[PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Antti P Miettinen]

[did not reach linux-pm as I sent to wrong address, sorry for
duplicates]

The inspiration for this patch series is the N9 CPU frequency boost
upon input events:

http://www.spinics.net/lists/cpufreq/msg00667.html

and the related changes in git://codeaurora.org/kernel/msm.git tree.
Those patches modify the ondemand cpufreq governor. This patch series
adds minimum and maximum CPU frequency as PM QoS parameters and
modifies the cpufreq core to enforce the PM QoS limits. There is also
an example module for boosting the frequency upon input events.

I've been testing these changes against Ubuntu 3.2 kernel on a Dell
E6420 with the ACPI cpufreq driver. The patches are against
linux-next/master, compile tested against it.

V2:
* split min and max to separate commits
* handle PM QoS min above max as max
* handle PM QoS max below min as min

	--Antti

Alex Frid (1):
  PM QoS: Simplify PM QoS expansion/merge

Antti P Miettinen (7):
  PM QoS: Add CPU frequency minimum as PM QoS param
  cpufreq: Export user_policy min/max
  cpufreq: Preserve sysfs min/max request
  cpufreq: Enforce PM QoS minimum limit
  input: CPU frequency booster
  PM QoS: Add CPU frequency maximum as PM QoS param
  cpufreq: Enforce PM QoS maximum frequency

 drivers/cpufreq/cpufreq.c     |   59 +++++++++++++-
 drivers/input/Kconfig         |    9 ++
 drivers/input/Makefile        |    1 +
 drivers/input/input-cfboost.c |  174 +++++++++++++++++++++++++++++++++++++++++
 include/linux/pm_qos.h        |   19 ++++-
 kernel/power/qos.c            |   55 ++++++++++----
 6 files changed, 295 insertions(+), 22 deletions(-)
 create mode 100644 drivers/input/input-cfboost.c

-- 
1.7.4.1

[PATCH v2 1/8] PM QoS: Simplify PM QoS expansion/merge

[Antti P Miettinen]

From: Alex Frid <afrid@nvidia.com>

- Replace class ID #define with enumeration
- Loop through PM QoS objects during initialization (rather than
  initializing them one-by-one)

Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-by: Antti Miettinen <amiettinen@nvidia.com>
Reviewed-by: Diwakar Tundlam <dtundlam@nvidia.com>
Reviewed-by: Scott Williams <scwilliams@nvidia.com>
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
---
 include/linux/pm_qos.h |   14 +++++++++-----
 kernel/power/qos.c     |   23 ++++++++++-------------
 2 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h
index e5bbcba..5ac91d8 100644
--- a/include/linux/pm_qos.h
+++ b/include/linux/pm_qos.h
@@ -9,12 +9,16 @@
 #include <linux/miscdevice.h>
 #include <linux/device.h>
 
-#define PM_QOS_RESERVED 0
-#define PM_QOS_CPU_DMA_LATENCY 1
-#define PM_QOS_NETWORK_LATENCY 2
-#define PM_QOS_NETWORK_THROUGHPUT 3
+enum {
+	PM_QOS_RESERVED = 0,
+	PM_QOS_CPU_DMA_LATENCY,
+	PM_QOS_NETWORK_LATENCY,
+	PM_QOS_NETWORK_THROUGHPUT,
+
+	/* insert new class ID */
+	PM_QOS_NUM_CLASSES,
+};
 
-#define PM_QOS_NUM_CLASSES 4
 #define PM_QOS_DEFAULT_VALUE -1
 
 #define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE	(2000 * USEC_PER_SEC)
diff --git a/kernel/power/qos.c b/kernel/power/qos.c
index 995e3bd..d6d6dbd 100644
--- a/kernel/power/qos.c
+++ b/kernel/power/qos.c
@@ -469,21 +469,18 @@ static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf,
 static int __init pm_qos_power_init(void)
 {
 	int ret = 0;
+	int i;
 
-	ret = register_pm_qos_misc(&cpu_dma_pm_qos);
-	if (ret < 0) {
-		printk(KERN_ERR "pm_qos_param: cpu_dma_latency setup failed\n");
-		return ret;
-	}
-	ret = register_pm_qos_misc(&network_lat_pm_qos);
-	if (ret < 0) {
-		printk(KERN_ERR "pm_qos_param: network_latency setup failed\n");
-		return ret;
+	BUILD_BUG_ON(ARRAY_SIZE(pm_qos_array) != PM_QOS_NUM_CLASSES);
+
+	for (i = 1; i < PM_QOS_NUM_CLASSES; i++) {
+		ret = register_pm_qos_misc(pm_qos_array[i]);
+		if (ret < 0) {
+			printk(KERN_ERR "pm_qos_param: %s setup failed\n",
+			       pm_qos_array[i]->name);
+			return ret;
+		}
 	}
-	ret = register_pm_qos_misc(&network_throughput_pm_qos);
-	if (ret < 0)
-		printk(KERN_ERR
-			"pm_qos_param: network_throughput setup failed\n");
 
 	return ret;
 }
-- 
1.7.4.1

Re: [PATCH v2 1/8] PM QoS: Simplify PM QoS expansion/merge

[Rafael J. Wysocki]

On Monday, January 16, 2012, Antti P Miettinen wrote:
> From: Alex Frid <afrid@nvidia.com>
> 
> - Replace class ID #define with enumeration
> - Loop through PM QoS objects during initialization (rather than
>   initializing them one-by-one)
> 
> Signed-off-by: Alex Frid <afrid@nvidia.com>
> Reviewed-by: Antti Miettinen <amiettinen@nvidia.com>
> Reviewed-by: Diwakar Tundlam <dtundlam@nvidia.com>
> Reviewed-by: Scott Williams <scwilliams@nvidia.com>
> Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>

This one has been ACKed by Mark IIRC.

Thanks,
Rafael


> ---
>  include/linux/pm_qos.h |   14 +++++++++-----
>  kernel/power/qos.c     |   23 ++++++++++-------------
>  2 files changed, 19 insertions(+), 18 deletions(-)
> 
> diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h
> index e5bbcba..5ac91d8 100644
> --- a/include/linux/pm_qos.h
> +++ b/include/linux/pm_qos.h
> @@ -9,12 +9,16 @@
>  #include <linux/miscdevice.h>
>  #include <linux/device.h>
>  
> -#define PM_QOS_RESERVED 0
> -#define PM_QOS_CPU_DMA_LATENCY 1
> -#define PM_QOS_NETWORK_LATENCY 2
> -#define PM_QOS_NETWORK_THROUGHPUT 3
> +enum {
> +	PM_QOS_RESERVED = 0,
> +	PM_QOS_CPU_DMA_LATENCY,
> +	PM_QOS_NETWORK_LATENCY,
> +	PM_QOS_NETWORK_THROUGHPUT,
> +
> +	/* insert new class ID */
> +	PM_QOS_NUM_CLASSES,
> +};
>  
> -#define PM_QOS_NUM_CLASSES 4
>  #define PM_QOS_DEFAULT_VALUE -1
>  
>  #define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE	(2000 * USEC_PER_SEC)
> diff --git a/kernel/power/qos.c b/kernel/power/qos.c
> index 995e3bd..d6d6dbd 100644
> --- a/kernel/power/qos.c
> +++ b/kernel/power/qos.c
> @@ -469,21 +469,18 @@ static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf,
>  static int __init pm_qos_power_init(void)
>  {
>  	int ret = 0;
> +	int i;
>  
> -	ret = register_pm_qos_misc(&cpu_dma_pm_qos);
> -	if (ret < 0) {
> -		printk(KERN_ERR "pm_qos_param: cpu_dma_latency setup failed\n");
> -		return ret;
> -	}
> -	ret = register_pm_qos_misc(&network_lat_pm_qos);
> -	if (ret < 0) {
> -		printk(KERN_ERR "pm_qos_param: network_latency setup failed\n");
> -		return ret;
> +	BUILD_BUG_ON(ARRAY_SIZE(pm_qos_array) != PM_QOS_NUM_CLASSES);
> +
> +	for (i = 1; i < PM_QOS_NUM_CLASSES; i++) {
> +		ret = register_pm_qos_misc(pm_qos_array[i]);
> +		if (ret < 0) {
> +			printk(KERN_ERR "pm_qos_param: %s setup failed\n",
> +			       pm_qos_array[i]->name);
> +			return ret;
> +		}
>  	}
> -	ret = register_pm_qos_misc(&network_throughput_pm_qos);
> -	if (ret < 0)
> -		printk(KERN_ERR
> -			"pm_qos_param: network_throughput setup failed\n");
>  
>  	return ret;
>  }
> 

Re: [PATCH v2 1/8] PM QoS: Simplify PM QoS expansion/merge

[mark gross]

On Mon, Jan 16, 2012 at 10:22:09PM +0100, Rafael J. Wysocki wrote:
> On Monday, January 16, 2012, Antti P Miettinen wrote:
> > From: Alex Frid <afrid@nvidia.com>
> > 
> > - Replace class ID #define with enumeration
> > - Loop through PM QoS objects during initialization (rather than
> >   initializing them one-by-one)
> > 
> > Signed-off-by: Alex Frid <afrid@nvidia.com>
> > Reviewed-by: Antti Miettinen <amiettinen@nvidia.com>
> > Reviewed-by: Diwakar Tundlam <dtundlam@nvidia.com>
> > Reviewed-by: Scott Williams <scwilliams@nvidia.com>
> > Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
> 
> This one has been ACKed by Mark IIRC.

yes it was.  I sent responces to a few other patches that I can't seem
to find in the list server archives.  Am I doing something dumb?

--mark

> Thanks,
> Rafael
> 
> 
> > ---
> >  include/linux/pm_qos.h |   14 +++++++++-----
> >  kernel/power/qos.c     |   23 ++++++++++-------------
> >  2 files changed, 19 insertions(+), 18 deletions(-)
> > 
> > diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h
> > index e5bbcba..5ac91d8 100644
> > --- a/include/linux/pm_qos.h
> > +++ b/include/linux/pm_qos.h
> > @@ -9,12 +9,16 @@
> >  #include <linux/miscdevice.h>
> >  #include <linux/device.h>
> >  
> > -#define PM_QOS_RESERVED 0
> > -#define PM_QOS_CPU_DMA_LATENCY 1
> > -#define PM_QOS_NETWORK_LATENCY 2
> > -#define PM_QOS_NETWORK_THROUGHPUT 3
> > +enum {
> > +	PM_QOS_RESERVED = 0,
> > +	PM_QOS_CPU_DMA_LATENCY,
> > +	PM_QOS_NETWORK_LATENCY,
> > +	PM_QOS_NETWORK_THROUGHPUT,
> > +
> > +	/* insert new class ID */
> > +	PM_QOS_NUM_CLASSES,
> > +};
> >  
> > -#define PM_QOS_NUM_CLASSES 4
> >  #define PM_QOS_DEFAULT_VALUE -1
> >  
> >  #define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE	(2000 * USEC_PER_SEC)
> > diff --git a/kernel/power/qos.c b/kernel/power/qos.c
> > index 995e3bd..d6d6dbd 100644
> > --- a/kernel/power/qos.c
> > +++ b/kernel/power/qos.c
> > @@ -469,21 +469,18 @@ static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf,
> >  static int __init pm_qos_power_init(void)
> >  {
> >  	int ret = 0;
> > +	int i;
> >  
> > -	ret = register_pm_qos_misc(&cpu_dma_pm_qos);
> > -	if (ret < 0) {
> > -		printk(KERN_ERR "pm_qos_param: cpu_dma_latency setup failed\n");
> > -		return ret;
> > -	}
> > -	ret = register_pm_qos_misc(&network_lat_pm_qos);
> > -	if (ret < 0) {
> > -		printk(KERN_ERR "pm_qos_param: network_latency setup failed\n");
> > -		return ret;
> > +	BUILD_BUG_ON(ARRAY_SIZE(pm_qos_array) != PM_QOS_NUM_CLASSES);
> > +
> > +	for (i = 1; i < PM_QOS_NUM_CLASSES; i++) {
> > +		ret = register_pm_qos_misc(pm_qos_array[i]);
> > +		if (ret < 0) {
> > +			printk(KERN_ERR "pm_qos_param: %s setup failed\n",
> > +			       pm_qos_array[i]->name);
> > +			return ret;
> > +		}
> >  	}
> > -	ret = register_pm_qos_misc(&network_throughput_pm_qos);
> > -	if (ret < 0)
> > -		printk(KERN_ERR
> > -			"pm_qos_param: network_throughput setup failed\n");
> >  
> >  	return ret;
> >  }
> > 
> 

[PATCH v2 2/8] PM QoS: Add CPU frequency minimum as PM QoS param

[Antti P Miettinen]

Add minimum CPU frequency as PM QoS parameter.

