[PATCH 01/12] gma500: Move the basic driver out of staging

[PATCH 01/12] gma500: Move the basic driver out of staging

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

This driver supports unaccelerated KMS display, and accelerated console
handling on the Intel Poulsbo, Oaktrail, Cedarview and Medfield hardware.

For the initial merge Medfield will be left out as it needs considerable
further work to reach a decent standard

Begin by adding the Makefiles and Kconfig. These are not yet plumbed into
the DRM layer so will have no effect on their own

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/Kconfig  |   26 ++++++++++++++++++++++++++
 drivers/gpu/drm/gma500/Makefile |   39 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 65 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpu/drm/gma500/Kconfig
 create mode 100644 drivers/gpu/drm/gma500/Makefile


diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig
new file mode 100644
index 0000000..78e46e8
--- /dev/null
+++ b/drivers/gpu/drm/gma500/Kconfig
@@ -0,0 +1,26 @@
+config DRM_GMA500
+	tristate "Intel GMA5/600 KMS Framebuffer"
+	depends on DRM && PCI && X86 && EXPERIMENTAL
+	select FB_CFB_COPYAREA
+        select FB_CFB_FILLRECT
+        select FB_CFB_IMAGEBLIT
+        select DRM_KMS_HELPER
+        select DRM_TTM
+	help
+	  Say yes for an experimental 2D KMS framebuffer driver for the
+	  Intel GMA500 ('Poulsbo') and other Intel IMG based graphics
+	  devices.
+
+config DRM_GMA600
+	bool "Intel GMA600 support (Experimental)"
+	depends on DRM_GMA500
+	help
+	  Say yes to include support for GMA600 (Intel Moorestown/Oaktrail)
+	  platforms with LVDS ports. HDMI and MIPI are not currently
+	  supported.
+
+config DRM_CEDARVIEW
+	bool "Intel Cedarview support (Experimental)"
+	depends on DRM_GMA500
+	help
+	  Say yes to include support for Intel Cedarview platforms
diff --git a/drivers/gpu/drm/gma500/Makefile b/drivers/gpu/drm/gma500/Makefile
new file mode 100644
index 0000000..613c74f
--- /dev/null
+++ b/drivers/gpu/drm/gma500/Makefile
@@ -0,0 +1,39 @@
+#
+#	KMS driver for the GMA500
+#
+ccflags-y += -Iinclude/drm
+
+gma500_gfx-y += gem_glue.o \
+	  accel_2d.o \
+	  backlight.o \
+	  framebuffer.o \
+	  gem.o \
+	  gtt.o \
+	  intel_bios.o \
+	  intel_i2c.o \
+	  intel_opregion.o \
+	  mmu.o \
+	  power.o \
+	  psb_drv.o \
+	  psb_intel_display.o \
+	  psb_intel_lvds.o \
+	  psb_intel_modes.o \
+	  psb_intel_sdvo.o \
+	  psb_lid.o \
+	  psb_irq.o \
+	  psb_device.o \
+	  mid_bios.o
+
+gma500_gfx-$(CONFIG_DRM_CEDARVIEW) +=  cdv_device.o \
+	  cdv_intel_crt.o \
+	  cdv_intel_display.o \
+	  cdv_intel_hdmi.o \
+	  cdv_intel_lvds.o
+
+gma500_gfx-$(CONFIG_DRM_GMA600) += oaktrail_device.o \
+	  oaktrail_crtc.o \
+	  oaktrail_lvds.o \
+	  oaktrail_hdmi.o \
+	  oaktrail_hdmi_i2c.o
+
+obj-$(CONFIG_DRM_GMA500) += gma500_gfx.o

[PATCH 02/12] gma500: GEM and GEM glue

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

The driver uses GEM along with a couple of small bits of wrapping of its
own. The only real oddity here is the support for using the 'stolen' memory
rather than wasting several MB.

We use a simple resource manager as we don't need to manage our space
intensively at all as we only do 2D work. We also have a GTT which is
entirely GPU facing so in the Cedarview case are not even allocating from
host address space.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/gem.c      |  295 +++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/gma500/gem_glue.c |   89 +++++++++++
 drivers/gpu/drm/gma500/gem_glue.h |    2 
 3 files changed, 386 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpu/drm/gma500/gem.c
 create mode 100644 drivers/gpu/drm/gma500/gem_glue.c
 create mode 100644 drivers/gpu/drm/gma500/gem_glue.h


diff --git a/drivers/gpu/drm/gma500/gem.c b/drivers/gpu/drm/gma500/gem.c
new file mode 100644
index 0000000..65fdd6b
--- /dev/null
+++ b/drivers/gpu/drm/gma500/gem.c
@@ -0,0 +1,295 @@
+/*
+ *  psb GEM interface
+ *
+ * Copyright (c) 2011, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors: Alan Cox
+ *
+ * TODO:
+ *	-	we need to work out if the MMU is relevant (eg for
+ *		accelerated operations on a GEM object)
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "psb_drm.h"
+#include "psb_drv.h"
+
+int psb_gem_init_object(struct drm_gem_object *obj)
+{
+	return -EINVAL;
+}
+
+void psb_gem_free_object(struct drm_gem_object *obj)
+{
+	struct gtt_range *gtt = container_of(obj, struct gtt_range, gem);
+	drm_gem_object_release_wrap(obj);
+	/* This must occur last as it frees up the memory of the GEM object */
+	psb_gtt_free_range(obj->dev, gtt);
+}
+
+int psb_gem_get_aperture(struct drm_device *dev, void *data,
+				struct drm_file *file)
+{
+	return -EINVAL;
+}
+
+/**
+ *	psb_gem_dumb_map_gtt	-	buffer mapping for dumb interface
+ *	@file: our drm client file
+ *	@dev: drm device
+ *	@handle: GEM handle to the object (from dumb_create)
+ *
+ *	Do the necessary setup to allow the mapping of the frame buffer
+ *	into user memory. We don't have to do much here at the moment.
+ */
+int psb_gem_dumb_map_gtt(struct drm_file *file, struct drm_device *dev,
+			 uint32_t handle, uint64_t *offset)
+{
+	int ret = 0;
+	struct drm_gem_object *obj;
+
+	if (!(dev->driver->driver_features & DRIVER_GEM))
+		return -ENODEV;
+
+	mutex_lock(&dev->struct_mutex);
+
+	/* GEM does all our handle to object mapping */
+	obj = drm_gem_object_lookup(dev, file, handle);
+	if (obj == NULL) {
+		ret = -ENOENT;
+		goto unlock;
+	}
+	/* What validation is needed here ? */
+
+	/* Make it mmapable */
+	if (!obj->map_list.map) {
+		ret = gem_create_mmap_offset(obj);
+		if (ret)
+			goto out;
+	}
+	/* GEM should really work out the hash offsets for us */
+	*offset = (u64)obj->map_list.hash.key << PAGE_SHIFT;
+out:
+	drm_gem_object_unreference(obj);
+unlock:
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
+/**
+ *	psb_gem_create		-	create a mappable object
+ *	@file: the DRM file of the client
+ *	@dev: our device
+ *	@size: the size requested
+ *	@handlep: returned handle (opaque number)
+ *
+ *	Create a GEM object, fill in the boilerplate and attach a handle to
+ *	it so that userspace can speak about it. This does the core work
+ *	for the various methods that do/will create GEM objects for things
+ */
+static int psb_gem_create(struct drm_file *file,
+	struct drm_device *dev, uint64_t size, uint32_t *handlep)
+{
+	struct gtt_range *r;
+	int ret;
+	u32 handle;
+
+	size = roundup(size, PAGE_SIZE);
+
+	/* Allocate our object - for now a direct gtt range which is not
+	   stolen memory backed */
+	r = psb_gtt_alloc_range(dev, size, "gem", 0);
+	if (r == NULL) {
+		dev_err(dev->dev, "no memory for %lld byte GEM object\n", size);
+		return -ENOSPC;
+	}
+	/* Initialize the extra goodies GEM needs to do all the hard work */
+	if (drm_gem_object_init(dev, &r->gem, size) != 0) {
+		psb_gtt_free_range(dev, r);
+		/* GEM doesn't give an error code and we don't have an
+		   EGEMSUCKS so make something up for now - FIXME */
+		dev_err(dev->dev, "GEM init failed for %lld\n", size);
+		return -ENOMEM;
+	}
+	/* Give the object a handle so we can carry it more easily */
+	ret = drm_gem_handle_create(file, &r->gem, &handle);
+	if (ret) {
+		dev_err(dev->dev, "GEM handle failed for %p, %lld\n",
+							&r->gem, size);
+		drm_gem_object_release(&r->gem);
+		psb_gtt_free_range(dev, r);
+		return ret;
+	}
+	/* We have the initial and handle reference but need only one now */
+	drm_gem_object_unreference(&r->gem);
+	*handlep = handle;
+	return 0;
+}
+
+/**
+ *	psb_gem_dumb_create	-	create a dumb buffer
+ *	@drm_file: our client file
+ *	@dev: our device
+ *	@args: the requested arguments copied from userspace
+ *
+ *	Allocate a buffer suitable for use for a frame buffer of the
+ *	form described by user space. Give userspace a handle by which
+ *	to reference it.
+ */
+int psb_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
+			struct drm_mode_create_dumb *args)
+{
+	args->pitch = ALIGN(args->width * ((args->bpp + 7) / 8), 64);
+	args->size = args->pitch * args->height;
+	return psb_gem_create(file, dev, args->size, &args->handle);
+}
+
+/**
+ *	psb_gem_dumb_destroy	-	destroy a dumb buffer
+ *	@file: client file
+ *	@dev: our DRM device
+ *	@handle: the object handle
+ *
+ *	Destroy a handle that was created via psb_gem_dumb_create, at least
+ *	we hope it was created that way. i915 seems to assume the caller
+ *	does the checking but that might be worth review ! FIXME
+ */
+int psb_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev,
+			uint32_t handle)
+{
+	/* No special work needed, drop the reference and see what falls out */
+	return drm_gem_handle_delete(file, handle);
+}
+
+/**
+ *	psb_gem_fault		-	pagefault handler for GEM objects
+ *	@vma: the VMA of the GEM object
+ *	@vmf: fault detail
+ *
+ *	Invoked when a fault occurs on an mmap of a GEM managed area. GEM
+ *	does most of the work for us including the actual map/unmap calls
+ *	but we need to do the actual page work.
+ *
+ *	This code eventually needs to handle faulting objects in and out
+ *	of the GTT and repacking it when we run out of space. We can put
+ *	that off for now and for our simple uses
+ *
+ *	The VMA was set up by GEM. In doing so it also ensured that the
+ *	vma->vm_private_data points to the GEM object that is backing this
+ *	mapping.
+ *
+ *	FIXME
+ */
+int psb_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct drm_gem_object *obj;
+	struct gtt_range *r;
+	int ret;
+	unsigned long pfn;
+	pgoff_t page_offset;
+	struct drm_device *dev;
+	struct drm_psb_private *dev_priv;
+
+	obj = vma->vm_private_data;	/* GEM object */
+	dev = obj->dev;
+	dev_priv = dev->dev_private;
+
+	r = container_of(obj, struct gtt_range, gem);	/* Get the gtt range */
+
+	/* Make sure we don't parallel update on a fault, nor move or remove
+	   something from beneath our feet */
+	mutex_lock(&dev->struct_mutex);
+
+	/* For now the mmap pins the object and it stays pinned. As things
+	   stand that will do us no harm */
+	if (r->mmapping == 0) {
+		ret = psb_gtt_pin(r);
+		if (ret < 0) {
+			dev_err(dev->dev, "gma500: pin failed: %d\n", ret);
+			goto fail;
+		}
+		r->mmapping = 1;
+	}
+
+	/* Page relative to the VMA start - we must calculate this ourselves
+	   because vmf->pgoff is the fake GEM offset */
+	page_offset = ((unsigned long) vmf->virtual_address - vma->vm_start)
+				>> PAGE_SHIFT;
+
+	/* CPU view of the page, don't go via the GART for CPU writes */
+	if (r->stolen)
+		pfn = (dev_priv->stolen_base + r->offset) >> PAGE_SHIFT;
+	else
+		pfn = page_to_pfn(r->pages[page_offset]);
+	ret = vm_insert_pfn(vma, (unsigned long)vmf->virtual_address, pfn);
+
+fail:
+	mutex_unlock(&dev->struct_mutex);
+	switch (ret) {
+	case 0:
+	case -ERESTARTSYS:
+	case -EINTR:
+		return VM_FAULT_NOPAGE;
+	case -ENOMEM:
+		return VM_FAULT_OOM;
+	default:
+		return VM_FAULT_SIGBUS;
+	}
+}
+
+static int psb_gem_create_stolen(struct drm_file *file, struct drm_device *dev,
+						int size, u32 *handle)
+{
+	struct gtt_range *gtt = psb_gtt_alloc_range(dev, size, "gem", 1);
+	if (gtt == NULL)
+		return -ENOMEM;
+	if (drm_gem_private_object_init(dev, &gtt->gem, size) != 0)
+		goto free_gtt;
+	if (drm_gem_handle_create(file, &gtt->gem, handle) == 0)
+		return 0;
+free_gtt:
+	psb_gtt_free_range(dev, gtt);
+	return -ENOMEM;
+}
+
+/*
+ *	GEM interfaces for our specific client
+ */
+int psb_gem_create_ioctl(struct drm_device *dev, void *data,
+					struct drm_file *file)
+{
+	struct drm_psb_gem_create *args = data;
+	int ret;
+	if (args->flags & PSB_GEM_CREATE_STOLEN) {
+		ret = psb_gem_create_stolen(file, dev, args->size,
+							&args->handle);
+		if (ret == 0)
+			return 0;
+		/* Fall throguh */
+		args->flags &= ~PSB_GEM_CREATE_STOLEN;
+	}
+	return psb_gem_create(file, dev, args->size, &args->handle);
+}
+
+int psb_gem_mmap_ioctl(struct drm_device *dev, void *data,
+					struct drm_file *file)
+{
+	struct drm_psb_gem_mmap *args = data;
+	return dev->driver->dumb_map_offset(file, dev,
+						args->handle, &args->offset);
+}
+
diff --git a/drivers/gpu/drm/gma500/gem_glue.c b/drivers/gpu/drm/gma500/gem_glue.c
new file mode 100644
index 0000000..daac121
--- /dev/null
+++ b/drivers/gpu/drm/gma500/gem_glue.c
@@ -0,0 +1,89 @@
+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+
+void drm_gem_object_release_wrap(struct drm_gem_object *obj)
+{
+	/* Remove the list map if one is present */
+	if (obj->map_list.map) {
+		struct drm_gem_mm *mm = obj->dev->mm_private;
+		struct drm_map_list *list = &obj->map_list;
+		drm_ht_remove_item(&mm->offset_hash, &list->hash);
+		drm_mm_put_block(list->file_offset_node);
+		kfree(list->map);
+		list->map = NULL;
+	}
+	drm_gem_object_release(obj);
+}
+
+/**
+ *	gem_create_mmap_offset		-	invent an mmap offset
+ *	@obj: our object
+ *
+ *	Standard implementation of offset generation for mmap as is
+ *	duplicated in several drivers. This belongs in GEM.
+ */
+int gem_create_mmap_offset(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	struct drm_gem_mm *mm = dev->mm_private;
+	struct drm_map_list *list;
+	struct drm_local_map *map;
+	int ret;
+
+	list = &obj->map_list;
+	list->map = kzalloc(sizeof(struct drm_map_list), GFP_KERNEL);
+	if (list->map == NULL)
+		return -ENOMEM;
+	map = list->map;
+	map->type = _DRM_GEM;
+	map->size = obj->size;
+	map->handle = obj;
+
+	list->file_offset_node = drm_mm_search_free(&mm->offset_manager,
+					obj->size / PAGE_SIZE, 0, 0);
+	if (!list->file_offset_node) {
+		dev_err(dev->dev, "failed to allocate offset for bo %d\n",
+								obj->name);
+		ret = -ENOSPC;
+		goto free_it;
+	}
+	list->file_offset_node = drm_mm_get_block(list->file_offset_node,
+					obj->size / PAGE_SIZE, 0);
+	if (!list->file_offset_node) {
+		ret = -ENOMEM;
+		goto free_it;
+	}
+	list->hash.key = list->file_offset_node->start;
+	ret = drm_ht_insert_item(&mm->offset_hash, &list->hash);
+	if (ret) {
+		dev_err(dev->dev, "failed to add to map hash\n");
+		goto free_mm;
+	}
+	return 0;
+
+free_mm:
+	drm_mm_put_block(list->file_offset_node);
+free_it:
+	kfree(list->map);
+	list->map = NULL;
+	return ret;
+}
diff --git a/drivers/gpu/drm/gma500/gem_glue.h b/drivers/gpu/drm/gma500/gem_glue.h
new file mode 100644
index 0000000..ce5ce30
--- /dev/null
+++ b/drivers/gpu/drm/gma500/gem_glue.h
@@ -0,0 +1,2 @@
+extern void drm_gem_object_release_wrap(struct drm_gem_object *obj);
+extern int gem_create_mmap_offset(struct drm_gem_object *obj);

[PATCH 03/12] gma500: introduce the GTT and MMU handling logic

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

This fits alongside the GEM support to manage our resources on the card
itself. It's not actually clear we need to configure the MMU at all.
Further research is needed before removing it entirely. For now we suck it
in (slightly abused) from the old semi-free driver.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/gtt.c |  500 ++++++++++++++++++++++++
 drivers/gpu/drm/gma500/gtt.h |   61 +++
 drivers/gpu/drm/gma500/mmu.c |  858 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1419 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpu/drm/gma500/gtt.c
 create mode 100644 drivers/gpu/drm/gma500/gtt.h
 create mode 100644 drivers/gpu/drm/gma500/mmu.c


diff --git a/drivers/gpu/drm/gma500/gtt.c b/drivers/gpu/drm/gma500/gtt.c
new file mode 100644
index 0000000..461ead2
--- /dev/null
+++ b/drivers/gpu/drm/gma500/gtt.c
@@ -0,0 +1,500 @@
+/*
+ * Copyright (c) 2007, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors: Thomas Hellstrom <thomas-at-tungstengraphics.com>
+ *	    Alan Cox <alan@linux.intel.com>
+ */
+
+#include <drm/drmP.h>
+#include "psb_drv.h"
+
+
+/*
+ *	GTT resource allocator - manage page mappings in GTT space
+ */
+
+/**
+ *	psb_gtt_mask_pte	-	generate GTT pte entry
+ *	@pfn: page number to encode
+ *	@type: type of memory in the GTT
+ *
+ *	Set the GTT entry for the appropriate memory type.
+ */
+static inline uint32_t psb_gtt_mask_pte(uint32_t pfn, int type)
+{
+	uint32_t mask = PSB_PTE_VALID;
+
+	if (type & PSB_MMU_CACHED_MEMORY)
+		mask |= PSB_PTE_CACHED;
+	if (type & PSB_MMU_RO_MEMORY)
+		mask |= PSB_PTE_RO;
+	if (type & PSB_MMU_WO_MEMORY)
+		mask |= PSB_PTE_WO;
+
+	return (pfn << PAGE_SHIFT) | mask;
+}
+
+/**
+ *	psb_gtt_entry		-	find the GTT entries for a gtt_range
+ *	@dev: our DRM device
+ *	@r: our GTT range
+ *
+ *	Given a gtt_range object return the GTT offset of the page table
+ *	entries for this gtt_range
+ */
+u32 *psb_gtt_entry(struct drm_device *dev, struct gtt_range *r)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	unsigned long offset;
+
+	offset = r->resource.start - dev_priv->gtt_mem->start;
+
+	return dev_priv->gtt_map + (offset >> PAGE_SHIFT);
+}
+
+/**
+ *	psb_gtt_insert	-	put an object into the GTT
+ *	@dev: our DRM device
+ *	@r: our GTT range
+ *
+ *	Take our preallocated GTT range and insert the GEM object into
+ *	the GTT.
+ *
+ *	FIXME: gtt lock ?
+ */
+static int psb_gtt_insert(struct drm_device *dev, struct gtt_range *r)
+{
+	u32 *gtt_slot, pte;
+	struct page **pages;
+	int i;
+
+	if (r->pages == NULL) {
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	WARN_ON(r->stolen);	/* refcount these maybe ? */
+
+	gtt_slot = psb_gtt_entry(dev, r);
+	pages = r->pages;
+
+	/* Make sure changes are visible to the GPU */
+	set_pages_array_uc(pages, r->npage);
+
+	/* Write our page entries into the GTT itself */
+	for (i = 0; i < r->npage; i++) {
+		pte = psb_gtt_mask_pte(page_to_pfn(*pages++), 0/*type*/);
+		iowrite32(pte, gtt_slot++);
+	}
+	/* Make sure all the entries are set before we return */
+	ioread32(gtt_slot - 1);
+	return 0;
+}
+
+/**
+ *	psb_gtt_remove	-	remove an object from the GTT
+ *	@dev: our DRM device
+ *	@r: our GTT range
+ *
+ *	Remove a preallocated GTT range from the GTT. Overwrite all the
+ *	page table entries with the dummy page
+ */
+
+static void psb_gtt_remove(struct drm_device *dev, struct gtt_range *r)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 *gtt_slot, pte;
+	int i;
+
+	WARN_ON(r->stolen);
+
+	gtt_slot = psb_gtt_entry(dev, r);
+	pte = psb_gtt_mask_pte(page_to_pfn(dev_priv->scratch_page), 0);
+
+	for (i = 0; i < r->npage; i++)
+		iowrite32(pte, gtt_slot++);
+	ioread32(gtt_slot - 1);
+	set_pages_array_wb(r->pages, r->npage);
+}
+
+/**
+ *	psb_gtt_attach_pages	-	attach and pin GEM pages
+ *	@gt: the gtt range
+ *
+ *	Pin and build an in kernel list of the pages that back our GEM object.
+ *	While we hold this the pages cannot be swapped out
+ */
+static int psb_gtt_attach_pages(struct gtt_range *gt)
+{
+	struct inode *inode;
+	struct address_space *mapping;
+	int i;
+	struct page *p;
+	int pages = gt->gem.size / PAGE_SIZE;
+
+	WARN_ON(gt->pages);
+
+	/* This is the shared memory object that backs the GEM resource */
+	inode = gt->gem.filp->f_path.dentry->d_inode;
+	mapping = inode->i_mapping;
+
+	gt->pages = kmalloc(pages * sizeof(struct page *), GFP_KERNEL);
+	if (gt->pages == NULL)
+		return -ENOMEM;
+	gt->npage = pages;
+
+	for (i = 0; i < pages; i++) {
+		/* FIXME: review flags later */
+		p = read_cache_page_gfp(mapping, i,
+					__GFP_COLD | GFP_KERNEL);
+		if (IS_ERR(p))
+			goto err;
+		gt->pages[i] = p;
+	}
+	return 0;
+
+err:
+	while (i--)
+		page_cache_release(gt->pages[i]);
+	kfree(gt->pages);
+	gt->pages = NULL;
+	return PTR_ERR(p);
+}
+
+/**
+ *	psb_gtt_detach_pages	-	attach and pin GEM pages
+ *	@gt: the gtt range
+ *
+ *	Undo the effect of psb_gtt_attach_pages. At this point the pages
+ *	must have been removed from the GTT as they could now be paged out
+ *	and move bus address.
+ */
+static void psb_gtt_detach_pages(struct gtt_range *gt)
+{
+	int i;
+	for (i = 0; i < gt->npage; i++) {
+		/* FIXME: do we need to force dirty */
+		set_page_dirty(gt->pages[i]);
+		page_cache_release(gt->pages[i]);
+	}
+	kfree(gt->pages);
+	gt->pages = NULL;
+}
+
+/**
+ *	psb_gtt_pin		-	pin pages into the GTT
+ *	@gt: range to pin
+ *
+ *	Pin a set of pages into the GTT. The pins are refcounted so that
+ *	multiple pins need multiple unpins to undo.
+ *
+ *	Non GEM backed objects treat this as a no-op as they are always GTT
+ *	backed objects.
+ */
+int psb_gtt_pin(struct gtt_range *gt)
+{
+	int ret = 0;
+	struct drm_device *dev = gt->gem.dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	mutex_lock(&dev_priv->gtt_mutex);
+
+	if (gt->in_gart == 0 && gt->stolen == 0) {
+		ret = psb_gtt_attach_pages(gt);
+		if (ret < 0)
+			goto out;
+		ret = psb_gtt_insert(dev, gt);
+		if (ret < 0) {
+			psb_gtt_detach_pages(gt);
+			goto out;
+		}
+	}
+	gt->in_gart++;
+out:
+	mutex_unlock(&dev_priv->gtt_mutex);
+	return ret;
+}
+
+/**
+ *	psb_gtt_unpin		-	Drop a GTT pin requirement
+ *	@gt: range to pin
+ *
+ *	Undoes the effect of psb_gtt_pin. On the last drop the GEM object
+ *	will be removed from the GTT which will also drop the page references
+ *	and allow the VM to clean up or page stuff.
+ *
+ *	Non GEM backed objects treat this as a no-op as they are always GTT
+ *	backed objects.
+ */
+void psb_gtt_unpin(struct gtt_range *gt)
+{
+	struct drm_device *dev = gt->gem.dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	mutex_lock(&dev_priv->gtt_mutex);
+
+	WARN_ON(!gt->in_gart);
+
+	gt->in_gart--;
+	if (gt->in_gart == 0 && gt->stolen == 0) {
+		psb_gtt_remove(dev, gt);
+		psb_gtt_detach_pages(gt);
+	}
+	mutex_unlock(&dev_priv->gtt_mutex);
+}
+
+/*
+ *	GTT resource allocator - allocate and manage GTT address space
+ */
+
+/**
+ *	psb_gtt_alloc_range	-	allocate GTT address space
+ *	@dev: Our DRM device
+ *	@len: length (bytes) of address space required
+ *	@name: resource name
+ *	@backed: resource should be backed by stolen pages
+ *
+ *	Ask the kernel core to find us a suitable range of addresses
+ *	to use for a GTT mapping.
+ *
+ *	Returns a gtt_range structure describing the object, or NULL on
+ *	error. On successful return the resource is both allocated and marked
+ *	as in use.
+ */
+struct gtt_range *psb_gtt_alloc_range(struct drm_device *dev, int len,
+						const char *name, int backed)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct gtt_range *gt;
+	struct resource *r = dev_priv->gtt_mem;
+	int ret;
+	unsigned long start, end;
+
+	if (backed) {
+		/* The start of the GTT is the stolen pages */
+		start = r->start;
+		end = r->start + dev_priv->gtt.stolen_size - 1;
+	} else {
+		/* The rest we will use for GEM backed objects */
+		start = r->start + dev_priv->gtt.stolen_size;
+		end = r->end;
+	}
+
+	gt = kzalloc(sizeof(struct gtt_range), GFP_KERNEL);
+	if (gt == NULL)
+		return NULL;
+	gt->resource.name = name;
+	gt->stolen = backed;
+	gt->in_gart = backed;
+	/* Ensure this is set for non GEM objects */
+	gt->gem.dev = dev;
+	ret = allocate_resource(dev_priv->gtt_mem, &gt->resource,
+				len, start, end, PAGE_SIZE, NULL, NULL);
+	if (ret == 0) {
+		gt->offset = gt->resource.start - r->start;
+		return gt;
+	}
+	kfree(gt);
+	return NULL;
+}
+
+/**
+ *	psb_gtt_free_range	-	release GTT address space
+ *	@dev: our DRM device
+ *	@gt: a mapping created with psb_gtt_alloc_range
+ *
+ *	Release a resource that was allocated with psb_gtt_alloc_range. If the
+ *	object has been pinned by mmap users we clean this up here currently.
+ */
+void psb_gtt_free_range(struct drm_device *dev, struct gtt_range *gt)
+{
+	/* Undo the mmap pin if we are destroying the object */
+	if (gt->mmapping) {
+		psb_gtt_unpin(gt);
+		gt->mmapping = 0;
+	}
+	WARN_ON(gt->in_gart && !gt->stolen);
+	release_resource(&gt->resource);
+	kfree(gt);
+}
+
+void psb_gtt_alloc(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	init_rwsem(&dev_priv->gtt.sem);
+}
+
+void psb_gtt_takedown(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->gtt_map) {
+		iounmap(dev_priv->gtt_map);
+		dev_priv->gtt_map = NULL;
+	}
+	if (dev_priv->gtt_initialized) {
+		pci_write_config_word(dev->pdev, PSB_GMCH_CTRL,
+				      dev_priv->gmch_ctrl);
+		PSB_WVDC32(dev_priv->pge_ctl, PSB_PGETBL_CTL);
+		(void) PSB_RVDC32(PSB_PGETBL_CTL);
+	}
+	if (dev_priv->vram_addr)
+		iounmap(dev_priv->gtt_map);
+}
+
+int psb_gtt_init(struct drm_device *dev, int resume)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	unsigned gtt_pages;
+	unsigned long stolen_size, vram_stolen_size;
+	unsigned i, num_pages;
+	unsigned pfn_base;
+	uint32_t vram_pages;
+	uint32_t dvmt_mode = 0;
+	struct psb_gtt *pg;
+
+	int ret = 0;
+	uint32_t pte;
+
+	mutex_init(&dev_priv->gtt_mutex);
+
+	psb_gtt_alloc(dev);
+	pg = &dev_priv->gtt;
+
+	/* Enable the GTT */
+	pci_read_config_word(dev->pdev, PSB_GMCH_CTRL, &dev_priv->gmch_ctrl);
+	pci_write_config_word(dev->pdev, PSB_GMCH_CTRL,
+			      dev_priv->gmch_ctrl | _PSB_GMCH_ENABLED);
+
+	dev_priv->pge_ctl = PSB_RVDC32(PSB_PGETBL_CTL);
+	PSB_WVDC32(dev_priv->pge_ctl | _PSB_PGETBL_ENABLED, PSB_PGETBL_CTL);
+	(void) PSB_RVDC32(PSB_PGETBL_CTL);
+
+	/* The root resource we allocate address space from */
+	dev_priv->gtt_initialized = 1;
+
+	pg->gtt_phys_start = dev_priv->pge_ctl & PAGE_MASK;
+
+	/*
+	 *	FIXME: video mmu has hw bug to access 0x0D0000000,
+	 *	then make gatt start at 0x0e000,0000
+	 */
+	pg->mmu_gatt_start = 0xE0000000;
+
+	pg->gtt_start = pci_resource_start(dev->pdev, PSB_GTT_RESOURCE);
+	gtt_pages = pci_resource_len(dev->pdev, PSB_GTT_RESOURCE)
+								>> PAGE_SHIFT;
+	/* CDV workaround */
+	if (pg->gtt_start == 0 || gtt_pages == 0) {
+		dev_err(dev->dev, "GTT PCI BAR not initialized.\n");
+		gtt_pages = 64;
+		pg->gtt_start = dev_priv->pge_ctl;
+	}
+
+	pg->gatt_start = pci_resource_start(dev->pdev, PSB_GATT_RESOURCE);
+	pg->gatt_pages = pci_resource_len(dev->pdev, PSB_GATT_RESOURCE)
+								>> PAGE_SHIFT;
+	dev_priv->gtt_mem = &dev->pdev->resource[PSB_GATT_RESOURCE];
+
+	if (pg->gatt_pages == 0 || pg->gatt_start == 0) {
+		static struct resource fudge;	/* Preferably peppermint */
+
+		/* This can occur on CDV SDV systems. Fudge it in this case.
+		   We really don't care what imaginary space is being allocated
+		   at this point */
+		dev_err(dev->dev, "GATT PCI BAR not initialized.\n");
+		pg->gatt_start = 0x40000000;
+		pg->gatt_pages = (128 * 1024 * 1024) >> PAGE_SHIFT;
+		fudge.start = 0x40000000;
+		fudge.end = 0x40000000 + 128 * 1024 * 1024 - 1;
+		fudge.name = "fudge";
+		fudge.flags = IORESOURCE_MEM;
+		dev_priv->gtt_mem = &fudge;
+	}
+
+	pci_read_config_dword(dev->pdev, PSB_BSM, &dev_priv->stolen_base);
+	vram_stolen_size = pg->gtt_phys_start - dev_priv->stolen_base
+								- PAGE_SIZE;
+
+	stolen_size = vram_stolen_size;
+
+	printk(KERN_INFO "Stolen memory information\n");
+	printk(KERN_INFO "       base in RAM: 0x%x\n", dev_priv->stolen_base);
+	printk(KERN_INFO "       size: %luK, calculated by (GTT RAM base) - (Stolen base), seems wrong\n",
+		vram_stolen_size/1024);
+	dvmt_mode = (dev_priv->gmch_ctrl >> 4) & 0x7;
+	printk(KERN_INFO "      the correct size should be: %dM(dvmt mode=%d)\n",
+		(dvmt_mode == 1) ? 1 : (2 << (dvmt_mode - 1)), dvmt_mode);
+
+	if (resume && (gtt_pages != pg->gtt_pages) &&
+	    (stolen_size != pg->stolen_size)) {
+		dev_err(dev->dev, "GTT resume error.\n");
+		ret = -EINVAL;
+		goto out_err;
+	}
+
+	pg->gtt_pages = gtt_pages;
+	pg->stolen_size = stolen_size;
+	dev_priv->vram_stolen_size = vram_stolen_size;
+
+	/*
+	 *	Map the GTT and the stolen memory area
+	 */
+	dev_priv->gtt_map = ioremap_nocache(pg->gtt_phys_start,
+						gtt_pages << PAGE_SHIFT);
+	if (!dev_priv->gtt_map) {
+		dev_err(dev->dev, "Failure to map gtt.\n");
+		ret = -ENOMEM;
+		goto out_err;
+	}
+
+	dev_priv->vram_addr = ioremap_wc(dev_priv->stolen_base, stolen_size);
+	if (!dev_priv->vram_addr) {
+		dev_err(dev->dev, "Failure to map stolen base.\n");
+		ret = -ENOMEM;
+		goto out_err;
+	}
+
+	/*
+	 * Insert vram stolen pages into the GTT
+	 */
+
+	pfn_base = dev_priv->stolen_base >> PAGE_SHIFT;
+	vram_pages = num_pages = vram_stolen_size >> PAGE_SHIFT;
+	printk(KERN_INFO"Set up %d stolen pages starting at 0x%08x, GTT offset %dK\n",
+		num_pages, pfn_base << PAGE_SHIFT, 0);
+	for (i = 0; i < num_pages; ++i) {
+		pte = psb_gtt_mask_pte(pfn_base + i, 0);
+		iowrite32(pte, dev_priv->gtt_map + i);
+	}
+
+	/*
+	 * Init rest of GTT to the scratch page to avoid accidents or scribbles
+	 */
+
+	pfn_base = page_to_pfn(dev_priv->scratch_page);
+	pte = psb_gtt_mask_pte(pfn_base, 0);
+	for (; i < gtt_pages; ++i)
+		iowrite32(pte, dev_priv->gtt_map + i);
+
+	(void) ioread32(dev_priv->gtt_map + i - 1);
+	return 0;
+
+out_err:
+	psb_gtt_takedown(dev);
+	return ret;
+}
diff --git a/drivers/gpu/drm/gma500/gtt.h b/drivers/gpu/drm/gma500/gtt.h
new file mode 100644
index 0000000..e0e1cb6
--- /dev/null
+++ b/drivers/gpu/drm/gma500/gtt.h
@@ -0,0 +1,61 @@
+/**************************************************************************
+ * Copyright (c) 2007-2008, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#ifndef _PSB_GTT_H_
+#define _PSB_GTT_H_
+
+#include <drm/drmP.h>
+
+/* This wants cleaning up with respect to the psb_dev and un-needed stuff */
+struct psb_gtt {
+	uint32_t gatt_start;
+	uint32_t mmu_gatt_start;
+	uint32_t gtt_start;
+	uint32_t gtt_phys_start;
+	unsigned gtt_pages;
+	unsigned gatt_pages;
+	unsigned long stolen_size;
+	unsigned long vram_stolen_size;
+	struct rw_semaphore sem;
+};
+
+/* Exported functions */
+extern int psb_gtt_init(struct drm_device *dev, int resume);
+extern void psb_gtt_takedown(struct drm_device *dev);
+
+/* Each gtt_range describes an allocation in the GTT area */
+struct gtt_range {
+	struct resource resource;	/* Resource for our allocation */
+	u32 offset;			/* GTT offset of our object */
+	struct drm_gem_object gem;	/* GEM high level stuff */
+	int in_gart;			/* Currently in the GART (ref ct) */
+	bool stolen;			/* Backed from stolen RAM */
+	bool mmapping;			/* Is mmappable */
+	struct page **pages;		/* Backing pages if present */
+	int npage;			/* Number of backing pages */
+};
+
+extern struct gtt_range *psb_gtt_alloc_range(struct drm_device *dev, int len,
+						const char *name, int backed);
+extern void psb_gtt_kref_put(struct gtt_range *gt);
+extern void psb_gtt_free_range(struct drm_device *dev, struct gtt_range *gt);
+extern int psb_gtt_pin(struct gtt_range *gt);
+extern void psb_gtt_unpin(struct gtt_range *gt);
+
+#endif
diff --git a/drivers/gpu/drm/gma500/mmu.c b/drivers/gpu/drm/gma500/mmu.c
new file mode 100644
index 0000000..c904d73
--- /dev/null
+++ b/drivers/gpu/drm/gma500/mmu.c
@@ -0,0 +1,858 @@
+/**************************************************************************
+ * Copyright (c) 2007, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+#include <drm/drmP.h>
+#include "psb_drv.h"
+#include "psb_reg.h"
+
+/*
+ * Code for the SGX MMU:
+ */
+
+/*
+ * clflush on one processor only:
+ * clflush should apparently flush the cache line on all processors in an
+ * SMP system.
+ */
+
+/*
+ * kmap atomic:
+ * The usage of the slots must be completely encapsulated within a spinlock, and
+ * no other functions that may be using the locks for other purposed may be
+ * called from within the locked region.
+ * Since the slots are per processor, this will guarantee that we are the only
+ * user.
+ */
+
+/*
+ * TODO: Inserting ptes from an interrupt handler:
+ * This may be desirable for some SGX functionality where the GPU can fault in
+ * needed pages. For that, we need to make an atomic insert_pages function, that
+ * may fail.
+ * If it fails, the caller need to insert the page using a workqueue function,
+ * but on average it should be fast.
+ */
+
+struct psb_mmu_driver {
+	/* protects driver- and pd structures. Always take in read mode
+	 * before taking the page table spinlock.
+	 */
+	struct rw_semaphore sem;
+
+	/* protects page tables, directory tables and pt tables.
+	 * and pt structures.
+	 */
+	spinlock_t lock;
+
+	atomic_t needs_tlbflush;
+
+	uint8_t __iomem *register_map;
+	struct psb_mmu_pd *default_pd;
+	/*uint32_t bif_ctrl;*/
+	int has_clflush;
+	int clflush_add;
+	unsigned long clflush_mask;
+
+	struct drm_psb_private *dev_priv;
+};
+
+struct psb_mmu_pd;
+
+struct psb_mmu_pt {
+	struct psb_mmu_pd *pd;
+	uint32_t index;
+	uint32_t count;
+	struct page *p;
+	uint32_t *v;
+};
+
+struct psb_mmu_pd {
+	struct psb_mmu_driver *driver;
+	int hw_context;
+	struct psb_mmu_pt **tables;
+	struct page *p;
+	struct page *dummy_pt;
+	struct page *dummy_page;
+	uint32_t pd_mask;
+	uint32_t invalid_pde;
+	uint32_t invalid_pte;
+};
+
+static inline uint32_t psb_mmu_pt_index(uint32_t offset)
+{
+	return (offset >> PSB_PTE_SHIFT) & 0x3FF;
+}
+
+static inline uint32_t psb_mmu_pd_index(uint32_t offset)
+{
+	return offset >> PSB_PDE_SHIFT;
+}
+
+static inline void psb_clflush(void *addr)
+{
+	__asm__ __volatile__("clflush (%0)\n" : : "r"(addr) : "memory");
+}
+
+static inline void psb_mmu_clflush(struct psb_mmu_driver *driver,
+				   void *addr)
+{
+	if (!driver->has_clflush)
+		return;
+
+	mb();
+	psb_clflush(addr);
+	mb();
+}
+
+static void psb_page_clflush(struct psb_mmu_driver *driver, struct page* page)
+{
+	uint32_t clflush_add = driver->clflush_add >> PAGE_SHIFT;
+	uint32_t clflush_count = PAGE_SIZE / clflush_add;
+	int i;
+	uint8_t *clf;
+
+	clf = kmap_atomic(page, KM_USER0);
+	mb();
+	for (i = 0; i < clflush_count; ++i) {
+		psb_clflush(clf);
+		clf += clflush_add;
+	}
+	mb();
+	kunmap_atomic(clf, KM_USER0);
+}
+
+static void psb_pages_clflush(struct psb_mmu_driver *driver,
+				struct page *page[], unsigned long num_pages)
+{
+	int i;
+
+	if (!driver->has_clflush)
+		return ;
+
+	for (i = 0; i < num_pages; i++)
+		psb_page_clflush(driver, *page++);
+}
+
+static void psb_mmu_flush_pd_locked(struct psb_mmu_driver *driver,
+				    int force)
+{
+	atomic_set(&driver->needs_tlbflush, 0);
+}
+
+static void psb_mmu_flush_pd(struct psb_mmu_driver *driver, int force)
+{
+	down_write(&driver->sem);
+	psb_mmu_flush_pd_locked(driver, force);
+	up_write(&driver->sem);
+}
+
+void psb_mmu_flush(struct psb_mmu_driver *driver, int rc_prot)
+{
+	if (rc_prot)
+		down_write(&driver->sem);
+	if (rc_prot)
+		up_write(&driver->sem);
+}
+
+void psb_mmu_set_pd_context(struct psb_mmu_pd *pd, int hw_context)
+{
+	/*ttm_tt_cache_flush(&pd->p, 1);*/
+	psb_pages_clflush(pd->driver, &pd->p, 1);
+	down_write(&pd->driver->sem);
+	wmb();
+	psb_mmu_flush_pd_locked(pd->driver, 1);
+	pd->hw_context = hw_context;
+	up_write(&pd->driver->sem);
+
+}
+
+static inline unsigned long psb_pd_addr_end(unsigned long addr,
+					    unsigned long end)
+{
+
+	addr = (addr + PSB_PDE_MASK + 1) & ~PSB_PDE_MASK;
+	return (addr < end) ? addr : end;
+}
+
+static inline uint32_t psb_mmu_mask_pte(uint32_t pfn, int type)
+{
+	uint32_t mask = PSB_PTE_VALID;
+
+	if (type & PSB_MMU_CACHED_MEMORY)
+		mask |= PSB_PTE_CACHED;
+	if (type & PSB_MMU_RO_MEMORY)
+		mask |= PSB_PTE_RO;
+	if (type & PSB_MMU_WO_MEMORY)
+		mask |= PSB_PTE_WO;
+
+	return (pfn << PAGE_SHIFT) | mask;
+}
+
+struct psb_mmu_pd *psb_mmu_alloc_pd(struct psb_mmu_driver *driver,
+				    int trap_pagefaults, int invalid_type)
+{
+	struct psb_mmu_pd *pd = kmalloc(sizeof(*pd), GFP_KERNEL);
+	uint32_t *v;
+	int i;
+
+	if (!pd)
+		return NULL;
+
+	pd->p = alloc_page(GFP_DMA32);
+	if (!pd->p)
+		goto out_err1;
+	pd->dummy_pt = alloc_page(GFP_DMA32);
+	if (!pd->dummy_pt)
+		goto out_err2;
+	pd->dummy_page = alloc_page(GFP_DMA32);
+	if (!pd->dummy_page)
+		goto out_err3;
+
+	if (!trap_pagefaults) {
+		pd->invalid_pde =
+		    psb_mmu_mask_pte(page_to_pfn(pd->dummy_pt),
+				     invalid_type);
+		pd->invalid_pte =
+		    psb_mmu_mask_pte(page_to_pfn(pd->dummy_page),
+				     invalid_type);
+	} else {
+		pd->invalid_pde = 0;
+		pd->invalid_pte = 0;
+	}
+
+	v = kmap(pd->dummy_pt);
+	for (i = 0; i < (PAGE_SIZE / sizeof(uint32_t)); ++i)
+		v[i] = pd->invalid_pte;
+
+	kunmap(pd->dummy_pt);
+
+	v = kmap(pd->p);
+	for (i = 0; i < (PAGE_SIZE / sizeof(uint32_t)); ++i)
+		v[i] = pd->invalid_pde;
+
+	kunmap(pd->p);
+
+	clear_page(kmap(pd->dummy_page));
+	kunmap(pd->dummy_page);
+
+	pd->tables = vmalloc_user(sizeof(struct psb_mmu_pt *) * 1024);
+	if (!pd->tables)
+		goto out_err4;
+
+	pd->hw_context = -1;
+	pd->pd_mask = PSB_PTE_VALID;
+	pd->driver = driver;
+
+	return pd;
+
+out_err4:
+	__free_page(pd->dummy_page);
+out_err3:
+	__free_page(pd->dummy_pt);
+out_err2:
+	__free_page(pd->p);
+out_err1:
+	kfree(pd);
+	return NULL;
+}
+
+void psb_mmu_free_pt(struct psb_mmu_pt *pt)
+{
+	__free_page(pt->p);
+	kfree(pt);
+}
+
+void psb_mmu_free_pagedir(struct psb_mmu_pd *pd)
+{
+	struct psb_mmu_driver *driver = pd->driver;
+	struct psb_mmu_pt *pt;
+	int i;
+
+	down_write(&driver->sem);
+	if (pd->hw_context != -1)
+		psb_mmu_flush_pd_locked(driver, 1);
+
+	/* Should take the spinlock here, but we don't need to do that
+	   since we have the semaphore in write mode. */
+
+	for (i = 0; i < 1024; ++i) {
+		pt = pd->tables[i];
+		if (pt)
+			psb_mmu_free_pt(pt);
+	}
+
+	vfree(pd->tables);
+	__free_page(pd->dummy_page);
+	__free_page(pd->dummy_pt);
+	__free_page(pd->p);
+	kfree(pd);
+	up_write(&driver->sem);
+}
+
+static struct psb_mmu_pt *psb_mmu_alloc_pt(struct psb_mmu_pd *pd)
+{
+	struct psb_mmu_pt *pt = kmalloc(sizeof(*pt), GFP_KERNEL);
+	void *v;
+	uint32_t clflush_add = pd->driver->clflush_add >> PAGE_SHIFT;
+	uint32_t clflush_count = PAGE_SIZE / clflush_add;
+	spinlock_t *lock = &pd->driver->lock;
+	uint8_t *clf;
+	uint32_t *ptes;
+	int i;
+
+	if (!pt)
+		return NULL;
+
+	pt->p = alloc_page(GFP_DMA32);
+	if (!pt->p) {
+		kfree(pt);
+		return NULL;
+	}
+
+	spin_lock(lock);
+
+	v = kmap_atomic(pt->p, KM_USER0);
+	clf = (uint8_t *) v;
+	ptes = (uint32_t *) v;
+	for (i = 0; i < (PAGE_SIZE / sizeof(uint32_t)); ++i)
+		*ptes++ = pd->invalid_pte;
+
+
+	if (pd->driver->has_clflush && pd->hw_context != -1) {
+		mb();
+		for (i = 0; i < clflush_count; ++i) {
+			psb_clflush(clf);
+			clf += clflush_add;
+		}
+		mb();
+	}
+
+	kunmap_atomic(v, KM_USER0);
+	spin_unlock(lock);
+
+	pt->count = 0;
+	pt->pd = pd;
+	pt->index = 0;
+
+	return pt;
+}
+
+struct psb_mmu_pt *psb_mmu_pt_alloc_map_lock(struct psb_mmu_pd *pd,
+					     unsigned long addr)
+{
+	uint32_t index = psb_mmu_pd_index(addr);
+	struct psb_mmu_pt *pt;
+	uint32_t *v;
+	spinlock_t *lock = &pd->driver->lock;
+
+	spin_lock(lock);
+	pt = pd->tables[index];
+	while (!pt) {
+		spin_unlock(lock);
+		pt = psb_mmu_alloc_pt(pd);
+		if (!pt)
+			return NULL;
+		spin_lock(lock);
+
+		if (pd->tables[index]) {
+			spin_unlock(lock);
+			psb_mmu_free_pt(pt);
+			spin_lock(lock);
+			pt = pd->tables[index];
+			continue;
+		}
+
+		v = kmap_atomic(pd->p, KM_USER0);
+		pd->tables[index] = pt;
+		v[index] = (page_to_pfn(pt->p) << 12) | pd->pd_mask;
+		pt->index = index;
+		kunmap_atomic((void *) v, KM_USER0);
+
+		if (pd->hw_context != -1) {
+			psb_mmu_clflush(pd->driver, (void *) &v[index]);
+			atomic_set(&pd->driver->needs_tlbflush, 1);
+		}
+	}
+	pt->v = kmap_atomic(pt->p, KM_USER0);
+	return pt;
+}
+
+static struct psb_mmu_pt *psb_mmu_pt_map_lock(struct psb_mmu_pd *pd,
+					      unsigned long addr)
+{
+	uint32_t index = psb_mmu_pd_index(addr);
+	struct psb_mmu_pt *pt;
+	spinlock_t *lock = &pd->driver->lock;
+
+	spin_lock(lock);
+	pt = pd->tables[index];
+	if (!pt) {
+		spin_unlock(lock);
+		return NULL;
+	}
+	pt->v = kmap_atomic(pt->p, KM_USER0);
+	return pt;
+}
+
+static void psb_mmu_pt_unmap_unlock(struct psb_mmu_pt *pt)
+{
+	struct psb_mmu_pd *pd = pt->pd;
+	uint32_t *v;
+
+	kunmap_atomic(pt->v, KM_USER0);
+	if (pt->count == 0) {
+		v = kmap_atomic(pd->p, KM_USER0);
+		v[pt->index] = pd->invalid_pde;
+		pd->tables[pt->index] = NULL;
+
+		if (pd->hw_context != -1) {
+			psb_mmu_clflush(pd->driver,
+					(void *) &v[pt->index]);
+			atomic_set(&pd->driver->needs_tlbflush, 1);
+		}
+		kunmap_atomic(pt->v, KM_USER0);
+		spin_unlock(&pd->driver->lock);
+		psb_mmu_free_pt(pt);
+		return;
+	}
+	spin_unlock(&pd->driver->lock);
+}
+
+static inline void psb_mmu_set_pte(struct psb_mmu_pt *pt,
+				   unsigned long addr, uint32_t pte)
+{
+	pt->v[psb_mmu_pt_index(addr)] = pte;
+}
+
+static inline void psb_mmu_invalidate_pte(struct psb_mmu_pt *pt,
+					  unsigned long addr)
+{
+	pt->v[psb_mmu_pt_index(addr)] = pt->pd->invalid_pte;
+}
+
+
+void psb_mmu_mirror_gtt(struct psb_mmu_pd *pd,
+			uint32_t mmu_offset, uint32_t gtt_start,
+			uint32_t gtt_pages)
+{
+	uint32_t *v;
+	uint32_t start = psb_mmu_pd_index(mmu_offset);
+	struct psb_mmu_driver *driver = pd->driver;
+	int num_pages = gtt_pages;
+
+	down_read(&driver->sem);
+	spin_lock(&driver->lock);
+
+	v = kmap_atomic(pd->p, KM_USER0);
+	v += start;
+
+	while (gtt_pages--) {
+		*v++ = gtt_start | pd->pd_mask;
+		gtt_start += PAGE_SIZE;
+	}
+
+	/*ttm_tt_cache_flush(&pd->p, num_pages);*/
+	psb_pages_clflush(pd->driver, &pd->p, num_pages);
+	kunmap_atomic(v, KM_USER0);
+	spin_unlock(&driver->lock);
+
+	if (pd->hw_context != -1)
+		atomic_set(&pd->driver->needs_tlbflush, 1);
+
+	up_read(&pd->driver->sem);
+	psb_mmu_flush_pd(pd->driver, 0);
+}
+
+struct psb_mmu_pd *psb_mmu_get_default_pd(struct psb_mmu_driver *driver)
+{
+	struct psb_mmu_pd *pd;
+
+	/* down_read(&driver->sem); */
+	pd = driver->default_pd;
+	/* up_read(&driver->sem); */
+
+	return pd;
+}
+
+/* Returns the physical address of the PD shared by sgx/msvdx */
+uint32_t psb_get_default_pd_addr(struct psb_mmu_driver *driver)
+{
+	struct psb_mmu_pd *pd;
+
+	pd = psb_mmu_get_default_pd(driver);
+	return page_to_pfn(pd->p) << PAGE_SHIFT;
+}
+
+void psb_mmu_driver_takedown(struct psb_mmu_driver *driver)
+{
+	psb_mmu_free_pagedir(driver->default_pd);
+	kfree(driver);
+}
+
+struct psb_mmu_driver *psb_mmu_driver_init(uint8_t __iomem * registers,
+					int trap_pagefaults,
+					int invalid_type,
+					struct drm_psb_private *dev_priv)
+{
+	struct psb_mmu_driver *driver;
+
+	driver = kmalloc(sizeof(*driver), GFP_KERNEL);
+
+	if (!driver)
+		return NULL;
+	driver->dev_priv = dev_priv;
+
+	driver->default_pd = psb_mmu_alloc_pd(driver, trap_pagefaults,
+					      invalid_type);
+	if (!driver->default_pd)
+		goto out_err1;
+
+	spin_lock_init(&driver->lock);
+	init_rwsem(&driver->sem);
+	down_write(&driver->sem);
+	driver->register_map = registers;
+	atomic_set(&driver->needs_tlbflush, 1);
+
+	driver->has_clflush = 0;
+
+	if (boot_cpu_has(X86_FEATURE_CLFLSH)) {
+		uint32_t tfms, misc, cap0, cap4, clflush_size;
+
+		/*
+		 * clflush size is determined at kernel setup for x86_64
+		 *  but not for i386. We have to do it here.
+		 */
+
+		cpuid(0x00000001, &tfms, &misc, &cap0, &cap4);
+		clflush_size = ((misc >> 8) & 0xff) * 8;
+		driver->has_clflush = 1;
+		driver->clflush_add =
+		    PAGE_SIZE * clflush_size / sizeof(uint32_t);
+		driver->clflush_mask = driver->clflush_add - 1;
+		driver->clflush_mask = ~driver->clflush_mask;
+	}
+
+	up_write(&driver->sem);
+	return driver;
+
+out_err1:
+	kfree(driver);
+	return NULL;
+}
+
+static void psb_mmu_flush_ptes(struct psb_mmu_pd *pd,
+			       unsigned long address, uint32_t num_pages,
+			       uint32_t desired_tile_stride,
+			       uint32_t hw_tile_stride)
+{
+	struct psb_mmu_pt *pt;
+	uint32_t rows = 1;
+	uint32_t i;
+	unsigned long addr;
+	unsigned long end;
+	unsigned long next;
+	unsigned long add;
+	unsigned long row_add;
+	unsigned long clflush_add = pd->driver->clflush_add;
+	unsigned long clflush_mask = pd->driver->clflush_mask;
+
+	if (!pd->driver->has_clflush) {
+		/*ttm_tt_cache_flush(&pd->p, num_pages);*/
+		psb_pages_clflush(pd->driver, &pd->p, num_pages);
+		return;
+	}
+
+	if (hw_tile_stride)
+		rows = num_pages / desired_tile_stride;
+	else
+		desired_tile_stride = num_pages;
+
+	add = desired_tile_stride << PAGE_SHIFT;
+	row_add = hw_tile_stride << PAGE_SHIFT;
+	mb();
+	for (i = 0; i < rows; ++i) {
+
+		addr = address;
+		end = addr + add;
+
+		do {
+			next = psb_pd_addr_end(addr, end);
+			pt = psb_mmu_pt_map_lock(pd, addr);
+			if (!pt)
+				continue;
+			do {
+				psb_clflush(&pt->v
+					    [psb_mmu_pt_index(addr)]);
+			} while (addr +=
+				 clflush_add,
+				 (addr & clflush_mask) < next);
+
+			psb_mmu_pt_unmap_unlock(pt);
+		} while (addr = next, next != end);
+		address += row_add;
+	}
+	mb();
+}
+
+void psb_mmu_remove_pfn_sequence(struct psb_mmu_pd *pd,
+				 unsigned long address, uint32_t num_pages)
+{
+	struct psb_mmu_pt *pt;
+	unsigned long addr;
+	unsigned long end;
+	unsigned long next;
+	unsigned long f_address = address;
+
+	down_read(&pd->driver->sem);
+
+	addr = address;
+	end = addr + (num_pages << PAGE_SHIFT);
+
+	do {
+		next = psb_pd_addr_end(addr, end);
+		pt = psb_mmu_pt_alloc_map_lock(pd, addr);
+		if (!pt)
+			goto out;
+		do {
+			psb_mmu_invalidate_pte(pt, addr);
+			--pt->count;
+		} while (addr += PAGE_SIZE, addr < next);
+		psb_mmu_pt_unmap_unlock(pt);
+
+	} while (addr = next, next != end);
+
+out:
+	if (pd->hw_context != -1)
+		psb_mmu_flush_ptes(pd, f_address, num_pages, 1, 1);
+
+	up_read(&pd->driver->sem);
+
+	if (pd->hw_context != -1)
+		psb_mmu_flush(pd->driver, 0);
+
+	return;
+}
+
+void psb_mmu_remove_pages(struct psb_mmu_pd *pd, unsigned long address,
+			  uint32_t num_pages, uint32_t desired_tile_stride,
+			  uint32_t hw_tile_stride)
+{
+	struct psb_mmu_pt *pt;
+	uint32_t rows = 1;
+	uint32_t i;
+	unsigned long addr;
+	unsigned long end;
+	unsigned long next;
+	unsigned long add;
+	unsigned long row_add;
+	unsigned long f_address = address;
+
+	if (hw_tile_stride)
+		rows = num_pages / desired_tile_stride;
+	else
+		desired_tile_stride = num_pages;
+
+	add = desired_tile_stride << PAGE_SHIFT;
+	row_add = hw_tile_stride << PAGE_SHIFT;
+
+	/* down_read(&pd->driver->sem); */
+
+	/* Make sure we only need to flush this processor's cache */
+
+	for (i = 0; i < rows; ++i) {
+
+		addr = address;
+		end = addr + add;
+
+		do {
+			next = psb_pd_addr_end(addr, end);
+			pt = psb_mmu_pt_map_lock(pd, addr);
+			if (!pt)
+				continue;
+			do {
+				psb_mmu_invalidate_pte(pt, addr);
+				--pt->count;
+
+			} while (addr += PAGE_SIZE, addr < next);
+			psb_mmu_pt_unmap_unlock(pt);
+
+		} while (addr = next, next != end);
+		address += row_add;
+	}
+	if (pd->hw_context != -1)
+		psb_mmu_flush_ptes(pd, f_address, num_pages,
+				   desired_tile_stride, hw_tile_stride);
+
+	/* up_read(&pd->driver->sem); */
+
+	if (pd->hw_context != -1)
+		psb_mmu_flush(pd->driver, 0);
+}
+
+int psb_mmu_insert_pfn_sequence(struct psb_mmu_pd *pd, uint32_t start_pfn,
+				unsigned long address, uint32_t num_pages,
+				int type)
+{
+	struct psb_mmu_pt *pt;
+	uint32_t pte;
+	unsigned long addr;
+	unsigned long end;
+	unsigned long next;
+	unsigned long f_address = address;
+	int ret = 0;
+
+	down_read(&pd->driver->sem);
+
+	addr = address;
+	end = addr + (num_pages << PAGE_SHIFT);
+
+	do {
+		next = psb_pd_addr_end(addr, end);
+		pt = psb_mmu_pt_alloc_map_lock(pd, addr);
+		if (!pt) {
+			ret = -ENOMEM;
+			goto out;
+		}
+		do {
+			pte = psb_mmu_mask_pte(start_pfn++, type);
+			psb_mmu_set_pte(pt, addr, pte);
+			pt->count++;
+		} while (addr += PAGE_SIZE, addr < next);
+		psb_mmu_pt_unmap_unlock(pt);
+
+	} while (addr = next, next != end);
+
+out:
+	if (pd->hw_context != -1)
+		psb_mmu_flush_ptes(pd, f_address, num_pages, 1, 1);
+
+	up_read(&pd->driver->sem);
+
+	if (pd->hw_context != -1)
+		psb_mmu_flush(pd->driver, 1);
+
+	return ret;
+}
+
+int psb_mmu_insert_pages(struct psb_mmu_pd *pd, struct page **pages,
+			 unsigned long address, uint32_t num_pages,
+			 uint32_t desired_tile_stride,
+			 uint32_t hw_tile_stride, int type)
+{
+	struct psb_mmu_pt *pt;
+	uint32_t rows = 1;
+	uint32_t i;
+	uint32_t pte;
+	unsigned long addr;
+	unsigned long end;
+	unsigned long next;
+	unsigned long add;
+	unsigned long row_add;
+	unsigned long f_address = address;
+	int ret = 0;
+
+	if (hw_tile_stride) {
+		if (num_pages % desired_tile_stride != 0)
+			return -EINVAL;
+		rows = num_pages / desired_tile_stride;
+	} else {
+		desired_tile_stride = num_pages;
+	}
+
+	add = desired_tile_stride << PAGE_SHIFT;
+	row_add = hw_tile_stride << PAGE_SHIFT;
+
+	down_read(&pd->driver->sem);
+
+	for (i = 0; i < rows; ++i) {
+
+		addr = address;
+		end = addr + add;
+
+		do {
+			next = psb_pd_addr_end(addr, end);
+			pt = psb_mmu_pt_alloc_map_lock(pd, addr);
+			if (!pt) {
+				ret = -ENOMEM;
+				goto out;
+			}
+			do {
+				pte =
+				    psb_mmu_mask_pte(page_to_pfn(*pages++),
+						     type);
+				psb_mmu_set_pte(pt, addr, pte);
+				pt->count++;
+			} while (addr += PAGE_SIZE, addr < next);
+			psb_mmu_pt_unmap_unlock(pt);
+
+		} while (addr = next, next != end);
+
+		address += row_add;
+	}
+out:
+	if (pd->hw_context != -1)
+		psb_mmu_flush_ptes(pd, f_address, num_pages,
+				   desired_tile_stride, hw_tile_stride);
+
+	up_read(&pd->driver->sem);
+
+	if (pd->hw_context != -1)
+		psb_mmu_flush(pd->driver, 1);
+
+	return ret;
+}
+
+int psb_mmu_virtual_to_pfn(struct psb_mmu_pd *pd, uint32_t virtual,
+			   unsigned long *pfn)
+{
+	int ret;
+	struct psb_mmu_pt *pt;
+	uint32_t tmp;
+	spinlock_t *lock = &pd->driver->lock;
+
+	down_read(&pd->driver->sem);
+	pt = psb_mmu_pt_map_lock(pd, virtual);
+	if (!pt) {
+		uint32_t *v;
+
+		spin_lock(lock);
+		v = kmap_atomic(pd->p, KM_USER0);
+		tmp = v[psb_mmu_pd_index(virtual)];
+		kunmap_atomic(v, KM_USER0);
+		spin_unlock(lock);
+
+		if (tmp != pd->invalid_pde || !(tmp & PSB_PTE_VALID) ||
+		    !(pd->invalid_pte & PSB_PTE_VALID)) {
+			ret = -EINVAL;
+			goto out;
+		}
+		ret = 0;
+		*pfn = pd->invalid_pte >> PAGE_SHIFT;
+		goto out;
+	}
+	tmp = pt->v[psb_mmu_pt_index(virtual)];
+	if (!(tmp & PSB_PTE_VALID)) {
+		ret = -EINVAL;
+	} else {
+		ret = 0;
+		*pfn = tmp >> PAGE_SHIFT;
+	}
+	psb_mmu_pt_unmap_unlock(pt);
+out:
+	up_read(&pd->driver->sem);
+	return ret;
+}

[PATCH 04/12] gma500: introduce the framebuffer support code

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

We support 2D acceleration on some devices but we try and do tricks with
the GTT as a starting point as this is far faster. The GTT logic could be
improved further but for most display sizes it already makes a pretty good
decision.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/accel_2d.c    |  362 ++++++++++++++++
 drivers/gpu/drm/gma500/framebuffer.c |  784 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/gma500/framebuffer.h |   48 ++
 3 files changed, 1194 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpu/drm/gma500/accel_2d.c
 create mode 100644 drivers/gpu/drm/gma500/framebuffer.c
 create mode 100644 drivers/gpu/drm/gma500/framebuffer.h


diff --git a/drivers/gpu/drm/gma500/accel_2d.c b/drivers/gpu/drm/gma500/accel_2d.c
new file mode 100644
index 0000000..305e6f9
--- /dev/null
+++ b/drivers/gpu/drm/gma500/accel_2d.c
@@ -0,0 +1,362 @@
+/**************************************************************************
+ * Copyright (c) 2007-2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
+ * develop this driver.
+ *
+ **************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/console.h>
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include <drm/drm_crtc.h>
+
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "framebuffer.h"
+
+/**
+ *	psb_spank		-	reset the 2D engine
+ *	@dev_priv: our PSB DRM device
+ *
+ *	Soft reset the graphics engine and then reload the necessary registers.
+ *	We use this at initialisation time but it will become relevant for
+ *	accelerated X later
+ */
+void psb_spank(struct drm_psb_private *dev_priv)
+{
+	PSB_WSGX32(_PSB_CS_RESET_BIF_RESET | _PSB_CS_RESET_DPM_RESET |
+		_PSB_CS_RESET_TA_RESET | _PSB_CS_RESET_USE_RESET |
+		_PSB_CS_RESET_ISP_RESET | _PSB_CS_RESET_TSP_RESET |
+		_PSB_CS_RESET_TWOD_RESET, PSB_CR_SOFT_RESET);
+	PSB_RSGX32(PSB_CR_SOFT_RESET);
+
+	msleep(1);
+
+	PSB_WSGX32(0, PSB_CR_SOFT_RESET);
+	wmb();
+	PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) | _PSB_CB_CTRL_CLEAR_FAULT,
+		   PSB_CR_BIF_CTRL);
+	wmb();
+	(void) PSB_RSGX32(PSB_CR_BIF_CTRL);
+
+	msleep(1);
+	PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) & ~_PSB_CB_CTRL_CLEAR_FAULT,
+		   PSB_CR_BIF_CTRL);
+	(void) PSB_RSGX32(PSB_CR_BIF_CTRL);
+	PSB_WSGX32(dev_priv->gtt.gatt_start, PSB_CR_BIF_TWOD_REQ_BASE);
+}
+
+/**
+ *	psb2_2d_wait_available	-	wait for FIFO room
+ *	@dev_priv: our DRM device
+ *	@size: size (in dwords) of the command we want to issue
+ *
+ *	Wait until there is room to load the FIFO with our data. If the
+ *	device is not responding then reset it
+ */
+static int psb_2d_wait_available(struct drm_psb_private *dev_priv,
+			  unsigned size)
+{
+	uint32_t avail = PSB_RSGX32(PSB_CR_2D_SOCIF);
+	unsigned long t = jiffies + HZ;
+
+	while (avail < size) {
+		avail = PSB_RSGX32(PSB_CR_2D_SOCIF);
+		if (time_after(jiffies, t)) {
+			psb_spank(dev_priv);
+			return -EIO;
+		}
+	}
+	return 0;
+}
+
+/**
+ *	psb_2d_submit		-	submit a 2D command
+ *	@dev_priv: our DRM device
+ *	@cmdbuf: command to issue
+ *	@size: length (in dwords)
+ *
+ *	Issue one or more 2D commands to the accelerator. This needs to be
+ *	serialized later when we add the GEM interfaces for acceleration
+ */
+static int psbfb_2d_submit(struct drm_psb_private *dev_priv, uint32_t *cmdbuf,
+								unsigned size)
+{
+	int ret = 0;
+	int i;
+	unsigned submit_size;
+
+	mutex_lock(&dev_priv->mutex_2d);
+	while (size > 0) {
+		submit_size = (size < 0x60) ? size : 0x60;
+		size -= submit_size;
+		ret = psb_2d_wait_available(dev_priv, submit_size);
+		if (ret)
+		        break;
+
+		submit_size <<= 2;
+
+		for (i = 0; i < submit_size; i += 4)
+			PSB_WSGX32(*cmdbuf++, PSB_SGX_2D_SLAVE_PORT + i);
+
+		(void)PSB_RSGX32(PSB_SGX_2D_SLAVE_PORT + i - 4);
+	}
+	mutex_unlock(&dev_priv->mutex_2d);
+	return ret;
+}
+
+
+/**
+ *	psb_accel_2d_copy_direction	-	compute blit order
+ *	@xdir: X direction of move
+ *	@ydir: Y direction of move
+ *
+ *	Compute the correct order setings to ensure that an overlapping blit
+ *	correctly copies all the pixels.
+ */
+static u32 psb_accel_2d_copy_direction(int xdir, int ydir)
+{
+	if (xdir < 0)
+		return (ydir < 0) ? PSB_2D_COPYORDER_BR2TL :
+						PSB_2D_COPYORDER_TR2BL;
+	else
+		return (ydir < 0) ? PSB_2D_COPYORDER_BL2TR :
+						PSB_2D_COPYORDER_TL2BR;
+}
+
+/**
+ *	psb_accel_2d_copy		-	accelerated 2D copy
+ *	@dev_priv: our DRM device
+ *	@src_offset in bytes
+ *	@src_stride in bytes
+ *	@src_format psb 2D format defines
+ *	@dst_offset in bytes
+ *	@dst_stride in bytes
+ *	@dst_format psb 2D format defines
+ *	@src_x offset in pixels
+ *	@src_y offset in pixels
+ *	@dst_x offset in pixels
+ *	@dst_y offset in pixels
+ *	@size_x of the copied area
+ *	@size_y of the copied area
+ *
+ *	Format and issue a 2D accelerated copy command.
+ */
+static int psb_accel_2d_copy(struct drm_psb_private *dev_priv,
+			     uint32_t src_offset, uint32_t src_stride,
+			     uint32_t src_format, uint32_t dst_offset,
+			     uint32_t dst_stride, uint32_t dst_format,
+			     uint16_t src_x, uint16_t src_y,
+			     uint16_t dst_x, uint16_t dst_y,
+			     uint16_t size_x, uint16_t size_y)
+{
+	uint32_t blit_cmd;
+	uint32_t buffer[10];
+	uint32_t *buf;
+	uint32_t direction;
+
+	buf = buffer;
+
+	direction =
+	    psb_accel_2d_copy_direction(src_x - dst_x, src_y - dst_y);
+
+	if (direction == PSB_2D_COPYORDER_BR2TL ||
+	    direction == PSB_2D_COPYORDER_TR2BL) {
+		src_x += size_x - 1;
+		dst_x += size_x - 1;
+	}
+	if (direction == PSB_2D_COPYORDER_BR2TL ||
+	    direction == PSB_2D_COPYORDER_BL2TR) {
+		src_y += size_y - 1;
+		dst_y += size_y - 1;
+	}
+
+	blit_cmd =
+	    PSB_2D_BLIT_BH |
+	    PSB_2D_ROT_NONE |
+	    PSB_2D_DSTCK_DISABLE |
+	    PSB_2D_SRCCK_DISABLE |
+	    PSB_2D_USE_PAT | PSB_2D_ROP3_SRCCOPY | direction;
+
+	*buf++ = PSB_2D_FENCE_BH;
+	*buf++ =
+	    PSB_2D_DST_SURF_BH | dst_format | (dst_stride <<
+					       PSB_2D_DST_STRIDE_SHIFT);
+	*buf++ = dst_offset;
+	*buf++ =
+	    PSB_2D_SRC_SURF_BH | src_format | (src_stride <<
+					       PSB_2D_SRC_STRIDE_SHIFT);
+	*buf++ = src_offset;
+	*buf++ =
+	    PSB_2D_SRC_OFF_BH | (src_x << PSB_2D_SRCOFF_XSTART_SHIFT) |
+	    (src_y << PSB_2D_SRCOFF_YSTART_SHIFT);
+	*buf++ = blit_cmd;
+	*buf++ =
+	    (dst_x << PSB_2D_DST_XSTART_SHIFT) | (dst_y <<
+						  PSB_2D_DST_YSTART_SHIFT);
+	*buf++ =
+	    (size_x << PSB_2D_DST_XSIZE_SHIFT) | (size_y <<
+						  PSB_2D_DST_YSIZE_SHIFT);
+	*buf++ = PSB_2D_FLUSH_BH;
+
+	return psbfb_2d_submit(dev_priv, buffer, buf - buffer);
+}
+
+/**
+ *	psbfb_copyarea_accel	-	copyarea acceleration for /dev/fb
+ *	@info: our framebuffer
+ *	@a: copyarea parameters from the framebuffer core
+ *
+ *	Perform a 2D copy via the accelerator
+ */
+static void psbfb_copyarea_accel(struct fb_info *info,
+				 const struct fb_copyarea *a)
+{
+	struct psb_fbdev *fbdev = info->par;
+	struct psb_framebuffer *psbfb = &fbdev->pfb;
+	struct drm_device *dev = psbfb->base.dev;
+	struct drm_framebuffer *fb = fbdev->psb_fb_helper.fb;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	uint32_t offset;
+	uint32_t stride;
+	uint32_t src_format;
+	uint32_t dst_format;
+
+	if (!fb)
+		return;
+
+	offset = psbfb->gtt->offset;
+	stride = fb->pitch;
+
+	switch (fb->depth) {
+	case 8:
+		src_format = PSB_2D_SRC_332RGB;
+		dst_format = PSB_2D_DST_332RGB;
+		break;
+	case 15:
+		src_format = PSB_2D_SRC_555RGB;
+		dst_format = PSB_2D_DST_555RGB;
+		break;
+	case 16:
+		src_format = PSB_2D_SRC_565RGB;
+		dst_format = PSB_2D_DST_565RGB;
+		break;
+	case 24:
+	case 32:
+		/* this is wrong but since we don't do blending its okay */
+		src_format = PSB_2D_SRC_8888ARGB;
+		dst_format = PSB_2D_DST_8888ARGB;
+		break;
+	default:
+		/* software fallback */
+		cfb_copyarea(info, a);
+		return;
+	}
+
+	if (!gma_power_begin(dev, false)) {
+		cfb_copyarea(info, a);
+		return;
+	}
+	psb_accel_2d_copy(dev_priv,
+			  offset, stride, src_format,
+			  offset, stride, dst_format,
+			  a->sx, a->sy, a->dx, a->dy, a->width, a->height);
+	gma_power_end(dev);
+}
+
+/**
+ *	psbfb_copyarea	-	2D copy interface
+ *	@info: our framebuffer
+ *	@region: region to copy
+ *
+ *	Copy an area of the framebuffer console either by the accelerator
+ *	or directly using the cfb helpers according to the request
+ */
+void psbfb_copyarea(struct fb_info *info,
+			   const struct fb_copyarea *region)
+{
+	if (unlikely(info->state != FBINFO_STATE_RUNNING))
+		return;
+
+	/* Avoid the 8 pixel erratum */
+	if (region->width == 8 || region->height == 8 ||
+		(info->flags & FBINFO_HWACCEL_DISABLED))
+		return cfb_copyarea(info, region);
+
+	psbfb_copyarea_accel(info, region);
+}
+
+/**
+ *	psbfb_sync	-	synchronize 2D
+ *	@info: our framebuffer
+ *
+ *	Wait for the 2D engine to quiesce so that we can do CPU
+ *	access to the framebuffer again
+ */
+int psbfb_sync(struct fb_info *info)
+{
+	struct psb_fbdev *fbdev = info->par;
+	struct psb_framebuffer *psbfb = &fbdev->pfb;
+	struct drm_device *dev = psbfb->base.dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	unsigned long _end = jiffies + DRM_HZ;
+	int busy = 0;
+
+	mutex_lock(&dev_priv->mutex_2d);
+	/*
+	 * First idle the 2D engine.
+	 */
+
+	if ((PSB_RSGX32(PSB_CR_2D_SOCIF) == _PSB_C2_SOCIF_EMPTY) &&
+	    ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) & _PSB_C2B_STATUS_BUSY) == 0))
+		goto out;
+
+	do {
+		busy = (PSB_RSGX32(PSB_CR_2D_SOCIF) != _PSB_C2_SOCIF_EMPTY);
+		cpu_relax();
+	} while (busy && !time_after_eq(jiffies, _end));
+
+	if (busy)
+		busy = (PSB_RSGX32(PSB_CR_2D_SOCIF) != _PSB_C2_SOCIF_EMPTY);
+	if (busy)
+		goto out;
+
+	do {
+		busy = ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) &
+						_PSB_C2B_STATUS_BUSY) != 0);
+		cpu_relax();
+	} while (busy && !time_after_eq(jiffies, _end));
+	if (busy)
+		busy = ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) &
+					_PSB_C2B_STATUS_BUSY) != 0);
+
+out:
+	mutex_unlock(&dev_priv->mutex_2d);
+	return (busy) ? -EBUSY : 0;
+}
diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c
new file mode 100644
index 0000000..61ed7b2
--- /dev/null
+++ b/drivers/gpu/drm/gma500/framebuffer.c
@@ -0,0 +1,784 @@
+/**************************************************************************
+ * Copyright (c) 2007-2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/console.h>
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include <drm/drm_crtc.h>
+
+#include "psb_drv.h"
+#include "psb_intel_reg.h"
+#include "psb_intel_drv.h"
+#include "framebuffer.h"
+
+static void psb_user_framebuffer_destroy(struct drm_framebuffer *fb);
+static int psb_user_framebuffer_create_handle(struct drm_framebuffer *fb,
+					      struct drm_file *file_priv,
+					      unsigned int *handle);
+
+static const struct drm_framebuffer_funcs psb_fb_funcs = {
+	.destroy = psb_user_framebuffer_destroy,
+	.create_handle = psb_user_framebuffer_create_handle,
+};
+
+#define CMAP_TOHW(_val, _width) ((((_val) << (_width)) + 0x7FFF - (_val)) >> 16)
+
+static int psbfb_setcolreg(unsigned regno, unsigned red, unsigned green,
+			   unsigned blue, unsigned transp,
+			   struct fb_info *info)
+{
+	struct psb_fbdev *fbdev = info->par;
+	struct drm_framebuffer *fb = fbdev->psb_fb_helper.fb;
+	uint32_t v;
+
+	if (!fb)
+		return -ENOMEM;
+
+	if (regno > 255)
+		return 1;
+
+	red = CMAP_TOHW(red, info->var.red.length);
+	blue = CMAP_TOHW(blue, info->var.blue.length);
+	green = CMAP_TOHW(green, info->var.green.length);
+	transp = CMAP_TOHW(transp, info->var.transp.length);
+
+	v = (red << info->var.red.offset) |
+	    (green << info->var.green.offset) |
+	    (blue << info->var.blue.offset) |
+	    (transp << info->var.transp.offset);
+
+	if (regno < 16) {
+		switch (fb->bits_per_pixel) {
+		case 16:
+			((uint32_t *) info->pseudo_palette)[regno] = v;
+			break;
+		case 24:
+		case 32:
+			((uint32_t *) info->pseudo_palette)[regno] = v;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+
+void psbfb_suspend(struct drm_device *dev)
+{
+	struct drm_framebuffer *fb = 0;
+	struct psb_framebuffer *psbfb = to_psb_fb(fb);
+
+	console_lock();
+	mutex_lock(&dev->mode_config.mutex);
+	list_for_each_entry(fb, &dev->mode_config.fb_list, head) {
+		struct fb_info *info = psbfb->fbdev;
+		fb_set_suspend(info, 1);
+		drm_fb_helper_blank(FB_BLANK_POWERDOWN, info);
+	}
+	mutex_unlock(&dev->mode_config.mutex);
+	console_unlock();
+}
+
+void psbfb_resume(struct drm_device *dev)
+{
+	struct drm_framebuffer *fb = 0;
+	struct psb_framebuffer *psbfb = to_psb_fb(fb);
+
+	console_lock();
+	mutex_lock(&dev->mode_config.mutex);
+	list_for_each_entry(fb, &dev->mode_config.fb_list, head) {
+		struct fb_info *info = psbfb->fbdev;
+		fb_set_suspend(info, 0);
+		drm_fb_helper_blank(FB_BLANK_UNBLANK, info);
+	}
+	mutex_unlock(&dev->mode_config.mutex);
+	console_unlock();
+	drm_helper_disable_unused_functions(dev);
+}
+
+static int psbfb_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct psb_framebuffer *psbfb = vma->vm_private_data;
+	struct drm_device *dev = psbfb->base.dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int page_num;
+	int i;
+	unsigned long address;
+	int ret;
+	unsigned long pfn;
+	/* FIXME: assumes fb at stolen base which may not be true */
+	unsigned long phys_addr = (unsigned long)dev_priv->stolen_base;
+
+	page_num = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
+	address = (unsigned long)vmf->virtual_address;
+
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	for (i = 0; i < page_num; i++) {
+		pfn = (phys_addr >> PAGE_SHIFT);
+
+		ret = vm_insert_mixed(vma, address, pfn);
+		if (unlikely((ret == -EBUSY) || (ret != 0 && i > 0)))
+			break;
+		else if (unlikely(ret != 0)) {
+			ret = (ret == -ENOMEM) ? VM_FAULT_OOM : VM_FAULT_SIGBUS;
+			return ret;
+		}
+		address += PAGE_SIZE;
+		phys_addr += PAGE_SIZE;
+	}
+	return VM_FAULT_NOPAGE;
+}
+
+static void psbfb_vm_open(struct vm_area_struct *vma)
+{
+}
+
+static void psbfb_vm_close(struct vm_area_struct *vma)
+{
+}
+
+static struct vm_operations_struct psbfb_vm_ops = {
+	.fault	= psbfb_vm_fault,
+	.open	= psbfb_vm_open,
+	.close	= psbfb_vm_close
+};
+
+static int psbfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+	struct psb_fbdev *fbdev = info->par;
+	struct psb_framebuffer *psbfb = &fbdev->pfb;
+
+	if (vma->vm_pgoff != 0)
+		return -EINVAL;
+	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+		return -EINVAL;
+
+	if (!psbfb->addr_space)
+		psbfb->addr_space = vma->vm_file->f_mapping;
+	/*
+	 * If this is a GEM object then info->screen_base is the virtual
+	 * kernel remapping of the object. FIXME: Review if this is
+	 * suitable for our mmap work
+	 */
+	vma->vm_ops = &psbfb_vm_ops;
+	vma->vm_private_data = (void *)psbfb;
+	vma->vm_flags |= VM_RESERVED | VM_IO |
+					VM_MIXEDMAP | VM_DONTEXPAND;
+	return 0;
+}
+
+static int psbfb_ioctl(struct fb_info *info, unsigned int cmd,
+						unsigned long arg)
+{
+	return -ENOTTY;
+}
+
+static struct fb_ops psbfb_ops = {
+	.owner = THIS_MODULE,
+	.fb_check_var = drm_fb_helper_check_var,
+	.fb_set_par = drm_fb_helper_set_par,
+	.fb_blank = drm_fb_helper_blank,
+	.fb_setcolreg = psbfb_setcolreg,
+	.fb_fillrect = cfb_fillrect,
+	.fb_copyarea = psbfb_copyarea,
+	.fb_imageblit = cfb_imageblit,
+	.fb_mmap = psbfb_mmap,
+	.fb_sync = psbfb_sync,
+	.fb_ioctl = psbfb_ioctl,
+};
+
+static struct fb_ops psbfb_unaccel_ops = {
+	.owner = THIS_MODULE,
+	.fb_check_var = drm_fb_helper_check_var,
+	.fb_set_par = drm_fb_helper_set_par,
+	.fb_blank = drm_fb_helper_blank,
+	.fb_setcolreg = psbfb_setcolreg,
+	.fb_fillrect = cfb_fillrect,
+	.fb_copyarea = cfb_copyarea,
+	.fb_imageblit = cfb_imageblit,
+	.fb_mmap = psbfb_mmap,
+	.fb_ioctl = psbfb_ioctl,
+};
+
+/**
+ *	psb_framebuffer_init	-	initialize a framebuffer
+ *	@dev: our DRM device
+ *	@fb: framebuffer to set up
+ *	@mode_cmd: mode description
+ *	@gt: backing object
+ *
+ *	Configure and fill in the boilerplate for our frame buffer. Return
+ *	0 on success or an error code if we fail.
+ */
+static int psb_framebuffer_init(struct drm_device *dev,
+					struct psb_framebuffer *fb,
+					struct drm_mode_fb_cmd *mode_cmd,
+					struct gtt_range *gt)
+{
+	int ret;
+
+	if (mode_cmd->pitch & 63)
+		return -EINVAL;
+	switch (mode_cmd->bpp) {
+	case 8:
+	case 16:
+	case 24:
+	case 32:
+		break;
+	default:
+		return -EINVAL;
+	}
+	ret = drm_framebuffer_init(dev, &fb->base, &psb_fb_funcs);
+	if (ret) {
+		dev_err(dev->dev, "framebuffer init failed: %d\n", ret);
+		return ret;
+	}
+	drm_helper_mode_fill_fb_struct(&fb->base, mode_cmd);
+	fb->gtt = gt;
+	return 0;
+}
+
+/**
+ *	psb_framebuffer_create	-	create a framebuffer backed by gt
+ *	@dev: our DRM device
+ *	@mode_cmd: the description of the requested mode
+ *	@gt: the backing object
+ *
+ *	Create a framebuffer object backed by the gt, and fill in the
+ *	boilerplate required
+ *
+ *	TODO: review object references
+ */
+
+static struct drm_framebuffer *psb_framebuffer_create
+			(struct drm_device *dev,
+			 struct drm_mode_fb_cmd *mode_cmd,
+			 struct gtt_range *gt)
+{
+	struct psb_framebuffer *fb;
+	int ret;
+
+	fb = kzalloc(sizeof(*fb), GFP_KERNEL);
+	if (!fb)
+		return ERR_PTR(-ENOMEM);
+
+	ret = psb_framebuffer_init(dev, fb, mode_cmd, gt);
+	if (ret) {
+		kfree(fb);
+		return ERR_PTR(ret);
+	}
+	return &fb->base;
+}
+
+/**
+ *	psbfb_alloc		-	allocate frame buffer memory
+ *	@dev: the DRM device
+ *	@aligned_size: space needed
+ *
+ *	Allocate the frame buffer. In the usual case we get a GTT range that
+ *	is stolen memory backed and life is simple. If there isn't sufficient
+ *	stolen memory or the system has no stolen memory we allocate a range
+ *	and back it with a GEM object.
+ *
+ *	In this case the GEM object has no handle.
+ *
+ *	FIXME: console speed up - allocate twice the space if room and use
+ *	hardware scrolling for acceleration.
+ */
+static struct gtt_range *psbfb_alloc(struct drm_device *dev, int aligned_size)
+{
+	struct gtt_range *backing;
+	/* Begin by trying to use stolen memory backing */
+	backing = psb_gtt_alloc_range(dev, aligned_size, "fb", 1);
+	if (backing) {
+		if (drm_gem_private_object_init(dev,
+					&backing->gem, aligned_size) == 0)
+			return backing;
+		psb_gtt_free_range(dev, backing);
+	}
+	/* Next try using GEM host memory */
+	backing = psb_gtt_alloc_range(dev, aligned_size, "fb(gem)", 0);
+	if (backing == NULL)
+		return NULL;
+
+	/* Now back it with an object */
+	if (drm_gem_object_init(dev, &backing->gem, aligned_size) != 0) {
+		psb_gtt_free_range(dev, backing);
+		return NULL;
+	}
+	return backing;
+}
+
+/**
+ *	psbfb_create		-	create a framebuffer
+ *	@fbdev: the framebuffer device
+ *	@sizes: specification of the layout
+ *
+ *	Create a framebuffer to the specifications provided
+ */
+static int psbfb_create(struct psb_fbdev *fbdev,
+				struct drm_fb_helper_surface_size *sizes)
+{
+	struct drm_device *dev = fbdev->psb_fb_helper.dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct fb_info *info;
+	struct drm_framebuffer *fb;
+	struct psb_framebuffer *psbfb = &fbdev->pfb;
+	struct drm_mode_fb_cmd mode_cmd;
+	struct device *device = &dev->pdev->dev;
+	int size;
+	int ret;
+	struct gtt_range *backing;
+
+	mode_cmd.width = sizes->surface_width;
+	mode_cmd.height = sizes->surface_height;
+	mode_cmd.bpp = sizes->surface_bpp;
+
+	/* No 24bit packed */
+	if (mode_cmd.bpp == 24)
+		mode_cmd.bpp = 32;
+
+	/* HW requires pitch to be 64 byte aligned */
+	mode_cmd.pitch =  ALIGN(mode_cmd.width * ((mode_cmd.bpp + 7) / 8), 64);
+	mode_cmd.depth = sizes->surface_depth;
+
+	size = mode_cmd.pitch * mode_cmd.height;
+	size = ALIGN(size, PAGE_SIZE);
+
+	/* Allocate the framebuffer in the GTT with stolen page backing */
+	backing = psbfb_alloc(dev, size);
+	if (backing == NULL)
+		return -ENOMEM;
+
+	mutex_lock(&dev->struct_mutex);
+
+	info = framebuffer_alloc(0, device);
+	if (!info) {
+		ret = -ENOMEM;
+		goto out_err1;
+	}
+	info->par = fbdev;
+
+	ret = psb_framebuffer_init(dev, psbfb, &mode_cmd, backing);
+	if (ret)
+		goto out_unref;
+
+	fb = &psbfb->base;
+	psbfb->fbdev = info;
+
+	fbdev->psb_fb_helper.fb = fb;
+	fbdev->psb_fb_helper.fbdev = info;
+
+	strcpy(info->fix.id, "psbfb");
+
+	info->flags = FBINFO_DEFAULT;
+	/* No 2D engine */
+	if (!dev_priv->ops->accel_2d)
+		info->fbops = &psbfb_unaccel_ops;
+	else
+		info->fbops = &psbfb_ops;
+
+	ret = fb_alloc_cmap(&info->cmap, 256, 0);
+	if (ret) {
+		ret = -ENOMEM;
+		goto out_unref;
+	}
+
+	info->fix.smem_start = dev->mode_config.fb_base;
+	info->fix.smem_len = size;
+
+	if (backing->stolen) {
+		/* Accessed stolen memory directly */
+		info->screen_base = (char *)dev_priv->vram_addr +
+							backing->offset;
+	} else {
+		/* Pin the pages into the GTT and create a mapping to them */
+		psb_gtt_pin(backing);
+		info->screen_base = vm_map_ram(backing->pages, backing->npage,
+				-1, PAGE_KERNEL);
+		if (info->screen_base == NULL) {
+			psb_gtt_unpin(backing);
+			ret = -ENOMEM;
+			goto out_unref;
+		}
+		psbfb->vm_map = 1;
+	}
+	info->screen_size = size;
+
+	if (dev_priv->gtt.stolen_size) {
+		info->apertures = alloc_apertures(1);
+		if (!info->apertures) {
+			ret = -ENOMEM;
+			goto out_unref;
+		}
+		info->apertures->ranges[0].base = dev->mode_config.fb_base;
+		info->apertures->ranges[0].size = dev_priv->gtt.stolen_size;
+	}
+
+	drm_fb_helper_fill_fix(info, fb->pitch, fb->depth);
+	drm_fb_helper_fill_var(info, &fbdev->psb_fb_helper,
+				sizes->fb_width, sizes->fb_height);
+
+	info->fix.mmio_start = pci_resource_start(dev->pdev, 0);
+	info->fix.mmio_len = pci_resource_len(dev->pdev, 0);
+
+	info->pixmap.size = 64 * 1024;
+	info->pixmap.buf_align = 8;
+	info->pixmap.access_align = 32;
+	info->pixmap.flags = FB_PIXMAP_SYSTEM;
+	info->pixmap.scan_align = 1;
+
+	dev_info(dev->dev, "allocated %dx%d fb\n",
+					psbfb->base.width, psbfb->base.height);
+
+	mutex_unlock(&dev->struct_mutex);
+	return 0;
+out_unref:
+	if (backing->stolen)
+		psb_gtt_free_range(dev, backing);
+	else {
+		if (psbfb->vm_map)
+			vm_unmap_ram(info->screen_base, backing->npage);
+		drm_gem_object_unreference(&backing->gem);
+	}
+out_err1:
+	mutex_unlock(&dev->struct_mutex);
+	psb_gtt_free_range(dev, backing);
+	return ret;
+}
+
+/**
+ *	psb_user_framebuffer_create	-	create framebuffer
+ *	@dev: our DRM device
+ *	@filp: client file
+ *	@cmd: mode request
+ *
+ *	Create a new framebuffer backed by a userspace GEM object
+ */
+static struct drm_framebuffer *psb_user_framebuffer_create
+			(struct drm_device *dev, struct drm_file *filp,
+			 struct drm_mode_fb_cmd *cmd)
+{
+	struct gtt_range *r;
+	struct drm_gem_object *obj;
+
+	/*
+	 *	Find the GEM object and thus the gtt range object that is
+	 *	to back this space
+	 */
+	obj = drm_gem_object_lookup(dev, filp, cmd->handle);
+	if (obj == NULL)
+		return ERR_PTR(-ENOENT);
+
+	/* Let the core code do all the work */
+	r = container_of(obj, struct gtt_range, gem);
+	return psb_framebuffer_create(dev, cmd, r);
+}
+
+static void psbfb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
+							u16 blue, int regno)
+{
+}
+
+static void psbfb_gamma_get(struct drm_crtc *crtc, u16 *red,
+					u16 *green, u16 *blue, int regno)
+{
+}
+
+static int psbfb_probe(struct drm_fb_helper *helper,
+				struct drm_fb_helper_surface_size *sizes)
+{
+	struct psb_fbdev *psb_fbdev = (struct psb_fbdev *)helper;
+	int new_fb = 0;
+	int ret;
+
+	if (!helper->fb) {
+		ret = psbfb_create(psb_fbdev, sizes);
+		if (ret)
+			return ret;
+		new_fb = 1;
+	}
+	return new_fb;
+}
+
+struct drm_fb_helper_funcs psb_fb_helper_funcs = {
+	.gamma_set = psbfb_gamma_set,
+	.gamma_get = psbfb_gamma_get,
+	.fb_probe = psbfb_probe,
+};
+
+int psb_fbdev_destroy(struct drm_device *dev, struct psb_fbdev *fbdev)
+{
+	struct fb_info *info;
+	struct psb_framebuffer *psbfb = &fbdev->pfb;
+
+	if (fbdev->psb_fb_helper.fbdev) {
+		info = fbdev->psb_fb_helper.fbdev;
+
+		/* If this is our base framebuffer then kill any virtual map
+		   for the framebuffer layer and unpin it */
+		if (psbfb->vm_map) {
+			vm_unmap_ram(info->screen_base, psbfb->gtt->npage);
+			psb_gtt_unpin(psbfb->gtt);
+		}
+		unregister_framebuffer(info);
+		if (info->cmap.len)
+			fb_dealloc_cmap(&info->cmap);
+		framebuffer_release(info);
+	}
+	drm_fb_helper_fini(&fbdev->psb_fb_helper);
+	drm_framebuffer_cleanup(&psbfb->base);
+
+	if (psbfb->gtt)
+		drm_gem_object_unreference(&psbfb->gtt->gem);
+	return 0;
+}
+
+int psb_fbdev_init(struct drm_device *dev)
+{
+	struct psb_fbdev *fbdev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	fbdev = kzalloc(sizeof(struct psb_fbdev), GFP_KERNEL);
+	if (!fbdev) {
+		dev_err(dev->dev, "no memory\n");
+		return -ENOMEM;
+	}
+
+	dev_priv->fbdev = fbdev;
+	fbdev->psb_fb_helper.funcs = &psb_fb_helper_funcs;
+
+	drm_fb_helper_init(dev, &fbdev->psb_fb_helper, dev_priv->ops->crtcs,
+							INTELFB_CONN_LIMIT);
+
+	drm_fb_helper_single_add_all_connectors(&fbdev->psb_fb_helper);
+	drm_fb_helper_initial_config(&fbdev->psb_fb_helper, 32);
+	return 0;
+}
+
+void psb_fbdev_fini(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (!dev_priv->fbdev)
+		return;
+
+	psb_fbdev_destroy(dev, dev_priv->fbdev);
+	kfree(dev_priv->fbdev);
+	dev_priv->fbdev = NULL;
+}
+
+static void psbfb_output_poll_changed(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct psb_fbdev *fbdev = (struct psb_fbdev *)dev_priv->fbdev;
+	drm_fb_helper_hotplug_event(&fbdev->psb_fb_helper);
+}
+
+/**
+ *	psb_user_framebuffer_create_handle - add hamdle to a framebuffer
+ *	@fb: framebuffer
+ *	@file_priv: our DRM file
+ *	@handle: returned handle
+ *
+ *	Our framebuffer object is a GTT range which also contains a GEM
+ *	object. We need to turn it into a handle for userspace. GEM will do
+ *	the work for us
+ */
+static int psb_user_framebuffer_create_handle(struct drm_framebuffer *fb,
+					      struct drm_file *file_priv,
+					      unsigned int *handle)
+{
+	struct psb_framebuffer *psbfb = to_psb_fb(fb);
+	struct gtt_range *r = psbfb->gtt;
+	return drm_gem_handle_create(file_priv, &r->gem, handle);
+}
+
+/**
+ *	psb_user_framebuffer_destroy	-	destruct user created fb
+ *	@fb: framebuffer
+ *
+ *	User framebuffers are backed by GEM objects so all we have to do is
+ *	clean up a bit and drop the reference, GEM will handle the fallout
+ */
+static void psb_user_framebuffer_destroy(struct drm_framebuffer *fb)
+{
+	struct psb_framebuffer *psbfb = to_psb_fb(fb);
+	struct gtt_range *r = psbfb->gtt;
+	struct drm_device *dev = fb->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct psb_fbdev *fbdev = dev_priv->fbdev;
+	struct drm_crtc *crtc;
+	int reset = 0;
+
+	/* Should never get stolen memory for a user fb */
+	WARN_ON(r->stolen);
+
+	/* Check if we are erroneously live */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
+		if (crtc->fb == fb)
+			reset = 1;
+
+	if (reset)
+		/*
+		 * Now force a sane response before we permit the DRM CRTC
+		 * layer to do stupid things like blank the display. Instead
+		 * we reset this framebuffer as if the user had forced a reset.
+		 * We must do this before the cleanup so that the DRM layer
+		 * doesn't get a chance to stick its oar in where it isn't
+		 * wanted.
+		 */
+		drm_fb_helper_restore_fbdev_mode(&fbdev->psb_fb_helper);
+
+	/* Let DRM do its clean up */
+	drm_framebuffer_cleanup(fb);
+	/*  We are no longer using the resource in GEM */
+	drm_gem_object_unreference_unlocked(&r->gem);
+	kfree(fb);
+}
+
+static const struct drm_mode_config_funcs psb_mode_funcs = {
+	.fb_create = psb_user_framebuffer_create,
+	.output_poll_changed = psbfb_output_poll_changed,
+};
+
+static int psb_create_backlight_property(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct drm_property *backlight;
+
+	if (dev_priv->backlight_property)
+		return 0;
+
+	backlight = drm_property_create(dev, DRM_MODE_PROP_RANGE,
+							"backlight", 2);
+	backlight->values[0] = 0;
+	backlight->values[1] = 100;
+
+	dev_priv->backlight_property = backlight;
+
+	return 0;
+}
+
+static void psb_setup_outputs(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct drm_connector *connector;
+
+	drm_mode_create_scaling_mode_property(dev);
+	psb_create_backlight_property(dev);
+
+	dev_priv->ops->output_init(dev);
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list,
+			    head) {
+		struct psb_intel_output *psb_intel_output =
+		    to_psb_intel_output(connector);
+		struct drm_encoder *encoder = &psb_intel_output->enc;
+		int crtc_mask = 0, clone_mask = 0;
+
+		/* valid crtcs */
+		switch (psb_intel_output->type) {
+		case INTEL_OUTPUT_ANALOG:
+			crtc_mask = (1 << 0);
+			clone_mask = (1 << INTEL_OUTPUT_ANALOG);
+			break;
+		case INTEL_OUTPUT_SDVO:
+			crtc_mask = ((1 << 0) | (1 << 1));
+			clone_mask = (1 << INTEL_OUTPUT_SDVO);
+			break;
+		case INTEL_OUTPUT_LVDS:
+			if (IS_MRST(dev))
+				crtc_mask = (1 << 0);
+			else
+				crtc_mask = (1 << 1);
+			clone_mask = (1 << INTEL_OUTPUT_LVDS);
+			break;
+		case INTEL_OUTPUT_MIPI:
+			crtc_mask = (1 << 0);
+			clone_mask = (1 << INTEL_OUTPUT_MIPI);
+			break;
+		case INTEL_OUTPUT_MIPI2:
+			crtc_mask = (1 << 2);
+			clone_mask = (1 << INTEL_OUTPUT_MIPI2);
+			break;
+		case INTEL_OUTPUT_HDMI:
+			if (IS_MFLD(dev))
+				crtc_mask = (1 << 1);
+			else	
+				crtc_mask = (1 << 0);
+			clone_mask = (1 << INTEL_OUTPUT_HDMI);
+			break;
+		}
+		encoder->possible_crtcs = crtc_mask;
+		encoder->possible_clones =
+		    psb_intel_connector_clones(dev, clone_mask);
+	}
+}
+
+void psb_modeset_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
+	int i;
+
+	drm_mode_config_init(dev);
+
+	dev->mode_config.min_width = 0;
+	dev->mode_config.min_height = 0;
+
+	dev->mode_config.funcs = (void *) &psb_mode_funcs;
+
+	/* set memory base */
+	/* MRST and PSB should use BAR 2*/
+	pci_read_config_dword(dev->pdev, PSB_BSM, (u32 *)
+					&(dev->mode_config.fb_base));
+
+	/* num pipes is 2 for PSB but 1 for Mrst */
+	for (i = 0; i < dev_priv->num_pipe; i++)
+		psb_intel_crtc_init(dev, i, mode_dev);
+
+	dev->mode_config.max_width = 2048;
+	dev->mode_config.max_height = 2048;
+
+	psb_setup_outputs(dev);
+}
+
+void psb_modeset_cleanup(struct drm_device *dev)
+{
+	mutex_lock(&dev->struct_mutex);
+
+	drm_kms_helper_poll_fini(dev);
+	psb_fbdev_fini(dev);
+	drm_mode_config_cleanup(dev);
+
+	mutex_unlock(&dev->struct_mutex);
+}
diff --git a/drivers/gpu/drm/gma500/framebuffer.h b/drivers/gpu/drm/gma500/framebuffer.h
new file mode 100644
index 0000000..d1b2289
--- /dev/null
+++ b/drivers/gpu/drm/gma500/framebuffer.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2008-2011, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *      Eric Anholt <eric@anholt.net>
+ *
+ */
+
+#ifndef _FRAMEBUFFER_H_
+#define _FRAMEBUFFER_H_
+
+#include <drm/drmP.h>
+#include <drm/drm_fb_helper.h>
+
+#include "psb_drv.h"
+
+struct psb_framebuffer {
+	struct drm_framebuffer base;
+	struct address_space *addr_space;
+	struct fb_info *fbdev;
+	struct gtt_range *gtt;
+	bool vm_map;		/* True if we must undo a vm_map_ram */
+};
+
+struct psb_fbdev {
+	struct drm_fb_helper psb_fb_helper;
+	struct psb_framebuffer pfb;
+};
+
+#define to_psb_fb(x) container_of(x, struct psb_framebuffer, base)
+
+extern int psb_intel_connector_clones(struct drm_device *dev, int type_mask);
+
+#endif
+

