* [PATCH] input/mc13xxx_ts.c: Add support for mc13892
@ 2011-09-26 14:57 Uwe Kleine-König
2011-09-26 17:54 ` Dmitry Torokhov
2011-09-28 18:51 ` [PATCH v2] input/mc13783_ts: " Uwe Kleine-König
0 siblings, 2 replies; 3+ messages in thread
From: Uwe Kleine-König @ 2011-09-26 14:57 UTC (permalink / raw)
To: linux-input; +Cc: Dmitry Torokhov, David Jander
The mc13892 has almost the same touchscreen controller as the mc13783.
This patch adds support for mc13892.
Based on an earlier patch by David Jander.
Cc: David Jander <david@protonic.nl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
drivers/input/touchscreen/Kconfig | 10 +-
drivers/input/touchscreen/Makefile | 2 +-
drivers/input/touchscreen/mc13783_ts.c | 259 -----------------------------
drivers/input/touchscreen/mc13xxx_ts.c | 282 ++++++++++++++++++++++++++++++++
4 files changed, 288 insertions(+), 265 deletions(-)
delete mode 100644 drivers/input/touchscreen/mc13783_ts.c
create mode 100644 drivers/input/touchscreen/mc13xxx_ts.c
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index cabd9e5..3daeae6 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -548,17 +548,17 @@ config TOUCHSCREEN_USB_COMPOSITE
To compile this driver as a module, choose M here: the
module will be called usbtouchscreen.
-config TOUCHSCREEN_MC13783
- tristate "Freescale MC13783 touchscreen input driver"
- depends on MFD_MC13783
+config TOUCHSCREEN_MC13XXX
+ tristate "Freescale MC13783/MC13892 touchscreen input driver"
+ depends on MFD_MC13XXX
help
- Say Y here if you have an Freescale MC13783 PMIC on your
+ Say Y here if you have an Freescale MC13783/MC13892 PMIC on your
board and want to use its touchscreen
If unsure, say N.
To compile this driver as a module, choose M here: the
- module will be called mc13783_ts.
+ module will be called mc13xxx_ts.
config TOUCHSCREEN_USB_EGALAX
default y
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 282d6f7..2e90c01 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -28,7 +28,7 @@ obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o
obj-$(CONFIG_TOUCHSCREEN_LPC32XX) += lpc32xx_ts.o
obj-$(CONFIG_TOUCHSCREEN_MAX11801) += max11801_ts.o
-obj-$(CONFIG_TOUCHSCREEN_MC13783) += mc13783_ts.o
+obj-$(CONFIG_TOUCHSCREEN_MC13XXX) += mc13xxx_ts.o
obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o
obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o
obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c
deleted file mode 100644
index ede0274..0000000
--- a/drivers/input/touchscreen/mc13783_ts.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- * Driver for the Freescale Semiconductor MC13783 touchscreen.
- *
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Sascha Hauer, Pengutronix
- *
- * Initial development of this code was funded by
- * Phytec Messtechnik GmbH, http://www.phytec.de/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/platform_device.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/input.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-
-#define MC13783_TS_NAME "mc13783-ts"
-
-#define DEFAULT_SAMPLE_TOLERANCE 300
-
-static unsigned int sample_tolerance = DEFAULT_SAMPLE_TOLERANCE;
-module_param(sample_tolerance, uint, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(sample_tolerance,
- "If the minimal and maximal value read out for one axis (out "
- "of three) differ by this value (default: "
- __stringify(DEFAULT_SAMPLE_TOLERANCE) ") or more, the reading "
- "is supposed to be wrong and is discarded. Set to 0 to "
- "disable this check.");
-
-struct mc13783_ts_priv {
- struct input_dev *idev;
- struct mc13xxx *mc13xxx;
- struct delayed_work work;
- struct workqueue_struct *workq;
- unsigned int sample[4];
-};
-
-static irqreturn_t mc13783_ts_handler(int irq, void *data)
-{
- struct mc13783_ts_priv *priv = data;
-
- mc13xxx_irq_ack(priv->mc13xxx, irq);
-
- /*
- * Kick off reading coordinates. Note that if work happens already
- * be queued for future execution (it rearms itself) it will not
- * be rescheduled for immediate execution here. However the rearm
- * delay is HZ / 50 which is acceptable.
