[ 00/41] 3.2.12-stable review

[ 00/41] 3.2.12-stable review

[Greg KH]

This is the start of the stable review cycle for the 3.2.12 release.
There are 41 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Mar 18 23:00:00 UTC 2012.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.2.12-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
 Documentation/hwmon/w83627ehf                   |    2 +-
 Documentation/hwmon/zl6100                      |   14 ++---
 Makefile                                        |    4 +-
 arch/sparc/Makefile                             |    2 +-
 arch/x86/kernel/cpu/perf_event_intel.c          |   17 +++---
 arch/x86/lib/delay.c                            |    4 +-
 block/genhd.c                                   |   42 ++++++++------
 drivers/block/sx8.c                             |    2 +-
 drivers/hwmon/pmbus/zl6100.c                    |   11 +---
 drivers/hwmon/w83627ehf.c                       |   17 +++---
 drivers/i2c/algos/i2c-algo-bit.c                |    8 ++-
 drivers/media/video/omap3isp/ispccdc.c          |    3 +-
 drivers/net/ethernet/atheros/atl1c/atl1c_main.c |    4 --
 drivers/net/ethernet/packetengines/Kconfig      |    1 +
 drivers/net/ethernet/realtek/r8169.c            |    8 +++
 drivers/net/ethernet/sfc/rx.c                   |    4 +-
 drivers/net/ppp/ppp_generic.c                   |   23 ++++++++
 drivers/net/usb/asix.c                          |    4 ++
 drivers/net/vmxnet3/vmxnet3_drv.c               |    7 +--
 drivers/net/vmxnet3/vmxnet3_int.h               |    4 +-
 drivers/net/wireless/rt2x00/rt2x00dev.c         |    6 +-
 drivers/net/wireless/rt2x00/rt2x00mac.c         |    9 +++
 drivers/net/wireless/rt2x00/rt2x00queue.c       |    3 +
 drivers/pci/pcie/aspm.c                         |    3 +
 drivers/platform/x86/acer-wmi.c                 |   30 +++++++++-
 drivers/rapidio/devices/tsi721.h                |   30 +++++-----
 drivers/regulator/tps6524x-regulator.c          |    2 +-
 drivers/target/iscsi/iscsi_target.c             |    2 +-
 drivers/target/target_core_pr.c                 |   34 +++++++----
 drivers/target/target_core_transport.c          |    1 +
 fs/aio.c                                        |   22 ++++----
 fs/block_dev.c                                  |   16 ++++--
 fs/cifs/file.c                                  |   69 ++++++++++++++++++-----
 fs/namei.c                                      |    4 +-
 fs/partitions/check.c                           |   48 +++++++++++++---
 include/linux/genhd.h                           |    1 +
 include/linux/skbuff.h                          |   10 ++++
 include/linux/workqueue.h                       |    4 ++
 kernel/workqueue.c                              |    7 ++-
 net/bridge/br_multicast.c                       |    7 ++-
 net/core/neighbour.c                            |    2 +
 net/ipv4/tcp_input.c                            |   23 +++++---
 net/ipv4/xfrm4_mode_beet.c                      |    5 +-
 net/ipv4/xfrm4_mode_tunnel.c                    |    6 +-
 net/ipv6/addrconf.c                             |    4 ++
 net/ipv6/xfrm6_mode_beet.c                      |    6 +-
 net/ipv6/xfrm6_mode_tunnel.c                    |    6 +-
 sound/pci/hda/patch_realtek.c                   |    8 +++
 sound/soc/samsung/neo1973_wm8753.c              |    4 +-
 49 files changed, 378 insertions(+), 175 deletions(-)

[ 01/41] ASoC: neo1973: fix neo1973 wm8753 initialization

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>

commit b2ccf065f7b23147ed135a41b01d05a332ca6b7e upstream.

The neo1973 driver had wrong codec name which prevented the "sound card"
from appearing.

Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/samsung/neo1973_wm8753.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/soc/samsung/neo1973_wm8753.c
+++ b/sound/soc/samsung/neo1973_wm8753.c
@@ -421,7 +421,7 @@ static struct snd_soc_dai_link neo1973_d
 	.platform_name = "samsung-audio",
 	.cpu_dai_name = "s3c24xx-iis",
 	.codec_dai_name = "wm8753-hifi",
-	.codec_name = "wm8753-codec.0-001a",
+	.codec_name = "wm8753.0-001a",
 	.init = neo1973_wm8753_init,
 	.ops = &neo1973_hifi_ops,
 },
@@ -430,7 +430,7 @@ static struct snd_soc_dai_link neo1973_d
 	.stream_name = "Voice",
 	.cpu_dai_name = "dfbmcs320-pcm",
 	.codec_dai_name = "wm8753-voice",
-	.codec_name = "wm8753-codec.0-001a",
+	.codec_name = "wm8753.0-001a",
 	.ops = &neo1973_voice_ops,
 },
 };

[ 02/41] ALSA: hda/realtek - Apply the coef-setup only to ALC269VB

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kailang Yang <kailang@realtek.com>

commit 526af6eb4dc71302f59806e2ccac7793963a7fe0 upstream.

The coef setup in alc269_fill_coef() was designed only for ALC269VB
model, and this has some bad effects for other ALC269 variants, such
as turning off the external mic input.  Apply it only to ALC269VB.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2063,12 +2063,16 @@ static int alc_build_controls(struct hda
  */
 
 static void alc_init_special_input_src(struct hda_codec *codec);
+static int alc269_fill_coef(struct hda_codec *codec);
 
 static int alc_init(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
 	unsigned int i;
 
+	if (codec->vendor_id == 0x10ec0269)
+		alc269_fill_coef(codec);
+
 	alc_fix_pll(codec);
 	alc_auto_init_amp(codec, spec->init_amp);
 
@@ -5110,8 +5114,12 @@ static const struct alc_model_fixup alc2
 
 static int alc269_fill_coef(struct hda_codec *codec)
 {
+	struct alc_spec *spec = codec->spec;
 	int val;
 
+	if (spec->codec_variant != ALC269_TYPE_ALC269VB)
+		return 0;
+
 	if ((alc_get_coef0(codec) & 0x00ff) < 0x015) {
 		alc_write_coef_idx(codec, 0xf, 0x960b);
 		alc_write_coef_idx(codec, 0xe, 0x8817);

[ 03/41] aio: fix io_setup/io_destroy race

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@ZenIV.linux.org.uk>

commit 86b62a2cb4fc09037bbce2959d2992962396fd7f upstream.

Have ioctx_alloc() return an extra reference, so that caller would drop it
on success and not bother with re-grabbing it on failure exit.  The current
code is obviously broken - io_destroy() from another thread that managed
to guess the address io_setup() would've returned would free ioctx right
under us; gets especially interesting if aio_context_t * we pass to
io_setup() points to PROT_READ mapping, so put_user() fails and we end
up doing io_destroy() on kioctx another thread has just got freed...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/aio.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/fs/aio.c
+++ b/fs/aio.c
@@ -273,7 +273,7 @@ static struct kioctx *ioctx_alloc(unsign
 	mm = ctx->mm = current->mm;
 	atomic_inc(&mm->mm_count);
 
-	atomic_set(&ctx->users, 1);
+	atomic_set(&ctx->users, 2);
 	spin_lock_init(&ctx->ctx_lock);
 	spin_lock_init(&ctx->ring_info.ring_lock);
 	init_waitqueue_head(&ctx->wait);
@@ -1338,10 +1338,10 @@ SYSCALL_DEFINE2(io_setup, unsigned, nr_e
 	ret = PTR_ERR(ioctx);
 	if (!IS_ERR(ioctx)) {
 		ret = put_user(ioctx->user_id, ctxp);
-		if (!ret)
+		if (!ret) {
+			put_ioctx(ioctx);
 			return 0;
-
-		get_ioctx(ioctx); /* io_destroy() expects us to hold a ref */
+		}
 		io_destroy(ioctx);
 	}
 

[ 04/41] aio: fix the "too late munmap()" race

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@ZenIV.linux.org.uk>

commit c7b285550544c22bc005ec20978472c9ac7138c6 upstream.

Current code has put_ioctx() called asynchronously from aio_fput_routine();
that's done *after* we have killed the request that used to pin ioctx,
so there's nothing to stop io_destroy() waiting in wait_for_all_aios()
from progressing.  As the result, we can end up with async call of
put_ioctx() being the last one and possibly happening during exit_mmap()
or elf_core_dump(), neither of which expects stray munmap() being done
to them...

We do need to prevent _freeing_ ioctx until aio_fput_routine() is done
with that, but that's all we care about - neither io_destroy() nor
exit_aio() will progress past wait_for_all_aios() until aio_fput_routine()
does really_put_req(), so the ioctx teardown won't be done until then
and we don't care about the contents of ioctx past that point.

Since actual freeing of these suckers is RCU-delayed, we don't need to
bump ioctx refcount when request goes into list for async removal.
All we need is rcu_read_lock held just over the ->ctx_lock-protected
area in aio_fput_routine().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/aio.c |   14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

--- a/fs/aio.c
+++ b/fs/aio.c
@@ -228,12 +228,6 @@ static void __put_ioctx(struct kioctx *c
 	call_rcu(&ctx->rcu_head, ctx_rcu_free);
 }
 
-static inline void get_ioctx(struct kioctx *kioctx)
-{
-	BUG_ON(atomic_read(&kioctx->users) <= 0);
-	atomic_inc(&kioctx->users);
-}
-
 static inline int try_get_ioctx(struct kioctx *kioctx)
 {
 	return atomic_inc_not_zero(&kioctx->users);
@@ -609,11 +603,16 @@ static void aio_fput_routine(struct work
 			fput(req->ki_filp);
 
 		/* Link the iocb into the context's free list */
+		rcu_read_lock();
 		spin_lock_irq(&ctx->ctx_lock);
 		really_put_req(ctx, req);
+		/*
+		 * at that point ctx might've been killed, but actual
+		 * freeing is RCU'd
+		 */
 		spin_unlock_irq(&ctx->ctx_lock);
+		rcu_read_unlock();
 
-		put_ioctx(ctx);
 		spin_lock_irq(&fput_lock);
 	}
 	spin_unlock_irq(&fput_lock);
@@ -644,7 +643,6 @@ static int __aio_put_req(struct kioctx *
 	 * this function will be executed w/out any aio kthread wakeup.
 	 */
 	if (unlikely(!fput_atomic(req->ki_filp))) {
-		get_ioctx(ctx);
 		spin_lock(&fput_lock);
 		list_add(&req->ki_list, &fput_head);
 		spin_unlock(&fput_lock);

[ 05/41] x86: Derandom delay_tsc for 64 bit

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit a7f4255f906f60f72e00aad2fb000939449ff32e upstream.

Commit f0fbf0abc093 ("x86: integrate delay functions") converted
delay_tsc() into a random delay generator for 64 bit.  The reason is
that it merged the mostly identical versions of delay_32.c and
delay_64.c.  Though the subtle difference of the result was:

 static void delay_tsc(unsigned long loops)
 {
-	unsigned bclock, now;
+	unsigned long bclock, now;

Now the function uses rdtscl() which returns the lower 32bit of the
TSC. On 32bit that's not problematic as unsigned long is 32bit. On 64
bit this fails when the lower 32bit are close to wrap around when
bclock is read, because the following check

       if ((now - bclock) >= loops)
       	  	break;

evaluated to true on 64bit for e.g. bclock = 0xffffffff and now = 0
because the unsigned long (now - bclock) of these values results in
0xffffffff00000001 which is definitely larger than the loops
value. That explains Tvortkos observation:

"Because I am seeing udelay(500) (_occasionally_) being short, and
 that by delaying for some duration between 0us (yep) and 491us."

Make those variables explicitely u32 again, so this works for both 32
and 64 bit.

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/lib/delay.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/lib/delay.c
+++ b/arch/x86/lib/delay.c
@@ -48,9 +48,9 @@ static void delay_loop(unsigned long loo
 }
 
 /* TSC based delay: */
-static void delay_tsc(unsigned long loops)
+static void delay_tsc(unsigned long __loops)
 {
-	unsigned long bclock, now;
+	u32 bclock, now, loops = __loops;
 	int cpu;
 
 	preempt_disable();

[ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthew Garrett <mjg@redhat.com>

commit 4949be16822e92a18ea0cc1616319926628092ee upstream.

Right now we won't touch ASPM state if ASPM is disabled, except in the case
where we find a device that appears to be too old to reliably support ASPM.
Right now we'll clear it in that case, which is almost certainly the wrong
thing to do. The easiest way around this is just to disable the blacklisting
when ASPM is disabled.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/pcie/aspm.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -500,6 +500,9 @@ static int pcie_aspm_sanity_check(struct
 	int pos;
 	u32 reg32;
 
+	if (aspm_disabled)
+		return 0;
+
 	/*
 	 * Some functions in a slot might not all be PCIe functions,
 	 * very strange. Disable ASPM for the whole slot

Re: [ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

[Ken Moffat]

[-- Attachment #1: Type: text/plain, Size: 1977 bytes --]

On Fri, Mar 16, 2012 at 04:38:16PM -0700, Greg KH wrote:
> 3.2-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Matthew Garrett <mjg@redhat.com>
> 
> commit 4949be16822e92a18ea0cc1616319926628092ee upstream.
> 
> Right now we won't touch ASPM state if ASPM is disabled, except in the case
> where we find a device that appears to be too old to reliably support ASPM.
> Right now we'll clear it in that case, which is almost certainly the wrong
> thing to do. The easiest way around this is just to disable the blacklisting
> when ASPM is disabled.
> 
> Signed-off-by: Matthew Garrett <mjg@redhat.com>
> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 

 Sorry for the late response, but I bought a new machine this week
(low-end i3) and this has bitten me.  I prepared a "generic" x86_64
kernel using 3.2.9, which I hoped would be good enough to get me
started, and later prepared another using 3.3.0.  Long story short -
3.2.9 was adequate, 3.3.0 crashes early in boot (before switching
from the 80x25 console to kms).  All the interesting part has
scrolled off the screen, and it's too early to get logged.

 By a process of elimination, I found that all the stable kernels
after 3.2.11 crash.  Looking at the changes there, a few seemed
possible candidates.  With those all added to 3.2.8, that too crashed
(I had other things that needed tweaking in the config, indeed I
still do, and wanted to try to fix some of them which is why I went
back to an older kernel, trying not to set EXTRAVERSION
unnecessarily).  I then took that amended config to use for newer
kernels.  Trial and error showed this commit seemed to be the
problem.

 I then reverted this commit from 3.3.0, and took my amended .config
which works adequately in vanilla 3.2.8.  I'm now running that.

 The .config is attached.  Can I provide any other information ?

ken
-- 

[-- Attachment #2: config-3.3.0-revert1 --]
[-- Type: text/plain, Size: 66054 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.3.0-rev1 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=1
CONFIG_RCU_BOOST_DELAY=500
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=4
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y
CONFIG_HAVE_BPF_JIT=y
# CONFIG_BPF_JIT is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
# CONFIG_DMA_SHARED_BUFFER is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
CONFIG_MII=y
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=m
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_BNX2X=m
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBEVF=m
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_ZNET is not set
CONFIG_IP1000=m
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKGE_GENESIS is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8851_MLL=m
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_FEALNX=m
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
CONFIG_PCH_GBE=m
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_ATP=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
CONFIG_SFC=m
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
CONFIG_SMSC9420=m
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_VELOCITY=m
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=m
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_TR is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIA=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_INTEL_MID=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=m
CONFIG_I2C_EG20T=m

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_APPLESMC is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_S5M_CORE is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not set
CONFIG_LPC_SCH=m
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
CONFIG_DRM_RADEON_KMS=y
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
# CONFIG_FONT_8x16 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
CONFIG_FONT_SUN12x22=y
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=y
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=y
# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_MV is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_SUPPORT=y
# CONFIG_AMD_IOMMU is not set
# CONFIG_INTEL_IOMMU is not set
# CONFIG_IRQ_REMAP is not set
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_EXT4_DEBUG=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENT=y
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=m

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_HASH2=m
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=m
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set

Re: [ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

[Jonathan Nieder]

Hi Ken,

Ken Moffat wrote:

>                                                   Long story short -
> 3.2.9 was adequate, 3.3.0 crashes early in boot (before switching
> from the 80x25 console to kms).
[...]
>  I then reverted this commit from 3.3.0

You might enjoy the following patch:

 http://thread.gmane.org/gmane.linux.kernel.pci/14503

Hope that helps,
Jonathan

Re: [ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

[Linus Torvalds]

On Fri, Mar 30, 2012 at 8:33 PM, Jonathan Nieder <jrnieder@gmail.com> wrote:
>
> You might enjoy the following patch:
>
>  http://thread.gmane.org/gmane.linux.kernel.pci/14503

Yes, good. I guess I should just take it and not wait for Bjorn, since
we really need this for stable too. Matthew?

                Linus

Re: [ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

[Linus Torvalds]

On Fri, Mar 30, 2012 at 8:33 PM, Jonathan Nieder <jrnieder@gmail.com> wrote:
>
> You might enjoy the following patch:
>
> �http://thread.gmane.org/gmane.linux.kernel.pci/14503

Yes, good. I guess I should just take it and not wait for Bjorn, since
we really need this for stable too. Matthew?

                Linus

Re: [ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

[Matthew Garrett]

On Sat, Mar 31, 2012 at 11:20:41AM -0700, Linus Torvalds wrote:
> On Fri, Mar 30, 2012 at 8:33 PM, Jonathan Nieder <jrnieder@gmail.com> wrote:
> >
> > You might enjoy the following patch:
> >
> >  http://thread.gmane.org/gmane.linux.kernel.pci/14503
> 
> Yes, good. I guess I should just take it and not wait for Bjorn, since
> we really need this for stable too. Matthew?

Works for me.

-- 
Matthew Garrett | mjg59@srcf.ucam.org

Re: [ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

[Matthew Garrett]

On Sat, Mar 31, 2012 at 11:20:41AM -0700, Linus Torvalds wrote:
> On Fri, Mar 30, 2012 at 8:33 PM, Jonathan Nieder <jrnieder@gmail.com> wrote:
> >
> > You might enjoy the following patch:
> >
> > �http://thread.gmane.org/gmane.linux.kernel.pci/14503
> 
> Yes, good. I guess I should just take it and not wait for Bjorn, since
> we really need this for stable too. Matthew?

