* [U-Boot] [PATCH 00/13] ARM: more cleanups
@ 2011-12-09 11:14 Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 01/13] drivers/net/ne2000_base.c: Fix GCC 4.6 build warnings Wolfgang Denk
` (12 more replies)
0 siblings, 13 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-09 11:14 UTC (permalink / raw)
To: u-boot
The following patches fix another set of build warnigns, mostly for
ARM boards.
Wolfgang Denk (13):
drivers/net/ne2000_base.c: Fix GCC 4.6 build warnings
drivers/net/at91_emac.c: Fix GCC 4.6 build warnings
fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile warning (and bug)
common/cmd_pxe.c: Fix compile warning
boards.cfg: sort list
board/apollon/apollon.c: Fix GCc 4.6 build warnings.
board/apollon/sys_info.c: Fix GCC 4.6 build warning
ARM: convert "apollon" board to use boards.cfg
board/LaCie/edminiv2/edminiv2.c: Fix build warning
board/ti/omap1610inn/flash.c: Fix GCC 4.6 build warnings
ARM: convert "omap16xx" boards to boards.cfg
board/ti/omap730p2/flash.c: Fix GCC 4.6 build warnings
ARM: convert "omap730p2" boards to boards.cfg
MAKEALL | 4 -
Makefile | 41 -------
board/LaCie/edminiv2/edminiv2.c | 1 +
board/apollon/apollon.c | 18 ++--
board/apollon/sys_info.c | 9 +--
board/ti/omap1610inn/flash.c | 21 ++--
board/ti/omap730p2/flash.c | 19 ++-
boards.cfg | 230 ++++++++++++++++++++------------------
common/cmd_pxe.c | 1 +
drivers/net/at91_emac.c | 42 ++++---
drivers/net/ne2000_base.c | 9 +-
fs/yaffs2/yaffs_guts.c | 2 +-
include/configs/apollon.h | 2 +
13 files changed, 189 insertions(+), 210 deletions(-)
--
1.7.6.4
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 01/13] drivers/net/ne2000_base.c: Fix GCC 4.6 build warnings
2011-12-09 11:14 [U-Boot] [PATCH 00/13] ARM: more cleanups Wolfgang Denk
@ 2011-12-09 11:14 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 02/13] drivers/net/at91_emac.c: " Wolfgang Denk
` (11 subsequent siblings)
12 siblings, 0 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-09 11:14 UTC (permalink / raw)
To: u-boot
Fix:
ne2000_base.c: In function 'dp83902a_send':
ne2000_base.c:282:7: warning: variable 'tmp' set but not used
[-Wunused-but-set-variable]
ne2000_base.c: In function 'dp83902a_RxEvent':
ne2000_base.c:376:5: warning: variable 'rsr' set but not used
[-Wunused-but-set-variable]
ne2000_base.c: In function 'dp83902a_TxEvent':
ne2000_base.c:513:5: warning: variable 'tsr' set but not used
[-Wunused-but-set-variable]
ne2000_base.c: In function 'dp83902a_ClearCounters':
ne2000_base.c:550:17: warning: variable 'cnt3' set but not used
[-Wunused-but-set-variable]
ne2000_base.c:550:11: warning: variable 'cnt2' set but not used
[-Wunused-but-set-variable]
ne2000_base.c:550:5: warning: variable 'cnt1' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
drivers/net/ne2000_base.c | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ne2000_base.c b/drivers/net/ne2000_base.c
index 88f2b37..8275091 100644
--- a/drivers/net/ne2000_base.c
+++ b/drivers/net/ne2000_base.c
@@ -76,6 +76,7 @@ Add SNMP
#include <command.h>
#include <net.h>
#include <malloc.h>
+#include <linux/compiler.h>
/* forward definition of function used for the uboot interface */
void uboot_push_packet_len(int len);
@@ -279,7 +280,7 @@ dp83902a_send(u8 *data, int total_len, u32 key)
* does (i.e., also read data).
*/
- u16 tmp;
+ __maybe_unused u16 tmp;
int len = 1;
DP_OUT(base, DP_RSAL, 0x100 - len);
@@ -373,7 +374,7 @@ dp83902a_RxEvent(void)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
u8 *base = dp->base;
- u8 rsr;
+ __maybe_unused u8 rsr;
u8 rcv_hdr[4];
int i, len, pkt, cur;
@@ -510,7 +511,7 @@ dp83902a_TxEvent(void)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
u8 *base = dp->base;
- u8 tsr;
+ __maybe_unused u8 tsr;
u32 key;
DEBUG_FUNCTION();
@@ -547,7 +548,7 @@ dp83902a_ClearCounters(void)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
u8 *base = dp->base;
- u8 cnt1, cnt2, cnt3;
+ __maybe_unused u8 cnt1, cnt2, cnt3;
DP_IN(base, DP_FER, cnt1);
DP_IN(base, DP_CER, cnt2);
--
1.7.6.4
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 02/13] drivers/net/at91_emac.c: Fix GCC 4.6 build warnings
2011-12-09 11:14 [U-Boot] [PATCH 00/13] ARM: more cleanups Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 01/13] drivers/net/ne2000_base.c: Fix GCC 4.6 build warnings Wolfgang Denk
@ 2011-12-09 11:14 ` Wolfgang Denk
2011-12-10 22:08 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 03/13] fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile warning (and bug) Wolfgang Denk
` (10 subsequent siblings)
12 siblings, 1 reply; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-09 11:14 UTC (permalink / raw)
To: u-boot
Fix:
at91_emac.c: In function 'at91emac_phy_init':
at91_emac.c:244:20: warning: variable 'duplex' set but not used
[-Wunused-but-set-variable]
at91_emac.c:244:13: warning: variable 'speed' set but not used
[-Wunused-but-set-variable]
Use new debug_cond() to fix these warnings. In the result, anumber of
inconsistent printf() formats are detected:
at91_emac.c: In function 'at91emac_read':
at91_emac.c:147:2: warning: format '%x' expects argument of type
'unsigned int', but argument 2 has type 'struct at91_emac_t *'
[-Wformat]
at91_emac.c: In function 'at91emac_write':
at91_emac.c:157:2: warning: format '%x' expects argument of type
'unsigned int', but argument 2 has type 'struct at91_emac_t *'
[-Wformat]
at91_emac.c:157:2: warning: format '%x' expects argument of type
'unsigned int', but argument 4 has type 'short unsigned int *'
[-Wformat]
at91_emac.c: In function 'at91emac_recv':
at91_emac.c:451:3: warning: format '%d' expects argument of type
'int', but argument 2 has type 'long unsigned int' [-Wformat]
at91_emac.c:451:3: warning: format '%x' expects argument of type
'unsigned int', but argument 4 has type 'long unsigned int' [-Wformat]
Fix these, too.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Jens Scharsig <js_at_ng@scharsoft.de>
Cc: Andreas Bie?mann <andreas.devel@gmail.com>
Cc: Reinhard Meyer <u-boot@emk-elektronik.de>
---
drivers/net/at91_emac.c | 42 +++++++++++++++++++++++-------------------
1 files changed, 23 insertions(+), 19 deletions(-)
diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c
index 9bda1fc..483c831 100644
--- a/drivers/net/at91_emac.c
+++ b/drivers/net/at91_emac.c
@@ -69,21 +69,21 @@
#endif
#ifdef ET_DEBUG
-#define DEBUG_AT91EMAC(...) printf(__VA_ARGS__);
+#define DEBUG_AT91EMAC 1
#else
-#define DEBUG_AT91EMAC(...)
+#define DEBUG_AT91EMAC 0
#endif
#ifdef MII_DEBUG
-#define DEBUG_AT91PHY(...) printf(__VA_ARGS__);
+#define DEBUG_AT91PHY 1
#else
-#define DEBUG_AT91PHY(...)
+#define DEBUG_AT91PHY 0
#endif
#ifndef CONFIG_DRIVER_AT91EMAC_QUIET
-#define VERBOSEP(...) printf(__VA_ARGS__);
+#define VERBOSEP 1
#else
-#define VERBOSEP(...)
+#define VERBOSEP 0
#endif
#define RBF_ADDR 0xfffffffc
@@ -137,14 +137,15 @@ int at91emac_read(at91_emac_t *at91mac, unsigned char addr,
do {
netstat = readl(&at91mac->sr);
- DEBUG_AT91PHY("poll SR %08lx\n", netstat);
+ debug_cond(DEBUG_AT91PHY, "poll SR %08lx\n", netstat);
} while (!(netstat & AT91_EMAC_SR_IDLE));
*value = readl(&at91mac->man) & AT91_EMAC_MAN_DATA_MASK;
at91emac_DisableMDIO(at91mac);
- DEBUG_AT91PHY("AT91PHY read %x REG(%d)=%x\n", at91mac, reg, *value)
+ debug_cond(DEBUG_AT91PHY,
+ "AT91PHY read %p REG(%d)=%x\n", at91mac, reg, *value);
return 0;
}
@@ -153,7 +154,8 @@ int at91emac_write(at91_emac_t *at91mac, unsigned char addr,
unsigned char reg, unsigned short value)
{
unsigned long netstat;
- DEBUG_AT91PHY("AT91PHY write %x REG(%d)=%x\n", at91mac, reg, &value)
+ debug_cond(DEBUG_AT91PHY,
+ "AT91PHY write %p REG(%d)=%p\n", at91mac, reg, &value);
at91emac_EnableMDIO(at91mac);
@@ -164,7 +166,7 @@ int at91emac_write(at91_emac_t *at91mac, unsigned char addr,
do {
netstat = readl(&at91mac->sr);
- DEBUG_AT91PHY("poll SR %08lx\n", netstat);
+ debug_cond(DEBUG_AT91PHY, "poll SR %08lx\n", netstat);
} while (!(netstat & AT91_EMAC_SR_IDLE));
at91emac_DisableMDIO(at91mac);
@@ -216,7 +218,7 @@ static int at91emac_phy_reset(struct eth_device *netdev)
adv = ADVERTISE_CSMA | ADVERTISE_ALL;
at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
MII_ADVERTISE, adv);
- VERBOSEP("%s: Starting autonegotiation...\n", netdev->name);
+ debug_cond(VERBOSEP, "%s: Starting autonegotiation...\n", netdev->name);
at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMCR,
(BMCR_ANENABLE | BMCR_ANRESTART));
@@ -229,7 +231,8 @@ static int at91emac_phy_reset(struct eth_device *netdev)
}
if (status & BMSR_ANEGCOMPLETE) {
- VERBOSEP("%s: Autonegotiation complete\n", netdev->name);
+ debug_cond(VERBOSEP,
+ "%s: Autonegotiation complete\n", netdev->name);
} else {
printf("%s: Autonegotiation timed out (status=0x%04x)\n",
netdev->name, status);
@@ -272,7 +275,7 @@ static int at91emac_phy_init(struct eth_device *netdev)
}
}
if (!(status & BMSR_LSTATUS)) {
- VERBOSEP("%s: link down\n", netdev->name);
+ debug_cond(VERBOSEP, "%s: link down\n", netdev->name);
return -3;
} else {
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
@@ -283,7 +286,7 @@ static int at91emac_phy_init(struct eth_device *netdev)
speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
? 1 : 0);
duplex = (media & ADVERTISE_FULL) ? 1 : 0;
- VERBOSEP("%s: link up, %sMbps %s-duplex\n",
+ debug_cond(VERBOSEP, "%s: link up, %sMbps %s-duplex\n",
netdev->name,
speed ? "100" : "10",
duplex ? "full" : "half");
@@ -409,7 +412,7 @@ static void at91emac_halt(struct eth_device *netdev)
emac = (at91_emac_t *) netdev->iobase;
writel(readl(&emac->ctl) & ~(AT91_EMAC_CTL_TE | AT91_EMAC_CTL_RE),
&emac->ctl);
- DEBUG_AT91EMAC("halt MAC\n");
+ debug_cond(DEBUG_AT91EMAC, "halt MAC\n");
}
static int at91emac_send(struct eth_device *netdev, volatile void *packet,
@@ -425,7 +428,7 @@ static int at91emac_send(struct eth_device *netdev, volatile void *packet,
writel(AT91_EMAC_TCR_LEN(length), &emac->tcr);
while (AT91_EMAC_TCR_LEN(readl(&emac->tcr)))
;
- DEBUG_AT91EMAC("Send %d \n", length);
+ debug_cond(DEBUG_AT91EMAC, "Send %d\n", length);
writel(readl(&emac->tsr) | AT91_EMAC_TSR_COMP, &emac->tsr);
return 0;
}
@@ -445,7 +448,7 @@ static int at91emac_recv(struct eth_device *netdev)
size = rbfp->size & RBF_SIZE;
NetReceive(NetRxPackets[dev->rbindex], size);
- DEBUG_AT91EMAC("Recv[%d]: %d bytes @ %x \n",
+ debug_cond(DEBUG_AT91EMAC, "Recv[%ld]: %d bytes @ %lx\n",
dev->rbindex, size, rbfp->addr);
rbfp->addr &= ~RBF_OWNER;
@@ -479,14 +482,15 @@ static int at91emac_write_hwaddr(struct eth_device *netdev)
emac = (at91_emac_t *) netdev->iobase;
writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
- DEBUG_AT91EMAC("init MAC-ADDR %02x:%02x:%02x:%02x:%02x:%02x\n",
+ debug_cond(DEBUG_AT91EMAC,
+ "init MAC-ADDR %02x:%02x:%02x:%02x:%02x:%02x\n",
netdev->enetaddr[5], netdev->enetaddr[4], netdev->enetaddr[3],
netdev->enetaddr[2], netdev->enetaddr[1], netdev->enetaddr[0]);
writel( (netdev->enetaddr[0] | netdev->enetaddr[1] << 8 |
netdev->enetaddr[2] << 16 | netdev->enetaddr[3] << 24),
&emac->sa2l);
writel((netdev->enetaddr[4] | netdev->enetaddr[5] << 8), &emac->sa2h);
- DEBUG_AT91EMAC("init MAC-ADDR %x%x \n",
+ debug_cond(DEBUG_AT91EMAC, "init MAC-ADDR %x%x\n",
readl(&emac->sa2h), readl(&emac->sa2l));
return 0;
}
--
1.7.6.4
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 03/13] fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile warning (and bug)
2011-12-09 11:14 [U-Boot] [PATCH 00/13] ARM: more cleanups Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 01/13] drivers/net/ne2000_base.c: Fix GCC 4.6 build warnings Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 02/13] drivers/net/at91_emac.c: " Wolfgang Denk
@ 2011-12-09 11:14 ` Wolfgang Denk
2011-12-09 11:36 ` William Juul
2011-12-10 22:08 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 04/13] common/cmd_pxe.c: Fix compile warning Wolfgang Denk
` (9 subsequent siblings)
12 siblings, 2 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-09 11:14 UTC (permalink / raw)
To: u-boot
Fix:
yaffs_guts.c: In function 'yaffs_GarbageCollectBlock':
yaffs_guts.c:2761:6: warning: variable 'retVal' set but not used
[-Wunused-but-set-variable]
Here GCC actually detected a bug. The code was always returning OK
instead of the previously set retrun code. Fix that.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: William Juul <william.juul@tandberg.com>
Cc: Scott Wood <scottwood@freescale.com>
---
fs/yaffs2/yaffs_guts.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/fs/yaffs2/yaffs_guts.c b/fs/yaffs2/yaffs_guts.c
index f0ef8db..7390b40 100644
--- a/fs/yaffs2/yaffs_guts.c
+++ b/fs/yaffs2/yaffs_guts.c
@@ -2976,7 +2976,7 @@ static int yaffs_GarbageCollectBlock(yaffs_Device * dev, int block)
dev->isDoingGC = 0;
- return YAFFS_OK;
+ return retVal;
}
/* New garbage collector
--
1.7.6.4
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 04/13] common/cmd_pxe.c: Fix compile warning
2011-12-09 11:14 [U-Boot] [PATCH 00/13] ARM: more cleanups Wolfgang Denk
` (2 preceding siblings ...)
