* [U-Boot] Please pull u-boot-ti/next
@ 2012-03-16 17:15 Tom Rini
2012-03-26 19:06 ` Tom Rini
0 siblings, 1 reply; 24+ messages in thread
From: Tom Rini @ 2012-03-16 17:15 UTC (permalink / raw)
To: u-boot
Hello,
The following changes since commit 5c91ee919c359e89fcb3230722253dbb9b4f7e32:
Ian Campbell (1):
ARM: dreamplug: Enable FDT support
are available in the git repository at:
git://git.denx.de/u-boot-ti next
Balaji T K (3):
arm: omap5: correct boot device mode7 for eMMC
omap5: pbias ldo9 turn on
mmc: omap5evm: Add eMMC saveenv support
Enric Balletb?? i Serra (1):
OMAP3: igep00x0: Reduce lines of code for IGEP-based boards.
Heiko Schocher (1):
ARM: davinci: fixes for cam_enc_4xx board
Jonathan Solnit (1):
ARM:OMAP+:MMC: Add parameters to MMC init
Nishanth Menon (3):
OMAP3+: Introduce generic logic for OMAP voltage controller
OMAP4460: TPS Ensure SET1 is selected after voltage configuration
OMAP4: scale voltage of core before MPU scales
SRICHARAN R (16):
OMAP5: clocks: Change clock settings as required for ES1.0 silicon.
OMAP5: board: Add pinmux data for omap5_evm board.
OMAP5: io: Configure the io settings for omap5430 sevm board.
OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.
OMAP5: palmas: Configure nominal opp vdd values
OMAP5: hwinit: Add the missing break statement
OMAP4/5: Make the silicon revision variable common.
OMAP5: SRAM: Change the SRAM base address.
OMAP4/5: Make the sysctrl structure common
OMAP4/5: device: Add support to get the device type.
OMAP5: defconfig: Align the defconfig for 5430 ES1.0
OMAP5: ddr: Change the ddr device name.
OMAP4/5: emif: Correct the emif power mgt shadow register bit fields.
power: twl6035: add palmas PMIC support
OMAP3+: reset: Create a common reset layer.
OMAP5: reset: Use cold reset in case of 5430ES1.0
arch/arm/cpu/armv7/am33xx/board.c | 2 +-
arch/arm/cpu/armv7/omap-common/Makefile | 1 +
arch/arm/cpu/armv7/omap-common/clocks-common.c | 99 ++---
arch/arm/cpu/armv7/omap-common/emif-common.c | 41 ++-
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 6 +-
.../arm/cpu/armv7/omap-common/{reset.S => reset.c} | 30 +-
arch/arm/cpu/armv7/omap-common/spl.c | 1 +
arch/arm/cpu/armv7/omap-common/spl_mmc.c | 5 +-
arch/arm/cpu/armv7/omap-common/vc.c | 138 ++++++
arch/arm/cpu/armv7/omap4/clocks.c | 77 ++-
arch/arm/cpu/armv7/omap4/hwinit.c | 24 +-
arch/arm/cpu/armv7/omap4/sdram_elpida.c | 4 +
arch/arm/cpu/armv7/omap5/Makefile | 2 +-
arch/arm/cpu/armv7/omap5/clocks.c | 143 ++++--
arch/arm/cpu/armv7/omap5/hwinit.c | 104 ++++-
.../cpu/armv7/omap5/{sdram_elpida.c => sdram.c} | 101 +++--
arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap3/cpu.h | 5 +-
arch/arm/include/asm/arch-omap3/mmc_host_def.h | 8 +-
arch/arm/include/asm/arch-omap4/clocks.h | 18 +-
arch/arm/include/asm/arch-omap4/cpu.h | 11 +
arch/arm/include/asm/arch-omap4/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap4/omap.h | 25 +-
arch/arm/include/asm/arch-omap4/sys_proto.h | 8 +-
arch/arm/include/asm/arch-omap5/clocks.h | 52 ++-
arch/arm/include/asm/arch-omap5/cpu.h | 11 +
arch/arm/include/asm/arch-omap5/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap5/mux_omap5.h | 502 ++++++++++----------
arch/arm/include/asm/arch-omap5/omap.h | 153 +++++--
arch/arm/include/asm/arch-omap5/sys_proto.h | 8 +-
arch/arm/include/asm/emif.h | 76 +++-
arch/arm/include/asm/omap_common.h | 11 +-
board/ait/cam_enc_4xx/cam_enc_4xx.c | 55 ++-
board/ait/cam_enc_4xx/config.mk | 7 +
board/ait/cam_enc_4xx/u-boot-spl.lds | 2 +-
board/cm_t35/cm_t35.c | 2 +-
board/comelit/dig297/dig297.c | 2 +-
board/corscience/tricorder/tricorder.c | 2 +-
board/htkw/mcx/mcx.c | 2 +-
board/isee/igep0020/igep0020.c | 4 +-
board/isee/igep0030/igep0030.c | 4 +-
board/logicpd/am3517evm/am3517evm.c | 2 +-
board/logicpd/omap3som/omap3logic.c | 2 +-
board/logicpd/zoom1/zoom1.c | 2 +-
board/logicpd/zoom2/zoom2.c | 2 +-
board/matrix_vision/mvblx/mvblx.c | 4 +-
board/overo/overo.c | 2 +-
board/pandora/pandora.c | 2 +-
board/technexion/twister/twister.c | 2 +-
board/teejet/mt_ventoux/mt_ventoux.c | 2 +-
board/ti/am3517crane/am3517crane.c | 2 +-
board/ti/beagle/beagle.c | 2 +-
board/ti/evm/evm.c | 2 +-
board/ti/omap5_evm/evm.c | 10 +-
board/ti/omap5_evm/mux_data.h | 489 ++++++++++---------
board/ti/panda/panda.c | 2 +-
board/ti/panda/panda_mux_data.h | 2 +-
board/ti/sdp3430/sdp.c | 2 +-
board/ti/sdp4430/sdp.c | 4 +-
board/ti/sdp4430/sdp4430_mux_data.h | 2 +-
board/timll/devkit8000/devkit8000.c | 2 +-
boards.cfg | 4 +-
drivers/mmc/omap_hsmmc.c | 61 +++-
drivers/power/Makefile | 1 +
drivers/power/twl6035.c | 65 +++
include/configs/cam_enc_4xx.h | 13 +-
include/configs/igep0030.h | 261 ----------
include/configs/{igep0020.h => igep00x0.h} | 15 +-
include/configs/omap5_evm.h | 25 +-
.../armv7/omap-common/reset.S => include/twl6035.h | 38 +-
70 files changed, 1612 insertions(+), 1162 deletions(-)
copy arch/arm/cpu/armv7/omap-common/{reset.S => reset.c} (70%)
create mode 100644 arch/arm/cpu/armv7/omap-common/vc.c
rename arch/arm/cpu/armv7/omap5/{sdram_elpida.c => sdram.c} (64%)
create mode 100644 drivers/power/twl6035.c
delete mode 100644 include/configs/igep0030.h
rename include/configs/{igep0020.h => igep00x0.h} (97%)
rename arch/arm/cpu/armv7/omap-common/reset.S => include/twl6035.h (53%)
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120316/a5869336/attachment.pgp>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
2012-03-16 17:15 [U-Boot] Please pull u-boot-ti/next Tom Rini
@ 2012-03-26 19:06 ` Tom Rini
2012-03-26 20:55 ` Tom Rini
0 siblings, 1 reply; 24+ messages in thread
From: Tom Rini @ 2012-03-26 19:06 UTC (permalink / raw)
To: u-boot
On Fri, Mar 16, 2012 at 10:15:28AM -0700, Tom Rini wrote:
> Hello,
>
> The following changes since commit 5c91ee919c359e89fcb3230722253dbb9b4f7e32:
> Ian Campbell (1):
> ARM: dreamplug: Enable FDT support
This has been updated as follows:
The following changes since commit 5c91ee919c359e89fcb3230722253dbb9b4f7e32:
Ian Campbell (1):
ARM: dreamplug: Enable FDT support
are available in the git repository at:
git://git.denx.de/u-boot-ti next
Aneesh V (6):
arm: adapt asm/linkage.h from Linux
armv7: add appropriate headers for assembly functions
ARM: enable Thumb build
armv7: Use -march=armv7-a and thereby enable Thumb-2
omap4+: Avoid using __attribute__ ((__packed__))
OMAP4: enable Thumb build
Balaji T K (3):
arm: omap5: correct boot device mode7 for eMMC
omap5: pbias ldo9 turn on
mmc: omap5evm: Add eMMC saveenv support
Enric Balletb?? i Serra (1):
OMAP3: igep00x0: Reduce lines of code for IGEP-based boards.
Grazvydas Ignotas (3):
OMAP3: pandora: pin mux updates for DM3730 board variant
OMAP3: pandora: revise GPIO configuration
OMAP3: pandora: drop console kernel argument
Heiko Schocher (1):
ARM: davinci: fixes for cam_enc_4xx board
Jonathan Solnit (1):
ARM:OMAP+:MMC: Add parameters to MMC init
Nishanth Menon (3):
OMAP3+: Introduce generic logic for OMAP voltage controller
OMAP4460: TPS Ensure SET1 is selected after voltage configuration
OMAP4: scale voltage of core before MPU scales
SRICHARAN R (16):
OMAP5: clocks: Change clock settings as required for ES1.0 silicon.
OMAP5: board: Add pinmux data for omap5_evm board.
OMAP5: io: Configure the io settings for omap5430 sevm board.
OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.
OMAP5: palmas: Configure nominal opp vdd values
OMAP5: hwinit: Add the missing break statement
OMAP4/5: Make the silicon revision variable common.
OMAP5: SRAM: Change the SRAM base address.
OMAP4/5: Make the sysctrl structure common
OMAP4/5: device: Add support to get the device type.
OMAP5: defconfig: Align the defconfig for 5430 ES1.0
OMAP5: ddr: Change the ddr device name.
OMAP4/5: emif: Correct the emif power mgt shadow register bit fields.
power: twl6035: add palmas PMIC support
OMAP3+: reset: Create a common reset layer.