Signed-off-by: Antti P Miettinen <amiettinen@nvidia.com>
---
 include/linux/pm_qos.h |    3 +++
 kernel/power/qos.c     |   17 ++++++++++++++++-
 2 files changed, 19 insertions(+), 1 deletions(-)

diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h
index 5ac91d8..54a0d00 100644
--- a/include/linux/pm_qos.h
+++ b/include/linux/pm_qos.h
@@ -14,8 +14,10 @@ enum {
 	PM_QOS_CPU_DMA_LATENCY,
 	PM_QOS_NETWORK_LATENCY,
 	PM_QOS_NETWORK_THROUGHPUT,
+	PM_QOS_CPU_FREQ_MIN,
 
 	/* insert new class ID */
+
 	PM_QOS_NUM_CLASSES,
 };
 
@@ -25,6 +27,7 @@ enum {
 #define PM_QOS_NETWORK_LAT_DEFAULT_VALUE	(2000 * USEC_PER_SEC)
 #define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE	0
 #define PM_QOS_DEV_LAT_DEFAULT_VALUE		0
+#define PM_QOS_CPU_FREQ_MIN_DEFAULT_VALUE	0
 
 struct pm_qos_request {
 	struct plist_node node;
diff --git a/kernel/power/qos.c b/kernel/power/qos.c
index d6d6dbd..07d761a 100644
--- a/kernel/power/qos.c
+++ b/kernel/power/qos.c
@@ -101,11 +101,26 @@ static struct pm_qos_object network_throughput_pm_qos = {
 };
 
 
+static BLOCKING_NOTIFIER_HEAD(cpu_freq_min_notifier);
+static struct pm_qos_constraints cpu_freq_min_constraints = {
+	.list = PLIST_HEAD_INIT(cpu_freq_min_constraints.list),
+	.target_value = PM_QOS_CPU_FREQ_MIN_DEFAULT_VALUE,
+	.default_value = PM_QOS_CPU_FREQ_MIN_DEFAULT_VALUE,
+	.type = PM_QOS_MAX,
+	.notifiers = &cpu_freq_min_notifier,
+};
+static struct pm_qos_object cpu_freq_min_pm_qos = {
+	.constraints = &cpu_freq_min_constraints,
+	.name = "cpu_freq_min",
+};
+
+
 static struct pm_qos_object *pm_qos_array[] = {
 	&null_pm_qos,
 	&cpu_dma_pm_qos,
 	&network_lat_pm_qos,
-	&network_throughput_pm_qos
+	&network_throughput_pm_qos,
+	&cpu_freq_min_pm_qos,
 };
 
 static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf,
-- 
1.7.4.1

[PATCH v2 3/8] cpufreq: Export user_policy min/max

[Antti P Miettinen]

Add sysfs nodes for user_policy min and max settings.

Signed-off-by: Antti P Miettinen <amiettinen@nvidia.com>
---
 drivers/cpufreq/cpufreq.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 622013f..f115888 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -363,6 +363,8 @@ show_one(cpuinfo_transition_latency, cpuinfo.transition_latency);
 show_one(scaling_min_freq, min);
 show_one(scaling_max_freq, max);
 show_one(scaling_cur_freq, cur);
+show_one(policy_min_freq, user_policy.min);
+show_one(policy_max_freq, user_policy.max);
 
 static int __cpufreq_set_policy(struct cpufreq_policy *data,
 				struct cpufreq_policy *policy);
@@ -581,6 +583,8 @@ cpufreq_freq_attr_rw(scaling_min_freq);
 cpufreq_freq_attr_rw(scaling_max_freq);
 cpufreq_freq_attr_rw(scaling_governor);
 cpufreq_freq_attr_rw(scaling_setspeed);
+cpufreq_freq_attr_ro(policy_min_freq);
+cpufreq_freq_attr_ro(policy_max_freq);
 
 static struct attribute *default_attrs[] = {
 	&cpuinfo_min_freq.attr,
@@ -594,6 +598,8 @@ static struct attribute *default_attrs[] = {
 	&scaling_driver.attr,
 	&scaling_available_governors.attr,
 	&scaling_setspeed.attr,
+	&policy_min_freq.attr,
+	&policy_max_freq.attr,
 	NULL
 };
 
-- 
1.7.4.1

[PATCH v2 4/8] cpufreq: Preserve sysfs min/max request

[Antti P Miettinen]

Store the value received via sysfs as the user_policy
min/max value instead of the currently enforced min/max.
This allows restoring the user min/max values when
constraints on enforced min/max change.

Signed-off-by: Antti P Miettinen <amiettinen@nvidia.com>
---
 drivers/cpufreq/cpufreq.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index f115888..127e37a 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -388,7 +388,7 @@ static ssize_t store_##file_name					\
 		return -EINVAL;						\
 									\
 	ret = __cpufreq_set_policy(policy, &new_policy);		\
-	policy->user_policy.object = policy->object;			\
+	policy->user_policy.object = new_policy.object;			\
 									\
 	return ret ? ret : count;					\
 }
-- 
1.7.4.1

[PATCH v2 5/8] cpufreq: Enforce PM QoS minimum limit

[Antti P Miettinen]

Observe PM QoS CPU frequency minimum in addition
to policy settings.

Signed-off-by: Antti P Miettinen <amiettinen@nvidia.com>
---
 drivers/cpufreq/cpufreq.c |   41 +++++++++++++++++++++++++++++++++++++++--
 1 files changed, 39 insertions(+), 2 deletions(-)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 127e37a..c2c1c62 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -29,6 +29,7 @@
 #include <linux/completion.h>
 #include <linux/mutex.h>
 #include <linux/syscore_ops.h>
+#include <linux/pm_qos.h>
 
 #include <trace/events/power.h>
 
@@ -1633,9 +1634,16 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 				struct cpufreq_policy *policy)
 {
 	int ret = 0;
+	unsigned int pmin = policy->min;
+	unsigned int pmax = policy->max;
+	unsigned int qmin = min(pm_qos_request(PM_QOS_CPU_FREQ_MIN),
+				data->max);
 
-	pr_debug("setting new policy for CPU %u: %u - %u kHz\n", policy->cpu,
-		policy->min, policy->max);
+	pr_debug("setting new policy for CPU %u: %u/%u - %u kHz\n",
+		 policy->cpu, pmin, qmin, pmax);
+
+	/* clamp the new policy to PM QoS limits */
+	policy->min = max(pmin, qmin);
 
 	memcpy(&policy->cpuinfo, &data->cpuinfo,
 				sizeof(struct cpufreq_cpuinfo));
@@ -1710,6 +1718,9 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 	}
 
 error_out:
+	/* restore the limits that the policy requested */
+	policy->min = pmin;
+	policy->max = pmax;
 	return ret;
 }
 
@@ -1903,9 +1914,32 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver)
 }
 EXPORT_SYMBOL_GPL(cpufreq_unregister_driver);
 
+static int cpu_freq_notify(struct notifier_block *b,
+			   unsigned long l, void *v);
+
+static struct notifier_block min_freq_notifier = {
+	.notifier_call = cpu_freq_notify,
+};
+
+static int cpu_freq_notify(struct notifier_block *b,
+			   unsigned long l, void *v)
+{
+	int cpu;
+	pr_debug("PM QoS min %lu\n", l);
+	for_each_online_cpu(cpu) {
+		struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+		if (policy) {
+			cpufreq_update_policy(policy->cpu);
+			cpufreq_cpu_put(policy);
+		}
+	}
+	return NOTIFY_OK;
+}
+
 static int __init cpufreq_core_init(void)
 {
 	int cpu;
+	int rc;
 
 	for_each_possible_cpu(cpu) {
 		per_cpu(cpufreq_policy_cpu, cpu) = -1;
@@ -1915,6 +1949,9 @@ static int __init cpufreq_core_init(void)
 	cpufreq_global_kobject = kobject_create_and_add("cpufreq", &cpu_subsys.dev_root->kobj);
 	BUG_ON(!cpufreq_global_kobject);
 	register_syscore_ops(&cpufreq_syscore_ops);
+	rc = pm_qos_add_notifier(PM_QOS_CPU_FREQ_MIN,
+				 &min_freq_notifier);
+	BUG_ON(rc);
 
 	return 0;
 }
-- 
1.7.4.1

[PATCH v2 6/8] input: CPU frequency booster

[Antti P Miettinen]

Inspired by cpufreq ondemand governor changes at
git://codeaurora.org/kernel/msm.git tree in commits:

    2a6181bc76c6ce46ca0fa8e547be42acd534cf0e
    1cca8861d8fda4e05f6b0c59c60003345c15454d
    96a9aeb02bf5b3fbbef47e44460750eb275e9f1b
    b600449501cf15928440f87eff86b1f32d14214e
    88a65c7ae04632ffee11f9fc628d7ab017c06b83

Signed-off-by: Antti P Miettinen <amiettinen@nvidia.com>
---
 drivers/input/Kconfig         |    9 ++
 drivers/input/Makefile        |    1 +
 drivers/input/input-cfboost.c |  174 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 184 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/input-cfboost.c

diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 001b147..3859f78 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -161,6 +161,15 @@ config INPUT_APMPOWER
 	  To compile this driver as a module, choose M here: the
 	  module will be called apm-power.
 
+config INPUT_CFBOOST
+	tristate "CPU frequency booster"
+	depends on INPUT && CPU_FREQ
+	help
+	  Say Y here if you want to boost frequency upon input events;
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called input-cfboost.
+
 comment "Input Device Drivers"
 
 source "drivers/input/keyboard/Kconfig"
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index 0c78949..6cad177 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_INPUT_TOUCHSCREEN)	+= touchscreen/
 obj-$(CONFIG_INPUT_MISC)	+= misc/
 
 obj-$(CONFIG_INPUT_APMPOWER)	+= apm-power.o
+obj-$(CONFIG_INPUT_CFBOOST)	+= input-cfboost.o
diff --git a/drivers/input/input-cfboost.c b/drivers/input/input-cfboost.c
new file mode 100644
index 0000000..bef3ec5
--- /dev/null
+++ b/drivers/input/input-cfboost.c
@@ -0,0 +1,174 @@
+/*
+ * drivers/input/input-cfboost.c
+ *
+ * Copyright (C) 2012 NVIDIA Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/printk.h>
+#include <linux/workqueue.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/pm_qos.h>
+
+/* This module listens to input events and sets a temporary frequency
+ * floor upon input event detection. This is based on changes to
+ * cpufreq ondemand governor by:
+ *
+ * Tero Kristo <tero.kristo@nokia.com>
+ * Brian Steuer <bsteuer@codeaurora.org>
+ * David Ng <dave@codeaurora.org>
+ *
+ * at git://codeaurora.org/kernel/msm.git tree, commits:
+ *
+ * 2a6181bc76c6ce46ca0fa8e547be42acd534cf0e
+ * 1cca8861d8fda4e05f6b0c59c60003345c15454d
+ * 96a9aeb02bf5b3fbbef47e44460750eb275e9f1b
+ * b600449501cf15928440f87eff86b1f32d14214e
+ * 88a65c7ae04632ffee11f9fc628d7ab017c06b83
+ */
+
+MODULE_AUTHOR("Antti P Miettinen <amiettinen@nvidia.com>");
+MODULE_DESCRIPTION("Input event CPU frequency booster");
+MODULE_LICENSE("GPL v2");
+
+
+static struct pm_qos_request qos_req;
+static struct work_struct boost;
+static struct delayed_work unboost;
+static unsigned int boost_freq; /* kHz */
+module_param(boost_freq, uint, 0644);
+static unsigned long boost_time = 500; /* ms */
+module_param(boost_time, ulong, 0644);
+static struct workqueue_struct *cfb_wq;
+
+static void cfb_boost(struct work_struct *w)
+{
+	cancel_delayed_work_sync(&unboost);
+	pm_qos_update_request(&qos_req, boost_freq);
+	queue_delayed_work(cfb_wq, &unboost, msecs_to_jiffies(boost_time));
+}
+
+static void cfb_unboost(struct work_struct *w)
+{
+	pm_qos_update_request(&qos_req, PM_QOS_DEFAULT_VALUE);
+}
+
+static void cfb_input_event(struct input_handle *handle, unsigned int type,
+			    unsigned int code, int value)
+{
+	if (!work_pending(&boost))
+		queue_work(cfb_wq, &boost);
+}
+
+static int cfb_input_connect(struct input_handler *handler,
+			     struct input_dev *dev,
+			     const struct input_device_id *id)
+{
+	struct input_handle *handle;
+	int error;
+
+	handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL);
+	if (!handle)
+		return -ENOMEM;
+
+	handle->dev = dev;
+	handle->handler = handler;
+	handle->name = "icfboost";
+
+	error = input_register_handle(handle);
+	if (error)
+		goto err2;
+
+	error = input_open_device(handle);
+	if (error)
+		goto err1;
+
+	return 0;
+err1:
+	input_unregister_handle(handle);
+err2:
+	kfree(handle);
+	return error;
+}
+
+static void cfb_input_disconnect(struct input_handle *handle)
+{
+	input_close_device(handle);
+	input_unregister_handle(handle);
+	kfree(handle);
+}
+
+/* XXX make configurable */
+static const struct input_device_id cfb_ids[] = {
+	{ /* touch screen */
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+				INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_ABS) },
+		.keybit = {[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH) },
+	},
+	{ /* mouse */
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+				INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_REL) },
+		.keybit = {[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_MOUSE) },
+	},
+	{ },
+};
+
+static struct input_handler cfb_input_handler = {
+	.event		= cfb_input_event,
+	.connect	= cfb_input_connect,
+	.disconnect	= cfb_input_disconnect,
+	.name		= "icfboost",
+	.id_table	= cfb_ids,
+};
+
+static int __init cfboost_init(void)
+{
+	int ret;
+
+	cfb_wq = create_workqueue("icfb-wq");
+	if (!cfb_wq)
+		return -ENOMEM;
+	INIT_WORK(&boost, cfb_boost);
+	INIT_DELAYED_WORK(&unboost, cfb_unboost);
+	ret = input_register_handler(&cfb_input_handler);
+	if (ret) {
+		destroy_workqueue(cfb_wq);
+		return ret;
+	}
+	pm_qos_add_request(&qos_req, PM_QOS_CPU_FREQ_MIN,
+			   PM_QOS_DEFAULT_VALUE);
+	return 0;
+}
+
+static void __exit cfboost_exit(void)
+{
+	/* stop input events */
+	input_unregister_handler(&cfb_input_handler);
+	/* cancel pending work requests */
+	cancel_work_sync(&boost);
+	cancel_delayed_work_sync(&unboost);
+	/* clean up */
+	destroy_workqueue(cfb_wq);
+	pm_qos_remove_request(&qos_req);
+}
+
+module_init(cfboost_init);
+module_exit(cfboost_exit);
-- 
1.7.4.1

[PATCH v2 7/8] PM QoS: Add CPU frequency maximum as PM QoS param

[Antti P Miettinen]

Add maximum CPU frequency as PM QoS parameter.

