* [U-Boot] [PATCH] MX5: Make IPU display output and pixel format configurable
@ 2011-09-27 12:09 Marek Vasut
2011-09-27 12:22 ` Fabio Estevam
` (2 more replies)
0 siblings, 3 replies; 11+ messages in thread
From: Marek Vasut @ 2011-09-27 12:09 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
---
drivers/video/mxc_ipuv3_fb.c | 14 ++++++++++++--
1 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c
index a66981c..c4443e8 100644
--- a/drivers/video/mxc_ipuv3_fb.c
+++ b/drivers/video/mxc_ipuv3_fb.c
@@ -42,6 +42,16 @@
DECLARE_GLOBAL_DATA_PTR;
+/* Use DISP #1 by default. */
+#ifndef CONFIG_VIDEO_MX5_OUTPUT
+#define CONFIG_VIDEO_MX5_OUTPUT 0
+#endif
+
+/* Use RGB666 pixel format by default. */
+#ifndef CONFIG_VIDEO_MX5_PIXFMT
+#define CONFIG_VIDEO_MX5_PIXFMT IPU_PIX_FMT_RGB666
+#endif
+
void *lcd_base; /* Start of framebuffer memory */
void *lcd_console_address; /* Start of console buffer */
@@ -550,7 +560,7 @@ static int mxcfb_probe(u32 interface_pix_fmt, struct fb_videomode *mode)
mxcfbi->blank = FB_BLANK_POWERDOWN;
}
- mxcfbi->ipu_di = 0;
+ mxcfbi->ipu_di = CONFIG_VIDEO_MX5_OUTPUT;
ipu_disp_set_global_alpha(mxcfbi->ipu_ch, 1, 0x80);
ipu_disp_set_color_key(mxcfbi->ipu_ch, 0, 0);
@@ -636,7 +646,7 @@ int mx51_fb_init(struct fb_videomode *mode)
lcd_base += 56;
debug("Framebuffer at 0x%x\n", (unsigned int)lcd_base);
- ret = mxcfb_probe(IPU_PIX_FMT_RGB666, mode);
+ ret = mxcfb_probe(CONFIG_VIDEO_MX5_PIXFMT, mode);
return ret;
}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH] MX5: Make IPU display output and pixel format configurable 2011-09-27 12:09 [U-Boot] [PATCH] MX5: Make IPU display output and pixel format configurable Marek Vasut @ 2011-09-27 12:22 ` Fabio Estevam 2011-09-27 12:31 ` Marek Vasut 2011-09-27 12:28 ` Stefano Babic 2011-09-27 12:43 ` [U-Boot] [PATCH V2] " Marek Vasut 2 siblings, 1 reply; 11+ messages in thread From: Fabio Estevam @ 2011-09-27 12:22 UTC (permalink / raw) To: u-boot Hi Marek, On Tue, Sep 27, 2011 at 9:09 AM, Marek Vasut <marek.vasut@gmail.com> wrote: > Signed-off-by: Marek Vasut <marek.vasut@gmail.com> > Cc: Stefano Babic <sbabic@denx.de> > --- > ?drivers/video/mxc_ipuv3_fb.c | ? 14 ++++++++++++-- > ?1 files changed, 12 insertions(+), 2 deletions(-) > > diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c > index a66981c..c4443e8 100644 > --- a/drivers/video/mxc_ipuv3_fb.c > +++ b/drivers/video/mxc_ipuv3_fb.c > @@ -42,6 +42,16 @@ > > ?DECLARE_GLOBAL_DATA_PTR; > > +/* Use DISP #1 by default. */ > +#ifndef ? ? ? ?CONFIG_VIDEO_MX5_OUTPUT > +#define ? ? ? ?CONFIG_VIDEO_MX5_OUTPUT 0 > +#endif What about putting a define for selecting between IPU DI0 or DI1 in the board config file? There are boards that have DI0 connected as the primary display, others may have DI1. This way the mxc_ipuv3_fb.c driver could handle both cases depending on the board config. Regards, Fabio Estevam ^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH] MX5: Make IPU display output and pixel format configurable 2011-09-27 12:22 ` Fabio Estevam @ 2011-09-27 12:31 ` Marek Vasut 0 siblings, 0 replies; 11+ messages in thread From: Marek Vasut @ 2011-09-27 12:31 UTC (permalink / raw) To: u-boot On Tuesday, September 27, 2011 02:22:18 PM Fabio Estevam wrote: > Hi Marek, > > On Tue, Sep 27, 2011 at 9:09 AM, Marek Vasut <marek.vasut@gmail.com> wrote: > > Signed-off-by: Marek Vasut <marek.vasut@gmail.com> > > Cc: Stefano Babic <sbabic@denx.de> > > --- > > drivers/video/mxc_ipuv3_fb.c | 14 ++++++++++++-- > > 1 files changed, 12 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c > > index