* [compat-wireless-3.1-rc1-1] rt2800usb crashes the machine @ 2011-08-23 9:07 Andreas Hartmann 2011-08-24 9:03 ` Stanislaw Gruszka 0 siblings, 1 reply; 6+ messages in thread From: Andreas Hartmann @ 2011-08-23 9:07 UTC (permalink / raw) To: linux-wireless Hello, using rt2800usb with a Linksys WUSB600N v2 (rt3572) crashes the complete machine (SMP, Core i5, linux 3.0) on unloading the module after using it for a short period of time: - 2 times netperf -t TCP_MAERTS -H host - 2 times netperf -t TCP_STREAM -H host The error message in /var/log/messages is: phy0 -> rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy, aborting After the crash, you have to hard reset the machine. BTW: The throughput to STA is about 4 MB/s. The throughput from STA is about 1 _k_B/s Kind regards, Andreas ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [compat-wireless-3.1-rc1-1] rt2800usb crashes the machine 2011-08-23 9:07 [compat-wireless-3.1-rc1-1] rt2800usb crashes the machine Andreas Hartmann @ 2011-08-24 9:03 ` Stanislaw Gruszka 2011-08-24 11:59 ` Andreas Hartmann 2011-08-24 12:21 ` Andreas Hartmann 0 siblings, 2 replies; 6+ messages in thread From: Stanislaw Gruszka @ 2011-08-24 9:03 UTC (permalink / raw) To: Andreas Hartmann; +Cc: linux-wireless On Tue, Aug 23, 2011 at 11:07:36AM +0200, Andreas Hartmann wrote: > using rt2800usb with a Linksys WUSB600N v2 (rt3572) crashes the complete > machine (SMP, Core i5, linux 3.0) on unloading the module after using it > for a short period of time: > - 2 times netperf -t TCP_MAERTS -H host > - 2 times netperf -t TCP_STREAM -H host > > The error message in /var/log/messages is: > > phy0 -> rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy, aborting > > After the crash, you have to hard reset the machine. Did you hibernate machine anytime before the rmmod ? If so, we have fix on wireless-testing tree: http://git.kernel.org/?p=linux/kernel/git/linville/wireless-testing.git;a=commitdiff;h=543cc38c8fe86deba4169977c61eb88491036837 Otherwise perhaps you could photo crash logs on virtual terminal (switched by Alt+Ctrl+F2 from X-window) or by using netconsole or kdump. Stanislaw ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [compat-wireless-3.1-rc1-1] rt2800usb crashes the machine 2011-08-24 9:03 ` Stanislaw Gruszka @ 2011-08-24 11:59 ` Andreas Hartmann 2011-08-24 12:21 ` Andreas Hartmann 1 sibling, 0 replies; 6+ messages in thread From: Andreas Hartmann @ 2011-08-24 11:59 UTC (permalink / raw) To: Stanislaw Gruszka; +Cc: linux-wireless Hello Stanislaw, thank you for spending your time for this problem! Am Wed, 24 Aug 2011 11:03:41 +0200 schrieb Stanislaw Gruszka <sgruszka@redhat.com>: > On Tue, Aug 23, 2011 at 11:07:36AM +0200, Andreas Hartmann wrote: > > using rt2800usb with a Linksys WUSB600N v2 (rt3572) crashes the complete > > machine (SMP, Core i5, linux 3.0) on unloading the module after using it > > for a short period of time: > > - 2 times netperf -t TCP_MAERTS -H host > > - 2 times netperf -t TCP_STREAM -H host > > > > The error message in /var/log/messages is: > > > > phy0 -> rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy, aborting > > > > After the crash, you have to hard reset the machine. > Did you hibernate machine anytime before the rmmod ? No, there was no suspend / resume done with this module at all. I think, the problem of this hang is located elsewhere. To get more information, I switched on debugging of the rt2x00-driver and did the tests again. During the tests, I get tons of these warnings in /var/log/messages: Aug 24 13:01:55 pc kernel: [22286.549510] phy0 -> rt2800usb_txdone_entry_check: Warning - TX status report missed for queue 2 entry 36 Aug 24 13:01:55 pc kernel: [22286.549530] phy0 -> rt2800usb_txdone_entry_check: Warning - TX status report missed for queue 2 entry 37 Aug 24 13:01:55 pc kernel: [22286.549546] phy0 -> rt2800usb_txdone_entry_check: Warning - TX status report missed for queue 2 entry 39 Aug 24 