* Re: bug report: Sun Blade 100 kernel panics during boot under 3.0.3
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
@ 2011-08-23 0:36 ` David Miller
2011-08-24 19:50 ` Jim Faulkner
` (15 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: David Miller @ 2011-08-23 0:36 UTC (permalink / raw)
To: sparclinux
From: Jim Faulkner <jfaulkne@ccs.neu.edu>
Date: Mon, 22 Aug 2011 19:38:39 -0400
> Hi,
>
> My Sun Blade 100 hangs when I boot any recent kernel. I've tried many
> Debian and Gentoo installation CDs, but every CD made since 2008 or so
> prints "console [tty0] enabled, bootconsole disabled" and hangs. I have
> to use Gentoo's 2007.0 install CD to in order to complete booting and
> not disable the bootconsole.
>
> I've built Linux 3.0.3 and tried it with the same results. When I boot
> with the "keep_bootcon" kernel parameter I see that Linux is kernel
> panicking in pci_scan_one_pbm.
>
> I've attached photos of the full kernel panic along with my .config to
> this bugzilla report:
>
> https://bugzilla.kernel.org/show_bug.cgi?idA522
>
> Please let me know if you'd like any further information from me.
Unfortunately we need the very first crash message that happens, but
even your first snapshot is after other crashes have occurred.
You'll need to build a kernel with CONFIG_BOOT_PRINTK_DELAYED enabled
and then you can boot with boot_delay=xxx (where "xxx" is something
like 100, it's in milliseconds) to slow down the message printing so
that you can capture the first message cleanly.
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: bug report: Sun Blade 100 kernel panics during boot under 3.0.3
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
2011-08-23 0:36 ` David Miller
@ 2011-08-24 19:50 ` Jim Faulkner
2011-08-24 19:53 ` David Miller
` (14 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Jim Faulkner @ 2011-08-24 19:50 UTC (permalink / raw)
To: sparclinux
On Mon, Aug 22, 2011 at 05:36:02PM -0700, David Miller wrote:
> Unfortunately we need the very first crash message that happens, but
> even your first snapshot is after other crashes have occurred.
>
> You'll need to build a kernel with CONFIG_BOOT_PRINTK_DELAYED enabled
> and then you can boot with boot_delay=xxx (where "xxx" is something
> like 100, it's in milliseconds) to slow down the message printing so
> that you can capture the first message cleanly.
OK, I've attached several images of the kernel panic w/ boot_delay to
the bug:
https://bugzilla.kernel.org/show_bug.cgi?idA522
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: bug report: Sun Blade 100 kernel panics during boot under 3.0.3
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
2011-08-23 0:36 ` David Miller
2011-08-24 19:50 ` Jim Faulkner
@ 2011-08-24 19:53 ` David Miller
2011-08-24 21:03 ` Sam Ravnborg
` (13 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: David Miller @ 2011-08-24 19:53 UTC (permalink / raw)
To: sparclinux
From: Jim Faulkner <jfaulkne@ccs.neu.edu>
Date: Wed, 24 Aug 2011 15:50:53 -0400
> On Mon, Aug 22, 2011 at 05:36:02PM -0700, David Miller wrote:
>
>> Unfortunately we need the very first crash message that happens, but
>> even your first snapshot is after other crashes have occurred.
>>
>> You'll need to build a kernel with CONFIG_BOOT_PRINTK_DELAYED enabled
>> and then you can boot with boot_delay=xxx (where "xxx" is something
>> like 100, it's in milliseconds) to slow down the message printing so
>> that you can capture the first message cleanly.
>
> OK, I've attached several images of the kernel panic w/ boot_delay to
> the bug:
>
> https://bugzilla.kernel.org/show_bug.cgi?idA522
Thanks I'll take a look at this soon.
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: bug report: Sun Blade 100 kernel panics during boot under 3.0.3
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
` (2 preceding siblings ...)
2011-08-24 19:53 ` David Miller
@ 2011-08-24 21:03 ` Sam Ravnborg
2011-08-24 23:17 ` David Miller
` (12 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Sam Ravnborg @ 2011-08-24 21:03 UTC (permalink / raw)
To: sparclinux
On Wed, Aug 24, 2011 at 03:50:53PM -0400, Jim Faulkner wrote:
> On Mon, Aug 22, 2011 at 05:36:02PM -0700, David Miller wrote:
>
> > Unfortunately we need the very first crash message that happens, but
> > even your first snapshot is after other crashes have occurred.
> >
> > You'll need to build a kernel with CONFIG_BOOT_PRINTK_DELAYED enabled
> > and then you can boot with boot_delay=xxx (where "xxx" is something
> > like 100, it's in milliseconds) to slow down the message printing so
> > that you can capture the first message cleanly.
>
> OK, I've attached several images of the kernel panic w/ boot_delay to
> the bug:
>
> https://bugzilla.kernel.org/show_bug.cgi?idA522
From image 3 it looks like you hit some issues with the ALI7101.
From your config I can see you have:
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
They both mention ALI7101 in their help text.
Just to give a hint if this is the casue could you try to disable one
or both of these to see if this has any effect.
Sam
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: bug report: Sun Blade 100 kernel panics during boot under 3.0.3
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
` (3 preceding siblings ...)
2011-08-24 21:03 ` Sam Ravnborg
@ 2011-08-24 23:17 ` David Miller
2011-08-25 9:58 ` Josip Rodin
` (11 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: David Miller @ 2011-08-24 23:17 UTC (permalink / raw)
To: sparclinux
From: Sam Ravnborg <sam@ravnborg.org>
Date: Wed, 24 Aug 2011 23:03:24 +0200
>>From your config I can see you have:
> CONFIG_I2C_ALI1535=m
> CONFIG_I2C_ALI1563=m
>
> They both mention ALI7101 in their help text.
>
> Just to give a hint if this is the casue could you try to disable one
> or both of these to see if this has any effect.
Neither of these drivers should ever be enabled on platforms like
sparc64. They do direct I/O space writes by decoding the control
register of the SMBBA chip in PCI config space then directly using
that address for I/O port accesses.
Either these drivers need to be written to be more portable else
they need to have appropriate Kconfig guards.
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: bug report: Sun Blade 100 kernel panics during boot under 3.0.3
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
` (4 preceding siblings ...)
2011-08-24 23:17 ` David Miller
@ 2011-08-25 9:58 ` Josip Rodin
2011-08-25 10:06 ` Josip Rodin
` (10 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Josip Rodin @ 2011-08-25 9:58 UTC (permalink / raw)
To: sparclinux
On Wed, Aug 24, 2011 at 03:50:53PM -0400, Jim Faulkner wrote:
> On Mon, Aug 22, 2011 at 05:36:02PM -0700, David Miller wrote:
>
> > Unfortunately we need the very first crash message that happens, but
> > even your first snapshot is after other crashes have occurred.
> >
> > You'll need to build a kernel with CONFIG_BOOT_PRINTK_DELAYED enabled
> > and then you can boot with boot_delay=xxx (where "xxx" is something
> > like 100, it's in milliseconds) to slow down the message printing so
> > that you can capture the first message cleanly.
>
> OK, I've attached several images of the kernel panic w/ boot_delay to
> the bug:
>
> https://bugzilla.kernel.org/show_bug.cgi?idA522
https://bugzilla.kernel.org/attachment.cgi?idp042 (the third image) looks
like it first finds two address space collisions with ali7101... but they're
both listed at 0000:00:03.0 (i.e. not a collision of two different PCI
devices but one and the same), and that quirk code in drivers/pci/quirks.c
is ancient (2005, 2007).
The next problem is a WARN about 0000:00:07.0 being added twice, but latest
change in that sabre_* function seems to be a generic OF matching code
change, so that's not immediately suspicious either.
It looks as if something is generally screwing with the PCI detection logic
from the get-go.
Do you happen to have a working kernel to fall back to, and then do a
git bisect?
--
2. That which causes joy or happiness.
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: bug report: Sun Blade 100 kernel panics during boot under 3.0.3
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
` (5 preceding siblings ...)