2011-12-09 11:14 ` [U-Boot] [PATCH 03/13] fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile warning (and bug) Wolfgang Denk
@ 2011-12-09 11:14 ` Wolfgang Denk
2011-12-09 13:48 ` Jason Hobbs
2011-12-09 11:14 ` [U-Boot] [PATCH 05/13] boards.cfg: sort list Wolfgang Denk
` (8 subsequent siblings)
12 siblings, 1 reply; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-09 11:14 UTC (permalink / raw)
To: u-boot
Fix:
cmd_pxe.c: In function 'parse_pxefile_top':
cmd_pxe.c:941:5: warning: 'err' may be used uninitialized in this
function [-Wuninitialized]
cmd_pxe.c:921:6: note: 'err' was declared here
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Jason Hobbs <jason.hobbs@calxeda.com>
---
common/cmd_pxe.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/common/cmd_pxe.c b/common/cmd_pxe.c
index 9426f5b..eaf95bf 100644
--- a/common/cmd_pxe.c
+++ b/common/cmd_pxe.c
@@ -936,6 +936,7 @@ static int parse_menu(char **c, struct pxe_menu *cfg, char *b, int nest_level)
default:
printf("Ignoring malformed menu command: %.*s\n",
(int)(*c - s), s);
+ err = -1;
}
if (err < 0)
--
1.7.6.4
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 05/13] boards.cfg: sort list
2011-12-09 11:14 [U-Boot] [PATCH 00/13] ARM: more cleanups Wolfgang Denk
` (3 preceding siblings ...)
2011-12-09 11:14 ` [U-Boot] [PATCH 04/13] common/cmd_pxe.c: Fix compile warning Wolfgang Denk
@ 2011-12-09 11:14 ` Wolfgang Denk
2011-12-10 22:09 ` Wolfgang Denk
2011-12-10 22:39 ` Mike Frysinger
2011-12-09 11:14 ` [U-Boot] [PATCH 06/13] board/apollon/apollon.c: Fix GCc 4.6 build warnings Wolfgang Denk
` (7 subsequent siblings)
12 siblings, 2 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-09 11:14 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
boards.cfg | 218 ++++++++++++++++++++++++++++++------------------------------
1 files changed, 109 insertions(+), 109 deletions(-)
diff --git a/boards.cfg b/boards.cfg
index 12f5f6f..4a4968d 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -36,13 +36,13 @@
###########################################################################################################
integratorcp_cm1136 arm arm1136 integrator armltd - integratorcp:CM1136
-qong arm arm1136 - davedenx mx31
-mx31ads arm arm1136 - freescale mx31
-imx31_litekit arm arm1136 - logicpd mx31
imx31_phycore arm arm1136 - - mx31
imx31_phycore_eet arm arm1136 imx31_phycore - mx31 imx31_phycore:IMX31_PHYCORE_EET
+qong arm arm1136 - davedenx mx31
+mx31ads arm arm1136 - freescale mx31
mx31pdk arm arm1136 - freescale mx31 mx31pdk:NAND_U_BOOT
tt01 arm arm1136 - hale mx31
+imx31_litekit arm arm1136 - logicpd mx31
flea3 arm arm1136 - CarMediaLab mx35
mx35pdk arm arm1136 - freescale mx35
omap2420h4 arm arm1136 - ti omap24xx
@@ -65,51 +65,40 @@ smdk2410 arm arm920t - samsung
omap1510inn arm arm925t - ti
integratorap_cm926ejs arm arm926ejs integrator armltd - integratorap:CM926EJ_S
integratorcp_cm926ejs arm arm926ejs integrator armltd - integratorcp:CM924EJ_S
-versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB
-versatilepb arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_PB
-versatileab arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_AB
aspenite arm arm926ejs - Marvell armada100
gplugd arm arm926ejs - Marvell armada100
afeb9260 arm arm926ejs - - at91
-at91sam9260ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_NANDFLASH
at91sam9260ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS0
at91sam9260ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS1
-at91sam9261ek_nandflash arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9261,SYS_USE_NANDFLASH
+at91sam9260ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_NANDFLASH
at91sam9261ek_dataflash_cs0 arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9261,SYS_USE_DATAFLASH_CS0
at91sam9261ek_dataflash_cs3 arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9261,SYS_USE_DATAFLASH_CS3
-at91sam9263ek_nandflash arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_NANDFLASH
-at91sam9263ek_dataflash_cs0 arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_DATAFLASH
+at91sam9261ek_nandflash arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9261,SYS_USE_NANDFLASH
at91sam9263ek_dataflash arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_DATAFLASH
+at91sam9263ek_dataflash_cs0 arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_DATAFLASH
+at91sam9263ek_nandflash arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_NANDFLASH
at91sam9263ek_norflash arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_NORFLASH
at91sam9263ek_norflash_boot arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_BOOT_NORFLASH
-at91sam9g10ek_nandflash arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_NANDFLASH
at91sam9g10ek_dataflash_cs0 arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_DATAFLASH_CS0
at91sam9g10ek_dataflash_cs3 arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_DATAFLASH_CS3
-at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH
+at91sam9g10ek_nandflash arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_NANDFLASH
at91sam9g20ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS0
at91sam9g20ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS1
+at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH
at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH
-at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH
at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH
-at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH
+at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH
at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0
at91sam9xeek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1
+at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH
snapper9260 arm arm926ejs - bluewater at91 snapper9260:AT91SAM9260
snapper9g20 arm arm926ejs snapper9260 bluewater at91 snapper9260:AT91SAM9G20
-sbc35_a9g20_nandflash arm arm926ejs sbc35_a9g20 calao at91 sbc35_a9g20:AT91SAM9G20,SYS_USE_NANDFLASH
sbc35_a9g20_eeprom arm arm926ejs sbc35_a9g20 calao at91 sbc35_a9g20:AT91SAM9G20,SYS_USE_EEPROM
-tny_a9g20_nandflash arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9G20,SYS_USE_NANDFLASH
-tny_a9g20_eeprom arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9G20,SYS_USE_EEPROM
-tny_a9260_nandflash arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9260,SYS_USE_NANDFLASH
+sbc35_a9g20_nandflash arm arm926ejs sbc35_a9g20 calao at91 sbc35_a9g20:AT91SAM9G20,SYS_USE_NANDFLASH
tny_a9260_eeprom arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9260,SYS_USE_EEPROM
-cpu9260 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260
-cpu9260_nand arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,NANDBOOT
-cpu9260_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,CPU9260_128M
-cpu9260_nand_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,CPU9260_128M,NANDBOOT
-cpu9G20 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20
-cpu9G20_nand arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,NANDBOOT
-cpu9G20_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,CPU9G20_128M
-cpu9G20_nand_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,CPU9G20_128M,NANDBOOT
+tny_a9260_nandflash arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9260,SYS_USE_NANDFLASH
+tny_a9g20_eeprom arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9G20,SYS_USE_EEPROM
+tny_a9g20_nandflash arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9G20,SYS_USE_NANDFLASH
ethernut5 arm arm926ejs ethernut5 egnite at91 ethernut5:AT91SAM9XE
top9000eval_xe arm arm926ejs top9000 emk at91 top9000:EVAL9000
top9000su_xe arm arm926ejs top9000 emk at91 top9000:SU9000
@@ -117,17 +106,21 @@ meesc arm arm926ejs meesc esd
meesc_dataflash arm arm926ejs meesc esd at91 meesc:AT91SAM9263,SYS_USE_DATAFLASH
otc570 arm arm926ejs otc570 esd at91 otc570:AT91SAM9263,SYS_USE_NANDFLASH
otc570_dataflash arm arm926ejs otc570 esd at91 otc570:AT91SAM9263,SYS_USE_DATAFLASH
+cpu9260 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260
+cpu9260_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,CPU9260_128M
+cpu9260_nand arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,NANDBOOT
+cpu9260_nand_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,CPU9260_128M,NANDBOOT
+cpu9G20 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20
+cpu9G20_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,CPU9G20_128M
+cpu9G20_nand arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,NANDBOOT
+cpu9G20_nand_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,CPU9G20_128M,NANDBOOT
pm9261 arm arm926ejs pm9261 ronetix at91 pm9261:AT91SAM9261
pm9263 arm arm926ejs pm9263 ronetix at91 pm9263:AT91SAM9263
pm9g45 arm arm926ejs pm9g45 ronetix at91 pm9g45:AT91SAM9G45
+cam_enc_4xx arm arm926ejs cam_enc_4xx ait davinci cam_enc_4xx
da830evm arm arm926ejs da8xxevm davinci davinci
-da850evm arm arm926ejs da8xxevm davinci davinci
da850_am18xxevm arm arm926ejs da8xxevm davinci davinci
-cam_enc_4xx arm arm926ejs cam_enc_4xx ait davinci cam_enc_4xx
-hawkboard arm arm926ejs da8xxevm davinci davinci
-hawkboard_nand arm arm926ejs da8xxevm davinci davinci hawkboard:NAND_U_BOOT
-hawkboard_uart arm arm926ejs da8xxevm davinci davinci hawkboard:UART_U_BOOT
-ea20 arm arm926ejs ea20 davinci davinci
+da850evm arm arm926ejs da8xxevm davinci davinci
davinci_dm355evm arm arm926ejs dm355evm davinci davinci
davinci_dm355leopard arm arm926ejs dm355leopard davinci davinci
davinci_dm365evm arm arm926ejs dm365evm davinci davinci
@@ -137,6 +130,10 @@ davinci_dvevm arm arm926ejs dvevm davinci
davinci_schmoogie arm arm926ejs schmoogie davinci davinci
davinci_sffsdr arm arm926ejs sffsdr davinci davinci
davinci_sonata arm arm926ejs sonata davinci davinci
+ea20 arm arm926ejs ea20 davinci davinci
+hawkboard arm arm926ejs da8xxevm davinci davinci
+hawkboard_nand arm arm926ejs da8xxevm davinci davinci hawkboard:NAND_U_BOOT
+hawkboard_uart arm arm926ejs da8xxevm davinci davinci hawkboard:UART_U_BOOT
enbw_cmc arm arm926ejs enbw_cmc enbw davinci
km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_DISABLE_PCI
km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_RECONFIG_XLX
@@ -144,8 +141,8 @@ mgcoge3un arm arm926ejs km_arm keymile
portl2 arm arm926ejs km_arm keymile kirkwood
inetspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:INETSPACE_V2
net2big_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:NET2BIG_V2
-netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_V2
netspace_max_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MAX_V2
+netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_V2
dreamplug arm arm926ejs - Marvell kirkwood
guruplug arm arm926ejs - Marvell kirkwood
mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood
@@ -167,11 +164,14 @@ nhk8815_onenand arm arm926ejs nhk8815 st
omap5912osk arm arm926ejs - ti omap
edminiv2 arm arm926ejs - LaCie orion5x
dkb arm arm926ejs - Marvell pantheon
+versatileab arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_AB
+versatilepb arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_PB
+versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB
integratorap_cm946es arm arm946es integrator armltd - integratorap:CM946ES
integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES
ca9x4_ct_vxp arm armv7 vexpress armltd
-highbank arm armv7 highbank - highbank
am335x_evm arm armv7 am335x ti am33xx
+highbank arm armv7 highbank - highbank
efikamx arm armv7 efikamx - mx5 efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/efikamx/imximage_mx.cfg
efikasb arm armv7 efikamx - mx5 efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/efikamx/imximage_sb.cfg
mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
@@ -183,14 +183,14 @@ vision2 arm armv7 vision2 ttcontr
cm_t35 arm armv7 cm_t35 - omap3
omap3_overo arm armv7 overo - omap3
omap3_pandora arm armv7 pandora - omap3
+dig297 arm armv7 dig297 comelit omap3
igep0020 arm armv7 igep0020 isee omap3
igep0030 arm armv7 igep0030 isee omap3
-am3517_crane arm armv7 am3517crane ti omap3
am3517_evm arm armv7 am3517evm logicpd omap3
-dig297 arm armv7 dig297 comelit omap3
omap3_zoom1 arm armv7 zoom1 logicpd omap3
omap3_zoom2 arm armv7 zoom2 logicpd omap3
omap3_mvblx arm armv7 mvblx matrix_vision omap3
+am3517_crane arm armv7 am3517crane ti omap3
omap3_beagle arm armv7 beagle ti omap3
omap3_evm arm armv7 evm ti omap3
omap3_evm_quick_mmc arm armv7 evm ti omap3
@@ -209,15 +209,14 @@ harmony arm armv7 harmony nvidia
seaboard arm armv7 seaboard nvidia tegra2
u8500_href arm armv7 u8500 st-ericsson u8500
actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2
-actux1_8_16 arm ixp actux1 - - actux1:FLASH1X8
actux1_4_32 arm ixp actux1 - - actux1:FLASH2X2,RAM_32MB
+actux1_8_16 arm ixp actux1 - - actux1:FLASH1X8
actux1_8_32 arm ixp actux1 - - actux1:FLASH1X8,RAM_32MB
actux2 arm ixp
actux3 arm ixp
actux4 arm ixp
dvlhost arm ixp
balloon3 arm pxa
-colibri_pxa270 arm pxa - toradex
lubbock arm pxa
palmld arm pxa
palmtc arm pxa
@@ -229,6 +228,7 @@ vpac270_nor_256 arm pxa vpac270 -
