* with kernel's option 'nosmp', dom0 does not init LSI Logic / Symbios Logic SAS1064ET
@ 2011-08-16 8:27 Константин Алексеев
2011-08-17 2:14 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 6+ messages in thread
From: Константин Алексеев @ 2011-08-16 8:27 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1: Type: text/plain, Size: 5169 bytes --]
Xen 4.1.1, Kernel 3.0, Debian Weezy.
LSI Logic / Symbios Logic SAS1064ET does not initialized, if boot dom0
with kernel's option 'nosmp'.
Under native it does not happen.
With Squeezy i have the same bug.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=637308
(XEN) Xen version 4.1.1 (Debian 4.1.1-2) (waldi@debian.org) (gcc)
...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-1-amd64 (Debian 3.0.0-1)
(ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-4) ) #1 SMP Sun
Jul 24 02:24:44 UTC 2011
[ 0.000000] Command line: placeholder
root=/dev/mapper/mpath-system-part1 ro console=tty0 console=hvc0 nosmp
...
[ 0.131396] PCI: Probing PCI hardware
[ 0.140008] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.140008] pci 0000:00:02.0: PCI bridge to [bus 01-06]
[ 0.143634] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.145017] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.148008] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.148008] pci 0000:01:00.0: PCI bridge to [bus 02-05]
[ 0.148008] pci 0000:02:00.0: PCI bridge to [bus 03-03]
[ 0.152008] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.152008] pci 0000:02:01.0: PCI bridge to [bus 04-04]
[ 0.161156] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.161477] pci 0000:02:02.0: PCI bridge to [bus 05-05]
[ 0.164009] pci 0000:01:00.3: PCI bridge to [bus 06-06]
[ 0.164009] pci 0000:00:03.0: PCI bridge to [bus 07-07]
[ 0.164408] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.164428] pci 0000:00:04.0: PCI bridge to [bus 08-08]
[ 0.164505] pci 0000:00:05.0: PCI bridge to [bus 09-09]
[ 0.164581] pci 0000:00:06.0: PCI bridge to [bus 0a-0a]
[ 0.164657] pci 0000:00:07.0: PCI bridge to [bus 0b-0b]
[ 0.164948] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
[ 0.166126] vgaarb: device added:
PCI:0000:0c:0c.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.168009] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2670]
[ 0.168015] pci 0000:00:00.0: found PCI INT A -> IRQ 10
[ 0.168026] pci 0000:00:00.0: sharing IRQ 10 with 0000:00:02.0
[ 0.168033] pci 0000:00:00.0: sharing IRQ 10 with 0000:00:03.0
[ 0.168041] pci 0000:00:00.0: sharing IRQ 10 with 0000:00:04.0
[ 0.168050] pci 0000:00:00.0: sharing IRQ 10 with 0000:00:05.0
[ 0.168058] pci 0000:00:00.0: sharing IRQ 10 with 0000:00:06.0
[ 0.168067] pci 0000:00:00.0: sharing IRQ 10 with 0000:00:07.0
[ 0.168457] pci 0000:00:00.0: sharing IRQ 10 with 0000:08:00.0
[ 0.169859] Switching to clocksource xen
[ 0.171492] pnp: PnP ACPI: disabled
[ 0.171492] Switched to NOHz mode on CPU #0
[ 0.175024] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.175044] pci 0000:04:00.0: no compatible bridge window for [mem
0xffe00000-0xffffffff pref]
[ 0.175052] pci 0000:08:00.0: no compatible bridge window for [mem
0xfffe0000-0xffffffff pref]
[ 0.175059] pci 0000:08:00.1: no compatible bridge window for [mem
0xfffe0000-0xffffffff pref]
[ 0.176054] pci 0000:00:02.0: BAR 15: assigned [mem
0xb8e00000-0xb8ffffff pref]
[ 0.176054] pci 0000:00:04.0: BAR 15: assigned [mem
0xb9000000-0xb90fffff pref]
[ 0.176054] pci 0000:01:00.0: BAR 15: assigned [mem
0xb8e00000-0xb8ffffff pref]
[ 0.176054] pci 0000:02:01.0: BAR 15: assigned [mem
0xb8e00000-0xb8ffffff pref]
[ 0.176054] pci 0000:02:00.0: BAR 14: can't assign mem (size 0x200000)
[ 0.176054] pci 0000:02:00.0: BAR 15: can't assign mem pref (size 0x200000)
[ 0.176054] pci 0000:02:00.0: BAR 13: can't assign io (size 0x1000)
[ 0.176054] pci 0000:02:00.0: PCI bridge to [bus 03-03]
[ 0.176054] pci 0000:02:00.0: bridge window [io disabled]
[ 0.176054] pci 0000:02:00.0: bridge window [mem disabled]
[ 0.176054] pci 0000:02:00.0: bridge window [mem pref disabled]
[ 0.176054] pci 0000:04:00.0: BAR 6: assigned [mem
0xb8e00000-0xb8ffffff pref]
[ 0.176054] pci 0000:02:01.0: PCI bridge to [bus 04-04]
[ 0.176054] pci 0000:02:01.0: bridge window [io 0x4000-0x4fff]
[ 0.176054] pci 0000:02:01.0: bridge window [mem 0xb8900000-0xb89fffff]
[ 0.176054] pci 0000:02:01.0: bridge window [mem
0xb8e00000-0xb8ffffff pref]
[ 0.176054] pci 0000:02:02.0: PCI bridge to [bus 05-05]
[ 0.176054] pci 0000done.
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/mapper/mpath-system-part1 does not exist. Dropping to a shell!
(initramfs) ls /dev/mapper/
control
(initramfs) ls /dev/sd*
ls: /dev/sd*: No such file or directory
(initramfs)
--
Konstantin
[-- Attachment #2: lspci --]
[-- Type: application/octet-stream, Size: 51657 bytes --]
00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1)
Subsystem: Intel Corporation Device 346f
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 0
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
Address: fee00000 Data: 0000
Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt+ RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol+
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: b8000000-b8afffff