[PATCH 05/12] gma500: Add device framework

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

The devices have various internal differences so we have some abstractions
to hide the ugly differences and we then wrap them up in standard
interfaces. Add these bits

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/backlight.c |   49 ++++++
 drivers/gpu/drm/gma500/power.c     |  316 ++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/gma500/power.h     |   67 ++++++++
 3 files changed, 432 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpu/drm/gma500/backlight.c
 create mode 100644 drivers/gpu/drm/gma500/power.c
 create mode 100644 drivers/gpu/drm/gma500/power.h


diff --git a/drivers/gpu/drm/gma500/backlight.c b/drivers/gpu/drm/gma500/backlight.c
new file mode 100644
index 0000000..2079395
--- /dev/null
+++ b/drivers/gpu/drm/gma500/backlight.c
@@ -0,0 +1,49 @@
+/*
+ * GMA500 Backlight Interface
+ *
+ * Copyright (c) 2009-2011, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors: Eric Knopp
+ *
+ */
+
+#include "psb_drv.h"
+#include "psb_intel_reg.h"
+#include "psb_intel_drv.h"
+#include "intel_bios.h"
+#include "power.h"
+
+int gma_backlight_init(struct drm_device *dev)
+{
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	return dev_priv->ops->backlight_init(dev);
+#else
+	return 0;
+#endif
+}
+
+void gma_backlight_exit(struct drm_device *dev)
+{
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	if (dev_priv->backlight_device) {
+		dev_priv->backlight_device->props.brightness = 0;
+		backlight_update_status(dev_priv->backlight_device);
+		backlight_device_unregister(dev_priv->backlight_device);
+	}
+#endif
+}
diff --git a/drivers/gpu/drm/gma500/power.c b/drivers/gpu/drm/gma500/power.c
new file mode 100644
index 0000000..972bea7
--- /dev/null
+++ b/drivers/gpu/drm/gma500/power.c
@@ -0,0 +1,316 @@
+/**************************************************************************
+ * Copyright (c) 2009-2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Authors:
+ *    Benjamin Defnet <benjamin.r.defnet@intel.com>
+ *    Rajesh Poornachandran <rajesh.poornachandran@intel.com>
+ * Massively reworked
+ *    Alan Cox <alan@linux.intel.com>
+ */
+
+#include "power.h"
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+
+static struct mutex power_mutex;	/* Serialize power ops */
+static spinlock_t power_ctrl_lock;	/* Serialize power claim */
+
+/**
+ *	gma_power_init		-	initialise power manager
+ *	@dev: our device
+ *
+ *	Set up for power management tracking of our hardware.
+ */
+void gma_power_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	/* FIXME: Move APM/OSPM base into relevant device code */
+	dev_priv->apm_base = dev_priv->apm_reg & 0xffff;
+	dev_priv->ospm_base &= 0xffff;
+
+	dev_priv->display_power = true;	/* We start active */
+	dev_priv->display_count = 0;	/* Currently no users */
+	dev_priv->suspended = false;	/* And not suspended */
+	spin_lock_init(&power_ctrl_lock);
+	mutex_init(&power_mutex);
+
+	dev_priv->ops->init_pm(dev);
+}
+
+/**
+ *	gma_power_uninit	-	end power manager
+ *	@dev: device to end for
+ *
+ *	Undo the effects of gma_power_init
+ */
+void gma_power_uninit(struct drm_device *dev)
+{
+	pm_runtime_disable(&dev->pdev->dev);
+	pm_runtime_set_suspended(&dev->pdev->dev);
+}
+
+/**
+ *	gma_suspend_display	-	suspend the display logic
+ *	@dev: our DRM device
+ *
+ *	Suspend the display logic of the graphics interface
+ */
+static void gma_suspend_display(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->suspended)
+		return;
+	dev_priv->ops->save_regs(dev);
+	dev_priv->ops->power_down(dev);
+	dev_priv->display_power = false;
+}
+
+/**
+ *	gma_resume_display	-	resume display side logic
+ *
+ *	Resume the display hardware restoring state and enabling
+ *	as necessary.
+ */
+static void gma_resume_display(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->suspended == false)
+		return;
+
+	/* turn on the display power island */
+	dev_priv->ops->power_up(dev);
+	dev_priv->suspended = false;
+	dev_priv->display_power = true;
+
+	PSB_WVDC32(dev_priv->pge_ctl | _PSB_PGETBL_ENABLED, PSB_PGETBL_CTL);
+	pci_write_config_word(pdev, PSB_GMCH_CTRL,
+			dev_priv->gmch_ctrl | _PSB_GMCH_ENABLED);
+	dev_priv->ops->restore_regs(dev);
+}
+
+/**
+ *	gma_suspend_pci		-	suspend PCI side
+ *	@pdev: PCI device
+ *
+ *	Perform the suspend processing on our PCI device state
+ */
+static void gma_suspend_pci(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int bsm, vbt;
+
+	if (dev_priv->suspended)
+		return;
+
+	pci_save_state(pdev);
+	pci_read_config_dword(pdev, 0x5C, &bsm);
+	dev_priv->saveBSM = bsm;
+	pci_read_config_dword(pdev, 0xFC, &vbt);
+	dev_priv->saveVBT = vbt;
+	pci_read_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, &dev_priv->msi_addr);
+	pci_read_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, &dev_priv->msi_data);
+
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	dev_priv->suspended = true;
+}
+
+/**
+ *	gma_resume_pci		-	resume helper
+ *	@dev: our PCI device
+ *
+ *	Perform the resume processing on our PCI device state - rewrite
+ *	register state and re-enable the PCI device
+ */
+static bool gma_resume_pci(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int ret;
+
+	if (!dev_priv->suspended)
+		return true;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	pci_write_config_dword(pdev, 0x5c, dev_priv->saveBSM);
+	pci_write_config_dword(pdev, 0xFC, dev_priv->saveVBT);
+	/* restoring MSI address and data in PCIx space */
+	pci_write_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, dev_priv->msi_addr);
+	pci_write_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, dev_priv->msi_data);
+	ret = pci_enable_device(pdev);
+
+	if (ret != 0)
+		dev_err(&pdev->dev, "pci_enable failed: %d\n", ret);
+	else
+		dev_priv->suspended = false;
+	return !dev_priv->suspended;
+}
+
+/**
+ *	gma_power_suspend		-	bus callback for suspend
+ *	@pdev: our PCI device
+ *	@state: suspend type
+ *
+ *	Called back by the PCI layer during a suspend of the system. We
+ *	perform the necessary shut down steps and save enough state that
+ *	we can undo this when resume is called.
+ */
+int gma_power_suspend(struct device *_dev)
+{
+	struct pci_dev *pdev = container_of(_dev, struct pci_dev, dev);
+	struct drm_device *dev = pci_get_drvdata(pdev);
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	mutex_lock(&power_mutex);
+	if (!dev_priv->suspended) {
+		if (dev_priv->display_count) {
+			mutex_unlock(&power_mutex);
+			return -EBUSY;
+		}
+		psb_irq_uninstall(dev);
+		gma_suspend_display(dev);
+		gma_suspend_pci(pdev);
+	}
+	mutex_unlock(&power_mutex);
+	return 0;
+}
+
+/**
+ *	gma_power_resume		-	resume power
+ *	@pdev: PCI device
+ *
+ *	Resume the PCI side of the graphics and then the displays
+ */
+int gma_power_resume(struct device *_dev)
+{
+	struct pci_dev *pdev = container_of(_dev, struct pci_dev, dev);
+	struct drm_device *dev = pci_get_drvdata(pdev);
+
+	mutex_lock(&power_mutex);
+	gma_resume_pci(pdev);
+	gma_resume_display(pdev);
+	psb_irq_preinstall(dev);
+	psb_irq_postinstall(dev);
+	mutex_unlock(&power_mutex);
+	return 0;
+}
+
+/**
+ *	gma_power_is_on		-	returne true if power is on
+ *	@dev: our DRM device
+ *
+ *	Returns true if the display island power is on at this moment
+ */
+bool gma_power_is_on(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	return dev_priv->display_power;
+}
+
+/**
+ *	gma_power_begin		-	begin requiring power
+ *	@dev: our DRM device
+ *	@force_on: true to force power on
+ *
+ *	Begin an action that requires the display power island is enabled.
+ *	We refcount the islands.
+ */
+bool gma_power_begin(struct drm_device *dev, bool force_on)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&power_ctrl_lock, flags);
+	/* Power already on ? */
+	if (dev_priv->display_power) {
+		dev_priv->display_count++;
+		pm_runtime_get(&dev->pdev->dev);
+		spin_unlock_irqrestore(&power_ctrl_lock, flags);
+		return true;
+	}
+	if (force_on == false)
+		goto out_false;
+
+	/* Ok power up needed */
+	ret = gma_resume_pci(dev->pdev);
+	if (ret == 0) {
+		psb_irq_preinstall(dev);
+		psb_irq_postinstall(dev);
+		pm_runtime_get(&dev->pdev->dev);
+		dev_priv->display_count++;
+		spin_unlock_irqrestore(&power_ctrl_lock, flags);
+		return true;
+	}
+out_false:
+	spin_unlock_irqrestore(&power_ctrl_lock, flags);
+	return false;
+}
+
+/**
+ *	gma_power_end		-	end use of power
+ *	@dev: Our DRM device
+ *
+ *	Indicate that one of our gma_power_begin() requested periods when
+ *	the diplay island power is needed has completed.
+ */
+void gma_power_end(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	unsigned long flags;
+	spin_lock_irqsave(&power_ctrl_lock, flags);
+	dev_priv->display_count--;
+	WARN_ON(dev_priv->display_count < 0);
+	spin_unlock_irqrestore(&power_ctrl_lock, flags);
+	pm_runtime_put(&dev->pdev->dev);
+}
+
+int psb_runtime_suspend(struct device *dev)
+{
+	return gma_power_suspend(dev);
+}
+
+int psb_runtime_resume(struct device *dev)
+{
+	return 0;
+}
+
+int psb_runtime_idle(struct device *dev)
+{
+	struct drm_device *drmdev = pci_get_drvdata(to_pci_dev(dev));
+	struct drm_psb_private *dev_priv = drmdev->dev_private;
+	if (dev_priv->display_count)
+		return 0;
+	else
+		return 1;
+}
diff --git a/drivers/gpu/drm/gma500/power.h b/drivers/gpu/drm/gma500/power.h
new file mode 100644
index 0000000..1969d2e
--- /dev/null
+++ b/drivers/gpu/drm/gma500/power.h
@@ -0,0 +1,67 @@
+/**************************************************************************
+ * Copyright (c) 2009-2011, Intel Corporation.
+ * All Rights Reserved.
+
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Authors:
+ *    Benjamin Defnet <benjamin.r.defnet@intel.com>
+ *    Rajesh Poornachandran <rajesh.poornachandran@intel.com>
+ * Massively reworked
+ *    Alan Cox <alan@linux.intel.com>
+ */
+#ifndef _PSB_POWERMGMT_H_
+#define _PSB_POWERMGMT_H_
+
+#include <linux/pci.h>
+#include <drm/drmP.h>
+
+void gma_power_init(struct drm_device *dev);
+void gma_power_uninit(struct drm_device *dev);
+
+/*
+ * The kernel bus power management  will call these functions
+ */
+int gma_power_suspend(struct device *dev);
+int gma_power_resume(struct device *dev);
+
+/*
+ * These are the functions the driver should use to wrap all hw access
+ * (i.e. register reads and writes)
+ */
+bool gma_power_begin(struct drm_device *dev, bool force);
+void gma_power_end(struct drm_device *dev);
+
+/*
+ * Use this function to do an instantaneous check for if the hw is on.
+ * Only use this in cases where you know the mutex is already held such
+ * as in irq install/uninstall and you need to
+ * prevent a deadlock situation.  Otherwise use gma_power_begin().
+ */
+bool gma_power_is_on(struct drm_device *dev);
+
+/*
+ * GFX-Runtime PM callbacks
+ */
+int psb_runtime_suspend(struct device *dev);
+int psb_runtime_resume(struct device *dev);
+int psb_runtime_idle(struct device *dev);
+
+#endif /*_PSB_POWERMGMT_H_*/

[PATCH 06/12] gma500: Add the glue to the various BIOS and firmware interfaces

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

Some of this should one day become a library shared by i915 and gma500 I
suspct. Best however to deal with that later once it is all nice and
stably merged.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/intel_bios.c     |  303 ++++++++++++++++++++++
 drivers/gpu/drm/gma500/intel_bios.h     |  430 +++++++++++++++++++++++++++++++
 drivers/gpu/drm/gma500/intel_opregion.c |   80 ++++++
 drivers/gpu/drm/gma500/mid_bios.c       |  243 ++++++++++++++++++
 drivers/gpu/drm/gma500/mid_bios.h       |   21 ++
 5 files changed, 1077 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpu/drm/gma500/intel_bios.c
 create mode 100644 drivers/gpu/drm/gma500/intel_bios.h
 create mode 100644 drivers/gpu/drm/gma500/intel_opregion.c
 create mode 100644 drivers/gpu/drm/gma500/mid_bios.c
 create mode 100644 drivers/gpu/drm/gma500/mid_bios.h


diff --git a/drivers/gpu/drm/gma500/intel_bios.c b/drivers/gpu/drm/gma500/intel_bios.c
new file mode 100644
index 0000000..096757f
--- /dev/null
+++ b/drivers/gpu/drm/gma500/intel_bios.c
@@ -0,0 +1,303 @@
+/*
+ * Copyright (c) 2006 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "psb_drm.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "intel_bios.h"
+
+
+static void *find_section(struct bdb_header *bdb, int section_id)
+{
+	u8 *base = (u8 *)bdb;
+	int index = 0;
+	u16 total, current_size;
+	u8 current_id;
+
+	/* skip to first section */
+	index += bdb->header_size;
+	total = bdb->bdb_size;
+
+	/* walk the sections looking for section_id */
+	while (index < total) {
+		current_id = *(base + index);
+		index++;
+		current_size = *((u16 *)(base + index));
+		index += 2;
+		if (current_id == section_id)
+			return base + index;
+		index += current_size;
+	}
+
+	return NULL;
+}
+
+static void fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
+			struct lvds_dvo_timing *dvo_timing)
+{
+	panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) |
+		dvo_timing->hactive_lo;
+	panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay +
+		((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo);
+	panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start +
+		dvo_timing->hsync_pulse_width;
+	panel_fixed_mode->htotal = panel_fixed_mode->hdisplay +
+		((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo);
+
+	panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) |
+		dvo_timing->vactive_lo;
+	panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay +
+		dvo_timing->vsync_off;
+	panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start +
+		dvo_timing->vsync_pulse_width;
+	panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay +
+		((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo);
+	panel_fixed_mode->clock = dvo_timing->clock * 10;
+	panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
+
+	/* Some VBTs have bogus h/vtotal values */
+	if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
+		panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
+	if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
+		panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
+
+	drm_mode_set_name(panel_fixed_mode);
+}
+
+static void parse_backlight_data(struct drm_psb_private *dev_priv,
+				struct bdb_header *bdb)
+{
+	struct bdb_lvds_backlight *vbt_lvds_bl = NULL;
+	struct bdb_lvds_backlight *lvds_bl;
+	u8 p_type = 0;
+	void *bl_start = NULL;
+	struct bdb_lvds_options *lvds_opts
+				= find_section(bdb, BDB_LVDS_OPTIONS);
+
+	dev_priv->lvds_bl = NULL;
+
+	if (lvds_opts)
+		p_type = lvds_opts->panel_type;
+	else
+		return;
+
+	bl_start = find_section(bdb, BDB_LVDS_BACKLIGHT);
+	vbt_lvds_bl = (struct bdb_lvds_backlight *)(bl_start + 1) + p_type;
+
+	lvds_bl = kzalloc(sizeof(*vbt_lvds_bl), GFP_KERNEL);
+	if (!lvds_bl) {
+		dev_err(dev_priv->dev->dev, "out of memory for backlight data\n");
+		return;
+	}
+	memcpy(lvds_bl, vbt_lvds_bl, sizeof(*vbt_lvds_bl));
+	dev_priv->lvds_bl = lvds_bl;
+}
+
+/* Try to find integrated panel data */
+static void parse_lfp_panel_data(struct drm_psb_private *dev_priv,
+			    struct bdb_header *bdb)
+{
+	struct bdb_lvds_options *lvds_options;
+	struct bdb_lvds_lfp_data *lvds_lfp_data;
+	struct bdb_lvds_lfp_data_entry *entry;
+	struct lvds_dvo_timing *dvo_timing;
+	struct drm_display_mode *panel_fixed_mode;
+
+	/* Defaults if we can't find VBT info */
+	dev_priv->lvds_dither = 0;
+	dev_priv->lvds_vbt = 0;
+
+	lvds_options = find_section(bdb, BDB_LVDS_OPTIONS);
+	if (!lvds_options)
+		return;
+
+	dev_priv->lvds_dither = lvds_options->pixel_dither;
+	if (lvds_options->panel_type == 0xff)
+		return;
+
+	lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA);
+	if (!lvds_lfp_data)
+		return;
+
+
+	entry = &lvds_lfp_data->data[lvds_options->panel_type];
+	dvo_timing = &entry->dvo_timing;
+
+	panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode),
+				      GFP_KERNEL);
+	if (panel_fixed_mode == NULL) {
+		dev_err(dev_priv->dev->dev, "out of memory for fixed panel mode\n");
+		return;
+	}
+
+	dev_priv->lvds_vbt = 1;
+	fill_detail_timing_data(panel_fixed_mode, dvo_timing);
+
+	if (panel_fixed_mode->htotal > 0 && panel_fixed_mode->vtotal > 0) {
+		dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode;
+		drm_mode_debug_printmodeline(panel_fixed_mode);
+	} else {
+		dev_dbg(dev_priv->dev->dev, "ignoring invalid LVDS VBT\n");
+		dev_priv->lvds_vbt = 0;
+		kfree(panel_fixed_mode);
+	}
+	return;
+}
+
+/* Try to find sdvo panel data */
+static void parse_sdvo_panel_data(struct drm_psb_private *dev_priv,
+		      struct bdb_header *bdb)
+{
+	struct bdb_sdvo_lvds_options *sdvo_lvds_options;
+	struct lvds_dvo_timing *dvo_timing;
+	struct drm_display_mode *panel_fixed_mode;
+
+	dev_priv->sdvo_lvds_vbt_mode = NULL;
+
+	sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS);
+	if (!sdvo_lvds_options)
+		return;
+
+	dvo_timing = find_section(bdb, BDB_SDVO_PANEL_DTDS);
+	if (!dvo_timing)
+		return;
+
+	panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
+
+	if (!panel_fixed_mode)
+		return;
+
+	fill_detail_timing_data(panel_fixed_mode,
+			dvo_timing + sdvo_lvds_options->panel_type);
+
+	dev_priv->sdvo_lvds_vbt_mode = panel_fixed_mode;
+
+	return;
+}
+
+static void parse_general_features(struct drm_psb_private *dev_priv,
+		       struct bdb_header *bdb)
+{
+	struct bdb_general_features *general;
+
+	/* Set sensible defaults in case we can't find the general block */
+	dev_priv->int_tv_support = 1;
+	dev_priv->int_crt_support = 1;
+
+	general = find_section(bdb, BDB_GENERAL_FEATURES);
+	if (general) {
+		dev_priv->int_tv_support = general->int_tv_support;
+		dev_priv->int_crt_support = general->int_crt_support;
+		dev_priv->lvds_use_ssc = general->enable_ssc;
+
+		if (dev_priv->lvds_use_ssc) {
+			dev_priv->lvds_ssc_freq
+				= general->ssc_freq ? 100 : 96;
+		}
+	}
+}
+
+/**
+ * psb_intel_init_bios - initialize VBIOS settings & find VBT
+ * @dev: DRM device
+ *
+ * Loads the Video BIOS and checks that the VBT exists.  Sets scratch registers
+ * to appropriate values.
+ *
+ * VBT existence is a sanity check that is relied on by other i830_bios.c code.
+ * Note that it would be better to use a BIOS call to get the VBT, as BIOSes may
+ * feed an updated VBT back through that, compared to what we'll fetch using
+ * this method of groping around in the BIOS data.
+ *
+ * Returns 0 on success, nonzero on failure.
+ */
+bool psb_intel_init_bios(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct pci_dev *pdev = dev->pdev;
+	struct vbt_header *vbt = NULL;
+	struct bdb_header *bdb;
+	u8 __iomem *bios;
+	size_t size;
+	int i;
+
+	bios = pci_map_rom(pdev, &size);
+	if (!bios)
+		return -1;
+
+	/* Scour memory looking for the VBT signature */
+	for (i = 0; i + 4 < size; i++) {
+		if (!memcmp(bios + i, "$VBT", 4)) {
+			vbt = (struct vbt_header *)(bios + i);
+			break;
+		}
+	}
+
+	if (!vbt) {
+		dev_err(dev->dev, "VBT signature missing\n");
+		pci_unmap_rom(pdev, bios);
+		return -1;
+	}
+
+	bdb = (struct bdb_header *)(bios + i + vbt->bdb_offset);
+
+	/* Grab useful general definitions */
+	parse_general_features(dev_priv, bdb);
+	parse_lfp_panel_data(dev_priv, bdb);
+	parse_sdvo_panel_data(dev_priv, bdb);
+	parse_backlight_data(dev_priv, bdb);
+
+	pci_unmap_rom(pdev, bios);
+
+	return 0;
+}
+
+/**
+ * Destroy and free VBT data
+ */
+void psb_intel_destroy_bios(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct drm_display_mode *sdvo_lvds_vbt_mode =
+				dev_priv->sdvo_lvds_vbt_mode;
+	struct drm_display_mode *lfp_lvds_vbt_mode =
+				dev_priv->lfp_lvds_vbt_mode;
+	struct bdb_lvds_backlight *lvds_bl =
+				dev_priv->lvds_bl;
+
+	/*free sdvo panel mode*/
+	if (sdvo_lvds_vbt_mode) {
+		dev_priv->sdvo_lvds_vbt_mode = NULL;
+		kfree(sdvo_lvds_vbt_mode);
+	}
+
+	if (lfp_lvds_vbt_mode) {
+		dev_priv->lfp_lvds_vbt_mode = NULL;
+		kfree(lfp_lvds_vbt_mode);
+	}
+
+	if (lvds_bl) {
+		dev_priv->lvds_bl = NULL;
+		kfree(lvds_bl);
+	}
+}
diff --git a/drivers/gpu/drm/gma500/intel_bios.h b/drivers/gpu/drm/gma500/intel_bios.h
new file mode 100644
index 0000000..70f1bf0
--- /dev/null
+++ b/drivers/gpu/drm/gma500/intel_bios.h
@@ -0,0 +1,430 @@
+/*
+ * Copyright (c) 2006 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+
+#ifndef _I830_BIOS_H_
+#define _I830_BIOS_H_
+
+#include <drm/drmP.h>
+
+struct vbt_header {
+	u8 signature[20];		/**< Always starts with 'VBT$' */
+	u16 version;			/**< decimal */
+	u16 header_size;		/**< in bytes */
+	u16 vbt_size;			/**< in bytes */
+	u8 vbt_checksum;
+	u8 reserved0;
+	u32 bdb_offset;			/**< from beginning of VBT */
+	u32 aim_offset[4];		/**< from beginning of VBT */
+} __attribute__((packed));
+
+
+struct bdb_header {
+	u8 signature[16];		/**< Always 'BIOS_DATA_BLOCK' */
+	u16 version;			/**< decimal */
+	u16 header_size;		/**< in bytes */
+	u16 bdb_size;			/**< in bytes */
+};
+
+/* strictly speaking, this is a "skip" block, but it has interesting info */
+struct vbios_data {
+	u8 type; /* 0 == desktop, 1 == mobile */
+	u8 relstage;
+	u8 chipset;
+	u8 lvds_present:1;
+	u8 tv_present:1;
+	u8 rsvd2:6; /* finish byte */
+	u8 rsvd3[4];
+	u8 signon[155];
+	u8 copyright[61];
+	u16 code_segment;
+	u8 dos_boot_mode;
+	u8 bandwidth_percent;
+	u8 rsvd4; /* popup memory size */
+	u8 resize_pci_bios;
+	u8 rsvd5; /* is crt already on ddc2 */
+} __attribute__((packed));
+
+/*
+ * There are several types of BIOS data blocks (BDBs), each block has
+ * an ID and size in the first 3 bytes (ID in first, size in next 2).
+ * Known types are listed below.
+ */
+#define BDB_GENERAL_FEATURES	  1
+#define BDB_GENERAL_DEFINITIONS	  2
+#define BDB_OLD_TOGGLE_LIST	  3
+#define BDB_MODE_SUPPORT_LIST	  4
+#define BDB_GENERIC_MODE_TABLE	  5
+#define BDB_EXT_MMIO_REGS	  6
+#define BDB_SWF_IO		  7
+#define BDB_SWF_MMIO		  8
+#define BDB_DOT_CLOCK_TABLE	  9
+#define BDB_MODE_REMOVAL_TABLE	 10
+#define BDB_CHILD_DEVICE_TABLE	 11
+#define BDB_DRIVER_FEATURES	 12
+#define BDB_DRIVER_PERSISTENCE	 13
+#define BDB_EXT_TABLE_PTRS	 14
+#define BDB_DOT_CLOCK_OVERRIDE	 15
+#define BDB_DISPLAY_SELECT	 16
+/* 17 rsvd */
+#define BDB_DRIVER_ROTATION	 18
+#define BDB_DISPLAY_REMOVE	 19
+#define BDB_OEM_CUSTOM		 20
+#define BDB_EFP_LIST		 21 /* workarounds for VGA hsync/vsync */
+#define BDB_SDVO_LVDS_OPTIONS	 22
+#define BDB_SDVO_PANEL_DTDS	 23
+#define BDB_SDVO_LVDS_PNP_IDS	 24
+#define BDB_SDVO_LVDS_POWER_SEQ	 25
+#define BDB_TV_OPTIONS		 26
+#define BDB_LVDS_OPTIONS	 40
+#define BDB_LVDS_LFP_DATA_PTRS	 41
+#define BDB_LVDS_LFP_DATA	 42
+#define BDB_LVDS_BACKLIGHT	 43
+#define BDB_LVDS_POWER		 44
+#define BDB_SKIP		254 /* VBIOS private block, ignore */
+
+struct bdb_general_features {
+	/* bits 1 */
+	u8 panel_fitting:2;
+	u8 flexaim:1;
+	u8 msg_enable:1;
+	u8 clear_screen:3;
+	u8 color_flip:1;
+
+	/* bits 2 */
+	u8 download_ext_vbt:1;
+	u8 enable_ssc:1;
+	u8 ssc_freq:1;
+	u8 enable_lfp_on_override:1;
+	u8 disable_ssc_ddt:1;
+	u8 rsvd8:3; /* finish byte */
+
+	/* bits 3 */
+	u8 disable_smooth_vision:1;
+	u8 single_dvi:1;
+	u8 rsvd9:6; /* finish byte */
+
+	/* bits 4 */
+	u8 legacy_monitor_detect;
+
+	/* bits 5 */
+	u8 int_crt_support:1;
+	u8 int_tv_support:1;
+	u8 rsvd11:6; /* finish byte */
+} __attribute__((packed));
+
+struct bdb_general_definitions {
+	/* DDC GPIO */
+	u8 crt_ddc_gmbus_pin;
+
+	/* DPMS bits */
+	u8 dpms_acpi:1;
+	u8 skip_boot_crt_detect:1;
+	u8 dpms_aim:1;
+	u8 rsvd1:5; /* finish byte */
+
+	/* boot device bits */
+	u8 boot_display[2];
+	u8 child_dev_size;
+
+	/* device info */
+	u8 tv_or_lvds_info[33];
+	u8 dev1[33];
+	u8 dev2[33];
+	u8 dev3[33];
+	u8 dev4[33];
+	/* may be another device block here on some platforms */
+};
+
+struct bdb_lvds_options {
+	u8 panel_type;
+	u8 rsvd1;
+	/* LVDS capabilities, stored in a dword */
+	u8 pfit_mode:2;
+	u8 pfit_text_mode_enhanced:1;
+	u8 pfit_gfx_mode_enhanced:1;
+	u8 pfit_ratio_auto:1;
+	u8 pixel_dither:1;
+	u8 lvds_edid:1;
+	u8 rsvd2:1;
+	u8 rsvd4;
+} __attribute__((packed));
+
+struct bdb_lvds_backlight {
+	u8 type:2;
+	u8 pol:1;
+	u8 gpio:3;
+	u8 gmbus:2;
+	u16 freq;
+	u8 minbrightness;
+	u8 i2caddr;
+	u8 brightnesscmd;
+	/*FIXME: more...*/
+} __attribute__((packed));
+
+/* LFP pointer table contains entries to the struct below */
+struct bdb_lvds_lfp_data_ptr {
+	u16 fp_timing_offset; /* offsets are from start of bdb */
+	u8 fp_table_size;
+	u16 dvo_timing_offset;
+	u8 dvo_table_size;
+	u16 panel_pnp_id_offset;
+	u8 pnp_table_size;
+} __attribute__((packed));
+
+struct bdb_lvds_lfp_data_ptrs {
+	u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */
+	struct bdb_lvds_lfp_data_ptr ptr[16];
+} __attribute__((packed));
+
+/* LFP data has 3 blocks per entry */
+struct lvds_fp_timing {
+	u16 x_res;
+	u16 y_res;
+	u32 lvds_reg;
+	u32 lvds_reg_val;
+	u32 pp_on_reg;
+	u32 pp_on_reg_val;
+	u32 pp_off_reg;
+	u32 pp_off_reg_val;
+	u32 pp_cycle_reg;
+	u32 pp_cycle_reg_val;
+	u32 pfit_reg;
+	u32 pfit_reg_val;
+	u16 terminator;
+} __attribute__((packed));
+
+struct lvds_dvo_timing {
+	u16 clock;		/**< In 10khz */
+	u8 hactive_lo;
+	u8 hblank_lo;
+	u8 hblank_hi:4;
+	u8 hactive_hi:4;
+	u8 vactive_lo;
+	u8 vblank_lo;
+	u8 vblank_hi:4;
+	u8 vactive_hi:4;
+	u8 hsync_off_lo;
+	u8 hsync_pulse_width;
+	u8 vsync_pulse_width:4;
+	u8 vsync_off:4;
+	u8 rsvd0:6;
+	u8 hsync_off_hi:2;
+	u8 h_image;
+	u8 v_image;
+	u8 max_hv;
+	u8 h_border;
+	u8 v_border;
+	u8 rsvd1:3;
+	u8 digital:2;
+	u8 vsync_positive:1;
+	u8 hsync_positive:1;
+	u8 rsvd2:1;
+} __attribute__((packed));
+
+struct lvds_pnp_id {
+	u16 mfg_name;
+	u16 product_code;
+	u32 serial;
+	u8 mfg_week;
+	u8 mfg_year;
+} __attribute__((packed));
+
+struct bdb_lvds_lfp_data_entry {
+	struct lvds_fp_timing fp_timing;
+	struct lvds_dvo_timing dvo_timing;
+	struct lvds_pnp_id pnp_id;
+} __attribute__((packed));
+
+struct bdb_lvds_lfp_data {
+	struct bdb_lvds_lfp_data_entry data[16];
+} __attribute__((packed));
+
+struct aimdb_header {
+	char signature[16];
+	char oem_device[20];
+	u16 aimdb_version;
+	u16 aimdb_header_size;
+	u16 aimdb_size;
+} __attribute__((packed));
+
+struct aimdb_block {
+	u8 aimdb_id;
+	u16 aimdb_size;
+} __attribute__((packed));
+
+struct vch_panel_data {
+	u16 fp_timing_offset;
+	u8 fp_timing_size;
+	u16 dvo_timing_offset;
+	u8 dvo_timing_size;
+	u16 text_fitting_offset;
+	u8 text_fitting_size;
+	u16 graphics_fitting_offset;
+	u8 graphics_fitting_size;
+} __attribute__((packed));
+
+struct vch_bdb_22 {
+	struct aimdb_block aimdb_block;
+	struct vch_panel_data panels[16];
+} __attribute__((packed));
+
+struct bdb_sdvo_lvds_options {
+	u8 panel_backlight;
+	u8 h40_set_panel_type;
+	u8 panel_type;
+	u8 ssc_clk_freq;
+	u16 als_low_trip;
+	u16 als_high_trip;
+	u8 sclalarcoeff_tab_row_num;
+	u8 sclalarcoeff_tab_row_size;
+	u8 coefficient[8];
+	u8 panel_misc_bits_1;
+	u8 panel_misc_bits_2;
+	u8 panel_misc_bits_3;
+	u8 panel_misc_bits_4;
+} __attribute__((packed));
+
+
+extern bool psb_intel_init_bios(struct drm_device *dev);
+extern void psb_intel_destroy_bios(struct drm_device *dev);
+
+/*
+ * Driver<->VBIOS interaction occurs through scratch bits in
+ * GR18 & SWF*.
+ */
+
+/* GR18 bits are set on display switch and hotkey events */
+#define GR18_DRIVER_SWITCH_EN	(1<<7) /* 0: VBIOS control, 1: driver control */
+#define GR18_HOTKEY_MASK	0x78 /* See also SWF4 15:0 */
+#define   GR18_HK_NONE		(0x0<<3)
+#define   GR18_HK_LFP_STRETCH	(0x1<<3)
+#define   GR18_HK_TOGGLE_DISP	(0x2<<3)
+#define   GR18_HK_DISP_SWITCH	(0x4<<3) /* see SWF14 15:0 for what to enable */
+#define   GR18_HK_POPUP_DISABLED (0x6<<3)
+#define   GR18_HK_POPUP_ENABLED	(0x7<<3)
+#define   GR18_HK_PFIT		(0x8<<3)
+#define   GR18_HK_APM_CHANGE	(0xa<<3)
+#define   GR18_HK_MULTIPLE	(0xc<<3)
+#define GR18_USER_INT_EN	(1<<2)
+#define GR18_A0000_FLUSH_EN	(1<<1)
+#define GR18_SMM_EN		(1<<0)
+
+/* Set by driver, cleared by VBIOS */
+#define SWF00_YRES_SHIFT	16
+#define SWF00_XRES_SHIFT	0
+#define SWF00_RES_MASK		0xffff
+
+/* Set by VBIOS at boot time and driver at runtime */
+#define SWF01_TV2_FORMAT_SHIFT	8
+#define SWF01_TV1_FORMAT_SHIFT	0
+#define SWF01_TV_FORMAT_MASK	0xffff
+
+#define SWF10_VBIOS_BLC_I2C_EN	(1<<29)
+#define SWF10_GTT_OVERRIDE_EN	(1<<28)
+#define SWF10_LFP_DPMS_OVR	(1<<27) /* override DPMS on display switch */
+#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24)
+#define   SWF10_OLD_TOGGLE	0x0
+#define   SWF10_TOGGLE_LIST_1	0x1
+#define   SWF10_TOGGLE_LIST_2	0x2
+#define   SWF10_TOGGLE_LIST_3	0x3
+#define   SWF10_TOGGLE_LIST_4	0x4
+#define SWF10_PANNING_EN	(1<<23)
+#define SWF10_DRIVER_LOADED	(1<<22)
+#define SWF10_EXTENDED_DESKTOP	(1<<21)
+#define SWF10_EXCLUSIVE_MODE	(1<<20)
+#define SWF10_OVERLAY_EN	(1<<19)
+#define SWF10_PLANEB_HOLDOFF	(1<<18)
+#define SWF10_PLANEA_HOLDOFF	(1<<17)
+#define SWF10_VGA_HOLDOFF	(1<<16)
+#define SWF10_ACTIVE_DISP_MASK	0xffff
+#define   SWF10_PIPEB_LFP2	(1<<15)
+#define   SWF10_PIPEB_EFP2	(1<<14)
+#define   SWF10_PIPEB_TV2	(1<<13)
+#define   SWF10_PIPEB_CRT2	(1<<12)
+#define   SWF10_PIPEB_LFP	(1<<11)
+#define   SWF10_PIPEB_EFP	(1<<10)
+#define   SWF10_PIPEB_TV	(1<<9)
+#define   SWF10_PIPEB_CRT	(1<<8)
+#define   SWF10_PIPEA_LFP2	(1<<7)
+#define   SWF10_PIPEA_EFP2	(1<<6)
+#define   SWF10_PIPEA_TV2	(1<<5)
+#define   SWF10_PIPEA_CRT2	(1<<4)
+#define   SWF10_PIPEA_LFP	(1<<3)
+#define   SWF10_PIPEA_EFP	(1<<2)
+#define   SWF10_PIPEA_TV	(1<<1)
+#define   SWF10_PIPEA_CRT	(1<<0)
+
+#define SWF11_MEMORY_SIZE_SHIFT	16
+#define SWF11_SV_TEST_EN	(1<<15)
+#define SWF11_IS_AGP		(1<<14)
+#define SWF11_DISPLAY_HOLDOFF	(1<<13)
+#define SWF11_DPMS_REDUCED	(1<<12)
+#define SWF11_IS_VBE_MODE	(1<<11)
+#define SWF11_PIPEB_ACCESS	(1<<10) /* 0 here means pipe a */
+#define SWF11_DPMS_MASK		0x07
+#define   SWF11_DPMS_OFF	(1<<2)
+#define   SWF11_DPMS_SUSPEND	(1<<1)
+#define   SWF11_DPMS_STANDBY	(1<<0)
+#define   SWF11_DPMS_ON		0
+
+#define SWF14_GFX_PFIT_EN	(1<<31)
+#define SWF14_TEXT_PFIT_EN	(1<<30)
+#define SWF14_LID_STATUS_CLOSED	(1<<29) /* 0 here means open */
+#define SWF14_POPUP_EN		(1<<28)
+#define SWF14_DISPLAY_HOLDOFF	(1<<27)
+#define SWF14_DISP_DETECT_EN	(1<<26)
+#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */
+#define SWF14_DRIVER_STATUS	(1<<24)
+#define SWF14_OS_TYPE_WIN9X	(1<<23)
+#define SWF14_OS_TYPE_WINNT	(1<<22)
+/* 21:19 rsvd */
+#define SWF14_PM_TYPE_MASK	0x00070000
+#define   SWF14_PM_ACPI_VIDEO	(0x4 << 16)
+#define   SWF14_PM_ACPI		(0x3 << 16)
+#define   SWF14_PM_APM_12	(0x2 << 16)
+#define   SWF14_PM_APM_11	(0x1 << 16)
+#define SWF14_HK_REQUEST_MASK	0x0000ffff /* see GR18 6:3 for event type */
+	  /* if GR18 indicates a display switch */
+#define   SWF14_DS_PIPEB_LFP2_EN (1<<15)
+#define   SWF14_DS_PIPEB_EFP2_EN (1<<14)
+#define   SWF14_DS_PIPEB_TV2_EN  (1<<13)
+#define   SWF14_DS_PIPEB_CRT2_EN (1<<12)
+#define   SWF14_DS_PIPEB_LFP_EN  (1<<11)
+#define   SWF14_DS_PIPEB_EFP_EN  (1<<10)
+#define   SWF14_DS_PIPEB_TV_EN	 (1<<9)
+#define   SWF14_DS_PIPEB_CRT_EN  (1<<8)
+#define   SWF14_DS_PIPEA_LFP2_EN (1<<7)
+#define   SWF14_DS_PIPEA_EFP2_EN (1<<6)
+#define   SWF14_DS_PIPEA_TV2_EN  (1<<5)
+#define   SWF14_DS_PIPEA_CRT2_EN (1<<4)
+#define   SWF14_DS_PIPEA_LFP_EN  (1<<3)
+#define   SWF14_DS_PIPEA_EFP_EN  (1<<2)
+#define   SWF14_DS_PIPEA_TV_EN	 (1<<1)
+#define   SWF14_DS_PIPEA_CRT_EN  (1<<0)
+	  /* if GR18 indicates a panel fitting request */
+#define   SWF14_PFIT_EN		(1<<0) /* 0 means disable */
+	  /* if GR18 indicates an APM change request */
+#define   SWF14_APM_HIBERNATE	0x4
+#define   SWF14_APM_SUSPEND	0x3
+#define   SWF14_APM_STANDBY	0x1
+#define   SWF14_APM_RESTORE	0x0
+
+#endif /* _I830_BIOS_H_ */
diff --git a/drivers/gpu/drm/gma500/intel_opregion.c b/drivers/gpu/drm/gma500/intel_opregion.c
new file mode 100644
index 0000000..d2e6037
--- /dev/null
+++ b/drivers/gpu/drm/gma500/intel_opregion.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2010 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#include "psb_drv.h"
+
+struct opregion_header {
+	u8 signature[16];
+	u32 size;
+	u32 opregion_ver;
+	u8 bios_ver[32];
+	u8 vbios_ver[16];
+	u8 driver_ver[16];
+	u32 mboxes;
+	u8 reserved[164];
+} __packed;
+
+struct opregion_apci {
+	/*FIXME: add it later*/
+} __packed;
+
+struct opregion_swsci {
+	/*FIXME: add it later*/
+} __packed;
+
+struct opregion_acpi {
+	/*FIXME: add it later*/
+} __packed;
+
+int gma_intel_opregion_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 opregion_phy;
+	void *base;
+	u32 *lid_state;
+
+	dev_priv->lid_state = NULL;
+
+	pci_read_config_dword(dev->pdev, 0xfc, &opregion_phy);
+	if (opregion_phy == 0)
+		return -ENOTSUPP;
+
+	base = ioremap(opregion_phy, 8*1024);
+	if (!base)
+		return -ENOMEM;
+
+	lid_state = base + 0x01ac;
+
+	dev_priv->lid_state = lid_state;
+	dev_priv->lid_last_state = readl(lid_state);
+	return 0;
+}
+
+int gma_intel_opregion_exit(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	if (dev_priv->lid_state)
+		iounmap(dev_priv->lid_state);
+	return 0;
+}
diff --git a/drivers/gpu/drm/gma500/mid_bios.c b/drivers/gpu/drm/gma500/mid_bios.c
new file mode 100644
index 0000000..7115d1a
--- /dev/null
+++ b/drivers/gpu/drm/gma500/mid_bios.c
@@ -0,0 +1,243 @@
+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+/* TODO
+ * - Split functions by vbt type
+ * - Make them all take drm_device
+ * - Check ioremap failures
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "psb_drm.h"
+#include "psb_drv.h"
+#include "mid_bios.h"
+
+static void mid_get_fuse_settings(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+	uint32_t fuse_value = 0;
+	uint32_t fuse_value_tmp = 0;
+
+#define FB_REG06 0xD0810600
+#define FB_MIPI_DISABLE  (1 << 11)
+#define FB_REG09 0xD0810900
+#define FB_REG09 0xD0810900
+#define FB_SKU_MASK  0x7000
+#define FB_SKU_SHIFT 12
+#define FB_SKU_100 0
+#define FB_SKU_100L 1
+#define FB_SKU_83 2
+	pci_write_config_dword(pci_root, 0xD0, FB_REG06);
+	pci_read_config_dword(pci_root, 0xD4, &fuse_value);
+
+	/* FB_MIPI_DISABLE doesn't mean LVDS on with Medfield */
+	if (IS_MRST(dev))
+		dev_priv->iLVDS_enable = fuse_value & FB_MIPI_DISABLE;
+
+	DRM_INFO("internal display is %s\n",
+		 dev_priv->iLVDS_enable ? "LVDS display" : "MIPI display");
+
+	 /* Prevent runtime suspend at start*/
+	 if (dev_priv->iLVDS_enable) {
+		dev_priv->is_lvds_on = true;
+		dev_priv->is_mipi_on = false;
+	} else {
+		dev_priv->is_mipi_on = true;
+		dev_priv->is_lvds_on = false;
+	}
+
+	dev_priv->video_device_fuse = fuse_value;
+
+	pci_write_config_dword(pci_root, 0xD0, FB_REG09);
+	pci_read_config_dword(pci_root, 0xD4, &fuse_value);
+
+	dev_dbg(dev->dev, "SKU values is 0x%x.\n", fuse_value);
+	fuse_value_tmp = (fuse_value & FB_SKU_MASK) >> FB_SKU_SHIFT;
+
+	dev_priv->fuse_reg_value = fuse_value;
+
+	switch (fuse_value_tmp) {
+	case FB_SKU_100:
+		dev_priv->core_freq = 200;
+		break;
+	case FB_SKU_100L:
+		dev_priv->core_freq = 100;
+		break;
+	case FB_SKU_83:
+		dev_priv->core_freq = 166;
+		break;
+	default:
+		dev_warn(dev->dev, "Invalid SKU values, SKU value = 0x%08x\n",
+								fuse_value_tmp);
+		dev_priv->core_freq = 0;
+	}
+	dev_dbg(dev->dev, "LNC core clk is %dMHz.\n", dev_priv->core_freq);
+	pci_dev_put(pci_root);
+}
+
+/*
+ *	Get the revison ID, B0:D2:F0;0x08
+ */
+static void mid_get_pci_revID(struct drm_psb_private *dev_priv)
+{
+	uint32_t platform_rev_id = 0;
+	struct pci_dev *pci_gfx_root = pci_get_bus_and_slot(0, PCI_DEVFN(2, 0));
+
+	pci_read_config_dword(pci_gfx_root, 0x08, &platform_rev_id);
+	dev_priv->platform_rev_id = (uint8_t) platform_rev_id;
+	pci_dev_put(pci_gfx_root);
+	dev_dbg(dev_priv->dev->dev, "platform_rev_id is %x\n",
+					dev_priv->platform_rev_id);
+}
+
+static void mid_get_vbt_data(struct drm_psb_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct oaktrail_vbt *vbt = &dev_priv->vbt_data;
+	u32 addr;
+	u16 new_size;
+	u8 *vbt_virtual;
+	u8 bpi;
+	u8 number_desc = 0;
+	struct oaktrail_timing_info *dp_ti = &dev_priv->gct_data.DTD;
+	struct gct_r10_timing_info ti;
+	void *pGCT;
+	struct pci_dev *pci_gfx_root = pci_get_bus_and_slot(0, PCI_DEVFN(2, 0));
+
+	/* Get the address of the platform config vbt, B0:D2:F0;0xFC */
+	pci_read_config_dword(pci_gfx_root, 0xFC, &addr);
+	pci_dev_put(pci_gfx_root);
+
+	dev_dbg(dev->dev, "drm platform config address is %x\n", addr);
+
+	/* check for platform config address == 0. */
+	/* this means fw doesn't support vbt */
+
+	if (addr == 0) {
+		vbt->size = 0;
+		return;
+	}
+
+	/* get the virtual address of the vbt */
+	vbt_virtual = ioremap(addr, sizeof(*vbt));
+
+	memcpy(vbt, vbt_virtual, sizeof(*vbt));
+	iounmap(vbt_virtual); /* Free virtual address space */
+
+	dev_dbg(dev->dev, "GCT revision is %x\n", vbt->revision);
+
+	switch (vbt->revision) {
+	case 0:
+		vbt->oaktrail_gct = ioremap(addr + sizeof(*vbt) - 4,
+					vbt->size - sizeof(*vbt) + 4);
+		pGCT = vbt->oaktrail_gct;
+		bpi = ((struct oaktrail_gct_v1 *)pGCT)->PD.BootPanelIndex;
+		dev_priv->gct_data.bpi = bpi;
+		dev_priv->gct_data.pt =
+			((struct oaktrail_gct_v1 *)pGCT)->PD.PanelType;
+		memcpy(&dev_priv->gct_data.DTD,
+			&((struct oaktrail_gct_v1 *)pGCT)->panel[bpi].DTD,
+				sizeof(struct oaktrail_timing_info));
+		dev_priv->gct_data.Panel_Port_Control =
+		  ((struct oaktrail_gct_v1 *)pGCT)->panel[bpi].Panel_Port_Control;
+		dev_priv->gct_data.Panel_MIPI_Display_Descriptor =
+			((struct oaktrail_gct_v1 *)pGCT)->panel[bpi].Panel_MIPI_Display_Descriptor;
+		break;
+	case 1:
+		vbt->oaktrail_gct = ioremap(addr + sizeof(*vbt) - 4,
+					vbt->size - sizeof(*vbt) + 4);
+		pGCT = vbt->oaktrail_gct;
+		bpi = ((struct oaktrail_gct_v2 *)pGCT)->PD.BootPanelIndex;
+		dev_priv->gct_data.bpi = bpi;
+		dev_priv->gct_data.pt =
+			((struct oaktrail_gct_v2 *)pGCT)->PD.PanelType;
+		memcpy(&dev_priv->gct_data.DTD,
+			&((struct oaktrail_gct_v2 *)pGCT)->panel[bpi].DTD,
+				sizeof(struct oaktrail_timing_info));
+		dev_priv->gct_data.Panel_Port_Control =
+		  ((struct oaktrail_gct_v2 *)pGCT)->panel[bpi].Panel_Port_Control;
+		dev_priv->gct_data.Panel_MIPI_Display_Descriptor =
+			((struct oaktrail_gct_v2 *)pGCT)->panel[bpi].Panel_MIPI_Display_Descriptor;
+		break;
+	case 0x10:
+		/*header definition changed from rev 01 (v2) to rev 10h. */
+		/*so, some values have changed location*/
+		new_size = vbt->checksum; /*checksum contains lo size byte*/
+		/*LSB of oaktrail_gct contains hi size byte*/
+		new_size |= ((0xff & (unsigned int)vbt->oaktrail_gct)) << 8;
+
+		vbt->checksum = vbt->size; /*size contains the checksum*/
+		if (new_size > 0xff)
+			vbt->size = 0xff; /*restrict size to 255*/
+		else
+			vbt->size = new_size;
+
+		/* number of descriptors defined in the GCT */
+		number_desc = ((0xff00 & (unsigned int)vbt->oaktrail_gct)) >> 8;
+		bpi = ((0xff0000 & (unsigned int)vbt->oaktrail_gct)) >> 16;
+		vbt->oaktrail_gct = ioremap(addr + GCT_R10_HEADER_SIZE,
+				GCT_R10_DISPLAY_DESC_SIZE * number_desc);
+		pGCT = vbt->oaktrail_gct;
+		pGCT = (u8 *)pGCT + (bpi*GCT_R10_DISPLAY_DESC_SIZE);
+		dev_priv->gct_data.bpi = bpi; /*save boot panel id*/
+
+		/*copy the GCT display timings into a temp structure*/
+		memcpy(&ti, pGCT, sizeof(struct gct_r10_timing_info));
+
+		/*now copy the temp struct into the dev_priv->gct_data*/
+		dp_ti->pixel_clock = ti.pixel_clock;
+		dp_ti->hactive_hi = ti.hactive_hi;
+		dp_ti->hactive_lo = ti.hactive_lo;
+		dp_ti->hblank_hi = ti.hblank_hi;
+		dp_ti->hblank_lo = ti.hblank_lo;
+		dp_ti->hsync_offset_hi = ti.hsync_offset_hi;
+		dp_ti->hsync_offset_lo = ti.hsync_offset_lo;
+		dp_ti->hsync_pulse_width_hi = ti.hsync_pulse_width_hi;
+		dp_ti->hsync_pulse_width_lo = ti.hsync_pulse_width_lo;
+		dp_ti->vactive_hi = ti.vactive_hi;
+		dp_ti->vactive_lo = ti.vactive_lo;
+		dp_ti->vblank_hi = ti.vblank_hi;
+		dp_ti->vblank_lo = ti.vblank_lo;
+		dp_ti->vsync_offset_hi = ti.vsync_offset_hi;
+		dp_ti->vsync_offset_lo = ti.vsync_offset_lo;
+		dp_ti->vsync_pulse_width_hi = ti.vsync_pulse_width_hi;
+		dp_ti->vsync_pulse_width_lo = ti.vsync_pulse_width_lo;
+
+		/* Move the MIPI_Display_Descriptor data from GCT to dev priv */
+		dev_priv->gct_data.Panel_MIPI_Display_Descriptor =
+							*((u8 *)pGCT + 0x0d);
+		dev_priv->gct_data.Panel_MIPI_Display_Descriptor |=
+						(*((u8 *)pGCT + 0x0e)) << 8;
+		break;
+	default:
+		dev_err(dev->dev, "Unknown revision of GCT!\n");
+		vbt->size = 0;
+	}
+}
+
+int mid_chip_setup(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	mid_get_fuse_settings(dev);
+	mid_get_vbt_data(dev_priv);
+	mid_get_pci_revID(dev_priv);
+	return 0;
+}
diff --git a/drivers/gpu/drm/gma500/mid_bios.h b/drivers/gpu/drm/gma500/mid_bios.h
new file mode 100644
index 0000000..00e7d56
--- /dev/null
+++ b/drivers/gpu/drm/gma500/mid_bios.h
@@ -0,0 +1,21 @@
+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+extern int mid_chip_setup(struct drm_device *dev);
+

[PATCH 07/12] gma500: Add the i2c bus support

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

Again this might be a candidate for sharing later.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/intel_i2c.c |  169 ++++++++++++++++++++++++++++++++++++
 1 files changed, 169 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpu/drm/gma500/intel_i2c.c


diff --git a/drivers/gpu/drm/gma500/intel_i2c.c b/drivers/gpu/drm/gma500/intel_i2c.c
new file mode 100644
index 0000000..e33432d
--- /dev/null
+++ b/drivers/gpu/drm/gma500/intel_i2c.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+#include "psb_drv.h"
+#include "psb_intel_reg.h"
+
+/*
+ * Intel GPIO access functions
+ */
+
+#define I2C_RISEFALL_TIME 20
+
+static int get_clock(void *data)
+{
+	struct psb_intel_i2c_chan *chan = data;
+	struct drm_device *dev = chan->drm_dev;
+	u32 val;
+
+	val = REG_READ(chan->reg);
+	return (val & GPIO_CLOCK_VAL_IN) != 0;
+}
+
+static int get_data(void *data)
+{
+	struct psb_intel_i2c_chan *chan = data;
+	struct drm_device *dev = chan->drm_dev;
+	u32 val;
+
+	val = REG_READ(chan->reg);
+	return (val & GPIO_DATA_VAL_IN) != 0;
+}
+
+static void set_clock(void *data, int state_high)
+{
+	struct psb_intel_i2c_chan *chan = data;
+	struct drm_device *dev = chan->drm_dev;
+	u32 reserved = 0, clock_bits;
+
+	/* On most chips, these bits must be preserved in software. */
+	reserved =
+		    REG_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE |
+					   GPIO_CLOCK_PULLUP_DISABLE);
+
+	if (state_high)
+		clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK;
+	else
+		clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK |
+		    GPIO_CLOCK_VAL_MASK;
+	REG_WRITE(chan->reg, reserved | clock_bits);
+	udelay(I2C_RISEFALL_TIME);	/* wait for the line to change state */
+}
+
+static void set_data(void *data, int state_high)
+{
+	struct psb_intel_i2c_chan *chan = data;
+	struct drm_device *dev = chan->drm_dev;
+	u32 reserved = 0, data_bits;
+
+	/* On most chips, these bits must be preserved in software. */
+	reserved =
+		    REG_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE |
+					   GPIO_CLOCK_PULLUP_DISABLE);
+
+	if (state_high)
+		data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK;
+	else
+		data_bits =
+		    GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK |
+		    GPIO_DATA_VAL_MASK;
+
+	REG_WRITE(chan->reg, reserved | data_bits);
+	udelay(I2C_RISEFALL_TIME);	/* wait for the line to change state */
+}
+
+/**
+ * psb_intel_i2c_create - instantiate an Intel i2c bus using the specified GPIO reg
+ * @dev: DRM device
+ * @output: driver specific output device
+ * @reg: GPIO reg to use
+ * @name: name for this bus
+ *
+ * Creates and registers a new i2c bus with the Linux i2c layer, for use
+ * in output probing and control (e.g. DDC or SDVO control functions).
+ *
+ * Possible values for @reg include:
+ *   %GPIOA
+ *   %GPIOB
+ *   %GPIOC
+ *   %GPIOD
+ *   %GPIOE
+ *   %GPIOF
+ *   %GPIOG
+ *   %GPIOH
+ * see PRM for details on how these different busses are used.
+ */
+struct psb_intel_i2c_chan *psb_intel_i2c_create(struct drm_device *dev,
+					const u32 reg, const char *name)
+{
+	struct psb_intel_i2c_chan *chan;
+
+	chan = kzalloc(sizeof(struct psb_intel_i2c_chan), GFP_KERNEL);
+	if (!chan)
+		goto out_free;
+
+	chan->drm_dev = dev;
+	chan->reg = reg;
+	snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name);
+	chan->adapter.owner = THIS_MODULE;
+	chan->adapter.algo_data = &chan->algo;
+	chan->adapter.dev.parent = &dev->pdev->dev;
+	chan->algo.setsda = set_data;
+	chan->algo.setscl = set_clock;
+	chan->algo.getsda = get_data;
+	chan->algo.getscl = get_clock;
+	chan->algo.udelay = 20;
+	chan->algo.timeout = usecs_to_jiffies(2200);
+	chan->algo.data = chan;
+
+	i2c_set_adapdata(&chan->adapter, chan);
+
+	if (i2c_bit_add_bus(&chan->adapter))
+		goto out_free;
+
+	/* JJJ:  raise SCL and SDA? */
+	set_data(chan, 1);
+	set_clock(chan, 1);
+	udelay(20);
+
+	return chan;
+
+out_free:
+	kfree(chan);
+	return NULL;
+}
+
+/**
+ * psb_intel_i2c_destroy - unregister and free i2c bus resources
+ * @output: channel to free
+ *
+ * Unregister the adapter from the i2c layer, then free the structure.
+ */
+void psb_intel_i2c_destroy(struct psb_intel_i2c_chan *chan)
+{
+	if (!chan)
+		return;
+
+	i2c_del_adapter(&chan->adapter);
+	kfree(chan);
+}

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 08/12] gma500: Add the core DRM files and headers

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

Not really a nice way to split this up further for submission. This
provides all the DRM interfacing logic, the headers and relevant glue.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/psb_drm.h |  207 +++++++
 drivers/gpu/drm/gma500/psb_drv.c | 1210 ++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/gma500/psb_drv.h |  924 +++++++++++++++++++++++++++++
 drivers/gpu/drm/gma500/psb_irq.c |  553 +++++++++++++++++
 drivers/gpu/drm/gma500/psb_irq.h |   45 +
 drivers/gpu/drm/gma500/psb_reg.h |  582 ++++++++++++++++++
 6 files changed, 3521 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpu/drm/gma500/psb_drm.h
 create mode 100644 drivers/gpu/drm/gma500/psb_drv.c
 create mode 100644 drivers/gpu/drm/gma500/psb_drv.h
 create mode 100644 drivers/gpu/drm/gma500/psb_irq.c
 create mode 100644 drivers/gpu/drm/gma500/psb_irq.h
 create mode 100644 drivers/gpu/drm/gma500/psb_reg.h