13:01:55 pc kernel: [22286.549560] phy0 -> rt2800usb_txdone_entry_check: Warning - TX status report missed for queue 2 entry 40 Aug 24 13:01:55 pc kernel: [22286.550511] phy0 -> rt2800usb_txdone_entry_check: Warning - TX status report missed for queue 2 entry 42 Aug 24 13:01:55 pc kernel: [22286.550749] phy0 -> rt2800usb_txdone_entry_check: Warning - TX status report missed for queue 2 entry 44 Aug 24 13:01:55 pc kernel: [22286.550766] phy0 -> rt2800usb_txdone_entry_check: Warning - TX status report missed for queue 2 entry 46 Aug 24 13:01:55 pc kernel: [22286.550780] phy0 -> rt2800usb_txdone_entry_check: Warning - TX status report missed for queue 2 entry 47 Aug 24 13:01:55 pc kernel: [22286.551756] phy0 -> rt2800usb_txdone_entry_check: Warning - TX status report missed for queue 2 entry 48 Aug 24 13:01:55 pc kernel: [22286.552006] phy0 -> rt2800usb_txdone_entry_check: Warning - TX status report missed for queue 2 entry 50 Aug 24 13:01:55 pc kernel: [22286.552032] phy0 -> rt2800usb_txdone_entry_check: Warning - TX status report missed for queue 2 entry 52 (about 144/s) Another entry is: Aug 24 12:59:46 pc kernel: [22157.608241] phy0 -> rt2x00usb_watchdog_tx_status: Warning - TX queue 0 status timed out, invoke forced tx handler The measured throughput is: - to STA (-> where rt2800usb runs) is about 4 MB/s. - from STA is about 1 _k_B/s. The Linksys WUSB600N V2 dongle should have a throughput of about 10 M/s in both directions! I think, if the handling of the queues is fixed, the problem of the hanging machine will be gone, too! If I should test some patches or if you want need some more information - please ask, I'll try to provide them! Kind regards, Andreas ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [compat-wireless-3.1-rc1-1] rt2800usb crashes the machine 2011-08-24 9:03 ` Stanislaw Gruszka 2011-08-24 11:59 ` Andreas Hartmann @ 2011-08-24 12:21 ` Andreas Hartmann 2011-08-25 16:11 ` Stanislaw Gruszka 1 sibling, 1 reply; 6+ messages in thread From: Andreas Hartmann @ 2011-08-24 12:21 UTC (permalink / raw) To: Stanislaw Gruszka; +Cc: linux-wireless Stanislaw Gruszka schrieb: > On Tue, Aug 23, 2011 at 11:07:36AM +0200, Andreas Hartmann wrote: >> using rt2800usb with a Linksys WUSB600N v2 (rt3572) crashes the complete >> machine (SMP, Core i5, linux 3.0) on unloading the module after using it >> for a short period of time: >> - 2 times netperf -t TCP_MAERTS -H host >> - 2 times netperf -t TCP_STREAM -H host >> >> The error message in /var/log/messages is: >> >> phy0 -> rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy, aborting >> >> After the crash, you have to hard reset the machine. [...] > Otherwise perhaps you could photo crash logs on virtual terminal > (switched by Alt+Ctrl+F2 from X-window) or by using netconsole or kdump. There is no crash dump - the machine just hangs up itself and the fan is getting loader and loader (until max), because the machine is getting hot more and more. Kind regards, Andreas ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [compat-wireless-3.1-rc1-1] rt2800usb crashes the machine 2011-08-24 12:21 ` Andreas Hartmann @ 2011-08-25 16:11 ` Stanislaw Gruszka 2011-08-26 6:56 ` Andreas Hartmann 0 siblings, 1 reply; 6+ messages in thread From: Stanislaw Gruszka @ 2011-08-25 16:11 UTC (permalink / raw) To: Andreas Hartmann; +Cc: linux-wireless On Wed, Aug 24, 2011 at 02:21:51PM +0200, Andreas Hartmann wrote: > Stanislaw Gruszka schrieb: > > On Tue, Aug 23, 2011 at 11:07:36AM +0200, Andreas Hartmann wrote: > >> using rt2800usb with a Linksys WUSB600N v2 (rt3572) crashes the complete > >> machine (SMP, Core i5, linux 3.0) on unloading the module after using it > >> for a short period of time: > >> - 2 times netperf -t TCP_MAERTS -H host > >> - 2 times netperf -t TCP_STREAM -H host > >> > >> The error message in /var/log/messages is: > >> > >> phy0 -> rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy, aborting > >> > >> After the crash, you