* [PATCH 0/4] arm: Remove Telechips subarchitecture
@ 2011-12-22 21:19 Hans J. Koch
2011-12-22 21:22 ` [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS Hans J. Koch
` (3 more replies)
0 siblings, 4 replies; 13+ messages in thread
From: Hans J. Koch @ 2011-12-22 21:19 UTC (permalink / raw)
To: linux-arm-kernel
Unfortunately, nobody is interested in having support for Telechips' SoCs in
mainline. With neither feedback nor support from anywhere, I am not willing
to maintain this any longer.
Russell requires subarchs to be up-to-date and maintainers to do their work
to prevent their subarchs from bit-rotting. That is completely the right
thing to do.
For me, the only possible course of action is to completely remove the
whole Telechips subarchitecture. I'll reply to this mail with a series of
four patches that does this.
Thanks,
Hans
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS
2011-12-22 21:19 [PATCH 0/4] arm: Remove Telechips subarchitecture Hans J. Koch
@ 2011-12-22 21:22 ` Hans J. Koch
2012-01-03 17:08 ` Russell King - ARM Linux
2011-12-22 21:24 ` [PATCH 2/4] arm: Remove TCC subarch from Kconfig/Makefile Hans J. Koch
` (2 subsequent siblings)
3 siblings, 1 reply; 13+ messages in thread
From: Hans J. Koch @ 2011-12-22 21:22 UTC (permalink / raw)
To: linux-arm-kernel
The AMR subarchitecture for Telechips SoCs is completely removed,
so there's no need for a MAINTAINERS entry.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Harry Sievers <hsievers@csselectronic.com>
Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
---
MAINTAINERS | 7 -------
1 files changed, 0 insertions(+), 7 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index b9db108..555afaa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1124,13 +1124,6 @@ S: Supported
F: arch/arm/mach-shmobile/
F: drivers/sh/
-ARM/TELECHIPS ARM ARCHITECTURE
-M: "Hans J. Koch" <hjk@hansjkoch.de>
-L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm/plat-tcc/
-F: arch/arm/mach-tcc8k/
-
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
--
1.7.6.3
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 2/4] arm: Remove TCC subarch from Kconfig/Makefile
2011-12-22 21:19 [PATCH 0/4] arm: Remove Telechips subarchitecture Hans J. Koch
2011-12-22 21:22 ` [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS Hans J. Koch
@ 2011-12-22 21:24 ` Hans J. Koch
2011-12-22 21:26 ` [PATCH 3/4] arm: Remove mach-tcc8k directory Hans J. Koch
2011-12-22 21:28 ` [PATCH 4/4] arm: Remove plat-tcc directory Hans J. Koch
3 siblings, 0 replies; 13+ messages in thread
From: Hans J. Koch @ 2011-12-22 21:24 UTC (permalink / raw)
To: linux-arm-kernel
The Telechips subarchitecture is being completely removed.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Harry Sievers <hsievers@csselectronic.com>
Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
---
arch/arm/Kconfig | 10 ----------
arch/arm/Makefile | 2 --
2 files changed, 0 insertions(+), 12 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 776d76b..1e7dd4b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -868,16 +868,6 @@ config ARCH_SHARK
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
-config ARCH_TCC_926
- bool "Telechips TCC ARM926-based systems"
- select CLKSRC_MMIO
- select CPU_ARM926T
- select HAVE_CLK
- select CLKDEV_LOOKUP
- select GENERIC_CLOCKEVENTS
- help
- Support for Telechips TCC ARM926-based systems.
-
config ARCH_U300
bool "ST-Ericsson U300 Series"
depends on MMU
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index dfcf3b0..40319d9 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -184,7 +184,6 @@ machine-$(CONFIG_ARCH_EXYNOS4) := exynos
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
-machine-$(CONFIG_ARCH_TCC8K) := tcc8k
machine-$(CONFIG_ARCH_TEGRA) := tegra
machine-$(CONFIG_ARCH_U300) := u300
machine-$(CONFIG_ARCH_U8500) := ux500
@@ -204,7 +203,6 @@ machine-$(CONFIG_ARCH_ZYNQ) := zynq
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_ARCH_S3C64XX) := samsung
-plat-$(CONFIG_ARCH_TCC_926) := tcc
plat-$(CONFIG_ARCH_ZYNQ) := versatile
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
--
1.7.6.3
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 3/4] arm: Remove mach-tcc8k directory
2011-12-22 21:19 [PATCH 0/4] arm: Remove Telechips subarchitecture Hans J. Koch
2011-12-22 21:22 ` [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS Hans J. Koch
2011-12-22 21:24 ` [PATCH 2/4] arm: Remove TCC subarch from Kconfig/Makefile Hans J. Koch
@ 2011-12-22 21:26 ` Hans J. Koch
2011-12-22 21:28 ` [PATCH 4/4] arm: Remove plat-tcc directory Hans J. Koch
3 siblings, 0 replies; 13+ messages in thread
From: Hans J. Koch @ 2011-12-22 21:26 UTC (permalink / raw)
To: linux-arm-kernel
The Telechips ARM architecture is being removed. This patch
deletes the arch/arm/mach-tcc8k/ folder.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Harry Sievers <hsievers@csselectronic.com>
Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
---
arch/arm/mach-tcc8k/Kconfig | 11 -
arch/arm/mach-tcc8k/Makefile | 9 -
arch/arm/mach-tcc8k/Makefile.boot | 3 -
arch/arm/mach-tcc8k/board-tcc8000-sdk.c | 81 -----
arch/arm/mach-tcc8k/clock.c | 580 -------------------------------
arch/arm/mach-tcc8k/common.h | 15 -
arch/arm/mach-tcc8k/devices.c | 239 -------------
arch/arm/mach-tcc8k/io.c | 62 ----
arch/arm/mach-tcc8k/irq.c | 111 ------
arch/arm/mach-tcc8k/time.c | 134 -------
10 files changed, 0 insertions(+), 1245 deletions(-)
delete mode 100644 arch/arm/mach-tcc8k/Kconfig
delete mode 100644 arch/arm/mach-tcc8k/Makefile
delete mode 100644 arch/arm/mach-tcc8k/Makefile.boot
delete mode 100644 arch/arm/mach-tcc8k/board-tcc8000-sdk.c
delete mode 100644 arch/arm/mach-tcc8k/clock.c
delete mode 100644 arch/arm/mach-tcc8k/common.h
delete mode 100644 arch/arm/mach-tcc8k/devices.c
delete mode 100644 arch/arm/mach-tcc8k/io.c
delete mode 100644 arch/arm/mach-tcc8k/irq.c
delete mode 100644 arch/arm/mach-tcc8k/time.c
diff --git a/arch/arm/mach-tcc8k/Kconfig b/arch/arm/mach-tcc8k/Kconfig
deleted file mode 100644
index ad86415..0000000
--- a/arch/arm/mach-tcc8k/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-if ARCH_TCC8K
-
-comment "TCC8000 systems:"
-
-config MACH_TCC8000_SDK
- bool "Telechips TCC8000-SDK development kit"
- default y
- help
- Support for the Telechips TCC8000-SDK board.
-
-endif
diff --git a/arch/arm/mach-tcc8k/Makefile b/arch/arm/mach-tcc8k/Makefile
deleted file mode 100644
index 9bacf31..0000000
--- a/arch/arm/mach-tcc8k/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for TCC8K boards and common files.
-#
-
-# Common support
-obj-y += clock.o irq.o time.o io.o devices.o
-
-# Board specific support
-obj-$(CONFIG_MACH_TCC8000_SDK) += board-tcc8000-sdk.o
diff --git a/arch/arm/mach-tcc8k/Makefile.boot b/arch/arm/mach-tcc8k/Makefile.boot
deleted file mode 100644
index 5e02d41..0000000
--- a/arch/arm/mach-tcc8k/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
- zreladdr-y += 0x20008000
-params_phys-y := 0x20000100
-initrd_phys-y := 0x20800000
diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
deleted file mode 100644
index 777a5bb..0000000
--- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/clock.h>
-#include <mach/tcc-nand.h>
-#include <mach/tcc8k-regs.h>
-
-#include "common.h"
-
-#define XI_FREQUENCY 12000000
-#define XTI_FREQUENCY 32768
-
-#ifdef CONFIG_MTD_NAND_TCC
-/* NAND */
-static struct tcc_nand_platform_data tcc8k_sdk_nand_data = {
- .width = 1,
- .hw_ecc = 0,
-};
-#endif
-
-static void __init tcc8k_init(void)
-{
-#ifdef CONFIG_MTD_NAND_TCC
- tcc_nand_device.dev.platform_data = &tcc8k_sdk_nand_data;
- platform_device_register(&tcc_nand_device);
-#endif
-}
-
-static void __init tcc8k_init_timer(void)
-{
- tcc_clocks_init(XI_FREQUENCY, XTI_FREQUENCY);
-}
-
-static struct sys_timer tcc8k_timer = {
- .init = tcc8k_init_timer,
-};
-
-static void __init tcc8k_map_io(void)
-{
- tcc8k_map_common_io();
-
- /* set PLL0 clock to 96MHz, adapt UART0 divisor */
- __raw_writel(0x00026003, CKC_BASE + PLL0CFG_OFFS);
- __raw_writel(0x10000001, CKC_BASE + ACLKUART0_OFFS);
-
- /* set PLL1 clock to 192MHz */
- __raw_writel(0x00016003, CKC_BASE + PLL1CFG_OFFS);
-
- /* set PLL2 clock to 48MHz */
- __raw_writel(0x00036003, CKC_BASE + PLL2CFG_OFFS);
-
- /* with CPU freq higher than 150 MHz, need extra DTCM wait */
- __raw_writel(0x00000001, SCFG_BASE + DTCMWAIT_OFFS);
-
- /* PLL locking time as specified */
- udelay(300);
-}
-
-MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
- .atag_offset = 0x100,
- .map_io = tcc8k_map_io,
- .init_irq = tcc8k_init_irq,
- .init_machine = tcc8k_init,
- .timer = &tcc8k_timer,
-MACHINE_END
diff --git a/arch/arm/mach-tcc8k/clock.c b/arch/arm/mach-tcc8k/clock.c
deleted file mode 100644
index e7cdae5..0000000
--- a/arch/arm/mach-tcc8k/clock.c
+++ /dev/null
@@ -1,580 +0,0 @@
-/*
- * Lowlevel clock handling for Telechips TCC8xxx SoCs
- *
- * Copyright (C) 2010 by Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/irqs.h>
-#include <mach/tcc8k-regs.h>
-
-#include "common.h"
-
-#define BCLKCTR0 (CKC_BASE + BCLKCTR0_OFFS)
-#define BCLKCTR1 (CKC_BASE + BCLKCTR1_OFFS)
-
-#define ACLKREF (CKC_BASE + ACLKREF_OFFS)
-#define ACLKUART0 (CKC_BASE + ACLKUART0_OFFS)
-#define ACLKUART1 (CKC_BASE + ACLKUART1_OFFS)
-#define ACLKUART2 (CKC_BASE + ACLKUART2_OFFS)
-#define ACLKUART3 (CKC_BASE + ACLKUART3_OFFS)
-#define ACLKUART4 (CKC_BASE + ACLKUART4_OFFS)
-#define ACLKI2C (CKC_BASE + ACLKI2C_OFFS)
-#define ACLKADC (CKC_BASE + ACLKADC_OFFS)
-#define ACLKUSBH (CKC_BASE + ACLKUSBH_OFFS)
-#define ACLKLCD (CKC_BASE + ACLKLCD_OFFS)
-#define ACLKSDH0 (CKC_BASE + ACLKSDH0_OFFS)
-#define ACLKSDH1 (CKC_BASE + ACLKSDH1_OFFS)
-#define ACLKSPI0 (CKC_BASE + ACLKSPI0_OFFS)
-#define ACLKSPI1 (CKC_BASE + ACLKSPI1_OFFS)
-#define ACLKSPDIF (CKC_BASE + ACLKSPDIF_OFFS)
-#define ACLKC3DEC (CKC_BASE + ACLKC3DEC_OFFS)
-#define ACLKCAN0 (CKC_BASE + ACLKCAN0_OFFS)
-#define ACLKCAN1 (CKC_BASE + ACLKCAN1_OFFS)
-#define ACLKGSB0 (CKC_BASE + ACLKGSB0_OFFS)
-#define ACLKGSB1 (CKC_BASE + ACLKGSB1_OFFS)
-#define ACLKGSB2 (CKC_BASE + ACLKGSB2_OFFS)
-#define ACLKGSB3 (CKC_BASE + ACLKGSB3_OFFS)
-#define ACLKTCT (CKC_BASE + ACLKTCT_OFFS)
-#define ACLKTCX (CKC_BASE + ACLKTCX_OFFS)
-#define ACLKTCZ (CKC_BASE + ACLKTCZ_OFFS)
-
-#define ACLK_MAX_DIV (0xfff + 1)
-
-/* Crystal frequencies */
-static unsigned long xi_rate, xti_rate;
-
-static void __iomem *pll_cfg_addr(int pll)
-{
- switch (pll) {