- */
- queue_delayed_work(priv->workq, &priv->work, 0);
-
- return IRQ_HANDLED;
-}
-
-#define sort3(a0, a1, a2) ({ \
- if (a0 > a1) \
- swap(a0, a1); \
- if (a1 > a2) \
- swap(a1, a2); \
- if (a0 > a1) \
- swap(a0, a1); \
- })
-
-static void mc13783_ts_report_sample(struct mc13783_ts_priv *priv)
-{
- struct input_dev *idev = priv->idev;
- int x0, x1, x2, y0, y1, y2;
- int cr0, cr1;
-
- /*
- * the values are 10-bit wide only, but the two least significant
- * bits are for future 12 bit use and reading yields 0
- */
- x0 = priv->sample[0] & 0xfff;
- x1 = priv->sample[1] & 0xfff;
- x2 = priv->sample[2] & 0xfff;
- y0 = priv->sample[3] & 0xfff;
- y1 = (priv->sample[0] >> 12) & 0xfff;
- y2 = (priv->sample[1] >> 12) & 0xfff;
- cr0 = (priv->sample[2] >> 12) & 0xfff;
- cr1 = (priv->sample[3] >> 12) & 0xfff;
-
- dev_dbg(&idev->dev,
- "x: (% 4d,% 4d,% 4d) y: (% 4d, % 4d,% 4d) cr: (% 4d, % 4d)\n",
- x0, x1, x2, y0, y1, y2, cr0, cr1);
-
- sort3(x0, x1, x2);
- sort3(y0, y1, y2);
-
- cr0 = (cr0 + cr1) / 2;
-
- if (!cr0 || !sample_tolerance ||
- (x2 - x0 < sample_tolerance &&
- y2 - y0 < sample_tolerance)) {
- /* report the median coordinate and average pressure */
- if (cr0) {
- input_report_abs(idev, ABS_X, x1);
- input_report_abs(idev, ABS_Y, y1);
-
- dev_dbg(&idev->dev, "report (%d, %d, %d)\n",
- x1, y1, 0x1000 - cr0);
- queue_delayed_work(priv->workq, &priv->work, HZ / 50);
- } else
- dev_dbg(&idev->dev, "report release\n");
-
- input_report_abs(idev, ABS_PRESSURE,
- cr0 ? 0x1000 - cr0 : cr0);
- input_report_key(idev, BTN_TOUCH, cr0);
- input_sync(idev);
- } else
- dev_dbg(&idev->dev, "discard event\n");
-}
-
-static void mc13783_ts_work(struct work_struct *work)
-{
- struct mc13783_ts_priv *priv =
- container_of(work, struct mc13783_ts_priv, work.work);
- unsigned int mode = MC13XXX_ADC_MODE_TS;
- unsigned int channel = 12;
-
- if (mc13xxx_adc_do_conversion(priv->mc13xxx,
- mode, channel, priv->sample) == 0)
- mc13783_ts_report_sample(priv);
-}
-
-static int mc13783_ts_open(struct input_dev *dev)
-{
- struct mc13783_ts_priv *priv = input_get_drvdata(dev);
- int ret;
-
- mc13xxx_lock(priv->mc13xxx);
-
- mc13xxx_irq_ack(priv->mc13xxx, MC13XXX_IRQ_TS);
-
- ret = mc13xxx_irq_request(priv->mc13xxx, MC13XXX_IRQ_TS,
- mc13783_ts_handler, MC13783_TS_NAME, priv);
- if (ret)
- goto out;
-
- ret = mc13xxx_reg_rmw(priv->mc13xxx, MC13XXX_ADC0,
- MC13XXX_ADC0_TSMOD_MASK, MC13XXX_ADC0_TSMOD0);
- if (ret)
- mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TS, priv);
-out:
- mc13xxx_unlock(priv->mc13xxx);
- return ret;
-}
-
-static void mc13783_ts_close(struct input_dev *dev)
-{
- struct mc13783_ts_priv *priv = input_get_drvdata(dev);
-
- mc13xxx_lock(priv->mc13xxx);
- mc13xxx_reg_rmw(priv->mc13xxx, MC13XXX_ADC0,
- MC13XXX_ADC0_TSMOD_MASK, 0);
- mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TS, priv);
- mc13xxx_unlock(priv->mc13xxx);
-
- cancel_delayed_work_sync(&priv->work);
-}
-
-static int __init mc13783_ts_probe(struct platform_device *pdev)
-{
- struct mc13783_ts_priv *priv;
- struct input_dev *idev;
- int ret = -ENOMEM;
-
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- idev = input_allocate_device();
- if (!priv || !idev)
- goto err_free_mem;
-
- INIT_DELAYED_WORK(&priv->work, mc13783_ts_work);
- priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
- priv->idev = idev;
-
- /*
- * We need separate workqueue because mc13783_adc_do_conversion
- * uses keventd and thus would deadlock.
