drv_cc {
@@ -268,6 +279,9 @@ struct bcma_drv_cc {
struct bcma_chipcommon_pmu pmu;
#ifdef CONFIG_BCMA_DRIVER_MIPS
struct bcma_pflash pflash;
+
+ int nr_serial_ports;
+ struct bcma_serial_port serial_ports[4];
#endif /* CONFIG_BCMA_DRIVER_MIPS */
};
--
1.7.4.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 07/11] bcma: get CPU clock
2011-07-22 23:20 ` Hauke Mehrtens
` (6 preceding siblings ...)
(?)
@ 2011-07-22 23:20 ` Hauke Mehrtens
-1 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
Add method to return the clock of the CPU. This is needed by the arch
code to calculate the mips_hpt_frequency.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/bcma/bcma_private.h | 1 +
drivers/bcma/driver_chipcommon_pmu.c | 107 +++++++++++++++++++++++++++
drivers/bcma/driver_mips.c | 12 +++
include/linux/bcma/bcma_driver_chipcommon.h | 39 ++++++++++
include/linux/bcma/bcma_driver_mips.h | 2 +
5 files changed, 161 insertions(+), 0 deletions(-)
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
index 22d3052..30a3085 100644
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -36,6 +36,7 @@ void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
/* driver_chipcommon_pmu.c */
u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
+u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc);
#ifdef CONFIG_BCMA_HOST_PCI
/* host_pci.c */
diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
index 59d2b26..ecac255 100644
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -11,6 +11,13 @@
#include "bcma_private.h"
#include <linux/bcma/bcma.h>
+static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
+{
+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
+ return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
+}
+
static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
u32 offset, u32 mask, u32 set)
{
@@ -162,3 +169,103 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc)
}
return BCMA_CC_PMU_ALP_CLOCK;
}
+
+/* Find the output of the "m" pll divider given pll controls that start with
+ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
+ */
+static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
+{
+ u32 tmp, div, ndiv, p1, p2, fc;
+ struct bcma_bus *bus = cc->core->bus;
+
+ BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0));
+
+ BUG_ON(!m || m > 4);
+
+ if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) {
+ /* Detect failure in clock setting */
+ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+ if (tmp & 0x40000)
+ return 133 * 1000000;
+ }
+
+ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF);
+ p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT;
+ p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT;
+
+ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF);
+ div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) &
+ BCMA_CC_PPL_MDIV_MASK;
+
+ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF);
+ ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
+
+ /* Do calculation in Mhz */
+ fc = bcma_pmu_alp_clock(cc) / 1000000;
+ fc = (p1 * ndiv * fc) / p2;
+
+ /* Return clock in Hertz */
+ return (fc / div) * 1000000;
+}
+
+/* query bus clock frequency for PMU-enabled chipcommon */
+u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
+{
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
+ case 0x4716:
+ case 0x4748:
+ case 47162:
+ return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
+ BCMA_CC_PMU5_MAINPLL_SSB);
+ case 0x5356:
+ return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
+ BCMA_CC_PMU5_MAINPLL_SSB);
+ case 0x5357:
+ case 0x4749:
+ return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
+ BCMA_CC_PMU5_MAINPLL_SSB);
+ case 0x5300:
+ return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0,
+ BCMA_CC_PMU5_MAINPLL_SSB);
+ case 53572:
+ return 75000000;
+ default:
+ pr_warn("No backplane clock specified for %04X device, "
+ "pmu rev. %d, using default %d Hz\n",
+ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
+ }
+ return BCMA_CC_PMU_HT_CLOCK;
+}
+
+/* query cpu clock frequency for PMU-enabled chipcommon */
+u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
+{
+ struct bcma_bus *bus = cc->core->bus;
+
+ if (bus->chipinfo.id == 53572)
+ return 300000000;
+
+ if (cc->pmu.rev >= 5) {
+ u32 pll;
+ switch (bus->chipinfo.id) {
+ case 0x5356:
+ pll = BCMA_CC_PMU5356_MAINPLL_PLL0;
+ break;
+ case 0x5357:
+ case 0x4749:
+ pll = BCMA_CC_PMU5357_MAINPLL_PLL0;
+ break;
+ default:
+ pll = BCMA_CC_PMU4716_MAINPLL_PLL0;
+ break;
+ }
+
+ /* TODO: if (bus->chipinfo.id == 0x5300)
+ return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */
+ return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
+ }
+
+ return bcma_pmu_get_clockcontrol(cc);
+}
diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c
index b17233c..c3e9dff 100644
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
@@ -166,6 +166,18 @@ static void bcma_core_mips_dump_irq(struct bcma_bus *bus)
}
}
+u32 bcma_cpu_clock(struct bcma_drv_mips *mcore)
+{
+ struct bcma_bus *bus = mcore->core->bus;
+
+ if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
+ return bcma_pmu_get_clockcpu(&bus->drv_cc);
+
+ pr_err("No PMU available, need this to get the cpu clock\n");
+ return 0;
+}
+EXPORT_SYMBOL(bcma_cpu_clock);
+
static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
{
struct bcma_bus *bus = mcore->core->bus;
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index b9a930e..6083725 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -241,8 +241,47 @@
#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */
+/* Divider allocation in 4716/47162/5356 */
+#define BCMA_CC_PMU5_MAINPLL_CPU 1
+#define BCMA_CC_PMU5_MAINPLL_MEM 2
+#define BCMA_CC_PMU5_MAINPLL_SSB 3
+
+/* PLL usage in 4716/47162 */
+#define BCMA_CC_PMU4716_MAINPLL_PLL0 12
+
+/* PLL usage in 5356/5357 */
+#define BCMA_CC_PMU5356_MAINPLL_PLL0 0
+#define BCMA_CC_PMU5357_MAINPLL_PLL0 0
+
+/* 4706 PMU */
+#define BCMA_CC_PMU4706_MAINPLL_PLL0 0
+
/* ALP clock on pre-PMU chips */
#define BCMA_CC_PMU_ALP_CLOCK 20000000
+/* HT clock for systems with PMU-enabled chipcommon */
+#define BCMA_CC_PMU_HT_CLOCK 80000000
+
+/* PMU rev 5 (& 6) */
+#define BCMA_CC_PPL_P1P2_OFF 0
+#define BCMA_CC_PPL_P1_MASK 0x0f000000
+#define BCMA_CC_PPL_P1_SHIFT 24
+#define BCMA_CC_PPL_P2_MASK 0x00f00000
+#define BCMA_CC_PPL_P2_SHIFT 20
+#define BCMA_CC_PPL_M14_OFF 1
+#define BCMA_CC_PPL_MDIV_MASK 0x000000ff
+#define BCMA_CC_PPL_MDIV_WIDTH 8
+#define BCMA_CC_PPL_NM5_OFF 2
+#define BCMA_CC_PPL_NDIV_MASK 0xfff00000
+#define BCMA_CC_PPL_NDIV_SHIFT 20
+#define BCMA_CC_PPL_FMAB_OFF 3
+#define BCMA_CC_PPL_MRAT_MASK 0xf0000000
+#define BCMA_CC_PPL_MRAT_SHIFT 28
+#define BCMA_CC_PPL_ABRAT_MASK 0x08000000
+#define BCMA_CC_PPL_ABRAT_SHIFT 27
+#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff
+#define BCMA_CC_PPL_PLLCTL_OFF 4
+#define BCMA_CC_PPL_PCHI_OFF 5
+#define BCMA_CC_PPL_PCHI_MASK 0x0000003f
/* Data for the PMU, if available.
* Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h
index 82b3bfd..c004364 100644
--- a/include/linux/bcma/bcma_driver_mips.h
+++ b/include/linux/bcma/bcma_driver_mips.h
@@ -44,6 +44,8 @@ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
#endif
+extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
+
extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
--
1.7.4.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 08/11] bcm47xx: prepare to support different buses
2011-07-22 23:20 ` Hauke Mehrtens
` (7 preceding siblings ...)
(?)