- case 0: return (CKC_BASE + PLL0CFG_OFFS);
- case 1: return (CKC_BASE + PLL1CFG_OFFS);
- case 2: return (CKC_BASE + PLL2CFG_OFFS);
- default:
- BUG();
- }
-}
-
-static int pll_enable(int pll, int enable)
-{
- u32 reg;
- void __iomem *addr = pll_cfg_addr(pll);
-
- reg = __raw_readl(addr);
- if (enable)
- reg &= ~PLLxCFG_PD;
- else
- reg |= PLLxCFG_PD;
-
- __raw_writel(reg, addr);
- return 0;
-}
-
-static int xi_enable(int enable)
-{
- u32 reg;
-
- reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
- if (enable)
- reg |= CLKCTRL_XE;
- else
- reg &= ~CLKCTRL_XE;
-
- __raw_writel(reg, CKC_BASE + CLKCTRL_OFFS);
- return 0;
-}
-
-static int root_clk_enable(enum root_clks src)
-{
- switch (src) {
- case CLK_SRC_PLL0: return pll_enable(0, 1);
- case CLK_SRC_PLL1: return pll_enable(1, 1);
- case CLK_SRC_PLL2: return pll_enable(2, 1);
- case CLK_SRC_XI: return xi_enable(1);
- default:
- BUG();
- }
- return 0;
-}
-
-static int root_clk_disable(enum root_clks src)
-{
- switch (src) {
- case CLK_SRC_PLL0: return pll_enable(0, 0);
- case CLK_SRC_PLL1: return pll_enable(1, 0);
- case CLK_SRC_PLL2: return pll_enable(2, 0);
- case CLK_SRC_XI: return xi_enable(0);
- default:
- BUG();
- }
- return 0;
-}
-
-static int enable_clk(struct clk *clk)
-{
- u32 reg;
-
- if (clk->root_id != CLK_SRC_NOROOT)
- return root_clk_enable(clk->root_id);
-
- if (clk->aclkreg) {
- reg = __raw_readl(clk->aclkreg);
- reg |= ACLK_EN;
- __raw_writel(reg, clk->aclkreg);
- }
- if (clk->bclkctr) {
- reg = __raw_readl(clk->bclkctr);
- reg |= 1 << clk->bclk_shift;
- __raw_writel(reg, clk->bclkctr);
- }
- return 0;
-}
-
-static void disable_clk(struct clk *clk)
-{
- u32 reg;
-
- if (clk->root_id != CLK_SRC_NOROOT) {
- root_clk_disable(clk->root_id);
- return;
- }
-
- if (clk->bclkctr) {
- reg = __raw_readl(clk->bclkctr);
- reg &= ~(1 << clk->bclk_shift);
- __raw_writel(reg, clk->bclkctr);
- }
- if (clk->aclkreg) {
- reg = __raw_readl(clk->aclkreg);
- reg &= ~ACLK_EN;
- __raw_writel(reg, clk->aclkreg);
- }
-}
-
-static unsigned long get_rate_pll(int pll)
-{
- u32 reg;
- unsigned long s, m, p;
- void __iomem *addr = pll_cfg_addr(pll);
-
- reg = __raw_readl(addr);
- s = (reg >> 16) & 0x07;
- m = (reg >> 8) & 0xff;
- p = reg & 0x3f;
-
- return (m * xi_rate) / (p * (1 << s));
-}
-
-static unsigned long get_rate_pll_div(int pll)
-{
- u32 reg;
- unsigned long div = 0;
- void __iomem *addr;
-
- switch (pll) {
- case 0:
- addr = CKC_BASE + CLKDIVC0_OFFS;
- reg = __raw_readl(addr);
- if (reg & CLKDIVC0_P0E)
- div = (reg >> 24) & 0x3f;
- break;
- case 1:
- addr = CKC_BASE + CLKDIVC0_OFFS;
- reg = __raw_readl(addr);
- if (reg & CLKDIVC0_P1E)
- div = (reg >> 16) & 0x3f;
- break;
- case 2:
- addr = CKC_BASE + CLKDIVC1_OFFS;
- reg = __raw_readl(addr);
- if (reg & CLKDIVC1_P2E)
- div = reg & 0x3f;
- break;
- }
- return get_rate_pll(pll) / (div + 1);
-}
-
-static unsigned long get_rate_xi_div(void)
-{
- unsigned long div = 0;
- u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS);
-
- if (reg & CLKDIVC0_XE)
- div = (reg >> 8) & 0x3f;
-
- return xi_rate / (div + 1);
-}
-
-static unsigned long get_rate_xti_div(void)
-{
- unsigned long div = 0;
- u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS);
-
- if (reg & CLKDIVC0_XTE)
- div = reg & 0x3f;
-
- return xti_rate / (div + 1);
-}
-
-static unsigned long root_clk_get_rate(enum root_clks src)
-{
- switch (src) {
- case CLK_SRC_PLL0: return get_rate_pll(0);
- case CLK_SRC_PLL1: return get_rate_pll(1);
- case CLK_SRC_PLL2: return get_rate_pll(2);
- case CLK_SRC_PLL0DIV: return get_rate_pll_div(0);
- case CLK_SRC_PLL1DIV: return get_rate_pll_div(1);
- case CLK_SRC_PLL2DIV: return get_rate_pll_div(2);
- case CLK_SRC_XI: return xi_rate;
- case CLK_SRC_XTI: return xti_rate;
- case CLK_SRC_XIDIV: return get_rate_xi_div();
- case CLK_SRC_XTIDIV: return get_rate_xti_div();
- default: return 0;
- }
-}
-
-static unsigned long aclk_get_rate(struct clk *clk)
-{
- u32 reg;
- unsigned long div;
- unsigned int src;
-
- reg = __raw_readl(clk->aclkreg);
- div = reg & 0x0fff;
- src = (reg >> ACLK_SEL_SHIFT) & CLK_SRC_MASK;
- return root_clk_get_rate(src) / (div + 1);
-}
-
-static unsigned long aclk_best_div(struct clk *clk, unsigned long rate)
-{
- unsigned long div, src, freq, r1, r2;
-
- if (!rate)
- return ACLK_MAX_DIV;
-
- src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
- src &= CLK_SRC_MASK;
- freq = root_clk_get_rate(src);
- div = freq / rate;
- if (!div)
- return 1;
- if (div >= ACLK_MAX_DIV)
- return ACLK_MAX_DIV;
- r1 = freq / div;
- r2 = freq / (div + 1);
- if ((rate - r2) < (r1 - rate))
- return div + 1;
-
- return div;
-}
-
-static unsigned long aclk_round_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int src;
-
- src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
- src &= CLK_SRC_MASK;
-
- return root_clk_get_rate(src) / aclk_best_div(clk, rate);
-}
-
-static int aclk_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg;
-
- reg = __raw_readl(clk->aclkreg) & ~ACLK_DIV_MASK;
- reg |= aclk_best_div(clk, rate) - 1;
- __raw_writel(reg, clk->aclkreg);
- return 0;
-}
-
-static unsigned long get_rate_sys(struct clk *clk)
-{
- unsigned int src;
-
- src = __raw_readl(CKC_BASE + CLKCTRL_OFFS) & CLK_SRC_MASK;
- return root_clk_get_rate(src);
-}
-
-static unsigned long get_rate_bus(struct clk *clk)
-{
- unsigned int reg, sdiv, bdiv, rate;
-
- reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
- rate = get_rate_sys(clk);
- sdiv = (reg >> 20) & 3;
- if (sdiv)
- rate /= sdiv + 1;
- bdiv = (reg >> 4) & 0xff;
- if (bdiv)
- rate /= bdiv + 1;
- return rate;
-}
-
-static unsigned long get_rate_cpu(struct clk *clk)
-{
- unsigned int reg, div, fsys, fbus;
-
- fbus = get_rate_bus(clk);
- reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
- if (reg & (1 << 29))
- return fbus;
- fsys = get_rate_sys(clk);
- div = (reg >> 16) & 0x0f;
- return fbus + ((fsys - fbus) * (div + 1)) / 16;
-}
-
-static unsigned long get_rate_root(struct clk *clk)
-{
- return root_clk_get_rate(clk->root_id);
-}
-
-static int aclk_set_parent(struct clk *clock, struct clk *parent)
-{
- u32 reg;
-
- if (clock->parent == parent)
- return 0;
-
- clock->parent = parent;
-
- if (!parent)
- return 0;
-
- if (parent->root_id == CLK_SRC_NOROOT)
- return 0;
- reg = __raw_readl(clock->aclkreg);
- reg &= ~ACLK_SEL_MASK;
- reg |= (parent->root_id << ACLK_SEL_SHIFT) & ACLK_SEL_MASK;
- __raw_writel(reg, clock->aclkreg);
-
- return 0;
-}
-
-#define DEFINE_ROOT_CLOCK(name, ri, p) \
- static struct clk name = { \
- .root_id = ri, \
- .get_rate = get_rate_root, \
- .enable = enable_clk, \
- .disable = disable_clk, \
- .parent = p, \
- };
-
-#define DEFINE_SPECIAL_CLOCK(name, gr, p) \
- static struct clk name = { \
- .root_id = CLK_SRC_NOROOT, \
- .get_rate = gr, \
- .parent = p, \
- };
-
-#define DEFINE_ACLOCK(name, bc, bs, ar) \
- static struct clk name = { \
- .root_id = CLK_SRC_NOROOT, \
- .bclkctr = bc, \
- .bclk_shift = bs, \
- .aclkreg = ar, \
- .get_rate = aclk_get_rate, \
- .set_rate = aclk_set_rate, \
- .round_rate = aclk_round_rate, \
- .enable = enable_clk, \
- .disable = disable_clk, \
- .set_parent = aclk_set_parent, \
- };
-
-#define DEFINE_BCLOCK(name, bc, bs, gr, p) \
- static struct clk name = { \
- .root_id = CLK_SRC_NOROOT, \
- .bclkctr = bc, \
- .bclk_shift = bs, \
- .get_rate = gr, \
- .enable = enable_clk, \
- .disable = disable_clk, \
- .parent = p, \
- };
-
-DEFINE_ROOT_CLOCK(xi, CLK_SRC_XI, NULL)
-DEFINE_ROOT_CLOCK(xti, CLK_SRC_XTI, NULL)
-DEFINE_ROOT_CLOCK(xidiv, CLK_SRC_XIDIV, &xi)
-DEFINE_ROOT_CLOCK(xtidiv, CLK_SRC_XTIDIV, &xti)
-DEFINE_ROOT_CLOCK(pll0, CLK_SRC_PLL0, &xi)
-DEFINE_ROOT_CLOCK(pll1, CLK_SRC_PLL1, &xi)
-DEFINE_ROOT_CLOCK(pll2, CLK_SRC_PLL2, &xi)
-DEFINE_ROOT_CLOCK(pll0div, CLK_SRC_PLL0DIV, &pll0)
-DEFINE_ROOT_CLOCK(pll1div, CLK_SRC_PLL1DIV, &pll1)
-DEFINE_ROOT_CLOCK(pll2div, CLK_SRC_PLL2DIV, &pll2)
-
-/* The following 3 clocks are special and are initialized explicitly later */
-DEFINE_SPECIAL_CLOCK(sys, get_rate_sys, NULL)
-DEFINE_SPECIAL_CLOCK(bus, get_rate_bus, &sys)
-DEFINE_SPECIAL_CLOCK(cpu, get_rate_cpu, &sys)
-
-DEFINE_ACLOCK(tct, NULL, 0, ACLKTCT)
-DEFINE_ACLOCK(tcx, NULL, 0, ACLKTCX)
-DEFINE_ACLOCK(tcz, NULL, 0, ACLKTCZ)
-DEFINE_ACLOCK(ref, NULL, 0, ACLKREF)
-DEFINE_ACLOCK(uart0, BCLKCTR0, 5, ACLKUART0)
-DEFINE_ACLOCK(uart1, BCLKCTR0, 23, ACLKUART1)
-DEFINE_ACLOCK(uart2, BCLKCTR0, 6, ACLKUART2)
-DEFINE_ACLOCK(uart3, BCLKCTR0, 8, ACLKUART3)
-DEFINE_ACLOCK(uart4, BCLKCTR1, 6, ACLKUART4)
-DEFINE_ACLOCK(i2c, BCLKCTR0, 7, ACLKI2C)
-DEFINE_ACLOCK(adc, BCLKCTR0, 10, ACLKADC)
-DEFINE_ACLOCK(usbh0, BCLKCTR0, 11, ACLKUSBH)
-DEFINE_ACLOCK(lcd, BCLKCTR0, 13, ACLKLCD)
-DEFINE_ACLOCK(sd0, BCLKCTR0, 17, ACLKSDH0)
-DEFINE_ACLOCK(sd1, BCLKCTR1, 5, ACLKSDH1)
-DEFINE_ACLOCK(spi0, BCLKCTR0, 24, ACLKSPI0)
-DEFINE_ACLOCK(spi1, BCLKCTR0, 30, ACLKSPI1)
-DEFINE_ACLOCK(spdif, BCLKCTR1, 2, ACLKSPDIF)
-DEFINE_ACLOCK(c3dec, BCLKCTR1, 9, ACLKC3DEC)
-DEFINE_ACLOCK(can0, BCLKCTR1, 10, ACLKCAN0)
-DEFINE_ACLOCK(can1, BCLKCTR1, 11, ACLKCAN1)
-DEFINE_ACLOCK(gsb0, BCLKCTR1, 13, ACLKGSB0)
-DEFINE_ACLOCK(gsb1, BCLKCTR1, 14, ACLKGSB1)
-DEFINE_ACLOCK(gsb2, BCLKCTR1, 15, ACLKGSB2)
-DEFINE_ACLOCK(gsb3, BCLKCTR1, 16, ACLKGSB3)
-DEFINE_ACLOCK(usbh1, BCLKCTR1, 20, ACLKUSBH)
-
-DEFINE_BCLOCK(dai0, BCLKCTR0, 0, NULL, NULL)
-DEFINE_BCLOCK(pic, BCLKCTR0, 1, NULL, NULL)
-DEFINE_BCLOCK(tc, BCLKCTR0, 2, NULL, NULL)
-DEFINE_BCLOCK(gpio, BCLKCTR0, 3, NULL, NULL)
-DEFINE_BCLOCK(usbd, BCLKCTR0, 4, NULL, NULL)
-DEFINE_BCLOCK(ecc, BCLKCTR0, 9, NULL, NULL)
-DEFINE_BCLOCK(gdma0, BCLKCTR0, 12, NULL, NULL)
-DEFINE_BCLOCK(rtc, BCLKCTR0, 15, NULL, NULL)
-DEFINE_BCLOCK(nfc, BCLKCTR0, 16, NULL, NULL)
-DEFINE_BCLOCK(g2d, BCLKCTR0, 18, NULL, NULL)
-DEFINE_BCLOCK(gdma1, BCLKCTR0, 22, NULL, NULL)
-DEFINE_BCLOCK(mscl, BCLKCTR0, 25, NULL, NULL)
-DEFINE_BCLOCK(bdma, BCLKCTR1, 0, NULL, NULL)
-DEFINE_BCLOCK(adma0, BCLKCTR1, 1, NULL, NULL)
-DEFINE_BCLOCK(scfg, BCLKCTR1, 3, NULL, NULL)
-DEFINE_BCLOCK(cid, BCLKCTR1, 4, NULL, NULL)
-DEFINE_BCLOCK(dai1, BCLKCTR1, 7, NULL, NULL)
-DEFINE_BCLOCK(adma1, BCLKCTR1, 8, NULL, NULL)
-DEFINE_BCLOCK(gps, BCLKCTR1, 12, NULL, NULL)
-DEFINE_BCLOCK(gdma2, BCLKCTR1, 17, NULL, NULL)
-DEFINE_BCLOCK(gdma3, BCLKCTR1, 18, NULL, NULL)
-DEFINE_BCLOCK(ddrc, BCLKCTR1, 19, NULL, NULL)
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK(NULL, "bus", bus)
- _REGISTER_CLOCK(NULL, "cpu", cpu)
- _REGISTER_CLOCK(NULL, "tct", tct)
- _REGISTER_CLOCK(NULL, "tcx", tcx)