- */
- priv->workq = create_singlethread_workqueue("mc13783_ts");
- if (!priv->workq)
- goto err_free_mem;
-
- idev->name = MC13783_TS_NAME;
- idev->dev.parent = &pdev->dev;
-
- idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
- input_set_abs_params(idev, ABS_X, 0, 0xfff, 0, 0);
- input_set_abs_params(idev, ABS_Y, 0, 0xfff, 0, 0);
- input_set_abs_params(idev, ABS_PRESSURE, 0, 0xfff, 0, 0);
-
- idev->open = mc13783_ts_open;
- idev->close = mc13783_ts_close;
-
- input_set_drvdata(idev, priv);
-
- ret = input_register_device(priv->idev);
- if (ret) {
- dev_err(&pdev->dev,
- "register input device failed with %d\n", ret);
- goto err_destroy_wq;
- }
-
- platform_set_drvdata(pdev, priv);
- return 0;
-
-err_destroy_wq:
- destroy_workqueue(priv->workq);
-err_free_mem:
- input_free_device(idev);
- kfree(priv);
- return ret;
-}
-
-static int __devexit mc13783_ts_remove(struct platform_device *pdev)
-{
- struct mc13783_ts_priv *priv = platform_get_drvdata(pdev);
-
- platform_set_drvdata(pdev, NULL);
-
- destroy_workqueue(priv->workq);
- input_unregister_device(priv->idev);
- kfree(priv);
-
- return 0;
-}
-
-static struct platform_driver mc13783_ts_driver = {
- .remove = __devexit_p(mc13783_ts_remove),
- .driver = {
- .owner = THIS_MODULE,
- .name = MC13783_TS_NAME,
- },
-};
-
-static int __init mc13783_ts_init(void)
-{
- return platform_driver_probe(&mc13783_ts_driver, &mc13783_ts_probe);
-}
-module_init(mc13783_ts_init);
-
-static void __exit mc13783_ts_exit(void)
-{
- platform_driver_unregister(&mc13783_ts_driver);
-}
-module_exit(mc13783_ts_exit);
-
-MODULE_DESCRIPTION("MC13783 input touchscreen driver");
-MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" MC13783_TS_NAME);
diff --git a/drivers/input/touchscreen/mc13xxx_ts.c b/drivers/input/touchscreen/mc13xxx_ts.c
new file mode 100644
index 0000000..2eda31b
--- /dev/null
+++ b/drivers/input/touchscreen/mc13xxx_ts.c
@@ -0,0 +1,282 @@
+/*
+ * Driver for the Freescale Semiconductor MC13783 touchscreen.
