* [PATCH] Add Atheros maryann PIDVID support
@ 2012-02-21 11:09 acho
2012-02-21 11:16 ` Marcel Holtmann
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: acho @ 2012-02-21 11:09 UTC (permalink / raw)
To: marcel, padovan, linux-bluetooth; +Cc: oneukum, acho, jlee
From: Cho, Yu-Chen <acho@suse.com>
Add Atheros maryann 0cf3:311d PIDVID support
This module is AR3012 Series.
Include /sys/kernel/debug/usb/devices output here for reference
before:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=311d Rev= 0.01
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
after:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=311d Rev= 0.02
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 07f14d1..be21d47 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -71,6 +71,7 @@ static struct usb_device_id ath3k_table[] = {
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3004) },
+ { USB_DEVICE(0x0CF3, 0x311D) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -87,6 +88,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
{ } /* Terminating entry */
};
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index f00f596..f1b5e1c 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -126,6 +126,7 @@ static struct usb_device_id blacklist_table[] = {
/* Atheros 3012 with sflash firmware */
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
--
1.7.7
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH] Add Atheros maryann PIDVID support
2012-02-21 11:09 [PATCH] Add Atheros maryann PIDVID support acho
@ 2012-02-21 11:16 ` Marcel Holtmann
2012-03-16 15:24 ` Johan Hedberg
2012-04-12 21:58 ` [3.0.y, 3.2.y, 3.3.y] " Jonathan Nieder
2 siblings, 0 replies; 8+ messages in thread
From: Marcel Holtmann @ 2012-02-21 11:16 UTC (permalink / raw)
To: acho; +Cc: padovan, linux-bluetooth, oneukum, jlee
Hi Yu-Chen,
> Add Atheros maryann 0cf3:311d PIDVID support
> This module is AR3012 Series.
>
> Include /sys/kernel/debug/usb/devices output here for reference
>
> before:
> T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0cf3 ProdID=311d Rev= 0.01
> S: Manufacturer=Atheros Communications
> S: Product=Bluetooth USB Host Controller
> S: SerialNumber=Alaska Day 2006
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> after:
> T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0cf3 ProdID=311d Rev= 0.02
> S: Manufacturer=Atheros Communications
> S: Product=Bluetooth USB Host Controller
> S: SerialNumber=Alaska Day 2006
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> Signed-off-by: Cho, Yu-Chen <acho@suse.com>
> ---
> drivers/bluetooth/ath3k.c | 2 ++
> drivers/bluetooth/btusb.c | 1 +
> 2 files changed, 3 insertions(+), 0 deletions(-)
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Regards
Marcel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] Add Atheros maryann PIDVID support
2012-02-21 11:09 [PATCH] Add Atheros maryann PIDVID support acho
2012-02-21 11:16 ` Marcel Holtmann
@ 2012-03-16 15:24 ` Johan Hedberg
2012-03-28 21:36 ` Jonathan Nieder
2012-04-12 21:58 ` [3.0.y, 3.2.y, 3.3.y] " Jonathan Nieder
2 siblings, 1 reply; 8+ messages in thread
From: Johan Hedberg @ 2012-03-16 15:24 UTC (permalink / raw)
To: acho; +Cc: marcel, padovan, linux-bluetooth, oneukum, jlee
Hi,
On Tue, Feb 21, 2012, acho@suse.com wrote:
> From: Cho, Yu-Chen <acho@suse.com>
>
> Add Atheros maryann 0cf3:311d PIDVID support
> This module is AR3012 Series.
>
> Include /sys/kernel/debug/usb/devices output here for reference
>
> before:
> T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0cf3 ProdID=311d Rev= 0.01
> S: Manufacturer=Atheros Communications
> S: Product=Bluetooth USB Host Controller
> S: SerialNumber=Alaska Day 2006
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> after:
> T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0cf3 ProdID=311d Rev= 0.02
> S: Manufacturer=Atheros Communications
> S: Product=Bluetooth USB Host Controller
> S: SerialNumber=Alaska Day 2006
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> Signed-off-by: Cho, Yu-Chen <acho@suse.com>
> ---
> drivers/bluetooth/ath3k.c | 2 ++
> drivers/bluetooth/btusb.c | 1 +
> 2 files changed, 3 insertions(+), 0 deletions(-)
Applied to my bluetooth-next tree. Thanks.
Johan
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] Add Atheros maryann PIDVID support
2012-03-16 15:24 ` Johan Hedberg
@ 2012-03-28 21:36 ` Jonathan Nieder
2012-03-30 10:09 ` Johan Hedberg
0 siblings, 1 reply; 8+ messages in thread
From: Jonathan Nieder @ 2012-03-28 21:36 UTC (permalink / raw)
To: Johan Hedberg
Cc: Cho, Yu-Chen, Marcel Holtmann, Gustavo Padovan, linux-bluetooth,
Oliver Neukum, Lee, Chun-Yi, Henry-Nicolas Tourneur
Hi,
Johan Hedberg wrote:
> On Tue, Feb 21, 2012, Cho, Yu-Chen wrote:
>> Add Atheros maryann 0cf3:311d PIDVID support
>> This module is AR3012 Series.
[...]
> Applied to my bluetooth-next tree. Thanks.
Thanks.
Tested-by: Henry-Nicolas Tourneur <henry.nicolas@tourneur.be> # 3.0.y
[1] has details. Is this targetted at 3.4 or some later kernel?