OMAP5: reset: Use cold reset in case of 5430ES1.0
Tom Rini (2):
tools, config.mk: Add gcc-version.sh, cc-version test from Linux
Makefile: Add a 'checkthumb' rule
Makefile | 7 +
README | 8 +
arch/arm/config.mk | 27 +-
arch/arm/cpu/armv7/am33xx/board.c | 2 +-
arch/arm/cpu/armv7/config.mk | 7 +-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 5 +-
arch/arm/cpu/armv7/mx6/lowlevel_init.S | 5 +-
arch/arm/cpu/armv7/omap-common/Makefile | 1 +
arch/arm/cpu/armv7/omap-common/clocks-common.c | 99 ++---
arch/arm/cpu/armv7/omap-common/emif-common.c | 41 ++-
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 6 +-
arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 14 +-
.../arm/cpu/armv7/omap-common/{reset.S => reset.c} | 30 +-
arch/arm/cpu/armv7/omap-common/spl.c | 1 +
arch/arm/cpu/armv7/omap-common/spl_mmc.c | 5 +-
arch/arm/cpu/armv7/omap-common/vc.c | 138 ++++++
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 41 +-
arch/arm/cpu/armv7/omap4/clocks.c | 77 ++-
arch/arm/cpu/armv7/omap4/hwinit.c | 24 +-
arch/arm/cpu/armv7/omap4/sdram_elpida.c | 4 +
arch/arm/cpu/armv7/omap5/Makefile | 2 +-
arch/arm/cpu/armv7/omap5/clocks.c | 143 ++++--
arch/arm/cpu/armv7/omap5/hwinit.c | 104 ++++-
.../cpu/armv7/omap5/{sdram_elpida.c => sdram.c} | 101 +++--
arch/arm/cpu/armv7/s5pc1xx/cache.S | 10 +-
arch/arm/cpu/armv7/s5pc1xx/reset.S | 5 +-
arch/arm/cpu/armv7/start.S | 13 +-
arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 5 +-
arch/arm/cpu/armv7/u8500/lowlevel.S | 9 +-
arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap3/cpu.h | 5 +-
arch/arm/include/asm/arch-omap3/mmc_host_def.h | 8 +-
arch/arm/include/asm/arch-omap3/mux.h | 6 +
arch/arm/include/asm/arch-omap4/clocks.h | 18 +-
arch/arm/include/asm/arch-omap4/cpu.h | 11 +
arch/arm/include/asm/arch-omap4/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap4/mux_omap4.h | 2 +-
arch/arm/include/asm/arch-omap4/omap.h | 25 +-
arch/arm/include/asm/arch-omap4/sys_proto.h | 8 +-
arch/arm/include/asm/arch-omap5/clocks.h | 52 ++-
arch/arm/include/asm/arch-omap5/cpu.h | 11 +
arch/arm/include/asm/arch-omap5/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap5/mux_omap5.h | 504 ++++++++++----------
arch/arm/include/asm/arch-omap5/omap.h | 153 +++++--
arch/arm/include/asm/arch-omap5/sys_proto.h | 8 +-
arch/arm/include/asm/emif.h | 76 +++-
arch/arm/include/asm/linkage.h | 7 +
arch/arm/include/asm/omap_common.h | 11 +-
board/ait/cam_enc_4xx/cam_enc_4xx.c | 55 ++-
board/ait/cam_enc_4xx/config.mk | 7 +
board/ait/cam_enc_4xx/u-boot-spl.lds | 2 +-
board/cm_t35/cm_t35.c | 2 +-
board/comelit/dig297/dig297.c | 2 +-
board/corscience/tricorder/tricorder.c | 2 +-
board/htkw/mcx/mcx.c | 2 +-
board/isee/igep0020/igep0020.c | 4 +-
board/isee/igep0030/igep0030.c | 4 +-
board/logicpd/am3517evm/am3517evm.c | 2 +-
board/logicpd/omap3som/omap3logic.c | 2 +-
board/logicpd/zoom1/zoom1.c | 2 +-
board/logicpd/zoom2/zoom2.c | 2 +-
board/matrix_vision/mvblx/mvblx.c | 4 +-
board/overo/overo.c | 2 +-
board/pandora/pandora.c | 59 ++-
board/pandora/pandora.h | 6 +
board/technexion/twister/twister.c | 2 +-
board/teejet/mt_ventoux/mt_ventoux.c | 2 +-
board/ti/am3517crane/am3517crane.c | 2 +-
board/ti/beagle/beagle.c | 2 +-
board/ti/evm/evm.c | 2 +-
board/ti/omap5_evm/evm.c | 10 +-
board/ti/omap5_evm/mux_data.h | 489 ++++++++++---------
board/ti/panda/panda.c | 2 +-
board/ti/panda/panda_mux_data.h | 2 +-
board/ti/sdp3430/sdp.c | 2 +-
board/ti/sdp4430/sdp.c | 4 +-
board/ti/sdp4430/sdp4430_mux_data.h | 2 +-
board/timll/devkit8000/devkit8000.c | 2 +-
boards.cfg | 4 +-
config.mk | 6 +-
drivers/mmc/omap_hsmmc.c | 61 +++-
drivers/power/Makefile | 1 +
drivers/power/twl6035.c | 65 +++
include/configs/cam_enc_4xx.h | 13 +-
include/configs/igep0030.h | 261 ----------
include/configs/{igep0020.h => igep00x0.h} | 15 +-
include/configs/omap3_pandora.h | 3 +-
include/configs/omap4_common.h | 2 +
include/configs/omap5_evm.h | 25 +-
include/linux/linkage.h | 7 +-
.../armv7/omap-common/reset.S => include/twl6035.h | 38 +-
tools/gcc-version.sh | 32 ++
92 files changed, 1821 insertions(+), 1239 deletions(-)
copy arch/arm/cpu/armv7/omap-common/{reset.S => reset.c} (70%)
create mode 100644 arch/arm/cpu/armv7/omap-common/vc.c
rename arch/arm/cpu/armv7/omap5/{sdram_elpida.c => sdram.c} (64%)
create mode 100644 arch/arm/include/asm/linkage.h
create mode 100644 drivers/power/twl6035.c
delete mode 100644 include/configs/igep0030.h
rename include/configs/{igep0020.h => igep00x0.h} (97%)
rename arch/arm/cpu/armv7/omap-common/reset.S => include/twl6035.h (53%)
create mode 100755 tools/gcc-version.sh
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120326/c734ea55/attachment.pgp>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
2012-03-26 19:06 ` Tom Rini
@ 2012-03-26 20:55 ` Tom Rini
0 siblings, 0 replies; 24+ messages in thread
From: Tom Rini @ 2012-03-26 20:55 UTC (permalink / raw)
To: u-boot
On Mon, Mar 26, 2012 at 12:06:47PM -0700, Tom Rini wrote:
> On Fri, Mar 16, 2012 at 10:15:28AM -0700, Tom Rini wrote:
>
> > Hello,
> >
> > The following changes since commit 5c91ee919c359e89fcb3230722253dbb9b4f7e32:
> > Ian Campbell (1):
> > ARM: dreamplug: Enable FDT support
>
> This has been updated as follows:
>
> The following changes since commit 5c91ee919c359e89fcb3230722253dbb9b4f7e32:
> Ian Campbell (1):
> ARM: dreamplug: Enable FDT support
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-ti next
[snip]
With the updates to u-boot-arm/next, this needs a little manual merging
on the cam_enc_4xx changes. I've done this locally and can push if you
like.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120326/c27d6b13/attachment.pgp>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
2012-07-09 18:46 Tom Rini
@ 2012-07-09 20:39 ` Albert ARIBAUD
0 siblings, 0 replies; 24+ messages in thread
From: Albert ARIBAUD @ 2012-07-09 20:39 UTC (permalink / raw)
To: u-boot
Hi Tom,
On Mon, 9 Jul 2012 11:46:11 -0700, Tom Rini <trini@ti.com> wrote:
> Hello,
>
> The following changes since commit d702b0811df53a1fc2d8049e35431e4591d093c6:
>
> ARM: cache: Move the cp15 CR register read before flushing the cache. (2012-07-07 14:07:44 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-ti next
>
> for you to fetch changes up to 9af1a780c81639ca4b6f7035530dc8c7151bf201:
>
> omap: am335x_evm: enable i2c1 channel (2012-07-09 11:12:19 -0700)
>
> ----------------------------------------------------------------
> Igor Grinberg (1):
> arm: omap3: cm-t35: minor comment and printf change
>
> Ilya Yanok (1):
> omap24xx_i2c: add 2-byte address support
>
> Javier Martinez Canillas (2):
> igep00x0: default to OMAP-specific serial driver
> igep00x0: default mmcrootfstype to EXT4
>
> Lad, Prabhakar (7):
> da850/omap-l138: Add MMC support for DA850/OMAP-L138
> arm, davinci: perform check for initializing global data and serial init
> da850/omap-l138: Define SPI specific configs for SPL only when SPI is used
> da850/omap-l138: Add support to read u-boot image from MMC/SD
> da850/omap-l138: Fix NAND flash timings
> da850/omap-l138: Add support for NAND SPL
> da850/omap-l138: add support for direct NOR boot mode
>
> Peter Meerwald (4):
> beagle: add eeprom expansion board info for bct brettl4
> beagle: make get_expansion_id(), get_board_revision(), beagle_display_init() static
> beagle: fix termination of buddy env setting
> beagle: removed unused pr_debug #define
>
> Rajashekhara, Sudhakar (2):
> da850/omap-l138: modifications for Logic PD Rev.3 AM18xx EVM
> da850/omap-l138: Make MMC and NOR support mutually exclusive
>
> Stefano Babic (4):
> mcx: increased buffer for command line
> OMAP3: mcx: set pinmux for uart4
> OMAP3: mcx: updated default environment
> OMAP3: mcx: read hot-water-button after reset
>
> Steve Sakoman (3):
> omap: am335x_evm: remove unused definitions
> omap: am33xx: enable gpio support
> omap: am335x_evm: enable i2c1 channel
>
> Sughosh Ganu (1):
> hawkboard/omapl-138: Add support for generating ais image for hawkboard
>
> .gitignore | 3 +
> Makefile | 5 +-
> arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 11 ++
> arch/arm/cpu/arm926ejs/davinci/spl.c | 20 ++--
> arch/arm/cpu/armv7/am33xx/board.c | 10 ++
> arch/arm/cpu/armv7/am33xx/clock.c | 20 ++++
> arch/arm/cpu/armv7/omap-common/Makefile | 2 +-
> arch/arm/include/asm/arch-am33xx/cpu.h | 20 ++++
> arch/arm/include/asm/arch-am33xx/gpio.h | 29 +++++
> arch/arm/include/asm/arch-davinci/hardware.h | 1 +
> arch/arm/include/asm/arch-davinci/pinmux_defs.h | 3 +
> board/cm_t35/cm_t35.c | 4 +-
> board/davinci/da8xxevm/da850evm.c | 54 ++++++++--
> board/davinci/da8xxevm/hawkboard-ais-nand.cfg | 4 +
> board/htkw/mcx/mcx.c | 23 ++++
> board/htkw/mcx/mcx.h | 11 +-
> board/ti/am335x/evm.c | 6 +-
> board/ti/am335x/mux.c | 13 +++
> board/ti/beagle/beagle.c | 16 +--
> boards.cfg | 1 +
> drivers/i2c/omap24xx_i2c.c | 58 +++++-----
> drivers/mmc/Makefile | 4 +
> drivers/mmc/spl_mmc_load.c | 62 +++++++++++
> include/configs/am335x_evm.h | 2 +-
> include/configs/da850evm.h | 93 ++++++++++++++--
> include/configs/hawkboard.h | 1 +
> include/configs/igep00x0.h | 4 +-
> include/configs/mcx.h | 132 ++++++++++++++++-------
> include/configs/omap3_beagle.h | 2 +-
> include/mmc.h | 2 +
> 30 files changed, 502 insertions(+), 114 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-am33xx/gpio.h
> create mode 100644 board/davinci/da8xxevm/hawkboard-ais-nand.cfg
> create mode 100644 drivers/mmc/spl_mmc_load.c
>
> This includes the single patch I asked for in u-boot-ti/master as well
> as a number of other small clean-ups, bugfixes or enhancements that have
> been around for a bit, but did not meet the merge window and I don't
> want to forget them. If you want me to carry them in my own /next
> branch until -rc1 comes out, that's fine and this can just serve as
> notice to interested parties that yes, really, patches have been picked
> up.