diff --git a/drivers/gpu/drm/gma500/psb_drm.h b/drivers/gpu/drm/gma500/psb_drm.h
new file mode 100644
index 0000000..dca7b20
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_drm.h
@@ -0,0 +1,207 @@
+/**************************************************************************
+ * Copyright (c) 2007-2011, Intel Corporation.
+ * All Rights Reserved.
+ * Copyright (c) 2008, Tungsten Graphics Inc.  Cedar Park, TX., USA.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#ifndef _PSB_DRM_H_
+#define _PSB_DRM_H_
+
+#define PSB_NUM_PIPE 3
+
+#define PSB_GPU_ACCESS_READ         (1ULL << 32)
+#define PSB_GPU_ACCESS_WRITE        (1ULL << 33)
+#define PSB_GPU_ACCESS_MASK         (PSB_GPU_ACCESS_READ | PSB_GPU_ACCESS_WRITE)
+
+#define PSB_BO_FLAG_COMMAND         (1ULL << 52)
+
+/*
+ * Feedback components:
+ */
+
+struct drm_psb_sizes_arg {
+	u32 ta_mem_size;
+	u32 mmu_size;
+	u32 pds_size;
+	u32 rastgeom_size;
+	u32 tt_size;
+	u32 vram_size;
+};
+
+struct drm_psb_dpst_lut_arg {
+	uint8_t lut[256];
+	int output_id;
+};
+
+#define PSB_DC_CRTC_SAVE 0x01
+#define PSB_DC_CRTC_RESTORE 0x02
+#define PSB_DC_OUTPUT_SAVE 0x04
+#define PSB_DC_OUTPUT_RESTORE 0x08
+#define PSB_DC_CRTC_MASK 0x03
+#define PSB_DC_OUTPUT_MASK 0x0C
+
+struct drm_psb_dc_state_arg {
+	u32 flags;
+	u32 obj_id;
+};
+
+struct drm_psb_mode_operation_arg {
+	u32 obj_id;
+	u16 operation;
+	struct drm_mode_modeinfo mode;
+	void *data;
+};
+
+struct drm_psb_stolen_memory_arg {
+	u32 base;
+	u32 size;
+};
+
+/*Display Register Bits*/
+#define REGRWBITS_PFIT_CONTROLS			(1 << 0)
+#define REGRWBITS_PFIT_AUTOSCALE_RATIOS		(1 << 1)
+#define REGRWBITS_PFIT_PROGRAMMED_SCALE_RATIOS	(1 << 2)
+#define REGRWBITS_PIPEASRC			(1 << 3)
+#define REGRWBITS_PIPEBSRC			(1 << 4)
+#define REGRWBITS_VTOTAL_A			(1 << 5)
+#define REGRWBITS_VTOTAL_B			(1 << 6)
+#define REGRWBITS_DSPACNTR	(1 << 8)
+#define REGRWBITS_DSPBCNTR	(1 << 9)
+#define REGRWBITS_DSPCCNTR	(1 << 10)
+
+/*Overlay Register Bits*/
+#define OV_REGRWBITS_OVADD			(1 << 0)
+#define OV_REGRWBITS_OGAM_ALL			(1 << 1)
+
+#define OVC_REGRWBITS_OVADD                  (1 << 2)
+#define OVC_REGRWBITS_OGAM_ALL			(1 << 3)
+
+struct drm_psb_register_rw_arg {
+	u32 b_force_hw_on;
+
+	u32 display_read_mask;
+	u32 display_write_mask;
+
+	struct {
+		u32 pfit_controls;
+		u32 pfit_autoscale_ratios;
+		u32 pfit_programmed_scale_ratios;
+		u32 pipeasrc;
+		u32 pipebsrc;
+		u32 vtotal_a;
+		u32 vtotal_b;
+	} display;
+
+	u32 overlay_read_mask;
+	u32 overlay_write_mask;
+
+	struct {
+		u32 OVADD;
+		u32 OGAMC0;
+		u32 OGAMC1;
+		u32 OGAMC2;
+		u32 OGAMC3;
+		u32 OGAMC4;
+		u32 OGAMC5;
+		u32 IEP_ENABLED;
+		u32 IEP_BLE_MINMAX;
+		u32 IEP_BSSCC_CONTROL;
+		u32 b_wait_vblank;
+	} overlay;
+
+	u32 sprite_enable_mask;
+	u32 sprite_disable_mask;
+
+	struct {
+		u32 dspa_control;
+		u32 dspa_key_value;
+		u32 dspa_key_mask;
+		u32 dspc_control;
+		u32 dspc_stride;
+		u32 dspc_position;
+		u32 dspc_linear_offset;
+		u32 dspc_size;
+		u32 dspc_surface;
+	} sprite;
+
+	u32 subpicture_enable_mask;
+	u32 subpicture_disable_mask;
+};
+
+/* Controlling the kernel modesetting buffers */
+
+#define DRM_PSB_SIZES           0x07
+#define DRM_PSB_FUSE_REG	0x08
+#define DRM_PSB_DC_STATE	0x0A
+#define DRM_PSB_ADB		0x0B
+#define DRM_PSB_MODE_OPERATION	0x0C
+#define DRM_PSB_STOLEN_MEMORY	0x0D
+#define DRM_PSB_REGISTER_RW	0x0E
+
+/*
+ * NOTE: Add new commands here, but increment
+ * the values below and increment their
+ * corresponding defines where they're
+ * defined elsewhere.
+ */
+
+#define DRM_PSB_GEM_CREATE	0x10
+#define DRM_PSB_2D_OP		0x11		/* Will be merged later */
+#define DRM_PSB_GEM_MMAP	0x12
+#define DRM_PSB_DPST		0x1B
+#define DRM_PSB_GAMMA		0x1C
+#define DRM_PSB_DPST_BL		0x1D
+#define DRM_PSB_GET_PIPE_FROM_CRTC_ID 0x1F
+
+#define PSB_MODE_OPERATION_MODE_VALID	0x01
+#define PSB_MODE_OPERATION_SET_DC_BASE  0x02
+
+struct drm_psb_get_pipe_from_crtc_id_arg {
+	/** ID of CRTC being requested **/
+	u32 crtc_id;
+
+	/** pipe of requested CRTC **/
+	u32 pipe;
+};
+
+/* FIXME: move this into a medfield header once we are sure it isn't needed for an
+   ioctl  */
+struct psb_drm_dpu_rect {  
+	int x, y;             
+	int width, height;    
+};  
+
+struct drm_psb_gem_create {
+	__u64 size;
+	__u32 handle;
+	__u32 flags;
+#define PSB_GEM_CREATE_STOLEN		1	/* Stolen memory can be used */
+};
+
+struct drm_psb_gem_mmap {
+	__u32 handle;
+	__u32 pad;
+	/**
+	 * Fake offset to use for subsequent mmap call
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 offset;
+};
+
+#endif
diff --git a/drivers/gpu/drm/gma500/psb_drv.c b/drivers/gpu/drm/gma500/psb_drv.c
new file mode 100644
index 0000000..b317a8b
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_drv.c
@@ -0,0 +1,1210 @@
+/**************************************************************************
+ * Copyright (c) 2007-2011, Intel Corporation.
+ * All Rights Reserved.
+ * Copyright (c) 2008, Tungsten Graphics, Inc. Cedar Park, TX., USA.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "psb_drm.h"
+#include "psb_drv.h"
+#include "framebuffer.h"
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+#include "intel_bios.h"
+#include "mid_bios.h"
+#include <drm/drm_pciids.h>
+#include "power.h"
+#include <linux/cpu.h>
+#include <linux/notifier.h>
+#include <linux/spinlock.h>
+#include <linux/pm_runtime.h>
+#include <acpi/video.h>
+
+static int drm_psb_trap_pagefaults;
+
+int drm_psb_no_fb;
+
+static int psb_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+
+MODULE_PARM_DESC(no_fb, "Disable FBdev");
+MODULE_PARM_DESC(trap_pagefaults, "Error and reset on MMU pagefaults");
+module_param_named(no_fb, drm_psb_no_fb, int, 0600);
+module_param_named(trap_pagefaults, drm_psb_trap_pagefaults, int, 0600);
+
+
+static DEFINE_PCI_DEVICE_TABLE(pciidlist) = {
+	{ 0x8086, 0x8108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &psb_chip_ops },
+	{ 0x8086, 0x8109, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &psb_chip_ops },
+#if defined(CONFIG_DRM_OAKTRAIL)
+	{ 0x8086, 0x4100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops},
+	{ 0x8086, 0x4101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops},
+	{ 0x8086, 0x4102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops},
+	{ 0x8086, 0x4103, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops},
+	{ 0x8086, 0x4104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops},
+	{ 0x8086, 0x4105, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops},
+	{ 0x8086, 0x4106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops},
+	{ 0x8086, 0x4107, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops},
+#endif
+#if defined(CONFIG_DRM_CDV)
+	{ 0x8086, 0x0be0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
+	{ 0x8086, 0x0be1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
+	{ 0x8086, 0x0be2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
+	{ 0x8086, 0x0be3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
+	{ 0x8086, 0x0be4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
+	{ 0x8086, 0x0be5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
+	{ 0x8086, 0x0be6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
+	{ 0x8086, 0x0be7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
+#endif
+	{ 0, 0, 0}
+};
+MODULE_DEVICE_TABLE(pci, pciidlist);
+
+/*
+ * Standard IOCTLs.
+ */
+
+#define DRM_IOCTL_PSB_SIZES	\
+		DRM_IOR(DRM_PSB_SIZES + DRM_COMMAND_BASE, \
+			struct drm_psb_sizes_arg)
+#define DRM_IOCTL_PSB_FUSE_REG	\
+		DRM_IOWR(DRM_PSB_FUSE_REG + DRM_COMMAND_BASE, uint32_t)
+#define DRM_IOCTL_PSB_DC_STATE	\
+		DRM_IOW(DRM_PSB_DC_STATE + DRM_COMMAND_BASE, \
+			struct drm_psb_dc_state_arg)
+#define DRM_IOCTL_PSB_ADB	\
+		DRM_IOWR(DRM_PSB_ADB + DRM_COMMAND_BASE, uint32_t)
+#define DRM_IOCTL_PSB_MODE_OPERATION	\
+		DRM_IOWR(DRM_PSB_MODE_OPERATION + DRM_COMMAND_BASE, \
+			 struct drm_psb_mode_operation_arg)
+#define DRM_IOCTL_PSB_STOLEN_MEMORY	\
+		DRM_IOWR(DRM_PSB_STOLEN_MEMORY + DRM_COMMAND_BASE, \
+			 struct drm_psb_stolen_memory_arg)
+#define DRM_IOCTL_PSB_REGISTER_RW	\
+		DRM_IOWR(DRM_PSB_REGISTER_RW + DRM_COMMAND_BASE, \
+			 struct drm_psb_register_rw_arg)
+#define DRM_IOCTL_PSB_DPST	\
+		DRM_IOWR(DRM_PSB_DPST + DRM_COMMAND_BASE, \
+			 uint32_t)
+#define DRM_IOCTL_PSB_GAMMA	\
+		DRM_IOWR(DRM_PSB_GAMMA + DRM_COMMAND_BASE, \
+			 struct drm_psb_dpst_lut_arg)
+#define DRM_IOCTL_PSB_DPST_BL	\
+		DRM_IOWR(DRM_PSB_DPST_BL + DRM_COMMAND_BASE, \
+			 uint32_t)
+#define DRM_IOCTL_PSB_GET_PIPE_FROM_CRTC_ID	\
+		DRM_IOWR(DRM_PSB_GET_PIPE_FROM_CRTC_ID + DRM_COMMAND_BASE, \
+			 struct drm_psb_get_pipe_from_crtc_id_arg)
+#define DRM_IOCTL_PSB_GEM_CREATE	\
+		DRM_IOWR(DRM_PSB_GEM_CREATE + DRM_COMMAND_BASE, \
+			 struct drm_psb_gem_create)
+#define DRM_IOCTL_PSB_GEM_MMAP	\
+		DRM_IOWR(DRM_PSB_GEM_MMAP + DRM_COMMAND_BASE, \
+			 struct drm_psb_gem_mmap)
+
+static int psb_sizes_ioctl(struct drm_device *dev, void *data,
+			   struct drm_file *file_priv);
+static int psb_dc_state_ioctl(struct drm_device *dev, void * data,
+			      struct drm_file *file_priv);
+static int psb_adb_ioctl(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv);
+static int psb_mode_operation_ioctl(struct drm_device *dev, void *data,
+				    struct drm_file *file_priv);
+static int psb_stolen_memory_ioctl(struct drm_device *dev, void *data,
+				   struct drm_file *file_priv);
+static int psb_register_rw_ioctl(struct drm_device *dev, void *data,
+				 struct drm_file *file_priv);
+static int psb_dpst_ioctl(struct drm_device *dev, void *data,
+			  struct drm_file *file_priv);
+static int psb_gamma_ioctl(struct drm_device *dev, void *data,
+			   struct drm_file *file_priv);
+static int psb_dpst_bl_ioctl(struct drm_device *dev, void *data,
+			     struct drm_file *file_priv);
+
+#define PSB_IOCTL_DEF(ioctl, func, flags) \
+	[DRM_IOCTL_NR(ioctl) - DRM_COMMAND_BASE] = {ioctl, flags, func}
+
+static struct drm_ioctl_desc psb_ioctls[] = {
+	PSB_IOCTL_DEF(DRM_IOCTL_PSB_SIZES, psb_sizes_ioctl, DRM_AUTH),
+	PSB_IOCTL_DEF(DRM_IOCTL_PSB_DC_STATE, psb_dc_state_ioctl, DRM_AUTH),
+	PSB_IOCTL_DEF(DRM_IOCTL_PSB_ADB, psb_adb_ioctl, DRM_AUTH),
+	PSB_IOCTL_DEF(DRM_IOCTL_PSB_MODE_OPERATION, psb_mode_operation_ioctl,
+		      DRM_AUTH),
+	PSB_IOCTL_DEF(DRM_IOCTL_PSB_STOLEN_MEMORY, psb_stolen_memory_ioctl,
+		      DRM_AUTH),
+	PSB_IOCTL_DEF(DRM_IOCTL_PSB_REGISTER_RW, psb_register_rw_ioctl,
+		      DRM_AUTH),
+	PSB_IOCTL_DEF(DRM_IOCTL_PSB_DPST, psb_dpst_ioctl, DRM_AUTH),
+	PSB_IOCTL_DEF(DRM_IOCTL_PSB_GAMMA, psb_gamma_ioctl, DRM_AUTH),
+	PSB_IOCTL_DEF(DRM_IOCTL_PSB_DPST_BL, psb_dpst_bl_ioctl, DRM_AUTH),
+	PSB_IOCTL_DEF(DRM_IOCTL_PSB_GET_PIPE_FROM_CRTC_ID,
+					psb_intel_get_pipe_from_crtc_id, 0),
+	PSB_IOCTL_DEF(DRM_IOCTL_PSB_GEM_CREATE, psb_gem_create_ioctl,
+						DRM_UNLOCKED | DRM_AUTH),
+	PSB_IOCTL_DEF(DRM_IOCTL_PSB_GEM_MMAP, psb_gem_mmap_ioctl,
+						DRM_UNLOCKED | DRM_AUTH),
+};
+
+static void psb_lastclose(struct drm_device *dev)
+{
+	return;
+}
+
+static void psb_do_takedown(struct drm_device *dev)
+{
+	/* FIXME: do we need to clean up the gtt here ? */
+}
+
+static int psb_do_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct psb_gtt *pg = &dev_priv->gtt;
+
+	uint32_t stolen_gtt;
+
+	int ret = -ENOMEM;
+
+	if (pg->mmu_gatt_start & 0x0FFFFFFF) {
+		dev_err(dev->dev, "Gatt must be 256M aligned. This is a bug.\n");
+		ret = -EINVAL;
+		goto out_err;
+	}
+
+
+	stolen_gtt = (pg->stolen_size >> PAGE_SHIFT) * 4;
+	stolen_gtt = (stolen_gtt + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	stolen_gtt =
+	    (stolen_gtt < pg->gtt_pages) ? stolen_gtt : pg->gtt_pages;
+
+	dev_priv->gatt_free_offset = pg->mmu_gatt_start +
+	    (stolen_gtt << PAGE_SHIFT) * 1024;
+
+	if (1 || drm_debug) {
+		uint32_t core_id = PSB_RSGX32(PSB_CR_CORE_ID);
+		uint32_t core_rev = PSB_RSGX32(PSB_CR_CORE_REVISION);
+		DRM_INFO("SGX core id = 0x%08x\n", core_id);
+		DRM_INFO("SGX core rev major = 0x%02x, minor = 0x%02x\n",
+			 (core_rev & _PSB_CC_REVISION_MAJOR_MASK) >>
+			 _PSB_CC_REVISION_MAJOR_SHIFT,
+			 (core_rev & _PSB_CC_REVISION_MINOR_MASK) >>
+			 _PSB_CC_REVISION_MINOR_SHIFT);
+		DRM_INFO
+		    ("SGX core rev maintenance = 0x%02x, designer = 0x%02x\n",
+		     (core_rev & _PSB_CC_REVISION_MAINTENANCE_MASK) >>
+		     _PSB_CC_REVISION_MAINTENANCE_SHIFT,
+		     (core_rev & _PSB_CC_REVISION_DESIGNER_MASK) >>
+		     _PSB_CC_REVISION_DESIGNER_SHIFT);
+	}
+
+
+	spin_lock_init(&dev_priv->irqmask_lock);
+	mutex_init(&dev_priv->mutex_2d);
+
+	PSB_WSGX32(0x00000000, PSB_CR_BIF_BANK0);
+	PSB_WSGX32(0x00000000, PSB_CR_BIF_BANK1);
+	PSB_RSGX32(PSB_CR_BIF_BANK1);
+	PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) | _PSB_MMU_ER_MASK,
+							PSB_CR_BIF_CTRL);
+	psb_spank(dev_priv);
+
+	/* mmu_gatt ?? */
+	PSB_WSGX32(pg->gatt_start, PSB_CR_BIF_TWOD_REQ_BASE);
+	return 0;
+out_err:
+	psb_do_takedown(dev);
+	return ret;
+}
+
+static int psb_driver_unload(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	/* Kill vblank etc here */
+
+	gma_backlight_exit(dev);
+
+	if (drm_psb_no_fb == 0)
+		psb_modeset_cleanup(dev);
+
+	if (dev_priv) {
+		psb_lid_timer_takedown(dev_priv);
+		gma_intel_opregion_exit(dev);
+
+		if (dev_priv->ops->chip_teardown)
+			dev_priv->ops->chip_teardown(dev);
+		psb_do_takedown(dev);
+
+
+		if (dev_priv->pf_pd) {
+			psb_mmu_free_pagedir(dev_priv->pf_pd);
+			dev_priv->pf_pd = NULL;
+		}
+		if (dev_priv->mmu) {
+			struct psb_gtt *pg = &dev_priv->gtt;
+
+			down_read(&pg->sem);
+			psb_mmu_remove_pfn_sequence(
+				psb_mmu_get_default_pd
+				(dev_priv->mmu),
+				pg->mmu_gatt_start,
+				dev_priv->vram_stolen_size >> PAGE_SHIFT);
+			up_read(&pg->sem);
+			psb_mmu_driver_takedown(dev_priv->mmu);
+			dev_priv->mmu = NULL;
+		}
+		psb_gtt_takedown(dev);
+		if (dev_priv->scratch_page) {
+			__free_page(dev_priv->scratch_page);
+			dev_priv->scratch_page = NULL;
+		}
+		if (dev_priv->vdc_reg) {
+			iounmap(dev_priv->vdc_reg);
+			dev_priv->vdc_reg = NULL;
+		}
+		if (dev_priv->sgx_reg) {
+			iounmap(dev_priv->sgx_reg);
+			dev_priv->sgx_reg = NULL;
+		}
+
+		kfree(dev_priv);
+		dev->dev_private = NULL;
+
+		/*destroy VBT data*/
+		psb_intel_destroy_bios(dev);
+	}
+
+	gma_power_uninit(dev);
+
+	return 0;
+}
+
+
+static int psb_driver_load(struct drm_device *dev, unsigned long chipset)
+{
+	struct drm_psb_private *dev_priv;
+	unsigned long resource_start;
+	struct psb_gtt *pg;
+	unsigned long irqflags;
+	int ret = -ENOMEM;
+	uint32_t tt_pages;
+	struct drm_connector *connector;
+	struct psb_intel_output *psb_intel_output;
+
+	dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
+	if (dev_priv == NULL)
+		return -ENOMEM;
+
+	dev_priv->ops = (struct psb_ops *)chipset;
+	dev_priv->dev = dev;
+	dev->dev_private = (void *) dev_priv;
+
+	dev_priv->num_pipe = dev_priv->ops->pipes;
+
+	resource_start = pci_resource_start(dev->pdev, PSB_MMIO_RESOURCE);
+
+	dev_priv->vdc_reg =
+	    ioremap(resource_start + PSB_VDC_OFFSET, PSB_VDC_SIZE);
+	if (!dev_priv->vdc_reg)
+		goto out_err;
+
+	dev_priv->sgx_reg = ioremap(resource_start + dev_priv->ops->sgx_offset,
+							PSB_SGX_SIZE);
+	if (!dev_priv->sgx_reg)
+		goto out_err;
+
+	ret = dev_priv->ops->chip_setup(dev);
+	if (ret)
+		goto out_err;
+
+	/* Init OSPM support */
+	gma_power_init(dev);
+
+	ret = -ENOMEM;
+
+	dev_priv->scratch_page = alloc_page(GFP_DMA32 | __GFP_ZERO);
+	if (!dev_priv->scratch_page)
+		goto out_err;
+
+	set_pages_uc(dev_priv->scratch_page, 1);
+
+	ret = psb_gtt_init(dev, 0);
+	if (ret)
+		goto out_err;
+
+	dev_priv->mmu = psb_mmu_driver_init((void *)0,
+					drm_psb_trap_pagefaults, 0,
+					dev_priv);
+	if (!dev_priv->mmu)
+		goto out_err;
+
+	pg = &dev_priv->gtt;
+
+	tt_pages = (pg->gatt_pages < PSB_TT_PRIV0_PLIMIT) ?
+		(pg->gatt_pages) : PSB_TT_PRIV0_PLIMIT;
+
+
+	dev_priv->pf_pd = psb_mmu_alloc_pd(dev_priv->mmu, 1, 0);
+	if (!dev_priv->pf_pd)
+		goto out_err;
+
+	psb_mmu_set_pd_context(psb_mmu_get_default_pd(dev_priv->mmu), 0);
+	psb_mmu_set_pd_context(dev_priv->pf_pd, 1);
+
+	ret = psb_do_init(dev);
+	if (ret)
+		return ret;
+
+	PSB_WSGX32(0x20000000, PSB_CR_PDS_EXEC_BASE);
+	PSB_WSGX32(0x30000000, PSB_CR_BIF_3D_REQ_BASE);
+
+/*	igd_opregion_init(&dev_priv->opregion_dev); */
+	acpi_video_register();
+	if (dev_priv->lid_state)
+		psb_lid_timer_init(dev_priv);
+
+	ret = drm_vblank_init(dev, dev_priv->num_pipe);
+	if (ret)
+		goto out_err;
+
+	/*
+	 * Install interrupt handlers prior to powering off SGX or else we will
+	 * crash.
+	 */
+	dev_priv->vdc_irq_mask = 0;
+	dev_priv->pipestat[0] = 0;
+	dev_priv->pipestat[1] = 0;
+	dev_priv->pipestat[2] = 0;
+	spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
+	PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM);
+	PSB_WVDC32(0x00000000, PSB_INT_ENABLE_R);
+	PSB_WVDC32(0xFFFFFFFF, PSB_INT_MASK_R);
+	spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		drm_irq_install(dev);
+
+	dev->vblank_disable_allowed = 1;
+
+	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
+
+	dev->driver->get_vblank_counter = psb_get_vblank_counter;
+
+	if (drm_psb_no_fb == 0) {
+		psb_modeset_init(dev);
+		psb_fbdev_init(dev);
+		drm_kms_helper_poll_init(dev);
+	}
+
+	/* Only add backlight support if we have LVDS output */
+	list_for_each_entry(connector, &dev->mode_config.connector_list,
+			    head) {
+		psb_intel_output = to_psb_intel_output(connector);
+
+		switch (psb_intel_output->type) {
+		case INTEL_OUTPUT_LVDS:
+		case INTEL_OUTPUT_MIPI:
+			ret = gma_backlight_init(dev);
+			break;
+		}
+	}
+
+	if (ret)
+		return ret;
+#if 0
+	/*enable runtime pm at last*/
+	pm_runtime_enable(&dev->pdev->dev);
+	pm_runtime_set_active(&dev->pdev->dev);
+#endif
+	/*Intel drm driver load is done, continue doing pvr load*/
+	return 0;
+out_err:
+	psb_driver_unload(dev);
+	return ret;
+}
+
+int psb_driver_device_is_agp(struct drm_device *dev)
+{
+	return 0;
+}
+
+
+static int psb_sizes_ioctl(struct drm_device *dev, void *data,
+			   struct drm_file *file_priv)
+{
+	struct drm_psb_private *dev_priv = psb_priv(dev);
+	struct drm_psb_sizes_arg *arg =
+		(struct drm_psb_sizes_arg *) data;
+
+	*arg = dev_priv->sizes;
+	return 0;
+}
+
+static int psb_dc_state_ioctl(struct drm_device *dev, void * data,
+				struct drm_file *file_priv)
+{
+	uint32_t flags;
+	uint32_t obj_id;
+	struct drm_mode_object *obj;
+	struct drm_connector *connector;
+	struct drm_crtc *crtc;
+	struct drm_psb_dc_state_arg *arg = data;
+
+
+	/* Double check MRST case */
+	if (IS_MRST(dev) || IS_MFLD(dev))
+		return -EOPNOTSUPP;
+
+	flags = arg->flags;
+	obj_id = arg->obj_id;
+
+	if (flags & PSB_DC_CRTC_MASK) {
+		obj = drm_mode_object_find(dev, obj_id,
+				DRM_MODE_OBJECT_CRTC);
+		if (!obj) {
+			dev_dbg(dev->dev, "Invalid CRTC object.\n");
+			return -EINVAL;
+		}
+
+		crtc = obj_to_crtc(obj);
+
+		mutex_lock(&dev->mode_config.mutex);
+		if (drm_helper_crtc_in_use(crtc)) {
+			if (flags & PSB_DC_CRTC_SAVE)
+				crtc->funcs->save(crtc);
+			else
+				crtc->funcs->restore(crtc);
+		}
+		mutex_unlock(&dev->mode_config.mutex);
+
+		return 0;
+	} else if (flags & PSB_DC_OUTPUT_MASK) {
+		obj = drm_mode_object_find(dev, obj_id,
+				DRM_MODE_OBJECT_CONNECTOR);
+		if (!obj) {
+			dev_dbg(dev->dev, "Invalid connector id.\n");
+			return -EINVAL;
+		}
+
+		connector = obj_to_connector(obj);
+		if (flags & PSB_DC_OUTPUT_SAVE)
+			connector->funcs->save(connector);
+		else
+			connector->funcs->restore(connector);
+
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static inline void get_brightness(struct backlight_device *bd)
+{
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+	if (bd) {
+		bd->props.brightness = bd->ops->get_brightness(bd);
+		backlight_update_status(bd);
+	}
+#endif
+}
+
+static int psb_dpst_bl_ioctl(struct drm_device *dev, void *data,
+		       struct drm_file *file_priv)
+{
+	struct drm_psb_private *dev_priv = psb_priv(dev);
+	uint32_t *arg = data;
+
+	dev_priv->blc_adj2 = *arg;
+	get_brightness(dev_priv->backlight_device);
+	return 0;
+}
+
+static int psb_adb_ioctl(struct drm_device *dev, void *data,
+			struct drm_file *file_priv)
+{
+	struct drm_psb_private *dev_priv = psb_priv(dev);
+	uint32_t *arg = data;
+
+	dev_priv->blc_adj1 = *arg;
+	get_brightness(dev_priv->backlight_device);
+	return 0;
+}
+
+/* return the current mode to the dpst module */
+static int psb_dpst_ioctl(struct drm_device *dev, void *data,
+			  struct drm_file *file_priv)
+{
+	struct drm_psb_private *dev_priv = psb_priv(dev);
+	uint32_t *arg = data;
+	uint32_t x;
+	uint32_t y;
+	uint32_t reg;
+
+	if (!gma_power_begin(dev, 0))
+		return -EIO;
+
+	reg = PSB_RVDC32(PIPEASRC);
+
+	gma_power_end(dev);
+
+	/* horizontal is the left 16 bits */
+	x = reg >> 16;
+	/* vertical is the right 16 bits */
+	y = reg & 0x0000ffff;
+
+	/* the values are the image size minus one */
+	x++;
+	y++;
+
+	*arg = (x << 16) | y;
+
+	return 0;
+}
+static int psb_gamma_ioctl(struct drm_device *dev, void *data,
+			   struct drm_file *file_priv)
+{
+	struct drm_psb_dpst_lut_arg *lut_arg = data;
+	struct drm_mode_object *obj;
+	struct drm_crtc *crtc;
+	struct drm_connector *connector;
+	struct psb_intel_crtc *psb_intel_crtc;
+	int i = 0;
+	int32_t obj_id;
+
+	obj_id = lut_arg->output_id;
+	obj = drm_mode_object_find(dev, obj_id, DRM_MODE_OBJECT_CONNECTOR);
+	if (!obj) {
+		dev_dbg(dev->dev, "Invalid Connector object.\n");
+		return -EINVAL;
+	}
+
+	connector = obj_to_connector(obj);
+	crtc = connector->encoder->crtc;
+	psb_intel_crtc = to_psb_intel_crtc(crtc);
+
+	for (i = 0; i < 256; i++)
+		psb_intel_crtc->lut_adj[i] = lut_arg->lut[i];
+
+	psb_intel_crtc_load_lut(crtc);
+
+	return 0;
+}
+
+static int psb_mode_operation_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *file_priv)
+{
+	uint32_t obj_id;
+	uint16_t op;
+	struct drm_mode_modeinfo *umode;
+	struct drm_display_mode *mode = NULL;
+	struct drm_psb_mode_operation_arg *arg;
+	struct drm_mode_object *obj;
+	struct drm_connector *connector;
+	struct drm_framebuffer *drm_fb;
+	struct psb_framebuffer *psb_fb;
+	struct drm_connector_helper_funcs *connector_funcs;
+	int ret = 0;
+	int resp = MODE_OK;
+	struct drm_psb_private *dev_priv = psb_priv(dev);
+
+	arg = (struct drm_psb_mode_operation_arg *)data;
+	obj_id = arg->obj_id;
+	op = arg->operation;
+
+	switch (op) {
+	case PSB_MODE_OPERATION_SET_DC_BASE:
+		obj = drm_mode_object_find(dev, obj_id, DRM_MODE_OBJECT_FB);
+		if (!obj) {
+			dev_dbg(dev->dev, "Invalid FB id %d\n", obj_id);
+			return -EINVAL;
+		}
+
+		drm_fb = obj_to_fb(obj);
+		psb_fb = to_psb_fb(drm_fb);
+
+		if (gma_power_begin(dev, 0)) {
+			REG_WRITE(DSPASURF, psb_fb->gtt->offset);
+			REG_READ(DSPASURF);
+			gma_power_end(dev);
+		} else {
+			dev_priv->saveDSPASURF = psb_fb->gtt->offset;
+		}
+
+		return 0;
+	case PSB_MODE_OPERATION_MODE_VALID:
+		umode = &arg->mode;
+
+		mutex_lock(&dev->mode_config.mutex);
+
+		obj = drm_mode_object_find(dev, obj_id,
+					DRM_MODE_OBJECT_CONNECTOR);
+		if (!obj) {
+			ret = -EINVAL;
+			goto mode_op_out;
+		}
+
+		connector = obj_to_connector(obj);
+
+		mode = drm_mode_create(dev);
+		if (!mode) {
+			ret = -ENOMEM;
+			goto mode_op_out;
+		}
+
+		/* drm_crtc_convert_umode(mode, umode); */
+		{
+			mode->clock = umode->clock;
+			mode->hdisplay = umode->hdisplay;
+			mode->hsync_start = umode->hsync_start;
+			mode->hsync_end = umode->hsync_end;
+			mode->htotal = umode->htotal;
+			mode->hskew = umode->hskew;
+			mode->vdisplay = umode->vdisplay;
+			mode->vsync_start = umode->vsync_start;
+			mode->vsync_end = umode->vsync_end;
+			mode->vtotal = umode->vtotal;
+			mode->vscan = umode->vscan;
+			mode->vrefresh = umode->vrefresh;
+			mode->flags = umode->flags;
+			mode->type = umode->type;
+			strncpy(mode->name, umode->name, DRM_DISPLAY_MODE_LEN);
+			mode->name[DRM_DISPLAY_MODE_LEN-1] = 0;
+		}
+
+		connector_funcs = (struct drm_connector_helper_funcs *)
+				   connector->helper_private;
+
+		if (connector_funcs->mode_valid) {
+			resp = connector_funcs->mode_valid(connector, mode);
+			arg->data = (void *)resp;
+		}
+
+		/*do some clean up work*/
+		if (mode)
+			drm_mode_destroy(dev, mode);
+mode_op_out:
+		mutex_unlock(&dev->mode_config.mutex);
+		return ret;
+
+	default:
+		dev_dbg(dev->dev, "Unsupported psb mode operation\n");
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int psb_stolen_memory_ioctl(struct drm_device *dev, void *data,
+				   struct drm_file *file_priv)
+{
+	struct drm_psb_private *dev_priv = psb_priv(dev);
+	struct drm_psb_stolen_memory_arg *arg = data;
+
+	arg->base = dev_priv->stolen_base;
+	arg->size = dev_priv->vram_stolen_size;
+
+	return 0;
+}
+
+/* FIXME: needs Medfield changes */
+static int psb_register_rw_ioctl(struct drm_device *dev, void *data,
+				 struct drm_file *file_priv)
+{
+	struct drm_psb_private *dev_priv = psb_priv(dev);
+	struct drm_psb_register_rw_arg *arg = data;
+	bool usage = arg->b_force_hw_on ? true : false;
+
+	if (arg->display_write_mask != 0) {
+		if (gma_power_begin(dev, usage)) {
+			if (arg->display_write_mask & REGRWBITS_PFIT_CONTROLS)
+				PSB_WVDC32(arg->display.pfit_controls,
+					   PFIT_CONTROL);
+			if (arg->display_write_mask &
+			    REGRWBITS_PFIT_AUTOSCALE_RATIOS)
+				PSB_WVDC32(arg->display.pfit_autoscale_ratios,
+					   PFIT_AUTO_RATIOS);
+			if (arg->display_write_mask &
+			    REGRWBITS_PFIT_PROGRAMMED_SCALE_RATIOS)
+				PSB_WVDC32(
+				   arg->display.pfit_programmed_scale_ratios,
+				   PFIT_PGM_RATIOS);
+			if (arg->display_write_mask & REGRWBITS_PIPEASRC)
+				PSB_WVDC32(arg->display.pipeasrc,
+					   PIPEASRC);
+			if (arg->display_write_mask & REGRWBITS_PIPEBSRC)
+				PSB_WVDC32(arg->display.pipebsrc,
+					   PIPEBSRC);
+			if (arg->display_write_mask & REGRWBITS_VTOTAL_A)
+				PSB_WVDC32(arg->display.vtotal_a,
+					   VTOTAL_A);
+			if (arg->display_write_mask & REGRWBITS_VTOTAL_B)
+				PSB_WVDC32(arg->display.vtotal_b,
+					   VTOTAL_B);
+			gma_power_end(dev);
+		} else {
+			if (arg->display_write_mask & REGRWBITS_PFIT_CONTROLS)
+				dev_priv->savePFIT_CONTROL =
+						arg->display.pfit_controls;
+			if (arg->display_write_mask &
+			    REGRWBITS_PFIT_AUTOSCALE_RATIOS)
+				dev_priv->savePFIT_AUTO_RATIOS =
+					arg->display.pfit_autoscale_ratios;
+			if (arg->display_write_mask &
+			    REGRWBITS_PFIT_PROGRAMMED_SCALE_RATIOS)
+				dev_priv->savePFIT_PGM_RATIOS =
+				   arg->display.pfit_programmed_scale_ratios;
+			if (arg->display_write_mask & REGRWBITS_PIPEASRC)
+				dev_priv->savePIPEASRC = arg->display.pipeasrc;
+			if (arg->display_write_mask & REGRWBITS_PIPEBSRC)
+				dev_priv->savePIPEBSRC = arg->display.pipebsrc;
+			if (arg->display_write_mask & REGRWBITS_VTOTAL_A)
+				dev_priv->saveVTOTAL_A = arg->display.vtotal_a;
+			if (arg->display_write_mask & REGRWBITS_VTOTAL_B)
+				dev_priv->saveVTOTAL_B = arg->display.vtotal_b;
+		}
+	}
+
+	if (arg->display_read_mask != 0) {
+		if (gma_power_begin(dev, usage)) {
+			if (arg->display_read_mask &
+			    REGRWBITS_PFIT_CONTROLS)
+				arg->display.pfit_controls =
+						PSB_RVDC32(PFIT_CONTROL);
+			if (arg->display_read_mask &
+			    REGRWBITS_PFIT_AUTOSCALE_RATIOS)
+				arg->display.pfit_autoscale_ratios =
+						PSB_RVDC32(PFIT_AUTO_RATIOS);
+			if (arg->display_read_mask &
+			    REGRWBITS_PFIT_PROGRAMMED_SCALE_RATIOS)
+				arg->display.pfit_programmed_scale_ratios =
+						PSB_RVDC32(PFIT_PGM_RATIOS);
+			if (arg->display_read_mask & REGRWBITS_PIPEASRC)
+				arg->display.pipeasrc = PSB_RVDC32(PIPEASRC);
+			if (arg->display_read_mask & REGRWBITS_PIPEBSRC)
+				arg->display.pipebsrc = PSB_RVDC32(PIPEBSRC);
+			if (arg->display_read_mask & REGRWBITS_VTOTAL_A)
+				arg->display.vtotal_a = PSB_RVDC32(VTOTAL_A);
+			if (arg->display_read_mask & REGRWBITS_VTOTAL_B)
+				arg->display.vtotal_b = PSB_RVDC32(VTOTAL_B);
+			gma_power_end(dev);
+		} else {
+			if (arg->display_read_mask &
+			    REGRWBITS_PFIT_CONTROLS)
+				arg->display.pfit_controls =
+						dev_priv->savePFIT_CONTROL;
+			if (arg->display_read_mask &
+			    REGRWBITS_PFIT_AUTOSCALE_RATIOS)
+				arg->display.pfit_autoscale_ratios =
+						dev_priv->savePFIT_AUTO_RATIOS;
+			if (arg->display_read_mask &
+			    REGRWBITS_PFIT_PROGRAMMED_SCALE_RATIOS)
+				arg->display.pfit_programmed_scale_ratios =
+						dev_priv->savePFIT_PGM_RATIOS;
+			if (arg->display_read_mask & REGRWBITS_PIPEASRC)
+				arg->display.pipeasrc = dev_priv->savePIPEASRC;
+			if (arg->display_read_mask & REGRWBITS_PIPEBSRC)
+				arg->display.pipebsrc = dev_priv->savePIPEBSRC;
+			if (arg->display_read_mask & REGRWBITS_VTOTAL_A)
+				arg->display.vtotal_a = dev_priv->saveVTOTAL_A;
+			if (arg->display_read_mask & REGRWBITS_VTOTAL_B)
+				arg->display.vtotal_b = dev_priv->saveVTOTAL_B;
+		}
+	}
+
+	if (arg->overlay_write_mask != 0) {
+		if (gma_power_begin(dev, usage)) {
+			if (arg->overlay_write_mask & OV_REGRWBITS_OGAM_ALL) {
+				PSB_WVDC32(arg->overlay.OGAMC5, OV_OGAMC5);
+				PSB_WVDC32(arg->overlay.OGAMC4, OV_OGAMC4);
+				PSB_WVDC32(arg->overlay.OGAMC3, OV_OGAMC3);
+				PSB_WVDC32(arg->overlay.OGAMC2, OV_OGAMC2);
+				PSB_WVDC32(arg->overlay.OGAMC1, OV_OGAMC1);
+				PSB_WVDC32(arg->overlay.OGAMC0, OV_OGAMC0);
+			}
+			if (arg->overlay_write_mask & OVC_REGRWBITS_OGAM_ALL) {
+				PSB_WVDC32(arg->overlay.OGAMC5, OVC_OGAMC5);
+				PSB_WVDC32(arg->overlay.OGAMC4, OVC_OGAMC4);
+				PSB_WVDC32(arg->overlay.OGAMC3, OVC_OGAMC3);
+				PSB_WVDC32(arg->overlay.OGAMC2, OVC_OGAMC2);
+				PSB_WVDC32(arg->overlay.OGAMC1, OVC_OGAMC1);
+				PSB_WVDC32(arg->overlay.OGAMC0, OVC_OGAMC0);
+			}
+
+			if (arg->overlay_write_mask & OV_REGRWBITS_OVADD) {
+				PSB_WVDC32(arg->overlay.OVADD, OV_OVADD);
+
+				if (arg->overlay.b_wait_vblank) {
+					/* Wait for 20ms.*/
+					unsigned long vblank_timeout = jiffies
+								+ HZ/50;
+					uint32_t temp;
+					while (time_before_eq(jiffies,
+							vblank_timeout)) {
+						temp = PSB_RVDC32(OV_DOVASTA);
+						if ((temp & (0x1 << 31)) != 0)
+							break;
+						cpu_relax();
+					}
+				}
+			}
+			if (arg->overlay_write_mask & OVC_REGRWBITS_OVADD) {
+				PSB_WVDC32(arg->overlay.OVADD, OVC_OVADD);
+				if (arg->overlay.b_wait_vblank) {
+					/* Wait for 20ms.*/
+					unsigned long vblank_timeout =
+							jiffies + HZ/50;
+					uint32_t temp;
+					while (time_before_eq(jiffies,
+							vblank_timeout)) {
+						temp = PSB_RVDC32(OVC_DOVCSTA);
+						if ((temp & (0x1 << 31)) != 0)
+							break;
+						cpu_relax();
+					}
+				}
+			}
+			gma_power_end(dev);
+		} else {
+			if (arg->overlay_write_mask & OV_REGRWBITS_OGAM_ALL) {
+				dev_priv->saveOV_OGAMC5 = arg->overlay.OGAMC5;
+				dev_priv->saveOV_OGAMC4 = arg->overlay.OGAMC4;
+				dev_priv->saveOV_OGAMC3 = arg->overlay.OGAMC3;
+				dev_priv->saveOV_OGAMC2 = arg->overlay.OGAMC2;
+				dev_priv->saveOV_OGAMC1 = arg->overlay.OGAMC1;
+				dev_priv->saveOV_OGAMC0 = arg->overlay.OGAMC0;
+			}
+			if (arg->overlay_write_mask & OVC_REGRWBITS_OGAM_ALL) {
+				dev_priv->saveOVC_OGAMC5 = arg->overlay.OGAMC5;
+				dev_priv->saveOVC_OGAMC4 = arg->overlay.OGAMC4;
+				dev_priv->saveOVC_OGAMC3 = arg->overlay.OGAMC3;
+				dev_priv->saveOVC_OGAMC2 = arg->overlay.OGAMC2;
+				dev_priv->saveOVC_OGAMC1 = arg->overlay.OGAMC1;
+				dev_priv->saveOVC_OGAMC0 = arg->overlay.OGAMC0;
+			}
+			if (arg->overlay_write_mask & OV_REGRWBITS_OVADD)
+				dev_priv->saveOV_OVADD = arg->overlay.OVADD;
+			if (arg->overlay_write_mask & OVC_REGRWBITS_OVADD)
+				dev_priv->saveOVC_OVADD = arg->overlay.OVADD;
+		}
+	}
+
+	if (arg->overlay_read_mask != 0) {
+		if (gma_power_begin(dev, usage)) {
+			if (arg->overlay_read_mask & OV_REGRWBITS_OGAM_ALL) {
+				arg->overlay.OGAMC5 = PSB_RVDC32(OV_OGAMC5);
+				arg->overlay.OGAMC4 = PSB_RVDC32(OV_OGAMC4);
+				arg->overlay.OGAMC3 = PSB_RVDC32(OV_OGAMC3);
+				arg->overlay.OGAMC2 = PSB_RVDC32(OV_OGAMC2);
+				arg->overlay.OGAMC1 = PSB_RVDC32(OV_OGAMC1);
+				arg->overlay.OGAMC0 = PSB_RVDC32(OV_OGAMC0);
+			}
+			if (arg->overlay_read_mask & OVC_REGRWBITS_OGAM_ALL) {
+				arg->overlay.OGAMC5 = PSB_RVDC32(OVC_OGAMC5);
+				arg->overlay.OGAMC4 = PSB_RVDC32(OVC_OGAMC4);
+				arg->overlay.OGAMC3 = PSB_RVDC32(OVC_OGAMC3);
+				arg->overlay.OGAMC2 = PSB_RVDC32(OVC_OGAMC2);
+				arg->overlay.OGAMC1 = PSB_RVDC32(OVC_OGAMC1);
+				arg->overlay.OGAMC0 = PSB_RVDC32(OVC_OGAMC0);
+			}
+			if (arg->overlay_read_mask & OV_REGRWBITS_OVADD)
+				arg->overlay.OVADD = PSB_RVDC32(OV_OVADD);
+			if (arg->overlay_read_mask & OVC_REGRWBITS_OVADD)
+				arg->overlay.OVADD = PSB_RVDC32(OVC_OVADD);
+			gma_power_end(dev);
+		} else {
+			if (arg->overlay_read_mask & OV_REGRWBITS_OGAM_ALL) {
+				arg->overlay.OGAMC5 = dev_priv->saveOV_OGAMC5;
+				arg->overlay.OGAMC4 = dev_priv->saveOV_OGAMC4;
+				arg->overlay.OGAMC3 = dev_priv->saveOV_OGAMC3;
+				arg->overlay.OGAMC2 = dev_priv->saveOV_OGAMC2;
+				arg->overlay.OGAMC1 = dev_priv->saveOV_OGAMC1;
+				arg->overlay.OGAMC0 = dev_priv->saveOV_OGAMC0;
+			}
+			if (arg->overlay_read_mask & OVC_REGRWBITS_OGAM_ALL) {
+				arg->overlay.OGAMC5 = dev_priv->saveOVC_OGAMC5;
+				arg->overlay.OGAMC4 = dev_priv->saveOVC_OGAMC4;
+				arg->overlay.OGAMC3 = dev_priv->saveOVC_OGAMC3;
+				arg->overlay.OGAMC2 = dev_priv->saveOVC_OGAMC2;
+				arg->overlay.OGAMC1 = dev_priv->saveOVC_OGAMC1;
+				arg->overlay.OGAMC0 = dev_priv->saveOVC_OGAMC0;
+			}
+			if (arg->overlay_read_mask & OV_REGRWBITS_OVADD)
+				arg->overlay.OVADD = dev_priv->saveOV_OVADD;
+			if (arg->overlay_read_mask & OVC_REGRWBITS_OVADD)
+				arg->overlay.OVADD = dev_priv->saveOVC_OVADD;
+		}
+	}
+
+	if (arg->sprite_enable_mask != 0) {
+		if (gma_power_begin(dev, usage)) {
+			PSB_WVDC32(0x1F3E, DSPARB);
+			PSB_WVDC32(arg->sprite.dspa_control
+					| PSB_RVDC32(DSPACNTR), DSPACNTR);
+			PSB_WVDC32(arg->sprite.dspa_key_value, DSPAKEYVAL);
+			PSB_WVDC32(arg->sprite.dspa_key_mask, DSPAKEYMASK);
+			PSB_WVDC32(PSB_RVDC32(DSPASURF), DSPASURF);
+			PSB_RVDC32(DSPASURF);
+			PSB_WVDC32(arg->sprite.dspc_control, DSPCCNTR);
+			PSB_WVDC32(arg->sprite.dspc_stride, DSPCSTRIDE);
+			PSB_WVDC32(arg->sprite.dspc_position, DSPCPOS);
+			PSB_WVDC32(arg->sprite.dspc_linear_offset, DSPCLINOFF);
+			PSB_WVDC32(arg->sprite.dspc_size, DSPCSIZE);
+			PSB_WVDC32(arg->sprite.dspc_surface, DSPCSURF);
+			PSB_RVDC32(DSPCSURF);
+			gma_power_end(dev);
+		}
+	}
+
+	if (arg->sprite_disable_mask != 0) {
+		if (gma_power_begin(dev, usage)) {
+			PSB_WVDC32(0x3F3E, DSPARB);
+			PSB_WVDC32(0x0, DSPCCNTR);
+			PSB_WVDC32(arg->sprite.dspc_surface, DSPCSURF);
+			PSB_RVDC32(DSPCSURF);
+			gma_power_end(dev);
+		}
+	}
+
+	if (arg->subpicture_enable_mask != 0) {
+		if (gma_power_begin(dev, usage)) {
+			uint32_t temp;
+			if (arg->subpicture_enable_mask & REGRWBITS_DSPACNTR) {
+				temp =  PSB_RVDC32(DSPACNTR);
+				temp &= ~DISPPLANE_PIXFORMAT_MASK;
+				temp &= ~DISPPLANE_BOTTOM;
+				temp |= DISPPLANE_32BPP;
+				PSB_WVDC32(temp, DSPACNTR);
+
+				temp =  PSB_RVDC32(DSPABASE);
+				PSB_WVDC32(temp, DSPABASE);
+				PSB_RVDC32(DSPABASE);
+				temp =  PSB_RVDC32(DSPASURF);
+				PSB_WVDC32(temp, DSPASURF);
+				PSB_RVDC32(DSPASURF);
+			}
+			if (arg->subpicture_enable_mask & REGRWBITS_DSPBCNTR) {
+				temp =  PSB_RVDC32(DSPBCNTR);
+				temp &= ~DISPPLANE_PIXFORMAT_MASK;
+				temp &= ~DISPPLANE_BOTTOM;
+				temp |= DISPPLANE_32BPP;
+				PSB_WVDC32(temp, DSPBCNTR);
+
+				temp =  PSB_RVDC32(DSPBBASE);
+				PSB_WVDC32(temp, DSPBBASE);
+				PSB_RVDC32(DSPBBASE);
+				temp =  PSB_RVDC32(DSPBSURF);
+				PSB_WVDC32(temp, DSPBSURF);
+				PSB_RVDC32(DSPBSURF);
+			}
+			if (arg->subpicture_enable_mask & REGRWBITS_DSPCCNTR) {
+				temp =  PSB_RVDC32(DSPCCNTR);
+				temp &= ~DISPPLANE_PIXFORMAT_MASK;
+				temp &= ~DISPPLANE_BOTTOM;
+				temp |= DISPPLANE_32BPP;
+				PSB_WVDC32(temp, DSPCCNTR);
+
+				temp =  PSB_RVDC32(DSPCBASE);
+				PSB_WVDC32(temp, DSPCBASE);
+				PSB_RVDC32(DSPCBASE);
+				temp =  PSB_RVDC32(DSPCSURF);
+				PSB_WVDC32(temp, DSPCSURF);
+				PSB_RVDC32(DSPCSURF);
+			}
+			gma_power_end(dev);
+		}
+	}
+
+	if (arg->subpicture_disable_mask != 0) {
+		if (gma_power_begin(dev, usage)) {
+			uint32_t temp;
+			if (arg->subpicture_disable_mask & REGRWBITS_DSPACNTR) {
+				temp =  PSB_RVDC32(DSPACNTR);
+				temp &= ~DISPPLANE_PIXFORMAT_MASK;
+				temp |= DISPPLANE_32BPP_NO_ALPHA;
+				PSB_WVDC32(temp, DSPACNTR);
+
+				temp =  PSB_RVDC32(DSPABASE);
+				PSB_WVDC32(temp, DSPABASE);
+				PSB_RVDC32(DSPABASE);
+				temp =  PSB_RVDC32(DSPASURF);
+				PSB_WVDC32(temp, DSPASURF);
+				PSB_RVDC32(DSPASURF);
+			}
+			if (arg->subpicture_disable_mask & REGRWBITS_DSPBCNTR) {
+				temp =  PSB_RVDC32(DSPBCNTR);
+				temp &= ~DISPPLANE_PIXFORMAT_MASK;
+				temp |= DISPPLANE_32BPP_NO_ALPHA;
+				PSB_WVDC32(temp, DSPBCNTR);
+
+				temp =  PSB_RVDC32(DSPBBASE);
+				PSB_WVDC32(temp, DSPBBASE);
+				PSB_RVDC32(DSPBBASE);
+				temp =  PSB_RVDC32(DSPBSURF);
+				PSB_WVDC32(temp, DSPBSURF);
+				PSB_RVDC32(DSPBSURF);
+			}
+			if (arg->subpicture_disable_mask & REGRWBITS_DSPCCNTR) {
+				temp =  PSB_RVDC32(DSPCCNTR);
+				temp &= ~DISPPLANE_PIXFORMAT_MASK;
+				temp |= DISPPLANE_32BPP_NO_ALPHA;
+				PSB_WVDC32(temp, DSPCCNTR);
+
+				temp =  PSB_RVDC32(DSPCBASE);
+				PSB_WVDC32(temp, DSPCBASE);
+				PSB_RVDC32(DSPCBASE);
+				temp =  PSB_RVDC32(DSPCSURF);
+				PSB_WVDC32(temp, DSPCSURF);
+				PSB_RVDC32(DSPCSURF);
+			}
+			gma_power_end(dev);
+		}
+	}
+
+	return 0;
+}
+
+static int psb_driver_open(struct drm_device *dev, struct drm_file *priv)
+{
+	return 0;
+}
+
+static void psb_driver_close(struct drm_device *dev, struct drm_file *priv)
+{
+}
+
+static long psb_unlocked_ioctl(struct file *filp, unsigned int cmd,
+			       unsigned long arg)
+{
+	struct drm_file *file_priv = filp->private_data;
+	struct drm_device *dev = file_priv->minor->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	static unsigned int runtime_allowed;
+
+	if (runtime_allowed == 1 && dev_priv->is_lvds_on) {
+		runtime_allowed++;
+		pm_runtime_allow(&dev->pdev->dev);
+		dev_priv->rpm_enabled = 1;
+	}
+	return drm_ioctl(filp, cmd, arg);
+	/* FIXME: do we need to wrap the other side of this */
+}
+
+
+/* When a client dies:
+ *    - Check for and clean up flipped page state
+ */
+void psb_driver_preclose(struct drm_device *dev, struct drm_file *priv)
+{
+}
+
+static void psb_remove(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+	drm_put_dev(dev);
+}
+
+static const struct dev_pm_ops psb_pm_ops = {
+	.resume = gma_power_resume,
+	.suspend = gma_power_suspend,
+	.runtime_suspend = psb_runtime_suspend,
+	.runtime_resume = psb_runtime_resume,
+	.runtime_idle = psb_runtime_idle,
+};
+
+static struct vm_operations_struct psb_gem_vm_ops = {
+	.fault = psb_gem_fault,
+	.open = drm_gem_vm_open,
+	.close = drm_gem_vm_close,
+};
+
+static struct drm_driver driver = {
+	.driver_features = DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | \
+			   DRIVER_IRQ_VBL | DRIVER_MODESET | DRIVER_GEM ,
+	.load = psb_driver_load,
+	.unload = psb_driver_unload,
+
+	.ioctls = psb_ioctls,
+	.num_ioctls = DRM_ARRAY_SIZE(psb_ioctls),
+	.device_is_agp = psb_driver_device_is_agp,
+	.irq_preinstall = psb_irq_preinstall,
+	.irq_postinstall = psb_irq_postinstall,
+	.irq_uninstall = psb_irq_uninstall,
+	.irq_handler = psb_irq_handler,
+	.enable_vblank = psb_enable_vblank,
+	.disable_vblank = psb_disable_vblank,
+	.get_vblank_counter = psb_get_vblank_counter,
+	.lastclose = psb_lastclose,
+	.open = psb_driver_open,
+	.preclose = psb_driver_preclose,
+	.postclose = psb_driver_close,
+	.reclaim_buffers = drm_core_reclaim_buffers,
+
+	.gem_init_object = psb_gem_init_object,
+	.gem_free_object = psb_gem_free_object,
+	.gem_vm_ops = &psb_gem_vm_ops,
+	.dumb_create = psb_gem_dumb_create,
+	.dumb_map_offset = psb_gem_dumb_map_gtt,
+	.dumb_destroy = psb_gem_dumb_destroy,
+
+	.fops = {
+		 .owner = THIS_MODULE,
+		 .open = drm_open,
+		 .release = drm_release,
+		 .unlocked_ioctl = psb_unlocked_ioctl,
+		 .mmap = drm_gem_mmap,
+		 .poll = drm_poll,
+		 .fasync = drm_fasync,
+		 .read = drm_read,
+	 },
+	.name = DRIVER_NAME,
+	.desc = DRIVER_DESC,
+	.date = PSB_DRM_DRIVER_DATE,
+	.major = PSB_DRM_DRIVER_MAJOR,
+	.minor = PSB_DRM_DRIVER_MINOR,
+	.patchlevel = PSB_DRM_DRIVER_PATCHLEVEL
+};
+
+static struct pci_driver psb_pci_driver = {
+	.name = DRIVER_NAME,
+	.id_table = pciidlist,
+	.probe = psb_probe,
+	.remove = psb_remove,
+	.driver.pm = &psb_pm_ops,
+};
+
+static int psb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	/* MLD Added this from Inaky's patch */
+	if (pci_enable_msi(pdev))
+		dev_warn(&pdev->dev, "Enable MSI failed!\n");
+	return drm_get_pci_dev(pdev, ent, &driver);
+}
+
+static int __init psb_init(void)
+{
+	return drm_pci_init(&driver, &psb_pci_driver);
+}
+
+static void __exit psb_exit(void)
+{
+	drm_pci_exit(&driver, &psb_pci_driver);
+}
+
+late_initcall(psb_init);
+module_exit(psb_exit);
+
+MODULE_AUTHOR("Alan Cox <alan@linux.intel.com> and others");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/gma500/psb_drv.h b/drivers/gpu/drm/gma500/psb_drv.h
new file mode 100644
index 0000000..a5ae9b1
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_drv.h
@@ -0,0 +1,924 @@
+/**************************************************************************
+ * Copyright (c) 2007-2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#ifndef _PSB_DRV_H_
+#define _PSB_DRV_H_
+
+#include <linux/kref.h>
+
+#include <drm/drmP.h>
+#include "drm_global.h"
+#include "gem_glue.h"
+#include "psb_drm.h"
+#include "psb_reg.h"
+#include "psb_intel_drv.h"
+#include "gtt.h"
+#include "power.h"
+#include "oaktrail.h"
+
+/* Append new drm mode definition here, align with libdrm definition */
+#define DRM_MODE_SCALE_NO_SCALE   	2
+
+enum {
+	CHIP_PSB_8108 = 0,		/* Poulsbo */
+	CHIP_PSB_8109 = 1,		/* Poulsbo */
+	CHIP_MRST_4100 = 2,		/* Moorestown/Oaktrail */
+	CHIP_MFLD_0130 = 3,		/* Medfield */
+};
+
+#define IS_MRST(dev) (((dev)->pci_device & 0xfffc) == 0x4100)
+#define IS_MFLD(dev) (((dev)->pci_device & 0xfff8) == 0x0130)
+
+/*
+ * Driver definitions
+ */
+
+#define DRIVER_NAME "gma500"
+#define DRIVER_DESC "DRM driver for the Intel GMA500"
+
+#define PSB_DRM_DRIVER_DATE "2011-06-06"
+#define PSB_DRM_DRIVER_MAJOR 1
+#define PSB_DRM_DRIVER_MINOR 0
+#define PSB_DRM_DRIVER_PATCHLEVEL 0
+
+/*
+ *	Hardware offsets
+ */
+#define PSB_VDC_OFFSET		 0x00000000
+#define PSB_VDC_SIZE		 0x000080000
+#define MRST_MMIO_SIZE		 0x0000C0000
+#define MDFLD_MMIO_SIZE          0x000100000
+#define PSB_SGX_SIZE		 0x8000
+#define PSB_SGX_OFFSET		 0x00040000
+#define MRST_SGX_OFFSET		 0x00080000
+/*
+ *	PCI resource identifiers
+ */
+#define PSB_MMIO_RESOURCE	 0
+#define PSB_GATT_RESOURCE	 2
+#define PSB_GTT_RESOURCE	 3
+/*
+ *	PCI configuration
+ */
+#define PSB_GMCH_CTRL		 0x52
+#define PSB_BSM			 0x5C
+#define _PSB_GMCH_ENABLED	 0x4
+#define PSB_PGETBL_CTL		 0x2020
+#define _PSB_PGETBL_ENABLED	 0x00000001
+#define PSB_SGX_2D_SLAVE_PORT	 0x4000
+
+/* To get rid of */
+#define PSB_TT_PRIV0_LIMIT	 (256*1024*1024)
+#define PSB_TT_PRIV0_PLIMIT	 (PSB_TT_PRIV0_LIMIT >> PAGE_SHIFT)
+
+/*
+ *	SGX side MMU definitions (these can probably go)
+ */
+
+/*
+ *	Flags for external memory type field.
+ */
+#define PSB_MMU_CACHED_MEMORY	  0x0001	/* Bind to MMU only */
+#define PSB_MMU_RO_MEMORY	  0x0002	/* MMU RO memory */
+#define PSB_MMU_WO_MEMORY	  0x0004	/* MMU WO memory */
+/*
+ *	PTE's and PDE's
+ */
+#define PSB_PDE_MASK		  0x003FFFFF
+#define PSB_PDE_SHIFT		  22
+#define PSB_PTE_SHIFT		  12
+/*
+ *	Cache control
+ */
+#define PSB_PTE_VALID		  0x0001	/* PTE / PDE valid */
+#define PSB_PTE_WO		  0x0002	/* Write only */
+#define PSB_PTE_RO		  0x0004	/* Read only */
+#define PSB_PTE_CACHED		  0x0008	/* CPU cache coherent */
+
+/*
+ *	VDC registers and bits
+ */
+#define PSB_MSVDX_CLOCKGATING	  0x2064
+#define PSB_TOPAZ_CLOCKGATING	  0x2068
+#define PSB_HWSTAM		  0x2098
+#define PSB_INSTPM		  0x20C0
+#define PSB_INT_IDENTITY_R        0x20A4
+#define _MDFLD_PIPEC_EVENT_FLAG   (1<<2)
+#define _MDFLD_PIPEC_VBLANK_FLAG  (1<<3)
+#define _PSB_DPST_PIPEB_FLAG      (1<<4)
+#define _MDFLD_PIPEB_EVENT_FLAG   (1<<4)
+#define _PSB_VSYNC_PIPEB_FLAG	  (1<<5)
+#define _PSB_DPST_PIPEA_FLAG      (1<<6)
+#define _PSB_PIPEA_EVENT_FLAG     (1<<6)
+#define _PSB_VSYNC_PIPEA_FLAG	  (1<<7)
+#define _MDFLD_MIPIA_FLAG	  (1<<16)
+#define _MDFLD_MIPIC_FLAG	  (1<<17)
+#define _PSB_IRQ_SGX_FLAG	  (1<<18)
+#define _PSB_IRQ_MSVDX_FLAG	  (1<<19)
+#define _LNC_IRQ_TOPAZ_FLAG	  (1<<20)
+
+/* This flag includes all the display IRQ bits excepts the vblank irqs. */
+#define _MDFLD_DISP_ALL_IRQ_FLAG (_MDFLD_PIPEC_EVENT_FLAG | \
+				  _MDFLD_PIPEB_EVENT_FLAG | \
+				  _PSB_PIPEA_EVENT_FLAG | \
+				  _PSB_VSYNC_PIPEA_FLAG | \
+				  _MDFLD_MIPIA_FLAG | \
+				  _MDFLD_MIPIC_FLAG)
+#define PSB_INT_IDENTITY_R	  0x20A4
+#define PSB_INT_MASK_R		  0x20A8
+#define PSB_INT_ENABLE_R	  0x20A0
+
+#define _PSB_MMU_ER_MASK      0x0001FF00
+#define _PSB_MMU_ER_HOST      (1 << 16)
+#define GPIOA			0x5010
+#define GPIOB			0x5014
+#define GPIOC			0x5018
+#define GPIOD			0x501c
+#define GPIOE			0x5020
+#define GPIOF			0x5024
+#define GPIOG			0x5028
+#define GPIOH			0x502c
+#define GPIO_CLOCK_DIR_MASK		(1 << 0)
+#define GPIO_CLOCK_DIR_IN		(0 << 1)
+#define GPIO_CLOCK_DIR_OUT		(1 << 1)
+#define GPIO_CLOCK_VAL_MASK		(1 << 2)
+#define GPIO_CLOCK_VAL_OUT		(1 << 3)
+#define GPIO_CLOCK_VAL_IN		(1 << 4)
+#define GPIO_CLOCK_PULLUP_DISABLE	(1 << 5)
+#define GPIO_DATA_DIR_MASK		(1 << 8)
+#define GPIO_DATA_DIR_IN		(0 << 9)
+#define GPIO_DATA_DIR_OUT		(1 << 9)
+#define GPIO_DATA_VAL_MASK		(1 << 10)
+#define GPIO_DATA_VAL_OUT		(1 << 11)
+#define GPIO_DATA_VAL_IN		(1 << 12)
+#define GPIO_DATA_PULLUP_DISABLE	(1 << 13)
+
+#define VCLK_DIVISOR_VGA0   0x6000
+#define VCLK_DIVISOR_VGA1   0x6004
+#define VCLK_POST_DIV	    0x6010
+
+#define PSB_COMM_2D (PSB_ENGINE_2D << 4)
+#define PSB_COMM_3D (PSB_ENGINE_3D << 4)
+#define PSB_COMM_TA (PSB_ENGINE_TA << 4)
+#define PSB_COMM_HP (PSB_ENGINE_HP << 4)
+#define PSB_COMM_USER_IRQ (1024 >> 2)
+#define PSB_COMM_USER_IRQ_LOST (PSB_COMM_USER_IRQ + 1)
+#define PSB_COMM_FW (2048 >> 2)
+
+#define PSB_UIRQ_VISTEST	       1
+#define PSB_UIRQ_OOM_REPLY	       2
+#define PSB_UIRQ_FIRE_TA_REPLY	       3
+#define PSB_UIRQ_FIRE_RASTER_REPLY     4
+
+#define PSB_2D_SIZE (256*1024*1024)
+#define PSB_MAX_RELOC_PAGES 1024
+
+#define PSB_LOW_REG_OFFS 0x0204
+#define PSB_HIGH_REG_OFFS 0x0600
+
+#define PSB_NUM_VBLANKS 2
+
+
+#define PSB_2D_SIZE (256*1024*1024)
+#define PSB_MAX_RELOC_PAGES 1024
+
+#define PSB_LOW_REG_OFFS 0x0204
+#define PSB_HIGH_REG_OFFS 0x0600
+
+#define PSB_NUM_VBLANKS 2
+#define PSB_WATCHDOG_DELAY (DRM_HZ * 2)
+#define PSB_LID_DELAY (DRM_HZ / 10)
+
+#define MDFLD_PNW_B0 0x04
+#define MDFLD_PNW_C0 0x08
+
+#define MDFLD_DSR_2D_3D_0 	(1 << 0)
+#define MDFLD_DSR_2D_3D_2 	(1 << 1)
+#define MDFLD_DSR_CURSOR_0 	(1 << 2)
+#define MDFLD_DSR_CURSOR_2	(1 << 3)
+#define MDFLD_DSR_OVERLAY_0 	(1 << 4)
+#define MDFLD_DSR_OVERLAY_2 	(1 << 5)
+#define MDFLD_DSR_MIPI_CONTROL	(1 << 6)
+#define MDFLD_DSR_DAMAGE_MASK_0	((1 << 0) | (1 << 2) | (1 << 4))
+#define MDFLD_DSR_DAMAGE_MASK_2	((1 << 1) | (1 << 3) | (1 << 5))
+#define MDFLD_DSR_2D_3D 	(MDFLD_DSR_2D_3D_0 | MDFLD_DSR_2D_3D_2)
+
+#define MDFLD_DSR_RR		45
+#define MDFLD_DPU_ENABLE 	(1 << 31)
+#define MDFLD_DSR_FULLSCREEN 	(1 << 30)
+#define MDFLD_DSR_DELAY		(DRM_HZ / MDFLD_DSR_RR)
+
+#define PSB_PWR_STATE_ON		1
+#define PSB_PWR_STATE_OFF		2
+
+#define PSB_PMPOLICY_NOPM		0
+#define PSB_PMPOLICY_CLOCKGATING	1
+#define PSB_PMPOLICY_POWERDOWN		2
+
+#define PSB_PMSTATE_POWERUP		0
+#define PSB_PMSTATE_CLOCKGATED		1
+#define PSB_PMSTATE_POWERDOWN		2
+#define PSB_PCIx_MSI_ADDR_LOC		0x94
+#define PSB_PCIx_MSI_DATA_LOC		0x98
+
+/* Medfield crystal settings */
+#define KSEL_CRYSTAL_19 1
+#define KSEL_BYPASS_19 5
+#define KSEL_BYPASS_25 6
+#define KSEL_BYPASS_83_100 7
+
+struct opregion_header;
+struct opregion_acpi;
+struct opregion_swsci;
+struct opregion_asle;
+
+struct psb_intel_opregion {
+	struct opregion_header *header;
+	struct opregion_acpi *acpi;
+	struct opregion_swsci *swsci;
+	struct opregion_asle *asle;
+	int enabled;
+};
+
+struct psb_ops;
+
+struct drm_psb_private {
+	struct drm_device *dev;
+	const struct psb_ops *ops;
+
+	struct psb_gtt gtt;
+
+	/* GTT Memory manager */
+	struct psb_gtt_mm *gtt_mm;
+	struct page *scratch_page;
+	u32 *gtt_map;
+	uint32_t stolen_base;
+	void *vram_addr;
+	unsigned long vram_stolen_size;
+	int gtt_initialized;
+	u16 gmch_ctrl;		/* Saved GTT setup */
+	u32 pge_ctl;
+
+	struct mutex gtt_mutex;
+	struct resource *gtt_mem;	/* Our PCI resource */
+
+	struct psb_mmu_driver *mmu;
+	struct psb_mmu_pd *pf_pd;
+
+	/*
+	 * Register base
+	 */
+
+	uint8_t *sgx_reg;
+	uint8_t *vdc_reg;
+	uint32_t gatt_free_offset;
+
+	/*
+	 * Fencing / irq.
+	 */
+
+	uint32_t vdc_irq_mask;
+	uint32_t pipestat[PSB_NUM_PIPE];
+
+	spinlock_t irqmask_lock;
+
+	/*
+	 * Power
+	 */
+
+	bool suspended;
+	bool display_power;
+	int display_count;
+
+	/*
+	 * Modesetting
+	 */
+	struct psb_intel_mode_device mode_dev;
+
+	struct drm_crtc *plane_to_crtc_mapping[PSB_NUM_PIPE];
+	struct drm_crtc *pipe_to_crtc_mapping[PSB_NUM_PIPE];
+	uint32_t num_pipe;
+
+	/*
+	 * OSPM info (Power management base) (can go ?)
+	 */
+	uint32_t ospm_base;
+
+	/*
+	 * Sizes info
+	 */
+
+	struct drm_psb_sizes_arg sizes;
+
+	u32 fuse_reg_value;
+	u32 video_device_fuse;
+
+	/* PCI revision ID for B0:D2:F0 */
+	uint8_t platform_rev_id;
+
+	/*
+	 * LVDS info
+	 */
+	int backlight_duty_cycle;	/* restore backlight to this value */
+	bool panel_wants_dither;
+	struct drm_display_mode *panel_fixed_mode;
+	struct drm_display_mode *lfp_lvds_vbt_mode;
+	struct drm_display_mode *sdvo_lvds_vbt_mode;
+
+	struct bdb_lvds_backlight *lvds_bl; /* LVDS backlight info from VBT */
+	struct psb_intel_i2c_chan *lvds_i2c_bus;
+
+	/* Feature bits from the VBIOS */
+	unsigned int int_tv_support:1;
+	unsigned int lvds_dither:1;
+	unsigned int lvds_vbt:1;
+	unsigned int int_crt_support:1;
+	unsigned int lvds_use_ssc:1;
+	int lvds_ssc_freq;
+	bool is_lvds_on;
+	bool is_mipi_on;
+	u32 mipi_ctrl_display;
+
+	unsigned int core_freq;
+	uint32_t iLVDS_enable;
+
+	/* Runtime PM state */
+	int rpm_enabled;
+
+	/* MID specific */
+	struct oaktrail_vbt vbt_data;
+	struct oaktrail_gct_data gct_data;
+
+	/* MIPI Panel type etc */
+	int panel_id;
+	bool dual_mipi;		/* dual display - DPI & DBI */
+	bool dpi_panel_on;	/* The DPI panel power is on */
+	bool dpi_panel_on2;	/* The DPI panel power is on */
+	bool dbi_panel_on;	/* The DBI panel power is on */
+	bool dbi_panel_on2;	/* The DBI panel power is on */
+	u32 dsr_fb_update;	/* DSR FB update counter */
+
+	/* Moorestown HDMI state */
+	struct oaktrail_hdmi_dev *hdmi_priv;
+
+	/* Moorestown pipe config register value cache */
+	uint32_t pipeconf;
+	uint32_t pipeconf1;
+	uint32_t pipeconf2;
+
+	/* Moorestown plane control register value cache */
+	uint32_t dspcntr;
+	uint32_t dspcntr1;
+	uint32_t dspcntr2;
+
+	/* Moorestown MM backlight cache */
+	uint8_t saveBKLTCNT;
+	uint8_t saveBKLTREQ;
+	uint8_t saveBKLTBRTL;
+
+	/*
+	 * Register state
+	 */
+	uint32_t saveDSPACNTR;
+	uint32_t saveDSPBCNTR;
+	uint32_t savePIPEACONF;
+	uint32_t savePIPEBCONF;
+	uint32_t savePIPEASRC;
+	uint32_t savePIPEBSRC;
+	uint32_t saveFPA0;
+	uint32_t saveFPA1;
+	uint32_t saveDPLL_A;
+	uint32_t saveDPLL_A_MD;
+	uint32_t saveHTOTAL_A;
+	uint32_t saveHBLANK_A;
+	uint32_t saveHSYNC_A;
+	uint32_t saveVTOTAL_A;
+	uint32_t saveVBLANK_A;
+	uint32_t saveVSYNC_A;
+	uint32_t saveDSPASTRIDE;
+	uint32_t saveDSPASIZE;
+	uint32_t saveDSPAPOS;
+	uint32_t saveDSPABASE;
+	uint32_t saveDSPASURF;
+	uint32_t saveDSPASTATUS;
+	uint32_t saveFPB0;
+	uint32_t saveFPB1;
+	uint32_t saveDPLL_B;
+	uint32_t saveDPLL_B_MD;
+	uint32_t saveHTOTAL_B;
+	uint32_t saveHBLANK_B;
+	uint32_t saveHSYNC_B;
+	uint32_t saveVTOTAL_B;
+	uint32_t saveVBLANK_B;
+	uint32_t saveVSYNC_B;
+	uint32_t saveDSPBSTRIDE;
+	uint32_t saveDSPBSIZE;
+	uint32_t saveDSPBPOS;
+	uint32_t saveDSPBBASE;
+	uint32_t saveDSPBSURF;
+	uint32_t saveDSPBSTATUS;
+	uint32_t saveVCLK_DIVISOR_VGA0;
+	uint32_t saveVCLK_DIVISOR_VGA1;
+	uint32_t saveVCLK_POST_DIV;
+	uint32_t saveVGACNTRL;
+	uint32_t saveADPA;
+	uint32_t saveLVDS;
+	uint32_t saveDVOA;
+	uint32_t saveDVOB;
+	uint32_t saveDVOC;
+	uint32_t savePP_ON;
+	uint32_t savePP_OFF;
+	uint32_t savePP_CONTROL;
+	uint32_t savePP_CYCLE;
+	uint32_t savePFIT_CONTROL;
+	uint32_t savePaletteA[256];
+	uint32_t savePaletteB[256];
+	uint32_t saveBLC_PWM_CTL2;
+	uint32_t saveBLC_PWM_CTL;
+	uint32_t saveCLOCKGATING;
+	uint32_t saveDSPARB;
+	uint32_t saveDSPATILEOFF;
+	uint32_t saveDSPBTILEOFF;
+	uint32_t saveDSPAADDR;
+	uint32_t saveDSPBADDR;
+	uint32_t savePFIT_AUTO_RATIOS;
+	uint32_t savePFIT_PGM_RATIOS;
+	uint32_t savePP_ON_DELAYS;
+	uint32_t savePP_OFF_DELAYS;
+	uint32_t savePP_DIVISOR;
+	uint32_t saveBSM;
+	uint32_t saveVBT;
+	uint32_t saveBCLRPAT_A;
+	uint32_t saveBCLRPAT_B;
+	uint32_t saveDSPALINOFF;
+	uint32_t saveDSPBLINOFF;
+	uint32_t savePERF_MODE;
+	uint32_t saveDSPFW1;
+	uint32_t saveDSPFW2;
+	uint32_t saveDSPFW3;
+	uint32_t saveDSPFW4;
+	uint32_t saveDSPFW5;
+	uint32_t saveDSPFW6;
+	uint32_t saveCHICKENBIT;
+	uint32_t saveDSPACURSOR_CTRL;
+	uint32_t saveDSPBCURSOR_CTRL;
+	uint32_t saveDSPACURSOR_BASE;
+	uint32_t saveDSPBCURSOR_BASE;
+	uint32_t saveDSPACURSOR_POS;
+	uint32_t saveDSPBCURSOR_POS;
+	uint32_t save_palette_a[256];
+	uint32_t save_palette_b[256];
+	uint32_t saveOV_OVADD;
+	uint32_t saveOV_OGAMC0;
+	uint32_t saveOV_OGAMC1;
+	uint32_t saveOV_OGAMC2;
+	uint32_t saveOV_OGAMC3;
+	uint32_t saveOV_OGAMC4;
+	uint32_t saveOV_OGAMC5;
+	uint32_t saveOVC_OVADD;
+	uint32_t saveOVC_OGAMC0;
+	uint32_t saveOVC_OGAMC1;
+	uint32_t saveOVC_OGAMC2;
+	uint32_t saveOVC_OGAMC3;
+	uint32_t saveOVC_OGAMC4;
+	uint32_t saveOVC_OGAMC5;
+
+	/* MSI reg save */
+	uint32_t msi_addr;
+	uint32_t msi_data;
+
+	/* Medfield specific register save state */
+	uint32_t saveHDMIPHYMISCCTL;
+	uint32_t saveHDMIB_CONTROL;
+	uint32_t saveDSPCCNTR;
+	uint32_t savePIPECCONF;
+	uint32_t savePIPECSRC;
+	uint32_t saveHTOTAL_C;
+	uint32_t saveHBLANK_C;
+	uint32_t saveHSYNC_C;
+	uint32_t saveVTOTAL_C;
+	uint32_t saveVBLANK_C;
+	uint32_t saveVSYNC_C;
+	uint32_t saveDSPCSTRIDE;
+	uint32_t saveDSPCSIZE;
+	uint32_t saveDSPCPOS;
+	uint32_t saveDSPCSURF;
+	uint32_t saveDSPCSTATUS;
+	uint32_t saveDSPCLINOFF;
+	uint32_t saveDSPCTILEOFF;
+	uint32_t saveDSPCCURSOR_CTRL;
+	uint32_t saveDSPCCURSOR_BASE;
+	uint32_t saveDSPCCURSOR_POS;
+	uint32_t save_palette_c[256];
+	uint32_t saveOV_OVADD_C;
+	uint32_t saveOV_OGAMC0_C;
+	uint32_t saveOV_OGAMC1_C;
+	uint32_t saveOV_OGAMC2_C;
+	uint32_t saveOV_OGAMC3_C;
+	uint32_t saveOV_OGAMC4_C;
+	uint32_t saveOV_OGAMC5_C;
+
+	/* DSI register save */
+	uint32_t saveDEVICE_READY_REG;
+	uint32_t saveINTR_EN_REG;
+	uint32_t saveDSI_FUNC_PRG_REG;
+	uint32_t saveHS_TX_TIMEOUT_REG;
+	uint32_t saveLP_RX_TIMEOUT_REG;
+	uint32_t saveTURN_AROUND_TIMEOUT_REG;
+	uint32_t saveDEVICE_RESET_REG;
+	uint32_t saveDPI_RESOLUTION_REG;
+	uint32_t saveHORIZ_SYNC_PAD_COUNT_REG;
+	uint32_t saveHORIZ_BACK_PORCH_COUNT_REG;
+	uint32_t saveHORIZ_FRONT_PORCH_COUNT_REG;
+	uint32_t saveHORIZ_ACTIVE_AREA_COUNT_REG;
+	uint32_t saveVERT_SYNC_PAD_COUNT_REG;
+	uint32_t saveVERT_BACK_PORCH_COUNT_REG;
+	uint32_t saveVERT_FRONT_PORCH_COUNT_REG;
+	uint32_t saveHIGH_LOW_SWITCH_COUNT_REG;
+	uint32_t saveINIT_COUNT_REG;
+	uint32_t saveMAX_RET_PAK_REG;
+	uint32_t saveVIDEO_FMT_REG;
+	uint32_t saveEOT_DISABLE_REG;
+	uint32_t saveLP_BYTECLK_REG;
+	uint32_t saveHS_LS_DBI_ENABLE_REG;
+	uint32_t saveTXCLKESC_REG;
+	uint32_t saveDPHY_PARAM_REG;
+	uint32_t saveMIPI_CONTROL_REG;
+	uint32_t saveMIPI;
+	uint32_t saveMIPI_C;
+
+	/* DPST register save */
+	uint32_t saveHISTOGRAM_INT_CONTROL_REG;
+	uint32_t saveHISTOGRAM_LOGIC_CONTROL_REG;
+	uint32_t savePWM_CONTROL_LOGIC;
+
+	/*
+	 * DSI info. 
+	 */
+	void * dbi_dsr_info;	
+	void * dbi_dpu_info;
+	void * dsi_configs[2];
+	/*
+	 * LID-Switch
+	 */
+	spinlock_t lid_lock;
+	struct timer_list lid_timer;
+	struct psb_intel_opregion opregion;
+	u32 *lid_state;
+	u32 lid_last_state;
+
+	/*
+	 * Watchdog
+	 */
+
+	uint32_t apm_reg;
+	uint16_t apm_base;
+
+	/*
+	 * Used for modifying backlight from
+	 * xrandr -- consider removing and using HAL instead
+	 */
+	struct backlight_device *backlight_device;
+	struct drm_property *backlight_property;
+	uint32_t blc_adj1;
+	uint32_t blc_adj2;
+
+	void *fbdev;
+
+	/* 2D acceleration */
+	struct mutex mutex_2d;
+};
+
+
+/*
+ *	Operations for each board type
+ */
+ 
+struct psb_ops {
+	const char *name;
+	unsigned int accel_2d:1;
+	int pipes;		/* Number of output pipes */
+	int crtcs;		/* Number of CRTCs */
+	int sgx_offset;		/* Base offset of SGX device */
+
+	/* Sub functions */
+	struct drm_crtc_helper_funcs const *crtc_helper;
+	struct drm_crtc_funcs const *crtc_funcs;
+
+	/* Setup hooks */
+	int (*chip_setup)(struct drm_device *dev);
+	void (*chip_teardown)(struct drm_device *dev);
+
+	/* Display management hooks */
+	int (*output_init)(struct drm_device *dev);
+	/* Power management hooks */
+	void (*init_pm)(struct drm_device *dev);
+	int (*save_regs)(struct drm_device *dev);
+	int (*restore_regs)(struct drm_device *dev);
+	int (*power_up)(struct drm_device *dev);
+	int (*power_down)(struct drm_device *dev);
+
+	void (*lvds_bl_power)(struct drm_device *dev, bool on);
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+	/* Backlight */
+	int (*backlight_init)(struct drm_device *dev);
+#endif
+	int i2c_bus;		/* I2C bus identifier for Moorestown */
+};
+
+
+
+struct psb_mmu_driver;
+
+extern int drm_crtc_probe_output_modes(struct drm_device *dev, int, int);
+extern int drm_pick_crtcs(struct drm_device *dev);
+
+static inline struct drm_psb_private *psb_priv(struct drm_device *dev)
+{
+	return (struct drm_psb_private *) dev->dev_private;
+}
+
+/*
+ * MMU stuff.
+ */
+
+extern struct psb_mmu_driver *psb_mmu_driver_init(uint8_t __iomem * registers,
+					int trap_pagefaults,
+					int invalid_type,
+					struct drm_psb_private *dev_priv);
+extern void psb_mmu_driver_takedown(struct psb_mmu_driver *driver);
+extern struct psb_mmu_pd *psb_mmu_get_default_pd(struct psb_mmu_driver
+						 *driver);
+extern void psb_mmu_mirror_gtt(struct psb_mmu_pd *pd, uint32_t mmu_offset,
+			       uint32_t gtt_start, uint32_t gtt_pages);
+extern struct psb_mmu_pd *psb_mmu_alloc_pd(struct psb_mmu_driver *driver,
+					   int trap_pagefaults,
+					   int invalid_type);
+extern void psb_mmu_free_pagedir(struct psb_mmu_pd *pd);
+extern void psb_mmu_flush(struct psb_mmu_driver *driver, int rc_prot);
+extern void psb_mmu_remove_pfn_sequence(struct psb_mmu_pd *pd,
+					unsigned long address,
+					uint32_t num_pages);
+extern int psb_mmu_insert_pfn_sequence(struct psb_mmu_pd *pd,
+				       uint32_t start_pfn,
+				       unsigned long address,
+				       uint32_t num_pages, int type);
+extern int psb_mmu_virtual_to_pfn(struct psb_mmu_pd *pd, uint32_t virtual,
+				  unsigned long *pfn);
+
+/*
+ * Enable / disable MMU for different requestors.
+ */
+
+
+extern void psb_mmu_set_pd_context(struct psb_mmu_pd *pd, int hw_context);
+extern int psb_mmu_insert_pages(struct psb_mmu_pd *pd, struct page **pages,
+				unsigned long address, uint32_t num_pages,
+				uint32_t desired_tile_stride,
+				uint32_t hw_tile_stride, int type);
+extern void psb_mmu_remove_pages(struct psb_mmu_pd *pd,
+				 unsigned long address, uint32_t num_pages,
+				 uint32_t desired_tile_stride,
+				 uint32_t hw_tile_stride);
+/*
+ *psb_irq.c
+ */
+
+extern irqreturn_t psb_irq_handler(DRM_IRQ_ARGS);
+extern int psb_irq_enable_dpst(struct drm_device *dev);
+extern int psb_irq_disable_dpst(struct drm_device *dev);
+extern void psb_irq_preinstall(struct drm_device *dev);
+extern int psb_irq_postinstall(struct drm_device *dev);
+extern void psb_irq_uninstall(struct drm_device *dev);
+extern void psb_irq_turn_on_dpst(struct drm_device *dev);
+extern void psb_irq_turn_off_dpst(struct drm_device *dev);
+
+extern void psb_irq_uninstall_islands(struct drm_device *dev, int hw_islands);
+extern int psb_vblank_wait2(struct drm_device *dev, unsigned int *sequence);
+extern int psb_vblank_wait(struct drm_device *dev, unsigned int *sequence);
+extern int psb_enable_vblank(struct drm_device *dev, int crtc);
+extern void psb_disable_vblank(struct drm_device *dev, int crtc);
+void
+psb_enable_pipestat(struct drm_psb_private *dev_priv, int pipe, u32 mask);
+
+void
+psb_disable_pipestat(struct drm_psb_private *dev_priv, int pipe, u32 mask);
+
+extern u32 psb_get_vblank_counter(struct drm_device *dev, int crtc);
+
+/*
+ * intel_opregion.c
+ */
+extern int gma_intel_opregion_init(struct drm_device *dev);
+extern int gma_intel_opregion_exit(struct drm_device *dev);
+
+/*
+ * framebuffer.c
+ */
+extern int psbfb_probed(struct drm_device *dev);
+extern int psbfb_remove(struct drm_device *dev,
+			struct drm_framebuffer *fb);
+/*
+ * accel_2d.c
+ */
+extern void psbfb_copyarea(struct fb_info *info,
+					const struct fb_copyarea *region);
+extern int psbfb_sync(struct fb_info *info);
+extern void psb_spank(struct drm_psb_private *dev_priv);
+
+/*
+ * psb_reset.c
+ */
+
+extern void psb_lid_timer_init(struct drm_psb_private *dev_priv);
+extern void psb_lid_timer_takedown(struct drm_psb_private *dev_priv);
+extern void psb_print_pagefault(struct drm_psb_private *dev_priv);
+
+/* modesetting */
+extern void psb_modeset_init(struct drm_device *dev);
+extern void psb_modeset_cleanup(struct drm_device *dev);
+extern int psb_fbdev_init(struct drm_device *dev);
+
+/* backlight.c */
+int gma_backlight_init(struct drm_device *dev);
+void gma_backlight_exit(struct drm_device *dev);
+
+/* oaktrail_crtc.c */
+extern const struct drm_crtc_helper_funcs oaktrail_helper_funcs;
+
+/* oaktrail_lvds.c */
+extern void oaktrail_lvds_init(struct drm_device *dev,
+		    struct psb_intel_mode_device *mode_dev);
+
+/* psb_intel_display.c */
+extern const struct drm_crtc_helper_funcs psb_intel_helper_funcs;
+extern const struct drm_crtc_funcs psb_intel_crtc_funcs;
+
+/* psb_intel_lvds.c */
+extern const struct drm_connector_helper_funcs
+					psb_intel_lvds_connector_helper_funcs;
+extern const struct drm_connector_funcs psb_intel_lvds_connector_funcs;
+
+/* gem.c */
+extern int psb_gem_init_object(struct drm_gem_object *obj);
+extern void psb_gem_free_object(struct drm_gem_object *obj);
+extern int psb_gem_get_aperture(struct drm_device *dev, void *data,
+			struct drm_file *file);
+extern int psb_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
+			struct drm_mode_create_dumb *args);
+extern int psb_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev,
+			uint32_t handle);
+extern int psb_gem_dumb_map_gtt(struct drm_file *file, struct drm_device *dev,
+			uint32_t handle, uint64_t *offset);
+extern int psb_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
+extern int psb_gem_create_ioctl(struct drm_device *dev, void *data,
+			struct drm_file *file);
+extern int psb_gem_mmap_ioctl(struct drm_device *dev, void *data,
+					struct drm_file *file);
+
+/* psb_device.c */
+extern const struct psb_ops psb_chip_ops;
+
+/* oaktrail_device.c */
+extern const struct psb_ops oaktrail_chip_ops;
+
+/* cdv_device.c */
+extern const struct psb_ops cdv_chip_ops;
+
+/*
+ * Debug print bits setting
+ */
+#define PSB_D_GENERAL (1 << 0)
+#define PSB_D_INIT    (1 << 1)
+#define PSB_D_IRQ     (1 << 2)
+#define PSB_D_ENTRY   (1 << 3)
+/* debug the get H/V BP/FP count */
+#define PSB_D_HV      (1 << 4)
+#define PSB_D_DBI_BF  (1 << 5)
+#define PSB_D_PM      (1 << 6)
+#define PSB_D_RENDER  (1 << 7)
+#define PSB_D_REG     (1 << 8)
+#define PSB_D_MSVDX   (1 << 9)
+#define PSB_D_TOPAZ   (1 << 10)
+
+extern int drm_psb_no_fb;
+extern int drm_idle_check_interval;
+
+/*
+ *	Utilities
+ */
+
+static inline u32 MRST_MSG_READ32(uint port, uint offset)
+{
+	int mcr = (0xD0<<24) | (port << 16) | (offset << 8);
+	uint32_t ret_val = 0;
+	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+	pci_write_config_dword(pci_root, 0xD0, mcr);
+	pci_read_config_dword(pci_root, 0xD4, &ret_val);
+	pci_dev_put(pci_root);
+	return ret_val;
+}
+static inline void MRST_MSG_WRITE32(uint port, uint offset, u32 value)
+{
+	int mcr = (0xE0<<24) | (port << 16) | (offset << 8) | 0xF0;
+	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+	pci_write_config_dword(pci_root, 0xD4, value);
+	pci_write_config_dword(pci_root, 0xD0, mcr);
+	pci_dev_put(pci_root);
+}
+static inline u32 MDFLD_MSG_READ32(uint port, uint offset)
+{
+	int mcr = (0x10<<24) | (port << 16) | (offset << 8);
+	uint32_t ret_val = 0;
+	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+	pci_write_config_dword(pci_root, 0xD0, mcr);
+	pci_read_config_dword(pci_root, 0xD4, &ret_val);
+	pci_dev_put(pci_root);
+	return ret_val;
+}
+static inline void MDFLD_MSG_WRITE32(uint port, uint offset, u32 value)
+{
+	int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0;
+	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+	pci_write_config_dword(pci_root, 0xD4, value);
+	pci_write_config_dword(pci_root, 0xD0, mcr);
+	pci_dev_put(pci_root);
+}
+
+static inline uint32_t REGISTER_READ(struct drm_device *dev, uint32_t reg)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	return ioread32(dev_priv->vdc_reg + reg);
+}
+
+#define REG_READ(reg)	       REGISTER_READ(dev, (reg))
+
+static inline void REGISTER_WRITE(struct drm_device *dev, uint32_t reg,
+				      uint32_t val)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	iowrite32((val), dev_priv->vdc_reg + (reg));
+}
+
+#define REG_WRITE(reg, val)	REGISTER_WRITE(dev, (reg), (val))
+
+static inline void REGISTER_WRITE16(struct drm_device *dev,
+					uint32_t reg, uint32_t val)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	iowrite16((val), dev_priv->vdc_reg + (reg));
+}
+
+#define REG_WRITE16(reg, val)	  REGISTER_WRITE16(dev, (reg), (val))
+
+static inline void REGISTER_WRITE8(struct drm_device *dev,
+				       uint32_t reg, uint32_t val)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	iowrite8((val), dev_priv->vdc_reg + (reg));
+}
+
+#define REG_WRITE8(reg, val)		REGISTER_WRITE8(dev, (reg), (val))
+
+#define PSB_WVDC32(_val, _offs)		iowrite32(_val, dev_priv->vdc_reg + (_offs))
+#define PSB_RVDC32(_offs)		ioread32(dev_priv->vdc_reg + (_offs))
+
+/* #define TRAP_SGX_PM_FAULT 1 */
+#ifdef TRAP_SGX_PM_FAULT
+#define PSB_RSGX32(_offs)						\
+({									\
+	if (inl(dev_priv->apm_base + PSB_APM_STS) & 0x3) {		\
+		printk(KERN_ERR						\
+			"access sgx when it's off!! (READ) %s, %d\n",	\
+	       __FILE__, __LINE__);					\
+		melay(1000);						\
+	}								\
+	ioread32(dev_priv->sgx_reg + (_offs));				\
+})
+#else
+#define PSB_RSGX32(_offs)		ioread32(dev_priv->sgx_reg + (_offs))
+#endif
+#define PSB_WSGX32(_val, _offs)		iowrite32(_val, dev_priv->sgx_reg + (_offs))
+
+#define MSVDX_REG_DUMP 0
+
+#define PSB_WMSVDX32(_val, _offs)	iowrite32(_val, dev_priv->msvdx_reg + (_offs))
+#define PSB_RMSVDX32(_offs)		ioread32(dev_priv->msvdx_reg + (_offs))
+
+#endif
diff --git a/drivers/gpu/drm/gma500/psb_irq.c b/drivers/gpu/drm/gma500/psb_irq.c
new file mode 100644
index 0000000..2d95458
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_irq.c
@@ -0,0 +1,553 @@
+/**************************************************************************
+ * Copyright (c) 2007, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
+ * develop this driver.
+ *
+ **************************************************************************/
+/*
+ */
+
+#include <drm/drmP.h>
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+#include "power.h"
+
+/*
+ * inline functions
+ */
+
+static inline u32
+psb_pipestat(int pipe)
+{
+	if (pipe == 0)
+		return PIPEASTAT;
+	if (pipe == 1)
+		return PIPEBSTAT;
+	if (pipe == 2)
+		return PIPECSTAT;
+	BUG();
+}
+
+static inline u32
+mid_pipe_event(int pipe)
+{
+	if (pipe == 0)
+		return _PSB_PIPEA_EVENT_FLAG;
+	if (pipe == 1)
+		return _MDFLD_PIPEB_EVENT_FLAG;
+	if (pipe == 2)
+		return _MDFLD_PIPEC_EVENT_FLAG;
+	BUG();
+}
+
+static inline u32
+mid_pipe_vsync(int pipe)
+{
+	if (pipe == 0)
+		return _PSB_VSYNC_PIPEA_FLAG;
+	if (pipe == 1)
+		return _PSB_VSYNC_PIPEB_FLAG;
+	if (pipe == 2)
+		return _MDFLD_PIPEC_VBLANK_FLAG;
+	BUG();
+}
+
+static inline u32
+mid_pipeconf(int pipe)
+{
+	if (pipe == 0)
+		return PIPEACONF;
+	if (pipe == 1)
+		return PIPEBCONF;
+	if (pipe == 2)
+		return PIPECCONF;
+	BUG();
+}
+
+void
+psb_enable_pipestat(struct drm_psb_private *dev_priv, int pipe, u32 mask)
+{
+	if ((dev_priv->pipestat[pipe] & mask) != mask) {
+		u32 reg = psb_pipestat(pipe);
+		dev_priv->pipestat[pipe] |= mask;
+		/* Enable the interrupt, clear any pending status */
+		if (gma_power_begin(dev_priv->dev, false)) {
+			u32 writeVal = PSB_RVDC32(reg);
+			writeVal |= (mask | (mask >> 16));
+			PSB_WVDC32(writeVal, reg);
+			(void) PSB_RVDC32(reg);
+			gma_power_end(dev_priv->dev);
+		}
+	}
+}
+
+void
+psb_disable_pipestat(struct drm_psb_private *dev_priv, int pipe, u32 mask)
+{
+	if ((dev_priv->pipestat[pipe] & mask) != 0) {
+		u32 reg = psb_pipestat(pipe);
+		dev_priv->pipestat[pipe] &= ~mask;
+		if (gma_power_begin(dev_priv->dev, false)) {
+			u32 writeVal = PSB_RVDC32(reg);
+			writeVal &= ~mask;
+			PSB_WVDC32(writeVal, reg);
+			(void) PSB_RVDC32(reg);
+			gma_power_end(dev_priv->dev);
+		}
+	}
+}
+
+void mid_enable_pipe_event(struct drm_psb_private *dev_priv, int pipe)
+{
+	if (gma_power_begin(dev_priv->dev, false)) {
+		u32 pipe_event = mid_pipe_event(pipe);
+		dev_priv->vdc_irq_mask |= pipe_event;
+		PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R);
+		PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R);
+		gma_power_end(dev_priv->dev);
+	}
+}
+
+void mid_disable_pipe_event(struct drm_psb_private *dev_priv, int pipe)
+{
+	if (dev_priv->pipestat[pipe] == 0) {
+		if (gma_power_begin(dev_priv->dev, false)) {
+			u32 pipe_event = mid_pipe_event(pipe);
+			dev_priv->vdc_irq_mask &= ~pipe_event;
+			PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R);
+			PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R);
+			gma_power_end(dev_priv->dev);
+		}
+	}
+}
+
+/**
+ * Display controller interrupt handler for vsync/vblank.
+ *
+ */
+static void mid_vblank_handler(struct drm_device *dev, uint32_t pipe)
+{
+	drm_handle_vblank(dev, pipe);
+}
+
+
+/**
+ * Display controller interrupt handler for pipe event.
+ *
+ */
+#define WAIT_STATUS_CLEAR_LOOP_COUNT 0xffff
+static void mid_pipe_event_handler(struct drm_device *dev, uint32_t pipe)
+{
+	struct drm_psb_private *dev_priv =
+	    (struct drm_psb_private *) dev->dev_private;
+
+	uint32_t pipe_stat_val = 0;
+	uint32_t pipe_stat_reg = psb_pipestat(pipe);
+	uint32_t pipe_enable = dev_priv->pipestat[pipe];
+	uint32_t pipe_status = dev_priv->pipestat[pipe] >> 16;
+	uint32_t i = 0;
+
+	spin_lock(&dev_priv->irqmask_lock);
+
+	pipe_stat_val = PSB_RVDC32(pipe_stat_reg);
+	pipe_stat_val &= pipe_enable | pipe_status;
+	pipe_stat_val &= pipe_stat_val >> 16;
+
+	spin_unlock(&dev_priv->irqmask_lock);
+
+	/* clear the 2nd level interrupt status bits */
+	/**
+	* FIXME: shouldn't use while loop here. However, the interrupt
+	* status 'sticky' bits cannot be cleared by setting '1' to that
+	* bit once...
+	*/
+	for (i = 0; i < WAIT_STATUS_CLEAR_LOOP_COUNT; i++) {
+		PSB_WVDC32(PSB_RVDC32(pipe_stat_reg), pipe_stat_reg);
+		(void) PSB_RVDC32(pipe_stat_reg);
+
+		if ((PSB_RVDC32(pipe_stat_reg) & pipe_status) == 0)
+			break;
+	}
+
+	if (i == WAIT_STATUS_CLEAR_LOOP_COUNT)
+		dev_err(dev->dev,
+	"%s, can't clear the status bits in pipe_stat_reg, its value = 0x%x.\n",
+			__func__, PSB_RVDC32(pipe_stat_reg));
+
+	if (pipe_stat_val & PIPE_VBLANK_STATUS)
+		mid_vblank_handler(dev, pipe);
+
+	if (pipe_stat_val & PIPE_TE_STATUS)
+		drm_handle_vblank(dev, pipe);
+}
+
+/*
+ * Display controller interrupt handler.
+ */
+static void psb_vdc_interrupt(struct drm_device *dev, uint32_t vdc_stat)
+{
+	if (vdc_stat & _PSB_PIPEA_EVENT_FLAG)
+		mid_pipe_event_handler(dev, 0);
+}
+
+irqreturn_t psb_irq_handler(DRM_IRQ_ARGS)
+{
+	struct drm_device *dev = (struct drm_device *) arg;
+	struct drm_psb_private *dev_priv =
+	    (struct drm_psb_private *) dev->dev_private;
+
+	uint32_t vdc_stat, dsp_int = 0, sgx_int = 0;
+	int handled = 0;
+
+	spin_lock(&dev_priv->irqmask_lock);
+
+	vdc_stat = PSB_RVDC32(PSB_INT_IDENTITY_R);
+
+	if (vdc_stat & _MDFLD_DISP_ALL_IRQ_FLAG)
+		dsp_int = 1;
+
+	if (vdc_stat & _PSB_IRQ_SGX_FLAG)
+		sgx_int = 1;
+
+	vdc_stat &= dev_priv->vdc_irq_mask;
+	spin_unlock(&dev_priv->irqmask_lock);
+
+	if (dsp_int && gma_power_is_on(dev)) {
+		psb_vdc_interrupt(dev, vdc_stat);
+		handled = 1;
+	}
+
+	if (sgx_int) {
+		/* Not expected - we have it masked, shut it up */
+		u32 s, s2;
+		s = PSB_RSGX32(PSB_CR_EVENT_STATUS);
+		s2 = PSB_RSGX32(PSB_CR_EVENT_STATUS2);
+		PSB_WSGX32(s, PSB_CR_EVENT_HOST_CLEAR);
+		PSB_WSGX32(s2, PSB_CR_EVENT_HOST_CLEAR2);
+		/* if s & _PSB_CE_TWOD_COMPLETE we have 2D done but
+		   we may as well poll even if we add that ! */
+		handled = 1;
+	}
+
+	PSB_WVDC32(vdc_stat, PSB_INT_IDENTITY_R);
+	(void) PSB_RVDC32(PSB_INT_IDENTITY_R);
+	DRM_READMEMORYBARRIER();
+
+	if (!handled)
+		return IRQ_NONE;
+
+	return IRQ_HANDLED;
+}
+
+void psb_irq_preinstall(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv =
+	    (struct drm_psb_private *) dev->dev_private;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
+
+	if (gma_power_is_on(dev))
+		PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM);
+	if (dev->vblank_enabled[0])
+		dev_priv->vdc_irq_mask |= _PSB_PIPEA_EVENT_FLAG;
+	if (dev->vblank_enabled[1])
+		dev_priv->vdc_irq_mask |= _MDFLD_PIPEB_EVENT_FLAG;
+	if (dev->vblank_enabled[2])
+		dev_priv->vdc_irq_mask |= _MDFLD_PIPEC_EVENT_FLAG;
+
+	/*This register is safe even if display island is off*/
+	PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R);
+	spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
+}
+
+int psb_irq_postinstall(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv =
+	    (struct drm_psb_private *) dev->dev_private;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
+
+	/* This register is safe even if display island is off */
+	PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R);
+	PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM);
+
+	if (dev->vblank_enabled[0])
+		psb_enable_pipestat(dev_priv, 0, PIPE_VBLANK_INTERRUPT_ENABLE);
+	else
+		psb_disable_pipestat(dev_priv, 0, PIPE_VBLANK_INTERRUPT_ENABLE);
+
+	if (dev->vblank_enabled[1])
+		psb_enable_pipestat(dev_priv, 1, PIPE_VBLANK_INTERRUPT_ENABLE);
+	else
+		psb_disable_pipestat(dev_priv, 1, PIPE_VBLANK_INTERRUPT_ENABLE);
+
+	if (dev->vblank_enabled[2])
+		psb_enable_pipestat(dev_priv, 2, PIPE_VBLANK_INTERRUPT_ENABLE);
+	else
+		psb_disable_pipestat(dev_priv, 2, PIPE_VBLANK_INTERRUPT_ENABLE);
+
+	spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
+	return 0;
+}
+
+void psb_irq_uninstall(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv =
+	    (struct drm_psb_private *) dev->dev_private;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
+
+	PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM);
+
+	if (dev->vblank_enabled[0])
+		psb_disable_pipestat(dev_priv, 0, PIPE_VBLANK_INTERRUPT_ENABLE);
+
+	if (dev->vblank_enabled[1])
+		psb_disable_pipestat(dev_priv, 1, PIPE_VBLANK_INTERRUPT_ENABLE);
+
+	if (dev->vblank_enabled[2])
+		psb_disable_pipestat(dev_priv, 2, PIPE_VBLANK_INTERRUPT_ENABLE);
+
+	dev_priv->vdc_irq_mask &= _PSB_IRQ_SGX_FLAG |
+				  _PSB_IRQ_MSVDX_FLAG |
+				  _LNC_IRQ_TOPAZ_FLAG;
+
+	/* These two registers are safe even if display island is off */
+	PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R);
+	PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R);
+
+	wmb();
+
+	/* This register is safe even if display island is off */
+	PSB_WVDC32(PSB_RVDC32(PSB_INT_IDENTITY_R), PSB_INT_IDENTITY_R);
+	spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
+}
+
+void psb_irq_turn_on_dpst(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv =
+		(struct drm_psb_private *) dev->dev_private;
+	u32 hist_reg;
+	u32 pwm_reg;
+
+	if (gma_power_begin(dev, false)) {
+		PSB_WVDC32(1 << 31, HISTOGRAM_LOGIC_CONTROL);
+		hist_reg = PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL);
+		PSB_WVDC32(1 << 31, HISTOGRAM_INT_CONTROL);
+		hist_reg = PSB_RVDC32(HISTOGRAM_INT_CONTROL);
+
+		PSB_WVDC32(0x80010100, PWM_CONTROL_LOGIC);
+		pwm_reg = PSB_RVDC32(PWM_CONTROL_LOGIC);
+		PSB_WVDC32(pwm_reg | PWM_PHASEIN_ENABLE
+						| PWM_PHASEIN_INT_ENABLE,
+							   PWM_CONTROL_LOGIC);
+		pwm_reg = PSB_RVDC32(PWM_CONTROL_LOGIC);
+
+		psb_enable_pipestat(dev_priv, 0, PIPE_DPST_EVENT_ENABLE);
+
+		hist_reg = PSB_RVDC32(HISTOGRAM_INT_CONTROL);
+		PSB_WVDC32(hist_reg | HISTOGRAM_INT_CTRL_CLEAR,
+							HISTOGRAM_INT_CONTROL);
+		pwm_reg = PSB_RVDC32(PWM_CONTROL_LOGIC);
+		PSB_WVDC32(pwm_reg | 0x80010100 | PWM_PHASEIN_ENABLE,
+							PWM_CONTROL_LOGIC);
+
+		gma_power_end(dev);
+	}
+}
+
+int psb_irq_enable_dpst(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv =
+		(struct drm_psb_private *) dev->dev_private;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
+
+	/* enable DPST */
+	mid_enable_pipe_event(dev_priv, 0);
+	psb_irq_turn_on_dpst(dev);
+
+	spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
+	return 0;
+}
+
+void psb_irq_turn_off_dpst(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv =
+	    (struct drm_psb_private *) dev->dev_private;
+	u32 hist_reg;
+	u32 pwm_reg;
+
+	if (gma_power_begin(dev, false)) {
+		PSB_WVDC32(0x00000000, HISTOGRAM_INT_CONTROL);
+		hist_reg = PSB_RVDC32(HISTOGRAM_INT_CONTROL);
+
+		psb_disable_pipestat(dev_priv, 0, PIPE_DPST_EVENT_ENABLE);
+
+		pwm_reg = PSB_RVDC32(PWM_CONTROL_LOGIC);
+		PSB_WVDC32(pwm_reg & !(PWM_PHASEIN_INT_ENABLE),
+							PWM_CONTROL_LOGIC);
+		pwm_reg = PSB_RVDC32(PWM_CONTROL_LOGIC);
+
+		gma_power_end(dev);
+	}
+}
+
+int psb_irq_disable_dpst(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv =
+	    (struct drm_psb_private *) dev->dev_private;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
+
+	mid_disable_pipe_event(dev_priv, 0);
+	psb_irq_turn_off_dpst(dev);
+
+	spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
+
+	return 0;
+}
+
+#ifdef PSB_FIXME
+static int psb_vblank_do_wait(struct drm_device *dev,
+			      unsigned int *sequence, atomic_t *counter)
+{
+	unsigned int cur_vblank;
+	int ret = 0;
+	DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ,
+		    (((cur_vblank = atomic_read(counter))
+		      - *sequence) <= (1 << 23)));
+	*sequence = cur_vblank;
+
+	return ret;
+}
+#endif
+
+/*
+ * It is used to enable VBLANK interrupt
+ */
+int psb_enable_vblank(struct drm_device *dev, int pipe)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	unsigned long irqflags;
+	uint32_t reg_val = 0;
+	uint32_t pipeconf_reg = mid_pipeconf(pipe);
+
+	if (gma_power_begin(dev, false)) {
+		reg_val = REG_READ(pipeconf_reg);
+		gma_power_end(dev);
+	}
+
+	if (!(reg_val & PIPEACONF_ENABLE))
+		return -EINVAL;
+
+	spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
+
+	mid_enable_pipe_event(dev_priv, pipe);
+	psb_enable_pipestat(dev_priv, pipe, PIPE_VBLANK_INTERRUPT_ENABLE);
+
+	spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
+
+	return 0;
+}
+
+/*
+ * It is used to disable VBLANK interrupt
+ */
+void psb_disable_vblank(struct drm_device *dev, int pipe)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
+
+	mid_disable_pipe_event(dev_priv, pipe);
+	psb_disable_pipestat(dev_priv, pipe, PIPE_VBLANK_INTERRUPT_ENABLE);
+
+	spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
+}
+
+/* Called from drm generic code, passed a 'crtc', which
+ * we use as a pipe index
+ */
+u32 psb_get_vblank_counter(struct drm_device *dev, int pipe)
+{
+	uint32_t high_frame = PIPEAFRAMEHIGH;
+	uint32_t low_frame = PIPEAFRAMEPIXEL;
+	uint32_t pipeconf_reg = PIPEACONF;
+	uint32_t reg_val = 0;
+	uint32_t high1 = 0, high2 = 0, low = 0, count = 0;
+
+	switch (pipe) {
+	case 0:
+		break;
+	case 1:
+		high_frame = PIPEBFRAMEHIGH;
+		low_frame = PIPEBFRAMEPIXEL;
+		pipeconf_reg = PIPEBCONF;
+		break;
+	case 2:
+		high_frame = PIPECFRAMEHIGH;
+		low_frame = PIPECFRAMEPIXEL;
+		pipeconf_reg = PIPECCONF;
+		break;
+	default:
+		dev_err(dev->dev, "%s, invalid pipe.\n", __func__);
+		return 0;
+	}
+
+	if (!gma_power_begin(dev, false))
+		return 0;
+
+	reg_val = REG_READ(pipeconf_reg);
+
+	if (!(reg_val & PIPEACONF_ENABLE)) {
+		dev_err(dev->dev, "trying to get vblank count for disabled pipe %d\n",
+								pipe);
+		goto psb_get_vblank_counter_exit;
+	}
+
+	/*
+	 * High & low register fields aren't synchronized, so make sure
+	 * we get a low value that's stable across two reads of the high
+	 * register.
+	 */
+	do {
+		high1 = ((REG_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >>
+			 PIPE_FRAME_HIGH_SHIFT);
+		low =  ((REG_READ(low_frame) & PIPE_FRAME_LOW_MASK) >>
+			PIPE_FRAME_LOW_SHIFT);
+		high2 = ((REG_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >>
+			 PIPE_FRAME_HIGH_SHIFT);
+	} while (high1 != high2);
+
+	count = (high1 << 8) | low;
+
+psb_get_vblank_counter_exit:
+
+	gma_power_end(dev);
+
+	return count;
+}
+
diff --git a/drivers/gpu/drm/gma500/psb_irq.h b/drivers/gpu/drm/gma500/psb_irq.h
new file mode 100644
index 0000000..216fda3
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_irq.h
@@ -0,0 +1,45 @@
+/**************************************************************************
+ * Copyright (c) 2009-2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *    Benjamin Defnet <benjamin.r.defnet@intel.com>
+ *    Rajesh Poornachandran <rajesh.poornachandran@intel.com>
+ *
+ **************************************************************************/
+
+#ifndef _SYSIRQ_H_
+#define _SYSIRQ_H_
+
+#include <drm/drmP.h>
+
+bool sysirq_init(struct drm_device *dev);
+void sysirq_uninit(struct drm_device *dev);
+
+void psb_irq_preinstall(struct drm_device *dev);
+int  psb_irq_postinstall(struct drm_device *dev);
+void psb_irq_uninstall(struct drm_device *dev);
+irqreturn_t psb_irq_handler(DRM_IRQ_ARGS);
+
+int psb_irq_enable_dpst(struct drm_device *dev);
+int psb_irq_disable_dpst(struct drm_device *dev);
+void psb_irq_turn_on_dpst(struct drm_device *dev);
+void psb_irq_turn_off_dpst(struct drm_device *dev);
+int  psb_enable_vblank(struct drm_device *dev, int pipe);
+void psb_disable_vblank(struct drm_device *dev, int pipe);
+u32  psb_get_vblank_counter(struct drm_device *dev, int pipe);
+
+#endif /* _SYSIRQ_H_ */
diff --git a/drivers/gpu/drm/gma500/psb_reg.h b/drivers/gpu/drm/gma500/psb_reg.h
new file mode 100644
index 0000000..b81c7c1
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_reg.h
@@ -0,0 +1,582 @@
+/**************************************************************************
+ *
+ * Copyright (c) (2005-2007) Imagination Technologies Limited.
+ * Copyright (c) 2007, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA..
+ *
+ **************************************************************************/
+
+#ifndef _PSB_REG_H_
+#define _PSB_REG_H_
+
+#define PSB_CR_CLKGATECTL		0x0000
+#define _PSB_C_CLKGATECTL_AUTO_MAN_REG		(1 << 24)
+#define _PSB_C_CLKGATECTL_USE_CLKG_SHIFT	(20)
+#define _PSB_C_CLKGATECTL_USE_CLKG_MASK		(0x3 << 20)
+#define _PSB_C_CLKGATECTL_DPM_CLKG_SHIFT	(16)
+#define _PSB_C_CLKGATECTL_DPM_CLKG_MASK		(0x3 << 16)
+#define _PSB_C_CLKGATECTL_TA_CLKG_SHIFT		(12)
+#define _PSB_C_CLKGATECTL_TA_CLKG_MASK		(0x3 << 12)
+#define _PSB_C_CLKGATECTL_TSP_CLKG_SHIFT	(8)
+#define _PSB_C_CLKGATECTL_TSP_CLKG_MASK		(0x3 << 8)
+#define _PSB_C_CLKGATECTL_ISP_CLKG_SHIFT	(4)
+#define _PSB_C_CLKGATECTL_ISP_CLKG_MASK		(0x3 << 4)
+#define _PSB_C_CLKGATECTL_2D_CLKG_SHIFT		(0)
+#define _PSB_C_CLKGATECTL_2D_CLKG_MASK		(0x3 << 0)
+#define _PSB_C_CLKGATECTL_CLKG_ENABLED		(0)
+#define _PSB_C_CLKGATECTL_CLKG_DISABLED		(1)
+#define _PSB_C_CLKGATECTL_CLKG_AUTO		(2)
+
+#define PSB_CR_CORE_ID			0x0010
+#define _PSB_CC_ID_ID_SHIFT			(16)
+#define _PSB_CC_ID_ID_MASK			(0xFFFF << 16)
+#define _PSB_CC_ID_CONFIG_SHIFT			(0)
+#define _PSB_CC_ID_CONFIG_MASK			(0xFFFF << 0)
+
+#define PSB_CR_CORE_REVISION		0x0014
+#define _PSB_CC_REVISION_DESIGNER_SHIFT		(24)
+#define _PSB_CC_REVISION_DESIGNER_MASK		(0xFF << 24)
+#define _PSB_CC_REVISION_MAJOR_SHIFT		(16)
+#define _PSB_CC_REVISION_MAJOR_MASK		(0xFF << 16)
+#define _PSB_CC_REVISION_MINOR_SHIFT		(8)
+#define _PSB_CC_REVISION_MINOR_MASK		(0xFF << 8)
+#define _PSB_CC_REVISION_MAINTENANCE_SHIFT	(0)
+#define _PSB_CC_REVISION_MAINTENANCE_MASK	(0xFF << 0)
+
+#define PSB_CR_DESIGNER_REV_FIELD1	0x0018
+
+#define PSB_CR_SOFT_RESET		0x0080
+#define _PSB_CS_RESET_TSP_RESET		(1 << 6)
+#define _PSB_CS_RESET_ISP_RESET		(1 << 5)
+#define _PSB_CS_RESET_USE_RESET		(1 << 4)
+#define _PSB_CS_RESET_TA_RESET		(1 << 3)
+#define _PSB_CS_RESET_DPM_RESET		(1 << 2)
+#define _PSB_CS_RESET_TWOD_RESET	(1 << 1)
+#define _PSB_CS_RESET_BIF_RESET			(1 << 0)
+
+#define PSB_CR_DESIGNER_REV_FIELD2	0x001C
+
+#define PSB_CR_EVENT_HOST_ENABLE2	0x0110
+
+#define PSB_CR_EVENT_STATUS2		0x0118
+
+#define PSB_CR_EVENT_HOST_CLEAR2	0x0114
+#define _PSB_CE2_BIF_REQUESTER_FAULT		(1 << 4)
+
+#define PSB_CR_EVENT_STATUS		0x012C
+
+#define PSB_CR_EVENT_HOST_ENABLE	0x0130
+
+#define PSB_CR_EVENT_HOST_CLEAR		0x0134
+#define _PSB_CE_MASTER_INTERRUPT		(1 << 31)
+#define _PSB_CE_TA_DPM_FAULT			(1 << 28)
+#define _PSB_CE_TWOD_COMPLETE			(1 << 27)
+#define _PSB_CE_DPM_OUT_OF_MEMORY_ZLS		(1 << 25)
+#define _PSB_CE_DPM_TA_MEM_FREE			(1 << 24)
+#define _PSB_CE_PIXELBE_END_RENDER		(1 << 18)
+#define _PSB_CE_SW_EVENT			(1 << 14)
+#define _PSB_CE_TA_FINISHED			(1 << 13)
+#define _PSB_CE_TA_TERMINATE			(1 << 12)
+#define _PSB_CE_DPM_REACHED_MEM_THRESH		(1 << 3)
+#define _PSB_CE_DPM_OUT_OF_MEMORY_GBL		(1 << 2)
+#define _PSB_CE_DPM_OUT_OF_MEMORY_MT		(1 << 1)
+#define _PSB_CE_DPM_3D_MEM_FREE			(1 << 0)
+
+
+#define PSB_USE_OFFSET_MASK		0x0007FFFF
+#define PSB_USE_OFFSET_SIZE		(PSB_USE_OFFSET_MASK + 1)
+#define PSB_CR_USE_CODE_BASE0		0x0A0C
+#define PSB_CR_USE_CODE_BASE1		0x0A10
+#define PSB_CR_USE_CODE_BASE2		0x0A14
+#define PSB_CR_USE_CODE_BASE3		0x0A18
+#define PSB_CR_USE_CODE_BASE4		0x0A1C
+#define PSB_CR_USE_CODE_BASE5		0x0A20
+#define PSB_CR_USE_CODE_BASE6		0x0A24
+#define PSB_CR_USE_CODE_BASE7		0x0A28
+#define PSB_CR_USE_CODE_BASE8		0x0A2C
+#define PSB_CR_USE_CODE_BASE9		0x0A30
+#define PSB_CR_USE_CODE_BASE10		0x0A34
+#define PSB_CR_USE_CODE_BASE11		0x0A38
+#define PSB_CR_USE_CODE_BASE12		0x0A3C
+#define PSB_CR_USE_CODE_BASE13		0x0A40
+#define PSB_CR_USE_CODE_BASE14		0x0A44
+#define PSB_CR_USE_CODE_BASE15		0x0A48
+#define PSB_CR_USE_CODE_BASE(_i)	(0x0A0C + ((_i) << 2))
+#define _PSB_CUC_BASE_DM_SHIFT			(25)
+#define _PSB_CUC_BASE_DM_MASK			(0x3 << 25)
+#define _PSB_CUC_BASE_ADDR_SHIFT		(0)	/* 1024-bit aligned address? */
+#define _PSB_CUC_BASE_ADDR_ALIGNSHIFT		(7)
+#define _PSB_CUC_BASE_ADDR_MASK			(0x1FFFFFF << 0)
+#define _PSB_CUC_DM_VERTEX			(0)
+#define _PSB_CUC_DM_PIXEL			(1)
+#define _PSB_CUC_DM_RESERVED			(2)
+#define _PSB_CUC_DM_EDM				(3)
+
+#define PSB_CR_PDS_EXEC_BASE		0x0AB8
+#define _PSB_CR_PDS_EXEC_BASE_ADDR_SHIFT	(20)	/* 1MB aligned address */
+#define _PSB_CR_PDS_EXEC_BASE_ADDR_ALIGNSHIFT	(20)
+
+#define PSB_CR_EVENT_KICKER		0x0AC4
+#define _PSB_CE_KICKER_ADDRESS_SHIFT		(4)	/* 128-bit aligned address */
+
+#define PSB_CR_EVENT_KICK		0x0AC8
+#define _PSB_CE_KICK_NOW			(1 << 0)
+
+#define PSB_CR_BIF_DIR_LIST_BASE1	0x0C38
+
+#define PSB_CR_BIF_CTRL			0x0C00
+#define _PSB_CB_CTRL_CLEAR_FAULT		(1 << 4)
+#define _PSB_CB_CTRL_INVALDC			(1 << 3)
+#define _PSB_CB_CTRL_FLUSH			(1 << 2)
+
+#define PSB_CR_BIF_INT_STAT		0x0C04
+
+#define PSB_CR_BIF_FAULT		0x0C08
+#define _PSB_CBI_STAT_PF_N_RW			(1 << 14)
+#define _PSB_CBI_STAT_FAULT_SHIFT		(0)
+#define _PSB_CBI_STAT_FAULT_MASK		(0x3FFF << 0)
+#define _PSB_CBI_STAT_FAULT_CACHE		(1 << 1)
+#define _PSB_CBI_STAT_FAULT_TA			(1 << 2)
+#define _PSB_CBI_STAT_FAULT_VDM			(1 << 3)
+#define _PSB_CBI_STAT_FAULT_2D			(1 << 4)
+#define _PSB_CBI_STAT_FAULT_PBE			(1 << 5)
+#define _PSB_CBI_STAT_FAULT_TSP			(1 << 6)
+#define _PSB_CBI_STAT_FAULT_ISP			(1 << 7)
+#define _PSB_CBI_STAT_FAULT_USSEPDS		(1 << 8)
+#define _PSB_CBI_STAT_FAULT_HOST		(1 << 9)
+
+#define PSB_CR_BIF_BANK0		0x0C78
+#define PSB_CR_BIF_BANK1		0x0C7C
+#define PSB_CR_BIF_DIR_LIST_BASE0	0x0C84
+#define PSB_CR_BIF_TWOD_REQ_BASE	0x0C88
+#define PSB_CR_BIF_3D_REQ_BASE		0x0CAC
+
+#define PSB_CR_2D_SOCIF			0x0E18
+#define _PSB_C2_SOCIF_FREESPACE_SHIFT		(0)
+#define _PSB_C2_SOCIF_FREESPACE_MASK		(0xFF << 0)
+#define _PSB_C2_SOCIF_EMPTY			(0x80 << 0)
+
+#define PSB_CR_2D_BLIT_STATUS		0x0E04
+#define _PSB_C2B_STATUS_BUSY			(1 << 24)
+#define _PSB_C2B_STATUS_COMPLETE_SHIFT		(0)
+#define _PSB_C2B_STATUS_COMPLETE_MASK		(0xFFFFFF << 0)
+
+/*
+ * 2D defs.
+ */
+
+/*
+ * 2D Slave Port Data : Block Header's Object Type
+ */
+
+#define	PSB_2D_CLIP_BH			(0x00000000)
+#define	PSB_2D_PAT_BH			(0x10000000)
+#define	PSB_2D_CTRL_BH			(0x20000000)
+#define	PSB_2D_SRC_OFF_BH		(0x30000000)
+#define	PSB_2D_MASK_OFF_BH		(0x40000000)
+#define	PSB_2D_RESERVED1_BH		(0x50000000)
+#define	PSB_2D_RESERVED2_BH		(0x60000000)
+#define	PSB_2D_FENCE_BH			(0x70000000)
+#define	PSB_2D_BLIT_BH			(0x80000000)
+#define	PSB_2D_SRC_SURF_BH		(0x90000000)
+#define	PSB_2D_DST_SURF_BH		(0xA0000000)
+#define	PSB_2D_PAT_SURF_BH		(0xB0000000)
+#define	PSB_2D_SRC_PAL_BH		(0xC0000000)
+#define	PSB_2D_PAT_PAL_BH		(0xD0000000)
+#define	PSB_2D_MASK_SURF_BH		(0xE0000000)
+#define	PSB_2D_FLUSH_BH			(0xF0000000)
+
+/*
+ * Clip Definition block (PSB_2D_CLIP_BH)
+ */
+#define PSB_2D_CLIPCOUNT_MAX		(1)
+#define PSB_2D_CLIPCOUNT_MASK		(0x00000000)
+#define PSB_2D_CLIPCOUNT_CLRMASK	(0xFFFFFFFF)
+#define PSB_2D_CLIPCOUNT_SHIFT		(0)
+/* clip rectangle min & max */
+#define PSB_2D_CLIP_XMAX_MASK		(0x00FFF000)
+#define PSB_2D_CLIP_XMAX_CLRMASK	(0xFF000FFF)
+#define PSB_2D_CLIP_XMAX_SHIFT		(12)
+#define PSB_2D_CLIP_XMIN_MASK		(0x00000FFF)
+#define PSB_2D_CLIP_XMIN_CLRMASK	(0x00FFF000)
+#define PSB_2D_CLIP_XMIN_SHIFT		(0)
+/* clip rectangle offset */
+#define PSB_2D_CLIP_YMAX_MASK		(0x00FFF000)
+#define PSB_2D_CLIP_YMAX_CLRMASK	(0xFF000FFF)
+#define PSB_2D_CLIP_YMAX_SHIFT		(12)
+#define PSB_2D_CLIP_YMIN_MASK		(0x00000FFF)
+#define PSB_2D_CLIP_YMIN_CLRMASK	(0x00FFF000)
+#define PSB_2D_CLIP_YMIN_SHIFT		(0)
+
+/*
+ * Pattern Control (PSB_2D_PAT_BH)
+ */
+#define PSB_2D_PAT_HEIGHT_MASK		(0x0000001F)
+#define PSB_2D_PAT_HEIGHT_SHIFT		(0)
+#define PSB_2D_PAT_WIDTH_MASK		(0x000003E0)
+#define PSB_2D_PAT_WIDTH_SHIFT		(5)
+#define PSB_2D_PAT_YSTART_MASK		(0x00007C00)
+#define PSB_2D_PAT_YSTART_SHIFT		(10)
+#define PSB_2D_PAT_XSTART_MASK		(0x000F8000)
+#define PSB_2D_PAT_XSTART_SHIFT		(15)
+
+/*
+ * 2D Control block (PSB_2D_CTRL_BH)
+ */
+/* Present Flags */
+#define PSB_2D_SRCCK_CTRL		(0x00000001)
+#define PSB_2D_DSTCK_CTRL		(0x00000002)
+#define PSB_2D_ALPHA_CTRL		(0x00000004)
+/* Colour Key Colour (SRC/DST)*/
+#define PSB_2D_CK_COL_MASK		(0xFFFFFFFF)
+#define PSB_2D_CK_COL_CLRMASK		(0x00000000)
+#define PSB_2D_CK_COL_SHIFT		(0)
+/* Colour Key Mask (SRC/DST)*/
+#define PSB_2D_CK_MASK_MASK		(0xFFFFFFFF)
+#define PSB_2D_CK_MASK_CLRMASK		(0x00000000)
+#define PSB_2D_CK_MASK_SHIFT		(0)
+/* Alpha Control (Alpha/RGB)*/
+#define PSB_2D_GBLALPHA_MASK		(0x000FF000)
+#define PSB_2D_GBLALPHA_CLRMASK		(0xFFF00FFF)
+#define PSB_2D_GBLALPHA_SHIFT		(12)
+#define PSB_2D_SRCALPHA_OP_MASK		(0x00700000)
+#define PSB_2D_SRCALPHA_OP_CLRMASK	(0xFF8FFFFF)
+#define PSB_2D_SRCALPHA_OP_SHIFT	(20)
+#define PSB_2D_SRCALPHA_OP_ONE		(0x00000000)
+#define PSB_2D_SRCALPHA_OP_SRC		(0x00100000)
+#define PSB_2D_SRCALPHA_OP_DST		(0x00200000)
+#define PSB_2D_SRCALPHA_OP_SG		(0x00300000)
+#define PSB_2D_SRCALPHA_OP_DG		(0x00400000)
+#define PSB_2D_SRCALPHA_OP_GBL		(0x00500000)
+#define PSB_2D_SRCALPHA_OP_ZERO		(0x00600000)
+#define PSB_2D_SRCALPHA_INVERT		(0x00800000)
+#define PSB_2D_SRCALPHA_INVERT_CLR	(0xFF7FFFFF)
+#define PSB_2D_DSTALPHA_OP_MASK		(0x07000000)
+#define PSB_2D_DSTALPHA_OP_CLRMASK	(0xF8FFFFFF)
+#define PSB_2D_DSTALPHA_OP_SHIFT	(24)
+#define PSB_2D_DSTALPHA_OP_ONE		(0x00000000)
+#define PSB_2D_DSTALPHA_OP_SRC		(0x01000000)
+#define PSB_2D_DSTALPHA_OP_DST		(0x02000000)
+#define PSB_2D_DSTALPHA_OP_SG		(0x03000000)
+#define PSB_2D_DSTALPHA_OP_DG		(0x04000000)
+#define PSB_2D_DSTALPHA_OP_GBL		(0x05000000)
+#define PSB_2D_DSTALPHA_OP_ZERO		(0x06000000)
+#define PSB_2D_DSTALPHA_INVERT		(0x08000000)
+#define PSB_2D_DSTALPHA_INVERT_CLR	(0xF7FFFFFF)
+
+#define PSB_2D_PRE_MULTIPLICATION_ENABLE	(0x10000000)
+#define PSB_2D_PRE_MULTIPLICATION_CLRMASK	(0xEFFFFFFF)
+#define PSB_2D_ZERO_SOURCE_ALPHA_ENABLE		(0x20000000)
+#define PSB_2D_ZERO_SOURCE_ALPHA_CLRMASK	(0xDFFFFFFF)
+
+/*
+ *Source Offset (PSB_2D_SRC_OFF_BH)
+ */
+#define PSB_2D_SRCOFF_XSTART_MASK	((0x00000FFF) << 12)
+#define PSB_2D_SRCOFF_XSTART_SHIFT	(12)
+#define PSB_2D_SRCOFF_YSTART_MASK	(0x00000FFF)
+#define PSB_2D_SRCOFF_YSTART_SHIFT	(0)
+
+/*
+ * Mask Offset (PSB_2D_MASK_OFF_BH)
+ */
+#define PSB_2D_MASKOFF_XSTART_MASK	((0x00000FFF) << 12)
+#define PSB_2D_MASKOFF_XSTART_SHIFT	(12)
+#define PSB_2D_MASKOFF_YSTART_MASK	(0x00000FFF)
+#define PSB_2D_MASKOFF_YSTART_SHIFT	(0)
+
+/*
+ * 2D Fence (see PSB_2D_FENCE_BH): bits 0:27 are ignored
+ */
+
+/*
+ *Blit Rectangle (PSB_2D_BLIT_BH)
+ */
+
+#define PSB_2D_ROT_MASK			(3 << 25)
+#define PSB_2D_ROT_CLRMASK		(~PSB_2D_ROT_MASK)
+#define PSB_2D_ROT_NONE			(0 << 25)
+#define PSB_2D_ROT_90DEGS		(1 << 25)
+#define PSB_2D_ROT_180DEGS		(2 << 25)
+#define PSB_2D_ROT_270DEGS		(3 << 25)
+
+#define PSB_2D_COPYORDER_MASK		(3 << 23)
+#define PSB_2D_COPYORDER_CLRMASK	(~PSB_2D_COPYORDER_MASK)
+#define PSB_2D_COPYORDER_TL2BR		(0 << 23)
+#define PSB_2D_COPYORDER_BR2TL		(1 << 23)
+#define PSB_2D_COPYORDER_TR2BL		(2 << 23)
+#define PSB_2D_COPYORDER_BL2TR		(3 << 23)
+
+#define PSB_2D_DSTCK_CLRMASK		(0xFF9FFFFF)
+#define PSB_2D_DSTCK_DISABLE		(0x00000000)
+#define PSB_2D_DSTCK_PASS		(0x00200000)
+#define PSB_2D_DSTCK_REJECT		(0x00400000)
+
+#define PSB_2D_SRCCK_CLRMASK		(0xFFE7FFFF)
+#define PSB_2D_SRCCK_DISABLE		(0x00000000)
+#define PSB_2D_SRCCK_PASS		(0x00080000)
+#define PSB_2D_SRCCK_REJECT		(0x00100000)
+
+#define PSB_2D_CLIP_ENABLE		(0x00040000)
+
+#define PSB_2D_ALPHA_ENABLE		(0x00020000)
+
+#define PSB_2D_PAT_CLRMASK		(0xFFFEFFFF)
+#define PSB_2D_PAT_MASK			(0x00010000)
+#define PSB_2D_USE_PAT			(0x00010000)
+#define PSB_2D_USE_FILL			(0x00000000)
+/*
+ * Tungsten Graphics note on rop codes: If rop A and rop B are
+ * identical, the mask surface will not be read and need not be
+ * set up.
+ */
+
+#define PSB_2D_ROP3B_MASK		(0x0000FF00)
+#define PSB_2D_ROP3B_CLRMASK		(0xFFFF00FF)
+#define PSB_2D_ROP3B_SHIFT		(8)
+/* rop code A */
+#define PSB_2D_ROP3A_MASK		(0x000000FF)
+#define PSB_2D_ROP3A_CLRMASK		(0xFFFFFF00)
+#define PSB_2D_ROP3A_SHIFT		(0)
+
+#define PSB_2D_ROP4_MASK		(0x0000FFFF)
+/*
+ *	DWORD0:	(Only pass if Pattern control == Use Fill Colour)
+ *	Fill Colour RGBA8888
+ */
+#define PSB_2D_FILLCOLOUR_MASK		(0xFFFFFFFF)
+#define PSB_2D_FILLCOLOUR_SHIFT		(0)
+/*
+ *	DWORD1: (Always Present)
+ *	X Start (Dest)
+ *	Y Start (Dest)
+ */
+#define PSB_2D_DST_XSTART_MASK		(0x00FFF000)
+#define PSB_2D_DST_XSTART_CLRMASK	(0xFF000FFF)
+#define PSB_2D_DST_XSTART_SHIFT		(12)
+#define PSB_2D_DST_YSTART_MASK		(0x00000FFF)
+#define PSB_2D_DST_YSTART_CLRMASK	(0xFFFFF000)
+#define PSB_2D_DST_YSTART_SHIFT		(0)
+/*
+ *	DWORD2: (Always Present)
+ *	X Size (Dest)
+ *	Y Size (Dest)
+ */
+#define PSB_2D_DST_XSIZE_MASK		(0x00FFF000)
+#define PSB_2D_DST_XSIZE_CLRMASK	(0xFF000FFF)
+#define PSB_2D_DST_XSIZE_SHIFT		(12)
+#define PSB_2D_DST_YSIZE_MASK		(0x00000FFF)
+#define PSB_2D_DST_YSIZE_CLRMASK	(0xFFFFF000)
+#define PSB_2D_DST_YSIZE_SHIFT		(0)
+
+/*
+ * Source Surface (PSB_2D_SRC_SURF_BH)
+ */
+/*
+ * WORD 0
+ */
+
+#define PSB_2D_SRC_FORMAT_MASK		(0x00078000)
+#define PSB_2D_SRC_1_PAL		(0x00000000)
+#define PSB_2D_SRC_2_PAL		(0x00008000)
+#define PSB_2D_SRC_4_PAL		(0x00010000)
+#define PSB_2D_SRC_8_PAL		(0x00018000)
+#define PSB_2D_SRC_8_ALPHA		(0x00020000)
+#define PSB_2D_SRC_4_ALPHA		(0x00028000)
+#define PSB_2D_SRC_332RGB		(0x00030000)
+#define PSB_2D_SRC_4444ARGB		(0x00038000)
+#define PSB_2D_SRC_555RGB		(0x00040000)
+#define PSB_2D_SRC_1555ARGB		(0x00048000)
+#define PSB_2D_SRC_565RGB		(0x00050000)
+#define PSB_2D_SRC_0888ARGB		(0x00058000)
+#define PSB_2D_SRC_8888ARGB		(0x00060000)
+#define PSB_2D_SRC_8888UYVY		(0x00068000)
+#define PSB_2D_SRC_RESERVED		(0x00070000)
+#define PSB_2D_SRC_1555ARGB_LOOKUP	(0x00078000)
+
+
+#define PSB_2D_SRC_STRIDE_MASK		(0x00007FFF)
+#define PSB_2D_SRC_STRIDE_CLRMASK	(0xFFFF8000)
+#define PSB_2D_SRC_STRIDE_SHIFT		(0)
+/*
+ *  WORD 1 - Base Address
+ */
+#define PSB_2D_SRC_ADDR_MASK		(0x0FFFFFFC)
+#define PSB_2D_SRC_ADDR_CLRMASK		(0x00000003)
+#define PSB_2D_SRC_ADDR_SHIFT		(2)
+#define PSB_2D_SRC_ADDR_ALIGNSHIFT	(2)
+
+/*
+ * Pattern Surface (PSB_2D_PAT_SURF_BH)
+ */
+/*
+ *  WORD 0
+ */
+
+#define PSB_2D_PAT_FORMAT_MASK		(0x00078000)
+#define PSB_2D_PAT_1_PAL		(0x00000000)
+#define PSB_2D_PAT_2_PAL		(0x00008000)
+#define PSB_2D_PAT_4_PAL		(0x00010000)
+#define PSB_2D_PAT_8_PAL		(0x00018000)
+#define PSB_2D_PAT_8_ALPHA		(0x00020000)
+#define PSB_2D_PAT_4_ALPHA		(0x00028000)
+#define PSB_2D_PAT_332RGB		(0x00030000)
+#define PSB_2D_PAT_4444ARGB		(0x00038000)
+#define PSB_2D_PAT_555RGB		(0x00040000)
+#define PSB_2D_PAT_1555ARGB		(0x00048000)
+#define PSB_2D_PAT_565RGB		(0x00050000)
+#define PSB_2D_PAT_0888ARGB		(0x00058000)
+#define PSB_2D_PAT_8888ARGB		(0x00060000)
+
+#define PSB_2D_PAT_STRIDE_MASK		(0x00007FFF)
+#define PSB_2D_PAT_STRIDE_CLRMASK	(0xFFFF8000)
+#define PSB_2D_PAT_STRIDE_SHIFT		(0)
+/*
+ *  WORD 1 - Base Address
+ */
+#define PSB_2D_PAT_ADDR_MASK		(0x0FFFFFFC)
+#define PSB_2D_PAT_ADDR_CLRMASK		(0x00000003)
+#define PSB_2D_PAT_ADDR_SHIFT		(2)
+#define PSB_2D_PAT_ADDR_ALIGNSHIFT	(2)
+
+/*
+ * Destination Surface (PSB_2D_DST_SURF_BH)
+ */
+/*
+ * WORD 0
+ */
+
+#define PSB_2D_DST_FORMAT_MASK		(0x00078000)
+#define PSB_2D_DST_332RGB		(0x00030000)
+#define PSB_2D_DST_4444ARGB		(0x00038000)
+#define PSB_2D_DST_555RGB		(0x00040000)
+#define PSB_2D_DST_1555ARGB		(0x00048000)
+#define PSB_2D_DST_565RGB		(0x00050000)
+#define PSB_2D_DST_0888ARGB		(0x00058000)
+#define PSB_2D_DST_8888ARGB		(0x00060000)
+#define PSB_2D_DST_8888AYUV		(0x00070000)
+
+#define PSB_2D_DST_STRIDE_MASK		(0x00007FFF)
+#define PSB_2D_DST_STRIDE_CLRMASK	(0xFFFF8000)
+#define PSB_2D_DST_STRIDE_SHIFT		(0)
+/*
+ * WORD 1 - Base Address
+ */
+#define PSB_2D_DST_ADDR_MASK		(0x0FFFFFFC)
+#define PSB_2D_DST_ADDR_CLRMASK		(0x00000003)
+#define PSB_2D_DST_ADDR_SHIFT		(2)
+#define PSB_2D_DST_ADDR_ALIGNSHIFT	(2)
+
+/*
+ * Mask Surface (PSB_2D_MASK_SURF_BH)
+ */
+/*
+ * WORD 0
+ */
+#define PSB_2D_MASK_STRIDE_MASK		(0x00007FFF)
+#define PSB_2D_MASK_STRIDE_CLRMASK	(0xFFFF8000)
+#define PSB_2D_MASK_STRIDE_SHIFT	(0)
+/*
+ *  WORD 1 - Base Address
+ */
+#define PSB_2D_MASK_ADDR_MASK		(0x0FFFFFFC)
+#define PSB_2D_MASK_ADDR_CLRMASK	(0x00000003)
+#define PSB_2D_MASK_ADDR_SHIFT		(2)
+#define PSB_2D_MASK_ADDR_ALIGNSHIFT	(2)
+
+/*
+ * Source Palette (PSB_2D_SRC_PAL_BH)
+ */
+
+#define PSB_2D_SRCPAL_ADDR_SHIFT	(0)
+#define PSB_2D_SRCPAL_ADDR_CLRMASK	(0xF0000007)
+#define PSB_2D_SRCPAL_ADDR_MASK		(0x0FFFFFF8)
+#define PSB_2D_SRCPAL_BYTEALIGN		(1024)
+
+/*
+ * Pattern Palette (PSB_2D_PAT_PAL_BH)
+ */
+
+#define PSB_2D_PATPAL_ADDR_SHIFT	(0)
+#define PSB_2D_PATPAL_ADDR_CLRMASK	(0xF0000007)
+#define PSB_2D_PATPAL_ADDR_MASK		(0x0FFFFFF8)
+#define PSB_2D_PATPAL_BYTEALIGN		(1024)
+
+/*
+ * Rop3 Codes (2 LS bytes)
+ */
+
+#define PSB_2D_ROP3_SRCCOPY		(0xCCCC)
+#define PSB_2D_ROP3_PATCOPY		(0xF0F0)
+#define PSB_2D_ROP3_WHITENESS		(0xFFFF)
+#define PSB_2D_ROP3_BLACKNESS		(0x0000)
+#define PSB_2D_ROP3_SRC			(0xCC)
+#define PSB_2D_ROP3_PAT			(0xF0)
+#define PSB_2D_ROP3_DST			(0xAA)
+
+/*
+ * Sizes.
+ */
+
+#define PSB_SCENE_HW_COOKIE_SIZE	16
+#define PSB_TA_MEM_HW_COOKIE_SIZE	16
+
+/*
+ * Scene stuff.
+ */
+
+#define PSB_NUM_HW_SCENES		2
+
+/*
+ * Scheduler completion actions.
+ */
+
+#define PSB_RASTER_BLOCK		0
+#define PSB_RASTER			1
+#define PSB_RETURN			2
+#define PSB_TA				3
+
+/* Power management */
+#define PSB_PUNIT_PORT			0x04
+#define PSB_OSPMBA			0x78
+#define PSB_APMBA			0x7a
+#define PSB_APM_CMD			0x0
+#define PSB_APM_STS			0x04
+#define PSB_PWRGT_VID_ENC_MASK		0x30
+#define PSB_PWRGT_VID_DEC_MASK		0xc
+#define PSB_PWRGT_GL3_MASK		0xc0
+
+#define PSB_PM_SSC			0x20
+#define PSB_PM_SSS			0x30
+#define PSB_PWRGT_DISPLAY_MASK		0xc /*on a different BA than video/gfx*/
+#define MDFLD_PWRGT_DISPLAY_A_CNTR	0x0000000c
+#define MDFLD_PWRGT_DISPLAY_B_CNTR	0x0000c000
+#define MDFLD_PWRGT_DISPLAY_C_CNTR	0x00030000
+#define MDFLD_PWRGT_DISP_MIPI_CNTR	0x000c0000
+#define MDFLD_PWRGT_DISPLAY_CNTR    (MDFLD_PWRGT_DISPLAY_A_CNTR | MDFLD_PWRGT_DISPLAY_B_CNTR | MDFLD_PWRGT_DISPLAY_C_CNTR | MDFLD_PWRGT_DISP_MIPI_CNTR) /* 0x000fc00c */
+/* Display SSS register bits are different in A0 vs. B0 */
+#define PSB_PWRGT_GFX_MASK		0x3
+#define MDFLD_PWRGT_DISPLAY_A_STS	0x000000c0
+#define MDFLD_PWRGT_DISPLAY_B_STS	0x00000300
+#define MDFLD_PWRGT_DISPLAY_C_STS	0x00000c00
+#define PSB_PWRGT_GFX_MASK_B0		0xc3
+#define MDFLD_PWRGT_DISPLAY_A_STS_B0	0x0000000c
+#define MDFLD_PWRGT_DISPLAY_B_STS_B0	0x0000c000
+#define MDFLD_PWRGT_DISPLAY_C_STS_B0	0x00030000
+#define MDFLD_PWRGT_DISP_MIPI_STS	0x000c0000
+#define MDFLD_PWRGT_DISPLAY_STS_A0    (MDFLD_PWRGT_DISPLAY_A_STS | MDFLD_PWRGT_DISPLAY_B_STS | MDFLD_PWRGT_DISPLAY_C_STS | MDFLD_PWRGT_DISP_MIPI_STS) /* 0x000fc00c */
+#define MDFLD_PWRGT_DISPLAY_STS_B0    (MDFLD_PWRGT_DISPLAY_A_STS_B0 | MDFLD_PWRGT_DISPLAY_B_STS_B0 | MDFLD_PWRGT_DISPLAY_C_STS_B0 | MDFLD_PWRGT_DISP_MIPI_STS) /* 0x000fc00c */
+#endif

[PATCH 09/12] gma500: Add Poulsbo support

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

This provides the specific code for Poulsbo, some of which is also used for
the later chipsets. We support the GTT, the 2D engine (for console), and
the display setup/management. We do not support 3D or the video overlays.