@ 2011-07-22 23:20 ` Hauke Mehrtens
-1 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
Prepare bcm47xx to support different System buses. Before adding
support for bcma it should be possible to build bcm47xx without the
need of ssb. With this patch bcm47xx does not directly contain a
ssb_bus, but a union contain all the supported system buses. As a SoC
just uses one system bus a union is a good choice.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/bcm47xx/gpio.c | 56 ++++++++++++++++----------
arch/mips/bcm47xx/nvram.c | 15 +++++--
arch/mips/bcm47xx/serial.c | 13 +++++-
arch/mips/bcm47xx/setup.c | 33 ++++++++++++---
arch/mips/bcm47xx/time.c | 9 +++-
arch/mips/bcm47xx/wgt634u.c | 14 ++++--
arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 14 ++++++-
arch/mips/include/asm/mach-bcm47xx/gpio.h | 55 ++++++++++++++++++-------
drivers/watchdog/bcm47xx_wdt.c | 12 +++++-
9 files changed, 160 insertions(+), 61 deletions(-)
diff --git a/arch/mips/bcm47xx/gpio.c b/arch/mips/bcm47xx/gpio.c
index e4a5ee9..99e1c50 100644
--- a/arch/mips/bcm47xx/gpio.c
+++ b/arch/mips/bcm47xx/gpio.c
@@ -20,42 +20,54 @@ static DECLARE_BITMAP(gpio_in_use, BCM47XX_EXTIF_GPIO_LINES);
int gpio_request(unsigned gpio, const char *tag)
{
- if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
- ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
- return -EINVAL;
+ switch (bcm47xx_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
+ ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+ return -EINVAL;
- if (ssb_extif_available(&ssb_bcm47xx.extif) &&
- ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
- return -EINVAL;
+ if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
+ ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
+ return -EINVAL;
- if (test_and_set_bit(gpio, gpio_in_use))
- return -EBUSY;
+ if (test_and_set_bit(gpio, gpio_in_use))
+ return -EBUSY;
- return 0;
+ return 0;
+ }
+ return -EINVAL;
}
EXPORT_SYMBOL(gpio_request);
void gpio_free(unsigned gpio)
{
- if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
- ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
- return;
+ switch (bcm47xx_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
+ ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+ return;
- if (ssb_extif_available(&ssb_bcm47xx.extif) &&
- ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
- return;
+ if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
+ ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
+ return;
- clear_bit(gpio, gpio_in_use);
+ clear_bit(gpio, gpio_in_use);
+ return;
+ }
}
EXPORT_SYMBOL(gpio_free);
int gpio_to_irq(unsigned gpio)
{
- if (ssb_chipco_available(&ssb_bcm47xx.chipco))
- return ssb_mips_irq(ssb_bcm47xx.chipco.dev) + 2;
- else if (ssb_extif_available(&ssb_bcm47xx.extif))
- return ssb_mips_irq(ssb_bcm47xx.extif.dev) + 2;
- else
- return -EINVAL;
+ switch (bcm47xx_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco))
+ return ssb_mips_irq(bcm47xx_bus.ssb.chipco.dev) + 2;
+ else if (ssb_extif_available(&bcm47xx_bus.ssb.extif))
+ return ssb_mips_irq(bcm47xx_bus.ssb.extif.dev) + 2;
+ else
+ return -EINVAL;
+ }
+ return -EINVAL;
}
EXPORT_SYMBOL_GPL(gpio_to_irq);
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
index 54db815..bcac2ff 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -26,14 +26,21 @@ static char nvram_buf[NVRAM_SPACE];
/* Probe for NVRAM header */
static void early_nvram_init(void)
{
- struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+ struct ssb_mipscore *mcore_ssb;
struct nvram_header *header;
int i;
- u32 base, lim, off;
+ u32 base = 0;
+ u32 lim = 0;
+ u32 off;
u32 *src, *dst;
- base = mcore->flash_window;
- lim = mcore->flash_window_size;
+ switch (bcm47xx_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ mcore_ssb = &bcm47xx_bus.ssb.mipscore;
+ base = mcore_ssb->flash_window;
+ lim = mcore_ssb->flash_window_size;
+ break;
+ }
off = FLASH_MIN;
while (off <= lim) {
diff --git a/arch/mips/bcm47xx/serial.c b/arch/mips/bcm47xx/serial.c
index 59c11af..17c67e2 100644
--- a/arch/mips/bcm47xx/serial.c
+++ b/arch/mips/bcm47xx/serial.c
@@ -23,10 +23,10 @@ static struct platform_device uart8250_device = {
},
};
-static int __init uart8250_init(void)
+static int __init uart8250_init_ssb(void)
{
int i;
- struct ssb_mipscore *mcore = &(ssb_bcm47xx.mipscore);
+ struct ssb_mipscore *mcore = &(bcm47xx_bus.ssb.mipscore);
memset(&uart8250_data, 0, sizeof(uart8250_data));
@@ -45,6 +45,15 @@ static int __init uart8250_init(void)
return platform_device_register(&uart8250_device);
}
+static int __init uart8250_init(void)
+{
+ switch (bcm47xx_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ return uart8250_init_ssb();
+ }
+ return -EINVAL;
+}
+
module_init(uart8250_init);
MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 73b529b..9828b60 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -35,15 +35,22 @@
#include <bcm47xx.h>
#include <asm/mach-bcm47xx/nvram.h>
-struct ssb_bus ssb_bcm47xx;
-EXPORT_SYMBOL(ssb_bcm47xx);
+union bcm47xx_bus bcm47xx_bus;
+EXPORT_SYMBOL(bcm47xx_bus);
+
+enum bcm47xx_bus_type bcm47xx_bus_type;
+EXPORT_SYMBOL(bcm47xx_bus_type);
static void bcm47xx_machine_restart(char *command)
{
printk(KERN_ALERT "Please stand by while rebooting the system...\n");
local_irq_disable();
/* Set the watchdog timer to reset immediately */
- ssb_watchdog_timer_set(&ssb_bcm47xx, 1);
+ switch (bcm47xx_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
+ break;
+ }
while (1)
cpu_relax();
}
@@ -52,7 +59,11 @@ static void bcm47xx_machine_halt(void)
{
/* Disable interrupts and watchdog and spin forever */
local_irq_disable();
- ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
+ switch (bcm47xx_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
+ break;
+ }
while (1)
cpu_relax();
}
@@ -247,7 +258,7 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus,
return 0;
}
-void __init plat_mem_setup(void)
+static void __init bcm47xx_register_ssb(void)
{
int err;
char buf[100];
@@ -258,12 +269,12 @@ void __init plat_mem_setup(void)
printk(KERN_WARNING "bcm47xx: someone else already registered"
" a ssb SPROM callback handler (err %d)\n", err);
- err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
+ err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE,
bcm47xx_get_invariants);
if (err)
panic("Failed to initialize SSB bus (err %d)\n", err);
- mcore = &ssb_bcm47xx.mipscore;
+ mcore = &bcm47xx_bus.ssb.mipscore;
if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
if (strstr(buf, "console=ttyS1")) {
struct ssb_serial_port port;
@@ -276,6 +287,14 @@ void __init plat_mem_setup(void)
memcpy(&mcore->serial_ports[1], &port, sizeof(port));
}
}
+}
+
+void __init plat_mem_setup(void)
+{
+ struct cpuinfo_mips *c = ¤t_cpu_data;
+
+ bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
+ bcm47xx_register_ssb();
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
diff --git a/arch/mips/bcm47xx/time.c b/arch/mips/bcm47xx/time.c
index 0c6f47b..50aea2e 100644
--- a/arch/mips/bcm47xx/time.c
+++ b/arch/mips/bcm47xx/time.c
@@ -30,7 +30,7 @@
void __init plat_time_init(void)
{
- unsigned long hz;
+ unsigned long hz = 0;
/*
* Use deterministic values for initial counter interrupt
