* [PATCH v6 2/2] ASoC: da7210: Add support for ALC and Noise suppression
@ 2011-10-19 8:54 Ashish Chavan
2011-10-19 16:43 ` [alsa-devel] " Girdwood, Liam
2011-10-19 17:01 ` Mark Brown
0 siblings, 2 replies; 4+ messages in thread
From: Ashish Chavan @ 2011-10-19 8:54 UTC (permalink / raw)
To: Mark Brown, lrg, alsa-devel
Cc: linux-kernel, kuninori.morimoto.gx, David Dajun Chen
This patch adds controls to set following ALC parameters,
- Max gain, Min gain, Noise gain, Attack rate, Release rate and delay
It also adds a switch to enable/disable noise suppression.
As per DA7210 data sheet, ALC and noise suppression can be enabled
only if certain conditions are met. This condition checks are handled
by simply using "_EXT" version of controls to capture change events.
Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com>
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
---
Changes since v5:
- Changed error code from -EPERM to EINVAL
- Used bit fields instead of magic numbers
Changes since v1:
- Reading from register instead of cache
- Made debug message more specific about error
- Changed "Gain" to "Volume" in names of ALC controls
---
sound/soc/codecs/da7210.c | 110 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 110 insertions(+), 0 deletions(-)
diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c
index a31be70..f0a1999 100644
--- a/sound/soc/codecs/da7210.c
+++ b/sound/soc/codecs/da7210.c
@@ -26,11 +26,15 @@
#include <sound/tlv.h>
/* DA7210 register space */
+#define DA7210_CONTROL 0x01
#define DA7210_STATUS 0x02
#define DA7210_STARTUP1 0x03
#define DA7210_MIC_L 0x07
#define DA7210_MIC_R 0x08
+#define DA7210_AUX1_L 0x09
+#define DA7210_AUX1_R 0x0A
#define DA7210_AUX2 0x0B
+#define DA7210_IN_GAIN 0x0C
#define DA7210_INMIX_L 0x0D
#define DA7210_INMIX_R 0x0E
#define DA7210_ADC_HPF 0x0F
@@ -59,6 +63,12 @@
#define DA7210_PLL_DIV2 0x2A
#define DA7210_PLL_DIV3 0x2B
#define DA7210_PLL 0x2C
+#define DA7210_ALC_MAX 0x83
+#define DA7210_ALC_MIN 0x84
+#define DA7210_ALC_NOIS 0x85
+#define DA7210_ALC_ATT 0x86
+#define DA7210_ALC_REL 0x87
+#define DA7210_ALC_DEL 0x88
#define DA7210_A_HID_UNLOCK 0x8A
#define DA7210_A_TEST_UNLOCK 0x8B
#define DA7210_A_PLL1 0x90
@@ -81,6 +91,7 @@
#define DA7210_IN_R_EN (1 << 7)
/* ADC bit fields */
+#define DA7210_ADC_ALC_EN (1 << 0)
#define DA7210_ADC_L_EN (1 << 3)
#define DA7210_ADC_R_EN (1 << 7)
@@ -150,6 +161,29 @@
/* SOFTMUTE bit fields */
#define DA7210_RAMP_EN (1 << 6)
+/* CONTROL bit fields */
+#define DA7210_NOISE_SUP_EN (1 << 3)
+
+/* IN_GAIN bit fields */
+#define DA7210_INPGA_L_VOL (0x0F << 0)
+#define DA7210_INPGA_R_VOL (0xF0 << 0)
+
+/* ZERO_CROSS bit fields */
+#define DA7210_AUX1_L_ZC (1 << 0)
+#define DA7210_AUX1_R_ZC (1 << 1)
+#define DA7210_HP_L_ZC (1 << 6)
+#define DA7210_HP_R_ZC (1 << 7)
+
+/* AUX1_L bit fields */
+#define DA7210_AUX1_L_VOL (0x3F << 0)
+
+/* AUX1_R bit fields */
+#define DA7210_AUX1_R_VOL (0x3F << 0)
+
+/* Minimum INPGA and AUX1 volume to enable noise suppression */
+#define DA7210_INPGA_MIN_VOL_NS 0x0A /* 10.5dB */
+#define DA7210_AUX1_MIN_VOL_NS 0x35 /* 6dB */
+
#define DA7210_VERSION "0.0.1"
/*
@@ -202,6 +236,69 @@ static const char *da7210_hp_mode_txt[] = {
static const struct soc_enum da7210_hp_mode_sel =
SOC_ENUM_SINGLE(DA7210_HP_CFG, 0, 2, da7210_hp_mode_txt);
+/* ALC can be enabled only if noise suppression is disabled */
+static int da7210_put_alc_sw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+
+ if (ucontrol->value.integer.value[0]) {
+ /* Check if noise suppression is enabled */
+ if (snd_soc_read(codec, DA7210_CONTROL) & DA7210_NOISE_SUP_EN) {
+ dev_dbg(codec->dev,
+ "Disable noise suppression to enable ALC\n");
+ return -EINVAL;
+ }
+ }
+ /* If all conditions are met or we are actually disabling ALC */
+ return snd_soc_put_volsw(kcontrol, ucontrol);
+}
+
+/* Noise suppression can be enabled only if following conditions are met
+ * ALC disabled
+ * ZC enabled for HP and AUX1 PGA
+ * INPGA_L_VOL and INPGA_R_VOL >= 10.5 dB
+ * AUX1_L_VOL and AUX1_R_VOL >= 6 dB
+ */
+static int da7210_put_noise_sup_sw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ u8 val;
+
+ if (ucontrol->value.integer.value[0]) {
+ /* Check if ALC is enabled */
+ if (snd_soc_read(codec, DA7210_ADC) & DA7210_ADC_ALC_EN)
+ goto err;
+
+ /* Check ZC for HP and AUX1 PGA */
+ if ((snd_soc_read(codec, DA7210_ZERO_CROSS) &
+ (DA7210_AUX1_L_ZC | DA7210_AUX1_R_ZC | DA7210_HP_L_ZC |
+ DA7210_HP_R_ZC)) != (DA7210_AUX1_L_ZC |
+ DA7210_AUX1_R_ZC | DA7210_HP_L_ZC | DA7210_HP_R_ZC))
+ goto err;
+
+ /* Check INPGA_L_VOL and INPGA_R_VOL */
+ val = snd_soc_read(codec, DA7210_IN_GAIN);
+ if (((val & DA7210_INPGA_L_VOL) < DA7210_INPGA_MIN_VOL_NS) ||
+ (((val & DA7210_INPGA_R_VOL) >> 4) <
+ DA7210_INPGA_MIN_VOL_NS))
+ goto err;
+
+ /* Check AUX1_L_VOL and AUX1_R_VOL */
+ if (((snd_soc_read(codec, DA7210_AUX1_L) & DA7210_AUX1_L_VOL) <
+ DA7210_AUX1_MIN_VOL_NS) ||
+ ((snd_soc_read(codec, DA7210_AUX1_R) & DA7210_AUX1_R_VOL) <
+ DA7210_AUX1_MIN_VOL_NS))
+ goto err;
+ }
+ /* If all conditions are met or we are actually disabling Noise sup */
+ return snd_soc_put_volsw(kcontrol, ucontrol);
+
+err:
+ return -EINVAL;
+}
+
static const struct snd_kcontrol_new da7210_snd_controls[] = {
SOC_DOUBLE_R_TLV("HeadPhone Playback Volume",
@@ -260,6 +357,19 @@ static const struct snd_kcontrol_new da7210_snd_controls[] = {
SOC_DOUBLE("Headphone ZC Switch", DA7210_ZERO_CROSS, 6, 7, 1, 0),
SOC_ENUM("Headphone Class", da7210_hp_mode_sel),
+
+ /* ALC controls */
+ SOC_SINGLE_EXT("ALC Enable Switch", DA7210_ADC, 0, 1, 0,
+ snd_soc_get_volsw, da7210_put_alc_sw),
+ SOC_SINGLE("ALC Capture Max Volume", DA7210_ALC_MAX, 0, 0x3F, 0),
+ SOC_SINGLE("ALC Capture Min Volume", DA7210_ALC_MIN, 0, 0x3F, 0),
+ SOC_SINGLE("ALC Capture Noise Volume", DA7210_ALC_NOIS, 0, 0x3F, 0),
+ SOC_SINGLE("ALC Capture Attack Rate", DA7210_ALC_ATT, 0, 0xFF, 0),
+ SOC_SINGLE("ALC Capture Release Rate", DA7210_ALC_REL, 0, 0xFF, 0),
+ SOC_SINGLE("ALC Capture Release Delay", DA7210_ALC_DEL, 0, 0xFF, 0),
+
+ SOC_SINGLE_EXT("Noise Suppression Enable Switch", DA7210_CONTROL, 3, 1,
+ 0, snd_soc_get_volsw, da7210_put_noise_sup_sw),
};
/* Codec private data */
--
1.7.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [alsa-devel] [PATCH v6 2/2] ASoC: da7210: Add support for ALC and Noise suppression