Signed-off-by: Antti P Miettinen <amiettinen@nvidia.com>
---
 include/linux/pm_qos.h |    2 ++
 kernel/power/qos.c     |   15 +++++++++++++++
 2 files changed, 17 insertions(+), 0 deletions(-)

diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h
index 54a0d00..7b8d08b 100644
--- a/include/linux/pm_qos.h
+++ b/include/linux/pm_qos.h
@@ -15,6 +15,7 @@ enum {
 	PM_QOS_NETWORK_LATENCY,
 	PM_QOS_NETWORK_THROUGHPUT,
 	PM_QOS_CPU_FREQ_MIN,
+	PM_QOS_CPU_FREQ_MAX,
 
 	/* insert new class ID */
 
@@ -28,6 +29,7 @@ enum {
 #define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE	0
 #define PM_QOS_DEV_LAT_DEFAULT_VALUE		0
 #define PM_QOS_CPU_FREQ_MIN_DEFAULT_VALUE	0
+#define PM_QOS_CPU_FREQ_MAX_DEFAULT_VALUE	LONG_MAX
 
 struct pm_qos_request {
 	struct plist_node node;
diff --git a/kernel/power/qos.c b/kernel/power/qos.c
index 07d761a..04b744b 100644
--- a/kernel/power/qos.c
+++ b/kernel/power/qos.c
@@ -115,12 +115,27 @@ static struct pm_qos_object cpu_freq_min_pm_qos = {
 };
 
 
+static BLOCKING_NOTIFIER_HEAD(cpu_freq_max_notifier);
+static struct pm_qos_constraints cpu_freq_max_constraints = {
+	.list = PLIST_HEAD_INIT(cpu_freq_max_constraints.list),
+	.target_value = PM_QOS_CPU_FREQ_MAX_DEFAULT_VALUE,
+	.default_value = PM_QOS_CPU_FREQ_MAX_DEFAULT_VALUE,
+	.type = PM_QOS_MIN,
+	.notifiers = &cpu_freq_max_notifier,
+};
+static struct pm_qos_object cpu_freq_max_pm_qos = {
+	.constraints = &cpu_freq_max_constraints,
+	.name = "cpu_freq_max",
+};
+
+
 static struct pm_qos_object *pm_qos_array[] = {
 	&null_pm_qos,
 	&cpu_dma_pm_qos,
 	&network_lat_pm_qos,
 	&network_throughput_pm_qos,
 	&cpu_freq_min_pm_qos,
+	&cpu_freq_max_pm_qos,
 };
 
 static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf,
-- 
1.7.4.1

[PATCH v2 8/8] cpufreq: Enforce PM QoS maximum frequency

[Antti P Miettinen]

Observe PM QoS CPU frequency maximum in addition to
policy settings.

Signed-off-by: Antti P Miettinen <amiettinen@nvidia.com>
---
 drivers/cpufreq/cpufreq.c |   16 +++++++++++++---
 1 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index c2c1c62..d233a8b 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1638,12 +1638,15 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 	unsigned int pmax = policy->max;
 	unsigned int qmin = min(pm_qos_request(PM_QOS_CPU_FREQ_MIN),
 				data->max);
+	unsigned int qmax = max(pm_qos_request(PM_QOS_CPU_FREQ_MAX),
+				data->min);
 
-	pr_debug("setting new policy for CPU %u: %u/%u - %u kHz\n",
-		 policy->cpu, pmin, qmin, pmax);
+	pr_debug("setting new policy for CPU %u: %u/%u - %u/%u kHz\n",
+		 policy->cpu, pmin, qmin, pmax, qmax);
 
 	/* clamp the new policy to PM QoS limits */
 	policy->min = max(pmin, qmin);
+	policy->max = min(pmax, qmax);
 
 	memcpy(&policy->cpuinfo, &data->cpuinfo,
 				sizeof(struct cpufreq_cpuinfo));
@@ -1920,12 +1923,16 @@ static int cpu_freq_notify(struct notifier_block *b,
 static struct notifier_block min_freq_notifier = {
 	.notifier_call = cpu_freq_notify,
 };
+static struct notifier_block max_freq_notifier = {
+	.notifier_call = cpu_freq_notify,
+};
 
 static int cpu_freq_notify(struct notifier_block *b,
 			   unsigned long l, void *v)
 {
 	int cpu;
-	pr_debug("PM QoS min %lu\n", l);
+	pr_debug("PM QoS %s %lu\n",
+		 b == &min_freq_notifier ? "min" : "max", l);
 	for_each_online_cpu(cpu) {
 		struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
 		if (policy) {
@@ -1952,6 +1959,9 @@ static int __init cpufreq_core_init(void)
 	rc = pm_qos_add_notifier(PM_QOS_CPU_FREQ_MIN,
 				 &min_freq_notifier);
 	BUG_ON(rc);
+	rc = pm_qos_add_notifier(PM_QOS_CPU_FREQ_MAX,
+				 &max_freq_notifier);
+	BUG_ON(rc);
 
 	return 0;
 }
-- 
1.7.4.1

Re: [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Rafael J. Wysocki]

Hi,

On Monday, January 16, 2012, Antti P Miettinen wrote:
> [did not reach linux-pm as I sent to wrong address, sorry for
> duplicates]
> 
> The inspiration for this patch series is the N9 CPU frequency boost
> upon input events:
> 
> http://www.spinics.net/lists/cpufreq/msg00667.html
> 
> and the related changes in git://codeaurora.org/kernel/msm.git tree.
> Those patches modify the ondemand cpufreq governor. This patch series
> adds minimum and maximum CPU frequency as PM QoS parameters and
> modifies the cpufreq core to enforce the PM QoS limits.

If that hasn't been clear enough so far, I'm still not convinced that using
PM QoS for that is a good idea.

First off, frequency as a unit of throughput is questionable to say the least,
because it isn't portable from one system to another.  Moreover, even on a
given system it isn't particularly clear what the exact correspondence
between frequency and throughput actually is.

Second, it's not particularly clear what the meaning of the "min" frequency
is supposed to be in terms of throughput.

Moreover, you make cpufreq export user_policy.min and user_policy.max
regardless of the new PM QoS parameters, so it looks like you could use those
new attributes to set the min/max as well.

Thanks,
Rafael

Re: [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Antti P Miettinen]

"Rafael J. Wysocki" <rjw@sisk.pl> writes:
> If that hasn't been clear enough so far, I'm still not convinced that using
> PM QoS for that is a good idea.
>
> First off, frequency as a unit of throughput is questionable to say the least,
> because it isn't portable from one system to another.  Moreover, even on a
> given system it isn't particularly clear what the exact correspondence
> between frequency and throughput actually is.
>
> Second, it's not particularly clear what the meaning of the "min" frequency
> is supposed to be in terms of throughput.
>
> Moreover, you make cpufreq export user_policy.min and user_policy.max
> regardless of the new PM QoS parameters, so it looks like you could use those
> new attributes to set the min/max as well.
>
> Thanks,
> Rafael

Thanks - yes - I've understood you are not convinced :-)

Is there any reason why the mapping from application oriented
performance requirement metric to hardware oriented performance setting
metric would need to be inside kernel? As I've said (and Mark Gross
seems to agree) the performance requirements are likely to be system
specific and probably obtained via trial and error or some kind of
adaptive iteration. Wouldn't it be better to leave this complexity
outside PM QoS core or even outside kernel if possible?

The change to cpufreq core just adds two read-only files to be able to
inspect user_policy.min/max in addition to the currently enforced
policy->min/max. Yes - there has been the possibility of using the sysfs
min for setting a frequency floor but this is problematic when there are
multiple clients. You'd need some kind of arbitration and book keeping
to set/restore the minimum. And PM QoS provides exactly this mechanism.

I think the kernel needs to be extended to handle more PM constraints
and PM QoS is the closest thing I know for this kind of
functionality. However, I'm open to suggestions about alternative
approaches. I think we need e.g. more than just min/max "reduction
operators". Ideas, anyone?

	--Antti

RE: [linux-pm] [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Mansoor, Illyas]

> -----Original Message-----
> From: linux-pm-bounces@lists.linux-foundation.org [mailto:linux-pm-
> bounces@lists.linux-foundation.org] On Behalf Of Antti P Miettinen
> Sent: Tuesday, January 17, 2012 11:45 AM
> To: linux-pm@lists.linux-foundation.org
> Cc: cpufreq@vger.kernel.org
> Subject: Re: [linux-pm] [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS
> params
> 
> "Rafael J. Wysocki" <rjw@sisk.pl> writes:
> > If that hasn't been clear enough so far, I'm still not convinced that
> > using PM QoS for that is a good idea.
> >
> > First off, frequency as a unit of throughput is questionable to say
> > the least, because it isn't portable from one system to another.
> > Moreover, even on a given system it isn't particularly clear what the
> > exact correspondence between frequency and throughput actually is.
> >
> > Second, it's not particularly clear what the meaning of the "min"
> > frequency is supposed to be in terms of throughput.
> >
> > Moreover, you make cpufreq export user_policy.min and user_policy.max
> > regardless of the new PM QoS parameters, so it looks like you could
> > use those new attributes to set the min/max as well.
> >
> > Thanks,
> > Rafael
> 
> Thanks - yes - I've understood you are not convinced :-)
> 
> Is there any reason why the mapping from application oriented performance
> requirement metric to hardware oriented performance setting metric would
> need to be inside kernel? As I've said (and Mark Gross seems to agree) the
> performance requirements are likely to be system specific and probably obtained
> via trial and error or some kind of adaptive iteration. Wouldn't it be better to
> leave this complexity outside PM QoS core or even outside kernel if possible?
> 
> The change to cpufreq core just adds two read-only files to be able to inspect
> user_policy.min/max in addition to the currently enforced
> policy->min/max. Yes - there has been the possibility of using the sysfs
> min for setting a frequency floor but this is problematic when there are multiple
> clients. You'd need some kind of arbitration and book keeping to set/restore the
> minimum. And PM QoS provides exactly this mechanism.
> 
> I think the kernel needs to be extended to handle more PM constraints and PM
> QoS is the closest thing I know for this kind of functionality. However, I'm open to
> suggestions about alternative approaches. I think we need e.g. more than just
> min/max "reduction operators". Ideas, anyone?

How about a notion of platform agnostic freq metric that can then me normalized to
The platform available freq's like for example a value 100 that denotes top freq, that
Way PM QoS can then ajust the application requested number to platform available 
Freq.

Just like the On-Demand power_savebias option that uses 0 for the highest freq

-Illyas

Re: [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Antti P Miettinen]

"Mansoor, Illyas" <illyas.mansoor@intel.com> writes:
> How about a notion of platform agnostic freq metric that can then me
> normalized to The platform available freq's like for example a value
> 100 that denotes top freq, that Way PM QoS can then ajust the
> application requested number to platform available Freq.

That will not necessarily help the PM QoS client in choosing the
appropriate performance level. On one platform the appropriate level for
a given situation might be 5% of max, on another 75%. I think the hairy
issue is that there are so many application oriented performance metrics
(MIPS, FLOPS, FPS, milliseconds..).

	--Antti

Re: [linux-pm] [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Rafael J. Wysocki]

On Tuesday, January 17, 2012, Antti P Miettinen wrote:
> "Rafael J. Wysocki" <rjw@sisk.pl> writes:
> > If that hasn't been clear enough so far, I'm still not convinced that using
> > PM QoS for that is a good idea.
> >
> > First off, frequency as a unit of throughput is questionable to say the least,
> > because it isn't portable from one system to another.  Moreover, even on a
> > given system it isn't particularly clear what the exact correspondence
> > between frequency and throughput actually is.
> >
> > Second, it's not particularly clear what the meaning of the "min" frequency
> > is supposed to be in terms of throughput.
> >
> > Moreover, you make cpufreq export user_policy.min and user_policy.max
> > regardless of the new PM QoS parameters, so it looks like you could use those
> > new attributes to set the min/max as well.
> >
> > Thanks,
> > Rafael
> 
> Thanks - yes - I've understood you are not convinced :-)
> 
> Is there any reason why the mapping from application oriented
> performance requirement metric to hardware oriented performance setting
> metric would need to be inside kernel? As I've said (and Mark Gross
> seems to agree) the performance requirements are likely to be system
> specific and probably obtained via trial and error or some kind of
> adaptive iteration. Wouldn't it be better to leave this complexity
> outside PM QoS core or even outside kernel if possible?

If I understand you correctly, you want to have an iterface for specifying
min and max frequencies from user space.  I can understand that.  At least
I can see some use cases for that.

Now, the question is if using the PM QoS framework is the right way to do
that.

> The change to cpufreq core just adds two read-only files to be able to
> inspect user_policy.min/max in addition to the currently enforced
> policy->min/max. Yes - there has been the possibility of using the sysfs
> min for setting a frequency floor but this is problematic when there are
> multiple clients. You'd need some kind of arbitration and book keeping
> to set/restore the minimum. And PM QoS provides exactly this mechanism.

Just as I suspected. :-)

OK, so what's your anticipated usage model of this?

> I think the kernel needs to be extended to handle more PM constraints
> and PM QoS is the closest thing I know for this kind of
> functionality. However, I'm open to suggestions about alternative
> approaches. I think we need e.g. more than just min/max "reduction
> operators". Ideas, anyone?

I first need to know who those multiple clients are going to be.

Thanks,
Rafael

Re: [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Antti P Miettinen]

"Rafael J. Wysocki" <rjw@sisk.pl> writes:
[..]
> If I understand you correctly, you want to have an iterface for specifying
> min and max frequencies from user space.  I can understand that.  At least
> I can see some use cases for that.
>
> Now, the question is if using the PM QoS framework is the right way to do
> that.
>
>> The change to cpufreq core just adds two read-only files to be able to
>> inspect user_policy.min/max in addition to the currently enforced
>> policy->min/max. Yes - there has been the possibility of using the sysfs
>> min for setting a frequency floor but this is problematic when there are
>> multiple clients. You'd need some kind of arbitration and book keeping
>> to set/restore the minimum. And PM QoS provides exactly this mechanism.
>
> Just as I suspected. :-)
>
> OK, so what's your anticipated usage model of this?

We've been experimenting with hooking the frequency boost to e.g. touch
screen UI events and application launch. I believe there are also some
specific applications that would want to either set a frequency floor or
ceiling in some situations.