vpac270_ond_256 arm pxa vpac270 - - vpac270:ONENAND,RAM_256M
xaeniax arm pxa
zipitz2 arm pxa
+colibri_pxa270 arm pxa - toradex
jornada arm sa1100
atngw100 avr32 at32ap - atmel at32ap700x
atstk1002 avr32 at32ap atstk1000 atmel at32ap700x
@@ -271,11 +271,14 @@ ibf-dsp561 blackfin blackfin
ip04 blackfin blackfin
tcm-bf518 blackfin blackfin
tcm-bf537 blackfin blackfin
-eNET x86 x86 eNET - sc520 eNET:SYS_TEXT_BASE=0x38040000
-eNET_SRAM x86 x86 eNET - sc520 eNET:SYS_TEXT_BASE=0x19000000
-sandbox sandbox sandbox sandbox sandbox -
+M52277EVB m68k mcf5227x m52277evb freescale - M52277EVB:SYS_SPANSION_BOOT,SYS_TEXT_BASE=0x00000000
+M52277EVB_stmicro m68k mcf5227x m52277evb freescale - M52277EVB:CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x43E00000
+M5235EVB m68k mcf523x m5235evb freescale - M5235EVB:SYS_TEXT_BASE=0xFFE00000
+M5235EVB_Flash32 m68k mcf523x m5235evb freescale - M5235EVB:NORFLASH_PS32BIT,SYS_TEXT_BASE=0xFFC00000
cobra5272 m68k mcf52x2 cobra5272 -
idmr m68k mcf52x2
+EB-MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS - EB+MCF-EV123:SYS_TEXT_BASE=0xFFE00000
+EB-MCF-EV123_internal m68k mcf52x2 EB+MCF-EV123 BuS - EB+MCF-EV123:SYS_TEXT_BASE=0xF0000000
TASREG m68k mcf52x2 tasreg esd
M5208EVBE m68k mcf52x2 m5208evbe freescale
M5249EVB m68k mcf52x2 m5249evb freescale
@@ -285,24 +288,18 @@ M5271EVB m68k mcf52x2 m5271evb freesca
M5272C3 m68k mcf52x2 m5272c3 freescale
M5275EVB m68k mcf52x2 m5275evb freescale
M5282EVB m68k mcf52x2 m5282evb freescale
-M52277EVB m68k mcf5227x m52277evb freescale - M52277EVB:SYS_SPANSION_BOOT,SYS_TEXT_BASE=0x00000000
-M52277EVB_stmicro m68k mcf5227x m52277evb freescale - M52277EVB:CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x43E00000
-EB-MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS - EB+MCF-EV123:SYS_TEXT_BASE=0xFFE00000
-EB-MCF-EV123_internal m68k mcf52x2 EB+MCF-EV123 BuS - EB+MCF-EV123:SYS_TEXT_BASE=0xF0000000
-M5235EVB m68k mcf523x m5235evb freescale - M5235EVB:SYS_TEXT_BASE=0xFFE00000
-M5235EVB_Flash32 m68k mcf523x m5235evb freescale - M5235EVB:NORFLASH_PS32BIT,SYS_TEXT_BASE=0xFFC00000
-M54455EVB m68k mcf5445x m54455evb freescale - M54455EVB:SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=33333333
-M54455EVB_intel m68k mcf5445x m54455evb freescale - M54455EVB:SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=33333333
-M54455EVB_a66 m68k mcf5445x m54455evb freescale - M54455EVB:SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=66666666
-M54455EVB_i66 m68k mcf5445x m54455evb freescale - M54455EVB:SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=66666666
-M54455EVB_stm33 m68k mcf5445x m54455evb freescale - M54455EVB:SYS_STMICRO_BOOT,CF_SBF,SYS_TEXT_BASE=0x4FE00000,SYS_INPUT_CLKSRC=33333333
-M54451EVB m68k mcf5445x m54451evb freescale - M54451EVB:SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=24000000
-M54451EVB_stmicro m68k mcf5445x m54451evb freescale - M54451EVB:CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x47e00000,SYS_INPUT_CLKSRC=24000000
astro_mcf5373l m68k mcf532x mcf5373l astro
M53017EVB m68k mcf532x m53017evb freescale
M5329AFEE m68k mcf532x m5329evb freescale - M5329EVB:NANDFLASH_SIZE=0
M5329BFEE m68k mcf532x m5329evb freescale - M5329EVB:NANDFLASH_SIZE=16
M5373EVB m68k mcf532x m5373evb freescale - M5373EVB:NANDFLASH_SIZE=16
+M54451EVB m68k mcf5445x m54451evb freescale - M54451EVB:SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=24000000
+M54451EVB_stmicro m68k mcf5445x m54451evb freescale - M54451EVB:CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x47e00000,SYS_INPUT_CLKSRC=24000000
+M54455EVB m68k mcf5445x m54455evb freescale - M54455EVB:SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=33333333
+M54455EVB_a66 m68k mcf5445x m54455evb freescale - M54455EVB:SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=66666666
+M54455EVB_i66 m68k mcf5445x m54455evb freescale - M54455EVB:SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=66666666
+M54455EVB_intel m68k mcf5445x m54455evb freescale - M54455EVB:SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=33333333
+M54455EVB_stm33 m68k mcf5445x m54455evb freescale - M54455EVB:SYS_STMICRO_BOOT,CF_SBF,SYS_TEXT_BASE=0x4FE00000,SYS_INPUT_CLKSRC=33333333
M5475AFE m68k mcf547x_8x m547xevb freescale - M5475EVB:SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64
M5475BFE m68k mcf547x_8x m547xevb freescale - M5475EVB:SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16
M5475CFE m68k mcf547x_8x m547xevb freescale - M5475EVB:SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO,SYS_USBCTRL
@@ -319,35 +316,35 @@ M5485FFE m68k mcf547x_8x m548xevb freescale -
M5485GFE m68k mcf547x_8x m548xevb freescale - M5485EVB:SYS_BUSCLK=100000000,SYS_BOOTSZ=4,SYS_DRAMSZ=64
M5485HFE m68k mcf547x_8x m548xevb freescale - M5485EVB:SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO
microblaze-generic microblaze microblaze microblaze-generic xilinx
+qemu_mips mips mips32 qemu-mips - - qemu-mips
+tb0229 mips mips32
+vct_platinum mips mips32 vct micronas - vct:VCT_PLATINUM
+vct_platinumavc mips mips32 vct micronas - vct:VCT_PLATINUMAVC
+vct_platinumavc_onenand mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND
+vct_platinumavc_onenand_small mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND,VCT_SMALL_IMAGE
+vct_platinumavc_small mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_SMALL_IMAGE
+vct_platinum_onenand mips mips32 vct micronas - vct:VCT_PLATINUM,VCT_ONENAND
+vct_platinum_onenand_small mips mips32 vct micronas - vct:VCT_PLATINUM,VCT_ONENAND,VCT_SMALL_IMAGE
+vct_platinum_small mips mips32 vct micronas - vct:VCT_PLATINUM,VCT_SMALL_IMAGE
+vct_premium mips mips32 vct micronas - vct:VCT_PREMIUM
+vct_premium_onenand mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_ONENAND
+vct_premium_onenand_small mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_ONENAND,VCT_SMALL_IMAGE
+vct_premium_small mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_SMALL_IMAGE
dbau1000 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1000
dbau1100 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1100
dbau1500 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1500
dbau1550 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1550
dbau1550_el mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1550
gth2 mips mips32 - - au1x00
+pb1000 mips mips32 pb1x00 - au1x00 pb1x00:PB1000
incaip mips mips32 incaip - incaip
incaip_100MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=100000000
incaip_133MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=133000000
incaip_150MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=150000000
-pb1000 mips mips32 pb1x00 - au1x00 pb1x00:PB1000
-qemu_mips mips mips32 qemu-mips - - qemu-mips
-tb0229 mips mips32
-vct_premium mips mips32 vct micronas - vct:VCT_PREMIUM
-vct_premium_small mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_SMALL_IMAGE
-vct_premium_onenand mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_ONENAND
-vct_premium_onenand_small mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_ONENAND,VCT_SMALL_IMAGE
-vct_platinum mips mips32 vct micronas - vct:VCT_PLATINUM
-vct_platinum_small mips mips32 vct micronas - vct:VCT_PLATINUM,VCT_SMALL_IMAGE
-vct_platinum_onenand mips mips32 vct micronas - vct:VCT_PLATINUM,VCT_ONENAND
-vct_platinum_onenand_small mips mips32 vct micronas - vct:VCT_PLATINUM,VCT_ONENAND,VCT_SMALL_IMAGE
-vct_platinumavc mips mips32 vct micronas - vct:VCT_PLATINUMAVC
-vct_platinumavc_small mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_SMALL_IMAGE
-vct_platinumavc_onenand mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND
-vct_platinumavc_onenand_small mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND,VCT_SMALL_IMAGE
qi_lb60 mips xburst qi_lb60 qi
-nios2-generic nios2 nios2 nios2-generic altera
adp-ag101 nds32 n1213 adp-ag101 AndesTech ag101
adp-ag101p nds32 n1213 adp-ag101p AndesTech ag101
+nios2-generic nios2 nios2 nios2-generic altera
PCI5441 nios2 nios2 pci5441 psyent
PK1C20 nios2 nios2 pk1c20 psyent
EVB64260 powerpc 74xx_7xx evb64260 - - EVB64260
@@ -375,10 +372,6 @@ a4m072 powerpc mpc5xxx a4m072
BC3450 powerpc mpc5xxx bc3450
canmb powerpc mpc5xxx
cm5200 powerpc mpc5xxx
-digsy_mtc powerpc mpc5xxx digsy_mtc intercontrol
-digsy_mtc_RAMBOOT powerpc mpc5xxx digsy_mtc intercontrol - digsy_mtc:SYS_TEXT_BASE=0x00100000
-digsy_mtc_rev5 powerpc mpc5xxx digsy_mtc intercontrol - digsy_mtc:DIGSY_REV5
-digsy_mtc_rev5_RAMBOOT powerpc mpc5xxx digsy_mtc intercontrol - digsy_mtc:SYS_TEXT_BASE=0x00100000,DIGSY_REV5
galaxy5200 powerpc mpc5xxx galaxy5200 - - galaxy5200:galaxy5200
galaxy5200_LOWBOOT powerpc mpc5xxx galaxy5200 - - galaxy5200:galaxy5200_LOWBOOT
icecube_5200 powerpc mpc5xxx icecube - - IceCube
@@ -426,6 +419,10 @@ TOP5200 powerpc mpc5xxx top5200 emk
cpci5200 powerpc mpc5xxx - esd
mecp5200 powerpc mpc5xxx - esd
pf5200 powerpc mpc5xxx - esd
+digsy_mtc powerpc mpc5xxx digsy_mtc intercontrol
+digsy_mtc_RAMBOOT powerpc mpc5xxx digsy_mtc intercontrol - digsy_mtc:SYS_TEXT_BASE=0x00100000
+digsy_mtc_rev5 powerpc mpc5xxx digsy_mtc intercontrol - digsy_mtc:DIGSY_REV5
+digsy_mtc_rev5_RAMBOOT powerpc mpc5xxx digsy_mtc intercontrol - digsy_mtc:SYS_TEXT_BASE=0x00100000,DIGSY_REV5
hmi1001 powerpc mpc5xxx - manroland
mucmc52 powerpc mpc5xxx - manroland
uc101 powerpc mpc5xxx - manroland
@@ -561,16 +558,16 @@ MPC8349EMDS powerpc mpc83xx mpc8349emds freesca
MPC8349ITX powerpc mpc83xx mpc8349itx freescale - MPC8349ITX:MPC8349ITX
MPC8349ITXGP powerpc mpc83xx mpc8349itx freescale - MPC8349ITX:MPC8349ITXGP,SYS_TEXT_BASE=0xFE000000
MPC8349ITX_LOWBOOT powerpc mpc83xx mpc8349itx freescale - MPC8349ITX:MPC8349ITX,SYS_TEXT_BASE=0xFE000000
-MPC8360EMDS_66 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ
MPC8360EMDS_33 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_33MHZ
-MPC8360EMDS_66_ATM powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ,PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1
MPC8360EMDS_33_ATM powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_33MHZ,PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1
-MPC8360EMDS_66_HOST_33 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ,PCI,PCI_33M,PQ_MDS_PIB=1
MPC8360EMDS_33_HOST_33 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_33MHZ,PCI,PCI_33M,PQ_MDS_PIB=1
-MPC8360EMDS_66_HOST_66 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ,PCI,PCI_66M,PQ_MDS_PIB=1
MPC8360EMDS_33_HOST_66 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_33MHZ,PCI,PCI_66M,PQ_MDS_PIB=1
-MPC8360EMDS_66_SLAVE powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ,PCI,PCISLAVE
MPC8360EMDS_33_SLAVE powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_33MHZ,PCI,PCISLAVE
+MPC8360EMDS_66 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ
+MPC8360EMDS_66_ATM powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ,PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1
+MPC8360EMDS_66_HOST_33 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ,PCI,PCI_33M,PQ_MDS_PIB=1
+MPC8360EMDS_66_HOST_66 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ,PCI,PCI_66M,PQ_MDS_PIB=1
+MPC8360EMDS_66_SLAVE powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:CLKIN_66MHZ,PCI,PCISLAVE
MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale - MPC8360ERDK
MPC8360ERDK_33 powerpc mpc83xx mpc8360erdk freescale - MPC8360ERDK:CLKIN_33MHZ
MPC8360ERDK_66 powerpc mpc83xx mpc8360erdk freescale - MPC8360ERDK
@@ -578,15 +575,15 @@ MPC837XEMDS powerpc mpc83xx mpc837xemds freesca
MPC837XEMDS_HOST powerpc mpc83xx mpc837xemds freescale - MPC837XEMDS:PCI
MPC837XERDB powerpc mpc83xx mpc837xerdb freescale
kmeter1 powerpc mpc83xx km83xx keymile
+kmsupx5 powerpc mpc83xx km83xx keymile
+suvd3 powerpc mpc83xx km83xx keymile
+tuda1 powerpc mpc83xx km83xx keymile
+tuxa1 powerpc mpc83xx km83xx keymile
MERGERBOX powerpc mpc83xx mergerbox matrix_vision
MVBLM7 powerpc mpc83xx mvblm7 matrix_vision
SIMPC8313_LP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_LP
SIMPC8313_SP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_SP
-kmsupx5 powerpc mpc83xx km83xx keymile
-suvd3 powerpc mpc83xx km83xx keymile
TQM834x powerpc mpc83xx tqm834x tqc
-tuda1 powerpc mpc83xx km83xx keymile
-tuxa1 powerpc mpc83xx km83xx keymile
sbc8540 powerpc mpc85xx sbc8560 - - SBC8540
sbc8540_33 powerpc mpc85xx sbc8560 - - SBC8540
sbc8540_66 powerpc mpc85xx sbc8560 - - SBC8540
@@ -621,20 +618,20 @@ MPC8569MDS_NAND powerpc mpc85xx mpc8569mds freesca
MPC8572DS powerpc mpc85xx mpc8572ds freescale - MPC8572DS
MPC8572DS_36BIT powerpc mpc85xx mpc8572ds freescale - MPC8572DS:36BIT
MPC8572DS_NAND powerpc mpc85xx mpc8572ds freescale - MPC8572DS:NAND
-P1010RDB_NOR powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB
-P1010RDB_NOR_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,SECURE_BOOT
+P1010RDB_36BIT_NAND powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,NAND
+P1010RDB_36BIT_NAND_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,NAND_SECBOOT,SECURE_BOOT