In theory enough public info is available to do the video overlay work
but that represents a large task.

Framebuffer X will run nicely with this but do *NOT* use the VESA X
server at the same time as KMS. With a Dell mini 10 things like Xfce4 are
nice and usable even when compositing as the CPU has a good path to the
memory.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/psb_device.c          |  353 ++++++
 drivers/gpu/drm/gma500/psb_gfx.mod.c         |   51 +
 drivers/gpu/drm/gma500/psb_intel_display.c   | 1431 ++++++++++++++++++++++++++
 drivers/gpu/drm/gma500/psb_intel_display.h   |   28 +
 drivers/gpu/drm/gma500/psb_intel_drv.h       |  228 ++++
 drivers/gpu/drm/gma500/psb_intel_lvds.c      |  849 +++++++++++++++
 drivers/gpu/drm/gma500/psb_intel_modes.c     |   77 +
 drivers/gpu/drm/gma500/psb_intel_reg.h       | 1235 ++++++++++++++++++++++
 drivers/gpu/drm/gma500/psb_intel_sdvo.c      | 1293 +++++++++++++++++++++++
 drivers/gpu/drm/gma500/psb_intel_sdvo_regs.h |  338 ++++++
 drivers/gpu/drm/gma500/psb_lid.c             |   90 ++
 11 files changed, 5973 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpu/drm/gma500/psb_device.c
 create mode 100644 drivers/gpu/drm/gma500/psb_gfx.mod.c
 create mode 100644 drivers/gpu/drm/gma500/psb_intel_display.c
 create mode 100644 drivers/gpu/drm/gma500/psb_intel_display.h
 create mode 100644 drivers/gpu/drm/gma500/psb_intel_drv.h
 create mode 100644 drivers/gpu/drm/gma500/psb_intel_lvds.c
 create mode 100644 drivers/gpu/drm/gma500/psb_intel_modes.c
 create mode 100644 drivers/gpu/drm/gma500/psb_intel_reg.h
 create mode 100644 drivers/gpu/drm/gma500/psb_intel_sdvo.c
 create mode 100644 drivers/gpu/drm/gma500/psb_intel_sdvo_regs.h
 create mode 100644 drivers/gpu/drm/gma500/psb_lid.c