- _REGISTER_CLOCK(NULL, "tcz", tcz)
- _REGISTER_CLOCK(NULL, "ref", ref)
- _REGISTER_CLOCK(NULL, "dai0", dai0)
- _REGISTER_CLOCK(NULL, "pic", pic)
- _REGISTER_CLOCK(NULL, "tc", tc)
- _REGISTER_CLOCK(NULL, "gpio", gpio)
- _REGISTER_CLOCK(NULL, "usbd", usbd)
- _REGISTER_CLOCK("tcc-uart.0", NULL, uart0)
- _REGISTER_CLOCK("tcc-uart.2", NULL, uart2)
- _REGISTER_CLOCK("tcc-i2c", NULL, i2c)
- _REGISTER_CLOCK("tcc-uart.3", NULL, uart3)
- _REGISTER_CLOCK(NULL, "ecc", ecc)
- _REGISTER_CLOCK(NULL, "adc", adc)
- _REGISTER_CLOCK("tcc-usbh.0", "usb", usbh0)
- _REGISTER_CLOCK(NULL, "gdma0", gdma0)
- _REGISTER_CLOCK(NULL, "lcd", lcd)
- _REGISTER_CLOCK(NULL, "rtc", rtc)
- _REGISTER_CLOCK(NULL, "nfc", nfc)
- _REGISTER_CLOCK("tcc-mmc.0", NULL, sd0)
- _REGISTER_CLOCK(NULL, "g2d", g2d)
- _REGISTER_CLOCK(NULL, "gdma1", gdma1)
- _REGISTER_CLOCK("tcc-uart.1", NULL, uart1)
- _REGISTER_CLOCK("tcc-spi.0", NULL, spi0)
- _REGISTER_CLOCK(NULL, "mscl", mscl)
- _REGISTER_CLOCK("tcc-spi.1", NULL, spi1)
- _REGISTER_CLOCK(NULL, "bdma", bdma)
- _REGISTER_CLOCK(NULL, "adma0", adma0)
- _REGISTER_CLOCK(NULL, "spdif", spdif)
- _REGISTER_CLOCK(NULL, "scfg", scfg)
- _REGISTER_CLOCK(NULL, "cid", cid)
- _REGISTER_CLOCK("tcc-mmc.1", NULL, sd1)
- _REGISTER_CLOCK("tcc-uart.4", NULL, uart4)
- _REGISTER_CLOCK(NULL, "dai1", dai1)
- _REGISTER_CLOCK(NULL, "adma1", adma1)
- _REGISTER_CLOCK(NULL, "c3dec", c3dec)
- _REGISTER_CLOCK("tcc-can.0", NULL, can0)
- _REGISTER_CLOCK("tcc-can.1", NULL, can1)
- _REGISTER_CLOCK(NULL, "gps", gps)
- _REGISTER_CLOCK("tcc-gsb.0", NULL, gsb0)
- _REGISTER_CLOCK("tcc-gsb.1", NULL, gsb1)
- _REGISTER_CLOCK("tcc-gsb.2", NULL, gsb2)
- _REGISTER_CLOCK("tcc-gsb.3", NULL, gsb3)
- _REGISTER_CLOCK(NULL, "gdma2", gdma2)
- _REGISTER_CLOCK(NULL, "gdma3", gdma3)
- _REGISTER_CLOCK(NULL, "ddrc", ddrc)
- _REGISTER_CLOCK("tcc-usbh.1", "usb", usbh1)
-};
-
-static struct clk *root_clk_by_index(enum root_clks src)
-{
- switch (src) {
- case CLK_SRC_PLL0: return &pll0;
- case CLK_SRC_PLL1: return &pll1;
- case CLK_SRC_PLL2: return &pll2;
- case CLK_SRC_PLL0DIV: return &pll0div;
- case CLK_SRC_PLL1DIV: return &pll1div;
- case CLK_SRC_PLL2DIV: return &pll2div;
- case CLK_SRC_XI: return ξ
- case CLK_SRC_XTI: return &xti;
- case CLK_SRC_XIDIV: return &xidiv;
- case CLK_SRC_XTIDIV: return &xtidiv;
- default: return NULL;
- }
-}
-
-static void find_aclk_parent(struct clk *clk)
-{
- unsigned int src;
- struct clk *clock;
-
- if (!clk->aclkreg)
- return;
-
- src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
- src &= CLK_SRC_MASK;
-
- clock = root_clk_by_index(src);
- if (!clock)
- return;
-
- clk->parent = clock;
- clk->set_parent = aclk_set_parent;
-}
-
-void __init tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq)
-{
- int i;
-
- xi_rate = xi_freq;
- xti_rate = xti_freq;
-
- /* fixup parents and add the clock */
- for (i = 0; i < ARRAY_SIZE(lookups); i++) {
- find_aclk_parent(lookups[i].clk);
- clkdev_add(&lookups[i]);
- }
- tcc8k_timer_init(&tcz, (void __iomem *)TIMER_BASE, INT_TC32);
-}
diff --git a/arch/arm/mach-tcc8k/common.h b/arch/arm/mach-tcc8k/common.h
deleted file mode 100644
index 705690a..0000000
--- a/arch/arm/mach-tcc8k/common.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef MACH_TCC8K_COMMON_H
-#define MACH_TCC8K_COMMON_H
-
-#include <linux/platform_device.h>
-
-extern struct platform_device tcc_nand_device;
-
-struct clk;
-
-extern void tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq);
-extern void tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq);
-extern void tcc8k_init_irq(void);
-extern void tcc8k_map_common_io(void);
-
-#endif
diff --git a/arch/arm/mach-tcc8k/devices.c b/arch/arm/mach-tcc8k/devices.c
deleted file mode 100644
index 6722ad7..0000000
--- a/arch/arm/mach-tcc8k/devices.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * linux/arch/arm/mach-tcc8k/devices.c
- *
- * Copyright (C) Telechips, Inc.
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of GPL v2.
- *
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/tcc8k-regs.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-static u64 tcc8k_dmamask = DMA_BIT_MASK(32);
-
-#ifdef CONFIG_MTD_NAND_TCC
-/* NAND controller */
-static struct resource tcc_nand_resources[] = {
- {
- .start = (resource_size_t)NFC_BASE,
- .end = (resource_size_t)NFC_BASE + 0x7f,
- .flags = IORESOURCE_MEM,
- }, {
- .start = INT_NFC,
- .end = INT_NFC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device tcc_nand_device = {
- .name = "tcc_nand",
- .id = 0,
- .num_resources = ARRAY_SIZE(tcc_nand_resources),
- .resource = tcc_nand_resources,
-};
-#endif
-
-#ifdef CONFIG_MMC_TCC8K
-/* MMC controller */
-static struct resource tcc8k_mmc0_resource[] = {
- {
- .start = INT_SD0,
- .end = INT_SD0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource tcc8k_mmc1_resource[] = {
- {
- .start = INT_SD1,
- .end = INT_SD1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device tcc8k_mmc0_device = {
- .name = "tcc-mmc",
- .id = 0,
- .num_resources = ARRAY_SIZE(tcc8k_mmc0_resource),
- .resource = tcc8k_mmc0_resource,
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-
-struct platform_device tcc8k_mmc1_device = {
- .name = "tcc-mmc",
- .id = 1,
- .num_resources = ARRAY_SIZE(tcc8k_mmc1_resource),
- .resource = tcc8k_mmc1_resource,
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-
-static inline void tcc8k_init_mmc(void)
-{
- u32 reg = __raw_readl(GPIOPS_BASE + GPIOPS_FS1_OFFS);
-
- reg |= GPIOPS_FS1_SDH0_BITS | GPIOPS_FS1_SDH1_BITS;
- __raw_writel(reg, GPIOPS_BASE + GPIOPS_FS1_OFFS);
-
- platform_device_register(&tcc8k_mmc0_device);
- platform_device_register(&tcc8k_mmc1_device);
-}
-#else
-static inline void tcc8k_init_mmc(void) { }
-#endif
-
-#ifdef CONFIG_USB_OHCI_HCD
-static int tcc8k_ohci_init(struct device *dev)
-{
- u32 reg;
-
- /* Use GPIO PK19 as VBUS control output */
- reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS0_OFFS);
- reg &= ~(1 << 19);
- __raw_writel(reg, GPIOPK_BASE + GPIOPK_FS0_OFFS);
- reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS1_OFFS);
- reg &= ~(1 << 19);
- __raw_writel(reg, GPIOPK_BASE + GPIOPK_FS1_OFFS);
-
- reg = __raw_readl(GPIOPK_BASE + GPIOPK_DOE_OFFS);
- reg |= (1 << 19);
- __raw_writel(reg, GPIOPK_BASE + GPIOPK_DOE_OFFS);
- /* Turn on VBUS */
- reg = __raw_readl(GPIOPK_BASE + GPIOPK_DAT_OFFS);
- reg |= (1 << 19);
- __raw_writel(reg, GPIOPK_BASE + GPIOPK_DAT_OFFS);
-
- return 0;
-}
-
-static struct resource tcc8k_ohci0_resources[] = {
- [0] = {
- .start = (resource_size_t)USBH0_BASE,
- .end = (resource_size_t)USBH0_BASE + 0x5c,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = INT_USBH0,
- .end = INT_USBH0,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource tcc8k_ohci1_resources[] = {
- [0] = {
- .start = (resource_size_t)USBH1_BASE,
- .end = (resource_size_t)USBH1_BASE + 0x5c,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = INT_USBH1,
- .end = INT_USBH1,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct tccohci_platform_data tcc8k_ohci0_platform_data = {
- .controller = 0,
- .port_mode = PMM_PERPORT_MODE,
- .init = tcc8k_ohci_init,
-};
-
-static struct tccohci_platform_data tcc8k_ohci1_platform_data = {
- .controller = 1,
- .port_mode = PMM_PERPORT_MODE,
- .init = tcc8k_ohci_init,
-};
-
-static struct platform_device ohci0_device = {
- .name = "tcc-ohci",
- .id = 0,
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &tcc8k_ohci0_platform_data,
- },
- .num_resources = ARRAY_SIZE(tcc8k_ohci0_resources),
- .resource = tcc8k_ohci0_resources,
-};
-
-static struct platform_device ohci1_device = {
- .name = "tcc-ohci",
- .id = 1,
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &tcc8k_ohci1_platform_data,
- },
- .num_resources = ARRAY_SIZE(tcc8k_ohci1_resources),
- .resource = tcc8k_ohci1_resources,
-};
-
-static void __init tcc8k_init_usbhost(void)
-{
- platform_device_register(&ohci0_device);
- platform_device_register(&ohci1_device);
-}
-#else
-static void __init tcc8k_init_usbhost(void) { }
-#endif
-
-/* USB device controller*/
-#ifdef CONFIG_USB_GADGET_TCC8K
-static struct resource udc_resources[] = {
- [0] = {
- .start = INT_USBD,
- .end = INT_USBD,
- .flags = IORESOURCE_IRQ,
- },
- [1] = {
- .start = INT_UDMA,
- .end = INT_UDMA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device tcc8k_udc_device = {
- .name = "tcc-udc",
- .id = 0,
- .resource = udc_resources,
- .num_resources = ARRAY_SIZE(udc_resources),
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static void __init tcc8k_init_usb_gadget(void)
-{
- platform_device_register(&tcc8k_udc_device);
-}
-#else
-static void __init tcc8k_init_usb_gadget(void) { }
-#endif /* CONFIG_USB_GADGET_TCC83X */
-
-static int __init tcc8k_init_devices(void)
-{
- tcc8k_init_mmc();
- tcc8k_init_usbhost();
- tcc8k_init_usb_gadget();
- return 0;
-}
-
-arch_initcall(tcc8k_init_devices);
diff --git a/arch/arm/mach-tcc8k/io.c b/arch/arm/mach-tcc8k/io.c
deleted file mode 100644
index 9b39d7f..0000000
--- a/arch/arm/mach-tcc8k/io.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * linux/arch/arm/mach-tcc8k/io.c
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * derived from TCC83xx io.c
- * Copyright (C) Telechips, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/tcc8k-regs.h>
-
-/*
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- */
-static struct map_desc tcc8k_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)CS1_BASE_VIRT,
- .pfn = __phys_to_pfn(CS1_BASE),
- .length = CS1_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)AHB_PERI_BASE_VIRT,
- .pfn = __phys_to_pfn(AHB_PERI_BASE),
- .length = AHB_PERI_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)APB0_PERI_BASE_VIRT,
- .pfn = __phys_to_pfn(APB0_PERI_BASE),
- .length = APB0_PERI_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)APB1_PERI_BASE_VIRT,
- .pfn = __phys_to_pfn(APB1_PERI_BASE),
- .length = APB1_PERI_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)EXT_MEM_CTRL_BASE_VIRT,
- .pfn = __phys_to_pfn(EXT_MEM_CTRL_BASE),
- .length = EXT_MEM_CTRL_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-/*
- * Maps common IO regions for tcc8k.
- *
- */
-void __init tcc8k_map_common_io(void)
-{
- iotable_init(tcc8k_io_desc, ARRAY_SIZE(tcc8k_io_desc));
-}
diff --git a/arch/arm/mach-tcc8k/irq.c b/arch/arm/mach-tcc8k/irq.c
deleted file mode 100644
index 209fa5c..0000000
--- a/arch/arm/mach-tcc8k/irq.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) Telechips, Inc.