Applied to u-boot-arm/next, to be moved to master after the 12.07 release.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
@ 2012-07-09 18:46 Tom Rini
2012-07-09 20:39 ` Albert ARIBAUD
0 siblings, 1 reply; 24+ messages in thread
From: Tom Rini @ 2012-07-09 18:46 UTC (permalink / raw)
To: u-boot
Hello,
The following changes since commit d702b0811df53a1fc2d8049e35431e4591d093c6:
ARM: cache: Move the cp15 CR register read before flushing the cache. (2012-07-07 14:07:44 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-ti next
for you to fetch changes up to 9af1a780c81639ca4b6f7035530dc8c7151bf201:
omap: am335x_evm: enable i2c1 channel (2012-07-09 11:12:19 -0700)
----------------------------------------------------------------
Igor Grinberg (1):
arm: omap3: cm-t35: minor comment and printf change
Ilya Yanok (1):
omap24xx_i2c: add 2-byte address support
Javier Martinez Canillas (2):
igep00x0: default to OMAP-specific serial driver
igep00x0: default mmcrootfstype to EXT4
Lad, Prabhakar (7):
da850/omap-l138: Add MMC support for DA850/OMAP-L138
arm, davinci: perform check for initializing global data and serial init
da850/omap-l138: Define SPI specific configs for SPL only when SPI is used
da850/omap-l138: Add support to read u-boot image from MMC/SD
da850/omap-l138: Fix NAND flash timings
da850/omap-l138: Add support for NAND SPL
da850/omap-l138: add support for direct NOR boot mode
Peter Meerwald (4):
beagle: add eeprom expansion board info for bct brettl4
beagle: make get_expansion_id(), get_board_revision(), beagle_display_init() static
beagle: fix termination of buddy env setting
beagle: removed unused pr_debug #define
Rajashekhara, Sudhakar (2):
da850/omap-l138: modifications for Logic PD Rev.3 AM18xx EVM
da850/omap-l138: Make MMC and NOR support mutually exclusive
Stefano Babic (4):
mcx: increased buffer for command line
OMAP3: mcx: set pinmux for uart4
OMAP3: mcx: updated default environment
OMAP3: mcx: read hot-water-button after reset
Steve Sakoman (3):
omap: am335x_evm: remove unused definitions
omap: am33xx: enable gpio support
omap: am335x_evm: enable i2c1 channel
Sughosh Ganu (1):
hawkboard/omapl-138: Add support for generating ais image for hawkboard
.gitignore | 3 +
Makefile | 5 +-
arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 11 ++
arch/arm/cpu/arm926ejs/davinci/spl.c | 20 ++--
arch/arm/cpu/armv7/am33xx/board.c | 10 ++
arch/arm/cpu/armv7/am33xx/clock.c | 20 ++++
arch/arm/cpu/armv7/omap-common/Makefile | 2 +-
arch/arm/include/asm/arch-am33xx/cpu.h | 20 ++++
arch/arm/include/asm/arch-am33xx/gpio.h | 29 +++++
arch/arm/include/asm/arch-davinci/hardware.h | 1 +
arch/arm/include/asm/arch-davinci/pinmux_defs.h | 3 +
board/cm_t35/cm_t35.c | 4 +-
board/davinci/da8xxevm/da850evm.c | 54 ++++++++--
board/davinci/da8xxevm/hawkboard-ais-nand.cfg | 4 +
board/htkw/mcx/mcx.c | 23 ++++
board/htkw/mcx/mcx.h | 11 +-
board/ti/am335x/evm.c | 6 +-
board/ti/am335x/mux.c | 13 +++
board/ti/beagle/beagle.c | 16 +--
boards.cfg | 1 +
drivers/i2c/omap24xx_i2c.c | 58 +++++-----
drivers/mmc/Makefile | 4 +
drivers/mmc/spl_mmc_load.c | 62 +++++++++++
include/configs/am335x_evm.h | 2 +-
include/configs/da850evm.h | 93 ++++++++++++++--
include/configs/hawkboard.h | 1 +
include/configs/igep00x0.h | 4 +-
include/configs/mcx.h | 132 ++++++++++++++++-------
include/configs/omap3_beagle.h | 2 +-
include/mmc.h | 2 +
30 files changed, 502 insertions(+), 114 deletions(-)
create mode 100644 arch/arm/include/asm/arch-am33xx/gpio.h
create mode 100644 board/davinci/da8xxevm/hawkboard-ais-nand.cfg
create mode 100644 drivers/mmc/spl_mmc_load.c
This includes the single patch I asked for in u-boot-ti/master as well
as a number of other small clean-ups, bugfixes or enhancements that have
been around for a bit, but did not meet the merge window and I don't
want to forget them. If you want me to carry them in my own /next
branch until -rc1 comes out, that's fine and this can just serve as
notice to interested parties that yes, really, patches have been picked
up.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120709/a6634cd8/attachment.pgp>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
2012-04-20 16:26 Tom Rini
@ 2012-04-20 17:11 ` Albert ARIBAUD
0 siblings, 0 replies; 24+ messages in thread
From: Albert ARIBAUD @ 2012-04-20 17:11 UTC (permalink / raw)
To: u-boot
Hi Tom,
Le 20/04/2012 18:26, Tom Rini a ?crit :
> Hello,
>
> The following changes since commit 0d32389f2c8cb967dde2d3f89abdbe5fab5b0788:
> David Purdy (1):
> kirkwood: add support for Cloud Engines Pogoplug E02
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-ti next
>
> Aneesh V (6):
> arm: adapt asm/linkage.h from Linux
> armv7: add appropriate headers for assembly functions
> ARM: enable Thumb build
> armv7: Use -march=armv7-a and thereby enable Thumb-2
> omap4+: Avoid using __attribute__ ((__packed__))
> OMAP4: enable Thumb build
>
> Balaji T K (3):
> arm: omap5: correct boot device mode7 for eMMC
> omap5: pbias ldo9 turn on
> mmc: omap5evm: Add eMMC saveenv support
>
> Enric Balletb? i Serra (1):
> OMAP3: igep00x0: Reduce lines of code for IGEP-based boards.
>
> Grazvydas Ignotas (3):
> OMAP3: pandora: pin mux updates for DM3730 board variant
> OMAP3: pandora: revise GPIO configuration
> OMAP3: pandora: drop console kernel argument
>
> Jonathan Solnit (1):
> ARM:OMAP+:MMC: Add parameters to MMC init
>
> Nishanth Menon (3):
> OMAP3+: Introduce generic logic for OMAP voltage controller
> OMAP4460: TPS Ensure SET1 is selected after voltage configuration
> OMAP4: scale voltage of core before MPU scales
>
> SRICHARAN R (16):
> OMAP5: clocks: Change clock settings as required for ES1.0 silicon.
> OMAP5: board: Add pinmux data for omap5_evm board.
> OMAP5: io: Configure the io settings for omap5430 sevm board.
> OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.
> OMAP5: palmas: Configure nominal opp vdd values
> OMAP5: hwinit: Add the missing break statement
> OMAP4/5: Make the silicon revision variable common.
> OMAP5: SRAM: Change the SRAM base address.
> OMAP4/5: Make the sysctrl structure common
> OMAP4/5: device: Add support to get the device type.
> OMAP5: defconfig: Align the defconfig for 5430 ES1.0
> OMAP5: ddr: Change the ddr device name.
> OMAP4/5: emif: Correct the emif power mgt shadow register bit fields.
> power: twl6035: add palmas PMIC support
> OMAP3+: reset: Create a common reset layer.
> OMAP5: reset: Use cold reset in case of 5430ES1.0
>
> Tom Rini (9):
> tools, config.mk: Add gcc-version.sh, cc-version test from Linux
> Makefile: Add a 'checkthumb' rule
> omap4: Remove CONFIG_SYS_MMC_SET_DEV
> omap4+: Remove CONFIG_ARCH_CPU_INIT
> omap5912osk: Remove empty misc_init_r
> omap730p2: Remove empty misc_init_r
> omap3: Introduce weak misc_init_r
> include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF
> include/configs: Remove CONFIG_SYS_64BIT_STRTOUL
>
> Makefile | 7 +
> README | 8 +
> arch/arm/config.mk | 27 +-
> arch/arm/cpu/armv7/am33xx/board.c | 2 +-
> arch/arm/cpu/armv7/config.mk | 7 +-
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 5 +-
> arch/arm/cpu/armv7/mx6/lowlevel_init.S | 5 +-
> arch/arm/cpu/armv7/omap-common/Makefile | 1 +
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 99 ++---
> arch/arm/cpu/armv7/omap-common/emif-common.c | 41 ++-
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 16 +-
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 14 +-
> .../arm/cpu/armv7/omap-common/{reset.S => reset.c} | 30 +-
> arch/arm/cpu/armv7/omap-common/spl.c | 1 +
> arch/arm/cpu/armv7/omap-common/spl_mmc.c | 5 +-
> arch/arm/cpu/armv7/omap-common/vc.c | 138 ++++++
> arch/arm/cpu/armv7/omap3/board.c | 12 +
> arch/arm/cpu/armv7/omap3/lowlevel_init.S | 41 +-
> arch/arm/cpu/armv7/omap4/clocks.c | 77 ++-
> arch/arm/cpu/armv7/omap4/hwinit.c | 24 +-
> arch/arm/cpu/armv7/omap4/sdram_elpida.c | 4 +
> arch/arm/cpu/armv7/omap5/Makefile | 2 +-
> arch/arm/cpu/armv7/omap5/clocks.c | 143 ++++--
> arch/arm/cpu/armv7/omap5/hwinit.c | 104 ++++-
> .../cpu/armv7/omap5/{sdram_elpida.c => sdram.c} | 101 +++--
> arch/arm/cpu/armv7/s5pc1xx/cache.S | 10 +-
> arch/arm/cpu/armv7/s5pc1xx/reset.S | 5 +-
> arch/arm/cpu/armv7/start.S | 13 +-
> arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 5 +-
> arch/arm/cpu/armv7/u8500/lowlevel.S | 9 +-
> arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 2 +-
> arch/arm/include/asm/arch-omap3/cpu.h | 5 +-
> arch/arm/include/asm/arch-omap3/mmc_host_def.h | 8 +-
> arch/arm/include/asm/arch-omap3/mux.h | 6 +
> arch/arm/include/asm/arch-omap4/clocks.h | 18 +-
> arch/arm/include/asm/arch-omap4/cpu.h | 11 +
> arch/arm/include/asm/arch-omap4/mmc_host_def.h | 2 +-
> arch/arm/include/asm/arch-omap4/mux_omap4.h | 2 +-
> arch/arm/include/asm/arch-omap4/omap.h | 25 +-
> arch/arm/include/asm/arch-omap4/sys_proto.h | 8 +-
> arch/arm/include/asm/arch-omap5/clocks.h | 52 ++-
> arch/arm/include/asm/arch-omap5/cpu.h | 11 +
> arch/arm/include/asm/arch-omap5/mmc_host_def.h | 2 +-
> arch/arm/include/asm/arch-omap5/mux_omap5.h | 504 ++++++++++----------
> arch/arm/include/asm/arch-omap5/omap.h | 153 +++++--
> arch/arm/include/asm/arch-omap5/sys_proto.h | 8 +-
> arch/arm/include/asm/emif.h | 76 +++-
> arch/arm/include/asm/linkage.h | 7 +
> arch/arm/include/asm/omap_common.h | 11 +-
> board/cm_t35/cm_t35.c | 13 +-
> board/comelit/dig297/dig297.c | 2 +-
> board/corscience/tricorder/tricorder.c | 2 +-
> board/htkw/mcx/mcx.c | 13 +-
> board/isee/igep0020/igep0020.c | 4 +-
> board/isee/igep0030/igep0030.c | 4 +-
> board/logicpd/am3517evm/am3517evm.c | 2 +-
> board/logicpd/omap3som/omap3logic.c | 13 +-
> board/logicpd/zoom1/zoom1.c | 2 +-
> board/logicpd/zoom2/zoom2.c | 2 +-
> board/matrix_vision/mvblx/mvblx.c | 4 +-
> board/overo/overo.c | 2 +-