diff --git a/drivers/gpu/drm/gma500/psb_device.c b/drivers/gpu/drm/gma500/psb_device.c
new file mode 100644
index 0000000..4659132
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_device.c
@@ -0,0 +1,353 @@
+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include <linux/backlight.h>
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "psb_drm.h"
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+#include "intel_bios.h"
+
+
+static int psb_output_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	psb_intel_lvds_init(dev, &dev_priv->mode_dev);
+	psb_intel_sdvo_init(dev, SDVOB);
+	return 0;
+}
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+
+/*
+ *	Poulsbo Backlight Interfaces
+ */
+
+#define BLC_PWM_PRECISION_FACTOR 100	/* 10000000 */
+#define BLC_PWM_FREQ_CALC_CONSTANT 32
+#define MHz 1000000
+
+#define PSB_BLC_PWM_PRECISION_FACTOR    10
+#define PSB_BLC_MAX_PWM_REG_FREQ        0xFFFE
+#define PSB_BLC_MIN_PWM_REG_FREQ        0x2
+
+#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
+#define PSB_BACKLIGHT_PWM_CTL_SHIFT	(16)
+
+static int psb_brightness;
+static struct backlight_device *psb_backlight_device;
+
+static int psb_get_brightness(struct backlight_device *bd)
+{
+	/* return locally cached var instead of HW read (due to DPST etc.) */
+	/* FIXME: ideally return actual value in case firmware fiddled with
+	   it */
+	return psb_brightness;
+}
+
+
+static int psb_backlight_setup(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	unsigned long core_clock;
+	/* u32 bl_max_freq; */
+	/* unsigned long value; */
+	u16 bl_max_freq;
+	uint32_t value;
+	uint32_t blc_pwm_precision_factor;
+
+	/* get bl_max_freq and pol from dev_priv*/
+	if (!dev_priv->lvds_bl) {
+		dev_err(dev->dev, "Has no valid LVDS backlight info\n");
+		return -ENOENT;
+	}
+	bl_max_freq = dev_priv->lvds_bl->freq;
+	blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR;
+
+	core_clock = dev_priv->core_freq;
+
+	value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
+	value *= blc_pwm_precision_factor;
+	value /= bl_max_freq;
+	value /= blc_pwm_precision_factor;
+
+	if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ ||
+		 value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ)
+				return -ERANGE;
+	else {
+		value &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
+		REG_WRITE(BLC_PWM_CTL,
+			(value << PSB_BACKLIGHT_PWM_CTL_SHIFT) | (value));
+	}
+	return 0;
+}
+
+static int psb_set_brightness(struct backlight_device *bd)
+{
+	struct drm_device *dev = bl_get_data(psb_backlight_device);
+	int level = bd->props.brightness;
+
+	/* Percentage 1-100% being valid */
+	if (level < 1)
+		level = 1;
+
+	psb_intel_lvds_set_brightness(dev, level);
+	psb_brightness = level;
+	return 0;
+}
+
+static const struct backlight_ops psb_ops = {
+	.get_brightness = psb_get_brightness,
+	.update_status  = psb_set_brightness,
+};
+
+static int psb_backlight_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int ret;
+	struct backlight_properties props;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 100;
+	props.type = BACKLIGHT_PLATFORM;
+
+	psb_backlight_device = backlight_device_register("psb-bl",
+					NULL, (void *)dev, &psb_ops, &props);
+	if (IS_ERR(psb_backlight_device))
+		return PTR_ERR(psb_backlight_device);
+
+	ret = psb_backlight_setup(dev);
+	if (ret < 0) {
+		backlight_device_unregister(psb_backlight_device);
+		psb_backlight_device = NULL;
+		return ret;
+	}
+	psb_backlight_device->props.brightness = 100;
+	psb_backlight_device->props.max_brightness = 100;
+	backlight_update_status(psb_backlight_device);
+	dev_priv->backlight_device = psb_backlight_device;
+	return 0;
+}
+
+#endif
+
+/*
+ *	Provide the Poulsbo specific chip logic and low level methods
+ *	for power management
+ */
+
+static void psb_init_pm(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	u32 gating = PSB_RSGX32(PSB_CR_CLKGATECTL);
+	gating &= ~3;	/* Disable 2D clock gating */
+	gating |= 1;
+	PSB_WSGX32(gating, PSB_CR_CLKGATECTL);
+	PSB_RSGX32(PSB_CR_CLKGATECTL);
+}
+
+/**
+ *	psb_save_display_registers	-	save registers lost on suspend
+ *	@dev: our DRM device
+ *
+ *	Save the state we need in order to be able to restore the interface
+ *	upon resume from suspend
+ */
+static int psb_save_display_registers(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
+	struct drm_connector *connector;
+
+	/* Display arbitration control + watermarks */
+	dev_priv->saveDSPARB = PSB_RVDC32(DSPARB);
+	dev_priv->saveDSPFW1 = PSB_RVDC32(DSPFW1);
+	dev_priv->saveDSPFW2 = PSB_RVDC32(DSPFW2);
+	dev_priv->saveDSPFW3 = PSB_RVDC32(DSPFW3);
+	dev_priv->saveDSPFW4 = PSB_RVDC32(DSPFW4);
+	dev_priv->saveDSPFW5 = PSB_RVDC32(DSPFW5);
+	dev_priv->saveDSPFW6 = PSB_RVDC32(DSPFW6);
+	dev_priv->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
+
+	/* Save crtc and output state */
+	mutex_lock(&dev->mode_config.mutex);
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		if (drm_helper_crtc_in_use(crtc))
+			crtc->funcs->save(crtc);
+	}
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		connector->funcs->save(connector);
+
+	mutex_unlock(&dev->mode_config.mutex);
+	return 0;
+}
+
+/**
+ *	psb_restore_display_registers	-	restore lost register state
+ *	@dev: our DRM device
+ *
+ *	Restore register state that was lost during suspend and resume.
+ */
+static int psb_restore_display_registers(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
+	struct drm_connector *connector;
+	int pp_stat;
+
+	/* Display arbitration + watermarks */
+	PSB_WVDC32(dev_priv->saveDSPARB, DSPARB);
+	PSB_WVDC32(dev_priv->saveDSPFW1, DSPFW1);
+	PSB_WVDC32(dev_priv->saveDSPFW2, DSPFW2);
+	PSB_WVDC32(dev_priv->saveDSPFW3, DSPFW3);
+	PSB_WVDC32(dev_priv->saveDSPFW4, DSPFW4);
+	PSB_WVDC32(dev_priv->saveDSPFW5, DSPFW5);
+	PSB_WVDC32(dev_priv->saveDSPFW6, DSPFW6);
+	PSB_WVDC32(dev_priv->saveCHICKENBIT, DSPCHICKENBIT);
+
+	/*make sure VGA plane is off. it initializes to on after reset!*/
+	PSB_WVDC32(0x80000000, VGACNTRL);
+
+	mutex_lock(&dev->mode_config.mutex);
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
+		if (drm_helper_crtc_in_use(crtc))
+			crtc->funcs->restore(crtc);
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		connector->funcs->restore(connector);
+
+	mutex_unlock(&dev->mode_config.mutex);
+
+	if (dev_priv->iLVDS_enable) {
+		/*shutdown the panel*/
+		PSB_WVDC32(0, PP_CONTROL);
+		do {
+			pp_stat = PSB_RVDC32(PP_STATUS);
+		} while (pp_stat & 0x80000000);
+
+		/* Turn off the plane */
+		PSB_WVDC32(0x58000000, DSPACNTR);
+		PSB_WVDC32(0, DSPASURF);/*trigger the plane disable*/
+		/* Wait ~4 ticks */
+		msleep(4);
+		/* Turn off pipe */
+		PSB_WVDC32(0x0, PIPEACONF);
+		/* Wait ~8 ticks */
+		msleep(8);
+
+		/* Turn off PLLs */
+		PSB_WVDC32(0, MRST_DPLL_A);
+	} else {
+		PSB_WVDC32(DPI_SHUT_DOWN, DPI_CONTROL_REG);
+		PSB_WVDC32(0x0, PIPEACONF);
+		PSB_WVDC32(0x2faf0000, BLC_PWM_CTL);
+		while (REG_READ(0x70008) & 0x40000000)
+			cpu_relax();
+		while ((PSB_RVDC32(GEN_FIFO_STAT_REG) & DPI_FIFO_EMPTY)
+			!= DPI_FIFO_EMPTY)
+			cpu_relax();
+		PSB_WVDC32(0, DEVICE_READY_REG);
+	}
+	return 0;
+}
+
+static int psb_power_down(struct drm_device *dev)
+{
+	return 0;
+}
+
+static int psb_power_up(struct drm_device *dev)
+{
+	return 0;
+}
+
+static void psb_get_core_freq(struct drm_device *dev)
+{
+	uint32_t clock;
+	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	/*pci_write_config_dword(pci_root, 0xD4, 0x00C32004);*/
+	/*pci_write_config_dword(pci_root, 0xD0, 0xE0033000);*/
+
+	pci_write_config_dword(pci_root, 0xD0, 0xD0050300);
+	pci_read_config_dword(pci_root, 0xD4, &clock);
+	pci_dev_put(pci_root);
+
+	switch (clock & 0x07) {
+	case 0:
+		dev_priv->core_freq = 100;
+		break;
+	case 1:
+		dev_priv->core_freq = 133;
+		break;
+	case 2:
+		dev_priv->core_freq = 150;
+		break;
+	case 3:
+		dev_priv->core_freq = 178;
+		break;
+	case 4:
+		dev_priv->core_freq = 200;
+		break;
+	case 5:
+	case 6:
+	case 7:
+		dev_priv->core_freq = 266;
+	default:
+		dev_priv->core_freq = 0;
+	}
+}
+
+static int psb_chip_setup(struct drm_device *dev)
+{
+	psb_get_core_freq(dev);
+	gma_intel_opregion_init(dev);
+	psb_intel_init_bios(dev);
+	return 0;
+}
+
+const struct psb_ops psb_chip_ops = {
+	.name = "Poulsbo",
+	.accel_2d = 1,
+	.pipes = 2,
+	.crtcs = 2,
+	.sgx_offset = PSB_SGX_OFFSET,
+	.chip_setup = psb_chip_setup,
+
+	.crtc_helper = &psb_intel_helper_funcs,
+	.crtc_funcs = &psb_intel_crtc_funcs,
+
+	.output_init = psb_output_init,
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+	.backlight_init = psb_backlight_init,
+#endif
+
+	.init_pm = psb_init_pm,
+	.save_regs = psb_save_display_registers,
+	.restore_regs = psb_restore_display_registers,
+	.power_down = psb_power_down,
+	.power_up = psb_power_up,
+};
+
diff --git a/drivers/gpu/drm/gma500/psb_gfx.mod.c b/drivers/gpu/drm/gma500/psb_gfx.mod.c
new file mode 100644
index 0000000..3c0bfdf
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_gfx.mod.c
@@ -0,0 +1,51 @@
+#include <linux/module.h>
+#include <linux/vermagic.h>
+#include <linux/compiler.h>
+
+MODULE_INFO(vermagic, VERMAGIC_STRING);
+
+struct module __this_module
+__attribute__((section(".gnu.linkonce.this_module"))) = {
+ .name = KBUILD_MODNAME,
+ .init = init_module,
+#ifdef CONFIG_MODULE_UNLOAD
+ .exit = cleanup_module,
+#endif
+ .arch = MODULE_ARCH_INIT,
+};
+
+MODULE_INFO(staging, "Y");
+
+static const char __module_depends[]
+__used
+__attribute__((section(".modinfo"))) =
+"depends=drm,drm_kms_helper,video,i2c-algo-bit";
+
+MODULE_ALIAS("pci:v00008086d00008108sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00008109sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00004100sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00004101sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00004102sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00004103sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00004104sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00004105sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00004106sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00004107sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00000130sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00000131sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00000132sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00000133sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00000134sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00000135sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00000136sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00000137sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00000BE0sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00000BE1sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00000BE2sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00000BE3sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00000BE4sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00000BE5sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00000BE6sv*sd*bc*sc*i*");
+MODULE_ALIAS("pci:v00008086d00000BE7sv*sd*bc*sc*i*");
+
+MODULE_INFO(srcversion, "51B3334F342F5EEAC93AF22");
diff --git a/drivers/gpu/drm/gma500/psb_intel_display.c b/drivers/gpu/drm/gma500/psb_intel_display.c
new file mode 100644
index 0000000..ab65076
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_intel_display.c
@@ -0,0 +1,1431 @@
+/*
+ * Copyright © 2006-2011 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+
+#include <drm/drmP.h>
+#include "framebuffer.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "psb_intel_display.h"
+#include "power.h"
+
+struct psb_intel_clock_t {
+	/* given values */
+	int n;
+	int m1, m2;
+	int p1, p2;
+	/* derived values */
+	int dot;
+	int vco;
+	int m;
+	int p;
+};
+
+struct psb_intel_range_t {
+	int min, max;
+};
+
+struct psb_intel_p2_t {
+	int dot_limit;
+	int p2_slow, p2_fast;
+};
+
+#define INTEL_P2_NUM		      2
+
+struct psb_intel_limit_t {
+	struct psb_intel_range_t dot, vco, n, m, m1, m2, p, p1;
+	struct psb_intel_p2_t p2;
+};
+
+#define I8XX_DOT_MIN		  25000
+#define I8XX_DOT_MAX		 350000
+#define I8XX_VCO_MIN		 930000
+#define I8XX_VCO_MAX		1400000
+#define I8XX_N_MIN		      3
+#define I8XX_N_MAX		     16
+#define I8XX_M_MIN		     96
+#define I8XX_M_MAX		    140
+#define I8XX_M1_MIN		     18
+#define I8XX_M1_MAX		     26
+#define I8XX_M2_MIN		      6
+#define I8XX_M2_MAX		     16
+#define I8XX_P_MIN		      4
+#define I8XX_P_MAX		    128
+#define I8XX_P1_MIN		      2
+#define I8XX_P1_MAX		     33
+#define I8XX_P1_LVDS_MIN	      1
+#define I8XX_P1_LVDS_MAX	      6
+#define I8XX_P2_SLOW		      4
+#define I8XX_P2_FAST		      2
+#define I8XX_P2_LVDS_SLOW	      14
+#define I8XX_P2_LVDS_FAST	      14	/* No fast option */
+#define I8XX_P2_SLOW_LIMIT	 165000
+
+#define I9XX_DOT_MIN		  20000
+#define I9XX_DOT_MAX		 400000
+#define I9XX_VCO_MIN		1400000
+#define I9XX_VCO_MAX		2800000
+#define I9XX_N_MIN		      3
+#define I9XX_N_MAX		      8
+#define I9XX_M_MIN		     70
+#define I9XX_M_MAX		    120
+#define I9XX_M1_MIN		     10
+#define I9XX_M1_MAX		     20
+#define I9XX_M2_MIN		      5
+#define I9XX_M2_MAX		      9
+#define I9XX_P_SDVO_DAC_MIN	      5
+#define I9XX_P_SDVO_DAC_MAX	     80
+#define I9XX_P_LVDS_MIN		      7
+#define I9XX_P_LVDS_MAX		     98
+#define I9XX_P1_MIN		      1
+#define I9XX_P1_MAX		      8
+#define I9XX_P2_SDVO_DAC_SLOW		     10
+#define I9XX_P2_SDVO_DAC_FAST		      5
+#define I9XX_P2_SDVO_DAC_SLOW_LIMIT	 200000
+#define I9XX_P2_LVDS_SLOW		     14
+#define I9XX_P2_LVDS_FAST		      7
+#define I9XX_P2_LVDS_SLOW_LIMIT		 112000
+
+#define INTEL_LIMIT_I8XX_DVO_DAC    0
+#define INTEL_LIMIT_I8XX_LVDS	    1
+#define INTEL_LIMIT_I9XX_SDVO_DAC   2
+#define INTEL_LIMIT_I9XX_LVDS	    3
+
+static const struct psb_intel_limit_t psb_intel_limits[] = {
+	{			/* INTEL_LIMIT_I8XX_DVO_DAC */
+	 .dot = {.min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX},
+	 .vco = {.min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX},
+	 .n = {.min = I8XX_N_MIN, .max = I8XX_N_MAX},
+	 .m = {.min = I8XX_M_MIN, .max = I8XX_M_MAX},
+	 .m1 = {.min = I8XX_M1_MIN, .max = I8XX_M1_MAX},
+	 .m2 = {.min = I8XX_M2_MIN, .max = I8XX_M2_MAX},
+	 .p = {.min = I8XX_P_MIN, .max = I8XX_P_MAX},
+	 .p1 = {.min = I8XX_P1_MIN, .max = I8XX_P1_MAX},
+	 .p2 = {.dot_limit = I8XX_P2_SLOW_LIMIT,
+		.p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST},
+	 },
+	{			/* INTEL_LIMIT_I8XX_LVDS */
+	 .dot = {.min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX},
+	 .vco = {.min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX},
+	 .n = {.min = I8XX_N_MIN, .max = I8XX_N_MAX},
+	 .m = {.min = I8XX_M_MIN, .max = I8XX_M_MAX},
+	 .m1 = {.min = I8XX_M1_MIN, .max = I8XX_M1_MAX},
+	 .m2 = {.min = I8XX_M2_MIN, .max = I8XX_M2_MAX},
+	 .p = {.min = I8XX_P_MIN, .max = I8XX_P_MAX},
+	 .p1 = {.min = I8XX_P1_LVDS_MIN, .max = I8XX_P1_LVDS_MAX},
+	 .p2 = {.dot_limit = I8XX_P2_SLOW_LIMIT,
+		.p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST},
+	 },
+	{			/* INTEL_LIMIT_I9XX_SDVO_DAC */
+	 .dot = {.min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX},
+	 .vco = {.min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX},
+	 .n = {.min = I9XX_N_MIN, .max = I9XX_N_MAX},
+	 .m = {.min = I9XX_M_MIN, .max = I9XX_M_MAX},
+	 .m1 = {.min = I9XX_M1_MIN, .max = I9XX_M1_MAX},
+	 .m2 = {.min = I9XX_M2_MIN, .max = I9XX_M2_MAX},
+	 .p = {.min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX},
+	 .p1 = {.min = I9XX_P1_MIN, .max = I9XX_P1_MAX},
+	 .p2 = {.dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
+		.p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast =
+		I9XX_P2_SDVO_DAC_FAST},
+	 },
+	{			/* INTEL_LIMIT_I9XX_LVDS */
+	 .dot = {.min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX},
+	 .vco = {.min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX},
+	 .n = {.min = I9XX_N_MIN, .max = I9XX_N_MAX},
+	 .m = {.min = I9XX_M_MIN, .max = I9XX_M_MAX},
+	 .m1 = {.min = I9XX_M1_MIN, .max = I9XX_M1_MAX},
+	 .m2 = {.min = I9XX_M2_MIN, .max = I9XX_M2_MAX},
+	 .p = {.min = I9XX_P_LVDS_MIN, .max = I9XX_P_LVDS_MAX},
+	 .p1 = {.min = I9XX_P1_MIN, .max = I9XX_P1_MAX},
+	 /* The single-channel range is 25-112Mhz, and dual-channel
+	  * is 80-224Mhz.  Prefer single channel as much as possible.
+	  */
+	 .p2 = {.dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
+		.p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST},
+	 },
+};
+
+static const struct psb_intel_limit_t *psb_intel_limit(struct drm_crtc *crtc)
+{
+	const struct psb_intel_limit_t *limit;
+
+	if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+		limit = &psb_intel_limits[INTEL_LIMIT_I9XX_LVDS];
+	else
+		limit = &psb_intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
+	return limit;
+}
+
+/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
+
+static void i8xx_clock(int refclk, struct psb_intel_clock_t *clock)
+{
+	clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
+	clock->p = clock->p1 * clock->p2;
+	clock->vco = refclk * clock->m / (clock->n + 2);
+	clock->dot = clock->vco / clock->p;
+}
+
+/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */
+
+static void i9xx_clock(int refclk, struct psb_intel_clock_t *clock)
+{
+	clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
+	clock->p = clock->p1 * clock->p2;
+	clock->vco = refclk * clock->m / (clock->n + 2);
+	clock->dot = clock->vco / clock->p;
+}
+
+static void psb_intel_clock(struct drm_device *dev, int refclk,
+			struct psb_intel_clock_t *clock)
+{
+	return i9xx_clock(refclk, clock);
+}
+
+/**
+ * Returns whether any output on the specified pipe is of the specified type
+ */
+bool psb_intel_pipe_has_type(struct drm_crtc *crtc, int type)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_connector *l_entry;
+
+	list_for_each_entry(l_entry, &mode_config->connector_list, head) {
+		if (l_entry->encoder && l_entry->encoder->crtc == crtc) {
+			struct psb_intel_output *psb_intel_output =
+			    to_psb_intel_output(l_entry);
+			if (psb_intel_output->type == type)
+				return true;
+		}
+	}
+	return false;
+}
+
+#define INTELPllInvalid(s)   { /* ErrorF (s) */; return false; }
+/**
+ * Returns whether the given set of divisors are valid for a given refclk with
+ * the given connectors.
+ */
+
+static bool psb_intel_PLL_is_valid(struct drm_crtc *crtc,
+			       struct psb_intel_clock_t *clock)
+{
+	const struct psb_intel_limit_t *limit = psb_intel_limit(crtc);
+
+	if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
+		INTELPllInvalid("p1 out of range\n");
+	if (clock->p < limit->p.min || limit->p.max < clock->p)
+		INTELPllInvalid("p out of range\n");
+	if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
+		INTELPllInvalid("m2 out of range\n");
+	if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
+		INTELPllInvalid("m1 out of range\n");
+	if (clock->m1 <= clock->m2)
+		INTELPllInvalid("m1 <= m2\n");
+	if (clock->m < limit->m.min || limit->m.max < clock->m)
+		INTELPllInvalid("m out of range\n");
+	if (clock->n < limit->n.min || limit->n.max < clock->n)
+		INTELPllInvalid("n out of range\n");
+	if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
+		INTELPllInvalid("vco out of range\n");
+	/* XXX: We may need to be checking "Dot clock"
+	 * depending on the multiplier, connector, etc.,
+	 * rather than just a single range.
+	 */
+	if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
+		INTELPllInvalid("dot out of range\n");
+
+	return true;
+}
+
+/**
+ * Returns a set of divisors for the desired target clock with the given
+ * refclk, or FALSE.  The returned values represent the clock equation:
+ * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+ */
+static bool psb_intel_find_best_PLL(struct drm_crtc *crtc, int target,
+				int refclk,
+				struct psb_intel_clock_t *best_clock)
+{
+	struct drm_device *dev = crtc->dev;
+	struct psb_intel_clock_t clock;
+	const struct psb_intel_limit_t *limit = psb_intel_limit(crtc);
+	int err = target;
+
+	if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	    (REG_READ(LVDS) & LVDS_PORT_EN) != 0) {
+		/*
+		 * For LVDS, if the panel is on, just rely on its current
+		 * settings for dual-channel.  We haven't figured out how to
+		 * reliably set up different single/dual channel state, if we
+		 * even can.
+		 */
+		if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+		    LVDS_CLKB_POWER_UP)
+			clock.p2 = limit->p2.p2_fast;
+		else
+			clock.p2 = limit->p2.p2_slow;
+	} else {
+		if (target < limit->p2.dot_limit)
+			clock.p2 = limit->p2.p2_slow;
+		else
+			clock.p2 = limit->p2.p2_fast;
+	}
+
+	memset(best_clock, 0, sizeof(*best_clock));
+
+	for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
+	     clock.m1++) {
+		for (clock.m2 = limit->m2.min;
+		     clock.m2 < clock.m1 && clock.m2 <= limit->m2.max;
+		     clock.m2++) {
+			for (clock.n = limit->n.min;
+			     clock.n <= limit->n.max; clock.n++) {
+				for (clock.p1 = limit->p1.min;
+				     clock.p1 <= limit->p1.max;
+				     clock.p1++) {
+					int this_err;
+
+					psb_intel_clock(dev, refclk, &clock);
+
+					if (!psb_intel_PLL_is_valid
+					    (crtc, &clock))
+						continue;
+
+					this_err = abs(clock.dot - target);
+					if (this_err < err) {
+						*best_clock = clock;
+						err = this_err;
+					}
+				}
+			}
+		}
+	}
+
+	return err != target;
+}
+
+void psb_intel_wait_for_vblank(struct drm_device *dev)
+{
+	/* Wait for 20ms, i.e. one cycle at 50hz. */
+	mdelay(20);
+}
+
+int psb_intel_pipe_set_base(struct drm_crtc *crtc,
+			    int x, int y, struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	/* struct drm_i915_master_private *master_priv; */
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
+	int pipe = psb_intel_crtc->pipe;
+	unsigned long start, offset;
+	int dspbase = (pipe == 0 ? DSPABASE : DSPBBASE);
+	int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
+	int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
+	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+	u32 dspcntr;
+	int ret = 0;
+
+	if (!gma_power_begin(dev, true))
+		return 0;
+
+	/* no fb bound */
+	if (!crtc->fb) {
+		dev_dbg(dev->dev, "No FB bound\n");
+		goto psb_intel_pipe_cleaner;
+	}
+
+	/* We are displaying this buffer, make sure it is actually loaded
+	   into the GTT */
+	ret = psb_gtt_pin(psbfb->gtt);
+	if (ret < 0)
+		goto psb_intel_pipe_set_base_exit;
+	start = psbfb->gtt->offset;
+
+	offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
+
+	REG_WRITE(dspstride, crtc->fb->pitch);
+
+	dspcntr = REG_READ(dspcntr_reg);
+	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+
+	switch (crtc->fb->bits_per_pixel) {
+	case 8:
+		dspcntr |= DISPPLANE_8BPP;
+		break;
+	case 16:
+		if (crtc->fb->depth == 15)
+			dspcntr |= DISPPLANE_15_16BPP;
+		else
+			dspcntr |= DISPPLANE_16BPP;
+		break;
+	case 24:
+	case 32:
+		dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+		break;
+	default:
+		dev_err(dev->dev, "Unknown color depth\n");
+		ret = -EINVAL;
+		psb_gtt_unpin(psbfb->gtt);
+		goto psb_intel_pipe_set_base_exit;
+	}
+	REG_WRITE(dspcntr_reg, dspcntr);
+
+
+	if (0 /* FIXMEAC - check what PSB needs */) {
+		REG_WRITE(dspbase, offset);
+		REG_READ(dspbase);
+		REG_WRITE(dspsurf, start);
+		REG_READ(dspsurf);
+	} else {
+		REG_WRITE(dspbase, start + offset);
+		REG_READ(dspbase);
+	}
+
+psb_intel_pipe_cleaner:
+	/* If there was a previous display we can now unpin it */
+	if (old_fb)
+		psb_gtt_unpin(to_psb_fb(old_fb)->gtt);
+
+psb_intel_pipe_set_base_exit:
+	gma_power_end(dev);
+	return ret;
+}
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ *
+ * This code should probably grow support for turning the cursor off and back
+ * on appropriately at the same time as we're turning the pipe off/on.
+ */
+static void psb_intel_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct drm_device *dev = crtc->dev;
+	/* struct drm_i915_master_private *master_priv; */
+	/* struct drm_i915_private *dev_priv = dev->dev_private; */
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int pipe = psb_intel_crtc->pipe;
+	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+	int dspbase_reg = (pipe == 0) ? DSPABASE : DSPBBASE;
+	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+	u32 temp;
+	bool enabled;
+
+	/* XXX: When our outputs are all unaware of DPMS modes other than off
+	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+	 */
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+		/* Enable the DPLL */
+		temp = REG_READ(dpll_reg);
+		if ((temp & DPLL_VCO_ENABLE) == 0) {
+			REG_WRITE(dpll_reg, temp);
+			REG_READ(dpll_reg);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+			REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+			REG_READ(dpll_reg);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+			REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+			REG_READ(dpll_reg);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+		}
+
+		/* Enable the pipe */
+		temp = REG_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_ENABLE) == 0)
+			REG_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
+
+		/* Enable the plane */
+		temp = REG_READ(dspcntr_reg);
+		if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+			REG_WRITE(dspcntr_reg,
+				  temp | DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+		}
+
+		psb_intel_crtc_load_lut(crtc);
+
+		/* Give the overlay scaler a chance to enable
+		 * if it's on this pipe */
+		/* psb_intel_crtc_dpms_video(crtc, true); TODO */
+		break;
+	case DRM_MODE_DPMS_OFF:
+		/* Give the overlay scaler a chance to disable
+		 * if it's on this pipe */
+		/* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
+
+		/* Disable the VGA plane that we never use */
+		REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+
+		/* Disable display plane */
+		temp = REG_READ(dspcntr_reg);
+		if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+			REG_WRITE(dspcntr_reg,
+				  temp & ~DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+			REG_READ(dspbase_reg);
+		}
+
+		/* Next, disable display pipes */
+		temp = REG_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_ENABLE) != 0) {
+			REG_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
+			REG_READ(pipeconf_reg);
+		}
+
+		/* Wait for vblank for the disable to take effect. */
+		psb_intel_wait_for_vblank(dev);
+
+		temp = REG_READ(dpll_reg);
+		if ((temp & DPLL_VCO_ENABLE) != 0) {
+			REG_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
+			REG_READ(dpll_reg);
+		}
+
+		/* Wait for the clocks to turn off. */
+		udelay(150);
+		break;
+	}
+
+	enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
+
+	/*Set FIFO Watermarks*/
+	REG_WRITE(DSPARB, 0x3F3E);
+}
+
+static void psb_intel_crtc_prepare(struct drm_crtc *crtc)
+{
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+static void psb_intel_crtc_commit(struct drm_crtc *crtc)
+{
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+void psb_intel_encoder_prepare(struct drm_encoder *encoder)
+{
+	struct drm_encoder_helper_funcs *encoder_funcs =
+	    encoder->helper_private;
+	/* lvds has its own version of prepare see psb_intel_lvds_prepare */
+	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+void psb_intel_encoder_commit(struct drm_encoder *encoder)
+{
+	struct drm_encoder_helper_funcs *encoder_funcs =
+	    encoder->helper_private;
+	/* lvds has its own version of commit see psb_intel_lvds_commit */
+	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+}
+
+static bool psb_intel_crtc_mode_fixup(struct drm_crtc *crtc,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+
+/**
+ * Return the pipe currently connected to the panel fitter,
+ * or -1 if the panel fitter is not present or not in use
+ */
+static int psb_intel_panel_fitter_pipe(struct drm_device *dev)
+{
+	u32 pfit_control;
+
+	pfit_control = REG_READ(PFIT_CONTROL);
+
+	/* See if the panel fitter is in use */
+	if ((pfit_control & PFIT_ENABLE) == 0)
+		return -1;
+	/* Must be on PIPE 1 for PSB */
+	return 1;
+}
+
+static int psb_intel_crtc_mode_set(struct drm_crtc *crtc,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode,
+			       int x, int y,
+			       struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	int pipe = psb_intel_crtc->pipe;
+	int fp_reg = (pipe == 0) ? FPA0 : FPB0;
+	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+	int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
+	int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
+	int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
+	int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
+	int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
+	int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
+	int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
+	int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
+	int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
+	int refclk;
+	struct psb_intel_clock_t clock;
+	u32 dpll = 0, fp = 0, dspcntr, pipeconf;
+	bool ok, is_sdvo = false, is_dvo = false;
+	bool is_crt = false, is_lvds = false, is_tv = false;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_connector *connector;
+
+	/* No scan out no play */
+	if (crtc->fb == NULL) {
+		crtc_funcs->mode_set_base(crtc, x, y, old_fb);
+		return 0;
+	}
+
+	list_for_each_entry(connector, &mode_config->connector_list, head) {
+		struct psb_intel_output *psb_intel_output =
+		    to_psb_intel_output(connector);
+
+		if (!connector->encoder
+		    || connector->encoder->crtc != crtc)
+			continue;
+
+		switch (psb_intel_output->type) {
+		case INTEL_OUTPUT_LVDS:
+			is_lvds = true;
+			break;
+		case INTEL_OUTPUT_SDVO:
+			is_sdvo = true;
+			break;
+		case INTEL_OUTPUT_DVO:
+			is_dvo = true;
+			break;
+		case INTEL_OUTPUT_TVOUT:
+			is_tv = true;
+			break;
+		case INTEL_OUTPUT_ANALOG:
+			is_crt = true;
+			break;
+		}
+	}
+
+	refclk = 96000;
+
+	ok = psb_intel_find_best_PLL(crtc, adjusted_mode->clock, refclk,
+				 &clock);
+	if (!ok) {
+		dev_err(dev->dev, "Couldn't find PLL settings for mode!\n");
+		return 0;
+	}
+
+	fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
+
+	dpll = DPLL_VGA_MODE_DIS;
+	if (is_lvds) {
+		dpll |= DPLLB_MODE_LVDS;
+		dpll |= DPLL_DVO_HIGH_SPEED;
+	} else
+		dpll |= DPLLB_MODE_DAC_SERIAL;
+	if (is_sdvo) {
+		int sdvo_pixel_multiply =
+			    adjusted_mode->clock / mode->clock;
+		dpll |= DPLL_DVO_HIGH_SPEED;
+		dpll |=
+		    (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+	}
+
+	/* compute bitmask from p1 value */
+	dpll |= (1 << (clock.p1 - 1)) << 16;
+	switch (clock.p2) {
+	case 5:
+		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+		break;
+	case 7:
+		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+		break;
+	case 10:
+		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+		break;
+	case 14:
+		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+		break;
+	}
+
+	if (is_tv) {
+		/* XXX: just matching BIOS for now */
+/*	dpll |= PLL_REF_INPUT_TVCLKINBC; */
+		dpll |= 3;
+	}
+	dpll |= PLL_REF_INPUT_DREFCLK;
+
+	/* setup pipeconf */
+	pipeconf = REG_READ(pipeconf_reg);
+
+	/* Set up the display plane register */
+	dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+	if (pipe == 0)
+		dspcntr |= DISPPLANE_SEL_PIPE_A;
+	else
+		dspcntr |= DISPPLANE_SEL_PIPE_B;
+
+	dspcntr |= DISPLAY_PLANE_ENABLE;
+	pipeconf |= PIPEACONF_ENABLE;
+	dpll |= DPLL_VCO_ENABLE;
+
+
+	/* Disable the panel fitter if it was on our pipe */
+	if (psb_intel_panel_fitter_pipe(dev) == pipe)
+		REG_WRITE(PFIT_CONTROL, 0);
+
+	drm_mode_debug_printmodeline(mode);
+
+	if (dpll & DPLL_VCO_ENABLE) {
+		REG_WRITE(fp_reg, fp);
+		REG_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
+		REG_READ(dpll_reg);
+		udelay(150);
+	}
+
+	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
+	 * This is an exception to the general rule that mode_set doesn't turn
+	 * things on.
+	 */
+	if (is_lvds) {
+		u32 lvds = REG_READ(LVDS);
+
+		lvds &= ~LVDS_PIPEB_SELECT;
+		if (pipe == 1)
+			lvds |= LVDS_PIPEB_SELECT;
+
+		lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+		/* Set the B0-B3 data pairs corresponding to
+		 * whether we're going to
+		 * set the DPLLs for dual-channel mode or not.
+		 */
+		lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+		if (clock.p2 == 7)
+			lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+
+		/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+		 * appropriately here, but we need to look more
+		 * thoroughly into how panels behave in the two modes.
+		 */
+
+		REG_WRITE(LVDS, lvds);
+		REG_READ(LVDS);
+	}
+
+	REG_WRITE(fp_reg, fp);
+	REG_WRITE(dpll_reg, dpll);
+	REG_READ(dpll_reg);
+	/* Wait for the clocks to stabilize. */
+	udelay(150);
+
+	/* write it again -- the BIOS does, after all */
+	REG_WRITE(dpll_reg, dpll);
+
+	REG_READ(dpll_reg);
+	/* Wait for the clocks to stabilize. */
+	udelay(150);
+
+	REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
+		  ((adjusted_mode->crtc_htotal - 1) << 16));
+	REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
+		  ((adjusted_mode->crtc_hblank_end - 1) << 16));
+	REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
+		  ((adjusted_mode->crtc_hsync_end - 1) << 16));
+	REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
+		  ((adjusted_mode->crtc_vtotal - 1) << 16));
+	REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
+		  ((adjusted_mode->crtc_vblank_end - 1) << 16));
+	REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
+		  ((adjusted_mode->crtc_vsync_end - 1) << 16));
+	/* pipesrc and dspsize control the size that is scaled from,
+	 * which should always be the user's requested size.
+	 */
+	REG_WRITE(dspsize_reg,
+		  ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
+	REG_WRITE(dsppos_reg, 0);
+	REG_WRITE(pipesrc_reg,
+		  ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+	REG_WRITE(pipeconf_reg, pipeconf);
+	REG_READ(pipeconf_reg);
+
+	psb_intel_wait_for_vblank(dev);
+
+	REG_WRITE(dspcntr_reg, dspcntr);
+
+	/* Flush the plane changes */
+	crtc_funcs->mode_set_base(crtc, x, y, old_fb);
+
+	psb_intel_wait_for_vblank(dev);
+
+	return 0;
+}
+
+/** Loads the palette/gamma unit for the CRTC with the prepared values */
+void psb_intel_crtc_load_lut(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_psb_private *dev_priv =
+				(struct drm_psb_private *)dev->dev_private;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int palreg = PALETTE_A;
+	int i;
+
+	/* The clocks have to be on to load the palette. */
+	if (!crtc->enabled)
+		return;
+
+	switch (psb_intel_crtc->pipe) {
+	case 0:
+		break;
+	case 1:
+		palreg = PALETTE_B;
+		break;
+	case 2:
+		palreg = PALETTE_C;
+		break;
+	default:
+		dev_err(dev->dev, "Illegal Pipe Number.\n");
+		return;
+	}
+
+	if (gma_power_begin(dev, false)) {
+		for (i = 0; i < 256; i++) {
+			REG_WRITE(palreg + 4 * i,
+				  ((psb_intel_crtc->lut_r[i] +
+				  psb_intel_crtc->lut_adj[i]) << 16) |
+				  ((psb_intel_crtc->lut_g[i] +
+				  psb_intel_crtc->lut_adj[i]) << 8) |
+				  (psb_intel_crtc->lut_b[i] +
+				  psb_intel_crtc->lut_adj[i]));
+		}
+		gma_power_end(dev);
+	} else {
+		for (i = 0; i < 256; i++) {
+			dev_priv->save_palette_a[i] =
+				  ((psb_intel_crtc->lut_r[i] +
+				  psb_intel_crtc->lut_adj[i]) << 16) |
+				  ((psb_intel_crtc->lut_g[i] +
+				  psb_intel_crtc->lut_adj[i]) << 8) |
+				  (psb_intel_crtc->lut_b[i] +
+				  psb_intel_crtc->lut_adj[i]);
+		}
+
+	}
+}
+
+/**
+ * Save HW states of giving crtc
+ */
+static void psb_intel_crtc_save(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	/* struct drm_psb_private *dev_priv =
+			(struct drm_psb_private *)dev->dev_private; */
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state;
+	int pipeA = (psb_intel_crtc->pipe == 0);
+	uint32_t paletteReg;
+	int i;
+
+	if (!crtc_state) {
+		dev_err(dev->dev, "No CRTC state found\n");
+		return;
+	}
+
+	crtc_state->saveDSPCNTR = REG_READ(pipeA ? DSPACNTR : DSPBCNTR);
+	crtc_state->savePIPECONF = REG_READ(pipeA ? PIPEACONF : PIPEBCONF);
+	crtc_state->savePIPESRC = REG_READ(pipeA ? PIPEASRC : PIPEBSRC);
+	crtc_state->saveFP0 = REG_READ(pipeA ? FPA0 : FPB0);
+	crtc_state->saveFP1 = REG_READ(pipeA ? FPA1 : FPB1);
+	crtc_state->saveDPLL = REG_READ(pipeA ? DPLL_A : DPLL_B);
+	crtc_state->saveHTOTAL = REG_READ(pipeA ? HTOTAL_A : HTOTAL_B);
+	crtc_state->saveHBLANK = REG_READ(pipeA ? HBLANK_A : HBLANK_B);
+	crtc_state->saveHSYNC = REG_READ(pipeA ? HSYNC_A : HSYNC_B);
+	crtc_state->saveVTOTAL = REG_READ(pipeA ? VTOTAL_A : VTOTAL_B);
+	crtc_state->saveVBLANK = REG_READ(pipeA ? VBLANK_A : VBLANK_B);
+	crtc_state->saveVSYNC = REG_READ(pipeA ? VSYNC_A : VSYNC_B);
+	crtc_state->saveDSPSTRIDE = REG_READ(pipeA ? DSPASTRIDE : DSPBSTRIDE);
+
+	/*NOTE: DSPSIZE DSPPOS only for psb*/
+	crtc_state->saveDSPSIZE = REG_READ(pipeA ? DSPASIZE : DSPBSIZE);
+	crtc_state->saveDSPPOS = REG_READ(pipeA ? DSPAPOS : DSPBPOS);
+
+	crtc_state->saveDSPBASE = REG_READ(pipeA ? DSPABASE : DSPBBASE);
+
+	paletteReg = pipeA ? PALETTE_A : PALETTE_B;
+	for (i = 0; i < 256; ++i)
+		crtc_state->savePalette[i] = REG_READ(paletteReg + (i << 2));
+}
+
+/**
+ * Restore HW states of giving crtc
+ */
+static void psb_intel_crtc_restore(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	/* struct drm_psb_private * dev_priv =
+				(struct drm_psb_private *)dev->dev_private; */
+	struct psb_intel_crtc *psb_intel_crtc =  to_psb_intel_crtc(crtc);
+	struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state;
+	/* struct drm_crtc_helper_funcs * crtc_funcs = crtc->helper_private; */
+	int pipeA = (psb_intel_crtc->pipe == 0);
+	uint32_t paletteReg;
+	int i;
+
+	if (!crtc_state) {
+		dev_err(dev->dev, "No crtc state\n");
+		return;
+	}
+
+	if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) {
+		REG_WRITE(pipeA ? DPLL_A : DPLL_B,
+			crtc_state->saveDPLL & ~DPLL_VCO_ENABLE);
+		REG_READ(pipeA ? DPLL_A : DPLL_B);
+		udelay(150);
+	}
+
+	REG_WRITE(pipeA ? FPA0 : FPB0, crtc_state->saveFP0);
+	REG_READ(pipeA ? FPA0 : FPB0);
+
+	REG_WRITE(pipeA ? FPA1 : FPB1, crtc_state->saveFP1);
+	REG_READ(pipeA ? FPA1 : FPB1);
+
+	REG_WRITE(pipeA ? DPLL_A : DPLL_B, crtc_state->saveDPLL);
+	REG_READ(pipeA ? DPLL_A : DPLL_B);
+	udelay(150);
+
+	REG_WRITE(pipeA ? HTOTAL_A : HTOTAL_B, crtc_state->saveHTOTAL);
+	REG_WRITE(pipeA ? HBLANK_A : HBLANK_B, crtc_state->saveHBLANK);
+	REG_WRITE(pipeA ? HSYNC_A : HSYNC_B, crtc_state->saveHSYNC);
+	REG_WRITE(pipeA ? VTOTAL_A : VTOTAL_B, crtc_state->saveVTOTAL);
+	REG_WRITE(pipeA ? VBLANK_A : VBLANK_B, crtc_state->saveVBLANK);
+	REG_WRITE(pipeA ? VSYNC_A : VSYNC_B, crtc_state->saveVSYNC);
+	REG_WRITE(pipeA ? DSPASTRIDE : DSPBSTRIDE, crtc_state->saveDSPSTRIDE);
+
+	REG_WRITE(pipeA ? DSPASIZE : DSPBSIZE, crtc_state->saveDSPSIZE);
+	REG_WRITE(pipeA ? DSPAPOS : DSPBPOS, crtc_state->saveDSPPOS);
+
+	REG_WRITE(pipeA ? PIPEASRC : PIPEBSRC, crtc_state->savePIPESRC);
+	REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE);
+	REG_WRITE(pipeA ? PIPEACONF : PIPEBCONF, crtc_state->savePIPECONF);
+
+	psb_intel_wait_for_vblank(dev);
+
+	REG_WRITE(pipeA ? DSPACNTR : DSPBCNTR, crtc_state->saveDSPCNTR);
+	REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE);
+
+	psb_intel_wait_for_vblank(dev);
+
+	paletteReg = pipeA ? PALETTE_A : PALETTE_B;
+	for (i = 0; i < 256; ++i)
+		REG_WRITE(paletteReg + (i << 2), crtc_state->savePalette[i]);
+}
+
+static int psb_intel_crtc_cursor_set(struct drm_crtc *crtc,
+				 struct drm_file *file_priv,
+				 uint32_t handle,
+				 uint32_t width, uint32_t height)
+{
+	struct drm_device *dev = crtc->dev;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int pipe = psb_intel_crtc->pipe;
+	uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
+	uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
+	uint32_t temp;
+	size_t addr = 0;
+	struct gtt_range *gt;
+	struct drm_gem_object *obj;
+	int ret;
+
+	/* if we want to turn of the cursor ignore width and height */
+	if (!handle) {
+		/* turn off the cursor */
+		temp = CURSOR_MODE_DISABLE;
+
+		if (gma_power_begin(dev, false)) {
+			REG_WRITE(control, temp);
+			REG_WRITE(base, 0);
+			gma_power_end(dev);
+		}
+
+		/* Unpin the old GEM object */
+		if (psb_intel_crtc->cursor_obj) {
+			gt = container_of(psb_intel_crtc->cursor_obj,
+							struct gtt_range, gem);
+			psb_gtt_unpin(gt);
+			drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
+			psb_intel_crtc->cursor_obj = NULL;
+		}
+
+		return 0;
+	}
+
+	/* Currently we only support 64x64 cursors */
+	if (width != 64 || height != 64) {
+		dev_dbg(dev->dev, "we currently only support 64x64 cursors\n");
+		return -EINVAL;
+	}
+
+	obj = drm_gem_object_lookup(dev, file_priv, handle);
+	if (!obj)
+		return -ENOENT;
+
+	if (obj->size < width * height * 4) {
+		dev_dbg(dev->dev, "buffer is to small\n");
+		return -ENOMEM;
+	}
+
+	gt = container_of(obj, struct gtt_range, gem);
+
+	/* Pin the memory into the GTT */
+	ret = psb_gtt_pin(gt);
+	if (ret) {
+		dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
+		return ret;
+	}
+
+
+	addr = gt->offset;	/* Or resource.start ??? */
+
+	psb_intel_crtc->cursor_addr = addr;
+
+	temp = 0;
+	/* set the pipe for the cursor */
+	temp |= (pipe << 28);
+	temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+
+	if (gma_power_begin(dev, false)) {
+		REG_WRITE(control, temp);
+		REG_WRITE(base, addr);
+		gma_power_end(dev);
+	}
+
+	/* unpin the old bo */
+	if (psb_intel_crtc->cursor_obj) {
+		gt = container_of(psb_intel_crtc->cursor_obj,
+							struct gtt_range, gem);
+		psb_gtt_unpin(gt);
+		drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
+		psb_intel_crtc->cursor_obj = obj;
+	}
+	return 0;
+}
+
+static int psb_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
+{
+	struct drm_device *dev = crtc->dev;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int pipe = psb_intel_crtc->pipe;
+	uint32_t temp = 0;
+	uint32_t addr;
+
+
+	if (x < 0) {
+		temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
+		x = -x;
+	}
+	if (y < 0) {
+		temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
+		y = -y;
+	}
+
+	temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
+	temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
+
+	addr = psb_intel_crtc->cursor_addr;
+
+	if (gma_power_begin(dev, false)) {
+		REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
+		REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr);
+		gma_power_end(dev);
+	}
+	return 0;
+}
+
+void psb_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red,
+			 u16 *green, u16 *blue, uint32_t type, uint32_t size)
+{
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int i;
+
+	if (size != 256)
+		return;
+
+	for (i = 0; i < 256; i++) {
+		psb_intel_crtc->lut_r[i] = red[i] >> 8;
+		psb_intel_crtc->lut_g[i] = green[i] >> 8;
+		psb_intel_crtc->lut_b[i] = blue[i] >> 8;
+	}
+
+	psb_intel_crtc_load_lut(crtc);
+}
+
+static int psb_crtc_set_config(struct drm_mode_set *set)
+{
+	int ret;
+	struct drm_device *dev = set->crtc->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (!dev_priv->rpm_enabled)
+		return drm_crtc_helper_set_config(set);
+
+	pm_runtime_forbid(&dev->pdev->dev);
+	ret = drm_crtc_helper_set_config(set);
+	pm_runtime_allow(&dev->pdev->dev);
+	return ret;
+}
+
+/* Returns the clock of the currently programmed mode of the given pipe. */
+static int psb_intel_crtc_clock_get(struct drm_device *dev,
+				struct drm_crtc *crtc)
+{
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int pipe = psb_intel_crtc->pipe;
+	u32 dpll;
+	u32 fp;
+	struct psb_intel_clock_t clock;
+	bool is_lvds;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (gma_power_begin(dev, false)) {
+		dpll = REG_READ((pipe == 0) ? DPLL_A : DPLL_B);
+		if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
+			fp = REG_READ((pipe == 0) ? FPA0 : FPB0);
+		else
+			fp = REG_READ((pipe == 0) ? FPA1 : FPB1);
+		is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN);
+		gma_power_end(dev);
+	} else {
+		dpll = (pipe == 0) ?
+			dev_priv->saveDPLL_A : dev_priv->saveDPLL_B;
+
+		if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
+			fp = (pipe == 0) ?
+				dev_priv->saveFPA0 :
+				dev_priv->saveFPB0;
+		else
+			fp = (pipe == 0) ?
+				dev_priv->saveFPA1 :
+				dev_priv->saveFPB1;
+
+		is_lvds = (pipe == 1) && (dev_priv->saveLVDS & LVDS_PORT_EN);
+	}
+
+	clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
+	clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
+	clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
+
+	if (is_lvds) {
+		clock.p1 =
+		    ffs((dpll &
+			 DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
+			DPLL_FPA01_P1_POST_DIV_SHIFT);
+		clock.p2 = 14;
+
+		if ((dpll & PLL_REF_INPUT_MASK) ==
+		    PLLB_REF_INPUT_SPREADSPECTRUMIN) {
+			/* XXX: might not be 66MHz */
+			i8xx_clock(66000, &clock);
+		} else
+			i8xx_clock(48000, &clock);
+	} else {
+		if (dpll & PLL_P1_DIVIDE_BY_TWO)
+			clock.p1 = 2;
+		else {
+			clock.p1 =
+			    ((dpll &
+			      DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
+			     DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
+		}
+		if (dpll & PLL_P2_DIVIDE_BY_4)
+			clock.p2 = 4;
+		else
+			clock.p2 = 2;
+
+		i8xx_clock(48000, &clock);
+	}
+
+	/* XXX: It would be nice to validate the clocks, but we can't reuse
+	 * i830PllIsValid() because it relies on the xf86_config connector
+	 * configuration being accurate, which it isn't necessarily.
+	 */
+
+	return clock.dot;
+}
+
+/** Returns the currently programmed mode of the given pipe. */
+struct drm_display_mode *psb_intel_crtc_mode_get(struct drm_device *dev,
+					     struct drm_crtc *crtc)
+{
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int pipe = psb_intel_crtc->pipe;
+	struct drm_display_mode *mode;
+	int htot;
+	int hsync;
+	int vtot;
+	int vsync;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (gma_power_begin(dev, false)) {
+		htot = REG_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B);
+		hsync = REG_READ((pipe == 0) ? HSYNC_A : HSYNC_B);
+		vtot = REG_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B);
+		vsync = REG_READ((pipe == 0) ? VSYNC_A : VSYNC_B);
+		gma_power_end(dev);
+	} else {
+		htot = (pipe == 0) ?
+			dev_priv->saveHTOTAL_A : dev_priv->saveHTOTAL_B;
+		hsync = (pipe == 0) ?
+			dev_priv->saveHSYNC_A : dev_priv->saveHSYNC_B;
+		vtot = (pipe == 0) ?
+			dev_priv->saveVTOTAL_A : dev_priv->saveVTOTAL_B;
+		vsync = (pipe == 0) ?
+			dev_priv->saveVSYNC_A : dev_priv->saveVSYNC_B;
+	}
+
+	mode = kzalloc(sizeof(*mode), GFP_KERNEL);
+	if (!mode)
+		return NULL;
+
+	mode->clock = psb_intel_crtc_clock_get(dev, crtc);
+	mode->hdisplay = (htot & 0xffff) + 1;
+	mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
+	mode->hsync_start = (hsync & 0xffff) + 1;
+	mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
+	mode->vdisplay = (vtot & 0xffff) + 1;
+	mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
+	mode->vsync_start = (vsync & 0xffff) + 1;
+	mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
+
+	drm_mode_set_name(mode);
+	drm_mode_set_crtcinfo(mode, 0);
+
+	return mode;
+}
+
+void psb_intel_crtc_destroy(struct drm_crtc *crtc)
+{
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	struct gtt_range *gt;
+
+	/* Unpin the old GEM object */
+	if (psb_intel_crtc->cursor_obj) {
+		gt = container_of(psb_intel_crtc->cursor_obj,
+						struct gtt_range, gem);
+		psb_gtt_unpin(gt);
+		drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
+		psb_intel_crtc->cursor_obj = NULL;
+	}
+	kfree(psb_intel_crtc->crtc_state);
+	drm_crtc_cleanup(crtc);
+	kfree(psb_intel_crtc);
+}
+
+const struct drm_crtc_helper_funcs psb_intel_helper_funcs = {
+	.dpms = psb_intel_crtc_dpms,
+	.mode_fixup = psb_intel_crtc_mode_fixup,
+	.mode_set = psb_intel_crtc_mode_set,
+	.mode_set_base = psb_intel_pipe_set_base,
+	.prepare = psb_intel_crtc_prepare,
+	.commit = psb_intel_crtc_commit,
+};
+
+const struct drm_crtc_funcs psb_intel_crtc_funcs = {
+	.save = psb_intel_crtc_save,
+	.restore = psb_intel_crtc_restore,
+	.cursor_set = psb_intel_crtc_cursor_set,
+	.cursor_move = psb_intel_crtc_cursor_move,
+	.gamma_set = psb_intel_crtc_gamma_set,
+	.set_config = psb_crtc_set_config,
+	.destroy = psb_intel_crtc_destroy,
+};
+
+/*
+ * Set the default value of cursor control and base register
+ * to zero. This is a workaround for h/w defect on Oaktrail
+ */
+static void psb_intel_cursor_init(struct drm_device *dev, int pipe)
+{
+	u32 control[3] = { CURACNTR, CURBCNTR, CURCCNTR };
+	u32 base[3] = { CURABASE, CURBBASE, CURCBASE };
+
+	REG_WRITE(control[pipe], 0);
+	REG_WRITE(base[pipe], 0);
+}
+
+void psb_intel_crtc_init(struct drm_device *dev, int pipe,
+		     struct psb_intel_mode_device *mode_dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct psb_intel_crtc *psb_intel_crtc;
+	int i;
+	uint16_t *r_base, *g_base, *b_base;
+
+	/* We allocate a extra array of drm_connector pointers
+	 * for fbdev after the crtc */
+	psb_intel_crtc =
+	    kzalloc(sizeof(struct psb_intel_crtc) +
+		    (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)),
+		    GFP_KERNEL);
+	if (psb_intel_crtc == NULL)
+		return;
+
+	psb_intel_crtc->crtc_state =
+		kzalloc(sizeof(struct psb_intel_crtc_state), GFP_KERNEL);
+	if (!psb_intel_crtc->crtc_state) {
+		dev_err(dev->dev, "Crtc state error: No memory\n");
+		kfree(psb_intel_crtc);
+		return;
+	}
+
+	/* Set the CRTC operations from the chip specific data */
+	drm_crtc_init(dev, &psb_intel_crtc->base, dev_priv->ops->crtc_funcs);
+
+	drm_mode_crtc_set_gamma_size(&psb_intel_crtc->base, 256);
+	psb_intel_crtc->pipe = pipe;
+	psb_intel_crtc->plane = pipe;
+
+	r_base = psb_intel_crtc->base.gamma_store;
+	g_base = r_base + 256;
+	b_base = g_base + 256;
+	for (i = 0; i < 256; i++) {
+		psb_intel_crtc->lut_r[i] = i;
+		psb_intel_crtc->lut_g[i] = i;
+		psb_intel_crtc->lut_b[i] = i;
+		r_base[i] = i << 8;
+		g_base[i] = i << 8;
+		b_base[i] = i << 8;
+
+		psb_intel_crtc->lut_adj[i] = 0;
+	}
+
+	psb_intel_crtc->mode_dev = mode_dev;
+	psb_intel_crtc->cursor_addr = 0;
+
+	drm_crtc_helper_add(&psb_intel_crtc->base,
+						dev_priv->ops->crtc_helper);
+
+	/* Setup the array of drm_connector pointer array */
+	psb_intel_crtc->mode_set.crtc = &psb_intel_crtc->base;
+	BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
+	       dev_priv->plane_to_crtc_mapping[psb_intel_crtc->plane] != NULL);
+	dev_priv->plane_to_crtc_mapping[psb_intel_crtc->plane] =
+							&psb_intel_crtc->base;
+	dev_priv->pipe_to_crtc_mapping[psb_intel_crtc->pipe] =
+							&psb_intel_crtc->base;
+	psb_intel_crtc->mode_set.connectors =
+	    (struct drm_connector **) (psb_intel_crtc + 1);
+	psb_intel_crtc->mode_set.num_connectors = 0;
+	psb_intel_cursor_init(dev, pipe);
+}
+
+int psb_intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+				struct drm_file *file_priv)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct drm_psb_get_pipe_from_crtc_id_arg *pipe_from_crtc_id = data;
+	struct drm_mode_object *drmmode_obj;
+	struct psb_intel_crtc *crtc;
+
+	if (!dev_priv) {
+		dev_err(dev->dev, "called with no initialization\n");
+		return -EINVAL;
+	}
+
+	drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
+			DRM_MODE_OBJECT_CRTC);
+
+	if (!drmmode_obj) {
+		dev_err(dev->dev, "no such CRTC id\n");
+		return -EINVAL;
+	}
+
+	crtc = to_psb_intel_crtc(obj_to_crtc(drmmode_obj));
+	pipe_from_crtc_id->pipe = crtc->pipe;
+
+	return 0;
+}
+
+struct drm_crtc *psb_intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
+{
+	struct drm_crtc *crtc = NULL;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+		if (psb_intel_crtc->pipe == pipe)
+			break;
+	}
+	return crtc;
+}
+
+int psb_intel_connector_clones(struct drm_device *dev, int type_mask)
+{
+	int index_mask = 0;
+	struct drm_connector *connector;
+	int entry = 0;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list,
+			    head) {
+		struct psb_intel_output *psb_intel_output =
+		    to_psb_intel_output(connector);
+		if (type_mask & (1 << psb_intel_output->type))
+			index_mask |= (1 << entry);
+		entry++;
+	}
+	return index_mask;
+}
+
+
+void psb_intel_modeset_cleanup(struct drm_device *dev)
+{
+	drm_mode_config_cleanup(dev);
+}
+
+
+/* current intel driver doesn't take advantage of encoders
+   always give back the encoder for the connector
+*/
+struct drm_encoder *psb_intel_best_encoder(struct drm_connector *connector)
+{
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+
+	return &psb_intel_output->enc;
+}
+
diff --git a/drivers/gpu/drm/gma500/psb_intel_display.h b/drivers/gpu/drm/gma500/psb_intel_display.h
new file mode 100644
index 0000000..535b49a
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_intel_display.h
@@ -0,0 +1,28 @@
+/* copyright (c) 2008, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ * Eric Anholt <eric@anholt.net>
+ */
+
+#ifndef _INTEL_DISPLAY_H_
+#define _INTEL_DISPLAY_H_
+
+bool psb_intel_pipe_has_type(struct drm_crtc *crtc, int type);
+void psb_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red,
+			 u16 *green, u16 *blue, uint32_t type, uint32_t size);
+void psb_intel_crtc_destroy(struct drm_crtc *crtc);
+
+#endif
diff --git a/drivers/gpu/drm/gma500/psb_intel_drv.h b/drivers/gpu/drm/gma500/psb_intel_drv.h
new file mode 100644
index 0000000..ac953ca
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_intel_drv.h
@@ -0,0 +1,228 @@
+/*
+ * Copyright (c) 2009-2011, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __INTEL_DRV_H__
+#define __INTEL_DRV_H__
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <linux/gpio.h>
+
+/*
+ * Display related stuff
+ */
+
+/* store information about an Ixxx DVO */
+/* The i830->i865 use multiple DVOs with multiple i2cs */
+/* the i915, i945 have a single sDVO i2c bus - which is different */
+#define MAX_OUTPUTS 6
+/* maximum connectors per crtcs in the mode set */
+#define INTELFB_CONN_LIMIT 4
+
+#define INTEL_I2C_BUS_DVO 1
+#define INTEL_I2C_BUS_SDVO 2
+
+/* these are outputs from the chip - integrated only
+ * external chips are via DVO or SDVO output */
+#define INTEL_OUTPUT_UNUSED 0
+#define INTEL_OUTPUT_ANALOG 1
+#define INTEL_OUTPUT_DVO 2
+#define INTEL_OUTPUT_SDVO 3
+#define INTEL_OUTPUT_LVDS 4
+#define INTEL_OUTPUT_TVOUT 5
+#define INTEL_OUTPUT_HDMI 6
+#define INTEL_OUTPUT_MIPI 7
+#define INTEL_OUTPUT_MIPI2 8
+
+#define INTEL_DVO_CHIP_NONE 0
+#define INTEL_DVO_CHIP_LVDS 1
+#define INTEL_DVO_CHIP_TMDS 2
+#define INTEL_DVO_CHIP_TVOUT 4
+
+/*
+ * Hold information useally put on the device driver privates here,
+ * since it needs to be shared across multiple of devices drivers privates.
+ */
+struct psb_intel_mode_device {
+
+	/*
+	 * Abstracted memory manager operations
+	 */
+	 size_t(*bo_offset) (struct drm_device *dev, void *bo);
+
+	/*
+	 * Cursor (Can go ?)
+	 */
+	int cursor_needs_physical;
+
+	/*
+	 * LVDS info
+	 */
+	int backlight_duty_cycle;	/* restore backlight to this value */
+	bool panel_wants_dither;
+	struct drm_display_mode *panel_fixed_mode;
+	struct drm_display_mode *panel_fixed_mode2;
+	struct drm_display_mode *vbt_mode;	/* if any */
+
+	uint32_t saveBLC_PWM_CTL;
+};
+
+struct psb_intel_i2c_chan {
+	/* for getting at dev. private (mmio etc.) */
+	struct drm_device *drm_dev;
+	u32 reg;		/* GPIO reg */
+	struct i2c_adapter adapter;
+	struct i2c_algo_bit_data algo;
+	u8 slave_addr;
+};
+
+struct psb_intel_output {
+	struct drm_connector base;
+
+	struct drm_encoder enc;
+	int type;
+
+	struct psb_intel_i2c_chan *i2c_bus;	/* for control functions */
+	struct psb_intel_i2c_chan *ddc_bus;	/* for DDC only stuff */
+	bool load_detect_temp;
+	void *dev_priv;
+
+	struct psb_intel_mode_device *mode_dev;
+	struct i2c_adapter *hdmi_i2c_adapter;	/* for control functions */
+};
+
+struct psb_intel_crtc_state {
+	uint32_t saveDSPCNTR;
+	uint32_t savePIPECONF;
+	uint32_t savePIPESRC;
+	uint32_t saveDPLL;
+	uint32_t saveFP0;
+	uint32_t saveFP1;
+	uint32_t saveHTOTAL;
+	uint32_t saveHBLANK;
+	uint32_t saveHSYNC;
+	uint32_t saveVTOTAL;
+	uint32_t saveVBLANK;
+	uint32_t saveVSYNC;
+	uint32_t saveDSPSTRIDE;
+	uint32_t saveDSPSIZE;
+	uint32_t saveDSPPOS;
+	uint32_t saveDSPBASE;
+	uint32_t savePalette[256];
+};
+
+struct psb_intel_crtc {
+	struct drm_crtc base;
+	int pipe;
+	int plane;
+	uint32_t cursor_addr;
+	u8 lut_r[256], lut_g[256], lut_b[256];
+	u8 lut_adj[256];
+	struct psb_intel_framebuffer *fbdev_fb;
+	/* a mode_set for fbdev users on this crtc */
+	struct drm_mode_set mode_set;
+
+	/* GEM object that holds our cursor */
+	struct drm_gem_object *cursor_obj;
+
+	struct drm_display_mode saved_mode;
+	struct drm_display_mode saved_adjusted_mode;
+
+	struct psb_intel_mode_device *mode_dev;
+
+	/*crtc mode setting flags*/
+	u32 mode_flags;
+
+	/* Saved Crtc HW states */
+	struct psb_intel_crtc_state *crtc_state;
+};
+
+#define to_psb_intel_crtc(x)	\
+		container_of(x, struct psb_intel_crtc, base)
+#define to_psb_intel_output(x)	\
+		container_of(x, struct psb_intel_output, base)
+#define enc_to_psb_intel_output(x)	\
+		container_of(x, struct psb_intel_output, enc)
+#define to_psb_intel_framebuffer(x)	\
+		container_of(x, struct psb_intel_framebuffer, base)
+
+struct psb_intel_i2c_chan *psb_intel_i2c_create(struct drm_device *dev,
+					const u32 reg, const char *name);
+void psb_intel_i2c_destroy(struct psb_intel_i2c_chan *chan);
+int psb_intel_ddc_get_modes(struct psb_intel_output *psb_intel_output);
+extern bool psb_intel_ddc_probe(struct psb_intel_output *psb_intel_output);
+
+extern void psb_intel_crtc_init(struct drm_device *dev, int pipe,
+			    struct psb_intel_mode_device *mode_dev);
+extern void psb_intel_crt_init(struct drm_device *dev);
+extern void psb_intel_sdvo_init(struct drm_device *dev, int output_device);
+extern void psb_intel_dvo_init(struct drm_device *dev);
+extern void psb_intel_tv_init(struct drm_device *dev);
+extern void psb_intel_lvds_init(struct drm_device *dev,
+			    struct psb_intel_mode_device *mode_dev);
+extern void psb_intel_lvds_set_brightness(struct drm_device *dev, int level);
+extern void oaktrail_lvds_init(struct drm_device *dev,
+			   struct psb_intel_mode_device *mode_dev);
+extern void oaktrail_wait_for_INTR_PKT_SENT(struct drm_device *dev);
+extern void oaktrail_dsi_init(struct drm_device *dev,
+			   struct psb_intel_mode_device *mode_dev);
+extern void mid_dsi_init(struct drm_device *dev,
+		    struct psb_intel_mode_device *mode_dev, int dsi_num);
+
+extern void psb_intel_crtc_load_lut(struct drm_crtc *crtc);
+extern void psb_intel_encoder_prepare(struct drm_encoder *encoder);
+extern void psb_intel_encoder_commit(struct drm_encoder *encoder);
+
+extern struct drm_encoder *psb_intel_best_encoder(struct drm_connector
+					      *connector);
+
+extern struct drm_display_mode *psb_intel_crtc_mode_get(struct drm_device *dev,
+						    struct drm_crtc *crtc);
+extern void psb_intel_wait_for_vblank(struct drm_device *dev);
+extern int psb_intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+				struct drm_file *file_priv);
+extern struct drm_crtc *psb_intel_get_crtc_from_pipe(struct drm_device *dev,
+						 int pipe);
+extern struct drm_connector *psb_intel_sdvo_find(struct drm_device *dev,
+					     int sdvoB);
+extern int psb_intel_sdvo_supports_hotplug(struct drm_connector *connector);
+extern void psb_intel_sdvo_set_hotplug(struct drm_connector *connector,
+				   int enable);
+extern int intelfb_probe(struct drm_device *dev);
+extern int intelfb_remove(struct drm_device *dev,
+			  struct drm_framebuffer *fb);
+extern struct drm_framebuffer *psb_intel_framebuffer_create(struct drm_device
+							*dev, struct
+							drm_mode_fb_cmd
+							*mode_cmd,
+							void *mm_private);
+extern bool psb_intel_lvds_mode_fixup(struct drm_encoder *encoder,
+				      struct drm_display_mode *mode,
+				      struct drm_display_mode *adjusted_mode);
+extern int psb_intel_lvds_mode_valid(struct drm_connector *connector,
+				     struct drm_display_mode *mode);
+extern int psb_intel_lvds_set_property(struct drm_connector *connector,
+					struct drm_property *property,
+					uint64_t value);
+extern void psb_intel_lvds_destroy(struct drm_connector *connector);
+extern const struct drm_encoder_funcs psb_intel_lvds_enc_funcs;
+
+
+#endif				/* __INTEL_DRV_H__ */
diff --git a/drivers/gpu/drm/gma500/psb_intel_lvds.c b/drivers/gpu/drm/gma500/psb_intel_lvds.c
new file mode 100644
index 0000000..c6436da
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_intel_lvds.c
@@ -0,0 +1,849 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ *	Dave Airlie <airlied@linux.ie>
+ *	Jesse Barnes <jesse.barnes@intel.com>
+ */
+
+#include <linux/i2c.h>
+#include <drm/drmP.h>
+
+#include "intel_bios.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "power.h"
+#include <linux/pm_runtime.h>
+
+/*
+ * LVDS I2C backlight control macros
+ */
+#define BRIGHTNESS_MAX_LEVEL 100
+#define BRIGHTNESS_MASK 0xFF
+#define BLC_I2C_TYPE	0x01
+#define BLC_PWM_TYPT	0x02
+
+#define BLC_POLARITY_NORMAL 0
+#define BLC_POLARITY_INVERSE 1
+
+#define PSB_BLC_MAX_PWM_REG_FREQ       (0xFFFE)
+#define PSB_BLC_MIN_PWM_REG_FREQ	(0x2)
+#define PSB_BLC_PWM_PRECISION_FACTOR	(10)
+#define PSB_BACKLIGHT_PWM_CTL_SHIFT	(16)
+#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
+
+struct psb_intel_lvds_priv {
+	/*
+	 * Saved LVDO output states
+	 */
+	uint32_t savePP_ON;
+	uint32_t savePP_OFF;
+	uint32_t saveLVDS;
+	uint32_t savePP_CONTROL;
+	uint32_t savePP_CYCLE;
+	uint32_t savePFIT_CONTROL;
+	uint32_t savePFIT_PGM_RATIOS;
+	uint32_t saveBLC_PWM_CTL;
+};
+
+
+/*
+ * Returns the maximum level of the backlight duty cycle field.
+ */
+static u32 psb_intel_lvds_get_max_backlight(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 retVal;
+
+	if (gma_power_begin(dev, false)) {
+		retVal = ((REG_READ(BLC_PWM_CTL) &
+			  BACKLIGHT_MODULATION_FREQ_MASK) >>
+			  BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+		gma_power_end(dev);
+	} else
+		retVal = ((dev_priv->saveBLC_PWM_CTL &
+			  BACKLIGHT_MODULATION_FREQ_MASK) >>
+			  BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+	return retVal;
+}
+
+/*
+ * Set LVDS backlight level by I2C command
+ *
+ * FIXME: at some point we need to both track this for PM and also
+ * disable runtime pm on MRST if the brightness is nil (ie blanked)
+ */
+static int psb_lvds_i2c_set_brightness(struct drm_device *dev,
+					unsigned int level)
+{
+	struct drm_psb_private *dev_priv =
+		(struct drm_psb_private *)dev->dev_private;
+
+	struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus;
+	u8 out_buf[2];
+	unsigned int blc_i2c_brightness;
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = lvds_i2c_bus->slave_addr,
+			.flags = 0,
+			.len = 2,
+			.buf = out_buf,
+		}
+	};
+
+	blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level *
+			     BRIGHTNESS_MASK /
+			     BRIGHTNESS_MAX_LEVEL);
+
+	if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
+		blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness;
+
+	out_buf[0] = dev_priv->lvds_bl->brightnesscmd;
+	out_buf[1] = (u8)blc_i2c_brightness;
+
+	if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1) {
+		dev_dbg(dev->dev, "I2C set brightness.(command, value) (%d, %d)\n",
+			dev_priv->lvds_bl->brightnesscmd,
+			blc_i2c_brightness);
+		return 0;
+	}
+
+	dev_err(dev->dev, "I2C transfer error\n");
+	return -1;
+}
+
+
+static int psb_lvds_pwm_set_brightness(struct drm_device *dev, int level)
+{
+	struct drm_psb_private *dev_priv =
+			(struct drm_psb_private *)dev->dev_private;
+
+	u32 max_pwm_blc;
+	u32 blc_pwm_duty_cycle;
+
+	max_pwm_blc = psb_intel_lvds_get_max_backlight(dev);
+
+	/*BLC_PWM_CTL Should be initiated while backlight device init*/
+	BUG_ON((max_pwm_blc & PSB_BLC_MAX_PWM_REG_FREQ) == 0);
+
+	blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL;
+
+	if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
+		blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle;
+
+	blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
+	REG_WRITE(BLC_PWM_CTL,
+		  (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
+		  (blc_pwm_duty_cycle));
+
+	return 0;
+}
+
+/*
+ * Set LVDS backlight level either by I2C or PWM
+ */
+void psb_intel_lvds_set_brightness(struct drm_device *dev, int level)
+{
+	/*u32 blc_pwm_ctl;*/
+	struct drm_psb_private *dev_priv =
+			(struct drm_psb_private *)dev->dev_private;
+
+	dev_dbg(dev->dev, "backlight level is %d\n", level);
+
+	if (!dev_priv->lvds_bl) {
+		dev_err(dev->dev, "NO LVDS Backlight Info\n");
+		return;
+	}
+
+	if (dev_priv->lvds_bl->type == BLC_I2C_TYPE)
+		psb_lvds_i2c_set_brightness(dev, level);
+	else
+		psb_lvds_pwm_set_brightness(dev, level);
+}
+
+/*
+ * Sets the backlight level.
+ *
+ * level: backlight level, from 0 to psb_intel_lvds_get_max_backlight().
+ */
+static void psb_intel_lvds_set_backlight(struct drm_device *dev, int level)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 blc_pwm_ctl;
+
+	if (gma_power_begin(dev, false)) {
+		blc_pwm_ctl =
+			REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
+		REG_WRITE(BLC_PWM_CTL,
+				(blc_pwm_ctl |
+				(level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
+		gma_power_end(dev);
+	} else {
+		blc_pwm_ctl = dev_priv->saveBLC_PWM_CTL &
+				~BACKLIGHT_DUTY_CYCLE_MASK;
+		dev_priv->saveBLC_PWM_CTL = (blc_pwm_ctl |
+					(level << BACKLIGHT_DUTY_CYCLE_SHIFT));
+	}
+}
+
+/*
+ * Sets the power state for the panel.
+ */
+static void psb_intel_lvds_set_power(struct drm_device *dev,
+				 struct psb_intel_output *output, bool on)
+{
+	u32 pp_status;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	if (on) {
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
+			  POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while ((pp_status & PP_ON) == 0);
+
+		psb_intel_lvds_set_backlight(dev,
+					 output->
+					 mode_dev->backlight_duty_cycle);
+	} else {
+		psb_intel_lvds_set_backlight(dev, 0);
+
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
+			  ~POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while (pp_status & PP_ON);
+	}
+
+	gma_power_end(dev);
+}
+
+static void psb_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+
+	if (mode == DRM_MODE_DPMS_ON)
+		psb_intel_lvds_set_power(dev, output, true);
+	else
+		psb_intel_lvds_set_power(dev, output, false);
+
+	/* XXX: We never power down the LVDS pairs. */
+}
+
+static void psb_intel_lvds_save(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_psb_private *dev_priv =
+		(struct drm_psb_private *)dev->dev_private;
+	struct psb_intel_output *psb_intel_output =
+		to_psb_intel_output(connector);
+	struct psb_intel_lvds_priv *lvds_priv =
+		(struct psb_intel_lvds_priv *)psb_intel_output->dev_priv;
+
+	lvds_priv->savePP_ON = REG_READ(LVDSPP_ON);
+	lvds_priv->savePP_OFF = REG_READ(LVDSPP_OFF);
+	lvds_priv->saveLVDS = REG_READ(LVDS);
+	lvds_priv->savePP_CONTROL = REG_READ(PP_CONTROL);
+	lvds_priv->savePP_CYCLE = REG_READ(PP_CYCLE);
+	/*lvds_priv->savePP_DIVISOR = REG_READ(PP_DIVISOR);*/
+	lvds_priv->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
+	lvds_priv->savePFIT_CONTROL = REG_READ(PFIT_CONTROL);
+	lvds_priv->savePFIT_PGM_RATIOS = REG_READ(PFIT_PGM_RATIOS);
+
+	/*TODO: move backlight_duty_cycle to psb_intel_lvds_priv*/
+	dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
+						BACKLIGHT_DUTY_CYCLE_MASK);
+
+	/*
+	 * If the light is off at server startup,
+	 * just make it full brightness
+	 */
+	if (dev_priv->backlight_duty_cycle == 0)
+		dev_priv->backlight_duty_cycle =
+		psb_intel_lvds_get_max_backlight(dev);
+
+	dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n",
+			lvds_priv->savePP_ON,
+			lvds_priv->savePP_OFF,
+			lvds_priv->saveLVDS,
+			lvds_priv->savePP_CONTROL,
+			lvds_priv->savePP_CYCLE,
+			lvds_priv->saveBLC_PWM_CTL);
+}
+
+static void psb_intel_lvds_restore(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	u32 pp_status;
+
+	/*struct drm_psb_private *dev_priv =
+				(struct drm_psb_private *)dev->dev_private;*/
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+	struct psb_intel_lvds_priv *lvds_priv =
+		(struct psb_intel_lvds_priv *)psb_intel_output->dev_priv;
+
+	dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n",
+			lvds_priv->savePP_ON,
+			lvds_priv->savePP_OFF,
+			lvds_priv->saveLVDS,
+			lvds_priv->savePP_CONTROL,
+			lvds_priv->savePP_CYCLE,
+			lvds_priv->saveBLC_PWM_CTL);
+
+	REG_WRITE(BLC_PWM_CTL, lvds_priv->saveBLC_PWM_CTL);
+	REG_WRITE(PFIT_CONTROL, lvds_priv->savePFIT_CONTROL);
+	REG_WRITE(PFIT_PGM_RATIOS, lvds_priv->savePFIT_PGM_RATIOS);
+	REG_WRITE(LVDSPP_ON, lvds_priv->savePP_ON);
+	REG_WRITE(LVDSPP_OFF, lvds_priv->savePP_OFF);
+	/*REG_WRITE(PP_DIVISOR, lvds_priv->savePP_DIVISOR);*/
+	REG_WRITE(PP_CYCLE, lvds_priv->savePP_CYCLE);
+	REG_WRITE(PP_CONTROL, lvds_priv->savePP_CONTROL);
+	REG_WRITE(LVDS, lvds_priv->saveLVDS);
+
+	if (lvds_priv->savePP_CONTROL & POWER_TARGET_ON) {
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
+			POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while ((pp_status & PP_ON) == 0);
+	} else {
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
+			~POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while (pp_status & PP_ON);
+	}
+}
+
+int psb_intel_lvds_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+	struct psb_intel_output *psb_intel_output =
+				to_psb_intel_output(connector);
+	struct drm_display_mode *fixed_mode =
+	    psb_intel_output->mode_dev->panel_fixed_mode;
+
+	if (psb_intel_output->type == INTEL_OUTPUT_MIPI2)
+		fixed_mode = psb_intel_output->mode_dev->panel_fixed_mode2;
+
+	/* just in case */
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	/* just in case */
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return MODE_NO_INTERLACE;
+
+	if (fixed_mode) {
+		if (mode->hdisplay > fixed_mode->hdisplay)
+			return MODE_PANEL;
+		if (mode->vdisplay > fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+	return MODE_OK;
+}
+
+bool psb_intel_lvds_mode_fixup(struct drm_encoder *encoder,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	struct psb_intel_mode_device *mode_dev =
+	    enc_to_psb_intel_output(encoder)->mode_dev;
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_crtc *psb_intel_crtc =
+				to_psb_intel_crtc(encoder->crtc);
+	struct drm_encoder *tmp_encoder;
+	struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode;
+	struct psb_intel_output *psb_intel_output =
+					enc_to_psb_intel_output(encoder);
+
+	if (psb_intel_output->type == INTEL_OUTPUT_MIPI2)
+		panel_fixed_mode = mode_dev->panel_fixed_mode2;
+
+	/* FIXME: review for Medfield */
+	/* PSB requires the LVDS is on pipe B, MRST has only one pipe anyway */
+	if (!IS_MRST(dev) && psb_intel_crtc->pipe == 0) {
+		printk(KERN_ERR "Can't support LVDS on pipe A\n");
+		return false;
+	}
+	if (IS_MRST(dev) && psb_intel_crtc->pipe != 0) {
+		printk(KERN_ERR "Must use PIPE A\n");
+		return false;
+	}
+	/* Should never happen!! */
+	list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list,
+			    head) {
+		if (tmp_encoder != encoder
+		    && tmp_encoder->crtc == encoder->crtc) {
+			printk(KERN_ERR "Can't enable LVDS and another "
+			       "encoder on the same pipe\n");
+			return false;
+		}
+	}
+
+	/*
+	 * If we have timings from the BIOS for the panel, put them in
+	 * to the adjusted mode.  The CRTC will be set up for this mode,
+	 * with the panel scaling set up to source from the H/VDisplay
+	 * of the original mode.
+	 */
+	if (panel_fixed_mode != NULL) {
+		adjusted_mode->hdisplay = panel_fixed_mode->hdisplay;
+		adjusted_mode->hsync_start = panel_fixed_mode->hsync_start;
+		adjusted_mode->hsync_end = panel_fixed_mode->hsync_end;
+		adjusted_mode->htotal = panel_fixed_mode->htotal;
+		adjusted_mode->vdisplay = panel_fixed_mode->vdisplay;
+		adjusted_mode->vsync_start = panel_fixed_mode->vsync_start;
+		adjusted_mode->vsync_end = panel_fixed_mode->vsync_end;
+		adjusted_mode->vtotal = panel_fixed_mode->vtotal;
+		adjusted_mode->clock = panel_fixed_mode->clock;
+		drm_mode_set_crtcinfo(adjusted_mode,
+				      CRTC_INTERLACE_HALVE_V);
+	}
+
+	/*
+	 * XXX: It would be nice to support lower refresh rates on the
+	 * panels to reduce power consumption, and perhaps match the
+	 * user's requested refresh rate.
+	 */
+
+	return true;
+}
+
+static void psb_intel_lvds_prepare(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct psb_intel_mode_device *mode_dev = output->mode_dev;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
+	mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
+					  BACKLIGHT_DUTY_CYCLE_MASK);
+
+	psb_intel_lvds_set_power(dev, output, false);
+
+	gma_power_end(dev);
+}
+
+static void psb_intel_lvds_commit(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct psb_intel_mode_device *mode_dev = output->mode_dev;
+
+	if (mode_dev->backlight_duty_cycle == 0)
+		mode_dev->backlight_duty_cycle =
+		    psb_intel_lvds_get_max_backlight(dev);
+
+	psb_intel_lvds_set_power(dev, output, true);
+}
+
+static void psb_intel_lvds_mode_set(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 pfit_control;
+
+	/*
+	 * The LVDS pin pair will already have been turned on in the
+	 * psb_intel_crtc_mode_set since it has a large impact on the DPLL
+	 * settings.
+	 */
+
+	/*
+	 * Enable automatic panel scaling so that non-native modes fill the
+	 * screen.  Should be enabled before the pipe is enabled, according to
+	 * register description and PRM.
+	 */
+	if (mode->hdisplay != adjusted_mode->hdisplay ||
+	    mode->vdisplay != adjusted_mode->vdisplay)
+		pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
+				HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
+				HORIZ_INTERP_BILINEAR);
+	else
+		pfit_control = 0;
+
+	if (dev_priv->lvds_dither)
+		pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+
+	REG_WRITE(PFIT_CONTROL, pfit_control);
+}
+
+/*
+ * Detect the LVDS connection.
+ *
+ * This always returns CONNECTOR_STATUS_CONNECTED.
+ * This connector should only have
+ * been set up if the LVDS was actually connected anyway.
+ */
+static enum drm_connector_status psb_intel_lvds_detect(struct drm_connector
+						   *connector, bool force)
+{
+	return connector_status_connected;
+}
+
+/*
+ * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
+ */
+static int psb_intel_lvds_get_modes(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+	struct psb_intel_mode_device *mode_dev =
+					psb_intel_output->mode_dev;
+	int ret = 0;
+
+	if (!IS_MRST(dev))
+		ret = psb_intel_ddc_get_modes(psb_intel_output);
+
+	if (ret)
+		return ret;
+
+	/* Didn't get an EDID, so
+	 * Set wide sync ranges so we get all modes
+	 * handed to valid_mode for checking
+	 */
+	connector->display_info.min_vfreq = 0;
+	connector->display_info.max_vfreq = 200;
+	connector->display_info.min_hfreq = 0;
+	connector->display_info.max_hfreq = 200;
+
+	if (mode_dev->panel_fixed_mode != NULL) {
+		struct drm_display_mode *mode =
+		    drm_mode_duplicate(dev, mode_dev->panel_fixed_mode);
+		drm_mode_probed_add(connector, mode);
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * psb_intel_lvds_destroy - unregister and free LVDS structures
+ * @connector: connector to free
+ *
+ * Unregister the DDC bus for this connector then free the driver private
+ * structure.
+ */
+void psb_intel_lvds_destroy(struct drm_connector *connector)
+{
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+
+	if (psb_intel_output->ddc_bus)
+		psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+int psb_intel_lvds_set_property(struct drm_connector *connector,
+				       struct drm_property *property,
+				       uint64_t value)
+{
+	struct drm_encoder *encoder = connector->encoder;
+
+	if (!encoder)
+		return -1;
+
+	if (!strcmp(property->name, "scaling mode")) {
+		struct psb_intel_crtc *crtc =
+					to_psb_intel_crtc(encoder->crtc);
+		uint64_t curval;
+
+		if (!crtc)
+			goto set_prop_error;
+
+		switch (value) {
+		case DRM_MODE_SCALE_FULLSCREEN:
+			break;
+		case DRM_MODE_SCALE_NO_SCALE:
+			break;
+		case DRM_MODE_SCALE_ASPECT:
+			break;
+		default:
+			goto set_prop_error;
+		}
+
+		if (drm_connector_property_get_value(connector,
+						     property,
+						     &curval))
+			goto set_prop_error;
+
+		if (curval == value)
+			goto set_prop_done;
+
+		if (drm_connector_property_set_value(connector,
+							property,
+							value))
+			goto set_prop_error;
+
+		if (crtc->saved_mode.hdisplay != 0 &&
+		    crtc->saved_mode.vdisplay != 0) {
+			if (!drm_crtc_helper_set_mode(encoder->crtc,
+						      &crtc->saved_mode,
+						      encoder->crtc->x,
+						      encoder->crtc->y,
+						      encoder->crtc->fb))
+				goto set_prop_error;
+		}
+	} else if (!strcmp(property->name, "backlight")) {
+		if (drm_connector_property_set_value(connector,
+							property,
+							value))
+			goto set_prop_error;
+		else {
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+			struct drm_psb_private *devp = encoder->dev->dev_private;
+			struct backlight_device *bd = devp->backlight_device;
+			if (bd) {
+				bd->props.brightness = value;
+				backlight_update_status(bd);
+			}
+#endif
+		}
+	} else if (!strcmp(property->name, "DPMS")) {
+		struct drm_encoder_helper_funcs *hfuncs
+						= encoder->helper_private;
+		hfuncs->dpms(encoder, value);
+	}
+
+set_prop_done:
+	return 0;
+set_prop_error:
+	return -1;
+}
+
+static const struct drm_encoder_helper_funcs psb_intel_lvds_helper_funcs = {
+	.dpms = psb_intel_lvds_encoder_dpms,
+	.mode_fixup = psb_intel_lvds_mode_fixup,
+	.prepare = psb_intel_lvds_prepare,
+	.mode_set = psb_intel_lvds_mode_set,
+	.commit = psb_intel_lvds_commit,
+};
+
+const struct drm_connector_helper_funcs
+				psb_intel_lvds_connector_helper_funcs = {
+	.get_modes = psb_intel_lvds_get_modes,
+	.mode_valid = psb_intel_lvds_mode_valid,
+	.best_encoder = psb_intel_best_encoder,
+};
+
+const struct drm_connector_funcs psb_intel_lvds_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.save = psb_intel_lvds_save,
+	.restore = psb_intel_lvds_restore,
+	.detect = psb_intel_lvds_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = psb_intel_lvds_set_property,
+	.destroy = psb_intel_lvds_destroy,
+};
+
+
+static void psb_intel_lvds_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+const struct drm_encoder_funcs psb_intel_lvds_enc_funcs = {
+	.destroy = psb_intel_lvds_enc_destroy,
+};
+
+
+
+/**
+ * psb_intel_lvds_init - setup LVDS connectors on this device
+ * @dev: drm device
+ *
+ * Create the connector, register the LVDS DDC bus, and try to figure out what
+ * modes we can display on the LVDS panel (if present).
+ */
+void psb_intel_lvds_init(struct drm_device *dev,
+		     struct psb_intel_mode_device *mode_dev)
+{
+	struct psb_intel_output *psb_intel_output;
+	struct psb_intel_lvds_priv *lvds_priv;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct drm_display_mode *scan;	/* *modes, *bios_mode; */
+	struct drm_crtc *crtc;
+	struct drm_psb_private *dev_priv =
+				(struct drm_psb_private *)dev->dev_private;
+	u32 lvds;
+	int pipe;
+
+	psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL);
+	if (!psb_intel_output)
+		return;
+
+	lvds_priv = kzalloc(sizeof(struct psb_intel_lvds_priv), GFP_KERNEL);
+	if (!lvds_priv) {
+		kfree(psb_intel_output);
+		dev_err(dev->dev, "LVDS private allocation error\n");
+		return;
+	}
+
+	psb_intel_output->dev_priv = lvds_priv;
+
+	psb_intel_output->mode_dev = mode_dev;
+	connector = &psb_intel_output->base;
+	encoder = &psb_intel_output->enc;
+	drm_connector_init(dev, &psb_intel_output->base,
+			   &psb_intel_lvds_connector_funcs,
+			   DRM_MODE_CONNECTOR_LVDS);
+
+	drm_encoder_init(dev, &psb_intel_output->enc,
+			 &psb_intel_lvds_enc_funcs,
+			 DRM_MODE_ENCODER_LVDS);
+
+	drm_mode_connector_attach_encoder(&psb_intel_output->base,
+					  &psb_intel_output->enc);
+	psb_intel_output->type = INTEL_OUTPUT_LVDS;
+
+	drm_encoder_helper_add(encoder, &psb_intel_lvds_helper_funcs);
+	drm_connector_helper_add(connector,
+				 &psb_intel_lvds_connector_helper_funcs);
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+	/*Attach connector properties*/
+	drm_connector_attach_property(connector,
+				      dev->mode_config.scaling_mode_property,
+				      DRM_MODE_SCALE_FULLSCREEN);
+	drm_connector_attach_property(connector,
+				      dev_priv->backlight_property,
+				      BRIGHTNESS_MAX_LEVEL);
+
+	/*
+	 * Set up I2C bus
+	 * FIXME: distroy i2c_bus when exit
+	 */
+	psb_intel_output->i2c_bus = psb_intel_i2c_create(dev,
+							 GPIOB,
+							 "LVDSBLC_B");
+	if (!psb_intel_output->i2c_bus) {
+		dev_printk(KERN_ERR,
+			&dev->pdev->dev, "I2C bus registration failed.\n");
+		goto failed_blc_i2c;
+	}
+	psb_intel_output->i2c_bus->slave_addr = 0x2C;
+	dev_priv->lvds_i2c_bus =  psb_intel_output->i2c_bus;
+
+	/*
+	 * LVDS discovery:
+	 * 1) check for EDID on DDC
+	 * 2) check for VBT data
+	 * 3) check to see if LVDS is already on
+	 *    if none of the above, no panel
+	 * 4) make sure lid is open
+	 *    if closed, act like it's not there for now
+	 */
+
+	/* Set up the DDC bus. */
+	psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
+							 GPIOC,
+							 "LVDSDDC_C");
+	if (!psb_intel_output->ddc_bus) {
+		dev_printk(KERN_ERR, &dev->pdev->dev,
+			   "DDC bus registration " "failed.\n");
+		goto failed_ddc;
+	}
+
+	/*
+	 * Attempt to get the fixed panel mode from DDC.  Assume that the
+	 * preferred mode is the right one.
+	 */
+	psb_intel_ddc_get_modes(psb_intel_output);
+	list_for_each_entry(scan, &connector->probed_modes, head) {
+		if (scan->type & DRM_MODE_TYPE_PREFERRED) {
+			mode_dev->panel_fixed_mode =
+			    drm_mode_duplicate(dev, scan);
+			goto out;	/* FIXME: check for quirks */
+		}
+	}
+
+	/* Failed to get EDID, what about VBT? do we need this? */
+	if (mode_dev->vbt_mode)
+		mode_dev->panel_fixed_mode =
+		    drm_mode_duplicate(dev, mode_dev->vbt_mode);
+
+	if (!mode_dev->panel_fixed_mode)
+		if (dev_priv->lfp_lvds_vbt_mode)
+			mode_dev->panel_fixed_mode =
+				drm_mode_duplicate(dev,
+					dev_priv->lfp_lvds_vbt_mode);
+
+	/*
+	 * If we didn't get EDID, try checking if the panel is already turned
+	 * on.	If so, assume that whatever is currently programmed is the
+	 * correct mode.
+	 */
+	lvds = REG_READ(LVDS);
+	pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
+	crtc = psb_intel_get_crtc_from_pipe(dev, pipe);
+
+	if (crtc && (lvds & LVDS_PORT_EN)) {
+		mode_dev->panel_fixed_mode =
+		    psb_intel_crtc_mode_get(dev, crtc);
+		if (mode_dev->panel_fixed_mode) {
+			mode_dev->panel_fixed_mode->type |=
+			    DRM_MODE_TYPE_PREFERRED;
+			goto out;	/* FIXME: check for quirks */
+		}
+	}
+
+	/* If we still don't have a mode after all that, give up. */
+	if (!mode_dev->panel_fixed_mode) {
+		dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n");
+		goto failed_find;
+	}
+
+	/*
+	 * Blacklist machines with BIOSes that list an LVDS panel without
+	 * actually having one.
+	 */
+out:
+	drm_sysfs_connector_add(connector);
+	return;
+
+failed_find:
+	if (psb_intel_output->ddc_bus)
+		psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
+failed_ddc:
+	if (psb_intel_output->i2c_bus)
+		psb_intel_i2c_destroy(psb_intel_output->i2c_bus);
+failed_blc_i2c:
+	drm_encoder_cleanup(encoder);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
diff --git a/drivers/gpu/drm/gma500/psb_intel_modes.c b/drivers/gpu/drm/gma500/psb_intel_modes.c
new file mode 100644
index 0000000..bde1aff
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_intel_modes.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2007 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authers: Jesse Barnes <jesse.barnes@intel.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <drm/drmP.h>
+#include "psb_intel_drv.h"
+
+/**
+ * psb_intel_ddc_probe
+ *
+ */
+bool psb_intel_ddc_probe(struct psb_intel_output *psb_intel_output)
+{
+	u8 out_buf[] = { 0x0, 0x0 };
+	u8 buf[2];
+	int ret;
+	struct i2c_msg msgs[] = {
+		{
+		 .addr = 0x50,
+		 .flags = 0,
+		 .len = 1,
+		 .buf = out_buf,
+		 },
+		{
+		 .addr = 0x50,
+		 .flags = I2C_M_RD,
+		 .len = 1,
+		 .buf = buf,
+		 }
+	};
+
+	ret = i2c_transfer(&psb_intel_output->ddc_bus->adapter, msgs, 2);
+	if (ret == 2)
+		return true;
+
+	return false;
+}
+
+/**
+ * psb_intel_ddc_get_modes - get modelist from monitor
+ * @connector: DRM connector device to use
+ *
+ * Fetch the EDID information from @connector using the DDC bus.
+ */
+int psb_intel_ddc_get_modes(struct psb_intel_output *psb_intel_output)
+{
+	struct edid *edid;
+	int ret = 0;
+
+	edid =
+	    drm_get_edid(&psb_intel_output->base,
+			 &psb_intel_output->ddc_bus->adapter);
+	if (edid) {
+		drm_mode_connector_update_edid_property(&psb_intel_output->
+							base, edid);
+		ret = drm_add_edid_modes(&psb_intel_output->base, edid);
+		kfree(edid);
+	}
+	return ret;
+}
diff --git a/drivers/gpu/drm/gma500/psb_intel_reg.h b/drivers/gpu/drm/gma500/psb_intel_reg.h
new file mode 100644
index 0000000..1ac16aa
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_intel_reg.h
@@ -0,0 +1,1235 @@
+/*
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __PSB_INTEL_REG_H__
+#define __PSB_INTEL_REG_H__
+
+#define BLC_PWM_CTL		0x61254
+#define BLC_PWM_CTL2		0x61250
+#define BLC_PWM_CTL_C		0x62254
+#define BLC_PWM_CTL2_C		0x62250
+#define BACKLIGHT_MODULATION_FREQ_SHIFT		(17)
+/*
+ * This is the most significant 15 bits of the number of backlight cycles in a
+ * complete cycle of the modulated backlight control.
+ *
+ * The actual value is this field multiplied by two.
+ */
+#define BACKLIGHT_MODULATION_FREQ_MASK	(0x7fff << 17)
+#define BLM_LEGACY_MODE			(1 << 16)
+/*
+ * This is the number of cycles out of the backlight modulation cycle for which
+ * the backlight is on.
+ *
+ * This field must be no greater than the number of cycles in the complete
+ * backlight modulation cycle.
+ */
+#define BACKLIGHT_DUTY_CYCLE_SHIFT	(0)
+#define BACKLIGHT_DUTY_CYCLE_MASK	(0xffff)
+
+#define I915_GCFGC			0xf0
+#define I915_LOW_FREQUENCY_ENABLE	(1 << 7)
+#define I915_DISPLAY_CLOCK_190_200_MHZ	(0 << 4)
+#define I915_DISPLAY_CLOCK_333_MHZ	(4 << 4)
+#define I915_DISPLAY_CLOCK_MASK		(7 << 4)
+
+#define I855_HPLLCC			0xc0
+#define I855_CLOCK_CONTROL_MASK		(3 << 0)
+#define I855_CLOCK_133_200		(0 << 0)
+#define I855_CLOCK_100_200		(1 << 0)
+#define I855_CLOCK_100_133		(2 << 0)
+#define I855_CLOCK_166_250		(3 << 0)
+
+/* I830 CRTC registers */
+#define HTOTAL_A		0x60000
+#define HBLANK_A		0x60004
+#define HSYNC_A			0x60008
+#define VTOTAL_A		0x6000c
+#define VBLANK_A		0x60010
+#define VSYNC_A			0x60014
+#define PIPEASRC		0x6001c
+#define BCLRPAT_A		0x60020
+#define VSYNCSHIFT_A		0x60028
+
+#define HTOTAL_B		0x61000
+#define HBLANK_B		0x61004
+#define HSYNC_B			0x61008
+#define VTOTAL_B		0x6100c
+#define VBLANK_B		0x61010
+#define VSYNC_B			0x61014
+#define PIPEBSRC		0x6101c
+#define BCLRPAT_B		0x61020
+#define VSYNCSHIFT_B		0x61028
+
+#define HTOTAL_C		0x62000
+#define HBLANK_C		0x62004
+#define HSYNC_C			0x62008
+#define VTOTAL_C		0x6200c
+#define VBLANK_C		0x62010
+#define VSYNC_C			0x62014
+#define PIPECSRC		0x6201c
+#define BCLRPAT_C		0x62020
+#define VSYNCSHIFT_C		0x62028
+
+#define PP_STATUS		0x61200
+# define PP_ON				(1 << 31)
+/*
+ * Indicates that all dependencies of the panel are on:
+ *
+ * - PLL enabled
+ * - pipe enabled
+ * - LVDS/DVOB/DVOC on
+ */
+#define PP_READY			(1 << 30)
+#define PP_SEQUENCE_NONE		(0 << 28)
+#define PP_SEQUENCE_ON			(1 << 28)
+#define PP_SEQUENCE_OFF			(2 << 28)
+#define PP_SEQUENCE_MASK		0x30000000
+#define PP_CONTROL		0x61204
+#define POWER_TARGET_ON			(1 << 0)
+
+#define LVDSPP_ON		0x61208
+#define LVDSPP_OFF		0x6120c
+#define PP_CYCLE		0x61210
+
+#define PFIT_CONTROL		0x61230
+#define PFIT_ENABLE			(1 << 31)
+#define PFIT_PIPE_MASK			(3 << 29)
+#define PFIT_PIPE_SHIFT			29
+#define PFIT_SCALING_MODE_PILLARBOX	(1 << 27)
+#define PFIT_SCALING_MODE_LETTERBOX	(3 << 26)
+#define VERT_INTERP_DISABLE		(0 << 10)
+#define VERT_INTERP_BILINEAR		(1 << 10)
+#define VERT_INTERP_MASK		(3 << 10)
+#define VERT_AUTO_SCALE			(1 << 9)
+#define HORIZ_INTERP_DISABLE		(0 << 6)
+#define HORIZ_INTERP_BILINEAR		(1 << 6)
+#define HORIZ_INTERP_MASK		(3 << 6)
+#define HORIZ_AUTO_SCALE		(1 << 5)
+#define PANEL_8TO6_DITHER_ENABLE	(1 << 3)
+
+#define PFIT_PGM_RATIOS		0x61234
+#define PFIT_VERT_SCALE_MASK			0xfff00000
+#define PFIT_HORIZ_SCALE_MASK			0x0000fff0
+
+#define PFIT_AUTO_RATIOS	0x61238
+
+#define DPLL_A			0x06014
+#define DPLL_B			0x06018
+#define DPLL_VCO_ENABLE			(1 << 31)
+#define DPLL_DVO_HIGH_SPEED		(1 << 30)
+#define DPLL_SYNCLOCK_ENABLE		(1 << 29)
+#define DPLL_VGA_MODE_DIS		(1 << 28)
+#define DPLLB_MODE_DAC_SERIAL		(1 << 26)	/* i915 */
+#define DPLLB_MODE_LVDS			(2 << 26)	/* i915 */
+#define DPLL_MODE_MASK			(3 << 26)
+#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10	(0 << 24)	/* i915 */
+#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5	(1 << 24)	/* i915 */
+#define DPLLB_LVDS_P2_CLOCK_DIV_14	(0 << 24)	/* i915 */
+#define DPLLB_LVDS_P2_CLOCK_DIV_7	(1 << 24)	/* i915 */
+#define DPLL_P2_CLOCK_DIV_MASK		0x03000000	/* i915 */
+#define DPLL_FPA01_P1_POST_DIV_MASK	0x00ff0000	/* i915 */
+#define DPLL_LOCK			(1 << 15)	/* CDV */
+
+/*
+ *  The i830 generation, in DAC/serial mode, defines p1 as two plus this
+ * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set.
+ */
+# define DPLL_FPA01_P1_POST_DIV_MASK_I830	0x001f0000
+/*
+ * The i830 generation, in LVDS mode, defines P1 as the bit number set within
+ * this field (only one bit may be set).
+ */
+#define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS	0x003f0000
+#define DPLL_FPA01_P1_POST_DIV_SHIFT	16
+#define PLL_P2_DIVIDE_BY_4		(1 << 23)	/* i830, required
+							 * in DVO non-gang */
+# define PLL_P1_DIVIDE_BY_TWO		(1 << 21)	/* i830 */
+#define PLL_REF_INPUT_DREFCLK		(0 << 13)
+#define PLL_REF_INPUT_TVCLKINA		(1 << 13)	/* i830 */
+#define PLL_REF_INPUT_TVCLKINBC		(2 << 13)	/* SDVO
+								 * TVCLKIN */
+#define PLLB_REF_INPUT_SPREADSPECTRUMIN	(3 << 13)
+#define PLL_REF_INPUT_MASK		(3 << 13)
+#define PLL_LOAD_PULSE_PHASE_SHIFT	9
+/*
+ * Parallel to Serial Load Pulse phase selection.
+ * Selects the phase for the 10X DPLL clock for the PCIe
+ * digital display port. The range is 4 to 13; 10 or more
+ * is just a flip delay. The default is 6
+ */
+#define PLL_LOAD_PULSE_PHASE_MASK	(0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
+#define DISPLAY_RATE_SELECT_FPA1	(1 << 8)
+
+/*
+ * SDVO multiplier for 945G/GM. Not used on 965.
+ *
+ * DPLL_MD_UDI_MULTIPLIER_MASK
+ */
+#define SDVO_MULTIPLIER_MASK		0x000000ff
+#define SDVO_MULTIPLIER_SHIFT_HIRES	4
+#define SDVO_MULTIPLIER_SHIFT_VGA	0
+
+/*
+ * PLL_MD
+ */
+/* Pipe A SDVO/UDI clock multiplier/divider register for G965. */
+#define DPLL_A_MD		0x0601c
+/* Pipe B SDVO/UDI clock multiplier/divider register for G965. */
+#define DPLL_B_MD		0x06020
+/*
+ * UDI pixel divider, controlling how many pixels are stuffed into a packet.
+ *
+ * Value is pixels minus 1.  Must be set to 1 pixel for SDVO.
+ */
+#define DPLL_MD_UDI_DIVIDER_MASK	0x3f000000
+#define DPLL_MD_UDI_DIVIDER_SHIFT	24
+/* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
+#define DPLL_MD_VGA_UDI_DIVIDER_MASK	0x003f0000
+#define DPLL_MD_VGA_UDI_DIVIDER_SHIFT	16
+/*
+ * SDVO/UDI pixel multiplier.
+ *
+ * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
+ * clock rate is 10 times the DPLL clock.  At low resolution/refresh rate
+ * modes, the bus rate would be below the limits, so SDVO allows for stuffing
+ * dummy bytes in the datastream at an increased clock rate, with both sides of
+ * the link knowing how many bytes are fill.
+ *
+ * So, for a mode with a dotclock of 65Mhz, we would want to double the clock
+ * rate to 130Mhz to get a bus rate of 1.30Ghz.  The DPLL clock rate would be
+ * set to 130Mhz, and the SDVO multiplier set to 2x in this register and
+ * through an SDVO command.
+ *
+ * This register field has values of multiplication factor minus 1, with
+ * a maximum multiplier of 5 for SDVO.
+ */
+#define DPLL_MD_UDI_MULTIPLIER_MASK	0x00003f00
+#define DPLL_MD_UDI_MULTIPLIER_SHIFT	8
+/*
+ * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
+ * This best be set to the default value (3) or the CRT won't work. No,
+ * I don't entirely understand what this does...
+ */
+#define DPLL_MD_VGA_UDI_MULTIPLIER_MASK	0x0000003f
+#define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0
+
+#define DPLL_TEST		0x606c
+#define DPLLB_TEST_SDVO_DIV_1		(0 << 22)
+#define DPLLB_TEST_SDVO_DIV_2		(1 << 22)
+#define DPLLB_TEST_SDVO_DIV_4		(2 << 22)
+#define DPLLB_TEST_SDVO_DIV_MASK	(3 << 22)
+#define DPLLB_TEST_N_BYPASS		(1 << 19)
+#define DPLLB_TEST_M_BYPASS		(1 << 18)
+#define DPLLB_INPUT_BUFFER_ENABLE	(1 << 16)
+#define DPLLA_TEST_N_BYPASS		(1 << 3)
+#define DPLLA_TEST_M_BYPASS		(1 << 2)
+#define DPLLA_INPUT_BUFFER_ENABLE	(1 << 0)
+
+#define ADPA			0x61100
+#define ADPA_DAC_ENABLE			(1 << 31)
+#define ADPA_DAC_DISABLE		0
+#define ADPA_PIPE_SELECT_MASK		(1 << 30)
+#define ADPA_PIPE_A_SELECT		0
+#define ADPA_PIPE_B_SELECT		(1 << 30)
+#define ADPA_USE_VGA_HVPOLARITY		(1 << 15)
+#define ADPA_SETS_HVPOLARITY		0
+#define ADPA_VSYNC_CNTL_DISABLE		(1 << 11)
+#define ADPA_VSYNC_CNTL_ENABLE		0
+#define ADPA_HSYNC_CNTL_DISABLE		(1 << 10)
+#define ADPA_HSYNC_CNTL_ENABLE		0
+#define ADPA_VSYNC_ACTIVE_HIGH		(1 << 4)
+#define ADPA_VSYNC_ACTIVE_LOW		0
+#define ADPA_HSYNC_ACTIVE_HIGH		(1 << 3)
+#define ADPA_HSYNC_ACTIVE_LOW		0
+
+#define FPA0			0x06040
+#define FPA1			0x06044
+#define FPB0			0x06048
+#define FPB1			0x0604c
+#define FP_N_DIV_MASK			0x003f0000
+#define FP_N_DIV_SHIFT			16
+#define FP_M1_DIV_MASK			0x00003f00
+#define FP_M1_DIV_SHIFT			8
+#define FP_M2_DIV_MASK			0x0000003f
+#define FP_M2_DIV_SHIFT			0
+
+#define PORT_HOTPLUG_EN		0x61110
+#define SDVOB_HOTPLUG_INT_EN		(1 << 26)
+#define SDVOC_HOTPLUG_INT_EN		(1 << 25)
+#define TV_HOTPLUG_INT_EN		(1 << 18)
+#define CRT_HOTPLUG_INT_EN		(1 << 9)
+#define CRT_HOTPLUG_FORCE_DETECT	(1 << 3)
+/* CDV.. */
+#define CRT_HOTPLUG_ACTIVATION_PERIOD_64	(1 << 8)
+#define CRT_HOTPLUG_DAC_ON_TIME_2M		(0 << 7)
+#define CRT_HOTPLUG_DAC_ON_TIME_4M		(1 << 7)
+#define CRT_HOTPLUG_VOLTAGE_COMPARE_40		(0 << 5)
+#define CRT_HOTPLUG_VOLTAGE_COMPARE_50		(1 << 5)
+#define CRT_HOTPLUG_VOLTAGE_COMPARE_60		(2 << 5)
+#define CRT_HOTPLUG_VOLTAGE_COMPARE_70		(3 << 5)
+#define CRT_HOTPLUG_VOLTAGE_COMPARE_MASK	(3 << 5)
+#define CRT_HOTPLUG_DETECT_DELAY_1G		(0 << 4)
+#define CRT_HOTPLUG_DETECT_DELAY_2G		(1 << 4)
+#define CRT_HOTPLUG_DETECT_VOLTAGE_325MV	(0 << 2)
+#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV	(1 << 2)
+#define CRT_HOTPLUG_DETECT_MASK			0x000000F8
+
+#define PORT_HOTPLUG_STAT	0x61114
+#define CRT_HOTPLUG_INT_STATUS		(1 << 11)
+#define TV_HOTPLUG_INT_STATUS		(1 << 10)
+#define CRT_HOTPLUG_MONITOR_MASK	(3 << 8)
+#define CRT_HOTPLUG_MONITOR_COLOR	(3 << 8)
+#define CRT_HOTPLUG_MONITOR_MONO	(2 << 8)
+#define CRT_HOTPLUG_MONITOR_NONE	(0 << 8)
+#define SDVOC_HOTPLUG_INT_STATUS	(1 << 7)
+#define SDVOB_HOTPLUG_INT_STATUS	(1 << 6)
+
+#define SDVOB			0x61140
+#define SDVOC			0x61160
+#define SDVO_ENABLE			(1 << 31)
+#define SDVO_PIPE_B_SELECT		(1 << 30)
+#define SDVO_STALL_SELECT		(1 << 29)
+#define SDVO_INTERRUPT_ENABLE		(1 << 26)
+
+/**
+ * 915G/GM SDVO pixel multiplier.
+ *
+ * Programmed value is multiplier - 1, up to 5x.
+ *
+ * DPLL_MD_UDI_MULTIPLIER_MASK
+ */
+#define SDVO_PORT_MULTIPLY_MASK		(7 << 23)
+#define SDVO_PORT_MULTIPLY_SHIFT	23
+#define SDVO_PHASE_SELECT_MASK		(15 << 19)
+#define SDVO_PHASE_SELECT_DEFAULT	(6 << 19)
+#define SDVO_CLOCK_OUTPUT_INVERT	(1 << 18)
+#define SDVOC_GANG_MODE			(1 << 16)
+#define SDVO_BORDER_ENABLE		(1 << 7)
+#define SDVOB_PCIE_CONCURRENCY		(1 << 3)
+#define SDVO_DETECTED			(1 << 2)
+/* Bits to be preserved when writing */
+#define SDVOB_PRESERVE_MASK		((1 << 17) | (1 << 16) | (1 << 14))
+#define SDVOC_PRESERVE_MASK		(1 << 17)
+
+/*
+ * This register controls the LVDS output enable, pipe selection, and data
+ * format selection.
+ *
+ * All of the clock/data pairs are force powered down by power sequencing.
+ */
+#define LVDS			0x61180
+/*
+ * Enables the LVDS port.  This bit must be set before DPLLs are enabled, as
+ * the DPLL semantics change when the LVDS is assigned to that pipe.
+ */
+#define LVDS_PORT_EN			(1 << 31)
+/* Selects pipe B for LVDS data.  Must be set on pre-965. */
+#define LVDS_PIPEB_SELECT		(1 << 30)
+
+/* Turns on border drawing to allow centered display. */
+#define LVDS_BORDER_EN			(1 << 15)
+
+/*
+ * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
+ * pixel.
+ */
+#define LVDS_A0A2_CLKA_POWER_MASK	(3 << 8)
+#define LVDS_A0A2_CLKA_POWER_DOWN	(0 << 8)
+#define LVDS_A0A2_CLKA_POWER_UP		(3 << 8)
+/*
+ * Controls the A3 data pair, which contains the additional LSBs for 24 bit
+ * mode.  Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
+ * on.
+ */
+#define LVDS_A3_POWER_MASK		(3 << 6)
+#define LVDS_A3_POWER_DOWN		(0 << 6)
+#define LVDS_A3_POWER_UP		(3 << 6)
+/*
+ * Controls the CLKB pair.  This should only be set when LVDS_B0B3_POWER_UP
+ * is set.
+ */
+#define LVDS_CLKB_POWER_MASK		(3 << 4)
+#define LVDS_CLKB_POWER_DOWN		(0 << 4)
+#define LVDS_CLKB_POWER_UP		(3 << 4)
+/*
+ * Controls the B0-B3 data pairs.  This must be set to match the DPLL p2
+ * setting for whether we are in dual-channel mode.  The B3 pair will
+ * additionally only be powered up when LVDS_A3_POWER_UP is set.
+ */
+#define LVDS_B0B3_POWER_MASK		(3 << 2)
+#define LVDS_B0B3_POWER_DOWN		(0 << 2)
+#define LVDS_B0B3_POWER_UP		(3 << 2)
+
+#define PIPEACONF		0x70008
+#define PIPEACONF_ENABLE		(1 << 31)
+#define PIPEACONF_DISABLE		0
+#define PIPEACONF_DOUBLE_WIDE		(1 << 30)
+#define PIPECONF_ACTIVE			(1 << 30)
+#define I965_PIPECONF_ACTIVE		(1 << 30)
+#define PIPECONF_DSIPLL_LOCK		(1 << 29)
+#define PIPEACONF_SINGLE_WIDE		0
+#define PIPEACONF_PIPE_UNLOCKED		0
+#define PIPEACONF_DSR			(1 << 26)
+#define PIPEACONF_PIPE_LOCKED		(1 << 25)
+#define PIPEACONF_PALETTE		0
+#define PIPECONF_FORCE_BORDER		(1 << 25)
+#define PIPEACONF_GAMMA			(1 << 24)
+#define PIPECONF_PROGRESSIVE		(0 << 21)
+#define PIPECONF_INTERLACE_W_FIELD_INDICATION	(6 << 21)
+#define PIPECONF_INTERLACE_FIELD_0_ONLY		(7 << 21)
+#define PIPECONF_PLANE_OFF		(1 << 19)
+#define PIPECONF_CURSOR_OFF		(1 << 18)
+
+#define PIPEBCONF		0x71008
+#define PIPEBCONF_ENABLE		(1 << 31)
+#define PIPEBCONF_DISABLE		0
+#define PIPEBCONF_DOUBLE_WIDE		(1 << 30)
+#define PIPEBCONF_DISABLE		0
+#define PIPEBCONF_GAMMA			(1 << 24)
+#define PIPEBCONF_PALETTE		0
+
+#define PIPECCONF		0x72008
+
+#define PIPEBGCMAXRED		0x71010
+#define PIPEBGCMAXGREEN		0x71014
+#define PIPEBGCMAXBLUE		0x71018
+
+#define PIPEASTAT		0x70024
+#define PIPEBSTAT		0x71024
+#define PIPECSTAT		0x72024
+#define PIPE_VBLANK_INTERRUPT_STATUS		(1UL << 1)
+#define PIPE_START_VBLANK_INTERRUPT_STATUS	(1UL << 2)
+#define PIPE_VBLANK_CLEAR			(1 << 1)
+#define PIPE_VBLANK_STATUS			(1 << 1)
+#define PIPE_TE_STATUS				(1UL << 6)
+#define PIPE_DPST_EVENT_STATUS			(1UL << 7)
+#define PIPE_VSYNC_CLEAR			(1UL << 9)
+#define PIPE_VSYNC_STATUS			(1UL << 9)
+#define PIPE_HDMI_AUDIO_UNDERRUN_STATUS		(1UL << 10)
+#define PIPE_HDMI_AUDIO_BUFFER_DONE_STATUS	(1UL << 11)
+#define PIPE_VBLANK_INTERRUPT_ENABLE		(1UL << 17)
+#define PIPE_START_VBLANK_INTERRUPT_ENABLE	(1UL << 18)
+#define PIPE_TE_ENABLE				(1UL << 22)
+#define PIPE_DPST_EVENT_ENABLE			(1UL << 23)
+#define PIPE_VSYNC_ENABL			(1UL << 25)
+#define PIPE_HDMI_AUDIO_UNDERRUN		(1UL << 26)
+#define PIPE_HDMI_AUDIO_BUFFER_DONE		(1UL << 27)
+#define PIPE_HDMI_AUDIO_INT_MASK		(PIPE_HDMI_AUDIO_UNDERRUN | \
+						PIPE_HDMI_AUDIO_BUFFER_DONE)
+#define PIPE_EVENT_MASK ((1 << 29)|(1 << 28)|(1 << 27)|(1 << 26)|(1 << 24)|(1 << 23)|(1 << 22)|(1 << 21)|(1 << 20)|(1 << 16))
+#define PIPE_VBLANK_MASK ((1 << 25)|(1 << 24)|(1 << 18)|(1 << 17))
+#define HISTOGRAM_INT_CONTROL		0x61268
+#define HISTOGRAM_BIN_DATA		0X61264
+#define HISTOGRAM_LOGIC_CONTROL		0x61260
+#define PWM_CONTROL_LOGIC		0x61250
+#define PIPE_HOTPLUG_INTERRUPT_STATUS		(1UL << 10)
+#define HISTOGRAM_INTERRUPT_ENABLE		(1UL << 31)
+#define HISTOGRAM_LOGIC_ENABLE			(1UL << 31)
+#define PWM_LOGIC_ENABLE			(1UL << 31)
+#define PWM_PHASEIN_ENABLE			(1UL << 25)
+#define PWM_PHASEIN_INT_ENABLE			(1UL << 24)
+#define PWM_PHASEIN_VB_COUNT			0x00001f00
+#define PWM_PHASEIN_INC				0x0000001f
+#define HISTOGRAM_INT_CTRL_CLEAR		(1UL << 30)
+#define DPST_YUV_LUMA_MODE			0
+
+struct dpst_ie_histogram_control {
+	union {
+		uint32_t data;
+		struct {
+			uint32_t bin_reg_index:7;
+			uint32_t reserved:4;
+			uint32_t bin_reg_func_select:1;
+			uint32_t sync_to_phase_in:1;
+			uint32_t alt_enhancement_mode:2;
+			uint32_t reserved1:1;
+			uint32_t sync_to_phase_in_count:8;
+			uint32_t histogram_mode_select:1;
+			uint32_t reserved2:4;
+			uint32_t ie_pipe_assignment:1;
+			uint32_t ie_mode_table_enabled:1;
+			uint32_t ie_histogram_enable:1;
+		};
+	};
+};
+
+struct dpst_guardband {
+	union {
+		uint32_t data;
+		struct {
+			uint32_t guardband:22;
+			uint32_t guardband_interrupt_delay:8;
+			uint32_t interrupt_status:1;
+			uint32_t interrupt_enable:1;
+		};
+	};
+};
+
+#define PIPEAFRAMEHIGH		0x70040
+#define PIPEAFRAMEPIXEL		0x70044
+#define PIPEBFRAMEHIGH		0x71040
+#define PIPEBFRAMEPIXEL		0x71044
+#define PIPECFRAMEHIGH		0x72040
+#define PIPECFRAMEPIXEL		0x72044
+#define PIPE_FRAME_HIGH_MASK	0x0000ffff
+#define PIPE_FRAME_HIGH_SHIFT	0
+#define PIPE_FRAME_LOW_MASK	0xff000000
+#define PIPE_FRAME_LOW_SHIFT	24
+#define PIPE_PIXEL_MASK		0x00ffffff
+#define PIPE_PIXEL_SHIFT	0
+
+#define DSPARB			0x70030
+#define DSPFW1			0x70034
+#define DSPFW2			0x70038
+#define DSPFW3			0x7003c
+#define DSPFW4			0x70050
+#define DSPFW5			0x70054
+#define DSPFW6			0x70058
+#define DSPCHICKENBIT		0x70400
+#define DSPACNTR		0x70180
+#define DSPBCNTR		0x71180
+#define DSPCCNTR		0x72180
+#define DISPLAY_PLANE_ENABLE			(1 << 31)
+#define DISPLAY_PLANE_DISABLE			0
+#define DISPPLANE_GAMMA_ENABLE			(1 << 30)
+#define DISPPLANE_GAMMA_DISABLE			0
+#define DISPPLANE_PIXFORMAT_MASK		(0xf << 26)
+#define DISPPLANE_8BPP				(0x2 << 26)
+#define DISPPLANE_15_16BPP			(0x4 << 26)
+#define DISPPLANE_16BPP				(0x5 << 26)
+#define DISPPLANE_32BPP_NO_ALPHA		(0x6 << 26)
+#define DISPPLANE_32BPP				(0x7 << 26)
+#define DISPPLANE_STEREO_ENABLE			(1 << 25)
+#define DISPPLANE_STEREO_DISABLE		0
+#define DISPPLANE_SEL_PIPE_MASK			(1 << 24)
+#define DISPPLANE_SEL_PIPE_POS			24
+#define DISPPLANE_SEL_PIPE_A			0
+#define DISPPLANE_SEL_PIPE_B			(1 << 24)
+#define DISPPLANE_SRC_KEY_ENABLE		(1 << 22)
+#define DISPPLANE_SRC_KEY_DISABLE		0
+#define DISPPLANE_LINE_DOUBLE			(1 << 20)
+#define DISPPLANE_NO_LINE_DOUBLE		0
+#define DISPPLANE_STEREO_POLARITY_FIRST		0
+#define DISPPLANE_STEREO_POLARITY_SECOND	(1 << 18)
+/* plane B only */
+#define DISPPLANE_ALPHA_TRANS_ENABLE		(1 << 15)
+#define DISPPLANE_ALPHA_TRANS_DISABLE		0
+#define DISPPLANE_SPRITE_ABOVE_DISPLAYA		0
+#define DISPPLANE_SPRITE_ABOVE_OVERLAY		(1)
+#define DISPPLANE_BOTTOM			(4)
+
+#define DSPABASE		0x70184
+#define DSPALINOFF		0x70184
+#define DSPASTRIDE		0x70188
+
+#define DSPBBASE		0x71184
+#define DSPBLINOFF		0X71184
+#define DSPBADDR		DSPBBASE
+#define DSPBSTRIDE		0x71188
+
+#define DSPCBASE		0x72184
+#define DSPCLINOFF		0x72184
+#define DSPCSTRIDE		0x72188
+
+#define DSPAKEYVAL		0x70194
+#define DSPAKEYMASK		0x70198
+
+#define DSPAPOS			0x7018C	/* reserved */
+#define DSPASIZE		0x70190
+#define DSPBPOS			0x7118C
+#define DSPBSIZE		0x71190
+#define DSPCPOS			0x7218C
+#define DSPCSIZE		0x72190
+
+#define DSPASURF		0x7019C
+#define DSPATILEOFF		0x701A4
+
+#define DSPBSURF		0x7119C
+#define DSPBTILEOFF		0x711A4
+
+#define DSPCSURF		0x7219C
+#define DSPCTILEOFF		0x721A4
+#define DSPCKEYMAXVAL		0x721A0
+#define DSPCKEYMINVAL		0x72194
+#define DSPCKEYMSK		0x72198
+
+#define VGACNTRL		0x71400
+#define VGA_DISP_DISABLE		(1 << 31)
+#define VGA_2X_MODE			(1 << 30)
+#define VGA_PIPE_B_SELECT		(1 << 29)
+
+/*
+ * Overlay registers
+ */
+#define OV_C_OFFSET		0x08000
+#define OV_OVADD		0x30000
+#define OV_DOVASTA		0x30008
+# define OV_PIPE_SELECT			((1 << 6)|(1 << 7))
+# define OV_PIPE_SELECT_POS		6
+# define OV_PIPE_A			0
+# define OV_PIPE_C			1
+#define OV_OGAMC5		0x30010
+#define OV_OGAMC4		0x30014
+#define OV_OGAMC3		0x30018
+#define OV_OGAMC2		0x3001C
+#define OV_OGAMC1		0x30020
+#define OV_OGAMC0		0x30024
+#define OVC_OVADD		0x38000
+#define OVC_DOVCSTA		0x38008
+#define OVC_OGAMC5		0x38010
+#define OVC_OGAMC4		0x38014
+#define OVC_OGAMC3		0x38018
+#define OVC_OGAMC2		0x3801C
+#define OVC_OGAMC1		0x38020
+#define OVC_OGAMC0		0x38024
+
+/*
+ * Some BIOS scratch area registers.  The 845 (and 830?) store the amount
+ * of video memory available to the BIOS in SWF1.
+ */
+#define SWF0			0x71410
+#define SWF1			0x71414
+#define SWF2			0x71418
+#define SWF3			0x7141c
+#define SWF4			0x71420
+#define SWF5			0x71424
+#define SWF6			0x71428
+
+/*
+ * 855 scratch registers.
+ */
+#define SWF00			0x70410
+#define SWF01			0x70414
+#define SWF02			0x70418
+#define SWF03			0x7041c
+#define SWF04			0x70420
+#define SWF05			0x70424
+#define SWF06			0x70428
+
+#define SWF10			SWF0
+#define SWF11			SWF1
+#define SWF12			SWF2
+#define SWF13			SWF3
+#define SWF14			SWF4
+#define SWF15			SWF5
+#define SWF16			SWF6
+
+#define SWF30			0x72414
+#define SWF31			0x72418
+#define SWF32			0x7241c
+
+
+/*
+ * Palette registers
+ */
+#define PALETTE_A		0x0a000
+#define PALETTE_B		0x0a800
+#define PALETTE_C		0x0ac00
+
+/* Cursor A & B regs */
+#define CURACNTR		0x70080
+#define CURSOR_MODE_DISABLE		0x00
+#define CURSOR_MODE_64_32B_AX		0x07
+#define CURSOR_MODE_64_ARGB_AX		((1 << 5) | CURSOR_MODE_64_32B_AX)
+#define MCURSOR_GAMMA_ENABLE		(1 << 26)
+#define CURABASE		0x70084
+#define CURAPOS			0x70088
+#define CURSOR_POS_MASK			0x007FF
+#define CURSOR_POS_SIGN			0x8000
+#define CURSOR_X_SHIFT			0
+#define CURSOR_Y_SHIFT			16
+#define CURBCNTR		0x700c0
+#define CURBBASE		0x700c4
+#define CURBPOS			0x700c8
+#define CURCCNTR		0x700e0
+#define CURCBASE		0x700e4
+#define CURCPOS			0x700e8
+
+/*
+ * Interrupt Registers
+ */
+#define IER			0x020a0
+#define IIR			0x020a4
+#define IMR			0x020a8
+#define ISR			0x020ac
+
+/*
+ * MOORESTOWN delta registers
+ */
+#define MRST_DPLL_A		0x0f014
+#define MDFLD_DPLL_B		0x0f018
+#define MDFLD_INPUT_REF_SEL		(1 << 14)
+#define MDFLD_VCO_SEL			(1 << 16)
+#define DPLLA_MODE_LVDS			(2 << 26)	/* mrst */
+#define MDFLD_PLL_LATCHEN		(1 << 28)
+#define MDFLD_PWR_GATE_EN		(1 << 30)
+#define MDFLD_P1_MASK			(0x1FF << 17)
+#define MRST_FPA0		0x0f040
+#define MRST_FPA1		0x0f044
+#define MDFLD_DPLL_DIV0		0x0f048
+#define MDFLD_DPLL_DIV1		0x0f04c
+#define MRST_PERF_MODE		0x020f4
+
+/*
+ * MEDFIELD HDMI registers
+ */
+#define HDMIPHYMISCCTL		0x61134
+#define HDMI_PHY_POWER_DOWN		0x7f
+#define HDMIB_CONTROL		0x61140
+#define HDMIB_PORT_EN			(1 << 31)
+#define HDMIB_PIPE_B_SELECT		(1 << 30)
+#define HDMIB_NULL_PACKET		(1 << 9)
+#define HDMIB_HDCP_PORT			(1 << 5)
+
+/* #define LVDS			0x61180 */
+#define MRST_PANEL_8TO6_DITHER_ENABLE	(1 << 25)
+#define MRST_PANEL_24_DOT_1_FORMAT	(1 << 24)
+#define LVDS_A3_POWER_UP_0_OUTPUT	(1 << 6)
+
+#define MIPI			0x61190
+#define MIPI_C			0x62190
+#define MIPI_PORT_EN			(1 << 31)
+/* Turns on border drawing to allow centered display. */
+#define SEL_FLOPPED_HSTX		(1 << 23)
+#define PASS_FROM_SPHY_TO_AFE		(1 << 16)
+#define MIPI_BORDER_EN			(1 << 15)
+#define MIPIA_3LANE_MIPIC_1LANE		0x1
+#define MIPIA_2LANE_MIPIC_2LANE		0x2
+#define TE_TRIGGER_DSI_PROTOCOL		(1 << 2)
+#define TE_TRIGGER_GPIO_PIN		(1 << 3)
+#define MIPI_TE_COUNT		0x61194
+
+/* #define PP_CONTROL	0x61204 */
+#define POWER_DOWN_ON_RESET		(1 << 1)
+
+/* #define PFIT_CONTROL	0x61230 */
+#define PFIT_PIPE_SELECT		(3 << 29)
+#define PFIT_PIPE_SELECT_SHIFT		(29)
+
+/* #define BLC_PWM_CTL		0x61254 */
+#define MRST_BACKLIGHT_MODULATION_FREQ_SHIFT	(16)
+#define MRST_BACKLIGHT_MODULATION_FREQ_MASK	(0xffff << 16)
+
+/* #define PIPEACONF 0x70008 */
+#define PIPEACONF_PIPE_STATE		(1 << 30)
+/* #define DSPACNTR		0x70180 */
+
+#define MRST_DSPABASE		0x7019c
+#define MRST_DSPBBASE		0x7119c
+#define MDFLD_DSPCBASE		0x7219c
+
+/*
+ * Moorestown registers.
+ */
+
+/*
+ *	MIPI IP registers
+ */
+#define MIPIC_REG_OFFSET		0x800
+
+#define DEVICE_READY_REG		0xb000
+#define LP_OUTPUT_HOLD				(1 << 16)
+#define EXIT_ULPS_DEV_READY			0x3
+#define LP_OUTPUT_HOLD_RELEASE			0x810000
+# define ENTERING_ULPS				(2 << 1)
+# define EXITING_ULPS				(1 << 1)
+# define ULPS_MASK				(3 << 1)
+# define BUS_POSSESSION				(1 << 3)
+#define INTR_STAT_REG			0xb004
+#define RX_SOT_ERROR				(1 << 0)
+#define RX_SOT_SYNC_ERROR			(1 << 1)
+#define RX_ESCAPE_MODE_ENTRY_ERROR		(1 << 3)
+#define RX_LP_TX_SYNC_ERROR			(1 << 4)
+#define RX_HS_RECEIVE_TIMEOUT_ERROR		(1 << 5)
+#define RX_FALSE_CONTROL_ERROR			(1 << 6)
+#define RX_ECC_SINGLE_BIT_ERROR			(1 << 7)
+#define RX_ECC_MULTI_BIT_ERROR			(1 << 8)
+#define RX_CHECKSUM_ERROR			(1 << 9)
+#define RX_DSI_DATA_TYPE_NOT_RECOGNIZED		(1 << 10)
+#define RX_DSI_VC_ID_INVALID			(1 << 11)
+#define TX_FALSE_CONTROL_ERROR			(1 << 12)
+#define TX_ECC_SINGLE_BIT_ERROR			(1 << 13)
+#define TX_ECC_MULTI_BIT_ERROR			(1 << 14)
+#define TX_CHECKSUM_ERROR			(1 << 15)
+#define TX_DSI_DATA_TYPE_NOT_RECOGNIZED		(1 << 16)
+#define TX_DSI_VC_ID_INVALID			(1 << 17)
+#define HIGH_CONTENTION				(1 << 18)
+#define LOW_CONTENTION				(1 << 19)
+#define DPI_FIFO_UNDER_RUN			(1 << 20)
+#define HS_TX_TIMEOUT				(1 << 21)
+#define LP_RX_TIMEOUT				(1 << 22)
+#define TURN_AROUND_ACK_TIMEOUT			(1 << 23)
+#define ACK_WITH_NO_ERROR			(1 << 24)
+#define HS_GENERIC_WR_FIFO_FULL			(1 << 27)
+#define LP_GENERIC_WR_FIFO_FULL			(1 << 28)
+#define SPL_PKT_SENT				(1 << 30)
+#define INTR_EN_REG			0xb008
+#define DSI_FUNC_PRG_REG		0xb00c
+#define DPI_CHANNEL_NUMBER_POS			0x03
+#define DBI_CHANNEL_NUMBER_POS			0x05
+#define FMT_DPI_POS				0x07
+#define FMT_DBI_POS				0x0A
+#define DBI_DATA_WIDTH_POS			0x0D
+
+/* DPI PIXEL FORMATS */
+#define RGB_565_FMT				0x01	/* RGB 565 FORMAT */
+#define RGB_666_FMT				0x02	/* RGB 666 FORMAT */
+#define LRGB_666_FMT				0x03	/* RGB LOOSELY PACKED
+							 * 666 FORMAT
+							 */
+#define RGB_888_FMT				0x04	/* RGB 888 FORMAT */
+#define VIRTUAL_CHANNEL_NUMBER_0		0x00	/* Virtual channel 0 */
+#define VIRTUAL_CHANNEL_NUMBER_1		0x01	/* Virtual channel 1 */
+#define VIRTUAL_CHANNEL_NUMBER_2		0x02	/* Virtual channel 2 */
+#define VIRTUAL_CHANNEL_NUMBER_3		0x03	/* Virtual channel 3 */
+
+#define DBI_NOT_SUPPORTED			0x00	/* command mode
+							 * is not supported
+							 */
+#define DBI_DATA_WIDTH_16BIT			0x01	/* 16 bit data */
+#define DBI_DATA_WIDTH_9BIT			0x02	/* 9 bit data */
+#define DBI_DATA_WIDTH_8BIT			0x03	/* 8 bit data */
+#define DBI_DATA_WIDTH_OPT1			0x04	/* option 1 */
+#define DBI_DATA_WIDTH_OPT2			0x05	/* option 2 */
+
+#define HS_TX_TIMEOUT_REG		0xb010
+#define LP_RX_TIMEOUT_REG		0xb014
+#define TURN_AROUND_TIMEOUT_REG		0xb018
+#define DEVICE_RESET_REG		0xb01C
+#define DPI_RESOLUTION_REG		0xb020
+#define RES_V_POS				0x10
+#define DBI_RESOLUTION_REG		0xb024 /* Reserved for MDFLD */
+#define HORIZ_SYNC_PAD_COUNT_REG	0xb028
+#define HORIZ_BACK_PORCH_COUNT_REG	0xb02C
+#define HORIZ_FRONT_PORCH_COUNT_REG	0xb030
+#define HORIZ_ACTIVE_AREA_COUNT_REG	0xb034
+#define VERT_SYNC_PAD_COUNT_REG		0xb038
+#define VERT_BACK_PORCH_COUNT_REG	0xb03c
+#define VERT_FRONT_PORCH_COUNT_REG	0xb040
+#define HIGH_LOW_SWITCH_COUNT_REG	0xb044
+#define DPI_CONTROL_REG			0xb048
+#define DPI_SHUT_DOWN				(1 << 0)
+#define DPI_TURN_ON				(1 << 1)
+#define DPI_COLOR_MODE_ON			(1 << 2)
+#define DPI_COLOR_MODE_OFF			(1 << 3)
+#define DPI_BACK_LIGHT_ON			(1 << 4)
+#define DPI_BACK_LIGHT_OFF			(1 << 5)
+#define DPI_LP					(1 << 6)
+#define DPI_DATA_REG			0xb04c
+#define DPI_BACK_LIGHT_ON_DATA			0x07
+#define DPI_BACK_LIGHT_OFF_DATA			0x17
+#define INIT_COUNT_REG			0xb050
+#define MAX_RET_PAK_REG			0xb054
+#define VIDEO_FMT_REG			0xb058
+#define COMPLETE_LAST_PCKT			(1 << 2)
+#define EOT_DISABLE_REG			0xb05c
+#define ENABLE_CLOCK_STOPPING			(1 << 1)
+#define LP_BYTECLK_REG			0xb060
+#define LP_GEN_DATA_REG			0xb064
+#define HS_GEN_DATA_REG			0xb068
+#define LP_GEN_CTRL_REG			0xb06C
+#define HS_GEN_CTRL_REG			0xb070
+#define DCS_CHANNEL_NUMBER_POS		0x6
+#define MCS_COMMANDS_POS		0x8
+#define WORD_COUNTS_POS			0x8
+#define MCS_PARAMETER_POS			0x10
+#define GEN_FIFO_STAT_REG		0xb074
+#define HS_DATA_FIFO_FULL			(1 << 0)
+#define HS_DATA_FIFO_HALF_EMPTY			(1 << 1)
+#define HS_DATA_FIFO_EMPTY			(1 << 2)
+#define LP_DATA_FIFO_FULL			(1 << 8)
+#define LP_DATA_FIFO_HALF_EMPTY			(1 << 9)
+#define LP_DATA_FIFO_EMPTY			(1 << 10)
+#define HS_CTRL_FIFO_FULL			(1 << 16)
+#define HS_CTRL_FIFO_HALF_EMPTY			(1 << 17)
+#define HS_CTRL_FIFO_EMPTY			(1 << 18)
+#define LP_CTRL_FIFO_FULL			(1 << 24)
+#define LP_CTRL_FIFO_HALF_EMPTY			(1 << 25)
+#define LP_CTRL_FIFO_EMPTY			(1 << 26)
+#define DBI_FIFO_EMPTY				(1 << 27)
+#define DPI_FIFO_EMPTY				(1 << 28)
+#define HS_LS_DBI_ENABLE_REG		0xb078
+#define TXCLKESC_REG			0xb07c
+#define DPHY_PARAM_REG			0xb080
+#define DBI_BW_CTRL_REG			0xb084
+#define CLK_LANE_SWT_REG		0xb088
+
+/*
+ * MIPI Adapter registers
+ */
+#define MIPI_CONTROL_REG		0xb104
+#define MIPI_2X_CLOCK_BITS			((1 << 0) | (1 << 1))
+#define MIPI_DATA_ADDRESS_REG		0xb108
+#define MIPI_DATA_LENGTH_REG		0xb10C
+#define MIPI_COMMAND_ADDRESS_REG	0xb110
+#define MIPI_COMMAND_LENGTH_REG		0xb114
+#define MIPI_READ_DATA_RETURN_REG0	0xb118
+#define MIPI_READ_DATA_RETURN_REG1	0xb11C
+#define MIPI_READ_DATA_RETURN_REG2	0xb120
+#define MIPI_READ_DATA_RETURN_REG3	0xb124
+#define MIPI_READ_DATA_RETURN_REG4	0xb128
+#define MIPI_READ_DATA_RETURN_REG5	0xb12C
+#define MIPI_READ_DATA_RETURN_REG6	0xb130
+#define MIPI_READ_DATA_RETURN_REG7	0xb134
+#define MIPI_READ_DATA_VALID_REG	0xb138
+
+/* DBI COMMANDS */
+#define soft_reset			0x01
+/*
+ *	The display module performs a software reset.
+ *	Registers are written with their SW Reset default values.
+ */
+#define get_power_mode			0x0a
+/*
+ *	The display module returns the current power mode
+ */
+#define get_address_mode		0x0b
+/*
+ *	The display module returns the current status.
+ */
+#define get_pixel_format		0x0c
+/*
+ *	This command gets the pixel format for the RGB image data
+ *	used by the interface.
+ */
+#define get_display_mode		0x0d
+/*
+ *	The display module returns the Display Image Mode status.
+ */
+#define get_signal_mode			0x0e
+/*
+ *	The display module returns the Display Signal Mode.
+ */
+#define get_diagnostic_result		0x0f
+/*
+ *	The display module returns the self-diagnostic results following
+ *	a Sleep Out command.
+ */
+#define enter_sleep_mode		0x10
+/*
+ *	This command causes the display module to enter the Sleep mode.
+ *	In this mode, all unnecessary blocks inside the display module are
+ *	disabled except interface communication. This is the lowest power
+ *	mode the display module supports.
+ */
+#define exit_sleep_mode			0x11
+/*
+ *	This command causes the display module to exit Sleep mode.
+ *	All blocks inside the display module are enabled.
+ */
+#define enter_partial_mode		0x12
+/*
+ *	This command causes the display module to enter the Partial Display
+ *	Mode. The Partial Display Mode window is described by the
+ *	set_partial_area command.
+ */
+#define enter_normal_mode		0x13
+/*
+ *	This command causes the display module to enter the Normal mode.
+ *	Normal Mode is defined as Partial Display mode and Scroll mode are off
+ */
+#define exit_invert_mode		0x20
+/*
+ *	This command causes the display module to stop inverting the image
+ *	data on the display device. The frame memory contents remain unchanged.
+ *	No status bits are changed.
+ */
+#define enter_invert_mode		0x21
+/*
+ *	This command causes the display module to invert the image data only on
+ *	the display device. The frame memory contents remain unchanged.
+ *	No status bits are changed.
+ */
+#define set_gamma_curve			0x26
+/*
+ *	This command selects the desired gamma curve for the display device.
+ *	Four fixed gamma curves are defined in section DCS spec.
+ */
+#define set_display_off			0x28
+/* ************************************************************************* *\
+This command causes the display module to stop displaying the image data
+on the display device. The frame memory contents remain unchanged.
+No status bits are changed.
+\* ************************************************************************* */
+#define set_display_on			0x29
+/* ************************************************************************* *\
+This command causes the display module to start displaying the image data
+on the display device. The frame memory contents remain unchanged.
+No status bits are changed.
+\* ************************************************************************* */
+#define set_column_address		0x2a
+/*
+ *	This command defines the column extent of the frame memory accessed by
+ *	the hostprocessor with the read_memory_continue and
+ *	write_memory_continue commands.
+ *	No status bits are changed.
+ */
+#define set_page_addr			0x2b
+/*
+ *	This command defines the page extent of the frame memory accessed by
+ *	the host processor with the write_memory_continue and
+ *	read_memory_continue command.
+ *	No status bits are changed.
+ */
+#define write_mem_start			0x2c
+/*
+ *	This command transfers image data from the host processor to the
+ *	display modules frame memory starting at the pixel location specified
+ *	by preceding set_column_address and set_page_address commands.
+ */
+#define set_partial_area		0x30
+/*
+ *	This command defines the Partial Display mode s display area.
+ *	There are two parameters associated with this command, the first
+ *	defines the Start Row (SR) and the second the End Row (ER). SR and ER
+ *	refer to the Frame Memory Line Pointer.
+ */
+#define set_scroll_area			0x33
+/*
+ *	This command defines the display modules Vertical Scrolling Area.
+ */
+#define set_tear_off			0x34
+/*
+ *	This command turns off the display modules Tearing Effect output
+ *	signal on the TE signal line.
+ */
+#define set_tear_on			0x35
+/*
+ *	This command turns on the display modules Tearing Effect output signal
+ *	on the TE signal line.
+ */
+#define set_address_mode		0x36
+/*
+ *	This command sets the data order for transfers from the host processor
+ *	to display modules frame memory,bits B[7:5] and B3, and from the
+ *	display modules frame memory to the display device, bits B[2:0] and B4.
+ */
+#define set_scroll_start		0x37
+/*
+ *	This command sets the start of the vertical scrolling area in the frame
+ *	memory. The vertical scrolling area is fully defined when this command
+ *	is used with the set_scroll_area command The set_scroll_start command
+ *	has one parameter, the Vertical Scroll Pointer. The VSP defines the
+ *	line in the frame memory that is written to the display device as the
+ *	first line of the vertical scroll area.
+ */
+#define exit_idle_mode			0x38
+/*
+ *	This command causes the display module to exit Idle mode.
+ */
+#define enter_idle_mode			0x39
+/*
+ *	This command causes the display module to enter Idle Mode.
+ *	In Idle Mode, color expression is reduced. Colors are shown on the
+ *	display device using the MSB of each of the R, G and B color
+ *	components in the frame memory
+ */
+#define set_pixel_format		0x3a
+/*
+ *	This command sets the pixel format for the RGB image data used by the
+ *	interface.
+ *	Bits D[6:4]  DPI Pixel Format Definition
+ *	Bits D[2:0]  DBI Pixel Format Definition
+ *	Bits D7 and D3 are not used.
+ */
+#define DCS_PIXEL_FORMAT_3bpp		0x1
+#define DCS_PIXEL_FORMAT_8bpp		0x2
+#define DCS_PIXEL_FORMAT_12bpp		0x3
+#define DCS_PIXEL_FORMAT_16bpp		0x5
+#define DCS_PIXEL_FORMAT_18bpp		0x6
+#define DCS_PIXEL_FORMAT_24bpp		0x7
+
+#define write_mem_cont			0x3c
+
+/*
+ *	This command transfers image data from the host processor to the
+ *	display module's frame memory continuing from the pixel location
+ *	following the previous write_memory_continue or write_memory_start
+ *	command.
+ */
+#define set_tear_scanline		0x44
+/*
+ *	This command turns on the display modules Tearing Effect output signal
+ *	on the TE signal line when the display module reaches line N.
+ */
+#define get_scanline			0x45
+/*
+ *	The display module returns the current scanline, N, used to update the
+ *	 display device. The total number of scanlines on a display device is
+ *	defined as VSYNC + VBP + VACT + VFP.The first scanline is defined as
+ *	the first line of V Sync and is denoted as Line 0.
+ *	When in Sleep Mode, the value returned by get_scanline is undefined.
+ */
+
+/* MCS or Generic COMMANDS */
+/* MCS/generic data type */
+#define GEN_SHORT_WRITE_0	0x03  /* generic short write, no parameters */
+#define GEN_SHORT_WRITE_1	0x13  /* generic short write, 1 parameters */
+#define GEN_SHORT_WRITE_2	0x23  /* generic short write, 2 parameters */
+#define GEN_READ_0		0x04  /* generic read, no parameters */
+#define GEN_READ_1		0x14  /* generic read, 1 parameters */
+#define GEN_READ_2		0x24  /* generic read, 2 parameters */
+#define GEN_LONG_WRITE		0x29  /* generic long write */
+#define MCS_SHORT_WRITE_0	0x05  /* MCS short write, no parameters */
+#define MCS_SHORT_WRITE_1	0x15  /* MCS short write, 1 parameters */
+#define MCS_READ		0x06  /* MCS read, no parameters */
+#define MCS_LONG_WRITE		0x39  /* MCS long write */
+/* MCS/generic commands */
+/* TPO MCS */
+#define write_display_profile		0x50
+#define write_display_brightness	0x51
+#define write_ctrl_display		0x53
+#define write_ctrl_cabc			0x55
+  #define UI_IMAGE		0x01
+  #define STILL_IMAGE		0x02
+  #define MOVING_IMAGE		0x03
+#define write_hysteresis		0x57
+#define write_gamma_setting		0x58
+#define write_cabc_min_bright		0x5e
+#define write_kbbc_profile		0x60
+/* TMD MCS */
+#define tmd_write_display_brightness 0x8c
+
+/*
+ *	This command is used to control ambient light, panel backlight
+ *	brightness and gamma settings.
+ */
+#define BRIGHT_CNTL_BLOCK_ON	(1 << 5)
+#define AMBIENT_LIGHT_SENSE_ON	(1 << 4)
+#define DISPLAY_DIMMING_ON	(1 << 3)
+#define BACKLIGHT_ON		(1 << 2)
+#define DISPLAY_BRIGHTNESS_AUTO	(1 << 1)
+#define GAMMA_AUTO		(1 << 0)
+
+/* DCS Interface Pixel Formats */
+#define DCS_PIXEL_FORMAT_3BPP	0x1
+#define DCS_PIXEL_FORMAT_8BPP	0x2
+#define DCS_PIXEL_FORMAT_12BPP	0x3
+#define DCS_PIXEL_FORMAT_16BPP	0x5
+#define DCS_PIXEL_FORMAT_18BPP	0x6
+#define DCS_PIXEL_FORMAT_24BPP	0x7
+/* ONE PARAMETER READ DATA */
+#define addr_mode_data		0xfc
+#define diag_res_data		0x00
+#define disp_mode_data		0x23
+#define pxl_fmt_data		0x77
+#define pwr_mode_data		0x74
+#define sig_mode_data		0x00
+/* TWO PARAMETERS READ DATA */
+#define scanline_data1		0xff
+#define scanline_data2		0xff
+#define NON_BURST_MODE_SYNC_PULSE	0x01	/* Non Burst Mode
+						 * with Sync Pulse
+						 */
+#define NON_BURST_MODE_SYNC_EVENTS	0x02	/* Non Burst Mode
+						 * with Sync events
+						 */
+#define BURST_MODE			0x03	/* Burst Mode */
+#define DBI_COMMAND_BUFFER_SIZE		0x240   /* 0x32 */    /* 0x120 */
+						/* Allocate at least
+						 * 0x100 Byte with 32
+						 * byte alignment
+						 */
+#define DBI_DATA_BUFFER_SIZE		0x120	/* Allocate at least
+						 * 0x100 Byte with 32
+						 * byte alignment
+						 */
+#define DBI_CB_TIME_OUT			0xFFFF
+
+#define GEN_FB_TIME_OUT			2000
+
+#define SKU_83				0x01
+#define SKU_100				0x02
+#define SKU_100L			0x04
+#define SKU_BYPASS			0x08
+
+/* Some handy macros for playing with bitfields. */
+#define PSB_MASK(high, low) (((1<<((high)-(low)+1))-1)<<(low))
+#define SET_FIELD(value, field) (((value) << field ## _SHIFT) & field ## _MASK)
+#define GET_FIELD(word, field) (((word)  & field ## _MASK) >> field ## _SHIFT)
+
+#define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a)))
+
+/* PCI config space */
+
+#define SB_PCKT         0x02100 /* cedarview */
+# define SB_OPCODE_MASK                         PSB_MASK(31, 16)
+# define SB_OPCODE_SHIFT                        16
+# define SB_OPCODE_READ                         0
+# define SB_OPCODE_WRITE                        1
+# define SB_DEST_MASK                           PSB_MASK(15, 8)
+# define SB_DEST_SHIFT                          8
+# define SB_DEST_DPLL                           0x88
+# define SB_BYTE_ENABLE_MASK                    PSB_MASK(7, 4)
+# define SB_BYTE_ENABLE_SHIFT                   4
+# define SB_BUSY                                (1 << 0)
+
+
+/* 32-bit value read/written from the DPIO reg. */
+#define SB_DATA		0x02104 /* cedarview */
+/* 32-bit address of the DPIO reg to be read/written. */
+#define SB_ADDR		0x02108 /* cedarview */
+#define DPIO_CFG	0x02110 /* cedarview */
+# define DPIO_MODE_SELECT_1			(1 << 3)
+# define DPIO_MODE_SELECT_0			(1 << 2)
+# define DPIO_SFR_BYPASS			(1 << 1)
+/* reset is active low */
+# define DPIO_CMN_RESET_N			(1 << 0)
+
+/* Cedarview sideband registers */
+#define _SB_M_A			0x8008
+#define _SB_M_B			0x8028
+#define SB_M(pipe) _PIPE(pipe, _SB_M_A, _SB_M_B)
+# define SB_M_DIVIDER_MASK			(0xFF << 24)
+# define SB_M_DIVIDER_SHIFT			24
+
+#define _SB_N_VCO_A		0x8014
+#define _SB_N_VCO_B		0x8034
+#define SB_N_VCO(pipe) _PIPE(pipe, _SB_N_VCO_A, _SB_N_VCO_B)
+#define SB_N_VCO_SEL_MASK			PSB_MASK(31, 30)
+#define SB_N_VCO_SEL_SHIFT			30
+#define SB_N_DIVIDER_MASK			PSB_MASK(29, 26)
+#define SB_N_DIVIDER_SHIFT			26
+#define SB_N_CB_TUNE_MASK			PSB_MASK(25, 24)
+#define SB_N_CB_TUNE_SHIFT			24
+
+#define _SB_REF_A		0x8018
+#define _SB_REF_B		0x8038
+#define SB_REF_SFR(pipe)	_PIPE(pipe, _SB_REF_A, _SB_REF_B)
+
+#define _SB_P_A			0x801c
+#define _SB_P_B			0x803c
+#define SB_P(pipe) _PIPE(pipe, _SB_P_A, _SB_P_B)
+#define SB_P2_DIVIDER_MASK			PSB_MASK(31, 30)
+#define SB_P2_DIVIDER_SHIFT			30
+#define SB_P2_10				0 /* HDMI, DP, DAC */
+#define SB_P2_5				1 /* DAC */
+#define SB_P2_14				2 /* LVDS single */
+#define SB_P2_7				3 /* LVDS double */
+#define SB_P1_DIVIDER_MASK			PSB_MASK(15, 12)
+#define SB_P1_DIVIDER_SHIFT			12
+
+#define PSB_LANE0		0x120
+#define PSB_LANE1		0x220
+#define PSB_LANE2		0x2320
+#define PSB_LANE3		0x2420
+
+#define LANE_PLL_MASK		(0x7 << 20)
+#define LANE_PLL_ENABLE		(0x3 << 20)
+
+
+#endif
diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
new file mode 100644
index 0000000..a4bad1a
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
@@ -0,0 +1,1293 @@
+/*
+ * Copyright (c) 2006-2007 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/i2c.h>
+#include <linux/delay.h>
+/* #include <drm/drm_crtc.h> */
+#include <drm/drmP.h>
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "psb_intel_sdvo_regs.h"
+
+struct psb_intel_sdvo_priv {
+	struct psb_intel_i2c_chan *i2c_bus;
+	int slaveaddr;
+	int output_device;
+
+	u16 active_outputs;
+
+	struct psb_intel_sdvo_caps caps;
+	int pixel_clock_min, pixel_clock_max;
+
+	int save_sdvo_mult;
+	u16 save_active_outputs;
+	struct psb_intel_sdvo_dtd save_input_dtd_1, save_input_dtd_2;
+	struct psb_intel_sdvo_dtd save_output_dtd[16];
+	u32 save_SDVOX;
+	u8 in_out_map[4];
+
+	u8 by_input_wiring;
+	u32 active_device;
+};
+
+/**
+ * Writes the SDVOB or SDVOC with the given value, but always writes both
+ * SDVOB and SDVOC to work around apparent hardware issues (according to
+ * comments in the BIOS).
+ */
+void psb_intel_sdvo_write_sdvox(struct psb_intel_output *psb_intel_output,
+				u32 val)
+{
+	struct drm_device *dev = psb_intel_output->base.dev;
+	struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
+	u32 bval = val, cval = val;
+	int i;
+
+	if (sdvo_priv->output_device == SDVOB)
+		cval = REG_READ(SDVOC);
+	else
+		bval = REG_READ(SDVOB);
+	/*
+	 * Write the registers twice for luck. Sometimes,
+	 * writing them only once doesn't appear to 'stick'.
+	 * The BIOS does this too. Yay, magic
+	 */
+	for (i = 0; i < 2; i++) {
+		REG_WRITE(SDVOB, bval);
+		REG_READ(SDVOB);
+		REG_WRITE(SDVOC, cval);
+		REG_READ(SDVOC);
+	}
+}
+
+static bool psb_intel_sdvo_read_byte(
+				struct psb_intel_output *psb_intel_output,
+				u8 addr, u8 *ch)
+{
+	struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
+	u8 out_buf[2];
+	u8 buf[2];
+	int ret;
+
+	struct i2c_msg msgs[] = {
+		{
+		 .addr = sdvo_priv->i2c_bus->slave_addr,
+		 .flags = 0,
+		 .len = 1,
+		 .buf = out_buf,
+		 },
+		{
+		 .addr = sdvo_priv->i2c_bus->slave_addr,
+		 .flags = I2C_M_RD,
+		 .len = 1,
+		 .buf = buf,
+		 }
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = 0;
+
+	ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2);
+	if (ret == 2) {
+		*ch = buf[0];
+		return true;
+	}
+
+	return false;
+}
+
+static bool psb_intel_sdvo_write_byte(
+			struct psb_intel_output *psb_intel_output,
+			int addr, u8 ch)
+{
+	u8 out_buf[2];
+	struct i2c_msg msgs[] = {
+		{
+		 .addr = psb_intel_output->i2c_bus->slave_addr,
+		 .flags = 0,
+		 .len = 2,
+		 .buf = out_buf,
+		 }
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = ch;
+
+	if (i2c_transfer(&psb_intel_output->i2c_bus->adapter, msgs, 1) == 1)
+		return true;
+	return false;
+}
+
+#define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd}
+/** Mapping of command numbers to names, for debug output */
+static const struct _sdvo_cmd_name {
+	u8 cmd;
+	char *name;
+} sdvo_cmd_names[] = {
+SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FIRMWARE_REV),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TRAINED_INPUTS),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_OUTPUTS),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_OUTPUTS),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_IN_OUT_MAP),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_IN_OUT_MAP),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ATTACHED_DISPLAYS),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HOT_PLUG_SUPPORT),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_HOT_PLUG),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_HOT_PLUG),
+	    SDVO_CMD_NAME_ENTRY
+	    (SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_INPUT),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_OUTPUT),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART1),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART2),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART2),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART1),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART2),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART1),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART2),
+	    SDVO_CMD_NAME_ENTRY
+	    (SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING),
+	    SDVO_CMD_NAME_ENTRY
+	    (SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1),
+	    SDVO_CMD_NAME_ENTRY
+	    (SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2),
+	    SDVO_CMD_NAME_ENTRY
+	    (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE),
+	    SDVO_CMD_NAME_ENTRY
+	    (SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE),
+	    SDVO_CMD_NAME_ENTRY
+	    (SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CLOCK_RATE_MULT),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CLOCK_RATE_MULT),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT),
+	    SDVO_CMD_NAME_ENTRY
+	    (SDVO_CMD_SET_TV_RESOLUTION_SUPPORT),
+	    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH),};
+
+#define SDVO_NAME(dev_priv) \
+		 ((dev_priv)->output_device == SDVOB ? "SDVOB" : "SDVOC")
+#define SDVO_PRIV(output)   ((struct psb_intel_sdvo_priv *) (output)->dev_priv)
+
+static void psb_intel_sdvo_write_cmd(struct psb_intel_output *psb_intel_output,
+				     u8 cmd,
+				     void *args,
+				     int args_len)
+{
+	struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
+	int i;
+
+	if (0) {
+		printk(KERN_DEBUG "%s: W: %02X ", SDVO_NAME(sdvo_priv), cmd);
+		for (i = 0; i < args_len; i++)
+			printk(KERN_CONT "%02X ", ((u8 *) args)[i]);
+		for (; i < 8; i++)
+			printk(KERN_CONT "   ");
+		for (i = 0;
+		     i <
+		     sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0]);
+		     i++) {
+			if (cmd == sdvo_cmd_names[i].cmd) {
+				printk(KERN_CONT
+					"(%s)", sdvo_cmd_names[i].name);
+				break;
+			}
+		}
+		if (i ==
+		    sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0]))
+			printk(KERN_CONT "(%02X)", cmd);
+		printk(KERN_CONT "\n");
+	}
+
+	for (i = 0; i < args_len; i++) {
+		psb_intel_sdvo_write_byte(psb_intel_output,
+					SDVO_I2C_ARG_0 - i,
+					((u8 *) args)[i]);
+	}
+
+	psb_intel_sdvo_write_byte(psb_intel_output, SDVO_I2C_OPCODE, cmd);
+}
+
+static const char *const cmd_status_names[] = {
+	"Power on",
+	"Success",
+	"Not supported",
+	"Invalid arg",
+	"Pending",
+	"Target not specified",
+	"Scaling not supported"
+};
+
+static u8 psb_intel_sdvo_read_response(
+				struct psb_intel_output *psb_intel_output,
+				void *response, int response_len)
+{
+	struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
+	int i;
+	u8 status;
+	u8 retry = 50;
+
+	while (retry--) {
+		/* Read the command response */
+		for (i = 0; i < response_len; i++) {
+			psb_intel_sdvo_read_byte(psb_intel_output,
+					     SDVO_I2C_RETURN_0 + i,
+					     &((u8 *) response)[i]);
+		}
+
+		/* read the return status */
+		psb_intel_sdvo_read_byte(psb_intel_output,
+					 SDVO_I2C_CMD_STATUS,
+					 &status);
+
+		if (0) {
+			pr_debug("%s: R: ", SDVO_NAME(sdvo_priv));
+			for (i = 0; i < response_len; i++)
+				printk(KERN_CONT "%02X ", ((u8 *) response)[i]);
+			for (; i < 8; i++)
+				printk("   ");
+			if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP)
+				printk(KERN_CONT "(%s)",
+					 cmd_status_names[status]);
+			else
+				printk(KERN_CONT "(??? %d)", status);
+			printk(KERN_CONT "\n");
+		}
+
+		if (status != SDVO_CMD_STATUS_PENDING)
+			return status;
+
+		mdelay(50);
+	}
+
+	return status;
+}
+
+int psb_intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode)
+{
+	if (mode->clock >= 100000)
+		return 1;
+	else if (mode->clock >= 50000)
+		return 2;
+	else
+		return 4;
+}
+
+/**
+ * Don't check status code from this as it switches the bus back to the
+ * SDVO chips which defeats the purpose of doing a bus switch in the first
+ * place.
+ */
+void psb_intel_sdvo_set_control_bus_switch(
+				struct psb_intel_output *psb_intel_output,
+				u8 target)
+{
+	psb_intel_sdvo_write_cmd(psb_intel_output,
+				 SDVO_CMD_SET_CONTROL_BUS_SWITCH,
+				 &target,
+				 1);
+}
+
+static bool psb_intel_sdvo_set_target_input(
+				struct psb_intel_output *psb_intel_output,
+				bool target_0, bool target_1)
+{
+	struct psb_intel_sdvo_set_target_input_args targets = { 0 };
+	u8 status;
+
+	if (target_0 && target_1)
+		return SDVO_CMD_STATUS_NOTSUPP;
+
+	if (target_1)
+		targets.target_1 = 1;
+
+	psb_intel_sdvo_write_cmd(psb_intel_output, SDVO_CMD_SET_TARGET_INPUT,
+			     &targets, sizeof(targets));
+
+	status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0);
+
+	return status == SDVO_CMD_STATUS_SUCCESS;
+}
+
+/**
+ * Return whether each input is trained.
+ *
+ * This function is making an assumption about the layout of the response,
+ * which should be checked against the docs.
+ */
+static bool psb_intel_sdvo_get_trained_inputs(struct psb_intel_output
+					  *psb_intel_output, bool *input_1,
+					  bool *input_2)
+{
+	struct psb_intel_sdvo_get_trained_inputs_response response;
+	u8 status;
+
+	psb_intel_sdvo_write_cmd(psb_intel_output, SDVO_CMD_GET_TRAINED_INPUTS,
+			     NULL, 0);
+	status =
+	    psb_intel_sdvo_read_response(psb_intel_output, &response,
+				     sizeof(response));
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+
+	*input_1 = response.input0_trained;
+	*input_2 = response.input1_trained;
+	return true;
+}
+
+static bool psb_intel_sdvo_get_active_outputs(struct psb_intel_output
+					  *psb_intel_output, u16 *outputs)
+{
+	u8 status;
+
+	psb_intel_sdvo_write_cmd(psb_intel_output, SDVO_CMD_GET_ACTIVE_OUTPUTS,
+			     NULL, 0);
+	status =
+	    psb_intel_sdvo_read_response(psb_intel_output, outputs,
+				     sizeof(*outputs));
+
+	return status == SDVO_CMD_STATUS_SUCCESS;
+}
+
+static bool psb_intel_sdvo_set_active_outputs(struct psb_intel_output
+					  *psb_intel_output, u16 outputs)
+{
+	u8 status;
+
+	psb_intel_sdvo_write_cmd(psb_intel_output, SDVO_CMD_SET_ACTIVE_OUTPUTS,
+			     &outputs, sizeof(outputs));
+	status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0);
+	return status == SDVO_CMD_STATUS_SUCCESS;
+}
+
+static bool psb_intel_sdvo_set_encoder_power_state(struct psb_intel_output
+					       *psb_intel_output, int mode)
+{
+	u8 status, state = SDVO_ENCODER_STATE_ON;
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		state = SDVO_ENCODER_STATE_ON;
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+		state = SDVO_ENCODER_STATE_STANDBY;
+		break;
+	case DRM_MODE_DPMS_SUSPEND:
+		state = SDVO_ENCODER_STATE_SUSPEND;
+		break;
+	case DRM_MODE_DPMS_OFF:
+		state = SDVO_ENCODER_STATE_OFF;
+		break;
+	}
+
+	psb_intel_sdvo_write_cmd(psb_intel_output,
+			     SDVO_CMD_SET_ENCODER_POWER_STATE, &state,
+			     sizeof(state));
+	status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0);
+
+	return status == SDVO_CMD_STATUS_SUCCESS;
+}
+
+static bool psb_intel_sdvo_get_input_pixel_clock_range(struct psb_intel_output
+						   *psb_intel_output,
+						   int *clock_min,
+						   int *clock_max)
+{
+	struct psb_intel_sdvo_pixel_clock_range clocks;
+	u8 status;
+
+	psb_intel_sdvo_write_cmd(psb_intel_output,
+			     SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE, NULL,
+			     0);
+
+	status =
+	    psb_intel_sdvo_read_response(psb_intel_output, &clocks,
+				     sizeof(clocks));
+
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+
+	/* Convert the values from units of 10 kHz to kHz. */
+	*clock_min = clocks.min * 10;
+	*clock_max = clocks.max * 10;
+
+	return true;
+}
+
+static bool psb_intel_sdvo_set_target_output(
+				struct psb_intel_output *psb_intel_output,
+				u16 outputs)
+{
+	u8 status;
+
+	psb_intel_sdvo_write_cmd(psb_intel_output, SDVO_CMD_SET_TARGET_OUTPUT,
+			     &outputs, sizeof(outputs));
+
+	status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0);
+	return status == SDVO_CMD_STATUS_SUCCESS;
+}
+
+static bool psb_intel_sdvo_get_timing(struct psb_intel_output *psb_intel_output,
+				  u8 cmd, struct psb_intel_sdvo_dtd *dtd)
+{
+	u8 status;
+
+	psb_intel_sdvo_write_cmd(psb_intel_output, cmd, NULL, 0);
+	status = psb_intel_sdvo_read_response(psb_intel_output, &dtd->part1,
+					  sizeof(dtd->part1));
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+
+	psb_intel_sdvo_write_cmd(psb_intel_output, cmd + 1, NULL, 0);
+	status = psb_intel_sdvo_read_response(psb_intel_output, &dtd->part2,
+					  sizeof(dtd->part2));
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+
+	return true;
+}
+
+static bool psb_intel_sdvo_get_input_timing(
+				struct psb_intel_output *psb_intel_output,
+				struct psb_intel_sdvo_dtd *dtd)
+{
+	return psb_intel_sdvo_get_timing(psb_intel_output,
+				     SDVO_CMD_GET_INPUT_TIMINGS_PART1,
+				     dtd);
+}
+
+static bool psb_intel_sdvo_set_timing(
+				struct psb_intel_output *psb_intel_output,
+				u8 cmd,
+				struct psb_intel_sdvo_dtd *dtd)
+{
+	u8 status;
+
+	psb_intel_sdvo_write_cmd(psb_intel_output, cmd, &dtd->part1,
+			     sizeof(dtd->part1));
+	status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0);
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+
+	psb_intel_sdvo_write_cmd(psb_intel_output, cmd + 1, &dtd->part2,
+			     sizeof(dtd->part2));
+	status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0);
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+
+	return true;
+}
+
+static bool psb_intel_sdvo_set_input_timing(
+				struct psb_intel_output *psb_intel_output,
+				struct psb_intel_sdvo_dtd *dtd)
+{
+	return psb_intel_sdvo_set_timing(psb_intel_output,
+				     SDVO_CMD_SET_INPUT_TIMINGS_PART1,
+				     dtd);
+}
+
+static bool psb_intel_sdvo_set_output_timing(
+				struct psb_intel_output *psb_intel_output,
+				struct psb_intel_sdvo_dtd *dtd)
+{
+	return psb_intel_sdvo_set_timing(psb_intel_output,
+				     SDVO_CMD_SET_OUTPUT_TIMINGS_PART1,
+				     dtd);
+}
+
+static int psb_intel_sdvo_get_clock_rate_mult(struct psb_intel_output
+						*psb_intel_output)
+{
+	u8 response, status;
+
+	psb_intel_sdvo_write_cmd(psb_intel_output,
+				 SDVO_CMD_GET_CLOCK_RATE_MULT,
+				 NULL,
+				 0);
+
+	status = psb_intel_sdvo_read_response(psb_intel_output, &response, 1);
+
+	if (status != SDVO_CMD_STATUS_SUCCESS) {
+		DRM_DEBUG("Couldn't get SDVO clock rate multiplier\n");
+		return SDVO_CLOCK_RATE_MULT_1X;
+	} else {
+		DRM_DEBUG("Current clock rate multiplier: %d\n", response);
+	}
+
+	return response;
+}
+
+static bool psb_intel_sdvo_set_clock_rate_mult(struct psb_intel_output
+						*psb_intel_output, u8 val)
+{
+	u8 status;
+
+	psb_intel_sdvo_write_cmd(psb_intel_output,
+				SDVO_CMD_SET_CLOCK_RATE_MULT,
+				&val,
+				1);
+
+	status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0);
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+
+	return true;
+}
+
+static bool psb_sdvo_set_current_inoutmap(struct psb_intel_output *output,
+					  u32 in0outputmask,
+					  u32 in1outputmask)
+{
+	u8 byArgs[4];
+	u8 status;
+	int i;
+	struct psb_intel_sdvo_priv *sdvo_priv = output->dev_priv;
+
+	/* Make all fields of the  args/ret to zero */
+	memset(byArgs, 0, sizeof(byArgs));
+
+	/* Fill up the argument values; */
+	byArgs[0] = (u8) (in0outputmask & 0xFF);
+	byArgs[1] = (u8) ((in0outputmask >> 8) & 0xFF);
+	byArgs[2] = (u8) (in1outputmask & 0xFF);
+	byArgs[3] = (u8) ((in1outputmask >> 8) & 0xFF);
+
+
+	/*save inoutmap arg here*/
+	for (i = 0; i < 4; i++)
+		sdvo_priv->in_out_map[i] = byArgs[0];
+
+	psb_intel_sdvo_write_cmd(output, SDVO_CMD_SET_IN_OUT_MAP, byArgs, 4);
+	status = psb_intel_sdvo_read_response(output, NULL, 0);
+
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+	return true;
+}
+
+
+static void psb_intel_sdvo_set_iomap(struct psb_intel_output *output)
+{
+	u32 dwCurrentSDVOIn0 = 0;
+	u32 dwCurrentSDVOIn1 = 0;
+	u32 dwDevMask = 0;
+
+
+	struct psb_intel_sdvo_priv *sdvo_priv = output->dev_priv;
+
+	/* Please DO NOT change the following code. */
+	/* SDVOB_IN0 or SDVOB_IN1 ==> sdvo_in0 */
+	/* SDVOC_IN0 or SDVOC_IN1 ==> sdvo_in1 */
+	if (sdvo_priv->by_input_wiring & (SDVOB_IN0 | SDVOC_IN0)) {
+		switch (sdvo_priv->active_device) {
+		case SDVO_DEVICE_LVDS:
+			dwDevMask = SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1;
+			break;
+		case SDVO_DEVICE_TMDS:
+			dwDevMask = SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1;
+			break;
+		case SDVO_DEVICE_TV:
+			dwDevMask =
+			SDVO_OUTPUT_YPRPB0 | SDVO_OUTPUT_SVID0 |
+			SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_YPRPB1 |
+			SDVO_OUTPUT_SVID1 | SDVO_OUTPUT_CVBS1 |
+			SDVO_OUTPUT_SCART0 | SDVO_OUTPUT_SCART1;
+			break;
+		case SDVO_DEVICE_CRT:
+			dwDevMask = SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1;
+			break;
+		}
+		dwCurrentSDVOIn0 = (sdvo_priv->active_outputs & dwDevMask);
+	} else if (sdvo_priv->by_input_wiring & (SDVOB_IN1 | SDVOC_IN1)) {
+		switch (sdvo_priv->active_device) {
+		case SDVO_DEVICE_LVDS:
+			dwDevMask = SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1;
+			break;
+		case SDVO_DEVICE_TMDS:
+			dwDevMask = SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1;
+			break;
+		case SDVO_DEVICE_TV:
+			dwDevMask =
+			SDVO_OUTPUT_YPRPB0 | SDVO_OUTPUT_SVID0 |
+			SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_YPRPB1 |
+			SDVO_OUTPUT_SVID1 | SDVO_OUTPUT_CVBS1 |
+			SDVO_OUTPUT_SCART0 | SDVO_OUTPUT_SCART1;
+			break;
+		case SDVO_DEVICE_CRT:
+			dwDevMask = SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1;
+			break;
+		}
+		dwCurrentSDVOIn1 = (sdvo_priv->active_outputs & dwDevMask);
+	}
+
+	psb_sdvo_set_current_inoutmap(output, dwCurrentSDVOIn0,
+					  dwCurrentSDVOIn1);
+}
+
+
+static bool psb_intel_sdvo_mode_fixup(struct drm_encoder *encoder,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	/* Make the CRTC code factor in the SDVO pixel multiplier.  The SDVO
+	 * device will be told of the multiplier during mode_set.
+	 */
+	adjusted_mode->clock *= psb_intel_sdvo_get_pixel_multiplier(mode);
+	return true;
+}
+
+static void psb_intel_sdvo_mode_set(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	struct psb_intel_output *psb_intel_output =
+					enc_to_psb_intel_output(encoder);
+	struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
+	u16 width, height;
+	u16 h_blank_len, h_sync_len, v_blank_len, v_sync_len;
+	u16 h_sync_offset, v_sync_offset;
+	u32 sdvox;
+	struct psb_intel_sdvo_dtd output_dtd;
+	int sdvo_pixel_multiply;
+
+	if (!mode)
+		return;
+
+	psb_intel_sdvo_set_target_output(psb_intel_output, 0);
+
+	width = mode->crtc_hdisplay;
+	height = mode->crtc_vdisplay;
+
+	/* do some mode translations */
+	h_blank_len = mode->crtc_hblank_end - mode->crtc_hblank_start;
+	h_sync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
+
+	v_blank_len = mode->crtc_vblank_end - mode->crtc_vblank_start;
+	v_sync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
+
+	h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start;
+	v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start;
+
+	output_dtd.part1.clock = mode->clock / 10;
+	output_dtd.part1.h_active = width & 0xff;
+	output_dtd.part1.h_blank = h_blank_len & 0xff;
+	output_dtd.part1.h_high = (((width >> 8) & 0xf) << 4) |
+	    ((h_blank_len >> 8) & 0xf);
+	output_dtd.part1.v_active = height & 0xff;
+	output_dtd.part1.v_blank = v_blank_len & 0xff;
+	output_dtd.part1.v_high = (((height >> 8) & 0xf) << 4) |
+	    ((v_blank_len >> 8) & 0xf);
+
+	output_dtd.part2.h_sync_off = h_sync_offset;
+	output_dtd.part2.h_sync_width = h_sync_len & 0xff;
+	output_dtd.part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 |
+	    (v_sync_len & 0xf);
+	output_dtd.part2.sync_off_width_high =
+	    ((h_sync_offset & 0x300) >> 2) | ((h_sync_len & 0x300) >> 4) |
+	    ((v_sync_offset & 0x30) >> 2) | ((v_sync_len & 0x30) >> 4);
+
+	output_dtd.part2.dtd_flags = 0x18;
+	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+		output_dtd.part2.dtd_flags |= 0x2;
+	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+		output_dtd.part2.dtd_flags |= 0x4;
+
+	output_dtd.part2.sdvo_flags = 0;
+	output_dtd.part2.v_sync_off_high = v_sync_offset & 0xc0;
+	output_dtd.part2.reserved = 0;
+
+	/* Set the output timing to the screen */
+	psb_intel_sdvo_set_target_output(psb_intel_output,
+				     sdvo_priv->active_outputs);
+
+	/* Set the input timing to the screen. Assume always input 0. */
+	psb_intel_sdvo_set_target_input(psb_intel_output, true, false);
+
+	psb_intel_sdvo_set_output_timing(psb_intel_output, &output_dtd);
+
+	/* We would like to use i830_sdvo_create_preferred_input_timing() to
+	 * provide the device with a timing it can support, if it supports that
+	 * feature.  However, presumably we would need to adjust the CRTC to
+	 * output the preferred timing, and we don't support that currently.
+	 */
+	psb_intel_sdvo_set_input_timing(psb_intel_output, &output_dtd);
+
+	switch (psb_intel_sdvo_get_pixel_multiplier(mode)) {
+	case 1:
+		psb_intel_sdvo_set_clock_rate_mult(psb_intel_output,
+					       SDVO_CLOCK_RATE_MULT_1X);
+		break;
+	case 2:
+		psb_intel_sdvo_set_clock_rate_mult(psb_intel_output,
+					       SDVO_CLOCK_RATE_MULT_2X);
+		break;
+	case 4:
+		psb_intel_sdvo_set_clock_rate_mult(psb_intel_output,
+					       SDVO_CLOCK_RATE_MULT_4X);
+		break;
+	}
+
+	/* Set the SDVO control regs. */
+	sdvox = REG_READ(sdvo_priv->output_device);
+	switch (sdvo_priv->output_device) {
+	case SDVOB:
+		sdvox &= SDVOB_PRESERVE_MASK;
+		break;
+	case SDVOC:
+		sdvox &= SDVOC_PRESERVE_MASK;
+		break;
+	}
+	sdvox |= (9 << 19) | SDVO_BORDER_ENABLE;
+	if (psb_intel_crtc->pipe == 1)
+		sdvox |= SDVO_PIPE_B_SELECT;
+
+	sdvo_pixel_multiply = psb_intel_sdvo_get_pixel_multiplier(mode);
+
+	psb_intel_sdvo_write_sdvox(psb_intel_output, sdvox);
+
+	 psb_intel_sdvo_set_iomap(psb_intel_output);
+}
+
+static void psb_intel_sdvo_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *psb_intel_output =
+					enc_to_psb_intel_output(encoder);
+	struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
+	u32 temp;
+
+	if (mode != DRM_MODE_DPMS_ON) {
+		psb_intel_sdvo_set_active_outputs(psb_intel_output, 0);
+		if (0)
+			psb_intel_sdvo_set_encoder_power_state(
+							psb_intel_output,
+							mode);
+
+		if (mode == DRM_MODE_DPMS_OFF) {
+			temp = REG_READ(sdvo_priv->output_device);
+			if ((temp & SDVO_ENABLE) != 0) {
+				psb_intel_sdvo_write_sdvox(psb_intel_output,
+						       temp &
+						       ~SDVO_ENABLE);
+			}
+		}
+	} else {
+		bool input1, input2;
+		int i;
+		u8 status;
+
+		temp = REG_READ(sdvo_priv->output_device);
+		if ((temp & SDVO_ENABLE) == 0)
+			psb_intel_sdvo_write_sdvox(psb_intel_output,
+					       temp | SDVO_ENABLE);
+		for (i = 0; i < 2; i++)
+			psb_intel_wait_for_vblank(dev);
+
+		status =
+		    psb_intel_sdvo_get_trained_inputs(psb_intel_output,
+							&input1,
+							&input2);
+
+
+		/* Warn if the device reported failure to sync.
+		 * A lot of SDVO devices fail to notify of sync, but it's
+		 * a given it the status is a success, we succeeded.
+		 */
+		if (status == SDVO_CMD_STATUS_SUCCESS && !input1) {
+			DRM_DEBUG
+			    ("First %s output reported failure to sync\n",
+			     SDVO_NAME(sdvo_priv));
+		}
+
+		if (0)
+			psb_intel_sdvo_set_encoder_power_state(
+							psb_intel_output,
+							mode);
+		psb_intel_sdvo_set_active_outputs(psb_intel_output,
+					      sdvo_priv->active_outputs);
+	}
+	return;
+}
+
+static void psb_intel_sdvo_save(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+	struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
+	/*int o;*/
+
+	sdvo_priv->save_sdvo_mult =
+	    psb_intel_sdvo_get_clock_rate_mult(psb_intel_output);
+	psb_intel_sdvo_get_active_outputs(psb_intel_output,
+				      &sdvo_priv->save_active_outputs);
+
+	if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) {
+		psb_intel_sdvo_set_target_input(psb_intel_output,
+						true,
+						false);
+		psb_intel_sdvo_get_input_timing(psb_intel_output,
+					    &sdvo_priv->save_input_dtd_1);
+	}
+
+	if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) {
+		psb_intel_sdvo_set_target_input(psb_intel_output,
+						false,
+						true);
+		psb_intel_sdvo_get_input_timing(psb_intel_output,
+					    &sdvo_priv->save_input_dtd_2);
+	}
+	sdvo_priv->save_SDVOX = REG_READ(sdvo_priv->output_device);
+
+	/*TODO: save the in_out_map state*/
+}
+
+static void psb_intel_sdvo_restore(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+	struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
+	/*int o;*/
+	int i;
+	bool input1, input2;
+	u8 status;
+
+	psb_intel_sdvo_set_active_outputs(psb_intel_output, 0);
+
+	if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) {
+		psb_intel_sdvo_set_target_input(psb_intel_output, true, false);
+		psb_intel_sdvo_set_input_timing(psb_intel_output,
+					    &sdvo_priv->save_input_dtd_1);
+	}
+
+	if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) {
+		psb_intel_sdvo_set_target_input(psb_intel_output, false, true);
+		psb_intel_sdvo_set_input_timing(psb_intel_output,
+					    &sdvo_priv->save_input_dtd_2);
+	}
+
+	psb_intel_sdvo_set_clock_rate_mult(psb_intel_output,
+				       sdvo_priv->save_sdvo_mult);
+
+	REG_WRITE(sdvo_priv->output_device, sdvo_priv->save_SDVOX);
+
+	if (sdvo_priv->save_SDVOX & SDVO_ENABLE) {
+		for (i = 0; i < 2; i++)
+			psb_intel_wait_for_vblank(dev);
+		status =
+		    psb_intel_sdvo_get_trained_inputs(psb_intel_output,
+							&input1,
+							&input2);
+		if (status == SDVO_CMD_STATUS_SUCCESS && !input1)
+			DRM_DEBUG
+			    ("First %s output reported failure to sync\n",
+			     SDVO_NAME(sdvo_priv));
+	}
+
+	psb_intel_sdvo_set_active_outputs(psb_intel_output,
+				      sdvo_priv->save_active_outputs);
+
+	/*TODO: restore in_out_map*/
+	psb_intel_sdvo_write_cmd(psb_intel_output,
+				 SDVO_CMD_SET_IN_OUT_MAP,
+				 sdvo_priv->in_out_map,
+				 4);
+
+	psb_intel_sdvo_read_response(psb_intel_output, NULL, 0);
+}
+
+static int psb_intel_sdvo_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+	struct psb_intel_output *psb_intel_output =
+				to_psb_intel_output(connector);
+	struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
+
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	if (sdvo_priv->pixel_clock_min > mode->clock)
+		return MODE_CLOCK_LOW;
+
+	if (sdvo_priv->pixel_clock_max < mode->clock)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static bool psb_intel_sdvo_get_capabilities(
+				struct psb_intel_output *psb_intel_output,
+				struct psb_intel_sdvo_caps *caps)
+{
+	u8 status;
+
+	psb_intel_sdvo_write_cmd(psb_intel_output,
+				 SDVO_CMD_GET_DEVICE_CAPS,
+				 NULL,
+				 0);
+	status = psb_intel_sdvo_read_response(psb_intel_output,
+						caps,
+						sizeof(*caps));
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+
+	return true;
+}
+
+struct drm_connector *psb_intel_sdvo_find(struct drm_device *dev, int sdvoB)
+{
+	struct drm_connector *connector = NULL;
+	struct psb_intel_output *iout = NULL;
+	struct psb_intel_sdvo_priv *sdvo;
+
+	/* find the sdvo connector */
+	list_for_each_entry(connector, &dev->mode_config.connector_list,
+			    head) {
+		iout = to_psb_intel_output(connector);
+
+		if (iout->type != INTEL_OUTPUT_SDVO)
+			continue;
+
+		sdvo = iout->dev_priv;
+
+		if (sdvo->output_device == SDVOB && sdvoB)
+			return connector;
+
+		if (sdvo->output_device == SDVOC && !sdvoB)
+			return connector;
+
+	}
+
+	return NULL;
+}
+
+int psb_intel_sdvo_supports_hotplug(struct drm_connector *connector)
+{
+	u8 response[2];
+	u8 status;
+	struct psb_intel_output *psb_intel_output;
+
+	if (!connector)
+		return 0;
+
+	psb_intel_output = to_psb_intel_output(connector);
+
+	psb_intel_sdvo_write_cmd(psb_intel_output,
+				 SDVO_CMD_GET_HOT_PLUG_SUPPORT,
+				 NULL,
+				 0);
+	status = psb_intel_sdvo_read_response(psb_intel_output,
+						&response,
+						2);
+
+	if (response[0] != 0)
+		return 1;
+
+	return 0;
+}
+
+void psb_intel_sdvo_set_hotplug(struct drm_connector *connector, int on)
+{
+	u8 response[2];
+	u8 status;
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+
+	psb_intel_sdvo_write_cmd(psb_intel_output,
+				 SDVO_CMD_GET_ACTIVE_HOT_PLUG,
+				 NULL,
+				 0);
+	psb_intel_sdvo_read_response(psb_intel_output, &response, 2);
+
+	if (on) {
+		psb_intel_sdvo_write_cmd(psb_intel_output,
+				     SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL,
+				     0);
+		status = psb_intel_sdvo_read_response(psb_intel_output,
+						      &response,
+						      2);
+
+		psb_intel_sdvo_write_cmd(psb_intel_output,
+				     SDVO_CMD_SET_ACTIVE_HOT_PLUG,
+				     &response, 2);
+	} else {
+		response[0] = 0;
+		response[1] = 0;
+		psb_intel_sdvo_write_cmd(psb_intel_output,
+				     SDVO_CMD_SET_ACTIVE_HOT_PLUG,
+				     &response, 2);
+	}
+
+	psb_intel_sdvo_write_cmd(psb_intel_output,
+				 SDVO_CMD_GET_ACTIVE_HOT_PLUG,
+				 NULL,
+				 0);
+	psb_intel_sdvo_read_response(psb_intel_output, &response, 2);
+}
+
+static enum drm_connector_status psb_intel_sdvo_detect(struct drm_connector
+						   *connector, bool force)
+{
+	u8 response[2];
+	u8 status;
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+
+	psb_intel_sdvo_write_cmd(psb_intel_output,
+				 SDVO_CMD_GET_ATTACHED_DISPLAYS,
+				 NULL,
+				 0);
+	status = psb_intel_sdvo_read_response(psb_intel_output, &response, 2);
+
+	DRM_DEBUG("SDVO response %d %d\n", response[0], response[1]);
+	if ((response[0] != 0) || (response[1] != 0))
+		return connector_status_connected;
+	else
+		return connector_status_disconnected;
+}
+
+static int psb_intel_sdvo_get_modes(struct drm_connector *connector)
+{
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+
+	/* set the bus switch and get the modes */
+	psb_intel_sdvo_set_control_bus_switch(psb_intel_output,
+					  SDVO_CONTROL_BUS_DDC2);
+	psb_intel_ddc_get_modes(psb_intel_output);
+
+	if (list_empty(&connector->probed_modes))
+		return 0;
+	return 1;
+}
+
+static void psb_intel_sdvo_destroy(struct drm_connector *connector)
+{
+	struct psb_intel_output *psb_intel_output =
+				to_psb_intel_output(connector);
+
+	if (psb_intel_output->i2c_bus)
+		psb_intel_i2c_destroy(psb_intel_output->i2c_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(psb_intel_output);
+}
+
+static const struct drm_encoder_helper_funcs psb_intel_sdvo_helper_funcs = {
+	.dpms = psb_intel_sdvo_dpms,
+	.mode_fixup = psb_intel_sdvo_mode_fixup,
+	.prepare = psb_intel_encoder_prepare,
+	.mode_set = psb_intel_sdvo_mode_set,
+	.commit = psb_intel_encoder_commit,
+};
+
+static const struct drm_connector_funcs psb_intel_sdvo_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.save = psb_intel_sdvo_save,
+	.restore = psb_intel_sdvo_restore,
+	.detect = psb_intel_sdvo_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = psb_intel_sdvo_destroy,
+};
+
+static const struct drm_connector_helper_funcs
+				psb_intel_sdvo_connector_helper_funcs = {
+	.get_modes = psb_intel_sdvo_get_modes,
+	.mode_valid = psb_intel_sdvo_mode_valid,
+	.best_encoder = psb_intel_best_encoder,
+};
+
+void psb_intel_sdvo_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs psb_intel_sdvo_enc_funcs = {
+	.destroy = psb_intel_sdvo_enc_destroy,
+};
+
+
+void psb_intel_sdvo_init(struct drm_device *dev, int output_device)
+{
+	struct drm_connector *connector;
+	struct psb_intel_output *psb_intel_output;
+	struct psb_intel_sdvo_priv *sdvo_priv;
+	struct psb_intel_i2c_chan *i2cbus = NULL;
+	int connector_type;
+	u8 ch[0x40];
+	int i;
+	int encoder_type, output_id;
+
+	psb_intel_output =
+	    kcalloc(sizeof(struct psb_intel_output) +
+		    sizeof(struct psb_intel_sdvo_priv), 1, GFP_KERNEL);
+	if (!psb_intel_output)
+		return;
+
+	connector = &psb_intel_output->base;
+
+	drm_connector_init(dev, connector, &psb_intel_sdvo_connector_funcs,
+			   DRM_MODE_CONNECTOR_Unknown);
+	drm_connector_helper_add(connector,
+				 &psb_intel_sdvo_connector_helper_funcs);
+	sdvo_priv = (struct psb_intel_sdvo_priv *) (psb_intel_output + 1);
+	psb_intel_output->type = INTEL_OUTPUT_SDVO;
+
+	connector->interlace_allowed = 0;
+	connector->doublescan_allowed = 0;
+
+	/* setup the DDC bus. */
+	if (output_device == SDVOB)
+		i2cbus =
+		    psb_intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
+	else
+		i2cbus =
+		    psb_intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
+
+	if (!i2cbus)
+		goto err_connector;
+
+	sdvo_priv->i2c_bus = i2cbus;
+
+	if (output_device == SDVOB) {
+		output_id = 1;
+		sdvo_priv->by_input_wiring = SDVOB_IN0;
+		sdvo_priv->i2c_bus->slave_addr = 0x38;
+	} else {
+		output_id = 2;
+		sdvo_priv->i2c_bus->slave_addr = 0x39;
+	}
+
+	sdvo_priv->output_device = output_device;
+	psb_intel_output->i2c_bus = i2cbus;
+	psb_intel_output->dev_priv = sdvo_priv;
+
+
+	/* Read the regs to test if we can talk to the device */
+	for (i = 0; i < 0x40; i++) {
+		if (!psb_intel_sdvo_read_byte(psb_intel_output, i, &ch[i])) {
+			dev_dbg(dev->dev, "No SDVO device found on SDVO%c\n",
+				  output_device == SDVOB ? 'B' : 'C');
+			goto err_i2c;
+		}
+	}
+
+	psb_intel_sdvo_get_capabilities(psb_intel_output, &sdvo_priv->caps);
+
+	memset(&sdvo_priv->active_outputs, 0,
+	       sizeof(sdvo_priv->active_outputs));
+
+	/* TODO, CVBS, SVID, YPRPB & SCART outputs. */
+	if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0) {
+		sdvo_priv->active_outputs = SDVO_OUTPUT_RGB0;
+		sdvo_priv->active_device = SDVO_DEVICE_CRT;
+		connector->display_info.subpixel_order =
+		    SubPixelHorizontalRGB;
+		encoder_type = DRM_MODE_ENCODER_DAC;
+		connector_type = DRM_MODE_CONNECTOR_VGA;
+	} else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1) {
+		sdvo_priv->active_outputs = SDVO_OUTPUT_RGB1;
+		sdvo_priv->active_outputs = SDVO_DEVICE_CRT;
+		connector->display_info.subpixel_order =
+		    SubPixelHorizontalRGB;
+		encoder_type = DRM_MODE_ENCODER_DAC;
+		connector_type = DRM_MODE_CONNECTOR_VGA;
+	} else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0) {
+		sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS0;
+		sdvo_priv->active_device = SDVO_DEVICE_TMDS;
+		connector->display_info.subpixel_order =
+		    SubPixelHorizontalRGB;
+		encoder_type = DRM_MODE_ENCODER_TMDS;
+		connector_type = DRM_MODE_CONNECTOR_DVID;
+	} else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS1) {
+		sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS1;
+		sdvo_priv->active_device = SDVO_DEVICE_TMDS;
+		connector->display_info.subpixel_order =
+		    SubPixelHorizontalRGB;
+		encoder_type = DRM_MODE_ENCODER_TMDS;
+		connector_type = DRM_MODE_CONNECTOR_DVID;
+	} else {
+		unsigned char bytes[2];
+
+		memcpy(bytes, &sdvo_priv->caps.output_flags, 2);
+		dev_dbg(dev->dev, "%s: No active RGB or TMDS outputs (0x%02x%02x)\n",
+		     SDVO_NAME(sdvo_priv), bytes[0], bytes[1]);
+		goto err_i2c;
+	}
+
+	drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_sdvo_enc_funcs,
+			 encoder_type);
+	drm_encoder_helper_add(&psb_intel_output->enc,
+			       &psb_intel_sdvo_helper_funcs);
+	connector->connector_type = connector_type;
+
+	drm_mode_connector_attach_encoder(&psb_intel_output->base,
+					  &psb_intel_output->enc);
+	drm_sysfs_connector_add(connector);
+
+	/* Set the input timing to the screen. Assume always input 0. */
+	psb_intel_sdvo_set_target_input(psb_intel_output, true, false);
+
+	psb_intel_sdvo_get_input_pixel_clock_range(psb_intel_output,
+					       &sdvo_priv->pixel_clock_min,
+					       &sdvo_priv->
+					       pixel_clock_max);
+
+
+	dev_dbg(dev->dev, "%s device VID/DID: %02X:%02X.%02X, "
+		  "clock range %dMHz - %dMHz, "
+		  "input 1: %c, input 2: %c, "
+		  "output 1: %c, output 2: %c\n",
+		  SDVO_NAME(sdvo_priv),
+		  sdvo_priv->caps.vendor_id, sdvo_priv->caps.device_id,
+		  sdvo_priv->caps.device_rev_id,
+		  sdvo_priv->pixel_clock_min / 1000,
+		  sdvo_priv->pixel_clock_max / 1000,
+		  (sdvo_priv->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N',
+		  (sdvo_priv->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N',
+		  /* check currently supported outputs */
+		  sdvo_priv->caps.output_flags &
+		  (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_RGB0) ? 'Y' : 'N',
+		  sdvo_priv->caps.output_flags &
+		  (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
+
+	psb_intel_output->ddc_bus = i2cbus;
+
+	return;
+
+err_i2c:
+	psb_intel_i2c_destroy(psb_intel_output->i2c_bus);
+err_connector:
+	drm_connector_cleanup(connector);
+	kfree(psb_intel_output);
+
+	return;
+}
diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo_regs.h b/drivers/gpu/drm/gma500/psb_intel_sdvo_regs.h
new file mode 100644
index 0000000..96862ea
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_intel_sdvo_regs.h
@@ -0,0 +1,338 @@
+/*
+ * SDVO command definitions and structures.
+ *
+ * Copyright (c) 2008, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#define SDVO_OUTPUT_FIRST   (0)
+#define SDVO_OUTPUT_TMDS0   (1 << 0)
+#define SDVO_OUTPUT_RGB0    (1 << 1)
+#define SDVO_OUTPUT_CVBS0   (1 << 2)
+#define SDVO_OUTPUT_SVID0   (1 << 3)
+#define SDVO_OUTPUT_YPRPB0  (1 << 4)
+#define SDVO_OUTPUT_SCART0  (1 << 5)
+#define SDVO_OUTPUT_LVDS0   (1 << 6)
+#define SDVO_OUTPUT_TMDS1   (1 << 8)
+#define SDVO_OUTPUT_RGB1    (1 << 9)
+#define SDVO_OUTPUT_CVBS1   (1 << 10)
+#define SDVO_OUTPUT_SVID1   (1 << 11)
+#define SDVO_OUTPUT_YPRPB1  (1 << 12)
+#define SDVO_OUTPUT_SCART1  (1 << 13)
+#define SDVO_OUTPUT_LVDS1   (1 << 14)
+#define SDVO_OUTPUT_LAST    (14)
+
+struct psb_intel_sdvo_caps {
+	u8 vendor_id;
+	u8 device_id;
+	u8 device_rev_id;
+	u8 sdvo_version_major;
+	u8 sdvo_version_minor;
+	unsigned int sdvo_inputs_mask:2;
+	unsigned int smooth_scaling:1;
+	unsigned int sharp_scaling:1;
+	unsigned int up_scaling:1;
+	unsigned int down_scaling:1;
+	unsigned int stall_support:1;
+	unsigned int pad:1;
+	u16 output_flags;
+} __packed;
+
+/** This matches the EDID DTD structure, more or less */
+struct psb_intel_sdvo_dtd {
+	struct {
+		u16 clock;	/**< pixel clock, in 10kHz units */
+		u8 h_active;	/**< lower 8 bits (pixels) */
+		u8 h_blank;	/**< lower 8 bits (pixels) */
+		u8 h_high;	/**< upper 4 bits each h_active, h_blank */
+		u8 v_active;	/**< lower 8 bits (lines) */
+		u8 v_blank;	/**< lower 8 bits (lines) */
+		u8 v_high;	/**< upper 4 bits each v_active, v_blank */
+	} part1;
+
+	struct {
+		u8 h_sync_off;
+			/**< lower 8 bits, from hblank start */
+		u8 h_sync_width;/**< lower 8 bits (pixels) */
+	/** lower 4 bits each vsync offset, vsync width */
+		u8 v_sync_off_width;
+	/**
+	 * 2 high bits of hsync offset, 2 high bits of hsync width,
+	 * bits 4-5 of vsync offset, and 2 high bits of vsync width.
+	 */
+		u8 sync_off_width_high;
+		u8 dtd_flags;
+		u8 sdvo_flags;
+	/** bits 6-7 of vsync offset at bits 6-7 */
+		u8 v_sync_off_high;
+		u8 reserved;
+	} part2;
+} __packed;
+
+struct psb_intel_sdvo_pixel_clock_range {
+	u16 min;		/**< pixel clock, in 10kHz units */
+	u16 max;		/**< pixel clock, in 10kHz units */
+} __packed;
+
+struct psb_intel_sdvo_preferred_input_timing_args {
+	u16 clock;
+	u16 width;
+	u16 height;
+} __packed;
+
+/* I2C registers for SDVO */
+#define SDVO_I2C_ARG_0				0x07
+#define SDVO_I2C_ARG_1				0x06
+#define SDVO_I2C_ARG_2				0x05
+#define SDVO_I2C_ARG_3				0x04
+#define SDVO_I2C_ARG_4				0x03
+#define SDVO_I2C_ARG_5				0x02
+#define SDVO_I2C_ARG_6				0x01
+#define SDVO_I2C_ARG_7				0x00
+#define SDVO_I2C_OPCODE				0x08
+#define SDVO_I2C_CMD_STATUS			0x09
+#define SDVO_I2C_RETURN_0			0x0a
+#define SDVO_I2C_RETURN_1			0x0b
+#define SDVO_I2C_RETURN_2			0x0c
+#define SDVO_I2C_RETURN_3			0x0d
+#define SDVO_I2C_RETURN_4			0x0e
+#define SDVO_I2C_RETURN_5			0x0f
+#define SDVO_I2C_RETURN_6			0x10
+#define SDVO_I2C_RETURN_7			0x11
+#define SDVO_I2C_VENDOR_BEGIN			0x20
+
+/* Status results */
+#define SDVO_CMD_STATUS_POWER_ON		0x0
+#define SDVO_CMD_STATUS_SUCCESS			0x1
+#define SDVO_CMD_STATUS_NOTSUPP			0x2
+#define SDVO_CMD_STATUS_INVALID_ARG		0x3
+#define SDVO_CMD_STATUS_PENDING			0x4
+#define SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED	0x5
+#define SDVO_CMD_STATUS_SCALING_NOT_SUPP	0x6
+
+/* SDVO commands, argument/result registers */
+
+#define SDVO_CMD_RESET					0x01
+
+/** Returns a struct psb_intel_sdvo_caps */
+#define SDVO_CMD_GET_DEVICE_CAPS			0x02
+
+#define SDVO_CMD_GET_FIRMWARE_REV			0x86
+# define SDVO_DEVICE_FIRMWARE_MINOR			SDVO_I2C_RETURN_0
+# define SDVO_DEVICE_FIRMWARE_MAJOR			SDVO_I2C_RETURN_1
+# define SDVO_DEVICE_FIRMWARE_PATCH			SDVO_I2C_RETURN_2
+
+/**
+ * Reports which inputs are trained (managed to sync).
+ *
+ * Devices must have trained within 2 vsyncs of a mode change.
+ */
+#define SDVO_CMD_GET_TRAINED_INPUTS			0x03
+struct psb_intel_sdvo_get_trained_inputs_response {
+	unsigned int input0_trained:1;
+	unsigned int input1_trained:1;
+	unsigned int pad:6;
+} __packed;
+
+/** Returns a struct psb_intel_sdvo_output_flags of active outputs. */
+#define SDVO_CMD_GET_ACTIVE_OUTPUTS			0x04
+
+/**
+ * Sets the current set of active outputs.
+ *
+ * Takes a struct psb_intel_sdvo_output_flags.
+ * Must be preceded by a SET_IN_OUT_MAP
+ * on multi-output devices.
+ */
+#define SDVO_CMD_SET_ACTIVE_OUTPUTS			0x05
+
+/**
+ * Returns the current mapping of SDVO inputs to outputs on the device.
+ *
+ * Returns two struct psb_intel_sdvo_output_flags structures.
+ */
+#define SDVO_CMD_GET_IN_OUT_MAP				0x06
+
+/**
+ * Sets the current mapping of SDVO inputs to outputs on the device.
+ *
+ * Takes two struct i380_sdvo_output_flags structures.
+ */
+#define SDVO_CMD_SET_IN_OUT_MAP				0x07
+
+/**
+ * Returns a struct psb_intel_sdvo_output_flags of attached displays.
+ */
+#define SDVO_CMD_GET_ATTACHED_DISPLAYS			0x0b
+
+/**
+ * Returns a struct psb_intel_sdvo_ouptut_flags of displays supporting hot plugging.
+ */
+#define SDVO_CMD_GET_HOT_PLUG_SUPPORT			0x0c
+
+/**
+ * Takes a struct psb_intel_sdvo_output_flags.
+ */
+#define SDVO_CMD_SET_ACTIVE_HOT_PLUG			0x0d
+
+/**
+ * Returns a struct psb_intel_sdvo_output_flags of displays with hot plug
+ * interrupts enabled.
+ */
+#define SDVO_CMD_GET_ACTIVE_HOT_PLUG			0x0e
+
+#define SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE		0x0f
+struct psb_intel_sdvo_get_interrupt_event_source_response {
+	u16 interrupt_status;
+	unsigned int ambient_light_interrupt:1;
+	unsigned int pad:7;
+} __packed;
+
+/**
+ * Selects which input is affected by future input commands.
+ *
+ * Commands affected include SET_INPUT_TIMINGS_PART[12],
+ * GET_INPUT_TIMINGS_PART[12], GET_PREFERRED_INPUT_TIMINGS_PART[12],
+ * GET_INPUT_PIXEL_CLOCK_RANGE, and CREATE_PREFERRED_INPUT_TIMINGS.
+ */
+#define SDVO_CMD_SET_TARGET_INPUT			0x10
+struct psb_intel_sdvo_set_target_input_args {
+	unsigned int target_1:1;
+	unsigned int pad:7;
+} __packed;
+
+/**
+ * Takes a struct psb_intel_sdvo_output_flags of which outputs are targeted by
+ * future output commands.
+ *
+ * Affected commands inclue SET_OUTPUT_TIMINGS_PART[12],
+ * GET_OUTPUT_TIMINGS_PART[12], and GET_OUTPUT_PIXEL_CLOCK_RANGE.
+ */
+#define SDVO_CMD_SET_TARGET_OUTPUT			0x11
+
+#define SDVO_CMD_GET_INPUT_TIMINGS_PART1		0x12
+#define SDVO_CMD_GET_INPUT_TIMINGS_PART2		0x13
+#define SDVO_CMD_SET_INPUT_TIMINGS_PART1		0x14
+#define SDVO_CMD_SET_INPUT_TIMINGS_PART2		0x15
+#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART1		0x16
+#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART2		0x17
+#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART1		0x18
+#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART2		0x19
+/* Part 1 */
+# define SDVO_DTD_CLOCK_LOW				SDVO_I2C_ARG_0
+# define SDVO_DTD_CLOCK_HIGH				SDVO_I2C_ARG_1
+# define SDVO_DTD_H_ACTIVE				SDVO_I2C_ARG_2
+# define SDVO_DTD_H_BLANK				SDVO_I2C_ARG_3
+# define SDVO_DTD_H_HIGH				SDVO_I2C_ARG_4
+# define SDVO_DTD_V_ACTIVE				SDVO_I2C_ARG_5
+# define SDVO_DTD_V_BLANK				SDVO_I2C_ARG_6
+# define SDVO_DTD_V_HIGH				SDVO_I2C_ARG_7
+/* Part 2 */
+# define SDVO_DTD_HSYNC_OFF				SDVO_I2C_ARG_0
+# define SDVO_DTD_HSYNC_WIDTH				SDVO_I2C_ARG_1
+# define SDVO_DTD_VSYNC_OFF_WIDTH			SDVO_I2C_ARG_2
+# define SDVO_DTD_SYNC_OFF_WIDTH_HIGH			SDVO_I2C_ARG_3
+# define SDVO_DTD_DTD_FLAGS				SDVO_I2C_ARG_4
+# define SDVO_DTD_DTD_FLAG_INTERLACED				(1 << 7)
+# define SDVO_DTD_DTD_FLAG_STEREO_MASK				(3 << 5)
+# define SDVO_DTD_DTD_FLAG_INPUT_MASK				(3 << 3)
+# define SDVO_DTD_DTD_FLAG_SYNC_MASK				(3 << 1)
+# define SDVO_DTD_SDVO_FLAS				SDVO_I2C_ARG_5
+# define SDVO_DTD_SDVO_FLAG_STALL				(1 << 7)
+# define SDVO_DTD_SDVO_FLAG_CENTERED				(0 << 6)
+# define SDVO_DTD_SDVO_FLAG_UPPER_LEFT				(1 << 6)
+# define SDVO_DTD_SDVO_FLAG_SCALING_MASK			(3 << 4)
+# define SDVO_DTD_SDVO_FLAG_SCALING_NONE			(0 << 4)
+# define SDVO_DTD_SDVO_FLAG_SCALING_SHARP			(1 << 4)
+# define SDVO_DTD_SDVO_FLAG_SCALING_SMOOTH			(2 << 4)
+# define SDVO_DTD_VSYNC_OFF_HIGH			SDVO_I2C_ARG_6
+
+/**
+ * Generates a DTD based on the given width, height, and flags.
+ *
+ * This will be supported by any device supporting scaling or interlaced
+ * modes.
+ */
+#define SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING		0x1a
+# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_LOW		SDVO_I2C_ARG_0
+# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_HIGH		SDVO_I2C_ARG_1
+# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_LOW		SDVO_I2C_ARG_2
+# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_HIGH		SDVO_I2C_ARG_3
+# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_LOW		SDVO_I2C_ARG_4
+# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_HIGH	SDVO_I2C_ARG_5
+# define SDVO_PREFERRED_INPUT_TIMING_FLAGS		SDVO_I2C_ARG_6
+# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_INTERLACED		(1 << 0)
+# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_SCALED		(1 << 1)
+
+#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1	0x1b
+#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2	0x1c
+
+/** Returns a struct psb_intel_sdvo_pixel_clock_range */
+#define SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE		0x1d
+/** Returns a struct psb_intel_sdvo_pixel_clock_range */
+#define SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE		0x1e
+
+/** Returns a byte bitfield containing SDVO_CLOCK_RATE_MULT_* flags */
+#define SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS		0x1f
+
+/** Returns a byte containing a SDVO_CLOCK_RATE_MULT_* flag */
+#define SDVO_CMD_GET_CLOCK_RATE_MULT			0x20
+/** Takes a byte containing a SDVO_CLOCK_RATE_MULT_* flag */
+#define SDVO_CMD_SET_CLOCK_RATE_MULT			0x21
+# define SDVO_CLOCK_RATE_MULT_1X				(1 << 0)
+# define SDVO_CLOCK_RATE_MULT_2X				(1 << 1)
+# define SDVO_CLOCK_RATE_MULT_4X				(1 << 3)
+
+#define SDVO_CMD_GET_SUPPORTED_TV_FORMATS		0x27
+
+#define SDVO_CMD_GET_TV_FORMAT				0x28
+
+#define SDVO_CMD_SET_TV_FORMAT				0x29
+
+#define SDVO_CMD_GET_SUPPORTED_POWER_STATES		0x2a
+#define SDVO_CMD_GET_ENCODER_POWER_STATE		0x2b
+#define SDVO_CMD_SET_ENCODER_POWER_STATE		0x2c
+# define SDVO_ENCODER_STATE_ON					(1 << 0)
+# define SDVO_ENCODER_STATE_STANDBY				(1 << 1)
+# define SDVO_ENCODER_STATE_SUSPEND				(1 << 2)
+# define SDVO_ENCODER_STATE_OFF					(1 << 3)
+
+#define SDVO_CMD_SET_TV_RESOLUTION_SUPPORT		0x93
+
+#define SDVO_CMD_SET_CONTROL_BUS_SWITCH			0x7a
+# define SDVO_CONTROL_BUS_PROM				0x0
+# define SDVO_CONTROL_BUS_DDC1				0x1
+# define SDVO_CONTROL_BUS_DDC2				0x2
+# define SDVO_CONTROL_BUS_DDC3				0x3
+
+/* SDVO Bus & SDVO Inputs wiring details*/
+/* Bit 0: Is SDVOB connected to In0 (1 = yes, 0 = no*/
+/* Bit 1: Is SDVOB connected to In1 (1 = yes, 0 = no*/
+/* Bit 2: Is SDVOC connected to In0 (1 = yes, 0 = no*/
+/* Bit 3: Is SDVOC connected to In1 (1 = yes, 0 = no*/
+#define SDVOB_IN0 0x01
+#define SDVOB_IN1 0x02
+#define SDVOC_IN0 0x04
+#define SDVOC_IN1 0x08
+
+#define SDVO_DEVICE_NONE 0x00
+#define        SDVO_DEVICE_CRT 0x01
+#define        SDVO_DEVICE_TV 0x02
+#define        SDVO_DEVICE_LVDS 0x04
+#define        SDVO_DEVICE_TMDS 0x08
+
diff --git a/drivers/gpu/drm/gma500/psb_lid.c b/drivers/gpu/drm/gma500/psb_lid.c
new file mode 100644
index 0000000..af32851
--- /dev/null
+++ b/drivers/gpu/drm/gma500/psb_lid.c
@@ -0,0 +1,90 @@
+/**************************************************************************
+ * Copyright (c) 2007, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors: Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
+ **************************************************************************/
+
+#include <drm/drmP.h>
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+#include <linux/spinlock.h>
+
+static void psb_lid_timer_func(unsigned long data)
+{
+	struct drm_psb_private * dev_priv = (struct drm_psb_private *)data;
+	struct drm_device *dev = (struct drm_device *)dev_priv->dev;
+	struct timer_list *lid_timer = &dev_priv->lid_timer;
+	unsigned long irq_flags;
+	u32 *lid_state = dev_priv->lid_state;
+	u32 pp_status;
+
+	if (readl(lid_state) == dev_priv->lid_last_state)
+		goto lid_timer_schedule;
+
+	if ((readl(lid_state)) & 0x01) {
+		/*lid state is open*/
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while ((pp_status & PP_ON) == 0);
+
+		/*FIXME: should be backlight level before*/
+		psb_intel_lvds_set_brightness(dev, 100);
+	} else {
+		psb_intel_lvds_set_brightness(dev, 0);
+
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & ~POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while ((pp_status & PP_ON) == 0);
+	}
+		/* printk(KERN_INFO"%s: lid: closed\n", __FUNCTION__); */
+
+	dev_priv->lid_last_state =  readl(lid_state);
+
+lid_timer_schedule:
+	spin_lock_irqsave(&dev_priv->lid_lock, irq_flags);
+	if (!timer_pending(lid_timer)) {
+		lid_timer->expires = jiffies + PSB_LID_DELAY;
+		add_timer(lid_timer);
+	}
+	spin_unlock_irqrestore(&dev_priv->lid_lock, irq_flags);
+}
+
+void psb_lid_timer_init(struct drm_psb_private *dev_priv)
+{
+	struct timer_list *lid_timer = &dev_priv->lid_timer;
+	unsigned long irq_flags;
+
+	spin_lock_init(&dev_priv->lid_lock);
+	spin_lock_irqsave(&dev_priv->lid_lock, irq_flags);
+
+	init_timer(lid_timer);
+
+	lid_timer->data = (unsigned long)dev_priv;
+	lid_timer->function = psb_lid_timer_func;
+	lid_timer->expires = jiffies + PSB_LID_DELAY;
+
+	add_timer(lid_timer);
+	spin_unlock_irqrestore(&dev_priv->lid_lock, irq_flags);
+}
+
+void psb_lid_timer_takedown(struct drm_psb_private *dev_priv)
+{
+	del_timer_sync(&dev_priv->lid_timer);
+}
+