- * Copyright (C) 2009-2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU GPL version 2.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <mach/tcc8k-regs.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-/* Disable IRQ */
-static void tcc8000_mask_ack_irq0(struct irq_data *d)
-{
- PIC0_IEN &= ~(1 << d->irq);
- PIC0_CREQ |= (1 << d->irq);
-}
-
-static void tcc8000_mask_ack_irq1(struct irq_data *d)
-{
- PIC1_IEN &= ~(1 << (d->irq - 32));
- PIC1_CREQ |= (1 << (d->irq - 32));
-}
-
-static void tcc8000_mask_irq0(struct irq_data *d)
-{
- PIC0_IEN &= ~(1 << d->irq);
-}
-
-static void tcc8000_mask_irq1(struct irq_data *d)
-{
- PIC1_IEN &= ~(1 << (d->irq - 32));
-}
-
-static void tcc8000_ack_irq0(struct irq_data *d)
-{
- PIC0_CREQ |= (1 << d->irq);
-}
-
-static void tcc8000_ack_irq1(struct irq_data *d)
-{
- PIC1_CREQ |= (1 << (d->irq - 32));
-}
-
-/* Enable IRQ */
-static void tcc8000_unmask_irq0(struct irq_data *d)
-{
- PIC0_IEN |= (1 << d->irq);
- PIC0_INTOEN |= (1 << d->irq);
-}
-
-static void tcc8000_unmask_irq1(struct irq_data *d)
-{
- PIC1_IEN |= (1 << (d->irq - 32));
- PIC1_INTOEN |= (1 << (d->irq - 32));
-}
-
-static struct irq_chip tcc8000_irq_chip0 = {
- .name = "tcc_irq0",
- .irq_mask = tcc8000_mask_irq0,
- .irq_ack = tcc8000_ack_irq0,
- .irq_mask_ack = tcc8000_mask_ack_irq0,
- .irq_unmask = tcc8000_unmask_irq0,
-};
-
-static struct irq_chip tcc8000_irq_chip1 = {
- .name = "tcc_irq1",
- .irq_mask = tcc8000_mask_irq1,
- .irq_ack = tcc8000_ack_irq1,
- .irq_mask_ack = tcc8000_mask_ack_irq1,
- .irq_unmask = tcc8000_unmask_irq1,
-};
-
-void __init tcc8k_init_irq(void)
-{
- int irqno;
-
- /* Mask and clear all interrupts */
- PIC0_IEN = 0x00000000;
- PIC0_CREQ = 0xffffffff;
- PIC1_IEN = 0x00000000;
- PIC1_CREQ = 0xffffffff;
-
- PIC0_MEN0 = 0x00000003;
- PIC1_MEN1 = 0x00000003;
- PIC1_MEN = 0x00000003;
-
- /* let all IRQs be level triggered */
- PIC0_TMODE = 0xffffffff;
- PIC1_TMODE = 0xffffffff;
- /* all IRQs are IRQs (not FIQs) */
- PIC0_IRQSEL = 0xffffffff;
- PIC1_IRQSEL = 0xffffffff;
-
- for (irqno = 0; irqno < NR_IRQS; irqno++) {
- if (irqno < 32)
- irq_set_chip(irqno, &tcc8000_irq_chip0);
- else
- irq_set_chip(irqno, &tcc8000_irq_chip1);
- irq_set_handler(irqno, handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-}
diff --git a/arch/arm/mach-tcc8k/time.c b/arch/arm/mach-tcc8k/time.c
deleted file mode 100644
index a96babe..0000000
--- a/arch/arm/mach-tcc8k/time.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * TCC8000 system timer setup
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL version 2.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-
-#include <asm/mach/time.h>
-
-#include <mach/tcc8k-regs.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-static void __iomem *timer_base;
-
-static int tcc_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long reg = __raw_readl(timer_base + TC32MCNT_OFFS);
-
- __raw_writel(reg + evt, timer_base + TC32CMP0_OFFS);
- return 0;
-}
-
-static void tcc_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- unsigned long tc32irq;
-
- switch (mode) {
- case CLOCK_EVT_MODE_ONESHOT:
- tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS);
- tc32irq |= TC32IRQ_IRQEN0;
- __raw_writel(tc32irq, timer_base + TC32IRQ_OFFS);
- break;
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_UNUSED:
- tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS);
- tc32irq &= ~TC32IRQ_IRQEN0;
- __raw_writel(tc32irq, timer_base + TC32IRQ_OFFS);
- break;
- case CLOCK_EVT_MODE_PERIODIC:
- case CLOCK_EVT_MODE_RESUME:
- break;
- }
-}
-
-static irqreturn_t tcc8k_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
-
- /* Acknowledge TC32 interrupt by reading TC32IRQ */
- __raw_readl(timer_base + TC32IRQ_OFFS);
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct clock_event_device clockevent_tcc = {
- .name = "tcc_timer1",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
- .set_mode = tcc_set_mode,
- .set_next_event = tcc_set_next_event,
- .rating = 200,
-};
-
-static struct irqaction tcc8k_timer_irq = {
- .name = "TC32_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER,
- .handler = tcc8k_timer_interrupt,
- .dev_id = &clockevent_tcc,
-};
-
-static int __init tcc_clockevent_init(struct clk *clock)
-{
- unsigned int c = clk_get_rate(clock);
-
- clocksource_mmio_init(timer_base + TC32MCNT_OFFS, "tcc_tc32", c,
- 200, 32, clocksource_mmio_readl_up);
-
- clockevent_tcc.mult = div_sc(c, NSEC_PER_SEC,
- clockevent_tcc.shift);
- clockevent_tcc.max_delta_ns =
- clockevent_delta2ns(0xfffffffe, &clockevent_tcc);
- clockevent_tcc.min_delta_ns =
- clockevent_delta2ns(0xff, &clockevent_tcc);
-
- clockevent_tcc.cpumask = cpumask_of(0);
-
- clockevents_register_device(&clockevent_tcc);
-
- return 0;
-}
-
-void __init tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq)
-{
- u32 reg;
-
- timer_base = base;
- tcc8k_timer_irq.irq = irq;
-
- /* Enable clocks */
- clk_enable(clock);
-
- /* Initialize 32-bit timer */
- reg = __raw_readl(timer_base + TC32EN_OFFS);
- reg &= ~TC32EN_ENABLE; /* Disable timer */
- __raw_writel(reg, timer_base + TC32EN_OFFS);
- /* Free running timer, counting from 0 to 0xffffffff */
- __raw_writel(0, timer_base + TC32EN_OFFS);
- __raw_writel(0, timer_base + TC32LDV_OFFS);
- reg = __raw_readl(timer_base + TC32IRQ_OFFS);
- reg |= TC32IRQ_IRQEN0; /* irq at match with CMP0 */
- __raw_writel(reg, timer_base + TC32IRQ_OFFS);
-
- __raw_writel(TC32EN_ENABLE, timer_base + TC32EN_OFFS);
-
- tcc_clockevent_init(clock);
- setup_irq(irq, &tcc8k_timer_irq);
-}
--
1.7.6.3
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 4/4] arm: Remove plat-tcc directory
2011-12-22 21:19 [PATCH 0/4] arm: Remove Telechips subarchitecture Hans J. Koch
` (2 preceding siblings ...)
2011-12-22 21:26 ` [PATCH 3/4] arm: Remove mach-tcc8k directory Hans J. Koch
@ 2011-12-22 21:28 ` Hans J. Koch
3 siblings, 0 replies; 13+ messages in thread
From: Hans J. Koch @ 2011-12-22 21:28 UTC (permalink / raw)
To: linux-arm-kernel
The Telechips ARM architecture is being removed. This patch
deletes the arch/arm/plat-tcc/ folder.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Harry Sievers <hsievers@csselectronic.com>
Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
---
arch/arm/plat-tcc/Kconfig | 20 -
arch/arm/plat-tcc/Makefile | 3 -
arch/arm/plat-tcc/clock.c | 179 ------
arch/arm/plat-tcc/include/mach/clock.h | 48 --
arch/arm/plat-tcc/include/mach/debug-macro.S | 32 -
arch/arm/plat-tcc/include/mach/entry-macro.S | 68 ---
arch/arm/plat-tcc/include/mach/hardware.h | 43 --
arch/arm/plat-tcc/include/mach/io.h | 23 -
arch/arm/plat-tcc/include/mach/irqs.h | 83 ---
arch/arm/plat-tcc/include/mach/system.h | 31 -
arch/arm/plat-tcc/include/mach/tcc8k-regs.h | 807 --------------------------
arch/arm/plat-tcc/include/mach/timex.h | 5 -
arch/arm/plat-tcc/include/mach/uncompress.h | 34 --
arch/arm/plat-tcc/include/mach/vmalloc.h | 10 -
arch/arm/plat-tcc/system.c | 25 -
15 files changed, 0 insertions(+), 1411 deletions(-)
delete mode 100644 arch/arm/plat-tcc/Kconfig
delete mode 100644 arch/arm/plat-tcc/Makefile
delete mode 100644 arch/arm/plat-tcc/clock.c
delete mode 100644 arch/arm/plat-tcc/include/mach/clock.h
delete mode 100644 arch/arm/plat-tcc/include/mach/debug-macro.S
delete mode 100644 arch/arm/plat-tcc/include/mach/entry-macro.S
delete mode 100644 arch/arm/plat-tcc/include/mach/hardware.h
delete mode 100644 arch/arm/plat-tcc/include/mach/io.h
delete mode 100644 arch/arm/plat-tcc/include/mach/irqs.h
delete mode 100644 arch/arm/plat-tcc/include/mach/system.h
delete mode 100644 arch/arm/plat-tcc/include/mach/tcc8k-regs.h
delete mode 100644 arch/arm/plat-tcc/include/mach/timex.h
delete mode 100644 arch/arm/plat-tcc/include/mach/uncompress.h
delete mode 100644 arch/arm/plat-tcc/include/mach/vmalloc.h
delete mode 100644 arch/arm/plat-tcc/system.c
diff --git a/arch/arm/plat-tcc/Kconfig b/arch/arm/plat-tcc/Kconfig
deleted file mode 100644
index 1bf4995..0000000
--- a/arch/arm/plat-tcc/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-if ARCH_TCC_926
-
-menu "Telechips ARM926-based CPUs"
-
-choice
- prompt "Telechips CPU type:"
- default ARCH_TCC8K
-
-config ARCH_TCC8K
- bool TCC8000
- select USB_ARCH_HAS_OHCI
- help
- Support for Telechips TCC8000 systems
-
-endchoice
-
-source "arch/arm/mach-tcc8k/Kconfig"
-
-endmenu
-endif
diff --git a/arch/arm/plat-tcc/Makefile b/arch/arm/plat-tcc/Makefile
deleted file mode 100644
index eceabc8..0000000
--- a/arch/arm/plat-tcc/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# "Telechips Platform Common Modules"
-
-obj-y := clock.o system.o
diff --git a/arch/arm/plat-tcc/clock.c b/arch/arm/plat-tcc/clock.c
deleted file mode 100644
index f3ced10..0000000
--- a/arch/arm/plat-tcc/clock.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Clock framework for Telechips SoCs
- * Based on arch/arm/plat-mxc/clock.c
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel at pengutronix.de
- * Copyright 2010 Hans J. Koch, hjk at linutronix.de
- *
- * Licensed under the terms of the GPL v2.
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/string.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-
-static DEFINE_MUTEX(clocks_mutex);
-
-/*-------------------------------------------------------------------------
- * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
-
-static void __clk_disable(struct clk *clk)
-{
- BUG_ON(clk->refcount == 0);
-
- if (!(--clk->refcount) && clk->disable) {
- /* Unconditionally disable the clock in hardware */
- clk->disable(clk);
- /* recursively disable parents */
- if (clk->parent)
- __clk_disable(clk->parent);
- }
-}
-
-static int __clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (clk->refcount++ == 0 && clk->enable) {
- if (clk->parent)
- ret = __clk_enable(clk->parent);
- if (ret)
- return ret;
- else
- return clk->enable(clk);
- }
-
- return 0;
-}
-
-/* This function increments the reference count on the clock and enables the
- * clock if not already enabled. The parent clock tree is recursively enabled
- */
-int clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (!clk)
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
- ret = __clk_enable(clk);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_enable);
-
-/* This function decrements the reference count on the clock and disables
- * the clock when reference count is 0. The parent clock tree is
- * recursively disabled
- */
-void clk_disable(struct clk *clk)
-{
- if (!clk)
- return;
-
- mutex_lock(&clocks_mutex);
- __clk_disable(clk);
- mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL_GPL(clk_disable);
-
-/* Retrieve the *current* clock rate. If the clock itself
- * does not provide a special calculation routine, ask
- * its parent and so on, until one is able to return
- * a valid clock rate
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (!clk)
- return 0UL;
-
- if (clk->get_rate)
- return clk->get_rate(clk);
-
- return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL_GPL(clk_get_rate);
-
-/* Round the requested clock rate to the nearest supported
- * rate that is less than or equal to the requested rate.
- * This is dependent on the clock's current parent.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (!clk)
- return 0;
- if (!clk->round_rate)
- return 0;
-
- return clk->round_rate(clk, rate);
-}
-EXPORT_SYMBOL_GPL(clk_round_rate);
-
-/* Set the clock to the requested clock rate. The rate must
- * match a supported rate exactly based on what clk_round_rate returns
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EINVAL;
-
- if (!clk)
- return ret;
- if (!clk->set_rate || !rate)
- return ret;
-
- mutex_lock(&clocks_mutex);
- ret = clk->set_rate(clk, rate);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-/* Set the clock's parent to another clock source */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- struct clk *old;
- int ret = -EINVAL;
-
- if (!clk)
- return ret;
- if (!clk->set_parent || !parent)
- return ret;
-
- mutex_lock(&clocks_mutex);
- old = clk->parent;
- if (clk->refcount)
- __clk_enable(parent);
- ret = clk->set_parent(clk, parent);
- if (ret)
- old = parent;
- if (clk->refcount)
- __clk_disable(old);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_parent);
-
-/* Retrieve the clock's parent clock source */
-struct clk *clk_get_parent(struct clk *clk)
-{
- if (!clk)
- return NULL;
-
- return clk->parent;
-}
-EXPORT_SYMBOL_GPL(clk_get_parent);
diff --git a/arch/arm/plat-tcc/include/mach/clock.h b/arch/arm/plat-tcc/include/mach/clock.h
deleted file mode 100644
index a12f58a..0000000
--- a/arch/arm/plat-tcc/include/mach/clock.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Low level clock header file for Telechips TCC architecture
- * (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the GPL v2.
- */
-
-#ifndef __ASM_ARCH_TCC_CLOCK_H__
-#define __ASM_ARCH_TCC_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-
-struct clk {
- struct clk *parent;
- /* id number of a root clock, 0 for normal clocks */
- int root_id;
- /* Reference count of clock enable/disable */
- int refcount;
- /* Address of associated BCLKCTRx register. Must be set. */
- void __iomem *bclkctr;
- /* Bit position for BCLKCTRx. Must be set. */
- int bclk_shift;
- /* Address of ACLKxxx register, if any. */
- void __iomem *aclkreg;
- /* get the current clock rate (always a fresh value) */
- unsigned long (*get_rate) (struct clk *);
- /* Function ptr to set the clock to a new rate. The rate must match a
- supported rate returned from round_rate. Leave blank if clock is not
- programmable */
- int (*set_rate) (struct clk *, unsigned long);
- /* Function ptr to round the requested clock rate to the nearest
- supported rate that is less than or equal to the requested rate. */
- unsigned long (*round_rate) (struct clk *, unsigned long);
- /* Function ptr to enable the clock. Leave blank if clock can not
- be gated. */
- int (*enable) (struct clk *);
- /* Function ptr to disable the clock. Leave blank if clock can not
- be gated. */
- void (*disable) (struct clk *);
- /* Function ptr to set the parent clock of the clock. */
- int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
deleted file mode 100644
index cf17d04..0000000
--- a/arch/arm/plat-tcc/include/mach/debug-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 1994-1999 Russell King
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
- .macro addruart, rp, rv, tmp
- moveq \rp, #0x90000000 @ physical base address
- movne \rv, #0xF1000000 @ virtual base
- orr \rp, \rp, #0x00007000 @ UART0
- orr \rv, \rv, #0x00007000 @ UART0
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx, #0x44]
- .endm
-
- .macro waituart,rd,rx
- .endm
-
- .macro busyuart,rd,rx
-1001:
- ldr \rd, [\rx, #0x14]
- tst \rd, #0x20
-
- beq 1001b
- .endm
diff --git a/arch/arm/plat-tcc/include/mach/entry-macro.S b/arch/arm/plat-tcc/include/mach/entry-macro.S
deleted file mode 100644
index 748f401..0000000
--- a/arch/arm/plat-tcc/include/mach/entry-macro.S
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * include/asm-arm/arch-tcc83x/entry-macro.S
- *
- * Author : <linux@telechips.com>
- * Created: June 10, 2008
- * Description: Low-level IRQ helper macros for Telechips-based platforms
- *
- * Copyright (C) 2008-2009 Telechips
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \base, =0xF2003000 @ base address of PIC registers
-
- @@ read MREQ register of PIC0
-
- mov \irqnr, #0
- ldr \irqstat, [\base, #0x00000014 ] @ lower 32 interrupts
- cmp \irqstat, #0
- bne 1001f
-
- @@ read MREQ register of PIC1
-
- ldr \irqstat, [\base, #0x00000094] @ upper 32 interrupts
- cmp \irqstat, #0
- beq 1002f
- mov \irqnr, #0x20
-
-1001:
- movs \tmp, \irqstat, lsl #16
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #16
-
- movs \tmp, \irqstat, lsl #8
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #8
-
- movs \tmp, \irqstat, lsl #4
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #4
-
- movs \tmp, \irqstat, lsl #2
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #2
-
- movs \tmp, \irqstat, lsl #1
- addeq \irqnr, \irqnr, #1
- orrs \base, \base, #1
-1002:
- @@ exit here, Z flag unset if IRQ
-
- .endm
diff --git a/arch/arm/plat-tcc/include/mach/hardware.h b/arch/arm/plat-tcc/include/mach/hardware.h
deleted file mode 100644
index e70d126..0000000
--- a/arch/arm/plat-tcc/include/mach/hardware.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- * and Dirk Behme <dirk.behme@de.bosch.com>
- * Rewritten by: <linux@telechips.com>
- * Description: Hardware definitions for TCC8300 processors and boards
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Copyright (C) 2008-2009 Telechips
- *
- * Modifications for mainline (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU Pulic License version 2.