Prefetchable memory behind bridge: 00000000b8e00000-00000000b8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
Address: fee00000 Data: 0000
Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt+ RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport
00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
Address: fee00000 Data: 0000
Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport
00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 4 (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: b8c00000-b8cfffff
Prefetchable memory behind bridge: 00000000b9000000-00000000b90fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
Address: fee00000 Data: 0000
Capabilities: [6c] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #6, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt+ RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport
00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
Address: fee00000 Data: 0000
Capabilities: [6c] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #6, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport
00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 6 (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
Address: fee00000 Data: 0000
Capabilities: [6c] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #6, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #6, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport
00:07.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
Address: fee00000 Data: 0000
Capabilities: [6c] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #7, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #6, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport
00:08.0 System peripheral: Intel Corporation 5000 Series Chipset DMA Engine (rev b1)
Subsystem: Intel Corporation Device 346f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 68
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4159
Capabilities: [6c] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: ioatdma
00:10.0 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
Subsystem: Intel Corporation Device 346f
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: i5000_edac
00:10.1 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
Subsystem: Intel Corporation Device 346f
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.2 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
Subsystem: Intel Corporation Device 346f
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
Subsystem: Intel Corporation Device 346f
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
Subsystem: Intel Corporation Device 346f
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
Subsystem: Intel Corporation Device 346f
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
Subsystem: Intel Corporation Device 346f
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 346f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 5080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 346f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 5060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 346f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 5040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 (rev 09) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 346f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at 5020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device 346f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at b8d00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: b8b00000-b8bfffff
Prefetchable memory behind bridge: 00000000b0000000-00000000b7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
Capabilities: [50] Subsystem: Intel Corporation Device 346f
00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09)
Subsystem: Intel Corporation Device 346f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 09)
Subsystem: Intel Corporation Device 346f
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 5000 [size=32]
Kernel driver in use: i801_smbus
01:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=01, secondary=02, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: b8000000-b89fffff
Prefetchable memory behind bridge: 00000000b8e00000-00000000b8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] Express (v1) Upstream Port, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-SlotPowerLimit 0.000W
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Subsystem: Intel Corporation Device 346f
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport
01:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=01, secondary=06, subordinate=06, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Subsystem: Intel Corporation Device 346f
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
Status: Dev=00:00.3 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP+ FCP+ CmpltTO+ CmpltAbrt+ UnxCmplt+ RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
02:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] Express (v1) Downstream Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surprise-
Slot #2, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn+ PowerFlt+ MRL+ CmdCplt+ PresDet+ Interlock-