@@ -39,7 +39,12 @@ void __init plat_time_init(void)
write_c0_count(0);
write_c0_compare(0xffff);
- hz = ssb_cpu_clock(&ssb_bcm47xx.mipscore) / 2;
+ switch (bcm47xx_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
+ break;
+ }
+
if (!hz)
hz = 100000000;
diff --git a/arch/mips/bcm47xx/wgt634u.c b/arch/mips/bcm47xx/wgt634u.c
index 74d0696..e9f9ec8 100644
--- a/arch/mips/bcm47xx/wgt634u.c
+++ b/arch/mips/bcm47xx/wgt634u.c
@@ -108,7 +108,7 @@ static irqreturn_t gpio_interrupt(int irq, void *ignored)
/* Interrupts are shared, check if the current one is
a GPIO interrupt. */
- if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco,
+ if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
SSB_CHIPCO_IRQ_GPIO))
return IRQ_NONE;
@@ -132,22 +132,26 @@ static int __init wgt634u_init(void)
* machine. Use the MAC address as an heuristic. Netgear Inc. has
* been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
*/
+ u8 *et0mac;
- u8 *et0mac = ssb_bcm47xx.sprom.et0mac;
+ if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
+ return -ENODEV;
+
+ et0mac = bcm47xx_bus.ssb.sprom.et0mac;
if (et0mac[0] == 0x00 &&
((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
(et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
- struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+ struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
printk(KERN_INFO "WGT634U machine detected.\n");
if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
gpio_interrupt, IRQF_SHARED,
- "WGT634U GPIO", &ssb_bcm47xx.chipco)) {
+ "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
gpio_direction_input(WGT634U_GPIO_RESET);
gpio_intmask(WGT634U_GPIO_RESET, 1);
- ssb_chipco_irq_mask(&ssb_bcm47xx.chipco,
+ ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
SSB_CHIPCO_IRQ_GPIO,
SSB_CHIPCO_IRQ_GPIO);
}
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
index d008f47..7cf481b 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -19,7 +19,17 @@
#ifndef __ASM_BCM47XX_H
#define __ASM_BCM47XX_H
-/* SSB bus */
-extern struct ssb_bus ssb_bcm47xx;
+#include <linux/ssb/ssb.h>
+
+enum bcm47xx_bus_type {
+ BCM47XX_BUS_TYPE_SSB,
+};
+
+union bcm47xx_bus {
+ struct ssb_bus ssb;
+};
+
+extern union bcm47xx_bus bcm47xx_bus;
+extern enum bcm47xx_bus_type bcm47xx_bus_type;
#endif /* __ASM_BCM47XX_H */
diff --git a/arch/mips/include/asm/mach-bcm47xx/gpio.h b/arch/mips/include/asm/mach-bcm47xx/gpio.h
index 9850414..6b78827 100644
--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
@@ -21,41 +21,66 @@ extern int gpio_to_irq(unsigned gpio);
static inline int gpio_get_value(unsigned gpio)
{
- return ssb_gpio_in(&ssb_bcm47xx, 1 << gpio);
+ switch (bcm47xx_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
+ }
+ return -EINVAL;
}
static inline void gpio_set_value(unsigned gpio, int value)
{
- ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0);
+ switch (bcm47xx_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
+ value ? 1 << gpio : 0);
+ }
}
static inline int gpio_direction_input(unsigned gpio)
{
- ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 0);
- return 0;
+ switch (bcm47xx_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
+ return 0;
+ }
+ return -EINVAL;
}
static inline int gpio_direction_output(unsigned gpio, int value)
{
- /* first set the gpio out value */
- ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0);
- /* then set the gpio mode */
- ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 1 << gpio);
- return 0;
+ switch (bcm47xx_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ /* first set the gpio out value */
+ ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
+ value ? 1 << gpio : 0);
+ /* then set the gpio mode */
+ ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
+ return 0;
+ }
+ return -EINVAL;
}
static inline int gpio_intmask(unsigned gpio, int value)
{
- ssb_gpio_intmask(&ssb_bcm47xx, 1 << gpio,
- value ? 1 << gpio : 0);
- return 0;
+ switch (bcm47xx_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio,
+ value ? 1 << gpio : 0);
+ return 0;
+ }
+ return -EINVAL;
}
static inline int gpio_polarity(unsigned gpio, int value)
{
- ssb_gpio_polarity(&ssb_bcm47xx, 1 << gpio,
- value ? 1 << gpio : 0);
- return 0;
+ switch (bcm47xx_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio,
+ value ? 1 << gpio : 0);
+ return 0;
+ }
+ return -EINVAL;
}
diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c
index bd44417..c43406c 100644
--- a/drivers/watchdog/bcm47xx_wdt.c
+++ b/drivers/watchdog/bcm47xx_wdt.c
@@ -54,12 +54,20 @@ static atomic_t ticks;
static inline void bcm47xx_wdt_hw_start(void)
{
/* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */
- ssb_watchdog_timer_set(&ssb_bcm47xx, 0xfffffff);
+ switch (bcm47xx_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
+ break;
+ }
}
static inline int bcm47xx_wdt_hw_stop(void)
{
- return ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
+ switch (bcm47xx_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
+ }
+ return -EINVAL;
}
static void bcm47xx_timer_tick(unsigned long unused)
--
1.7.4.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 09/11] bcm47xx: make it possible to build bcm47xx without ssb.
2011-07-22 23:20 ` Hauke Mehrtens
` (8 preceding siblings ...)
(?)
@ 2011-07-22 23:20 ` Hauke Mehrtens
-1 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/Kconfig | 8 +-------
arch/mips/bcm47xx/Kconfig | 18 ++++++++++++++++++
arch/mips/bcm47xx/Makefile | 3 ++-
arch/mips/bcm47xx/gpio.c | 6 ++++++
arch/mips/bcm47xx/nvram.c | 4 ++++
arch/mips/bcm47xx/serial.c | 4 ++++
arch/mips/bcm47xx/setup.c | 8 ++++++++
arch/mips/bcm47xx/time.c | 2 ++
arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 4 ++++
arch/mips/include/asm/mach-bcm47xx/gpio.h | 12 ++++++++++++
arch/mips/pci/pci-bcm47xx.c | 6 ++++++
drivers/watchdog/bcm47xx_wdt.c | 4 ++++
12 files changed, 71 insertions(+), 8 deletions(-)
create mode 100644 arch/mips/bcm47xx/Kconfig
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 653da62..ac6f237 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -91,15 +91,8 @@ config BCM47XX
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
- select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
- select SSB
- select SSB_DRIVER_MIPS
- select SSB_DRIVER_EXTIF
- select SSB_EMBEDDED
- select SSB_B43_PCI_BRIDGE if PCI
- select SSB_PCICORE_HOSTMODE if PCI
select GENERIC_GPIO
select SYS_HAS_EARLY_PRINTK
select CFE
@@ -785,6 +778,7 @@ endchoice
source "arch/mips/alchemy/Kconfig"
source "arch/mips/ath79/Kconfig"
+source "arch/mips/bcm47xx/Kconfig"
source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/jz4740/Kconfig"
diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig
new file mode 100644
index 0000000..0346f92
--- /dev/null
+++ b/arch/mips/bcm47xx/Kconfig
@@ -0,0 +1,18 @@
+if BCM47XX
+
+config BCM47XX_SSB
+ bool "SSB Support for Broadcom BCM47XX"
+ select SYS_HAS_CPU_MIPS32_R1
+ select SSB
+ select SSB_DRIVER_MIPS
+ select SSB_DRIVER_EXTIF
+ select SSB_EMBEDDED
+ select SSB_B43_PCI_BRIDGE if PCI
+ select SSB_PCICORE_HOSTMODE if PCI
+ default y
+ help
+ Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
+
+ This will generate an image with support for SSB and MIPS32 R1 instruction set.