- */
-
-#ifndef __ASM_ARCH_TCC_HARDWARE_H
-#define __ASM_ARCH_TCC_HARDWARE_H
-
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#endif
-#include <mach/io.h>
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE 0xfffece00
-#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
-
-/* DPLL control registers */
-#define DPLL_CTL 0xfffecf00
-
-#endif /* __ASM_ARCH_TCC_HARDWARE_H */
diff --git a/arch/arm/plat-tcc/include/mach/io.h b/arch/arm/plat-tcc/include/mach/io.h
deleted file mode 100644
index 3e911d3..0000000
--- a/arch/arm/plat-tcc/include/mach/io.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * IO definitions for TCC8000 processors and boards
- *
- * Copyright (C) 1997-1999 Russell King
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU Public License version 2.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/arch/arm/plat-tcc/include/mach/irqs.h b/arch/arm/plat-tcc/include/mach/irqs.h
deleted file mode 100644
index da86389..0000000
--- a/arch/arm/plat-tcc/include/mach/irqs.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * IRQ definitions for TCC8xxx
- *
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#ifndef __ASM_ARCH_TCC_IRQS_H
-#define __ASM_ARCH_TCC_IRQS_H
-
-#define NR_IRQS 64
-
-/* PIC0 interrupts */
-#define INT_ADMA1 0
-#define INT_BDMA 1
-#define INT_ADMA0 2
-#define INT_GDMA1 3
-#define INT_I2S0RX 4
-#define INT_I2S0TX 5
-#define INT_TC 6
-#define INT_UART0 7
-#define INT_USBD 8
-#define INT_SPI0TX 9
-#define INT_UDMA 10
-#define INT_LIRQ 11
-#define INT_GDMA2 12
-#define INT_GDMA0 13
-#define INT_TC32 14
-#define INT_LCD 15
-#define INT_ADC 16
-#define INT_I2C 17
-#define INT_RTCP 18
-#define INT_RTCA 19
-#define INT_NFC 20
-#define INT_SD0 21
-#define INT_GSB0 22
-#define INT_PK 23
-#define INT_USBH0 24
-#define INT_USBH1 25
-#define INT_G2D 26
-#define INT_ECC 27
-#define INT_SPI0RX 28
-#define INT_UART1 29
-#define INT_MSCL 30
-#define INT_GSB1 31
-/* PIC1 interrupts */
-#define INT_E0 32
-#define INT_E1 33
-#define INT_E2 34
-#define INT_E3 35
-#define INT_E4 36
-#define INT_E5 37
-#define INT_E6 38
-#define INT_E7 39
-#define INT_UART2 40
-#define INT_UART3 41
-#define INT_SPI1TX 42
-#define INT_SPI1RX 43
-#define INT_GSB2 44
-#define INT_SPDIF 45
-#define INT_CDIF 46
-#define INT_VBON 47
-#define INT_VBOFF 48
-#define INT_SD1 49
-#define INT_UART4 50
-#define INT_GDMA3 51
-#define INT_I2S1RX 52
-#define INT_I2S1TX 53
-#define INT_CAN0 54
-#define INT_CAN1 55
-#define INT_GSB3 56
-#define INT_KRST 57
-#define INT_UNUSED 58
-#define INT_SD0D3 59
-#define INT_SD1D3 60
-#define INT_GPS0 61
-#define INT_GPS1 62
-#define INT_GPS2 63
-
-#endif /* ASM_ARCH_TCC_IRQS_H */
diff --git a/arch/arm/plat-tcc/include/mach/system.h b/arch/arm/plat-tcc/include/mach/system.h
deleted file mode 100644
index 909e603..0000000
--- a/arch/arm/plat-tcc/include/mach/system.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Author: <linux@telechips.com>
- * Created: June 10, 2008
- * Description: LINUX SYSTEM FUNCTIONS for TCC83x
- *
- * Copyright (C) 2008-2009 Telechips
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <linux/clk.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-extern void plat_tcc_reboot(void);
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- plat_tcc_reboot();
-}
-
-#endif
diff --git a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
deleted file mode 100644
index 1d94282..0000000
--- a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
+++ /dev/null
@@ -1,807 +0,0 @@
-/*
- * Telechips TCC8000 register definitions
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPLv2.
- */
-
-#ifndef TCC8K_REGS_H
-#define TCC8K_REGS_H
-
-#include <linux/types.h>
-
-#define EXT_SDRAM_BASE 0x20000000
-#define INT_SRAM_BASE 0x30000000
-#define INT_SRAM_SIZE SZ_32K
-#define CS0_BASE 0x40000000
-#define CS1_BASE 0x50000000
-#define CS1_SIZE SZ_64K
-#define CS2_BASE 0x60000000
-#define CS3_BASE 0x70000000
-#define AHB_PERI_BASE 0x80000000
-#define AHB_PERI_SIZE SZ_64K
-#define APB0_PERI_BASE 0x90000000
-#define APB0_PERI_SIZE SZ_128K
-#define APB1_PERI_BASE 0x98000000
-#define APB1_PERI_SIZE SZ_128K
-#define DATA_TCM_BASE 0xa0000000
-#define DATA_TCM_SIZE SZ_8K
-#define EXT_MEM_CTRL_BASE 0xf0000000
-#define EXT_MEM_CTRL_SIZE SZ_4K
-
-#define CS1_BASE_VIRT (void __iomem *)0xf7000000
-#define AHB_PERI_BASE_VIRT (void __iomem *)0xf4000000
-#define APB0_PERI_BASE_VIRT (void __iomem *)0xf1000000
-#define APB1_PERI_BASE_VIRT (void __iomem *)0xf2000000
-#define EXT_MEM_CTRL_BASE_VIRT (void __iomem *)0xf3000000
-#define INT_SRAM_BASE_VIRT (void __iomem *)0xf5000000
-#define DATA_TCM_BASE_VIRT (void __iomem *)0xf6000000
-
-#define __REG(x) (*((volatile u32 *)(x)))
-
-/* USB Device Controller Registers */
-#define UDC_BASE (AHB_PERI_BASE_VIRT + 0x8000)
-#define UDC_BASE_PHYS (AHB_PERI_BASE + 0x8000)
-
-#define UDC_IR_OFFS 0x00
-#define UDC_EIR_OFFS 0x04
-#define UDC_EIER_OFFS 0x08
-#define UDC_FAR_OFFS 0x0c
-#define UDC_FNR_OFFS 0x10
-#define UDC_EDR_OFFS 0x14
-#define UDC_RT_OFFS 0x18
-#define UDC_SSR_OFFS 0x1c
-#define UDC_SCR_OFFS 0x20
-#define UDC_EP0SR_OFFS 0x24
-#define UDC_EP0CR_OFFS 0x28
-
-#define UDC_ESR_OFFS 0x2c
-#define UDC_ECR_OFFS 0x30
-#define UDC_BRCR_OFFS 0x34
-#define UDC_BWCR_OFFS 0x38
-#define UDC_MPR_OFFS 0x3c
-#define UDC_DCR_OFFS 0x40
-#define UDC_DTCR_OFFS 0x44
-#define UDC_DFCR_OFFS 0x48
-#define UDC_DTTCR1_OFFS 0x4c
-#define UDC_DTTCR2_OFFS 0x50
-#define UDC_ESR2_OFFS 0x54
-
-#define UDC_SCR2_OFFS 0x58
-#define UDC_EP0BUF_OFFS 0x60
-#define UDC_EP1BUF_OFFS 0x64
-#define UDC_EP2BUF_OFFS 0x68
-#define UDC_EP3BUF_OFFS 0x6c
-#define UDC_PLICR_OFFS 0xa0
-#define UDC_PCR_OFFS 0xa4
-
-#define UDC_UPCR0_OFFS 0xc8
-#define UDC_UPCR1_OFFS 0xcc
-#define UDC_UPCR2_OFFS 0xd0
-#define UDC_UPCR3_OFFS 0xd4
-
-/* Bits in UDC_EIR */
-#define UDC_EIR_EP0I (1 << 0)
-#define UDC_EIR_EP1I (1 << 1)
-#define UDC_EIR_EP2I (1 << 2)
-#define UDC_EIR_EP3I (1 << 3)
-#define UDC_EIR_EPI_MASK 0x0f
-
-/* Bits in UDC_EIER */
-#define UDC_EIER_EP0IE (1 << 0)
-#define UDC_EIER_EP1IE (1 << 1)
-#define UDC_EIER_EP2IE (1 << 2)
-#define UDC_EIER_EP3IE (1 << 3)
-
-/* Bits in UDC_FNR */
-#define UDC_FNR_FN_MASK 0x7ff
-#define UDC_FNR_SM (1 << 13)
-#define UDC_FNR_FTL (1 << 14)
-
-/* Bits in UDC_SSR */
-#define UDC_SSR_HFRES (1 << 0)
-#define UDC_SSR_HFSUSP (1 << 1)
-#define UDC_SSR_HFRM (1 << 2)
-#define UDC_SSR_SDE (1 << 3)
-#define UDC_SSR_HSP (1 << 4)
-#define UDC_SSR_DM (1 << 5)
-#define UDC_SSR_DP (1 << 6)
-#define UDC_SSR_TBM (1 << 7)
-#define UDC_SSR_VBON (1 << 8)
-#define UDC_SSR_VBOFF (1 << 9)
-#define UDC_SSR_EOERR (1 << 10)
-#define UDC_SSR_DCERR (1 << 11)
-#define UDC_SSR_TCERR (1 << 12)
-#define UDC_SSR_BSERR (1 << 13)
-#define UDC_SSR_TMERR (1 << 14)
-#define UDC_SSR_BAERR (1 << 15)
-
-/* Bits in UDC_SCR */
-#define UDC_SCR_HRESE (1 << 0)
-#define UDC_SCR_HSSPE (1 << 1)
-#define UDC_SCR_RRDE (1 << 5)
-#define UDC_SCR_SPDEN (1 << 6)
-#define UDC_SCR_DIEN (1 << 12)
-
-/* Bits in UDC_EP0SR */
-#define UDC_EP0SR_RSR (1 << 0)
-#define UDC_EP0SR_TST (1 << 1)
-#define UDC_EP0SR_SHT (1 << 4)
-#define UDC_EP0SR_LWO (1 << 6)
-
-/* Bits in UDC_EP0CR */
-#define UDC_EP0CR_ESS (1 << 1)
-
-/* Bits in UDC_ESR */
-#define UDC_ESR_RPS (1 << 0)
-#define UDC_ESR_TPS (1 << 1)
-#define UDC_ESR_LWO (1 << 4)
-#define UDC_ESR_FFS (1 << 6)
-
-/* Bits in UDC_ECR */
-#define UDC_ECR_ESS (1 << 1)
-#define UDC_ECR_CDP (1 << 2)
-
-#define UDC_ECR_FLUSH (1 << 6)
-#define UDC_ECR_DUEN (1 << 7)
-
-/* Bits in UDC_UPCR0 */
-#define UDC_UPCR0_VBD (1 << 1)
-#define UDC_UPCR0_VBDS (1 << 6)
-#define UDC_UPCR0_RCD_12 (0x0 << 9)
-#define UDC_UPCR0_RCD_24 (0x1 << 9)
-#define UDC_UPCR0_RCD_48 (0x2 << 9)
-#define UDC_UPCR0_RCS_EXT (0x1 << 11)
-#define UDC_UPCR0_RCS_XTAL (0x0 << 11)
-
-/* Bits in UDC_UPCR1 */
-#define UDC_UPCR1_CDT(x) ((x) << 0)
-#define UDC_UPCR1_OTGT(x) ((x) << 3)
-#define UDC_UPCR1_SQRXT(x) ((x) << 8)
-#define UDC_UPCR1_TXFSLST(x) ((x) << 12)
-
-/* Bits in UDC_UPCR2 */
-#define UDC_UPCR2_TP (1 << 0)
-#define UDC_UPCR2_TXRT(x) ((x) << 2)
-#define UDC_UPCR2_TXVRT(x) ((x) << 5)
-#define UDC_UPCR2_OPMODE(x) ((x) << 9)
-#define UDC_UPCR2_XCVRSEL(x) ((x) << 12)
-#define UDC_UPCR2_TM (1 << 14)
-
-/* USB Host Controller registers */
-#define USBH0_BASE (AHB_PERI_BASE_VIRT + 0xb000)
-#define USBH1_BASE (AHB_PERI_BASE_VIRT + 0xb800)
-
-#define OHCI_INT_ENABLE_OFFS 0x10
-
-#define RH_DESCRIPTOR_A_OFFS 0x48
-#define RH_DESCRIPTOR_B_OFFS 0x4c
-
-#define USBHTCFG0_OFFS 0x100
-#define USBHHCFG0_OFFS 0x104
-#define USBHHCFG1_OFFS 0x104
-
-/* DMA controller registers */
-#define DMAC0_BASE (AHB_PERI_BASE + 0x4000)
-#define DMAC1_BASE (AHB_PERI_BASE + 0xa000)
-#define DMAC2_BASE (AHB_PERI_BASE + 0x4800)
-#define DMAC3_BASE (AHB_PERI_BASE + 0xa800)
-
-#define DMAC_CH_OFFSET(ch) (ch * 0x30)
-
-#define ST_SADR_OFFS 0x00
-#define SPARAM_OFFS 0x04
-#define C_SADR_OFFS 0x0c
-#define ST_DADR_OFFS 0x10
-#define DPARAM_OFFS 0x14
-#define C_DADR_OFFS 0x1c
-#define HCOUNT_OFFS 0x20
-#define CHCTRL_OFFS 0x24
-#define RPTCTRL_OFFS 0x28