Changed: MRL+ PresDet+ LinkState-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Subsystem: Intel Corporation Device 346f
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport
02:01.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: b8900000-b89fffff
Prefetchable memory behind bridge: 00000000b8e00000-00000000b8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] Express (v1) Downstream Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Subsystem: Intel Corporation Device 346f
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport
02:02.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: b8000000-b88fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] Express (v1) Downstream Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Subsystem: Intel Corporation Device 346f
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport
04:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04)
Subsystem: Intel Corporation Device 346f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 4000 [size=256]
Region 1: Memory at b8910000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at b8900000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at b8e00000 [disabled] [size=2M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [98] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [b0] MSI-X: Enable- Count=1 Masked-
Vector table: BAR=1 offset=00002000
PBA: BAR=1 offset=00003000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Kernel driver in use: mptsas
05:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Serdes) (rev 01)
Subsystem: Intel Corporation Device 346f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 64
Region 0: Memory at b8820000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at b8400000 (32-bit, non-prefetchable) [size=4M]
Region 2: I/O ports at 3020 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4169
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM unknown, Latency L0 <128ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-aa-df-00
Kernel driver in use: e1000e
05:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Serdes) (rev 01)
Subsystem: Intel Corporation Device 346f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 65
Region 0: Memory at b8800000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at b8000000 (32-bit, non-prefetchable) [size=4M]
Region 2: I/O ports at 3000 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4141
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM unknown, Latency L0 <128ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-aa-df-00
Kernel driver in use: e1000e
08:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
Subsystem: Intel Corporation Device 346f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 66
Region 0: Memory at b8c60000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at b8c40000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 2020 [size=32]
Expansion ROM at b9000000 [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4149
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-77-0d-38
Kernel driver in use: e1000e
08:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
Subsystem: Intel Corporation Device 346f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 67
Region 0: Memory at b8c20000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at b8c00000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 2000 [size=32]
Expansion ROM at b9020000 [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4151
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-77-0d-38
Kernel driver in use: e1000e
0c:0c.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device 346f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at b0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 1000 [size=256]
Region 2: Memory at b8b00000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at b8b20000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: radeon
[-- Attachment #3: console --]
[-- Type: application/octet-stream, Size: 18760 bytes --]
Loading Xen 4.1-amd64 ...
Loading Linux 3.0.0-1-amd64 ...
Loading initial ramdisk ...
error: can't get mode info.
(XEN) Xen version 4.1.1 (Debian 4.1.1-2) (waldi@debian.org) (gcc)
(XEN) 000000009fb37000 - 000000009fc00000 (usable)
(XEN) 000000009fc00000 - 00000000b0000000 (reserved)
(XEN) 00000000ffc00000 - 00000000ffc0c000 (reserved)
(XEN) 0000000100000000 - 0000000360000000 (usable)
(XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL )
(XEN) ACPI: XSDT 9FB36120, 009C (r1 INTEL SB5000SI 0 INT 1 INTL 1)
(XEN) ACPI: BERT 9FB22000, 0030 (r1 INTEL SB5000SI 1 INTL 1)
(XEN) ACPI: ERST 9FB21000, 0230 (r1 INTEL SB5000SI 1 INTL 1)
(XEN) ACPI: EINJ 9FB20000, 0130 (r1 INTEL SB5000SI 1 INTL 1)
(XEN) System RAM: 12282MB (12576792kB)
(XEN) Domain heap initialised
(XEN) Processor #0 7:7 APIC version 20
(XEN) Processor #2 7:7 APIC version 20
(XEN) Processor #4 7:7 APIC version 20
(XEN) Processor #6 7:7 APIC version 20
(XEN) Processor #1 7:7 APIC version 20
(XEN) Processor #3 7:7 APIC version 20
(XEN) Processor #5 7:7 APIC version 20
(XEN) Processor #7 7:7 APIC version 20
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2992.589 MHz processor.