> board/pandora/pandora.c | 59 ++-
> board/pandora/pandora.h | 6 +
> board/technexion/twister/twister.c | 2 +-
> board/teejet/mt_ventoux/mt_ventoux.c | 9 +-
> board/ti/am3517crane/am3517crane.c | 2 +-
> board/ti/beagle/beagle.c | 2 +-
> board/ti/evm/evm.c | 2 +-
> board/ti/omap5912osk/omap5912osk.c | 7 -
> board/ti/omap5_evm/evm.c | 10 +-
> board/ti/omap5_evm/mux_data.h | 489 ++++++++++---------
> board/ti/omap730p2/omap730p2.c | 6 -
> board/ti/panda/panda.c | 2 +-
> board/ti/panda/panda_mux_data.h | 2 +-
> board/ti/sdp3430/sdp.c | 2 +-
> board/ti/sdp4430/sdp.c | 4 +-
> board/ti/sdp4430/sdp4430_mux_data.h | 2 +-
> board/timll/devkit8000/devkit8000.c | 2 +-
> boards.cfg | 4 +-
> config.mk | 6 +-
> drivers/mmc/omap_hsmmc.c | 61 +++-
> drivers/power/Makefile | 1 +
> drivers/power/twl6035.c | 65 +++
> include/configs/P1023RDS.h | 3 -
> include/configs/P2020COME.h | 2 -
> include/configs/am3517_crane.h | 1 -
> include/configs/am3517_evm.h | 2 -
> include/configs/at91sam9263ek.h | 2 -
> include/configs/da830evm.h | 1 -
> include/configs/ea20.h | 1 -
> include/configs/eb_cpux9k2.h | 2 -
> include/configs/flea3.h | 2 -
> include/configs/hawkboard.h | 1 -
> include/configs/igep0030.h | 261 ----------
> include/configs/{igep0020.h => igep00x0.h} | 15 +-
> include/configs/imx27lite-common.h | 1 -
> include/configs/mcx.h | 2 -
> include/configs/meesc.h | 1 -
> include/configs/mv-common.h | 1 -
> include/configs/mx25pdk.h | 1 -
> include/configs/mx35pdk.h | 2 -
> include/configs/omap3_pandora.h | 3 +-
> include/configs/omap4_common.h | 4 +-
> include/configs/omap5912osk.h | 2 -
> include/configs/omap5_evm.h | 26 +-
> include/configs/omap730p2.h | 2 -
> include/configs/otc570.h | 1 -
> include/configs/p1_p2_rdb_pc.h | 3 -
> include/configs/spear-common.h | 1 -
> include/configs/tam3517-common.h | 1 -
> include/configs/tx25.h | 2 -
> include/configs/zmx25.h | 2 -
> include/linux/linkage.h | 7 +-
> .../armv7/omap-common/reset.S => include/twl6035.h | 38 +-
> tools/gcc-version.sh | 32 ++
> 115 files changed, 1779 insertions(+), 1321 deletions(-)
> copy arch/arm/cpu/armv7/omap-common/{reset.S => reset.c} (70%)
> create mode 100644 arch/arm/cpu/armv7/omap-common/vc.c
> rename arch/arm/cpu/armv7/omap5/{sdram_elpida.c => sdram.c} (64%)
> create mode 100644 arch/arm/include/asm/linkage.h
> create mode 100644 drivers/power/twl6035.c
> delete mode 100644 include/configs/igep0030.h
> rename include/configs/{igep0020.h => igep00x0.h} (97%)
> rename arch/arm/cpu/armv7/omap-common/reset.S => include/twl6035.h (53%)
> create mode 100755 tools/gcc-version.sh
Applied to u-boot-arm/next, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
@ 2012-04-20 16:26 Tom Rini
2012-04-20 17:11 ` Albert ARIBAUD
0 siblings, 1 reply; 24+ messages in thread
From: Tom Rini @ 2012-04-20 16:26 UTC (permalink / raw)
To: u-boot
Hello,
The following changes since commit 0d32389f2c8cb967dde2d3f89abdbe5fab5b0788:
David Purdy (1):
kirkwood: add support for Cloud Engines Pogoplug E02
are available in the git repository at:
git://git.denx.de/u-boot-ti next
Aneesh V (6):
arm: adapt asm/linkage.h from Linux
armv7: add appropriate headers for assembly functions
ARM: enable Thumb build
armv7: Use -march=armv7-a and thereby enable Thumb-2
omap4+: Avoid using __attribute__ ((__packed__))
OMAP4: enable Thumb build
Balaji T K (3):
arm: omap5: correct boot device mode7 for eMMC
omap5: pbias ldo9 turn on
mmc: omap5evm: Add eMMC saveenv support
Enric Balletb?? i Serra (1):
OMAP3: igep00x0: Reduce lines of code for IGEP-based boards.
Grazvydas Ignotas (3):
OMAP3: pandora: pin mux updates for DM3730 board variant
OMAP3: pandora: revise GPIO configuration
OMAP3: pandora: drop console kernel argument
Jonathan Solnit (1):
ARM:OMAP+:MMC: Add parameters to MMC init
Nishanth Menon (3):
OMAP3+: Introduce generic logic for OMAP voltage controller
OMAP4460: TPS Ensure SET1 is selected after voltage configuration
OMAP4: scale voltage of core before MPU scales
SRICHARAN R (16):
OMAP5: clocks: Change clock settings as required for ES1.0 silicon.
OMAP5: board: Add pinmux data for omap5_evm board.
OMAP5: io: Configure the io settings for omap5430 sevm board.
OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.
OMAP5: palmas: Configure nominal opp vdd values
OMAP5: hwinit: Add the missing break statement
OMAP4/5: Make the silicon revision variable common.
OMAP5: SRAM: Change the SRAM base address.
OMAP4/5: Make the sysctrl structure common
OMAP4/5: device: Add support to get the device type.
OMAP5: defconfig: Align the defconfig for 5430 ES1.0
OMAP5: ddr: Change the ddr device name.
OMAP4/5: emif: Correct the emif power mgt shadow register bit fields.
power: twl6035: add palmas PMIC support
OMAP3+: reset: Create a common reset layer.
OMAP5: reset: Use cold reset in case of 5430ES1.0
Tom Rini (9):
tools, config.mk: Add gcc-version.sh, cc-version test from Linux
Makefile: Add a 'checkthumb' rule
omap4: Remove CONFIG_SYS_MMC_SET_DEV
omap4+: Remove CONFIG_ARCH_CPU_INIT
omap5912osk: Remove empty misc_init_r
omap730p2: Remove empty misc_init_r
omap3: Introduce weak misc_init_r
include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF
include/configs: Remove CONFIG_SYS_64BIT_STRTOUL
Makefile | 7 +
README | 8 +
arch/arm/config.mk | 27 +-
arch/arm/cpu/armv7/am33xx/board.c | 2 +-
arch/arm/cpu/armv7/config.mk | 7 +-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 5 +-
arch/arm/cpu/armv7/mx6/lowlevel_init.S | 5 +-
arch/arm/cpu/armv7/omap-common/Makefile | 1 +
arch/arm/cpu/armv7/omap-common/clocks-common.c | 99 ++---
arch/arm/cpu/armv7/omap-common/emif-common.c | 41 ++-
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 16 +-
arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 14 +-
.../arm/cpu/armv7/omap-common/{reset.S => reset.c} | 30 +-
arch/arm/cpu/armv7/omap-common/spl.c | 1 +
arch/arm/cpu/armv7/omap-common/spl_mmc.c | 5 +-
arch/arm/cpu/armv7/omap-common/vc.c | 138 ++++++
arch/arm/cpu/armv7/omap3/board.c | 12 +
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 41 +-
arch/arm/cpu/armv7/omap4/clocks.c | 77 ++-
arch/arm/cpu/armv7/omap4/hwinit.c | 24 +-
arch/arm/cpu/armv7/omap4/sdram_elpida.c | 4 +
arch/arm/cpu/armv7/omap5/Makefile | 2 +-
arch/arm/cpu/armv7/omap5/clocks.c | 143 ++++--
arch/arm/cpu/armv7/omap5/hwinit.c | 104 ++++-
.../cpu/armv7/omap5/{sdram_elpida.c => sdram.c} | 101 +++--
arch/arm/cpu/armv7/s5pc1xx/cache.S | 10 +-
arch/arm/cpu/armv7/s5pc1xx/reset.S | 5 +-
arch/arm/cpu/armv7/start.S | 13 +-
arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 5 +-
arch/arm/cpu/armv7/u8500/lowlevel.S | 9 +-
arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap3/cpu.h | 5 +-
arch/arm/include/asm/arch-omap3/mmc_host_def.h | 8 +-
arch/arm/include/asm/arch-omap3/mux.h | 6 +
arch/arm/include/asm/arch-omap4/clocks.h | 18 +-
arch/arm/include/asm/arch-omap4/cpu.h | 11 +
arch/arm/include/asm/arch-omap4/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap4/mux_omap4.h | 2 +-
arch/arm/include/asm/arch-omap4/omap.h | 25 +-
arch/arm/include/asm/arch-omap4/sys_proto.h | 8 +-
arch/arm/include/asm/arch-omap5/clocks.h | 52 ++-
arch/arm/include/asm/arch-omap5/cpu.h | 11 +
arch/arm/include/asm/arch-omap5/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap5/mux_omap5.h | 504 ++++++++++----------
arch/arm/include/asm/arch-omap5/omap.h | 153 +++++--
arch/arm/include/asm/arch-omap5/sys_proto.h | 8 +-
arch/arm/include/asm/emif.h | 76 +++-
arch/arm/include/asm/linkage.h | 7 +
arch/arm/include/asm/omap_common.h | 11 +-
board/cm_t35/cm_t35.c | 13 +-
board/comelit/dig297/dig297.c | 2 +-
board/corscience/tricorder/tricorder.c | 2 +-
board/htkw/mcx/mcx.c | 13 +-
board/isee/igep0020/igep0020.c | 4 +-
board/isee/igep0030/igep0030.c | 4 +-
board/logicpd/am3517evm/am3517evm.c | 2 +-
board/logicpd/omap3som/omap3logic.c | 13 +-
board/logicpd/zoom1/zoom1.c | 2 +-
board/logicpd/zoom2/zoom2.c | 2 +-
board/matrix_vision/mvblx/mvblx.c | 4 +-
board/overo/overo.c | 2 +-
board/pandora/pandora.c | 59 ++-
board/pandora/pandora.h | 6 +
board/technexion/twister/twister.c | 2 +-
board/teejet/mt_ventoux/mt_ventoux.c | 9 +-
board/ti/am3517crane/am3517crane.c | 2 +-
board/ti/beagle/beagle.c | 2 +-
board/ti/evm/evm.c | 2 +-
board/ti/omap5912osk/omap5912osk.c | 7 -
board/ti/omap5_evm/evm.c | 10 +-
board/ti/omap5_evm/mux_data.h | 489 ++++++++++---------
board/ti/omap730p2/omap730p2.c | 6 -
board/ti/panda/panda.c | 2 +-
board/ti/panda/panda_mux_data.h | 2 +-
board/ti/sdp3430/sdp.c | 2 +-
board/ti/sdp4430/sdp.c | 4 +-
board/ti/sdp4430/sdp4430_mux_data.h | 2 +-
board/timll/devkit8000/devkit8000.c | 2 +-
boards.cfg | 4 +-
config.mk | 6 +-
drivers/mmc/omap_hsmmc.c | 61 +++-
drivers/power/Makefile | 1 +
drivers/power/twl6035.c | 65 +++
include/configs/P1023RDS.h | 3 -
include/configs/P2020COME.h | 2 -
include/configs/am3517_crane.h | 1 -
include/configs/am3517_evm.h | 2 -
include/configs/at91sam9263ek.h | 2 -
include/configs/da830evm.h | 1 -
include/configs/ea20.h | 1 -
include/configs/eb_cpux9k2.h | 2 -
include/configs/flea3.h | 2 -
include/configs/hawkboard.h | 1 -
include/configs/igep0030.h | 261 ----------
include/configs/{igep0020.h => igep00x0.h} | 15 +-
include/configs/imx27lite-common.h | 1 -
include/configs/mcx.h | 2 -
include/configs/meesc.h | 1 -
include/configs/mv-common.h | 1 -
include/configs/mx25pdk.h | 1 -
include/configs/mx35pdk.h | 2 -
include/configs/omap3_pandora.h | 3 +-
include/configs/omap4_common.h | 4 +-
include/configs/omap5912osk.h | 2 -
include/configs/omap5_evm.h | 26 +-
include/configs/omap730p2.h | 2 -
include/configs/otc570.h | 1 -
include/configs/p1_p2_rdb_pc.h | 3 -
include/configs/spear-common.h | 1 -
include/configs/tam3517-common.h | 1 -
include/configs/tx25.h | 2 -
include/configs/zmx25.h | 2 -
include/linux/linkage.h | 7 +-