P1010RDB_36BIT_NOR powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT
P1010RDB_36BIT_NOR_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SECURE_BOOT
+P1010RDB_36BIT_SDCARD powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SDCARD
+P1010RDB_36BIT_SPIFLASH powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SPIFLASH
+P1010RDB_36BIT_SPIFLASH_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SPIFLASH,SECURE_BOOT
P1010RDB_NAND powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,NAND
P1010RDB_NAND_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,NAND_SECBOOT,SECURE_BOOT
-P1010RDB_36BIT_NAND powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,NAND
-P1010RDB_36BIT_NAND_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,NAND_SECBOOT,SECURE_BOOT
+P1010RDB_NOR powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB
+P1010RDB_NOR_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,SECURE_BOOT
P1010RDB_SDCARD powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,SDCARD
P1010RDB_SPIFLASH powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,SPIFLASH
P1010RDB_SPIFLASH_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,SPIFLASH,SECURE_BOOT
-P1010RDB_36BIT_SDCARD powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SDCARD
-P1010RDB_36BIT_SPIFLASH powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SPIFLASH
-P1010RDB_36BIT_SPIFLASH_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,SPIFLASH,SECURE_BOOT
P1011RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB
P1011RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,36BIT
P1011RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,36BIT,SDCARD
@@ -644,35 +641,35 @@ P1011RDB_SDCARD powerpc mpc85xx p1_p2_rdb freesca
P1011RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,SPIFLASH
P1020MBG-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020MBG
P1020MBG-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020MBG,36BIT
-P1020MBG-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020MBG,SDCARD
P1020MBG-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020MBG,SDCARD,36BIT
+P1020MBG-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020MBG,SDCARD
P1020RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB
P1020RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT
P1020RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT,SDCARD
P1020RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT,SPIFLASH
P1020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,NAND
-P1020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SDCARD
-P1020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SPIFLASH
P1020RDB-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB
-P1020RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,NAND
-P1020RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,SDCARD
-P1020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,SPIFLASH
P1020RDB-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT
P1020RDB-PC_36BIT_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,NAND
P1020RDB-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,SDCARD
P1020RDB-PC_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,SPIFLASH
+P1020RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,NAND
+P1020RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,SDCARD
+P1020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,SPIFLASH
+P1020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SDCARD
+P1020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SPIFLASH
P1020UTM-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM
-P1020UTM-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,SDCARD
P1020UTM-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,36BIT
P1020UTM-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,36BIT,SDCARD
+P1020UTM-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,SDCARD
P1021RDB-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB
-P1021RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,NAND
-P1021RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,SDCARD
-P1021RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,SPIFLASH
P1021RDB-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,36BIT
P1021RDB-PC_36BIT_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,36BIT,NAND
P1021RDB-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,36BIT,SDCARD
P1021RDB-PC_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,36BIT,SPIFLASH
+P1021RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,NAND
+P1021RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,SDCARD
+P1021RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,SPIFLASH
P1022DS powerpc mpc85xx p1022ds freescale
P1022DS_36BIT powerpc mpc85xx p1022ds freescale - P1022DS:36BIT
P1023RDS powerpc mpc85xx p1023rds freescale - P1023RDS
@@ -694,6 +691,8 @@ P2010RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freesca
P2010RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,NAND
P2010RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,SDCARD
P2010RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,SPIFLASH
+P2020COME_SDCARD powerpc mpc85xx p2020come freescale - P2020COME:SDCARD
+P2020COME_SPIFLASH powerpc mpc85xx p2020come freescale - P2020COME:SPIFLASH
P2020DS powerpc mpc85xx p2020ds freescale
P2020DS_36BIT powerpc mpc85xx p2020ds freescale - P2020DS:36BIT
P2020DS_DDR2 powerpc mpc85xx p2020ds freescale - P2020DS:DDR2
@@ -704,18 +703,16 @@ P2020RDB_36BIT powerpc mpc85xx p1_p2_rdb freesca
P2020RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,36BIT,SDCARD
P2020RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,36BIT,SPIFLASH
P2020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,NAND
-P2020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SDCARD
-P2020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SPIFLASH
P2020RDB-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB
-P2020RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,NAND
-P2020RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,SDCARD
-P2020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,SPIFLASH
P2020RDB-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,36BIT
P2020RDB-PC_36BIT_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,36BIT,NAND
P2020RDB-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,36BIT,SDCARD
P2020RDB-PC_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,36BIT,SPIFLASH
-P2020COME_SDCARD powerpc mpc85xx p2020come freescale - P2020COME:SDCARD
-P2020COME_SPIFLASH powerpc mpc85xx p2020come freescale - P2020COME:SPIFLASH
+P2020RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,NAND
+P2020RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,SDCARD
+P2020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P2020RDB,SPIFLASH
+P2020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SDCARD
+P2020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SPIFLASH
P2041RDB powerpc mpc85xx p2041rdb freescale
P2041RDB_SDCARD powerpc mpc85xx p2041rdb freescale - P2041RDB:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
P2041RDB_SECURE_BOOT powerpc mpc85xx p2041rdb freescale - P2041RDB:SECURE_BOOT
@@ -973,6 +970,7 @@ xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
xilinx-ppc405-generic_flash powerpc ppc4xx ppc405-generic xilinx - xilinx-ppc405-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC
xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1
xilinx-ppc440-generic_flash powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC
+sandbox sandbox sandbox sandbox sandbox -
rsk7203 sh sh2 rsk7203 renesas -
rsk7264 sh sh2 rsk7264 renesas -
mpr2 sh sh3 mpr2 - -
@@ -982,18 +980,20 @@ espt sh sh4 espt -
ms7722se sh sh4 ms7722se - -
ms7750se sh sh4 ms7750se - -
ap325rxa sh sh4 ap325rxa renesas -
+ecovec sh sh4 ecovec renesas -
+MigoR sh sh4 MigoR renesas -
r2dplus sh sh4 r2dplus renesas -
r7780mp sh sh4 r7780mp renesas -
sh7757lcr sh sh4 sh7757lcr renesas -
sh7763rdp sh sh4 sh7763rdp renesas -
sh7785lcr sh sh4 sh7785lcr renesas -
sh7785lcr_32bit sh sh4 sh7785lcr renesas - sh7785lcr:SH_32BIT=1
-MigoR sh sh4 MigoR renesas -
-ecovec sh sh4 ecovec renesas -
grsim_leon2 sparc leon2 - gaisler
gr_cpci_ax2000 sparc leon3 - gaisler
gr_ep2s60 sparc leon3 - gaisler
grsim sparc leon3 - gaisler
gr_xc3s_1500 sparc leon3 - gaisler
+eNET x86 x86 eNET - sc520 eNET:SYS_TEXT_BASE=0x38040000
+eNET_SRAM x86 x86 eNET - sc520 eNET:SYS_TEXT_BASE=0x19000000
# Target ARCH CPU Board name Vendor SoC Options
########################################################################################################################
--
1.7.6.4
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 06/13] board/apollon/apollon.c: Fix GCc 4.6 build warnings.
2011-12-09 11:14 [U-Boot] [PATCH 00/13] ARM: more cleanups Wolfgang Denk
` (4 preceding siblings ...)
2011-12-09 11:14 ` [U-Boot] [PATCH 05/13] boards.cfg: sort list Wolfgang Denk
@ 2011-12-09 11:14 ` Wolfgang Denk
2011-12-10 22:09 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 07/13] board/apollon/sys_info.c: Fix GCC 4.6 build warning Wolfgang Denk
` (6 subsequent siblings)
12 siblings, 1 reply; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-09 11:14 UTC (permalink / raw)
To: u-boot
Fix:
apollon.c: In function 'dram_init':
apollon.c:188:29: warning: variable 'cpu' set but not used
[-Wunused-but-set-variable]
apollon.c:188:20: warning: variable 'rev' set but not used
[-Wunused-but-set-variable]
apollon.c:187:26: warning: variable 'size1' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
---
board/apollon/apollon.c | 18 +++++++++---------
1 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/board/apollon/apollon.c b/board/apollon/apollon.c
index 4768f58..76626f0 100644
--- a/board/apollon/apollon.c
+++ b/board/apollon/apollon.c
@@ -184,14 +184,12 @@ eth_reset_err_out:
**********************************************/
int dram_init(void)
{
- unsigned int size0 = 0, size1 = 0;
- u32 mtype, btype, rev = 0, cpu = 0;
+ unsigned int size;
+ u32 mtype, btype;
#define NOT_EARLY 0
btype = get_board_type();
mtype = get_mem_type();
- rev = get_cpu_rev();
- cpu = get_cpu_type();
display_board_info(btype);
@@ -200,14 +198,16 @@ int dram_init(void)
do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);
}
- size0 = get_sdr_cs_size(SDRC_CS0_OSET);
- size1 = get_sdr_cs_size(SDRC_CS1_OSET);
+ size = get_sdr_cs_size(SDRC_CS0_OSET);
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = size0;
+ gd->bd->bi_dram[0].size = size;
#if CONFIG_NR_DRAM_BANKS > 1
- gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + size0;
- gd->bd->bi_dram[1].size = size1;
+ size = get_sdr_cs_size(SDRC_CS1_OSET);
+
+ gd->bd->bi_dram[1].start = gd->bd->bi_dram[0].start +
+ gd->bd->bi_dram[0].size;
+ gd->bd->bi_dram[1].size = size;
#endif
return 0;
--
1.7.6.4
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 07/13] board/apollon/sys_info.c: Fix GCC 4.6 build warning
2011-12-09 11:14 [U-Boot] [PATCH 00/13] ARM: more cleanups Wolfgang Denk
` (5 preceding siblings ...)
2011-12-09 11:14 ` [U-Boot] [PATCH 06/13] board/apollon/apollon.c: Fix GCc 4.6 build warnings Wolfgang Denk
@ 2011-12-09 11:14 ` Wolfgang Denk
2011-12-10 22:10 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 08/13] ARM: convert "apollon" board to use boards.cfg Wolfgang Denk
` (5 subsequent siblings)
12 siblings, 1 reply; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-09 11:14 UTC (permalink / raw)
To: u-boot
Fix:
sys_info.c: In function 'display_board_info':
sys_info.c:260:16: warning: variable 'db_s' set but not used
[-Wunused-but-set-variable]
Also fix resulting warnings:
sys_info.c:251:7: warning: unused variable 'db_ip' [-Wunused-variable]
sys_info.c:250:7: warning: unused variable 'db_men' [-Wunused-variable]
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
---
board/apollon/sys_info.c | 9 +--------
1 files changed, 1 insertions(+), 8 deletions(-)
diff --git a/board/apollon/sys_info.c b/board/apollon/sys_info.c
index 26ac9a2..4f950ae 100644
--- a/board/apollon/sys_info.c
+++ b/board/apollon/sys_info.c
@@ -247,8 +247,6 @@ void display_board_info(u32 btype)
char cpu_2420[] = "2420"; /* cpu type */
char cpu_2422[] = "2422";
char cpu_2423[] = "2423";
- char db_men[] = "Menelaus"; /* board type */
- char db_ip[] = "IP";
char mem_sdr[] = "mSDR"; /* memory type */
char mem_ddr[] = "mDDR";
char t_tst[] = "TST"; /* security level */
@@ -257,7 +255,7 @@ void display_board_info(u32 btype)
char t_gp[] = "GP";
char unk[] = "?";
- char *cpu_s, *db_s, *mem_s, *sec_s;
+ char *cpu_s, *mem_s, *sec_s;
u32 cpu, rev, sec;
rev = get_cpu_rev();
@@ -276,11 +274,6 @@ void display_board_info(u32 btype)
else
cpu_s = cpu_2420;
- if (btype == BOARD_H4_MENELAUS)
- db_s = db_men;
- else
- db_s = db_ip;
-
switch (sec) {
case TST_DEVICE:
sec_s = t_tst;
--
1.7.6.4
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 08/13] ARM: convert "apollon" board to use boards.cfg
2011-12-09 11:14 [U-Boot] [PATCH 00/13] ARM: more cleanups Wolfgang Denk
` (6 preceding siblings ...)