(XEN) Initing memory sharing.
(XEN) I/O virtualisation disabled
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) Platform timer is 14.318MHz HPET
�(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) Brought up 8 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x192e000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000350000000->0000000354000000 (3052078 pages to be allocated)
(XEN) Init. ramdisk: 000000035e3cd000->000000035ffff800
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff8192e000
(XEN) Init. ramdisk: ffffffff8192e000->ffffffff83560800
(XEN) Phys-Mach map: ffffffff83561000->ffffffff84cd8308
(XEN) Start info: ffffffff84cd9000->ffffffff84cd94b4
(XEN) Page tables: ffffffff84cda000->ffffffff84d05000
(XEN) Boot stack: ffffffff84d05000->ffffffff84d06000
(XEN) TOTAL: ffffffff80000000->ffffffff85000000
(XEN) ENTRY ADDRESS: ffffffff816a0200
(XEN) Dom0 has maximum 8 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 224kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-1-amd64 (Debian 3.0.0-1) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-4) ) #1 SMP Sun Jul 24 02:24:44 UTC 2011
[ 0.000000] Command line: placeholder root=/dev/mapper/mpath-system-part1 ro console=tty0 console=hvc0 nosmp
[ 0.000000] xen_release_chunk: looking at area pfn b0000-fec00: 322560 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn fec01-fec80: 127 pages freed
[ 000009fb20000 (usable)
[ 0.000000] Xen: 000000009fb20000 - 000000009fb37000 (ACPI data)
[ 0.000000] Xen: 000000009fb37000 - 000000009fc00000 (usable)
[ 0.000000] Xen: 000000009fc00000 - 00000000b0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] Xen: 00000000fec80000 - 00000000fec81000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ffc00000 - 00000000ffc0c000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 00000003afff1000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3afff1 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0x9fc00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fdd60] fdd60
[ 0.000000] init_memory_mapping: 0000000000000000-000000009fc00000
[ 0.000000] init_memory_mapping: 0000000100000000-00000003afff1000
[ 0.000000] RAMDISK: 0192e000 - 03561000
[ 0.000000] ACPI: RSDP 00000000000f03c0 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 000000009fb36120 0009C (v01 INTEL SB5000SI 00000000 INTL 01000013)
[ 0.000000] ACPI: SLIC 000000009fb35000 00176 (v01 INTEL SB5000SI 00000002 INTL 01000013)
[ 0.000000] ACPI: FACP 000000009fb33000 000F4 (v03 INTEL SB5000SI 00000000 INTL 01000013)
[ 0.000000] ACPI: DSDT 000000009fb2c000 058AC (v02 INTEL SB5000SI 00000008 INTL 01000013)
[ 0.000000] ACPI: FACS 000000009fa98000 00040
[ 0.000000] ACPI: APIC 000000009fb32000 000C8 (v01 INTEL SB5000SI 00000000 INTL 01000013)
[ 0.000000] ACPI: SPCR 000000009fb2b000 00050 (v01 INTEL SB5000SI 00000000 INTL 01000013)
[ 0.000000] ACPI: DBGP 000000009fb2a000 00034 (v01 INTEL SB5000SI 00000000 INTL 01000013)
[ 0.000000] ACPI: HPET 000000009fb29000 00038 (v01 INTEL SB5000SI 00000001 INTL 01000013)
[ 0.000000] ACPI: MCFG 000000009fb28000 0003C (v01 INTEL SB5000SI 00000001 INTL 01000013)
[ 0.000000] ACPI: SSDT 000000009fb27000 00A14 (v02 INTEL EIST 00004000 INTL 20060317)
[ 0.000000] ACPI: SSDT 000000009fb26000 00193 (v02 INTEL IPMI 00004000 INTL 20060317)
[ 0.000000] ACPI: SSDT 000000009fb25000 000CE (v02 INTEL CST 00004000 INTL 20060317)
[ 0.000000] ACPI: TCPA 000000009fb24000 00032 (v00 00000000 00000000)
[ 0.000000] ACPI: HEST 000000009fb23000 000A8 (v01 INTEL SB5000SI 00000001 INTL 00000001)