.../armv7/omap-common/reset.S => include/twl6035.h | 38 +-
tools/gcc-version.sh | 32 ++
115 files changed, 1779 insertions(+), 1321 deletions(-)
copy arch/arm/cpu/armv7/omap-common/{reset.S => reset.c} (70%)
create mode 100644 arch/arm/cpu/armv7/omap-common/vc.c
rename arch/arm/cpu/armv7/omap5/{sdram_elpida.c => sdram.c} (64%)
create mode 100644 arch/arm/include/asm/linkage.h
create mode 100644 drivers/power/twl6035.c
delete mode 100644 include/configs/igep0030.h
rename include/configs/{igep0020.h => igep00x0.h} (97%)
rename arch/arm/cpu/armv7/omap-common/reset.S => include/twl6035.h (53%)
create mode 100755 tools/gcc-version.sh
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120420/4f115a5d/attachment.pgp>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
@ 2012-04-02 16:49 Tom Rini
0 siblings, 0 replies; 24+ messages in thread
From: Tom Rini @ 2012-04-02 16:49 UTC (permalink / raw)
To: u-boot
Hello,
The following changes since commit 37ee186fde3c48f90121a76e5039efe534a273f3:
Ian Campbell (1):
ARM: dreamplug: Enable FDT support
are available in the git repository at:
git://git.denx.de/u-boot-ti next
Aneesh V (6):
arm: adapt asm/linkage.h from Linux
armv7: add appropriate headers for assembly functions
ARM: enable Thumb build
armv7: Use -march=armv7-a and thereby enable Thumb-2
omap4+: Avoid using __attribute__ ((__packed__))
OMAP4: enable Thumb build
Balaji T K (3):
arm: omap5: correct boot device mode7 for eMMC
omap5: pbias ldo9 turn on
mmc: omap5evm: Add eMMC saveenv support
Enric Balletb?? i Serra (1):
OMAP3: igep00x0: Reduce lines of code for IGEP-based boards.
Grazvydas Ignotas (3):
OMAP3: pandora: pin mux updates for DM3730 board variant
OMAP3: pandora: revise GPIO configuration
OMAP3: pandora: drop console kernel argument
Jonathan Solnit (1):
ARM:OMAP+:MMC: Add parameters to MMC init
Nishanth Menon (3):
OMAP3+: Introduce generic logic for OMAP voltage controller
OMAP4460: TPS Ensure SET1 is selected after voltage configuration
OMAP4: scale voltage of core before MPU scales
SRICHARAN R (16):
OMAP5: clocks: Change clock settings as required for ES1.0 silicon.
OMAP5: board: Add pinmux data for omap5_evm board.
OMAP5: io: Configure the io settings for omap5430 sevm board.
OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.
OMAP5: palmas: Configure nominal opp vdd values
OMAP5: hwinit: Add the missing break statement
OMAP4/5: Make the silicon revision variable common.
OMAP5: SRAM: Change the SRAM base address.
OMAP4/5: Make the sysctrl structure common
OMAP4/5: device: Add support to get the device type.
OMAP5: defconfig: Align the defconfig for 5430 ES1.0
OMAP5: ddr: Change the ddr device name.
OMAP4/5: emif: Correct the emif power mgt shadow register bit fields.
power: twl6035: add palmas PMIC support
OMAP3+: reset: Create a common reset layer.
OMAP5: reset: Use cold reset in case of 5430ES1.0
Tom Rini (2):
tools, config.mk: Add gcc-version.sh, cc-version test from Linux
Makefile: Add a 'checkthumb' rule
Makefile | 7 +
README | 8 +
arch/arm/config.mk | 27 +-
arch/arm/cpu/armv7/am33xx/board.c | 2 +-
arch/arm/cpu/armv7/config.mk | 7 +-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 5 +-
arch/arm/cpu/armv7/mx6/lowlevel_init.S | 5 +-
arch/arm/cpu/armv7/omap-common/Makefile | 1 +
arch/arm/cpu/armv7/omap-common/clocks-common.c | 99 ++---
arch/arm/cpu/armv7/omap-common/emif-common.c | 41 ++-
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 6 +-
arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 14 +-
.../arm/cpu/armv7/omap-common/{reset.S => reset.c} | 30 +-
arch/arm/cpu/armv7/omap-common/spl.c | 1 +
arch/arm/cpu/armv7/omap-common/spl_mmc.c | 5 +-
arch/arm/cpu/armv7/omap-common/vc.c | 138 ++++++
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 41 +-
arch/arm/cpu/armv7/omap4/clocks.c | 77 ++-
arch/arm/cpu/armv7/omap4/hwinit.c | 24 +-
arch/arm/cpu/armv7/omap4/sdram_elpida.c | 4 +
arch/arm/cpu/armv7/omap5/Makefile | 2 +-
arch/arm/cpu/armv7/omap5/clocks.c | 143 ++++--
arch/arm/cpu/armv7/omap5/hwinit.c | 104 ++++-
.../cpu/armv7/omap5/{sdram_elpida.c => sdram.c} | 101 +++--
arch/arm/cpu/armv7/s5pc1xx/cache.S | 10 +-
arch/arm/cpu/armv7/s5pc1xx/reset.S | 5 +-
arch/arm/cpu/armv7/start.S | 13 +-
arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 5 +-
arch/arm/cpu/armv7/u8500/lowlevel.S | 9 +-
arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap3/cpu.h | 5 +-
arch/arm/include/asm/arch-omap3/mmc_host_def.h | 8 +-
arch/arm/include/asm/arch-omap3/mux.h | 6 +
arch/arm/include/asm/arch-omap4/clocks.h | 18 +-
arch/arm/include/asm/arch-omap4/cpu.h | 11 +
arch/arm/include/asm/arch-omap4/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap4/mux_omap4.h | 2 +-
arch/arm/include/asm/arch-omap4/omap.h | 25 +-
arch/arm/include/asm/arch-omap4/sys_proto.h | 8 +-
arch/arm/include/asm/arch-omap5/clocks.h | 52 ++-
arch/arm/include/asm/arch-omap5/cpu.h | 11 +
arch/arm/include/asm/arch-omap5/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap5/mux_omap5.h | 504 ++++++++++----------
arch/arm/include/asm/arch-omap5/omap.h | 153 +++++--
arch/arm/include/asm/arch-omap5/sys_proto.h | 8 +-
arch/arm/include/asm/emif.h | 76 +++-
arch/arm/include/asm/linkage.h | 7 +
arch/arm/include/asm/omap_common.h | 11 +-
board/cm_t35/cm_t35.c | 2 +-
board/comelit/dig297/dig297.c | 2 +-
board/corscience/tricorder/tricorder.c | 2 +-
board/htkw/mcx/mcx.c | 2 +-
board/isee/igep0020/igep0020.c | 4 +-
board/isee/igep0030/igep0030.c | 4 +-
board/logicpd/am3517evm/am3517evm.c | 2 +-
board/logicpd/omap3som/omap3logic.c | 2 +-
board/logicpd/zoom1/zoom1.c | 2 +-
board/logicpd/zoom2/zoom2.c | 2 +-
board/matrix_vision/mvblx/mvblx.c | 4 +-
board/overo/overo.c | 2 +-
board/pandora/pandora.c | 59 ++-
board/pandora/pandora.h | 6 +
board/technexion/twister/twister.c | 2 +-
board/teejet/mt_ventoux/mt_ventoux.c | 2 +-
board/ti/am3517crane/am3517crane.c | 2 +-
board/ti/beagle/beagle.c | 2 +-
board/ti/evm/evm.c | 2 +-
board/ti/omap5_evm/evm.c | 10 +-
board/ti/omap5_evm/mux_data.h | 489 ++++++++++---------
board/ti/panda/panda.c | 2 +-
board/ti/panda/panda_mux_data.h | 2 +-
board/ti/sdp3430/sdp.c | 2 +-
board/ti/sdp4430/sdp.c | 4 +-
board/ti/sdp4430/sdp4430_mux_data.h | 2 +-
board/timll/devkit8000/devkit8000.c | 2 +-
boards.cfg | 4 +-
config.mk | 6 +-
drivers/mmc/omap_hsmmc.c | 61 +++-
drivers/power/Makefile | 1 +
drivers/power/twl6035.c | 65 +++
include/configs/igep0030.h | 261 ----------
include/configs/{igep0020.h => igep00x0.h} | 15 +-
include/configs/omap3_pandora.h | 3 +-
include/configs/omap4_common.h | 2 +
include/configs/omap5_evm.h | 25 +-
include/linux/linkage.h | 7 +-
.../armv7/omap-common/reset.S => include/twl6035.h | 38 +-
tools/gcc-version.sh | 32 ++
88 files changed, 1767 insertions(+), 1216 deletions(-)
copy arch/arm/cpu/armv7/omap-common/{reset.S => reset.c} (70%)
create mode 100644 arch/arm/cpu/armv7/omap-common/vc.c
rename arch/arm/cpu/armv7/omap5/{sdram_elpida.c => sdram.c} (64%)
create mode 100644 arch/arm/include/asm/linkage.h
create mode 100644 drivers/power/twl6035.c
delete mode 100644 include/configs/igep0030.h
rename include/configs/{igep0020.h => igep00x0.h} (97%)
rename arch/arm/cpu/armv7/omap-common/reset.S => include/twl6035.h (53%)
create mode 100755 tools/gcc-version.sh
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120402/efd7533a/attachment.pgp>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
2011-12-19 21:20 Tom Rini
@ 2011-12-19 22:02 ` Albert ARIBAUD
0 siblings, 0 replies; 24+ messages in thread
From: Albert ARIBAUD @ 2011-12-19 22:02 UTC (permalink / raw)
To: u-boot
Hi Tom,
Le 19/12/2011 22:20, Tom Rini a ?crit :
> Hello,
>
> The following changes since commit a69c1beefe8d1afb34c79a324a87a8951a793a59:
> Fabio Estevam (1):
> vision2: Fix checkpatch warning
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-ti.git next
>
> Christian Riesch (7):
> spl: display_options.o is required for SPI flash support in SPL
> sf: Add spi_boot() to allow booting from SPI flash in an SPL
> arm, davinci: Add SPL support for DA850 SoCs
> arm, da850evm: Add an SPL for SPI boot
> mkimage: Fix variable length header support
> arm, davinci: Add support for generating AIS images to the Makefile
> arm, davinci: Fix build warnings for cam_enc_4xx
>
> Stefano Babic (2):
> ARM: omap3: added common configuration for Technexion TAM3517
> ARM: omap3: add support to Technexion twister board
>
> Thomas Weber (1):
> Devkit8000: Switch over to enable_gpmc_cs_config
>
> .gitignore | 1 +
> MAINTAINERS | 1 +
> Makefile | 13 +
> arch/arm/cpu/arm926ejs/davinci/Makefile | 3 +-
> arch/arm/cpu/arm926ejs/davinci/spl.c | 35 +++-
> board/davinci/da8xxevm/da850evm.c | 4 +-
> board/davinci/da8xxevm/u-boot-spl.lds | 73 ++++++
> board/technexion/twister/Makefile | 38 +++
> board/technexion/twister/twister.c | 116 +++++++++
> board/technexion/twister/twister.h | 411 +++++++++++++++++++++++++++++++
> board/timll/devkit8000/devkit8000.c | 19 +-
> boards.cfg | 1 +
> doc/README.SPL | 1 +
> doc/README.davinci | 9 +
> drivers/mtd/spi/Makefile | 4 +
> drivers/mtd/spi/spi_spl_load.c | 58 +++++
> include/configs/da850evm.h | 87 +++++++
> include/configs/tam3517-common.h | 361 +++++++++++++++++++++++++++
> include/configs/twister.h | 54 ++++
> include/spi_flash.h | 3 +
> lib/Makefile | 2 +
> tools/mkimage.c | 97 ++++----
> 22 files changed, 1333 insertions(+), 58 deletions(-)
> create mode 100644 board/davinci/da8xxevm/u-boot-spl.lds
> create mode 100644 board/technexion/twister/Makefile
> create mode 100644 board/technexion/twister/twister.c
> create mode 100644 board/technexion/twister/twister.h
> create mode 100644 drivers/mtd/spi/spi_spl_load.c
> create mode 100644 include/configs/tam3517-common.h
> create mode 100644 include/configs/twister.h
>
> Thanks!