Works for me.

-- 
Matthew Garrett | mjg59@srcf.ucam.org

Re: [ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

[Ken Moffat]

On Sat, Mar 31, 2012 at 07:32:46PM +0100, Matthew Garrett wrote:
> On Sat, Mar 31, 2012 at 11:20:41AM -0700, Linus Torvalds wrote:
> > On Fri, Mar 30, 2012 at 8:33 PM, Jonathan Nieder <jrnieder@gmail.com> wrote:
> > >
> > > You might enjoy the following patch:
> > >
> > >  http://thread.gmane.org/gmane.linux.kernel.pci/14503
> > 
> > Yes, good. I guess I should just take it and not wait for Bjorn, since
> > we really need this for stable too. Matthew?
> 
> Works for me.
> 
> -- 
> Matthew Garrett | mjg59@srcf.ucam.org

 Belatedly doing a reply to all - just found this thread in
/var/mail after my mbox overflowed.  Anyway, thanks.

ĸen
-- 
das eine Mal als Tragödie, das andere Mal als Farce

Re: [ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

[Ken Moffat]

On Sat, Mar 31, 2012 at 04:23:56AM +0100, Ken Moffat wrote:

[ update : 3.4.0-rc1 boots without reverting this ]
> On Fri, Mar 16, 2012 at 04:38:16PM -0700, Greg KH wrote:
> > 3.2-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Matthew Garrett <mjg@redhat.com>
> > 
> > commit 4949be16822e92a18ea0cc1616319926628092ee upstream.
> > 
> > Right now we won't touch ASPM state if ASPM is disabled, except in the case
> > where we find a device that appears to be too old to reliably support ASPM.
> > Right now we'll clear it in that case, which is almost certainly the wrong
> > thing to do. The easiest way around this is just to disable the blacklisting
> > when ASPM is disabled.
> > 
> > Signed-off-by: Matthew Garrett <mjg@redhat.com>
> > Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > 
> 
>  Sorry for the late response, but I bought a new machine this week
> (low-end i3) and this has bitten me.  I prepared a "generic" x86_64
> kernel using 3.2.9, which I hoped would be good enough to get me
> started, and later prepared another using 3.3.0.  Long story short -
> 3.2.9 was adequate, 3.3.0 crashes early in boot (before switching
> from the 80x25 console to kms).  All the interesting part has
> scrolled off the screen, and it's too early to get logged.
> 
[...]
>   Trial and error showed this commit seemed to be the
> problem.
> 
>  I then reverted this commit from 3.3.0, and took my amended .config
> which works adequately in vanilla 3.2.8.  I'm now running that.
> 
 BUT, for 3.4.0-rc1 I don't need to revert it - just went with the
defaults for additions in menuconfig, and it boots fine.  Maybe
something else needs to be backported ?

ken
-- 
das eine Mal als Tragödie, das andere Mal als Farce

Re: [ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

[Ken Moffat]

On Sat, Mar 31, 2012 at 04:23:56AM +0100, Ken Moffat wrote:

[ update : 3.4.0-rc1 boots without reverting this ]
> On Fri, Mar 16, 2012 at 04:38:16PM -0700, Greg KH wrote:
> > 3.2-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Matthew Garrett <mjg@redhat.com>
> > 
> > commit 4949be16822e92a18ea0cc1616319926628092ee upstream.
> > 
> > Right now we won't touch ASPM state if ASPM is disabled, except in the case
> > where we find a device that appears to be too old to reliably support ASPM.
> > Right now we'll clear it in that case, which is almost certainly the wrong
> > thing to do. The easiest way around this is just to disable the blacklisting
> > when ASPM is disabled.
> > 
> > Signed-off-by: Matthew Garrett <mjg@redhat.com>
> > Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > 
> 
>  Sorry for the late response, but I bought a new machine this week
> (low-end i3) and this has bitten me.  I prepared a "generic" x86_64
> kernel using 3.2.9, which I hoped would be good enough to get me
> started, and later prepared another using 3.3.0.  Long story short -
> 3.2.9 was adequate, 3.3.0 crashes early in boot (before switching
> from the 80x25 console to kms).  All the interesting part has
> scrolled off the screen, and it's too early to get logged.
> 
[...]
>   Trial and error showed this commit seemed to be the
> problem.
> 
>  I then reverted this commit from 3.3.0, and took my amended .config
> which works adequately in vanilla 3.2.8.  I'm now running that.
> 
 BUT, for 3.4.0-rc1 I don't need to revert it - just went with the
defaults for additions in menuconfig, and it boots fine.  Maybe
something else needs to be backported ?

ken
-- 
das eine Mal als Trag�die, das andere Mal als Farce

Re: [ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

[Linus Torvalds]

On Sun, Apr 1, 2012 at 9:11 AM, Ken Moffat <zarniwhoop@ntlworld.com> wrote:
>
>  BUT, for 3.4.0-rc1 I don't need to revert it - just went with the
> defaults for additions in menuconfig, and it boots fine.  Maybe
> something else needs to be backported ?

It was fixed by commit c9651e70ad0a ("ASPM: Fix pcie devices with
non-pcie children") which is marked for stable but just hasn't made it
quite yet.

                   Linus

Re: [ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

[Linus Torvalds]

On Sun, Apr 1, 2012 at 9:11 AM, Ken Moffat <zarniwhoop@ntlworld.com> wrote:
>
> �BUT, for 3.4.0-rc1 I don't need to revert it - just went with the
> defaults for additions in menuconfig, and it boots fine. �Maybe
> something else needs to be backported ?

It was fixed by commit c9651e70ad0a ("ASPM: Fix pcie devices with
non-pcie children") which is marked for stable but just hasn't made it
quite yet.

                   Linus

Re: [ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

[Greg KH]

On Sun, Apr 01, 2012 at 09:59:12AM -0700, Linus Torvalds wrote:
> On Sun, Apr 1, 2012 at 9:11 AM, Ken Moffat <zarniwhoop@ntlworld.com> wrote:
> >
> >  BUT, for 3.4.0-rc1 I don't need to revert it - just went with the
> > defaults for additions in menuconfig, and it boots fine.  Maybe
> > something else needs to be backported ?
> 
> It was fixed by commit c9651e70ad0a ("ASPM: Fix pcie devices with
> non-pcie children") which is marked for stable but just hasn't made it
> quite yet.

I've added it now, it will show up in the next round of stable kernels.

greg k-h

Re: [ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

[Greg KH]

On Sun, Apr 01, 2012 at 09:59:12AM -0700, Linus Torvalds wrote:
> On Sun, Apr 1, 2012 at 9:11 AM, Ken Moffat <zarniwhoop@ntlworld.com> wrote:
> >
> > �BUT, for 3.4.0-rc1 I don't need to revert it - just went with the
> > defaults for additions in menuconfig, and it boots fine. �Maybe
> > something else needs to be backported ?
> 
> It was fixed by commit c9651e70ad0a ("ASPM: Fix pcie devices with
> non-pcie children") which is marked for stable but just hasn't made it
> quite yet.

I've added it now, it will show up in the next round of stable kernels.

greg k-h

Re: [ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

[Ken Moffat]

On Sun, Apr 01, 2012 at 05:11:08PM +0100, Ken Moffat wrote:
> On Sat, Mar 31, 2012 at 04:23:56AM +0100, Ken Moffat wrote:
> 
> [ update : 3.4.0-rc1 boots without reverting this ]

 Both 3.3.1 and 3.2.14 boot.  Thanks to whoever fixed this!

ken
-- 
das eine Mal als Tragödie, das andere Mal als Farce

Re: [ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

[Ken Moffat]

On Sun, Apr 01, 2012 at 05:11:08PM +0100, Ken Moffat wrote:
> On Sat, Mar 31, 2012 at 04:23:56AM +0100, Ken Moffat wrote:
> 
> [ update : 3.4.0-rc1 boots without reverting this ]

 Both 3.3.1 and 3.2.14 boot.  Thanks to whoever fixed this!

ken
-- 
das eine Mal als Trag�die, das andere Mal als Farce

[ 07/41] [media] omap3isp: ccdc: Fix crash in HS/VS interrupt handler

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

commit bd0f2e6da7ea9e225cb2dbd3229e25584b0e9538 upstream.

The HS/VS interrupt handler needs to access the pipeline object. It
erronously tries to get it from the CCDC output video node, which isn't
necessarily included in the pipeline. This leads to a NULL pointer
dereference.

Fix the bug by getting the pipeline object from the CCDC subdev entity.

Reported-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/video/omap3isp/ispccdc.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/media/video/omap3isp/ispccdc.c
+++ b/drivers/media/video/omap3isp/ispccdc.c
@@ -1406,8 +1406,7 @@ static int __ccdc_handle_stopping(struct
 
 static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc)
 {
-	struct isp_pipeline *pipe =
-		to_isp_pipeline(&ccdc->video_out.video.entity);
+	struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
 	struct video_device *vdev = ccdc->subdev.devnode;
 	struct v4l2_event event;
 

[ 08/41] rt2x00: fix random stalls

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislaw Gruszka <sgruszka@redhat.com>

commit 3780d038fdf4b5ef26ead10b0604ab1f46dd9510 upstream.

Is possible that we stop queue and then do not wake up it again,
especially when packets are transmitted fast. That can be easily
reproduced with modified tx queue entry_num to some small value e.g. 16.

If mac80211 already hold local->queue_stop_reason_lock, then we can wait
on that lock in both rt2x00queue_pause_queue() and
rt2x00queue_unpause_queue(). After drooping ->queue_stop_reason_lock
is possible that __ieee80211_wake_queue() will be performed before
__ieee80211_stop_queue(), hence we stop queue and newer wake up it
again.

Another race condition is possible when between rt2x00queue_threshold()
check and rt2x00queue_pause_queue() we will process all pending tx
buffers on different cpu. This might happen if for example interrupt
will be triggered on cpu performing rt2x00mac_tx().

To prevent race conditions serialize pause/unpause by queue->tx_lock.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/rt2x00/rt2x00dev.c   |    6 +++++-
 drivers/net/wireless/rt2x00/rt2x00mac.c   |    9 +++++++++
 drivers/net/wireless/rt2x00/rt2x00queue.c |    3 +++
 3 files changed, 17 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -426,10 +426,14 @@ void rt2x00lib_txdone(struct queue_entry
 	/*
 	 * If the data queue was below the threshold before the txdone
 	 * handler we must make sure the packet queue in the mac80211 stack
-	 * is reenabled when the txdone handler has finished.
+	 * is reenabled when the txdone handler has finished. This has to be
+	 * serialized with rt2x00mac_tx(), otherwise we can wake up queue
+	 * before it was stopped.
 	 */
+	spin_lock_bh(&entry->queue->tx_lock);
 	if (!rt2x00queue_threshold(entry->queue))
 		rt2x00queue_unpause_queue(entry->queue);
+	spin_unlock_bh(&entry->queue->tx_lock);
 }
 EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
 
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -152,13 +152,22 @@ void rt2x00mac_tx(struct ieee80211_hw *h
 	if (unlikely(rt2x00queue_write_tx_frame(queue, skb, false)))
 		goto exit_fail;
 
+	/*
+	 * Pausing queue has to be serialized with rt2x00lib_txdone(). Note
+	 * we should not use spin_lock_bh variant as bottom halve was already
+	 * disabled before ieee80211_xmit() call.
+	 */
+	spin_lock(&queue->tx_lock);
 	if (rt2x00queue_threshold(queue))
 		rt2x00queue_pause_queue(queue);
+	spin_unlock(&queue->tx_lock);
 
 	return;
 
  exit_fail:
+	spin_lock(&queue->tx_lock);
 	rt2x00queue_pause_queue(queue);
+	spin_unlock(&queue->tx_lock);
  exit_free_skb:
 	dev_kfree_skb_any(skb);
 }
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -619,6 +619,9 @@ int rt2x00queue_write_tx_frame(struct da
 	else if (test_bit(REQUIRE_DMA, &queue->rt2x00dev->cap_flags))
 		rt2x00queue_align_frame(skb);
 
+	/*
+	 * That function must be called with bh disabled.
+	 */
 	spin_lock(&queue->tx_lock);
 
 	if (unlikely(rt2x00queue_full(queue))) {

[ 09/41] perf/x86: Fix local vs remote memory events for NHM/WSM

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <a.p.zijlstra@chello.nl>

commit 87e24f4b67e68d9fd8df16e0bf9c66d1ad2a2533 upstream.

Verified using the below proglet.. before:

[root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 0
remote write

 Performance counter stats for './numa 0':

         2,101,554 node-stores
         2,096,931 node-store-misses

       5.021546079 seconds time elapsed

[root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 1
local write

 Performance counter stats for './numa 1':

           501,137 node-stores
               199 node-store-misses

       5.124451068 seconds time elapsed

After:

[root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 0
remote write

 Performance counter stats for './numa 0':

         2,107,516 node-stores
         2,097,187 node-store-misses

       5.012755149 seconds time elapsed

[root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 1
local write

 Performance counter stats for './numa 1':

         2,063,355 node-stores
               165 node-store-misses

       5.082091494 seconds time elapsed

#define _GNU_SOURCE

#include <sched.h>
#include <stdio.h>
#include <errno.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <dirent.h>
#include <signal.h>
#include <unistd.h>
#include <numaif.h>
#include <stdlib.h>

#define SIZE (32*1024*1024)

volatile int done;

void sig_done(int sig)
{
	done = 1;
}

int main(int argc, char **argv)
{
	cpu_set_t *mask, *mask2;
	size_t size;
	int i, err, t;
	int nrcpus = 1024;
	char *mem;
	unsigned long nodemask = 0x01; /* node 0 */
	DIR *node;
	struct dirent *de;
	int read = 0;
	int local = 0;

	if (argc < 2) {
		printf("usage: %s [0-3]\n", argv[0]);
		printf("  bit0 - local/remote\n");
		printf("  bit1 - read/write\n");
		exit(0);
	}

	switch (atoi(argv[1])) {
	case 0:
		printf("remote write\n");
		break;
	case 1:
		printf("local write\n");
		local = 1;
		break;
	case 2:
		printf("remote read\n");
		read = 1;
		break;
	case 3:
		printf("local read\n");
		local = 1;
		read = 1;
		break;
	}

	mask = CPU_ALLOC(nrcpus);
	size = CPU_ALLOC_SIZE(nrcpus);
	CPU_ZERO_S(size, mask);

	node = opendir("/sys/devices/system/node/node0/");
	if (!node)
		perror("opendir");
	while ((de = readdir(node))) {
		int cpu;

		if (sscanf(de->d_name, "cpu%d", &cpu) == 1)
			CPU_SET_S(cpu, size, mask);
	}
	closedir(node);

	mask2 = CPU_ALLOC(nrcpus);
	CPU_ZERO_S(size, mask2);
	for (i = 0; i < size; i++)
		CPU_SET_S(i, size, mask2);
	CPU_XOR_S(size, mask2, mask2, mask); // invert

	if (!local)
		mask = mask2;

	err = sched_setaffinity(0, size, mask);
	if (err)
		perror("sched_setaffinity");

	mem = mmap(0, SIZE, PROT_READ|PROT_WRITE,
			MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
	err = mbind(mem, SIZE, MPOL_BIND, &nodemask, 8*sizeof(nodemask), MPOL_MF_MOVE);
	if (err)
		perror("mbind");

	signal(SIGALRM, sig_done);
	alarm(5);

	if (!read) {
		while (!done) {
			for (i = 0; i < SIZE; i++)
				mem[i] = 0x01;
		}
	} else {
		while (!done) {
			for (i = 0; i < SIZE; i++)
				t += *(volatile char *)(mem + i);
		}
	}

	return 0;
}

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tq73sxus35xmqpojf7ootxgs@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/perf_event_intel.c |   17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -389,14 +389,15 @@ static __initconst const u64 westmere_hw
 #define NHM_LOCAL_DRAM		(1 << 14)
 #define NHM_NON_DRAM		(1 << 15)
 
-#define NHM_ALL_DRAM		(NHM_REMOTE_DRAM|NHM_LOCAL_DRAM)
+#define NHM_LOCAL		(NHM_LOCAL_DRAM|NHM_REMOTE_CACHE_FWD)
+#define NHM_REMOTE		(NHM_REMOTE_DRAM)
 
 #define NHM_DMND_READ		(NHM_DMND_DATA_RD)
 #define NHM_DMND_WRITE		(NHM_DMND_RFO|NHM_DMND_WB)
 #define NHM_DMND_PREFETCH	(NHM_PF_DATA_RD|NHM_PF_DATA_RFO)
 
 #define NHM_L3_HIT	(NHM_UNCORE_HIT|NHM_OTHER_CORE_HIT_SNP|NHM_OTHER_CORE_HITM)
-#define NHM_L3_MISS	(NHM_NON_DRAM|NHM_ALL_DRAM|NHM_REMOTE_CACHE_FWD)
+#define NHM_L3_MISS	(NHM_NON_DRAM|NHM_LOCAL_DRAM|NHM_REMOTE_DRAM|NHM_REMOTE_CACHE_FWD)
 #define NHM_L3_ACCESS	(NHM_L3_HIT|NHM_L3_MISS)
 
 static __initconst const u64 nehalem_hw_cache_extra_regs
@@ -420,16 +421,16 @@ static __initconst const u64 nehalem_hw_
  },
  [ C(NODE) ] = {
 	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = NHM_DMND_READ|NHM_ALL_DRAM,
-		[ C(RESULT_MISS)   ] = NHM_DMND_READ|NHM_REMOTE_DRAM,
+		[ C(RESULT_ACCESS) ] = NHM_DMND_READ|NHM_LOCAL|NHM_REMOTE,
+		[ C(RESULT_MISS)   ] = NHM_DMND_READ|NHM_REMOTE,
 	},
 	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = NHM_DMND_WRITE|NHM_ALL_DRAM,
-		[ C(RESULT_MISS)   ] = NHM_DMND_WRITE|NHM_REMOTE_DRAM,
+		[ C(RESULT_ACCESS) ] = NHM_DMND_WRITE|NHM_LOCAL|NHM_REMOTE,
+		[ C(RESULT_MISS)   ] = NHM_DMND_WRITE|NHM_REMOTE,
 	},
 	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = NHM_DMND_PREFETCH|NHM_ALL_DRAM,
-		[ C(RESULT_MISS)   ] = NHM_DMND_PREFETCH|NHM_REMOTE_DRAM,
+		[ C(RESULT_ACCESS) ] = NHM_DMND_PREFETCH|NHM_LOCAL|NHM_REMOTE,
+		[ C(RESULT_MISS)   ] = NHM_DMND_PREFETCH|NHM_REMOTE,
 	},
  },
 };

[ 10/41] CIFS: Do not kmalloc under the flocks spinlock

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Shilovsky <piastry@etersoft.ru>

commit d5751469f210d2149cc2159ffff66cbeef6da3f2 upstream.