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 10/12] gma500: Add Oaktrail support

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

Oaktrail (GMA600) is found on some tablet/slate PC type systems. It's a bit
different to the GMA500 but similar enough it makes sense to plug it into
the same driver.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/oaktrail.h          |  252 ++++++++
 drivers/gpu/drm/gma500/oaktrail_crtc.c     |  610 ++++++++++++++++++++
 drivers/gpu/drm/gma500/oaktrail_device.c   |  489 ++++++++++++++++
 drivers/gpu/drm/gma500/oaktrail_hdmi.c     |  852 ++++++++++++++++++++++++++++
 drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c |  327 +++++++++++
 drivers/gpu/drm/gma500/oaktrail_lvds.c     |  406 +++++++++++++
 6 files changed, 2936 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpu/drm/gma500/oaktrail.h
 create mode 100644 drivers/gpu/drm/gma500/oaktrail_crtc.c
 create mode 100644 drivers/gpu/drm/gma500/oaktrail_device.c
 create mode 100644 drivers/gpu/drm/gma500/oaktrail_hdmi.c
 create mode 100644 drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c
 create mode 100644 drivers/gpu/drm/gma500/oaktrail_lvds.c


diff --git a/drivers/gpu/drm/gma500/oaktrail.h b/drivers/gpu/drm/gma500/oaktrail.h
new file mode 100644
index 0000000..2da1f36
--- /dev/null
+++ b/drivers/gpu/drm/gma500/oaktrail.h
@@ -0,0 +1,252 @@
+/**************************************************************************
+ * Copyright (c) 2007-2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+/* MID device specific descriptors */
+
+struct oaktrail_vbt {
+	s8 signature[4];	/*4 bytes,"$GCT" */
+	u8 revision;
+	u8 size;
+	u8 checksum;
+	void *oaktrail_gct;
+} __packed;
+
+struct oaktrail_timing_info {
+	u16 pixel_clock;
+	u8 hactive_lo;
+	u8 hblank_lo;
+	u8 hblank_hi:4;
+	u8 hactive_hi:4;
+	u8 vactive_lo;
+	u8 vblank_lo;
+	u8 vblank_hi:4;
+	u8 vactive_hi:4;
+	u8 hsync_offset_lo;
+	u8 hsync_pulse_width_lo;
+	u8 vsync_pulse_width_lo:4;
+	u8 vsync_offset_lo:4;
+	u8 vsync_pulse_width_hi:2;
+	u8 vsync_offset_hi:2;
+	u8 hsync_pulse_width_hi:2;
+	u8 hsync_offset_hi:2;
+	u8 width_mm_lo;
+	u8 height_mm_lo;
+	u8 height_mm_hi:4;
+	u8 width_mm_hi:4;
+	u8 hborder;
+	u8 vborder;
+	u8 unknown0:1;
+	u8 hsync_positive:1;
+	u8 vsync_positive:1;
+	u8 separate_sync:2;
+	u8 stereo:1;
+	u8 unknown6:1;
+	u8 interlaced:1;
+} __packed;
+
+struct gct_r10_timing_info {
+	u16 pixel_clock;
+	u32 hactive_lo:8;
+	u32 hactive_hi:4;
+	u32 hblank_lo:8;
+	u32 hblank_hi:4;
+	u32 hsync_offset_lo:8;
+	u16 hsync_offset_hi:2;
+	u16 hsync_pulse_width_lo:8;
+	u16 hsync_pulse_width_hi:2;
+	u16 hsync_positive:1;
+	u16 rsvd_1:3;
+	u8  vactive_lo:8;
+	u16 vactive_hi:4;
+	u16 vblank_lo:8;
+	u16 vblank_hi:4;
+	u16 vsync_offset_lo:4;
+	u16 vsync_offset_hi:2;
+	u16 vsync_pulse_width_lo:4;
+	u16 vsync_pulse_width_hi:2;
+	u16 vsync_positive:1;
+	u16 rsvd_2:3;
+} __packed;
+
+struct oaktrail_panel_descriptor_v1 {
+	u32 Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */
+				/* 0x61190 if MIPI */
+	u32 Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/
+	u32 Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/
+	u32 Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 dword */
+						/* Register 0x61210 */
+	struct oaktrail_timing_info DTD;/*18 bytes, Standard definition */
+	u16 Panel_Backlight_Inverter_Descriptor;/* 16 bits, as follows */
+				/* Bit 0, Frequency, 15 bits,0 - 32767Hz */
+			/* Bit 15, Polarity, 1 bit, 0: Normal, 1: Inverted */
+	u16 Panel_MIPI_Display_Descriptor;
+			/*16 bits, Defined as follows: */
+			/* if MIPI, 0x0000 if LVDS */
+			/* Bit 0, Type, 2 bits, */
+			/* 0: Type-1, */
+			/* 1: Type-2, */
+			/* 2: Type-3, */
+			/* 3: Type-4 */
+			/* Bit 2, Pixel Format, 4 bits */
+			/* Bit0: 16bpp (not supported in LNC), */
+			/* Bit1: 18bpp loosely packed, */
+			/* Bit2: 18bpp packed, */
+			/* Bit3: 24bpp */
+			/* Bit 6, Reserved, 2 bits, 00b */
+			/* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */
+			/* Bit 14, Reserved, 2 bits, 00b */
+} __packed;
+
+struct oaktrail_panel_descriptor_v2 {
+	u32 Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */
+				/* 0x61190 if MIPI */
+	u32 Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/
+	u32 Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/
+	u8 Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 byte */
+						/* Register 0x61210 */
+	struct oaktrail_timing_info DTD;/*18 bytes, Standard definition */
+	u16 Panel_Backlight_Inverter_Descriptor;/*16 bits, as follows*/
+				/*Bit 0, Frequency, 16 bits, 0 - 32767Hz*/
+	u8 Panel_Initial_Brightness;/* [7:0] 0 - 100% */
+			/*Bit 7, Polarity, 1 bit,0: Normal, 1: Inverted*/
+	u16 Panel_MIPI_Display_Descriptor;
+			/*16 bits, Defined as follows: */
+			/* if MIPI, 0x0000 if LVDS */
+			/* Bit 0, Type, 2 bits, */
+			/* 0: Type-1, */
+			/* 1: Type-2, */
+			/* 2: Type-3, */
+			/* 3: Type-4 */
+			/* Bit 2, Pixel Format, 4 bits */
+			/* Bit0: 16bpp (not supported in LNC), */
+			/* Bit1: 18bpp loosely packed, */
+			/* Bit2: 18bpp packed, */
+			/* Bit3: 24bpp */
+			/* Bit 6, Reserved, 2 bits, 00b */
+			/* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */
+			/* Bit 14, Reserved, 2 bits, 00b */
+} __packed;
+
+union oaktrail_panel_rx {
+	struct {
+		u16 NumberOfLanes:2; /*Num of Lanes, 2 bits,0 = 1 lane,*/
+			/* 1 = 2 lanes, 2 = 3 lanes, 3 = 4 lanes. */
+		u16 MaxLaneFreq:3; /* 0: 100MHz, 1: 200MHz, 2: 300MHz, */
+		/*3: 400MHz, 4: 500MHz, 5: 600MHz, 6: 700MHz, 7: 800MHz.*/
+		u16 SupportedVideoTransferMode:2; /*0: Non-burst only */
+					/* 1: Burst and non-burst */
+					/* 2/3: Reserved */
+		u16 HSClkBehavior:1; /*0: Continuous, 1: Non-continuous*/
+		u16 DuoDisplaySupport:1; /*1 bit,0: No, 1: Yes*/
+		u16 ECC_ChecksumCapabilities:1;/*1 bit,0: No, 1: Yes*/
+		u16 BidirectionalCommunication:1;/*1 bit,0: No, 1: Yes */
+		u16 Rsvd:5;/*5 bits,00000b */
+	} panelrx;
+	u16 panel_receiver;
+} __packed;
+
+struct oaktrail_gct_v1 {
+	union { /*8 bits,Defined as follows: */
+		struct {
+			u8 PanelType:4; /*4 bits, Bit field for panels*/
+					/* 0 - 3: 0 = LVDS, 1 = MIPI*/
+					/*2 bits,Specifies which of the*/
+			u8 BootPanelIndex:2;
+					/* 4 panels to use by default*/
+			u8 BootMIPI_DSI_RxIndex:2;/*Specifies which of*/
+					/* the 4 MIPI DSI receivers to use*/
+		} PD;
+		u8 PanelDescriptor;
+	};
+	struct oaktrail_panel_descriptor_v1 panel[4];/*panel descrs,38 bytes each*/
+	union oaktrail_panel_rx panelrx[4]; /* panel receivers*/
+} __packed;
+
+struct oaktrail_gct_v2 {
+	union { /*8 bits,Defined as follows: */
+		struct {
+			u8 PanelType:4; /*4 bits, Bit field for panels*/
+					/* 0 - 3: 0 = LVDS, 1 = MIPI*/
+					/*2 bits,Specifies which of the*/
+			u8 BootPanelIndex:2;
+					/* 4 panels to use by default*/
+			u8 BootMIPI_DSI_RxIndex:2;/*Specifies which of*/
+					/* the 4 MIPI DSI receivers to use*/
+		} PD;
+		u8 PanelDescriptor;
+	};
+	struct oaktrail_panel_descriptor_v2 panel[4];/*panel descrs,38 bytes each*/
+	union oaktrail_panel_rx panelrx[4]; /* panel receivers*/
+} __packed;
+
+struct oaktrail_gct_data {
+	u8 bpi; /* boot panel index, number of panel used during boot */
+	u8 pt; /* panel type, 4 bit field, 0=lvds, 1=mipi */
+	struct oaktrail_timing_info DTD; /* timing info for the selected panel */
+	u32 Panel_Port_Control;
+	u32 PP_On_Sequencing;/*1 dword,Register 0x61208,*/
+	u32 PP_Off_Sequencing;/*1 dword,Register 0x6120C,*/
+	u32 PP_Cycle_Delay;
+	u16 Panel_Backlight_Inverter_Descriptor;
+	u16 Panel_MIPI_Display_Descriptor;
+} __packed;
+
+#define MODE_SETTING_IN_CRTC		0x1
+#define MODE_SETTING_IN_ENCODER		0x2
+#define MODE_SETTING_ON_GOING		0x3
+#define MODE_SETTING_IN_DSR		0x4
+#define MODE_SETTING_ENCODER_DONE	0x8
+
+#define GCT_R10_HEADER_SIZE		16
+#define GCT_R10_DISPLAY_DESC_SIZE	28
+
+/*
+ *	Moorestown HDMI interfaces
+ */
+
+struct oaktrail_hdmi_dev {
+	struct pci_dev *dev;
+	void __iomem *regs;
+	unsigned int mmio, mmio_len;
+	int dpms_mode;
+	struct hdmi_i2c_dev *i2c_dev;
+
+	/* register state */
+	u32 saveDPLL_CTRL;
+	u32 saveDPLL_DIV_CTRL;
+	u32 saveDPLL_ADJUST;
+	u32 saveDPLL_UPDATE;
+	u32 saveDPLL_CLK_ENABLE;
+	u32 savePCH_HTOTAL_B;
+	u32 savePCH_HBLANK_B;
+	u32 savePCH_HSYNC_B;
+	u32 savePCH_VTOTAL_B;
+	u32 savePCH_VBLANK_B;
+	u32 savePCH_VSYNC_B;
+	u32 savePCH_PIPEBCONF;
+	u32 savePCH_PIPEBSRC;
+};
+
+extern void oaktrail_hdmi_setup(struct drm_device *dev);
+extern void oaktrail_hdmi_teardown(struct drm_device *dev);
+extern int  oaktrail_hdmi_i2c_init(struct pci_dev *dev);
+extern void oaktrail_hdmi_i2c_exit(struct pci_dev *dev);
+extern void oaktrail_hdmi_save(struct drm_device *dev);
+extern void oaktrail_hdmi_restore(struct drm_device *dev);
+extern void oaktrail_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev);
diff --git a/drivers/gpu/drm/gma500/oaktrail_crtc.c b/drivers/gpu/drm/gma500/oaktrail_crtc.c
new file mode 100644
index 0000000..7f9c791
--- /dev/null
+++ b/drivers/gpu/drm/gma500/oaktrail_crtc.c
@@ -0,0 +1,610 @@
+/*
+ * Copyright © 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+
+#include <drm/drmP.h>
+#include "framebuffer.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "psb_intel_display.h"
+#include "power.h"
+
+struct psb_intel_range_t {
+	int min, max;
+};
+
+struct oaktrail_limit_t {
+	struct psb_intel_range_t dot, m, p1;
+};
+
+struct oaktrail_clock_t {
+	/* derived values */
+	int dot;
+	int m;
+	int p1;
+};
+
+#define MRST_LIMIT_LVDS_100L	    0
+#define MRST_LIMIT_LVDS_83	    1
+#define MRST_LIMIT_LVDS_100	    2
+
+#define MRST_DOT_MIN		  19750
+#define MRST_DOT_MAX		  120000
+#define MRST_M_MIN_100L		    20
+#define MRST_M_MIN_100		    10
+#define MRST_M_MIN_83		    12
+#define MRST_M_MAX_100L		    34
+#define MRST_M_MAX_100		    17
+#define MRST_M_MAX_83		    20
+#define MRST_P1_MIN		    2
+#define MRST_P1_MAX_0		    7
+#define MRST_P1_MAX_1		    8
+
+static const struct oaktrail_limit_t oaktrail_limits[] = {
+	{			/* MRST_LIMIT_LVDS_100L */
+	 .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
+	 .m = {.min = MRST_M_MIN_100L, .max = MRST_M_MAX_100L},
+	 .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1},
+	 },
+	{			/* MRST_LIMIT_LVDS_83L */
+	 .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
+	 .m = {.min = MRST_M_MIN_83, .max = MRST_M_MAX_83},
+	 .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_0},
+	 },
+	{			/* MRST_LIMIT_LVDS_100 */
+	 .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
+	 .m = {.min = MRST_M_MIN_100, .max = MRST_M_MAX_100},
+	 .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1},
+	 },
+};
+
+#define MRST_M_MIN	    10
+static const u32 oaktrail_m_converts[] = {
+	0x2B, 0x15, 0x2A, 0x35, 0x1A, 0x0D, 0x26, 0x33, 0x19, 0x2C,
+	0x36, 0x3B, 0x1D, 0x2E, 0x37, 0x1B, 0x2D, 0x16, 0x0B, 0x25,
+	0x12, 0x09, 0x24, 0x32, 0x39, 0x1c,
+};
+
+static const struct oaktrail_limit_t *oaktrail_limit(struct drm_crtc *crtc)
+{
+	const struct oaktrail_limit_t *limit = NULL;
+	struct drm_device *dev = crtc->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
+	    || psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)) {
+		switch (dev_priv->core_freq) {
+		case 100:
+			limit = &oaktrail_limits[MRST_LIMIT_LVDS_100L];
+			break;
+		case 166:
+			limit = &oaktrail_limits[MRST_LIMIT_LVDS_83];
+			break;
+		case 200:
+			limit = &oaktrail_limits[MRST_LIMIT_LVDS_100];
+			break;
+		}
+	} else {
+		limit = NULL;
+		dev_err(dev->dev, "oaktrail_limit Wrong display type.\n");
+	}
+
+	return limit;
+}
+
+/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
+static void oaktrail_clock(int refclk, struct oaktrail_clock_t *clock)
+{
+	clock->dot = (refclk * clock->m) / (14 * clock->p1);
+}
+
+void mrstPrintPll(char *prefix, struct oaktrail_clock_t *clock)
+{
+	pr_debug("%s: dotclock = %d,  m = %d, p1 = %d.\n",
+	     prefix, clock->dot, clock->m, clock->p1);
+}
+
+/**
+ * Returns a set of divisors for the desired target clock with the given refclk,
+ * or FALSE.  Divisor values are the actual divisors for
+ */
+static bool
+mrstFindBestPLL(struct drm_crtc *crtc, int target, int refclk,
+		struct oaktrail_clock_t *best_clock)
+{
+	struct oaktrail_clock_t clock;
+	const struct oaktrail_limit_t *limit = oaktrail_limit(crtc);
+	int err = target;
+
+	memset(best_clock, 0, sizeof(*best_clock));
+
+	for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
+		for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max;
+		     clock.p1++) {
+			int this_err;
+
+			oaktrail_clock(refclk, &clock);
+
+			this_err = abs(clock.dot - target);
+			if (this_err < err) {
+				*best_clock = clock;
+				err = this_err;
+			}
+		}
+	}
+	dev_dbg(crtc->dev->dev, "mrstFindBestPLL err = %d.\n", err);
+	return err != target;
+}
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ *
+ * This code should probably grow support for turning the cursor off and back
+ * on appropriately at the same time as we're turning the pipe off/on.
+ */
+static void oaktrail_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int pipe = psb_intel_crtc->pipe;
+	int dpll_reg = (pipe == 0) ? MRST_DPLL_A : DPLL_B;
+	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+	int dspbase_reg = (pipe == 0) ? MRST_DSPABASE : DSPBBASE;
+	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+	u32 temp;
+	bool enabled;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	/* XXX: When our outputs are all unaware of DPMS modes other than off
+	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+	 */
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+		/* Enable the DPLL */
+		temp = REG_READ(dpll_reg);
+		if ((temp & DPLL_VCO_ENABLE) == 0) {
+			REG_WRITE(dpll_reg, temp);
+			REG_READ(dpll_reg);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+			REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+			REG_READ(dpll_reg);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+			REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+			REG_READ(dpll_reg);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+		}
+		/* Enable the pipe */
+		temp = REG_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_ENABLE) == 0)
+			REG_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
+		/* Enable the plane */
+		temp = REG_READ(dspcntr_reg);
+		if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+			REG_WRITE(dspcntr_reg,
+				  temp | DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+		}
+
+		psb_intel_crtc_load_lut(crtc);
+
+		/* Give the overlay scaler a chance to enable
+		   if it's on this pipe */
+		/* psb_intel_crtc_dpms_video(crtc, true); TODO */
+		break;
+	case DRM_MODE_DPMS_OFF:
+		/* Give the overlay scaler a chance to disable
+		 * if it's on this pipe */
+		/* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
+
+		/* Disable the VGA plane that we never use */
+		REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+		/* Disable display plane */
+		temp = REG_READ(dspcntr_reg);
+		if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+			REG_WRITE(dspcntr_reg,
+				  temp & ~DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+			REG_READ(dspbase_reg);
+		}
+
+		/* Next, disable display pipes */
+		temp = REG_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_ENABLE) != 0) {
+			REG_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
+			REG_READ(pipeconf_reg);
+		}
+		/* Wait for for the pipe disable to take effect. */
+		psb_intel_wait_for_vblank(dev);
+
+		temp = REG_READ(dpll_reg);
+		if ((temp & DPLL_VCO_ENABLE) != 0) {
+			REG_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
+			REG_READ(dpll_reg);
+		}
+
+		/* Wait for the clocks to turn off. */
+		udelay(150);
+		break;
+	}
+
+	enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
+
+	/*Set FIFO Watermarks*/
+	REG_WRITE(DSPARB, 0x3FFF);
+	REG_WRITE(DSPFW1, 0x3F88080A);
+	REG_WRITE(DSPFW2, 0x0b060808);
+	REG_WRITE(DSPFW3, 0x0);
+	REG_WRITE(DSPFW4, 0x08030404);
+	REG_WRITE(DSPFW5, 0x04040404);
+	REG_WRITE(DSPFW6, 0x78);
+	REG_WRITE(0x70400, REG_READ(0x70400) | 0x4000);
+	/* Must write Bit 14 of the Chicken Bit Register */
+
+	gma_power_end(dev);
+}
+
+/**
+ * Return the pipe currently connected to the panel fitter,
+ * or -1 if the panel fitter is not present or not in use
+ */
+static int oaktrail_panel_fitter_pipe(struct drm_device *dev)
+{
+	u32 pfit_control;
+
+	pfit_control = REG_READ(PFIT_CONTROL);
+
+	/* See if the panel fitter is in use */
+	if ((pfit_control & PFIT_ENABLE) == 0)
+		return -1;
+	return (pfit_control >> 29) & 3;
+}
+
+static int oaktrail_crtc_mode_set(struct drm_crtc *crtc,
+			      struct drm_display_mode *mode,
+			      struct drm_display_mode *adjusted_mode,
+			      int x, int y,
+			      struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int pipe = psb_intel_crtc->pipe;
+	int fp_reg = (pipe == 0) ? MRST_FPA0 : FPB0;
+	int dpll_reg = (pipe == 0) ? MRST_DPLL_A : DPLL_B;
+	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+	int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
+	int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
+	int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
+	int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
+	int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
+	int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
+	int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
+	int refclk = 0;
+	struct oaktrail_clock_t clock;
+	u32 dpll = 0, fp = 0, dspcntr, pipeconf;
+	bool ok, is_sdvo = false;
+	bool is_crt = false, is_lvds = false, is_tv = false;
+	bool is_mipi = false;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct psb_intel_output *psb_intel_output = NULL;
+	uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN;
+	struct drm_encoder *encoder;
+
+	if (!gma_power_begin(dev, true))
+		return 0;
+
+	memcpy(&psb_intel_crtc->saved_mode,
+		mode,
+		sizeof(struct drm_display_mode));
+	memcpy(&psb_intel_crtc->saved_adjusted_mode,
+		adjusted_mode,
+		sizeof(struct drm_display_mode));
+
+	list_for_each_entry(encoder, &mode_config->encoder_list, head) {
+
+		if (encoder->crtc != crtc)
+			continue;
+
+		psb_intel_output = enc_to_psb_intel_output(encoder);
+		switch (psb_intel_output->type) {
+		case INTEL_OUTPUT_LVDS:
+			is_lvds = true;
+			break;
+		case INTEL_OUTPUT_SDVO:
+			is_sdvo = true;
+			break;
+		case INTEL_OUTPUT_TVOUT:
+			is_tv = true;
+			break;
+		case INTEL_OUTPUT_ANALOG:
+			is_crt = true;
+			break;
+		case INTEL_OUTPUT_MIPI:
+			is_mipi = true;
+			break;
+		}
+	}
+
+	/* Disable the VGA plane that we never use */
+	REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+
+	/* Disable the panel fitter if it was on our pipe */
+	if (oaktrail_panel_fitter_pipe(dev) == pipe)
+		REG_WRITE(PFIT_CONTROL, 0);
+
+	REG_WRITE(pipesrc_reg,
+		  ((mode->crtc_hdisplay - 1) << 16) |
+		  (mode->crtc_vdisplay - 1));
+
+	if (psb_intel_output)
+		drm_connector_property_get_value(&psb_intel_output->base,
+			dev->mode_config.scaling_mode_property, &scalingType);
+
+	if (scalingType == DRM_MODE_SCALE_NO_SCALE) {
+		/* Moorestown doesn't have register support for centering so
+		 * we need to mess with the h/vblank and h/vsync start and
+		 * ends to get centering */
+		int offsetX = 0, offsetY = 0;
+
+		offsetX = (adjusted_mode->crtc_hdisplay -
+			   mode->crtc_hdisplay) / 2;
+		offsetY = (adjusted_mode->crtc_vdisplay -
+			   mode->crtc_vdisplay) / 2;
+
+		REG_WRITE(htot_reg, (mode->crtc_hdisplay - 1) |
+			((adjusted_mode->crtc_htotal - 1) << 16));
+		REG_WRITE(vtot_reg, (mode->crtc_vdisplay - 1) |
+			((adjusted_mode->crtc_vtotal - 1) << 16));
+		REG_WRITE(hblank_reg,
+			(adjusted_mode->crtc_hblank_start - offsetX - 1) |
+			((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16));
+		REG_WRITE(hsync_reg,
+			(adjusted_mode->crtc_hsync_start - offsetX - 1) |
+			((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16));
+		REG_WRITE(vblank_reg,
+			(adjusted_mode->crtc_vblank_start - offsetY - 1) |
+			((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16));
+		REG_WRITE(vsync_reg,
+			(adjusted_mode->crtc_vsync_start - offsetY - 1) |
+			((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16));
+	} else {
+		REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
+			((adjusted_mode->crtc_htotal - 1) << 16));
+		REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
+			((adjusted_mode->crtc_vtotal - 1) << 16));
+		REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
+			((adjusted_mode->crtc_hblank_end - 1) << 16));
+		REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
+			((adjusted_mode->crtc_hsync_end - 1) << 16));
+		REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
+			((adjusted_mode->crtc_vblank_end - 1) << 16));
+		REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
+			((adjusted_mode->crtc_vsync_end - 1) << 16));
+	}
+
+	/* Flush the plane changes */
+	{
+		struct drm_crtc_helper_funcs *crtc_funcs =
+		    crtc->helper_private;
+		crtc_funcs->mode_set_base(crtc, x, y, old_fb);
+	}
+
+	/* setup pipeconf */
+	pipeconf = REG_READ(pipeconf_reg);
+
+	/* Set up the display plane register */
+	dspcntr = REG_READ(dspcntr_reg);
+	dspcntr |= DISPPLANE_GAMMA_ENABLE;
+
+	if (pipe == 0)
+		dspcntr |= DISPPLANE_SEL_PIPE_A;
+	else
+		dspcntr |= DISPPLANE_SEL_PIPE_B;
+
+	dev_priv->dspcntr = dspcntr |= DISPLAY_PLANE_ENABLE;
+	dev_priv->pipeconf = pipeconf |= PIPEACONF_ENABLE;
+
+	if (is_mipi)
+		goto oaktrail_crtc_mode_set_exit;
+
+	refclk = dev_priv->core_freq * 1000;
+
+	dpll = 0;		/*BIT16 = 0 for 100MHz reference */
+
+	ok = mrstFindBestPLL(crtc, adjusted_mode->clock, refclk, &clock);
+
+	if (!ok) {
+		dev_dbg(dev->dev, "mrstFindBestPLL fail in oaktrail_crtc_mode_set.\n");
+	} else {
+		dev_dbg(dev->dev, "oaktrail_crtc_mode_set pixel clock = %d,"
+			 "m = %x, p1 = %x.\n", clock.dot, clock.m,
+			 clock.p1);
+	}
+
+	fp = oaktrail_m_converts[(clock.m - MRST_M_MIN)] << 8;
+
+	dpll |= DPLL_VGA_MODE_DIS;
+
+
+	dpll |= DPLL_VCO_ENABLE;
+
+	if (is_lvds)
+		dpll |= DPLLA_MODE_LVDS;
+	else
+		dpll |= DPLLB_MODE_DAC_SERIAL;
+
+	if (is_sdvo) {
+		int sdvo_pixel_multiply =
+		    adjusted_mode->clock / mode->clock;
+
+		dpll |= DPLL_DVO_HIGH_SPEED;
+		dpll |=
+		    (sdvo_pixel_multiply -
+		     1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+	}
+
+
+	/* compute bitmask from p1 value */
+	dpll |= (1 << (clock.p1 - 2)) << 17;
+
+	dpll |= DPLL_VCO_ENABLE;
+
+	mrstPrintPll("chosen", &clock);
+
+	if (dpll & DPLL_VCO_ENABLE) {
+		REG_WRITE(fp_reg, fp);
+		REG_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
+		REG_READ(dpll_reg);
+		/* Check the DPLLA lock bit PIPEACONF[29] */
+		udelay(150);
+	}
+
+	REG_WRITE(fp_reg, fp);
+	REG_WRITE(dpll_reg, dpll);
+	REG_READ(dpll_reg);
+	/* Wait for the clocks to stabilize. */
+	udelay(150);
+
+	/* write it again -- the BIOS does, after all */
+	REG_WRITE(dpll_reg, dpll);
+	REG_READ(dpll_reg);
+	/* Wait for the clocks to stabilize. */
+	udelay(150);
+
+	REG_WRITE(pipeconf_reg, pipeconf);
+	REG_READ(pipeconf_reg);
+	psb_intel_wait_for_vblank(dev);
+
+	REG_WRITE(dspcntr_reg, dspcntr);
+	psb_intel_wait_for_vblank(dev);
+
+oaktrail_crtc_mode_set_exit:
+	gma_power_end(dev);
+	return 0;
+}
+
+static bool oaktrail_crtc_mode_fixup(struct drm_crtc *crtc,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+int oaktrail_pipe_set_base(struct drm_crtc *crtc,
+			    int x, int y, struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	/* struct drm_i915_master_private *master_priv; */
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
+	int pipe = psb_intel_crtc->pipe;
+	unsigned long start, offset;
+	/* FIXME: check if we need this surely MRST is pipe 0 only */
+	int dspbase = (pipe == 0 ? DSPALINOFF : DSPBBASE);
+	int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
+	int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
+	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+	u32 dspcntr;
+	int ret = 0;
+
+	/* no fb bound */
+	if (!crtc->fb) {
+		dev_dbg(dev->dev, "No FB bound\n");
+		return 0;
+	}
+
+	if (!gma_power_begin(dev, true))
+		return 0;
+
+	start = psbfb->gtt->offset;
+	offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
+
+	REG_WRITE(dspstride, crtc->fb->pitch);
+
+	dspcntr = REG_READ(dspcntr_reg);
+	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+
+	switch (crtc->fb->bits_per_pixel) {
+	case 8:
+		dspcntr |= DISPPLANE_8BPP;
+		break;
+	case 16:
+		if (crtc->fb->depth == 15)
+			dspcntr |= DISPPLANE_15_16BPP;
+		else
+			dspcntr |= DISPPLANE_16BPP;
+		break;
+	case 24:
+	case 32:
+		dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+		break;
+	default:
+		dev_err(dev->dev, "Unknown color depth\n");
+		ret = -EINVAL;
+		goto pipe_set_base_exit;
+	}
+	REG_WRITE(dspcntr_reg, dspcntr);
+
+	if (0 /* FIXMEAC - check what PSB needs */) {
+		REG_WRITE(dspbase, offset);
+		REG_READ(dspbase);
+		REG_WRITE(dspsurf, start);
+		REG_READ(dspsurf);
+	} else {
+		REG_WRITE(dspbase, start + offset);
+		REG_READ(dspbase);
+	}
+
+pipe_set_base_exit:
+	gma_power_end(dev);
+	return ret;
+}
+
+static void oaktrail_crtc_prepare(struct drm_crtc *crtc)
+{
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+static void oaktrail_crtc_commit(struct drm_crtc *crtc)
+{
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+const struct drm_crtc_helper_funcs oaktrail_helper_funcs = {
+	.dpms = oaktrail_crtc_dpms,
+	.mode_fixup = oaktrail_crtc_mode_fixup,
+	.mode_set = oaktrail_crtc_mode_set,
+	.mode_set_base = oaktrail_pipe_set_base,
+	.prepare = oaktrail_crtc_prepare,
+	.commit = oaktrail_crtc_commit,
+};
+
diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c
new file mode 100644
index 0000000..41c418f
--- /dev/null
+++ b/drivers/gpu/drm/gma500/oaktrail_device.c
@@ -0,0 +1,489 @@
+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include <linux/backlight.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "psb_drm.h"
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+#include <asm/mrst.h>
+#include <asm/intel_scu_ipc.h>
+#include "mid_bios.h"
+
+static int oaktrail_output_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	if (dev_priv->iLVDS_enable)
+		oaktrail_lvds_init(dev, &dev_priv->mode_dev);
+	else
+		dev_err(dev->dev, "DSI is not supported\n");
+	if (dev_priv->hdmi_priv)
+		oaktrail_hdmi_init(dev, &dev_priv->mode_dev);
+	return 0;
+}
+
+/*
+ *	Provide the low level interfaces for the Moorestown backlight
+ */
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+
+#define MRST_BLC_MAX_PWM_REG_FREQ	    0xFFFF
+#define BLC_PWM_PRECISION_FACTOR 100	/* 10000000 */
+#define BLC_PWM_FREQ_CALC_CONSTANT 32
+#define MHz 1000000
+#define BLC_ADJUSTMENT_MAX 100
+
+static struct backlight_device *oaktrail_backlight_device;
+static int oaktrail_brightness;
+
+static int oaktrail_set_brightness(struct backlight_device *bd)
+{
+	struct drm_device *dev = bl_get_data(oaktrail_backlight_device);
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int level = bd->props.brightness;
+	u32 blc_pwm_ctl;
+	u32 max_pwm_blc;
+
+	/* Percentage 1-100% being valid */
+	if (level < 1)
+		level = 1;
+
+	if (gma_power_begin(dev, 0)) {
+		/* Calculate and set the brightness value */
+		max_pwm_blc = REG_READ(BLC_PWM_CTL) >> 16;
+		blc_pwm_ctl = level * max_pwm_blc / 100;
+
+		/* Adjust the backlight level with the percent in
+		 * dev_priv->blc_adj1;
+		 */
+		blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj1;
+		blc_pwm_ctl = blc_pwm_ctl / 100;
+
+		/* Adjust the backlight level with the percent in
+		 * dev_priv->blc_adj2;
+		 */
+		blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj2;
+		blc_pwm_ctl = blc_pwm_ctl / 100;
+
+		/* force PWM bit on */
+		REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
+		REG_WRITE(BLC_PWM_CTL, (max_pwm_blc << 16) | blc_pwm_ctl);
+		gma_power_end(dev);
+	}
+	oaktrail_brightness = level;
+	return 0;
+}
+
+static int oaktrail_get_brightness(struct backlight_device *bd)
+{
+	/* return locally cached var instead of HW read (due to DPST etc.) */
+	/* FIXME: ideally return actual value in case firmware fiddled with
+	   it */
+	return oaktrail_brightness;
+}
+
+static int device_backlight_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	unsigned long core_clock;
+	u16 bl_max_freq;
+	uint32_t value;
+	uint32_t blc_pwm_precision_factor;
+
+	dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX;
+	dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX;
+	bl_max_freq = 256;
+	/* this needs to be set elsewhere */
+	blc_pwm_precision_factor = BLC_PWM_PRECISION_FACTOR;
+
+	core_clock = dev_priv->core_freq;
+
+	value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
+	value *= blc_pwm_precision_factor;
+	value /= bl_max_freq;
+	value /= blc_pwm_precision_factor;
+
+	if (value > (unsigned long long)MRST_BLC_MAX_PWM_REG_FREQ)
+			return -ERANGE;
+
+	if (gma_power_begin(dev, false)) {
+		REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
+		REG_WRITE(BLC_PWM_CTL, value | (value << 16));
+		gma_power_end(dev);
+	}
+	return 0;
+}
+
+static const struct backlight_ops oaktrail_ops = {
+	.get_brightness = oaktrail_get_brightness,
+	.update_status  = oaktrail_set_brightness,
+};
+
+int oaktrail_backlight_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int ret;
+	struct backlight_properties props;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 100;
+	props.type = BACKLIGHT_PLATFORM;
+
+	oaktrail_backlight_device = backlight_device_register("oaktrail-bl",
+				NULL, (void *)dev, &oaktrail_ops, &props);
+
+	if (IS_ERR(oaktrail_backlight_device))
+		return PTR_ERR(oaktrail_backlight_device);
+
+	ret = device_backlight_init(dev);
+	if (ret < 0) {
+		backlight_device_unregister(oaktrail_backlight_device);
+		return ret;
+	}
+	oaktrail_backlight_device->props.brightness = 100;
+	oaktrail_backlight_device->props.max_brightness = 100;
+	backlight_update_status(oaktrail_backlight_device);
+	dev_priv->backlight_device = oaktrail_backlight_device;
+	return 0;
+}
+
+#endif
+
+/*
+ *	Provide the Moorestown specific chip logic and low level methods
+ *	for power management
+ */
+
+static void oaktrail_init_pm(struct drm_device *dev)
+{
+}
+
+/**
+ *	oaktrail_save_display_registers	-	save registers lost on suspend
+ *	@dev: our DRM device
+ *
+ *	Save the state we need in order to be able to restore the interface
+ *	upon resume from suspend
+ */
+static int oaktrail_save_display_registers(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int i;
+	u32 pp_stat;
+
+	/* Display arbitration control + watermarks */
+	dev_priv->saveDSPARB = PSB_RVDC32(DSPARB);
+	dev_priv->saveDSPFW1 = PSB_RVDC32(DSPFW1);
+	dev_priv->saveDSPFW2 = PSB_RVDC32(DSPFW2);
+	dev_priv->saveDSPFW3 = PSB_RVDC32(DSPFW3);
+	dev_priv->saveDSPFW4 = PSB_RVDC32(DSPFW4);
+	dev_priv->saveDSPFW5 = PSB_RVDC32(DSPFW5);
+	dev_priv->saveDSPFW6 = PSB_RVDC32(DSPFW6);
+	dev_priv->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
+
+	/* Pipe & plane A info */
+	dev_priv->savePIPEACONF = PSB_RVDC32(PIPEACONF);
+	dev_priv->savePIPEASRC = PSB_RVDC32(PIPEASRC);
+	dev_priv->saveFPA0 = PSB_RVDC32(MRST_FPA0);
+	dev_priv->saveFPA1 = PSB_RVDC32(MRST_FPA1);
+	dev_priv->saveDPLL_A = PSB_RVDC32(MRST_DPLL_A);
+	dev_priv->saveHTOTAL_A = PSB_RVDC32(HTOTAL_A);
+	dev_priv->saveHBLANK_A = PSB_RVDC32(HBLANK_A);
+	dev_priv->saveHSYNC_A = PSB_RVDC32(HSYNC_A);
+	dev_priv->saveVTOTAL_A = PSB_RVDC32(VTOTAL_A);
+	dev_priv->saveVBLANK_A = PSB_RVDC32(VBLANK_A);
+	dev_priv->saveVSYNC_A = PSB_RVDC32(VSYNC_A);
+	dev_priv->saveBCLRPAT_A = PSB_RVDC32(BCLRPAT_A);
+	dev_priv->saveDSPACNTR = PSB_RVDC32(DSPACNTR);
+	dev_priv->saveDSPASTRIDE = PSB_RVDC32(DSPASTRIDE);
+	dev_priv->saveDSPAADDR = PSB_RVDC32(DSPABASE);
+	dev_priv->saveDSPASURF = PSB_RVDC32(DSPASURF);
+	dev_priv->saveDSPALINOFF = PSB_RVDC32(DSPALINOFF);
+	dev_priv->saveDSPATILEOFF = PSB_RVDC32(DSPATILEOFF);
+
+	/* Save cursor regs */
+	dev_priv->saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR);
+	dev_priv->saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE);
+	dev_priv->saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS);
+
+	/* Save palette (gamma) */
+	for (i = 0; i < 256; i++)
+		dev_priv->save_palette_a[i] = PSB_RVDC32(PALETTE_A + (i << 2));
+
+	if (dev_priv->hdmi_priv)
+		oaktrail_hdmi_save(dev);
+
+	/* Save performance state */
+	dev_priv->savePERF_MODE = PSB_RVDC32(MRST_PERF_MODE);
+
+	/* LVDS state */
+	dev_priv->savePP_CONTROL = PSB_RVDC32(PP_CONTROL);
+	dev_priv->savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS);
+	dev_priv->savePFIT_AUTO_RATIOS = PSB_RVDC32(PFIT_AUTO_RATIOS);
+	dev_priv->saveBLC_PWM_CTL = PSB_RVDC32(BLC_PWM_CTL);
+	dev_priv->saveBLC_PWM_CTL2 = PSB_RVDC32(BLC_PWM_CTL2);
+	dev_priv->saveLVDS = PSB_RVDC32(LVDS);
+	dev_priv->savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL);
+	dev_priv->savePP_ON_DELAYS = PSB_RVDC32(LVDSPP_ON);
+	dev_priv->savePP_OFF_DELAYS = PSB_RVDC32(LVDSPP_OFF);
+	dev_priv->savePP_DIVISOR = PSB_RVDC32(PP_CYCLE);
+
+	/* HW overlay */
+	dev_priv->saveOV_OVADD = PSB_RVDC32(OV_OVADD);
+	dev_priv->saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0);
+	dev_priv->saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1);
+	dev_priv->saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2);
+	dev_priv->saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3);
+	dev_priv->saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4);
+	dev_priv->saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5);
+
+	/* DPST registers */
+	dev_priv->saveHISTOGRAM_INT_CONTROL_REG =
+					PSB_RVDC32(HISTOGRAM_INT_CONTROL);
+	dev_priv->saveHISTOGRAM_LOGIC_CONTROL_REG =
+					PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL);
+	dev_priv->savePWM_CONTROL_LOGIC = PSB_RVDC32(PWM_CONTROL_LOGIC);
+
+	if (dev_priv->iLVDS_enable) {
+		/* Shut down the panel */
+		PSB_WVDC32(0, PP_CONTROL);
+
+		do {
+			pp_stat = PSB_RVDC32(PP_STATUS);
+		} while (pp_stat & 0x80000000);
+
+		/* Turn off the plane */
+		PSB_WVDC32(0x58000000, DSPACNTR);
+		/* Trigger the plane disable */
+		PSB_WVDC32(0, DSPASURF);
+
+		/* Wait ~4 ticks */
+		msleep(4);
+
+		/* Turn off pipe */
+		PSB_WVDC32(0x0, PIPEACONF);
+		/* Wait ~8 ticks */
+		msleep(8);
+
+		/* Turn off PLLs */
+		PSB_WVDC32(0, MRST_DPLL_A);
+	}
+	return 0;
+}
+
+/**
+ *	oaktrail_restore_display_registers	-	restore lost register state
+ *	@dev: our DRM device
+ *
+ *	Restore register state that was lost during suspend and resume.
+ */
+static int oaktrail_restore_display_registers(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 pp_stat;
+	int i;
+
+	/* Display arbitration + watermarks */
+	PSB_WVDC32(dev_priv->saveDSPARB, DSPARB);
+	PSB_WVDC32(dev_priv->saveDSPFW1, DSPFW1);
+	PSB_WVDC32(dev_priv->saveDSPFW2, DSPFW2);
+	PSB_WVDC32(dev_priv->saveDSPFW3, DSPFW3);
+	PSB_WVDC32(dev_priv->saveDSPFW4, DSPFW4);
+	PSB_WVDC32(dev_priv->saveDSPFW5, DSPFW5);
+	PSB_WVDC32(dev_priv->saveDSPFW6, DSPFW6);
+	PSB_WVDC32(dev_priv->saveCHICKENBIT, DSPCHICKENBIT);
+
+	/* Make sure VGA plane is off. it initializes to on after reset!*/
+	PSB_WVDC32(0x80000000, VGACNTRL);
+
+	/* set the plls */
+	PSB_WVDC32(dev_priv->saveFPA0, MRST_FPA0);
+	PSB_WVDC32(dev_priv->saveFPA1, MRST_FPA1);
+
+	/* Actually enable it */
+	PSB_WVDC32(dev_priv->saveDPLL_A, MRST_DPLL_A);
+	DRM_UDELAY(150);
+
+	/* Restore mode */
+	PSB_WVDC32(dev_priv->saveHTOTAL_A, HTOTAL_A);
+	PSB_WVDC32(dev_priv->saveHBLANK_A, HBLANK_A);
+	PSB_WVDC32(dev_priv->saveHSYNC_A, HSYNC_A);
+	PSB_WVDC32(dev_priv->saveVTOTAL_A, VTOTAL_A);
+	PSB_WVDC32(dev_priv->saveVBLANK_A, VBLANK_A);
+	PSB_WVDC32(dev_priv->saveVSYNC_A, VSYNC_A);
+	PSB_WVDC32(dev_priv->savePIPEASRC, PIPEASRC);
+	PSB_WVDC32(dev_priv->saveBCLRPAT_A, BCLRPAT_A);
+
+	/* Restore performance mode*/
+	PSB_WVDC32(dev_priv->savePERF_MODE, MRST_PERF_MODE);
+
+	/* Enable the pipe*/
+	if (dev_priv->iLVDS_enable)
+		PSB_WVDC32(dev_priv->savePIPEACONF, PIPEACONF);
+
+	/* Set up the plane*/
+	PSB_WVDC32(dev_priv->saveDSPALINOFF, DSPALINOFF);
+	PSB_WVDC32(dev_priv->saveDSPASTRIDE, DSPASTRIDE);
+	PSB_WVDC32(dev_priv->saveDSPATILEOFF, DSPATILEOFF);
+
+	/* Enable the plane */
+	PSB_WVDC32(dev_priv->saveDSPACNTR, DSPACNTR);
+	PSB_WVDC32(dev_priv->saveDSPASURF, DSPASURF);
+
+	/* Enable Cursor A */
+	PSB_WVDC32(dev_priv->saveDSPACURSOR_CTRL, CURACNTR);
+	PSB_WVDC32(dev_priv->saveDSPACURSOR_POS, CURAPOS);
+	PSB_WVDC32(dev_priv->saveDSPACURSOR_BASE, CURABASE);
+
+	/* Restore palette (gamma) */
+	for (i = 0; i < 256; i++)
+		PSB_WVDC32(dev_priv->save_palette_a[i], PALETTE_A + (i << 2));
+
+	if (dev_priv->hdmi_priv)
+		oaktrail_hdmi_restore(dev);
+
+	if (dev_priv->iLVDS_enable) {
+		PSB_WVDC32(dev_priv->saveBLC_PWM_CTL2, BLC_PWM_CTL2);
+		PSB_WVDC32(dev_priv->saveLVDS, LVDS); /*port 61180h*/
+		PSB_WVDC32(dev_priv->savePFIT_CONTROL, PFIT_CONTROL);
+		PSB_WVDC32(dev_priv->savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS);
+		PSB_WVDC32(dev_priv->savePFIT_AUTO_RATIOS, PFIT_AUTO_RATIOS);
+		PSB_WVDC32(dev_priv->saveBLC_PWM_CTL, BLC_PWM_CTL);
+		PSB_WVDC32(dev_priv->savePP_ON_DELAYS, LVDSPP_ON);
+		PSB_WVDC32(dev_priv->savePP_OFF_DELAYS, LVDSPP_OFF);
+		PSB_WVDC32(dev_priv->savePP_DIVISOR, PP_CYCLE);
+		PSB_WVDC32(dev_priv->savePP_CONTROL, PP_CONTROL);
+	}
+
+	/* Wait for cycle delay */
+	do {
+		pp_stat = PSB_RVDC32(PP_STATUS);
+	} while (pp_stat & 0x08000000);
+
+	/* Wait for panel power up */
+	do {
+		pp_stat = PSB_RVDC32(PP_STATUS);
+	} while (pp_stat & 0x10000000);
+
+	/* Restore HW overlay */
+	PSB_WVDC32(dev_priv->saveOV_OVADD, OV_OVADD);
+	PSB_WVDC32(dev_priv->saveOV_OGAMC0, OV_OGAMC0);
+	PSB_WVDC32(dev_priv->saveOV_OGAMC1, OV_OGAMC1);
+	PSB_WVDC32(dev_priv->saveOV_OGAMC2, OV_OGAMC2);
+	PSB_WVDC32(dev_priv->saveOV_OGAMC3, OV_OGAMC3);
+	PSB_WVDC32(dev_priv->saveOV_OGAMC4, OV_OGAMC4);
+	PSB_WVDC32(dev_priv->saveOV_OGAMC5, OV_OGAMC5);
+
+	/* DPST registers */
+	PSB_WVDC32(dev_priv->saveHISTOGRAM_INT_CONTROL_REG,
+						HISTOGRAM_INT_CONTROL);
+	PSB_WVDC32(dev_priv->saveHISTOGRAM_LOGIC_CONTROL_REG,
+						HISTOGRAM_LOGIC_CONTROL);
+	PSB_WVDC32(dev_priv->savePWM_CONTROL_LOGIC, PWM_CONTROL_LOGIC);
+
+	return 0;
+}
+
+/**
+ *	oaktrail_power_down	-	power down the display island
+ *	@dev: our DRM device
+ *
+ *	Power down the display interface of our device
+ */
+static int oaktrail_power_down(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 pwr_mask ;
+	u32 pwr_sts;
+
+	pwr_mask = PSB_PWRGT_DISPLAY_MASK;
+	outl(pwr_mask, dev_priv->ospm_base + PSB_PM_SSC);
+
+	while (true) {
+		pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
+		if ((pwr_sts & pwr_mask) == pwr_mask)
+			break;
+		else
+			udelay(10);
+	}
+	return 0;
+}
+
+/*
+ * oaktrail_power_up
+ *
+ * Restore power to the specified island(s) (powergating)
+ */
+static int oaktrail_power_up(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 pwr_mask = PSB_PWRGT_DISPLAY_MASK;
+	u32 pwr_sts, pwr_cnt;
+
+	pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
+	pwr_cnt &= ~pwr_mask;
+	outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC));
+
+	while (true) {
+		pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
+		if ((pwr_sts & pwr_mask) == 0)
+			break;
+		else
+			udelay(10);
+	}
+	return 0;
+}
+
+
+static void oaktrail_teardown(struct drm_device *dev)
+{
+	oaktrail_hdmi_teardown(dev);
+}
+
+const struct psb_ops oaktrail_chip_ops = {
+	.name = "Oaktrail",
+	.accel_2d = 1,
+	.pipes = 2,
+	.crtcs = 2,
+	.sgx_offset = MRST_SGX_OFFSET,
+
+	.chip_setup = mid_chip_setup,
+	.chip_teardown = oaktrail_teardown,
+	.crtc_helper = &oaktrail_helper_funcs,
+	.crtc_funcs = &psb_intel_crtc_funcs,
+
+	.output_init = oaktrail_output_init,
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+	.backlight_init = oaktrail_backlight_init,
+#endif
+
+	.init_pm = oaktrail_init_pm,
+	.save_regs = oaktrail_save_display_registers,
+	.restore_regs = oaktrail_restore_display_registers,
+	.power_down = oaktrail_power_down,
+	.power_up = oaktrail_power_up,
+
+	.i2c_bus = 1,
+};
diff --git a/drivers/gpu/drm/gma500/oaktrail_hdmi.c b/drivers/gpu/drm/gma500/oaktrail_hdmi.c
new file mode 100644
index 0000000..6f423c0
--- /dev/null
+++ b/drivers/gpu/drm/gma500/oaktrail_hdmi.c
@@ -0,0 +1,852 @@
+/*
+ * Copyright © 2010 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Li Peng <peng.li@intel.com>
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "psb_drv.h"
+
+#define HDMI_READ(reg)		readl(hdmi_dev->regs + (reg))
+#define HDMI_WRITE(reg, val)	writel(val, hdmi_dev->regs + (reg))
+
+#define HDMI_HCR	0x1000
+#define HCR_ENABLE_HDCP		(1 << 5)
+#define HCR_ENABLE_AUDIO	(1 << 2)
+#define HCR_ENABLE_PIXEL	(1 << 1)
+#define HCR_ENABLE_TMDS		(1 << 0)
+
+#define HDMI_HICR	0x1004
+#define HDMI_HSR	0x1008
+#define HDMI_HISR	0x100C
+#define HDMI_DETECT_HDP		(1 << 0)
+
+#define HDMI_VIDEO_REG	0x3000
+#define HDMI_UNIT_EN		(1 << 7)
+#define HDMI_MODE_OUTPUT	(1 << 0)
+#define HDMI_HBLANK_A	0x3100
+
+#define HDMI_AUDIO_CTRL	0x4000
+#define HDMI_ENABLE_AUDIO	(1 << 0)
+
+#define PCH_HTOTAL_B	0x3100
+#define PCH_HBLANK_B	0x3104
+#define PCH_HSYNC_B	0x3108
+#define PCH_VTOTAL_B	0x310C
+#define PCH_VBLANK_B	0x3110
+#define PCH_VSYNC_B	0x3114
+#define PCH_PIPEBSRC	0x311C
+
+#define PCH_PIPEB_DSL	0x3800
+#define PCH_PIPEB_SLC	0x3804
+#define PCH_PIPEBCONF	0x3808
+#define PCH_PIPEBSTAT	0x3824
+
+#define CDVO_DFT	0x5000
+#define CDVO_SLEWRATE	0x5004
+#define CDVO_STRENGTH	0x5008
+#define CDVO_RCOMP	0x500C
+
+#define DPLL_CTRL       0x6000
+#define DPLL_PDIV_SHIFT		16
+#define DPLL_PDIV_MASK		(0xf << 16)
+#define DPLL_PWRDN		(1 << 4)
+#define DPLL_RESET		(1 << 3)
+#define DPLL_FASTEN		(1 << 2)
+#define DPLL_ENSTAT		(1 << 1)
+#define DPLL_DITHEN		(1 << 0)
+
+#define DPLL_DIV_CTRL   0x6004
+#define DPLL_CLKF_MASK		0xffffffc0
+#define DPLL_CLKR_MASK		(0x3f)
+
+#define DPLL_CLK_ENABLE 0x6008
+#define DPLL_EN_DISP		(1 << 31)
+#define DPLL_SEL_HDMI		(1 << 8)
+#define DPLL_EN_HDMI		(1 << 1)
+#define DPLL_EN_VGA		(1 << 0)
+
+#define DPLL_ADJUST     0x600C
+#define DPLL_STATUS     0x6010
+#define DPLL_UPDATE     0x6014
+#define DPLL_DFT        0x6020
+
+struct intel_range {
+	int	min, max;
+};
+
+struct oaktrail_hdmi_limit {
+	struct intel_range vco, np, nr, nf;
+};
+
+struct oaktrail_hdmi_clock {
+	int np;
+	int nr;
+	int nf;
+	int dot;
+};
+
+#define VCO_MIN		320000
+#define VCO_MAX		1650000
+#define	NP_MIN		1
+#define	NP_MAX		15
+#define	NR_MIN		1
+#define	NR_MAX		64
+#define NF_MIN		2
+#define NF_MAX		4095
+
+static const struct oaktrail_hdmi_limit oaktrail_hdmi_limit = {
+	.vco = { .min = VCO_MIN,		.max = VCO_MAX },
+	.np  = { .min = NP_MIN,			.max = NP_MAX  },
+	.nr  = { .min = NR_MIN,			.max = NR_MAX  },
+	.nf  = { .min = NF_MIN,			.max = NF_MAX  },
+};
+
+static void wait_for_vblank(struct drm_device *dev)
+{
+	/* FIXME: Can we do this as a sleep ? */
+	/* Wait for 20ms, i.e. one cycle at 50hz. */
+	mdelay(20);
+}
+
+static void scu_busy_loop(void *scu_base)
+{
+	u32 status = 0;
+	u32 loop_count = 0;
+
+	status = readl(scu_base + 0x04);
+	while (status & 1) {
+		udelay(1); /* scu processing time is in few u secods */
+		status = readl(scu_base + 0x04);
+		loop_count++;
+		/* break if scu doesn't reset busy bit after huge retry */
+		if (loop_count > 1000) {
+			DRM_DEBUG_KMS("SCU IPC timed out");
+			return;
+		}
+	}
+}
+
+static void oaktrail_hdmi_reset(struct drm_device *dev)
+{
+	void *base;
+	/* FIXME: at least make these defines */
+	unsigned int scu_ipc_mmio = 0xff11c000;
+	int scu_len = 1024;
+
+	base = ioremap((resource_size_t)scu_ipc_mmio, scu_len);
+	if (base == NULL) {
+		DRM_ERROR("failed to map SCU mmio\n");
+		return;
+	}
+
+	/* scu ipc: assert hdmi controller reset */
+	writel(0xff11d118, base + 0x0c);
+	writel(0x7fffffdf, base + 0x80);
+	writel(0x42005, base + 0x0);
+	scu_busy_loop(base);
+
+	/* scu ipc: de-assert hdmi controller reset */
+	writel(0xff11d118, base + 0x0c);
+	writel(0x7fffffff, base + 0x80);
+	writel(0x42005, base + 0x0);
+	scu_busy_loop(base);
+
+	iounmap(base);
+}
+
+static void oaktrail_hdmi_audio_enable(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
+
+	HDMI_WRITE(HDMI_HCR, 0x67);
+	HDMI_READ(HDMI_HCR);
+
+	HDMI_WRITE(0x51a8, 0x10);
+	HDMI_READ(0x51a8);
+
+	HDMI_WRITE(HDMI_AUDIO_CTRL, 0x1);
+	HDMI_READ(HDMI_AUDIO_CTRL);
+}
+
+static void oaktrail_hdmi_audio_disable(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
+
+	HDMI_WRITE(0x51a8, 0x0);
+	HDMI_READ(0x51a8);
+
+	HDMI_WRITE(HDMI_AUDIO_CTRL, 0x0);
+	HDMI_READ(HDMI_AUDIO_CTRL);
+
+	HDMI_WRITE(HDMI_HCR, 0x47);
+	HDMI_READ(HDMI_HCR);
+}
+
+void oaktrail_crtc_hdmi_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct drm_device *dev = crtc->dev;
+	u32 temp;
+
+	switch (mode) {
+	case DRM_MODE_DPMS_OFF:
+		/* Disable VGACNTRL */
+		REG_WRITE(VGACNTRL, 0x80000000);
+
+		/* Disable plane */
+		temp = REG_READ(DSPBCNTR);
+		if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+			REG_WRITE(DSPBCNTR, temp & ~DISPLAY_PLANE_ENABLE);
+			REG_READ(DSPBCNTR);
+			/* Flush the plane changes */
+			REG_WRITE(DSPBSURF, REG_READ(DSPBSURF));
+			REG_READ(DSPBSURF);
+		}
+
+		/* Disable pipe B */
+		temp = REG_READ(PIPEBCONF);
+		if ((temp & PIPEACONF_ENABLE) != 0) {
+			REG_WRITE(PIPEBCONF, temp & ~PIPEACONF_ENABLE);
+			REG_READ(PIPEBCONF);
+		}
+
+		/* Disable LNW Pipes, etc */
+		temp = REG_READ(PCH_PIPEBCONF);
+		if ((temp & PIPEACONF_ENABLE) != 0) {
+			REG_WRITE(PCH_PIPEBCONF, temp & ~PIPEACONF_ENABLE);
+			REG_READ(PCH_PIPEBCONF);
+		}
+		/* wait for pipe off */
+		udelay(150);
+		/* Disable dpll */
+		temp = REG_READ(DPLL_CTRL);
+		if ((temp & DPLL_PWRDN) == 0) {
+			REG_WRITE(DPLL_CTRL, temp | (DPLL_PWRDN | DPLL_RESET));
+			REG_WRITE(DPLL_STATUS, 0x1);
+		}
+		/* wait for dpll off */
+		udelay(150);
+		break;
+	case DRM_MODE_DPMS_ON:
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+		/* Enable dpll */
+		temp = REG_READ(DPLL_CTRL);
+		if ((temp & DPLL_PWRDN) != 0) {
+			REG_WRITE(DPLL_CTRL, temp & ~(DPLL_PWRDN | DPLL_RESET));
+			temp = REG_READ(DPLL_CLK_ENABLE);
+			REG_WRITE(DPLL_CLK_ENABLE, temp | DPLL_EN_DISP | DPLL_SEL_HDMI | DPLL_EN_HDMI);
+			REG_READ(DPLL_CLK_ENABLE);
+		}
+		/* wait for dpll warm up */
+		udelay(150);
+
+		/* Enable pipe B */
+		temp = REG_READ(PIPEBCONF);
+		if ((temp & PIPEACONF_ENABLE) == 0) {
+			REG_WRITE(PIPEBCONF, temp | PIPEACONF_ENABLE);
+			REG_READ(PIPEBCONF);
+		}
+
+		/* Enable LNW Pipe B */
+		temp = REG_READ(PCH_PIPEBCONF);
+		if ((temp & PIPEACONF_ENABLE) == 0) {
+			REG_WRITE(PCH_PIPEBCONF, temp | PIPEACONF_ENABLE);
+			REG_READ(PCH_PIPEBCONF);
+		}
+		wait_for_vblank(dev);
+
+		/* Enable plane */
+		temp = REG_READ(DSPBCNTR);
+		if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+			REG_WRITE(DSPBCNTR, temp | DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			REG_WRITE(DSPBSURF, REG_READ(DSPBSURF));
+			REG_READ(DSPBSURF);
+		}
+		psb_intel_crtc_load_lut(crtc);
+	}
+	/* DSPARB */
+	REG_WRITE(DSPARB, 0x00003fbf);
+	/* FW1 */
+	REG_WRITE(0x70034, 0x3f880a0a);
+	/* FW2 */
+	REG_WRITE(0x70038, 0x0b060808);
+	/* FW4 */
+	REG_WRITE(0x70050, 0x08030404);
+	/* FW5 */
+	REG_WRITE(0x70054, 0x04040404);
+	/* LNC Chicken Bits */
+	REG_WRITE(0x70400, 0x4000);
+}
+
+
+static void oaktrail_hdmi_dpms(struct drm_encoder *encoder, int mode)
+{
+	static int dpms_mode = -1;
+
+	struct drm_device *dev = encoder->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
+	u32 temp;
+
+	if (dpms_mode == mode)
+		return;
+
+	if (mode != DRM_MODE_DPMS_ON)
+		temp = 0x0;
+	else
+		temp = 0x99;
+
+	dpms_mode = mode;
+	HDMI_WRITE(HDMI_VIDEO_REG, temp);
+}
+
+static unsigned int htotal_calculate(struct drm_display_mode *mode)
+{
+	u32 htotal, new_crtc_htotal;
+
+	htotal = (mode->crtc_hdisplay - 1) | ((mode->crtc_htotal - 1) << 16);
+
+	/*
+	 * 1024 x 768  new_crtc_htotal = 0x1024;
+	 * 1280 x 1024 new_crtc_htotal = 0x0c34;
+	 */
+	new_crtc_htotal = (mode->crtc_htotal - 1) * 200 * 1000 / mode->clock;
+
+	return (mode->crtc_hdisplay - 1) | (new_crtc_htotal << 16);
+}
+
+static void oaktrail_hdmi_find_dpll(struct drm_crtc *crtc, int target,
+				int refclk, struct oaktrail_hdmi_clock *best_clock)
+{
+	int np_min, np_max, nr_min, nr_max;
+	int np, nr, nf;
+
+	np_min = DIV_ROUND_UP(oaktrail_hdmi_limit.vco.min, target * 10);
+	np_max = oaktrail_hdmi_limit.vco.max / (target * 10);
+	if (np_min < oaktrail_hdmi_limit.np.min)
+		np_min = oaktrail_hdmi_limit.np.min;
+	if (np_max > oaktrail_hdmi_limit.np.max)
+		np_max = oaktrail_hdmi_limit.np.max;
+
+	nr_min = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_max));
+	nr_max = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_min));
+	if (nr_min < oaktrail_hdmi_limit.nr.min)
+		nr_min = oaktrail_hdmi_limit.nr.min;
+	if (nr_max > oaktrail_hdmi_limit.nr.max)
+		nr_max = oaktrail_hdmi_limit.nr.max;
+
+	np = DIV_ROUND_UP((refclk * 1000), (target * 10 * nr_max));
+	nr = DIV_ROUND_UP((refclk * 1000), (target * 10 * np));
+	nf = DIV_ROUND_CLOSEST((target * 10 * np * nr), refclk);
+	DRM_DEBUG_KMS("np, nr, nf %d %d %d\n", np, nr, nf);
+
+	/*
+	 * 1024 x 768  np = 1; nr = 0x26; nf = 0x0fd8000;
+	 * 1280 x 1024 np = 1; nr = 0x17; nf = 0x1034000;
+	 */
+	best_clock->np = np;
+	best_clock->nr = nr - 1;
+	best_clock->nf = (nf << 14);
+}
+
+int oaktrail_crtc_hdmi_mode_set(struct drm_crtc *crtc,
+			    struct drm_display_mode *mode,
+			    struct drm_display_mode *adjusted_mode,
+			    int x, int y,
+			    struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
+	int pipe = 1;
+	int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
+	int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
+	int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
+	int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
+	int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
+	int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
+	int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
+	int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
+	int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
+	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+	int refclk;
+	struct oaktrail_hdmi_clock clock;
+	u32 dspcntr, pipeconf, dpll, temp;
+	int dspcntr_reg = DSPBCNTR;
+
+	/* Disable the VGA plane that we never use */
+	REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+
+	/* XXX: Disable the panel fitter if it was on our pipe */
+
+	/* Disable dpll if necessary */
+	dpll = REG_READ(DPLL_CTRL);
+	if ((dpll & DPLL_PWRDN) == 0) {
+		REG_WRITE(DPLL_CTRL, dpll | (DPLL_PWRDN | DPLL_RESET));
+		REG_WRITE(DPLL_DIV_CTRL, 0x00000000);
+		REG_WRITE(DPLL_STATUS, 0x1);
+	}
+	udelay(150);
+
+	/* reset controller: FIXME - can we sort out the ioremap mess ? */
+	iounmap(hdmi_dev->regs);
+	oaktrail_hdmi_reset(dev);
+
+	/* program and enable dpll */
+	refclk = 25000;
+	oaktrail_hdmi_find_dpll(crtc, adjusted_mode->clock, refclk, &clock);
+
+	/* Setting DPLL */
+	dpll = REG_READ(DPLL_CTRL);
+	dpll &= ~DPLL_PDIV_MASK;
+	dpll &= ~(DPLL_PWRDN | DPLL_RESET);
+	REG_WRITE(DPLL_CTRL, 0x00000008);
+	REG_WRITE(DPLL_DIV_CTRL, ((clock.nf << 6) | clock.nr));
+	REG_WRITE(DPLL_ADJUST, ((clock.nf >> 14) - 1));
+	REG_WRITE(DPLL_CTRL, (dpll | (clock.np << DPLL_PDIV_SHIFT) | DPLL_ENSTAT | DPLL_DITHEN));
+	REG_WRITE(DPLL_UPDATE, 0x80000000);
+	REG_WRITE(DPLL_CLK_ENABLE, 0x80050102);
+	udelay(150);
+
+	hdmi_dev->regs = ioremap(hdmi_dev->mmio, hdmi_dev->mmio_len);
+	if (hdmi_dev->regs == NULL) {
+		DRM_ERROR("failed to do hdmi mmio mapping\n");
+		return -ENOMEM;
+	}
+
+	/* configure HDMI */
+	HDMI_WRITE(0x1004, 0x1fd);
+	HDMI_WRITE(0x2000, 0x1);
+	HDMI_WRITE(0x2008, 0x0);
+	HDMI_WRITE(0x3130, 0x8);
+	HDMI_WRITE(0x101c, 0x1800810);
+
+	temp = htotal_calculate(adjusted_mode);
+	REG_WRITE(htot_reg, temp);
+	REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16));
+	REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16));
+	REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16));
+	REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16));
+	REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16));
+	REG_WRITE(pipesrc_reg,
+		((mode->crtc_hdisplay - 1) << 16) |  (mode->crtc_vdisplay - 1));
+
+	REG_WRITE(PCH_HTOTAL_B, (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16));
+	REG_WRITE(PCH_HBLANK_B, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16));
+	REG_WRITE(PCH_HSYNC_B, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16));
+	REG_WRITE(PCH_VTOTAL_B, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16));
+	REG_WRITE(PCH_VBLANK_B, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16));
+	REG_WRITE(PCH_VSYNC_B, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16));
+	REG_WRITE(PCH_PIPEBSRC,
+		((mode->crtc_hdisplay - 1) << 16) |  (mode->crtc_vdisplay - 1));
+
+	temp = adjusted_mode->crtc_hblank_end - adjusted_mode->crtc_hblank_start;
+	HDMI_WRITE(HDMI_HBLANK_A, ((adjusted_mode->crtc_hdisplay - 1) << 16) |  temp);
+
+	REG_WRITE(dspsize_reg,
+			((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
+	REG_WRITE(dsppos_reg, 0);
+
+	/* Flush the plane changes */
+	{
+		struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+		crtc_funcs->mode_set_base(crtc, x, y, old_fb);
+	}
+
+	/* Set up the display plane register */
+	dspcntr = REG_READ(dspcntr_reg);
+	dspcntr |= DISPPLANE_GAMMA_ENABLE;
+	dspcntr |= DISPPLANE_SEL_PIPE_B;
+	dspcntr |= DISPLAY_PLANE_ENABLE;
+
+	/* setup pipeconf */
+	pipeconf = REG_READ(pipeconf_reg);
+	pipeconf |= PIPEACONF_ENABLE;
+
+	REG_WRITE(pipeconf_reg, pipeconf);
+	REG_READ(pipeconf_reg);
+
+	REG_WRITE(PCH_PIPEBCONF, pipeconf);
+	REG_READ(PCH_PIPEBCONF);
+	wait_for_vblank(dev);
+
+	REG_WRITE(dspcntr_reg, dspcntr);
+	wait_for_vblank(dev);
+
+	return 0;
+}
+
+static int oaktrail_hdmi_mode_valid(struct drm_connector *connector,
+				struct drm_display_mode *mode)
+{
+	if (mode->clock > 165000)
+		return MODE_CLOCK_HIGH;
+	if (mode->clock < 20000)
+		return MODE_CLOCK_LOW;
+
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	return MODE_OK;
+}
+
+static bool oaktrail_hdmi_mode_fixup(struct drm_encoder *encoder,
+				 struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static enum drm_connector_status
+oaktrail_hdmi_detect(struct drm_connector *connector, bool force)
+{
+	enum drm_connector_status status;
+	struct drm_device *dev = connector->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
+	u32 temp;
+
+	temp = HDMI_READ(HDMI_HSR);
+	DRM_DEBUG_KMS("HDMI_HSR %x\n", temp);
+
+	if ((temp & HDMI_DETECT_HDP) != 0)
+		status = connector_status_connected;
+	else
+		status = connector_status_disconnected;
+
+	return status;
+}
+
+static const unsigned char raw_edid[] = {
+	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x10, 0xac, 0x2f, 0xa0,
+	0x53, 0x55, 0x33, 0x30, 0x16, 0x13, 0x01, 0x03, 0x0e, 0x3a, 0x24, 0x78,
+	0xea, 0xe9, 0xf5, 0xac, 0x51, 0x30, 0xb4, 0x25, 0x11, 0x50, 0x54, 0xa5,
+	0x4b, 0x00, 0x81, 0x80, 0xa9, 0x40, 0x71, 0x4f, 0xb3, 0x00, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x28, 0x3c, 0x80, 0xa0, 0x70, 0xb0,
+	0x23, 0x40, 0x30, 0x20, 0x36, 0x00, 0x46, 0x6c, 0x21, 0x00, 0x00, 0x1a,
+	0x00, 0x00, 0x00, 0xff, 0x00, 0x47, 0x4e, 0x37, 0x32, 0x31, 0x39, 0x35,
+	0x52, 0x30, 0x33, 0x55, 0x53, 0x0a, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x44,
+	0x45, 0x4c, 0x4c, 0x20, 0x32, 0x37, 0x30, 0x39, 0x57, 0x0a, 0x20, 0x20,
+	0x00, 0x00, 0x00, 0xfd, 0x00, 0x38, 0x4c, 0x1e, 0x53, 0x11, 0x00, 0x0a,
+	0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x8d
+};
+
+static int oaktrail_hdmi_get_modes(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct i2c_adapter *i2c_adap;
+	struct edid *edid;
+	struct drm_display_mode *mode, *t;
+	int i = 0, ret = 0;
+
+	i2c_adap = i2c_get_adapter(3);
+	if (i2c_adap == NULL) {
+		DRM_ERROR("No ddc adapter available!\n");
+		edid = (struct edid *)raw_edid;
+	} else {
+		edid = (struct edid *)raw_edid;
+		/* FIXME ? edid = drm_get_edid(connector, i2c_adap); */
+	}
+
+	if (edid) {
+		drm_mode_connector_update_edid_property(connector, edid);
+		ret = drm_add_edid_modes(connector, edid);
+		connector->display_info.raw_edid = NULL;
+	}
+
+	/*
+	 * prune modes that require frame buffer bigger than stolen mem
+	 */
+	list_for_each_entry_safe(mode, t, &connector->probed_modes, head) {
+		if ((mode->hdisplay * mode->vdisplay * 4) >= dev_priv->vram_stolen_size) {
+			i++;
+			drm_mode_remove(connector, mode);
+		}
+	}
+	return ret - i;
+}
+
+static void oaktrail_hdmi_mode_set(struct drm_encoder *encoder,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+
+	oaktrail_hdmi_audio_enable(dev);
+	return;
+}
+
+static void oaktrail_hdmi_destroy(struct drm_connector *connector)
+{
+	return;
+}
+
+static const struct drm_encoder_helper_funcs oaktrail_hdmi_helper_funcs = {
+	.dpms = oaktrail_hdmi_dpms,
+	.mode_fixup = oaktrail_hdmi_mode_fixup,
+	.prepare = psb_intel_encoder_prepare,
+	.mode_set = oaktrail_hdmi_mode_set,
+	.commit = psb_intel_encoder_commit,
+};
+
+static const struct drm_connector_helper_funcs
+					oaktrail_hdmi_connector_helper_funcs = {
+	.get_modes = oaktrail_hdmi_get_modes,
+	.mode_valid = oaktrail_hdmi_mode_valid,
+	.best_encoder = psb_intel_best_encoder,
+};
+
+static const struct drm_connector_funcs oaktrail_hdmi_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.detect = oaktrail_hdmi_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = oaktrail_hdmi_destroy,
+};
+
+static void oaktrail_hdmi_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs oaktrail_hdmi_enc_funcs = {
+	.destroy = oaktrail_hdmi_enc_destroy,
+};
+
+void oaktrail_hdmi_init(struct drm_device *dev,
+					struct psb_intel_mode_device *mode_dev)
+{
+	struct psb_intel_output *psb_intel_output;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+
+	psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL);
+	if (!psb_intel_output)
+		return;
+
+	psb_intel_output->mode_dev = mode_dev;
+	connector = &psb_intel_output->base;
+	encoder = &psb_intel_output->enc;
+	drm_connector_init(dev, &psb_intel_output->base,
+			   &oaktrail_hdmi_connector_funcs,
+			   DRM_MODE_CONNECTOR_DVID);
+
+	drm_encoder_init(dev, &psb_intel_output->enc,
+			 &oaktrail_hdmi_enc_funcs,
+			 DRM_MODE_ENCODER_TMDS);
+
+	drm_mode_connector_attach_encoder(&psb_intel_output->base,
+					  &psb_intel_output->enc);
+
+	psb_intel_output->type = INTEL_OUTPUT_HDMI;
+	drm_encoder_helper_add(encoder, &oaktrail_hdmi_helper_funcs);
+	drm_connector_helper_add(connector, &oaktrail_hdmi_connector_helper_funcs);
+
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+	drm_sysfs_connector_add(connector);
+
+	return;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(hdmi_ids) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080d) },
+	{}
+};
+
+void oaktrail_hdmi_setup(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct pci_dev *pdev;
+	struct oaktrail_hdmi_dev *hdmi_dev;
+	int ret;
+
+	pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x080d, NULL);
+	if (!pdev)
+		return;
+
+	hdmi_dev = kzalloc(sizeof(struct oaktrail_hdmi_dev), GFP_KERNEL);
+	if (!hdmi_dev) {
+		dev_err(dev->dev, "failed to allocate memory\n");
+		goto out;
+	}
+
+
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_err(dev->dev, "failed to enable hdmi controller\n");
+		goto free;
+	}
+
+	hdmi_dev->mmio = pci_resource_start(pdev, 0);
+	hdmi_dev->mmio_len = pci_resource_len(pdev, 0);
+	hdmi_dev->regs = ioremap(hdmi_dev->mmio, hdmi_dev->mmio_len);
+	if (!hdmi_dev->regs) {
+		dev_err(dev->dev, "failed to map hdmi mmio\n");
+		goto free;
+	}
+
+	hdmi_dev->dev = pdev;
+	pci_set_drvdata(pdev, hdmi_dev);
+
+	/* Initialize i2c controller */
+	ret = oaktrail_hdmi_i2c_init(hdmi_dev->dev);
+	if (ret)
+		dev_err(dev->dev, "HDMI I2C initialization failed\n");
+
+	dev_priv->hdmi_priv = hdmi_dev;
+	oaktrail_hdmi_audio_disable(dev);
+	return;
+
+free:
+	kfree(hdmi_dev);
+out:
+	return;
+}
+
+void oaktrail_hdmi_teardown(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
+	struct pci_dev *pdev;
+
+	if (hdmi_dev) {
+		pdev = hdmi_dev->dev;
+		pci_set_drvdata(pdev, NULL);
+		oaktrail_hdmi_i2c_exit(pdev);
+		iounmap(hdmi_dev->regs);
+		kfree(hdmi_dev);
+		pci_dev_put(pdev);
+	}
+}
+
+/* save HDMI register state */
+void oaktrail_hdmi_save(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
+	int i;
+
+	/* dpll */
+	hdmi_dev->saveDPLL_CTRL = PSB_RVDC32(DPLL_CTRL);
+	hdmi_dev->saveDPLL_DIV_CTRL = PSB_RVDC32(DPLL_DIV_CTRL);
+	hdmi_dev->saveDPLL_ADJUST = PSB_RVDC32(DPLL_ADJUST);
+	hdmi_dev->saveDPLL_UPDATE = PSB_RVDC32(DPLL_UPDATE);
+	hdmi_dev->saveDPLL_CLK_ENABLE = PSB_RVDC32(DPLL_CLK_ENABLE);
+
+	/* pipe B */
+	dev_priv->savePIPEBCONF = PSB_RVDC32(PIPEBCONF);
+	dev_priv->savePIPEBSRC  = PSB_RVDC32(PIPEBSRC);
+	dev_priv->saveHTOTAL_B  = PSB_RVDC32(HTOTAL_B);
+	dev_priv->saveHBLANK_B  = PSB_RVDC32(HBLANK_B);
+	dev_priv->saveHSYNC_B   = PSB_RVDC32(HSYNC_B);
+	dev_priv->saveVTOTAL_B  = PSB_RVDC32(VTOTAL_B);
+	dev_priv->saveVBLANK_B  = PSB_RVDC32(VBLANK_B);
+	dev_priv->saveVSYNC_B   = PSB_RVDC32(VSYNC_B);
+
+	hdmi_dev->savePCH_PIPEBCONF = PSB_RVDC32(PCH_PIPEBCONF);
+	hdmi_dev->savePCH_PIPEBSRC = PSB_RVDC32(PCH_PIPEBSRC);
+	hdmi_dev->savePCH_HTOTAL_B = PSB_RVDC32(PCH_HTOTAL_B);
+	hdmi_dev->savePCH_HBLANK_B = PSB_RVDC32(PCH_HBLANK_B);
+	hdmi_dev->savePCH_HSYNC_B  = PSB_RVDC32(PCH_HSYNC_B);
+	hdmi_dev->savePCH_VTOTAL_B = PSB_RVDC32(PCH_VTOTAL_B);
+	hdmi_dev->savePCH_VBLANK_B = PSB_RVDC32(PCH_VBLANK_B);
+	hdmi_dev->savePCH_VSYNC_B  = PSB_RVDC32(PCH_VSYNC_B);
+
+	/* plane */
+	dev_priv->saveDSPBCNTR = PSB_RVDC32(DSPBCNTR);
+	dev_priv->saveDSPBSTRIDE = PSB_RVDC32(DSPBSTRIDE);
+	dev_priv->saveDSPBADDR = PSB_RVDC32(DSPBBASE);
+	dev_priv->saveDSPBSURF = PSB_RVDC32(DSPBSURF);
+	dev_priv->saveDSPBLINOFF = PSB_RVDC32(DSPBLINOFF);
+	dev_priv->saveDSPBTILEOFF = PSB_RVDC32(DSPBTILEOFF);
+
+	/* cursor B */
+	dev_priv->saveDSPBCURSOR_CTRL = PSB_RVDC32(CURBCNTR);
+	dev_priv->saveDSPBCURSOR_BASE = PSB_RVDC32(CURBBASE);
+	dev_priv->saveDSPBCURSOR_POS = PSB_RVDC32(CURBPOS);
+
+	/* save palette */
+	for (i = 0; i < 256; i++)
+		dev_priv->save_palette_b[i] = PSB_RVDC32(PALETTE_B + (i << 2));
+}
+
+/* restore HDMI register state */
+void oaktrail_hdmi_restore(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
+	int i;
+
+	/* dpll */
+	PSB_WVDC32(hdmi_dev->saveDPLL_CTRL, DPLL_CTRL);
+	PSB_WVDC32(hdmi_dev->saveDPLL_DIV_CTRL, DPLL_DIV_CTRL);
+	PSB_WVDC32(hdmi_dev->saveDPLL_ADJUST, DPLL_ADJUST);
+	PSB_WVDC32(hdmi_dev->saveDPLL_UPDATE, DPLL_UPDATE);
+	PSB_WVDC32(hdmi_dev->saveDPLL_CLK_ENABLE, DPLL_CLK_ENABLE);
+	DRM_UDELAY(150);
+
+	/* pipe */
+	PSB_WVDC32(dev_priv->savePIPEBSRC, PIPEBSRC);
+	PSB_WVDC32(dev_priv->saveHTOTAL_B, HTOTAL_B);
+	PSB_WVDC32(dev_priv->saveHBLANK_B, HBLANK_B);
+	PSB_WVDC32(dev_priv->saveHSYNC_B,  HSYNC_B);
+	PSB_WVDC32(dev_priv->saveVTOTAL_B, VTOTAL_B);
+	PSB_WVDC32(dev_priv->saveVBLANK_B, VBLANK_B);
+	PSB_WVDC32(dev_priv->saveVSYNC_B,  VSYNC_B);
+
+	PSB_WVDC32(hdmi_dev->savePCH_PIPEBSRC, PCH_PIPEBSRC);
+	PSB_WVDC32(hdmi_dev->savePCH_HTOTAL_B, PCH_HTOTAL_B);
+	PSB_WVDC32(hdmi_dev->savePCH_HBLANK_B, PCH_HBLANK_B);
+	PSB_WVDC32(hdmi_dev->savePCH_HSYNC_B,  PCH_HSYNC_B);
+	PSB_WVDC32(hdmi_dev->savePCH_VTOTAL_B, PCH_VTOTAL_B);
+	PSB_WVDC32(hdmi_dev->savePCH_VBLANK_B, PCH_VBLANK_B);
+	PSB_WVDC32(hdmi_dev->savePCH_VSYNC_B,  PCH_VSYNC_B);
+
+	PSB_WVDC32(dev_priv->savePIPEBCONF, PIPEBCONF);
+	PSB_WVDC32(hdmi_dev->savePCH_PIPEBCONF, PCH_PIPEBCONF);
+
+	/* plane */
+	PSB_WVDC32(dev_priv->saveDSPBLINOFF, DSPBLINOFF);
+	PSB_WVDC32(dev_priv->saveDSPBSTRIDE, DSPBSTRIDE);
+	PSB_WVDC32(dev_priv->saveDSPBTILEOFF, DSPBTILEOFF);
+	PSB_WVDC32(dev_priv->saveDSPBCNTR, DSPBCNTR);
+	PSB_WVDC32(dev_priv->saveDSPBSURF, DSPBSURF);
+
+	/* cursor B */
+	PSB_WVDC32(dev_priv->saveDSPBCURSOR_CTRL, CURBCNTR);
+	PSB_WVDC32(dev_priv->saveDSPBCURSOR_POS, CURBPOS);
+	PSB_WVDC32(dev_priv->saveDSPBCURSOR_BASE, CURBBASE);
+
+	/* restore palette */
+	for (i = 0; i < 256; i++)
+		PSB_WVDC32(dev_priv->save_palette_b[i], PALETTE_B + (i << 2));
+}
diff --git a/drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c b/drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c
new file mode 100644
index 0000000..d454e6f
--- /dev/null
+++ b/drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c
@@ -0,0 +1,327 @@
+/*
+ * Copyright © 2010 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Li Peng <peng.li@intel.com>
+ */
+
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include "psb_drv.h"
+
+#define HDMI_READ(reg)		readl(hdmi_dev->regs + (reg))
+#define HDMI_WRITE(reg, val)	writel(val, hdmi_dev->regs + (reg))
+
+#define HDMI_HCR	0x1000
+#define HCR_DETECT_HDP		(1 << 6)
+#define HCR_ENABLE_HDCP		(1 << 5)
+#define HCR_ENABLE_AUDIO	(1 << 2)
+#define HCR_ENABLE_PIXEL	(1 << 1)
+#define HCR_ENABLE_TMDS		(1 << 0)
+#define HDMI_HICR	0x1004
+#define HDMI_INTR_I2C_ERROR	(1 << 4)
+#define HDMI_INTR_I2C_FULL	(1 << 3)
+#define HDMI_INTR_I2C_DONE	(1 << 2)
+#define HDMI_INTR_HPD		(1 << 0)
+#define HDMI_HSR	0x1008
+#define HDMI_HISR	0x100C
+#define HDMI_HI2CRDB0	0x1200
+#define HDMI_HI2CHCR	0x1240
+#define HI2C_HDCP_WRITE		(0 << 2)
+#define HI2C_HDCP_RI_READ	(1 << 2)
+#define HI2C_HDCP_READ		(2 << 2)
+#define HI2C_EDID_READ		(3 << 2)
+#define HI2C_READ_CONTINUE	(1 << 1)
+#define HI2C_ENABLE_TRANSACTION	(1 << 0)
+
+#define HDMI_ICRH	0x1100
+#define HDMI_HI2CTDR0	0x1244
+#define HDMI_HI2CTDR1	0x1248
+
+#define I2C_STAT_INIT		0
+#define I2C_READ_DONE		1
+#define I2C_TRANSACTION_DONE	2
+
+struct hdmi_i2c_dev {
+	struct i2c_adapter *adap;
+	struct mutex i2c_lock;
+	struct completion complete;
+	int status;
+	struct i2c_msg *msg;
+	int buf_offset;
+};
+
+static void hdmi_i2c_irq_enable(struct oaktrail_hdmi_dev *hdmi_dev)
+{
+	u32 temp;
+
+	temp = HDMI_READ(HDMI_HICR);
+	temp |= (HDMI_INTR_I2C_ERROR | HDMI_INTR_I2C_FULL | HDMI_INTR_I2C_DONE);
+	HDMI_WRITE(HDMI_HICR, temp);
+	HDMI_READ(HDMI_HICR);
+}
+
+static void hdmi_i2c_irq_disable(struct oaktrail_hdmi_dev *hdmi_dev)
+{
+	HDMI_WRITE(HDMI_HICR, 0x0);
+	HDMI_READ(HDMI_HICR);
+}
+
+static int xfer_read(struct i2c_adapter *adap, struct i2c_msg *pmsg)
+{
+	struct oaktrail_hdmi_dev *hdmi_dev = i2c_get_adapdata(adap);
+	struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev;
+	u32 temp;
+
+	i2c_dev->status = I2C_STAT_INIT;
+	i2c_dev->msg = pmsg;
+	i2c_dev->buf_offset = 0;
+	INIT_COMPLETION(i2c_dev->complete);
+
+	/* Enable I2C transaction */
+	temp = ((pmsg->len) << 20) | HI2C_EDID_READ | HI2C_ENABLE_TRANSACTION;
+	HDMI_WRITE(HDMI_HI2CHCR, temp);
+	HDMI_READ(HDMI_HI2CHCR);
+
+	while (i2c_dev->status != I2C_TRANSACTION_DONE)
+		wait_for_completion_interruptible_timeout(&i2c_dev->complete,
+								10 * HZ);
+
+	return 0;
+}
+
+static int xfer_write(struct i2c_adapter *adap, struct i2c_msg *pmsg)
+{
+	/*
+	 * XXX: i2c write seems isn't useful for EDID probe, don't do anything
+	 */
+	return 0;
+}
+
+static int oaktrail_hdmi_i2c_access(struct i2c_adapter *adap,
+				struct i2c_msg *pmsg,
+				int num)
+{
+	struct oaktrail_hdmi_dev *hdmi_dev = i2c_get_adapdata(adap);
+	struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev;
+	int i, err = 0;
+
+	mutex_lock(&i2c_dev->i2c_lock);
+
+	/* Enable i2c unit */
+	HDMI_WRITE(HDMI_ICRH, 0x00008760);
+
+	/* Enable irq */
+	hdmi_i2c_irq_enable(hdmi_dev);
+	for (i = 0; i < num; i++) {
+		if (pmsg->len && pmsg->buf) {
+			if (pmsg->flags & I2C_M_RD)
+				err = xfer_read(adap, pmsg);
+			else
+				err = xfer_write(adap, pmsg);
+		}
+		pmsg++;         /* next message */
+	}
+
+	/* Disable irq */
+	hdmi_i2c_irq_disable(hdmi_dev);
+
+	mutex_unlock(&i2c_dev->i2c_lock);
+
+	return i;
+}
+
+static u32 oaktrail_hdmi_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_algorithm oaktrail_hdmi_i2c_algorithm = {
+	.master_xfer	= oaktrail_hdmi_i2c_access,
+	.functionality  = oaktrail_hdmi_i2c_func,
+};
+
+static struct i2c_adapter oaktrail_hdmi_i2c_adapter = {
+	.name		= "oaktrail_hdmi_i2c",
+	.nr		= 3,
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_DDC,
+	.algo		= &oaktrail_hdmi_i2c_algorithm,
+};
+
+static void hdmi_i2c_read(struct oaktrail_hdmi_dev *hdmi_dev)
+{
+	struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev;
+	struct i2c_msg *msg = i2c_dev->msg;
+	u8 *buf = msg->buf;
+	u32 temp;
+	int i, offset;
+
+	offset = i2c_dev->buf_offset;
+	for (i = 0; i < 0x10; i++) {
+		temp = HDMI_READ(HDMI_HI2CRDB0 + (i * 4));
+		memcpy(buf + (offset + i * 4), &temp, 4);
+	}
+	i2c_dev->buf_offset += (0x10 * 4);
+
+	/* clearing read buffer full intr */
+	temp = HDMI_READ(HDMI_HISR);
+	HDMI_WRITE(HDMI_HISR, temp | HDMI_INTR_I2C_FULL);
+	HDMI_READ(HDMI_HISR);
+
+	/* continue read transaction */
+	temp = HDMI_READ(HDMI_HI2CHCR);
+	HDMI_WRITE(HDMI_HI2CHCR, temp | HI2C_READ_CONTINUE);
+	HDMI_READ(HDMI_HI2CHCR);
+
+	i2c_dev->status = I2C_READ_DONE;
+	return;
+}
+
+static void hdmi_i2c_transaction_done(struct oaktrail_hdmi_dev *hdmi_dev)
+{
+	struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev;
+	u32 temp;
+
+	/* clear transaction done intr */
+	temp = HDMI_READ(HDMI_HISR);
+	HDMI_WRITE(HDMI_HISR, temp | HDMI_INTR_I2C_DONE);
+	HDMI_READ(HDMI_HISR);
+
+
+	temp = HDMI_READ(HDMI_HI2CHCR);
+	HDMI_WRITE(HDMI_HI2CHCR, temp & ~HI2C_ENABLE_TRANSACTION);
+	HDMI_READ(HDMI_HI2CHCR);
+
+	i2c_dev->status = I2C_TRANSACTION_DONE;
+	return;
+}
+
+static irqreturn_t oaktrail_hdmi_i2c_handler(int this_irq, void *dev)
+{
+	struct oaktrail_hdmi_dev *hdmi_dev = dev;
+	struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev;
+	u32 stat;
+
+	stat = HDMI_READ(HDMI_HISR);
+
+	if (stat & HDMI_INTR_HPD) {
+		HDMI_WRITE(HDMI_HISR, stat | HDMI_INTR_HPD);
+		HDMI_READ(HDMI_HISR);
+	}
+
+	if (stat & HDMI_INTR_I2C_FULL)
+		hdmi_i2c_read(hdmi_dev);
+
+	if (stat & HDMI_INTR_I2C_DONE)
+		hdmi_i2c_transaction_done(hdmi_dev);
+
+	complete(&i2c_dev->complete);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * choose alternate function 2 of GPIO pin 52, 53,
+ * which is used by HDMI I2C logic
+ */
+static void oaktrail_hdmi_i2c_gpio_fix(void)
+{
+	void *base;
+	unsigned int gpio_base = 0xff12c000;
+	int gpio_len = 0x1000;
+	u32 temp;
+
+	base = ioremap((resource_size_t)gpio_base, gpio_len);
+	if (base == NULL) {
+		DRM_ERROR("gpio ioremap fail\n");
+		return;
+	}
+
+	temp = readl(base + 0x44);
+	DRM_DEBUG_DRIVER("old gpio val %x\n", temp);
+	writel((temp | 0x00000a00), (base +  0x44));
+	temp = readl(base + 0x44);
+	DRM_DEBUG_DRIVER("new gpio val %x\n", temp);
+
+	iounmap(base);
+}
+
+int oaktrail_hdmi_i2c_init(struct pci_dev *dev)
+{
+	struct oaktrail_hdmi_dev *hdmi_dev;
+	struct hdmi_i2c_dev *i2c_dev;
+	int ret;
+
+	hdmi_dev = pci_get_drvdata(dev);
+
+	i2c_dev = kzalloc(sizeof(struct hdmi_i2c_dev), GFP_KERNEL);
+	if (i2c_dev == NULL) {
+		DRM_ERROR("Can't allocate interface\n");
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_dev->adap = &oaktrail_hdmi_i2c_adapter;
+	i2c_dev->status = I2C_STAT_INIT;
+	init_completion(&i2c_dev->complete);
+	mutex_init(&i2c_dev->i2c_lock);
+	i2c_set_adapdata(&oaktrail_hdmi_i2c_adapter, hdmi_dev);
+	hdmi_dev->i2c_dev = i2c_dev;
+
+	/* Enable HDMI I2C function on gpio */
+	oaktrail_hdmi_i2c_gpio_fix();
+
+	/* request irq */
+	ret = request_irq(dev->irq, oaktrail_hdmi_i2c_handler, IRQF_SHARED,
+			  oaktrail_hdmi_i2c_adapter.name, hdmi_dev);
+	if (ret) {
+		DRM_ERROR("Failed to request IRQ for I2C controller\n");
+		goto err;
+	}
+
+	/* Adapter registration */
+	ret = i2c_add_numbered_adapter(&oaktrail_hdmi_i2c_adapter);
+	return ret;
+
+err:
+	kfree(i2c_dev);
+exit:
+	return ret;
+}
+
+void oaktrail_hdmi_i2c_exit(struct pci_dev *dev)
+{
+	struct oaktrail_hdmi_dev *hdmi_dev;
+	struct hdmi_i2c_dev *i2c_dev;
+
+	hdmi_dev = pci_get_drvdata(dev);
+	if (i2c_del_adapter(&oaktrail_hdmi_i2c_adapter))
+		DRM_DEBUG_DRIVER("Failed to delete hdmi-i2c adapter\n");
+
+	i2c_dev = hdmi_dev->i2c_dev;
+	kfree(i2c_dev);
+	free_irq(dev->irq, hdmi_dev);
+}
diff --git a/drivers/gpu/drm/gma500/oaktrail_lvds.c b/drivers/gpu/drm/gma500/oaktrail_lvds.c
new file mode 100644
index 0000000..a552226
--- /dev/null
+++ b/drivers/gpu/drm/gma500/oaktrail_lvds.c
@@ -0,0 +1,406 @@
+/*
+ * Copyright © 2006-2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ *	Dave Airlie <airlied@linux.ie>
+ *	Jesse Barnes <jesse.barnes@intel.com>
+ */
+
+#include <linux/i2c.h>
+#include <drm/drmP.h>
+#include <asm/mrst.h>
+
+#include "intel_bios.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "power.h"
+#include <linux/pm_runtime.h>
+
+/* The max/min PWM frequency in BPCR[31:17] - */
+/* The smallest number is 1 (not 0) that can fit in the
+ * 15-bit field of the and then*/
+/* shifts to the left by one bit to get the actual 16-bit
+ * value that the 15-bits correspond to.*/
+#define MRST_BLC_MAX_PWM_REG_FREQ	    0xFFFF
+#define BRIGHTNESS_MAX_LEVEL 100
+
+/**
+ * Sets the power state for the panel.
+ */
+static void oaktrail_lvds_set_power(struct drm_device *dev,
+				struct psb_intel_output *output, bool on)
+{
+	u32 pp_status;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	if (on) {
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
+			  POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while ((pp_status & (PP_ON | PP_READY)) == PP_READY);
+		dev_priv->is_lvds_on = true;
+		if (dev_priv->ops->lvds_bl_power)
+			dev_priv->ops->lvds_bl_power(dev, true);
+	} else {
+		if (dev_priv->ops->lvds_bl_power)
+			dev_priv->ops->lvds_bl_power(dev, false);
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
+			  ~POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while (pp_status & PP_ON);
+		dev_priv->is_lvds_on = false;
+		pm_request_idle(&dev->pdev->dev);
+	}
+	gma_power_end(dev);
+}
+
+static void oaktrail_lvds_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+
+	if (mode == DRM_MODE_DPMS_ON)
+		oaktrail_lvds_set_power(dev, output, true);
+	else
+		oaktrail_lvds_set_power(dev, output, false);
+
+	/* XXX: We never power down the LVDS pairs. */
+}
+
+static void oaktrail_lvds_mode_set(struct drm_encoder *encoder,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+	struct psb_intel_mode_device *mode_dev =
+				enc_to_psb_intel_output(encoder)->mode_dev;
+	struct drm_device *dev = encoder->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 lvds_port;
+	uint64_t v = DRM_MODE_SCALE_FULLSCREEN;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	/*
+	 * The LVDS pin pair will already have been turned on in the
+	 * psb_intel_crtc_mode_set since it has a large impact on the DPLL
+	 * settings.
+	 */
+	lvds_port = (REG_READ(LVDS) &
+		    (~LVDS_PIPEB_SELECT)) |
+		    LVDS_PORT_EN |
+		    LVDS_BORDER_EN;
+
+	/* If the firmware says dither on Moorestown, or the BIOS does
+	   on Oaktrail then enable dithering */
+	if (mode_dev->panel_wants_dither || dev_priv->lvds_dither)
+		lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE;
+
+	REG_WRITE(LVDS, lvds_port);
+
+	drm_connector_property_get_value(
+		&enc_to_psb_intel_output(encoder)->base,
+		dev->mode_config.scaling_mode_property,
+		&v);
+
+	if (v == DRM_MODE_SCALE_NO_SCALE)
+		REG_WRITE(PFIT_CONTROL, 0);
+	else if (v == DRM_MODE_SCALE_ASPECT) {
+		if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) ||
+		    (mode->hdisplay != adjusted_mode->crtc_hdisplay)) {
+			if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) ==
+			    (mode->hdisplay * adjusted_mode->crtc_vdisplay))
+				REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
+			else if ((adjusted_mode->crtc_hdisplay *
+				mode->vdisplay) > (mode->hdisplay *
+				adjusted_mode->crtc_vdisplay))
+				REG_WRITE(PFIT_CONTROL, PFIT_ENABLE |
+					  PFIT_SCALING_MODE_PILLARBOX);
+			else
+				REG_WRITE(PFIT_CONTROL, PFIT_ENABLE |
+					  PFIT_SCALING_MODE_LETTERBOX);
+		} else
+			REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
+	} else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/
+		REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
+
+	gma_power_end(dev);
+}
+
+static void oaktrail_lvds_prepare(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct psb_intel_mode_device *mode_dev = output->mode_dev;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
+	mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
+					  BACKLIGHT_DUTY_CYCLE_MASK);
+	oaktrail_lvds_set_power(dev, output, false);
+	gma_power_end(dev);
+}
+
+static u32 oaktrail_lvds_get_max_backlight(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 ret;
+
+	if (gma_power_begin(dev, false)) {
+		ret = ((REG_READ(BLC_PWM_CTL) &
+			  BACKLIGHT_MODULATION_FREQ_MASK) >>
+			  BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+		gma_power_end(dev);
+	} else
+		ret = ((dev_priv->saveBLC_PWM_CTL &
+			  BACKLIGHT_MODULATION_FREQ_MASK) >>
+			  BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+	return ret;
+}
+
+static void oaktrail_lvds_commit(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct psb_intel_mode_device *mode_dev = output->mode_dev;
+
+	if (mode_dev->backlight_duty_cycle == 0)
+		mode_dev->backlight_duty_cycle =
+					oaktrail_lvds_get_max_backlight(dev);
+	oaktrail_lvds_set_power(dev, output, true);
+}
+
+static const struct drm_encoder_helper_funcs oaktrail_lvds_helper_funcs = {
+	.dpms = oaktrail_lvds_dpms,
+	.mode_fixup = psb_intel_lvds_mode_fixup,
+	.prepare = oaktrail_lvds_prepare,
+	.mode_set = oaktrail_lvds_mode_set,
+	.commit = oaktrail_lvds_commit,
+};
+
+static struct drm_display_mode lvds_configuration_modes[] = {
+	/* hard coded fixed mode for TPO LTPS LPJ040K001A */
+	{ DRM_MODE("800x480",  DRM_MODE_TYPE_DRIVER, 33264, 800, 836,
+		   846, 1056, 0, 480, 489, 491, 525, 0, 0) },
+	/* hard coded fixed mode for LVDS 800x480 */
+	{ DRM_MODE("800x480",  DRM_MODE_TYPE_DRIVER, 30994, 800, 801,
+		   802, 1024, 0, 480, 481, 482, 525, 0, 0) },
+	/* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */
+	{ DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1072,
+		   1104, 1184, 0, 600, 603, 604, 608, 0, 0) },
+	/* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */
+	{ DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1104,
+		   1136, 1184, 0, 600, 603, 604, 608, 0, 0) },
+	/* hard coded fixed mode for Sharp wsvga LVDS 1024x600 */
+	{ DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 48885, 1024, 1124,
+		   1204, 1312, 0, 600, 607, 610, 621, 0, 0) },
+	/* hard coded fixed mode for LVDS 1024x768 */
+	{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
+		   1184, 1344, 0, 768, 771, 777, 806, 0, 0) },
+	/* hard coded fixed mode for LVDS 1366x768 */
+	{ DRM_MODE("1366x768", DRM_MODE_TYPE_DRIVER, 77500, 1366, 1430,
+		   1558, 1664, 0, 768, 769, 770, 776, 0, 0) },
+};
+
+/* Returns the panel fixed mode from configuration. */
+
+static struct drm_display_mode *
+oaktrail_lvds_get_configuration_mode(struct drm_device *dev)
+{
+	struct drm_display_mode *mode = NULL;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct oaktrail_timing_info *ti = &dev_priv->gct_data.DTD;
+
+	if (dev_priv->vbt_data.size != 0x00) { /*if non-zero, then use vbt*/
+		mode = kzalloc(sizeof(*mode), GFP_KERNEL);
+		if (!mode)
+			return NULL;
+
+		mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo;
+		mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo;
+		mode->hsync_start = mode->hdisplay + \
+				((ti->hsync_offset_hi << 8) | \
+				ti->hsync_offset_lo);
+		mode->hsync_end = mode->hsync_start + \
+				((ti->hsync_pulse_width_hi << 8) | \
+				ti->hsync_pulse_width_lo);
+		mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \
+							ti->hblank_lo);
+		mode->vsync_start = \
+			mode->vdisplay + ((ti->vsync_offset_hi << 4) | \
+						ti->vsync_offset_lo);
+		mode->vsync_end = \
+			mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \
+						ti->vsync_pulse_width_lo);
+		mode->vtotal = mode->vdisplay + \
+				((ti->vblank_hi << 8) | ti->vblank_lo);
+		mode->clock = ti->pixel_clock * 10;
+#if 0
+		printk(KERN_INFO "hdisplay is %d\n", mode->hdisplay);
+		printk(KERN_INFO "vdisplay is %d\n", mode->vdisplay);
+		printk(KERN_INFO "HSS is %d\n", mode->hsync_start);
+		printk(KERN_INFO "HSE is %d\n", mode->hsync_end);
+		printk(KERN_INFO "htotal is %d\n", mode->htotal);
+		printk(KERN_INFO "VSS is %d\n", mode->vsync_start);
+		printk(KERN_INFO "VSE is %d\n", mode->vsync_end);
+		printk(KERN_INFO "vtotal is %d\n", mode->vtotal);
+		printk(KERN_INFO "clock is %d\n", mode->clock);
+#endif
+	} else
+		mode = drm_mode_duplicate(dev, &lvds_configuration_modes[2]);
+
+	drm_mode_set_name(mode);
+	drm_mode_set_crtcinfo(mode, 0);
+
+	return mode;
+}
+
+/**
+ * oaktrail_lvds_init - setup LVDS connectors on this device
+ * @dev: drm device
+ *
+ * Create the connector, register the LVDS DDC bus, and try to figure out what
+ * modes we can display on the LVDS panel (if present).
+ */
+void oaktrail_lvds_init(struct drm_device *dev,
+		    struct psb_intel_mode_device *mode_dev)
+{
+	struct psb_intel_output *psb_intel_output;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct drm_psb_private *dev_priv =
+				(struct drm_psb_private *) dev->dev_private;
+	struct edid *edid;
+	int ret = 0;
+	struct i2c_adapter *i2c_adap;
+	struct drm_display_mode *scan;	/* *modes, *bios_mode; */
+
+	psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL);
+	if (!psb_intel_output)
+		return;
+
+	psb_intel_output->mode_dev = mode_dev;
+	connector = &psb_intel_output->base;
+	encoder = &psb_intel_output->enc;
+	dev_priv->is_lvds_on = true;
+	drm_connector_init(dev, &psb_intel_output->base,
+			   &psb_intel_lvds_connector_funcs,
+			   DRM_MODE_CONNECTOR_LVDS);
+
+	drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_lvds_enc_funcs,
+			 DRM_MODE_ENCODER_LVDS);
+
+	drm_mode_connector_attach_encoder(&psb_intel_output->base,
+					  &psb_intel_output->enc);
+	psb_intel_output->type = INTEL_OUTPUT_LVDS;
+
+	drm_encoder_helper_add(encoder, &oaktrail_lvds_helper_funcs);
+	drm_connector_helper_add(connector,
+				 &psb_intel_lvds_connector_helper_funcs);
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+	drm_connector_attach_property(connector,
+					dev->mode_config.scaling_mode_property,
+					DRM_MODE_SCALE_FULLSCREEN);
+	drm_connector_attach_property(connector,
+					dev_priv->backlight_property,
+					BRIGHTNESS_MAX_LEVEL);
+
+	mode_dev->panel_wants_dither = false;
+	if (dev_priv->vbt_data.size != 0x00)
+		mode_dev->panel_wants_dither = (dev_priv->gct_data.
+			Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE);
+
+	/*
+	 * LVDS discovery:
+	 * 1) check for EDID on DDC
+	 * 2) check for VBT data
+	 * 3) check to see if LVDS is already on
+	 *    if none of the above, no panel
+	 * 4) make sure lid is open
+	 *    if closed, act like it's not there for now
+	 */
+
+	i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus);
+	if (i2c_adap == NULL)
+		dev_err(dev->dev, "No ddc adapter available!\n");
+	/*
+	 * Attempt to get the fixed panel mode from DDC.  Assume that the
+	 * preferred mode is the right one.
+	 */
+	if (i2c_adap) {
+		edid = drm_get_edid(connector, i2c_adap);
+		if (edid) {
+			drm_mode_connector_update_edid_property(connector,
+									edid);
+			ret = drm_add_edid_modes(connector, edid);
+			kfree(edid);
+		}
+
+		list_for_each_entry(scan, &connector->probed_modes, head) {
+			if (scan->type & DRM_MODE_TYPE_PREFERRED) {
+				mode_dev->panel_fixed_mode =
+				    drm_mode_duplicate(dev, scan);
+				goto out;	/* FIXME: check for quirks */
+			}
+		}
+	}
+	/*
+	 * If we didn't get EDID, try geting panel timing
+	 * from configuration data
+	 */
+	mode_dev->panel_fixed_mode = oaktrail_lvds_get_configuration_mode(dev);
+
+	if (mode_dev->panel_fixed_mode) {
+		mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
+		goto out;	/* FIXME: check for quirks */
+	}
+
+	/* If we still don't have a mode after all that, give up. */
+	if (!mode_dev->panel_fixed_mode) {
+		dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n");
+		goto failed_find;
+	}
+
+out:
+	drm_sysfs_connector_add(connector);
+	return;
+
+failed_find:
+	dev_dbg(dev->dev, "No LVDS modes found, disabling.\n");
+	if (psb_intel_output->ddc_bus)
+		psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
+
+/* failed_ddc: */
+
+	drm_encoder_cleanup(encoder);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 11/12] gma500: Add support for Cedarview