2011-08-25 9:58 ` Josip Rodin
@ 2011-08-25 10:06 ` Josip Rodin
2011-08-25 17:32 ` Jim Faulkner
` (9 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Josip Rodin @ 2011-08-25 10:06 UTC (permalink / raw)
To: sparclinux
On Wed, Aug 24, 2011 at 04:17:11PM -0700, David Miller wrote:
> From: Sam Ravnborg <sam@ravnborg.org>
> Date: Wed, 24 Aug 2011 23:03:24 +0200
>
> >>>From your config I can see you have:
> > CONFIG_I2C_ALI1535=m
> > CONFIG_I2C_ALI1563=m
> >
> > They both mention ALI7101 in their help text.
> >
> > Just to give a hint if this is the casue could you try to disable one
> > or both of these to see if this has any effect.
>
> Neither of these drivers should ever be enabled on platforms like
> sparc64. They do direct I/O space writes by decoding the control
> register of the SMBBA chip in PCI config space then directly using
> that address for I/O port accesses.
>
> Either these drivers need to be written to be more portable else
> they need to have appropriate Kconfig guards.
You mean...
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 646068e..a5d0d7c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -9,7 +9,7 @@ comment "PC SMBus host controller drivers"
config I2C_ALI1535
tristate "ALI 1535"
- depends on PCI
+ depends on PCI && !SPARC
help
If you say yes to this option, support will be included for the SMB
Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB
@@ -21,7 +21,7 @@ config I2C_ALI1535
config I2C_ALI1563
tristate "ALI 1563"
- depends on PCI && EXPERIMENTAL
+ depends on PCI && !SPARC && EXPERIMENTAL
help
If you say yes to this option, support will be included for the SMB
Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB
...?
They're all under "PC (sic) SMBus host controller drivers" so maybe
the entire menu should be preventively killed under SPARC?
OTOH the Debian .32 config (from 'stable') includes one of them -
CONFIG_I2C_ISCH=m.
--
2. That which causes joy or happiness.
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: bug report: Sun Blade 100 kernel panics during boot under 3.0.3
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
` (6 preceding siblings ...)
2011-08-25 10:06 ` Josip Rodin
@ 2011-08-25 17:32 ` Jim Faulkner
2011-08-25 17:48 ` Jim Faulkner
` (8 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Jim Faulkner @ 2011-08-25 17:32 UTC (permalink / raw)
To: sparclinux
On Wed, Aug 24, 2011 at 11:03:24PM +0200, Sam Ravnborg wrote:
> From image 3 it looks like you hit some issues with the ALI7101.
>
> From your config I can see you have:
> CONFIG_I2C_ALI1535=m
> CONFIG_I2C_ALI1563=m
>
> They both mention ALI7101 in their help text.
>
> Just to give a hint if this is the casue could you try to disable one
> or both of these to see if this has any effect.
OK, I've disabled both options and attached my updated .config to
bugzilla.
Unfortunately I'm seeing the same results when booting. The kernel
panics look exactly the same (referencing the ali7101), so I didn't
bother taking more photos.
I'm not really surprised by this result, since ALI1535 and ALI1563 were
configured as modules, and I'm getting the kernel panic before any
modules can be loaded (I'm not using an initrd).
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: bug report: Sun Blade 100 kernel panics during boot under 3.0.3
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
` (7 preceding siblings ...)
2011-08-25 17:32 ` Jim Faulkner
@ 2011-08-25 17:48 ` Jim Faulkner
2011-08-25 18:28 ` Josip Rodin
` (7 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Jim Faulkner @ 2011-08-25 17:48 UTC (permalink / raw)
To: sparclinux
On Thu, Aug 25, 2011 at 11:58:22AM +0200, Josip Rodin wrote:
>
> It looks as if something is generally screwing with the PCI detection logic
> from the get-go.
>
> Do you happen to have a working kernel to fall back to, and then do a
> git bisect?
Yes I agree that there's something screwy in the detection logic. I get
a "console [tty0] enabled, bootconsole disabled" when I don't use the
keep_bootcon kernel parameter, even though I have the
input-device=keyboard and output-device=screen openprom variables set.
So add bootconsole detection to the list of things that are screwy.
The most recent working kernel I have is 2.6.20 from the gentoo 2007.0
livecd. I'm pretty sure I tried a 2.6.26 boot CD that failed, so I
assume that the problems begin sometime between those versions.
I'm happy to try different kernels from 2.6.20 onwards until I hit the
bug, thought it will take me some time to work through them. Also
unfortunately the keep_bootcon patch
(http://patchwork.ozlabs.org/patch/78102/) doesn't apply cleanly to
2.6.20, which I would need to see the kernel panics. I'll get started
and let you know when I track down where the problems begin.
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: bug report: Sun Blade 100 kernel panics during boot under 3.0.3
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
` (8 preceding siblings ...)
2011-08-25 17:48 ` Jim Faulkner
@ 2011-08-25 18:28 ` Josip Rodin
2011-08-26 1:39 ` David Miller
` (6 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Josip Rodin @ 2011-08-25 18:28 UTC (permalink / raw)
To: sparclinux
On Thu, Aug 25, 2011 at 01:48:55PM -0400, Jim Faulkner wrote:
> The most recent working kernel I have is 2.6.20 from the gentoo 2007.0
> livecd. I'm pretty sure I tried a 2.6.26 boot CD that failed, so I
> assume that the problems begin sometime between those versions.
>
> I'm happy to try different kernels from 2.6.20 onwards until I hit the
> bug, thought it will take me some time to work through them. Also
> unfortunately the keep_bootcon patch
> (http://patchwork.ozlabs.org/patch/78102/) doesn't apply cleanly to
> 2.6.20, which I would need to see the kernel panics. I'll get started
> and let you know when I track down where the problems begin.
IIRC older versions allowed us to specify "-p" as a parameter that had the
same effect.
If that doesn't work, you can also get the same by messing with the CON_BOOT
bit in a different place... [googling...] here we go, try the patch at the
bottom of http://patchwork.ozlabs.org/patch/14614/
Also the same bug report happens to have another possibly useful hint - the
'initcall_debug=1 ignore_loglevel' options.
--
2. That which causes joy or happiness.
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: bug report: Sun Blade 100 kernel panics during boot under 3.0.3
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
` (9 preceding siblings ...)
2011-08-25 18:28 ` Josip Rodin
@ 2011-08-26 1:39 ` David Miller
2011-08-30 23:01 ` Jim Faulkner
` (5 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: David Miller @ 2011-08-26 1:39 UTC (permalink / raw)
To: sparclinux
From: Jim Faulkner <jfaulkne@ccs.neu.edu>
Date: Thu, 25 Aug 2011 13:48:55 -0400
> Yes I agree that there's something screwy in the detection logic. I get
> a "console [tty0] enabled, bootconsole disabled" when I don't use the
> keep_bootcon kernel parameter, even though I have the
> input-device=keyboard and output-device=screen openprom variables set.
> So add bootconsole detection to the list of things that are screwy.
That's not the problem, this is a known issue.
Early in boot the firmware based console attaches.
Then the generic VT layer attaches and takes over the console, but
because the framebuffer and serial layer hasn't probed devices yet you
get a period during the boot during which no console output occurs.
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: bug report: Sun Blade 100 kernel panics during boot under 3.0.3
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
` (10 preceding siblings ...)
2011-08-26 1:39 ` David Miller
@ 2011-08-30 23:01 ` Jim Faulkner
2011-08-30 23:26 ` David Miller
` (4 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Jim Faulkner @ 2011-08-30 23:01 UTC (permalink / raw)
To: sparclinux
Well, I've made a little bit of progress. linux-2.6.21.7 boots, while
linux-2.6.22.19 does not. With the latter kernel, this is the last
message before the machine hangs:
mem_init: Calling free_all_bootmem().
linux-2.6.23.17 exhibits the same symptom. I'll start testing the
2.6.22-rc kernels until I narrow down the problem kernel.
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: bug report: Sun Blade 100 kernel panics during boot under 3.0.3
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
` (11 preceding siblings ...)