2011-12-09 11:14 ` [U-Boot] [PATCH 07/13] board/apollon/sys_info.c: Fix GCC 4.6 build warning Wolfgang Denk
@ 2011-12-09 11:14 ` Wolfgang Denk
2011-12-10 22:10 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 09/13] board/LaCie/edminiv2/edminiv2.c: Fix build warning Wolfgang Denk
` (4 subsequent siblings)
12 siblings, 1 reply; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-09 11:14 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
---
MAKEALL | 1 -
Makefile | 10 ----------
boards.cfg | 1 +
include/configs/apollon.h | 2 ++
4 files changed, 3 insertions(+), 11 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index 21b573a..0f7b820 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -317,7 +317,6 @@ LIST_ARM9="$(boards_by_cpu arm920t) \
## ARM11 Systems
#########################################################################
LIST_ARM11="$(boards_by_cpu arm1136) \
- apollon \
imx31_phycore \
imx31_phycore_eet \
mx31pdk \
diff --git a/Makefile b/Makefile
index de65a17..e603b9a 100644
--- a/Makefile
+++ b/Makefile
@@ -708,16 +708,6 @@ scpu_config: unconfig
@$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive
#########################################################################
-## ARM1136 Systems
-#########################################################################
-
-apollon_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
- @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
- @$(MKCONFIG) $@ arm arm1136 apollon - omap24xx
-
-#########################################################################
## ARM1176 Systems
#########################################################################
smdk6400_noUSB_config \
diff --git a/boards.cfg b/boards.cfg
index 4a4968d..c1b0bad 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -45,6 +45,7 @@ tt01 arm arm1136 - hale
imx31_litekit arm arm1136 - logicpd mx31
flea3 arm arm1136 - CarMediaLab mx35
mx35pdk arm arm1136 - freescale mx35
+apollon arm arm1136 apollon - omap24xx
omap2420h4 arm arm1136 - ti omap24xx
tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
integratorap_cm720t arm arm720t integrator armltd - integratorap:CM720T
diff --git a/include/configs/apollon.h b/include/configs/apollon.h
index 7fcf437..8f06cd7 100644
--- a/include/configs/apollon.h
+++ b/include/configs/apollon.h
@@ -37,6 +37,8 @@
#define CONFIG_APOLLON 1
#define CONFIG_APOLLON_PLUS 1 /* If you have apollon plus 1.x */
+#define CONFIG_ONENAND_U_BOOT y
+
/* Clock config to target*/
#define PRCM_CONFIG_I 1
/* #define PRCM_CONFIG_II 1 */
--
1.7.6.4
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 09/13] board/LaCie/edminiv2/edminiv2.c: Fix build warning
2011-12-09 11:14 [U-Boot] [PATCH 00/13] ARM: more cleanups Wolfgang Denk
` (7 preceding siblings ...)
2011-12-09 11:14 ` [U-Boot] [PATCH 08/13] ARM: convert "apollon" board to use boards.cfg Wolfgang Denk
@ 2011-12-09 11:14 ` Wolfgang Denk
2011-12-09 15:11 ` Simon Guinot
2011-12-10 22:11 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 10/13] board/ti/omap1610inn/flash.c: Fix GCC 4.6 build warnings Wolfgang Denk
` (3 subsequent siblings)
12 siblings, 2 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-09 11:14 UTC (permalink / raw)
To: u-boot
Fix:
edminiv2.c: In function 'reset_phy':
edminiv2.c:98:2: warning: implicit declaration of function
'mv_phy_88e1116_init' [-Wimplicit-function-declaration]
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
---
board/LaCie/edminiv2/edminiv2.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c
index c1a01bc..1b33875 100644
--- a/board/LaCie/edminiv2/edminiv2.c
+++ b/board/LaCie/edminiv2/edminiv2.c
@@ -27,6 +27,7 @@
#include <common.h>
#include <miiphy.h>
#include <asm/arch/orion5x.h>
+#include "../common/common.h"
DECLARE_GLOBAL_DATA_PTR;
--
1.7.6.4
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 10/13] board/ti/omap1610inn/flash.c: Fix GCC 4.6 build warnings
2011-12-09 11:14 [U-Boot] [PATCH 00/13] ARM: more cleanups Wolfgang Denk
` (8 preceding siblings ...)
2011-12-09 11:14 ` [U-Boot] [PATCH 09/13] board/LaCie/edminiv2/edminiv2.c: Fix build warning Wolfgang Denk
@ 2011-12-09 11:14 ` Wolfgang Denk
2011-12-09 14:57 ` Tom Rini
2011-12-10 22:11 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 11/13] ARM: convert "omap16xx" boards to boards.cfg Wolfgang Denk
` (2 subsequent siblings)
12 siblings, 2 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-09 11:14 UTC (permalink / raw)
To: u-boot
Fix:
flash.c: In function 'flash_get_offsets':
flash.c:139:10: warning: variable 'pOrgDef' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'flash_erase':
flash.c:280:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'write_data':
flash.c:456:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
board/ti/omap1610inn/flash.c | 21 +++++++++++++--------
1 files changed, 13 insertions(+), 8 deletions(-)
diff --git a/board/ti/omap1610inn/flash.c b/board/ti/omap1610inn/flash.c
index 1b67d08..a99a91c 100644
--- a/board/ti/omap1610inn/flash.c
+++ b/board/ti/omap1610inn/flash.c
@@ -136,9 +136,7 @@ void flash_unlock(flash_info_t * info)
static void flash_get_offsets (ulong base, flash_info_t * info)
{
int i;
- OrgDef *pOrgDef;
- pOrgDef = OrgIntel_28F256L18T;
if (info->flash_id == FLASH_UNKNOWN) {
return;
}
@@ -352,6 +350,9 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
printf (" done\n");
}
}
+ if (flag)
+ enable_interrupts();
+
return rcode;
}
@@ -453,13 +454,13 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
{
FPWV *addr = (FPWV *) dest;
ulong status;
- int flag;
+ int flag, rc = 0;
ulong start;
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
- printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
- return (2);
+ printf("not erased at %08lx (%x)\n", (ulong) addr, *addr);
+ return 2;
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
@@ -472,12 +473,16 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
/* wait while polling the status register */
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (1);
+ rc = 1;
+ goto done;
}
}
+done:
+ if (flag)
+ enable_interrupts();
+
*addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (0);
+ return rc;
}
void inline spin_wheel (void)
--
1.7.6.4
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 11/13] ARM: convert "omap16xx" boards to boards.cfg
2011-12-09 11:14 [U-Boot] [PATCH 00/13] ARM: more cleanups Wolfgang Denk
` (9 preceding siblings ...)
2011-12-09 11:14 ` [U-Boot] [PATCH 10/13] board/ti/omap1610inn/flash.c: Fix GCC 4.6 build warnings Wolfgang Denk
@ 2011-12-09 11:14 ` Wolfgang Denk
2011-12-09 14:56 ` Tom Rini
2011-12-10 22:12 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 12/13] board/ti/omap730p2/flash.c: Fix GCC 4.6 build warnings Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 13/13] ARM: convert "omap730p2" boards to boards.cfg Wolfgang Denk
12 siblings, 2 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-09 11:14 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kshitij Gupta <kshitij@ti.com>
---
MAKEALL | 2 --
Makefile | 20 --------------------
boards.cfg | 8 ++++++++
3 files changed, 8 insertions(+), 22 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index 0f7b820..c2b52d0 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -308,8 +308,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
LIST_ARM9="$(boards_by_cpu arm920t) \
$(boards_by_cpu arm926ejs) \
$(boards_by_cpu arm925t) \
- omap1610h2 \
- omap1610inn \
omap730p2 \
"
diff --git a/Makefile b/Makefile
index e603b9a..8474ce7 100644
--- a/Makefile
+++ b/Makefile
@@ -646,26 +646,6 @@ ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
# ARM
#========================================================================
-xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
-
-omap1610inn_config \
-omap1610inn_cs0boot_config \
-omap1610inn_cs3boot_config \
-omap1610inn_cs_autoboot_config \
-omap1610h2_config \
-omap1610h2_cs0boot_config \
-omap1610h2_cs3boot_config \
-omap1610h2_cs_autoboot_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _cs0boot_, $@)" ] ; then \
- echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
- elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
- echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
- else \
- echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
-
omap730p2_config \
omap730p2_cs0boot_config \
omap730p2_cs3boot_config : unconfig
diff --git a/boards.cfg b/boards.cfg
index c1b0bad..b9cc705 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -162,6 +162,14 @@ magnesium arm arm926ejs imx27lite logicpd
m28evk arm arm926ejs - denx mx28
nhk8815 arm arm926ejs nhk8815 st nomadik
nhk8815_onenand arm arm926ejs nhk8815 st nomadik nhk8815:BOOT_ONENAND
+omap1610h2 arm arm926ejs omap1610inn ti omap omap1610inn:CS3_BOOT
+omap1610h2_cs0boot arm arm926ejs omap1610inn ti omap omap1610inn:CS0_BOOT
+omap1610h2_cs3boot arm arm926ejs omap1610inn ti omap omap1610inn:CS3_BOOT
+omap1610h2_cs_autoboot arm arm926ejs omap1610inn ti omap omap1610inn:CS_AUTOBOOT
+omap1610inn arm arm926ejs omap1610inn ti omap omap1610inn:CS3_BOOT
+omap1610inn_cs0boot arm arm926ejs omap1610inn ti omap omap1610inn:CS0_BOOT
+omap1610inn_cs3boot arm arm926ejs omap1610inn ti omap omap1610inn:CS3_BOOT
+omap1610inn_cs_autoboot arm arm926ejs omap1610inn ti omap omap1610inn:CS_AUTOBOOT
omap5912osk arm arm926ejs - ti omap
edminiv2 arm arm926ejs - LaCie orion5x
dkb arm arm926ejs - Marvell pantheon
--
1.7.6.4
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 12/13] board/ti/omap730p2/flash.c: Fix GCC 4.6 build warnings
2011-12-09 11:14 [U-Boot] [PATCH 00/13] ARM: more cleanups Wolfgang Denk
` (10 preceding siblings ...)
2011-12-09 11:14 ` [U-Boot] [PATCH 11/13] ARM: convert "omap16xx" boards to boards.cfg Wolfgang Denk
@ 2011-12-09 11:14 ` Wolfgang Denk
2011-12-09 14:58 ` Tom Rini
2011-12-10 22:12 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 13/13] ARM: convert "omap730p2" boards to boards.cfg Wolfgang Denk
12 siblings, 2 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-09 11:14 UTC (permalink / raw)
To: u-boot
Fix:
flash.c: In function 'flash_get_offsets':
flash.c:122:10: warning: variable 'pOrgDef' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'flash_erase':
flash.c:263:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'write_data':
flash.c:439:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Dave Peverley <dpeverley@mpc-data.co.uk>
---
board/ti/omap730p2/flash.c | 19 ++++++++++++-------
1 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/board/ti/omap730p2/flash.c b/board/ti/omap730p2/flash.c
index 185bc2d..a292627 100644
--- a/board/ti/omap730p2/flash.c
+++ b/board/ti/omap730p2/flash.c
@@ -119,9 +119,7 @@ unsigned long flash_init (void)
static void flash_get_offsets (ulong base, flash_info_t * info)
{
int i;
- OrgDef *pOrgDef;
- pOrgDef = OrgIntel_28F256L18T;
if (info->flash_id == FLASH_UNKNOWN) {
return;
}
@@ -335,6 +333,10 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
printf (" done\n");
}
}
+
+ if (flag)
+ enable_interrupts();
+
return rcode;
}
@@ -436,7 +438,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
{
FPWV *addr = (FPWV *) dest;
ulong status;
- int flag;
+ int flag, rc = 0;
ulong start;
/* Check if Flash is (sufficiently) erased */
@@ -456,12 +458,15 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
/* wait while polling the status register */
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (1);
+ rc = 1;
+ goto done;
}
}
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (0);
+done:
+ *addr = (FPW)0x00FF00FF; /* restore read mode */
+ if (flag)
+ enable_interrupts();
+ return rc;
}
void inline spin_wheel (void)
--
1.7.6.4
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 13/13] ARM: convert "omap730p2" boards to boards.cfg
2011-12-09 11:14 [U-Boot] [PATCH 00/13] ARM: more cleanups Wolfgang Denk
` (11 preceding siblings ...)
2011-12-09 11:14 ` [U-Boot] [PATCH 12/13] board/ti/omap730p2/flash.c: Fix GCC 4.6 build warnings Wolfgang Denk
@ 2011-12-09 11:14 ` Wolfgang Denk
2011-12-09 14:55 ` Tom Rini
2011-12-10 22:13 ` Wolfgang Denk
12 siblings, 2 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-09 11:14 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Dave Peverley <dpeverley@mpc-data.co.uk>
---
MAKEALL | 1 -
Makefile | 11 -----------
boards.cfg | 3 +++
3 files changed, 3 insertions(+), 12 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index c2b52d0..f735af6 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -308,7 +308,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
LIST_ARM9="$(boards_by_cpu arm920t) \
$(boards_by_cpu arm926ejs) \
$(boards_by_cpu arm925t) \
- omap730p2 \
"
#########################################################################
diff --git a/Makefile b/Makefile
index 8474ce7..c37dc03 100644
--- a/Makefile
+++ b/Makefile
@@ -646,17 +646,6 @@ ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
# ARM
#========================================================================
-omap730p2_config \
-omap730p2_cs0boot_config \
-omap730p2_cs3boot_config : unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _cs0boot_, $@)" ] ; then \
- echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
- else \
- echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap
-
spear300_config \
spear310_config \
spear320_config : unconfig
diff --git a/boards.cfg b/boards.cfg
index b9cc705..9f25649 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -171,6 +171,9 @@ omap1610inn_cs0boot arm arm926ejs omap1610inn ti omap omap1610inn:
omap1610inn_cs3boot arm arm926ejs omap1610inn ti omap omap1610inn:CS3_BOOT
omap1610inn_cs_autoboot arm arm926ejs omap1610inn ti omap omap1610inn:CS_AUTOBOOT
omap5912osk arm arm926ejs - ti omap
+omap730p2 arm arm926ejs omap730p2 ti omap omap730p2:CS3_BOOT
+omap730p2_cs0boot arm arm926ejs omap730p2 ti omap omap730p2:CS0_BOOT
+omap730p2_cs3boot arm arm926ejs omap730p2 ti omap omap730p2:CS3_BOOT
edminiv2 arm arm926ejs - LaCie orion5x
dkb arm arm926ejs - Marvell pantheon
versatileab arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_AB
--
1.7.6.4
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 03/13] fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile warning (and bug)
2011-12-09 11:14 ` [U-Boot] [PATCH 03/13] fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile warning (and bug) Wolfgang Denk
@ 2011-12-09 11:36 ` William Juul
2011-12-10 22:08 ` Wolfgang Denk
1 sibling, 0 replies; 36+ messages in thread
From: William Juul @ 2011-12-09 11:36 UTC (permalink / raw)
To: u-boot
Acked-by: William Juul <wiljuul@cisco.com>
And please note my new e-mail address.