>> I think the kernel needs to be extended to handle more PM constraints
>> and PM QoS is the closest thing I know for this kind of
>> functionality. However, I'm open to suggestions about alternative
>> approaches. I think we need e.g. more than just min/max "reduction
>> operators". Ideas, anyone?
>
> I first need to know who those multiple clients are going to be.
>
> Thanks,
> Rafael

For the touch screen UI, the boost could be implemented as a kernel
module hooked with suitable event filter to the input event
stream. Another possibility is the UI framework in user space. Some
specific user space applications would also be clients.

	--Antti

Re: [linux-pm] [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Rafael J. Wysocki]

On Wednesday, January 18, 2012, Antti P Miettinen wrote:
> "Rafael J. Wysocki" <rjw@sisk.pl> writes:
> [..]
> > If I understand you correctly, you want to have an iterface for specifying
> > min and max frequencies from user space.  I can understand that.  At least
> > I can see some use cases for that.
> >
> > Now, the question is if using the PM QoS framework is the right way to do
> > that.
> >
> >> The change to cpufreq core just adds two read-only files to be able to
> >> inspect user_policy.min/max in addition to the currently enforced
> >> policy->min/max. Yes - there has been the possibility of using the sysfs
> >> min for setting a frequency floor but this is problematic when there are
> >> multiple clients. You'd need some kind of arbitration and book keeping
> >> to set/restore the minimum. And PM QoS provides exactly this mechanism.
> >
> > Just as I suspected. :-)
> >
> > OK, so what's your anticipated usage model of this?
> 
> We've been experimenting with hooking the frequency boost to e.g. touch
> screen UI events and application launch. I believe there are also some
> specific applications that would want to either set a frequency floor or
> ceiling in some situations.
> 
> >> I think the kernel needs to be extended to handle more PM constraints
> >> and PM QoS is the closest thing I know for this kind of
> >> functionality. However, I'm open to suggestions about alternative
> >> approaches. I think we need e.g. more than just min/max "reduction
> >> operators". Ideas, anyone?
> >
> > I first need to know who those multiple clients are going to be.
> >
> > Thanks,
> > Rafael
> 
> For the touch screen UI, the boost could be implemented as a kernel
> module hooked with suitable event filter to the input event
> stream. Another possibility is the UI framework in user space. Some
> specific user space applications would also be clients.

I see.

However, if you use PM QoS for that as proposed, there will be only one
misc device for the minimum CPU frequency and one for the maximum, so
user space will only be able to specify those numbers globally, ie. for
all CPUs in the system.  Is that your intention?

Rafael

Re: [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Antti P Miettinen]

"Rafael J. Wysocki" <rjw@sisk.pl> writes:
> On Wednesday, January 18, 2012, Antti P Miettinen wrote:
[..]
>> For the touch screen UI, the boost could be implemented as a kernel
>> module hooked with suitable event filter to the input event
>> stream. Another possibility is the UI framework in user space. Some
>> specific user space applications would also be clients.
>
> I see.
>
> However, if you use PM QoS for that as proposed, there will be only one
> misc device for the minimum CPU frequency and one for the maximum, so
> user space will only be able to specify those numbers globally, ie. for
> all CPUs in the system.  Is that your intention?

Yes - global floor/ceiling is what we want for these cases. Resource
specific constraints would be useful also. I guess the device specific
requests could be used for those but I do not have any code related to
this - yet at least :-)

	--Antti

Re: [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[mark gross]

On Mon, Jan 16, 2012 at 10:38:57PM +0100, Rafael J. Wysocki wrote:
> Hi,
> 
> On Monday, January 16, 2012, Antti P Miettinen wrote:
> > [did not reach linux-pm as I sent to wrong address, sorry for
> > duplicates]
> > 
> > The inspiration for this patch series is the N9 CPU frequency boost
> > upon input events:
> > 
> > http://www.spinics.net/lists/cpufreq/msg00667.html
> > 
> > and the related changes in git://codeaurora.org/kernel/msm.git tree.
> > Those patches modify the ondemand cpufreq governor. This patch series
> > adds minimum and maximum CPU frequency as PM QoS parameters and
> > modifies the cpufreq core to enforce the PM QoS limits.
> 
> If that hasn't been clear enough so far, I'm still not convinced that using
> PM QoS for that is a good idea.
> 
> First off, frequency as a unit of throughput is questionable to say the least,
> because it isn't portable from one system to another.  Moreover, even on a
> given system it isn't particularly clear what the exact correspondence
> between frequency and throughput actually is.

You are right.  The notion of throughput of a CPU is really hard to
quantify.  Perhaps not using the term "throughput" would help?

The base issue I see, the Intel platform, is needing is that sometimes
we need to block the lowest P-states that the ondemand governor goes for
because those P-states result in media / graphics workloads dropping
frames.  However; GPU intensive workloads do not stress the CPU so the
ondemand governor goes for the low p-state.

I could use some way of constraining the PM-throttling of the
cpu-freq that can be hit from kernel or user mode.  So the graphics
driver can dynamically adjust the constraint request on the cpufreq
subsystem.

It is problematic that any driver requesting a given frequency request
is not portable across ISA's or even processor families in the same ISA.
But, maybe such a driver should use a module parameter to work around
this lack of portability?

> Second, it's not particularly clear what the meaning of the "min" frequency
> is supposed to be in terms of throughput.

It should mean "please cpufreq do not put the cpu into a state where its
clock runs slower than min".  I don't think we should talk about it as
throughput because thats not what the cpufreq controls.

> 
> Moreover, you make cpufreq export user_policy.min and user_policy.max
> regardless of the new PM QoS parameters, so it looks like you could use those
> new attributes to set the min/max as well.

I'm not a big fan of the cpufreq seamanly redundant export either.
Doesn't the equivalent data get exported under
/sys/devices/system/cpu/cpu?/cpufreq/ ?
 
my 2 cents.

 --mark

Re: [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Antti P Miettinen]

mark gross <markgross@thegnar.org> writes:
> I'm not a big fan of the cpufreq seamanly redundant export either.
> Doesn't the equivalent data get exported under
> /sys/devices/system/cpu/cpu?/cpufreq/ ?

The added sysfs nodes are under /sys/devices/system/cpu/cpu?/cpufreq.
They do no not duplicate functionality, they are just an
addition. Currently you can request a new minimum by writing to
scaling_min_freq and you can view the currently enforced policy->min via
the same file. Patch 3 adds read-only policy_{min,max}_freq nodes for
being able to inspect the user_policy.min/max. This is related to patch
4 which preserves the requested min/max in user_policy instead of
storing the enforced min/max to user_policy. This is in turn related to
patch 5. We need to be able to revert back to requested min/max when PM
QoS constraints get lifted. I think we do not want to overwrite
user_policy min/max with policy->min/max as those values can be affected
by temporary constraints.

I would welcome more comments on patches 3 and 4.

	--Antti

Re: [linux-pm] [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Rafael J. Wysocki]

On Wednesday, January 18, 2012, Antti P Miettinen wrote:
> mark gross <markgross@thegnar.org> writes:
> > I'm not a big fan of the cpufreq seamanly redundant export either.
> > Doesn't the equivalent data get exported under
> > /sys/devices/system/cpu/cpu?/cpufreq/ ?
> 
> The added sysfs nodes are under /sys/devices/system/cpu/cpu?/cpufreq.
> They do no not duplicate functionality, they are just an
> addition.

So please drop them for now.

> Currently you can request a new minimum by writing to
> scaling_min_freq and you can view the currently enforced policy->min via
> the same file. Patch 3 adds read-only policy_{min,max}_freq nodes for
> being able to inspect the user_policy.min/max. This is related to patch
> 4 which preserves the requested min/max in user_policy instead of
> storing the enforced min/max to user_policy. This is in turn related to
> patch 5. We need to be able to revert back to requested min/max when PM
> QoS constraints get lifted. I think we do not want to overwrite
> user_policy min/max with policy->min/max as those values can be affected
> by temporary constraints.
> 
> I would welcome more comments on patches 3 and 4.

I would drop patch 3 and fold patch 4 into patch 5.

Thanks,
Rafael

Re: [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Rafael J. Wysocki]

On Wednesday, January 18, 2012, mark gross wrote:
> On Mon, Jan 16, 2012 at 10:38:57PM +0100, Rafael J. Wysocki wrote:
> > Hi,
> > 
> > On Monday, January 16, 2012, Antti P Miettinen wrote:
> > > [did not reach linux-pm as I sent to wrong address, sorry for
> > > duplicates]
> > > 
> > > The inspiration for this patch series is the N9 CPU frequency boost
> > > upon input events:
> > > 
> > > http://www.spinics.net/lists/cpufreq/msg00667.html
> > > 
> > > and the related changes in git://codeaurora.org/kernel/msm.git tree.
> > > Those patches modify the ondemand cpufreq governor. This patch series
> > > adds minimum and maximum CPU frequency as PM QoS parameters and
> > > modifies the cpufreq core to enforce the PM QoS limits.
> > 
> > If that hasn't been clear enough so far, I'm still not convinced that using
> > PM QoS for that is a good idea.
> > 
> > First off, frequency as a unit of throughput is questionable to say the least,
> > because it isn't portable from one system to another.  Moreover, even on a
> > given system it isn't particularly clear what the exact correspondence
> > between frequency and throughput actually is.
> 
> You are right.  The notion of throughput of a CPU is really hard to
> quantify.  Perhaps not using the term "throughput" would help?

Yes, it would.

> The base issue I see, the Intel platform, is needing is that sometimes
> we need to block the lowest P-states that the ondemand governor goes for
> because those P-states result in media / graphics workloads dropping
> frames.  However; GPU intensive workloads do not stress the CPU so the
> ondemand governor goes for the low p-state.
> 
> I could use some way of constraining the PM-throttling of the
> cpu-freq that can be hit from kernel or user mode.  So the graphics
> driver can dynamically adjust the constraint request on the cpufreq
> subsystem.
> 
> It is problematic that any driver requesting a given frequency request
> is not portable across ISA's or even processor families in the same ISA.
> But, maybe such a driver should use a module parameter to work around
> this lack of portability?

Well, it seems to me that we're trying to add a backdoor to the (apparently
inadequate) governors here.  Arguably, the governors should be able to
make the right decisions on the basis of the information they receive
through their own interfaces.

> > Second, it's not particularly clear what the meaning of the "min" frequency
> > is supposed to be in terms of throughput.
> 
> It should mean "please cpufreq do not put the cpu into a state where its
> clock runs slower than min".  I don't think we should talk about it as
> throughput because thats not what the cpufreq controls.

Perhaps we need a new cpufreq governor that would take use PM QoS internally
to store requests from different sources, but that would work on a per-CPU
basis (not globally) and would provide a new interface for user space?

Rafael

Re: [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Antti P Miettinen]

"Rafael J. Wysocki" <rjw@sisk.pl> writes:
[..]
> Perhaps we need a new cpufreq governor that would take use PM QoS internally
> to store requests from different sources, but that would work on a per-CPU
> basis (not globally) and would provide a new interface for user space?
>
> Rafael

I think it would be nice if the choice of governor could be independent
of the constraints. Also, implementing the constraints in the cpufreq
core is easier than in governors.

	--Antti

Re: [linux-pm] [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Rafael J. Wysocki]

On Thursday, January 19, 2012, Antti P Miettinen wrote:
> "Rafael J. Wysocki" <rjw@sisk.pl> writes:
> [..]
> > Perhaps we need a new cpufreq governor that would take use PM QoS internally
> > to store requests from different sources, but that would work on a per-CPU
> > basis (not globally) and would provide a new interface for user space?
> >
> > Rafael
> 
> I think it would be nice if the choice of governor could be independent
> of the constraints. Also, implementing the constraints in the cpufreq
> core is easier than in governors.

Well, while it might be easier, the _whole_ _point_ of governors is to make
decisions on the basis of available data.  By introducing an independent
mechanism for that we're bypassing governors in a sense.

Thanks,
Rafael

Re: [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Antti P Miettinen]

"Rafael J. Wysocki" <rjw@sisk.pl> writes:
> Well, while it might be easier, the _whole_ _point_ of governors is to make
> decisions on the basis of available data.  By introducing an independent
> mechanism for that we're bypassing governors in a sense.

I see this as modular design: governor defines the overall CPU frequency
control policy and PM QoS defines constraints. I think those things can
and probably should be somewhat independent.

	--Antti

Re: [linux-pm] [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[mark gross]

On Thu, Jan 19, 2012 at 12:24:26AM +0100, Rafael J. Wysocki wrote:
> On Wednesday, January 18, 2012, mark gross wrote:
> > On Mon, Jan 16, 2012 at 10:38:57PM +0100, Rafael J. Wysocki wrote:
> > > Hi,
> > > 
> > > On Monday, January 16, 2012, Antti P Miettinen wrote:
> > > > [did not reach linux-pm as I sent to wrong address, sorry for
> > > > duplicates]
> > > > 
> > > > The inspiration for this patch series is the N9 CPU frequency boost
> > > > upon input events:
> > > > 
> > > > http://www.spinics.net/lists/cpufreq/msg00667.html
> > > > 
> > > > and the related changes in git://codeaurora.org/kernel/msm.git tree.
> > > > Those patches modify the ondemand cpufreq governor. This patch series
> > > > adds minimum and maximum CPU frequency as PM QoS parameters and
> > > > modifies the cpufreq core to enforce the PM QoS limits.
> > > 
> > > If that hasn't been clear enough so far, I'm still not convinced that using
> > > PM QoS for that is a good idea.
> > > 
> > > First off, frequency as a unit of throughput is questionable to say the least,
> > > because it isn't portable from one system to another.  Moreover, even on a
> > > given system it isn't particularly clear what the exact correspondence
> > > between frequency and throughput actually is.
> > 
> > You are right.  The notion of throughput of a CPU is really hard to
> > quantify.  Perhaps not using the term "throughput" would help?
> 
> Yes, it would.
> 
> > The base issue I see, the Intel platform, is needing is that sometimes
> > we need to block the lowest P-states that the ondemand governor goes for
> > because those P-states result in media / graphics workloads dropping
> > frames.  However; GPU intensive workloads do not stress the CPU so the
> > ondemand governor goes for the low p-state.
> > 
> > I could use some way of constraining the PM-throttling of the
> > cpu-freq that can be hit from kernel or user mode.  So the graphics
> > driver can dynamically adjust the constraint request on the cpufreq
> > subsystem.
> > 
> > It is problematic that any driver requesting a given frequency request
> > is not portable across ISA's or even processor families in the same ISA.
> > But, maybe such a driver should use a module parameter to work around
> > this lack of portability?
> 
> Well, it seems to me that we're trying to add a backdoor to the (apparently
> inadequate) governors here.  Arguably, the governors should be able to
> make the right decisions on the basis of the information they receive
> through their own interfaces.

the failings of governors to have the information needed is why pm_qos
was created in the first place.  It can be seen as a limitation on the
governor from some perspectives.  But, I like to think of if as updating
existing governors to account for new use case requirements as hardware
get bigger power management / performance dynamic ranges.