2011-08-30 23:01 ` Jim Faulkner
@ 2011-08-30 23:26 ` David Miller
2011-08-31 0:47 ` Jim Faulkner
` (3 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: David Miller @ 2011-08-30 23:26 UTC (permalink / raw)
To: sparclinux
From: Jim Faulkner <jfaulkne@ccs.neu.edu>
Date: Tue, 30 Aug 2011 19:01:10 -0400
> Well, I've made a little bit of progress. linux-2.6.21.7 boots, while
> linux-2.6.22.19 does not. With the latter kernel, this is the last
> message before the machine hangs:
> mem_init: Calling free_all_bootmem().
>
> linux-2.6.23.17 exhibits the same symptom. I'll start testing the
> 2.6.22-rc kernels until I narrow down the problem kernel.
Don't bother, I don't think this isn't going to help us.
The core issue is that devices are showing up multiple times in
the device tree, and the kernel gets really upset that we try
to register those PCI devices multiple times.
The two devices that show up twice are devfn=0x18 and devfn=0x38,
the 0x18 one is the PMU but I don't know what the 0x38 device is
since it doesn't show up in the sb100 example prtconf output we
have in the prtconf archive GIT tree:
git://git.kernel.org/pub/scm/linux/kernel/git/davem/prtconfs.git
To get the devfn for a PCI device tree node, take the first 32-bit
word in the 'reg' property and extract bits 15-8 (ie '(reg>>8)&0xff')
Can you give us "/usr/sbin/prtconf -pv" output from a working boot
so we can add it to our collection? Thanks.
Try turning on the ofpci_verbose tracing facility by passing
'ofpci_debug=1' on the kernel command line.
Either something is wrong with the OF device tree we import into
memory, or for some reason we scan the PBM's PCI bus twice. I
think the second is the most unlikely since there is special code
to prevent multiple PBMs from being probed in pci_sabre.c
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: bug report: Sun Blade 100 kernel panics during boot under 3.0.3
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
` (12 preceding siblings ...)
2011-08-30 23:26 ` David Miller
@ 2011-08-31 0:47 ` Jim Faulkner
2011-08-31 7:04 ` bug report: Sun Blade 100 kernel panics during boot under Meelis Roos
` (2 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Jim Faulkner @ 2011-08-31 0:47 UTC (permalink / raw)
To: sparclinux
[-- Attachment #1: Type: text/plain, Size: 653 bytes --]
On Tue, Aug 30, 2011 at 07:26:24PM -0400, David Miller wrote:
>
> Can you give us "/usr/sbin/prtconf -pv" output from a working boot
> so we can add it to our collection? Thanks.
>
> Try turning on the ofpci_verbose tracing facility by passing
> 'ofpci_debug=1' on the kernel command line.
>
OK, I've attached the output of prtconf -pv. AFAIK the only things in
the box that didn't ship from the factory are a tulip ethernet card and
the hard drives. I don't have a reason to believe that they are causing
the problem.
I won't have the time to sit down in front of this box for a few days,
but I'll try the tracing facility the next time I do.
[-- Attachment #2: prtconf-pv.txt --]
[-- Type: text/plain, Size: 38869 bytes --]
System Configuration: Sun Microsystems sun4u
Memory size: 896 Megabytes
System Peripherals (PROM Nodes):
Node 0xf0029598
.node: f0029598
banner-name: 'Sun Blade 100 (UltraSPARC-IIe)'
clock-frequency: 04fca6ea
energystar-v3:
idprom: 01830003.ba084e64.000003ba.084e6482.00000000.00000000.00000000.00000000
scsi-initiator-id: 00000007
reset-reason: 'POR'
breakpoint-trap: 0000007f
#size-cells: 00000002
model: 'SUNW,375-0096'
name: 'SUNW,Sun-Blade-100'
device_type: 'upa'
stick-frequency: 0054c563
Node 0xf002c72c
.node: f002c72c
name: 'packages'
Node 0xf0046d78
.node: f0046d78
name: 'SUNW,builtin-drivers'
Node 0xf0050f8c
.node: f0050f8c
disk-write-fix:
name: 'deblocker'
Node 0xf0051470
.node: f0051470
name: 'disk-label'
Node 0xf0051dc4
.node: f0051dc4
iso6429-1983-colors:
name: 'terminal-emulator'
Node 0xf005990c
.node: f005990c
source: '/flashprom@0,0:'
name: 'dropins'
Node 0xf00653c0
.node: f00653c0
name: 'obp-tftp'
Node 0xf006a8c4
.node: f006a8c4
name: 'kbd-translator'
Node 0xf002c7a4
.node: f002c7a4
bootargs: 00
bootpath: '/pci@1f,0/ide@d/cdrom@1,0:f'
mmu: fff73328
memory: fff73538
stdout: fff49748
stdin: fff319b8
stdout-#lines: 00000022
name: 'chosen'
Node 0xf002c818
.node: f002c818
version: 'OBP 4.13.4 2004/05/19 18:35'
model: 'SUNW,4.13.4'
aligned-allocator:
relative-addressing:
name: 'openprom'
Node 0xf002c8a8
.node: f002c8a8
name: 'client-services'
Node 0xf002c960
.node: f002c960
test-args:
diag-passes: '1'
pci-probe-list: '7,c,3,8,d,13,5'
local-mac-address?: 'false'
fcode-debug?: 'false'
silent-mode?: 'false'
scsi-initiator-id: '7'
oem-logo:
oem-logo?: 'false'
oem-banner:
oem-banner?: 'false'
ansi-terminal?: 'true'
screen-#columns: '80'
screen-#rows: '34'
ttyb-rts-dtr-off: 'false'
ttyb-ignore-cd: 'true'
ttya-rts-dtr-off: 'false'
ttya-ignore-cd: 'true'
ttyb-mode: '9600,8,n,1,-'
ttya-mode: '9600,8,n,1,-'
output-device: 'screen'
input-device: 'keyboard'
load-base: '16384'
auto-boot?: 'true'
boot-command: 'boot'
diag-file:
diag-device: 'disk net'
boot-file:
boot-device: 'disk2'
use-nvramrc?: 'true'
nvramrc: 3a206865.6c6c6f20.28202e2e.20290a2e.22204865.6c6c6f2c.20776f72.6c642e20.22206372.0a3b0a0a.2e224865.6c6c6f20.776f726c.642e2220.63720a3b.0a0a0a0a.52415354.4552434f.4e534f4c.455f4247.434f4c3d.5753434f.4c5f424c.41434b0a
security-mode: 'none'
security-password:
security-#badlogins: '0'
diag-script: 'none'
diag-level: 'max'
diag-switch?: 'false'
error-reset-recovery: 'boot'
name: 'options'
Node 0xf002c9d8
.node: f002c9d8
screen: '/pci@1f,0/SUNW,m64B@13'
mouse: '/pci@1f,0/usb@c,3/hub@4/mouse@4'
keyboard: '/pci@1f,0/usb@c,3/keyboard@3'
net: '/pci@1f,0/network@c,1'
cdrom2: '/pci@1f,0/ide@d/cdrom@2,0:f'
cdrom1: '/pci@1f,0/ide@d/cdrom@1,0:f'
cdrom: '/pci@1f,0/ide@d/cdrom@1,0:f'
disk: '/pci@1f,0/ide@d/disk@0,0'
disk3: '/pci@1f,0/ide@d/disk@3,0'
disk2: '/pci@1f,0/ide@d/disk@2,0'
disk1: '/pci@1f,0/ide@d/disk@1,0'
disk0: '/pci@1f,0/ide@d/disk@0,0'
ide: '/pci@1f,0/ide@d'
floppy: '/pci@1f,0/isa@7/dma/floppy'
ttyb: '/pci@1f,0/isa@7/serial@0,2e8'
ttya: '/pci@1f,0/isa@7/serial@0,3f8'
name: 'aliases'
Node 0xf003d3d4
.node: f003d3d4
reg: 00000000.00000000.00000000.08000000.00000000.20000000.00000000.10000000.00000000.40000000.00000000.10000000.00000000.60000000.00000000.10000000
available: 00000000.6fdd6000.00000000.00010000.00000000.6f000000.00000000.00dd2000.00000000.60000000.00000000.0effe000.00000000.40000000.00000000.10000000.00000000.20000000.00000000.10000000.00000000.00000000.00000000.08000000