[ 0.000000] ACPI: BERT 000000009fb22000 00030 (v01 INTEL SB5000SI 00000001 INTL 00000001)
[ 0.000000] ACPI: ERST 000000009fb21000 00230 (v01 INTEL SB5000SI 00000001 INTL 00000001)
[ 0.000000] ACPI: EINJ 000000009fb20000 00130 (v01 INTEL SB5000SI 00000001 INTL 00000001)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000003afff1000
[ 0.000000] Initmem setup node 0 0000000000000000-00000003afff1000
[ 0.000000] NODE_DATA [00000002eee5c000 - 00000002eee60fff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x003afff1
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0009f936
[ 0.000000] 0: 0x0009f9cc -> 0x0009fa2b
[ 0.000000] 0: 0x0009fa97 -> 0x0009fa98
[ 0.000000] 0: 0x0009fb17 -> 0x0009fb20
[ 0.000000] 0: 0x0009fb37 -> 0x0009fc00
[ 0.000000] 0: 0x00100000 -> 0x003afff1
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: INTEL
[ 0.000000] MPTABLE: Product ID: SB5000SI
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] IOAPIC[0]: apic_id 8, version 255, address 0xfec00000, GSI 0-255
[ 0.000000] IOAPIC[1]: apic_id 9, version 255, address 0xfec80000, GSI 256-511
[ 0.000000] Processors: 8
[ 0.000000] 8 Processors exceeds max_cpus limit of 0
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009f936000 - 000000009f9cc000
[ 0.000000] PM: Registered nosave memory: 000000009fa2b000 - 000000009fa97000
[ 0.000000] PM: Registered nosave memory: 000000009fa98000 - 000000009fb17000
[ 0.000000] PM: Registered nosave memory: 000000009fb20000 - 000000009fb37000
[ 0.000000] PM: Registered nosave memory: 000000009fc00000 - 00000000b0000000
[ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec80000
[ 0.000000] PM: Registered nosave memory: 00000000fec80000 - 00000000fec81000
[ 0.000000] PM: Registered nosave memory: 00000000fec81000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc0c000
[ 0.000000] PM: Registered nosave memory: 00000000ffc0c000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:4ec00000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.1.1 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8802eedf1000 s78912 r8192 d23488 u110592
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3418978
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: placeholder root=/dev/mapper/mpath-system-part1 ro console=tty0 console=hvc0 nosmp
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Placing 64MB software IO TLB between ffff8802db800000 - ffff8802df800000
[ 0.000000] software IO TLB at phys 0x2db800000 - 0x2df800000
[ 0.000000] Memory: 10378480k/15466436k available (3324k kernel code, 1579048k absent, 3508908k reserved, 3371k data, 560k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 2992.588 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.17 BogoMIPS (lpj=11970352)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004448] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.013280] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.016657] Mount-cache hash table entries: 256
[ 0.016834] Initializing cgroup subsys cpuacct
[ 0.016842] Initializing cgroup subsys memory
[ 0.016865] Initializing cgroup subsys devices
[ 0.016874] Initializing cgroup subsys freezer
[ 0.016878] Initializing cgroup subsys net_cls
[ 0.016883] Initializing cgroup subsys blkio
[ 0.016957] CPU: Physical Processor ID: 0
[ 0.016961] CPU: Processor Core ID: 0
[ 0.016995] SMP alternatives: switching to UP code
[ 0.020009] Freeing SMP alternatives: 8k freed
[ 0.020017] ACPI: Core revision 20110413
[ 0.029358] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.032108] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only.