> > > Second, it's not particularly clear what the meaning of the "min" frequency
> > > is supposed to be in terms of throughput.
> > 
> > It should mean "please cpufreq do not put the cpu into a state where its
> > clock runs slower than min".  I don't think we should talk about it as
> > throughput because thats not what the cpufreq controls.
> 
> Perhaps we need a new cpufreq governor that would take use PM QoS internally
> to store requests from different sources, but that would work on a per-CPU
> basis (not globally) and would provide a new interface for user space?
> 

I don' think we need a new cpufreq governor, the parts of this patchset
that I agree with evolve the governor to account for pm-qos requests
but, globally for all cpu's.

Hmm, your right this patch set is global in its request and not
"per-cpu".  I need to think on that.  Making it per-cpu would likely
infer we need to make the qos request per cpu as well.  

Do you think it needs to be per-cpu?  (I'm starting to think "yes" it
does)

How do we scale the pm_qos ABI to support per/cpu?  (maybe we don't
export those types of qos classes to the user mode?)

--mark

Re: [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Antti P Miettinen]

mark gross <markgross@thegnar.org> writes:
> Hmm, your right this patch set is global in its request and not
> "per-cpu".  I need to think on that.  Making it per-cpu would likely
> infer we need to make the qos request per cpu as well.  

I think we need both, global and per cpu.

	--Antti

Re: [linux-pm] [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Rafael J. Wysocki]

On Thursday, January 19, 2012, Antti P Miettinen wrote:
> mark gross <markgross@thegnar.org> writes:
> > Hmm, your right this patch set is global in its request and not
> > "per-cpu".  I need to think on that.  Making it per-cpu would likely
> > infer we need to make the qos request per cpu as well.  
> 
> I think we need both, global and per cpu.

Well, if we have that per CPU, it will be easy to create a global
setting: set all of the per-CPU settings to the same values. :-)

Thanks,
Rafael

Re: [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Antti P Miettinen]

"Rafael J. Wysocki" <rjw@sisk.pl> writes:
> On Thursday, January 19, 2012, Antti P Miettinen wrote:
>> I think we need both, global and per cpu.
>
> Well, if we have that per CPU, it will be easy to create a global
> setting: set all of the per-CPU settings to the same values. :-)

That is true. Currently the device specific constraints do not have user
space interface. The pm_qos_interface.txt refers to ongoing
discussion. Is there a thread I should read?

Seems that the device specific constraints are not yet in use in
3.3-rc1, or am I not looking hard enough?

	--Antti

Re: [linux-pm] [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Rafael J. Wysocki]

On Sunday, January 22, 2012, Antti P Miettinen wrote:
> "Rafael J. Wysocki" <rjw@sisk.pl> writes:
> > On Thursday, January 19, 2012, Antti P Miettinen wrote:
> >> I think we need both, global and per cpu.
> >
> > Well, if we have that per CPU, it will be easy to create a global
> > setting: set all of the per-CPU settings to the same values. :-)
> 
> That is true. Currently the device specific constraints do not have user
> space interface. The pm_qos_interface.txt refers to ongoing
> discussion. Is there a thread I should read?
> 
> Seems that the device specific constraints are not yet in use in
> 3.3-rc1, or am I not looking hard enough?

They are in use through generic PM domains (drivers/base/power/domain*.c
and friends) and ARM/shmobile uses those.

Thanks,
Rafael

Re: [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Antti P Miettinen]

"Rafael J. Wysocki" <rjw@sisk.pl> writes:
> On Sunday, January 22, 2012, Antti P Miettinen wrote:
[..]
>> Seems that the device specific constraints are not yet in use in
>> 3.3-rc1, or am I not looking hard enough?
>
> They are in use through generic PM domains (drivers/base/power/domain*.c
> and friends) and ARM/shmobile uses those.
>
> Thanks,
> Rafael

Sorry for the delay - got pre-empted by other stuff. I took a look at
the per device constraints. Do I understand it correctly that the idea
is that there is only one constraint per device? If we want to make
frequency and latency per CPU I guess we'd need separate constraints
associated with the CPU device. Or do I misunderstand something?

Or would global CPU frequency be more in line with global CPU latency
after all?

	--Antti

Per CPU frequency constraints (was Re: [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params)

[Antti P Miettinen]

Antti P Miettinen <amiettinen@nvidia.com> writes:
> "Rafael J. Wysocki" <rjw@sisk.pl> writes:
>> On Sunday, January 22, 2012, Antti P Miettinen wrote:
> [..]
>>> Seems that the device specific constraints are not yet in use in
>>> 3.3-rc1, or am I not looking hard enough?
>>
>> They are in use through generic PM domains (drivers/base/power/domain*.c
>> and friends) and ARM/shmobile uses those.
>>
>> Thanks,
>> Rafael
>
> Sorry for the delay - got pre-empted by other stuff. I took a look at
> the per device constraints. Do I understand it correctly that the idea
> is that there is only one constraint per device? If we want to make
> frequency and latency per CPU I guess we'd need separate constraints
> associated with the CPU device. Or do I misunderstand something?
>
> Or would global CPU frequency be more in line with global CPU latency
> after all?
>
> 	--Antti

Ok - here's something - try not to laugh too hard. It's not pretty but
should serve as something for discussion the issues. This is on top of
the v3 patch series, against linus/master (3.3-rc2+). Previously I did
not CC people in my followups, I only posted to the lists. This was
probably wrong - sorry about that. This time I'm CCing people - if you
do not want to be CCd, please tell me. If you want this in some other
form (just a big patch with the previous series?), please tell me.

Anyway - does anyone have good solutions to the below issues? In general
- is per CPU worth the trouble?

1. Per device request ID space

Should each device have it's own ID space? I changed the one (implicitly
"latency") constraint to an array. But not all requests are relevant for
all devices so we waste some space. Is this an issue?

2. Systems with large number of processors

Dynamic minors for misc devices run out for those. Also the
pm_qos_object array is large for such systems. Also, hotpluggable CPUs
are kind of an issue. My laptop has possible-mask of 16 CPUs even though
I will never plug more CPUs to this system - at least not at
runtime. Also having a file handle per QoS request feels a bit
excessive. Can we require the data via the file handle to be more
structured line dev+id+value? Would require more elaborate book keeping
to clean up upon file close. Some better solution for the user space
interface?

3. Normal pm_qos_request vs dev_pm_qos_request

Maybe some refactoring could minimize the acrobatics related to the
function pointers and stuff I added to pm_qos_object.

And, yes, general cleanup and splitting to coherent changes would
definitely be required but I wanted to get opinions about what direction
to go with this.

	--Antti

From: Antti P Miettinen <amiettinen@nvidia.com>
Date: Tue, 7 Feb 2012 15:20:15 +0200
Subject: [PATCH] cpufreq: PM QoS: Per CPU frequency constraints

Change frequency minimum and maximum into per device
constraints.

Signed-off-by: Antti P Miettinen <amiettinen@nvidia.com>
---
 drivers/base/power/qos.c           |  121 +++++++++++++++++++---------
 drivers/base/power/runtime.c       |    2 +-
 drivers/cpufreq/cpufreq.c          |  132 ++++++++++++++++++++++++++----
 drivers/input/input-cfboost.c      |   29 ++++++--
 drivers/input/touchscreen/st1232.c |    3 +-
 include/linux/pm_qos.h             |   51 ++++++++++---
 kernel/power/qos.c                 |  155 ++++++++++++++++++++----------------
 7 files changed, 350 insertions(+), 143 deletions(-)

diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c
index c5d3588..325930b 100644
--- a/drivers/base/power/qos.c
+++ b/drivers/base/power/qos.c
@@ -44,7 +44,23 @@
 
 static DEFINE_MUTEX(dev_pm_qos_mtx);
 
-static BLOCKING_NOTIFIER_HEAD(dev_pm_notifiers);
+static const s32 pm_qos_dev_default[] = {
+	PM_QOS_DEV_LAT_DEFAULT_VALUE,
+	PM_QOS_CPU_FREQ_MIN_DEFAULT_VALUE,
+	PM_QOS_CPU_FREQ_MAX_DEFAULT_VALUE,
+};
+
+static const s32 pm_qos_dev_type[] = {
+	PM_QOS_MIN,
+	PM_QOS_MAX,
+	PM_QOS_MIN,
+};
+
+static struct blocking_notifier_head dev_pm_notifiers[] = {
+	BLOCKING_NOTIFIER_INIT(dev_pm_notifiers[0]),
+	BLOCKING_NOTIFIER_INIT(dev_pm_notifiers[1]),
+	BLOCKING_NOTIFIER_INIT(dev_pm_notifiers[2]),
+};
 
 /**
  * __dev_pm_qos_read_value - Get PM QoS constraint for a given device.
@@ -52,24 +68,24 @@ static BLOCKING_NOTIFIER_HEAD(dev_pm_notifiers);
  *
  * This routine must be called with dev->power.lock held.
  */
-s32 __dev_pm_qos_read_value(struct device *dev)
+s32 __dev_pm_qos_read_value(struct device *dev, int id)
 {
 	struct pm_qos_constraints *c = dev->power.constraints;
-
-	return c ? pm_qos_read_value(c) : 0;
+	BUG_ON(id >= PM_QOS_DEV_NUM_CLASSES);
+	return c ? pm_qos_read_value(&c[id]) : pm_qos_dev_default[id];
 }
 
 /**
  * dev_pm_qos_read_value - Get PM QoS constraint for a given device (locked).
  * @dev: Device to get the PM QoS constraint value for.
  */
-s32 dev_pm_qos_read_value(struct device *dev)
+s32 dev_pm_qos_read_value(struct device *dev, int id)
 {
 	unsigned long flags;
 	s32 ret;
 
 	spin_lock_irqsave(&dev->power.lock, flags);
-	ret = __dev_pm_qos_read_value(dev);
+	ret = __dev_pm_qos_read_value(dev, id);
 	spin_unlock_irqrestore(&dev->power.lock, flags);
 
 	return ret;
@@ -89,14 +105,16 @@ static int apply_constraint(struct dev_pm_qos_request *req,
 			    enum pm_qos_req_action action, int value)
 {
 	int ret, curr_value;
+	struct pm_qos_constraints *c;
 
-	ret = pm_qos_update_target(req->dev->power.constraints,
+	c = &req->dev->power.constraints[req->dev_class];
+	ret = pm_qos_update_target(c,
 				   &req->node, action, value);
 
 	if (ret) {
 		/* Call the global callbacks if needed */
-		curr_value = pm_qos_read_value(req->dev->power.constraints);
-		blocking_notifier_call_chain(&dev_pm_notifiers,
+		curr_value = pm_qos_read_value(c);
+		blocking_notifier_call_chain(&dev_pm_notifiers[req->dev_class],
 					     (unsigned long)curr_value,
 					     req);
 	}
@@ -105,33 +123,38 @@ static int apply_constraint(struct dev_pm_qos_request *req,
 }
 
 /*
- * dev_pm_qos_constraints_allocate
+ * __dev_pm_qos_constraints_allocate
  * @dev: device to allocate data for
  *
  * Called at the first call to add_request, for constraint data allocation
  * Must be called with the dev_pm_qos_mtx mutex held
  */
-static int dev_pm_qos_constraints_allocate(struct device *dev)
+static int __dev_pm_qos_constraints_allocate(struct device *dev)
 {
 	struct pm_qos_constraints *c;
 	struct blocking_notifier_head *n;
+	int i;
 
-	c = kzalloc(sizeof(*c), GFP_KERNEL);
+	c = kzalloc(sizeof(*c) * PM_QOS_DEV_NUM_CLASSES, GFP_KERNEL);
 	if (!c)
 		return -ENOMEM;
 
-	n = kzalloc(sizeof(*n), GFP_KERNEL);
+	n = kzalloc(sizeof(*n) * PM_QOS_DEV_NUM_CLASSES, GFP_KERNEL);
 	if (!n) {
 		kfree(c);
 		return -ENOMEM;
 	}
-	BLOCKING_INIT_NOTIFIER_HEAD(n);
 
-	plist_head_init(&c->list);
-	c->target_value = PM_QOS_DEV_LAT_DEFAULT_VALUE;
-	c->default_value = PM_QOS_DEV_LAT_DEFAULT_VALUE;
-	c->type = PM_QOS_MIN;
-	c->notifiers = n;
+	for (i = 0; i < PM_QOS_DEV_NUM_CLASSES; ++i) {
+		BLOCKING_INIT_NOTIFIER_HEAD(&n[i]);
+
+		plist_head_init(&c[i].list);
+		c[i].target_value = pm_qos_dev_default[i];
+		c[i].default_value = pm_qos_dev_default[i];
+		c[i].type = pm_qos_dev_type[i];
+		c[i].notifiers = &n[i];
+
+	}
 
 	spin_lock_irq(&dev->power.lock);
 	dev->power.constraints = c;
@@ -140,6 +163,16 @@ static int dev_pm_qos_constraints_allocate(struct device *dev)
 	return 0;
 }
 