Reorganize the code to make the memory already allocated before
spinlock'ed loop.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/file.c |   69 ++++++++++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 56 insertions(+), 13 deletions(-)

--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -920,16 +920,26 @@ cifs_push_mandatory_locks(struct cifsFil
 	for (lockp = &inode->i_flock; *lockp != NULL; \
 	     lockp = &(*lockp)->fl_next)
 
+struct lock_to_push {
+	struct list_head llist;
+	__u64 offset;
+	__u64 length;
+	__u32 pid;
+	__u16 netfid;
+	__u8 type;
+};
+
 static int
 cifs_push_posix_locks(struct cifsFileInfo *cfile)
 {
 	struct cifsInodeInfo *cinode = CIFS_I(cfile->dentry->d_inode);
 	struct cifs_tcon *tcon = tlink_tcon(cfile->tlink);
 	struct file_lock *flock, **before;
-	struct cifsLockInfo *lck, *tmp;
+	unsigned int count = 0, i = 0;
 	int rc = 0, xid, type;
+	struct list_head locks_to_send, *el;
+	struct lock_to_push *lck, *tmp;
 	__u64 length;
-	struct list_head locks_to_send;
 
 	xid = GetXid();
 
@@ -940,29 +950,55 @@ cifs_push_posix_locks(struct cifsFileInf
 		return rc;
 	}
 
+	lock_flocks();
+	cifs_for_each_lock(cfile->dentry->d_inode, before) {
+		if ((*before)->fl_flags & FL_POSIX)
+			count++;
+	}
+	unlock_flocks();
+
 	INIT_LIST_HEAD(&locks_to_send);
 
+	/*
+	 * Allocating count locks is enough because no locks can be added to
+	 * the list while we are holding cinode->lock_mutex that protects
+	 * locking operations of this inode.
+	 */
+	for (; i < count; i++) {
+		lck = kmalloc(sizeof(struct lock_to_push), GFP_KERNEL);
+		if (!lck) {
+			rc = -ENOMEM;
+			goto err_out;
+		}
+		list_add_tail(&lck->llist, &locks_to_send);
+	}
+
+	i = 0;
+	el = locks_to_send.next;
 	lock_flocks();
 	cifs_for_each_lock(cfile->dentry->d_inode, before) {
+		if (el == &locks_to_send) {
+			/* something is really wrong */
+			cERROR(1, "Can't push all brlocks!");
+			break;
+		}
 		flock = *before;
+		if ((flock->fl_flags & FL_POSIX) == 0)
+			continue;
 		length = 1 + flock->fl_end - flock->fl_start;
 		if (flock->fl_type == F_RDLCK || flock->fl_type == F_SHLCK)
 			type = CIFS_RDLCK;
 		else
 			type = CIFS_WRLCK;
-
-		lck = cifs_lock_init(flock->fl_start, length, type,
-				     cfile->netfid);
-		if (!lck) {
-			rc = -ENOMEM;
-			goto send_locks;
-		}
+		lck = list_entry(el, struct lock_to_push, llist);
 		lck->pid = flock->fl_pid;
-
-		list_add_tail(&lck->llist, &locks_to_send);
+		lck->netfid = cfile->netfid;
+		lck->length = length;
+		lck->type = type;
+		lck->offset = flock->fl_start;
+		i++;
+		el = el->next;
 	}
-
-send_locks:
 	unlock_flocks();
 
 	list_for_each_entry_safe(lck, tmp, &locks_to_send, llist) {
@@ -979,11 +1015,18 @@ send_locks:
 		kfree(lck);
 	}
 
+out:
 	cinode->can_cache_brlcks = false;
 	mutex_unlock(&cinode->lock_mutex);
 
 	FreeXid(xid);
 	return rc;
+err_out:
+	list_for_each_entry_safe(lck, tmp, &locks_to_send, llist) {
+		list_del(&lck->llist);
+		kfree(lck);
+	}
+	goto out;
 }
 
 static int

Re: [ 10/41] CIFS: Do not kmalloc under the flocks spinlock

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 2624 bytes --]

On Fri, Mar 16, 2012 at 04:38:20PM -0700, Greg KH wrote:
> 3.2-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Pavel Shilovsky <piastry@etersoft.ru>
> 
> commit d5751469f210d2149cc2159ffff66cbeef6da3f2 upstream.
> 
> Reorganize the code to make the memory already allocated before
> spinlock'ed loop.
> 
> Reviewed-by: Jeff Layton <jlayton@redhat.com>
> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
> Signed-off-by: Steve French <sfrench@us.ibm.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> ---
>  fs/cifs/file.c |   69 ++++++++++++++++++++++++++++++++++++++++++++++-----------
>  1 file changed, 56 insertions(+), 13 deletions(-)
> 
> --- a/fs/cifs/file.c
> +++ b/fs/cifs/file.c
[....]
> @@ -940,29 +950,55 @@ cifs_push_posix_locks(struct cifsFileInf
>  		return rc;
>  	}
>  
> +	lock_flocks();
> +	cifs_for_each_lock(cfile->dentry->d_inode, before) {
> +		if ((*before)->fl_flags & FL_POSIX)
> +			count++;
> +	}
> +	unlock_flocks();
> +
>  	INIT_LIST_HEAD(&locks_to_send);
>  
> +	/*
> +	 * Allocating count locks is enough because no locks can be added to
> +	 * the list while we are holding cinode->lock_mutex that protects
> +	 * locking operations of this inode.
> +	 */
> +	for (; i < count; i++) {
> +		lck = kmalloc(sizeof(struct lock_to_push), GFP_KERNEL);
> +		if (!lck) {
> +			rc = -ENOMEM;
> +			goto err_out;
> +		}
> +		list_add_tail(&lck->llist, &locks_to_send);
> +	}
> +
> +	i = 0;
> +	el = locks_to_send.next;
>  	lock_flocks();
>  	cifs_for_each_lock(cfile->dentry->d_inode, before) {
> +		if (el == &locks_to_send) {
> +			/* something is really wrong */
> +			cERROR(1, "Can't push all brlocks!");
> +			break;
> +		}
>  		flock = *before;
> +		if ((flock->fl_flags & FL_POSIX) == 0)
> +			continue;
[...]

If I understand the logic correctly, el == &locks_to_send means we
already used all the lock_to_push structures.  (It should also be
equivalent to testing i == count.  Why is i incremented but not
otherwise used in the loop?)

But we test this before flock->fl_flags & FL_POSIX, which means we
don't know whether this lock actually needs to be assigned one of
those structures.  So it appears that we might report a spurious error
if the lock list ends with a mandatory lock.  If so, this is
relatively harmless but does need to be fixed.

Ben.

-- 
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
                                                              - Albert Camus

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [ 10/41] CIFS: Do not kmalloc under the flocks spinlock

[Pavel Shilovsky]

17 марта 2012 г. 6:37 пользователь Ben Hutchings <ben@decadent.org.uk> написал:
> On Fri, Mar 16, 2012 at 04:38:20PM -0700, Greg KH wrote:
>> 3.2-stable review patch.  If anyone has any objections, please let me know.
>>
>> ------------------
>>
>> From: Pavel Shilovsky <piastry@etersoft.ru>
>>
>> commit d5751469f210d2149cc2159ffff66cbeef6da3f2 upstream.
>>
>> Reorganize the code to make the memory already allocated before
>> spinlock'ed loop.
>>
>> Reviewed-by: Jeff Layton <jlayton@redhat.com>
>> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
>> Signed-off-by: Steve French <sfrench@us.ibm.com>
>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>
>> ---
>>  fs/cifs/file.c |   69 ++++++++++++++++++++++++++++++++++++++++++++++-----------
>>  1 file changed, 56 insertions(+), 13 deletions(-)
>>
>> --- a/fs/cifs/file.c
>> +++ b/fs/cifs/file.c
> [....]
>> @@ -940,29 +950,55 @@ cifs_push_posix_locks(struct cifsFileInf
>>               return rc;
>>       }
>>
>> +     lock_flocks();
>> +     cifs_for_each_lock(cfile->dentry->d_inode, before) {
>> +             if ((*before)->fl_flags & FL_POSIX)
>> +                     count++;
>> +     }
>> +     unlock_flocks();
>> +
>>       INIT_LIST_HEAD(&locks_to_send);
>>
>> +     /*
>> +      * Allocating count locks is enough because no locks can be added to
>> +      * the list while we are holding cinode->lock_mutex that protects
>> +      * locking operations of this inode.
>> +      */
>> +     for (; i < count; i++) {
>> +             lck = kmalloc(sizeof(struct lock_to_push), GFP_KERNEL);
>> +             if (!lck) {
>> +                     rc = -ENOMEM;
>> +                     goto err_out;
>> +             }
>> +             list_add_tail(&lck->llist, &locks_to_send);
>> +     }
>> +
>> +     i = 0;
>> +     el = locks_to_send.next;
>>       lock_flocks();
>>       cifs_for_each_lock(cfile->dentry->d_inode, before) {
>> +             if (el == &locks_to_send) {
>> +                     /* something is really wrong */
>> +                     cERROR(1, "Can't push all brlocks!");
>> +                     break;
>> +             }
>>               flock = *before;
>> +             if ((flock->fl_flags & FL_POSIX) == 0)
>> +                     continue;
> [...]
>
> If I understand the logic correctly, el == &locks_to_send means we
> already used all the lock_to_push structures.  (It should also be
> equivalent to testing i == count.  Why is i incremented but not
> otherwise used in the loop?)
>
> But we test this before flock->fl_flags & FL_POSIX, which means we
> don't know whether this lock actually needs to be assigned one of
> those structures.  So it appears that we might report a spurious error
> if the lock list ends with a mandatory lock.  If so, this is
> relatively harmless but does need to be fixed.
>

You are right here, thanks for the catch! I will repost the patch asap.

-- 
Best regards,
Pavel Shilovsky.

Re: [ 10/41] CIFS: Do not kmalloc under the flocks spinlock

[Pavel Shilovsky]

17 О©╫О©╫О©╫О©╫О©╫ 2012О©╫О©╫. 6:37 О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫ Ben Hutchings <ben@decadent.org.uk> О©╫О©╫О©╫О©╫О©╫О©╫О©╫:
> On Fri, Mar 16, 2012 at 04:38:20PM -0700, Greg KH wrote:
>> 3.2-stable review patch. О©╫If anyone has any objections, please let me know.
>>
>> ------------------
>>
>> From: Pavel Shilovsky <piastry@etersoft.ru>
>>
>> commit d5751469f210d2149cc2159ffff66cbeef6da3f2 upstream.
>>
>> Reorganize the code to make the memory already allocated before
>> spinlock'ed loop.
>>
>> Reviewed-by: Jeff Layton <jlayton@redhat.com>
>> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
>> Signed-off-by: Steve French <sfrench@us.ibm.com>
>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>
>> ---
>> О©╫fs/cifs/file.c | О©╫ 69 ++++++++++++++++++++++++++++++++++++++++++++++-----------
>> О©╫1 file changed, 56 insertions(+), 13 deletions(-)
>>
>> --- a/fs/cifs/file.c
>> +++ b/fs/cifs/file.c
> [....]
>> @@ -940,29 +950,55 @@ cifs_push_posix_locks(struct cifsFileInf
>> О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ return rc;
>> О©╫ О©╫ О©╫ }
>>
>> + О©╫ О©╫ lock_flocks();
>> + О©╫ О©╫ cifs_for_each_lock(cfile->dentry->d_inode, before) {
>> + О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ if ((*before)->fl_flags & FL_POSIX)
>> + О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ count++;
>> + О©╫ О©╫ }
>> + О©╫ О©╫ unlock_flocks();
>> +
>> О©╫ О©╫ О©╫ INIT_LIST_HEAD(&locks_to_send);
>>
>> + О©╫ О©╫ /*
>> + О©╫ О©╫ О©╫* Allocating count locks is enough because no locks can be added to
>> + О©╫ О©╫ О©╫* the list while we are holding cinode->lock_mutex that protects
>> + О©╫ О©╫ О©╫* locking operations of this inode.
>> + О©╫ О©╫ О©╫*/
>> + О©╫ О©╫ for (; i < count; i++) {
>> + О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ lck = kmalloc(sizeof(struct lock_to_push), GFP_KERNEL);
>> + О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ if (!lck) {
>> + О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ rc = -ENOMEM;
>> + О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ goto err_out;
>> + О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ }
>> + О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ list_add_tail(&lck->llist, &locks_to_send);
>> + О©╫ О©╫ }
>> +
>> + О©╫ О©╫ i = 0;
>> + О©╫ О©╫ el = locks_to_send.next;
>> О©╫ О©╫ О©╫ lock_flocks();
>> О©╫ О©╫ О©╫ cifs_for_each_lock(cfile->dentry->d_inode, before) {
>> + О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ if (el == &locks_to_send) {
>> + О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ /* something is really wrong */
>> + О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ cERROR(1, "Can't push all brlocks!");
>> + О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ break;
>> + О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ }
>> О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ flock = *before;
>> + О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ if ((flock->fl_flags & FL_POSIX) == 0)
>> + О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ О©╫ continue;
> [...]
>
> If I understand the logic correctly, el == &locks_to_send means we
> already used all the lock_to_push structures. О©╫(It should also be
> equivalent to testing i == count. О©╫Why is i incremented but not
> otherwise used in the loop?)
>
> But we test this before flock->fl_flags & FL_POSIX, which means we
> don't know whether this lock actually needs to be assigned one of
> those structures. О©╫So it appears that we might report a spurious error
> if the lock list ends with a mandatory lock. О©╫If so, this is
> relatively harmless but does need to be fixed.
>

You are right here, thanks for the catch! I will repost the patch asap.

-- 
Best regards,
Pavel Shilovsky.

Re: [ 10/41] CIFS: Do not kmalloc under the flocks spinlock

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 941 bytes --]

On Sat, 2012-03-17 at 10:14 +0400, Pavel Shilovsky wrote:
> 17 марта 2012 г. 6:37 пользователь Ben Hutchings <ben@decadent.org.uk> написал:
> > On Fri, Mar 16, 2012 at 04:38:20PM -0700, Greg KH wrote:
> >> 3.2-stable review patch.  If anyone has any objections, please let me know.
[...]
> > But we test this before flock->fl_flags & FL_POSIX, which means we
> > don't know whether this lock actually needs to be assigned one of
> > those structures.  So it appears that we might report a spurious error
> > if the lock list ends with a mandatory lock.  If so, this is
> > relatively harmless but does need to be fixed.
> >
> 
> You are right here, thanks for the catch! I will repost the patch asap.

This has already been merged into Linus's tree, so you need to submit a
patch to apply on top of it.

Ben.

-- 
Ben Hutchings
Life would be so much easier if we could look at the source code.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [ 10/41] CIFS: Do not kmalloc under the flocks spinlock

[Pavel Shilovsky]

17 марта 2012 г. 11:32 пользователь Ben Hutchings <ben@decadent.org.uk> написал:
> On Sat, 2012-03-17 at 10:14 +0400, Pavel Shilovsky wrote:
>> 17 марта 2012 г. 6:37 пользователь Ben Hutchings <ben@decadent.org.uk> написал:
>> > On Fri, Mar 16, 2012 at 04:38:20PM -0700, Greg KH wrote:
>> >> 3.2-stable review patch.  If anyone has any objections, please let me know.
> [...]
>> > But we test this before flock->fl_flags & FL_POSIX, which means we
>> > don't know whether this lock actually needs to be assigned one of
>> > those structures.  So it appears that we might report a spurious error
>> > if the lock list ends with a mandatory lock.  If so, this is
>> > relatively harmless but does need to be fixed.
>> >
>>
>> You are right here, thanks for the catch! I will repost the patch asap.
>
> This has already been merged into Linus's tree, so you need to submit a
> patch to apply on top of it.
>

I posted two patches:
1) the whole fixed version for the stable tree [PATCH v2] CIFS: Do not
kmalloc under the flocks spinlock
2) fixup for mainline [PATCH] CIFS: Fix a spurious error in
cifs_push_posix_locks

-- 
Best regards,
Pavel Shilovsky.

Re: [ 10/41] CIFS: Do not kmalloc under the flocks spinlock

[Pavel Shilovsky]

17 О©╫О©╫О©╫О©╫О©╫ 2012О©╫О©╫. 11:32 О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫ Ben Hutchings <ben@decadent.org.uk> О©╫О©╫О©╫О©╫О©╫О©╫О©╫:
> On Sat, 2012-03-17 at 10:14 +0400, Pavel Shilovsky wrote:
>> 17 О©╫О©╫О©╫О©╫О©╫ 2012 О©╫. 6:37 О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫ Ben Hutchings <ben@decadent.org.uk> О©╫О©╫О©╫О©╫О©╫О©╫О©╫:
>> > On Fri, Mar 16, 2012 at 04:38:20PM -0700, Greg KH wrote:
>> >> 3.2-stable review patch. О©╫If anyone has any objections, please let me know.
> [...]
>> > But we test this before flock->fl_flags & FL_POSIX, which means we
>> > don't know whether this lock actually needs to be assigned one of
>> > those structures. О©╫So it appears that we might report a spurious error
>> > if the lock list ends with a mandatory lock. О©╫If so, this is
>> > relatively harmless but does need to be fixed.
>> >
>>
>> You are right here, thanks for the catch! I will repost the patch asap.
>
> This has already been merged into Linus's tree, so you need to submit a
> patch to apply on top of it.
>

I posted two patches:
1) the whole fixed version for the stable tree [PATCH v2] CIFS: Do not
kmalloc under the flocks spinlock
2) fixup for mainline [PATCH] CIFS: Fix a spurious error in
cifs_push_posix_locks

-- 
Best regards,
Pavel Shilovsky.