+
+endif
diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile
index 7465e8a..4add173 100644
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -3,4 +3,5 @@
# under Linux.
#
-obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
+obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
+obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
diff --git a/arch/mips/bcm47xx/gpio.c b/arch/mips/bcm47xx/gpio.c
index 99e1c50..2b804c3 100644
--- a/arch/mips/bcm47xx/gpio.c
+++ b/arch/mips/bcm47xx/gpio.c
@@ -21,6 +21,7 @@ static DECLARE_BITMAP(gpio_in_use, BCM47XX_EXTIF_GPIO_LINES);
int gpio_request(unsigned gpio, const char *tag)
{
switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
@@ -34,6 +35,7 @@ int gpio_request(unsigned gpio, const char *tag)
return -EBUSY;
return 0;
+#endif
}
return -EINVAL;
}
@@ -42,6 +44,7 @@ EXPORT_SYMBOL(gpio_request);
void gpio_free(unsigned gpio)
{
switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
@@ -53,6 +56,7 @@ void gpio_free(unsigned gpio)
clear_bit(gpio, gpio_in_use);
return;
+#endif
}
}
EXPORT_SYMBOL(gpio_free);
@@ -60,6 +64,7 @@ EXPORT_SYMBOL(gpio_free);
int gpio_to_irq(unsigned gpio)
{
switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco))
return ssb_mips_irq(bcm47xx_bus.ssb.chipco.dev) + 2;
@@ -67,6 +72,7 @@ int gpio_to_irq(unsigned gpio)
return ssb_mips_irq(bcm47xx_bus.ssb.extif.dev) + 2;
else
return -EINVAL;
+#endif
}
return -EINVAL;
}
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
index bcac2ff..4e994ed 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -26,7 +26,9 @@ static char nvram_buf[NVRAM_SPACE];
/* Probe for NVRAM header */
static void early_nvram_init(void)
{
+#ifdef CONFIG_BCM47XX_SSB
struct ssb_mipscore *mcore_ssb;
+#endif
struct nvram_header *header;
int i;
u32 base = 0;
@@ -35,11 +37,13 @@ static void early_nvram_init(void)
u32 *src, *dst;
switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
mcore_ssb = &bcm47xx_bus.ssb.mipscore;
base = mcore_ssb->flash_window;
lim = mcore_ssb->flash_window_size;
break;
+#endif
}
off = FLASH_MIN;
diff --git a/arch/mips/bcm47xx/serial.c b/arch/mips/bcm47xx/serial.c
index 17c67e2..fcef688 100644
--- a/arch/mips/bcm47xx/serial.c
+++ b/arch/mips/bcm47xx/serial.c
@@ -23,6 +23,7 @@ static struct platform_device uart8250_device = {
},
};
+#ifdef CONFIG_BCM47XX_SSB
static int __init uart8250_init_ssb(void)
{
int i;
@@ -44,12 +45,15 @@ static int __init uart8250_init_ssb(void)
}
return platform_device_register(&uart8250_device);
}
+#endif
static int __init uart8250_init(void)
{
switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
return uart8250_init_ssb();
+#endif
}
return -EINVAL;
}
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 9828b60..39e8465 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -47,9 +47,11 @@ static void bcm47xx_machine_restart(char *command)
local_irq_disable();
/* Set the watchdog timer to reset immediately */
switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
break;
+#endif
}
while (1)
cpu_relax();
@@ -60,14 +62,17 @@ static void bcm47xx_machine_halt(void)
/* Disable interrupts and watchdog and spin forever */
local_irq_disable();
switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
break;
+#endif
}
while (1)
cpu_relax();
}
+#ifdef CONFIG_BCM47XX_SSB
#define READ_FROM_NVRAM(_outvar, name, buf) \
if (nvram_getprefix(prefix, name, buf, sizeof(buf)) >= 0)\
sprom->_outvar = simple_strtoul(buf, NULL, 0);
@@ -288,13 +293,16 @@ static void __init bcm47xx_register_ssb(void)
}
}
}
+#endif
void __init plat_mem_setup(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
+#ifdef CONFIG_BCM47XX_SSB
bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
bcm47xx_register_ssb();
+#endif
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
diff --git a/arch/mips/bcm47xx/time.c b/arch/mips/bcm47xx/time.c
index 50aea2e..03dfc65 100644
--- a/arch/mips/bcm47xx/time.c
+++ b/arch/mips/bcm47xx/time.c
@@ -40,9 +40,11 @@ void __init plat_time_init(void)
write_c0_compare(0xffff);
switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
break;
+#endif
}
if (!hz)
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
index 7cf481b..d037afb 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -22,11 +22,15 @@
#include <linux/ssb/ssb.h>
enum bcm47xx_bus_type {
+#ifdef CONFIG_BCM47XX_SSB
BCM47XX_BUS_TYPE_SSB,
+#endif
};
union bcm47xx_bus {
+#ifdef CONFIG_BCM47XX_SSB
struct ssb_bus ssb;
+#endif
};
extern union bcm47xx_bus bcm47xx_bus;
diff --git a/arch/mips/include/asm/mach-bcm47xx/gpio.h b/arch/mips/include/asm/mach-bcm47xx/gpio.h
index 6b78827..1d5f5af 100644
--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
@@ -22,8 +22,10 @@ extern int gpio_to_irq(unsigned gpio);
static inline int gpio_get_value(unsigned gpio)
{
switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
+#endif
}
return -EINVAL;
}
@@ -31,18 +33,22 @@ static inline int gpio_get_value(unsigned gpio)
static inline void gpio_set_value(unsigned gpio, int value)
{
switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
value ? 1 << gpio : 0);
+#endif
}
}
static inline int gpio_direction_input(unsigned gpio)
{
switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
return 0;
+#endif
}
return -EINVAL;
}
@@ -50,6 +56,7 @@ static inline int gpio_direction_input(unsigned gpio)
static inline int gpio_direction_output(unsigned gpio, int value)
{
switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
/* first set the gpio out value */
ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
@@ -57,6 +64,7 @@ static inline int gpio_direction_output(unsigned gpio, int value)
/* then set the gpio mode */
ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
return 0;
+#endif
}
return -EINVAL;
}
@@ -64,10 +72,12 @@ static inline int gpio_direction_output(unsigned gpio, int value)
static inline int gpio_intmask(unsigned gpio, int value)
{
switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio,
value ? 1 << gpio : 0);
return 0;
+#endif
}
return -EINVAL;
}
@@ -75,10 +85,12 @@ static inline int gpio_intmask(unsigned gpio, int value)
static inline int gpio_polarity(unsigned gpio, int value)
{
switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio,
value ? 1 << gpio : 0);
return 0;
+#endif
}
return -EINVAL;
}
diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c
index 455f8e5..400535a 100644
--- a/arch/mips/pci/pci-bcm47xx.c
+++ b/arch/mips/pci/pci-bcm47xx.c
@@ -25,6 +25,7 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/ssb/ssb.h>
+#include <bcm47xx.h>
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
@@ -33,9 +34,13 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_plat_dev_init(struct pci_dev *dev)
{
+#ifdef CONFIG_BCM47XX_SSB
int res;
u8 slot, pin;
+ if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
+ return 0;
+
res = ssb_pcibios_plat_dev_init(dev);
if (res < 0) {
printk(KERN_ALERT "PCI: Failed to init device %s\n",
@@ -55,5 +60,6 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
}
dev->irq = res;
+#endif
return 0;
}
diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c
index c43406c..6b03702 100644
--- a/drivers/watchdog/bcm47xx_wdt.c
+++ b/drivers/watchdog/bcm47xx_wdt.c
@@ -55,17 +55,21 @@ static inline void bcm47xx_wdt_hw_start(void)
{
/* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */
switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
break;
+#endif
}
}
static inline int bcm47xx_wdt_hw_stop(void)
{
switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
+#endif
}
return -EINVAL;
}
--
1.7.4.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 10/11] bcm47xx: add support for bcma bus
2011-07-22 23:20 ` Hauke Mehrtens
` (9 preceding siblings ...)
(?)
@ 2011-07-22 23:20 ` Hauke Mehrtens
-1 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
This patch add support for the bcma bus. Broadcom uses only Mips 74K
CPUs on the new SoC and on the old ons using ssb bus there are no Mips
74K CPUs.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/bcm47xx/Kconfig | 13 ++++++
arch/mips/bcm47xx/gpio.c | 22 +++++++++++
arch/mips/bcm47xx/nvram.c | 10 +++++
arch/mips/bcm47xx/serial.c | 29 ++++++++++++++
arch/mips/bcm47xx/setup.c | 53 +++++++++++++++++++++++++-
arch/mips/bcm47xx/time.c | 5 ++
arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 8 ++++
arch/mips/include/asm/mach-bcm47xx/gpio.h | 41 ++++++++++++++++++++
drivers/watchdog/bcm47xx_wdt.c | 11 +++++
9 files changed, 190 insertions(+), 2 deletions(-)
diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig
index 0346f92..6210b8d 100644
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -15,4 +15,17 @@ config BCM47XX_SSB
This will generate an image with support for SSB and MIPS32 R1 instruction set.
+config BCM47XX_BCMA
+ bool "BCMA Support for Broadcom BCM47XX"
+ select SYS_HAS_CPU_MIPS32_R2
+ select BCMA
+ select BCMA_HOST_SOC
+ select BCMA_DRIVER_MIPS
+ select BCMA_DRIVER_PCI_HOSTMODE if PCI
+ default y
+ help
+ Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
+
+ This will generate an image with support for BCMA and MIPS32 R2 instruction set.