a66981c..c4443e8 100644 > > --- a/drivers/video/mxc_ipuv3_fb.c > > +++ b/drivers/video/mxc_ipuv3_fb.c > > @@ -42,6 +42,16 @@ > > > > DECLARE_GLOBAL_DATA_PTR; > > > > +/* Use DISP #1 by default. */ > > +#ifndef CONFIG_VIDEO_MX5_OUTPUT > > +#define CONFIG_VIDEO_MX5_OUTPUT 0 > > +#endif > > What about putting a define for selecting between IPU DI0 or DI1 in > the board config file? > > There are boards that have DI0 connected as the primary display, > others may have DI1. > > This way the mxc_ipuv3_fb.c driver could handle both cases depending > on the board config. Sure, this is a default value for boards which just use the default (most common case). You can define CONFIG... in your board config file and change this. > > Regards, > > Fabio Estevam ^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH] MX5: Make IPU display output and pixel format configurable 2011-09-27 12:09 [U-Boot] [PATCH] MX5: Make IPU display output and pixel format configurable Marek Vasut 2011-09-27 12:22 ` Fabio Estevam @ 2011-09-27 12:28 ` Stefano Babic 2011-09-27 12:43 ` [U-Boot] [PATCH V2] " Marek Vasut 2 siblings, 0 replies; 11+ messages in thread From: Stefano Babic @ 2011-09-27 12:28 UTC (permalink / raw) To: u-boot On 09/27/2011 02:09 PM, Marek Vasut wrote: > Signed-off-by: Marek Vasut <marek.vasut@gmail.com> > Cc: Stefano Babic <sbabic@denx.de> > --- > drivers/video/mxc_ipuv3_fb.c | 14 ++++++++++++-- > 1 files changed, 12 insertions(+), 2 deletions(-) > > diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c > index a66981c..c4443e8 100644 > --- a/drivers/video/mxc_ipuv3_fb.c > +++ b/drivers/video/mxc_ipuv3_fb.c > @@ -42,6 +42,16 @@ > > DECLARE_GLOBAL_DATA_PTR; > > +/* Use DISP #1 by default. */ > +#ifndef CONFIG_VIDEO_MX5_OUTPUT > +#define CONFIG_VIDEO_MX5_OUTPUT 0 > +#endif > + > +/* Use RGB666 pixel format by default. */ > +#ifndef CONFIG_VIDEO_MX5_PIXFMT > +#define CONFIG_VIDEO_MX5_PIXFMT IPU_PIX_FMT_RGB666 > +#endif > + > void *lcd_base; /* Start of framebuffer memory */ > void *lcd_console_address; /* Start of console buffer */ > > @@ -550,7 +560,7 @@ static int mxcfb_probe(u32 interface_pix_fmt, struct fb_videomode *mode) > mxcfbi->blank = FB_BLANK_POWERDOWN; > } > > - mxcfbi->ipu_di = 0; > + mxcfbi->ipu_di = CONFIG_VIDEO_MX5_OUTPUT; > > ipu_disp_set_global_alpha(mxcfbi->ipu_ch, 1, 0x80); > ipu_disp_set_color_key(mxcfbi->ipu_ch, 0, 0); > @@ -636,7 +646,7 @@ int mx51_fb_init(struct fb_videomode *mode) > lcd_base += 56; > > debug("Framebuffer at 0x%x\n", (unsigned int)lcd_base); > - ret = mxcfb_probe(IPU_PIX_FMT_RGB666, mode); > + ret = mxcfb_probe(CONFIG_VIDEO_MX5_PIXFMT, mode); > What about to not use a CONFIG_ ? at the moment, the board code calls mx51_fb_init() to initialize the display parameter. We can add a second parameter (display_id) to the initialization and the board code is responsible to do that. And it is not required to recompile u-boot if the board as the mx51evk more as one display has or can have. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de ===================================================================== ^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH V2] MX5: Make IPU display output and pixel format configurable 2011-09-27 12:09 [U-Boot] [PATCH] MX5: Make IPU display output and pixel format configurable Marek Vasut 2011-09-27 12:22 ` Fabio Estevam 2011-09-27 12:28 ` Stefano Babic @ 2011-09-27 12:43 ` Marek Vasut 2011-09-27 12:50 ` Stefano Babic 2011-10-06 21:20 ` Wolfgang Denk 2 siblings, 2 replies; 11+ messages in thread From: Marek Vasut @ 2011-09-27 12:43 UTC (permalink / raw) To: u-boot Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> --- board/ttcontrol/vision2/vision2.c | 6 ++++-- drivers/video/mxc_ipuv3_fb.c | 9 +++++---- 2 files changed, 9 insertions(+), 6 deletions(-) V2: Configure the LCD via mx51_fb_init diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index ebca7b6..4565d1d 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -39,11 +39,13 @@ #include <mc13892.h> #include <linux/fb.h> +#include <../drivers/video/ipu.h> + DECLARE_GLOBAL_DATA_PTR; static u32 system_rev; -extern int mx51_fb_init(struct fb_videomode *mode); +extern int mx51_fb_init(struct fb_videomode *, uint8_t, uint32_t); static struct fb_videomode nec_nl6448bc26_09c = { "NEC_NL6448BC26-09C", @@ -646,7 +648,7 @@ void lcd_enable(void) gpio_set_value(2, 1); mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0); - ret = mx51_fb_init(&nec_nl6448bc26_09c); + ret = mx51_fb_init(&nec_nl6448bc26_09c, 0, IPU_PIX_FMT_RGB666); if (ret) puts("LCD cannot be configured\n"); } diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c index a66981c..3fa8b8e 100644 --- a/drivers/video/mxc_ipuv3_fb.c +++ b/drivers/video/mxc_ipuv3_fb.c @@ -526,7 +526,8 @@ static struct fb_info *mxcfb_init_fbinfo(void) * * @return Appropriate error code to the kernel common code */ -static int mxcfb_probe(u32 interface_pix_fmt, struct fb_videomode *mode) +static int mxcfb_probe(u32 interface_pix_fmt, uint8_t disp, + struct fb_videomode *mode) { struct fb_info *fbi; struct mxcfb_info *mxcfbi; @@ -550,7 +551,7 @@ static int mxcfb_probe(u32 interface_pix_fmt, struct fb_videomode *mode) mxcfbi->blank = FB_BLANK_POWERDOWN; } - mxcfbi->ipu_di = 0; + mxcfbi->ipu_di = disp; ipu_disp_set_global_alpha(mxcfbi->ipu_ch, 1, 0x80); ipu_disp_set_color_key(mxcfbi->ipu_ch, 0, 0); @@ -625,7 +626,7 @@ void lcd_ctrl_init(void *lcdbase) memset(lcdbase, 0, mem_len); } -int mx51_fb_init(struct fb_videomode *mode) +int mx51_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt) { int ret; @@ -636,7 +637,7 @@ int mx51_fb_init(struct fb_videomode *mode) lcd_base += 56; debug("Framebuffer at 0x%x\n", (unsigned int)lcd_base); - ret = mxcfb_probe(IPU_PIX_FMT_RGB666, mode); + ret = mxcfb_probe(pixfmt, disp, mode); return ret; } -- 1.7.5.4 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH V2] MX5: Make IPU display output and pixel format configurable 2011-09-27 12:43 ` [U-Boot] [PATCH V2] " Marek Vasut @ 2011-09-27 12:50 ` Stefano Babic 2011-09-27 12:58 ` Marek Vasut 2011-10-06 21:20 ` Wolfgang Denk 1 sibling, 1 reply; 11+ messages in thread From: Stefano Babic @ 2011-09-27 12:50 UTC (permalink / raw) To: u-boot On 09/27/2011 02:43 PM, Marek Vasut wrote: > Signed-off-by: Marek Vasut <marek.vasut@gmail.com> > Cc: Stefano Babic <sbabic@denx.de> > --- > board/ttcontrol/vision2/vision2.c | 6 ++++-- > drivers/video/mxc_ipuv3_fb.c | 9 +++++---- > 2 files changed, 9 insertions(+), 6 deletions(-) > > V2: Configure the LCD via mx51_fb_init You missed to send your patch to Anatolij (video maintainer), too. > > diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c > index ebca7b6..4565d1d 100644 > --- a/board/ttcontrol/vision2/vision2.c > +++ b/board/ttcontrol/vision2/vision2.c > @@ -39,11 +39,13 @@ > #include <mc13892.h> > #include <linux/fb.h> > > +#include <../drivers/video/ipu.h> > + > DECLARE_GLOBAL_DATA_PTR; > > static u32 system_rev; > > -extern int mx51_fb_init(struct fb_videomode *mode); > +extern int mx51_fb_init(struct fb_videomode *, uint8_t, uint32_t); > > static struct fb_videomode nec_nl6448bc26_09c = { > "NEC_NL6448BC26-09C", > @@ -646,7 +648,7 @@ void lcd_enable(void) > gpio_set_value(2, 1); > mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0); > > - ret = mx51_fb_init(&nec_nl6448bc26_09c); > + ret = mx51_fb_init(&nec_nl6448bc26_09c, 0, IPU_PIX_FMT_RGB666); > if (ret) > puts("LCD cannot be configured\n"); > } > diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c > index a66981c..3fa8b8e 100644 > --- a/drivers/video/mxc_ipuv3_fb.c > +++ b/drivers/video/mxc_ipuv3_fb.c > @@ -526,7 +526,8 @@ static struct fb_info *mxcfb_init_fbinfo(void) > * > * @return Appropriate error code to the kernel common code > */ > -static int mxcfb_probe(u32 interface_pix_fmt, struct fb_videomode *mode) > +static int mxcfb_probe(u32 interface_pix_fmt, uint8_t disp, > + struct fb_videomode *mode) > { > struct fb_info *fbi; > struct mxcfb_info *mxcfbi; > @@ -550,7 +551,7 @@ static int mxcfb_probe(u32 interface_pix_fmt, struct fb_videomode *mode) > mxcfbi->blank = FB_BLANK_POWERDOWN; > } > > - mxcfbi->ipu_di = 0; > + mxcfbi->ipu_di = disp; > > ipu_disp_set_global_alpha(mxcfbi->ipu_ch, 1, 0x80); > ipu_disp_set_color_key(mxcfbi->ipu_ch, 0, 0); > @@ -625,7 +626,7 @@ void lcd_ctrl_init(void *lcdbase) > memset(lcdbase, 0, mem_len); > } > > -int mx51_fb_init(struct fb_videomode *mode) > +int mx51_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt) > { > int ret; > > @@ -636,7 +637,7 @@ int mx51_fb_init(struct fb_videomode *mode) > lcd_base += 56; > > debug("Framebuffer at 0x%x\n", (unsigned int)lcd_base); > - ret = mxcfb_probe(IPU_PIX_FMT_RGB666, mode); > + ret = mxcfb_probe(pixfmt, disp, mode); > > return ret; > } Agree with your changes- only they can conflict with the patch I submitted recently to switch to CONFIG_VIDEO, see http://patchwork.ozlabs.org/patch/116380/ Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de ===================================================================== ^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH V2] MX5: Make IPU display output and pixel format configurable 2011-09-27 12:50 ` Stefano Babic @ 2011-09-27 12:58 ` Marek Vasut 2011-09-27 13:07 ` Stefano Babic 0 siblings, 1 reply; 11+ messages in thread From: Marek Vasut @ 2011-09-27 12:58 UTC (permalink / raw) To: u-boot On Tuesday, September 27, 2011 02:50:19 PM Stefano Babic wrote: > On 09/27/2011 02:43 PM, Marek Vasut wrote: > > Signed-off-by: Marek Vasut <marek.vasut@gmail.com> > > Cc: Stefano Babic <sbabic@denx.de> > > --- > > > > board/ttcontrol/vision2/vision2.c | 6 ++++-- > > drivers/video/mxc_ipuv3_fb.c | 9 +++++---- > > 2 files changed, 9 insertions(+), 6 deletions(-) > > > > V2: Configure the LCD via mx51_fb_init > > You missed to send your patch to Anatolij (video maintainer), too. Shall I resend or is it fine as it is ? [...] > > Agree with your changes- only they can conflict with the patch I > submitted recently to switch to CONFIG_VIDEO, see Can you possibly put this patch prior to your change and then rebase on top of it ? Cheers > > http://patchwork.ozlabs.org/patch/116380/ > > Best regards, > Stefano Babic ^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH V2] MX5: Make IPU display output and pixel format configurable 2011-09-27 12:58 ` Marek Vasut @ 2011-09-27 13:07 ` Stefano Babic 2011-09-27 13:19 ` Marek Vasut 0 siblings, 1 reply; 11+ messages in thread From: Stefano Babic @ 2011-09-27 13:07 UTC (permalink / raw) To: u-boot On 09/27/2011 02:58 PM, Marek Vasut wrote: >> >> Agree with your changes- only they can conflict with the patch I >> submitted recently to switch to CONFIG_VIDEO, see > > Can you possibly put this patch prior