Re: [ 10/41] CIFS: Do not kmalloc under the flocks spinlock

[Greg KH]

On Sat, Mar 17, 2012 at 11:52:24AM +0400, Pavel Shilovsky wrote:
> 17 марта 2012 г. 11:32 пользователь Ben Hutchings <ben@decadent.org.uk> написал:
> > On Sat, 2012-03-17 at 10:14 +0400, Pavel Shilovsky wrote:
> >> 17 марта 2012 г. 6:37 пользователь Ben Hutchings <ben@decadent.org.uk> написал:
> >> > On Fri, Mar 16, 2012 at 04:38:20PM -0700, Greg KH wrote:
> >> >> 3.2-stable review patch.  If anyone has any objections, please let me know.
> > [...]
> >> > But we test this before flock->fl_flags & FL_POSIX, which means we
> >> > don't know whether this lock actually needs to be assigned one of
> >> > those structures.  So it appears that we might report a spurious error
> >> > if the lock list ends with a mandatory lock.  If so, this is
> >> > relatively harmless but does need to be fixed.
> >> >
> >>
> >> You are right here, thanks for the catch! I will repost the patch asap.
> >
> > This has already been merged into Linus's tree, so you need to submit a
> > patch to apply on top of it.
> >
> 
> I posted two patches:
> 1) the whole fixed version for the stable tree [PATCH v2] CIFS: Do not
> kmalloc under the flocks spinlock

What do you mean by "fixed version"?

> 2) fixup for mainline [PATCH] CIFS: Fix a spurious error in
> cifs_push_posix_locks

What do you mean by this?

If there was a follow-on patch in Linus's tree that fixes a problem, I
need that git commit id, not a "fixed" patch that does not match up with
what is in Linus's tree right now.

So, if that's the case, please let me know what the git commit id of
that patch is please.

thanks,

greg k-h

Re: [ 10/41] CIFS: Do not kmalloc under the flocks spinlock

[Pavel Shilovsky]

19 марта 2012 г. 19:50 пользователь Greg KH
<gregkh@linuxfoundation.org> написал:
> On Sat, Mar 17, 2012 at 11:52:24AM +0400, Pavel Shilovsky wrote:
>> 17 марта 2012 г. 11:32 пользователь Ben Hutchings <ben@decadent.org.uk> написал:
>> > On Sat, 2012-03-17 at 10:14 +0400, Pavel Shilovsky wrote:
>> >> 17 марта 2012 г. 6:37 пользователь Ben Hutchings <ben@decadent.org.uk> написал:
>> >> > On Fri, Mar 16, 2012 at 04:38:20PM -0700, Greg KH wrote:
>> >> >> 3.2-stable review patch.  If anyone has any objections, please let me know.
>> > [...]
>> >> > But we test this before flock->fl_flags & FL_POSIX, which means we
>> >> > don't know whether this lock actually needs to be assigned one of
>> >> > those structures.  So it appears that we might report a spurious error
>> >> > if the lock list ends with a mandatory lock.  If so, this is
>> >> > relatively harmless but does need to be fixed.
>> >> >
>> >>
>> >> You are right here, thanks for the catch! I will repost the patch asap.
>> >
>> > This has already been merged into Linus's tree, so you need to submit a
>> > patch to apply on top of it.
>> >
>>
>> I posted two patches:
>> 1) the whole fixed version for the stable tree [PATCH v2] CIFS: Do not
>> kmalloc under the flocks spinlock
>
> What do you mean by "fixed version"?
>
>> 2) fixup for mainline [PATCH] CIFS: Fix a spurious error in
>> cifs_push_posix_locks
>
> What do you mean by this?

Ok, seems I didn't understand this process correctly. I reposted the
new "fixed" version of this patch, because I thought it is more
suitable for stale to merge one correct patch rather than one
incorrect + follow-on fixup. Sorry if I was wrong.

>
> If there was a follow-on patch in Linus's tree that fixes a problem, I
> need that git commit id, not a "fixed" patch that does not match up with
> what is in Linus's tree right now.
>
> So, if that's the case, please let me know what the git commit id of
> that patch is please.

Steve has just merged the follow-on patch:
http://git.samba.org/?p=sfrench/cifs-2.6.git;a=commit;h=ce85852b90a214cf577fc1b4f49d99fd7e98784a

but seems hasn't sent a merge request to Linus yet - will let you know
when the patch comes to Linus's tree.

-- 
Best regards,
Pavel Shilovsky.

Re: [ 10/41] CIFS: Do not kmalloc under the flocks spinlock

[Pavel Shilovsky]

19 О©╫О©╫О©╫О©╫О©╫ 2012О©╫О©╫. 19:50 О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫ Greg KH
<gregkh@linuxfoundation.org> О©╫О©╫О©╫О©╫О©╫О©╫О©╫:
> On Sat, Mar 17, 2012 at 11:52:24AM +0400, Pavel Shilovsky wrote:
>> 17 О©╫О©╫О©╫О©╫О©╫ 2012О©╫О©╫. 11:32 О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫ Ben Hutchings <ben@decadent.org.uk> О©╫О©╫О©╫О©╫О©╫О©╫О©╫:
>> > On Sat, 2012-03-17 at 10:14 +0400, Pavel Shilovsky wrote:
>> >> 17 О©╫О©╫О©╫О©╫О©╫ 2012 О©╫. 6:37 О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫О©╫ Ben Hutchings <ben@decadent.org.uk> О©╫О©╫О©╫О©╫О©╫О©╫О©╫:
>> >> > On Fri, Mar 16, 2012 at 04:38:20PM -0700, Greg KH wrote:
>> >> >> 3.2-stable review patch. О©╫If anyone has any objections, please let me know.
>> > [...]
>> >> > But we test this before flock->fl_flags & FL_POSIX, which means we
>> >> > don't know whether this lock actually needs to be assigned one of
>> >> > those structures. О©╫So it appears that we might report a spurious error
>> >> > if the lock list ends with a mandatory lock. О©╫If so, this is
>> >> > relatively harmless but does need to be fixed.
>> >> >
>> >>
>> >> You are right here, thanks for the catch! I will repost the patch asap.
>> >
>> > This has already been merged into Linus's tree, so you need to submit a
>> > patch to apply on top of it.
>> >
>>
>> I posted two patches:
>> 1) the whole fixed version for the stable tree [PATCH v2] CIFS: Do not
>> kmalloc under the flocks spinlock
>
> What do you mean by "fixed version"?
>
>> 2) fixup for mainline [PATCH] CIFS: Fix a spurious error in
>> cifs_push_posix_locks
>
> What do you mean by this?

Ok, seems I didn't understand this process correctly. I reposted the
new "fixed" version of this patch, because I thought it is more
suitable for stale to merge one correct patch rather than one
incorrect + follow-on fixup. Sorry if I was wrong.

>
> If there was a follow-on patch in Linus's tree that fixes a problem, I
> need that git commit id, not a "fixed" patch that does not match up with
> what is in Linus's tree right now.
>
> So, if that's the case, please let me know what the git commit id of
> that patch is please.

Steve has just merged the follow-on patch:
http://git.samba.org/?p=sfrench/cifs-2.6.git;a=commit;h=ce85852b90a214cf577fc1b4f49d99fd7e98784a

but seems hasn't sent a merge request to Linus yet - will let you know
when the patch comes to Linus's tree.

-- 
Best regards,
Pavel Shilovsky.

Re: [ 10/41] CIFS: Do not kmalloc under the flocks spinlock

[Greg KH]

On Mon, Mar 19, 2012 at 11:11:35PM +0400, Pavel Shilovsky wrote:
> 19 марта 2012 г. 19:50 пользователь Greg KH
> <gregkh@linuxfoundation.org> написал:
> > On Sat, Mar 17, 2012 at 11:52:24AM +0400, Pavel Shilovsky wrote:
> >> 17 марта 2012 г. 11:32 пользователь Ben Hutchings <ben@decadent.org.uk> написал:
> >> > On Sat, 2012-03-17 at 10:14 +0400, Pavel Shilovsky wrote:
> >> >> 17 марта 2012 г. 6:37 пользователь Ben Hutchings <ben@decadent.org.uk> написал:
> >> >> > On Fri, Mar 16, 2012 at 04:38:20PM -0700, Greg KH wrote:
> >> >> >> 3.2-stable review patch.  If anyone has any objections, please let me know.
> >> > [...]
> >> >> > But we test this before flock->fl_flags & FL_POSIX, which means we
> >> >> > don't know whether this lock actually needs to be assigned one of
> >> >> > those structures.  So it appears that we might report a spurious error
> >> >> > if the lock list ends with a mandatory lock.  If so, this is
> >> >> > relatively harmless but does need to be fixed.
> >> >> >
> >> >>
> >> >> You are right here, thanks for the catch! I will repost the patch asap.
> >> >
> >> > This has already been merged into Linus's tree, so you need to submit a
> >> > patch to apply on top of it.
> >> >
> >>
> >> I posted two patches:
> >> 1) the whole fixed version for the stable tree [PATCH v2] CIFS: Do not
> >> kmalloc under the flocks spinlock
> >
> > What do you mean by "fixed version"?
> >
> >> 2) fixup for mainline [PATCH] CIFS: Fix a spurious error in
> >> cifs_push_posix_locks
> >
> > What do you mean by this?
> 
> Ok, seems I didn't understand this process correctly. I reposted the
> new "fixed" version of this patch, because I thought it is more
> suitable for stale to merge one correct patch rather than one
> incorrect + follow-on fixup. Sorry if I was wrong.

I need to stay identical with Linus's tree as much as possible, it's
easier for everyone in the end that way for tracking exactly what
happens.

> > If there was a follow-on patch in Linus's tree that fixes a problem, I
> > need that git commit id, not a "fixed" patch that does not match up with
> > what is in Linus's tree right now.
> >
> > So, if that's the case, please let me know what the git commit id of
> > that patch is please.
> 
> Steve has just merged the follow-on patch:
> http://git.samba.org/?p=sfrench/cifs-2.6.git;a=commit;h=ce85852b90a214cf577fc1b4f49d99fd7e98784a
> 
> but seems hasn't sent a merge request to Linus yet - will let you know
> when the patch comes to Linus's tree.

Ok, please let me know when this goes into Linus's tree and I will
queue it up for the next releases.

thanks,

greg k-h

Re: [ 10/41] CIFS: Do not kmalloc under the flocks spinlock

[Greg KH]

On Mon, Mar 19, 2012 at 12:24:16PM -0700, Greg KH wrote:
> On Mon, Mar 19, 2012 at 11:11:35PM +0400, Pavel Shilovsky wrote:
> > 19 марта 2012 г. 19:50 пользователь Greg KH
> > <gregkh@linuxfoundation.org> написал:
> > > On Sat, Mar 17, 2012 at 11:52:24AM +0400, Pavel Shilovsky wrote:
> > >> 17 марта 2012 г. 11:32 пользователь Ben Hutchings <ben@decadent.org.uk> написал:
> > >> > On Sat, 2012-03-17 at 10:14 +0400, Pavel Shilovsky wrote:
> > >> >> 17 марта 2012 г. 6:37 пользователь Ben Hutchings <ben@decadent.org.uk> написал:
> > >> >> > On Fri, Mar 16, 2012 at 04:38:20PM -0700, Greg KH wrote:
> > >> >> >> 3.2-stable review patch.  If anyone has any objections, please let me know.
> > >> > [...]
> > >> >> > But we test this before flock->fl_flags & FL_POSIX, which means we
> > >> >> > don't know whether this lock actually needs to be assigned one of
> > >> >> > those structures.  So it appears that we might report a spurious error
> > >> >> > if the lock list ends with a mandatory lock.  If so, this is
> > >> >> > relatively harmless but does need to be fixed.
> > >> >> >
> > >> >>
> > >> >> You are right here, thanks for the catch! I will repost the patch asap.
> > >> >
> > >> > This has already been merged into Linus's tree, so you need to submit a
> > >> > patch to apply on top of it.
> > >> >
> > >>
> > >> I posted two patches:
> > >> 1) the whole fixed version for the stable tree [PATCH v2] CIFS: Do not
> > >> kmalloc under the flocks spinlock
> > >
> > > What do you mean by "fixed version"?
> > >
> > >> 2) fixup for mainline [PATCH] CIFS: Fix a spurious error in
> > >> cifs_push_posix_locks
> > >
> > > What do you mean by this?
> > 
> > Ok, seems I didn't understand this process correctly. I reposted the
> > new "fixed" version of this patch, because I thought it is more
> > suitable for stale to merge one correct patch rather than one
> > incorrect + follow-on fixup. Sorry if I was wrong.
> 
> I need to stay identical with Linus's tree as much as possible, it's
> easier for everyone in the end that way for tracking exactly what
> happens.
> 
> > > If there was a follow-on patch in Linus's tree that fixes a problem, I
> > > need that git commit id, not a "fixed" patch that does not match up with
> > > what is in Linus's tree right now.
> > >
> > > So, if that's the case, please let me know what the git commit id of
> > > that patch is please.
> > 
> > Steve has just merged the follow-on patch:
> > http://git.samba.org/?p=sfrench/cifs-2.6.git;a=commit;h=ce85852b90a214cf577fc1b4f49d99fd7e98784a
> > 
> > but seems hasn't sent a merge request to Linus yet - will let you know
> > when the patch comes to Linus's tree.
> 
> Ok, please let me know when this goes into Linus's tree and I will
> queue it up for the next releases.

It's there now, I've picked it up.

greg k-h

[ 11/41] vfs: fix return value from do_last()

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <mszeredi@suse.cz>

commit 7f6c7e62fcc123e6bd9206da99a2163fe3facc31 upstream.

complete_walk() returns either ECHILD or ESTALE.  do_last() turns this into
ECHILD unconditionally.  If not in RCU mode, this error will reach userspace
which is complete nonsense.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/namei.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2139,7 +2139,7 @@ static struct file *do_last(struct namei
 		/* sayonara */
 		error = complete_walk(nd);
 		if (error)
-			return ERR_PTR(-ECHILD);
+			return ERR_PTR(error);
 
 		error = -ENOTDIR;
 		if (nd->flags & LOOKUP_DIRECTORY) {

[ 12/41] vfs: fix double put after complete_walk()

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <mszeredi@suse.cz>

commit 097b180ca09b581ef0dc24fbcfc1b227de3875df upstream.

complete_walk() already puts nd->path, no need to do it again at cleanup time.

This would result in Oopses if triggered, apparently the codepath is not too
well exercised.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/namei.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2238,7 +2238,7 @@ static struct file *do_last(struct namei
 	/* Why this, you ask?  _Now_ we might have grown LOOKUP_JUMPED... */
 	error = complete_walk(nd);
 	if (error)
-		goto exit;
+		return ERR_PTR(error);
 	error = -EISDIR;
 	if (S_ISDIR(nd->inode->i_mode))
 		goto exit;

[ 13/41] acer-wmi: No wifi rfkill on Lenovo machines

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ike Panhc <ike.pan@canonical.com>

commit 461e74377cfcfc2c0d6bbdfa8fc5fbc21b052c2a upstream.

We have several reports which says acer-wmi is loaded on ideapads
and register rfkill for wifi which can not be unblocked.

Since ideapad-laptop also register rfkill for wifi and it works
reliably, it will be fine acer-wmi is not going to register rfkill
for wifi once VPC2004 is found.

Also put IBM0068/LEN0068 in the list. Though thinkpad_acpi has no
wifi rfkill capability, there are reports which says acer-wmi also
block wireless on Thinkpad E520/E420.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/platform/x86/acer-wmi.c |   30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -679,6 +679,32 @@ static acpi_status AMW0_find_mailled(voi
 	return AE_OK;
 }
 
+static int AMW0_set_cap_acpi_check_device_found;
+
+static acpi_status AMW0_set_cap_acpi_check_device_cb(acpi_handle handle,
+	u32 level, void *context, void **retval)
+{
+	AMW0_set_cap_acpi_check_device_found = 1;
+	return AE_OK;
+}
+
+static const struct acpi_device_id norfkill_ids[] = {
+	{ "VPC2004", 0},
+	{ "IBM0068", 0},
+	{ "LEN0068", 0},
+	{ "", 0},
+};
+
+static int AMW0_set_cap_acpi_check_device(void)
+{
+	const struct acpi_device_id *id;
+
+	for (id = norfkill_ids; id->id[0]; id++)
+		acpi_get_devices(id->id, AMW0_set_cap_acpi_check_device_cb,
+				NULL, NULL);
+	return AMW0_set_cap_acpi_check_device_found;
+}
+
 static acpi_status AMW0_set_capabilities(void)
 {
 	struct wmab_args args;
@@ -692,7 +718,9 @@ static acpi_status AMW0_set_capabilities
 	 * work.
 	 */
 	if (wmi_has_guid(AMW0_GUID2)) {
-		interface->capability |= ACER_CAP_WIRELESS;
+		if ((quirks != &quirk_unknown) ||
+		    !AMW0_set_cap_acpi_check_device())
+			interface->capability |= ACER_CAP_WIRELESS;
 		return AE_OK;
 	}
 

[ 14/41] atl1c: dont use highprio tx queue

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Eric Dumazet <eric.dumazet@gmail.com>

[ Upstream commit 11aad99af6ef629ff3b05d1c9f0936589b204316 ]

This driver attempts to use two TX rings but lacks proper support :

1) IRQ handler only takes care of TX completion on first TX ring
2) the stop/start logic uses the legacy functions (for non multiqueue
drivers)

This means all packets witk skb mark set to 1 are sent through high
queue but are never cleaned and queue eventualy fills and block the
device, triggering the infamous "NETDEV WATCHDOG" message.