+
endif
diff --git a/arch/mips/bcm47xx/gpio.c b/arch/mips/bcm47xx/gpio.c
index 2b804c3..57b425f 100644
--- a/arch/mips/bcm47xx/gpio.c
+++ b/arch/mips/bcm47xx/gpio.c
@@ -36,6 +36,16 @@ int gpio_request(unsigned gpio, const char *tag)
return 0;
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
+ return -EINVAL;
+
+ if (test_and_set_bit(gpio, gpio_in_use))
+ return -EBUSY;
+
+ return 0;
+#endif
}
return -EINVAL;
}
@@ -57,6 +67,14 @@ void gpio_free(unsigned gpio)
clear_bit(gpio, gpio_in_use);
return;
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
+ return;
+
+ clear_bit(gpio, gpio_in_use);
+ return;
+#endif
}
}
EXPORT_SYMBOL(gpio_free);
@@ -73,6 +91,10 @@ int gpio_to_irq(unsigned gpio)
else
return -EINVAL;
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ return bcma_core_mips_irq(bcm47xx_bus.bcma.bus.drv_cc.core) + 2;
+#endif
}
return -EINVAL;
}
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
index 4e994ed..a84e3bb 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -29,6 +29,9 @@ static void early_nvram_init(void)
#ifdef CONFIG_BCM47XX_SSB
struct ssb_mipscore *mcore_ssb;
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ struct bcma_drv_cc *bcma_cc;
+#endif
struct nvram_header *header;
int i;
u32 base = 0;
@@ -44,6 +47,13 @@ static void early_nvram_init(void)
lim = mcore_ssb->flash_window_size;
break;
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc;
+ base = bcma_cc->pflash.window;
+ lim = bcma_cc->pflash.window_size;
+ break;
+#endif
}
off = FLASH_MIN;
diff --git a/arch/mips/bcm47xx/serial.c b/arch/mips/bcm47xx/serial.c
index fcef688..57981e4 100644
--- a/arch/mips/bcm47xx/serial.c
+++ b/arch/mips/bcm47xx/serial.c
@@ -47,6 +47,31 @@ static int __init uart8250_init_ssb(void)
}
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+static int __init uart8250_init_bcma(void)
+{
+ int i;
+ struct bcma_drv_cc *cc = &(bcm47xx_bus.bcma.bus.drv_cc);
+
+ memset(&uart8250_data, 0, sizeof(uart8250_data));
+
+ for (i = 0; i < cc->nr_serial_ports; i++) {
+ struct plat_serial8250_port *p = &(uart8250_data[i]);
+ struct bcma_serial_port *bcma_port;
+ bcma_port = &(cc->serial_ports[i]);
+
+ p->mapbase = (unsigned int) bcma_port->regs;
+ p->membase = (void *) bcma_port->regs;
+ p->irq = bcma_port->irq + 2;
+ p->uartclk = bcma_port->baud_base;
+ p->regshift = bcma_port->reg_shift;
+ p->iotype = UPIO_MEM;
+ p->flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ }
+ return platform_device_register(&uart8250_device);
+}
+#endif
+
static int __init uart8250_init(void)
{
switch (bcm47xx_bus_type) {
@@ -54,6 +79,10 @@ static int __init uart8250_init(void)
case BCM47XX_BUS_TYPE_SSB:
return uart8250_init_ssb();
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ return uart8250_init_bcma();
+#endif
}
return -EINVAL;
}
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 39e8465..ab45b08 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -29,6 +29,7 @@
#include <linux/types.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
+#include <linux/bcma/bcma_soc.h>
#include <asm/bootinfo.h>
#include <asm/reboot.h>
#include <asm/time.h>
@@ -52,6 +53,11 @@ static void bcm47xx_machine_restart(char *command)
ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
break;
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1);
+ break;
+#endif
}
while (1)
cpu_relax();
@@ -67,6 +73,11 @@ static void bcm47xx_machine_halt(void)
ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
break;
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
+ break;
+#endif
}
while (1)
cpu_relax();
@@ -295,16 +306,54 @@ static void __init bcm47xx_register_ssb(void)
}
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+static void __init bcm47xx_register_bcma(void)
+{
+ int err;
+
+ err = bcma_host_soc_register(&bcm47xx_bus.bcma);
+ if (err)
+ panic("Failed to initialize BCMA bus (err %d)\n", err);
+}
+#endif
+
void __init plat_mem_setup(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
+ if (c->cputype == CPU_74K) {
+ printk(KERN_INFO "bcm47xx: using bcma bus\n");
+#ifdef CONFIG_BCM47XX_BCMA
+ bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
+ bcm47xx_register_bcma();
+#endif
+ } else {
+ printk(KERN_INFO "bcm47xx: using ssb bus\n");
#ifdef CONFIG_BCM47XX_SSB
- bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
- bcm47xx_register_ssb();
+ bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
+ bcm47xx_register_ssb();
#endif
+ }
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
}
+
+static int __init bcm47xx_register_bus_complete(void)
+{
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ /* Nothing to do */
+ break;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_bus_register(&bcm47xx_bus.bcma.bus);
+ break;
+#endif
+ }
+ return 0;
+}
+device_initcall(bcm47xx_register_bus_complete);
diff --git a/arch/mips/bcm47xx/time.c b/arch/mips/bcm47xx/time.c
index 03dfc65..536374d 100644
--- a/arch/mips/bcm47xx/time.c
+++ b/arch/mips/bcm47xx/time.c
@@ -45,6 +45,11 @@ void __init plat_time_init(void)
hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
break;
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2;
+ break;
+#endif
}
if (!hz)
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
index d037afb..de95e07 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -20,17 +20,25 @@
#define __ASM_BCM47XX_H
#include <linux/ssb/ssb.h>
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_soc.h>
enum bcm47xx_bus_type {
#ifdef CONFIG_BCM47XX_SSB
BCM47XX_BUS_TYPE_SSB,
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ BCM47XX_BUS_TYPE_BCMA,
+#endif
};
union bcm47xx_bus {
#ifdef CONFIG_BCM47XX_SSB
struct ssb_bus ssb;
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ struct bcma_soc bcma;
+#endif
};
extern union bcm47xx_bus bcm47xx_bus;
diff --git a/arch/mips/include/asm/mach-bcm47xx/gpio.h b/arch/mips/include/asm/mach-bcm47xx/gpio.h
index 1d5f5af..76961ca 100644
--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
@@ -10,6 +10,7 @@
#define __BCM47XX_GPIO_H
#include <linux/ssb/ssb_embedded.h>
+#include <linux/bcma/bcma.h>
#include <asm/mach-bcm47xx/bcm47xx.h>
#define BCM47XX_EXTIF_GPIO_LINES 5
@@ -26,6 +27,11 @@ static inline int gpio_get_value(unsigned gpio)
case BCM47XX_BUS_TYPE_SSB:
return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc,
+ 1 << gpio);
+#endif
}
return -EINVAL;
}
@@ -37,6 +43,13 @@ static inline void gpio_set_value(unsigned gpio, int value)
case BCM47XX_BUS_TYPE_SSB:
ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
value ? 1 << gpio : 0);
+ return;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
+ value ? 1 << gpio : 0);
+ return;
#endif
}
}
@@ -49,6 +62,12 @@ static inline int gpio_direction_input(unsigned gpio)
ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
return 0;
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
+ 0);
+ return 0;
+#endif
}
return -EINVAL;
}
@@ -65,6 +84,16 @@ static inline int gpio_direction_output(unsigned gpio, int value)
ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
return 0;
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ /* first set the gpio out value */
+ bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
+ value ? 1 << gpio : 0);
+ /* then set the gpio mode */
+ bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
+ 1 << gpio);
+ return 0;
+#endif
}
return -EINVAL;
}
@@ -78,6 +107,12 @@ static inline int gpio_intmask(unsigned gpio, int value)
value ? 1 << gpio : 0);
return 0;
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc,
+ 1 << gpio, value ? 1 << gpio : 0);
+ return 0;
+#endif
}
return -EINVAL;
}
@@ -91,6 +126,12 @@ static inline int gpio_polarity(unsigned gpio, int value)
value ? 1 << gpio : 0);
return 0;
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc,
+ 1 << gpio, value ? 1 << gpio : 0);
+ return 0;
+#endif
}
return -EINVAL;
}
diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c
index 6b03702..5c5f4b1 100644
--- a/drivers/watchdog/bcm47xx_wdt.c
+++ b/drivers/watchdog/bcm47xx_wdt.c
@@ -60,6 +60,12 @@ static inline void bcm47xx_wdt_hw_start(void)
ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
break;
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc,
+ 0xfffffff);
+ break;
+#endif
}
}
@@ -70,6 +76,11 @@ static inline int bcm47xx_wdt_hw_stop(void)
case BCM47XX_BUS_TYPE_SSB:
return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
+ return 0;
+#endif
}
return -EINVAL;
}
--
1.7.4.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 11/11] bcm47xx: fix irq assignment for new SoCs.