name: 'memory'
Node 0xf003da4c
.node: f003da4c
translations: 00000000.00002000.00000000.003fe000.80000000.00002036.00000000.00400000.00000000.00800000.80000000.6f000036.00000000.40000000.00000000.00800000.80000000.6f000036.00000000.f0000000.00000000.00080000.80000000.6ff800b6.00000000.f0080000.00000000.00010000.80000000.6ff200b6.00000000.f0090000.00000000.00010000.80000000.6fdf00b6.00000000.f00a0000.00000000.00010000.80000000.6ff100b6.00000000.f00b0000.00000000.00010000.80000000.6ff000b6.00000000.fde00000.00000000.01000000.800001ff.0300008e.00000000.fee00000.00000000.00100000.800001ff.f000008e.00000000.fef00000.00000000.00100000.80000000.6fe000b6.00000000.fff00000.00000000.00004000.80000000.6ff4c0b6.00000000.fff04000.00000000.00010000.800001fe.0000008e.00000000.fff18000.00000000.00002000.80000000.6ff560b6.00000000.fff28000.00000000.00006000.80000000.6fdea0b6.00000000.fff2e000.00000000.00002000.80000000.6ff380b6.00000000.fff30000.00000000.00004000.80000000.6ff300b6.00000000.fff34000.00000000.00004000.80000000.6ff3a0b6.00000000.fff38000.00000000.00002000.800001ff.0200008e.00000000.fff3c000.00000000.00004000.80000000.6ff340b6.00000000.fff40000.00000000.00002000.800001fe.0200008e.00000000.fff42000.00000000.00002000.800001fe.0100008e.00000000.fff44000.00000000.00002000.80000000.6ff420b6.00000000.fff46000.00000000.00002000.800001ff.0042208e.00000000.fff48000.00000000.00002000.80000000.6ff460b6.00000000.fff4a000.00000000.00002000.800001fe.0100008e.00000000.fff4c000.00000000.00002000.80000000.6ff440b6.00000000.fff4e000.00000000.00002000.800001fe.0200008e.00000000.fff50000.00000000.00002000.800001ff.f100008e.00000000.fff52000.00000000.00004000.80000000.6ff480b6.00000000.fff56000.00000000.00004000.80000000.6ff500b6.00000000.fff5a000.00000000.00002000.80000000.6effe0b6.00000000.fff60000.00000000.00010000.80000000.6ff580b6.00000000.fff70000.00000000.00010000.80000000.6ff700b6
existing: 00000000.00000000.00000800.00000000.fffff800.00000000.00000800.00000000
available: fffff800.00000000.000007fc.00000000.00000001.00000000.000007ff.00000000.00000000.ffff0000.00000000.0000e000.00000000.00000000.00000000.f0000000.00000000.fff3a000.00000000.00002000.00000000.fff1a000.00000000.0000e000.00000000.fff14000.00000000.00004000.00000000.f0800000.00000000.0d600000
page-size: 00002000
name: 'virtual-memory'
Node 0xf005c528
.node: f005c528
available: 81000000.00000000.00000a30.00000000.000000d0.81000000.00000000.00000c00.00000000.00000400.81000000.00000000.00002000.00000000.0000e000.82000000.00000000.00428000.00000000.00018000.82000000.00000000.00460000.00000000.003a0000.82000000.00000000.01400000.00000000.00c00000.82000000.00000000.04100000.00000000.5bf00000.82000000.00000000.80000000.00000000.40000000.82000000.00000000.e0000000.00000000.10000000
bus-range: 00000000.00000001
interrupt-map: 00000800.00000000.00000000.00000002.f005c528.00000006.00000800.00000000.00000000.00000003.f005c528.0000001c.00000800.00000000.00000000.00000004.f005c528.00000024.00001000.00000000.00000000.00000001.f005c528.0000000f.00001800.00000000.00000000.00000001.f005c528.0000001e.00004000.00000000.00000000.00000001.f005c528.00000023.00006000.00000000.00000000.00000002.f005c528.00000006.00006000.00000000.00000000.00000003.f005c528.0000001c.00006000.00000000.00000000.00000004.f005c528.00000024.00006800.00000000.00000000.00000001.f005c528.0000000c.00003800.00000000.00000000.00000001.f005c528.0000002a.00003800.00000000.00000000.00000002.f005c528.00000027.00003800.00000000.00000000.00000003.f005c528.00000021.00003800.00000000.00000000.00000004.f005c528.0000002b.00003800.00000000.00000000.00000005.f005c528.00000020.00009800.00000000.00000000.00000001.f005c528.0000000f
interrupt-map-mask: 00fff800.00000000.00000000.00000007
#interrupt-cells: 00000001
virtual-dma: c0000000.20000000
reg: 000001fe.00000000.00000000.00010000.000001fe.01000000.00000000.00000100
ranges: 00000000.00000000.00000000.000001fe.01000000.00000000.01000000.01000000.00000000.00000000.000001fe.02000000.00000000.01000000.02000000.00000000.00000000.000001ff.00000000.00000001.00000000.03000000.00000000.00000000.000001ff.00000000.00000001.00000000
#virtual-dma-size-cells: 00000001
#virtual-dma-addr-cells: 00000001
clock-frequency: 01f78a40
latency-timer:
button-interrupt:
no-streaming-cache:
interrupts: 00000030.0000002e.0000002f.00000025
upa-portid: 0000001f
bus-parity-generated:
compatible: 'pci108e,a001'
name: 'pci'
device_type: 'pci'
#address-cells: 00000003
#size-cells: 00000002
Node 0xf006b6b4
.node: f006b6b4
interrupt-map-mask: 0000001f.00ffffff.00000003
#interrupt-cells: 00000001
ranges: 00000000.00000000.82006010.00000000.f0000000.01000000.00000001.00000000.82006014.00000000.f1000000.00800000
reg: 00006000.00000000.00000000.00000000.00000000.82006010.00000000.f0000000.00000000.01000000.82006014.00000000.f1000000.00000000.00800000
#size-cells: 00000001
#address-cells: 00000002
name: 'ebus'
max-latency: 00000019
min-grant: 0000000a
class-code: 00068000
revision-id: 00000001
devsel-speed: 00000001
fast-back-to-back:
device-id: 00001100
vendor-id: 0000108e
Node 0xf006c758
.node: f006c758
model: 'SUNW,370-4116'
version: 4f425020.342e3133.2e342032.3030342f.30352f31.39203138.3a333500.504f5354.20322e30.2e312032.3030312f.30382f32.33203137.3a313300.4f424449.41472034.2e31332e.34203230.30342f30.352f3139.2031383a.33392020.00
name: 'flashprom'
reg: 00000000.00000000.00100000
Node 0xf006d3ec
.node: f006d3ec
model: 'mk48t59'
address: fff50000
reg: 00000001.00000000.00002000
device_type: 'nvram'
name: 'eeprom'
Node 0xf006e01c
.node: f006e01c
device_type: 'idprom'
name: 'idprom'
Node 0xf006e250
.node: f006e250
assigned-addresses: 81003810.00000000.00000000.00000000.00010000.82003814.00000000.00000000.00000000.00100000
interrupt-map: 00000000.00000000.00000001.f005c528.0000002a.00000000.00000800.00000001.f005c528.00000020.00000000.000003f8.00000001.f005c528.0000002b.00000000.000002e8.00000001.f005c528.0000002b
interrupt-map-mask: 00000003.00ffffff.0000000f
#interrupt-cells: 00000001
ranges: 00000000.00000000.81003810.00000000.00000000.00010000.00000001.00000000.82003814.00000000.00000000.00100000
reg: 00003800.00000000.00000000.00000000.00000000.81003810.00000000.00000000.00000000.00010000.82003814.00000000.00000000.00000000.00100000
#size-cells: 00000001
#address-cells: 00000002