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

Again this is similar but has some differences so we have a set of plug in
support. This does make the driver bigger than is needed in some respects
but the tradeoff for maintainability is huge.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/cdv_device.c        |  351 +++++++
 drivers/gpu/drm/gma500/cdv_device.h        |   36 +
 drivers/gpu/drm/gma500/cdv_intel_crt.c     |  326 ++++++
 drivers/gpu/drm/gma500/cdv_intel_display.c | 1508 ++++++++++++++++++++++++++++
 drivers/gpu/drm/gma500/cdv_intel_hdmi.c    |  376 +++++++
 drivers/gpu/drm/gma500/cdv_intel_lvds.c    |  721 +++++++++++++
 6 files changed, 3318 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpu/drm/gma500/cdv_device.c
 create mode 100644 drivers/gpu/drm/gma500/cdv_device.h
 create mode 100644 drivers/gpu/drm/gma500/cdv_intel_crt.c
 create mode 100644 drivers/gpu/drm/gma500/cdv_intel_display.c
 create mode 100644 drivers/gpu/drm/gma500/cdv_intel_hdmi.c
 create mode 100644 drivers/gpu/drm/gma500/cdv_intel_lvds.c


diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c
new file mode 100644
index 0000000..87614e0
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_device.c
@@ -0,0 +1,351 @@
+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include <linux/backlight.h>
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "psb_drm.h"
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+#include "intel_bios.h"
+#include "cdv_device.h"
+
+#define VGA_SR_INDEX		0x3c4
+#define VGA_SR_DATA		0x3c5
+
+/* FIXME: should check if we are the active VGA device ?? */
+static void cdv_disable_vga(struct drm_device *dev)
+{
+	u8 sr1;
+	u32 vga_reg;
+
+	vga_reg = VGACNTRL;
+
+	outb(1, VGA_SR_INDEX);
+	sr1 = inb(VGA_SR_DATA);
+	outb(sr1 | 1<<5, VGA_SR_DATA);
+	udelay(300);
+
+	REG_WRITE(vga_reg, VGA_DISP_DISABLE);
+	REG_READ(vga_reg);
+}
+
+static int cdv_output_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	cdv_disable_vga(dev);
+
+	cdv_intel_crt_init(dev, &dev_priv->mode_dev);
+	cdv_intel_lvds_init(dev, &dev_priv->mode_dev);
+
+	/* These bits indicate HDMI not SDVO on CDV, but we don't yet support
+	   the HDMI interface */
+	if (REG_READ(SDVOB) & SDVO_DETECTED)
+		cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOB);
+	if (REG_READ(SDVOC) & SDVO_DETECTED)
+		cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOC);
+	return 0;
+}
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+
+/*
+ *	Poulsbo Backlight Interfaces
+ */
+
+#define BLC_PWM_PRECISION_FACTOR 100	/* 10000000 */
+#define BLC_PWM_FREQ_CALC_CONSTANT 32
+#define MHz 1000000
+
+#define PSB_BLC_PWM_PRECISION_FACTOR    10
+#define PSB_BLC_MAX_PWM_REG_FREQ        0xFFFE
+#define PSB_BLC_MIN_PWM_REG_FREQ        0x2
+
+#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
+#define PSB_BACKLIGHT_PWM_CTL_SHIFT	(16)
+
+static int cdv_brightness;
+static struct backlight_device *cdv_backlight_device;
+
+static int cdv_get_brightness(struct backlight_device *bd)
+{
+	/* return locally cached var instead of HW read (due to DPST etc.) */
+	/* FIXME: ideally return actual value in case firmware fiddled with
+	   it */
+	return cdv_brightness;
+}
+
+
+static int cdv_backlight_setup(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	unsigned long core_clock;
+	/* u32 bl_max_freq; */
+	/* unsigned long value; */
+	u16 bl_max_freq;
+	uint32_t value;
+	uint32_t blc_pwm_precision_factor;
+
+	/* get bl_max_freq and pol from dev_priv*/
+	if (!dev_priv->lvds_bl) {
+		dev_err(dev->dev, "Has no valid LVDS backlight info\n");
+		return -ENOENT;
+	}
+	bl_max_freq = dev_priv->lvds_bl->freq;
+	blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR;
+
+	core_clock = dev_priv->core_freq;
+
+	value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
+	value *= blc_pwm_precision_factor;
+	value /= bl_max_freq;
+	value /= blc_pwm_precision_factor;
+
+	if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ ||
+		 value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ)
+				return -ERANGE;
+	else {
+		/* FIXME */
+	}
+	return 0;
+}
+
+static int cdv_set_brightness(struct backlight_device *bd)
+{
+	int level = bd->props.brightness;
+
+	/* Percentage 1-100% being valid */
+	if (level < 1)
+		level = 1;
+
+	/*cdv_intel_lvds_set_brightness(dev, level); FIXME */
+	cdv_brightness = level;
+	return 0;
+}
+
+static const struct backlight_ops cdv_ops = {
+	.get_brightness = cdv_get_brightness,
+	.update_status  = cdv_set_brightness,
+};
+
+static int cdv_backlight_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int ret;
+	struct backlight_properties props;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 100;
+	props.type = BACKLIGHT_PLATFORM;
+
+	cdv_backlight_device = backlight_device_register("psb-bl",
+					NULL, (void *)dev, &cdv_ops, &props);
+	if (IS_ERR(cdv_backlight_device))
+		return PTR_ERR(cdv_backlight_device);
+
+	ret = cdv_backlight_setup(dev);
+	if (ret < 0) {
+		backlight_device_unregister(cdv_backlight_device);
+		cdv_backlight_device = NULL;
+		return ret;
+	}
+	cdv_backlight_device->props.brightness = 100;
+	cdv_backlight_device->props.max_brightness = 100;
+	backlight_update_status(cdv_backlight_device);
+	dev_priv->backlight_device = cdv_backlight_device;
+	return 0;
+}
+
+#endif
+
+/*
+ *	Provide the Cedarview specific chip logic and low level methods
+ *	for power management
+ *
+ *	FIXME: we need to implement the apm/ospm base management bits
+ *	for this and the MID devices.
+ */
+
+static inline u32 CDV_MSG_READ32(uint port, uint offset)
+{
+	int mcr = (0x10<<24) | (port << 16) | (offset << 8);
+	uint32_t ret_val = 0;
+	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+	pci_write_config_dword(pci_root, 0xD0, mcr);
+	pci_read_config_dword(pci_root, 0xD4, &ret_val);
+	pci_dev_put(pci_root);
+	return ret_val;
+}
+
+static inline void CDV_MSG_WRITE32(uint port, uint offset, u32 value)
+{
+	int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0;
+	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+	pci_write_config_dword(pci_root, 0xD4, value);
+	pci_write_config_dword(pci_root, 0xD0, mcr);
+	pci_dev_put(pci_root);
+}
+
+#define PSB_APM_CMD			0x0
+#define PSB_APM_STS			0x04
+#define PSB_PM_SSC			0x20
+#define PSB_PM_SSS			0x30
+#define PSB_PWRGT_GFX_MASK		0x3
+#define CDV_PWRGT_DISPLAY_CNTR		0x000fc00c
+#define CDV_PWRGT_DISPLAY_STS		0x000fc00c
+
+static void cdv_init_pm(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 pwr_cnt;
+	int i;
+
+	dev_priv->apm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
+							PSB_APMBA) & 0xFFFF;
+	dev_priv->ospm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
+							PSB_OSPMBA) & 0xFFFF;
+
+	/* Force power on for now */
+	pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD);
+	pwr_cnt &= ~PSB_PWRGT_GFX_MASK;
+
+	outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD);
+	for (i = 0; i < 5; i++) {
+		u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS);
+		if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0)
+			break;
+		udelay(10);
+	}
+	pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
+	pwr_cnt &= ~CDV_PWRGT_DISPLAY_CNTR;
+	outl(pwr_cnt, dev_priv->ospm_base + PSB_PM_SSC);
+	for (i = 0; i < 5; i++) {
+		u32 pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
+		if ((pwr_sts & CDV_PWRGT_DISPLAY_STS) == 0)
+			break;
+		udelay(10);
+	}
+}
+
+/**
+ *	cdv_save_display_registers	-	save registers lost on suspend
+ *	@dev: our DRM device
+ *
+ *	Save the state we need in order to be able to restore the interface
+ *	upon resume from suspend
+ *
+ *	FIXME: review
+ */
+static int cdv_save_display_registers(struct drm_device *dev)
+{
+	return 0;
+}
+
+/**
+ *	cdv_restore_display_registers	-	restore lost register state
+ *	@dev: our DRM device
+ *
+ *	Restore register state that was lost during suspend and resume.
+ *
+ *	FIXME: review
+ */
+static int cdv_restore_display_registers(struct drm_device *dev)
+{
+	return 0;
+}
+
+static int cdv_power_down(struct drm_device *dev)
+{
+	return 0;
+}
+
+static int cdv_power_up(struct drm_device *dev)
+{
+	return 0;
+}
+
+/* FIXME ? - shared with Poulsbo */
+static void cdv_get_core_freq(struct drm_device *dev)
+{
+	uint32_t clock;
+	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	pci_write_config_dword(pci_root, 0xD0, 0xD0050300);
+	pci_read_config_dword(pci_root, 0xD4, &clock);
+	pci_dev_put(pci_root);
+
+	switch (clock & 0x07) {
+	case 0:
+		dev_priv->core_freq = 100;
+		break;
+	case 1:
+		dev_priv->core_freq = 133;
+		break;
+	case 2:
+		dev_priv->core_freq = 150;
+		break;
+	case 3:
+		dev_priv->core_freq = 178;
+		break;
+	case 4:
+		dev_priv->core_freq = 200;
+		break;
+	case 5:
+	case 6:
+	case 7:
+		dev_priv->core_freq = 266;
+	default:
+		dev_priv->core_freq = 0;
+	}
+}
+
+static int cdv_chip_setup(struct drm_device *dev)
+{
+	cdv_get_core_freq(dev);
+	gma_intel_opregion_init(dev);
+	psb_intel_init_bios(dev);
+	return 0;
+}
+
+/* CDV is much like Poulsbo but has MID like SGX offsets and PM */
+
+const struct psb_ops cdv_chip_ops = {
+	.name = "Cedartrail",
+	.accel_2d = 0,
+	.pipes = 2,
+	.sgx_offset = MRST_SGX_OFFSET,
+	.chip_setup = cdv_chip_setup,
+
+	.crtc_helper = &cdv_intel_helper_funcs,
+	.crtc_funcs = &cdv_intel_crtc_funcs,
+
+	.output_init = cdv_output_init,
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+	.backlight_init = cdv_backlight_init,
+#endif
+
+	.init_pm = cdv_init_pm,
+	.save_regs = cdv_save_display_registers,
+	.restore_regs = cdv_restore_display_registers,
+	.power_down = cdv_power_down,
+	.power_up = cdv_power_up,
+};
diff --git a/drivers/gpu/drm/gma500/cdv_device.h b/drivers/gpu/drm/gma500/cdv_device.h
new file mode 100644
index 0000000..2a88b7b
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_device.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright © 2011 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+extern const struct drm_crtc_helper_funcs cdv_intel_helper_funcs;
+extern const struct drm_crtc_funcs cdv_intel_crtc_funcs;
+extern void cdv_intel_crt_init(struct drm_device *dev,
+			struct psb_intel_mode_device *mode_dev);
+extern void cdv_intel_lvds_init(struct drm_device *dev,
+			struct psb_intel_mode_device *mode_dev);
+extern void cdv_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev,
+			int reg);
+extern struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev,
+					     struct drm_crtc *crtc);
+
+extern inline void cdv_intel_wait_for_vblank(struct drm_device *dev)
+{
+	/* Wait for 20ms, i.e. one cycle at 50hz. */
+        /* FIXME: msleep ?? */
+	mdelay(20);
+}
+
+
diff --git a/drivers/gpu/drm/gma500/cdv_intel_crt.c b/drivers/gpu/drm/gma500/cdv_intel_crt.c
new file mode 100644
index 0000000..efda63b
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_intel_crt.c
@@ -0,0 +1,326 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/i2c.h>
+#include <drm/drmP.h>
+
+#include "intel_bios.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "power.h"
+#include <linux/pm_runtime.h>
+
+
+static void cdv_intel_crt_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	u32 temp, reg;
+	reg = ADPA;
+
+	temp = REG_READ(reg);
+	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
+	temp &= ~ADPA_DAC_ENABLE;
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		temp |= ADPA_DAC_ENABLE;
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+		temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
+		break;
+	case DRM_MODE_DPMS_SUSPEND:
+		temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
+		break;
+	case DRM_MODE_DPMS_OFF:
+		temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
+		break;
+	}
+
+	REG_WRITE(reg, temp);
+}
+
+static int cdv_intel_crt_mode_valid(struct drm_connector *connector,
+				struct drm_display_mode *mode)
+{
+	int max_clock = 0;
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	/* The lowest clock for CDV is 20000KHz */
+	if (mode->clock < 20000)
+		return MODE_CLOCK_LOW;
+
+	/* The max clock for CDV is 355 instead of 400 */
+	max_clock = 355000;
+	if (mode->clock > max_clock)
+		return MODE_CLOCK_HIGH;
+
+	if (mode->hdisplay > 1680 || mode->vdisplay > 1050)
+		return MODE_PANEL;
+
+	return MODE_OK;
+}
+
+static bool cdv_intel_crt_mode_fixup(struct drm_encoder *encoder,
+				 struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static void cdv_intel_crt_mode_set(struct drm_encoder *encoder,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+
+	struct drm_device *dev = encoder->dev;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct psb_intel_crtc *psb_intel_crtc =
+					to_psb_intel_crtc(crtc);
+	int dpll_md_reg;
+	u32 adpa, dpll_md;
+	u32 adpa_reg;
+
+	if (psb_intel_crtc->pipe == 0)
+		dpll_md_reg = DPLL_A_MD;
+	else
+		dpll_md_reg = DPLL_B_MD;
+
+	adpa_reg = ADPA;
+
+	/*
+	 * Disable separate mode multiplier used when cloning SDVO to CRT
+	 * XXX this needs to be adjusted when we really are cloning
+	 */
+	{
+		dpll_md = REG_READ(dpll_md_reg);
+		REG_WRITE(dpll_md_reg,
+			   dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
+	}
+
+	adpa = 0;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		adpa |= ADPA_HSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		adpa |= ADPA_VSYNC_ACTIVE_HIGH;
+
+	if (psb_intel_crtc->pipe == 0)
+		adpa |= ADPA_PIPE_A_SELECT;
+	else
+		adpa |= ADPA_PIPE_B_SELECT;
+
+	REG_WRITE(adpa_reg, adpa);
+}
+
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
+ *
+ * \return true if CRT is connected.
+ * \return false if CRT is disconnected.
+ */
+static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
+								bool force)
+{
+	struct drm_device *dev = connector->dev;
+	u32 hotplug_en;
+	int i, tries = 0, ret = false;
+	u32 adpa_orig;
+
+	/* disable the DAC when doing the hotplug detection */
+
+	adpa_orig = REG_READ(ADPA);
+
+	REG_WRITE(ADPA, adpa_orig & ~(ADPA_DAC_ENABLE));
+
+	/*
+	 * On a CDV thep, CRT detect sequence need to be done twice
+	 * to get a reliable result.
+	 */
+	tries = 2;
+
+	hotplug_en = REG_READ(PORT_HOTPLUG_EN);
+	hotplug_en &= ~(CRT_HOTPLUG_DETECT_MASK);
+	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
+
+	hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+	hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+
+	for (i = 0; i < tries ; i++) {
+		unsigned long timeout;
+		/* turn on the FORCE_DETECT */
+		REG_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+		timeout = jiffies + msecs_to_jiffies(1000);
+		/* wait for FORCE_DETECT to go off */
+		do {
+			if (!(REG_READ(PORT_HOTPLUG_EN) &
+					CRT_HOTPLUG_FORCE_DETECT))
+				break;
+			msleep(1);
+		} while (time_after(timeout, jiffies));
+	}
+
+	if ((REG_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) !=
+	    CRT_HOTPLUG_MONITOR_NONE)
+		ret = true;
+
+	/* Restore the saved ADPA */
+	REG_WRITE(ADPA, adpa_orig);
+	return ret;
+}
+
+static enum drm_connector_status cdv_intel_crt_detect(
+				struct drm_connector *connector, bool force)
+{
+	if (cdv_intel_crt_detect_hotplug(connector, force))
+		return connector_status_connected;
+	else
+		return connector_status_disconnected;
+}
+
+static void cdv_intel_crt_destroy(struct drm_connector *connector)
+{
+	struct psb_intel_output *intel_output = to_psb_intel_output(connector);
+
+	psb_intel_i2c_destroy(intel_output->ddc_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static int cdv_intel_crt_get_modes(struct drm_connector *connector)
+{
+	struct psb_intel_output *intel_output =
+				to_psb_intel_output(connector);
+	return psb_intel_ddc_get_modes(intel_output);
+}
+
+static int cdv_intel_crt_set_property(struct drm_connector *connector,
+				  struct drm_property *property,
+				  uint64_t value)
+{
+	return 0;
+}
+
+/*
+ * Routines for controlling stuff on the analog port
+ */
+
+static const struct drm_encoder_helper_funcs cdv_intel_crt_helper_funcs = {
+	.dpms = cdv_intel_crt_dpms,
+	.mode_fixup = cdv_intel_crt_mode_fixup,
+	.prepare = psb_intel_encoder_prepare,
+	.commit = psb_intel_encoder_commit,
+	.mode_set = cdv_intel_crt_mode_set,
+};
+
+static const struct drm_connector_funcs cdv_intel_crt_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.detect = cdv_intel_crt_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = cdv_intel_crt_destroy,
+	.set_property = cdv_intel_crt_set_property,
+};
+
+static const struct drm_connector_helper_funcs
+				cdv_intel_crt_connector_helper_funcs = {
+	.mode_valid = cdv_intel_crt_mode_valid,
+	.get_modes = cdv_intel_crt_get_modes,
+	.best_encoder = psb_intel_best_encoder,
+};
+
+static void cdv_intel_crt_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs cdv_intel_crt_enc_funcs = {
+	.destroy = cdv_intel_crt_enc_destroy,
+};
+
+void cdv_intel_crt_init(struct drm_device *dev,
+			struct psb_intel_mode_device *mode_dev)
+{
+
+	struct psb_intel_output *psb_intel_output;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+
+	u32 i2c_reg;
+
+	psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL);
+	if (!psb_intel_output)
+		return;
+
+	psb_intel_output->mode_dev = mode_dev;
+	connector = &psb_intel_output->base;
+	drm_connector_init(dev, connector,
+		&cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
+
+	encoder = &psb_intel_output->enc;
+	drm_encoder_init(dev, encoder,
+		&cdv_intel_crt_enc_funcs, DRM_MODE_ENCODER_DAC);
+
+	drm_mode_connector_attach_encoder(&psb_intel_output->base,
+					  &psb_intel_output->enc);
+
+	/* Set up the DDC bus. */
+	i2c_reg = GPIOA;
+	/* Remove the following code for CDV */
+	/*
+	if (dev_priv->crt_ddc_bus != 0)
+		i2c_reg = dev_priv->crt_ddc_bus;
+	}*/
+	psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
+						i2c_reg, "CRTDDC_A");
+	if (!psb_intel_output->ddc_bus) {
+		dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
+			   "failed.\n");
+		goto failed_ddc;
+	}
+
+	psb_intel_output->type = INTEL_OUTPUT_ANALOG;
+	/*
+	psb_intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT);
+	psb_intel_output->crtc_mask = (1 << 0) | (1 << 1);
+	*/
+	connector->interlace_allowed = 0;
+	connector->doublescan_allowed = 0;
+
+	drm_encoder_helper_add(encoder, &cdv_intel_crt_helper_funcs);
+	drm_connector_helper_add(connector,
+					&cdv_intel_crt_connector_helper_funcs);
+
+	drm_sysfs_connector_add(connector);
+
+	return;
+failed_ddc:
+	drm_encoder_cleanup(&psb_intel_output->enc);
+	drm_connector_cleanup(&psb_intel_output->base);
+	kfree(psb_intel_output);
+	return;
+}
diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c
new file mode 100644
index 0000000..7b97c60
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_intel_display.c
@@ -0,0 +1,1508 @@
+/*
+ * Copyright © 2006-2011 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+
+#include <drm/drmP.h>
+#include "framebuffer.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "psb_intel_display.h"
+#include "power.h"
+#include "cdv_device.h"
+
+
+struct cdv_intel_range_t {
+	int min, max;
+};
+
+struct cdv_intel_p2_t {
+	int dot_limit;
+	int p2_slow, p2_fast;
+};
+
+struct cdv_intel_clock_t {
+	/* given values */
+	int n;
+	int m1, m2;
+	int p1, p2;
+	/* derived values */
+	int dot;
+	int vco;
+	int m;
+	int p;
+};
+
+#define INTEL_P2_NUM		      2
+
+struct cdv_intel_limit_t {
+	struct cdv_intel_range_t dot, vco, n, m, m1, m2, p, p1;
+	struct cdv_intel_p2_t p2;
+};
+
+#define CDV_LIMIT_SINGLE_LVDS_96	0
+#define CDV_LIMIT_SINGLE_LVDS_100	1
+#define CDV_LIMIT_DAC_HDMI_27		2
+#define CDV_LIMIT_DAC_HDMI_96		3
+
+static const struct cdv_intel_limit_t cdv_intel_limits[] = {
+	{			/* CDV_SIGNLE_LVDS_96MHz */
+	 .dot = {.min = 20000, .max = 115500},
+	 .vco = {.min = 1800000, .max = 3600000},
+	 .n = {.min = 2, .max = 6},
+	 .m = {.min = 60, .max = 160},
+	 .m1 = {.min = 0, .max = 0},
+	 .m2 = {.min = 58, .max = 158},
+	 .p = {.min = 28, .max = 140},
+	 .p1 = {.min = 2, .max = 10},
+	 .p2 = {.dot_limit = 200000,
+		.p2_slow = 14, .p2_fast = 14},
+	 },
+	{			/* CDV_SINGLE_LVDS_100MHz */
+	 .dot = {.min = 20000, .max = 115500},
+	 .vco = {.min = 1800000, .max = 3600000},
+	 .n = {.min = 2, .max = 6},
+	 .m = {.min = 60, .max = 160},
+	 .m1 = {.min = 0, .max = 0},
+	 .m2 = {.min = 58, .max = 158},
+	 .p = {.min = 28, .max = 140},
+	 .p1 = {.min = 2, .max = 10},
+	 /* The single-channel range is 25-112Mhz, and dual-channel
+	  * is 80-224Mhz.  Prefer single channel as much as possible.
+	  */
+	 .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14},
+	 },
+	{			/* CDV_DAC_HDMI_27MHz */
+	 .dot = {.min = 20000, .max = 400000},
+	 .vco = {.min = 1809000, .max = 3564000},
+	 .n = {.min = 1, .max = 1},
+	 .m = {.min = 67, .max = 132},
+	 .m1 = {.min = 0, .max = 0},
+	 .m2 = {.min = 65, .max = 130},
+	 .p = {.min = 5, .max = 90},
+	 .p1 = {.min = 1, .max = 9},
+	 .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5},
+	 },
+	{			/* CDV_DAC_HDMI_96MHz */
+	 .dot = {.min = 20000, .max = 400000},
+	 .vco = {.min = 1800000, .max = 3600000},
+	 .n = {.min = 2, .max = 6},
+	 .m = {.min = 60, .max = 160},
+	 .m1 = {.min = 0, .max = 0},
+	 .m2 = {.min = 58, .max = 158},
+	 .p = {.min = 5, .max = 100},
+	 .p1 = {.min = 1, .max = 10},
+	 .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5},
+	 },
+};
+
+#define _wait_for(COND, MS, W) ({ \
+	unsigned long timeout__ = jiffies + msecs_to_jiffies(MS);	\
+	int ret__ = 0;							\
+	while (!(COND)) {						\
+		if (time_after(jiffies, timeout__)) {			\
+			ret__ = -ETIMEDOUT;				\
+			break;						\
+		}							\
+		if (W && !in_dbg_master())				\
+			msleep(W);					\
+	}								\
+	ret__;								\
+})
+
+#define wait_for(COND, MS) _wait_for(COND, MS, 1)
+
+
+static int cdv_sb_read(struct drm_device *dev, u32 reg, u32 *val)
+{
+	int ret;
+
+	ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
+	if (ret) {
+		DRM_ERROR("timeout waiting for SB to idle before read\n");
+		return ret;
+	}
+
+	REG_WRITE(SB_ADDR, reg);
+	REG_WRITE(SB_PCKT,
+		   SET_FIELD(SB_OPCODE_READ, SB_OPCODE) |
+		   SET_FIELD(SB_DEST_DPLL, SB_DEST) |
+		   SET_FIELD(0xf, SB_BYTE_ENABLE));
+
+	ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
+	if (ret) {
+		DRM_ERROR("timeout waiting for SB to idle after read\n");
+		return ret;
+	}
+
+	*val = REG_READ(SB_DATA);
+
+	return 0;
+}
+
+static int cdv_sb_write(struct drm_device *dev, u32 reg, u32 val)
+{
+	int ret;
+	static bool dpio_debug = true;
+	u32 temp;
+
+	if (dpio_debug) {
+		if (cdv_sb_read(dev, reg, &temp) == 0)
+			DRM_DEBUG_KMS("0x%08x: 0x%08x (before)\n", reg, temp);
+		DRM_DEBUG_KMS("0x%08x: 0x%08x\n", reg, val);
+	}
+
+	ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
+	if (ret) {
+		DRM_ERROR("timeout waiting for SB to idle before write\n");
+		return ret;
+	}
+
+	REG_WRITE(SB_ADDR, reg);
+	REG_WRITE(SB_DATA, val);
+	REG_WRITE(SB_PCKT,
+		   SET_FIELD(SB_OPCODE_WRITE, SB_OPCODE) |
+		   SET_FIELD(SB_DEST_DPLL, SB_DEST) |
+		   SET_FIELD(0xf, SB_BYTE_ENABLE));
+
+	ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
+	if (ret) {
+		DRM_ERROR("timeout waiting for SB to idle after write\n");
+		return ret;
+	}
+
+	if (dpio_debug) {
+		if (cdv_sb_read(dev, reg, &temp) == 0)
+			DRM_DEBUG_KMS("0x%08x: 0x%08x (after)\n", reg, temp);
+	}
+
+	return 0;
+}
+
+/* Reset the DPIO configuration register.  The BIOS does this at every
+ * mode set.
+ */
+static void cdv_sb_reset(struct drm_device *dev)
+{
+
+	REG_WRITE(DPIO_CFG, 0);
+	REG_READ(DPIO_CFG);
+	REG_WRITE(DPIO_CFG, DPIO_MODE_SELECT_0 | DPIO_CMN_RESET_N);
+}
+
+/* Unlike most Intel display engines, on Cedarview the DPLL registers
+ * are behind this sideband bus.  They must be programmed while the
+ * DPLL reference clock is on in the DPLL control register, but before
+ * the DPLL is enabled in the DPLL control register.
+ */
+static int
+cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
+			       struct cdv_intel_clock_t *clock)
+{
+	struct psb_intel_crtc *psb_crtc =
+				to_psb_intel_crtc(crtc);
+	int pipe = psb_crtc->pipe;
+	u32 m, n_vco, p;
+	int ret = 0;
+	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+	u32 ref_value;
+
+	cdv_sb_reset(dev);
+
+	if ((REG_READ(dpll_reg) & DPLL_SYNCLOCK_ENABLE) == 0) {
+		DRM_ERROR("Attempting to set DPLL with refclk disabled\n");
+		return -EBUSY;
+	}
+
+	/* Follow the BIOS and write the REF/SFR Register. Hardcoded value */
+	ref_value = 0x68A701;
+
+	cdv_sb_write(dev, SB_REF_SFR(pipe), ref_value);
+
+	/* We don't know what the other fields of these regs are, so
+	 * leave them in place.
+	 */
+	ret = cdv_sb_read(dev, SB_M(pipe), &m);
+	if (ret)
+		return ret;
+	m &= ~SB_M_DIVIDER_MASK;
+	m |= ((clock->m2) << SB_M_DIVIDER_SHIFT);
+	ret = cdv_sb_write(dev, SB_M(pipe), m);
+	if (ret)
+		return ret;
+
+	ret = cdv_sb_read(dev, SB_N_VCO(pipe), &n_vco);
+	if (ret)
+		return ret;
+
+	/* Follow the BIOS to program the N_DIVIDER REG */
+	n_vco &= 0xFFFF;
+	n_vco |= 0x107;
+	n_vco &= ~(SB_N_VCO_SEL_MASK |
+		   SB_N_DIVIDER_MASK |
+		   SB_N_CB_TUNE_MASK);
+
+	n_vco |= ((clock->n) << SB_N_DIVIDER_SHIFT);
+
+	if (clock->vco < 2250000) {
+		n_vco |= (2 << SB_N_CB_TUNE_SHIFT);
+		n_vco |= (0 << SB_N_VCO_SEL_SHIFT);
+	} else if (clock->vco < 2750000) {
+		n_vco |= (1 << SB_N_CB_TUNE_SHIFT);
+		n_vco |= (1 << SB_N_VCO_SEL_SHIFT);
+	} else if (clock->vco < 3300000) {
+		n_vco |= (0 << SB_N_CB_TUNE_SHIFT);
+		n_vco |= (2 << SB_N_VCO_SEL_SHIFT);
+	} else {
+		n_vco |= (0 << SB_N_CB_TUNE_SHIFT);
+		n_vco |= (3 << SB_N_VCO_SEL_SHIFT);
+	}
+
+	ret = cdv_sb_write(dev, SB_N_VCO(pipe), n_vco);
+	if (ret)
+		return ret;
+
+	ret = cdv_sb_read(dev, SB_P(pipe), &p);
+	if (ret)
+		return ret;
+	p &= ~(SB_P2_DIVIDER_MASK | SB_P1_DIVIDER_MASK);
+	p |= SET_FIELD(clock->p1, SB_P1_DIVIDER);
+	switch (clock->p2) {
+	case 5:
+		p |= SET_FIELD(SB_P2_5, SB_P2_DIVIDER);
+		break;
+	case 10:
+		p |= SET_FIELD(SB_P2_10, SB_P2_DIVIDER);
+		break;
+	case 14:
+		p |= SET_FIELD(SB_P2_14, SB_P2_DIVIDER);
+		break;
+	case 7:
+		p |= SET_FIELD(SB_P2_7, SB_P2_DIVIDER);
+		break;
+	default:
+		DRM_ERROR("Bad P2 clock: %d\n", clock->p2);
+		return -EINVAL;
+	}
+	ret = cdv_sb_write(dev, SB_P(pipe), p);
+	if (ret)
+		return ret;
+
+	/* always Program the Lane Register for the Pipe A*/
+	if (pipe == 0) {
+		/* Program the Lane0/1 for HDMI B */
+		u32 lane_reg, lane_value;
+
+		lane_reg = PSB_LANE0;
+		cdv_sb_read(dev, lane_reg, &lane_value);
+		lane_value &= ~(LANE_PLL_MASK);
+		lane_value |= LANE_PLL_ENABLE;
+		cdv_sb_write(dev, lane_reg, lane_value);
+
+		lane_reg = PSB_LANE1;
+		cdv_sb_read(dev, lane_reg, &lane_value);
+		lane_value &= ~(LANE_PLL_MASK);
+		lane_value |= LANE_PLL_ENABLE;
+		cdv_sb_write(dev, lane_reg, lane_value);
+
+		/* Program the Lane2/3 for HDMI C */
+		lane_reg = PSB_LANE2;
+		cdv_sb_read(dev, lane_reg, &lane_value);
+		lane_value &= ~(LANE_PLL_MASK);
+		lane_value |= LANE_PLL_ENABLE;
+		cdv_sb_write(dev, lane_reg, lane_value);
+
+		lane_reg = PSB_LANE3;
+		cdv_sb_read(dev, lane_reg, &lane_value);
+		lane_value &= ~(LANE_PLL_MASK);
+		lane_value |= LANE_PLL_ENABLE;
+		cdv_sb_write(dev, lane_reg, lane_value);
+	}
+
+	return 0;
+}
+
+/*
+ * Returns whether any output on the specified pipe is of the specified type
+ */
+bool cdv_intel_pipe_has_type(struct drm_crtc *crtc, int type)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_connector *l_entry;
+
+	list_for_each_entry(l_entry, &mode_config->connector_list, head) {
+		if (l_entry->encoder && l_entry->encoder->crtc == crtc) {
+			struct psb_intel_output *psb_intel_output =
+			    to_psb_intel_output(l_entry);
+			if (psb_intel_output->type == type)
+				return true;
+		}
+	}
+	return false;
+}
+
+static const struct cdv_intel_limit_t *cdv_intel_limit(struct drm_crtc *crtc,
+							int refclk)
+{
+	const struct cdv_intel_limit_t *limit;
+	if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+		/*
+		 * Now only single-channel LVDS is supported on CDV. If it is
+		 * incorrect, please add the dual-channel LVDS.
+		 */
+		if (refclk == 96000)
+			limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_96];
+		else
+			limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_100];
+	} else {
+		if (refclk == 27000)
+			limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_27];
+		else
+			limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_96];
+	}
+	return limit;
+}
+
+/* m1 is reserved as 0 in CDV, n is a ring counter */
+static void cdv_intel_clock(struct drm_device *dev,
+			int refclk, struct cdv_intel_clock_t *clock)
+{
+	clock->m = clock->m2 + 2;
+	clock->p = clock->p1 * clock->p2;
+	clock->vco = (refclk * clock->m) / clock->n;
+	clock->dot = clock->vco / clock->p;
+}
+
+
+#define INTELPllInvalid(s)   { /* ErrorF (s) */; return false; }
+static bool cdv_intel_PLL_is_valid(struct drm_crtc *crtc,
+				const struct cdv_intel_limit_t *limit,
+			       struct cdv_intel_clock_t *clock)
+{
+	if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
+		INTELPllInvalid("p1 out of range\n");
+	if (clock->p < limit->p.min || limit->p.max < clock->p)
+		INTELPllInvalid("p out of range\n");
+	/* unnecessary to check the range of m(m1/M2)/n again */
+	if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
+		INTELPllInvalid("vco out of range\n");
+	/* XXX: We may need to be checking "Dot clock"
+	 * depending on the multiplier, connector, etc.,
+	 * rather than just a single range.
+	 */
+	if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
+		INTELPllInvalid("dot out of range\n");
+
+	return true;
+}
+
+static bool cdv_intel_find_best_PLL(struct drm_crtc *crtc, int target,
+				int refclk,
+				struct cdv_intel_clock_t *best_clock)
+{
+	struct drm_device *dev = crtc->dev;
+	struct cdv_intel_clock_t clock;
+	const struct cdv_intel_limit_t *limit = cdv_intel_limit(crtc, refclk);
+	int err = target;
+
+
+	if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	    (REG_READ(LVDS) & LVDS_PORT_EN) != 0) {
+		/*
+		 * For LVDS, if the panel is on, just rely on its current
+		 * settings for dual-channel.  We haven't figured out how to
+		 * reliably set up different single/dual channel state, if we
+		 * even can.
+		 */
+		if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+		    LVDS_CLKB_POWER_UP)
+			clock.p2 = limit->p2.p2_fast;
+		else
+			clock.p2 = limit->p2.p2_slow;
+	} else {
+		if (target < limit->p2.dot_limit)
+			clock.p2 = limit->p2.p2_slow;
+		else
+			clock.p2 = limit->p2.p2_fast;
+	}
+
+	memset(best_clock, 0, sizeof(*best_clock));
+	clock.m1 = 0;
+	/* m1 is reserved as 0 in CDV, n is a ring counter.
+	   So skip the m1 loop */
+	for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) {
+		for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max;
+					     clock.m2++) {
+			for (clock.p1 = limit->p1.min;
+					clock.p1 <= limit->p1.max;
+					clock.p1++) {
+				int this_err;
+
+				cdv_intel_clock(dev, refclk, &clock);
+
+				if (!cdv_intel_PLL_is_valid(crtc,
+								limit, &clock))
+						continue;
+
+				this_err = abs(clock.dot - target);
+				if (this_err < err) {
+					*best_clock = clock;
+					err = this_err;
+				}
+			}
+		}
+	}
+
+	return err != target;
+}
+
+int cdv_intel_pipe_set_base(struct drm_crtc *crtc,
+			    int x, int y, struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
+	int pipe = psb_intel_crtc->pipe;
+	unsigned long start, offset;
+	int dspbase = (pipe == 0 ? DSPABASE : DSPBBASE);
+	int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
+	int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
+	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+	u32 dspcntr;
+	int ret = 0;
+
+	if (!gma_power_begin(dev, true))
+		return 0;
+
+	/* no fb bound */
+	if (!crtc->fb) {
+		dev_err(dev->dev, "No FB bound\n");
+		goto psb_intel_pipe_cleaner;
+	}
+
+
+	/* We are displaying this buffer, make sure it is actually loaded
+	   into the GTT */
+	ret = psb_gtt_pin(psbfb->gtt);
+	if (ret < 0)
+		goto psb_intel_pipe_set_base_exit;
+	start = psbfb->gtt->offset;
+	offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
+
+	REG_WRITE(dspstride, crtc->fb->pitch);
+
+	dspcntr = REG_READ(dspcntr_reg);
+	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+
+	switch (crtc->fb->bits_per_pixel) {
+	case 8:
+		dspcntr |= DISPPLANE_8BPP;
+		break;
+	case 16:
+		if (crtc->fb->depth == 15)
+			dspcntr |= DISPPLANE_15_16BPP;
+		else
+			dspcntr |= DISPPLANE_16BPP;
+		break;
+	case 24:
+	case 32:
+		dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+		break;
+	default:
+		dev_err(dev->dev, "Unknown color depth\n");
+		ret = -EINVAL;
+		goto psb_intel_pipe_set_base_exit;
+	}
+	REG_WRITE(dspcntr_reg, dspcntr);
+
+	dev_dbg(dev->dev,
+		"Writing base %08lX %08lX %d %d\n", start, offset, x, y);
+
+	REG_WRITE(dspbase, offset);
+	REG_READ(dspbase);
+	REG_WRITE(dspsurf, start);
+	REG_READ(dspsurf);
+
+psb_intel_pipe_cleaner:
+	/* If there was a previous display we can now unpin it */
+	if (old_fb)
+		psb_gtt_unpin(to_psb_fb(old_fb)->gtt);
+
+psb_intel_pipe_set_base_exit:
+	gma_power_end(dev);
+	return ret;
+}
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ *
+ * This code should probably grow support for turning the cursor off and back
+ * on appropriately at the same time as we're turning the pipe off/on.
+ */
+static void cdv_intel_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int pipe = psb_intel_crtc->pipe;
+	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+	int dspbase_reg = (pipe == 0) ? DSPABASE : DSPBBASE;
+	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+	u32 temp;
+	bool enabled;
+
+	/* XXX: When our outputs are all unaware of DPMS modes other than off
+	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+	 */
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+		/* Enable the DPLL */
+		temp = REG_READ(dpll_reg);
+		if ((temp & DPLL_VCO_ENABLE) == 0) {
+			REG_WRITE(dpll_reg, temp);
+			REG_READ(dpll_reg);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+			REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+			REG_READ(dpll_reg);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+			REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+			REG_READ(dpll_reg);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+		}
+
+		/* Jim Bish - switch plan and pipe per scott */
+		/* Enable the plane */
+		temp = REG_READ(dspcntr_reg);
+		if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+			REG_WRITE(dspcntr_reg,
+				  temp | DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+		}
+
+		udelay(150);
+
+		/* Enable the pipe */
+		temp = REG_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_ENABLE) == 0)
+			REG_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
+
+		psb_intel_crtc_load_lut(crtc);
+
+		/* Give the overlay scaler a chance to enable
+		 * if it's on this pipe */
+		/* psb_intel_crtc_dpms_video(crtc, true); TODO */
+		break;
+	case DRM_MODE_DPMS_OFF:
+		/* Give the overlay scaler a chance to disable
+		 * if it's on this pipe */
+		/* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
+
+		/* Disable the VGA plane that we never use */
+		REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+
+		/* Jim Bish - changed pipe/plane here as well. */
+
+		/* Wait for vblank for the disable to take effect */
+		cdv_intel_wait_for_vblank(dev);
+
+		/* Next, disable display pipes */
+		temp = REG_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_ENABLE) != 0) {
+			REG_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
+			REG_READ(pipeconf_reg);
+		}
+
+		/* Wait for vblank for the disable to take effect. */
+		cdv_intel_wait_for_vblank(dev);
+
+		udelay(150);
+
+		/* Disable display plane */
+		temp = REG_READ(dspcntr_reg);
+		if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+			REG_WRITE(dspcntr_reg,
+				  temp & ~DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+			REG_READ(dspbase_reg);
+		}
+
+		temp = REG_READ(dpll_reg);
+		if ((temp & DPLL_VCO_ENABLE) != 0) {
+			REG_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
+			REG_READ(dpll_reg);
+		}
+
+		/* Wait for the clocks to turn off. */
+		udelay(150);
+		break;
+	}
+	enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
+	/*Set FIFO Watermarks*/
+	REG_WRITE(DSPARB, 0x3F3E);
+}
+
+static void cdv_intel_crtc_prepare(struct drm_crtc *crtc)
+{
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+static void cdv_intel_crtc_commit(struct drm_crtc *crtc)
+{
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+void cdv_intel_encoder_prepare(struct drm_encoder *encoder)
+{
+	struct drm_encoder_helper_funcs *encoder_funcs =
+	    encoder->helper_private;
+	/* lvds has its own version of prepare see cdv_intel_lvds_prepare */
+	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+void cdv_intel_encoder_commit(struct drm_encoder *encoder)
+{
+	struct drm_encoder_helper_funcs *encoder_funcs =
+	    encoder->helper_private;
+	/* lvds has its own version of commit see cdv_intel_lvds_commit */
+	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+}
+
+static bool cdv_intel_crtc_mode_fixup(struct drm_crtc *crtc,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+
+/**
+ * Return the pipe currently connected to the panel fitter,
+ * or -1 if the panel fitter is not present or not in use
+ */
+static int cdv_intel_panel_fitter_pipe(struct drm_device *dev)
+{
+	u32 pfit_control;
+
+	pfit_control = REG_READ(PFIT_CONTROL);
+
+	/* See if the panel fitter is in use */
+	if ((pfit_control & PFIT_ENABLE) == 0)
+		return -1;
+	return (pfit_control >> 29) & 0x3;
+}
+
+static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode,
+			       int x, int y,
+			       struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int pipe = psb_intel_crtc->pipe;
+	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+	int dpll_md_reg = (psb_intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
+	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+	int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
+	int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
+	int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
+	int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
+	int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
+	int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
+	int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
+	int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
+	int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
+	int refclk;
+	struct cdv_intel_clock_t clock;
+	u32 dpll = 0, dspcntr, pipeconf;
+	bool ok, is_sdvo = false, is_dvo = false;
+	bool is_crt = false, is_lvds = false, is_tv = false;
+	bool is_hdmi = false;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_connector *connector;
+
+	list_for_each_entry(connector, &mode_config->connector_list, head) {
+		struct psb_intel_output *psb_intel_output =
+		    to_psb_intel_output(connector);
+
+		if (!connector->encoder
+		    || connector->encoder->crtc != crtc)
+			continue;
+
+		switch (psb_intel_output->type) {
+		case INTEL_OUTPUT_LVDS:
+			is_lvds = true;
+			break;
+		case INTEL_OUTPUT_SDVO:
+			is_sdvo = true;
+			break;
+		case INTEL_OUTPUT_DVO:
+			is_dvo = true;
+			break;
+		case INTEL_OUTPUT_TVOUT:
+			is_tv = true;
+			break;
+		case INTEL_OUTPUT_ANALOG:
+			is_crt = true;
+			break;
+		case INTEL_OUTPUT_HDMI:
+			is_hdmi = true;
+			break;
+		}
+	}
+
+	refclk = 96000;
+
+	/* Hack selection about ref clk for CRT */
+	/* Select 27MHz as the reference clk for HDMI */
+	if (is_crt || is_hdmi)
+		refclk = 27000;
+
+	drm_mode_debug_printmodeline(adjusted_mode);
+
+	ok = cdv_intel_find_best_PLL(crtc, adjusted_mode->clock, refclk,
+				 &clock);
+	if (!ok) {
+		dev_err(dev->dev, "Couldn't find PLL settings for mode!\n");
+		return 0;
+	}
+
+	dpll = DPLL_VGA_MODE_DIS;
+	if (is_tv) {
+		/* XXX: just matching BIOS for now */
+/*	dpll |= PLL_REF_INPUT_TVCLKINBC; */
+		dpll |= 3;
+	}
+		dpll |= PLL_REF_INPUT_DREFCLK;
+
+	dpll |= DPLL_SYNCLOCK_ENABLE;
+	dpll |= DPLL_VGA_MODE_DIS;
+	if (is_lvds)
+		dpll |= DPLLB_MODE_LVDS;
+	else
+		dpll |= DPLLB_MODE_DAC_SERIAL;
+	/* dpll |= (2 << 11); */
+
+	/* setup pipeconf */
+	pipeconf = REG_READ(pipeconf_reg);
+
+	/* Set up the display plane register */
+	dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+	if (pipe == 0)
+		dspcntr |= DISPPLANE_SEL_PIPE_A;
+	else
+		dspcntr |= DISPPLANE_SEL_PIPE_B;
+
+	dspcntr |= DISPLAY_PLANE_ENABLE;
+	pipeconf |= PIPEACONF_ENABLE;
+
+	REG_WRITE(dpll_reg, dpll | DPLL_VGA_MODE_DIS | DPLL_SYNCLOCK_ENABLE);
+	REG_READ(dpll_reg);
+
+	cdv_dpll_set_clock_cdv(dev, crtc, &clock);
+
+	udelay(150);
+
+
+	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
+	 * This is an exception to the general rule that mode_set doesn't turn
+	 * things on.
+	 */
+	if (is_lvds) {
+		u32 lvds = REG_READ(LVDS);
+
+		lvds |=
+		    LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP |
+		    LVDS_PIPEB_SELECT;
+		/* Set the B0-B3 data pairs corresponding to
+		 * whether we're going to
+		 * set the DPLLs for dual-channel mode or not.
+		 */
+		if (clock.p2 == 7)
+			lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+		else
+			lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+		/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+		 * appropriately here, but we need to look more
+		 * thoroughly into how panels behave in the two modes.
+		 */
+
+		REG_WRITE(LVDS, lvds);
+		REG_READ(LVDS);
+	}
+
+	dpll |= DPLL_VCO_ENABLE;
+
+	/* Disable the panel fitter if it was on our pipe */
+	if (cdv_intel_panel_fitter_pipe(dev) == pipe)
+		REG_WRITE(PFIT_CONTROL, 0);
+
+	DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+	drm_mode_debug_printmodeline(mode);
+
+	REG_WRITE(dpll_reg,
+		(REG_READ(dpll_reg) & ~DPLL_LOCK) | DPLL_VCO_ENABLE);
+	REG_READ(dpll_reg);
+	/* Wait for the clocks to stabilize. */
+	udelay(150); /* 42 usec w/o calibration, 110 with.  rounded up. */
+
+	if (!(REG_READ(dpll_reg) & DPLL_LOCK)) {
+		dev_err(dev->dev, "Failed to get DPLL lock\n");
+		return -EBUSY;
+	}
+
+	{
+		int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+		REG_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
+	}
+
+	REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
+		  ((adjusted_mode->crtc_htotal - 1) << 16));
+	REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
+		  ((adjusted_mode->crtc_hblank_end - 1) << 16));
+	REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
+		  ((adjusted_mode->crtc_hsync_end - 1) << 16));
+	REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
+		  ((adjusted_mode->crtc_vtotal - 1) << 16));
+	REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
+		  ((adjusted_mode->crtc_vblank_end - 1) << 16));
+	REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
+		  ((adjusted_mode->crtc_vsync_end - 1) << 16));
+	/* pipesrc and dspsize control the size that is scaled from,
+	 * which should always be the user's requested size.
+	 */
+	REG_WRITE(dspsize_reg,
+		  ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
+	REG_WRITE(dsppos_reg, 0);
+	REG_WRITE(pipesrc_reg,
+		  ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+	REG_WRITE(pipeconf_reg, pipeconf);
+	REG_READ(pipeconf_reg);
+
+	cdv_intel_wait_for_vblank(dev);
+
+	REG_WRITE(dspcntr_reg, dspcntr);
+
+	/* Flush the plane changes */
+	{
+		struct drm_crtc_helper_funcs *crtc_funcs =
+		    crtc->helper_private;
+		crtc_funcs->mode_set_base(crtc, x, y, old_fb);
+	}
+
+	cdv_intel_wait_for_vblank(dev);
+
+	return 0;
+}
+
+/** Loads the palette/gamma unit for the CRTC with the prepared values */
+void cdv_intel_crtc_load_lut(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_psb_private *dev_priv =
+				(struct drm_psb_private *)dev->dev_private;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int palreg = PALETTE_A;
+	int i;
+
+	/* The clocks have to be on to load the palette. */
+	if (!crtc->enabled)
+		return;
+
+	switch (psb_intel_crtc->pipe) {
+	case 0:
+		break;
+	case 1:
+		palreg = PALETTE_B;
+		break;
+	case 2:
+		palreg = PALETTE_C;
+		break;
+	default:
+		dev_err(dev->dev, "Illegal Pipe Number.\n");
+		return;
+	}
+
+	if (gma_power_begin(dev, false)) {
+		for (i = 0; i < 256; i++) {
+			REG_WRITE(palreg + 4 * i,
+				  ((psb_intel_crtc->lut_r[i] +
+				  psb_intel_crtc->lut_adj[i]) << 16) |
+				  ((psb_intel_crtc->lut_g[i] +
+				  psb_intel_crtc->lut_adj[i]) << 8) |
+				  (psb_intel_crtc->lut_b[i] +
+				  psb_intel_crtc->lut_adj[i]));
+		}
+		gma_power_end(dev);
+	} else {
+		for (i = 0; i < 256; i++) {
+			dev_priv->save_palette_a[i] =
+				  ((psb_intel_crtc->lut_r[i] +
+				  psb_intel_crtc->lut_adj[i]) << 16) |
+				  ((psb_intel_crtc->lut_g[i] +
+				  psb_intel_crtc->lut_adj[i]) << 8) |
+				  (psb_intel_crtc->lut_b[i] +
+				  psb_intel_crtc->lut_adj[i]);
+		}
+
+	}
+}
+
+/**
+ * Save HW states of giving crtc
+ */
+static void cdv_intel_crtc_save(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	/* struct drm_psb_private *dev_priv =
+			(struct drm_psb_private *)dev->dev_private; */
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state;
+	int pipeA = (psb_intel_crtc->pipe == 0);
+	uint32_t paletteReg;
+	int i;
+
+	if (!crtc_state) {
+		dev_dbg(dev->dev, "No CRTC state found\n");
+		return;
+	}
+
+	crtc_state->saveDSPCNTR = REG_READ(pipeA ? DSPACNTR : DSPBCNTR);
+	crtc_state->savePIPECONF = REG_READ(pipeA ? PIPEACONF : PIPEBCONF);
+	crtc_state->savePIPESRC = REG_READ(pipeA ? PIPEASRC : PIPEBSRC);
+	crtc_state->saveFP0 = REG_READ(pipeA ? FPA0 : FPB0);
+	crtc_state->saveFP1 = REG_READ(pipeA ? FPA1 : FPB1);
+	crtc_state->saveDPLL = REG_READ(pipeA ? DPLL_A : DPLL_B);
+	crtc_state->saveHTOTAL = REG_READ(pipeA ? HTOTAL_A : HTOTAL_B);
+	crtc_state->saveHBLANK = REG_READ(pipeA ? HBLANK_A : HBLANK_B);
+	crtc_state->saveHSYNC = REG_READ(pipeA ? HSYNC_A : HSYNC_B);
+	crtc_state->saveVTOTAL = REG_READ(pipeA ? VTOTAL_A : VTOTAL_B);
+	crtc_state->saveVBLANK = REG_READ(pipeA ? VBLANK_A : VBLANK_B);
+	crtc_state->saveVSYNC = REG_READ(pipeA ? VSYNC_A : VSYNC_B);
+	crtc_state->saveDSPSTRIDE = REG_READ(pipeA ? DSPASTRIDE : DSPBSTRIDE);
+
+	/*NOTE: DSPSIZE DSPPOS only for psb*/
+	crtc_state->saveDSPSIZE = REG_READ(pipeA ? DSPASIZE : DSPBSIZE);
+	crtc_state->saveDSPPOS = REG_READ(pipeA ? DSPAPOS : DSPBPOS);
+
+	crtc_state->saveDSPBASE = REG_READ(pipeA ? DSPABASE : DSPBBASE);
+
+	DRM_DEBUG("(%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n",
+			crtc_state->saveDSPCNTR,
+			crtc_state->savePIPECONF,
+			crtc_state->savePIPESRC,
+			crtc_state->saveFP0,
+			crtc_state->saveFP1,
+			crtc_state->saveDPLL,
+			crtc_state->saveHTOTAL,
+			crtc_state->saveHBLANK,
+			crtc_state->saveHSYNC,
+			crtc_state->saveVTOTAL,
+			crtc_state->saveVBLANK,
+			crtc_state->saveVSYNC,
+			crtc_state->saveDSPSTRIDE,
+			crtc_state->saveDSPSIZE,
+			crtc_state->saveDSPPOS,
+			crtc_state->saveDSPBASE
+		);
+
+	paletteReg = pipeA ? PALETTE_A : PALETTE_B;
+	for (i = 0; i < 256; ++i)
+		crtc_state->savePalette[i] = REG_READ(paletteReg + (i << 2));
+}
+
+/**
+ * Restore HW states of giving crtc
+ */
+static void cdv_intel_crtc_restore(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	/* struct drm_psb_private * dev_priv =
+				(struct drm_psb_private *)dev->dev_private; */
+	struct psb_intel_crtc *psb_intel_crtc =  to_psb_intel_crtc(crtc);
+	struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state;
+	/* struct drm_crtc_helper_funcs * crtc_funcs = crtc->helper_private; */
+	int pipeA = (psb_intel_crtc->pipe == 0);
+	uint32_t paletteReg;
+	int i;
+
+	if (!crtc_state) {
+		dev_dbg(dev->dev, "No crtc state\n");
+		return;
+	}
+
+	DRM_DEBUG(
+		"current:(%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n",
+		REG_READ(pipeA ? DSPACNTR : DSPBCNTR),
+		REG_READ(pipeA ? PIPEACONF : PIPEBCONF),
+		REG_READ(pipeA ? PIPEASRC : PIPEBSRC),
+		REG_READ(pipeA ? FPA0 : FPB0),
+		REG_READ(pipeA ? FPA1 : FPB1),
+		REG_READ(pipeA ? DPLL_A : DPLL_B),
+		REG_READ(pipeA ? HTOTAL_A : HTOTAL_B),
+		REG_READ(pipeA ? HBLANK_A : HBLANK_B),
+		REG_READ(pipeA ? HSYNC_A : HSYNC_B),
+		REG_READ(pipeA ? VTOTAL_A : VTOTAL_B),
+		REG_READ(pipeA ? VBLANK_A : VBLANK_B),
+		REG_READ(pipeA ? VSYNC_A : VSYNC_B),
+		REG_READ(pipeA ? DSPASTRIDE : DSPBSTRIDE),
+		REG_READ(pipeA ? DSPASIZE : DSPBSIZE),
+		REG_READ(pipeA ? DSPAPOS : DSPBPOS),
+		REG_READ(pipeA ? DSPABASE : DSPBBASE)
+		);
+
+	DRM_DEBUG(
+		"saved: (%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n",
+		crtc_state->saveDSPCNTR,
+		crtc_state->savePIPECONF,
+		crtc_state->savePIPESRC,
+		crtc_state->saveFP0,
+		crtc_state->saveFP1,
+		crtc_state->saveDPLL,
+		crtc_state->saveHTOTAL,
+		crtc_state->saveHBLANK,
+		crtc_state->saveHSYNC,
+		crtc_state->saveVTOTAL,
+		crtc_state->saveVBLANK,
+		crtc_state->saveVSYNC,
+		crtc_state->saveDSPSTRIDE,
+		crtc_state->saveDSPSIZE,
+		crtc_state->saveDSPPOS,
+		crtc_state->saveDSPBASE
+		);
+
+
+	if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) {
+		REG_WRITE(pipeA ? DPLL_A : DPLL_B,
+			crtc_state->saveDPLL & ~DPLL_VCO_ENABLE);
+		REG_READ(pipeA ? DPLL_A : DPLL_B);
+		DRM_DEBUG("write dpll: %x\n",
+				REG_READ(pipeA ? DPLL_A : DPLL_B));
+		udelay(150);
+	}
+
+	REG_WRITE(pipeA ? FPA0 : FPB0, crtc_state->saveFP0);
+	REG_READ(pipeA ? FPA0 : FPB0);
+
+	REG_WRITE(pipeA ? FPA1 : FPB1, crtc_state->saveFP1);
+	REG_READ(pipeA ? FPA1 : FPB1);
+
+	REG_WRITE(pipeA ? DPLL_A : DPLL_B, crtc_state->saveDPLL);
+	REG_READ(pipeA ? DPLL_A : DPLL_B);
+	udelay(150);
+
+	REG_WRITE(pipeA ? HTOTAL_A : HTOTAL_B, crtc_state->saveHTOTAL);
+	REG_WRITE(pipeA ? HBLANK_A : HBLANK_B, crtc_state->saveHBLANK);
+	REG_WRITE(pipeA ? HSYNC_A : HSYNC_B, crtc_state->saveHSYNC);
+	REG_WRITE(pipeA ? VTOTAL_A : VTOTAL_B, crtc_state->saveVTOTAL);
+	REG_WRITE(pipeA ? VBLANK_A : VBLANK_B, crtc_state->saveVBLANK);
+	REG_WRITE(pipeA ? VSYNC_A : VSYNC_B, crtc_state->saveVSYNC);
+	REG_WRITE(pipeA ? DSPASTRIDE : DSPBSTRIDE, crtc_state->saveDSPSTRIDE);
+
+	REG_WRITE(pipeA ? DSPASIZE : DSPBSIZE, crtc_state->saveDSPSIZE);
+	REG_WRITE(pipeA ? DSPAPOS : DSPBPOS, crtc_state->saveDSPPOS);
+
+	REG_WRITE(pipeA ? PIPEASRC : PIPEBSRC, crtc_state->savePIPESRC);
+	REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE);
+	REG_WRITE(pipeA ? PIPEACONF : PIPEBCONF, crtc_state->savePIPECONF);
+
+	cdv_intel_wait_for_vblank(dev);
+
+	REG_WRITE(pipeA ? DSPACNTR : DSPBCNTR, crtc_state->saveDSPCNTR);
+	REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE);
+
+	cdv_intel_wait_for_vblank(dev);
+
+	paletteReg = pipeA ? PALETTE_A : PALETTE_B;
+	for (i = 0; i < 256; ++i)
+		REG_WRITE(paletteReg + (i << 2), crtc_state->savePalette[i]);
+}
+
+static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc,
+				 struct drm_file *file_priv,
+				 uint32_t handle,
+				 uint32_t width, uint32_t height)
+{
+	struct drm_device *dev = crtc->dev;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int pipe = psb_intel_crtc->pipe;
+	uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
+	uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
+	uint32_t temp;
+	size_t addr = 0;
+	struct gtt_range *gt;
+	struct drm_gem_object *obj;
+	int ret;
+
+	/* if we want to turn of the cursor ignore width and height */
+	if (!handle) {
+		/* turn off the cursor */
+		temp = CURSOR_MODE_DISABLE;
+
+		if (gma_power_begin(dev, false)) {
+			REG_WRITE(control, temp);
+			REG_WRITE(base, 0);
+			gma_power_end(dev);
+		}
+
+		/* unpin the old GEM object */
+		if (psb_intel_crtc->cursor_obj) {
+			gt = container_of(psb_intel_crtc->cursor_obj,
+							struct gtt_range, gem);
+			psb_gtt_unpin(gt);
+			drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
+			psb_intel_crtc->cursor_obj = NULL;
+		}
+
+		return 0;
+	}
+
+	/* Currently we only support 64x64 cursors */
+	if (width != 64 || height != 64) {
+		dev_dbg(dev->dev, "we currently only support 64x64 cursors\n");
+		return -EINVAL;
+	}
+
+	obj = drm_gem_object_lookup(dev, file_priv, handle);
+	if (!obj)
+		return -ENOENT;
+
+	if (obj->size < width * height * 4) {
+		dev_dbg(dev->dev, "buffer is to small\n");
+		return -ENOMEM;
+	}
+
+	gt = container_of(obj, struct gtt_range, gem);
+
+	/* Pin the memory into the GTT */
+	ret = psb_gtt_pin(gt);
+	if (ret) {
+		dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
+		return ret;
+	}
+
+	addr = gt->offset;	/* Or resource.start ??? */
+
+	psb_intel_crtc->cursor_addr = addr;
+
+	temp = 0;
+	/* set the pipe for the cursor */
+	temp |= (pipe << 28);
+	temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+
+	if (gma_power_begin(dev, false)) {
+		REG_WRITE(control, temp);
+		REG_WRITE(base, addr);
+		gma_power_end(dev);
+	}
+
+	/* unpin the old GEM object */
+	if (psb_intel_crtc->cursor_obj) {
+		gt = container_of(psb_intel_crtc->cursor_obj,
+							struct gtt_range, gem);
+		psb_gtt_unpin(gt);
+		drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
+		psb_intel_crtc->cursor_obj = obj;
+	}
+	return 0;
+}
+
+static int cdv_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
+{
+	struct drm_device *dev = crtc->dev;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int pipe = psb_intel_crtc->pipe;
+	uint32_t temp = 0;
+	uint32_t adder;
+
+
+	if (x < 0) {
+		temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
+		x = -x;
+	}
+	if (y < 0) {
+		temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
+		y = -y;
+	}
+
+	temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
+	temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
+
+	adder = psb_intel_crtc->cursor_addr;
+
+	if (gma_power_begin(dev, false)) {
+		REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
+		REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder);
+		gma_power_end(dev);
+	}
+	return 0;
+}
+
+static void cdv_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red,
+			 u16 *green, u16 *blue, uint32_t start, uint32_t size)
+{
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int i;
+	int end = (start + size > 256) ? 256 : start + size;
+
+	for (i = start; i < end; i++) {
+		psb_intel_crtc->lut_r[i] = red[i] >> 8;
+		psb_intel_crtc->lut_g[i] = green[i] >> 8;
+		psb_intel_crtc->lut_b[i] = blue[i] >> 8;
+	}
+
+	cdv_intel_crtc_load_lut(crtc);
+}
+
+static int cdv_crtc_set_config(struct drm_mode_set *set)
+{
+	int ret = 0;
+	struct drm_device *dev = set->crtc->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (!dev_priv->rpm_enabled)
+		return drm_crtc_helper_set_config(set);
+
+	pm_runtime_forbid(&dev->pdev->dev);
+
+	ret = drm_crtc_helper_set_config(set);
+
+	pm_runtime_allow(&dev->pdev->dev);
+
+	return ret;
+}
+
+/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
+
+/* FIXME: why are we using this, should it be cdv_ in this tree ? */
+
+static void i8xx_clock(int refclk, struct cdv_intel_clock_t *clock)
+{
+	clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
+	clock->p = clock->p1 * clock->p2;
+	clock->vco = refclk * clock->m / (clock->n + 2);
+	clock->dot = clock->vco / clock->p;
+}
+
+/* Returns the clock of the currently programmed mode of the given pipe. */
+static int cdv_intel_crtc_clock_get(struct drm_device *dev,
+				struct drm_crtc *crtc)
+{
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int pipe = psb_intel_crtc->pipe;
+	u32 dpll;
+	u32 fp;
+	struct cdv_intel_clock_t clock;
+	bool is_lvds;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (gma_power_begin(dev, false)) {
+		dpll = REG_READ((pipe == 0) ? DPLL_A : DPLL_B);
+		if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
+			fp = REG_READ((pipe == 0) ? FPA0 : FPB0);
+		else
+			fp = REG_READ((pipe == 0) ? FPA1 : FPB1);
+		is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN);
+		gma_power_end(dev);
+	} else {
+		dpll = (pipe == 0) ?
+			dev_priv->saveDPLL_A : dev_priv->saveDPLL_B;
+
+		if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
+			fp = (pipe == 0) ?
+				dev_priv->saveFPA0 :
+				dev_priv->saveFPB0;
+		else
+			fp = (pipe == 0) ?
+				dev_priv->saveFPA1 :
+				dev_priv->saveFPB1;
+
+		is_lvds = (pipe == 1) && (dev_priv->saveLVDS & LVDS_PORT_EN);
+	}
+
+	clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
+	clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
+	clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
+
+	if (is_lvds) {
+		clock.p1 =
+		    ffs((dpll &
+			 DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
+			DPLL_FPA01_P1_POST_DIV_SHIFT);
+		if (clock.p1 == 0) {
+			clock.p1 = 4;
+			dev_err(dev->dev, "PLL %d\n", dpll);
+		}
+		clock.p2 = 14;
+
+		if ((dpll & PLL_REF_INPUT_MASK) ==
+		    PLLB_REF_INPUT_SPREADSPECTRUMIN) {
+			/* XXX: might not be 66MHz */
+			i8xx_clock(66000, &clock);
+		} else
+			i8xx_clock(48000, &clock);
+	} else {
+		if (dpll & PLL_P1_DIVIDE_BY_TWO)
+			clock.p1 = 2;
+		else {
+			clock.p1 =
+			    ((dpll &
+			      DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
+			     DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
+		}
+		if (dpll & PLL_P2_DIVIDE_BY_4)
+			clock.p2 = 4;
+		else
+			clock.p2 = 2;
+
+		i8xx_clock(48000, &clock);
+	}
+
+	/* XXX: It would be nice to validate the clocks, but we can't reuse
+	 * i830PllIsValid() because it relies on the xf86_config connector
+	 * configuration being accurate, which it isn't necessarily.
+	 */
+
+	return clock.dot;
+}
+
+/** Returns the currently programmed mode of the given pipe. */
+struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev,
+					     struct drm_crtc *crtc)
+{
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int pipe = psb_intel_crtc->pipe;
+	struct drm_display_mode *mode;
+	int htot;
+	int hsync;
+	int vtot;
+	int vsync;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (gma_power_begin(dev, false)) {
+		htot = REG_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B);
+		hsync = REG_READ((pipe == 0) ? HSYNC_A : HSYNC_B);
+		vtot = REG_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B);
+		vsync = REG_READ((pipe == 0) ? VSYNC_A : VSYNC_B);
+		gma_power_end(dev);
+	} else {
+		htot = (pipe == 0) ?
+			dev_priv->saveHTOTAL_A : dev_priv->saveHTOTAL_B;
+		hsync = (pipe == 0) ?
+			dev_priv->saveHSYNC_A : dev_priv->saveHSYNC_B;
+		vtot = (pipe == 0) ?
+			dev_priv->saveVTOTAL_A : dev_priv->saveVTOTAL_B;
+		vsync = (pipe == 0) ?
+			dev_priv->saveVSYNC_A : dev_priv->saveVSYNC_B;
+	}
+
+	mode = kzalloc(sizeof(*mode), GFP_KERNEL);
+	if (!mode)
+		return NULL;
+
+	mode->clock = cdv_intel_crtc_clock_get(dev, crtc);
+	mode->hdisplay = (htot & 0xffff) + 1;
+	mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
+	mode->hsync_start = (hsync & 0xffff) + 1;
+	mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
+	mode->vdisplay = (vtot & 0xffff) + 1;
+	mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
+	mode->vsync_start = (vsync & 0xffff) + 1;
+	mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
+
+	drm_mode_set_name(mode);
+	drm_mode_set_crtcinfo(mode, 0);
+
+	return mode;
+}
+
+static void cdv_intel_crtc_destroy(struct drm_crtc *crtc)
+{
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+
+	kfree(psb_intel_crtc->crtc_state);
+	drm_crtc_cleanup(crtc);
+	kfree(psb_intel_crtc);
+}
+
+const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = {
+	.dpms = cdv_intel_crtc_dpms,
+	.mode_fixup = cdv_intel_crtc_mode_fixup,
+	.mode_set = cdv_intel_crtc_mode_set,
+	.mode_set_base = cdv_intel_pipe_set_base,
+	.prepare = cdv_intel_crtc_prepare,
+	.commit = cdv_intel_crtc_commit,
+};
+
+const struct drm_crtc_funcs cdv_intel_crtc_funcs = {
+	.save = cdv_intel_crtc_save,
+	.restore = cdv_intel_crtc_restore,
+	.cursor_set = cdv_intel_crtc_cursor_set,
+	.cursor_move = cdv_intel_crtc_cursor_move,
+	.gamma_set = cdv_intel_crtc_gamma_set,
+	.set_config = cdv_crtc_set_config,
+	.destroy = cdv_intel_crtc_destroy,
+};
+
+/*
+ * Set the default value of cursor control and base register
+ * to zero. This is a workaround for h/w defect on oaktrail
+ */
+void cdv_intel_cursor_init(struct drm_device *dev, int pipe)
+{
+	uint32_t control;
+	uint32_t base;
+
+	switch (pipe) {
+	case 0:
+		control = CURACNTR;
+		base = CURABASE;
+		break;
+	case 1:
+		control = CURBCNTR;
+		base = CURBBASE;
+		break;
+	case 2:
+		control = CURCCNTR;
+		base = CURCBASE;
+		break;
+	default:
+		return;
+	}
+
+	REG_WRITE(control, 0);
+	REG_WRITE(base, 0);
+}
+
diff --git a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
new file mode 100644
index 0000000..cbca2b0
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
@@ -0,0 +1,376 @@
+/*
+ * Copyright © 2006-2011 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	jim liu <jim.liu@intel.com>
+ *
+ * FIXME:
+ *	We should probably make this generic and share it with Medfield
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_edid.h>
+#include "psb_intel_drv.h"
+#include "psb_drv.h"
+#include "psb_intel_reg.h"
+#include <linux/pm_runtime.h>
+
+/* hdmi control bits */
+#define HDMI_NULL_PACKETS_DURING_VSYNC	(1 << 9)
+#define HDMI_BORDER_ENABLE		(1 << 7)
+#define HDMI_AUDIO_ENABLE		(1 << 6)
+#define HDMI_VSYNC_ACTIVE_HIGH		(1 << 4)
+#define HDMI_HSYNC_ACTIVE_HIGH		(1 << 3)
+/* hdmi-b control bits */
+#define	HDMIB_PIPE_B_SELECT		(1 << 30)
+
+
+struct mid_intel_hdmi_priv {
+	u32 hdmi_reg;
+	u32 save_HDMIB;
+	bool has_hdmi_sink;
+	bool has_hdmi_audio;
+	/* Should set this when detect hotplug */
+	bool hdmi_device_connected;
+	struct mdfld_hdmi_i2c *i2c_bus;
+	struct i2c_adapter *hdmi_i2c_adapter;	/* for control functions */
+	struct drm_device *dev;
+};
+
+static void cdv_hdmi_mode_set(struct drm_encoder *encoder,
+			struct drm_display_mode *mode,
+			struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
+	u32 hdmib;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct psb_intel_crtc *intel_crtc = to_psb_intel_crtc(crtc);
+
+	hdmib = (2 << 10);
+
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		hdmib |= HDMI_VSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		hdmib |= HDMI_HSYNC_ACTIVE_HIGH;
+
+	if (intel_crtc->pipe == 1)
+		hdmib |= HDMIB_PIPE_B_SELECT;
+
+	if (hdmi_priv->has_hdmi_audio) {
+		hdmib |= HDMI_AUDIO_ENABLE;
+		hdmib |= HDMI_NULL_PACKETS_DURING_VSYNC;
+	}
+
+	REG_WRITE(hdmi_priv->hdmi_reg, hdmib);
+	REG_READ(hdmi_priv->hdmi_reg);
+}
+
+static bool cdv_hdmi_mode_fixup(struct drm_encoder *encoder,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static void cdv_hdmi_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
+	u32 hdmib;
+
+	hdmib = REG_READ(hdmi_priv->hdmi_reg);
+
+	if (mode != DRM_MODE_DPMS_ON)
+		REG_WRITE(hdmi_priv->hdmi_reg, hdmib & ~HDMIB_PORT_EN);
+	else
+		REG_WRITE(hdmi_priv->hdmi_reg, hdmib | HDMIB_PORT_EN);
+	REG_READ(hdmi_priv->hdmi_reg);
+}
+
+static void cdv_hdmi_save(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct psb_intel_output *output = to_psb_intel_output(connector);
+	struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
+
+	hdmi_priv->save_HDMIB = REG_READ(hdmi_priv->hdmi_reg);
+}
+
+static void cdv_hdmi_restore(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct psb_intel_output *output = to_psb_intel_output(connector);
+	struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
+
+	REG_WRITE(hdmi_priv->hdmi_reg, hdmi_priv->save_HDMIB);
+	REG_READ(hdmi_priv->hdmi_reg);
+}
+
+static enum drm_connector_status cdv_hdmi_detect(
+				struct drm_connector *connector, bool force)
+{
+	struct psb_intel_output *psb_intel_output =
+						to_psb_intel_output(connector);
+	struct mid_intel_hdmi_priv *hdmi_priv = psb_intel_output->dev_priv;
+	struct edid *edid = NULL;
+	enum drm_connector_status status = connector_status_disconnected;
+
+	edid = drm_get_edid(&psb_intel_output->base,
+			 psb_intel_output->hdmi_i2c_adapter);
+
+	hdmi_priv->has_hdmi_sink = false;
+	hdmi_priv->has_hdmi_audio = false;
+	if (edid) {
+		if (edid->input & DRM_EDID_INPUT_DIGITAL) {
+			status = connector_status_connected;
+			hdmi_priv->has_hdmi_sink =
+						drm_detect_hdmi_monitor(edid);
+			hdmi_priv->has_hdmi_audio =
+						drm_detect_monitor_audio(edid);
+		}
+
+		psb_intel_output->base.display_info.raw_edid = NULL;
+		kfree(edid);
+	}
+	return status;
+}
+
+static int cdv_hdmi_set_property(struct drm_connector *connector,
+				       struct drm_property *property,
+				       uint64_t value)
+{
+	struct drm_encoder *encoder = connector->encoder;
+
+	if (!strcmp(property->name, "scaling mode") && encoder) {
+		struct psb_intel_crtc *crtc = to_psb_intel_crtc(encoder->crtc);
+		bool centre;
+		uint64_t curValue;
+
+		if (!crtc)
+			return -1;
+
+		switch (value) {
+		case DRM_MODE_SCALE_FULLSCREEN:
+			break;
+		case DRM_MODE_SCALE_NO_SCALE:
+			break;
+		case DRM_MODE_SCALE_ASPECT:
+			break;
+		default:
+			return -1;
+		}
+
+		if (drm_connector_property_get_value(connector,
+							property, &curValue))
+			return -1;
+
+		if (curValue == value)
+			return 0;
+
+		if (drm_connector_property_set_value(connector,
+							property, value))
+			return -1;
+
+		centre = (curValue == DRM_MODE_SCALE_NO_SCALE) ||
+			(value == DRM_MODE_SCALE_NO_SCALE);
+
+		if (crtc->saved_mode.hdisplay != 0 &&
+		    crtc->saved_mode.vdisplay != 0) {
+			if (centre) {
+				if (!drm_crtc_helper_set_mode(encoder->crtc, &crtc->saved_mode,
+					    encoder->crtc->x, encoder->crtc->y, encoder->crtc->fb))
+					return -1;
+			} else {
+				struct drm_encoder_helper_funcs *helpers
+						    = encoder->helper_private;
+				helpers->mode_set(encoder, &crtc->saved_mode,
+					     &crtc->saved_adjusted_mode);
+			}
+		}
+	}
+	return 0;
+}
+
+/*
+ * Return the list of HDMI DDC modes if available.
+ */
+static int cdv_hdmi_get_modes(struct drm_connector *connector)
+{
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+	struct edid *edid = NULL;
+	int ret = 0;
+
+	edid = drm_get_edid(&psb_intel_output->base,
+			 psb_intel_output->hdmi_i2c_adapter);
+	if (edid) {
+		drm_mode_connector_update_edid_property(&psb_intel_output->
+							base, edid);
+		ret = drm_add_edid_modes(&psb_intel_output->base, edid);
+		kfree(edid);
+	}
+	return ret;
+}
+
+static int cdv_hdmi_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+
+	if (mode->clock > 165000)
+		return MODE_CLOCK_HIGH;
+	if (mode->clock < 20000)
+		return MODE_CLOCK_HIGH;
+
+	/* just in case */
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	/* just in case */
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return MODE_NO_INTERLACE;
+
+	/*
+	 * FIXME: for now we limit the size to 1680x1050 on CDV, otherwise it
+	 * will go beyond the stolen memory size allocated to the framebuffer
+	 */
+	if (mode->hdisplay > 1680)
+		return MODE_PANEL;
+	if (mode->vdisplay > 1050)
+		return MODE_PANEL;
+	return MODE_OK;
+}
+
+static void cdv_hdmi_destroy(struct drm_connector *connector)
+{
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+
+	if (psb_intel_output->ddc_bus)
+		psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static const struct drm_encoder_helper_funcs cdv_hdmi_helper_funcs = {
+	.dpms = cdv_hdmi_dpms,
+	.mode_fixup = cdv_hdmi_mode_fixup,
+	.prepare = psb_intel_encoder_prepare,
+	.mode_set = cdv_hdmi_mode_set,
+	.commit = psb_intel_encoder_commit,
+};
+
+static const struct drm_connector_helper_funcs
+					cdv_hdmi_connector_helper_funcs = {
+	.get_modes = cdv_hdmi_get_modes,
+	.mode_valid = cdv_hdmi_mode_valid,
+	.best_encoder = psb_intel_best_encoder,
+};
+
+static const struct drm_connector_funcs cdv_hdmi_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.save = cdv_hdmi_save,
+	.restore = cdv_hdmi_restore,
+	.detect = cdv_hdmi_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = cdv_hdmi_set_property,
+	.destroy = cdv_hdmi_destroy,
+};
+
+void cdv_hdmi_init(struct drm_device *dev,
+			struct psb_intel_mode_device *mode_dev, int reg)
+{
+	struct psb_intel_output *psb_intel_output;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct mid_intel_hdmi_priv *hdmi_priv;
+	int ddc_bus;
+
+	psb_intel_output = kzalloc(sizeof(struct psb_intel_output) +
+			       sizeof(struct mid_intel_hdmi_priv), GFP_KERNEL);
+	if (!psb_intel_output)
+		return;
+
+	hdmi_priv = (struct mid_intel_hdmi_priv *)(psb_intel_output + 1);
+	psb_intel_output->mode_dev = mode_dev;
+	connector = &psb_intel_output->base;
+	encoder = &psb_intel_output->enc;
+	drm_connector_init(dev, &psb_intel_output->base,
+			   &cdv_hdmi_connector_funcs,
+			   DRM_MODE_CONNECTOR_DVID);
+
+	drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_lvds_enc_funcs,
+			 DRM_MODE_ENCODER_TMDS);
+
+	drm_mode_connector_attach_encoder(&psb_intel_output->base,
+					  &psb_intel_output->enc);
+	psb_intel_output->type = INTEL_OUTPUT_HDMI;
+	hdmi_priv->hdmi_reg = reg;
+	hdmi_priv->has_hdmi_sink = false;
+	psb_intel_output->dev_priv = hdmi_priv;
+
+	drm_encoder_helper_add(encoder, &cdv_hdmi_helper_funcs);
+	drm_connector_helper_add(connector,
+				 &cdv_hdmi_connector_helper_funcs);
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+	drm_connector_attach_property(connector,
+	    dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN);
+
+	switch (reg) {
+	case SDVOB:
+		ddc_bus = GPIOE;
+		break;
+	case SDVOC:
+		ddc_bus = GPIOD;
+		break;
+	default:
+		DRM_ERROR("unknown reg 0x%x for HDMI\n", reg);
+		goto failed_ddc;
+		break;
+	}
+
+	psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
+				ddc_bus, (reg == SDVOB) ? "HDMIB" : "HDMIC");
+
+	if (!psb_intel_output->ddc_bus) {
+		dev_err(dev->dev, "No ddc adapter available!\n");
+		goto failed_ddc;
+	}
+	psb_intel_output->hdmi_i2c_adapter =
+				&(psb_intel_output->ddc_bus->adapter);
+	hdmi_priv->dev = dev;
+	drm_sysfs_connector_add(connector);
+	return;
+
+failed_ddc:
+	drm_encoder_cleanup(&psb_intel_output->enc);
+	drm_connector_cleanup(&psb_intel_output->base);
+	kfree(psb_intel_output);
+}
diff --git a/drivers/gpu/drm/gma500/cdv_intel_lvds.c b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
new file mode 100644
index 0000000..988b2d0
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
@@ -0,0 +1,721 @@
+/*
+ * Copyright © 2006-2011 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ *	Dave Airlie <airlied@linux.ie>
+ *	Jesse Barnes <jesse.barnes@intel.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/dmi.h>
+#include <drm/drmP.h>
+
+#include "intel_bios.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "power.h"
+#include <linux/pm_runtime.h>
+#include "cdv_device.h"
+
+/**
+ * LVDS I2C backlight control macros
+ */
+#define BRIGHTNESS_MAX_LEVEL 100
+#define BRIGHTNESS_MASK 0xFF
+#define BLC_I2C_TYPE	0x01
+#define BLC_PWM_TYPT	0x02
+
+#define BLC_POLARITY_NORMAL 0
+#define BLC_POLARITY_INVERSE 1
+
+#define PSB_BLC_MAX_PWM_REG_FREQ       (0xFFFE)
+#define PSB_BLC_MIN_PWM_REG_FREQ	(0x2)
+#define PSB_BLC_PWM_PRECISION_FACTOR	(10)
+#define PSB_BACKLIGHT_PWM_CTL_SHIFT	(16)
+#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
+
+struct cdv_intel_lvds_priv {
+	/**
+	 * Saved LVDO output states
+	 */
+	uint32_t savePP_ON;
+	uint32_t savePP_OFF;
+	uint32_t saveLVDS;
+	uint32_t savePP_CONTROL;
+	uint32_t savePP_CYCLE;
+	uint32_t savePFIT_CONTROL;
+	uint32_t savePFIT_PGM_RATIOS;
+	uint32_t saveBLC_PWM_CTL;
+};
+
+/*
+ * Returns the maximum level of the backlight duty cycle field.
+ */
+static u32 cdv_intel_lvds_get_max_backlight(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 retval;
+
+	if (gma_power_begin(dev, false)) {
+		retval = ((REG_READ(BLC_PWM_CTL) &
+			  BACKLIGHT_MODULATION_FREQ_MASK) >>
+			  BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+		gma_power_end(dev);
+	} else
+		retval = ((dev_priv->saveBLC_PWM_CTL &
+			  BACKLIGHT_MODULATION_FREQ_MASK) >>
+			  BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+	return retval;
+}
+
+/*
+ * Set LVDS backlight level by I2C command
+ */
+static int cdv_lvds_i2c_set_brightness(struct drm_device *dev,
+					unsigned int level)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus;
+	u8 out_buf[2];
+	unsigned int blc_i2c_brightness;
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = lvds_i2c_bus->slave_addr,
+			.flags = 0,
+			.len = 2,
+			.buf = out_buf,
+		}
+	};
+
+	blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level *
+			     BRIGHTNESS_MASK /
+			     BRIGHTNESS_MAX_LEVEL);
+
+	if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
+		blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness;
+
+	out_buf[0] = dev_priv->lvds_bl->brightnesscmd;
+	out_buf[1] = (u8)blc_i2c_brightness;
+
+	if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1)
+		return 0;
+
+	DRM_ERROR("I2C transfer error\n");
+	return -1;
+}
+
+
+static int cdv_lvds_pwm_set_brightness(struct drm_device *dev, int level)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	u32 max_pwm_blc;
+	u32 blc_pwm_duty_cycle;
+
+	max_pwm_blc = cdv_intel_lvds_get_max_backlight(dev);
+
+	/*BLC_PWM_CTL Should be initiated while backlight device init*/
+	BUG_ON((max_pwm_blc & PSB_BLC_MAX_PWM_REG_FREQ) == 0);
+
+	blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL;
+
+	if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
+		blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle;
+
+	blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
+	REG_WRITE(BLC_PWM_CTL,
+		  (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
+		  (blc_pwm_duty_cycle));
+
+	return 0;
+}
+
+/*
+ * Set LVDS backlight level either by I2C or PWM
+ */
+void cdv_intel_lvds_set_brightness(struct drm_device *dev, int level)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (!dev_priv->lvds_bl) {
+		DRM_ERROR("NO LVDS Backlight Info\n");
+		return;
+	}
+
+	if (dev_priv->lvds_bl->type == BLC_I2C_TYPE)
+		cdv_lvds_i2c_set_brightness(dev, level);
+	else
+		cdv_lvds_pwm_set_brightness(dev, level);
+}
+
+/**
+ * Sets the backlight level.
+ *
+ * level backlight level, from 0 to cdv_intel_lvds_get_max_backlight().
+ */
+static void cdv_intel_lvds_set_backlight(struct drm_device *dev, int level)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 blc_pwm_ctl;
+
+	if (gma_power_begin(dev, false)) {
+		blc_pwm_ctl =
+			REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
+		REG_WRITE(BLC_PWM_CTL,
+				(blc_pwm_ctl |
+				(level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
+		gma_power_end(dev);
+	} else {
+		blc_pwm_ctl = dev_priv->saveBLC_PWM_CTL &
+				~BACKLIGHT_DUTY_CYCLE_MASK;
+		dev_priv->saveBLC_PWM_CTL = (blc_pwm_ctl |
+					(level << BACKLIGHT_DUTY_CYCLE_SHIFT));
+	}
+}
+
+/**
+ * Sets the power state for the panel.
+ */
+static void cdv_intel_lvds_set_power(struct drm_device *dev,
+				 struct psb_intel_output *output, bool on)
+{
+	u32 pp_status;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	if (on) {
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
+			  POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while ((pp_status & PP_ON) == 0);
+
+		cdv_intel_lvds_set_backlight(dev,
+					 output->
+					 mode_dev->backlight_duty_cycle);
+	} else {
+		cdv_intel_lvds_set_backlight(dev, 0);
+
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
+			  ~POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while (pp_status & PP_ON);
+	}
+	gma_power_end(dev);
+}
+
+static void cdv_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	if (mode == DRM_MODE_DPMS_ON)
+		cdv_intel_lvds_set_power(dev, output, true);
+	else
+		cdv_intel_lvds_set_power(dev, output, false);
+	/* XXX: We never power down the LVDS pairs. */
+}
+
+static void cdv_intel_lvds_save(struct drm_connector *connector)
+{
+}
+
+static void cdv_intel_lvds_restore(struct drm_connector *connector)
+{
+}
+
+int cdv_intel_lvds_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+	struct psb_intel_output *psb_intel_output =
+				to_psb_intel_output(connector);
+	struct drm_display_mode *fixed_mode =
+	    psb_intel_output->mode_dev->panel_fixed_mode;
+
+	/* just in case */
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	/* just in case */
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return MODE_NO_INTERLACE;
+
+	if (fixed_mode) {
+		if (mode->hdisplay > fixed_mode->hdisplay)
+			return MODE_PANEL;
+		if (mode->vdisplay > fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+	return MODE_OK;
+}
+
+bool cdv_intel_lvds_mode_fixup(struct drm_encoder *encoder,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	struct psb_intel_mode_device *mode_dev =
+	    enc_to_psb_intel_output(encoder)->mode_dev;
+	struct drm_device *dev = encoder->dev;
+	struct drm_encoder *tmp_encoder;
+	struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode;
+
+	/* Should never happen!! */
+	list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list,
+			    head) {
+		if (tmp_encoder != encoder
+		    && tmp_encoder->crtc == encoder->crtc) {
+			printk(KERN_ERR "Can't enable LVDS and another "
+			       "encoder on the same pipe\n");
+			return false;
+		}
+	}
+
+	/*
+	 * If we have timings from the BIOS for the panel, put them in
+	 * to the adjusted mode.  The CRTC will be set up for this mode,
+	 * with the panel scaling set up to source from the H/VDisplay
+	 * of the original mode.
+	 */
+	if (panel_fixed_mode != NULL) {
+		adjusted_mode->hdisplay = panel_fixed_mode->hdisplay;
+		adjusted_mode->hsync_start = panel_fixed_mode->hsync_start;
+		adjusted_mode->hsync_end = panel_fixed_mode->hsync_end;
+		adjusted_mode->htotal = panel_fixed_mode->htotal;
+		adjusted_mode->vdisplay = panel_fixed_mode->vdisplay;
+		adjusted_mode->vsync_start = panel_fixed_mode->vsync_start;
+		adjusted_mode->vsync_end = panel_fixed_mode->vsync_end;
+		adjusted_mode->vtotal = panel_fixed_mode->vtotal;
+		adjusted_mode->clock = panel_fixed_mode->clock;
+		drm_mode_set_crtcinfo(adjusted_mode,
+				      CRTC_INTERLACE_HALVE_V);
+	}
+
+	/*
+	 * XXX: It would be nice to support lower refresh rates on the
+	 * panels to reduce power consumption, and perhaps match the
+	 * user's requested refresh rate.
+	 */
+
+	return true;
+}
+
+static void cdv_intel_lvds_prepare(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct psb_intel_mode_device *mode_dev = output->mode_dev;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
+	mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
+					  BACKLIGHT_DUTY_CYCLE_MASK);
+
+	cdv_intel_lvds_set_power(dev, output, false);
+
+	gma_power_end(dev);
+}
+
+static void cdv_intel_lvds_commit(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct psb_intel_mode_device *mode_dev = output->mode_dev;
+
+	if (mode_dev->backlight_duty_cycle == 0)
+		mode_dev->backlight_duty_cycle =
+		    cdv_intel_lvds_get_max_backlight(dev);
+
+	cdv_intel_lvds_set_power(dev, output, true);
+}
+
+static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 pfit_control;
+
+	/*
+	 * The LVDS pin pair will already have been turned on in the
+	 * cdv_intel_crtc_mode_set since it has a large impact on the DPLL
+	 * settings.
+	 */
+
+	/*
+	 * Enable automatic panel scaling so that non-native modes fill the
+	 * screen.  Should be enabled before the pipe is enabled, according to
+	 * register description and PRM.
+	 */
+	if (mode->hdisplay != adjusted_mode->hdisplay ||
+	    mode->vdisplay != adjusted_mode->vdisplay)
+		pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
+				HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
+				HORIZ_INTERP_BILINEAR);
+	else
+		pfit_control = 0;
+
+	if (dev_priv->lvds_dither)
+		pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+
+	REG_WRITE(PFIT_CONTROL, pfit_control);
+}
+
+/**
+ * Detect the LVDS connection.
+ *
+ * This always returns CONNECTOR_STATUS_CONNECTED.
+ * This connector should only have
+ * been set up if the LVDS was actually connected anyway.
+ */
+static enum drm_connector_status cdv_intel_lvds_detect(
+				struct drm_connector *connector, bool force)
+{
+	return connector_status_connected;
+}
+
+/**
+ * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
+ */
+static int cdv_intel_lvds_get_modes(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+	struct psb_intel_mode_device *mode_dev =
+					psb_intel_output->mode_dev;
+	int ret;
+
+	ret = psb_intel_ddc_get_modes(psb_intel_output);
+
+	if (ret)
+		return ret;
+
+	/* Didn't get an EDID, so
+	 * Set wide sync ranges so we get all modes
+	 * handed to valid_mode for checking
+	 */
+	connector->display_info.min_vfreq = 0;
+	connector->display_info.max_vfreq = 200;
+	connector->display_info.min_hfreq = 0;
+	connector->display_info.max_hfreq = 200;
+	if (mode_dev->panel_fixed_mode != NULL) {
+		struct drm_display_mode *mode =
+		    drm_mode_duplicate(dev, mode_dev->panel_fixed_mode);
+		drm_mode_probed_add(connector, mode);
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * cdv_intel_lvds_destroy - unregister and free LVDS structures
+ * @connector: connector to free
+ *
+ * Unregister the DDC bus for this connector then free the driver private
+ * structure.
+ */
+void cdv_intel_lvds_destroy(struct drm_connector *connector)
+{
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+
+	if (psb_intel_output->ddc_bus)
+		psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+int cdv_intel_lvds_set_property(struct drm_connector *connector,
+				       struct drm_property *property,
+				       uint64_t value)
+{
+	struct drm_encoder *encoder = connector->encoder;
+
+	if (!strcmp(property->name, "scaling mode") && encoder) {
+		struct psb_intel_crtc *crtc =
+					to_psb_intel_crtc(encoder->crtc);
+		uint64_t curValue;
+
+		if (!crtc)
+			return -1;
+
+		switch (value) {
+		case DRM_MODE_SCALE_FULLSCREEN:
+			break;
+		case DRM_MODE_SCALE_NO_SCALE:
+			break;
+		case DRM_MODE_SCALE_ASPECT:
+			break;
+		default:
+			return -1;
+		}
+
+		if (drm_connector_property_get_value(connector,
+						     property,
+						     &curValue))
+			return -1;
+
+		if (curValue == value)
+			return 0;
+
+		if (drm_connector_property_set_value(connector,
+							property,
+							value))
+			return -1;
+
+		if (crtc->saved_mode.hdisplay != 0 &&
+		    crtc->saved_mode.vdisplay != 0) {
+			if (!drm_crtc_helper_set_mode(encoder->crtc,
+						      &crtc->saved_mode,
+						      encoder->crtc->x,
+						      encoder->crtc->y,
+						      encoder->crtc->fb))
+				return -1;
+		}
+	} else if (!strcmp(property->name, "backlight") && encoder) {
+		if (drm_connector_property_set_value(connector,
+							property,
+							value))
+			return -1;
+		else {
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+			struct drm_psb_private *dev_priv =
+						encoder->dev->dev_private;
+			struct backlight_device *bd =
+						dev_priv->backlight_device;
+			bd->props.brightness = value;
+			backlight_update_status(bd);
+#endif
+		}
+	} else if (!strcmp(property->name, "DPMS") && encoder) {
+		struct drm_encoder_helper_funcs *helpers =
+					encoder->helper_private;
+		helpers->dpms(encoder, value);
+	}
+	return 0;
+}
+
+static const struct drm_encoder_helper_funcs
+					cdv_intel_lvds_helper_funcs = {
+	.dpms = cdv_intel_lvds_encoder_dpms,
+	.mode_fixup = cdv_intel_lvds_mode_fixup,
+	.prepare = cdv_intel_lvds_prepare,
+	.mode_set = cdv_intel_lvds_mode_set,
+	.commit = cdv_intel_lvds_commit,
+};
+
+static const struct drm_connector_helper_funcs
+				cdv_intel_lvds_connector_helper_funcs = {
+	.get_modes = cdv_intel_lvds_get_modes,
+	.mode_valid = cdv_intel_lvds_mode_valid,
+	.best_encoder = psb_intel_best_encoder,
+};
+
+static const struct drm_connector_funcs cdv_intel_lvds_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.save = cdv_intel_lvds_save,
+	.restore = cdv_intel_lvds_restore,
+	.detect = cdv_intel_lvds_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = cdv_intel_lvds_set_property,
+	.destroy = cdv_intel_lvds_destroy,
+};
+
+
+static void cdv_intel_lvds_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+const struct drm_encoder_funcs cdv_intel_lvds_enc_funcs = {
+	.destroy = cdv_intel_lvds_enc_destroy,
+};
+
+/**
+ * cdv_intel_lvds_init - setup LVDS connectors on this device
+ * @dev: drm device
+ *
+ * Create the connector, register the LVDS DDC bus, and try to figure out what
+ * modes we can display on the LVDS panel (if present).
+ */
+void cdv_intel_lvds_init(struct drm_device *dev,
+		     struct psb_intel_mode_device *mode_dev)
+{
+	struct psb_intel_output *psb_intel_output;
+	struct cdv_intel_lvds_priv *lvds_priv;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct drm_display_mode *scan;
+	struct drm_crtc *crtc;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 lvds;
+	int pipe;
+
+	psb_intel_output = kzalloc(sizeof(struct psb_intel_output) +
+			sizeof(struct cdv_intel_lvds_priv), GFP_KERNEL);
+	if (!psb_intel_output)
+		return;
+
+	lvds_priv = (struct cdv_intel_lvds_priv *)(psb_intel_output + 1);
+
+	psb_intel_output->dev_priv = lvds_priv;
+
+	psb_intel_output->mode_dev = mode_dev;
+	connector = &psb_intel_output->base;
+	encoder = &psb_intel_output->enc;
+
+
+	drm_connector_init(dev, &psb_intel_output->base,
+			   &cdv_intel_lvds_connector_funcs,
+			   DRM_MODE_CONNECTOR_LVDS);
+
+	drm_encoder_init(dev, &psb_intel_output->enc,
+			 &cdv_intel_lvds_enc_funcs,
+			 DRM_MODE_ENCODER_LVDS);
+
+
+	drm_mode_connector_attach_encoder(&psb_intel_output->base,
+					  &psb_intel_output->enc);
+	psb_intel_output->type = INTEL_OUTPUT_LVDS;
+
+	drm_encoder_helper_add(encoder, &cdv_intel_lvds_helper_funcs);
+	drm_connector_helper_add(connector,
+				 &cdv_intel_lvds_connector_helper_funcs);
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+	/*Attach connector properties*/
+	drm_connector_attach_property(connector,
+				      dev->mode_config.scaling_mode_property,
+				      DRM_MODE_SCALE_FULLSCREEN);
+	drm_connector_attach_property(connector,
+				      dev_priv->backlight_property,
+				      BRIGHTNESS_MAX_LEVEL);
+
+	/**
+	 * Set up I2C bus
+	 * FIXME: distroy i2c_bus when exit
+	 */
+	psb_intel_output->i2c_bus = psb_intel_i2c_create(dev,
+							 GPIOB,
+							 "LVDSBLC_B");
+	if (!psb_intel_output->i2c_bus) {
+		dev_printk(KERN_ERR,
+			&dev->pdev->dev, "I2C bus registration failed.\n");
+		goto failed_blc_i2c;
+	}
+	psb_intel_output->i2c_bus->slave_addr = 0x2C;
+	dev_priv->lvds_i2c_bus =  psb_intel_output->i2c_bus;
+
+	/*
+	 * LVDS discovery:
+	 * 1) check for EDID on DDC
+	 * 2) check for VBT data
+	 * 3) check to see if LVDS is already on
+	 *    if none of the above, no panel
+	 * 4) make sure lid is open
+	 *    if closed, act like it's not there for now
+	 */
+
+	/* Set up the DDC bus. */
+	psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
+							 GPIOC,
+							 "LVDSDDC_C");
+	if (!psb_intel_output->ddc_bus) {
+		dev_printk(KERN_ERR, &dev->pdev->dev,
+			   "DDC bus registration " "failed.\n");
+		goto failed_ddc;
+	}
+
+	/*
+	 * Attempt to get the fixed panel mode from DDC.  Assume that the
+	 * preferred mode is the right one.
+	 */
+	psb_intel_ddc_get_modes(psb_intel_output);
+	list_for_each_entry(scan, &connector->probed_modes, head) {
+		if (scan->type & DRM_MODE_TYPE_PREFERRED) {
+			mode_dev->panel_fixed_mode =
+			    drm_mode_duplicate(dev, scan);
+			goto out;	/* FIXME: check for quirks */
+		}
+	}
+
+	/* Failed to get EDID, what about VBT? do we need this?*/
+	if (dev_priv->lfp_lvds_vbt_mode) {
+		mode_dev->panel_fixed_mode =
+			drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
+		if (mode_dev->panel_fixed_mode) {
+			mode_dev->panel_fixed_mode->type |=
+				DRM_MODE_TYPE_PREFERRED;
+			goto out;	/* FIXME: check for quirks */
+		}
+	}
+	/*
+	 * If we didn't get EDID, try checking if the panel is already turned
+	 * on.	If so, assume that whatever is currently programmed is the
+	 * correct mode.
+	 */
+	lvds = REG_READ(LVDS);
+	pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
+	crtc = psb_intel_get_crtc_from_pipe(dev, pipe);
+
+	if (crtc && (lvds & LVDS_PORT_EN)) {
+		mode_dev->panel_fixed_mode =
+		    cdv_intel_crtc_mode_get(dev, crtc);
+		if (mode_dev->panel_fixed_mode) {
+			mode_dev->panel_fixed_mode->type |=
+			    DRM_MODE_TYPE_PREFERRED;
+			goto out;	/* FIXME: check for quirks */
+		}
+	}
+
+	/* If we still don't have a mode after all that, give up. */
+	if (!mode_dev->panel_fixed_mode) {
+		DRM_DEBUG
+			("Found no modes on the lvds, ignoring the LVDS\n");
+		goto failed_find;
+	}
+
+out:
+	drm_sysfs_connector_add(connector);
+	return;
+
+failed_find:
+	printk(KERN_ERR "Failed find\n");
+	if (psb_intel_output->ddc_bus)
+		psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
+failed_ddc:
+	printk(KERN_ERR "Failed DDC\n");
+	if (psb_intel_output->i2c_bus)
+		psb_intel_i2c_destroy(psb_intel_output->i2c_bus);
+failed_blc_i2c:
+	printk(KERN_ERR "Failed BLC\n");
+	drm_encoder_cleanup(encoder);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 12/12] gma500: Now connect up to the DRM build to finish the job