Lets use a single TX ring to fix the problem, this driver is not a real
multiqueue one yet.

Minimal fix for stable kernels.

Reported-by: Thomas Meyer <thomas@m3y3r.de>
Tested-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Chris Snook <chris.snook@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/atheros/atl1c/atl1c_main.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -2241,10 +2241,6 @@ static netdev_tx_t atl1c_xmit_frame(stru
 			dev_info(&adapter->pdev->dev, "tx locked\n");
 		return NETDEV_TX_LOCKED;
 	}
-	if (skb->mark == 0x01)
-		type = atl1c_trans_high;
-	else
-		type = atl1c_trans_normal;
 
 	if (atl1c_tpd_avail(adapter, type) < tpd_req) {
 		/* no enough descriptor, just stop queue */

[ 15/41] neighbour: Fixed race condition at tbl->nht

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Michel Machado <michel@digirati.com.br>

[ Upstream commit 84338a6c9dbb6ff3de4749864020f8f25d86fc81 ]

When the fixed race condition happens:

1. While function neigh_periodic_work scans the neighbor hash table
pointed by field tbl->nht, it unlocks and locks tbl->lock between
buckets in order to call cond_resched.

2. Assume that function neigh_periodic_work calls cond_resched, that is,
the lock tbl->lock is available, and function neigh_hash_grow runs.

3. Once function neigh_hash_grow finishes, and RCU calls
neigh_hash_free_rcu, the original struct neigh_hash_table that function
neigh_periodic_work was using doesn't exist anymore.

4. Once back at neigh_periodic_work, whenever the old struct
neigh_hash_table is accessed, things can go badly.

Signed-off-by: Michel Machado <michel@digirati.com.br>
CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/neighbour.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -802,6 +802,8 @@ next_elt:
 		write_unlock_bh(&tbl->lock);
 		cond_resched();
 		write_lock_bh(&tbl->lock);
+		nht = rcu_dereference_protected(tbl->nht,
+						lockdep_is_held(&tbl->lock));
 	}
 	/* Cycle through all hash buckets every base_reachable_time/2 ticks.
 	 * ARP entry timeouts range from 1/2 base_reachable_time to 3/2

[ 16/41] ipsec: be careful of non existing mac headers

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 3919 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Eric Dumazet <eric.dumazet@gmail.com>

[ Upstream commit 03606895cd98c0a628b17324fd7b5ff15db7e3cd ]

Niccolo Belli reported ipsec crashes in case we handle a frame without
mac header (atm in his case)

Before copying mac header, better make sure it is present.

Bugzilla reference:  https://bugzilla.kernel.org/show_bug.cgi?id=42809

Reported-by: Niccolò Belli <darkbasic@linuxsystems.it>
Tested-by: Niccolò Belli <darkbasic@linuxsystems.it>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/skbuff.h       |   10 ++++++++++
 net/ipv4/xfrm4_mode_beet.c   |    5 +----
 net/ipv4/xfrm4_mode_tunnel.c |    6 ++----
 net/ipv6/xfrm6_mode_beet.c   |    6 +-----
 net/ipv6/xfrm6_mode_tunnel.c |    6 ++----
 5 files changed, 16 insertions(+), 17 deletions(-)

--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1453,6 +1453,16 @@ static inline void skb_set_mac_header(st
 }
 #endif /* NET_SKBUFF_DATA_USES_OFFSET */
 
+static inline void skb_mac_header_rebuild(struct sk_buff *skb)
+{
+	if (skb_mac_header_was_set(skb)) {
+		const unsigned char *old_mac = skb_mac_header(skb);
+
+		skb_set_mac_header(skb, -skb->mac_len);
+		memmove(skb_mac_header(skb), old_mac, skb->mac_len);
+	}
+}
+
 static inline int skb_checksum_start_offset(const struct sk_buff *skb)
 {
 	return skb->csum_start - skb_headroom(skb);
--- a/net/ipv4/xfrm4_mode_beet.c
+++ b/net/ipv4/xfrm4_mode_beet.c
@@ -110,10 +110,7 @@ static int xfrm4_beet_input(struct xfrm_
 
 	skb_push(skb, sizeof(*iph));
 	skb_reset_network_header(skb);
-
-	memmove(skb->data - skb->mac_len, skb_mac_header(skb),
-		skb->mac_len);
-	skb_set_mac_header(skb, -skb->mac_len);
+	skb_mac_header_rebuild(skb);
 
 	xfrm4_beet_make_header(skb);
 
--- a/net/ipv4/xfrm4_mode_tunnel.c
+++ b/net/ipv4/xfrm4_mode_tunnel.c
@@ -66,7 +66,6 @@ static int xfrm4_mode_tunnel_output(stru
 
 static int xfrm4_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb)
 {
-	const unsigned char *old_mac;
 	int err = -EINVAL;
 
 	if (XFRM_MODE_SKB_CB(skb)->protocol != IPPROTO_IPIP)
@@ -84,10 +83,9 @@ static int xfrm4_mode_tunnel_input(struc
 	if (!(x->props.flags & XFRM_STATE_NOECN))
 		ipip_ecn_decapsulate(skb);
 
-	old_mac = skb_mac_header(skb);
-	skb_set_mac_header(skb, -skb->mac_len);
-	memmove(skb_mac_header(skb), old_mac, skb->mac_len);
 	skb_reset_network_header(skb);
+	skb_mac_header_rebuild(skb);
+
 	err = 0;
 
 out:
--- a/net/ipv6/xfrm6_mode_beet.c
+++ b/net/ipv6/xfrm6_mode_beet.c
@@ -80,7 +80,6 @@ static int xfrm6_beet_output(struct xfrm
 static int xfrm6_beet_input(struct xfrm_state *x, struct sk_buff *skb)
 {
 	struct ipv6hdr *ip6h;
-	const unsigned char *old_mac;
 	int size = sizeof(struct ipv6hdr);
 	int err;
 
@@ -90,10 +89,7 @@ static int xfrm6_beet_input(struct xfrm_
 
 	__skb_push(skb, size);
 	skb_reset_network_header(skb);
-
-	old_mac = skb_mac_header(skb);
-	skb_set_mac_header(skb, -skb->mac_len);
-	memmove(skb_mac_header(skb), old_mac, skb->mac_len);
+	skb_mac_header_rebuild(skb);
 
 	xfrm6_beet_make_header(skb);
 
--- a/net/ipv6/xfrm6_mode_tunnel.c
+++ b/net/ipv6/xfrm6_mode_tunnel.c
@@ -63,7 +63,6 @@ static int xfrm6_mode_tunnel_output(stru
 static int xfrm6_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb)
 {
 	int err = -EINVAL;
-	const unsigned char *old_mac;
 
 	if (XFRM_MODE_SKB_CB(skb)->protocol != IPPROTO_IPV6)
 		goto out;
@@ -80,10 +79,9 @@ static int xfrm6_mode_tunnel_input(struc
 	if (!(x->props.flags & XFRM_STATE_NOECN))
 		ipip6_ecn_decapsulate(skb);
 
-	old_mac = skb_mac_header(skb);
-	skb_set_mac_header(skb, -skb->mac_len);
-	memmove(skb_mac_header(skb), old_mac, skb->mac_len);
 	skb_reset_network_header(skb);
+	skb_mac_header_rebuild(skb);
+
 	err = 0;
 
 out:

[ 16/41] ipsec: be careful of non existing mac headers

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 3923 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Eric Dumazet <eric.dumazet@gmail.com>

[ Upstream commit 03606895cd98c0a628b17324fd7b5ff15db7e3cd ]

Niccolo Belli reported ipsec crashes in case we handle a frame without
mac header (atm in his case)

Before copying mac header, better make sure it is present.

Bugzilla reference:  https://bugzilla.kernel.org/show_bug.cgi?id=42809

Reported-by: Niccol� Belli <darkbasic@linuxsystems.it>
Tested-by: Niccol� Belli <darkbasic@linuxsystems.it>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/skbuff.h       |   10 ++++++++++
 net/ipv4/xfrm4_mode_beet.c   |    5 +----
 net/ipv4/xfrm4_mode_tunnel.c |    6 ++----
 net/ipv6/xfrm6_mode_beet.c   |    6 +-----
 net/ipv6/xfrm6_mode_tunnel.c |    6 ++----
 5 files changed, 16 insertions(+), 17 deletions(-)

--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1453,6 +1453,16 @@ static inline void skb_set_mac_header(st
 }
 #endif /* NET_SKBUFF_DATA_USES_OFFSET */
 
+static inline void skb_mac_header_rebuild(struct sk_buff *skb)
+{
+	if (skb_mac_header_was_set(skb)) {
+		const unsigned char *old_mac = skb_mac_header(skb);
+
+		skb_set_mac_header(skb, -skb->mac_len);
+		memmove(skb_mac_header(skb), old_mac, skb->mac_len);
+	}
+}
+
 static inline int skb_checksum_start_offset(const struct sk_buff *skb)
 {
 	return skb->csum_start - skb_headroom(skb);
--- a/net/ipv4/xfrm4_mode_beet.c
+++ b/net/ipv4/xfrm4_mode_beet.c
@@ -110,10 +110,7 @@ static int xfrm4_beet_input(struct xfrm_
 
 	skb_push(skb, sizeof(*iph));
 	skb_reset_network_header(skb);
-
-	memmove(skb->data - skb->mac_len, skb_mac_header(skb),
-		skb->mac_len);
-	skb_set_mac_header(skb, -skb->mac_len);
+	skb_mac_header_rebuild(skb);
 
 	xfrm4_beet_make_header(skb);
 
--- a/net/ipv4/xfrm4_mode_tunnel.c
+++ b/net/ipv4/xfrm4_mode_tunnel.c
@@ -66,7 +66,6 @@ static int xfrm4_mode_tunnel_output(stru
 
 static int xfrm4_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb)
 {
-	const unsigned char *old_mac;
 	int err = -EINVAL;
 
 	if (XFRM_MODE_SKB_CB(skb)->protocol != IPPROTO_IPIP)
@@ -84,10 +83,9 @@ static int xfrm4_mode_tunnel_input(struc
 	if (!(x->props.flags & XFRM_STATE_NOECN))
 		ipip_ecn_decapsulate(skb);
 
-	old_mac = skb_mac_header(skb);
-	skb_set_mac_header(skb, -skb->mac_len);
-	memmove(skb_mac_header(skb), old_mac, skb->mac_len);
 	skb_reset_network_header(skb);
+	skb_mac_header_rebuild(skb);
+
 	err = 0;
 
 out:
--- a/net/ipv6/xfrm6_mode_beet.c
+++ b/net/ipv6/xfrm6_mode_beet.c
@@ -80,7 +80,6 @@ static int xfrm6_beet_output(struct xfrm
 static int xfrm6_beet_input(struct xfrm_state *x, struct sk_buff *skb)
 {
 	struct ipv6hdr *ip6h;
-	const unsigned char *old_mac;
 	int size = sizeof(struct ipv6hdr);
 	int err;
 
@@ -90,10 +89,7 @@ static int xfrm6_beet_input(struct xfrm_
 
 	__skb_push(skb, size);
 	skb_reset_network_header(skb);
-
-	old_mac = skb_mac_header(skb);
-	skb_set_mac_header(skb, -skb->mac_len);
-	memmove(skb_mac_header(skb), old_mac, skb->mac_len);
+	skb_mac_header_rebuild(skb);
 
 	xfrm6_beet_make_header(skb);
 
--- a/net/ipv6/xfrm6_mode_tunnel.c
+++ b/net/ipv6/xfrm6_mode_tunnel.c
@@ -63,7 +63,6 @@ static int xfrm6_mode_tunnel_output(stru
 static int xfrm6_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb)
 {
 	int err = -EINVAL;
-	const unsigned char *old_mac;
 
 	if (XFRM_MODE_SKB_CB(skb)->protocol != IPPROTO_IPV6)
 		goto out;
@@ -80,10 +79,9 @@ static int xfrm6_mode_tunnel_input(struc
 	if (!(x->props.flags & XFRM_STATE_NOECN))
 		ipip6_ecn_decapsulate(skb);
 
-	old_mac = skb_mac_header(skb);
-	skb_set_mac_header(skb, -skb->mac_len);
-	memmove(skb_mac_header(skb), old_mac, skb->mac_len);
 	skb_reset_network_header(skb);
+	skb_mac_header_rebuild(skb);
+
 	err = 0;
 
 out:

[ 17/41] ppp: fix ppp_mp_reconstruct bad seq errors

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Ben McKeegan <ben@netservers.co.uk>

[ Upstream commit 8a49ad6e89feb5015e77ce6efeb2678947117e20 ]

This patch fixes a (mostly cosmetic) bug introduced by the patch
'ppp: Use SKB queue abstraction interfaces in fragment processing'
found here: http://www.spinics.net/lists/netdev/msg153312.html

The above patch rewrote and moved the code responsible for cleaning
up discarded fragments but the new code does not catch every case
where this is necessary.  This results in some discarded fragments
remaining in the queue, and triggering a 'bad seq' error on the
subsequent call to ppp_mp_reconstruct.  Fragments are discarded
whenever other fragments of the same frame have been lost.
This can generate a lot of unwanted and misleading log messages.

This patch also adds additional detail to the debug logging to
make it clearer which fragments were lost and which other fragments
were discarded as a result of losses. (Run pppd with 'kdebug 1'
option to enable debug logging.)

Signed-off-by: Ben McKeegan <ben@netservers.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ppp/ppp_generic.c |   23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -2024,14 +2024,22 @@ ppp_mp_reconstruct(struct ppp *ppp)
 			continue;
 		}
 		if (PPP_MP_CB(p)->sequence != seq) {
+			u32 oldseq;
 			/* Fragment `seq' is missing.  If it is after
 			   minseq, it might arrive later, so stop here. */
 			if (seq_after(seq, minseq))
 				break;
 			/* Fragment `seq' is lost, keep going. */
 			lost = 1;
+			oldseq = seq;
 			seq = seq_before(minseq, PPP_MP_CB(p)->sequence)?
 				minseq + 1: PPP_MP_CB(p)->sequence;
+
+			if (ppp->debug & 1)
+				netdev_printk(KERN_DEBUG, ppp->dev,
+					      "lost frag %u..%u\n",
+					      oldseq, seq-1);
+
 			goto again;
 		}
 
@@ -2076,6 +2084,10 @@ ppp_mp_reconstruct(struct ppp *ppp)
 			struct sk_buff *tmp2;
 
 			skb_queue_reverse_walk_from_safe(list, p, tmp2) {
+				if (ppp->debug & 1)
+					netdev_printk(KERN_DEBUG, ppp->dev,
+						      "discarding frag %u\n",
+						      PPP_MP_CB(p)->sequence);
 				__skb_unlink(p, list);
 				kfree_skb(p);
 			}
@@ -2091,6 +2103,17 @@ ppp_mp_reconstruct(struct ppp *ppp)
 		/* If we have discarded any fragments,
 		   signal a receive error. */
 		if (PPP_MP_CB(head)->sequence != ppp->nextseq) {
+			skb_queue_walk_safe(list, p, tmp) {
+				if (p == head)
+					break;
+				if (ppp->debug & 1)
+					netdev_printk(KERN_DEBUG, ppp->dev,
+						      "discarding frag %u\n",
+						      PPP_MP_CB(p)->sequence);
+				__skb_unlink(p, list);
+				kfree_skb(p);
+			}
+
 			if (ppp->debug & 1)
 				netdev_printk(KERN_DEBUG, ppp->dev,
 					      "  missed pkts %u..%u\n",

[ 18/41] sfc: Fix assignment of ip_summed for pre-allocated skbs

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Ben Hutchings <bhutchings@solarflare.com>

[ Upstream commit ff3bc1e7527504a93710535611b2f812f3bb89bf ]

When pre-allocating skbs for received packets, we set ip_summed =
CHECKSUM_UNNCESSARY.  We used to change it back to CHECKSUM_NONE when
the received packet had an incorrect checksum or unhandled protocol.

Commit bc8acf2c8c3e43fcc192762a9f964b3e9a17748b ('drivers/net: avoid
some skb->ip_summed initializations') mistakenly replaced the latter
assignment with a DEBUG-only assertion that ip_summed ==
CHECKSUM_NONE.  This assertion is always false, but it seems no-one
has exercised this code path in a DEBUG build.

Fix this by moving our assignment of CHECKSUM_UNNECESSARY into
efx_rx_packet_gro().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/sfc/rx.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/sfc/rx.c
+++ b/drivers/net/ethernet/sfc/rx.c
@@ -156,11 +156,10 @@ static int efx_init_rx_buffers_skb(struc
 		if (unlikely(!skb))
 			return -ENOMEM;
 
-		/* Adjust the SKB for padding and checksum */
+		/* Adjust the SKB for padding */
 		skb_reserve(skb, NET_IP_ALIGN);
 		rx_buf->len = skb_len - NET_IP_ALIGN;
 		rx_buf->is_page = false;
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
 		rx_buf->dma_addr = pci_map_single(efx->pci_dev,
 						  skb->data, rx_buf->len,
@@ -499,6 +498,7 @@ static void efx_rx_packet_gro(struct efx
 
 		EFX_BUG_ON_PARANOID(!checksummed);
 		rx_buf->u.skb = NULL;
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
 		gro_result = napi_gro_receive(napi, skb);
 	}

[ 19/41] tcp: fix false reordering signal in tcp_shifted_skb

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Neal Cardwell <ncardwell@google.com>

[ Upstream commit 4c90d3b30334833450ccbb02f452d4972a3c3c3f ]

When tcp_shifted_skb() shifts bytes from the skb that is currently
pointed to by 'highest_sack' then the increment of
TCP_SKB_CB(skb)->seq implicitly advances tcp_highest_sack_seq(). This
implicit advancement, combined with the recent fix to pass the correct
SACKed range into tcp_sacktag_one(), caused tcp_sacktag_one() to think
that the newly SACKed range was before the tcp_highest_sack_seq(),
leading to a call to tcp_update_reordering() with a degree of
reordering matching the size of the newly SACKed range (typically just
1 packet, which is a NOP, but potentially larger).