Best regards
William Juul
> -----Original Message-----
> From: Wolfgang Denk [mailto:wd at denx.de]
> Sent: Friday, December 09, 2011 12:14 PM
> To: u-boot at lists.denx.de
> Cc: Wolfgang Denk; William Juul; Scott Wood
> Subject: [PATCH 03/13] fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile
> warning (and bug)
>
> Fix:
> yaffs_guts.c: In function 'yaffs_GarbageCollectBlock':
> yaffs_guts.c:2761:6: warning: variable 'retVal' set but not used
> [-Wunused-but-set-variable]
>
> Here GCC actually detected a bug. The code was always returning OK
> instead of the previously set retrun code. Fix that.
>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: William Juul <william.juul@tandberg.com>
> Cc: Scott Wood <scottwood@freescale.com>
> ---
> fs/yaffs2/yaffs_guts.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/fs/yaffs2/yaffs_guts.c b/fs/yaffs2/yaffs_guts.c
> index f0ef8db..7390b40 100644
> --- a/fs/yaffs2/yaffs_guts.c
> +++ b/fs/yaffs2/yaffs_guts.c
> @@ -2976,7 +2976,7 @@ static int
yaffs_GarbageCollectBlock(yaffs_Device
> * dev, int block)
>
> dev->isDoingGC = 0;
>
> - return YAFFS_OK;
> + return retVal;
> }
>
> /* New garbage collector
> --
> 1.7.6.4
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 04/13] common/cmd_pxe.c: Fix compile warning
2011-12-09 11:14 ` [U-Boot] [PATCH 04/13] common/cmd_pxe.c: Fix compile warning Wolfgang Denk
@ 2011-12-09 13:48 ` Jason Hobbs
2011-12-09 20:45 ` Wolfgang Denk
0 siblings, 1 reply; 36+ messages in thread
From: Jason Hobbs @ 2011-12-09 13:48 UTC (permalink / raw)
To: u-boot
Dear Wolfgang,
On Fri, Dec 09, 2011 at 06:14:23AM -0500, Wolfgang Denk wrote:
> Fix:
> cmd_pxe.c: In function 'parse_pxefile_top':
> cmd_pxe.c:941:5: warning: 'err' may be used uninitialized in this
> function [-Wuninitialized]
> cmd_pxe.c:921:6: note: 'err' was declared here
>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Jason Hobbs <jason.hobbs@calxeda.com>
> ---
> common/cmd_pxe.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/common/cmd_pxe.c b/common/cmd_pxe.c
> index 9426f5b..eaf95bf 100644
> --- a/common/cmd_pxe.c
> +++ b/common/cmd_pxe.c
> @@ -936,6 +936,7 @@ static int parse_menu(char **c, struct pxe_menu *cfg, char *b, int nest_level)
> default:
> printf("Ignoring malformed menu command: %.*s\n",
> (int)(*c - s), s);
> + err = -1;
err should either be set to 0 here, or initialized to 0 at the top of
the function. Setting it to -1 will cause the parser to give up rather
than just printing out the warning message. It doesn't have to give up,
and not giving up makes the parser more accommodating of pxelinux
commands that aren't supported in U-Boot.
Thanks,
Jason
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 13/13] ARM: convert "omap730p2" boards to boards.cfg
2011-12-09 11:14 ` [U-Boot] [PATCH 13/13] ARM: convert "omap730p2" boards to boards.cfg Wolfgang Denk
@ 2011-12-09 14:55 ` Tom Rini
2011-12-10 22:13 ` Wolfgang Denk
1 sibling, 0 replies; 36+ messages in thread
From: Tom Rini @ 2011-12-09 14:55 UTC (permalink / raw)
To: u-boot
On Fri, Dec 9, 2011 at 4:14 AM, Wolfgang Denk <wd@denx.de> wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Dave Peverley <dpeverley@mpc-data.co.uk>
Acked-by: Tom Rini <trini@ti.com>
> ---
> ?MAKEALL ? ?| ? ?1 -
> ?Makefile ? | ? 11 -----------
> ?boards.cfg | ? ?3 +++
> ?3 files changed, 3 insertions(+), 12 deletions(-)
>
> diff --git a/MAKEALL b/MAKEALL
> index c2b52d0..f735af6 100755
> --- a/MAKEALL
> +++ b/MAKEALL
> @@ -308,7 +308,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
> ?LIST_ARM9="$(boards_by_cpu arm920t) ? ?\
> ? ? ? ?$(boards_by_cpu arm926ejs) ? ? ?\
> ? ? ? ?$(boards_by_cpu arm925t) ? ? ? ?\
> - ? ? ? omap730p2 ? ? ? ? ? ? ? \
> ?"
>
> ?#########################################################################
> diff --git a/Makefile b/Makefile
> index 8474ce7..c37dc03 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -646,17 +646,6 @@ ucname ? ? = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
> ?# ARM
> ?#========================================================================
>
> -omap730p2_config \
> -omap730p2_cs0boot_config \
> -omap730p2_cs3boot_config : ? ? unconfig
> - ? ? ? @mkdir -p $(obj)include
> - ? ? ? @if [ "$(findstring _cs0boot_, $@)" ] ; then \
> - ? ? ? ? ? ? ? echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
> - ? ? ? else \
> - ? ? ? ? ? ? ? echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
> - ? ? ? fi;
> - ? ? ? @$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap
> -
> ?spear300_config \
> ?spear310_config \
> ?spear320_config : ? ? ?unconfig
> diff --git a/boards.cfg b/boards.cfg
> index b9cc705..9f25649 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -171,6 +171,9 @@ omap1610inn_cs0boot ? ? ?arm ? ? ? ? arm926ejs ? omap1610inn ? ? ? ? ti ? ? ? ? ? ? omap ? ? ? ?omap1610inn:
> ?omap1610inn_cs3boot ? ? ? ? arm ? ? ? ? arm926ejs ? omap1610inn ? ? ? ? ti ? ? ? ? ? ? omap ? ? ? ?omap1610inn:CS3_BOOT
> ?omap1610inn_cs_autoboot ? ? ? ? ? ? arm ? ? ? ? arm926ejs ? omap1610inn ? ? ? ? ti ? ? ? ? ? ? omap ? ? ? ?omap1610inn:CS_AUTOBOOT
> ?omap5912osk ? ? ? ? ? ? ? ? ?arm ? ? ? ? arm926ejs ? - ? ? ? ? ? ? ? ? ? ti ? ? ? ? ? ? omap
> +omap730p2 ? ? ? ? ? ? ? ? ? arm ? ? ? ? arm926ejs ? omap730p2 ? ? ? ? ? ti ? ? ? ? ? ? omap ? ? ? ?omap730p2:CS3_BOOT
> +omap730p2_cs0boot ? ? ? ? ? arm ? ? ? ? arm926ejs ? omap730p2 ? ? ? ? ? ti ? ? ? ? ? ? omap ? ? ? ?omap730p2:CS0_BOOT
> +omap730p2_cs3boot ? ? ? ? ? arm ? ? ? ? arm926ejs ? omap730p2 ? ? ? ? ? ti ? ? ? ? ? ? omap ? ? ? ?omap730p2:CS3_BOOT
> ?edminiv2 ? ? ? ? ? ? ? ? ? ? arm ? ? ? ? arm926ejs ? - ? ? ? ? ? ? ? ? ? LaCie ? ? ? ? ?orion5x
> ?dkb ? ? ? ? ? ? ? ? ? ? ? ? arm ? ? ? ? arm926ejs ? - ? ? ? ? ? ? ? ? ? Marvell ? ? ? ?pantheon
> ?versatileab ? ? ? ? ? ? ? ? ?arm ? ? ? ? arm926ejs ? versatile ? ? ? ? ? armltd ? ? ? ? versatile ? versatile:ARCH_VERSATILE_AB
> --
> 1.7.6.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
Tom
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 11/13] ARM: convert "omap16xx" boards to boards.cfg
2011-12-09 11:14 ` [U-Boot] [PATCH 11/13] ARM: convert "omap16xx" boards to boards.cfg Wolfgang Denk
@ 2011-12-09 14:56 ` Tom Rini
2011-12-10 22:12 ` Wolfgang Denk
1 sibling, 0 replies; 36+ messages in thread
From: Tom Rini @ 2011-12-09 14:56 UTC (permalink / raw)
To: u-boot
On Fri, Dec 9, 2011 at 4:14 AM, Wolfgang Denk <wd@denx.de> wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Kshitij Gupta <kshitij@ti.com>
Acked-by: Tom Rini <trini@ti.com>
> ---
> ?MAKEALL ? ?| ? ?2 --
> ?Makefile ? | ? 20 --------------------
> ?boards.cfg | ? ?8 ++++++++
> ?3 files changed, 8 insertions(+), 22 deletions(-)
>
> diff --git a/MAKEALL b/MAKEALL
> index 0f7b820..c2b52d0 100755
> --- a/MAKEALL
> +++ b/MAKEALL
> @@ -308,8 +308,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
> ?LIST_ARM9="$(boards_by_cpu arm920t) ? ?\
> ? ? ? ?$(boards_by_cpu arm926ejs) ? ? ?\
> ? ? ? ?$(boards_by_cpu arm925t) ? ? ? ?\
> - ? ? ? omap1610h2 ? ? ? ? ? ? ?\
> - ? ? ? omap1610inn ? ? ? ? ? ? \
> ? ? ? ?omap730p2 ? ? ? ? ? ? ? \
> ?"
>
> diff --git a/Makefile b/Makefile
> index e603b9a..8474ce7 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -646,26 +646,6 @@ ucname ? ? = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
> ?# ARM
> ?#========================================================================
>
> -xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
> -
> -omap1610inn_config \
> -omap1610inn_cs0boot_config \
> -omap1610inn_cs3boot_config \
> -omap1610inn_cs_autoboot_config \
> -omap1610h2_config \
> -omap1610h2_cs0boot_config \
> -omap1610h2_cs3boot_config \
> -omap1610h2_cs_autoboot_config: unconfig
> - ? ? ? @mkdir -p $(obj)include
> - ? ? ? @if [ "$(findstring _cs0boot_, $@)" ] ; then \
> - ? ? ? ? ? ? ? echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
> - ? ? ? elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
> - ? ? ? ? ? ? ? echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
> - ? ? ? else \
> - ? ? ? ? ? ? ? echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
> - ? ? ? fi;
> - ? ? ? @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
> -
> ?omap730p2_config \
> ?omap730p2_cs0boot_config \
> ?omap730p2_cs3boot_config : ? ? unconfig
> diff --git a/boards.cfg b/boards.cfg
> index c1b0bad..b9cc705 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -162,6 +162,14 @@ magnesium ? ? ? ? ? ? ? ? ? ?arm ? ? ? ? arm926ejs ? imx27lite ? ? ? ? ? logicpd
> ?m28evk ? ? ? ? ? ? ? ? ? ? ? arm ? ? ? ? arm926ejs ? - ? ? ? ? ? ? ? ? ? denx ? ? ? ? ? mx28
> ?nhk8815 ? ? ? ? ? ? ? ? ? ? ?arm ? ? ? ? arm926ejs ? nhk8815 ? ? ? ? ? ? st ? ? ? ? ? ? nomadik
> ?nhk8815_onenand ? ? ? ? ? ? ?arm ? ? ? ? arm926ejs ? nhk8815 ? ? ? ? ? ? st ? ? ? ? ? ? nomadik ? ? ? nhk8815:BOOT_ONENAND
> +omap1610h2 ? ? ? ? ? ? ? ? ?arm ? ? ? ? arm926ejs ? omap1610inn ? ? ? ? ti ? ? ? ? ? ? omap ? ? ? ?omap1610inn:CS3_BOOT
> +omap1610h2_cs0boot ? ? ? ? ?arm ? ? ? ? arm926ejs ? omap1610inn ? ? ? ? ti ? ? ? ? ? ? omap ? ? ? ?omap1610inn:CS0_BOOT
> +omap1610h2_cs3boot ? ? ? ? ?arm ? ? ? ? arm926ejs ? omap1610inn ? ? ? ? ti ? ? ? ? ? ? omap ? ? ? ?omap1610inn:CS3_BOOT
> +omap1610h2_cs_autoboot ? ? ?arm ? ? ? ? arm926ejs ? omap1610inn ? ? ? ? ti ? ? ? ? ? ? omap ? ? ? ?omap1610inn:CS_AUTOBOOT
> +omap1610inn ? ? ? ? ? ? ? ? arm ? ? ? ? arm926ejs ? omap1610inn ? ? ? ? ti ? ? ? ? ? ? omap ? ? ? ?omap1610inn:CS3_BOOT
> +omap1610inn_cs0boot ? ? ? ? arm ? ? ? ? arm926ejs ? omap1610inn ? ? ? ? ti ? ? ? ? ? ? omap ? ? ? ?omap1610inn:CS0_BOOT
> +omap1610inn_cs3boot ? ? ? ? arm ? ? ? ? arm926ejs ? omap1610inn ? ? ? ? ti ? ? ? ? ? ? omap ? ? ? ?omap1610inn:CS3_BOOT
> +omap1610inn_cs_autoboot ? ? ? ? ? ? arm ? ? ? ? arm926ejs ? omap1610inn ? ? ? ? ti ? ? ? ? ? ? omap ? ? ? ?omap1610inn:CS_AUTOBOOT
> ?omap5912osk ? ? ? ? ? ? ? ? ?arm ? ? ? ? arm926ejs ? - ? ? ? ? ? ? ? ? ? ti ? ? ? ? ? ? omap
> ?edminiv2 ? ? ? ? ? ? ? ? ? ? arm ? ? ? ? arm926ejs ? - ? ? ? ? ? ? ? ? ? LaCie ? ? ? ? ?orion5x
> ?dkb ? ? ? ? ? ? ? ? ? ? ? ? arm ? ? ? ? arm926ejs ? - ? ? ? ? ? ? ? ? ? Marvell ? ? ? ?pantheon
> --
> 1.7.6.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
Tom
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 10/13] board/ti/omap1610inn/flash.c: Fix GCC 4.6 build warnings
2011-12-09 11:14 ` [U-Boot] [PATCH 10/13] board/ti/omap1610inn/flash.c: Fix GCC 4.6 build warnings Wolfgang Denk
@ 2011-12-09 14:57 ` Tom Rini
2011-12-10 22:11 ` Wolfgang Denk
1 sibling, 0 replies; 36+ messages in thread
From: Tom Rini @ 2011-12-09 14:57 UTC (permalink / raw)
To: u-boot
On Fri, Dec 9, 2011 at 4:14 AM, Wolfgang Denk <wd@denx.de> wrote:
> Fix:
> flash.c: In function 'flash_get_offsets':
> flash.c:139:10: warning: variable 'pOrgDef' set but not used
> [-Wunused-but-set-variable]
> flash.c: In function 'flash_erase':
> flash.c:280:6: warning: variable 'flag' set but not used
> [-Wunused-but-set-variable]
> flash.c: In function 'write_data':
> flash.c:456:6: warning: variable 'flag' set but not used