to your change and then rebase on top of > it ? > I can do it Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de ===================================================================== ^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH V2] MX5: Make IPU display output and pixel format configurable 2011-09-27 13:07 ` Stefano Babic @ 2011-09-27 13:19 ` Marek Vasut 0 siblings, 0 replies; 11+ messages in thread From: Marek Vasut @ 2011-09-27 13:19 UTC (permalink / raw) To: u-boot On Tuesday, September 27, 2011 03:07:12 PM Stefano Babic wrote: > On 09/27/2011 02:58 PM, Marek Vasut wrote: > >> Agree with your changes- only they can conflict with the patch I > >> submitted recently to switch to CONFIG_VIDEO, see > > > > Can you possibly put this patch prior to your change and then rebase on > > top of it ? > > I can do it Thanks! Cheers ^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH V2] MX5: Make IPU display output and pixel format configurable 2011-09-27 12:43 ` [U-Boot] [PATCH V2] " Marek Vasut 2011-09-27 12:50 ` Stefano Babic @ 2011-10-06 21:20 ` Wolfgang Denk 2011-10-06 21:32 ` Anatolij Gustschin 1 sibling, 1 reply; 11+ messages in thread From: Wolfgang Denk @ 2011-10-06 21:20 UTC (permalink / raw) To: u-boot Dear Marek Vasut, In message <1317127420-31221-1-git-send-email-marek.vasut@gmail.com> you wrote: > Signed-off-by: Marek Vasut <marek.vasut@gmail.com> > Cc: Stefano Babic <sbabic@denx.de> > --- > board/ttcontrol/vision2/vision2.c | 6 ++++-- > drivers/video/mxc_ipuv3_fb.c | 9 +++++---- > 2 files changed, 9 insertions(+), 6 deletions(-) > > V2: Configure the LCD via mx51_fb_init Checkpatch says: total: 0 errors, 1 warnings, 55 lines checked Please clean up and resubmit. Thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de A committee is a group that keeps the minutes and loses hours. -- Milton Berle ^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH V2] MX5: Make IPU display output and pixel format configurable 2011-10-06 21:20 ` Wolfgang Denk @ 2011-10-06 21:32 ` Anatolij Gustschin 0 siblings, 0 replies; 11+ messages in thread From: Anatolij Gustschin @ 2011-10-06 21:32 UTC (permalink / raw) To: u-boot Hi Wolfgang, Marek, On Thu, 06 Oct 2011 23:20:33 +0200 Wolfgang Denk <wd@denx.de> wrote: > Dear Marek Vasut, > > In message <1317127420-31221-1-git-send-email-marek.vasut@gmail.com> you wrote: > > Signed-off-by: Marek Vasut <marek.vasut@gmail.com> > > Cc: Stefano Babic <sbabic@denx.de> > > --- > > board/ttcontrol/vision2/vision2.c | 6 ++++-- > > drivers/video/mxc_ipuv3_fb.c | 9 +++++---- > > 2 files changed, 9 insertions(+), 6 deletions(-) > > > > V2: Configure the LCD via mx51_fb_init > > Checkpatch says: > > total: 0 errors, 1 warnings, 55 lines checked > > Please clean up and resubmit. Thanks. No, there is no need to resubmit this patch. Stefano resubmitted it as part of another patch set and a cleaned up patch version was already applied. Thanks, Anatolij ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2011-10-06 21:32 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2011-09-27 12:09 [U-Boot] [PATCH] MX5: Make IPU display output and pixel format configurable Marek Vasut 2011-09-27 12:22 ` Fabio Estevam 2011-09-27 12:31 ` Marek Vasut 2011-09-27 12:28 ` Stefano Babic 2011-09-27 12:43 ` [U-Boot] [PATCH V2] " Marek Vasut 2011-09-27 12:50 ` Stefano Babic 2011-09-27 12:58 ` Marek Vasut 2011-09-27 13:07 ` Stefano Babic 2011-09-27 13:19 ` Marek Vasut 2011-10-06 21:20 ` Wolfgang Denk 2011-10-06 21:32 ` Anatolij Gustschin
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.