[ 0.032287] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.032309] Brought up 1 CPUs
[ 0.032435] devtmpfs: initialized
[ 0.035449] PM: Registering ACPI NVS region at 9f936000 (614400 bytes)
[ 0.035488] PM: Registering ACPI NVS region at 9fa98000 (520192 bytes)
[ 0.035605] Grant table initialized
[ 0.035664] print_constraints: dummy:
[ 0.035728] NET: Registered protocol family 16
[ 0.035892] ACPI: bus type pci registered
[ 0.035991] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xa0000000-0xafffffff] (base 0xa0000000)
[ 0.035999] PCI: MMCONFIG at [mem 0xa0000000-0xafffffff] reserved in E820
[ 0.106405] PCI: Using configuration type 1 for base access
[ 0.107236] bio: create slab <bio-0> at 0
[ 0.108781] ACPI: SCI (IRQ9) allocation failed
[ 0.108786] ACPI Exception: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20110413/evevent-119)
[ 0.108796] ACPI: Unable to start the ACPI Interpreter
[ 0.112283] xen/balloon: Initialising balloon driver.
[ 0.112289] last_pfn = 0x3afff1 max_arch_pfn = 0x400000000
[ 0.131247] xen-balloon: Initialising balloon driver.
[ 0.131351] vgaarb: loaded
[ 0.131396] PCI: Probing PCI hardware
[ 0.140008] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.140008] pci 0000:00:02.0: PCI bridge to [bus 01-06]
[ 0.143634] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.145017] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.148008] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.148008] pci 0000:01:00.0: PCI bridge to [bus 02-05]
[ 0.148008] pci 0000:02:00.0: PCI bridge to [bus 03-03]
[ 0.152008] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.152008] pci 0000:02:01.0: PCI bridge to [bus 04-04]
[ 0.161156] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.161477] pci 0000:02:02.0: PCI bridge to [bus 05-05]
[ 0.164009] pci 0000:01:00.3: PCI bridge to [bus 06-06]
[ 0.164009] pci 0000:00:03.0: PCI bridge to [bus 07-07]
[ 0.164408] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.164428] pci 0000:00:04.0: PCI bridge to [bus 08-08]
[ 0.164505] pci 0000:00:05.0: PCI bridge to [bus 09-09]
[ 0.164581] pci 0000:00:06.0: PCI bridge to [bus 0a-0a]
[ 0.164657] pci 0000:00:07.0: PCI bridge to [bus 0b-0b]
[ 0.164948] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
[ 0.166126] vgaarb: device added: PCI:0000:0c:0c.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.168009] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2670]
[ 0.168015] pci 0000:00:00.0: found PCI INT A -> IRQ 10
[ 0.168026] pci 0000:00:00.0: sharing IRQ 10 with 0000:00:02.0
[ 0.168033] pci 0000:00:00.0: sharing IRQ 10 with 0000:00:03.0
[ 0.168041] pci 0000:00:00.0: sharing IRQ 10 with 0000:00:04.0
[ 0.168050] pci 0000:00:00.0: sharing IRQ 10 with 0000:00:05.0
[ 0.168058] pci 0000:00:00.0: sharing IRQ 10 with 0000:00:06.0
[ 0.168067] pci 0000:00:00.0: sharing IRQ 10 with 0000:00:07.0
[ 0.168457] pci 0000:00:00.0: sharing IRQ 10 with 0000:08:00.0
[ 0.169859] Switching to clocksource xen
[ 0.171492] pnp: PnP ACPI: disabled
[ 0.171492] Switched to NOHz mode on CPU #0
[ 0.175024] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.175044] pci 0000:04:00.0: no compatible bridge window for [mem 0xffe00000-0xffffffff pref]