> [-Wunused-but-set-variable]
>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Tom Rini <trini@ti.com>
> ---
> ?board/ti/omap1610inn/flash.c | ? 21 +++++++++++++--------
> ?1 files changed, 13 insertions(+), 8 deletions(-)
>
> diff --git a/board/ti/omap1610inn/flash.c b/board/ti/omap1610inn/flash.c
> index 1b67d08..a99a91c 100644
> --- a/board/ti/omap1610inn/flash.c
> +++ b/board/ti/omap1610inn/flash.c
> @@ -136,9 +136,7 @@ void flash_unlock(flash_info_t * info)
> ?static void flash_get_offsets (ulong base, flash_info_t * info)
> ?{
> ? ? ? ?int i;
> - ? ? ? OrgDef *pOrgDef;
>
> - ? ? ? pOrgDef = OrgIntel_28F256L18T;
> ? ? ? ?if (info->flash_id == FLASH_UNKNOWN) {
> ? ? ? ? ? ? ? ?return;
> ? ? ? ?}
> @@ -352,6 +350,9 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
> ? ? ? ? ? ? ? ? ? ? ? ?printf (" done\n");
> ? ? ? ? ? ? ? ?}
> ? ? ? ?}
> + ? ? ? if (flag)
> + ? ? ? ? ? ? ? enable_interrupts();
> +
> ? ? ? ?return rcode;
> ?}
>
> @@ -453,13 +454,13 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
> ?{
> ? ? ? ?FPWV *addr = (FPWV *) dest;
> ? ? ? ?ulong status;
> - ? ? ? int flag;
> + ? ? ? int flag, rc = 0;
> ? ? ? ?ulong start;
>
> ? ? ? ?/* Check if Flash is (sufficiently) erased */
> ? ? ? ?if ((*addr & data) != data) {
> - ? ? ? ? ? ? ? printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
> - ? ? ? ? ? ? ? return (2);
> + ? ? ? ? ? ? ? printf("not erased at %08lx (%x)\n", (ulong) addr, *addr);
> + ? ? ? ? ? ? ? return 2;
> ? ? ? ?}
> ? ? ? ?/* Disable interrupts which might cause a timeout here */
> ? ? ? ?flag = disable_interrupts ();
> @@ -472,12 +473,16 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
> ? ? ? ?/* wait while polling the status register */
> ? ? ? ?while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
> ? ? ? ? ? ? ? ?if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
> - ? ? ? ? ? ? ? ? ? ? ? *addr = (FPW) 0x00FF00FF; ? ? ? /* restore read mode */
> - ? ? ? ? ? ? ? ? ? ? ? return (1);
> + ? ? ? ? ? ? ? ? ? ? ? rc = 1;
> + ? ? ? ? ? ? ? ? ? ? ? goto done;
> ? ? ? ? ? ? ? ?}
> ? ? ? ?}
> +done:
> + ? ? ? if (flag)
> + ? ? ? ? ? ? ? enable_interrupts();
> +
> ? ? ? ?*addr = (FPW) 0x00FF00FF; ? ? ? /* restore read mode */
> - ? ? ? return (0);
> + ? ? ? return rc;
> ?}
>
> ?void inline spin_wheel (void)
> --
> 1.7.6.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
Tom
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 12/13] board/ti/omap730p2/flash.c: Fix GCC 4.6 build warnings
2011-12-09 11:14 ` [U-Boot] [PATCH 12/13] board/ti/omap730p2/flash.c: Fix GCC 4.6 build warnings Wolfgang Denk
@ 2011-12-09 14:58 ` Tom Rini
2011-12-10 22:12 ` Wolfgang Denk
1 sibling, 0 replies; 36+ messages in thread
From: Tom Rini @ 2011-12-09 14:58 UTC (permalink / raw)
To: u-boot
On Fri, Dec 9, 2011 at 4:14 AM, Wolfgang Denk <wd@denx.de> wrote:
> Fix:
> flash.c: In function 'flash_get_offsets':
> flash.c:122:10: warning: variable 'pOrgDef' set but not used
> [-Wunused-but-set-variable]
> flash.c: In function 'flash_erase':
> flash.c:263:6: warning: variable 'flag' set but not used
> [-Wunused-but-set-variable]
> flash.c: In function 'write_data':
> flash.c:439:6: warning: variable 'flag' set but not used
> [-Wunused-but-set-variable]
>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Dave Peverley <dpeverley@mpc-data.co.uk>
Acked-by: Tom Rini <trini@ti.com>
> ---
> ?board/ti/omap730p2/flash.c | ? 19 ++++++++++++-------
> ?1 files changed, 12 insertions(+), 7 deletions(-)
>
> diff --git a/board/ti/omap730p2/flash.c b/board/ti/omap730p2/flash.c
> index 185bc2d..a292627 100644
> --- a/board/ti/omap730p2/flash.c
> +++ b/board/ti/omap730p2/flash.c
> @@ -119,9 +119,7 @@ unsigned long flash_init (void)
> ?static void flash_get_offsets (ulong base, flash_info_t * info)
> ?{
> ? ? ? ?int i;
> - ? ? ? OrgDef *pOrgDef;
>
> - ? ? ? pOrgDef = OrgIntel_28F256L18T;
> ? ? ? ?if (info->flash_id == FLASH_UNKNOWN) {
> ? ? ? ? ? ? ? ?return;
> ? ? ? ?}
> @@ -335,6 +333,10 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
> ? ? ? ? ? ? ? ? ? ? ? ?printf (" done\n");
> ? ? ? ? ? ? ? ?}
> ? ? ? ?}
> +
> + ? ? ? if (flag)
> + ? ? ? ? ? ? ? enable_interrupts();
> +
> ? ? ? ?return rcode;
> ?}
>
> @@ -436,7 +438,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
> ?{
> ? ? ? ?FPWV *addr = (FPWV *) dest;
> ? ? ? ?ulong status;
> - ? ? ? int flag;
> + ? ? ? int flag, rc = 0;
> ? ? ? ?ulong start;
>
> ? ? ? ?/* Check if Flash is (sufficiently) erased */
> @@ -456,12 +458,15 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
> ? ? ? ?/* wait while polling the status register */
> ? ? ? ?while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
> ? ? ? ? ? ? ? ?if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
> - ? ? ? ? ? ? ? ? ? ? ? *addr = (FPW) 0x00FF00FF; ? ? ? /* restore read mode */
> - ? ? ? ? ? ? ? ? ? ? ? return (1);
> + ? ? ? ? ? ? ? ? ? ? ? rc = 1;
> + ? ? ? ? ? ? ? ? ? ? ? goto done;
> ? ? ? ? ? ? ? ?}
> ? ? ? ?}
> - ? ? ? *addr = (FPW) 0x00FF00FF; ? ? ? /* restore read mode */
> - ? ? ? return (0);
> +done:
> + ? ? ? *addr = (FPW)0x00FF00FF; ? ? ? ?/* restore read mode */
> + ? ? ? if (flag)
> + ? ? ? ? ? ? ? enable_interrupts();
> + ? ? ? return rc;
> ?}
>
> ?void inline spin_wheel (void)
> --
> 1.7.6.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
Tom
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 09/13] board/LaCie/edminiv2/edminiv2.c: Fix build warning
2011-12-09 11:14 ` [U-Boot] [PATCH 09/13] board/LaCie/edminiv2/edminiv2.c: Fix build warning Wolfgang Denk
@ 2011-12-09 15:11 ` Simon Guinot
2011-12-10 22:11 ` Wolfgang Denk
1 sibling, 0 replies; 36+ messages in thread
From: Simon Guinot @ 2011-12-09 15:11 UTC (permalink / raw)
To: u-boot
On Fri, Dec 09, 2011 at 12:14:28PM +0100, Wolfgang Denk wrote:
> Fix:
> edminiv2.c: In function 'reset_phy':
> edminiv2.c:98:2: warning: implicit declaration of function
> 'mv_phy_88e1116_init' [-Wimplicit-function-declaration]
>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
> ---
> board/LaCie/edminiv2/edminiv2.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c
> index c1a01bc..1b33875 100644
> --- a/board/LaCie/edminiv2/edminiv2.c
> +++ b/board/LaCie/edminiv2/edminiv2.c
> @@ -27,6 +27,7 @@
> #include <common.h>
> #include <miiphy.h>
> #include <asm/arch/orion5x.h>
> +#include "../common/common.h"
>
> DECLARE_GLOBAL_DATA_PTR;
>
My bad.
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
> --
> 1.7.6.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20111209/44420319/attachment.pgp>
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 04/13] common/cmd_pxe.c: Fix compile warning
2011-12-09 13:48 ` Jason Hobbs
@ 2011-12-09 20:45 ` Wolfgang Denk
2011-12-13 12:50 ` Jason Hobbs
0 siblings, 1 reply; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-09 20:45 UTC (permalink / raw)
To: u-boot
Dear Jason,
In message <20111209134819.GA26840@jhobbs-laptop> you wrote:
>
> > default:
> > printf("Ignoring malformed menu command: %.*s\n",
> > (int)(*c - s), s);
> > + err = -1;
>
> err should either be set to 0 here, or initialized to 0 at the top of
> the function. Setting it to -1 will cause the parser to give up rather
> than just printing out the warning message. It doesn't have to give up,
> and not giving up makes the parser more accommodating of pxelinux
> commands that aren't supported in U-Boot.
You have way more experience with PXE than me, but if we runinto this
case, doesn't that mean that the whole menu setup is severely broken,
and continuing is more or less invoking random behaviour?
If you really want to see a 0 here, then please feel free to submit an
updated / fixed patch.
Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I really hate this damned machine It never does quite what I want
I wish that they would sell it. But only what I tell it.
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 02/13] drivers/net/at91_emac.c: Fix GCC 4.6 build warnings
2011-12-09 11:14 ` [U-Boot] [PATCH 02/13] drivers/net/at91_emac.c: " Wolfgang Denk
@ 2011-12-10 22:08 ` Wolfgang Denk
0 siblings, 0 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-10 22:08 UTC (permalink / raw)
To: u-boot
Dear Wolfgang Denk,
In message <1323429272-26801-3-git-send-email-wd@denx.de> you wrote:
> Fix:
> at91_emac.c: In function 'at91emac_phy_init':
> at91_emac.c:244:20: warning: variable 'duplex' set but not used
> [-Wunused-but-set-variable]
> at91_emac.c:244:13: warning: variable 'speed' set but not used
> [-Wunused-but-set-variable]
>
> Use new debug_cond() to fix these warnings. In the result, anumber of
> inconsistent printf() formats are detected:
>
> at91_emac.c: In function 'at91emac_read':
> at91_emac.c:147:2: warning: format '%x' expects argument of type
> 'unsigned int', but argument 2 has type 'struct at91_emac_t *'
> [-Wformat]
> at91_emac.c: In function 'at91emac_write':
> at91_emac.c:157:2: warning: format '%x' expects argument of type
> 'unsigned int', but argument 2 has type 'struct at91_emac_t *'
> [-Wformat]
> at91_emac.c:157:2: warning: format '%x' expects argument of type
> 'unsigned int', but argument 4 has type 'short unsigned int *'
> [-Wformat]
> at91_emac.c: In function 'at91emac_recv':
> at91_emac.c:451:3: warning: format '%d' expects argument of type
> 'int', but argument 2 has type 'long unsigned int' [-Wformat]
> at91_emac.c:451:3: warning: format '%x' expects argument of type
> 'unsigned int', but argument 4 has type 'long unsigned int' [-Wformat]
>
> Fix these, too.
>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Jens Scharsig <js_at_ng@scharsoft.de>
> Cc: Andreas Bie?mann <andreas.devel@gmail.com>
> Cc: Reinhard Meyer <u-boot@emk-elektronik.de>
> ---
> drivers/net/at91_emac.c | 42 +++++++++++++++++++++++-------------------
> 1 files changed, 23 insertions(+), 19 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Boykottiert Microsoft - Kauft Eure Fenster bei OBI!
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 03/13] fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile warning (and bug)
2011-12-09 11:14 ` [U-Boot] [PATCH 03/13] fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile warning (and bug) Wolfgang Denk
2011-12-09 11:36 ` William Juul
@ 2011-12-10 22:08 ` Wolfgang Denk
1 sibling, 0 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-10 22:08 UTC (permalink / raw)
To: u-boot
Dear Wolfgang Denk,
In message <1323429272-26801-4-git-send-email-wd@denx.de> you wrote:
> Fix:
> yaffs_guts.c: In function 'yaffs_GarbageCollectBlock':
> yaffs_guts.c:2761:6: warning: variable 'retVal' set but not used
> [-Wunused-but-set-variable]
>
> Here GCC actually detected a bug. The code was always returning OK
> instead of the previously set retrun code. Fix that.
>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: William Juul <william.juul@tandberg.com>
> Cc: Scott Wood <scottwood@freescale.com>
> ---
> fs/yaffs2/yaffs_guts.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I distrust all systematisers, and avoid them. The will to a system
shows a lack of honesty.