Applied to u-boot-arm/next (to move onto master after 2011.12 is out),
thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
@ 2011-12-19 21:20 Tom Rini
2011-12-19 22:02 ` Albert ARIBAUD
0 siblings, 1 reply; 24+ messages in thread
From: Tom Rini @ 2011-12-19 21:20 UTC (permalink / raw)
To: u-boot
Hello,
The following changes since commit a69c1beefe8d1afb34c79a324a87a8951a793a59:
Fabio Estevam (1):
vision2: Fix checkpatch warning
are available in the git repository at:
git://git.denx.de/u-boot-ti.git next
Christian Riesch (7):
spl: display_options.o is required for SPI flash support in SPL
sf: Add spi_boot() to allow booting from SPI flash in an SPL
arm, davinci: Add SPL support for DA850 SoCs
arm, da850evm: Add an SPL for SPI boot
mkimage: Fix variable length header support
arm, davinci: Add support for generating AIS images to the Makefile
arm, davinci: Fix build warnings for cam_enc_4xx
Stefano Babic (2):
ARM: omap3: added common configuration for Technexion TAM3517
ARM: omap3: add support to Technexion twister board
Thomas Weber (1):
Devkit8000: Switch over to enable_gpmc_cs_config
.gitignore | 1 +
MAINTAINERS | 1 +
Makefile | 13 +
arch/arm/cpu/arm926ejs/davinci/Makefile | 3 +-
arch/arm/cpu/arm926ejs/davinci/spl.c | 35 +++-
board/davinci/da8xxevm/da850evm.c | 4 +-
board/davinci/da8xxevm/u-boot-spl.lds | 73 ++++++
board/technexion/twister/Makefile | 38 +++
board/technexion/twister/twister.c | 116 +++++++++
board/technexion/twister/twister.h | 411 +++++++++++++++++++++++++++++++
board/timll/devkit8000/devkit8000.c | 19 +-
boards.cfg | 1 +
doc/README.SPL | 1 +
doc/README.davinci | 9 +
drivers/mtd/spi/Makefile | 4 +
drivers/mtd/spi/spi_spl_load.c | 58 +++++
include/configs/da850evm.h | 87 +++++++
include/configs/tam3517-common.h | 361 +++++++++++++++++++++++++++
include/configs/twister.h | 54 ++++
include/spi_flash.h | 3 +
lib/Makefile | 2 +
tools/mkimage.c | 97 ++++----
22 files changed, 1333 insertions(+), 58 deletions(-)
create mode 100644 board/davinci/da8xxevm/u-boot-spl.lds
create mode 100644 board/technexion/twister/Makefile
create mode 100644 board/technexion/twister/twister.c
create mode 100644 board/technexion/twister/twister.h
create mode 100644 drivers/mtd/spi/spi_spl_load.c
create mode 100644 include/configs/tam3517-common.h
create mode 100644 include/configs/twister.h
Thanks!
--
Tom
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
2011-09-18 23:39 s-paulraj at ti.com
2011-09-19 7:15 ` Albert ARIBAUD
@ 2011-09-20 6:49 ` Albert ARIBAUD
1 sibling, 0 replies; 24+ messages in thread
From: Albert ARIBAUD @ 2011-09-20 6:49 UTC (permalink / raw)
To: u-boot
Le 19/09/2011 01:39, s-paulraj at ti.com a ?crit :
> Please pull u-boot-ti/next.
> I checked all the patches for checkpatch errors.
> Also all OMAP3 and OMAP4 built with no issues.
>
> Thanks,
> Sandeep
>
> The following changes since commit 3522ad62864669b335b85f5abcd136a84bbb7519:
> Ajay Bhargav (1):
> Armada100: Enable 88E3015 PHY support for GplugD
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-ti.git next
>
> Philip Balister (2):
> OMAP3: Overo: Update GPMC timing for ethernet chip
> overo: Set IEN on GPMC_CLK to support synchronous clocking.
>
> Sandeep Paulraj (1):
> devkit8000: Fix build break
>
> Simon Schwarz (9):
> omap-common/omap4: relocate early UART clock setup
> omap3: Configure RAM bank 0 if in SPL
> omap-common: add nand spl support
> spl: add NAND Library to new SPL
> spl: Add POWER library to new spl
> omap3: new SPL structure support
> devkit8000: Add nand-spl support for new SPL
> omap3: implement boot parameter saving
> omap-common: reorganize spl.c
Applied to u-boot-arm/next (and then rebased above current
u-boot/master), thanks!
(reminder: this causes a regression in orphan board smdk6400. If no new
board maintainer steps in and fixes it before 2011-12 release, the board
will be removed)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
2011-09-19 12:11 ` Albert ARIBAUD
@ 2011-09-19 14:21 ` Paulraj, Sandeep
0 siblings, 0 replies; 24+ messages in thread
From: Paulraj, Sandeep @ 2011-09-19 14:21 UTC (permalink / raw)
To: u-boot
>
> Hi Wofgang,
>
> Le 19/09/2011 09:47, Wolfgang Denk a ?crit :
> > Dear Albert ARIBAUD,
> >
> > In message<4E76EBFD.9060505@aribaud.net> you wrote:
> >>
> >> As this is your 'next' branch, there is an ambiguity: can you please
> >> indicate if you want me to pull this into my 'next' or 'master' branch?
> >>
> >> If on master, I assume you want me to also send out a pull request to
> >> Wolfgang, but I am not sure Wolfgang will allow it at this time.
> >
> > If I understand correctly this is mostly fixes, so I'd take it.
>
> Sandeep's 'next' branch is based on my 'next', not on my 'master', hence
> my question -- there would have to be a rebase if Sandeep expected me to
> pull into my master.
>
> Sandeep, can you confirm what you want exactly? Meanwhile, I am
> launching regression builds on u-boot-ti/next, just in case.
>
Albert,
The pull request if for your next branch.
Thanks,
Sandeep
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
2011-09-19 7:47 ` Wolfgang Denk
@ 2011-09-19 12:11 ` Albert ARIBAUD
2011-09-19 14:21 ` Paulraj, Sandeep
0 siblings, 1 reply; 24+ messages in thread
From: Albert ARIBAUD @ 2011-09-19 12:11 UTC (permalink / raw)
To: u-boot
Hi Wofgang,
Le 19/09/2011 09:47, Wolfgang Denk a ?crit :
> Dear Albert ARIBAUD,
>
> In message<4E76EBFD.9060505@aribaud.net> you wrote:
>>
>> As this is your 'next' branch, there is an ambiguity: can you please
>> indicate if you want me to pull this into my 'next' or 'master' branch?
>>
>> If on master, I assume you want me to also send out a pull request to
>> Wolfgang, but I am not sure Wolfgang will allow it at this time.
>
> If I understand correctly this is mostly fixes, so I'd take it.
Sandeep's 'next' branch is based on my 'next', not on my 'master', hence
my question -- there would have to be a rebase if Sandeep expected me to
pull into my master.
Sandeep, can you confirm what you want exactly? Meanwhile, I am
launching regression builds on u-boot-ti/next, just in case.
> Best regards,
>
> Wolfgang Denk
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
2011-09-19 7:15 ` Albert ARIBAUD
@ 2011-09-19 7:47 ` Wolfgang Denk
2011-09-19 12:11 ` Albert ARIBAUD
0 siblings, 1 reply; 24+ messages in thread
From: Wolfgang Denk @ 2011-09-19 7:47 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4E76EBFD.9060505@aribaud.net> you wrote:
>
> As this is your 'next' branch, there is an ambiguity: can you please
> indicate if you want me to pull this into my 'next' or 'master' branch?
>
> If on master, I assume you want me to also send out a pull request to
> Wolfgang, but I am not sure Wolfgang will allow it at this time.
If I understand correctly this is mostly fixes, so I'd take it.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If it has syntax, it isn't user friendly.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
2011-09-18 23:39 s-paulraj at ti.com
@ 2011-09-19 7:15 ` Albert ARIBAUD
2011-09-19 7:47 ` Wolfgang Denk
2011-09-20 6:49 ` Albert ARIBAUD
1 sibling, 1 reply; 24+ messages in thread
From: Albert ARIBAUD @ 2011-09-19 7:15 UTC (permalink / raw)
To: u-boot
Hi Sandeep,
Le 19/09/2011 01:39, s-paulraj at ti.com a ?crit :
> Please pull u-boot-ti/next.
> I checked all the patches for checkpatch errors.
> Also all OMAP3 and OMAP4 built with no issues.
>
> Thanks,
> Sandeep
As this is your 'next' branch, there is an ambiguity: can you please
indicate if you want me to pull this into my 'next' or 'master' branch?
If on master, I assume you want me to also send out a pull request to
Wolfgang, but I am not sure Wolfgang will allow it at this time.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
@ 2011-09-18 23:39 s-paulraj at ti.com
2011-09-19 7:15 ` Albert ARIBAUD
2011-09-20 6:49 ` Albert ARIBAUD
0 siblings, 2 replies; 24+ messages in thread
From: s-paulraj at ti.com @ 2011-09-18 23:39 UTC (permalink / raw)
To: u-boot
Please pull u-boot-ti/next.
I checked all the patches for checkpatch errors.