+ *
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+
+#define DRIVER_NAME "mc13xxx-ts"
+
+#define DEFAULT_SAMPLE_TOLERANCE 300
+
+static unsigned int sample_tolerance = DEFAULT_SAMPLE_TOLERANCE;
+module_param(sample_tolerance, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(sample_tolerance,
+ "If the minimal and maximal value read out for one axis (out "
+ "of three) differ by this value (default: "
+ __stringify(DEFAULT_SAMPLE_TOLERANCE) ") or more, the reading "
+ "is supposed to be wrong and is discarded. Set to 0 to "
+ "disable this check.");
+
+#define MC13XXX_TWO_SAMPLES 1
+
+struct mc13783_ts_priv {
+ struct platform_device *pdev;
+ struct input_dev *idev;
+ struct mc13xxx *mc13xxx;
+ struct delayed_work work;
+ struct workqueue_struct *workq;
+ unsigned int sample[4];
+};
+
+static irqreturn_t mc13783_ts_handler(int irq, void *data)
+{
+ struct mc13783_ts_priv *priv = data;
+
+ mc13xxx_irq_ack(priv->mc13xxx, irq);
+
+ /*
+ * Kick off reading coordinates. Note that if work happens already
+ * be queued for future execution (it rearms itself) it will not
+ * be rescheduled for immediate execution here. However the rearm
+ * delay is HZ / 50 which is acceptable.
+ */
+ queue_delayed_work(priv->workq, &priv->work, 0);
+
+ return IRQ_HANDLED;
+}
+
+#define sort3(a0, a1, a2) ({ \
+ if (a0 > a1) \
+ swap(a0, a1); \
+ if (a1 > a2) \
+ swap(a1, a2); \
+ if (a0 > a1) \
+ swap(a0, a1); \
+ })
+
+static void mc13783_ts_report_sample(struct mc13783_ts_priv *priv)
+{
+ struct platform_device *pdev = priv->pdev;
+ struct input_dev *idev = priv->idev;
+ int x0, x1, x2, y0, y1, y2;
+ int cr0, cr1;
+
+ /*
+ * the values are 10-bit wide only, but the two least significant
+ * bits are for future 12 bit use and reading yields 0
+ */
+ x0 = priv->sample[0] & 0xfff;
+ x1 = priv->sample[1] & 0xfff;
+ x2 = priv->sample[2] & 0xfff;
+ y0 = priv->sample[3] & 0xfff;
+ y1 = (priv->sample[0] >> 12) & 0xfff;
+ y2 = (priv->sample[1] >> 12) & 0xfff;
+ cr0 = (priv->sample[2] >> 12) & 0xfff;
+ cr1 = (priv->sample[3] >> 12) & 0xfff;
+
+ /* On the mc13892, x2 and y2 are invalid */
+ if (platform_get_device_id(pdev)->driver_data & MC13XXX_TWO_SAMPLES) {
+ /* better use x2 = (x1 + x0) / 2 ? */
+ x2 = x1;
+ y2 = y1;
+ }
+
+ dev_dbg(&idev->dev,
+ "x: (% 4d,% 4d,% 4d) y: (% 4d, % 4d,% 4d) cr: (% 4d, % 4d)\n",
+ x0, x1, x2, y0, y1, y2, cr0, cr1);
+
+ sort3(x0, x1, x2);
+ sort3(y0, y1, y2);
+
+ cr0 = (cr0 + cr1) / 2;
+
+ if (!cr0 || !sample_tolerance ||
+ (x2 - x0 < sample_tolerance &&
+ y2 - y0 < sample_tolerance)) {
+ /* report the median coordinate and average pressure */
+ if (cr0) {
+ input_report_abs(idev, ABS_X, x1);
+ input_report_abs(idev, ABS_Y, y1);
+
+ dev_dbg(&idev->dev, "report (%d, %d, %d)\n",
+ x1, y1, 0x1000 - cr0);
+ queue_delayed_work(priv->workq, &priv->work, HZ / 50);
+ } else
+ dev_dbg(&idev->dev, "report release\n");
+
+ input_report_abs(idev, ABS_PRESSURE,
+ cr0 ? 0x1000 - cr0 : cr0);
+ input_report_key(idev, BTN_TOUCH, cr0);
+ input_sync(idev);
+ } else
+ dev_dbg(&idev->dev, "discard event\n");
+}
+
+static void mc13783_ts_work(struct work_struct *work)
+{
+ struct mc13783_ts_priv *priv =
+ container_of(work, struct mc13783_ts_priv, work.work);
+ unsigned int mode = MC13XXX_ADC_MODE_TS;
+ unsigned int channel = 12;
+
+ if (mc13xxx_adc_do_conversion(priv->mc13xxx,
+ mode, channel, priv->sample) == 0)
+ mc13783_ts_report_sample(priv);
+}
+
+static int mc13783_ts_open(struct input_dev *dev)
+{
+ struct mc13783_ts_priv *priv = input_get_drvdata(dev);
+ int ret;
+
+ mc13xxx_lock(priv->mc13xxx);
+
+ mc13xxx_irq_ack(priv->mc13xxx, MC13XXX_IRQ_TS);
+
+ ret = mc13xxx_irq_request(priv->mc13xxx, MC13XXX_IRQ_TS,
+ mc13783_ts_handler, DRIVER_NAME, priv);
+ if (ret)
