* high speed cams are not working on usbip @ 2012-01-10 8:16 nagarjun kommineni 2012-01-10 10:39 ` Dan Carpenter 2012-01-10 10:49 ` joeyli 0 siblings, 2 replies; 11+ messages in thread From: nagarjun kommineni @ 2012-01-10 8:16 UTC (permalink / raw) To: linux-kernel, gregkh, devel Hi, problem with usbip in drivers/staging/usbip I have configured one pc as server and one as client, with this configuration high speed web cams are not working for higher resolutions. please have a look at this problem. -- Regards, Nagarjuna. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: high speed cams are not working on usbip 2012-01-10 8:16 high speed cams are not working on usbip nagarjun kommineni @ 2012-01-10 10:39 ` Dan Carpenter [not found] ` <CAKPZvrah6P4vR9vsrbtTzWwz=tVAE_eyabUhGt4+C39N4Cft8w@mail.gmail.com> 2012-01-10 10:49 ` joeyli 1 sibling, 1 reply; 11+ messages in thread From: Dan Carpenter @ 2012-01-10 10:39 UTC (permalink / raw) To: nagarjun kommineni; +Cc: linux-kernel, gregkh, devel [-- Attachment #1: Type: text/plain, Size: 434 bytes --] On Tue, Jan 10, 2012 at 01:46:11PM +0530, nagarjun kommineni wrote: > Hi, > > problem with usbip in drivers/staging/usbip > > I have configured one pc as server and one as client, with this > configuration high speed web cams are not working for higher > resolutions. > > please have a look at this problem. Did it ever work? Which is the working kernel and which is the broken kernel? regards, dan carpenter [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 836 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <CAKPZvrah6P4vR9vsrbtTzWwz=tVAE_eyabUhGt4+C39N4Cft8w@mail.gmail.com>]
* Re: high speed cams are not working on usbip [not found] ` <CAKPZvrah6P4vR9vsrbtTzWwz=tVAE_eyabUhGt4+C39N4Cft8w@mail.gmail.com> @ 2012-01-11 12:51 ` Dan Carpenter [not found] ` <CAKPZvrbwZEFY1zZ30Tcoe9TBw6AoP+Xf2oX5VenQYKvZA6Z_Pw@mail.gmail.com> 0 siblings, 1 reply; 11+ messages in thread From: Dan Carpenter @ 2012-01-11 12:51 UTC (permalink / raw) To: nagarjun kommineni; +Cc: linux-kernel, gregkh, devel, linux-usb [-- Attachment #1: Type: text/plain, Size: 216 bytes --] On Wed, Jan 11, 2012 at 06:12:31PM +0530, nagarjun kommineni wrote: > hi, > > I tested it on 3.1.4. Did it work when you tested it? Which kernel worked and which kernel failed? regards, dan carpenter [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 836 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <CAKPZvrbwZEFY1zZ30Tcoe9TBw6AoP+Xf2oX5VenQYKvZA6Z_Pw@mail.gmail.com>]
* Re: high speed cams are not working on usbip [not found] ` <CAKPZvrbwZEFY1zZ30Tcoe9TBw6AoP+Xf2oX5VenQYKvZA6Z_Pw@mail.gmail.com> @ 2012-01-11 13:52 ` Dan Carpenter 0 siblings, 0 replies; 11+ messages in thread From: Dan Carpenter @ 2012-01-11 13:52 UTC (permalink / raw) To: nagarjun kommineni; +Cc: linux-kernel, gregkh, devel, linux-usb, Bart Westgeest [-- Attachment #1: Type: text/plain, Size: 475 bytes --] So on 3.1 low resolutions work for usbip but high resolutions don't. As near as we can tell they never have, so it's not a regression. File a bug on http://bugzilla.kernel.org explaining: 1) Which resolutions you tested (working and not working). 