+int dev_pm_qos_constraints_allocate(struct device *dev)
+{
+	int ret;
+	mutex_lock(&dev_pm_qos_mtx);
+	ret = __dev_pm_qos_constraints_allocate(dev);
+	mutex_unlock(&dev_pm_qos_mtx);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_constraints_allocate);
+
 /**
  * dev_pm_qos_constraints_init - Initalize device's PM QoS constraints pointer.
  * @dev: target device
@@ -165,6 +198,7 @@ void dev_pm_qos_constraints_destroy(struct device *dev)
 {
 	struct dev_pm_qos_request *req, *tmp;
 	struct pm_qos_constraints *c;
+	int i;
 
 	mutex_lock(&dev_pm_qos_mtx);
 
@@ -173,21 +207,25 @@ void dev_pm_qos_constraints_destroy(struct device *dev)
 	if (!c)
 		goto out;
 
-	/* Flush the constraints list for the device */
-	plist_for_each_entry_safe(req, tmp, &c->list, node) {
-		/*
-		 * Update constraints list and call the notification
-		 * callbacks if needed
-		 */
-		apply_constraint(req, PM_QOS_REMOVE_REQ, PM_QOS_DEFAULT_VALUE);
-		memset(req, 0, sizeof(*req));
+	for (i = 0; i < PM_QOS_DEV_NUM_CLASSES; ++i) {
+		c = &dev->power.constraints[i];
+		/* Flush the constraints list for the device */
+		plist_for_each_entry_safe(req, tmp, &c->list, node) {
+			/*
+			 * Update constraints list and call the notification
+			 * callbacks if needed
+			 */
+			apply_constraint(req, PM_QOS_REMOVE_REQ,
+					 PM_QOS_DEFAULT_VALUE);
+			memset(req, 0, sizeof(*req));
+		}
 	}
 
 	spin_lock_irq(&dev->power.lock);
 	dev->power.constraints = NULL;
 	spin_unlock_irq(&dev->power.lock);
 
-	kfree(c->notifiers);
+	kfree(c[0].notifiers);
 	kfree(c);
 
  out:
@@ -213,7 +251,7 @@ void dev_pm_qos_constraints_destroy(struct device *dev)
  * from the system.
  */
 int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
-			   s32 value)
+			   int id, s32 value)
 {
 	int ret = 0;
 
@@ -225,6 +263,7 @@ int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
 		return -EINVAL;
 
 	req->dev = dev;
+	req->dev_class = id;
 
 	mutex_lock(&dev_pm_qos_mtx);
 
@@ -346,7 +385,8 @@ EXPORT_SYMBOL_GPL(dev_pm_qos_remove_request);
  * Will register the notifier into a notification chain that gets called
  * upon changes to the target value for the device.
  */
-int dev_pm_qos_add_notifier(struct device *dev, struct notifier_block *notifier)
+int dev_pm_qos_add_notifier(struct device *dev, int id,
+			    struct notifier_block *notifier)
 {
 	int retval = 0;
 
@@ -355,7 +395,7 @@ int dev_pm_qos_add_notifier(struct device *dev, struct notifier_block *notifier)
 	/* Silently return if the constraints object is not present. */
 	if (dev->power.constraints)
 		retval = blocking_notifier_chain_register(
-				dev->power.constraints->notifiers,
+				dev->power.constraints[id].notifiers,
 				notifier);
 
 	mutex_unlock(&dev_pm_qos_mtx);
@@ -373,7 +413,7 @@ EXPORT_SYMBOL_GPL(dev_pm_qos_add_notifier);
  * Will remove the notifier from the notification chain that gets called
  * upon changes to the target value.
  */
-int dev_pm_qos_remove_notifier(struct device *dev,
+int dev_pm_qos_remove_notifier(struct device *dev, int id,
 			       struct notifier_block *notifier)
 {
 	int retval = 0;
@@ -383,7 +423,7 @@ int dev_pm_qos_remove_notifier(struct device *dev,
 	/* Silently return if the constraints object is not present. */
 	if (dev->power.constraints)
 		retval = blocking_notifier_chain_unregister(
-				dev->power.constraints->notifiers,
+				dev->power.constraints[id].notifiers,
 				notifier);
 
 	mutex_unlock(&dev_pm_qos_mtx);
@@ -400,9 +440,10 @@ EXPORT_SYMBOL_GPL(dev_pm_qos_remove_notifier);
  * Will register the notifier into a notification chain that gets called
  * upon changes to the target value for any device.
  */
-int dev_pm_qos_add_global_notifier(struct notifier_block *notifier)
+int dev_pm_qos_add_global_notifier(struct notifier_block *notifier, int id)
 {
-	return blocking_notifier_chain_register(&dev_pm_notifiers, notifier);
+	return blocking_notifier_chain_register(&dev_pm_notifiers[id],
+						notifier);
 }
 EXPORT_SYMBOL_GPL(dev_pm_qos_add_global_notifier);
 
@@ -415,9 +456,10 @@ EXPORT_SYMBOL_GPL(dev_pm_qos_add_global_notifier);
  * Will remove the notifier from the notification chain that gets called
  * upon changes to the target value for any device.
  */
-int dev_pm_qos_remove_global_notifier(struct notifier_block *notifier)
+int dev_pm_qos_remove_global_notifier(struct notifier_block *notifier, int id)
 {
-	return blocking_notifier_chain_unregister(&dev_pm_notifiers, notifier);
+	return blocking_notifier_chain_unregister(&dev_pm_notifiers[id],
+						  notifier);
 }
 EXPORT_SYMBOL_GPL(dev_pm_qos_remove_global_notifier);
 
@@ -428,7 +470,8 @@ EXPORT_SYMBOL_GPL(dev_pm_qos_remove_global_notifier);
  * @value: Constraint latency value.
  */
 int dev_pm_qos_add_ancestor_request(struct device *dev,
-				    struct dev_pm_qos_request *req, s32 value)
+				    struct dev_pm_qos_request *req,
+				    int id, s32 value)
 {
 	struct device *ancestor = dev->parent;
 	int error = -ENODEV;
@@ -437,7 +480,7 @@ int dev_pm_qos_add_ancestor_request(struct device *dev,
 		ancestor = ancestor->parent;
 
 	if (ancestor)
-		error = dev_pm_qos_add_request(ancestor, req, value);
+		error = dev_pm_qos_add_request(ancestor, req, id, value);
 
 	if (error)
 		req->dev = NULL;
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 541f821..cc424bc 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -445,7 +445,7 @@ static int rpm_suspend(struct device *dev, int rpmflags)
 		goto out;
 	}
 
-	qos.constraint_ns = __dev_pm_qos_read_value(dev);
+	qos.constraint_ns = __dev_pm_qos_read_value(dev, PM_QOS_DEV_LATENCY);
 	if (qos.constraint_ns < 0) {
 		/* Negative constraint means "never suspend". */
 		retval = -EPERM;
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index d233a8b..89c61ba 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1634,11 +1634,14 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 				struct cpufreq_policy *policy)
 {
 	int ret = 0;
+	struct device *dev = get_cpu_device(policy->cpu);
 	unsigned int pmin = policy->min;
 	unsigned int pmax = policy->max;
-	unsigned int qmin = min(pm_qos_request(PM_QOS_CPU_FREQ_MIN),
+	unsigned int qmin = min(dev_pm_qos_read_value(dev,
+						      PM_QOS_CPU_FREQ_MIN),
 				data->max);
-	unsigned int qmax = max(pm_qos_request(PM_QOS_CPU_FREQ_MAX),
+	unsigned int qmax = max(dev_pm_qos_read_value(dev,
+						      PM_QOS_CPU_FREQ_MAX),
 				data->min);
 
 	pr_debug("setting new policy for CPU %u: %u/%u - %u/%u kHz\n",
@@ -1930,23 +1933,22 @@ static struct notifier_block max_freq_notifier = {
 static int cpu_freq_notify(struct notifier_block *b,
 			   unsigned long l, void *v)
 {
-	int cpu;
-	pr_debug("PM QoS %s %lu\n",
-		 b == &min_freq_notifier ? "min" : "max", l);
-	for_each_online_cpu(cpu) {
-		struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
-		if (policy) {
-			cpufreq_update_policy(policy->cpu);
-			cpufreq_cpu_put(policy);
-		}
+	struct dev_pm_qos_request *req = v;
+	int cpu = req->dev->id;
+	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+	pr_debug("CPU%d PM QoS %s: %lu\n",
+		 cpu, b == &min_freq_notifier ? "min" : "max", l);
+	if (policy) {
+		cpufreq_update_policy(policy->cpu);
+		cpufreq_cpu_put(policy);
 	}
+
 	return NOTIFY_OK;
 }
 
 static int __init cpufreq_core_init(void)
 {
 	int cpu;
-	int rc;
 
 	for_each_possible_cpu(cpu) {
 		per_cpu(cpufreq_policy_cpu, cpu) = -1;
@@ -1956,13 +1958,107 @@ static int __init cpufreq_core_init(void)
 	cpufreq_global_kobject = kobject_create_and_add("cpufreq", &cpu_subsys.dev_root->kobj);
 	BUG_ON(!cpufreq_global_kobject);
 	register_syscore_ops(&cpufreq_syscore_ops);
-	rc = pm_qos_add_notifier(PM_QOS_CPU_FREQ_MIN,
-				 &min_freq_notifier);
-	BUG_ON(rc);
-	rc = pm_qos_add_notifier(PM_QOS_CPU_FREQ_MAX,
-				 &max_freq_notifier);
-	BUG_ON(rc);
 
 	return 0;
 }
 core_initcall(cpufreq_core_init);
+
+struct cpufreq_pm_qos {
+	struct pm_qos_object obj_min;
+	struct pm_qos_object obj_max;
+	char name_min[32];
+	char name_max[32];
+};
+static DEFINE_PER_CPU(struct cpufreq_pm_qos, cf_pq);
+
+static void *pm_qos_cpu_add(void *p)
+{
+	struct pm_qos_object *o = p;
+	struct dev_pm_qos_request *req = kzalloc(sizeof(*req), GFP_KERNEL);
+	struct device *dev = o->data;
+	BUG_ON(!dev);
+	if (!req)
+		return 0;
+	dev_pm_qos_add_request(dev, req, o->pm_qos_dev_class,
+			       PM_QOS_DEFAULT_VALUE);
+	return req;
+}
+
+static s32 pm_qos_cpu_read(void *p)
+{
+	struct pm_qos_object *o = p;
+	struct device *dev = o->data;
+	BUG_ON(!dev);
+	return dev_pm_qos_read_value(dev, o->pm_qos_dev_class);
+}
+
+static void pm_qos_cpu_write(void *p, s32 value)
+{
+	struct pm_qos_object *o = p;
+	struct dev_pm_qos_request *req = o->req;
+	dev_pm_qos_update_request(req, value);
+}
+
+static void pm_qos_cpu_remove(void *p)
+{
+	struct pm_qos_object *o = p;
+	struct dev_pm_qos_request *req = o->req;
+	dev_pm_qos_remove_request(req);
+	kfree(req);
+	o->req = 0;
+}
+
+static int __init cpufreq_pm_qos_init(void)
+{
+	int cpu;
+	int rc;
+
+	for_each_possible_cpu(cpu) {
+		struct device *dev = get_cpu_device(cpu);
+		if (!dev) {
+			pr_info("CPU%d: skipping\n", cpu);
+			continue;
+		}
+		rc = dev_pm_qos_constraints_allocate(dev);
+		BUG_ON(rc);
+		/* register interface for min freq */
+		sprintf(per_cpu(cf_pq, cpu).name_min, "cpu%d_freq_min", cpu);
+		per_cpu(cf_pq, cpu).obj_min.name
+			= per_cpu(cf_pq, cpu).name_min;
+		per_cpu(cf_pq, cpu).obj_min.constraints =
+			&dev->power.constraints[PM_QOS_CPU_FREQ_MIN];
+		per_cpu(cf_pq, cpu).obj_min.add = pm_qos_cpu_add;
+		per_cpu(cf_pq, cpu).obj_min.read = pm_qos_cpu_read;
+		per_cpu(cf_pq, cpu).obj_min.write = pm_qos_cpu_write;
+		per_cpu(cf_pq, cpu).obj_min.remove = pm_qos_cpu_remove;
+		per_cpu(cf_pq, cpu).obj_min.data = dev;
+		per_cpu(cf_pq, cpu).obj_min.pm_qos_dev_class
+			= PM_QOS_CPU_FREQ_MIN;
+		rc = pm_qos_register_misc(&per_cpu(cf_pq, cpu).obj_min);
+		BUG_ON(rc);
+		/* register interface for max freq */
+		sprintf(per_cpu(cf_pq, cpu).name_max, "cpu%d_freq_max", cpu);
+		per_cpu(cf_pq, cpu).obj_max.constraints =
+			&dev->power.constraints[PM_QOS_CPU_FREQ_MAX];
+		per_cpu(cf_pq, cpu).obj_max.name
+			= per_cpu(cf_pq, cpu).name_max;
+		per_cpu(cf_pq, cpu).obj_max.add = pm_qos_cpu_add;
+		per_cpu(cf_pq, cpu).obj_max.read = pm_qos_cpu_read;
+		per_cpu(cf_pq, cpu).obj_max.write = pm_qos_cpu_write;
+		per_cpu(cf_pq, cpu).obj_max.remove = pm_qos_cpu_remove;
+		per_cpu(cf_pq, cpu).obj_max.data = dev;
+		per_cpu(cf_pq, cpu).obj_max.pm_qos_dev_class
+			= PM_QOS_CPU_FREQ_MAX;
+		rc = pm_qos_register_misc(&per_cpu(cf_pq, cpu).obj_max);
+		BUG_ON(rc);
+		rc = dev_pm_qos_add_notifier(dev, PM_QOS_CPU_FREQ_MIN,
+					     &min_freq_notifier);
+		BUG_ON(rc);
+		rc = dev_pm_qos_add_notifier(dev, PM_QOS_CPU_FREQ_MAX,
+					     &max_freq_notifier);
+		BUG_ON(rc);
+	}
+
+	return 0;
+}
+late_initcall(cpufreq_pm_qos_init);
diff --git a/drivers/input/input-cfboost.c b/drivers/input/input-cfboost.c
index bef3ec5..52f0a38 100644
--- a/drivers/input/input-cfboost.c
+++ b/drivers/input/input-cfboost.c
@@ -25,6 +25,7 @@
 #include <linux/input.h>
 #include <linux/module.h>
 #include <linux/pm_qos.h>
+#include <linux/cpu.h>
 