+ goto out;
+
+ ret = mc13xxx_reg_rmw(priv->mc13xxx, MC13XXX_ADC0,
+ MC13XXX_ADC0_TSMOD_MASK, MC13XXX_ADC0_TSMOD0);
+ if (ret)
+ mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TS, priv);
+out:
+ mc13xxx_unlock(priv->mc13xxx);
+ return ret;
+}
+
+static void mc13783_ts_close(struct input_dev *dev)
+{
+ struct mc13783_ts_priv *priv = input_get_drvdata(dev);
+
+ mc13xxx_lock(priv->mc13xxx);
+ mc13xxx_reg_rmw(priv->mc13xxx, MC13XXX_ADC0,
+ MC13XXX_ADC0_TSMOD_MASK, 0);
+ mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TS, priv);
+ mc13xxx_unlock(priv->mc13xxx);
+
+ cancel_delayed_work_sync(&priv->work);
+}
+
+static int __init mc13783_ts_probe(struct platform_device *pdev)
+{
+ struct mc13783_ts_priv *priv;
+ struct input_dev *idev;
+ int ret = -ENOMEM;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ idev = input_allocate_device();
+ if (!priv || !idev)
+ goto err_free_mem;
+
+ INIT_DELAYED_WORK(&priv->work, mc13783_ts_work);
+ priv->pdev = pdev;
+ priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
+ priv->idev = idev;
+
+ /*
+ * We need separate workqueue because mc13783_adc_do_conversion
+ * uses keventd and thus would deadlock.
+ */
+ priv->workq = create_singlethread_workqueue(pdev->name);
+ if (!priv->workq)
+ goto err_free_mem;
+
+ idev->name = pdev->name;
+ idev->dev.parent = &pdev->dev;
+
+ idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ input_set_abs_params(idev, ABS_X, 0, 0xfff, 0, 0);
+ input_set_abs_params(idev, ABS_Y, 0, 0xfff, 0, 0);
+ input_set_abs_params(idev, ABS_PRESSURE, 0, 0xfff, 0, 0);
+
+ idev->open = mc13783_ts_open;
+ idev->close = mc13783_ts_close;
+
+ input_set_drvdata(idev, priv);
+
+ ret = input_register_device(priv->idev);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "register input device failed with %d\n", ret);
+ goto err_destroy_wq;
+ }
+
+ platform_set_drvdata(pdev, priv);
+ return 0;
+
+err_destroy_wq:
+ destroy_workqueue(priv->workq);
+err_free_mem:
+ input_free_device(idev);
+ kfree(priv);
+ return ret;
+}
+
+static int __devexit mc13783_ts_remove(struct platform_device *pdev)
+{
+ struct mc13783_ts_priv *priv = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ destroy_workqueue(priv->workq);
+ input_unregister_device(priv->idev);
+ kfree(priv);
+
+ return 0;
+}
+static const struct platform_device_id mc13xxx_ts_idtable[] = {
+ {
+ .name = "mc13783-ts",
+ }, {
+ .name = "mc13892-ts",
+ .driver_data = MC13XXX_TWO_SAMPLES,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, mc13xxx_ts_idtable);
+
+static struct platform_driver mc13783_ts_driver = {
+ .id_table = mc13xxx_ts_idtable,
+ .remove = __devexit_p(mc13783_ts_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ },
+};
+
+static int __init mc13783_ts_init(void)
+{
+ return platform_driver_probe(&mc13783_ts_driver, &mc13783_ts_probe);
+}
+module_init(mc13783_ts_init);
+
+static void __exit mc13783_ts_exit(void)
+{
+ platform_driver_unregister(&mc13783_ts_driver);
+}
+module_exit(mc13783_ts_exit);
+
+MODULE_DESCRIPTION("MC13783 input touchscreen driver");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_LICENSE("GPL v2");
--
1.7.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] input/mc13xxx_ts.c: Add support for mc13892
2011-09-26 14:57 [PATCH] input/mc13xxx_ts.c: Add support for mc13892 Uwe Kleine-König
@ 2011-09-26 17:54 ` Dmitry Torokhov
2011-09-28 18:51 ` [PATCH v2] input/mc13783_ts: " Uwe Kleine-König
1 sibling, 0 replies; 3+ messages in thread
From: Dmitry Torokhov @ 2011-09-26 17:54 UTC (permalink / raw)
To: Uwe Kleine-König; +Cc: linux-input, David Jander
Hi Uwe,
On Mon, Sep 26, 2011 at 04:57:37PM +0200, Uwe Kleine-König wrote:
> The mc13892 has almost the same touchscreen controller as the mc13783.