name: 'isa'
devsel-speed: 00000001
class-code: 00060100
latency-timer: 00000000
cache-line-size: 00000000
max-latency: 00000000
min-grant: 00000000
subsystem-id: 00001533
subsystem-vendor-id: 000010b9
revision-id: 00000000
device-id: 00001533
vendor-id: 000010b9
Node 0xf006f518
.node: f006f518
interrupts: 00000001
interrupt-map: 00000000.000003f0.00000001.f005c528.00000027.00000000.00000378.00000001.f005c528.00000021
interrupt-map-mask: 00000000.00000fff.0000000f
reg: 00000000.00000000.00010000
compatible: 'isadma'
name: 'dma'
Node 0xf006fda4
.node: f006fda4
manual:
interrupts: 00000001
unit: 00000001
dma-channel: 00000002
reg: 00000000.000003f0.00000008.00000000.00000000.00000500
compatible: 'pnpALI,1533,0'
name: 'floppy'
Node 0xf006ff1c
.node: f006ff1c
interrupts: 00000001
reg: 00000000.00000378.00000008.00000000.00000000.00000500
dma-channel: 00000001
compatible: 'pnpALI,1533,3'
name: 'parallel'
Node 0xf00700d4
.node: f00700d4
button:
interrupts: 00000001
reg: 00000000.00000800.00000030
compatible: 'acpi-power'
name: 'power'
Node 0xf007024c
.node: f007024c
ignore-cd:
reg: 00000000.000003f8.00000008
interrupts: 00000001
compatible: 73753136.35353000.737500
device_type: 'serial'
name: 'serial'
Node 0xf0071c8c
.node: f0071c8c
ignore-cd:
reg: 00000000.000002e8.00000008
interrupts: 00000001
compatible: 73753136.35353000.737500
device_type: 'serial'
name: 'serial'
Node 0xf0073770
.node: f0073770
assigned-addresses: 81001810.00000000.00000000.00000000.00000010
ranges: 00000000.00000000.00001800.00000000.00000000.00000100.00000001.00000000.81001810.00000000.00000600.00000100.00000002.00000000.81001814.00000000.00000000.00000100
reg: 00001800.00000000.00000000.00000000.00000000.81001810.00000000.00000600.00000000.00000010
compatible: 70636931.3062392c.37313031.2e300070.63693130.62392c37.31303100.70636963.6c617373.2c303030.30303000.70636963.6c617373.2c303030.3000
#address-cells: 00000002
#size-cells: 00000001
name: 'pmu'
devsel-speed: 00000001
class-code: 00000000
latency-timer: 00000000
cache-line-size: 00000000
max-latency: 00000000
min-grant: 00000000
revision-id: 00000000
device-id: 00007101
vendor-id: 000010b9
Node 0xf00747d8
.node: f00747d8
reg: 00000000.00000000.00000100.00000001.00000000.00000100
#address-cells: 00000002
#size-cells: 00000000
interrupts: 00000001
compatible: 'i2c-smbus'
name: 'i2c'
Node 0xf0075cb0
.node: f0075cb0
reg: 00000000.00000030
compatible: 'i2c-max1617'
name: 'temperature'
Node 0xf0075d78
.node: f0075d78
reg: 00000000.00000040
compatible: 'i2c-scm001'
name: 'card-reader'
Node 0xf0075e40
.node: f0075e40
reg: 00000000.000000a0
compatible: 'i2c-at34c02'
name: 'dimm-spd'
Node 0xf0076000
.node: f0076000
reg: 00000000.000000a2
compatible: 'i2c-at34c02'
name: 'dimm-spd'
Node 0xf00761c0
.node: f00761c0
reg: 00000000.000000a4
compatible: 'i2c-at34c02'
name: 'dimm-spd'
Node 0xf0076380
.node: f0076380
reg: 00000000.000000a6
compatible: 'i2c-at34c02'
name: 'dimm-spd'
Node 0xf00765b4
.node: f00765b4
reg: 00000000.000000b2.00000001.00000000.000000d3.00000001.00000002.00000042.00000002.00000002.00000061.00000001
compatible: 'SUNW,smbus-beep'
name: 'beep'
Node 0xf00766e8
.node: f00766e8
register-mask: 00000000.00000001
reg: 00000000.000000b3.00000001.80000000.000000ba.00000001.00000000.000000bb.00000001
compatible: 'SUNW,smbus-ppm'
name: 'ppm'
Node 0xf007683c
.node: f007683c
register-mask: 00000000.00000002
reg: 00000000.000000c8.00000004.80000000.000000ba.00000001
compatible: 'SUNW,smbus-fan-control'
name: 'fan-control'
Node 0xf0076d28
.node: f0076d28
assigned-addresses: 81003810.00000000.00000000.00000000.00010000.82003814.00000000.00000000.00000000.00100000
interrupt-map: 00000000.00000000.00000001.f005c528.0000002a.00000000.00000800.00000001.f005c528.00000020.00000000.000003f8.00000001.f005c528.0000002b.00000000.000002e8.00000001.f005c528.0000002b
interrupt-map-mask: 00000003.00ffffff.0000000f
#interrupt-cells: 00000001
ranges: 00000000.00000000.81003810.00000000.00000000.00010000.00000001.00000000.82003814.00000000.00000000.00100000
reg: 00003800.00000000.00000000.00000000.00000000.81003810.00000000.00000000.00000000.00010000.82003814.00000000.00000000.00000000.00100000
#size-cells: 00000001
#address-cells: 00000002
name: 'isa'
devsel-speed: 00000001
class-code: 00060100
latency-timer: 00000000
cache-line-size: 00000000
max-latency: 00000000
min-grant: 00000000
subsystem-id: 00001533
subsystem-vendor-id: 000010b9
revision-id: 00000000
device-id: 00001533
vendor-id: 000010b9
Node 0xf0077ff0
.node: f0077ff0
interrupts: 00000001
interrupt-map: 00000000.000003f0.00000001.f005c528.00000027.00000000.00000378.00000001.f005c528.00000021
interrupt-map-mask: 00000000.00000fff.0000000f
reg: 00000000.00000000.00010000
compatible: 'isadma'
name: 'dma'
Node 0xf007887c
.node: f007887c
manual:
interrupts: 00000001
unit: 00000001
dma-channel: 00000002
reg: 00000000.000003f0.00000008.00000000.00000000.00000500
compatible: 'pnpALI,1533,0'
name: 'floppy'
Node 0xf00789f4
.node: f00789f4
interrupts: 00000001
reg: 00000000.00000378.00000008.00000000.00000000.00000500
dma-channel: 00000001
compatible: 'pnpALI,1533,3'
name: 'parallel'
Node 0xf0078bac
.node: f0078bac
button:
interrupts: 00000001
reg: 00000000.00000800.00000030
compatible: 'acpi-power'
name: 'power'
Node 0xf0078d24
.node: f0078d24
reg: 00000000.000003f8.00000008
interrupts: 00000001
compatible: 73753136.35353000.737500
device_type: 'serial'
name: 'serial'
Node 0xf007a764
.node: f007a764
reg: 00000000.000002e8.00000008
interrupts: 00000001
compatible: 73753136.35353000.737500
device_type: 'serial'
name: 'serial'
Node 0xf007c414
.node: f007c414
assigned-addresses: 82006110.00000000.00400000.00000000.00020000.82006130.00000000.00800000.00000000.00400000
shared-pins: 'mii'
interrupts: 00000002
model: 'SUNW,pci-eri'
version: '1.11'
compatible: 70636931.3038652c.31313031.2e310070.63693130.38652c31.31303100.70636963.6c617373.2c303230.30303000.70636963.6c617373.2c303230.3000
device_type: 'network'
address-bits: 00000030
max-frame-size: 00004000
reg: 00006100.00000000.00000000.00000000.00000000.02006110.00000000.00000000.00000000.00008000
name: 'network'
fast-back-to-back:
devsel-speed: 00000001
class-code: 00020000
latency-timer: 00000040
cache-line-size: 00000010
max-latency: 00000005
min-grant: 0000000a
revision-id: 00000001
device-id: 00001101
vendor-id: 0000108e
Node 0xf0084a04
.node: f0084a04