2011-07-22 23:20 ` Hauke Mehrtens
` (10 preceding siblings ...)
(?)
@ 2011-07-22 23:20 ` Hauke Mehrtens
-1 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-07-22 23:20 UTC (permalink / raw)
To: linville, linux-wireless, linux-mips
Cc: jonas.gorski, ralf, zajec5, mb, george, arend, b43-dev,
bernhardloos, arnd, julian.calaby, sshtylyov, Hauke Mehrtens
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/bcm47xx/irq.c | 12 ++++++++++++
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/mips/bcm47xx/irq.c b/arch/mips/bcm47xx/irq.c
index 325757a..8cf3833 100644
--- a/arch/mips/bcm47xx/irq.c
+++ b/arch/mips/bcm47xx/irq.c
@@ -26,6 +26,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/irq_cpu.h>
+#include <bcm47xx.h>
void plat_irq_dispatch(void)
{
@@ -51,5 +52,16 @@ void plat_irq_dispatch(void)
void __init arch_init_irq(void)
{
+#ifdef CONFIG_BCM47XX_BCMA
+ if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) {
+ bcma_write32(bcm47xx_bus.bcma.bus.drv_mips.core,
+ BCMA_MIPS_MIPS74K_INTMASK(5), 1 << 31);
+ /*
+ * the kernel reads the timer irq from some register and thinks
+ * it's #5, but we offset it by 2 and route to #7
+ */
+ cp0_compare_irq = 7;
+ }
+#endif
mips_cpu_irq_init();
}
--
1.7.4.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH v3 00/11] bcma: add support for embedded devices like bcm4716
2011-07-22 23:20 ` Hauke Mehrtens
@ 2011-07-25 18:42 ` John W. Linville
-1 siblings, 0 replies; 26+ messages in thread
From: John W. Linville @ 2011-07-25 18:42 UTC (permalink / raw)
To: Hauke Mehrtens
Cc: linux-wireless, linux-mips, jonas.gorski, ralf, zajec5, mb,
george, arend, b43-dev, bernhardloos, arnd, julian.calaby,
sshtylyov
On Sat, Jul 23, 2011 at 01:20:04AM +0200, Hauke Mehrtens wrote:
> This patch series adds support for embedded devices like bcm47xx to
> bcma. Bcma is used on bcm4716 and bcm4718 SoCs as the system bus and
> replaced ssb used on older devices. With these patches my bcm4716
> device boots up till it tries to access the flash, because the serial
> flash chip is unsupported for now, this will be my next task. This adds
> support for MIPS cores, interrupt configuration and the serial console.
>
> These patches are not containing all functions needed to get the SoC to
> fully work and support every feature, but it is a good start.
> These patches are now integrated in OpenWrt for everyone how wants to
> test them.
>
> This was tested with a BCM4704 device (SoC with ssb bus), a BCM4716
> device and a pcie wireless card supported by bcma.
>
> @John could you please merge this into wireless-testing. I hope Ralf is
> fine with it when some MIPS bits will go through wireless. This will
> make it much easier for Linus to merge wireless-testing and the mips
> tree together as there are many other changes for bcma in wireless-
> testing.
Any chance we could see an ACK from Ralf?
John
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v3 00/11] bcma: add support for embedded devices like bcm4716
@ 2011-07-25 18:42 ` John W. Linville
0 siblings, 0 replies; 26+ messages in thread
From: John W. Linville @ 2011-07-25 18:42 UTC (permalink / raw)
To: Hauke Mehrtens
Cc: linux-wireless, linux-mips, jonas.gorski, ralf, zajec5, mb,
george, arend, b43-dev, bernhardloos, arnd, julian.calaby,
sshtylyov
On Sat, Jul 23, 2011 at 01:20:04AM +0200, Hauke Mehrtens wrote:
> This patch series adds support for embedded devices like bcm47xx to
> bcma. Bcma is used on bcm4716 and bcm4718 SoCs as the system bus and
> replaced ssb used on older devices. With these patches my bcm4716
> device boots up till it tries to access the flash, because the serial
> flash chip is unsupported for now, this will be my next task. This adds
> support for MIPS cores, interrupt configuration and the serial console.
>
> These patches are not containing all functions needed to get the SoC to
> fully work and support every feature, but it is a good start.
> These patches are now integrated in OpenWrt for everyone how wants to
> test them.
>
> This was tested with a BCM4704 device (SoC with ssb bus), a BCM4716
> device and a pcie wireless card supported by bcma.
>
> @John could you please merge this into wireless-testing. I hope Ralf is
> fine with it when some MIPS bits will go through wireless. This will
> make it much easier for Linus to merge wireless-testing and the mips
> tree together as there are many other changes for bcma in wireless-
> testing.
Any chance we could see an ACK from Ralf?
John
--
John W. Linville Someday the world will need a hero, and you
linville at tuxdriver.com might be all we have. Be ready.
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v3 00/11] bcma: add support for embedded devices like bcm4716
2011-07-22 23:20 ` Hauke Mehrtens
` (12 preceding siblings ...)
(?)
@ 2011-07-27 20:06 ` Ralf Baechle
-1 siblings, 0 replies; 26+ messages in thread
From: Ralf Baechle @ 2011-07-27 20:06 UTC (permalink / raw)
To: Hauke Mehrtens
Cc: linville, linux-wireless, linux-mips, jonas.gorski, zajec5, mb,
george, arend, b43-dev, bernhardloos, arnd, julian.calaby,
sshtylyov
On Sat, Jul 23, 2011 at 01:20:04AM +0200, Hauke Mehrtens wrote:
> This patch series adds support for embedded devices like bcm47xx to
> bcma. Bcma is used on bcm4716 and bcm4718 SoCs as the system bus and
> replaced ssb used on older devices. With these patches my bcm4716
> device boots up till it tries to access the flash, because the serial
> flash chip is unsupported for now, this will be my next task. This adds
> support for MIPS cores, interrupt configuration and the serial console.
>
> These patches are not containing all functions needed to get the SoC to
> fully work and support every feature, but it is a good start.
> These patches are now integrated in OpenWrt for everyone how wants to
> test them.
>
> This was tested with a BCM4704 device (SoC with ssb bus), a BCM4716
> device and a pcie wireless card supported by bcma.
>
> @John could you please merge this into wireless-testing. I hope Ralf is
> fine with it when some MIPS bits will go through wireless. This will
> make it much easier for Linus to merge wireless-testing and the mips
> tree together as there are many other changes for bcma in wireless-
> testing.
John, if you want to merge the MIPS bits through the wireless tree, feel
free to:
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Ralf
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 06/11] bcma: add serial console support
2011-07-22 23:20 ` [PATCH 06/11] bcma: add serial console support Hauke Mehrtens
@ 2011-07-29 21:04 ` Rafał Miłecki
0 siblings, 0 replies; 26+ messages in thread
From: Rafał Miłecki @ 2011-07-29 21:04 UTC (permalink / raw)
To: Hauke Mehrtens
Cc: linville, linux-wireless, linux-mips, jonas.gorski, ralf, mb,
george, arend, b43-dev, bernhardloos, arnd, julian.calaby,
sshtylyov
2011/7/23 Hauke Mehrtens <hauke@hauke-m.de>:
> This adds support for serial console to bcma, when operating on an SoC.
>
> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
> ---
> drivers/bcma/bcma_private.h | 8 ++++
> drivers/bcma/driver_chipcommon.c | 48 +++++++++++++++++++++++++++
> drivers/bcma/driver_chipcommon_pmu.c | 26 ++++++++++++++
> drivers/bcma/driver_mips.c | 1 +
> include/linux/bcma/bcma_driver_chipcommon.h | 14 ++++++++
> 5 files changed, 97 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
> index b97633d..22d3052 100644
> --- a/drivers/bcma/bcma_private.h
> +++ b/drivers/bcma/bcma_private.h
> @@ -29,6 +29,14 @@ void bcma_init_bus(struct bcma_bus *bus);
> /* sprom.c */
> int bcma_sprom_get(struct bcma_bus *bus);
>
> +/* driver_chipcommon.c */
> +#ifdef CONFIG_BCMA_DRIVER_MIPS
> +void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
> +#endif /* CONFIG_BCMA_DRIVER_MIPS */
> +
> +/* driver_chipcommon_pmu.c */
> +u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
> +
> #ifdef CONFIG_BCMA_HOST_PCI
> /* host_pci.c */
> extern int __init bcma_host_pci_init(void);
Not sure, what do you think about this, feel free to comment.