[ 0.175052] pci 0000:08:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.175059] pci 0000:08:00.1: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.176054] pci 0000:00:02.0: BAR 15: assigned [mem 0xb8e00000-0xb8ffffff pref]
[ 0.176054] pci 0000:00:04.0: BAR 15: assigned [mem 0xb9000000-0xb90fffff pref]
[ 0.176054] pci 0000:01:00.0: BAR 15: assigned [mem 0xb8e00000-0xb8ffffff pref]
[ 0.176054] pci 0000:02:01.0: BAR 15: assigned [mem 0xb8e00000-0xb8ffffff pref]
[ 0.176054] pci 0000:02:00.0: BAR 14: can't assign mem (size 0x200000)
[ 0.176054] pci 0000:02:00.0: BAR 15: can't assign mem pref (size 0x200000)
[ 0.176054] pci 0000:02:00.0: BAR 13: can't assign io (size 0x1000)
[ 0.176054] pci 0000:02:00.0: PCI bridge to [bus 03-03]
[ 0.176054] pci 0000:02:00.0: bridge window [io disabled]
[ 0.176054] pci 0000:02:00.0: bridge window [mem disabled]
[ 0.176054] pci 0000:02:00.0: bridge window [mem pref disabled]
[ 0.176054] pci 0000:04:00.0: BAR 6: assigned [mem 0xb8e00000-0xb8ffffff pref]
[ 0.176054] pci 0000:02:01.0: PCI bridge to [bus 04-04]
[ 0.176054] pci 0000:02:01.0: bridge window [io 0x4000-0x4fff]
[ 0.176054] pci 0000:02:01.0: bridge window [mem 0xb8900000-0xb89fffff]
[ 0.176054] pci 0000:02:01.0: bridge window [mem 0xb8e00000-0xb8ffffff pref]
[ 0.176054] pci 0000:02:02.0: PCI bridge to [bus 05-05]
[ 0.176054] pci 0000done.
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/mapper/mpath-system-part1 does not exist. Dropping to a shell!
BusyBox v1.18.5 (Debian 1:1.18.5-1) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs)
(initramfs) ls /dev/mapper/
control
(initramfs) ls /dev/sd*
ls: /dev/sd*: No such file or directory
(initramfs)
[-- Attachment #4: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: with kernel's option 'nosmp', dom0 does not init LSI Logic / Symbios Logic SAS1064ET
2011-08-16 8:27 with kernel's option 'nosmp', dom0 does not init LSI Logic / Symbios Logic SAS1064ET Константин Алексеев
@ 2011-08-17 2:14 ` Konrad Rzeszutek Wilk
2011-08-17 5:28 ` Константин Алексеев
[not found] ` <CAMb_DiRz4ZTdBNH5br0icKqEk9MDURuOhpdJbdS4YxS2mkgVUg@mail.gmail.com>
0 siblings, 2 replies; 6+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-08-17 2:14 UTC (permalink / raw)
To: Константин
Алексеев
Cc: xen-devel
On Tue, Aug 16, 2011 at 12:27:44PM +0400, Константин Алексеев wrote:
> Xen 4.1.1, Kernel 3.0, Debian Weezy.
> LSI Logic / Symbios Logic SAS1064ET does not initialized, if boot dom0
> with kernel's option 'nosmp'.
But it does initialize if you don't use nosmp?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: with kernel's option 'nosmp', dom0 does not init LSI Logic / Symbios Logic SAS1064ET
2011-08-17 2:14 ` Konrad Rzeszutek Wilk
@ 2011-08-17 5:28 ` Константин Алексеев
[not found] ` <CAMb_DiRz4ZTdBNH5br0icKqEk9MDURuOhpdJbdS4YxS2mkgVUg@mail.gmail.com>
1 sibling, 0 replies; 6+ messages in thread
From: Константин Алексеев @ 2011-08-17 5:28 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
2011/8/17 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>:
> On Tue, Aug 16, 2011 at 12:27:44PM +0400, Константин Алексеев wrote:
>> Xen 4.1.1, Kernel 3.0, Debian Weezy.
>> LSI Logic / Symbios Logic SAS1064ET does not initialized, if boot dom0
>> with kernel's option 'nosmp'.
>
> But it does initialize if you don't use nosmp?
>
Yes, if don't use nosmp with dom0 it does initialize.