assigned-addresses: 82006210.00000000.00420000.00000000.00002000.82006214.00000000.00422000.00000000.00002000.82006230.00000000.00c00000.00000000.00400000
reg: 00006200.00000000.00000000.00000000.00000000.02006210.00000000.00000000.00000000.00002000.02006214.00000000.00000000.00000000.00002000.02006230.00000000.00000000.00000000.00400000
compatible: 70636931.3038652c.31313032.2e313030.31007063.69313038.652c3131.30320070.6369636c.6173732c.30633030.31300070.6369636c.6173732c.30633030.00
name: 'firewire'
interrupts: 00000003
fast-back-to-back:
devsel-speed: 00000001
class-code: 000c0010
latency-timer: 00000040
cache-line-size: 00000010
max-latency: 00000005
min-grant: 0000000a
revision-id: 00000001
device-id: 00001102
vendor-id: 0000108e
Node 0xf0084d40
.node: f0084d40
assigned-addresses: 82006310.00000000.02000000.00000000.01000000.82006330.00000000.01000000.00000000.00400000
sunw,find-fcode: f008a09c
maximum-frame#: 0000ffff
reg: 00006300.00000000.00000000.00000000.00000000.02006310.00000000.00000000.00000000.01000000
#size-cells: 00000000
#address-cells: 00000001
compatible: 70636931.3038652c.31313033.2e310070.63693130.38652c31.31303300.70636963.6c617373.2c306330.33313000.70636963.6c617373.2c306330.3300
name: 'usb'
interrupts: 00000004
fast-back-to-back:
devsel-speed: 00000001
class-code: 000c0310
latency-timer: 00000040
cache-line-size: 00000010
max-latency: 00000005
min-grant: 0000000a
revision-id: 00000001
device-id: 00001103
vendor-id: 0000108e
Node 0xf008aeb4
.node: f008aeb4
keyboard:
endpoints: '0,8,81,8'
interface#: 00000000
compatible: 75736234.33302c35.2e313032.00757362.3433302c.35007573.62696634.33302c63.6c617373.332e312e.31007573.62696634.33302c63.6c617373.332e3100.75736269.66343330.2c636c61.73733300.75736269.662c636c.61737333.2e312e31.00757362.69662c63.6c617373.332e3100.75736269.662c636c.61737333.00
name: 'keyboard'
reg: 00000003
low-speed:
assigned-address: 00000002
0max-packet: 00000008
Node 0xf0090adc
.node: f0090adc
#size-cells: 00000000
#address-cells: 00000001
endpoints: '0,8,81,1'
interface#: 00000000
compatible: 75736234.35312c32.3034362e.31323500.75736234.35312c32.30343600.75736234.35312c63.6c617373.392e302e.30007573.62343531.2c636c61.7373392e.30007573.62343531.2c636c61.73733900.7573622c.636c6173.73392e30.2e300075.73622c63.6c617373.392e3000.7573622c.636c6173.73390075.73626966.3435312c.636c6173.73392e30.2e300075.73626966.3435312c.636c6173.73392e30.00757362.69663435.312c636c.61737339.00757362.69662c63.6c617373.392e302e.30007573.6269662c.636c6173.73392e30.00757362.69662c63.6c617373.3900
name: 'hub'
reg: 00000004
assigned-address: 00000003
0max-packet: 00000008
Node 0xf0095d18
.node: f0095d18
keyboard:
endpoints: '0,8,81,8'
interface#: 00000000
compatible: 75736234.3133632c.32313035.2e333530.00757362.34313363.2c323130.35007573.62696634.3133632c.636c6173.73332e31.2e310075.73626966.34313363.2c636c61.7373332e.31007573.62696634.3133632c.636c6173.73330075.73626966.2c636c61.7373332e.312e3100.75736269.662c636c.61737333.2e310075.73626966.2c636c61.73733300
name: 'keyboard'
reg: 00000003
low-speed:
assigned-address: 00000004
0max-packet: 00000008
Node 0xf009b914
.node: f009b914
mouse:
endpoints: '0,8,81,4'
interface#: 00000000
compatible: 75736234.35652c34.302e3330.30007573.62343565.2c343000.75736269.66343565.2c636c61.7373332e.312e3200.75736269.66343565.2c636c61.7373332e.31007573.62696634.35652c63.6c617373.33007573.6269662c.636c6173.73332e31.2e320075.73626966.2c636c61.7373332e.31007573.6269662c.636c6173.733300
name: 'mouse'
reg: 00000004
low-speed:
assigned-address: 00000005
0max-packet: 00000008
Node 0xf009dc7c
.node: f009dc7c
assigned-addresses: 81001810.00000000.00000000.00000000.00000010
ranges: 00000000.00000000.00001800.00000000.00000000.00000100.00000001.00000000.81001810.00000000.00000600.00000100.00000002.00000000.81001814.00000000.00000000.00000100
reg: 00001800.00000000.00000000.00000000.00000000.81001810.00000000.00000600.00000000.00000010
compatible: 70636931.3062392c.37313031.2e300070.63693130.62392c37.31303100.70636963.6c617373.2c303030.30303000.70636963.6c617373.2c303030.3000
#address-cells: 00000002
#size-cells: 00000001
name: 'pmu'
devsel-speed: 00000001
class-code: 00000000
latency-timer: 00000000
cache-line-size: 00000000
max-latency: 00000000
min-grant: 00000000
revision-id: 00000000
device-id: 00007101
vendor-id: 000010b9
Node 0xf009ece4
.node: f009ece4
reg: 00000000.00000000.00000100.00000001.00000000.00000100
#address-cells: 00000002
#size-cells: 00000000
interrupts: 00000001
compatible: 'i2c-smbus'
name: 'i2c'
Node 0xf00a01bc
.node: f00a01bc
reg: 00000000.00000030
compatible: 'i2c-max1617'
name: 'temperature'
Node 0xf00a0284
.node: f00a0284
reg: 00000000.00000040
compatible: 'i2c-scm001'
name: 'card-reader'
Node 0xf00a034c
.node: f00a034c
reg: 00000000.000000a0
compatible: 'i2c-at34c02'
name: 'dimm-spd'
Node 0xf00a050c
.node: f00a050c
reg: 00000000.000000a2
compatible: 'i2c-at34c02'
name: 'dimm-spd'
Node 0xf00a06cc
.node: f00a06cc
reg: 00000000.000000a4
compatible: 'i2c-at34c02'
name: 'dimm-spd'
Node 0xf00a088c
.node: f00a088c
reg: 00000000.000000a6
compatible: 'i2c-at34c02'
name: 'dimm-spd'
Node 0xf00a0ac0
.node: f00a0ac0
reg: 00000000.000000b2.00000001.00000000.000000d3.00000001.00000002.00000042.00000002.00000002.00000061.00000001
compatible: 'SUNW,smbus-beep'
name: 'beep'
Node 0xf00a0bf4
.node: f00a0bf4
register-mask: 00000000.00000001
reg: 00000000.000000b3.00000001.80000000.000000ba.00000001.00000000.000000bb.00000001
compatible: 'SUNW,smbus-ppm'
name: 'ppm'
Node 0xf00a0d48
.node: f00a0d48
register-mask: 00000000.00000002
reg: 00000000.000000c8.00000004.80000000.000000ba.00000001
compatible: 'SUNW,smbus-fan-control'
name: 'fan-control'
Node 0xf00a0f30
.node: f00a0f30
assigned-addresses: 81004010.00000000.00000900.00000000.00000100.82004014.00000000.00424000.00000000.00002000
reg: 00004000.00000000.00000000.00000000.00000000.01004010.00000000.00000000.00000000.00000100.02004014.00000000.00000000.00000000.00002000
compatible: 70636931.3062392c.35343531.2e313062.392e3534.35312e31.00706369.31306239.2c353435.312e3130.62392e35.34353100.70636931.3062392c.35343531.00706369.31306239.2c353435.312e3100.70636931.3062392c.35343531.00706369.636c6173.732c3034.30313030.00706369.636c6173.732c3034.303100
name: 'sound'
fast-back-to-back:
devsel-speed: 00000001
class-code: 00040100
interrupts: 00000001
latency-timer: 00000040
cache-line-size: 00000000
max-latency: 00000018