My idea was to use bcma_private.h for bcma-internal functions. For
example, support for PCI host or SoC host, is something "internal" (as
I call it) for bcma. Drivers in theory could be separated modules and
I use include/linux/bcma/driver_*.h for them.
If following this schema, declarations of
bcma_pmu_alp_clock
bcma_host_pci_init
should be in include/linux/bcma/bcma_driver_chipcommon.h
--
Rafał
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 06/11] bcma: add serial console support
@ 2011-07-29 21:04 ` Rafał Miłecki
0 siblings, 0 replies; 26+ messages in thread
From: Rafał Miłecki @ 2011-07-29 21:04 UTC (permalink / raw)
To: Hauke Mehrtens
Cc: linville, linux-wireless, linux-mips, jonas.gorski, ralf, mb,
george, arend, b43-dev, bernhardloos, arnd, julian.calaby,
sshtylyov
2011/7/23 Hauke Mehrtens <hauke@hauke-m.de>:
> This adds support for serial console to bcma, when operating on an SoC.
>
> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
> ---
> ?drivers/bcma/bcma_private.h ? ? ? ? ? ? ? ? | ? ?8 ++++
> ?drivers/bcma/driver_chipcommon.c ? ? ? ? ? ?| ? 48 +++++++++++++++++++++++++++
> ?drivers/bcma/driver_chipcommon_pmu.c ? ? ? ?| ? 26 ++++++++++++++
> ?drivers/bcma/driver_mips.c ? ? ? ? ? ? ? ? ?| ? ?1 +
> ?include/linux/bcma/bcma_driver_chipcommon.h | ? 14 ++++++++
> ?5 files changed, 97 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
> index b97633d..22d3052 100644
> --- a/drivers/bcma/bcma_private.h
> +++ b/drivers/bcma/bcma_private.h
> @@ -29,6 +29,14 @@ void bcma_init_bus(struct bcma_bus *bus);
> ?/* sprom.c */
> ?int bcma_sprom_get(struct bcma_bus *bus);
>
> +/* driver_chipcommon.c */
> +#ifdef CONFIG_BCMA_DRIVER_MIPS
> +void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
> +#endif /* CONFIG_BCMA_DRIVER_MIPS */
> +
> +/* driver_chipcommon_pmu.c */
> +u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
> +
> ?#ifdef CONFIG_BCMA_HOST_PCI
> ?/* host_pci.c */
> ?extern int __init bcma_host_pci_init(void);
Not sure, what do you think about this, feel free to comment.
My idea was to use bcma_private.h for bcma-internal functions. For
example, support for PCI host or SoC host, is something "internal" (as
I call it) for bcma. Drivers in theory could be separated modules and
I use include/linux/bcma/driver_*.h for them.
If following this schema, declarations of
bcma_pmu_alp_clock
bcma_host_pci_init
should be in include/linux/bcma/bcma_driver_chipcommon.h
--
Rafa?
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 06/11] bcma: add serial console support
2011-07-29 21:04 ` Rafał Miłecki
@ 2011-07-29 21:06 ` Rafał Miłecki
-1 siblings, 0 replies; 26+ messages in thread
From: Rafał Miłecki @ 2011-07-29 21:06 UTC (permalink / raw)
To: Hauke Mehrtens
Cc: linville, linux-wireless, linux-mips, jonas.gorski, ralf, mb,
george, arend, b43-dev, bernhardloos, arnd, julian.calaby,
sshtylyov
W dniu 29 lipca 2011 23:04 użytkownik Rafał Miłecki <zajec5@gmail.com> napisał:
> 2011/7/23 Hauke Mehrtens <hauke@hauke-m.de>:
>> This adds support for serial console to bcma, when operating on an SoC.
>>
>> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
>> ---
>> drivers/bcma/bcma_private.h | 8 ++++
>> drivers/bcma/driver_chipcommon.c | 48 +++++++++++++++++++++++++++
>> drivers/bcma/driver_chipcommon_pmu.c | 26 ++++++++++++++
>> drivers/bcma/driver_mips.c | 1 +
>> include/linux/bcma/bcma_driver_chipcommon.h | 14 ++++++++
>> 5 files changed, 97 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
>> index b97633d..22d3052 100644
>> --- a/drivers/bcma/bcma_private.h
>> +++ b/drivers/bcma/bcma_private.h
>> @@ -29,6 +29,14 @@ void bcma_init_bus(struct bcma_bus *bus);
>> /* sprom.c */
>> int bcma_sprom_get(struct bcma_bus *bus);
>>
>> +/* driver_chipcommon.c */
>> +#ifdef CONFIG_BCMA_DRIVER_MIPS
>> +void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
>> +#endif /* CONFIG_BCMA_DRIVER_MIPS */
>> +
>> +/* driver_chipcommon_pmu.c */
>> +u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
>> +
>> #ifdef CONFIG_BCMA_HOST_PCI
>> /* host_pci.c */
>> extern int __init bcma_host_pci_init(void);
>
> Not sure, what do you think about this, feel free to comment.
>
> My idea was to use bcma_private.h for bcma-internal functions. For
> example, support for PCI host or SoC host, is something "internal" (as
> I call it) for bcma. Drivers in theory could be separated modules and
> I use include/linux/bcma/driver_*.h for them.
>
> If following this schema, declarations of
> bcma_pmu_alp_clock
> bcma_host_pci_init
> should be in include/linux/bcma/bcma_driver_chipcommon.h
Same goes to the
bcma_pmu_get_clockcpu
from patch 07/11.
Sorry for late-noticing this.
I don't have more comments against your patch set :) Hope John will
take it soon :)
--
Rafał
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 06/11] bcma: add serial console support
@ 2011-07-29 21:06 ` Rafał Miłecki
0 siblings, 0 replies; 26+ messages in thread
From: Rafał Miłecki @ 2011-07-29 21:06 UTC (permalink / raw)
To: Hauke Mehrtens
Cc: linville, linux-wireless, linux-mips, jonas.gorski, ralf, mb,
george, arend, b43-dev, bernhardloos, arnd, julian.calaby,
sshtylyov
W dniu 29 lipca 2011 23:04 u?ytkownik Rafa? Mi?ecki <zajec5@gmail.com> napisa?:
> 2011/7/23 Hauke Mehrtens <hauke@hauke-m.de>:
>> This adds support for serial console to bcma, when operating on an SoC.
>>
>> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
>> ---
>> ?drivers/bcma/bcma_private.h ? ? ? ? ? ? ? ? | ? ?8 ++++
>> ?drivers/bcma/driver_chipcommon.c ? ? ? ? ? ?| ? 48 +++++++++++++++++++++++++++
>> ?drivers/bcma/driver_chipcommon_pmu.c ? ? ? ?| ? 26 ++++++++++++++
>> ?drivers/bcma/driver_mips.c ? ? ? ? ? ? ? ? ?| ? ?1 +
>> ?include/linux/bcma/bcma_driver_chipcommon.h | ? 14 ++++++++
>> ?5 files changed, 97 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
>> index b97633d..22d3052 100644
>> --- a/drivers/bcma/bcma_private.h
>> +++ b/drivers/bcma/bcma_private.h
>> @@ -29,6 +29,14 @@ void bcma_init_bus(struct bcma_bus *bus);
>> ?/* sprom.c */
>> ?int bcma_sprom_get(struct bcma_bus *bus);
>>
>> +/* driver_chipcommon.c */
>> +#ifdef CONFIG_BCMA_DRIVER_MIPS
>> +void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
>> +#endif /* CONFIG_BCMA_DRIVER_MIPS */
>> +
>> +/* driver_chipcommon_pmu.c */
>> +u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
>> +
>> ?#ifdef CONFIG_BCMA_HOST_PCI
>> ?/* host_pci.c */
>> ?extern int __init bcma_host_pci_init(void);
>
> Not sure, what do you think about this, feel free to comment.
>
> My idea was to use bcma_private.h for bcma-internal functions. For
> example, support for PCI host or SoC host, is something "internal" (as
> I call it) for bcma. Drivers in theory could be separated modules and
> I use include/linux/bcma/driver_*.h for them.
>
> If following this schema, declarations of
> bcma_pmu_alp_clock
> bcma_host_pci_init
> should be in include/linux/bcma/bcma_driver_chipcommon.h
Same goes to the
bcma_pmu_get_clockcpu
from patch 07/11.
Sorry for late-noticing this.
I don't have more comments against your patch set :) Hope John will
take it soon :)
--
Rafa?