- Friedrich Wilhelm Nietzsche _G?tzen-D?mmerung [The Twilight of the
Idols]_ ``Maxims and Missiles'' no. 26
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 05/13] boards.cfg: sort list
2011-12-09 11:14 ` [U-Boot] [PATCH 05/13] boards.cfg: sort list Wolfgang Denk
@ 2011-12-10 22:09 ` Wolfgang Denk
2011-12-10 22:39 ` Mike Frysinger
1 sibling, 0 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-10 22:09 UTC (permalink / raw)
To: u-boot
Dear Wolfgang Denk,
In message <1323429272-26801-6-git-send-email-wd@denx.de> you wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> ---
> boards.cfg | 218 ++++++++++++++++++++++++++++++------------------------------
> 1 files changed, 109 insertions(+), 109 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
We have phasers, I vote we blast 'em!
-- Bailey, "The Corbomite Maneuver", stardate 1514.2
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 06/13] board/apollon/apollon.c: Fix GCc 4.6 build warnings.
2011-12-09 11:14 ` [U-Boot] [PATCH 06/13] board/apollon/apollon.c: Fix GCc 4.6 build warnings Wolfgang Denk
@ 2011-12-10 22:09 ` Wolfgang Denk
0 siblings, 0 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-10 22:09 UTC (permalink / raw)
To: u-boot
Dear Wolfgang Denk,
In message <1323429272-26801-7-git-send-email-wd@denx.de> you wrote:
> Fix:
> apollon.c: In function 'dram_init':
> apollon.c:188:29: warning: variable 'cpu' set but not used
> [-Wunused-but-set-variable]
> apollon.c:188:20: warning: variable 'rev' set but not used
> [-Wunused-but-set-variable]
> apollon.c:187:26: warning: variable 'size1' set but not used
> [-Wunused-but-set-variable]
>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> board/apollon/apollon.c | 18 +++++++++---------
> 1 files changed, 9 insertions(+), 9 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Always try to do things in chronological order; it's less confusing
that way.
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 07/13] board/apollon/sys_info.c: Fix GCC 4.6 build warning
2011-12-09 11:14 ` [U-Boot] [PATCH 07/13] board/apollon/sys_info.c: Fix GCC 4.6 build warning Wolfgang Denk
@ 2011-12-10 22:10 ` Wolfgang Denk
0 siblings, 0 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-10 22:10 UTC (permalink / raw)
To: u-boot
Dear Wolfgang Denk,
In message <1323429272-26801-8-git-send-email-wd@denx.de> you wrote:
> Fix:
> sys_info.c: In function 'display_board_info':
> sys_info.c:260:16: warning: variable 'db_s' set but not used
> [-Wunused-but-set-variable]
>
> Also fix resulting warnings:
> sys_info.c:251:7: warning: unused variable 'db_ip' [-Wunused-variable]
> sys_info.c:250:7: warning: unused variable 'db_men' [-Wunused-variable]
>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> board/apollon/sys_info.c | 9 +--------
> 1 files changed, 1 insertions(+), 8 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
As far as the laws of mathematics refer to reality, they are not
certain; and as far as they are certain, they do not refer to
reality. -- Albert Einstein
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 08/13] ARM: convert "apollon" board to use boards.cfg
2011-12-09 11:14 ` [U-Boot] [PATCH 08/13] ARM: convert "apollon" board to use boards.cfg Wolfgang Denk
@ 2011-12-10 22:10 ` Wolfgang Denk
0 siblings, 0 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-10 22:10 UTC (permalink / raw)
To: u-boot
Dear Wolfgang Denk,
In message <1323429272-26801-9-git-send-email-wd@denx.de> you wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
> ---
> MAKEALL | 1 -
> Makefile | 10 ----------
> boards.cfg | 1 +
> include/configs/apollon.h | 2 ++
> 4 files changed, 3 insertions(+), 11 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Why is an average signature file longer than an average Perl script??
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 09/13] board/LaCie/edminiv2/edminiv2.c: Fix build warning
2011-12-09 11:14 ` [U-Boot] [PATCH 09/13] board/LaCie/edminiv2/edminiv2.c: Fix build warning Wolfgang Denk
2011-12-09 15:11 ` Simon Guinot
@ 2011-12-10 22:11 ` Wolfgang Denk
1 sibling, 0 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-10 22:11 UTC (permalink / raw)
To: u-boot
Dear Wolfgang Denk,
In message <1323429272-26801-10-git-send-email-wd@denx.de> you wrote:
> Fix:
> edminiv2.c: In function 'reset_phy':
> edminiv2.c:98:2: warning: implicit declaration of function
> 'mv_phy_88e1116_init' [-Wimplicit-function-declaration]
>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
> ---
> board/LaCie/edminiv2/edminiv2.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
People seldom know what they want until you give them what they ask
for.
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 10/13] board/ti/omap1610inn/flash.c: Fix GCC 4.6 build warnings
2011-12-09 11:14 ` [U-Boot] [PATCH 10/13] board/ti/omap1610inn/flash.c: Fix GCC 4.6 build warnings Wolfgang Denk
2011-12-09 14:57 ` Tom Rini
@ 2011-12-10 22:11 ` Wolfgang Denk
1 sibling, 0 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-10 22:11 UTC (permalink / raw)
To: u-boot
Dear Wolfgang Denk,
In message <1323429272-26801-11-git-send-email-wd@denx.de> you wrote:
> Fix:
> flash.c: In function 'flash_get_offsets':
> flash.c:139:10: warning: variable 'pOrgDef' set but not used
> [-Wunused-but-set-variable]
> flash.c: In function 'flash_erase':
> flash.c:280:6: warning: variable 'flag' set but not used
> [-Wunused-but-set-variable]
> flash.c: In function 'write_data':
> flash.c:456:6: warning: variable 'flag' set but not used
> [-Wunused-but-set-variable]
>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> ---
> board/ti/omap1610inn/flash.c | 21 +++++++++++++--------
> 1 files changed, 13 insertions(+), 8 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
HR Manager to job candidate "I see you've had no computer training.
Although that qualifies you for upper management, it means you're
under-qualified for our entry level positions."
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 11/13] ARM: convert "omap16xx" boards to boards.cfg
2011-12-09 11:14 ` [U-Boot] [PATCH 11/13] ARM: convert "omap16xx" boards to boards.cfg Wolfgang Denk
2011-12-09 14:56 ` Tom Rini
@ 2011-12-10 22:12 ` Wolfgang Denk
1 sibling, 0 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-10 22:12 UTC (permalink / raw)
To: u-boot
Dear Wolfgang Denk,
In message <1323429272-26801-12-git-send-email-wd@denx.de> you wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Kshitij Gupta <kshitij@ti.com>
> ---
> MAKEALL | 2 --
> Makefile | 20 --------------------
> boards.cfg | 8 ++++++++
> 3 files changed, 8 insertions(+), 22 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A little suffering is good for the soul.
-- Kirk, "The Corbomite Maneuver", stardate 1514.0
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 12/13] board/ti/omap730p2/flash.c: Fix GCC 4.6 build warnings
2011-12-09 11:14 ` [U-Boot] [PATCH 12/13] board/ti/omap730p2/flash.c: Fix GCC 4.6 build warnings Wolfgang Denk
2011-12-09 14:58 ` Tom Rini
@ 2011-12-10 22:12 ` Wolfgang Denk
1 sibling, 0 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-10 22:12 UTC (permalink / raw)
To: u-boot
Dear Wolfgang Denk,
In message <1323429272-26801-13-git-send-email-wd@denx.de> you wrote:
> Fix:
> flash.c: In function 'flash_get_offsets':
> flash.c:122:10: warning: variable 'pOrgDef' set but not used
> [-Wunused-but-set-variable]
> flash.c: In function 'flash_erase':
> flash.c:263:6: warning: variable 'flag' set but not used
> [-Wunused-but-set-variable]
> flash.c: In function 'write_data':
> flash.c:439:6: warning: variable 'flag' set but not used
> [-Wunused-but-set-variable]
>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Dave Peverley <dpeverley@mpc-data.co.uk>
> ---
> board/ti/omap730p2/flash.c | 19 ++++++++++++-------
> 1 files changed, 12 insertions(+), 7 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The human mind ordinarily operates at only ten percent of its capaci-
ty - the rest is overhead for the operating system.
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 13/13] ARM: convert "omap730p2" boards to boards.cfg
2011-12-09 11:14 ` [U-Boot] [PATCH 13/13] ARM: convert "omap730p2" boards to boards.cfg Wolfgang Denk
2011-12-09 14:55 ` Tom Rini
@ 2011-12-10 22:13 ` Wolfgang Denk
1 sibling, 0 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-10 22:13 UTC (permalink / raw)
To: u-boot
Dear Wolfgang Denk,
In message <1323429272-26801-14-git-send-email-wd@denx.de> you wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Dave Peverley <dpeverley@mpc-data.co.uk>
> ---
> MAKEALL | 1 -
> Makefile | 11 -----------
> boards.cfg | 3 +++
> 3 files changed, 3 insertions(+), 12 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
We fight only when there is no other choice. We prefer the ways of
peaceful contact.
-- Kirk, "Spectre of the Gun", stardate 4385.3
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 05/13] boards.cfg: sort list
2011-12-09 11:14 ` [U-Boot] [PATCH 05/13] boards.cfg: sort list Wolfgang Denk
2011-12-10 22:09 ` Wolfgang Denk
@ 2011-12-10 22:39 ` Mike Frysinger
2011-12-10 22:49 ` Wolfgang Denk
1 sibling, 1 reply; 36+ messages in thread
From: Mike Frysinger @ 2011-12-10 22:39 UTC (permalink / raw)
To: u-boot
maybe we should have mkconfig automatically do this ?
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20111210/4f17cba6/attachment.pgp>
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 05/13] boards.cfg: sort list
2011-12-10 22:39 ` Mike Frysinger
@ 2011-12-10 22:49 ` Wolfgang Denk
0 siblings, 0 replies; 36+ messages in thread
From: Wolfgang Denk @ 2011-12-10 22:49 UTC (permalink / raw)
To: u-boot
Dear Mike Frysinger,
In message <201112101739.26972.vapier@gentoo.org> you wrote:
>
> maybe we should have mkconfig automatically do this ?
No. Automatic scripts should never meddle with source files.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Anarchy may not be the best form of government, but it's better than
no government at all.
^ permalink raw reply [flat|nested] 36+ messages in thread
* [U-Boot] [PATCH 04/13] common/cmd_pxe.c: Fix compile warning
2011-12-09 20:45 ` Wolfgang Denk
@ 2011-12-13 12:50 ` Jason Hobbs
0 siblings, 0 replies; 36+ messages in thread
From: Jason Hobbs @ 2011-12-13 12:50 UTC (permalink / raw)
To: u-boot
On Fri, Dec 09, 2011 at 03:45:44PM -0500, Wolfgang Denk wrote:
> Dear Jason,
>
> In message <20111209134819.GA26840@jhobbs-laptop> you wrote:
> >
> > > default:
> > > printf("Ignoring malformed menu command: %.*s\n",
> > > (int)(*c - s), s);
> > > + err = -1;
> >
> > err should either be set to 0 here, or initialized to 0 at the top of
> > the function. Setting it to -1 will cause the parser to give up rather
> > than just printing out the warning message. It doesn't have to give up,
> > and not giving up makes the parser more accommodating of pxelinux
> > commands that aren't supported in U-Boot.
>
> You have way more experience with PXE than me, but if we runinto this
> case, doesn't that mean that the whole menu setup is severely broken,
> and continuing is more or less invoking random behaviour?
It only means that an unrecognized menu command was used. It could be
something aesthetic in nature, like a menu title command.
>
> If you really want to see a 0 here, then please feel free to submit an
> updated / fixed patch.
Heiko Schocher ended up sending a patch to do this today, which I've
acked.
Thanks,
Jason
^ permalink raw reply [flat|nested] 36+ messages in thread
end of thread, other threads:[~2011-12-13 12:50 UTC | newest]
Thread overview: 36+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-12-09 11:14 [U-Boot] [PATCH 00/13] ARM: more cleanups Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 01/13] drivers/net/ne2000_base.c: Fix GCC 4.6 build warnings Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 02/13] drivers/net/at91_emac.c: " Wolfgang Denk
2011-12-10 22:08 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 03/13] fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile warning (and bug) Wolfgang Denk
2011-12-09 11:36 ` William Juul
2011-12-10 22:08 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 04/13] common/cmd_pxe.c: Fix compile warning Wolfgang Denk
2011-12-09 13:48 ` Jason Hobbs
2011-12-09 20:45 ` Wolfgang Denk
2011-12-13 12:50 ` Jason Hobbs
2011-12-09 11:14 ` [U-Boot] [PATCH 05/13] boards.cfg: sort list Wolfgang Denk
2011-12-10 22:09 ` Wolfgang Denk
2011-12-10 22:39 ` Mike Frysinger
2011-12-10 22:49 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 06/13] board/apollon/apollon.c: Fix GCc 4.6 build warnings Wolfgang Denk
2011-12-10 22:09 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 07/13] board/apollon/sys_info.c: Fix GCC 4.6 build warning Wolfgang Denk
2011-12-10 22:10 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 08/13] ARM: convert "apollon" board to use boards.cfg Wolfgang Denk
2011-12-10 22:10 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 09/13] board/LaCie/edminiv2/edminiv2.c: Fix build warning Wolfgang Denk
2011-12-09 15:11 ` Simon Guinot
2011-12-10 22:11 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 10/13] board/ti/omap1610inn/flash.c: Fix GCC 4.6 build warnings Wolfgang Denk
2011-12-09 14:57 ` Tom Rini
2011-12-10 22:11 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 11/13] ARM: convert "omap16xx" boards to boards.cfg Wolfgang Denk
2011-12-09 14:56 ` Tom Rini
2011-12-10 22:12 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 12/13] board/ti/omap730p2/flash.c: Fix GCC 4.6 build warnings Wolfgang Denk
2011-12-09 14:58 ` Tom Rini
2011-12-10 22:12 ` Wolfgang Denk
2011-12-09 11:14 ` [U-Boot] [PATCH 13/13] ARM: convert "omap730p2" boards to boards.cfg Wolfgang Denk
2011-12-09 14:55 ` Tom Rini
2011-12-10 22:13 ` Wolfgang Denk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.