Ciao,
Jonathan
[1] http://bugs.debian.org/664726
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] Add Atheros maryann PIDVID support
2012-03-28 21:36 ` Jonathan Nieder
@ 2012-03-30 10:09 ` Johan Hedberg
0 siblings, 0 replies; 8+ messages in thread
From: Johan Hedberg @ 2012-03-30 10:09 UTC (permalink / raw)
To: Jonathan Nieder
Cc: Cho, Yu-Chen, Marcel Holtmann, Gustavo Padovan, linux-bluetooth,
Oliver Neukum, Lee, Chun-Yi, Henry-Nicolas Tourneur
Hi Jonathan,
On Wed, Mar 28, 2012, Jonathan Nieder wrote:
> Hi,
>
> Johan Hedberg wrote:
> > On Tue, Feb 21, 2012, Cho, Yu-Chen wrote:
>
> >> Add Atheros maryann 0cf3:311d PIDVID support
> >> This module is AR3012 Series.
> [...]
> > Applied to my bluetooth-next tree. Thanks.
>
> Thanks.
>
> Tested-by: Henry-Nicolas Tourneur <henry.nicolas@tourneur.be> # 3.0.y
>
> [1] has details. Is this targetted at 3.4 or some later kernel?
Gustavo seems to have applied it to bluetooth.git too so it's on its way
to 3.4.
Johan
^ permalink raw reply [flat|nested] 8+ messages in thread
* [3.0.y, 3.2.y, 3.3.y] Re: [PATCH] Add Atheros maryann PIDVID support
2012-02-21 11:09 [PATCH] Add Atheros maryann PIDVID support acho
2012-02-21 11:16 ` Marcel Holtmann
2012-03-16 15:24 ` Johan Hedberg
@ 2012-04-12 21:58 ` Jonathan Nieder
2012-04-19 19:46 ` Greg KH
2 siblings, 1 reply; 8+ messages in thread
From: Jonathan Nieder @ 2012-04-12 21:58 UTC (permalink / raw)
To: stable
Cc: linux-bluetooth, Cho, Yu-Chen, Henry-Nicolas Tourneur,
Marcel Holtmann, Gustavo Padovan, Johan Hedberg, Oliver Neukum,
Lee, Chun-Yi, Greg KH
Hi Greg,
Please consider
9498ba7a1d38 Bluetooth: Adding USB device 13d3:3375 as an Atheros AR3012
07c0ea874d43 Bluetooth: Add Atheros maryann PIDVID support
for application to the 3.0.y, 3.2.y, and 3.3.y stable trees. These
add additional USB IDs to the list recognized by the ath3k firmware
loader.
Henry-Nicolas Tourneur wrote[1]:
> I did just complete a test using a 3.0.25 and it's working with the
> patched kernel.
> rfkill switches are working and pairing is working too :)
>
> All done using Wheezy bluetooth stack with gnome tools.
so the second of the two patches is
Tested-by: Henry-Nicolas Tourneur <henry.nicolas@tourneur.be>
Both patches have been in linux-next for a while. The first reached
Linus's master a few weeks ago and the second hit master today.
Thanks,
Jonathan
[1] http://bugs.debian.org/664726
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [3.0.y, 3.2.y, 3.3.y] Re: [PATCH] Add Atheros maryann PIDVID support
2012-04-12 21:58 ` [3.0.y, 3.2.y, 3.3.y] " Jonathan Nieder
@ 2012-04-19 19:46 ` Greg KH
2012-04-19 20:52 ` Jonathan Nieder
0 siblings, 1 reply; 8+ messages in thread
From: Greg KH @ 2012-04-19 19:46 UTC (permalink / raw)
To: Jonathan Nieder
Cc: stable, linux-bluetooth, Cho, Yu-Chen, Henry-Nicolas Tourneur,
Marcel Holtmann, Gustavo Padovan, Johan Hedberg, Oliver Neukum,
Lee, Chun-Yi
On Thu, Apr 12, 2012 at 04:58:20PM -0500, Jonathan Nieder wrote:
> Hi Greg,
>
> Please consider
>
> 9498ba7a1d38 Bluetooth: Adding USB device 13d3:3375 as an Atheros AR3012
> 07c0ea874d43 Bluetooth: Add Atheros maryann PIDVID support
>
> for application to the 3.0.y, 3.2.y, and 3.3.y stable trees. These
> add additional USB IDs to the list recognized by the ath3k firmware
> loader.
Now applied, thanks.
greg k-h
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [3.0.y, 3.2.y, 3.3.y] Re: [PATCH] Add Atheros maryann PIDVID support
2012-04-19 19:46 ` Greg KH
@ 2012-04-19 20:52 ` Jonathan Nieder
0 siblings, 0 replies; 8+ messages in thread
From: Jonathan Nieder @ 2012-04-19 20:52 UTC (permalink / raw)
To: Greg KH
Cc: stable, linux-bluetooth, Cho, Yu-Chen, Henry-Nicolas Tourneur,
Marcel Holtmann, Gustavo Padovan, Johan Hedberg, Oliver Neukum,
Lee, Chun-Yi
Greg KH wrote:
> On Thu, Apr 12, 2012 at 04:58:20PM -0500, Jonathan Nieder wrote:
>> 9498ba7a1d38 Bluetooth: Adding USB device 13d3:3375 as an Atheros AR3012
>> 07c0ea874d43 Bluetooth: Add Atheros maryann PIDVID support
[...]
> Now applied, thanks.
Looks good. Thanks, Greg.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2012-04-19 20:52 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-02-21 11:09 [PATCH] Add Atheros maryann PIDVID support acho
2012-02-21 11:16 ` Marcel Holtmann
2012-03-16 15:24 ` Johan Hedberg
2012-03-28 21:36 ` Jonathan Nieder
2012-03-30 10:09 ` Johan Hedberg
2012-04-12 21:58 ` [3.0.y, 3.2.y, 3.3.y] " Jonathan Nieder
2012-04-19 19:46 ` Greg KH
2012-04-19 20:52 ` Jonathan Nieder
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.