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 06/11] bcma: add serial console support
2011-07-29 21:06 ` Rafał Miłecki
@ 2011-08-10 7:14 ` Hauke Mehrtens
-1 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-08-10 7:14 UTC (permalink / raw)
To: Rafał Miłecki
Cc: linville, linux-wireless, linux-mips, jonas.gorski, ralf, mb,
george, arend, b43-dev, bernhardloos, arnd, julian.calaby,
sshtylyov
On 07/29/2011 11:06 PM, Rafał Miłecki wrote:
> W dniu 29 lipca 2011 23:04 użytkownik Rafał Miłecki <zajec5@gmail.com> napisał:
>> 2011/7/23 Hauke Mehrtens <hauke@hauke-m.de>:
>>> This adds support for serial console to bcma, when operating on an SoC.
>>>
>>> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
>>> ---
>>> drivers/bcma/bcma_private.h | 8 ++++
>>> drivers/bcma/driver_chipcommon.c | 48 +++++++++++++++++++++++++++
>>> drivers/bcma/driver_chipcommon_pmu.c | 26 ++++++++++++++
>>> drivers/bcma/driver_mips.c | 1 +
>>> include/linux/bcma/bcma_driver_chipcommon.h | 14 ++++++++
>>> 5 files changed, 97 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
>>> index b97633d..22d3052 100644
>>> --- a/drivers/bcma/bcma_private.h
>>> +++ b/drivers/bcma/bcma_private.h
>>> @@ -29,6 +29,14 @@ void bcma_init_bus(struct bcma_bus *bus);
>>> /* sprom.c */
>>> int bcma_sprom_get(struct bcma_bus *bus);
>>>
>>> +/* driver_chipcommon.c */
>>> +#ifdef CONFIG_BCMA_DRIVER_MIPS
>>> +void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
>>> +#endif /* CONFIG_BCMA_DRIVER_MIPS */
>>> +
>>> +/* driver_chipcommon_pmu.c */
>>> +u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
>>> +
>>> #ifdef CONFIG_BCMA_HOST_PCI
>>> /* host_pci.c */
>>> extern int __init bcma_host_pci_init(void);
>>
>> Not sure, what do you think about this, feel free to comment.
>>
>> My idea was to use bcma_private.h for bcma-internal functions. For
>> example, support for PCI host or SoC host, is something "internal" (as
>> I call it) for bcma. Drivers in theory could be separated modules and
>> I use include/linux/bcma/driver_*.h for them.
>>
>> If following this schema, declarations of
>> bcma_pmu_alp_clock
>> bcma_host_pci_init
>> should be in include/linux/bcma/bcma_driver_chipcommon.h
>
> Same goes to the
> bcma_pmu_get_clockcpu
> from patch 07/11.
>
> Sorry for late-noticing this.
>
> I don't have more comments against your patch set :) Hope John will
> take it soon :)
>
This sounds good. I will send a new patch moving the method declaration
to bcma_driver_chipcommon.h for these 3 functions.
Hauke
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 06/11] bcma: add serial console support
@ 2011-08-10 7:14 ` Hauke Mehrtens
0 siblings, 0 replies; 26+ messages in thread
From: Hauke Mehrtens @ 2011-08-10 7:14 UTC (permalink / raw)
To: Rafał Miłecki
Cc: linville, linux-wireless, linux-mips, jonas.gorski, ralf, mb,
george, arend, b43-dev, bernhardloos, arnd, julian.calaby,
sshtylyov
On 07/29/2011 11:06 PM, Rafa? Mi?ecki wrote:
> W dniu 29 lipca 2011 23:04 u?ytkownik Rafa? Mi?ecki <zajec5@gmail.com> napisa?:
>> 2011/7/23 Hauke Mehrtens <hauke@hauke-m.de>:
>>> This adds support for serial console to bcma, when operating on an SoC.
>>>
>>> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
>>> ---
>>> drivers/bcma/bcma_private.h | 8 ++++
>>> drivers/bcma/driver_chipcommon.c | 48 +++++++++++++++++++++++++++
>>> drivers/bcma/driver_chipcommon_pmu.c | 26 ++++++++++++++
>>> drivers/bcma/driver_mips.c | 1 +
>>> include/linux/bcma/bcma_driver_chipcommon.h | 14 ++++++++
>>> 5 files changed, 97 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
>>> index b97633d..22d3052 100644
>>> --- a/drivers/bcma/bcma_private.h
>>> +++ b/drivers/bcma/bcma_private.h
>>> @@ -29,6 +29,14 @@ void bcma_init_bus(struct bcma_bus *bus);
>>> /* sprom.c */
>>> int bcma_sprom_get(struct bcma_bus *bus);
>>>
>>> +/* driver_chipcommon.c */
>>> +#ifdef CONFIG_BCMA_DRIVER_MIPS
>>> +void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
>>> +#endif /* CONFIG_BCMA_DRIVER_MIPS */
>>> +
>>> +/* driver_chipcommon_pmu.c */
>>> +u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
>>> +
>>> #ifdef CONFIG_BCMA_HOST_PCI
>>> /* host_pci.c */
>>> extern int __init bcma_host_pci_init(void);
>>
>> Not sure, what do you think about this, feel free to comment.
>>
>> My idea was to use bcma_private.h for bcma-internal functions. For
>> example, support for PCI host or SoC host, is something "internal" (as
>> I call it) for bcma. Drivers in theory could be separated modules and
>> I use include/linux/bcma/driver_*.h for them.
>>
>> If following this schema, declarations of
>> bcma_pmu_alp_clock
>> bcma_host_pci_init
>> should be in include/linux/bcma/bcma_driver_chipcommon.h
>
> Same goes to the
> bcma_pmu_get_clockcpu
> from patch 07/11.
>
> Sorry for late-noticing this.
>
> I don't have more comments against your patch set :) Hope John will
> take it soon :)
>
This sounds good. I will send a new patch moving the method declaration
to bcma_driver_chipcommon.h for these 3 functions.
Hauke
^ permalink raw reply [flat|nested] 26+ messages in thread
end of thread, other threads:[~2011-08-10 7:14 UTC | newest]
Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-07-22 23:20 [PATCH v3 00/11] bcma: add support for embedded devices like bcm4716 Hauke Mehrtens
2011-07-22 23:20 ` Hauke Mehrtens
2011-07-22 23:20 ` [PATCH 01/11] bcma: move parsing of EEPROM into own function Hauke Mehrtens
2011-07-22 23:20 ` Hauke Mehrtens
2011-07-22 23:20 ` [PATCH 02/11] bcma: move initializing of struct bcma_bus to " Hauke Mehrtens
2011-07-22 23:20 ` Hauke Mehrtens
2011-07-22 23:20 ` [PATCH 03/11] bcma: add functions to scan cores needed on SoCs Hauke Mehrtens
2011-07-22 23:20 ` Hauke Mehrtens
2011-07-22 23:20 ` [PATCH 04/11] bcma: add SOC bus Hauke Mehrtens
2011-07-22 23:20 ` Hauke Mehrtens
2011-07-22 23:20 ` [PATCH 05/11] bcma: add mips driver Hauke Mehrtens
2011-07-22 23:20 ` [PATCH 06/11] bcma: add serial console support Hauke Mehrtens
2011-07-29 21:04 ` Rafał Miłecki
2011-07-29 21:04 ` Rafał Miłecki
2011-07-29 21:06 ` Rafał Miłecki
2011-07-29 21:06 ` Rafał Miłecki
2011-08-10 7:14 ` Hauke Mehrtens
2011-08-10 7:14 ` Hauke Mehrtens
2011-07-22 23:20 ` [PATCH 07/11] bcma: get CPU clock Hauke Mehrtens
2011-07-22 23:20 ` [PATCH 08/11] bcm47xx: prepare to support different buses Hauke Mehrtens
2011-07-22 23:20 ` [PATCH 09/11] bcm47xx: make it possible to build bcm47xx without ssb Hauke Mehrtens
2011-07-22 23:20 ` [PATCH 10/11] bcm47xx: add support for bcma bus Hauke Mehrtens
2011-07-22 23:20 ` [PATCH 11/11] bcm47xx: fix irq assignment for new SoCs Hauke Mehrtens
2011-07-25 18:42 ` [PATCH v3 00/11] bcma: add support for embedded devices like bcm4716 John W. Linville
2011-07-25 18:42 ` John W. Linville
2011-07-27 20:06 ` Ralf Baechle
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.