> This patch adds support for mc13892.
>
> Based on an earlier patch by David Jander.
>
> Cc: David Jander <david@protonic.nl>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
> drivers/input/touchscreen/Kconfig | 10 +-
> drivers/input/touchscreen/Makefile | 2 +-
> drivers/input/touchscreen/mc13783_ts.c | 259 -----------------------------
> drivers/input/touchscreen/mc13xxx_ts.c | 282 ++++++++++++++++++++++++++++++++
> 4 files changed, 288 insertions(+), 265 deletions(-)
> delete mode 100644 drivers/input/touchscreen/mc13783_ts.c
> create mode 100644 drivers/input/touchscreen/mc13xxx_ts.c
This rename hides completely what was done to the driver to support the
new chip. I also do not think that rename is that useful; I think if we
simply update Kconfig text an driver description to reflectthe fact that
we now support 2 chips that shoudl be enough.
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v2] input/mc13783_ts: Add support for mc13892
2011-09-26 14:57 [PATCH] input/mc13xxx_ts.c: Add support for mc13892 Uwe Kleine-König
2011-09-26 17:54 ` Dmitry Torokhov
@ 2011-09-28 18:51 ` Uwe Kleine-König
1 sibling, 0 replies; 3+ messages in thread
From: Uwe Kleine-König @ 2011-09-28 18:51 UTC (permalink / raw)
To: linux-input; +Cc: Dmitry Torokhov, David Jander, kernel, David Jander
From: David Jander <david.jander@protonic.nl>
The mc13892 has almost the same touchscreen controller as the mc13783.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
changes since (implicit) v1:
- undo renaming
- report average of the two samples on mc13892 instead of the first.
- some minor cosmetic changes
- set author to David as he did the technical work, I only cleaned up.
drivers/input/touchscreen/Kconfig | 8 +++---
drivers/input/touchscreen/mc13783_ts.c | 35 ++++++++++++++++++++++++++-----
2 files changed, 33 insertions(+), 10 deletions(-)
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index cabd9e5..aeece83 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -549,11 +549,11 @@ config TOUCHSCREEN_USB_COMPOSITE
module will be called usbtouchscreen.
config TOUCHSCREEN_MC13783
- tristate "Freescale MC13783 touchscreen input driver"
- depends on MFD_MC13783
+ tristate "Freescale MC13783/MC13892 touchscreen input driver"
+ depends on MFD_MC13XXX
help
- Say Y here if you have an Freescale MC13783 PMIC on your
- board and want to use its touchscreen
+ Say Y here if you have an Freescale MC13783/MC13892 PMIC on your
+ board and want to use its touchscreen.