--
Konstantin
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: with kernel's option 'nosmp', dom0 does not init LSI Logic / Symbios Logic SAS1064ET
[not found] ` <CAMb_DiRz4ZTdBNH5br0icKqEk9MDURuOhpdJbdS4YxS2mkgVUg@mail.gmail.com>
@ 2011-08-17 5:29 ` Konrad Rzeszutek Wilk
2011-08-17 6:16 ` Константин Алексеев
0 siblings, 1 reply; 6+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-08-17 5:29 UTC (permalink / raw)
To: Константин
Алексеев
Cc: xen-devel
On Wed, Aug 17, 2011 at 09:13:01AM +0400, Константин Алексеев wrote:
> 2011/8/17 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>:
> > On Tue, Aug 16, 2011 at 12:27:44PM +0400, Константин Алексеев wrote:
> >> Xen 4.1.1, Kernel 3.0, Debian Weezy.
> >> LSI Logic / Symbios Logic SAS1064ET does not initialized, if boot dom0
> >> with kernel's option 'nosmp'.
> >
> > But it does initialize if you don't use nosmp?
> >
>
> Yes, if don't use nosmp with dom0 it does initialize.
Please do ever remove the xen-devel from the email exchange.
Did you follow also the suggestions in the bugzilla from Ian (about dom0_..) ?
Did that fix the issue?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: with kernel's option 'nosmp', dom0 does not init LSI Logic / Symbios Logic SAS1064ET
2011-08-17 5:29 ` Konrad Rzeszutek Wilk
@ 2011-08-17 6:16 ` Константин Алексеев
2011-08-17 6:53 ` Keir Fraser
0 siblings, 1 reply; 6+ messages in thread
From: Константин Алексеев @ 2011-08-17 6:16 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
2011/8/17 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>:
> Did you follow also the suggestions in the bugzilla from Ian (about dom0_..) ?
> Did that fix the issue?
If you mean suggestions from Ian in debian bug report, then yes,
I use dom0_max_vcpus=1 and everything works well.
Ian asked to test this bug with the latest kernel and report it.
That's what I'm doing
--
Konstantin
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: with kernel's option 'nosmp', dom0 does not init LSI Logic / Symbios Logic SAS1064ET
2011-08-17 6:16 ` Константин Алексеев
@ 2011-08-17 6:53 ` Keir Fraser
0 siblings, 0 replies; 6+ messages in thread
From: Keir Fraser @ 2011-08-17 6:53 UTC (permalink / raw)
To: Константин
Алексеев,
Konrad Rzeszutek Wilk
Cc: xen-devel
On 17/08/2011 07:16, "Константин Алексеев" <kv.alekseev@gmail.com> wrote:
> 2011/8/17 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>:
>> Did you follow also the suggestions in the bugzilla from Ian (about dom0_..)
>> ?
>> Did that fix the issue?
>
> If you mean suggestions from Ian in debian bug report, then yes,
> I use dom0_max_vcpus=1 and everything works well.
> Ian asked to test this bug with the latest kernel and report it.
> That's what I'm doing
It's really an unsupported configuration. If you want to limit dom0 vcpus
then dom0_max_vcpus= on Xen command line is the correct way. Specifying
nosmp causes the machine to boot up in a legacy configuration which we do
not test, and is likely to cause mismatches in expectations between dom0 and
Xen. There's no good reason to specify it for general use.
-- Keir
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-08-17 6:53 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-16 8:27 with kernel's option 'nosmp', dom0 does not init LSI Logic / Symbios Logic SAS1064ET Константин Алексеев
2011-08-17 2:14 ` Konrad Rzeszutek Wilk
2011-08-17 5:28 ` Константин Алексеев
[not found] ` <CAMb_DiRz4ZTdBNH5br0icKqEk9MDURuOhpdJbdS4YxS2mkgVUg@mail.gmail.com>
2011-08-17 5:29 ` Konrad Rzeszutek Wilk
2011-08-17 6:16 ` Константин Алексеев
2011-08-17 6:53 ` Keir Fraser
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.