-#define EXTREQ_A_OFFS 0x2c
-
-/* Bits in CHCTRL register */
-#define CHCTRL_EN (1 << 0)
-
-#define CHCTRL_IEN (1 << 2)
-#define CHCTRL_FLAG (1 << 3)
-#define CHCTRL_WSIZE8 (0 << 4)
-#define CHCTRL_WSIZE16 (1 << 4)
-#define CHCTRL_WSIZE32 (2 << 4)
-
-#define CHCTRL_BSIZE1 (0 << 6)
-#define CHCTRL_BSIZE2 (1 << 6)
-#define CHCTRL_BSIZE4 (2 << 6)
-#define CHCTRL_BSIZE8 (3 << 6)
-
-#define CHCTRL_TYPE_SINGLE_E (0 << 8)
-#define CHCTRL_TYPE_HW (1 << 8)
-#define CHCTRL_TYPE_SW (2 << 8)
-#define CHCTRL_TYPE_SINGLE_L (3 << 8)
-
-#define CHCTRL_BST (1 << 10)
-
-/* Use DMA controller 0, channel 2 for USB */
-#define USB_DMA_BASE (DMAC0_BASE + DMAC_CH_OFFSET(2))
-
-/* NAND flash controller registers */
-#define NFC_BASE (AHB_PERI_BASE_VIRT + 0xd000)
-#define NFC_BASE_PHYS (AHB_PERI_BASE + 0xd000)
-
-#define NFC_CMD_OFFS 0x00
-#define NFC_LADDR_OFFS 0x04
-#define NFC_BADDR_OFFS 0x08
-#define NFC_SADDR_OFFS 0x0c
-#define NFC_WDATA_OFFS 0x10
-#define NFC_LDATA_OFFS 0x20
-#define NFC_SDATA_OFFS 0x40
-#define NFC_CTRL_OFFS 0x50
-#define NFC_PSTART_OFFS 0x54
-#define NFC_RSTART_OFFS 0x58
-#define NFC_DSIZE_OFFS 0x5c
-#define NFC_IREQ_OFFS 0x60
-#define NFC_RST_OFFS 0x64
-#define NFC_CTRL1_OFFS 0x68
-#define NFC_MDATA_OFFS 0x70
-
-#define NFC_WDATA_PHYS_ADDR (NFC_BASE_PHYS + NFC_WDATA_OFFS)
-
-/* Bits in NFC_CTRL */
-#define NFC_CTRL_BHLD_MASK (0xf << 0)
-#define NFC_CTRL_BPW_MASK (0xf << 4)
-#define NFC_CTRL_BSTP_MASK (0xf << 8)
-#define NFC_CTRL_CADDR_MASK (0x7 << 12)
-#define NFC_CTRL_CADDR_1 (0x0 << 12)
-#define NFC_CTRL_CADDR_2 (0x1 << 12)
-#define NFC_CTRL_CADDR_3 (0x2 << 12)
-#define NFC_CTRL_CADDR_4 (0x3 << 12)
-#define NFC_CTRL_CADDR_5 (0x4 << 12)
-#define NFC_CTRL_MSK (1 << 15)
-#define NFC_CTRL_PSIZE256 (0 << 16)
-#define NFC_CTRL_PSIZE512 (1 << 16)
-#define NFC_CTRL_PSIZE1024 (2 << 16)
-#define NFC_CTRL_PSIZE2048 (3 << 16)
-#define NFC_CTRL_PSIZE4096 (4 << 16)
-#define NFC_CTRL_PSIZE_MASK (7 << 16)
-#define NFC_CTRL_BSIZE1 (0 << 19)
-#define NFC_CTRL_BSIZE2 (1 << 19)
-#define NFC_CTRL_BSIZE4 (2 << 19)
-#define NFC_CTRL_BSIZE8 (3 << 19)
-#define NFC_CTRL_BSIZE_MASK (3 << 19)
-#define NFC_CTRL_RDY (1 << 21)
-#define NFC_CTRL_CS0SEL (1 << 22)
-#define NFC_CTRL_CS1SEL (1 << 23)
-#define NFC_CTRL_CS2SEL (1 << 24)
-#define NFC_CTRL_CS3SEL (1 << 25)
-#define NFC_CTRL_CSMASK (0xf << 22)
-#define NFC_CTRL_BW (1 << 26)
-#define NFC_CTRL_FS (1 << 27)
-#define NFC_CTRL_DEN (1 << 28)
-#define NFC_CTRL_READ_IEN (1 << 29)
-#define NFC_CTRL_PROG_IEN (1 << 30)
-#define NFC_CTRL_RDY_IEN (1 << 31)
-
-/* Bits in NFC_IREQ */
-#define NFC_IREQ_IRQ0 (1 << 0)
-#define NFC_IREQ_IRQ1 (1 << 1)
-#define NFC_IREQ_IRQ2 (1 << 2)
-
-#define NFC_IREQ_FLAG0 (1 << 4)
-#define NFC_IREQ_FLAG1 (1 << 5)
-#define NFC_IREQ_FLAG2 (1 << 6)
-
-/* MMC controller registers */
-#define MMC0_BASE (AHB_PERI_BASE_VIRT + 0xe000)
-#define MMC1_BASE (AHB_PERI_BASE_VIRT + 0xe800)
-
-/* UART base addresses */
-
-#define UART0_BASE (APB0_PERI_BASE_VIRT + 0x07000)
-#define UART0_BASE_PHYS (APB0_PERI_BASE + 0x07000)
-#define UART1_BASE (APB0_PERI_BASE_VIRT + 0x08000)
-#define UART1_BASE_PHYS (APB0_PERI_BASE + 0x08000)
-#define UART2_BASE (APB0_PERI_BASE_VIRT + 0x09000)
-#define UART2_BASE_PHYS (APB0_PERI_BASE + 0x09000)
-#define UART3_BASE (APB0_PERI_BASE_VIRT + 0x0a000)
-#define UART3_BASE_PHYS (APB0_PERI_BASE + 0x0a000)
-#define UART4_BASE (APB0_PERI_BASE_VIRT + 0x15000)
-#define UART4_BASE_PHYS (APB0_PERI_BASE + 0x15000)
-
-#define UART_BASE UART0_BASE
-#define UART_BASE_PHYS UART0_BASE_PHYS
-
-/* ECC controller */
-#define ECC_CTR_BASE (APB0_PERI_BASE_VIRT + 0xd000)
-
-#define ECC_CTRL_OFFS 0x00
-#define ECC_BASE_OFFS 0x04
-#define ECC_MASK_OFFS 0x08
-#define ECC_CLEAR_OFFS 0x0c
-#define ECC4_0_OFFS 0x10
-#define ECC4_1_OFFS 0x14
-
-#define ECC_EADDR0_OFFS 0x50
-
-#define ECC_ERRNUM_OFFS 0x90
-#define ECC_IREQ_OFFS 0x94
-
-/* Bits in ECC_CTRL */
-#define ECC_CTRL_ECC4_DIEN (1 << 28)
-#define ECC_CTRL_ECC8_DIEN (1 << 29)
-#define ECC_CTRL_ECC12_DIEN (1 << 30)
-#define ECC_CTRL_ECC_DISABLE 0x0
-#define ECC_CTRL_ECC_SLC_ENC 0x8
-#define ECC_CTRL_ECC_SLC_DEC 0x9
-#define ECC_CTRL_ECC4_ENC 0xa
-#define ECC_CTRL_ECC4_DEC 0xb
-#define ECC_CTRL_ECC8_ENC 0xc
-#define ECC_CTRL_ECC8_DEC 0xd
-#define ECC_CTRL_ECC12_ENC 0xe
-#define ECC_CTRL_ECC12_DEC 0xf
-
-/* Bits in ECC_IREQ */
-#define ECC_IREQ_E4DI (1 << 4)
-
-#define ECC_IREQ_E4DF (1 << 20)
-#define ECC_IREQ_E4EF (1 << 21)
-
-/* Interrupt controller */
-
-#define PIC0_BASE (APB1_PERI_BASE_VIRT + 0x3000)
-#define PIC0_BASE_PHYS (APB1_PERI_BASE + 0x3000)
-
-#define PIC0_IEN_OFFS 0x00
-#define PIC0_CREQ_OFFS 0x04
-#define PIC0_IREQ_OFFS 0x08
-#define PIC0_IRQSEL_OFFS 0x0c
-#define PIC0_SRC_OFFS 0x10
-#define PIC0_MREQ_OFFS 0x14
-#define PIC0_TSTREQ_OFFS 0x18
-#define PIC0_POL_OFFS 0x1c
-#define PIC0_IRQ_OFFS 0x20
-#define PIC0_FIQ_OFFS 0x24
-#define PIC0_MIRQ_OFFS 0x28
-#define PIC0_MFIQ_OFFS 0x2c
-#define PIC0_TMODE_OFFS 0x30
-#define PIC0_SYNC_OFFS 0x34
-#define PIC0_WKUP_OFFS 0x38
-#define PIC0_TMODEA_OFFS 0x3c
-#define PIC0_INTOEN_OFFS 0x40
-#define PIC0_MEN0_OFFS 0x44
-#define PIC0_MEN_OFFS 0x48
-
-#define PIC0_IEN __REG(PIC0_BASE + PIC0_IEN_OFFS)
-#define PIC0_IEN_PHYS __REG(PIC0_BASE_PHYS + PIC0_IEN_OFFS)
-#define PIC0_CREQ __REG(PIC0_BASE + PIC0_CREQ_OFFS)
-#define PIC0_CREQ_PHYS __REG(PIC0_BASE_PHYS + PIC0_CREQ_OFFS)
-#define PIC0_IREQ __REG(PIC0_BASE + PIC0_IREQ_OFFS)
-#define PIC0_IRQSEL __REG(PIC0_BASE + PIC0_IRQSEL_OFFS)
-#define PIC0_IRQSEL_PHYS __REG(PIC0_BASE_PHYS + PIC0_IRQSEL_OFFS)
-#define PIC0_SRC __REG(PIC0_BASE + PIC0_SRC_OFFS)
-#define PIC0_MREQ __REG(PIC0_BASE + PIC0_MREQ_OFFS)
-#define PIC0_TSTREQ __REG(PIC0_BASE + PIC0_TSTREQ_OFFS)
-#define PIC0_POL __REG(PIC0_BASE + PIC0_POL_OFFS)
-#define PIC0_IRQ __REG(PIC0_BASE + PIC0_IRQ_OFFS)
-#define PIC0_FIQ __REG(PIC0_BASE + PIC0_FIQ_OFFS)
-#define PIC0_MIRQ __REG(PIC0_BASE + PIC0_MIRQ_OFFS)
-#define PIC0_MFIQ __REG(PIC0_BASE + PIC0_MFIQ_OFFS)
-#define PIC0_TMODE __REG(PIC0_BASE + PIC0_TMODE_OFFS)
-#define PIC0_TMODE_PHYS __REG(PIC0_BASE_PHYS + PIC0_TMODE_OFFS)
-#define PIC0_SYNC __REG(PIC0_BASE + PIC0_SYNC_OFFS)
-#define PIC0_WKUP __REG(PIC0_BASE + PIC0_WKUP_OFFS)
-#define PIC0_TMODEA __REG(PIC0_BASE + PIC0_TMODEA_OFFS)
-#define PIC0_INTOEN __REG(PIC0_BASE + PIC0_INTOEN_OFFS)
-#define PIC0_MEN0 __REG(PIC0_BASE + PIC0_MEN0_OFFS)
-#define PIC0_MEN __REG(PIC0_BASE + PIC0_MEN_OFFS)
-
-#define PIC1_BASE (APB1_PERI_BASE_VIRT + 0x3080)
-
-#define PIC1_IEN_OFFS 0x00
-#define PIC1_CREQ_OFFS 0x04
-#define PIC1_IREQ_OFFS 0x08
-#define PIC1_IRQSEL_OFFS 0x0c
-#define PIC1_SRC_OFFS 0x10
-#define PIC1_MREQ_OFFS 0x14
-#define PIC1_TSTREQ_OFFS 0x18
-#define PIC1_POL_OFFS 0x1c
-#define PIC1_IRQ_OFFS 0x20
-#define PIC1_FIQ_OFFS 0x24
-#define PIC1_MIRQ_OFFS 0x28
-#define PIC1_MFIQ_OFFS 0x2c
-#define PIC1_TMODE_OFFS 0x30
-#define PIC1_SYNC_OFFS 0x34
-#define PIC1_WKUP_OFFS 0x38
-#define PIC1_TMODEA_OFFS 0x3c
-#define PIC1_INTOEN_OFFS 0x40
-#define PIC1_MEN1_OFFS 0x44
-#define PIC1_MEN_OFFS 0x48
-
-#define PIC1_IEN __REG(PIC1_BASE + PIC1_IEN_OFFS)
-#define PIC1_CREQ __REG(PIC1_BASE + PIC1_CREQ_OFFS)
-#define PIC1_IREQ __REG(PIC1_BASE + PIC1_IREQ_OFFS)
-#define PIC1_IRQSEL __REG(PIC1_BASE + PIC1_IRQSEL_OFFS)
-#define PIC1_SRC __REG(PIC1_BASE + PIC1_SRC_OFFS)
-#define PIC1_MREQ __REG(PIC1_BASE + PIC1_MREQ_OFFS)
-#define PIC1_TSTREQ __REG(PIC1_BASE + PIC1_TSTREQ_OFFS)
-#define PIC1_POL __REG(PIC1_BASE + PIC1_POL_OFFS)
-#define PIC1_IRQ __REG(PIC1_BASE + PIC1_IRQ_OFFS)
-#define PIC1_FIQ __REG(PIC1_BASE + PIC1_FIQ_OFFS)
-#define PIC1_MIRQ __REG(PIC1_BASE + PIC1_MIRQ_OFFS)
-#define PIC1_MFIQ __REG(PIC1_BASE + PIC1_MFIQ_OFFS)
-#define PIC1_TMODE __REG(PIC1_BASE + PIC1_TMODE_OFFS)
-#define PIC1_SYNC __REG(PIC1_BASE + PIC1_SYNC_OFFS)
-#define PIC1_WKUP __REG(PIC1_BASE + PIC1_WKUP_OFFS)
-#define PIC1_TMODEA __REG(PIC1_BASE + PIC1_TMODEA_OFFS)
-#define PIC1_INTOEN __REG(PIC1_BASE + PIC1_INTOEN_OFFS)
-#define PIC1_MEN1 __REG(PIC1_BASE + PIC1_MEN1_OFFS)
-#define PIC1_MEN __REG(PIC1_BASE + PIC1_MEN_OFFS)
-
-/* Timer registers */
-#define TIMER_BASE (APB1_PERI_BASE_VIRT + 0x4000)
-#define TIMER_BASE_PHYS (APB1_PERI_BASE + 0x4000)
-
-#define TWDCFG_OFFS 0x70
-
-#define TC32EN_OFFS 0x80
-#define TC32LDV_OFFS 0x84
-#define TC32CMP0_OFFS 0x88
-#define TC32CMP1_OFFS 0x8c
-#define TC32PCNT_OFFS 0x90
-#define TC32MCNT_OFFS 0x94
-#define TC32IRQ_OFFS 0x98
-
-/* Bits in TC32EN */
-#define TC32EN_PRESCALE_MASK 0x00ffffff
-#define TC32EN_ENABLE (1 << 24)
-#define TC32EN_LOADZERO (1 << 25)
-#define TC32EN_STOPMODE (1 << 26)
-#define TC32EN_LDM0 (1 << 28)
-#define TC32EN_LDM1 (1 << 29)
-
-/* Bits in TC32IRQ */
-#define TC32IRQ_MSTAT_MASK 0x0000001f
-#define TC32IRQ_RSTAT_MASK (0x1f << 8)
-#define TC32IRQ_IRQEN0 (1 << 16)
-#define TC32IRQ_IRQEN1 (1 << 17)
-#define TC32IRQ_IRQEN2 (1 << 18)
-#define TC32IRQ_IRQEN3 (1 << 19)
-#define TC32IRQ_IRQEN4 (1 << 20)
-#define TC32IRQ_RSYNC (1 << 30)
-#define TC32IRQ_IRQCLR (1 << 31)
-
-/* GPIO registers */
-#define GPIOPD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPD_DAT_OFFS 0x00