min-grant: 00000002
subsystem-id: 00005451
subsystem-vendor-id: 000010b9
revision-id: 00000001
device-id: 00005451
vendor-id: 000010b9
Node 0xf00a12d0
.node: f00a12d0
assigned-addresses: 81006810.00000000.00000a00.00000000.00000008.81006814.00000000.00000a18.00000000.00000008.81006818.00000000.00000a10.00000000.00000008.8100681c.00000000.00000a08.00000000.00000008.81006820.00000000.00000a20.00000000.00000010
reg: 00006800.00000000.00000000.00000000.00000000.01006810.00000000.00000000.00000000.00000008.01006814.00000000.00000000.00000000.00000004.01006818.00000000.00000000.00000000.00000008.0100681c.00000000.00000000.00000000.00000004.01006820.00000000.00000000.00000000.00000010
compatible: 70636931.3062392c.35323239.2e633300.70636931.3062392c.35323239.00706369.636c6173.732c3031.30316666.00706369.636c6173.732c3031.303100
#address-cells: 00000002
device_type: 'ide'
name: 'ide'
fast-back-to-back:
devsel-speed: 00000001
class-code: 000101ff
interrupts: 00000001
latency-timer: 00000040
cache-line-size: 00000000
max-latency: 00000004
min-grant: 00000002
revision-id: 000000c3
device-id: 00005229
vendor-id: 000010b9
Node 0xf00a3eac
.node: f00a3eac
device_type: 'block'
name: 'disk'
compatible: 'ide-disk'
Node 0xf00a4560
.node: f00a4560
device_type: 'block'
name: 'cdrom'
compatible: 'ide-cdrom'
Node 0xf00a4ec8
.node: f00a4ec8
address: fde00000
assigned-addresses: 82009810.00000000.03000000.00000000.01000000.81009814.00000000.00000b00.00000000.00000100.82009818.00000000.00426000.00000000.00002000.82009830.00000000.00440000.00000000.00020000
aty,fcode: '1.69'
aty,card#: '109-XXXXX-XX'
aty,rom#: '113-XXXXX-100'
model: 'ATY,RageXL'
name: 'SUNW,m64B'
pgx_version: '@(#) pgx24+.fth 1.8 01/03/12 '
reg: 00009800.00000000.00000000.00000000.00000000.02009810.00000000.00000000.00000000.01000000.02009818.00000000.00000000.00000000.00001000.02009830.00000000.00000000.00000000.00020000
character-set: 'ISO8859-1'
device_type: 'display'
linebytes: 00000500
depth: 00000008
height: 00000400
width: 00000500
fb-memory: 00000008
aty,flags: 0000001b
aty,status: 00000004
edid: 00ffffff.ffffff00.10ac20a0.53344331.18100103.0e291f78.eeee91a3.544c9926.0f5054a5.4b008180.a940714f.01010101.01010101.0101483f.403062b0.324040c0.13006f13.1100001e.000000ff.00433935.33363636.45314334.530a0000.00fc0044.454c4c20.32303037.46500a20.000000fd.00384c1e.5311000a.20202020.2020002e
fast-back-to-back:
devsel-speed: 00000001
class-code: 00030000
interrupts: 00000001
latency-timer: 00000040
cache-line-size: 00000010
max-latency: 00000000
min-grant: 00000008
revision-id: 00000027
device-id: 00004752
vendor-id: 00001002
Node 0xf00ae520
.node: f00ae520
available: 81000000.00000000.00001100.00000000.00000f00.82000000.00000000.04002000.00000000.0001e000.82000000.00000000.04040000.00000000.000c0000
interrupt-map: 00010000.00000000.00000000.00000001.f005c528.00000019.00010000.00000000.00000000.00000002.f005c528.00000002.00010000.00000000.00000000.00000003.f005c528.00000018.00010000.00000000.00000000.00000004.f005c528.00000008.00010800.00000000.00000000.00000001.f005c528.0000000a.00010800.00000000.00000000.00000002.f005c528.0000001b.00010800.00000000.00000000.00000003.f005c528.0000000b.00010800.00000000.00000000.00000004.f005c528.0000001a.00011000.00000000.00000000.00000001.f005c528.00000015.00011000.00000000.00000000.00000002.f005c528.00000005.00011000.00000000.00000000.00000003.f005c528.00000014.00011000.00000000.00000000.00000004.f005c528.00000004
interrupt-map-mask: 00fff800.00000000.00000000.00000007
ranges: 81000000.00000000.00001000.81000000.00000000.00001000.00000000.00001000.82000000.00000000.04000000.82000000.00000000.04000000.00000000.00100000
bus-range: 00000001.00000001
compatible: 70636931.3031312c.32342e33.00706369.31303131.2c323400.70636963.6c617373.2c303630.34303000.70636963.6c617373.2c303630.3400
reg: 00002800.00000000.00000000.00000000.00000000
#address-cells: 00000003
#size-cells: 00000002
device_type: 'pci'
name: 'pci'
fast-back-to-back:
devsel-speed: 00000001
class-code: 00060400
latency-timer: 00000040
cache-line-size: 00000010
revision-id: 00000003
device-id: 00000024
vendor-id: 00001011
Node 0xf00af7b8
.node: f00af7b8
assigned-addresses: 81010810.00000000.00001000.00000000.00000100.82010814.00000000.04000000.00000000.00002000.82010830.00000000.04020000.00000000.00020000
reg: 00010800.00000000.00000000.00000000.00000000.01010810.00000000.00000000.00000000.00000100.02010814.00000000.00000000.00000000.00002000.02010830.00000000.00000000.00000000.00020000
compatible: 70636931.3331372c.3938352e.31313133.2e656330.322e3131.00706369.31333137.2c393835.2e313131.332e6563.30320070.63693131.31332c65.63303200.70636931.3331372c.3938352e.31310070.63693133.31372c39.38350070.6369636c.6173732c.30323030.30300070.6369636c.6173732c.30323030.00
name: 'ethernet'
fast-back-to-back:
devsel-speed: 00000001
class-code: 00020000
interrupts: 00000001
latency-timer: 00000040
cache-line-size: 00000010
max-latency: 000000ff
min-grant: 000000ff
subsystem-id: 0000ec02
subsystem-vendor-id: 00001113
revision-id: 00000011
device-id: 00000985
vendor-id: 00001317
Node 0xf0065088
.node: f0065088
clock-frequency: 1debe980
manufacturer#: 00000017
implementation#: 00000013
mask#: 00000014
clock-divisors: 00000001.00000002.00000006
ecache-size: 00040000
name: 'SUNW,UltraSPARC-IIe'
device_type: 'cpu'
sparc-version: 00000009
ecache-associativity: 00000004
ecache-line-size: 00000040
#dtlb-entries: 00000040
dcache-associativity: 00000001
dcache-line-size: 00000020
dcache-size: 00004000
#itlb-entries: 00000040
icache-associativity: 00000002
icache-line-size: 00000020
icache-size: 00004000
upa-portid: 00000000
reg: 000001c0.00000000.00000000.00000008
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: bug report: Sun Blade 100 kernel panics during boot under
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
` (13 preceding siblings ...)
2011-08-31 0:47 ` Jim Faulkner
@ 2011-08-31 7:04 ` Meelis Roos
2011-08-31 19:59 ` bug report: Sun Blade 100 kernel panics during boot under 3.0.3 David Miller
2011-09-02 1:10 ` Jim Faulkner
16 siblings, 0 replies; 18+ messages in thread
From: Meelis Roos @ 2011-08-31 7:04 UTC (permalink / raw)
To: sparclinux
Just a data point: my blade 100 has been running fine with most of the
kernels, including 3.0.0 and 3.1-rc3. Debian unstable, newest gcc at all
kernel compiles. My OF device tree is obviously different of course.