have to hard reset the machine. > > [...] > > > Otherwise perhaps you could photo crash logs on virtual terminal > > (switched by Alt+Ctrl+F2 from X-window) or by using netconsole or kdump. > > There is no crash dump - the machine just hangs up itself and the fan is > getting loader and loader (until max), because the machine is getting > hot more and more. Kernel should generate some information when it hangs, at least when debug options are enabled like CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_OBJECTS, CONFIG_LOCKUP_DETECTOR, ... I just realized that compat-wireless-3.1-rc1-1, does not contain some rt2x00 fixes: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=4b1bfb7d2d125af6653d6c2305356b2677f79dc6 http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=df71c9cfceea801e7e26e2c74241758ef9c042e5 http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=674db1344443204b6ce3293f2df8fd1b7665deea Try to apply them first, or use compat-wireless-next. If they not help just try to reconfigure kernel to print messages on lockup. Note, I'm not able to reproduce hangup using steps you provide. However I have bad performance, between 6 and 16 Mbits/s measured by netperf on connection between two rt2800usb stations through WRT160NL AP. I'm going to look at this problem when I'll have a chance. Stanislaw ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [compat-wireless-3.1-rc1-1] rt2800usb crashes the machine 2011-08-25 16:11 ` Stanislaw Gruszka @ 2011-08-26 6:56 ` Andreas Hartmann 0 siblings, 0 replies; 6+ messages in thread From: Andreas Hartmann @ 2011-08-26 6:56 UTC (permalink / raw) To: Stanislaw Gruszka; +Cc: linux-wireless Am Thu, 25 Aug 2011 18:11:04 +0200 schrieb Stanislaw Gruszka <sgruszka@redhat.com>: > On Wed, Aug 24, 2011 at 02:21:51PM +0200, Andreas Hartmann wrote: > > Stanislaw Gruszka schrieb: > > > On Tue, Aug 23, 2011 at 11:07:36AM +0200, Andreas Hartmann wrote: > > >> using rt2800usb with a Linksys WUSB600N v2 (rt3572) crashes the complete > > >> machine (SMP, Core i5, linux 3.0) on unloading the module after using it > > >> for a short period of time: > > >> - 2 times netperf -t TCP_MAERTS -H host > > >> - 2 times netperf -t TCP_STREAM -H host > > >> > > >> The error message in /var/log/messages is: > > >> > > >> phy0 -> rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy, aborting > > >> > > >> After the crash, you have to hard reset the machine. > > > > [...] > > > > > Otherwise perhaps you could photo crash logs on virtual terminal > > > (switched by Alt+Ctrl+F2 from X-window) or by using netconsole or kdump. > > > > There is no crash dump - the machine just hangs up itself and the fan is > > getting loader and loader (until max), because the machine is getting > > hot more and more. > > Kernel should generate some information when it hangs, at least when > debug options are enabled like CONFIG_DEBUG_SPINLOCK, > CONFIG_DEBUG_OBJECTS, CONFIG_LOCKUP_DETECTOR, ... > > I just realized that compat-wireless-3.1-rc1-1, does not contain some > rt2x00 fixes: > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=4b1bfb7d2d125af6653d6c2305356b2677f79dc6 > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=df71c9cfceea801e7e26e2c74241758ef9c042e5 > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=674db1344443204b6ce3293f2df8fd1b7665deea > > Try to apply them first, or use compat-wireless-next. If they not help > just try to reconfigure kernel to print messages on lockup. I applied your patches (and the suspend patch) and got the following throughput with a little luck (on a core i5): TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to host (1.1.1.1) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.17 33.48 TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to host (1.1.1.1) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.07 73.48 TCP SENDFILE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to host (1.1.1.1) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.35 32.08 These values could be seen, after the wlan stack has been reloaded after the first load. This is necessary, because the transfer stalled after a few seconds after the first load of the module. The system load on one core during the test was 100%. The latency (ping) was about 5 ms. I did the same test with a single core CPU (Celeron M). I could see the same high CPU load during data transfer. TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to host (1.1.1.1) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.30 30.61 TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to host (1.1.1.6) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.09 63.65 TCP SENDFILE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to host (1.1.1.6) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.50 31.17 The latency on the single core machine was 0,5 ms (10 times less!!). Oh, there are two more differences between the single and multi core machine: the single core machine runs with linux 2.6.37.6-0.5-desktop (32 bit), the multi core machine with 3.0.0-39-desktop (64 bit). Anyway, I could see on both machines suddenly stalled transfers like these: TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to host (1.1.1.1) port 0 AF_INET send_tcp_maerts: data recv error: Interrupted system call len was -1 Sometimes, it took long time until the network stack was usable again or I even had to reload the modules. The 144/s status reports (see my other mail in this thread) are not gone, if DEBUG option was set in config.mk. The throughput during a netperf run is very unsteady. During TCP_MAERTS e.g., it alternates heavily between 0 and 14 M/s (seen with xosview +n). During the tests, I could see few errors like this in messages: phy0 -> rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy, aborting. With the legacy driver, I'm getting _constant_ throughput until 16 M/s for TCP_MAERST and until 10 M/s for TCP_STREAM or TCP_SENDFILE at the same place. The load during these transfers is 0 - yes, it's really 0.0 - even with the Celeron M machine. > Note, I'm not able to reproduce hangup using steps you provide. I couldn't reproduce the mentioned hang with your patches. The hang came up during my first tests without your patches if the DEBUG option for rt2800usb in the config.mk was switched off! As long as it was switched on, the machine didn't hang. > However > I have bad performance, between 6 and 16 Mbits/s measured by netperf > on connection between two rt2800usb stations through WRT160NL AP. > I'm going to look at this problem when I'll have a chance. Well, that's the real problem (here)! It would be very great if this could be fixed. There must be something really broken, if one CPU is completely used for network data transfer. After all these problems shown up here, I think that it is more or less fortune, if the network does work at all (if it's getting stressed). I can imagine, that on other machines and other terms, the machine could even crash or hang. As long as the network is mainly idle (just used for a slow internet line or for ssh -X e.g.), I could see no problem. I didn't test suspend / resume. If I want to copy big files or try to do something like backup / restore, I can be pretty sure to run into problems, because the connection isn't stable at all on load. Therefore I really appreciate a fix for this problem! You can send it to me, if you have one - I'll test it! Thank you for your time and work! Andreas ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-08-26 6:56 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2011-08-23 9:07 [compat-wireless-3.1-rc1-1] rt2800usb crashes the machine Andreas Hartmann 2011-08-24 9:03 ` Stanislaw Gruszka 2011-08-24 11:59 ` Andreas Hartmann 2011-08-24 12:21 ` Andreas Hartmann 2011-08-25 16:11 ` Stanislaw Gruszka 2011-08-26 6:56 ` Andreas Hartmann
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.