-#define GPIOPD_DOE_OFFS 0x04
-#define GPIOPD_FS0_OFFS 0x08
-#define GPIOPD_FS1_OFFS 0x0c
-#define GPIOPD_FS2_OFFS 0x10
-#define GPIOPD_RPU_OFFS 0x30
-#define GPIOPD_RPD_OFFS 0x34
-#define GPIOPD_DV0_OFFS 0x38
-#define GPIOPD_DV1_OFFS 0x3c
-
-#define GPIOPS_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPS_DAT_OFFS 0x40
-#define GPIOPS_DOE_OFFS 0x44
-#define GPIOPS_FS0_OFFS 0x48
-#define GPIOPS_FS1_OFFS 0x4c
-#define GPIOPS_FS2_OFFS 0x50
-#define GPIOPS_FS3_OFFS 0x54
-#define GPIOPS_RPU_OFFS 0x70
-#define GPIOPS_RPD_OFFS 0x74
-#define GPIOPS_DV0_OFFS 0x78
-#define GPIOPS_DV1_OFFS 0x7c
-
-#define GPIOPS_FS1_SDH0_BITS 0x000000ff
-#define GPIOPS_FS1_SDH1_BITS 0x0000ff00
-
-#define GPIOPU_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPU_DAT_OFFS 0x80
-#define GPIOPU_DOE_OFFS 0x84
-#define GPIOPU_FS0_OFFS 0x88
-#define GPIOPU_FS1_OFFS 0x8c
-#define GPIOPU_FS2_OFFS 0x90
-#define GPIOPU_RPU_OFFS 0xb0
-#define GPIOPU_RPD_OFFS 0xb4
-#define GPIOPU_DV0_OFFS 0xb8
-#define GPIOPU_DV1_OFFS 0xbc
-
-#define GPIOPU_FS0_TXD0 (1 << 0)
-#define GPIOPU_FS0_RXD0 (1 << 1)
-#define GPIOPU_FS0_CTS0 (1 << 2)
-#define GPIOPU_FS0_RTS0 (1 << 3)
-#define GPIOPU_FS0_TXD1 (1 << 4)
-#define GPIOPU_FS0_RXD1 (1 << 5)
-#define GPIOPU_FS0_CTS1 (1 << 6)
-#define GPIOPU_FS0_RTS1 (1 << 7)
-#define GPIOPU_FS0_TXD2 (1 << 8)
-#define GPIOPU_FS0_RXD2 (1 << 9)
-#define GPIOPU_FS0_CTS2 (1 << 10)
-#define GPIOPU_FS0_RTS2 (1 << 11)
-#define GPIOPU_FS0_TXD3 (1 << 12)
-#define GPIOPU_FS0_RXD3 (1 << 13)
-#define GPIOPU_FS0_CTS3 (1 << 14)
-#define GPIOPU_FS0_RTS3 (1 << 15)
-#define GPIOPU_FS0_TXD4 (1 << 16)
-#define GPIOPU_FS0_RXD4 (1 << 17)
-#define GPIOPU_FS0_CTS4 (1 << 18)
-#define GPIOPU_FS0_RTS4 (1 << 19)
-
-#define GPIOFC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOFC_DAT_OFFS 0xc0
-#define GPIOFC_DOE_OFFS 0xc4
-#define GPIOFC_FS0_OFFS 0xc8
-#define GPIOFC_FS1_OFFS 0xcc
-#define GPIOFC_FS2_OFFS 0xd0
-#define GPIOFC_FS3_OFFS 0xd4
-#define GPIOFC_RPU_OFFS 0xf0
-#define GPIOFC_RPD_OFFS 0xf4
-#define GPIOFC_DV0_OFFS 0xf8
-#define GPIOFC_DV1_OFFS 0xfc
-
-#define GPIOFD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOFD_DAT_OFFS 0x100
-#define GPIOFD_DOE_OFFS 0x104
-#define GPIOFD_FS0_OFFS 0x108
-#define GPIOFD_FS1_OFFS 0x10c
-#define GPIOFD_FS2_OFFS 0x110
-#define GPIOFD_RPU_OFFS 0x130
-#define GPIOFD_RPD_OFFS 0x134
-#define GPIOFD_DV0_OFFS 0x138
-#define GPIOFD_DV1_OFFS 0x13c
-
-#define GPIOLC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOLC_DAT_OFFS 0x140
-#define GPIOLC_DOE_OFFS 0x144
-#define GPIOLC_FS0_OFFS 0x148
-#define GPIOLC_FS1_OFFS 0x14c
-#define GPIOLC_RPU_OFFS 0x170
-#define GPIOLC_RPD_OFFS 0x174
-#define GPIOLC_DV0_OFFS 0x178
-#define GPIOLC_DV1_OFFS 0x17c
-
-#define GPIOLD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOLD_DAT_OFFS 0x180
-#define GPIOLD_DOE_OFFS 0x184
-#define GPIOLD_FS0_OFFS 0x188
-#define GPIOLD_FS1_OFFS 0x18c
-#define GPIOLD_FS2_OFFS 0x190
-#define GPIOLD_RPU_OFFS 0x1b0
-#define GPIOLD_RPD_OFFS 0x1b4
-#define GPIOLD_DV0_OFFS 0x1b8
-#define GPIOLD_DV1_OFFS 0x1bc
-
-#define GPIOAD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOAD_DAT_OFFS 0x1c0
-#define GPIOAD_DOE_OFFS 0x1c4
-#define GPIOAD_FS0_OFFS 0x1c8
-#define GPIOAD_RPU_OFFS 0x1f0
-#define GPIOAD_RPD_OFFS 0x1f4
-#define GPIOAD_DV0_OFFS 0x1f8
-#define GPIOAD_DV1_OFFS 0x1fc
-
-#define GPIOXC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOXC_DAT_OFFS 0x200
-#define GPIOXC_DOE_OFFS 0x204
-#define GPIOXC_FS0_OFFS 0x208
-#define GPIOXC_RPU_OFFS 0x230
-#define GPIOXC_RPD_OFFS 0x234
-#define GPIOXC_DV0_OFFS 0x238
-#define GPIOXC_DV1_OFFS 0x23c
-
-#define GPIOXC_FS0 __REG(GPIOXC_BASE + GPIOXC_FS0_OFFS)
-
-#define GPIOXC_FS0_CS0 (1 << 26)
-#define GPIOXC_FS0_CS1 (1 << 27)
-
-#define GPIOXD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOXD_DAT_OFFS 0x240
-#define GPIOXD_FS0_OFFS 0x248
-#define GPIOXD_RPU_OFFS 0x270
-#define GPIOXD_RPD_OFFS 0x274
-#define GPIOXD_DV0_OFFS 0x278
-#define GPIOXD_DV1_OFFS 0x27c
-
-#define GPIOPK_BASE (APB1_PERI_BASE_VIRT + 0x1c000)
-
-#define GPIOPK_RST_OFFS 0x008
-#define GPIOPK_DAT_OFFS 0x100
-#define GPIOPK_DOE_OFFS 0x104
-#define GPIOPK_FS0_OFFS 0x108
-#define GPIOPK_FS1_OFFS 0x10c
-#define GPIOPK_FS2_OFFS 0x110
-#define GPIOPK_IRQST_OFFS 0x210
-#define GPIOPK_IRQEN_OFFS 0x214
-#define GPIOPK_IRQPOL_OFFS 0x218
-#define GPIOPK_IRQTM0_OFFS 0x21c
-#define GPIOPK_IRQTM1_OFFS 0x220
-#define GPIOPK_CTL_OFFS 0x22c
-
-#define PMGPIO_BASE (APB1_PERI_BASE_VIRT + 0x10000)
-#define BACKUP_RAM_BASE PMGPIO_BASE
-
-#define PMGPIO_DAT_OFFS 0x800
-#define PMGPIO_DOE_OFFS 0x804
-#define PMGPIO_FS0_OFFS 0x808
-#define PMGPIO_RPU_OFFS 0x810
-#define PMGPIO_RPD_OFFS 0x814
-#define PMGPIO_DV0_OFFS 0x818
-#define PMGPIO_DV1_OFFS 0x81c
-#define PMGPIO_EE0_OFFS 0x820
-#define PMGPIO_EE1_OFFS 0x824
-#define PMGPIO_CTL_OFFS 0x828
-#define PMGPIO_DI_OFFS 0x82c
-#define PMGPIO_STR_OFFS 0x830
-#define PMGPIO_STF_OFFS 0x834
-#define PMGPIO_POL_OFFS 0x838
-#define PMGPIO_APB_OFFS 0x800
-
-/* Clock controller registers */
-#define CKC_BASE ((void __iomem *)(APB1_PERI_BASE_VIRT + 0x6000))
-
-#define CLKCTRL_OFFS 0x00
-#define PLL0CFG_OFFS 0x04
-#define PLL1CFG_OFFS 0x08
-#define CLKDIVC0_OFFS 0x0c
-
-#define BCLKCTR0_OFFS 0x14
-#define SWRESET0_OFFS 0x18
-
-#define BCLKCTR1_OFFS 0x60
-#define SWRESET1_OFFS 0x64
-#define PWDCTL_OFFS 0x68
-#define PLL2CFG_OFFS 0x6c
-#define CLKDIVC1_OFFS 0x70
-
-#define ACLKREF_OFFS 0x80
-#define ACLKI2C_OFFS 0x84
-#define ACLKSPI0_OFFS 0x88
-#define ACLKSPI1_OFFS 0x8c
-#define ACLKUART0_OFFS 0x90
-#define ACLKUART1_OFFS 0x94
-#define ACLKUART2_OFFS 0x98
-#define ACLKUART3_OFFS 0x9c
-#define ACLKUART4_OFFS 0xa0
-#define ACLKTCT_OFFS 0xa4
-#define ACLKTCX_OFFS 0xa8
-#define ACLKTCZ_OFFS 0xac
-#define ACLKADC_OFFS 0xb0
-#define ACLKDAI0_OFFS 0xb4
-#define ACLKDAI1_OFFS 0xb8
-#define ACLKLCD_OFFS 0xbc
-#define ACLKSPDIF_OFFS 0xc0
-#define ACLKUSBH_OFFS 0xc4
-#define ACLKSDH0_OFFS 0xc8
-#define ACLKSDH1_OFFS 0xcc
-#define ACLKC3DEC_OFFS 0xd0
-#define ACLKEXT_OFFS 0xd4
-#define ACLKCAN0_OFFS 0xd8
-#define ACLKCAN1_OFFS 0xdc
-#define ACLKGSB0_OFFS 0xe0
-#define ACLKGSB1_OFFS 0xe4
-#define ACLKGSB2_OFFS 0xe8
-#define ACLKGSB3_OFFS 0xec
-
-#define PLLxCFG_PD (1 << 31)
-
-/* CLKCTRL bits */
-#define CLKCTRL_XE (1 << 31)
-
-/* CLKDIVCx bits */
-#define CLKDIVC0_XTE (1 << 7)
-#define CLKDIVC0_XE (1 << 15)
-#define CLKDIVC0_P1E (1 << 23)
-#define CLKDIVC0_P0E (1 << 31)
-
-#define CLKDIVC1_P2E (1 << 7)
-
-/* BCLKCTR0 clock bits */
-#define BCLKCTR0_USBD (1 << 4)
-#define BCLKCTR0_ECC (1 << 9)
-#define BCLKCTR0_USBH0 (1 << 11)
-#define BCLKCTR0_NFC (1 << 16)
-
-/* BCLKCTR1 clock bits */
-#define BCLKCTR1_USBH1 (1 << 20)
-
-/* SWRESET0 bits */
-#define SWRESET0_USBD (1 << 4)
-#define SWRESET0_USBH0 (1 << 11)
-
-/* SWRESET1 bits */
-#define SWRESET1_USBH1 (1 << 20)
-
-/* System clock sources.
- * Note: These are the clock sources that serve as parents for
- * all other clocks. They have no parents themselves.
- *
- * These values are used for struct clk->root_id. All clocks
- * that are not system clock sources have this value set to
- * CLK_SRC_NOROOT.
- * The values for system clocks start with CLK_SRC_PLL0 == 0
- * because this gives us exactly the values needed for the lower
- * 4 bits of ACLK_* registers. Therefore, CLK_SRC_NOROOT is
- * defined as -1 to not disturb the order.
- */
-enum root_clks {
- CLK_SRC_NOROOT = -1,
- CLK_SRC_PLL0 = 0,
- CLK_SRC_PLL1,
- CLK_SRC_PLL0DIV,
- CLK_SRC_PLL1DIV,
- CLK_SRC_XI,
- CLK_SRC_XIDIV,
- CLK_SRC_XTI,
- CLK_SRC_XTIDIV,
- CLK_SRC_PLL2,
- CLK_SRC_PLL2DIV,
- CLK_SRC_PK0,
- CLK_SRC_PK1,
- CLK_SRC_PK2,
- CLK_SRC_PK3,
- CLK_SRC_PK4,
- CLK_SRC_48MHZ
-};
-
-#define CLK_SRC_MASK 0xf
-
-/* Bits in ACLK* registers */
-#define ACLK_EN (1 << 28)
-#define ACLK_SEL_SHIFT 24
-#define ACLK_SEL_MASK 0x0f000000
-#define ACLK_DIV_MASK 0x00000fff
-
-/* System configuration registers */
-
-#define SCFG_BASE (APB1_PERI_BASE_VIRT + 0x13000)
-
-#define BMI_OFFS 0x00
-#define AHBCON0_OFFS 0x04
-#define APBPWE_OFFS 0x08
-#define DTCMWAIT_OFFS 0x0c
-#define ECCSEL_OFFS 0x10
-#define AHBCON1_OFFS 0x14
-#define SDHCFG_OFFS 0x18
-#define REMAP_OFFS 0x20
-#define LCDSIAE_OFFS 0x24
-#define XMCCFG_OFFS 0xe0
-#define IMCCFG_OFFS 0xe4
-
-/* Values for ECCSEL */
-#define ECCSEL_EXTMEM 0x0
-#define ECCSEL_DTCM 0x1
-#define ECCSEL_INT_SRAM 0x2
-#define ECCSEL_AHB 0x3
-
-/* Bits in XMCCFG */
-#define XMCCFG_NFCE (1 << 1)
-#define XMCCFG_FDXD (1 << 2)
-
-/* External memory controller registers */
-
-#define EMC_BASE EXT_MEM_CTRL_BASE
-
-#define SDCFG_OFFS 0x00
-#define SDFSM_OFFS 0x04
-#define MCFG_OFFS 0x08
-
-#define CSCFG0_OFFS 0x10
-#define CSCFG1_OFFS 0x14
-#define CSCFG2_OFFS 0x18
-#define CSCFG3_OFFS 0x1c
-
-#define MCFG_SDEN (1 << 4)
-
-#endif /* TCC8K_REGS_H */
diff --git a/arch/arm/plat-tcc/include/mach/timex.h b/arch/arm/plat-tcc/include/mach/timex.h
deleted file mode 100644
index 057acbe..0000000
--- a/arch/arm/plat-tcc/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * A definition needed by arch core code.