Also all OMAP3 and OMAP4 built with no issues.
Thanks,
Sandeep
The following changes since commit 3522ad62864669b335b85f5abcd136a84bbb7519:
Ajay Bhargav (1):
Armada100: Enable 88E3015 PHY support for GplugD
are available in the git repository at:
git://git.denx.de/u-boot-ti.git next
Philip Balister (2):
OMAP3: Overo: Update GPMC timing for ethernet chip
overo: Set IEN on GPMC_CLK to support synchronous clocking.
Sandeep Paulraj (1):
devkit8000: Fix build break
Simon Schwarz (9):
omap-common/omap4: relocate early UART clock setup
omap3: Configure RAM bank 0 if in SPL
omap-common: add nand spl support
spl: add NAND Library to new SPL
spl: Add POWER library to new spl
omap3: new SPL structure support
devkit8000: Add nand-spl support for new SPL
omap3: implement boot parameter saving
omap-common: reorganize spl.c
arch/arm/cpu/armv7/omap-common/Makefile | 6 +
arch/arm/cpu/armv7/omap-common/spl.c | 165 +++---------------
arch/arm/cpu/armv7/omap-common/spl_mmc.c | 150 ++++++++++++++++
arch/arm/cpu/armv7/omap-common/spl_nand.c | 71 ++++++++
arch/arm/cpu/armv7/omap3/board.c | 50 ++++++-
arch/arm/cpu/armv7/omap3/config.mk | 30 ++++
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 10 +
arch/arm/cpu/armv7/omap3/sdrc.c | 32 ++++-
arch/arm/cpu/armv7/omap4/board.c | 1 +
arch/arm/include/asm/arch-omap3/mem.h | 36 ++++
arch/arm/include/asm/arch-omap3/omap_gpmc.h | 9 +
arch/arm/include/asm/arch-omap3/sys_proto.h | 1 +
arch/arm/include/asm/omap_common.h | 31 ++++
board/isee/igep0020/igep0020.c | 1 +
board/isee/igep0020/igep0020.h | 9 -
board/overo/overo.c | 1 +
board/overo/overo.h | 11 +-
board/timll/devkit8000/devkit8000.c | 2 +-
doc/README.SPL | 2 +
drivers/mtd/nand/Makefile | 10 +-
drivers/mtd/nand/nand_base.c | 4 +-
drivers/mtd/nand/nand_spl_simple.c | 245 +++++++++++++++++++++++++++
drivers/mtd/nand/omap_gpmc.c | 27 +++
include/configs/devkit8000.h | 46 +++++
include/nand.h | 6 +
spl/Makefile | 2 +
26 files changed, 794 insertions(+), 164 deletions(-)
create mode 100644 arch/arm/cpu/armv7/omap-common/spl_mmc.c
create mode 100644 arch/arm/cpu/armv7/omap-common/spl_nand.c
create mode 100644 arch/arm/cpu/armv7/omap3/config.mk
create mode 100644 drivers/mtd/nand/nand_spl_simple.c
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please Pull u-boot-ti/next
@ 2010-12-21 1:09 s-paulraj at ti.com
0 siblings, 0 replies; 24+ messages in thread
From: s-paulraj at ti.com @ 2010-12-21 1:09 UTC (permalink / raw)
To: u-boot
Wolfgang,
Please pull u-boot-ti/next
The DaVinci MMC/SD patches were acked by Andy long ago but never made it
to any tree. Please look at
http://www.mail-archive.com/u-boot at lists.denx.de/msg32375.html
I am trying to upstream the patches as the original author
seems busy
Regards,
Sandeep
The following changes since commit b8339e2b9f32663411dba0f48e25b23f542d53bc:
Matthew McClintock (1):
p1022ds: enable reginfo command
are available in the git repository at:
git://git.denx.de/u-boot-ti.git next
Mike Rapoport (1):
OMAP3: add CM-T35 board
Sandeep Paulraj (3):
Davinci MMCSD Support
DaVinci DM355: Adding MMC/SD support for DM355 EVM
DaVinci DM365: Adding MMC/SD support for DM365 EVM
MAINTAINERS | 4 +
arch/arm/include/asm/arch-davinci/sdmmc_defs.h | 175 ++++++++++
board/cm_t35/Makefile | 47 +++
board/cm_t35/cm_t35.c | 371 ++++++++++++++++++++++
board/davinci/dm355evm/dm355evm.c | 41 +++
board/davinci/dm365evm/dm365evm.c | 49 +++
boards.cfg | 1 +
doc/README.omap3 | 16 +-
drivers/mmc/Makefile | 1 +
drivers/mmc/davinci_mmc.c | 404 ++++++++++++++++++++++++
include/configs/cm_t35.h | 352 +++++++++++++++++++++
include/configs/davinci_dm355evm.h | 22 ++
include/configs/davinci_dm365evm.h | 22 ++
include/mmc.h | 3 +
14 files changed, 1506 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/include/asm/arch-davinci/sdmmc_defs.h
create mode 100644 board/cm_t35/Makefile
create mode 100644 board/cm_t35/cm_t35.c
create mode 100644 drivers/mmc/davinci_mmc.c
create mode 100644 include/configs/cm_t35.h
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
2010-12-11 16:08 [U-Boot] Please pull u-boot-ti/next s-paulraj at ti.com
2010-12-11 16:24 ` Albert ARIBAUD
@ 2010-12-13 22:54 ` Wolfgang Denk
1 sibling, 0 replies; 24+ messages in thread
From: Wolfgang Denk @ 2010-12-13 22:54 UTC (permalink / raw)
To: u-boot
Dear s-paulraj at ti.com,
In message <1292083690-17647-1-git-send-email-s-paulraj@ti.com> you wrote:
> Wolfgang,
>
> Please pull u-boot-ti/next
>
> After adding the twl6030 patch i realized that Albert delegated this patch to himself.
> But i have seen no comments from him. So i did not ammend the pull request.
> If he has issues with this patch, we can drop it.
>
> Thanks,
> Sandeep
>
> The following changes since commit 917a62c0d292d9da45100a76151a9fa2d13a9cdc:
> Sandeep Paulraj (1):
> Merge branch 'next' of git://git.denx.de/u-boot into next
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-ti.git next
>
> Balaji T K (1):
> ARMV7: OMAP4: twl6030 add battery charging support
>
> Dirk Behme (1):
> OMAP3: SPI driver
>
> board/ti/sdp4430/Makefile | 2 +-
> board/ti/sdp4430/cmd_bat.c | 58 +++++++
> board/ti/sdp4430/sdp.c | 4 +
> drivers/power/twl6030.c | 124 ++++++++++++++-
> drivers/spi/Makefile | 1 +
> drivers/spi/omap3_spi.c | 352 +++++++++++++++++++++++++++++++++++++++
> drivers/spi/omap3_spi.h | 117 +++++++++++++
> include/configs/omap3_beagle.h | 2 +
> include/configs/omap4_sdp4430.h | 1 +
> include/twl6030.h | 45 +++++-
> 10 files changed, 701 insertions(+), 5 deletions(-)
> create mode 100644 board/ti/sdp4430/cmd_bat.c
> create mode 100644 drivers/spi/omap3_spi.c
> create mode 100644 drivers/spi/omap3_spi.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Don't have a battle of wits with an unarmed opponent.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
2010-12-11 16:08 [U-Boot] Please pull u-boot-ti/next s-paulraj at ti.com
@ 2010-12-11 16:24 ` Albert ARIBAUD
2010-12-13 22:54 ` Wolfgang Denk
1 sibling, 0 replies; 24+ messages in thread
From: Albert ARIBAUD @ 2010-12-11 16:24 UTC (permalink / raw)
To: u-boot
Le 11/12/2010 17:08, s-paulraj at ti.com a ?crit :
> Wolfgang,
>
> Please pull u-boot-ti/next
>
> After adding the twl6030 patch i realized that Albert delegated this patch to himself.
> But i have seen no comments from him. So i did not ammend the pull request.
> If he has issues with this patch, we can drop it.
>
> Thanks,
> Sandeep
Hi Sandeep,
I'd delegated this patch to me based on the idea that it was not a
bugfix and could wait for after 2010.12 was out, so I'd moved it aside.
But since you already applied it to u-boot-ti, that's ok with me. For
the sake of it, I'll re-delegate it to you and you can then mark it
waiting for upstream. :)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
@ 2010-12-11 16:08 s-paulraj at ti.com
2010-12-11 16:24 ` Albert ARIBAUD
2010-12-13 22:54 ` Wolfgang Denk
0 siblings, 2 replies; 24+ messages in thread
From: s-paulraj at ti.com @ 2010-12-11 16:08 UTC (permalink / raw)
To: u-boot
Wolfgang,
Please pull u-boot-ti/next
After adding the twl6030 patch i realized that Albert delegated this patch to himself.
But i have seen no comments from him. So i did not ammend the pull request.
If he has issues with this patch, we can drop it.