 /* This module listens to input events and sets a temporary frequency
  * floor upon input event detection. This is based on changes to
@@ -48,7 +49,7 @@ MODULE_DESCRIPTION("Input event CPU frequency booster");
 MODULE_LICENSE("GPL v2");
 
 
-static struct pm_qos_request qos_req;
+static DEFINE_PER_CPU(struct dev_pm_qos_request, qos_req);
 static struct work_struct boost;
 static struct delayed_work unboost;
 static unsigned int boost_freq; /* kHz */
@@ -59,14 +60,21 @@ static struct workqueue_struct *cfb_wq;
 
 static void cfb_boost(struct work_struct *w)
 {
+	int cpu;
 	cancel_delayed_work_sync(&unboost);
-	pm_qos_update_request(&qos_req, boost_freq);
+	for_each_online_cpu(cpu) {
+		dev_pm_qos_update_request(&per_cpu(qos_req, cpu), boost_freq);
+	}
 	queue_delayed_work(cfb_wq, &unboost, msecs_to_jiffies(boost_time));
 }
 
 static void cfb_unboost(struct work_struct *w)
 {
-	pm_qos_update_request(&qos_req, PM_QOS_DEFAULT_VALUE);
+	int cpu;
+	for_each_online_cpu(cpu) {
+		dev_pm_qos_update_request(&per_cpu(qos_req, cpu),
+					  PM_QOS_DEFAULT_VALUE);
+	}
 }
 
 static void cfb_input_event(struct input_handle *handle, unsigned int type,
@@ -142,6 +150,7 @@ static struct input_handler cfb_input_handler = {
 static int __init cfboost_init(void)
 {
 	int ret;
+	int cpu;
 
 	cfb_wq = create_workqueue("icfb-wq");
 	if (!cfb_wq)
@@ -153,13 +162,19 @@ static int __init cfboost_init(void)
 		destroy_workqueue(cfb_wq);
 		return ret;
 	}
-	pm_qos_add_request(&qos_req, PM_QOS_CPU_FREQ_MIN,
-			   PM_QOS_DEFAULT_VALUE);
+	for_each_possible_cpu(cpu) {
+		struct device *dev = get_cpu_device(cpu);
+		dev_pm_qos_add_request(dev, &per_cpu(qos_req, cpu),
+				       PM_QOS_CPU_FREQ_MIN,
+				       PM_QOS_DEFAULT_VALUE);
+	}
 	return 0;
 }
 
 static void __exit cfboost_exit(void)
 {
+	int cpu;
+
 	/* stop input events */
 	input_unregister_handler(&cfb_input_handler);
 	/* cancel pending work requests */
@@ -167,7 +182,9 @@ static void __exit cfboost_exit(void)
 	cancel_delayed_work_sync(&unboost);
 	/* clean up */
 	destroy_workqueue(cfb_wq);
-	pm_qos_remove_request(&qos_req);
+	for_each_possible_cpu(cpu) {
+		dev_pm_qos_remove_request(&per_cpu(qos_req, cpu));
+	}
 }
 
 module_init(cfboost_init);
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index 8825fe3..9f68c98 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -129,7 +129,8 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
 	} else if (!ts->low_latency_req.dev) {
 		/* First contact, request 100 us latency. */
 		dev_pm_qos_add_ancestor_request(&ts->client->dev,
-						&ts->low_latency_req, 100);
+						&ts->low_latency_req,
+						PM_QOS_DEV_LATENCY, 100);
 	}
 
 	/* SYN_REPORT */
diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h
index fedda35..843dc22 100644
--- a/include/linux/pm_qos.h
+++ b/include/linux/pm_qos.h
@@ -9,19 +9,27 @@
 #include <linux/miscdevice.h>
 #include <linux/device.h>
 
+/* Global */
 enum {
 	PM_QOS_RESERVED = 0,
 	PM_QOS_CPU_DMA_LATENCY,
 	PM_QOS_NETWORK_LATENCY,
 	PM_QOS_NETWORK_THROUGHPUT,
-	PM_QOS_CPU_FREQ_MIN,
-	PM_QOS_CPU_FREQ_MAX,
 
 	/* insert new class ID */
 
 	PM_QOS_NUM_CLASSES,
 };
 
+/* Per device */
+enum {
+	PM_QOS_DEV_LATENCY,
+	PM_QOS_CPU_FREQ_MIN,
+	PM_QOS_CPU_FREQ_MAX,
+
+	PM_QOS_DEV_NUM_CLASSES,
+};
+
 #define PM_QOS_DEFAULT_VALUE -1
 
 #define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE	(2000 * USEC_PER_SEC)
@@ -39,6 +47,8 @@ struct pm_qos_request {
 struct dev_pm_qos_request {
 	struct plist_node node;
 	struct device *dev;
+	int dev_class;
+	int pm_qos_class;
 };
 
 enum pm_qos_type {
@@ -67,6 +77,20 @@ enum pm_qos_req_action {
 	PM_QOS_REMOVE_REQ	/* Remove an existing request */
 };
 
+struct pm_qos_object {
+	struct pm_qos_constraints *constraints;
+	struct miscdevice pm_qos_power_miscdev;
+	char *name;
+	int pm_qos_class;
+	int pm_qos_dev_class;
+	void *data;
+	void *req;
+	void *(*add)(void *);
+	s32 (*read)(void *);
+	void (*write)(void *, s32);
+	void (*remove)(void *);
+};
+
 static inline int dev_pm_qos_request_active(struct dev_pm_qos_request *req)
 {
 	return req->dev != 0;
@@ -84,25 +108,28 @@ void pm_qos_remove_request(struct pm_qos_request *req);
 int pm_qos_request(int pm_qos_class);
 int pm_qos_add_notifier(int pm_qos_class, struct notifier_block *notifier);
 int pm_qos_remove_notifier(int pm_qos_class, struct notifier_block *notifier);
+int pm_qos_register_misc(struct pm_qos_object *qos);
 int pm_qos_request_active(struct pm_qos_request *req);
 s32 pm_qos_read_value(struct pm_qos_constraints *c);
 
-s32 __dev_pm_qos_read_value(struct device *dev);
-s32 dev_pm_qos_read_value(struct device *dev);
+s32 __dev_pm_qos_read_value(struct device *dev, int id);
+s32 dev_pm_qos_read_value(struct device *dev, int id);
 int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
-			   s32 value);
+			   int id, s32 value);
 int dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value);
 int dev_pm_qos_remove_request(struct dev_pm_qos_request *req);
-int dev_pm_qos_add_notifier(struct device *dev,
+int dev_pm_qos_add_notifier(struct device *dev, int id,
 			    struct notifier_block *notifier);
-int dev_pm_qos_remove_notifier(struct device *dev,
+int dev_pm_qos_remove_notifier(struct device *dev, int id,
 			       struct notifier_block *notifier);
-int dev_pm_qos_add_global_notifier(struct notifier_block *notifier);
-int dev_pm_qos_remove_global_notifier(struct notifier_block *notifier);
+int dev_pm_qos_add_global_notifier(struct notifier_block *notifier, int id);
+int dev_pm_qos_remove_global_notifier(struct notifier_block *notifier, int id);
+int dev_pm_qos_constraints_allocate(struct device *dev);
 void dev_pm_qos_constraints_init(struct device *dev);
 void dev_pm_qos_constraints_destroy(struct device *dev);
 int dev_pm_qos_add_ancestor_request(struct device *dev,
-				    struct dev_pm_qos_request *req, s32 value);
+				    struct dev_pm_qos_request *req,
+				    int id, s32 value);
 #else
 static inline int pm_qos_update_target(struct pm_qos_constraints *c,
 				       struct plist_node *node,
@@ -138,6 +165,8 @@ static inline int pm_qos_add_notifier(int pm_qos_class,
 static inline int pm_qos_remove_notifier(int pm_qos_class,
 					 struct notifier_block *notifier)
 			{ return 0; }
+static inline int pm_qos_register_misc(struct pm_qos_object *qos)
+			{ return 0; }
 static inline int pm_qos_request_active(struct pm_qos_request *req)
 			{ return 0; }
 static inline s32 pm_qos_read_value(struct pm_qos_constraints *c)
@@ -168,6 +197,8 @@ static inline int dev_pm_qos_add_global_notifier(
 static inline int dev_pm_qos_remove_global_notifier(
 					struct notifier_block *notifier)
 			{ return 0; }
+static inline int dev_pm_qos_constraints_allocate(struct device *dev)
+			{ return 0; }
 static inline void dev_pm_qos_constraints_init(struct device *dev)
 {
 	dev->power.power_state = PMSG_ON;
diff --git a/kernel/power/qos.c b/kernel/power/qos.c
index 04b744b..a3524ea 100644
--- a/kernel/power/qos.c
+++ b/kernel/power/qos.c
@@ -50,16 +50,22 @@
  * or pm_qos_object list and pm_qos_objects need to happen with pm_qos_lock
  * held, taken with _irqsave.  One lock to rule them all
  */
-struct pm_qos_object {
-	struct pm_qos_constraints *constraints;
-	struct miscdevice pm_qos_power_miscdev;
-	char *name;
-};
 
 static DEFINE_SPINLOCK(pm_qos_lock);
 
 static struct pm_qos_object null_pm_qos;
 
+static void *pm_qos_global_add(void *);
+static s32 pm_qos_global_read(void *);
+static void pm_qos_global_write(void *, s32);
+static void pm_qos_global_remove(void *);
+
+#define PM_QOS_OBJ_INIT				\
+	.add = pm_qos_global_add,		\
+	.read = pm_qos_global_read,		\
+	.write = pm_qos_global_write,		\
+	.remove = pm_qos_global_remove
+
 static BLOCKING_NOTIFIER_HEAD(cpu_dma_lat_notifier);
 static struct pm_qos_constraints cpu_dma_constraints = {
 	.list = PLIST_HEAD_INIT(cpu_dma_constraints.list),
@@ -71,6 +77,7 @@ static struct pm_qos_constraints cpu_dma_constraints = {
 static struct pm_qos_object cpu_dma_pm_qos = {
 	.constraints = &cpu_dma_constraints,
 	.name = "cpu_dma_latency",
+	PM_QOS_OBJ_INIT,
 };
 
 static BLOCKING_NOTIFIER_HEAD(network_lat_notifier);
@@ -84,6 +91,7 @@ static struct pm_qos_constraints network_lat_constraints = {
 static struct pm_qos_object network_lat_pm_qos = {
 	.constraints = &network_lat_constraints,
 	.name = "network_latency",
+	PM_QOS_OBJ_INIT,
 };
 
 
@@ -98,44 +106,17 @@ static struct pm_qos_constraints network_tput_constraints = {
 static struct pm_qos_object network_throughput_pm_qos = {
 	.constraints = &network_tput_constraints,
 	.name = "network_throughput",
+	PM_QOS_OBJ_INIT,
 };
 
 
-static BLOCKING_NOTIFIER_HEAD(cpu_freq_min_notifier);
-static struct pm_qos_constraints cpu_freq_min_constraints = {
-	.list = PLIST_HEAD_INIT(cpu_freq_min_constraints.list),
-	.target_value = PM_QOS_CPU_FREQ_MIN_DEFAULT_VALUE,
-	.default_value = PM_QOS_CPU_FREQ_MIN_DEFAULT_VALUE,
-	.type = PM_QOS_MAX,
-	.notifiers = &cpu_freq_min_notifier,
-};
-static struct pm_qos_object cpu_freq_min_pm_qos = {
-	.constraints = &cpu_freq_min_constraints,
-	.name = "cpu_freq_min",
-};
-
-
-static BLOCKING_NOTIFIER_HEAD(cpu_freq_max_notifier);
-static struct pm_qos_constraints cpu_freq_max_constraints = {
-	.list = PLIST_HEAD_INIT(cpu_freq_max_constraints.list),
-	.target_value = PM_QOS_CPU_FREQ_MAX_DEFAULT_VALUE,
-	.default_value = PM_QOS_CPU_FREQ_MAX_DEFAULT_VALUE,
-	.type = PM_QOS_MIN,
-	.notifiers = &cpu_freq_max_notifier,
-};
-static struct pm_qos_object cpu_freq_max_pm_qos = {
-	.constraints = &cpu_freq_max_constraints,
-	.name = "cpu_freq_max",
-};
-
-
-static struct pm_qos_object *pm_qos_array[] = {
+#define PM_QOS_MAX_CLASSES (PM_QOS_NUM_CLASSES \
+			    + NR_CPUS * PM_QOS_DEV_NUM_CLASSES)
+static struct pm_qos_object *pm_qos_array[PM_QOS_MAX_CLASSES] = {
 	&null_pm_qos,
 	&cpu_dma_pm_qos,
 	&network_lat_pm_qos,
 	&network_throughput_pm_qos,
-	&cpu_freq_min_pm_qos,
-	&cpu_freq_max_pm_qos,
 };
 
 static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf,
@@ -234,7 +215,7 @@ int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node,
 	if (prev_value != curr_value) {
 		blocking_notifier_call_chain(c->notifiers,
 					     (unsigned long)curr_value,
-					     NULL);
+					     node);
 		return 1;
 	} else {
 		return 0;
@@ -382,22 +363,30 @@ int pm_qos_remove_notifier(int pm_qos_class, struct notifier_block *notifier)
 }
 EXPORT_SYMBOL_GPL(pm_qos_remove_notifier);
 