- *
- */
-#define CLOCK_TICK_RATE (HZ * 100000UL)
diff --git a/arch/arm/plat-tcc/include/mach/uncompress.h b/arch/arm/plat-tcc/include/mach/uncompress.h
deleted file mode 100644
index 7a3e33a..0000000
--- a/arch/arm/plat-tcc/include/mach/uncompress.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This file is licensed under the terms of the GPL version 2.
- */
-
-#include <linux/serial_reg.h>
-#include <linux/types.h>
-
-#include <mach/tcc8k-regs.h>
-
-unsigned int system_rev;
-
-#define ID_MASK 0x7fff
-
-static void putc(int c)
-{
- u32 *uart_lsr = (u32 *)(UART_BASE_PHYS + (UART_LSR << 2));
- u32 *uart_tx = (u32 *)(UART_BASE_PHYS + (UART_TX << 2));
-
- while (!(*uart_lsr & UART_LSR_THRE))
- barrier();
- *uart_tx = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/plat-tcc/include/mach/vmalloc.h b/arch/arm/plat-tcc/include/mach/vmalloc.h
deleted file mode 100644
index 99414d9..0000000
--- a/arch/arm/plat-tcc/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Author: <linux@telechips.com>
- * Created: June 10, 2008
- *
- * Copyright (C) 2000 Russell King.
- * Copyright (C) 2008-2009 Telechips
- *
- * Licensed under the terms of the GPL v2.
- */
-#define VMALLOC_END 0xf0000000UL
diff --git a/arch/arm/plat-tcc/system.c b/arch/arm/plat-tcc/system.c
deleted file mode 100644
index cc208fa..0000000
--- a/arch/arm/plat-tcc/system.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * System functions for Telechips TCCxxxx SoCs
- *
- * Copyright (C) Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#include <linux/io.h>
-
-#include <mach/tcc8k-regs.h>
-
-/* System reboot */
-void plat_tcc_reboot(void)
-{
- /* Make sure clocks are on */
- __raw_writel(0xffffffff, CKC_BASE + BCLKCTR0_OFFS);
-
- /* Enable watchdog reset */
- __raw_writel(0x49, TIMER_BASE + TWDCFG_OFFS);
- /* Wait for reset */
- while(1)
- ;
-}
--
1.7.6.3
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS
2011-12-22 21:22 ` [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS Hans J. Koch
@ 2012-01-03 17:08 ` Russell King - ARM Linux
2012-01-03 19:41 ` Hans J. Koch
` (2 more replies)
0 siblings, 3 replies; 13+ messages in thread
From: Russell King - ARM Linux @ 2012-01-03 17:08 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Dec 22, 2011 at 10:22:40PM +0100, Hans J. Koch wrote:
>
> The AMR subarchitecture for Telechips SoCs is completely removed,
Apart from this spelling mistake, the rest look fine. Do you want to
send me a pull request with that fixed?
Thanks.
> so there's no need for a MAINTAINERS entry.
>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Harry Sievers <hsievers@csselectronic.com>
> Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
> ---
> MAINTAINERS | 7 -------
> 1 files changed, 0 insertions(+), 7 deletions(-)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b9db108..555afaa 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1124,13 +1124,6 @@ S: Supported
> F: arch/arm/mach-shmobile/
> F: drivers/sh/
>
> -ARM/TELECHIPS ARM ARCHITECTURE
> -M: "Hans J. Koch" <hjk@hansjkoch.de>
> -L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
> -S: Maintained
> -F: arch/arm/plat-tcc/
> -F: arch/arm/mach-tcc8k/
> -
> ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
> M: Lennert Buytenhek <kernel@wantstofly.org>
> L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
> --
> 1.7.6.3
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS
2012-01-03 17:08 ` Russell King - ARM Linux
@ 2012-01-03 19:41 ` Hans J. Koch
[not found] ` <20120104030052.GC2518@local>
2012-02-02 10:45 ` [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS Pavel Machek
2 siblings, 0 replies; 13+ messages in thread
From: Hans J. Koch @ 2012-01-03 19:41 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 03, 2012 at 05:08:24PM +0000, Russell King - ARM Linux wrote:
> On Thu, Dec 22, 2011 at 10:22:40PM +0100, Hans J. Koch wrote:
> >
> > The AMR subarchitecture for Telechips SoCs is completely removed,
>
> Apart from this spelling mistake, the rest look fine. Do you want to
> send me a pull request with that fixed?
OK, I'll do that tonight.
Thanks,
Hans
>
> Thanks.
>
> > so there's no need for a MAINTAINERS entry.
> >
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Cc: Harry Sievers <hsievers@csselectronic.com>
> > Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
> > ---
> > MAINTAINERS | 7 -------
> > 1 files changed, 0 insertions(+), 7 deletions(-)
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index b9db108..555afaa 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -1124,13 +1124,6 @@ S: Supported
> > F: arch/arm/mach-shmobile/
> > F: drivers/sh/
> >
> > -ARM/TELECHIPS ARM ARCHITECTURE
> > -M: "Hans J. Koch" <hjk@hansjkoch.de>
> > -L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
> > -S: Maintained
> > -F: arch/arm/plat-tcc/
> > -F: arch/arm/mach-tcc8k/
> > -
> > ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
> > M: Lennert Buytenhek <kernel@wantstofly.org>
> > L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
> > --
> > 1.7.6.3
> >
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* [GIT PULL] Remove Telechips ARM subarch
[not found] ` <20120104030052.GC2518@local>
@ 2012-01-05 10:49 ` Russell King - ARM Linux
2012-01-05 12:49 ` Hans J. Koch
0 siblings, 1 reply; 13+ messages in thread
From: Russell King - ARM Linux @ 2012-01-05 10:49 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jan 04, 2012 at 04:00:53AM +0100, Hans J. Koch wrote:
> On Tue, Jan 03, 2012 at 05:08:24PM +0000, Russell King - ARM Linux wrote:
> > On Thu, Dec 22, 2011 at 10:22:40PM +0100, Hans J. Koch wrote:
> > >
> > > The AMR subarchitecture for Telechips SoCs is completely removed,
> >
> > Apart from this spelling mistake, the rest look fine. Do you want to
> > send me a pull request with that fixed?
>
> OK, typo fixed.
>
> The following changes since commit 5f0a6e2d503896062f641639dacfe5055c2f593b:
>
> Linux 3.2-rc7 (2011-12-23 21:51:06 -0800)
>
> are available in the git repository at:
> git://hansjkoch.de/git/linux-tcc for-russell
Well, it looks like an include or two was missed in arch/arm/Kconfig:
scripts/kconfig/conf --silentoldconfig Kconfig
arch/arm/Kconfig:1066: can't open file "arch/arm/plat-tcc/Kconfig"
Could you quickly fix that and I'll re-pull it?
^ permalink raw reply [flat|nested] 13+ messages in thread
* [GIT PULL] Remove Telechips ARM subarch
2012-01-05 10:49 ` [GIT PULL] Remove Telechips ARM subarch Russell King - ARM Linux
@ 2012-01-05 12:49 ` Hans J. Koch
0 siblings, 0 replies; 13+ messages in thread
From: Hans J. Koch @ 2012-01-05 12:49 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jan 05, 2012 at 10:49:26AM +0000, Russell King - ARM Linux wrote:
> On Wed, Jan 04, 2012 at 04:00:53AM +0100, Hans J. Koch wrote:
> > On Tue, Jan 03, 2012 at 05:08:24PM +0000, Russell King - ARM Linux wrote:
> > > On Thu, Dec 22, 2011 at 10:22:40PM +0100, Hans J. Koch wrote:
> > > >
> > > > The AMR subarchitecture for Telechips SoCs is completely removed,
> > >
> > > Apart from this spelling mistake, the rest look fine. Do you want to
> > > send me a pull request with that fixed?
> >
> > OK, typo fixed.
> >
> > The following changes since commit 5f0a6e2d503896062f641639dacfe5055c2f593b:
> >
> > Linux 3.2-rc7 (2011-12-23 21:51:06 -0800)
> >
> > are available in the git repository at:
> > git://hansjkoch.de/git/linux-tcc for-russell
>
> Well, it looks like an include or two was missed in arch/arm/Kconfig:
>
> scripts/kconfig/conf --silentoldconfig Kconfig
> arch/arm/Kconfig:1066: can't open file "arch/arm/plat-tcc/Kconfig"
Grrmpf, yes. Sorry.
>
> Could you quickly fix that and I'll re-pull it?
OK, fixed. Please pull again.
Thanks,
Hans
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS
2012-01-03 17:08 ` Russell King - ARM Linux
2012-01-03 19:41 ` Hans J. Koch
[not found] ` <20120104030052.GC2518@local>
@ 2012-02-02 10:45 ` Pavel Machek
2012-02-02 13:46 ` Arnd Bergmann
2 siblings, 1 reply; 13+ messages in thread
From: Pavel Machek @ 2012-02-02 10:45 UTC (permalink / raw)
To: linux-arm-kernel
> On Thu, Dec 22, 2011 at 10:22:40PM +0100, Hans J. Koch wrote:
> >
> > The AMR subarchitecture for Telechips SoCs is completely removed,
>
> Apart from this spelling mistake, the rest look fine. Do you want to
> send me a pull request with that fixed?
Normally features are removed using feature-removal-schedule.txt. No
maintainer is not a reason to remove it like this.
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS
2012-02-02 10:45 ` [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS Pavel Machek
@ 2012-02-02 13:46 ` Arnd Bergmann
2012-02-02 19:56 ` Hans J. Koch
0 siblings, 1 reply; 13+ messages in thread
From: Arnd Bergmann @ 2012-02-02 13:46 UTC (permalink / raw)
To: linux-arm-kernel
On Thursday 02 February 2012, Pavel Machek wrote:
> > On Thu, Dec 22, 2011 at 10:22:40PM +0100, Hans J. Koch wrote:
> > >
> > > The AMR subarchitecture for Telechips SoCs is completely removed,
> >
> > Apart from this spelling mistake, the rest look fine. Do you want to
> > send me a pull request with that fixed?
>
> Normally features are removed using feature-removal-schedule.txt. No
> maintainer is not a reason to remove it like this.
Code that doesn't build and hasn't worked for a long time is enough
reason IMHO. Note that the tcc platform was for the old arm926 based
tcc8000, not the newer ARM11 based tcc89xx/91xx/92xx/93xx or even the
Cortex-A8 based tcc88xx.
Telechips themselves seem to have given up on the ARM9 based products
(see [1]) and there is practically no code reuse between what was there
in v3.2 and what would have to get added to support the newer producs.
Is there any particular reason why you are interested in keeping
the code around?
Arnd
[1] https://www.telechips.com/technical_support/kor/opensource/opensource_list.asp
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS
2012-02-02 13:46 ` Arnd Bergmann
@ 2012-02-02 19:56 ` Hans J. Koch
2012-02-03 9:04 ` Arnd Bergmann
0 siblings, 1 reply; 13+ messages in thread
From: Hans J. Koch @ 2012-02-02 19:56 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Feb 02, 2012 at 01:46:08PM +0000, Arnd Bergmann wrote:
>
> Telechips themselves seem to have given up on the ARM9 based products
That is not true. The TCC8000 is in production and available, also
derivatives like TCC8001.
The main problem is that Telechips is not interested in markets where
SoCs are sold separately. Instead, they sell complete solutions.
If you want a new DAB car radio, they'll sell you the PCB layout,
operating system, drivers, and complete software according to your
specification. They'll even organise manufacturing of the device,
and you'll get the completely working PCB in the end. You never have
to write software yourself, let alone kernel code.
That is why few people have ever heard of Telechips. Since these
SoCs are available now for everybody, it seemed a good idea to bring
that stuff to mainline.
But without ANY contribution (not even questions) from ANYBODY,
no open source project will fly.
That's why I refused to keep the Telechips subarch up-to-date
when Russell, correctly, asked me to do so. That was on the
ARM kernel mailing list, but noone shouted, hey, I'll do it!
Consequently, I removed my stuff after talking to Thomas and Harry,
who might have been still interested.
If I hadn't removed it myself, Russell would have kicked it out
sooner or later anyway. Which is the correct thing to do for code
that nobody is interested in.
Thanks,
Hans
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS
2012-02-02 19:56 ` Hans J. Koch
@ 2012-02-03 9:04 ` Arnd Bergmann
0 siblings, 0 replies; 13+ messages in thread
From: Arnd Bergmann @ 2012-02-03 9:04 UTC (permalink / raw)
To: linux-arm-kernel
On Thursday 02 February 2012, Hans J. Koch wrote:
>
> On Thu, Feb 02, 2012 at 01:46:08PM +0000, Arnd Bergmann wrote:
> >
> > Telechips themselves seem to have given up on the ARM9 based products
>
> That is not true. The TCC8000 is in production and available, also
> derivatives like TCC8001.
>
> The main problem is that Telechips is not interested in markets where
> SoCs are sold separately. Instead, they sell complete solutions.
> If you want a new DAB car radio, they'll sell you the PCB layout,
> operating system, drivers, and complete software according to your
> specification. They'll even organise manufacturing of the device,
> and you'll get the completely working PCB in the end. You never have
> to write software yourself, let alone kernel code.
Ok, thanks for the info. Well, it also seems that Telechips is not
particularly interested in contributing to upstream either, and
according to what I've found in discussions were quite reluctant
event to provide source code where they were required to.
They did provide the 2.6.29 and 2.6.35 kernel sources for their
newer SoCs in the end, but I could not find anything for their ARMv5
parts, or any newer sources if they have any.
Arnd
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2012-02-03 9:04 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-12-22 21:19 [PATCH 0/4] arm: Remove Telechips subarchitecture Hans J. Koch
2011-12-22 21:22 ` [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS Hans J. Koch
2012-01-03 17:08 ` Russell King - ARM Linux
2012-01-03 19:41 ` Hans J. Koch
[not found] ` <20120104030052.GC2518@local>
2012-01-05 10:49 ` [GIT PULL] Remove Telechips ARM subarch Russell King - ARM Linux
2012-01-05 12:49 ` Hans J. Koch
2012-02-02 10:45 ` [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS Pavel Machek
2012-02-02 13:46 ` Arnd Bergmann
2012-02-02 19:56 ` Hans J. Koch
2012-02-03 9:04 ` Arnd Bergmann
2011-12-22 21:24 ` [PATCH 2/4] arm: Remove TCC subarch from Kconfig/Makefile Hans J. Koch
2011-12-22 21:26 ` [PATCH 3/4] arm: Remove mach-tcc8k directory Hans J. Koch
2011-12-22 21:28 ` [PATCH 4/4] arm: Remove plat-tcc directory Hans J. Koch
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.