2) What you mean when you say it doesn't work. What were the error messages etc? When it comes time to move this out of the staging directory, we'll look through bugzilla and see what bugs it has. regards, dan carpenter [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 836 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: high speed cams are not working on usbip 2012-01-10 8:16 high speed cams are not working on usbip nagarjun kommineni 2012-01-10 10:39 ` Dan Carpenter @ 2012-01-10 10:49 ` joeyli 2012-01-10 11:15 ` David Chang 1 sibling, 1 reply; 11+ messages in thread From: joeyli @ 2012-01-10 10:49 UTC (permalink / raw) To: nagarjun kommineni, DChang; +Cc: linux-kernel, gregkh, devel 於 二,2012-01-10 於 13:46 +0530,nagarjun kommineni 提到: > Hi, > > problem with usbip in drivers/staging/usbip > > I have configured one pc as server and one as client, with this > configuration high speed web cams are not working for higher > resolutions. > How "high" does this web's speed? > please have a look at this problem. > David, as I remember you test webcam in old kernel before? looks works fine. Thanks Joey Lee ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: high speed cams are not working on usbip 2012-01-10 10:49 ` joeyli @ 2012-01-10 11:15 ` David Chang [not found] ` <CAKPZvrZdw_n_JRw=WvUXEwO6E8HtE=tgQo0G5MCERbwjOY+Fgw@mail.gmail.com> 0 siblings, 1 reply; 11+ messages in thread From: David Chang @ 2012-01-10 11:15 UTC (permalink / raw) To: joeyli; +Cc: nagarjun kommineni, linux-kernel, gregkh, devel Hi Joey, 2012/1/10 joeyli <jlee@suse.com>: > 於 二,2012-01-10 於 13:46 +0530,nagarjun kommineni 提到: >> Hi, >> >> problem with usbip in drivers/staging/usbip >> >> I have configured one pc as server and one as client, with this >> configuration high speed web cams are not working for higher >> resolutions. >> > > How "high" does this web's speed? > >> please have a look at this problem. >> > > David, > as I remember you test webcam in old kernel before? looks works fine. Yes, but I would suggest using lower resolution. Regards, David > > > Thanks > Joey Lee > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <CAKPZvrZdw_n_JRw=WvUXEwO6E8HtE=tgQo0G5MCERbwjOY+Fgw@mail.gmail.com>]
[parent not found: <CAKPZvrY_Bh95+bZX52yrM2+ODFm_U40i3E461xW-ho=Z-xPM4g@mail.gmail.com>]
* Re: high speed cams are not working on usbip [not found] ` <CAKPZvrY_Bh95+bZX52yrM2+ODFm_U40i3E461xW-ho=Z-xPM4g@mail.gmail.com> @ 2012-01-13 6:54 ` joeyli 0 siblings, 0 replies; 11+ messages in thread From: joeyli @ 2012-01-13 6:54 UTC (permalink / raw) To: David Chang; +Cc: linux-kernel, gregkh, devel, linux-usb, nagarjun kommineni Hi David, Per your experience, what is the limit resolution for playing smoothly. Do you think this is relate to the protocol of usbip? Thanks Joey Lee 於 三,2012-01-11 於 18:05 +0530,nagarjun kommineni 提到: > > Hi, > I tested it on 3.1.4 > > 2012/1/11 nagarjun kommineni <nagarjunkommineni@gmail.com> > hi, > these are the my test specifications. > > OS: Scientific Linux 6.1 (default kernel 2.6.32) > Kernel: 3.1.4 (I have built it) > Web Cam: Logitech Pro 9000 > Test App: Gstreamer > > To see the web cam output I have used the Gstreamer with the > following command. > gst-launch v4l2src ! > video/x-raw-yuv,width=160,height=120,framerate=15/1 ! > ffmpegcolorspace ! autovideosink > > my cam supported resloutions are 160*120, 176*144, 320*240, > 352*288, 640*480, 800*600, 960*720, 1600*1200. > > it works fine upto 320*240, beyond this it doesn't work. > > > 2012/1/10 David Chang <dchang@suse.com> > Hi Joey, > > 2012/1/10 joeyli <jlee@suse.com>: > > 於 二,2012-01-10 於 13:46 +0530,nagarjun kommineni > 提到: > >> Hi, > >> > >> problem with usbip in drivers/staging/usbip > >> > >> I have configured one pc as server and one as > client, with this > >> configuration high speed web cams are not working > for higher > >> resolutions. > >> > > > > How "high" does this web's speed? > > > >> please have a look at this problem. > >> > > > > David, > > as I remember you test webcam in old kernel before? > looks works fine. > > > Yes, but I would suggest using lower resolution. > > Regards, > David > > > > > > Thanks > > Joey Lee > > > > > > -- > > To unsubscribe from this list: send the line > "unsubscribe linux-kernel" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at > http://vger.kernel.org/majordomo-info.html > > Please read the FAQ at http://www.tux.org/lkml/ > > > > > -- > Regards, > Nagarjuna Kommineni. > > > > > > -- > Regards, > Nagarjuna Kommineni. > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: high speed cams are not working on usbip [not found] ` <CAKPZvrZdw_n_JRw=WvUXEwO6E8HtE=tgQo0G5MCERbwjOY+Fgw@mail.gmail.com> [not found] ` <CAKPZvrY_Bh95+bZX52yrM2+ODFm_U40i3E461xW-ho=Z-xPM4g@mail.gmail.com> @ 2012-01-16 2:48 ` David Chang 2012-01-16 8:46 ` nagarjun kommineni 1 sibling, 1 reply; 11+ messages in thread From: David Chang @ 2012-01-16 2:48 UTC (permalink / raw) To: nagarjun kommineni; +Cc: joeyli, linux-kernel, gregkh, devel, linux-usb Hi, 在 2012年1月11日下午3:47,nagarjun kommineni <nagarjunkommineni@gmail.com> 寫道: > hi, > these are the my test specifications. > > OS: Scientific Linux 6.1 (default kernel 2.6.32) > Kernel: 3.1.4 (I have built it) > Web Cam: Logitech Pro 9000 > Test App: Gstreamer > > To see the web cam output I have used the Gstreamer with the following > command. > gst-launch v4l2src ! video/x-raw-yuv,width=160,height=120,framerate=15/1 ! > ffmpegcolorspace ! autovideosink > > my cam supported resloutions are 160*120, 176*144, 320*240, 352*288, > 640*480, 800*600, 960*720, 1600*1200. > > it works fine upto 320*240, beyond this it doesn't work. What's the speed of server and client network interface? David > > > 2012/1/10 David Chang <dchang@suse.com> >> >> Hi Joey, >> >> 2012/1/10 joeyli <jlee@suse.com>: >> > 於 二,2012-01-10 於 13:46 +0530,nagarjun kommineni 提到: >> >> Hi, >> >> >> >> problem with usbip in drivers/staging/usbip >> >> >> >> I have configured one pc as server and one as client, with this >> >> configuration high speed web cams are not working for higher >> >> resolutions. >> >> >> > >> > How "high" does this web's speed? >> > >> >> please have a look at this problem. >> >> >> > >> > David, >> > as I remember you test webcam in old kernel before? looks works fine. >> >> Yes, but I would suggest using lower resolution. >> >> Regards, >> David >> > >> > >> > Thanks >> > Joey Lee >> > >> > >> > -- >> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" >> > in >> > the body of a message to majordomo@vger.kernel.org >> > More majordomo info at http://vger.kernel.org/majordomo-info.html >> > Please read the FAQ at http://www.tux.org/lkml/ > > > > > -- > Regards, > Nagarjuna Kommineni. > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: high speed cams are not working on usbip 2012-01-16 2:48 ` David Chang @ 2012-01-16 8:46 ` nagarjun kommineni 2012-01-20 4:40 ` nagarjun kommineni 0 siblings, 1 reply; 11+ messages in thread From: nagarjun kommineni @ 2012-01-16 8:46 UTC (permalink / raw) To: David Chang; +Cc: joeyli, linux-kernel, gregkh, devel, linux-usb Hi, Both server and client are working at 100Mbps. On 1/16/12, David Chang <dchang@suse.com> wrote: > Hi, > > 在 2012年1月11日下午3:47,nagarjun kommineni <nagarjunkommineni@gmail.com> 寫道: >> hi, >> these are the my test specifications. >> >> OS: Scientific Linux 6.1 (default kernel 2.6.32) >> Kernel: 3.1.4 (I have built it) >> Web Cam: Logitech Pro 9000 >> Test App: Gstreamer >> >> To see the web cam output I have used the Gstreamer with the following >> command. >> gst-launch v4l2src ! video/x-raw-yuv,width=160,height=120,framerate=15/1 ! >> ffmpegcolorspace ! autovideosink >> >> my cam supported resloutions are 160*120, 176*144, 320*240, 352*288, >> 640*480, 800*600, 960*720, 1600*1200. >> >> it works fine upto 320*240, beyond this it doesn't work. > > What's the speed of server and client network interface? > > David >> >> >> 2012/1/10 David Chang <dchang@suse.com> >>> >>> Hi Joey, >>> >>> 2012/1/10 joeyli <jlee@suse.com>: >>> > 於 二,2012-01-10 於 13:46 +0530,nagarjun kommineni 提到: >>> >> Hi, >>> >> >>> >> problem with usbip in drivers/staging/usbip >>> >> >>> >> I have configured one pc as server and one as client, with this >>> >> configuration high speed web cams are not working for higher >>> >> resolutions. >>> >> >>> > >>> > How "high" does this web's speed? >>> > >>> >> please have a look at this problem. >>> >> >>> > >>> > David, >>> > as I remember you test webcam in old kernel before? looks works fine. >>> >>> Yes, but I would suggest using lower resolution. >>> >>> Regards, >>> David >>> > >>> > >>> > Thanks >>> > Joey Lee >>> > >>> > >>> > -- >>> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" >>> > in >>> > the body of a message to majordomo@vger.kernel.org >>> > More majordomo info at http://vger.kernel.org/majordomo-info.html >>> > Please read the FAQ at http://www.tux.org/lkml/ >> >> >> >> >> -- >> Regards, >> Nagarjuna Kommineni. >> >> > -- Regards, Nagarjuna Kommineni. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: high speed cams are not working on usbip 2012-01-16 8:46 ` nagarjun kommineni @ 2012-01-20 4:40 ` nagarjun kommineni [not found] ` <CAKPZvrb6gRDqU_iwK-mV5CbHZpmEKJ4=zig5c=VZvWBsnPXs5Q@mail.gmail.com> 0 siblings, 1 reply; 11+ messages in thread From: nagarjun kommineni @ 2012-01-20 4:40 UTC (permalink / raw) To: David Chang; +Cc: joeyli, linux-kernel, gregkh, devel, linux-usb Hi, I think we need to increase the depth of video buffers in UVC subsystem. On 1/16/12, nagarjun kommineni <nagarjunkommineni@gmail.com> wrote: > Hi, > > Both server and client are working at 100Mbps. > > On 1/16/12, David Chang <dchang@suse.com> wrote: >> Hi, >> >> 在 2012年1月11日下午3:47,nagarjun kommineni <nagarjunkommineni@gmail.com> 寫道: >>> hi, >>> these are the my test specifications. >>> >>> OS: Scientific Linux 6.1 (default kernel 2.6.32) >>> Kernel: 3.1.4 (I have built it) >>> Web Cam: Logitech Pro 9000 >>> Test App: Gstreamer >>> >>> To see the web cam output I have used the Gstreamer with the following >>> command. >>> gst-launch v4l2src ! video/x-raw-yuv,width=160,height=120,framerate=15/1 >>> ! >>> ffmpegcolorspace ! autovideosink >>> >>> my cam supported resloutions are 160*120, 176*144, 320*240, 352*288, >>> 640*480, 800*600, 960*720, 1600*1200. >>> >>> it works fine upto 320*240, beyond this it doesn't work. >> >> What's the speed of server and client network interface? >> >> David >>> >>> >>> 2012/1/10 David Chang <dchang@suse.com> >>>> >>>> Hi Joey, >>>> >>>> 2012/1/10 joeyli <jlee@suse.com>: >>>> > 於 二,2012-01-10 於 13:46 +0530,nagarjun kommineni 提到: >>>> >> Hi, >>>> >> >>>> >> problem with usbip in drivers/staging/usbip >>>> >> >>>> >> I have configured one pc as server and one as client, with this >>>> >> configuration high speed web cams are not working for higher >>>> >> resolutions. >>>> >> >>>> > >>>> > How "high" does this web's speed? >>>> > >>>> >> please have a look at this problem. >>>> >> >>>> > >>>> > David, >>>> > as I remember you test webcam in old kernel before? looks works fine. >>>> >>>> Yes, but I would suggest using lower resolution. >>>> >>>> Regards, >>>> David >>>> > >>>> > >>>> > Thanks >>>> > Joey Lee >>>> > >>>> > >>>> > -- >>>> > To unsubscribe from this list: send the line "unsubscribe >>>> > linux-kernel" >>>> > in >>>> > the body of a message to majordomo@vger.kernel.org >>>> > More majordomo info at http://vger.kernel.org/majordomo-info.html >>>> > Please read the FAQ at http://www.tux.org/lkml/ >>> >>> >>> >>> >>> -- >>> Regards, >>> Nagarjuna Kommineni. >>> >>> >> > > > -- > Regards, > Nagarjuna Kommineni. > -- Regards, Nagarjuna Kommineni. ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <CAKPZvrb6gRDqU_iwK-mV5CbHZpmEKJ4=zig5c=VZvWBsnPXs5Q@mail.gmail.com>]
* Re: high speed cams are not working on usbip [not found] ` <CAKPZvrb6gRDqU_iwK-mV5CbHZpmEKJ4=zig5c=VZvWBsnPXs5Q@mail.gmail.com> @ 2012-02-02 3:00 ` David Chang 0 siblings, 0 replies; 11+ messages in thread From: David Chang @ 2012-02-02 3:00 UTC (permalink / raw) To: nagarjun kommineni; +Cc: joeyli, linux-kernel, gregkh, devel, linux-usb Hi, 在 2012年1月30日下午8:58,nagarjun kommineni <nagarjunkommineni@gmail.com> 寫道: > > Hi, > > I found that, beyond the resolution 352*288, network utilisation is beyond > 100Mbps. > If I remember correctly, the usbip sugget using gigabit ethernet. Since the maximum speed of usb 2.0 is 480Mb/s bigger than 100Mbps. Regards, David > > 2012/1/20 nagarjun kommineni <nagarjunkommineni@gmail.com> >> >> Hi, >> >> I think we need to increase the depth of video buffers in UVC subsystem. >> >> >> On 1/16/12, nagarjun kommineni <nagarjunkommineni@gmail.com> wrote: >> > Hi, >> > >> > Both server and client are working at 100Mbps. >> > >> > On 1/16/12, David Chang <dchang@suse.com> wrote: >> >> Hi, >> >> >> >> 在 2012年1月11日下午3:47,nagarjun kommineni <nagarjunkommineni@gmail.com> 