If unsure, say N.
diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c
index ede0274..afa62cf 100644
--- a/drivers/input/touchscreen/mc13783_ts.c
+++ b/drivers/input/touchscreen/mc13783_ts.c
@@ -20,7 +20,7 @@
#include <linux/slab.h>
#include <linux/init.h>
-#define MC13783_TS_NAME "mc13783-ts"
+#define DRIVER_NAME "mc13783-ts"
#define DEFAULT_SAMPLE_TOLERANCE 300
@@ -33,7 +33,10 @@ MODULE_PARM_DESC(sample_tolerance,
"is supposed to be wrong and is discarded. Set to 0 to "
"disable this check.");
+#define MC13783_TS_TWO_SAMPLES 1
+
struct mc13783_ts_priv {
+ struct platform_device *pdev;
struct input_dev *idev;
struct mc13xxx *mc13xxx;
struct delayed_work work;
@@ -69,6 +72,7 @@ static irqreturn_t mc13783_ts_handler(int irq, void *data)
static void mc13783_ts_report_sample(struct mc13783_ts_priv *priv)
{
+ struct platform_device *pdev = priv->pdev;
struct input_dev *idev = priv->idev;
int x0, x1, x2, y0, y1, y2;
int cr0, cr1;
@@ -86,6 +90,13 @@ static void mc13783_ts_report_sample(struct mc13783_ts_priv *priv)
cr0 = (priv->sample[2] >> 12) & 0xfff;
cr1 = (priv->sample[3] >> 12) & 0xfff;
+ /* On the mc13892, x2 and y2 are invalid */
+ if (platform_get_device_id(pdev)->driver_data &
+ MC13783_TS_TWO_SAMPLES) {
+ x2 = (x1 + x0) / 2;
+ y2 = (y1 + y0) / 2;
+ }
+
dev_dbg(&idev->dev,
"x: (% 4d,% 4d,% 4d) y: (% 4d, % 4d,% 4d) cr: (% 4d, % 4d)\n",
x0, x1, x2, y0, y1, y2, cr0, cr1);
@@ -139,7 +150,7 @@ static int mc13783_ts_open(struct input_dev *dev)
mc13xxx_irq_ack(priv->mc13xxx, MC13XXX_IRQ_TS);
ret = mc13xxx_irq_request(priv->mc13xxx, MC13XXX_IRQ_TS,
- mc13783_ts_handler, MC13783_TS_NAME, priv);
+ mc13783_ts_handler, DRIVER_NAME, priv);
if (ret)
goto out;
@@ -177,6 +188,7 @@ static int __init mc13783_ts_probe(struct platform_device *pdev)
goto err_free_mem;
INIT_DELAYED_WORK(&priv->work, mc13783_ts_work);
+ priv->pdev = pdev;
priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
priv->idev = idev;
@@ -184,11 +196,11 @@ static int __init mc13783_ts_probe(struct platform_device *pdev)
* We need separate workqueue because mc13783_adc_do_conversion
* uses keventd and thus would deadlock.
*/
- priv->workq = create_singlethread_workqueue("mc13783_ts");
+ priv->workq = create_singlethread_workqueue(pdev->name);
if (!priv->workq)
goto err_free_mem;
- idev->name = MC13783_TS_NAME;
+ idev->name = pdev->name;
idev->dev.parent = &pdev->dev;
idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
@@ -232,12 +244,24 @@ static int __devexit mc13783_ts_remove(struct platform_device *pdev)
return 0;
}
+static const struct platform_device_id mc13783_ts_idtable[] = {
+ {
+ .name = "mc13783-ts",
+ }, {
+ .name = "mc13892-ts",
+ .driver_data = MC13783_TS_TWO_SAMPLES,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, mc13783_ts_idtable);
static struct platform_driver mc13783_ts_driver = {
+ .id_table = mc13783_ts_idtable,
.remove = __devexit_p(mc13783_ts_remove),
.driver = {
.owner = THIS_MODULE,
- .name = MC13783_TS_NAME,
+ .name = DRIVER_NAME,
},
};
@@ -256,4 +280,3 @@ module_exit(mc13783_ts_exit);
MODULE_DESCRIPTION("MC13783 input touchscreen driver");
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" MC13783_TS_NAME);
--
1.7.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-09-28 18:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-09-26 14:57 [PATCH] input/mc13xxx_ts.c: Add support for mc13892 Uwe Kleine-König
2011-09-26 17:54 ` Dmitry Torokhov
2011-09-28 18:51 ` [PATCH v2] input/mc13783_ts: " Uwe Kleine-König
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.