+static int pm_qos_ifcount = 1;
+
 /* User space interface to PM QoS classes via misc devices */
-static int register_pm_qos_misc(struct pm_qos_object *qos)
+int pm_qos_register_misc(struct pm_qos_object *qos)
 {
 	qos->pm_qos_power_miscdev.minor = MISC_DYNAMIC_MINOR;
 	qos->pm_qos_power_miscdev.name = qos->name;
 	qos->pm_qos_power_miscdev.fops = &pm_qos_power_fops;
-
+	if (pm_qos_array[pm_qos_ifcount] == 0)
+		pm_qos_array[pm_qos_ifcount] = qos;
+	else
+		BUG_ON(pm_qos_array[pm_qos_ifcount] != qos);
+	qos->pm_qos_class = pm_qos_ifcount;
+	++pm_qos_ifcount;
 	return misc_register(&qos->pm_qos_power_miscdev);
 }
+EXPORT_SYMBOL_GPL(pm_qos_register_misc);
 
 static int find_pm_qos_object_by_minor(int minor)
 {
 	int pm_qos_class;
 
 	for (pm_qos_class = 0;
-		pm_qos_class < PM_QOS_NUM_CLASSES; pm_qos_class++) {
+		pm_qos_class < pm_qos_ifcount; pm_qos_class++) {
 		if (minor ==
 			pm_qos_array[pm_qos_class]->pm_qos_power_miscdev.minor)
 			return pm_qos_class;
@@ -411,12 +400,13 @@ static int pm_qos_power_open(struct inode *inode, struct file *filp)
 
 	pm_qos_class = find_pm_qos_object_by_minor(iminor(inode));
 	if (pm_qos_class >= 0) {
-		struct pm_qos_request *req = kzalloc(sizeof(*req), GFP_KERNEL);
-		if (!req)
+		struct pm_qos_object *o = pm_qos_array[pm_qos_class];
+		void *p = o->add(o);
+		if (!p)
 			return -ENOMEM;
 
-		pm_qos_add_request(req, pm_qos_class, PM_QOS_DEFAULT_VALUE);
-		filp->private_data = req;
+		o->req = p;
+		filp->private_data = o;
 
 		return 0;
 	}
@@ -425,12 +415,8 @@ static int pm_qos_power_open(struct inode *inode, struct file *filp)
 
 static int pm_qos_power_release(struct inode *inode, struct file *filp)
 {
-	struct pm_qos_request *req;
-
-	req = filp->private_data;
-	pm_qos_remove_request(req);
-	kfree(req);
-
+	struct pm_qos_object *o = filp->private_data;
+	o->remove(o);
 	return 0;
 }
 
@@ -439,18 +425,8 @@ static ssize_t pm_qos_power_read(struct file *filp, char __user *buf,
 		size_t count, loff_t *f_pos)
 {
 	s32 value;
-	unsigned long flags;
-	struct pm_qos_request *req = filp->private_data;
-
-	if (!req)
-		return -EINVAL;
-	if (!pm_qos_request_active(req))
-		return -EINVAL;
-
-	spin_lock_irqsave(&pm_qos_lock, flags);
-	value = pm_qos_get_value(pm_qos_array[req->pm_qos_class]->constraints);
-	spin_unlock_irqrestore(&pm_qos_lock, flags);
-
+	struct pm_qos_object *o = filp->private_data;
+	value = o->read(o);
 	return simple_read_from_buffer(buf, count, f_pos, &value, sizeof(s32));
 }
 
@@ -458,7 +434,7 @@ static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf,
 		size_t count, loff_t *f_pos)
 {
 	s32 value;
-	struct pm_qos_request *req;
+	struct pm_qos_object *o;
 
 	if (count == sizeof(s32)) {
 		if (copy_from_user(&value, buf, sizeof(s32)))
@@ -489,22 +465,65 @@ static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf,
 		return -EINVAL;
 	}
 
-	req = filp->private_data;
-	pm_qos_update_request(req, value);
-
+	o = filp->private_data;
+	o->write(o, value);
 	return count;
 }
 
 
+static void *pm_qos_global_add(void *p)
+{
+	struct pm_qos_object *o = p;
+	struct pm_qos_request *req = kzalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return 0;
+	pm_qos_add_request(req, o->pm_qos_class, PM_QOS_DEFAULT_VALUE);
+	return req;
+}
+
+static s32 pm_qos_global_read(void *p)
+{
+	struct pm_qos_object *o = p;
+	unsigned long flags;
+	struct pm_qos_request *req = o->req;
+	s32 value;
+
+	if (!req)
+		return -EINVAL;
+	if (!pm_qos_request_active(req))
+		return -EINVAL;
+
+	spin_lock_irqsave(&pm_qos_lock, flags);
+	value = pm_qos_get_value(pm_qos_array[req->pm_qos_class]->constraints);
+	spin_unlock_irqrestore(&pm_qos_lock, flags);
+	return value;
+}
+
+static void pm_qos_global_write(void *p, s32 value)
+{
+	struct pm_qos_object *o = p;
+	struct pm_qos_request *req = o->req;
+	pm_qos_update_request(req, value);
+}
+
+static void pm_qos_global_remove(void *p)
+{
+	struct pm_qos_object *o = p;
+	struct pm_qos_request *req = o->req;
+	pm_qos_remove_request(req);
+	kfree(req);
+	o->req = 0;
+}
+
 static int __init pm_qos_power_init(void)
 {
 	int ret = 0;
 	int i;
 
-	BUILD_BUG_ON(ARRAY_SIZE(pm_qos_array) != PM_QOS_NUM_CLASSES);
+	BUILD_BUG_ON(ARRAY_SIZE(pm_qos_array) < PM_QOS_NUM_CLASSES);
 
 	for (i = 1; i < PM_QOS_NUM_CLASSES; i++) {
-		ret = register_pm_qos_misc(pm_qos_array[i]);
+		ret = pm_qos_register_misc(pm_qos_array[i]);
 		if (ret < 0) {
 			printk(KERN_ERR "pm_qos_param: %s setup failed\n",
 			       pm_qos_array[i]->name);
-- 
1.7.4.1

Re: [linux-pm] [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Rafael J. Wysocki]

On Thursday, January 19, 2012, mark gross wrote:
> On Thu, Jan 19, 2012 at 12:24:26AM +0100, Rafael J. Wysocki wrote:
> > On Wednesday, January 18, 2012, mark gross wrote:
> > > On Mon, Jan 16, 2012 at 10:38:57PM +0100, Rafael J. Wysocki wrote:
> > > > Hi,
> > > > 
> > > > On Monday, January 16, 2012, Antti P Miettinen wrote:
> > > > > [did not reach linux-pm as I sent to wrong address, sorry for
> > > > > duplicates]
> > > > > 
> > > > > The inspiration for this patch series is the N9 CPU frequency boost
> > > > > upon input events:
> > > > > 
> > > > > http://www.spinics.net/lists/cpufreq/msg00667.html
> > > > > 
> > > > > and the related changes in git://codeaurora.org/kernel/msm.git tree.
> > > > > Those patches modify the ondemand cpufreq governor. This patch series
> > > > > adds minimum and maximum CPU frequency as PM QoS parameters and
> > > > > modifies the cpufreq core to enforce the PM QoS limits.
> > > > 
> > > > If that hasn't been clear enough so far, I'm still not convinced that using
> > > > PM QoS for that is a good idea.
> > > > 
> > > > First off, frequency as a unit of throughput is questionable to say the least,
> > > > because it isn't portable from one system to another.  Moreover, even on a
> > > > given system it isn't particularly clear what the exact correspondence
> > > > between frequency and throughput actually is.
> > > 
> > > You are right.  The notion of throughput of a CPU is really hard to
> > > quantify.  Perhaps not using the term "throughput" would help?
> > 
> > Yes, it would.
> > 
> > > The base issue I see, the Intel platform, is needing is that sometimes
> > > we need to block the lowest P-states that the ondemand governor goes for
> > > because those P-states result in media / graphics workloads dropping
> > > frames.  However; GPU intensive workloads do not stress the CPU so the
> > > ondemand governor goes for the low p-state.
> > > 
> > > I could use some way of constraining the PM-throttling of the
> > > cpu-freq that can be hit from kernel or user mode.  So the graphics
> > > driver can dynamically adjust the constraint request on the cpufreq
> > > subsystem.
> > > 
> > > It is problematic that any driver requesting a given frequency request
> > > is not portable across ISA's or even processor families in the same ISA.
> > > But, maybe such a driver should use a module parameter to work around
> > > this lack of portability?
> > 
> > Well, it seems to me that we're trying to add a backdoor to the (apparently
> > inadequate) governors here.  Arguably, the governors should be able to
> > make the right decisions on the basis of the information they receive
> > through their own interfaces.
> 
> the failings of governors to have the information needed is why pm_qos
> was created in the first place.

Well, that's interesting. :-)

> It can be seen as a limitation on the governor from some perspectives.  But,
> I like to think of if as updating existing governors to account for new use
> case requirements as hardware get bigger power management / performance
> dynamic ranges.

The current patchset doesn't seem to update governors, though.

> > > > Second, it's not particularly clear what the meaning of the "min" frequency
> > > > is supposed to be in terms of throughput.
> > > 
> > > It should mean "please cpufreq do not put the cpu into a state where its
> > > clock runs slower than min".  I don't think we should talk about it as
> > > throughput because thats not what the cpufreq controls.
> > 
> > Perhaps we need a new cpufreq governor that would take use PM QoS internally
> > to store requests from different sources, but that would work on a per-CPU
> > basis (not globally) and would provide a new interface for user space?
> > 
> 
> I don' think we need a new cpufreq governor, the parts of this patchset
> that I agree with evolve the governor to account for pm-qos requests
> but, globally for all cpu's.

As I said, it doesn't really evolve governors.  It adds a mechanism for
influencing policy limits in a kind of convoluted fashion.

I mean, there are scaling_min_freq and scaling_max_freq in the per-CPU
cpufreq's sysfs interface that can be used to set min/max policy
limits.  The only problem with those I see, which the current patchset
is kind of trying to address, is that they don't contain information
about who requested those limits.

> Hmm, your right this patch set is global in its request and not
> "per-cpu".  I need to think on that.  Making it per-cpu would likely
> infer we need to make the qos request per cpu as well.  
> 
> Do you think it needs to be per-cpu?  (I'm starting to think "yes" it
> does)
> 
> How do we scale the pm_qos ABI to support per/cpu?  (maybe we don't
> export those types of qos classes to the user mode?)

I think we should focus on iproving the existing cpufreq inteface in the
first place.

Thanks,
Rafael

Re: [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[mark gross]

Would it be possible for you to split this set up where you only have
the cpu_min_freq enabling in pos.c and cpufreq and make the rest of the
set a separate patch set?

As you have it currently the parts I care about are intermixed with
controversial things (max freq and the new cpufreq exports).

Also could you make the entire set git am friendly?  Only the first
patch am's the reset don't.

--mark

On Mon, Jan 16, 2012 at 08:59:53AM +0200, Antti P Miettinen wrote:
> [did not reach linux-pm as I sent to wrong address, sorry for
> duplicates]
> 
> The inspiration for this patch series is the N9 CPU frequency boost
> upon input events:
> 
> http://www.spinics.net/lists/cpufreq/msg00667.html
> 
> and the related changes in git://codeaurora.org/kernel/msm.git tree.
> Those patches modify the ondemand cpufreq governor. This patch series
> adds minimum and maximum CPU frequency as PM QoS parameters and
> modifies the cpufreq core to enforce the PM QoS limits. There is also
> an example module for boosting the frequency upon input events.
> 
> I've been testing these changes against Ubuntu 3.2 kernel on a Dell
> E6420 with the ACPI cpufreq driver. The patches are against
> linux-next/master, compile tested against it.
> 
> V2:
> * split min and max to separate commits
> * handle PM QoS min above max as max
> * handle PM QoS max below min as min
> 
> 	--Antti
> 
> Alex Frid (1):
>   PM QoS: Simplify PM QoS expansion/merge
> 
> Antti P Miettinen (7):
>   PM QoS: Add CPU frequency minimum as PM QoS param
>   cpufreq: Export user_policy min/max
>   cpufreq: Preserve sysfs min/max request
>   cpufreq: Enforce PM QoS minimum limit
>   input: CPU frequency booster
>   PM QoS: Add CPU frequency maximum as PM QoS param
>   cpufreq: Enforce PM QoS maximum frequency
> 
>  drivers/cpufreq/cpufreq.c     |   59 +++++++++++++-
>  drivers/input/Kconfig         |    9 ++
>  drivers/input/Makefile        |    1 +
>  drivers/input/input-cfboost.c |  174 +++++++++++++++++++++++++++++++++++++++++
>  include/linux/pm_qos.h        |   19 ++++-
>  kernel/power/qos.c            |   55 ++++++++++----
>  6 files changed, 295 insertions(+), 22 deletions(-)
>  create mode 100644 drivers/input/input-cfboost.c
> 
> -- 
> 1.7.4.1
> 
> _______________________________________________
> linux-pm mailing list
> linux-pm@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/linux-pm

Re: [PATCH v2 0/8] RFC: CPU frequency min/max as PM QoS params

[Antti P Miettinen]

mark gross <markgross@thegnar.org> writes:
> Would it be possible for you to split this set up where you only have
> the cpu_min_freq enabling in pos.c and cpufreq and make the rest of the
> set a separate patch set?

Would that be patches 1-5 vs the rest?

> As you have it currently the parts I care about are intermixed with
> controversial things (max freq and the new cpufreq exports).

I think the cpufreq changes, patches 3-5, are necessary. Well, patch 3
is not necessary for functionality but would be helpful for
debugging/diagnosis and IMHO makes sense as a companion to patch 4. The
max freq is in patches 7 and 8.

> Also could you make the entire set git am friendly?  Only the first
> patch am's the reset don't.

Could you help me reproduce the problem? For me the mails apply fine.
Also a colleague tested them and encountered no problems. When I know
how to fix the set I'll post a split version.

	--Antti