Thanks,
Sandeep
The following changes since commit 917a62c0d292d9da45100a76151a9fa2d13a9cdc:
Sandeep Paulraj (1):
Merge branch 'next' of git://git.denx.de/u-boot into next
are available in the git repository at:
git://git.denx.de/u-boot-ti.git next
Balaji T K (1):
ARMV7: OMAP4: twl6030 add battery charging support
Dirk Behme (1):
OMAP3: SPI driver
board/ti/sdp4430/Makefile | 2 +-
board/ti/sdp4430/cmd_bat.c | 58 +++++++
board/ti/sdp4430/sdp.c | 4 +
drivers/power/twl6030.c | 124 ++++++++++++++-
drivers/spi/Makefile | 1 +
drivers/spi/omap3_spi.c | 352 +++++++++++++++++++++++++++++++++++++++
drivers/spi/omap3_spi.h | 117 +++++++++++++
include/configs/omap3_beagle.h | 2 +
include/configs/omap4_sdp4430.h | 1 +
include/twl6030.h | 45 +++++-
10 files changed, 701 insertions(+), 5 deletions(-)
create mode 100644 board/ti/sdp4430/cmd_bat.c
create mode 100644 drivers/spi/omap3_spi.c
create mode 100644 drivers/spi/omap3_spi.h
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
2010-11-30 16:59 s-paulraj at ti.com
@ 2010-11-30 20:39 ` Wolfgang Denk
0 siblings, 0 replies; 24+ messages in thread
From: Wolfgang Denk @ 2010-11-30 20:39 UTC (permalink / raw)
To: u-boot
Dear s-paulraj at ti.com,
In message <1291136354-11693-1-git-send-email-s-paulraj@ti.com> you wrote:
> The following changes since commit c87f6457bb9cb465e9630b00b4c824847a62c6c5:
> Mike Frysinger (1):
> ext2: constify file/dir names
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-ti.git next
>
> Stefano Babic (3):
> da850: Enable SPI Flash
> Davinci 8xx: Move common functions to share code
> Davinci: add support for the ea20 board
>
> Sudhakar Rajashekhara (2):
> da8xx: Add cpu_is_da8xx macros
> da850: Add RMII support for EMAC
>
> Sughosh Ganu (3):
> Move and rename common headers from under
> Remove board_init_f function from nand_boot.c
> Add board support for hawkboard
>
> MAINTAINERS | 6 +
> .../arm/include/asm/arch-davinci/davinci_misc.h | 15 ++
> arch/arm/include/asm/arch-davinci/hardware.h | 37 ++++-
> board/davinci/common/Makefile | 2 +-
> board/davinci/common/davinci_pinmux.c | 105 ++++++++++
> board/davinci/common/misc.c | 99 ++++------
> board/davinci/da8xxevm/Makefile | 2 +-
> board/davinci/da8xxevm/common.c | 55 ------
> board/davinci/da8xxevm/common.h | 30 ---
> board/davinci/da8xxevm/da830evm.c | 3 +-
> board/davinci/da8xxevm/da850evm.c | 115 +++++++++++-
> board/davinci/da8xxevm/hawkboard.c | 68 +++++++
> board/davinci/da8xxevm/hawkboard_nand_spl.c | 157 +++++++++++++++
> board/davinci/dm355evm/dm355evm.c | 2 +-
> board/davinci/dm355leopard/dm355leopard.c | 2 +-
> board/davinci/dm365evm/dm365evm.c | 2 +-
> board/davinci/dvevm/dvevm.c | 2 +-
> board/davinci/ea20/Makefile | 53 +++++
> board/davinci/ea20/ea20.c | 196 +++++++++++++++++++
> board/davinci/schmoogie/schmoogie.c | 2 +-
> board/davinci/sffsdr/sffsdr.c | 2 +-
> board/davinci/sonata/sonata.c | 2 +-
> board/samsung/smdk6400/smdk6400_nand_spl.c | 37 ++++
> boards.cfg | 4 +
> doc/README.hawkboard | 93 +++++++++
> drivers/net/davinci_emac.c | 41 ++++-
> include/configs/da850evm.h | 29 +++
> include/configs/ea20.h | 192 ++++++++++++++++++
> include/configs/hawkboard.h | 206 ++++++++++++++++++++
> nand_spl/board/davinci/da8xxevm/Makefile | 141 +++++++++++++
> nand_spl/board/davinci/da8xxevm/u-boot.lds | 75 +++++++
> nand_spl/board/samsung/smdk6400/Makefile | 6 +-
> nand_spl/nand_boot.c | 9 +-
> 33 files changed, 1615 insertions(+), 175 deletions(-)
> rename board/davinci/common/misc.h => arch/arm/include/asm/arch-davinci/davinci_misc.h (80%)
> create mode 100644 board/davinci/common/davinci_pinmux.c
> delete mode 100644 board/davinci/da8xxevm/common.c
> delete mode 100644 board/davinci/da8xxevm/common.h
> create mode 100644 board/davinci/da8xxevm/hawkboard.c
> create mode 100644 board/davinci/da8xxevm/hawkboard_nand_spl.c
> create mode 100644 board/davinci/ea20/Makefile
> create mode 100644 board/davinci/ea20/ea20.c
> create mode 100644 board/samsung/smdk6400/smdk6400_nand_spl.c
> create mode 100644 doc/README.hawkboard
> create mode 100644 include/configs/ea20.h
> create mode 100644 include/configs/hawkboard.h
> create mode 100644 nand_spl/board/davinci/da8xxevm/Makefile
> create mode 100644 nand_spl/board/davinci/da8xxevm/u-boot.lds
Applied to u-boot-arm # next, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The universe, they said, depended for its operation on the balance of
four forces which they identified as charm, persuasion, uncertainty
and bloody-mindedness. -- Terry Pratchett, "The Light Fantastic"
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please pull u-boot-ti/next
@ 2010-11-30 16:59 s-paulraj at ti.com
2010-11-30 20:39 ` Wolfgang Denk
0 siblings, 1 reply; 24+ messages in thread
From: s-paulraj at ti.com @ 2010-11-30 16:59 UTC (permalink / raw)
To: u-boot
The following changes since commit c87f6457bb9cb465e9630b00b4c824847a62c6c5:
Mike Frysinger (1):
ext2: constify file/dir names
are available in the git repository at:
git://git.denx.de/u-boot-ti.git next
Stefano Babic (3):
da850: Enable SPI Flash
Davinci 8xx: Move common functions to share code
Davinci: add support for the ea20 board
Sudhakar Rajashekhara (2):
da8xx: Add cpu_is_da8xx macros
da850: Add RMII support for EMAC
Sughosh Ganu (3):
Move and rename common headers from under
Remove board_init_f function from nand_boot.c
Add board support for hawkboard
MAINTAINERS | 6 +
.../arm/include/asm/arch-davinci/davinci_misc.h | 15 ++
arch/arm/include/asm/arch-davinci/hardware.h | 37 ++++-
board/davinci/common/Makefile | 2 +-
board/davinci/common/davinci_pinmux.c | 105 ++++++++++
board/davinci/common/misc.c | 99 ++++------
board/davinci/da8xxevm/Makefile | 2 +-
board/davinci/da8xxevm/common.c | 55 ------
board/davinci/da8xxevm/common.h | 30 ---
board/davinci/da8xxevm/da830evm.c | 3 +-
board/davinci/da8xxevm/da850evm.c | 115 +++++++++++-
board/davinci/da8xxevm/hawkboard.c | 68 +++++++
board/davinci/da8xxevm/hawkboard_nand_spl.c | 157 +++++++++++++++
board/davinci/dm355evm/dm355evm.c | 2 +-
board/davinci/dm355leopard/dm355leopard.c | 2 +-
board/davinci/dm365evm/dm365evm.c | 2 +-
board/davinci/dvevm/dvevm.c | 2 +-
board/davinci/ea20/Makefile | 53 +++++
board/davinci/ea20/ea20.c | 196 +++++++++++++++++++
board/davinci/schmoogie/schmoogie.c | 2 +-
board/davinci/sffsdr/sffsdr.c | 2 +-
board/davinci/sonata/sonata.c | 2 +-
board/samsung/smdk6400/smdk6400_nand_spl.c | 37 ++++
boards.cfg | 4 +
doc/README.hawkboard | 93 +++++++++
drivers/net/davinci_emac.c | 41 ++++-
include/configs/da850evm.h | 29 +++
include/configs/ea20.h | 192 ++++++++++++++++++
include/configs/hawkboard.h | 206 ++++++++++++++++++++
nand_spl/board/davinci/da8xxevm/Makefile | 141 +++++++++++++
nand_spl/board/davinci/da8xxevm/u-boot.lds | 75 +++++++
nand_spl/board/samsung/smdk6400/Makefile | 6 +-
nand_spl/nand_boot.c | 9 +-
33 files changed, 1615 insertions(+), 175 deletions(-)
rename board/davinci/common/misc.h => arch/arm/include/asm/arch-davinci/davinci_misc.h (80%)
create mode 100644 board/davinci/common/davinci_pinmux.c
delete mode 100644 board/davinci/da8xxevm/common.c
delete mode 100644 board/davinci/da8xxevm/common.h
create mode 100644 board/davinci/da8xxevm/hawkboard.c
create mode 100644 board/davinci/da8xxevm/hawkboard_nand_spl.c
create mode 100644 board/davinci/ea20/Makefile
create mode 100644 board/davinci/ea20/ea20.c
create mode 100644 board/samsung/smdk6400/smdk6400_nand_spl.c
create mode 100644 doc/README.hawkboard
create mode 100644 include/configs/ea20.h
create mode 100644 include/configs/hawkboard.h
create mode 100644 nand_spl/board/davinci/da8xxevm/Makefile
create mode 100644 nand_spl/board/davinci/da8xxevm/u-boot.lds
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please Pull u-boot-ti/next
2010-06-22 15:29 [U-Boot] Please Pull u-boot-ti/next s-paulraj at ti.com
@ 2010-06-29 19:59 ` Wolfgang Denk
0 siblings, 0 replies; 24+ messages in thread
From: Wolfgang Denk @ 2010-06-29 19:59 UTC (permalink / raw)
To: u-boot
Dear s-paulraj at ti.com,
In message <1277220546-18148-1-git-send-email-s-paulraj@ti.com> you wrote:
> Wolfgang,
>
> Please pull u-boot-ti/next.
> I ran MAKEALL and so no issues.
>
> Thanks,
> Sandeep
>
> The following changes since commit 54e19a7ded6e9dbdc3392a57d82f4f77b34e85b8:
> Wolfgang Denk (1):
> Merge branch 'master' into next
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-ti.git next
>
> Nick Thompson (1):
> Davinci: SPI performance enhancements
>
> Prakash PM (1):
> DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files
>
> arch/arm/include/asm/arch-davinci/emac_defs.h | 2 +-
> drivers/spi/davinci_spi.c | 195 ++++++++++++++++---------
> include/configs/da830evm.h | 1 +
> include/configs/davinci_dm365evm.h | 1 +
> include/configs/davinci_dvevm.h | 1 +
> include/configs/davinci_schmoogie.h | 1 +
> include/configs/davinci_sffsdr.h | 1 +
> include/configs/davinci_sonata.h | 1 +
> 8 files changed, 135 insertions(+), 68 deletions(-)
Applied to "next" branch.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Live long and prosper.
-- Spock, "Amok Time", stardate 3372.7
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Please Pull u-boot-ti/next
@ 2010-06-22 15:29 s-paulraj at ti.com
2010-06-29 19:59 ` Wolfgang Denk
0 siblings, 1 reply; 24+ messages in thread
From: s-paulraj at ti.com @ 2010-06-22 15:29 UTC (permalink / raw)
To: u-boot
Wolfgang,
Please pull u-boot-ti/next.
I ran MAKEALL and so no issues.
Thanks,
Sandeep
The following changes since commit 54e19a7ded6e9dbdc3392a57d82f4f77b34e85b8:
Wolfgang Denk (1):
Merge branch 'master' into next
are available in the git repository at:
git://git.denx.de/u-boot-ti.git next
Nick Thompson (1):
Davinci: SPI performance enhancements
Prakash PM (1):
DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files
arch/arm/include/asm/arch-davinci/emac_defs.h | 2 +-
drivers/spi/davinci_spi.c | 195 ++++++++++++++++---------
include/configs/da830evm.h | 1 +
include/configs/davinci_dm365evm.h | 1 +
include/configs/davinci_dvevm.h | 1 +
include/configs/davinci_schmoogie.h | 1 +
include/configs/davinci_sffsdr.h | 1 +
include/configs/davinci_sonata.h | 1 +
8 files changed, 135 insertions(+), 68 deletions(-)
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2012-07-09 20:39 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-03-16 17:15 [U-Boot] Please pull u-boot-ti/next Tom Rini
2012-03-26 19:06 ` Tom Rini
2012-03-26 20:55 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2012-07-09 18:46 Tom Rini
2012-07-09 20:39 ` Albert ARIBAUD
2012-04-20 16:26 Tom Rini
2012-04-20 17:11 ` Albert ARIBAUD
2012-04-02 16:49 Tom Rini
2011-12-19 21:20 Tom Rini
2011-12-19 22:02 ` Albert ARIBAUD
2011-09-18 23:39 s-paulraj at ti.com
2011-09-19 7:15 ` Albert ARIBAUD
2011-09-19 7:47 ` Wolfgang Denk
2011-09-19 12:11 ` Albert ARIBAUD
2011-09-19 14:21 ` Paulraj, Sandeep
2011-09-20 6:49 ` Albert ARIBAUD
2010-12-21 1:09 [U-Boot] Please Pull u-boot-ti/next s-paulraj at ti.com
2010-12-11 16:08 [U-Boot] Please pull u-boot-ti/next s-paulraj at ti.com
2010-12-11 16:24 ` Albert ARIBAUD
2010-12-13 22:54 ` Wolfgang Denk
2010-11-30 16:59 s-paulraj at ti.com
2010-11-30 20:39 ` Wolfgang Denk
2010-06-22 15:29 [U-Boot] Please Pull u-boot-ti/next s-paulraj at ti.com
2010-06-29 19:59 ` Wolfgang Denk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.