This commit fixes this by simply calling tcp_sacktag_one() before the
TCP_SKB_CB(skb)->seq advancement that can advance our notion of the
highest SACKed sequence.

Correspondingly, we can simplify the code a little now that
tcp_shifted_skb() should update the lost_cnt_hint in all cases where
skb == tp->lost_skb_hint.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |   18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1406,8 +1406,16 @@ static int tcp_shifted_skb(struct sock *
 
 	BUG_ON(!pcount);
 
-	/* Adjust hint for FACK. Non-FACK is handled in tcp_sacktag_one(). */
-	if (tcp_is_fack(tp) && (skb == tp->lost_skb_hint))
+	/* Adjust counters and hints for the newly sacked sequence
+	 * range but discard the return value since prev is already
+	 * marked. We must tag the range first because the seq
+	 * advancement below implicitly advances
+	 * tcp_highest_sack_seq() when skb is highest_sack.
+	 */
+	tcp_sacktag_one(sk, state, TCP_SKB_CB(skb)->sacked,
+			start_seq, end_seq, dup_sack, pcount);
+
+	if (skb == tp->lost_skb_hint)
 		tp->lost_cnt_hint += pcount;
 
 	TCP_SKB_CB(prev)->end_seq += shifted;
@@ -1433,12 +1441,6 @@ static int tcp_shifted_skb(struct sock *
 		skb_shinfo(skb)->gso_type = 0;
 	}
 
-	/* Adjust counters and hints for the newly sacked sequence range but
-	 * discard the return value since prev is already marked.
-	 */
-	tcp_sacktag_one(sk, state, TCP_SKB_CB(skb)->sacked,
-			start_seq, end_seq, dup_sack, pcount);
-
 	/* Difference in this won't matter, both ACKed by the same cumul. ACK */
 	TCP_SKB_CB(prev)->sacked |= (TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS);
 

[ 20/41] vmxnet3: Fix transport header size

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Shreyas Bhatewara <sbhatewara@vmware.com>

[ Upstream commit efead8710aad9e384730ecf25eae0287878840d7 ]

Fix transport header size

Fix the transpoert header size for UDP packets.

Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/vmxnet3/vmxnet3_drv.c |    7 +------
 drivers/net/vmxnet3/vmxnet3_int.h |    4 ++--
 2 files changed, 3 insertions(+), 8 deletions(-)

--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -830,13 +830,8 @@ vmxnet3_parse_and_copy_hdr(struct sk_buf
 					ctx->l4_hdr_size = ((struct tcphdr *)
 					   skb_transport_header(skb))->doff * 4;
 				else if (iph->protocol == IPPROTO_UDP)
-					/*
-					 * Use tcp header size so that bytes to
-					 * be copied are more than required by
-					 * the device.
-					 */
 					ctx->l4_hdr_size =
-							sizeof(struct tcphdr);
+							sizeof(struct udphdr);
 				else
 					ctx->l4_hdr_size = 0;
 			} else {
--- a/drivers/net/vmxnet3/vmxnet3_int.h
+++ b/drivers/net/vmxnet3/vmxnet3_int.h
@@ -70,10 +70,10 @@
 /*
  * Version numbers
  */
-#define VMXNET3_DRIVER_VERSION_STRING   "1.1.18.0-k"
+#define VMXNET3_DRIVER_VERSION_STRING   "1.1.29.0-k"
 
 /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
-#define VMXNET3_DRIVER_VERSION_NUM      0x01011200
+#define VMXNET3_DRIVER_VERSION_NUM      0x01011D00
 
 #if defined(CONFIG_PCI_MSI)
 	/* RSS only makes sense if MSI-X is supported. */

[ 21/41] packetengines: fix config default

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------


From: stephen hemminger <shemminger@vyatta.com>

[ Upstream commit 3f2010b2ad3d66d5291497c9b274315e7b807ecd ]

As part of the big network driver reorg, each vendor directory defaults to
yes, so that older config's can migrate correctly. Looks like this one
got missed.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/packetengines/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/packetengines/Kconfig
+++ b/drivers/net/ethernet/packetengines/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_PACKET_ENGINE
 	bool "Packet Engine devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

[ 22/41] r8169: corrupted IP fragments fix for large mtu.

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1362 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------


From: françois romieu <romieu@fr.zoreil.com>

[ Upstream commit 9c5028e9da1255dd2b99762d8627b88b29f68cce ]

Noticed with the 8168d (-vb-gr, aka RTL_GIGA_MAC_VER_26).

ConfigX registers should only be written while the Config9346 lock
is held.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Reported-by: Nick Bowler <nbowler@elliptictech.com>
Cc: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/realtek/r8169.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -3781,12 +3781,20 @@ static void rtl8169_init_ring_indexes(st
 
 static void rtl_hw_jumbo_enable(struct rtl8169_private *tp)
 {
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	RTL_W8(Cfg9346, Cfg9346_Unlock);
 	rtl_generic_op(tp, tp->jumbo_ops.enable);
+	RTL_W8(Cfg9346, Cfg9346_Lock);
 }
 
 static void rtl_hw_jumbo_disable(struct rtl8169_private *tp)
 {
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	RTL_W8(Cfg9346, Cfg9346_Unlock);
 	rtl_generic_op(tp, tp->jumbo_ops.disable);
+	RTL_W8(Cfg9346, Cfg9346_Lock);
 }
 
 static void r8168c_hw_jumbo_enable(struct rtl8169_private *tp)

[ 22/41] r8169: corrupted IP fragments fix for large mtu.

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1364 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------


From: fran�ois romieu <romieu@fr.zoreil.com>

[ Upstream commit 9c5028e9da1255dd2b99762d8627b88b29f68cce ]

Noticed with the 8168d (-vb-gr, aka RTL_GIGA_MAC_VER_26).

ConfigX registers should only be written while the Config9346 lock
is held.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Reported-by: Nick Bowler <nbowler@elliptictech.com>
Cc: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/realtek/r8169.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -3781,12 +3781,20 @@ static void rtl8169_init_ring_indexes(st
 
 static void rtl_hw_jumbo_enable(struct rtl8169_private *tp)
 {
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	RTL_W8(Cfg9346, Cfg9346_Unlock);
 	rtl_generic_op(tp, tp->jumbo_ops.enable);
+	RTL_W8(Cfg9346, Cfg9346_Lock);
 }
 
 static void rtl_hw_jumbo_disable(struct rtl8169_private *tp)
 {
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	RTL_W8(Cfg9346, Cfg9346_Unlock);
 	rtl_generic_op(tp, tp->jumbo_ops.disable);
+	RTL_W8(Cfg9346, Cfg9346_Lock);
 }
 
 static void r8168c_hw_jumbo_enable(struct rtl8169_private *tp)

[ 23/41] tcp: dont fragment SACKed skbs in tcp_mark_head_lost()

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1906 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Neal Cardwell <ncardwell@google.com>

[ Upstream commit c0638c247f559e1a16ee79e54df14bca2cb679ea ]

In tcp_mark_head_lost() we should not attempt to fragment a SACKed skb
to mark the first portion as lost. This is for two primary reasons:

(1) tcp_shifted_skb() coalesces adjacent regions of SACKed skbs. When
doing this, it preserves the sum of their packet counts in order to
reflect the real-world dynamics on the wire. But given that skbs can
have remainders that do not align to MSS boundaries, this packet count
preservation means that for SACKed skbs there is not necessarily a
direct linear relationship between tcp_skb_pcount(skb) and
skb->len. Thus tcp_mark_head_lost()'s previous attempts to fragment
off and mark as lost a prefix of length (packets - oldcnt)*mss from
SACKed skbs were leading to occasional failures of the WARN_ON(len >
skb->len) in tcp_fragment() (which used to be a BUG_ON(); see the
recent "crash in tcp_fragment" thread on netdev).

(2) there is no real point in fragmenting off part of a SACKed skb and
calling tcp_skb_mark_lost() on it, since tcp_skb_mark_lost() is a NOP
for SACKed skbs.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Nandita Dukkipati <nanditad@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2571,6 +2571,7 @@ static void tcp_mark_head_lost(struct so
 
 		if (cnt > packets) {
 			if ((tcp_is_sack(tp) && !tcp_is_fack(tp)) ||
+			    (TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED) ||
 			    (oldcnt >= packets))
 				break;
 

[ 23/41] tcp: dont fragment SACKed skbs in tcp_mark_head_lost()

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1908 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Neal Cardwell <ncardwell@google.com>

[ Upstream commit c0638c247f559e1a16ee79e54df14bca2cb679ea ]

In tcp_mark_head_lost() we should not attempt to fragment a SACKed skb
to mark the first portion as lost. This is for two primary reasons:

(1) tcp_shifted_skb() coalesces adjacent regions of SACKed skbs. When
doing this, it preserves the sum of their packet counts in order to
reflect the real-world dynamics on the wire. But given that skbs can
have remainders that do not align to MSS boundaries, this packet count
preservation means that for SACKed skbs there is not necessarily a
direct linear relationship between tcp_skb_pcount(skb) and
skb->len. Thus tcp_mark_head_lost()'s previous attempts to fragment
off and mark as lost a prefix of length (packets - oldcnt)*mss from
SACKed skbs were leading to occasional failures of the WARN_ON(len >
skb->len) in tcp_fragment() (which used to be a BUG_ON(); see the
recent "crash in tcp_fragment" thread on netdev).

(2) there is no real point in fragmenting off part of a SACKed skb and
calling tcp_skb_mark_lost() on it, since tcp_skb_mark_lost() is a NOP
for SACKed skbs.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Ilpo J�rvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Nandita Dukkipati <nanditad@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2571,6 +2571,7 @@ static void tcp_mark_head_lost(struct so
 
 		if (cnt > packets) {
 			if ((tcp_is_sack(tp) && !tcp_is_fack(tp)) ||
+			    (TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED) ||
 			    (oldcnt >= packets))
 				break;
 

[ 24/41] bridge: check return value of ipv6_dev_get_saddr()

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Ulrich Weber <ulrich.weber@sophos.com>

[ Upstream commit d1d81d4c3dd886d5fa25a2c4fa1e39cb89613712 ]

otherwise source IPv6 address of ICMPV6_MGM_QUERY packet
might be random junk if IPv6 is disabled on interface or
link-local address is not yet ready (DAD).

Signed-off-by: Ulrich Weber <ulrich.weber@sophos.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_multicast.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -446,8 +446,11 @@ static struct sk_buff *br_ip6_multicast_
 	ip6h->nexthdr = IPPROTO_HOPOPTS;
 	ip6h->hop_limit = 1;
 	ipv6_addr_set(&ip6h->daddr, htonl(0xff020000), 0, 0, htonl(1));
-	ipv6_dev_get_saddr(dev_net(br->dev), br->dev, &ip6h->daddr, 0,
-			   &ip6h->saddr);
+	if (ipv6_dev_get_saddr(dev_net(br->dev), br->dev, &ip6h->daddr, 0,
+			       &ip6h->saddr)) {
+		kfree_skb(skb);
+		return NULL;
+	}
 	ipv6_eth_mc_map(&ip6h->daddr, eth->h_dest);
 
 	hopopt = (u8 *)(ip6h + 1);

[ 25/41] tcp: fix tcp_shift_skb_data() to not shift SACKed data below snd_una

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Neal Cardwell <ncardwell@google.com>

[ Upstream commit 4648dc97af9d496218a05353b0e442b3dfa6aaab ]

This commit fixes tcp_shift_skb_data() so that it does not shift
SACKed data below snd_una.

This fixes an issue whose symptoms exactly match reports showing
tp->sacked_out going negative since 3.3.0-rc4 (see "WARNING: at
net/ipv4/tcp_input.c:3418" thread on netdev).

Since 2008 (832d11c5cd076abc0aa1eaf7be96c81d1a59ce41)
tcp_shift_skb_data() had been shifting SACKed ranges that were below
snd_una. It checked that the *end* of the skb it was about to shift
from was above snd_una, but did not check that the end of the actual
shifted range was above snd_una; this commit adds that check.

Shifting SACKed ranges below snd_una is problematic because for such
ranges tcp_sacktag_one() short-circuits: it does not declare anything
as SACKed and does not increase sacked_out.

Before the fixes in commits cc9a672ee522d4805495b98680f4a3db5d0a0af9
and daef52bab1fd26e24e8e9578f8fb33ba1d0cb412, shifting SACKed ranges
below snd_una happened to work because tcp_shifted_skb() was always
(incorrectly) passing in to tcp_sacktag_one() an skb whose end_seq
tcp_shift_skb_data() had already guaranteed was beyond snd_una. Hence
tcp_sacktag_one() never short-circuited and always increased
tp->sacked_out in this case.

After those two fixes, my testing has verified that shifting SACKed
ranges below snd_una could cause tp->sacked_out to go negative with
the following sequence of events:

(1) tcp_shift_skb_data() sees an skb whose end_seq is beyond snd_una,
    then shifts a prefix of that skb that is below snd_una

(2) tcp_shifted_skb() increments the packet count of the
    already-SACKed prev sk_buff

(3) tcp_sacktag_one() sees the end of the new SACKed range is below
    snd_una, so it short-circuits and doesn't increase tp->sacked_out

(5) tcp_clean_rtx_queue() sees the SACKed skb has been ACKed,
    decrements tp->sacked_out by this "inflated" pcount that was
    missing a matching increase in tp->sacked_out, and hence
    tp->sacked_out underflows to a u32 like 0xFFFFFFFF, which casted
    to s32 is negative.

(6) this leads to the warnings seen in the recent "WARNING: at
    net/ipv4/tcp_input.c:3418" thread on the netdev list; e.g.:
    tcp_input.c:3418  WARN_ON((int)tp->sacked_out < 0);

More generally, I think this bug can be tickled in some cases where
two or more ACKs from the receiver are lost and then a DSACK arrives
that is immediately above an existing SACKed skb in the write queue.

This fix changes tcp_shift_skb_data() to abort this sequence at step
(1) in the scenario above by noticing that the bytes are below snd_una
and not shifting them.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1588,6 +1588,10 @@ static struct sk_buff *tcp_shift_skb_dat
 		}
 	}
 
+	/* tcp_sacktag_one() won't SACK-tag ranges below snd_una */
+	if (!after(TCP_SKB_CB(skb)->seq + len, tp->snd_una))
+		goto fallback;
+
 	if (!skb_shift(prev, skb, len))
 		goto fallback;
 	if (!tcp_shifted_skb(sk, skb, state, pcount, len, mss, dup_sack))

[ 26/41] IPv6: Fix not join all-router mcast group when forwarding set.

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Li Wei <lw@cn.fujitsu.com>

[ Upstream commit d6ddef9e641d1229d4ec841dc75ae703171c3e92 ]

When forwarding was set and a new net device is register,
we need add this device to the all-router mcast group.

Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/addrconf.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -434,6 +434,10 @@ static struct inet6_dev * ipv6_add_dev(s
 	/* Join all-node multicast group */
 	ipv6_dev_mc_inc(dev, &in6addr_linklocal_allnodes);
 
+	/* Join all-router multicast group if forwarding is set */
+	if (ndev->cnf.forwarding && dev && (dev->flags & IFF_MULTICAST))
+		ipv6_dev_mc_inc(dev, &in6addr_linklocal_allrouters);
+
 	return ndev;
 }
 

[ 27/41] usb: asix: Patch for Sitecom LN-031

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joerg Neikes <j.neikes@midlandgate.de>

commit 4e50391968849860dff1aacde358b4eb14aa5127 upstream.

This patch adds support for the Sitecom LN-031 USB adapter with a AX88178 chip.

Added USB id to find correct driver for AX88178 1000 Ethernet adapter.

Signed-off-by: Joerg Neikes <j.neikes@midlandgate.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/usb/asix.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -1595,6 +1595,10 @@ static const struct usb_device_id	produc
 	USB_DEVICE (0x6189, 0x182d),
 	.driver_info =  (unsigned long) &ax8817x_info,
 }, {
+	// Sitecom LN-031 "USB 2.0 10/100/1000 Ethernet adapter"
+	USB_DEVICE (0x0df6, 0x0056),
+	.driver_info =  (unsigned long) &ax88178_info,
+}, {
 	// corega FEther USB2-TX
 	USB_DEVICE (0x07aa, 0x0017),
 	.driver_info =  (unsigned long) &ax8817x_info,

[ 28/41] regulator: Fix setting selector in tps6524x set_voltage function

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Axel Lin <axel.lin@gmail.com>

commit f03570cf1709397ebe656608266b44ec772960c2 upstream.

Don't assign the voltage to selector.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/regulator/tps6524x-regulator.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/regulator/tps6524x-regulator.c
+++ b/drivers/regulator/tps6524x-regulator.c
@@ -481,7 +481,7 @@ static int set_voltage(struct regulator_
 	if (i >= info->n_voltages)
 		i = info->n_voltages - 1;
 
-	*selector = info->voltages[i];
+	*selector = i;
 
 	return write_field(hw, &info->voltage, i);
 }

[ 29/41] block: Fix NULL pointer dereference in sd_revalidate_disk

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>

commit fe316bf2d5847bc5dd975668671a7b1067603bc7 upstream.

Since 2.6.39 (1196f8b), when a driver returns -ENOMEDIUM for open(),
__blkdev_get() calls rescan_partitions() to remove
in-kernel partition structures and raise KOBJ_CHANGE uevent.

However it ends up calling driver's revalidate_disk without open
and could cause oops.

In the case of SCSI:

  process A                  process B
  ----------------------------------------------
  sys_open
    __blkdev_get
      sd_open
        returns -ENOMEDIUM
                             scsi_remove_device
                               <scsi_device torn down>
      rescan_partitions
        sd_revalidate_disk
          <oops>
Oopses are reported here:
http://marc.info/?l=linux-scsi&m=132388619710052

This patch separates the partition invalidation from rescan_partitions()
and use it for -ENOMEDIUM case.