My config, if it is of any help:
#
# Automatically generated file; DO NOT EDIT.
# Linux/sparc64 3.1.0-rc3 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_SPARC=y
# CONFIG_SPARC32 is not set
CONFIG_SPARC64=y
CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc64_defconfig"
CONFIG_BITSd
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_IOMMU_HELPER=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT2
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_DEFAULT_HOSTNAME="murel"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_FHANDLE is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_PREFLOW_FASTEOI=y
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT\x17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
#
# GCOV-based kernel profiling
#
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_THROTTLING is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# Processor type and features
#
# CONFIG_SMP is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ\x100
CONFIG_SCHED_HRTICK=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_EARLYFB=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
# CONFIG_SECCOMP is not set
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_US3_MC is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR@96
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_CMDLINE_BOOL is not set
#
# Bus options (PCI etc.)
#
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
# CONFIG_SUN_LDOMS is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC64_PCI=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
CONFIG_OF_PROMTREE=y
CONFIG_OF_DEVICE=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_SUNBPP=m
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=m
# CONFIG_SCSI_3W_SAS is not set
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE2
CONFIG_AIC7XXX_RESET_DELAY_MSP00
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE2
CONFIG_AIC79XX_RESET_DELAY_MSP00
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
CONFIG_SCSI_HPTIOP=m
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_FUTURE_DOMAIN=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS\x16
CONFIG_SCSI_SYM53C8XX_MAX_TAGSd
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLOGICPTI is not set
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SUNESP is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SIL=m
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
CONFIG_MII=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
CONFIG_SUNGEM=m
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_GRETH is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_NET_POCKET is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set
#
# CAIF transport drivers
#
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X\x1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Yv8
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_SUNCORE=y
# CONFIG_SERIAL_SUNZILOG is not set
CONFIG_SERIAL_SUNSU=y
CONFIG_SERIAL_SUNSU_CONSOLE=y
# CONFIG_SERIAL_SUNSAB is not set
# CONFIG_SERIAL_SUNHV is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
# CONFIG_SENSORS_SCH5627 is not set
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_ADS1015 is not set
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
# CONFIG_SENSORS_W83795 is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_ULTRA45=m
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
# CONFIG_MFD_SUPPORT is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_RC_CORE=m
CONFIG_LIRC=m
CONFIG_RC_MAP=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_RC5_SZ_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_LIRC_CODEC=m
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
CONFIG_IR_REDRAT3=m
# CONFIG_IR_STREAMZAP is not set
CONFIG_RC_LOOPBACK=m
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
#
# Miscelaneous helper chips
#
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_MXB=m
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_VIDEO_SR030PC30=m
CONFIG_VIDEO_NOON010PC30=m
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_BENQ is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_CPIA1 is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
CONFIG_USB_GSPCA_NW80X=m
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_OV534_9 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
CONFIG_USB_GSPCA_SE401=m
# CONFIG_USB_GSPCA_SN9C2028 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SPCA1528 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_SQ930X is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
# CONFIG_USB_GSPCA_ZC3XX is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
#
# Graphics support
#
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS\x16
# CONFIG_DRM is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_TEA575X=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALI5451=m
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X_BOOL is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
CONFIG_SND_RIPTIDE=m
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
CONFIG_SND_YMFPCI=m
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_SPARC=y
# CONFIG_SND_SUN_AMD7930 is not set
CONFIG_SND_SUN_CS4231=m
# CONFIG_SND_SUN_DBRI is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
CONFIG_USB_SERIAL_ZIO=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=m
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=y
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SUN4V=y
CONFIG_RTC_DRV_STARFIRE=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_STAGING is not set
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_VIRT_DRIVERS is not set
#
# Misc Linux/SPARC drivers
#
CONFIG_SUN_OPENPROMIO=m
CONFIG_OBP_FLASH=m
# CONFIG_TADPOLE_TS102_UCTRL is not set
# CONFIG_BBC_I2C is not set
# CONFIG_ENVCTRL is not set
# CONFIG_DISPLAY7SEG is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=m
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGEw5
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_USE_NEW_IDMAPPER=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_ACL=y
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="UTF-8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN 48
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT\x120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_DEBUG_DCFLUSH is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_NLATTR=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
--
Meelis Roos (mroos@cyber.ee)
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: bug report: Sun Blade 100 kernel panics during boot under 3.0.3
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
` (14 preceding siblings ...)
2011-08-31 7:04 ` bug report: Sun Blade 100 kernel panics during boot under Meelis Roos
@ 2011-08-31 19:59 ` David Miller
2011-09-02 1:10 ` Jim Faulkner
16 siblings, 0 replies; 18+ messages in thread
From: David Miller @ 2011-08-31 19:59 UTC (permalink / raw)
To: sparclinux
From: Jim Faulkner <jfaulkne@ccs.neu.edu>
Date: Tue, 30 Aug 2011 20:47:16 -0400
> On Tue, Aug 30, 2011 at 07:26:24PM -0400, David Miller wrote:
>>
>> Can you give us "/usr/sbin/prtconf -pv" output from a working boot
>> so we can add it to our collection? Thanks.
>>
>> Try turning on the ofpci_verbose tracing facility by passing
>> 'ofpci_debug=1' on the kernel command line.
>>
>
> OK, I've attached the output of prtconf -pv. AFAIK the only things in
> the box that didn't ship from the factory are a tulip ethernet card and
> the hard drives. I don't have a reason to believe that they are causing
> the problem.
There is a non-trivial problem with the device tree reported by your
firmware, several PCI device nodes are reported multiple times.
If you'll look 'isa' appears twice, and so does 'pmu'.
This is a very serious issue.
And that's what is causing all of these boot failures.
I have two theories, either the Tulip card makes the firmware corrupt
the device tree like this. Or, alternatively, there is some bug in
the version of OBP installed on this machine.
This really isn't a kernel bug. And if it worked in the past, it worked
entirely by accident.
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: bug report: Sun Blade 100 kernel panics during boot under 3.0.3
2011-08-22 23:38 bug report: Sun Blade 100 kernel panics during boot under 3.0.3 Jim Faulkner
` (15 preceding siblings ...)
2011-08-31 19:59 ` bug report: Sun Blade 100 kernel panics during boot under 3.0.3 David Miller
@ 2011-09-02 1:10 ` Jim Faulkner
16 siblings, 0 replies; 18+ messages in thread
From: Jim Faulkner @ 2011-09-02 1:10 UTC (permalink / raw)
To: sparclinux
On Wed, Aug 31, 2011 at 03:59:56PM -0400, David Miller wrote:
>
> There is a non-trivial problem with the device tree reported by your
> firmware, several PCI device nodes are reported multiple times.
>
> If you'll look 'isa' appears twice, and so does 'pmu'.
>
> This is a very serious issue.
>
> And that's what is causing all of these boot failures.
>
> I have two theories, either the Tulip card makes the firmware corrupt
> the device tree like this. Or, alternatively, there is some bug in
> the version of OBP installed on this machine.
>
> This really isn't a kernel bug. And if it worked in the past, it worked
> entirely by accident.
Thanks so much for the info! I finally have 3.0.3 booting normally.
First thing I did was update to the latest firmware, 4.17.1, which can
be found at http://ftp.sunet.se (the readme is here:
http://ftp.sunet.se/pub/security/vendor/sun/patches/all_unsigned/119235-01.README).
This was a bit of a chore because neither the SILO nor the Solaris
loader wanted to boot the firmware update. I had to setup a tftp
netboot server in order to patch the firmware.
But, that didn't fix the problem.
Next, I yanked the tulip card. That didn't fix the problem either.
Finally, I reset nvram by typing this at openprom's "ok" prompt:
set-defaults
A reset-all and... it works! I can boot 3.0.3!
Thanks for your patience in helping me get this machine going w/ Linux.
I'll add this info to the bugzilla report and close the bug.
thanks again,
Jim Faulkner
^ permalink raw reply [flat|nested] 18+ messages in thread