2011-10-19 8:54 [PATCH v6 2/2] ASoC: da7210: Add support for ALC and Noise suppression Ashish Chavan
@ 2011-10-19 16:43 ` Girdwood, Liam
2011-10-19 17:01 ` Mark Brown
1 sibling, 0 replies; 4+ messages in thread
From: Girdwood, Liam @ 2011-10-19 16:43 UTC (permalink / raw)
To: Ashish Chavan
Cc: Mark Brown, alsa-devel, David Dajun Chen, kuninori.morimoto.gx,
linux-kernel
On 19 October 2011 09:54, Ashish Chavan <ashish.chavan@kpitcummins.com> wrote:
> This patch adds controls to set following ALC parameters,
> - Max gain, Min gain, Noise gain, Attack rate, Release rate and delay
>
> It also adds a switch to enable/disable noise suppression.
>
> As per DA7210 data sheet, ALC and noise suppression can be enabled
> only if certain conditions are met. This condition checks are handled
> by simply using "_EXT" version of controls to capture change events.
>
> Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com>
> Signed-off-by: David Dajun Chen <dchen@diasemi.com>
> ---
> Changes since v5:
> - Changed error code from -EPERM to EINVAL
> - Used bit fields instead of magic numbers
>
> Changes since v1:
> - Reading from register instead of cache
> - Made debug message more specific about error
> - Changed "Gain" to "Volume" in names of ALC controls
> ---
> sound/soc/codecs/da7210.c | 110 +++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 110 insertions(+), 0 deletions(-)
>
Acked-by: Liam Girdwood <lrg@ti.com>
Thanks
Liam
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [alsa-devel] [PATCH v6 2/2] ASoC: da7210: Add support for ALC and Noise suppression
2011-10-19 8:54 [PATCH v6 2/2] ASoC: da7210: Add support for ALC and Noise suppression Ashish Chavan
@ 2011-10-19 17:01 ` Mark Brown
2011-10-19 17:01 ` Mark Brown
1 sibling, 0 replies; 4+ messages in thread
From: Mark Brown @ 2011-10-19 17:01 UTC (permalink / raw)
To: Ashish Chavan
Cc: lrg, alsa-devel, David Dajun Chen, kuninori.morimoto.gx, linux-kernel
On Wed, Oct 19, 2011 at 02:24:37PM +0530, Ashish Chavan wrote:
> This patch adds controls to set following ALC parameters,
> - Max gain, Min gain, Noise gain, Attack rate, Release rate and delay
Applied, thanks.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v6 2/2] ASoC: da7210: Add support for ALC and Noise suppression
@ 2011-10-19 17:01 ` Mark Brown
0 siblings, 0 replies; 4+ messages in thread
From: Mark Brown @ 2011-10-19 17:01 UTC (permalink / raw)
To: Ashish Chavan
Cc: linux-kernel, alsa-devel, lrg, kuninori.morimoto.gx, David Dajun Chen
On Wed, Oct 19, 2011 at 02:24:37PM +0530, Ashish Chavan wrote:
> This patch adds controls to set following ALC parameters,
> - Max gain, Min gain, Noise gain, Attack rate, Release rate and delay
Applied, thanks.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-10-19 17:01 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-10-19 8:54 [PATCH v6 2/2] ASoC: da7210: Add support for ALC and Noise suppression Ashish Chavan
2011-10-19 16:43 ` [alsa-devel] " Girdwood, Liam
2011-10-19 17:01 ` Mark Brown
2011-10-19 17:01 ` Mark Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.