From: Nikolaus Voss <n.voss@weinmann.de> To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org Cc: nicolas.ferre@atmel.com, ben-linux@fluff.org, balbi@ti.com, <h.feurstein@gmail.com>, <rmallon@gmail.com> Subject: [PATCH v9 4/4] G45 TWI: remove open drain setting for twi function gpios Date: Tue, 8 Nov 2011 12:11:03 +0100 [thread overview] Message-ID: <201203191534.q2JFYmKl012749@gatekeeper.vosshq.de> (raw) In-Reply-To: <cover.1322479017a.git.n.voss@weinmann.de> The G45 datasheets explicitly states that setting the open drain property on peripheral function gpios is not allowed. (How about other A91 chips?) Signed-off-by: Nikolaus Voss <n.voss@weinmann.de> --- arch/arm/mach-at91/at91sam9g45_devices.c | 6 ------ 1 files changed, 0 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 96e2adc..050e6e2 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -685,18 +685,12 @@ void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, in /* pins used for TWI interface */ if (i2c_id == 0) { at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PA20, 1); - at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PA21, 1); platform_device_register(&at91sam9g45_twi0_device); } else { at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PB10, 1); - at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PB11, 1); platform_device_register(&at91sam9g45_twi1_device); } -- 1.7.5.4
WARNING: multiple messages have this Message-ID (diff)
From: Nikolaus Voss <n.voss@weinmann.de> To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org Cc: nicolas.ferre@atmel.com, ben-linux@fluff.org, balbi@ti.com, h.feurstein@gmail.com, rmallon@gmail.com Subject: [PATCH v9 4/4] G45 TWI: remove open drain setting for twi function gpios Date: Tue, 8 Nov 2011 12:11:03 +0100 [thread overview] Message-ID: <201203191534.q2JFYmKl012749@gatekeeper.vosshq.de> (raw) In-Reply-To: <cover.1322479017a.git.n.voss@weinmann.de> The G45 datasheets explicitly states that setting the open drain property on peripheral function gpios is not allowed. (How about other A91 chips?) Signed-off-by: Nikolaus Voss <n.voss@weinmann.de> --- arch/arm/mach-at91/at91sam9g45_devices.c | 6 ------ 1 files changed, 0 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 96e2adc..050e6e2 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -685,18 +685,12 @@ void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, in /* pins used for TWI interface */ if (i2c_id == 0) { at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PA20, 1); - at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PA21, 1); platform_device_register(&at91sam9g45_twi0_device); } else { at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PB10, 1); - at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PB11, 1); platform_device_register(&at91sam9g45_twi1_device); } -- 1.7.5.4
next prev parent reply other threads:[~2012-03-19 15:47 UTC|newest] Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-03-19 15:07 [PATCH v9 0/4] AT91: replace broken TWI driver i2c-at91.c Nikolaus Voss 2012-03-19 15:07 ` Nikolaus Voss 2011-11-08 10:49 ` [PATCH v9 1/4] drivers/i2c/busses/i2c-at91.c: remove broken driver Nikolaus Voss 2011-11-08 10:49 ` Nikolaus Voss 2011-11-08 10:49 ` [PATCH v9 3/4] drivers/i2c/busses/i2c-at91.c: add new driver Nikolaus Voss 2011-11-08 10:49 ` Nikolaus Voss 2012-04-13 10:17 ` Hubert Feurstein 2012-04-13 10:17 ` Hubert Feurstein 2012-04-13 10:17 ` Hubert Feurstein 2012-04-13 10:39 ` Felipe Balbi 2012-04-13 10:39 ` Felipe Balbi 2012-04-13 10:39 ` Felipe Balbi 2012-04-13 11:44 ` [PATCH] i2c-at91: fix data-loss issue Hubert Feurstein 2012-04-13 11:44 ` Hubert Feurstein 2012-04-13 11:44 ` Hubert Feurstein 2012-04-13 22:06 ` Ryan Mallon 2012-04-13 22:06 ` Ryan Mallon 2012-04-13 22:06 ` Ryan Mallon 2012-04-16 7:30 ` Voss, Nikolaus 2012-04-16 7:30 ` Voss, Nikolaus 2012-04-16 7:30 ` Voss, Nikolaus 2012-04-16 9:27 ` Hubert Feurstein 2012-04-16 9:27 ` Hubert Feurstein 2012-04-16 9:27 ` Hubert Feurstein 2012-04-18 14:39 ` Wolfram Sang 2012-04-18 14:39 ` Wolfram Sang 2012-04-18 14:39 ` Wolfram Sang 2012-04-21 19:33 ` Adrian Yanes 2012-04-23 5:39 ` Voss, Nikolaus 2012-04-23 5:39 ` Voss, Nikolaus 2012-04-23 5:39 ` Voss, Nikolaus 2012-04-23 6:24 ` Adrian Yanes 2012-04-23 6:24 ` Adrian Yanes 2012-04-23 6:24 ` Adrian Yanes 2012-04-25 5:26 ` Adrian Yanes 2011-11-08 11:09 ` [PATCH v9 2/4] Replace clk_lookup.con_id with clk_lookup.dev_id entries for twi clk Nikolaus Voss 2011-11-08 11:09 ` Nikolaus Voss 2011-11-08 11:11 ` Nikolaus Voss [this message] 2011-11-08 11:11 ` [PATCH v9 4/4] G45 TWI: remove open drain setting for twi function gpios Nikolaus Voss
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=201203191534.q2JFYmKl012749@gatekeeper.vosshq.de \ --to=n.voss@weinmann.de \ --cc=balbi@ti.com \ --cc=ben-linux@fluff.org \ --cc=h.feurstein@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nicolas.ferre@atmel.com \ --cc=rmallon@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.