寫道: >> >>> hi, >> >>> these are the my test specifications. >> >>> >> >>> OS: Scientific Linux 6.1 (default kernel 2.6.32) >> >>> Kernel: 3.1.4 (I have built it) >> >>> Web Cam: Logitech Pro 9000 >> >>> Test App: Gstreamer >> >>> >> >>> To see the web cam output I have used the Gstreamer with the >> >>> following >> >>> command. >> >>> gst-launch v4l2src ! >> >>> video/x-raw-yuv,width=160,height=120,framerate=15/1 >> >>> ! >> >>> ffmpegcolorspace ! autovideosink >> >>> >> >>> my cam supported resloutions are 160*120, 176*144, 320*240, 352*288, >> >>> 640*480, 800*600, 960*720, 1600*1200. >> >>> >> >>> it works fine upto 320*240, beyond this it doesn't work. >> >> >> >> What's the speed of server and client network interface? >> >> >> >> David >> >>> >> >>> >> >>> 2012/1/10 David Chang <dchang@suse.com> >> >>>> >> >>>> Hi Joey, >> >>>> >> >>>> 2012/1/10 joeyli <jlee@suse.com>: >> >>>> > 於 二,2012-01-10 於 13:46 +0530,nagarjun kommineni 提到: >> >>>> >> Hi, >> >>>> >> >> >>>> >> problem with usbip in drivers/staging/usbip >> >>>> >> >> >>>> >> I have configured one pc as server and one as client, with this >> >>>> >> configuration high speed web cams are not working for higher >> >>>> >> resolutions. >> >>>> >> >> >>>> > >> >>>> > How "high" does this web's speed? >> >>>> > >> >>>> >> please have a look at this problem. >> >>>> >> >> >>>> > >> >>>> > David, >> >>>> > as I remember you test webcam in old kernel before? looks works >> >>>> > fine. >> >>>> >> >>>> Yes, but I would suggest using lower resolution. >> >>>> >> >>>> Regards, >> >>>> David >> >>>> > >> >>>> > >> >>>> > Thanks >> >>>> > Joey Lee >> >>>> > >> >>>> > >> >>>> > -- >> >>>> > To unsubscribe from this list: send the line "unsubscribe >> >>>> > linux-kernel" >> >>>> > in >> >>>> > the body of a message to majordomo@vger.kernel.org >> >>>> > More majordomo info at http://vger.kernel.org/majordomo-info.html >> >>>> > Please read the FAQ at http://www.tux.org/lkml/ >> >>> >> >>> >> >>> >> >>> >> >>> -- >> >>> Regards, >> >>> Nagarjuna Kommineni. >> >>> >> >>> >> >> >> > >> > >> > -- >> > Regards, >> > Nagarjuna Kommineni. >> > >> >> >> -- >> Regards, >> Nagarjuna Kommineni. > > > > > -- > Regards, > Nagarjuna Kommineni. > > ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2012-02-02 3:00 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2012-01-10 8:16 high speed cams are not working on usbip nagarjun kommineni 2012-01-10 10:39 ` Dan Carpenter [not found] ` <CAKPZvrah6P4vR9vsrbtTzWwz=tVAE_eyabUhGt4+C39N4Cft8w@mail.gmail.com> 2012-01-11 12:51 ` Dan Carpenter [not found] ` <CAKPZvrbwZEFY1zZ30Tcoe9TBw6AoP+Xf2oX5VenQYKvZA6Z_Pw@mail.gmail.com> 2012-01-11 13:52 ` Dan Carpenter 2012-01-10 10:49 ` joeyli 2012-01-10 11:15 ` David Chang [not found] ` <CAKPZvrZdw_n_JRw=WvUXEwO6E8HtE=tgQo0G5MCERbwjOY+Fgw@mail.gmail.com> [not found] ` <CAKPZvrY_Bh95+bZX52yrM2+ODFm_U40i3E461xW-ho=Z-xPM4g@mail.gmail.com> 2012-01-13 6:54 ` joeyli 2012-01-16 2:48 ` David Chang 2012-01-16 8:46 ` nagarjun kommineni 2012-01-20 4:40 ` nagarjun kommineni [not found] ` <CAKPZvrb6gRDqU_iwK-mV5CbHZpmEKJ4=zig5c=VZvWBsnPXs5Q@mail.gmail.com> 2012-02-02 3:00 ` David Chang
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.