Reported-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/block_dev.c        |   16 ++++++++++++----
 fs/partitions/check.c |   48 ++++++++++++++++++++++++++++++++++++++++--------
 include/linux/genhd.h |    1 +
 3 files changed, 53 insertions(+), 12 deletions(-)

--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1159,8 +1159,12 @@ static int __blkdev_get(struct block_dev
 			 * The latter is necessary to prevent ghost
 			 * partitions on a removed medium.
 			 */
-			if (bdev->bd_invalidated && (!ret || ret == -ENOMEDIUM))
-				rescan_partitions(disk, bdev);
+			if (bdev->bd_invalidated) {
+				if (!ret)
+					rescan_partitions(disk, bdev);
+				else if (ret == -ENOMEDIUM)
+					invalidate_partitions(disk, bdev);
+			}
 			if (ret)
 				goto out_clear;
 		} else {
@@ -1190,8 +1194,12 @@ static int __blkdev_get(struct block_dev
 			if (bdev->bd_disk->fops->open)
 				ret = bdev->bd_disk->fops->open(bdev, mode);
 			/* the same as first opener case, read comment there */
-			if (bdev->bd_invalidated && (!ret || ret == -ENOMEDIUM))
-				rescan_partitions(bdev->bd_disk, bdev);
+			if (bdev->bd_invalidated) {
+				if (!ret)
+					rescan_partitions(bdev->bd_disk, bdev);
+				else if (ret == -ENOMEDIUM)
+					invalidate_partitions(bdev->bd_disk, bdev);
+			}
 			if (ret)
 				goto out_unlock_bdev;
 		}
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -539,17 +539,11 @@ static bool disk_unlock_native_capacity(
 	}
 }
 
-int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
+static int drop_partitions(struct gendisk *disk, struct block_device *bdev)
 {
-	struct parsed_partitions *state = NULL;
 	struct disk_part_iter piter;
 	struct hd_struct *part;
-	int p, highest, res;
-rescan:
-	if (state && !IS_ERR(state)) {
-		kfree(state);
-		state = NULL;
-	}
+	int res;
 
 	if (bdev->bd_part_count)
 		return -EBUSY;
@@ -562,6 +556,24 @@ rescan:
 		delete_partition(disk, part->partno);
 	disk_part_iter_exit(&piter);
 
+	return 0;
+}
+
+int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
+{
+	struct parsed_partitions *state = NULL;
+	struct hd_struct *part;
+	int p, highest, res;
+rescan:
+	if (state && !IS_ERR(state)) {
+		kfree(state);
+		state = NULL;
+	}
+
+	res = drop_partitions(disk, bdev);
+	if (res)
+		return res;
+
 	if (disk->fops->revalidate_disk)
 		disk->fops->revalidate_disk(disk);
 	check_disk_size_change(disk, bdev);
@@ -665,6 +677,26 @@ rescan:
 	return 0;
 }
 
+int invalidate_partitions(struct gendisk *disk, struct block_device *bdev)
+{
+	int res;
+
+	if (!bdev->bd_invalidated)
+		return 0;
+
+	res = drop_partitions(disk, bdev);
+	if (res)
+		return res;
+
+	set_capacity(disk, 0);
+	check_disk_size_change(disk, bdev);
+	bdev->bd_invalidated = 0;
+	/* tell userspace that the media / partition table may have changed */
+	kobject_uevent(&disk_to_dev(disk)->kobj, KOBJ_CHANGE);
+
+	return 0;
+}
+
 unsigned char *read_dev_sector(struct block_device *bdev, sector_t n, Sector *p)
 {
 	struct address_space *mapping = bdev->bd_inode->i_mapping;
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -596,6 +596,7 @@ extern char *disk_name (struct gendisk *
 
 extern int disk_expand_part_tbl(struct gendisk *disk, int target);
 extern int rescan_partitions(struct gendisk *disk, struct block_device *bdev);
+extern int invalidate_partitions(struct gendisk *disk, struct block_device *bdev);
 extern struct hd_struct * __must_check add_partition(struct gendisk *disk,
 						     int partno, sector_t start,
 						     sector_t len, int flags,

[ 30/41] block, sx8: fix pointer math issue getting fw version

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit ea5f4db8ece896c2ab9eafa0924148a2596c52e4 upstream.

"mem" is type u8.  We need parenthesis here or it screws up the pointer
math probably leading to an oops.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/sx8.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/block/sx8.c
+++ b/drivers/block/sx8.c
@@ -1116,7 +1116,7 @@ static inline void carm_handle_resp(stru
 			break;
 		case MISC_GET_FW_VER: {
 			struct carm_fw_ver *ver = (struct carm_fw_ver *)
-				mem + sizeof(struct carm_msg_get_fw_ver);
+				(mem + sizeof(struct carm_msg_get_fw_ver));
 			if (!error) {
 				host->fw_ver = le32_to_cpu(ver->version);
 				host->flags |= (ver->features & FL_FW_VER_MASK);

[ 31/41] block: fix __blkdev_get and add_disk race condition

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislaw Gruszka <sgruszka@redhat.com>

commit 9f53d2fe815b4011ff930a7b6db98385d45faa68 upstream.

The following situation might occur:

__blkdev_get:			add_disk:

				register_disk()
get_gendisk()

disk_block_events()
	disk->ev == NULL

				disk_add_events()

__disk_unblock_events()
	disk->ev != NULL
	--ev->block

Then we unblock events, when they are suppose to be blocked. This can
trigger events related block/genhd.c warnings, but also can crash in
sd_check_events() or other places.

I'm able to reproduce crashes with the following scripts (with
connected usb dongle as sdb disk).

<snip>
DEV=/dev/sdb
ENABLE=/sys/bus/usb/devices/1-2/bConfigurationValue

function stop_me()
{
	for i in `jobs -p` ; do kill $i 2> /dev/null ; done
	exit
}

trap stop_me SIGHUP SIGINT SIGTERM

for ((i = 0; i < 10; i++)) ; do
	while true; do fdisk -l $DEV  2>&1 > /dev/null ; done &
done

while true ; do
echo 1 > $ENABLE
sleep 1
echo 0 > $ENABLE
done
</snip>

I use the script to verify patch fixing oops in sd_revalidate_disk
http://marc.info/?l=linux-scsi&m=132935572512352&w=2
Without Jun'ichi Nomura patch titled "Fix NULL pointer dereference in
sd_revalidate_disk" or this one, script easily crash kernel within
a few seconds. With both patches applied I do not observe crash.
Unfortunately after some time (dozen of minutes), script will hung in:

[ 1563.906432]  [<c08354f5>] schedule_timeout_uninterruptible+0x15/0x20
[ 1563.906437]  [<c04532d5>] msleep+0x15/0x20
[ 1563.906443]  [<c05d60b2>] blk_drain_queue+0x32/0xd0
[ 1563.906447]  [<c05d6e00>] blk_cleanup_queue+0xd0/0x170
[ 1563.906454]  [<c06d278f>] scsi_free_queue+0x3f/0x60
[ 1563.906459]  [<c06d7e6e>] __scsi_remove_device+0x6e/0xb0
[ 1563.906463]  [<c06d4aff>] scsi_forget_host+0x4f/0x60
[ 1563.906468]  [<c06cd84a>] scsi_remove_host+0x5a/0xf0
[ 1563.906482]  [<f7f030fb>] quiesce_and_remove_host+0x5b/0xa0 [usb_storage]
[ 1563.906490]  [<f7f03203>] usb_stor_disconnect+0x13/0x20 [usb_storage]

Anyway I think this patch is some step forward.

As drawback, I do not teardown on sysfs file create error, because I do
not know how to nullify disk->ev (since it can be used). However add_disk
error handling practically does not exist too, and things will work
without this sysfs file, except events will not be exported to user
space.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/genhd.c |   32 +++++++++++++++++++-------------
 1 file changed, 19 insertions(+), 13 deletions(-)

--- a/block/genhd.c
+++ b/block/genhd.c
@@ -36,6 +36,7 @@ static DEFINE_IDR(ext_devt_idr);
 
 static struct device_type disk_type;
 
+static void disk_alloc_events(struct gendisk *disk);
 static void disk_add_events(struct gendisk *disk);
 static void disk_del_events(struct gendisk *disk);
 static void disk_release_events(struct gendisk *disk);
@@ -602,6 +603,8 @@ void add_disk(struct gendisk *disk)
 	disk->major = MAJOR(devt);
 	disk->first_minor = MINOR(devt);
 
+	disk_alloc_events(disk);
+
 	/* Register BDI before referencing it from bdev */
 	bdi = &disk->queue->backing_dev_info;
 	bdi_register_dev(bdi, disk_devt(disk));
@@ -1734,9 +1737,9 @@ module_param_cb(events_dfl_poll_msecs, &
 		&disk_events_dfl_poll_msecs, 0644);
 
 /*
- * disk_{add|del|release}_events - initialize and destroy disk_events.
+ * disk_{alloc|add|del|release}_events - initialize and destroy disk_events.
  */
-static void disk_add_events(struct gendisk *disk)
+static void disk_alloc_events(struct gendisk *disk)
 {
 	struct disk_events *ev;
 
@@ -1749,16 +1752,6 @@ static void disk_add_events(struct gendi
 		return;
 	}
 
-	if (sysfs_create_files(&disk_to_dev(disk)->kobj,
-			       disk_events_attrs) < 0) {
-		pr_warn("%s: failed to create sysfs files for events\n",
-			disk->disk_name);
-		kfree(ev);
-		return;
-	}
-
-	disk->ev = ev;
-
 	INIT_LIST_HEAD(&ev->node);
 	ev->disk = disk;
 	spin_lock_init(&ev->lock);
@@ -1767,8 +1760,21 @@ static void disk_add_events(struct gendi
 	ev->poll_msecs = -1;
 	INIT_DELAYED_WORK(&ev->dwork, disk_events_workfn);
 
+	disk->ev = ev;
+}
+
+static void disk_add_events(struct gendisk *disk)
+{
+	if (!disk->ev)
+		return;
+
+	/* FIXME: error handling */
+	if (sysfs_create_files(&disk_to_dev(disk)->kobj, disk_events_attrs) < 0)
+		pr_warn("%s: failed to create sysfs files for events\n",
+			disk->disk_name);
+
 	mutex_lock(&disk_events_mutex);
-	list_add_tail(&ev->node, &disk_events);
+	list_add_tail(&disk->ev->node, &disk_events);
 	mutex_unlock(&disk_events_mutex);
 
 	/*

[ 32/41] Block: use a freezable workqueue for disk-event polling

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit 62d3c5439c534b0e6c653fc63e6d8c67be3a57b1 upstream.

This patch (as1519) fixes a bug in the block layer's disk-events
polling.  The polling is done by a work routine queued on the
system_nrt_wq workqueue.  Since that workqueue isn't freezable, the
polling continues even in the middle of a system sleep transition.

Obviously, polling a suspended drive for media changes and such isn't
a good thing to do; in the case of USB mass-storage devices it can
lead to real problems requiring device resets and even re-enumeration.

The patch fixes things by creating a new system-wide, non-reentrant,
freezable workqueue and using it for disk-events polling.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/genhd.c             |   10 +++++-----
 include/linux/workqueue.h |    4 ++++
 kernel/workqueue.c        |    7 ++++++-
 3 files changed, 15 insertions(+), 6 deletions(-)

--- a/block/genhd.c
+++ b/block/genhd.c
@@ -1479,9 +1479,9 @@ static void __disk_unblock_events(struct
 	intv = disk_events_poll_jiffies(disk);
 	set_timer_slack(&ev->dwork.timer, intv / 4);
 	if (check_now)
-		queue_delayed_work(system_nrt_wq, &ev->dwork, 0);
+		queue_delayed_work(system_nrt_freezable_wq, &ev->dwork, 0);
 	else if (intv)
-		queue_delayed_work(system_nrt_wq, &ev->dwork, intv);
+		queue_delayed_work(system_nrt_freezable_wq, &ev->dwork, intv);
 out_unlock:
 	spin_unlock_irqrestore(&ev->lock, flags);
 }
@@ -1525,7 +1525,7 @@ void disk_flush_events(struct gendisk *d
 	ev->clearing |= mask;
 	if (!ev->block) {
 		cancel_delayed_work(&ev->dwork);
-		queue_delayed_work(system_nrt_wq, &ev->dwork, 0);
+		queue_delayed_work(system_nrt_freezable_wq, &ev->dwork, 0);
 	}
 	spin_unlock_irq(&ev->lock);
 }
@@ -1562,7 +1562,7 @@ unsigned int disk_clear_events(struct ge
 
 	/* uncondtionally schedule event check and wait for it to finish */
 	disk_block_events(disk);
-	queue_delayed_work(system_nrt_wq, &ev->dwork, 0);
+	queue_delayed_work(system_nrt_freezable_wq, &ev->dwork, 0);
 	flush_delayed_work(&ev->dwork);
 	__disk_unblock_events(disk, false);
 
@@ -1599,7 +1599,7 @@ static void disk_events_workfn(struct wo
 
 	intv = disk_events_poll_jiffies(disk);
 	if (!ev->block && intv)
-		queue_delayed_work(system_nrt_wq, &ev->dwork, intv);
+		queue_delayed_work(system_nrt_freezable_wq, &ev->dwork, intv);
 
 	spin_unlock_irq(&ev->lock);
 
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -289,12 +289,16 @@ enum {
  *
  * system_freezable_wq is equivalent to system_wq except that it's
  * freezable.
+ *
+ * system_nrt_freezable_wq is equivalent to system_nrt_wq except that
+ * it's freezable.
  */
 extern struct workqueue_struct *system_wq;
 extern struct workqueue_struct *system_long_wq;
 extern struct workqueue_struct *system_nrt_wq;
 extern struct workqueue_struct *system_unbound_wq;
 extern struct workqueue_struct *system_freezable_wq;
+extern struct workqueue_struct *system_nrt_freezable_wq;
 
 extern struct workqueue_struct *
 __alloc_workqueue_key(const char *name, unsigned int flags, int max_active,
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -253,11 +253,13 @@ struct workqueue_struct *system_long_wq
 struct workqueue_struct *system_nrt_wq __read_mostly;
 struct workqueue_struct *system_unbound_wq __read_mostly;
 struct workqueue_struct *system_freezable_wq __read_mostly;
+struct workqueue_struct *system_nrt_freezable_wq __read_mostly;
 EXPORT_SYMBOL_GPL(system_wq);
 EXPORT_SYMBOL_GPL(system_long_wq);
 EXPORT_SYMBOL_GPL(system_nrt_wq);
 EXPORT_SYMBOL_GPL(system_unbound_wq);
 EXPORT_SYMBOL_GPL(system_freezable_wq);
+EXPORT_SYMBOL_GPL(system_nrt_freezable_wq);
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/workqueue.h>
@@ -3821,8 +3823,11 @@ static int __init init_workqueues(void)
 					    WQ_UNBOUND_MAX_ACTIVE);
 	system_freezable_wq = alloc_workqueue("events_freezable",
 					      WQ_FREEZABLE, 0);
+	system_nrt_freezable_wq = alloc_workqueue("events_nrt_freezable",
+			WQ_NON_REENTRANT | WQ_FREEZABLE, 0);
 	BUG_ON(!system_wq || !system_long_wq || !system_nrt_wq ||
-	       !system_unbound_wq || !system_freezable_wq);
+	       !system_unbound_wq || !system_freezable_wq ||
+		!system_nrt_freezable_wq);
 	return 0;
 }
 early_initcall(init_workqueues);

[ 33/41] sparc32: Add -Av8 to assembler command line.

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "David S. Miller" <davem@davemloft.net>

commit e0adb9902fb338a9fe634c3c2a3e474075c733ba upstream.

Newer version of binutils are more strict about specifying the
correct options to enable certain classes of instructions.

The sparc32 build is done for v7 in order to support sun4c systems
which lack hardware integer multiply and divide instructions.

So we have to pass -Av8 when building the assembler routines that
use these instructions and get patched into the kernel when we find
out that we have a v8 capable cpu.

Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/sparc/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -31,7 +31,7 @@ UTS_MACHINE    := sparc
 
 #KBUILD_CFLAGS += -g -pipe -fcall-used-g5 -fcall-used-g7
 KBUILD_CFLAGS += -m32 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7
-KBUILD_AFLAGS += -m32
+KBUILD_AFLAGS += -m32 -Wa,-Av8
 
 #LDFLAGS_vmlinux = -N -Ttext 0xf0004000
 #  Since 2.5.40, the first stage is left not btfix-ed.

[ 34/41] hwmon: (w83627ehf) Fix writing into fan_stop_time for NCT6775F/NCT6776F

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

commit 33fa9b620409edfc71aa6cf01a51f990fbe46ab8 upstream.

NCT6775F and NCT6776F have their own set of registers for FAN_STOP_TIME. The
correct registers were used to read FAN_STOP_TIME, but writes used the wrong
registers. Fix it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/w83627ehf.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -1607,7 +1607,7 @@ store_##reg(struct device *dev, struct d
 	val = step_time_to_reg(val, data->pwm_mode[nr]); \
 	mutex_lock(&data->update_lock); \
 	data->reg[nr] = val; \
-	w83627ehf_write_value(data, W83627EHF_REG_##REG[nr], val); \
+	w83627ehf_write_value(data, data->REG_##REG[nr], val); \
 	mutex_unlock(&data->update_lock); \
 	return count; \
 } \

[ 35/41] hwmon: (w83627ehf) Fix memory leak in probe function

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

commit 32260d94408c553dca4ce54104edf79941a27536 upstream.

The driver probe function leaked memory if creating the cpu0_vid attribute file
failed. Fix by converting the driver to use devm_kzalloc.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/w83627ehf.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -2004,7 +2004,8 @@ static int __devinit w83627ehf_probe(str
 		goto exit;
 	}
 
-	data = kzalloc(sizeof(struct w83627ehf_data), GFP_KERNEL);
+	data = devm_kzalloc(&pdev->dev, sizeof(struct w83627ehf_data),
+			    GFP_KERNEL);
 	if (!data) {
 		err = -ENOMEM;
 		goto exit_release;
@@ -2498,9 +2499,8 @@ static int __devinit w83627ehf_probe(str
 
 exit_remove:
 	w83627ehf_device_remove_files(dev);
-	kfree(data);
-	platform_set_drvdata(pdev, NULL);
 exit_release:
+	platform_set_drvdata(pdev, NULL);
 	release_region(res->start, IOREGION_LENGTH);
 exit:
 	return err;
@@ -2514,7 +2514,6 @@ static int __devexit w83627ehf_remove(st
 	w83627ehf_device_remove_files(&pdev->dev);
 	release_region(data->addr, IOREGION_LENGTH);
 	platform_set_drvdata(pdev, NULL);
-	kfree(data);
 
 	return 0;
 }

[ 36/41] hwmon: (w83627ehf) Fix temp2 source for W83627UHG

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jean Delvare <khali@linux-fr.org>

commit aacb6b0052692c72fe0cb94c6b547202def6ef46 upstream.

Properly set the source of temp2 for the W83627UHG. Also fix a
comment right before that, and document the W83627UHG as reporting up
to 3 temperatures.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/hwmon/w83627ehf |    2 +-
 drivers/hwmon/w83627ehf.c     |    8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -50,7 +50,7 @@ W83627DHG, W83627DHG-P, W83627UHG, W8366
 (NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively
 as Winbond chips.
 
-The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
+The chips implement 3 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
 2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID
 (except for 627UHG), alarms with beep warnings (control unimplemented),
 and some automatic fan regulation strategies (plus manual fan control mode).
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -39,7 +39,7 @@
 					       0x8860 0xa1
     w83627dhg    9      5       4       3      0xa020 0xc1    0x5ca3
     w83627dhg-p  9      5       4       3      0xb070 0xc1    0x5ca3
-    w83627uhg    8      2       2       2      0xa230 0xc1    0x5ca3
+    w83627uhg    8      2       2       3      0xa230 0xc1    0x5ca3
     w83667hg     9      5       3       3      0xa510 0xc1    0x5ca3
     w83667hg-b   9      5       3       4      0xb350 0xc1    0x5ca3
     nct6775f     9      4       3       9      0xb470 0xc1    0x5ca3
@@ -2158,16 +2158,16 @@ static int __devinit w83627ehf_probe(str
 		w83627ehf_set_temp_reg_ehf(data, 3);
 
 		/*
-		 * Temperature sources for temp1 and temp2 are selected with
+		 * Temperature sources for temp2 and temp3 are selected with
 		 * bank 0, registers 0x49 and 0x4a.
 		 */
 		data->temp_src[0] = 0;	/* SYSTIN */
 		reg = w83627ehf_read_value(data, 0x49) & 0x07;
 		/* Adjust to have the same mapping as other source registers */
 		if (reg == 0)
-			data->temp_src[1]++;
+			data->temp_src[1] = 1;
 		else if (reg >= 2 && reg <= 5)
-			data->temp_src[1] += 2;
+			data->temp_src[1] = reg + 2;
 		else	/* should never happen */
 			data->have_temp &= ~(1 << 1);
 		reg = w83627ehf_read_value(data, 0x4a);

[ 37/41] rapidio/tsi721: fix bug in register offset definitions

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Bounine <alexandre.bounine@idt.com>

commit 9bbad7da76b3dd578fb55c862624366a8c9ccd22 upstream.

Fix indexed register offset definitions that use decimal (wrong) instead
of hexadecimal (correct) notation for indexing multipliers.

Incorrect definitions do not affect Tsi721 driver in its current default
configuration because it uses only IDB queue 0.  Loss of inbound
doorbell functionality should be observed if queue other than 0 is used.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Chul Kim <chul.kim@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/rapidio/devices/tsi721.h |   30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

--- a/drivers/rapidio/devices/tsi721.h
+++ b/drivers/rapidio/devices/tsi721.h
@@ -118,34 +118,34 @@
 
 #define TSI721_IDB_ENTRY_SIZE	64
 
-#define TSI721_IDQ_CTL(x)	(0x20000 + (x) * 1000)
+#define TSI721_IDQ_CTL(x)	(0x20000 + (x) * 0x1000)
 #define TSI721_IDQ_SUSPEND	0x00000002
 #define TSI721_IDQ_INIT		0x00000001
 
-#define TSI721_IDQ_STS(x)	(0x20004 + (x) * 1000)
+#define TSI721_IDQ_STS(x)	(0x20004 + (x) * 0x1000)
 #define TSI721_IDQ_RUN		0x00200000
 
-#define TSI721_IDQ_MASK(x)	(0x20008 + (x) * 1000)
+#define TSI721_IDQ_MASK(x)	(0x20008 + (x) * 0x1000)
 #define TSI721_IDQ_MASK_MASK	0xffff0000
 #define TSI721_IDQ_MASK_PATT	0x0000ffff
 
-#define TSI721_IDQ_RP(x)	(0x2000c + (x) * 1000)
+#define TSI721_IDQ_RP(x)	(0x2000c + (x) * 0x1000)
 #define TSI721_IDQ_RP_PTR	0x0007ffff
 
-#define TSI721_IDQ_WP(x)	(0x20010 + (x) * 1000)
+#define TSI721_IDQ_WP(x)	(0x20010 + (x) * 0x1000)
 #define TSI721_IDQ_WP_PTR	0x0007ffff
 
-#define TSI721_IDQ_BASEL(x)	(0x20014 + (x) * 1000)
+#define TSI721_IDQ_BASEL(x)	(0x20014 + (x) * 0x1000)
 #define TSI721_IDQ_BASEL_ADDR	0xffffffc0
-#define TSI721_IDQ_BASEU(x)	(0x20018 + (x) * 1000)
-#define TSI721_IDQ_SIZE(x)	(0x2001c + (x) * 1000)
+#define TSI721_IDQ_BASEU(x)	(0x20018 + (x) * 0x1000)
+#define TSI721_IDQ_SIZE(x)	(0x2001c + (x) * 0x1000)
 #define TSI721_IDQ_SIZE_VAL(size)	(__fls(size) - 4)
 #define TSI721_IDQ_SIZE_MIN	512
 #define TSI721_IDQ_SIZE_MAX	(512 * 1024)
 
-#define TSI721_SR_CHINT(x)	(0x20040 + (x) * 1000)
-#define TSI721_SR_CHINTE(x)	(0x20044 + (x) * 1000)
-#define TSI721_SR_CHINTSET(x)	(0x20048 + (x) * 1000)
+#define TSI721_SR_CHINT(x)	(0x20040 + (x) * 0x1000)
+#define TSI721_SR_CHINTE(x)	(0x20044 + (x) * 0x1000)
+#define TSI721_SR_CHINTSET(x)	(0x20048 + (x) * 0x1000)
 #define TSI721_SR_CHINT_ODBOK	0x00000020
 #define TSI721_SR_CHINT_IDBQRCV	0x00000010
 #define TSI721_SR_CHINT_SUSP	0x00000008
@@ -156,7 +156,7 @@
 
 #define TSI721_IBWIN_NUM	8
 
-#define TSI721_IBWINLB(x)	(0x29000 + (x) * 20)
+#define TSI721_IBWINLB(x)	(0x29000 + (x) * 0x20)
 #define TSI721_IBWINLB_BA	0xfffff000
 #define TSI721_IBWINLB_WEN	0x00000001
 
@@ -187,13 +187,13 @@
  */
 #define TSI721_OBWIN_NUM	TSI721_PC2SR_WINS
 
-#define TSI721_OBWINLB(x)	(0x40000 + (x) * 20)
+#define TSI721_OBWINLB(x)	(0x40000 + (x) * 0x20)
 #define TSI721_OBWINLB_BA	0xffff8000
 #define TSI721_OBWINLB_WEN	0x00000001
 
-#define TSI721_OBWINUB(x)	(0x40004 + (x) * 20)
+#define TSI721_OBWINUB(x)	(0x40004 + (x) * 0x20)
 
-#define TSI721_OBWINSZ(x)	(0x40008 + (x) * 20)
+#define TSI721_OBWINSZ(x)	(0x40008 + (x) * 0x20)
 #define TSI721_OBWINSZ_SIZE	0x00001f00
 #define TSI721_OBWIN_SIZE(size)	(__fls(size) - 15)
 

[ 38/41] i2c-algo-bit: Fix spurious SCL timeouts under heavy load

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ville Syrjala <syrjala@sci.fi>

commit 8ee161ce5e0cfc689eb677f227a6248191165fac upstream.

When the system is under heavy load, there can be a significant delay
between the getscl() and time_after() calls inside sclhi(). That delay
may cause the time_after() check to trigger after SCL has gone high,
causing sclhi() to return -ETIMEDOUT.

To fix the problem, double check that SCL is still low after the
timeout has been reached, before deciding to return -ETIMEDOUT.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/i2c/algos/i2c-algo-bit.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -103,8 +103,14 @@ static int sclhi(struct i2c_algo_bit_dat
 		 * chips may hold it low ("clock stretching") while they
 		 * are processing data internally.
 		 */
-		if (time_after(jiffies, start + adap->timeout))
+		if (time_after(jiffies, start + adap->timeout)) {
+			/* Test one last time, as we may have been preempted
+			 * between last check and timeout test.
+			 */
+			if (getscl(adap))
+				break;
 			return -ETIMEDOUT;
+		}
 		cond_resched();
 	}
 #ifdef DEBUG

[ 39/41] iscsi-target: Fix reservation conflict -EBUSY response handling bug

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 00fdc6bbef77844ce397a7de7acfaf25e8e2e4eb upstream.

This patch addresses a iscsi-target specific bug related to reservation conflict
handling in iscsit_handle_scsi_cmd() that has been causing reservation conflicts
to complete and not fail as expected due to incorrect errno checking.  The problem
occured with the change to return -EBUSY from transport_generic_cmd_sequencer() ->
transport_generic_allocate_tasks() failures, that broke iscsit_handle_scsi_cmd()
checking for -EINVAL in order to invoke a non GOOD status response.

This was manifesting itself as data corruption with legacy SPC-2 reservations,
but also effects iscsi-target LUNs with SPC-3 persistent reservations.

This bug was originally introduced in lio-core commit:

commit 03e98c9eb916f3f0868c1dc344dde2a60287ff72
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date:   Fri Nov 4 02:36:16 2011 -0700

    target: Address legacy PYX_TRANSPORT_* return code breakage

Reported-by: Martin Svec <martin.svec@zoner.cz>
Cc: Martin Svec <martin.svec@zoner.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -1029,7 +1029,7 @@ done:
 		return iscsit_add_reject_from_cmd(
 				ISCSI_REASON_BOOKMARK_NO_RESOURCES,
 				1, 1, buf, cmd);
-	} else if (transport_ret == -EINVAL) {
+	} else if (transport_ret < 0) {
 		/*
 		 * Unsupported SAM Opcode.  CHECK_CONDITION will be sent
 		 * in iscsit_execute_cmd() during the CmdSN OOO Execution

[ 40/41] target: Fix compatible reservation handling (CRH=1) with legacy RESERVE/RELEASE

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 087a03b3ea1c8d6e2d5743a8d1c6d571058caa04 upstream.

This patch addresses a bug with target_check_scsi2_reservation_conflict()
return checking in target_scsi2_reservation_[reserve,release]() that was
preventing CRH=1 operation from silently succeeding in the two special
cases defined by SPC-3, and not failing with reservation conflict status
when dealing with legacy RESERVE/RELEASE + active SPC-3 PR logic.

Also explictly set cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT during
the early non reservation holder failure from pr_ops->t10_seq_non_holder()
check in transport_generic_cmd_sequencer() for fabrics that already expect
it to be set.

This bug was originally introduced in mainline commit:

commit eacac00ce5bfde8086cd0615fb53c986f7f970fe
Author: Christoph Hellwig <hch@infradead.org>
Date:   Thu Nov 3 17:50:40 2011 -0400

    target: split core_scsi2_emulate_crh

Reported-by: Martin Svec <martin.svec@zoner.cz>
Cc: Martin Svec <martin.svec@zoner.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_pr.c        |   34 +++++++++++++++++++++------------
 drivers/target/target_core_transport.c |    1 
 2 files changed, 23 insertions(+), 12 deletions(-)

--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -120,7 +120,7 @@ static struct t10_pr_registration *core_
 					struct se_node_acl *, struct se_session *);
 static void core_scsi3_put_pr_reg(struct t10_pr_registration *);
 
-static int target_check_scsi2_reservation_conflict(struct se_cmd *cmd, int *ret)
+static int target_check_scsi2_reservation_conflict(struct se_cmd *cmd)
 {
 	struct se_session *se_sess = cmd->se_sess;
 	struct se_subsystem_dev *su_dev = cmd->se_dev->se_sub_dev;
@@ -130,7 +130,7 @@ static int target_check_scsi2_reservatio
 	int conflict = 0;
 
 	if (!crh)
-		return false;
+		return -EINVAL;
 
 	pr_reg = core_scsi3_locate_pr_reg(cmd->se_dev, se_sess->se_node_acl,
 			se_sess);
@@ -158,16 +158,14 @@ static int target_check_scsi2_reservatio
 		 */
 		if (pr_reg->pr_res_holder) {
 			core_scsi3_put_pr_reg(pr_reg);
-			*ret = 0;
-			return false;
+			return 1;
 		}
 		if ((pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY) ||
 		    (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY) ||
 		    (pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) ||
 		    (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) {
 			core_scsi3_put_pr_reg(pr_reg);
-			*ret = 0;
-			return true;
+			return 1;
 		}
 		core_scsi3_put_pr_reg(pr_reg);
 		conflict = 1;
@@ -192,10 +190,10 @@ static int target_check_scsi2_reservatio
 			" while active SPC-3 registrations exist,"
 			" returning RESERVATION_CONFLICT\n");
 		cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT;
-		return true;
+		return -EBUSY;
 	}
 
-	return false;
+	return 0;
 }
 
 int target_scsi2_reservation_release(struct se_task *task)
@@ -204,12 +202,18 @@ int target_scsi2_reservation_release(str
 	struct se_device *dev = cmd->se_dev;
 	struct se_session *sess = cmd->se_sess;
 	struct se_portal_group *tpg = sess->se_tpg;
-	int ret = 0;
+	int ret = 0, rc;
 
 	if (!sess || !tpg)
 		goto out;
-	if (target_check_scsi2_reservation_conflict(cmd, &ret))
+	rc = target_check_scsi2_reservation_conflict(cmd);
+	if (rc == 1)
 		goto out;
+	else if (rc < 0) {
+		cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT;
+		ret = -EINVAL;
+		goto out;
+	}
 
 	ret = 0;
 	spin_lock(&dev->dev_reservation_lock);
@@ -246,7 +250,7 @@ int target_scsi2_reservation_reserve(str
 	struct se_device *dev = cmd->se_dev;
 	struct se_session *sess = cmd->se_sess;
 	struct se_portal_group *tpg = sess->se_tpg;
-	int ret = 0;
+	int ret = 0, rc;
 
 	if ((cmd->t_task_cdb[1] & 0x01) &&
 	    (cmd->t_task_cdb[1] & 0x02)) {
@@ -262,8 +266,14 @@ int target_scsi2_reservation_reserve(str
 	 */
 	if (!sess || !tpg)
 		goto out;
-	if (target_check_scsi2_reservation_conflict(cmd, &ret))
+	rc = target_check_scsi2_reservation_conflict(cmd);
+	if (rc == 1)
 		goto out;
+	else if (rc < 0) {
+		cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT;
+		ret = -EINVAL;
+		goto out;
+	}
 
 	ret = 0;
 	spin_lock(&dev->dev_reservation_lock);
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -2507,6 +2507,7 @@ static int transport_generic_cmd_sequenc
 					cmd, cdb, pr_reg_type) != 0) {
 			cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
 			cmd->se_cmd_flags |= SCF_SCSI_RESERVATION_CONFLICT;
+			cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT;
 			cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT;
 			return -EBUSY;
 		}

[ 41/41] hwmon: (zl6100) Enable interval between chip accesses for all chips

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <guenter.roeck@ericsson.com>

commit fecfb64422d91a9621a3f96ab75c3a5f13e80b58 upstream.

Intersil reports that all chips supported by the zl6100 driver require
an interval between chip accesses, even ZL2004 and ZL6105 which were thought
to be safe.

Reported-by: Vivek Gani <vgani@intersil.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/hwmon/zl6100   |   14 ++++++--------
 drivers/hwmon/pmbus/zl6100.c |   11 +++--------
 2 files changed, 9 insertions(+), 16 deletions(-)

--- a/Documentation/hwmon/zl6100
+++ b/Documentation/hwmon/zl6100
@@ -73,14 +73,12 @@ Module parameters
 delay
 -----
 
-Some Intersil/Zilker Labs DC-DC controllers require a minimum interval between
-I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though
-1 ms appears to be sufficient and has not caused any problems in testing.
-The problem is known to affect ZL6100, ZL2105, and ZL2008. It is known not to
-affect ZL2004 and ZL6105. The driver automatically sets the interval to 1 ms
-except for ZL2004 and ZL6105. To enable manual override, the driver provides a
-writeable module parameter, 'delay', which can be used to set the interval to
-a value between 0 and 65,535 microseconds.
+Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C
+bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms
+appears to be sufficient and has not caused any problems in testing. The problem
+is known to affect all currently supported chips. For manual override, the
+driver provides a writeable module parameter, 'delay', which can be used to set
+the interval to a value between 0 and 65,535 microseconds.
 
 
 Sysfs entries
--- a/drivers/hwmon/pmbus/zl6100.c
+++ b/drivers/hwmon/pmbus/zl6100.c
@@ -178,16 +178,11 @@ static int zl6100_probe(struct i2c_clien
 	data->id = mid->driver_data;
 
 	/*
-	 * ZL2008, ZL2105, and ZL6100 are known to require a wait time
-	 * between I2C accesses. ZL2004 and ZL6105 are known to be safe.
-	 *
-	 * Only clear the wait time for chips known to be safe. The wait time
-	 * can be cleared later for additional chips if tests show that it
-	 * is not needed (in other words, better be safe than sorry).
+	 * According to information from the chip vendor, all currently
+	 * supported chips are known to require a wait time between I2C
+	 * accesses.
 	 */
 	data->delay = delay;
-	if (data->id == zl2004 || data->id == zl6105)
-		data->delay = 0;
 
 	/*
 	 * Since there was a direct I2C device access above, wait before