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/Kconfig  |    3 +++
 drivers/gpu/drm/Makefile |    1 +
 2 files changed, 4 insertions(+), 0 deletions(-)


diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index b493663..7c1cb0d 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -158,3 +158,6 @@ config DRM_SAVAGE
 	help
 	  Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 	  chipset. If M is selected the module will be called savage.
+
+source "drivers/gpu/drm/gma500/Kconfig"
+
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 89cf05a..2d1fbc1 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -35,4 +35,5 @@ obj-$(CONFIG_DRM_SAVAGE)+= savage/
 obj-$(CONFIG_DRM_VMWGFX)+= vmwgfx/
 obj-$(CONFIG_DRM_VIA)	+=via/
 obj-$(CONFIG_DRM_NOUVEAU) +=nouveau/
+obj-$(CONFIG_DRM_GMA500) += gma500/
 obj-y			+= i2c/

Re: [PATCH 02/12] gma500: GEM and GEM glue

[Daniel Vetter]

On Thu, Nov 03, 2011 at 06:20:58PM +0000, Alan Cox wrote:
> From: Alan Cox <alan@linux.intel.com>
> 
> The driver uses GEM along with a couple of small bits of wrapping of its
> own. The only real oddity here is the support for using the 'stolen' memory
> rather than wasting several MB.
> 
> We use a simple resource manager as we don't need to manage our space
> intensively at all as we only do 2D work. We also have a GTT which is
> entirely GPU facing so in the Cedarview case are not even allocating from
> host address space.
> 
> Signed-off-by: Alan Cox <alan@linux.intel.com>

One tiny comment below (has no effect on the actual code) and your
drm_glue.c is already merged through some patches from Rob Clarke.

Reviewed-by: Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

[snip]

> +static int psb_gem_create(struct drm_file *file,
> +	struct drm_device *dev, uint64_t size, uint32_t *handlep)
> +{
> +	struct gtt_range *r;
> +	int ret;
> +	u32 handle;
> +
> +	size = roundup(size, PAGE_SIZE);
> +
> +	/* Allocate our object - for now a direct gtt range which is not
> +	   stolen memory backed */
> +	r = psb_gtt_alloc_range(dev, size, "gem", 0);
> +	if (r == NULL) {
> +		dev_err(dev->dev, "no memory for %lld byte GEM object\n", size);
> +		return -ENOSPC;
> +	}
> +	/* Initialize the extra goodies GEM needs to do all the hard work */
> +	if (drm_gem_object_init(dev, &r->gem, size) != 0) {
> +		psb_gtt_free_range(dev, r);
> +		/* GEM doesn't give an error code and we don't have an
> +		   EGEMSUCKS so make something up for now - FIXME */
> +		dev_err(dev->dev, "GEM init failed for %lld\n", size);
> +		return -ENOMEM;

Actually my drm_gem_object_init here returns -ENOMEM in the (currently
only) failure case ...

> +	}
> +	/* Give the object a handle so we can carry it more easily */
> +	ret = drm_gem_handle_create(file, &r->gem, &handle);
> +	if (ret) {
> +		dev_err(dev->dev, "GEM handle failed for %p, %lld\n",
> +							&r->gem, size);
> +		drm_gem_object_release(&r->gem);
> +		psb_gtt_free_range(dev, r);
> +		return ret;
> +	}
> +	/* We have the initial and handle reference but need only one now */
> +	drm_gem_object_unreference(&r->gem);
> +	*handlep = handle;
> +	return 0;
> +}

[snip]

> diff --git a/drivers/gpu/drm/gma500/gem_glue.c b/drivers/gpu/drm/gma500/gem_glue.c
> new file mode 100644
> index 0000000..daac121
> --- /dev/null
> +++ b/drivers/gpu/drm/gma500/gem_glue.c
> @@ -0,0 +1,89 @@
> +/**************************************************************************
> + * Copyright (c) 2011, Intel Corporation.
> + * All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
> + *
> + **************************************************************************/
> +
> +#include <drm/drmP.h>
> +#include <drm/drm.h>
> +
> +void drm_gem_object_release_wrap(struct drm_gem_object *obj)
> +{
> +	/* Remove the list map if one is present */
> +	if (obj->map_list.map) {
> +		struct drm_gem_mm *mm = obj->dev->mm_private;
> +		struct drm_map_list *list = &obj->map_list;
> +		drm_ht_remove_item(&mm->offset_hash, &list->hash);
> +		drm_mm_put_block(list->file_offset_node);
> +		kfree(list->map);
> +		list->map = NULL;

drm_gem_free_mmap_offset from Rob Clarke does that for you.

> +	}
> +	drm_gem_object_release(obj);
> +}
> +
> +/**
> + *	gem_create_mmap_offset		-	invent an mmap offset
> + *	@obj: our object
> + *
> + *	Standard implementation of offset generation for mmap as is
> + *	duplicated in several drivers. This belongs in GEM.
> + */
> +int gem_create_mmap_offset(struct drm_gem_object *obj)

Already merged.

> +{
> +	struct drm_device *dev = obj->dev;
> +	struct drm_gem_mm *mm = dev->mm_private;
> +	struct drm_map_list *list;
> +	struct drm_local_map *map;
> +	int ret;
> +
> +	list = &obj->map_list;
> +	list->map = kzalloc(sizeof(struct drm_map_list), GFP_KERNEL);
> +	if (list->map == NULL)
> +		return -ENOMEM;
> +	map = list->map;
> +	map->type = _DRM_GEM;
> +	map->size = obj->size;
> +	map->handle = obj;
> +
> +	list->file_offset_node = drm_mm_search_free(&mm->offset_manager,
> +					obj->size / PAGE_SIZE, 0, 0);
> +	if (!list->file_offset_node) {
> +		dev_err(dev->dev, "failed to allocate offset for bo %d\n",
> +								obj->name);
> +		ret = -ENOSPC;
> +		goto free_it;
> +	}
> +	list->file_offset_node = drm_mm_get_block(list->file_offset_node,
> +					obj->size / PAGE_SIZE, 0);
> +	if (!list->file_offset_node) {
> +		ret = -ENOMEM;
> +		goto free_it;
> +	}
> +	list->hash.key = list->file_offset_node->start;
> +	ret = drm_ht_insert_item(&mm->offset_hash, &list->hash);
> +	if (ret) {
> +		dev_err(dev->dev, "failed to add to map hash\n");
> +		goto free_mm;
> +	}
> +	return 0;
> +
> +free_mm:
> +	drm_mm_put_block(list->file_offset_node);
> +free_it:
> +	kfree(list->map);
> +	list->map = NULL;
> +	return ret;
> +}
> diff --git a/drivers/gpu/drm/gma500/gem_glue.h b/drivers/gpu/drm/gma500/gem_glue.h
> new file mode 100644
> index 0000000..ce5ce30
> --- /dev/null
> +++ b/drivers/gpu/drm/gma500/gem_glue.h
> @@ -0,0 +1,2 @@
> +extern void drm_gem_object_release_wrap(struct drm_gem_object *obj);
> +extern int gem_create_mmap_offset(struct drm_gem_object *obj);
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Mail: daniel@ffwll.ch
Mobile: +41 (0)79 365 57 48

Re: [PATCH 03/12] gma500: introduce the GTT and MMU handling logic

[Daniel Vetter]

On Thu, Nov 03, 2011 at 06:21:09PM +0000, Alan Cox wrote:
> From: Alan Cox <alan@linux.intel.com>
> 
> This fits alongside the GEM support to manage our resources on the card
> itself. It's not actually clear we need to configure the MMU at all.
> Further research is needed before removing it entirely. For now we suck it
> in (slightly abused) from the old semi-free driver.
> 
> Signed-off-by: Alan Cox <alan@linux.intel.com>

One comment below where I've gone wtf ... also tons of functions that are
not static, but I expect them to get used in later patches. A few more
comments in the powervr mmu code. Otherwise
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

[snip]

> -- +void psb_gtt_alloc(struct drm_device *dev)
> +{
> +	struct drm_psb_private *dev_priv = dev->dev_private;
> +	init_rwsem(&dev_priv->gtt.sem);
> +}

... I don't get this function. Seemingly only one callsite, no header
declaration for it. And I expect something called _alloc to actually alloc
something ;-) Generally tons of functions not marked as static, but I
expect them to get used later on in the follow-up patches.

> +void psb_gtt_takedown(struct drm_device *dev)
> +{
> +	struct drm_psb_private *dev_priv = dev->dev_private;
> +
> +	if (dev_priv->gtt_map) {
> +		iounmap(dev_priv->gtt_map);
> +		dev_priv->gtt_map = NULL;
> +	}
> +	if (dev_priv->gtt_initialized) {
> +		pci_write_config_word(dev->pdev, PSB_GMCH_CTRL,
> +				      dev_priv->gmch_ctrl);
> +		PSB_WVDC32(dev_priv->pge_ctl, PSB_PGETBL_CTL);
> +		(void) PSB_RVDC32(PSB_PGETBL_CTL);
> +	}
> +	if (dev_priv->vram_addr)
> +		iounmap(dev_priv->gtt_map);
> +}
> +
> +int psb_gtt_init(struct drm_device *dev, int resume)
> +{
> +	struct drm_psb_private *dev_priv = dev->dev_private;
> +	unsigned gtt_pages;
> +	unsigned long stolen_size, vram_stolen_size;
> +	unsigned i, num_pages;
> +	unsigned pfn_base;
> +	uint32_t vram_pages;
> +	uint32_t dvmt_mode = 0;
> +	struct psb_gtt *pg;
> +
> +	int ret = 0;
> +	uint32_t pte;
> +
> +	mutex_init(&dev_priv->gtt_mutex);
> +
> +	psb_gtt_alloc(dev);
> +	pg = &dev_priv->gtt;
> +
> +	/* Enable the GTT */
> +	pci_read_config_word(dev->pdev, PSB_GMCH_CTRL, &dev_priv->gmch_ctrl);
> +	pci_write_config_word(dev->pdev, PSB_GMCH_CTRL,
> +			      dev_priv->gmch_ctrl | _PSB_GMCH_ENABLED);
> +
> +	dev_priv->pge_ctl = PSB_RVDC32(PSB_PGETBL_CTL);
> +	PSB_WVDC32(dev_priv->pge_ctl | _PSB_PGETBL_ENABLED, PSB_PGETBL_CTL);
> +	(void) PSB_RVDC32(PSB_PGETBL_CTL);
> +
> +	/* The root resource we allocate address space from */
> +	dev_priv->gtt_initialized = 1;
> +
> +	pg->gtt_phys_start = dev_priv->pge_ctl & PAGE_MASK;
> +
> +	/*
> +	 *	FIXME: video mmu has hw bug to access 0x0D0000000,
> +	 *	then make gatt start at 0x0e000,0000
> +	 */
> +	pg->mmu_gatt_start = 0xE0000000;
> +
> +	pg->gtt_start = pci_resource_start(dev->pdev, PSB_GTT_RESOURCE);
> +	gtt_pages = pci_resource_len(dev->pdev, PSB_GTT_RESOURCE)
> +								>> PAGE_SHIFT;
> +	/* CDV workaround */
> +	if (pg->gtt_start == 0 || gtt_pages == 0) {
> +		dev_err(dev->dev, "GTT PCI BAR not initialized.\n");
> +		gtt_pages = 64;
> +		pg->gtt_start = dev_priv->pge_ctl;
> +	}
> +
> +	pg->gatt_start = pci_resource_start(dev->pdev, PSB_GATT_RESOURCE);
> +	pg->gatt_pages = pci_resource_len(dev->pdev, PSB_GATT_RESOURCE)
> +								>> PAGE_SHIFT;
> +	dev_priv->gtt_mem = &dev->pdev->resource[PSB_GATT_RESOURCE];
> +
> +	if (pg->gatt_pages == 0 || pg->gatt_start == 0) {
> +		static struct resource fudge;	/* Preferably peppermint */
> +
> +		/* This can occur on CDV SDV systems. Fudge it in this case.
> +		   We really don't care what imaginary space is being allocated
> +		   at this point */
> +		dev_err(dev->dev, "GATT PCI BAR not initialized.\n");
> +		pg->gatt_start = 0x40000000;
> +		pg->gatt_pages = (128 * 1024 * 1024) >> PAGE_SHIFT;
> +		fudge.start = 0x40000000;
> +		fudge.end = 0x40000000 + 128 * 1024 * 1024 - 1;
> +		fudge.name = "fudge";
> +		fudge.flags = IORESOURCE_MEM;
> +		dev_priv->gtt_mem = &fudge;
> +	}
> +
> +	pci_read_config_dword(dev->pdev, PSB_BSM, &dev_priv->stolen_base);
> +	vram_stolen_size = pg->gtt_phys_start - dev_priv->stolen_base
> +								- PAGE_SIZE;
> +
> +	stolen_size = vram_stolen_size;
> +
> +	printk(KERN_INFO "Stolen memory information\n");
> +	printk(KERN_INFO "       base in RAM: 0x%x\n", dev_priv->stolen_base);
> +	printk(KERN_INFO "       size: %luK, calculated by (GTT RAM base) - (Stolen base), seems wrong\n",
> +		vram_stolen_size/1024);
> +	dvmt_mode = (dev_priv->gmch_ctrl >> 4) & 0x7;
> +	printk(KERN_INFO "      the correct size should be: %dM(dvmt mode=%d)\n",
> +		(dvmt_mode == 1) ? 1 : (2 << (dvmt_mode - 1)), dvmt_mode);
> +
> +	if (resume && (gtt_pages != pg->gtt_pages) &&
> +	    (stolen_size != pg->stolen_size)) {
> +		dev_err(dev->dev, "GTT resume error.\n");
> +		ret = -EINVAL;
> +		goto out_err;
> +	}
> +
> +	pg->gtt_pages = gtt_pages;
> +	pg->stolen_size = stolen_size;
> +	dev_priv->vram_stolen_size = vram_stolen_size;
> +
> +	/*
> +	 *	Map the GTT and the stolen memory area
> +	 */
> +	dev_priv->gtt_map = ioremap_nocache(pg->gtt_phys_start,
> +						gtt_pages << PAGE_SHIFT);
> +	if (!dev_priv->gtt_map) {
> +		dev_err(dev->dev, "Failure to map gtt.\n");
> +		ret = -ENOMEM;
> +		goto out_err;
> +	}
> +
> +	dev_priv->vram_addr = ioremap_wc(dev_priv->stolen_base, stolen_size);
> +	if (!dev_priv->vram_addr) {
> +		dev_err(dev->dev, "Failure to map stolen base.\n");
> +		ret = -ENOMEM;
> +		goto out_err;
> +	}

You might want to look into the io_mapping stuff - after all this is for
32bit atoms with just 1g of kernel addressable memory. Or is the gtt of
these things so puny it's not worth it?

[snip]

> diff --git a/drivers/gpu/drm/gma500/mmu.c b/drivers/gpu/drm/gma500/mmu.c
> new file mode 100644
> index 0000000..c904d73
> --- /dev/null
> +++ b/drivers/gpu/drm/gma500/mmu.c
> @@ -0,0 +1,858 @@
> +/**************************************************************************
> + * Copyright (c) 2007, Intel Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
> + *
> + **************************************************************************/
> +#include <drm/drmP.h>
> +#include "psb_drv.h"
> +#include "psb_reg.h"
> +
> +/*
> + * Code for the SGX MMU:
> + */
> +
> +/*
> + * clflush on one processor only:
> + * clflush should apparently flush the cache line on all processors in an
> + * SMP system.
> + */
> +
> +/*
> + * kmap atomic:
> + * The usage of the slots must be completely encapsulated within a spinlock, and
> + * no other functions that may be using the locks for other purposed may be
> + * called from within the locked region.
> + * Since the slots are per processor, this will guarantee that we are the only
> + * user.
> + */

Afaik this comment is bogus. And the previous one sounds like it's no
clear whether this holds (it does, at least for the i915.ko driver). Maybe
kill them both?

> +/*
> + * TODO: Inserting ptes from an interrupt handler:
> + * This may be desirable for some SGX functionality where the GPU can fault in
> + * needed pages. For that, we need to make an atomic insert_pages function, that
> + * may fail.
> + * If it fails, the caller need to insert the page using a workqueue function,
> + * but on average it should be fast.
> + */
> +
> +struct psb_mmu_driver {
> +	/* protects driver- and pd structures. Always take in read mode
> +	 * before taking the page table spinlock.
> +	 */
> +	struct rw_semaphore sem;
> +
> +	/* protects page tables, directory tables and pt tables.
> +	 * and pt structures.
> +	 */
> +	spinlock_t lock;
> +
> +	atomic_t needs_tlbflush;
> +
> +	uint8_t __iomem *register_map;
> +	struct psb_mmu_pd *default_pd;
> +	/*uint32_t bif_ctrl;*/
> +	int has_clflush;
> +	int clflush_add;
> +	unsigned long clflush_mask;
> +
> +	struct drm_psb_private *dev_priv;
> +};
> +
> +struct psb_mmu_pd;
> +
> +struct psb_mmu_pt {
> +	struct psb_mmu_pd *pd;
> +	uint32_t index;
> +	uint32_t count;
> +	struct page *p;
> +	uint32_t *v;
> +};
> +
> +struct psb_mmu_pd {
> +	struct psb_mmu_driver *driver;
> +	int hw_context;
> +	struct psb_mmu_pt **tables;
> +	struct page *p;
> +	struct page *dummy_pt;
> +	struct page *dummy_page;
> +	uint32_t pd_mask;
> +	uint32_t invalid_pde;
> +	uint32_t invalid_pte;
> +};
> +
> +static inline uint32_t psb_mmu_pt_index(uint32_t offset)
> +{
> +	return (offset >> PSB_PTE_SHIFT) & 0x3FF;
> +}
> +
> +static inline uint32_t psb_mmu_pd_index(uint32_t offset)
> +{
> +	return offset >> PSB_PDE_SHIFT;
> +}
> +
> +static inline void psb_clflush(void *addr)
> +{
> +	__asm__ __volatile__("clflush (%0)\n" : : "r"(addr) : "memory");
> +}

clflush from system.h

> +static inline void psb_mmu_clflush(struct psb_mmu_driver *driver,
> +				   void *addr)
> +{
> +	if (!driver->has_clflush)
> +		return;
> +
> +	mb();
> +	psb_clflush(addr);
> +	mb();
> +}
> +
> +static void psb_page_clflush(struct psb_mmu_driver *driver, struct page* page)
> +{
> +	uint32_t clflush_add = driver->clflush_add >> PAGE_SHIFT;
> +	uint32_t clflush_count = PAGE_SIZE / clflush_add;
> +	int i;
> +	uint8_t *clf;
> +
> +	clf = kmap_atomic(page, KM_USER0);
> +	mb();
> +	for (i = 0; i < clflush_count; ++i) {
> +		psb_clflush(clf);
> +		clf += clflush_add;
> +	}
> +	mb();
> +	kunmap_atomic(clf, KM_USER0);
> +}
> +
> +static void psb_pages_clflush(struct psb_mmu_driver *driver,
> +				struct page *page[], unsigned long num_pages)
> +{
> +	int i;
> +
> +	if (!driver->has_clflush)
> +		return ;
> +
> +	for (i = 0; i < num_pages; i++)
> +		psb_page_clflush(driver, *page++);
> +}

drm_clflush_pages does that for you.

> +
> +static void psb_mmu_flush_pd_locked(struct psb_mmu_driver *driver,
> +				    int force)
> +{
> +	atomic_set(&driver->needs_tlbflush, 0);
> +}
> +
> +static void psb_mmu_flush_pd(struct psb_mmu_driver *driver, int force)
> +{
> +	down_write(&driver->sem);
> +	psb_mmu_flush_pd_locked(driver, force);
> +	up_write(&driver->sem);
> +}
> +
> +void psb_mmu_flush(struct psb_mmu_driver *driver, int rc_prot)
> +{
> +	if (rc_prot)
> +		down_write(&driver->sem);
> +	if (rc_prot)
> +		up_write(&driver->sem);
> +}
> +
> +void psb_mmu_set_pd_context(struct psb_mmu_pd *pd, int hw_context)
> +{
> +	/*ttm_tt_cache_flush(&pd->p, 1);*/
> +	psb_pages_clflush(pd->driver, &pd->p, 1);
> +	down_write(&pd->driver->sem);
> +	wmb();
> +	psb_mmu_flush_pd_locked(pd->driver, 1);
> +	pd->hw_context = hw_context;
> +	up_write(&pd->driver->sem);
> +
> +}
> +
> +static inline unsigned long psb_pd_addr_end(unsigned long addr,
> +					    unsigned long end)
> +{
> +
> +	addr = (addr + PSB_PDE_MASK + 1) & ~PSB_PDE_MASK;
> +	return (addr < end) ? addr : end;
> +}
> +
> +static inline uint32_t psb_mmu_mask_pte(uint32_t pfn, int type)
> +{
> +	uint32_t mask = PSB_PTE_VALID;
> +
> +	if (type & PSB_MMU_CACHED_MEMORY)
> +		mask |= PSB_PTE_CACHED;
> +	if (type & PSB_MMU_RO_MEMORY)
> +		mask |= PSB_PTE_RO;
> +	if (type & PSB_MMU_WO_MEMORY)
> +		mask |= PSB_PTE_WO;
> +
> +	return (pfn << PAGE_SHIFT) | mask;
> +}
> +
> +struct psb_mmu_pd *psb_mmu_alloc_pd(struct psb_mmu_driver *driver,
> +				    int trap_pagefaults, int invalid_type)
> +{
> +	struct psb_mmu_pd *pd = kmalloc(sizeof(*pd), GFP_KERNEL);
> +	uint32_t *v;
> +	int i;
> +
> +	if (!pd)
> +		return NULL;
> +
> +	pd->p = alloc_page(GFP_DMA32);
> +	if (!pd->p)
> +		goto out_err1;
> +	pd->dummy_pt = alloc_page(GFP_DMA32);
> +	if (!pd->dummy_pt)
> +		goto out_err2;
> +	pd->dummy_page = alloc_page(GFP_DMA32);
> +	if (!pd->dummy_page)
> +		goto out_err3;
> +
> +	if (!trap_pagefaults) {
> +		pd->invalid_pde =
> +		    psb_mmu_mask_pte(page_to_pfn(pd->dummy_pt),
> +				     invalid_type);
> +		pd->invalid_pte =
> +		    psb_mmu_mask_pte(page_to_pfn(pd->dummy_page),
> +				     invalid_type);
> +	} else {
> +		pd->invalid_pde = 0;
> +		pd->invalid_pte = 0;
> +	}
> +
> +	v = kmap(pd->dummy_pt);
> +	for (i = 0; i < (PAGE_SIZE / sizeof(uint32_t)); ++i)
> +		v[i] = pd->invalid_pte;
> +
> +	kunmap(pd->dummy_pt);
> +
> +	v = kmap(pd->p);
> +	for (i = 0; i < (PAGE_SIZE / sizeof(uint32_t)); ++i)
> +		v[i] = pd->invalid_pde;
> +
> +	kunmap(pd->p);
> +
> +	clear_page(kmap(pd->dummy_page));
> +	kunmap(pd->dummy_page);
> +
> +	pd->tables = vmalloc_user(sizeof(struct psb_mmu_pt *) * 1024);
> +	if (!pd->tables)
> +		goto out_err4;
> +
> +	pd->hw_context = -1;
> +	pd->pd_mask = PSB_PTE_VALID;
> +	pd->driver = driver;
> +
> +	return pd;
> +
> +out_err4:
> +	__free_page(pd->dummy_page);
> +out_err3:
> +	__free_page(pd->dummy_pt);
> +out_err2:
> +	__free_page(pd->p);
> +out_err1:
> +	kfree(pd);
> +	return NULL;
> +}
> +
> +void psb_mmu_free_pt(struct psb_mmu_pt *pt)
> +{
> +	__free_page(pt->p);
> +	kfree(pt);
> +}
> +
> +void psb_mmu_free_pagedir(struct psb_mmu_pd *pd)
> +{
> +	struct psb_mmu_driver *driver = pd->driver;
> +	struct psb_mmu_pt *pt;
> +	int i;
> +
> +	down_write(&driver->sem);
> +	if (pd->hw_context != -1)
> +		psb_mmu_flush_pd_locked(driver, 1);
> +
> +	/* Should take the spinlock here, but we don't need to do that
> +	   since we have the semaphore in write mode. */
> +
> +	for (i = 0; i < 1024; ++i) {
> +		pt = pd->tables[i];
> +		if (pt)
> +			psb_mmu_free_pt(pt);
> +	}
> +
> +	vfree(pd->tables);
> +	__free_page(pd->dummy_page);
> +	__free_page(pd->dummy_pt);
> +	__free_page(pd->p);
> +	kfree(pd);
> +	up_write(&driver->sem);
> +}
> +
> +static struct psb_mmu_pt *psb_mmu_alloc_pt(struct psb_mmu_pd *pd)
> +{
> +	struct psb_mmu_pt *pt = kmalloc(sizeof(*pt), GFP_KERNEL);
> +	void *v;
> +	uint32_t clflush_add = pd->driver->clflush_add >> PAGE_SHIFT;
> +	uint32_t clflush_count = PAGE_SIZE / clflush_add;
> +	spinlock_t *lock = &pd->driver->lock;
> +	uint8_t *clf;
> +	uint32_t *ptes;
> +	int i;
> +
> +	if (!pt)
> +		return NULL;
> +
> +	pt->p = alloc_page(GFP_DMA32);
> +	if (!pt->p) {
> +		kfree(pt);
> +		return NULL;
> +	}
> +
> +	spin_lock(lock);
> +
> +	v = kmap_atomic(pt->p, KM_USER0);
> +	clf = (uint8_t *) v;
> +	ptes = (uint32_t *) v;
> +	for (i = 0; i < (PAGE_SIZE / sizeof(uint32_t)); ++i)
> +		*ptes++ = pd->invalid_pte;
> +
> +
> +	if (pd->driver->has_clflush && pd->hw_context != -1) {
> +		mb();
> +		for (i = 0; i < clflush_count; ++i) {
> +			psb_clflush(clf);
> +			clf += clflush_add;
> +		}
> +		mb();
> +	}

I my next patch series for i915 drm_cache.c will grow a
drm_clflush_virt_range, which would perfectly fit here. I'll try not to
forget gma500 ...

> +	kunmap_atomic(v, KM_USER0);
> +	spin_unlock(lock);
> +
> +	pt->count = 0;
> +	pt->pd = pd;
> +	pt->index = 0;
> +
> +	return pt;
> +}
> +
> +struct psb_mmu_pt *psb_mmu_pt_alloc_map_lock(struct psb_mmu_pd *pd,
> +					     unsigned long addr)
> +{
> +	uint32_t index = psb_mmu_pd_index(addr);
> +	struct psb_mmu_pt *pt;
> +	uint32_t *v;
> +	spinlock_t *lock = &pd->driver->lock;
> +
> +	spin_lock(lock);
> +	pt = pd->tables[index];
> +	while (!pt) {
> +		spin_unlock(lock);
> +		pt = psb_mmu_alloc_pt(pd);
> +		if (!pt)
> +			return NULL;
> +		spin_lock(lock);
> +
> +		if (pd->tables[index]) {
> +			spin_unlock(lock);
> +			psb_mmu_free_pt(pt);
> +			spin_lock(lock);
> +			pt = pd->tables[index];
> +			continue;
> +		}
> +
> +		v = kmap_atomic(pd->p, KM_USER0);
> +		pd->tables[index] = pt;
> +		v[index] = (page_to_pfn(pt->p) << 12) | pd->pd_mask;
> +		pt->index = index;
> +		kunmap_atomic((void *) v, KM_USER0);
> +
> +		if (pd->hw_context != -1) {
> +			psb_mmu_clflush(pd->driver, (void *) &v[index]);
> +			atomic_set(&pd->driver->needs_tlbflush, 1);
> +		}
> +	}
> +	pt->v = kmap_atomic(pt->p, KM_USER0);
> +	return pt;
> +}
> +
> +static struct psb_mmu_pt *psb_mmu_pt_map_lock(struct psb_mmu_pd *pd,
> +					      unsigned long addr)
> +{
> +	uint32_t index = psb_mmu_pd_index(addr);
> +	struct psb_mmu_pt *pt;
> +	spinlock_t *lock = &pd->driver->lock;
> +
> +	spin_lock(lock);
> +	pt = pd->tables[index];
> +	if (!pt) {
> +		spin_unlock(lock);
> +		return NULL;
> +	}
> +	pt->v = kmap_atomic(pt->p, KM_USER0);
> +	return pt;
> +}
> +
> +static void psb_mmu_pt_unmap_unlock(struct psb_mmu_pt *pt)
> +{
> +	struct psb_mmu_pd *pd = pt->pd;
> +	uint32_t *v;
> +
> +	kunmap_atomic(pt->v, KM_USER0);
> +	if (pt->count == 0) {
> +		v = kmap_atomic(pd->p, KM_USER0);
> +		v[pt->index] = pd->invalid_pde;
> +		pd->tables[pt->index] = NULL;
> +
> +		if (pd->hw_context != -1) {
> +			psb_mmu_clflush(pd->driver,
> +					(void *) &v[pt->index]);
> +			atomic_set(&pd->driver->needs_tlbflush, 1);
> +		}
> +		kunmap_atomic(pt->v, KM_USER0);
> +		spin_unlock(&pd->driver->lock);
> +		psb_mmu_free_pt(pt);
> +		return;
> +	}
> +	spin_unlock(&pd->driver->lock);
> +}
> +
> +static inline void psb_mmu_set_pte(struct psb_mmu_pt *pt,
> +				   unsigned long addr, uint32_t pte)
> +{
> +	pt->v[psb_mmu_pt_index(addr)] = pte;
> +}
> +
> +static inline void psb_mmu_invalidate_pte(struct psb_mmu_pt *pt,
> +					  unsigned long addr)
> +{
> +	pt->v[psb_mmu_pt_index(addr)] = pt->pd->invalid_pte;
> +}
> +
> +
> +void psb_mmu_mirror_gtt(struct psb_mmu_pd *pd,
> +			uint32_t mmu_offset, uint32_t gtt_start,
> +			uint32_t gtt_pages)
> +{
> +	uint32_t *v;
> +	uint32_t start = psb_mmu_pd_index(mmu_offset);
> +	struct psb_mmu_driver *driver = pd->driver;
> +	int num_pages = gtt_pages;
> +
> +	down_read(&driver->sem);
> +	spin_lock(&driver->lock);
> +
> +	v = kmap_atomic(pd->p, KM_USER0);
> +	v += start;
> +
> +	while (gtt_pages--) {
> +		*v++ = gtt_start | pd->pd_mask;
> +		gtt_start += PAGE_SIZE;
> +	}
> +
> +	/*ttm_tt_cache_flush(&pd->p, num_pages);*/
> +	psb_pages_clflush(pd->driver, &pd->p, num_pages);
> +	kunmap_atomic(v, KM_USER0);
> +	spin_unlock(&driver->lock);
> +
> +	if (pd->hw_context != -1)
> +		atomic_set(&pd->driver->needs_tlbflush, 1);
> +
> +	up_read(&pd->driver->sem);
> +	psb_mmu_flush_pd(pd->driver, 0);
> +}
> +
> +struct psb_mmu_pd *psb_mmu_get_default_pd(struct psb_mmu_driver *driver)
> +{
> +	struct psb_mmu_pd *pd;
> +
> +	/* down_read(&driver->sem); */
> +	pd = driver->default_pd;
> +	/* up_read(&driver->sem); */
> +
> +	return pd;
> +}
> +
> +/* Returns the physical address of the PD shared by sgx/msvdx */
> +uint32_t psb_get_default_pd_addr(struct psb_mmu_driver *driver)
> +{
> +	struct psb_mmu_pd *pd;
> +
> +	pd = psb_mmu_get_default_pd(driver);
> +	return page_to_pfn(pd->p) << PAGE_SHIFT;
> +}
> +
> +void psb_mmu_driver_takedown(struct psb_mmu_driver *driver)
> +{
> +	psb_mmu_free_pagedir(driver->default_pd);
> +	kfree(driver);
> +}
> +
> +struct psb_mmu_driver *psb_mmu_driver_init(uint8_t __iomem * registers,
> +					int trap_pagefaults,
> +					int invalid_type,
> +					struct drm_psb_private *dev_priv)
> +{
> +	struct psb_mmu_driver *driver;
> +
> +	driver = kmalloc(sizeof(*driver), GFP_KERNEL);
> +
> +	if (!driver)
> +		return NULL;
> +	driver->dev_priv = dev_priv;
> +
> +	driver->default_pd = psb_mmu_alloc_pd(driver, trap_pagefaults,
> +					      invalid_type);
> +	if (!driver->default_pd)
> +		goto out_err1;
> +
> +	spin_lock_init(&driver->lock);
> +	init_rwsem(&driver->sem);
> +	down_write(&driver->sem);
> +	driver->register_map = registers;
> +	atomic_set(&driver->needs_tlbflush, 1);
> +
> +	driver->has_clflush = 0;
> +
> +	if (boot_cpu_has(X86_FEATURE_CLFLSH)) {
> +		uint32_t tfms, misc, cap0, cap4, clflush_size;
> +
> +		/*
> +		 * clflush size is determined at kernel setup for x86_64
> +		 *  but not for i386. We have to do it here.
> +		 */
> +
> +		cpuid(0x00000001, &tfms, &misc, &cap0, &cap4);
> +		clflush_size = ((misc >> 8) & 0xff) * 8;
> +		driver->has_clflush = 1;
> +		driver->clflush_add =
> +		    PAGE_SIZE * clflush_size / sizeof(uint32_t);
> +		driver->clflush_mask = driver->clflush_add - 1;
> +		driver->clflush_mask = ~driver->clflush_mask;
> +	}
> +
> +	up_write(&driver->sem);
> +	return driver;
> +
> +out_err1:
> +	kfree(driver);
> +	return NULL;
> +}
> +
> +static void psb_mmu_flush_ptes(struct psb_mmu_pd *pd,
> +			       unsigned long address, uint32_t num_pages,
> +			       uint32_t desired_tile_stride,
> +			       uint32_t hw_tile_stride)
> +{
> +	struct psb_mmu_pt *pt;
> +	uint32_t rows = 1;
> +	uint32_t i;
> +	unsigned long addr;
> +	unsigned long end;
> +	unsigned long next;
> +	unsigned long add;
> +	unsigned long row_add;
> +	unsigned long clflush_add = pd->driver->clflush_add;
> +	unsigned long clflush_mask = pd->driver->clflush_mask;
> +
> +	if (!pd->driver->has_clflush) {
> +		/*ttm_tt_cache_flush(&pd->p, num_pages);*/
> +		psb_pages_clflush(pd->driver, &pd->p, num_pages);
> +		return;
> +	}
> +
> +	if (hw_tile_stride)
> +		rows = num_pages / desired_tile_stride;
> +	else
> +		desired_tile_stride = num_pages;
> +
> +	add = desired_tile_stride << PAGE_SHIFT;
> +	row_add = hw_tile_stride << PAGE_SHIFT;
> +	mb();
> +	for (i = 0; i < rows; ++i) {
> +
> +		addr = address;
> +		end = addr + add;
> +
> +		do {
> +			next = psb_pd_addr_end(addr, end);
> +			pt = psb_mmu_pt_map_lock(pd, addr);
> +			if (!pt)
> +				continue;
> +			do {
> +				psb_clflush(&pt->v
> +					    [psb_mmu_pt_index(addr)]);
> +			} while (addr +=
> +				 clflush_add,
> +				 (addr & clflush_mask) < next);
> +
> +			psb_mmu_pt_unmap_unlock(pt);
> +		} while (addr = next, next != end);
> +		address += row_add;
> +	}
> +	mb();
> +}
> +
> +void psb_mmu_remove_pfn_sequence(struct psb_mmu_pd *pd,
> +				 unsigned long address, uint32_t num_pages)
> +{
> +	struct psb_mmu_pt *pt;
> +	unsigned long addr;
> +	unsigned long end;
> +	unsigned long next;
> +	unsigned long f_address = address;
> +
> +	down_read(&pd->driver->sem);
> +
> +	addr = address;
> +	end = addr + (num_pages << PAGE_SHIFT);
> +
> +	do {
> +		next = psb_pd_addr_end(addr, end);
> +		pt = psb_mmu_pt_alloc_map_lock(pd, addr);
> +		if (!pt)
> +			goto out;
> +		do {
> +			psb_mmu_invalidate_pte(pt, addr);
> +			--pt->count;
> +		} while (addr += PAGE_SIZE, addr < next);
> +		psb_mmu_pt_unmap_unlock(pt);
> +
> +	} while (addr = next, next != end);
> +
> +out:
> +	if (pd->hw_context != -1)
> +		psb_mmu_flush_ptes(pd, f_address, num_pages, 1, 1);
> +
> +	up_read(&pd->driver->sem);
> +
> +	if (pd->hw_context != -1)
> +		psb_mmu_flush(pd->driver, 0);
> +
> +	return;
> +}
> +
> +void psb_mmu_remove_pages(struct psb_mmu_pd *pd, unsigned long address,
> +			  uint32_t num_pages, uint32_t desired_tile_stride,
> +			  uint32_t hw_tile_stride)
> +{
> +	struct psb_mmu_pt *pt;
> +	uint32_t rows = 1;
> +	uint32_t i;
> +	unsigned long addr;
> +	unsigned long end;
> +	unsigned long next;
> +	unsigned long add;
> +	unsigned long row_add;
> +	unsigned long f_address = address;
> +
> +	if (hw_tile_stride)
> +		rows = num_pages / desired_tile_stride;
> +	else
> +		desired_tile_stride = num_pages;
> +
> +	add = desired_tile_stride << PAGE_SHIFT;
> +	row_add = hw_tile_stride << PAGE_SHIFT;
> +
> +	/* down_read(&pd->driver->sem); */
> +
> +	/* Make sure we only need to flush this processor's cache */
> +
> +	for (i = 0; i < rows; ++i) {
> +
> +		addr = address;
> +		end = addr + add;
> +
> +		do {
> +			next = psb_pd_addr_end(addr, end);
> +			pt = psb_mmu_pt_map_lock(pd, addr);
> +			if (!pt)
> +				continue;
> +			do {
> +				psb_mmu_invalidate_pte(pt, addr);
> +				--pt->count;
> +
> +			} while (addr += PAGE_SIZE, addr < next);
> +			psb_mmu_pt_unmap_unlock(pt);
> +
> +		} while (addr = next, next != end);
> +		address += row_add;
> +	}
> +	if (pd->hw_context != -1)
> +		psb_mmu_flush_ptes(pd, f_address, num_pages,
> +				   desired_tile_stride, hw_tile_stride);
> +
> +	/* up_read(&pd->driver->sem); */
> +
> +	if (pd->hw_context != -1)
> +		psb_mmu_flush(pd->driver, 0);
> +}
> +
> +int psb_mmu_insert_pfn_sequence(struct psb_mmu_pd *pd, uint32_t start_pfn,
> +				unsigned long address, uint32_t num_pages,
> +				int type)
> +{
> +	struct psb_mmu_pt *pt;
> +	uint32_t pte;
> +	unsigned long addr;
> +	unsigned long end;
> +	unsigned long next;
> +	unsigned long f_address = address;
> +	int ret = 0;
> +
> +	down_read(&pd->driver->sem);
> +
> +	addr = address;
> +	end = addr + (num_pages << PAGE_SHIFT);
> +
> +	do {
> +		next = psb_pd_addr_end(addr, end);
> +		pt = psb_mmu_pt_alloc_map_lock(pd, addr);
> +		if (!pt) {
> +			ret = -ENOMEM;
> +			goto out;
> +		}
> +		do {
> +			pte = psb_mmu_mask_pte(start_pfn++, type);
> +			psb_mmu_set_pte(pt, addr, pte);
> +			pt->count++;
> +		} while (addr += PAGE_SIZE, addr < next);
> +		psb_mmu_pt_unmap_unlock(pt);
> +
> +	} while (addr = next, next != end);
> +
> +out:
> +	if (pd->hw_context != -1)
> +		psb_mmu_flush_ptes(pd, f_address, num_pages, 1, 1);
> +
> +	up_read(&pd->driver->sem);
> +
> +	if (pd->hw_context != -1)
> +		psb_mmu_flush(pd->driver, 1);
> +
> +	return ret;
> +}
> +
> +int psb_mmu_insert_pages(struct psb_mmu_pd *pd, struct page **pages,
> +			 unsigned long address, uint32_t num_pages,
> +			 uint32_t desired_tile_stride,
> +			 uint32_t hw_tile_stride, int type)
> +{
> +	struct psb_mmu_pt *pt;
> +	uint32_t rows = 1;
> +	uint32_t i;
> +	uint32_t pte;
> +	unsigned long addr;
> +	unsigned long end;
> +	unsigned long next;
> +	unsigned long add;
> +	unsigned long row_add;
> +	unsigned long f_address = address;
> +	int ret = 0;
> +
> +	if (hw_tile_stride) {
> +		if (num_pages % desired_tile_stride != 0)
> +			return -EINVAL;
> +		rows = num_pages / desired_tile_stride;
> +	} else {
> +		desired_tile_stride = num_pages;
> +	}
> +
> +	add = desired_tile_stride << PAGE_SHIFT;
> +	row_add = hw_tile_stride << PAGE_SHIFT;
> +
> +	down_read(&pd->driver->sem);
> +
> +	for (i = 0; i < rows; ++i) {
> +
> +		addr = address;
> +		end = addr + add;
> +
> +		do {
> +			next = psb_pd_addr_end(addr, end);
> +			pt = psb_mmu_pt_alloc_map_lock(pd, addr);
> +			if (!pt) {
> +				ret = -ENOMEM;
> +				goto out;
> +			}
> +			do {
> +				pte =
> +				    psb_mmu_mask_pte(page_to_pfn(*pages++),
> +						     type);
> +				psb_mmu_set_pte(pt, addr, pte);
> +				pt->count++;
> +			} while (addr += PAGE_SIZE, addr < next);
> +			psb_mmu_pt_unmap_unlock(pt);
> +
> +		} while (addr = next, next != end);
> +
> +		address += row_add;
> +	}
> +out:
> +	if (pd->hw_context != -1)
> +		psb_mmu_flush_ptes(pd, f_address, num_pages,
> +				   desired_tile_stride, hw_tile_stride);
> +
> +	up_read(&pd->driver->sem);
> +
> +	if (pd->hw_context != -1)
> +		psb_mmu_flush(pd->driver, 1);
> +
> +	return ret;
> +}
> +
> +int psb_mmu_virtual_to_pfn(struct psb_mmu_pd *pd, uint32_t virtual,
> +			   unsigned long *pfn)
> +{
> +	int ret;
> +	struct psb_mmu_pt *pt;
> +	uint32_t tmp;
> +	spinlock_t *lock = &pd->driver->lock;
> +
> +	down_read(&pd->driver->sem);
> +	pt = psb_mmu_pt_map_lock(pd, virtual);
> +	if (!pt) {
> +		uint32_t *v;
> +
> +		spin_lock(lock);
> +		v = kmap_atomic(pd->p, KM_USER0);
> +		tmp = v[psb_mmu_pd_index(virtual)];
> +		kunmap_atomic(v, KM_USER0);
> +		spin_unlock(lock);
> +
> +		if (tmp != pd->invalid_pde || !(tmp & PSB_PTE_VALID) ||
> +		    !(pd->invalid_pte & PSB_PTE_VALID)) {
> +			ret = -EINVAL;
> +			goto out;
> +		}
> +		ret = 0;
> +		*pfn = pd->invalid_pte >> PAGE_SHIFT;
> +		goto out;
> +	}
> +	tmp = pt->v[psb_mmu_pt_index(virtual)];
> +	if (!(tmp & PSB_PTE_VALID)) {
> +		ret = -EINVAL;
> +	} else {
> +		ret = 0;
> +		*pfn = tmp >> PAGE_SHIFT;
> +	}
> +	psb_mmu_pt_unmap_unlock(pt);
> +out:
> +	up_read(&pd->driver->sem);
> +	return ret;
> +}
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Mail: daniel@ffwll.ch
Mobile: +41 (0)79 365 57 48

Re: [PATCH 01/12] gma500: Move the basic driver out of staging

[Thomas Hellstrom]

On 11/03/2011 07:20 PM, Alan Cox wrote:
> From: Alan Cox<alan@linux.intel.com>
>
> This driver supports unaccelerated KMS display, and accelerated console
> handling on the Intel Poulsbo, Oaktrail, Cedarview and Medfield hardware.
>
> For the initial merge Medfield will be left out as it needs considerable
> further work to reach a decent standard
>
> Begin by adding the Makefiles and Kconfig. These are not yet plumbed into
> the DRM layer so will have no effect on their own
>
> Signed-off-by: Alan Cox<alan@linux.intel.com>
> ---
>    
Alan,

Good to see some of this old code being used.

I haven't followed this work closely, but I have a question:

The first poulsbos used to crash badly  when attempting to map the GTT 
write-combined, and IIRC it didn't even advertise write-combining 
capabilities on the PCI BAR. Has this been improved on lately or how is 
this handled currently?

Thanks,
Thomas

Re: [PATCH 03/12] gma500: introduce the GTT and MMU handling logic

[Alan Cox]

The ioremap for stolen RAM is about 8MB - we do actually need that mapped
for the console framebuffer. The GTT tables are pretty small (64K or so)
and the rest of the GTT space if ever used doesn't get an ioremap.

It's a bit different to the i915 world because the CPU cannot indirect
via the GTT but must go directly.

> Afaik this comment is bogus. And the previous one sounds like it's no
> clear whether this holds (it does, at least for the i915.ko driver). Maybe
> kill them both?

Possibly.


> > +static void psb_pages_clflush(struct psb_mmu_driver *driver,
> > +				struct page *page[], unsigned long num_pages)
> > +{
> > +	int i;
> > +
> > +	if (!driver->has_clflush)
> > +		return ;
> > +
> > +	for (i = 0; i < num_pages; i++)
> > +		psb_page_clflush(driver, *page++);
> > +}
> 
> drm_clflush_pages does that for you.

Ok. Handy to know.

> I my next patch series for i915 drm_cache.c will grow a
> drm_clflush_virt_range, which would perfectly fit here. I'll try not to
> forget gma500 ...

Thanks

Re: [PATCH 01/12] gma500: Move the basic driver out of staging

[Alan Cox]

> The first poulsbos used to crash badly  when attempting to map the GTT 
> write-combined, and IIRC it didn't even advertise write-combining 
> capabilities on the PCI BAR. Has this been improved on lately or how is 
> this handled currently?

It seems to be reliable in the current driver. Whether that is because I
don't use the 3D engine and that causes problems I don't know. One thing
longer term I want to poke at is cachability stuff to see if we can tune
it a bit.

Re: [PATCH 03/12] gma500: introduce the GTT and MMU handling logic

[Daniel Vetter]

On Thu, Nov 03, 2011 at 10:25:18PM +0000, Alan Cox wrote:
> The ioremap for stolen RAM is about 8MB - we do actually need that mapped
> for the console framebuffer. The GTT tables are pretty small (64K or so)
> and the rest of the GTT space if ever used doesn't get an ioremap.
> 
> It's a bit different to the i915 world because the CPU cannot indirect
> via the GTT but must go directly.

Ok, that makes sense. Fyi I'll try to go through the other patches in the
coming days, but might take a while.
-Daniel
-- 
Daniel Vetter
Mail: daniel@ffwll.ch
Mobile: +41 (0)79 365 57 48

Re: [PATCH 08/12] gma500: Add the core DRM files and headers

[Dave Airlie]

On Thu, Nov 3, 2011 at 6:22 PM, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
> From: Alan Cox <alan@linux.intel.com>
>
> Not really a nice way to split this up further for submission. This
> provides all the DRM interfacing logic, the headers and relevant glue.

I've started merging it, and my main review focus is as always the
userspace interfaces, which we are now setting in stone for ever (or
5-10 years whichever is shorter).

So generally we need to provide a userspace interface via ioctls, we
do this with a shared header file that goes in include/drm/ with the
Kbuild bits

Now I'm assuming psb_drm.h is meant to be this file? but as-is its not
really what I'd expect,

If you look at radeon you'll see defines for device specific ioctls,
same for i915, now I note these tables start at 0 and work their way
up,

Now if I understand the holes in this are due to some old userspace
code that is probably broken anyway,

It might be worth renaming psb_drm.h to gma500_drm.h to reflect the
overall driver name and then maybe start with a clean interface, I'm
willing to listen to why this is a bad plan, but I'd rather not push
psb_drm.h into kernel header packages and libdrm if there is a
conflicting one in existance (or conflicting 6).

some more comments below,

> +#define PSB_GPU_ACCESS_READ         (1ULL << 32)
> +#define PSB_GPU_ACCESS_WRITE        (1ULL << 33)
> +#define PSB_GPU_ACCESS_MASK         (PSB_GPU_ACCESS_READ | PSB_GPU_ACCESS_WRITE)
> +
> +#define PSB_BO_FLAG_COMMAND         (1ULL << 52)

Any reason it start at 52?

> +struct drm_psb_mode_operation_arg {
> +       u32 obj_id;
> +       u16 operation;
> +       struct drm_mode_modeinfo mode;
> +       void *data;
> +};

No void * in ioctl args, no u16 in ioctls args, not really sure what a
mode "operation" is here either. Try and design the ioctls to avoid
compat wrapper requirements.
Maybe move the operation flags up here.

> +
> +struct drm_psb_stolen_memory_arg {
> +       u32 base;
> +       u32 size;
> +};

Why does someone care about this? is it a workaround for lack of
decent memory management?


> +/* Controlling the kernel modesetting buffers */
> +
> +#define DRM_PSB_SIZES           0x07
> +#define DRM_PSB_FUSE_REG       0x08
> +#define DRM_PSB_DC_STATE       0x0A
> +#define DRM_PSB_ADB            0x0B
> +#define DRM_PSB_MODE_OPERATION 0x0C
> +#define DRM_PSB_STOLEN_MEMORY  0x0D
> +#define DRM_PSB_REGISTER_RW    0x0E

Direct read/writing of registers is not something, the regs being hit
here seem like workarounds for not having good overlay support in the
kernel perhaps,
can the new plane stuff help workaround this?

> +#define DRM_PSB_GEM_CREATE     0x10
> +#define DRM_PSB_2D_OP          0x11            /* Will be merged later */
> +#define DRM_PSB_GEM_MMAP       0x12
> +#define DRM_PSB_DPST           0x1B
> +#define DRM_PSB_GAMMA          0x1C
> +#define DRM_PSB_DPST_BL                0x1D
> +#define DRM_PSB_GET_PIPE_FROM_CRTC_ID 0x1F

If these are compat with somewhere else please state where the master
database is kept so future people can avoid collisions with closed
source drivers.

> +
> +#define PSB_MODE_OPERATION_MODE_VALID  0x01
> +#define PSB_MODE_OPERATION_SET_DC_BASE  0x02
> +
> +struct drm_psb_get_pipe_from_crtc_id_arg {
> +       /** ID of CRTC being requested **/
> +       u32 crtc_id;
> +
> +       /** pipe of requested CRTC **/
> +       u32 pipe;
> +};

I'm happy that we can fix all these problems incrementally with
patches on top of these, as I take the notion that the userspace
ioctls aren't set in stone until Linus merges and does a release
containing them.

So you can probably considered these patches merged at least, I'll
just keep them in a topic branch which I'll stick into the drm-next
queue.

Dave.

Re: [PATCH 08/12] gma500: Add the core DRM files and headers

[Alan Cox]

> So generally we need to provide a userspace interface via ioctls, we
> do this with a shared header file that goes in include/drm/ with the
> Kbuild bits

At the moment the only public API is the generic bits.

> Now I'm assuming psb_drm.h is meant to be this file? but as-is its not
> really what I'd expect,

Not yet.

> If you look at radeon you'll see defines for device specific ioctls,
> same for i915, now I note these tables start at 0 and work their way
> up,

I'll move the ones we want to zero.

> Now if I understand the holes in this are due to some old userspace
> code that is probably broken anyway,

Yep.. but really I can kill them off. The total number of people affected
will be < 10.

> willing to listen to why this is a bad plan, but I'd rather not push
> psb_drm.h into kernel header packages and libdrm if there is a
> conflicting one in existance (or conflicting 6).

Last time I looked there were conflicts between the various IMG based
Intel ones let along with anything else - lost cause so we might as well
do it right.

We could use a new namespace that might be smarter in fact.

> > +#define PSB_BO_FLAG_COMMAND         (1ULL << 52)
> 
> Any reason it start at 52?

That may be obsolete

> 
> > +struct drm_psb_mode_operation_arg {
> > +       u32 obj_id;
> > +       u16 operation;
> > +       struct drm_mode_modeinfo mode;
> > +       void *data;
> > +};
> 
> No void * in ioctl args, no u16 in ioctls args, not really sure what a
> mode "operation" is here either. Try and design the ioctls to avoid
> compat wrapper requirements.
> Maybe move the operation flags up here.

Again I need to see if we can simply kill it off

> > +
> > +struct drm_psb_stolen_memory_arg {
> > +       u32 base;
> > +       u32 size;
> > +};
> 
> Why does someone care about this? is it a workaround for lack of
> decent memory management?

A smart GMA500 aware server can allocate GEM objects from host memory or
from the stolen memory area. Being smart about it really means knowing
how much stolen memory is so it can see how best to use it.

> > +/* Controlling the kernel modesetting buffers */
> > +
> > +#define DRM_PSB_SIZES           0x07
> > +#define DRM_PSB_FUSE_REG       0x08
> > +#define DRM_PSB_DC_STATE       0x0A
> > +#define DRM_PSB_ADB            0x0B
> > +#define DRM_PSB_MODE_OPERATION 0x0C
> > +#define DRM_PSB_STOLEN_MEMORY  0x0D
> > +#define DRM_PSB_REGISTER_RW    0x0E
> 
> Direct read/writing of registers is not something, the regs being hit
> here seem like workarounds for not having good overlay support in the
> kernel perhaps,
> can the new plane stuff help workaround this?

That can go - its basically left for debugging.
 
> So you can probably considered these patches merged at least, I'll
> just keep them in a topic branch which I'll stick into the drm-next
> queue.

Cool.

I'll take the secateurs to the interfaces.

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel