From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-arm/master
Date: Fri, 30 Mar 2012 19:58:02 +0200 [thread overview]
Message-ID: <20120330175802.B4941200247@gemini.denx.de> (raw)
In-Reply-To: <4F755C4A.5090606@aribaud.net>
Dear Albert ARIBAUD,
In message <4F755C4A.5090606@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 7cb30b13f12077c7eec8ce2419cd96cd65ace8e2:
>
> Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash
> (2012-03-23 21:59:16 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> Anatolij Gustschin (4):
> nhk8815: fix build errors
> board/vpac270/onenand.c: Fix build errors
> board/ti/beagle/beagle.c: Fix build warnings
> arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix build warnings
>
> Andreas Bie?mann (1):
> atmel-boards: add missing atmel_mci.h
>
> Chander Kashyap (1):
> EXYNOS: Add structure for Exynos4 DMC
>
> Christian Riesch (1):
> calimain, enbw_cmc: Fix typo in comments
>
> David M?ller (ELSOFT AG) (1):
> ARM: fix s3c2410 timer code
>
> Dirk Behme (2):
> mx6q: mx6qsabrelite: Update the README
> imximage: Remove overwriting of flash_offset
>
> Doug Anderson (1):
> EXYNOS: SMDK5250: Support all 4 UARTs
>
> Eric Nelson (6):
> i.MX6: mx6qsabrelite: add ext2 support
> mx6q: mx6qsabrelite: setup_spi() should be called in board_init
> to allow use for environment
> i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG
> i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE
> net: force PKTALIGN to ARCH_DMA_MINALIGN
> net: fec_mxc: allow use with cache enabled
>
> Fabio Estevam (15):
> mx51evk: Fix CONFIG_SYS_MEMTEST_END
> mx53evk: Fix CONFIG_SYS_MEMTEST_END
> mx53smd: Fix CONFIG_SYS_MEMTEST_END
> efikamx: Fix CONFIG_SYS_MEMTEST_END
> mx31pdk: Fix CONFIG_SYS_MEMTEST_END
> mx6: Fix reset cause for Power On Reset case
> mx6: Remove duplicate definition of ANATOP_BASE_ADDR
> pmic_i2c: Return error in case of invalid pmic_i2c_tx_num
> mxs_spi: Return proper timeout error
> mx6: Read silicon revision from register
> USB: ehci-mx6: Add proper IO accessors
> mx28evk: Provide default values for SPI bus and chip select
> configs: imx: Use CONFIG_SF_DEFAULT_CS
> mx53: Make PLL2 to be the parent of UART clock
> mx53ard: Initialize return code with error
>
> Grazvydas Ignotas (1):
> twl4030: fix potential power supply handling issues
>
> Heiko Schocher (1):
> ARM: davinci: fixes for cam_enc_4xx board
>
> Helmut Raiger (1):
> mx31: add "ARM11P power gating" to get_reset_cause
>
> Jason Hobbs (1):
> ARM: highbank: change env config to use nvram
>
> Marek Vasut (23):
> PXA: Remove PXA PCMCIA support
> PXA: Fix warning in zipitz2
> PXA: Fix missing get_tbclk() breaking vpac boards
> M28: Fix LCD PINMUX
> M28: Support for the old M28 SoM v1.0
> i.MX28: Reformat the DRAM memory configuration data
> Examples: Properly append LDFLAGS to LD command
> IXP: Make IXP buildable with arm-linux- toolchains
> IXP: Fix missing MACH_TYPE_{ACTUX?,PNB3,DVLHOST}
> IXP: Squash warnings in IXP NPE
> IXP: Move PDNB3 and SCPU from Makefile to boards.cfg
> IXP: Fix NAND build warning on PDNB3 and SCPU
> IXP: Fix GPIO_INT_ACT_LOW_SET()
> i.MX28: Enable additional DRAM address bits
> i.MX28: Make the stabilization delays shorter
> i.MX28: Drop __naked function from spl_mem_init
> ARM926EJS: Implement cache operations
> i.MX28: Add cache support into the APBH DMA driver
> i.MX28: Add cache support to MXS NAND driver
> MMC: Implement generic bounce buffer
> i.MX28: Do data transfers via DMA in MMC driver
> i.MX28: Make use of the bounce buffer
> i.MX28: Enable caches by default
>
> Matt Porter (2):
> SPL: Add YMODEM over UART load support
> SPL: Enable YMODEM support on BeagleBone and AM335x EVM
>
> Rob Herring (8):
> net: calxedaxgmac: fix build due to missing __aligned definition
> ARM: highbank: fix warning for calxedaxgmac_initialize
> ARM: highbank: add missing get_tbclk
> ARM: highbank: fix us_to_tick calculation
> ARM: highbank: change TEXT_BASE to 0x8000
> ARM: highbank: Add boot counter support
> ARM: highbank: add reset support
> ARM: highbank: setup env from boot source register
>
> Robert Delien (5):
> i.mx28: Added register definitions for DIGCTL registers
> i.mx28: Replaced magic numbers for scratch register addresses
> with register definitions
> Renamed mx28_register to mx28_register_32 to prepare for
> mx28_register_8
> Introducing 8-bit wide register, mx28_register_8
> Fix erroneous 32-bit access to hw_clkctrl_frac0 and
> hw_clkctrl_frac1 registers
>
> Simon Glass (39):
> arm: Remove jornada link script
> fdt: Add fdtdec_find_aliases() to deal with alias nodes
> fdt: Add tests for fdtdec
> fdt: Tidy up a few fdtdec problems
> fdt: Add functions to access phandles, arrays and bools
> fdt: Add basic support for decoding GPIO definitions
> arm: fdt: Add skeleton device tree file from kernel
> tegra: fdt: Add Tegra2x device tree file from kernel
> tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel
> fdt: Add staging area for device tree binding documentation
> fdt: Add tegra-usb bindings file from linux
> tegra: fdt: Add additional USB binding
> tegra: fdt: Add clock bindings
> tegra: fdt: Add clock bindings for Tegra2 Seaboard
> tegra: usb: fdt: Add additional device tree definitions for USB ports
> tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard
> usb: Add support for txfifo threshold
> tegra: fdt: Add function to return peripheral/clock ID
> tegra: usb: Add support for Tegra USB peripheral
> fdt: Avoid early panic() when there is no FDT present
> arm: Check for valid FDT after console is up
> tegra: usb: Add USB support to nvidia boards
> tegra: usb: Add common USB defines for tegra2 boards
> tegra: usb: Enable USB on Seaboard
> tegra: fdt: Enable FDT support for Seaboard
> tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE
> fdt: Add function to allow aliases to refer to multiple nodes
> tegra: Enhance clock support to handle 16-bit clock divisors
> tegra: i2c: Initialise I2C on Nvidia boards
> tegra: i2c: Select number of controllers for Tegra2 boards
> tegra: i2c: Enable I2C on Seaboard
> tegra: i2c: Select I2C ordering for Seaboard
> tegra: fdt: i2c: Add extra I2C bindings for U-Boot
> Allow arch directory to contain .lds without requiring Makefile
> arm: Remove zipitz2 link script
> Define CPUDIR for the .lds link script
> arm: Remove unneeded setting of LDCSRIPT
> arm: add a common .lds link script
> arm: Use common .lds file where possible
>
> Simon Schwarz (8):
> Add cmd_spl command
> devkit8000: add config for spl command
> omap-common: Add NAND SPL linux booting
> devkit8000/spl: init GPMC for dm9000 in SPL
> omap-common/spl: Add linux boot to SPL
> omap/spl: change output of spl_parse_image_header
> devkit8000: Implement and activate direct OS boot
> arm: Add Prep subcommand support to bootm
>
> Stefano Babic (8):
> Add cache functions to SPL for armv7
> OMAP3: SPL: do not call I2C init if no I2C is set.
> SPL: call cleanup_before_linux() before booting Linux
> OMAP3: twister: add support to boot Linux from SPL
> NAND: TI: fix warnings in omap_gpmc.c
> OMAP3: mt_ventoux: updated timing for FPGA
> OMAP3: mt_ventoux: sets its own mtdparts
> Davinci: ea20: use gpio framework to access gpios
>
> Tom Rini (9):
> .gitignore: Add .su files
> config.mk: Make cc-option create a file under include/generated
> config.mk: Check for -fstack-usage support
> spl.c: Use __noreturn decorator
> README: document more SPL config options
> SPL: Add README.omap3
> cam_enc_4xx: Rename 'images' to 'imgs'
> sdrc.c: Fix typo in do_sdrc_init() for SPL
> OMAP: Remove omap1610inn-based boards
>
> Tom Warren (2):
> arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer
> load
> tegra: fdt: Enable FDT support for Ventana
>
> Vasily Khoruzhick (2):
> zipitz2: fix boot issue introduced by PXA low level init rework
> zipitz2: use pxa_mmc_gen as MMC driver
>
> Wolfgang Grandegger (2):
> usb/ehci: Add USB support for the MX6Q
> mx6qsabrelite: add and enable USB Host 1 support
>
> Yen Lin (1):
> tegra: i2c: Add I2C driver
>
> jacopo mondi (1):
> omap3_spi: receive transmit mode
>
> .gitignore | 1 +
> MAINTAINERS | 1 -
> Makefile | 25 +-
> README | 72 +++-
> arch/arm/config.mk | 7 -
> arch/arm/cpu/arm1136/mx31/generic.c | 2 +
> arch/arm/cpu/arm1136/u-boot.lds | 89 ---
> arch/arm/cpu/arm1176/u-boot.lds | 78 ---
> arch/arm/cpu/arm720t/u-boot.lds | 79 ---
> arch/arm/cpu/arm920t/s3c24x0/timer.c | 64 +--
> arch/arm/cpu/arm920t/u-boot.lds | 88 ---
> arch/arm/cpu/arm925t/u-boot.lds | 83 ---
> arch/arm/cpu/arm926ejs/cache.c | 66 ++-
> arch/arm/cpu/arm926ejs/mx28/clock.c | 74 +--
> arch/arm/cpu/arm926ejs/mx28/iomux.c | 6 +-
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 24 +-
> arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 130 +++---
> arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 8 +-
> arch/arm/cpu/arm926ejs/nomadik/timer.c | 10 +
> arch/arm/cpu/arm926ejs/u-boot.lds | 80 ---
> arch/arm/cpu/arm946es/u-boot.lds | 80 ---
> arch/arm/cpu/arm_intcm/u-boot.lds | 80 ---
> arch/arm/cpu/armv7/Makefile | 2 -
> arch/arm/cpu/armv7/cpu.c | 2 +
> arch/arm/cpu/armv7/highbank/Makefile | 2 +-
> arch/arm/cpu/armv7/highbank/bootcount.c | 36 ++
> arch/arm/cpu/armv7/highbank/config.mk | 1 +
> arch/arm/cpu/armv7/highbank/timer.c | 9 +-
> arch/arm/cpu/armv7/imx-common/cpu.c | 25 +-
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 20 +-
> arch/arm/cpu/armv7/mx6/clock.c | 13 +
> arch/arm/cpu/armv7/mx6/soc.c | 8 +-
> arch/arm/cpu/armv7/omap-common/Makefile | 3 +
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 4 +-
> arch/arm/cpu/armv7/omap-common/spl.c | 56 ++-
> arch/arm/cpu/armv7/omap-common/spl_nand.c | 47 ++-
> arch/arm/cpu/armv7/omap-common/spl_ymodem.c | 76 +++
> arch/arm/cpu/armv7/omap3/board.c | 2 +
> arch/arm/cpu/armv7/omap3/sdrc.c | 2 +-
> arch/arm/cpu/armv7/tegra2/Makefile | 4 +-
> arch/arm/cpu/armv7/tegra2/ap20.c | 20 +-
> arch/arm/cpu/armv7/tegra2/board.c | 2 +-
> arch/arm/cpu/armv7/tegra2/clock.c | 121 ++++-
> arch/arm/cpu/armv7/tegra2/config.mk | 2 +
> arch/arm/cpu/armv7/tegra2/usb.c | 460 ++++++++++++++++
> arch/arm/cpu/ixp/config.mk | 3 +
> arch/arm/cpu/ixp/npe/IxEthAcc.c | 2 +-
> arch/arm/cpu/ixp/npe/IxEthDBAPISupport.c | 3 -
> arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c | 3 -
> arch/arm/cpu/lh7a40x/u-boot.lds | 80 ---
> arch/arm/cpu/pxa/timer.c | 5 +
> arch/arm/cpu/pxa/u-boot.lds | 86 ---
> arch/arm/cpu/s3c44b0/u-boot.lds | 80 ---
> arch/arm/cpu/sa1100/u-boot.lds | 83 ---
> arch/arm/cpu/{armv7 => }/u-boot.lds | 15 +-
> arch/arm/dts/skeleton.dtsi | 13 +
> arch/arm/dts/tegra20.dtsi | 196 +++++++
> arch/arm/include/asm/arch-exynos/dmc.h | 109 ++++
> arch/arm/include/asm/arch-ixp/ixp425.h | 10 +-
> arch/arm/include/asm/arch-mx28/imx-regs.h | 1 +
> arch/arm/include/asm/arch-mx28/regs-apbh.h | 254 +++++-----
> arch/arm/include/asm/arch-mx28/regs-bch.h | 42 +-
> arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 98 ++--
> arch/arm/include/asm/arch-mx28/regs-common.h | 28 +-
> arch/arm/include/asm/arch-mx28/regs-digctl.h | 155 ++++++
> arch/arm/include/asm/arch-mx28/regs-gpmi.h | 26 +-
> arch/arm/include/asm/arch-mx28/regs-i2c.h | 28 +-
> arch/arm/include/asm/arch-mx28/regs-ocotp.h | 86 ++--
> arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 168 +++---
> arch/arm/include/asm/arch-mx28/regs-power.h | 28 +-
> arch/arm/include/asm/arch-mx28/regs-rtc.h | 28 +-
> arch/arm/include/asm/arch-mx28/regs-ssp.h | 40 +-
> arch/arm/include/asm/arch-mx28/regs-timrot.h | 38 +-
> arch/arm/include/asm/arch-mx28/regs-usbphy.h | 20 +-
> arch/arm/include/asm/arch-mx28/sys_proto.h | 10 +-
> arch/arm/include/asm/arch-mx6/clock.h | 1 +
> arch/arm/include/asm/arch-mx6/imx-regs.h | 146 +++++-
> arch/arm/include/asm/arch-tegra2/clk_rst.h | 10 +-
> arch/arm/include/asm/arch-tegra2/clock.h | 13 +
> arch/arm/include/asm/arch-tegra2/tegra2.h | 6 +-
> arch/arm/include/asm/arch-tegra2/tegra_i2c.h | 157 ++++++
> arch/arm/include/asm/arch-tegra2/usb.h | 252 +++++++++
> arch/arm/include/asm/bootm.h | 26 +
> arch/arm/include/asm/omap_common.h | 5 +
> arch/arm/lib/Makefile | 5 +-
> arch/arm/lib/board.c | 8 +
> arch/arm/lib/bootm.c | 349 ++++++------
> board/actux1/actux1.c | 2 -
> board/actux2/actux2.c | 2 -
> board/actux3/actux3.c | 2 -
> board/actux4/actux4.c | 2 -
> board/ait/cam_enc_4xx/cam_enc_4xx.c | 103 +++--
> board/ait/cam_enc_4xx/config.mk | 7 +
> board/ait/cam_enc_4xx/u-boot-spl.lds | 2 +-
> board/davinci/ea20/ea20.c | 38 +-
> board/denx/m28evk/spl_boot.c | 16 +-
> board/dvlhost/dvlhost.c | 2 -
> board/egnite/ethernut5/ethernut5.c | 1 +
> board/emk/top9000/top9000.c | 1 +
> board/enbw/enbw_cmc/enbw_cmc.c | 2 +-
> board/freescale/mx53ard/mx53ard.c | 2 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 31 +-
> board/highbank/highbank.c | 23 +
> board/nvidia/common/board.c | 19 +
> board/nvidia/common/board.h | 6 +
> board/nvidia/dts/tegra2-seaboard.dts | 92 ++++
> board/nvidia/seaboard/seaboard.c | 6 +
> board/omicron/calimain/calimain.c | 2 +-
> board/prodrive/pdnb3/nand.c | 16 +-
> board/prodrive/pdnb3/pdnb3.c | 3 -
> board/samsung/smdk5250/smdk5250.c | 44 ++-
> board/technexion/twister/twister.c | 23 +
> board/teejet/mt_ventoux/mt_ventoux.h | 11 +-
> board/ti/beagle/beagle.c | 3 +-
> board/ti/omap1610inn/Makefile | 45 --
> board/ti/omap1610inn/config.mk | 26 -
> board/ti/omap1610inn/flash.c | 495
> -----------------
> board/ti/omap1610inn/lowlevel_init.S | 452 ----------------
> board/ti/omap1610inn/omap1610innovator.c | 309 -----------
> board/timll/devkit8000/devkit8000.c | 37 ++
> board/vpac270/onenand.c | 3 -
> board/zipitz2/zipitz2.c | 9 +
> boards.cfg | 10 +-
> common/Makefile | 4 +
> common/cmd_spl.c | 188 +++++++
> config.mk | 11 +-
> doc/README.PXA_CF | 56 --
> doc/README.commands.spl | 31 ++
> doc/README.mx6qsabrelite | 12 +-
> doc/SPL/README.omap3 | 74 +++
> doc/device-tree-bindings/README | 17 +
> .../clock/nvidia,tegra20-car.txt | 207 +++++++
> doc/device-tree-bindings/i2c/tegra20-i2c.txt | 23 +
> doc/device-tree-bindings/usb/tegra-usb.txt | 25 +
> drivers/dma/apbh_dma.c | 23 +-
> drivers/gpio/mxs_gpio.c | 16 +-
> drivers/i2c/Makefile | 1 +
> drivers/i2c/tegra_i2c.c | 569
> ++++++++++++++++++++
> drivers/misc/pmic_i2c.c | 6 +
> drivers/mmc/mmc.c | 102 ++++-
> drivers/mmc/mxsmmc.c | 70 ++-
> drivers/mtd/nand/mxs_nand.c | 53 ++-
> drivers/mtd/nand/omap_gpmc.c | 14 +-
> drivers/net/calxedaxgmac.c | 1 +
> drivers/net/fec_mxc.c | 277 +++++++---
> drivers/net/fec_mxc.h | 19 +-
> drivers/pcmcia/Makefile | 1 -
> drivers/pcmcia/pxa_pcmcia.c | 93 ----
> drivers/power/twl4030.c | 18 +-
> drivers/spi/mxs_spi.c | 6 +-
> drivers/spi/omap3_spi.c | 66 +++-
> drivers/spi/omap3_spi.h | 2 +
> drivers/usb/host/Makefile | 2 +
> drivers/usb/host/ehci-hcd.c | 7 +
> drivers/usb/host/ehci-mx6.c | 200 +++++++
> drivers/usb/host/ehci-mxs.c | 8 +-
> .../u-boot.lds => drivers/usb/host/ehci-tegra.c | 62 ++-
> drivers/usb/host/ehci.h | 6 +-
> examples/standalone/Makefile | 2 +-
> board/zipitz2/u-boot.lds => include/cmd_spl.h | 43 +--
> include/configs/actux1.h | 2 +
> include/configs/actux2.h | 2 +
> include/configs/actux3.h | 2 +
> include/configs/actux4.h | 2 +
> include/configs/am335x_evm.h | 1 +
> include/configs/cam_enc_4xx.h | 13 +-
> include/configs/devkit8000.h | 15 +-
> include/configs/dvlhost.h | 2 +
> include/configs/ea20.h | 2 +
> include/configs/efikamx.h | 4 +-
> include/configs/highbank.h | 21 +-
> include/configs/m28evk.h | 3 +-
> include/configs/mt_ventoux.h | 10 +
> include/configs/mx28evk.h | 3 +
> include/configs/mx31pdk.h | 2 +-
> include/configs/mx51evk.h | 2 +-
> include/configs/mx53evk.h | 2 +-
> include/configs/mx53smd.h | 2 +-
> include/configs/mx6qsabrelite.h | 17 +
> include/configs/omap1610h2.h | 197 -------
> include/configs/omap1610inn.h | 202 -------
> include/configs/pdnb3.h | 2 +
> include/configs/seaboard.h | 20 +
> include/configs/tegra2-common.h | 13 +
> include/configs/twister.h | 12 +
> include/configs/ventana.h | 5 +
> include/configs/vision2.h | 2 +-
> include/configs/zipitz2.h | 14 +-
> include/fdtdec.h | 197 +++++++-
> include/image.h | 2 +
> include/net.h | 3 +-
> include/pcmcia.h | 3 +-
> lib/Makefile | 4 +
> lib/fdtdec.c | 323 +++++++++++-
> lib/fdtdec_test.c | 226 ++++++++
> spl/Makefile | 4 +
> tools/imximage.c | 18 +-
> tools/imximage.h | 1 +
> 198 files changed, 6109 insertions(+), 4188 deletions(-)
> delete mode 100644 arch/arm/cpu/arm1136/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm1176/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm720t/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm920t/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm925t/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm926ejs/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm946es/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm_intcm/u-boot.lds
> create mode 100644 arch/arm/cpu/armv7/highbank/bootcount.c
> create mode 100644 arch/arm/cpu/armv7/highbank/config.mk
> create mode 100644 arch/arm/cpu/armv7/omap-common/spl_ymodem.c
> create mode 100644 arch/arm/cpu/armv7/tegra2/usb.c
> delete mode 100644 arch/arm/cpu/lh7a40x/u-boot.lds
> delete mode 100644 arch/arm/cpu/pxa/u-boot.lds
> delete mode 100644 arch/arm/cpu/s3c44b0/u-boot.lds
> delete mode 100644 arch/arm/cpu/sa1100/u-boot.lds
> rename arch/arm/cpu/{armv7 => }/u-boot.lds (88%)
> create mode 100644 arch/arm/dts/skeleton.dtsi
> create mode 100644 arch/arm/dts/tegra20.dtsi
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-digctl.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/tegra_i2c.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/usb.h
> create mode 100644 arch/arm/include/asm/bootm.h
> create mode 100644 board/nvidia/dts/tegra2-seaboard.dts
> delete mode 100644 board/ti/omap1610inn/Makefile
> delete mode 100644 board/ti/omap1610inn/config.mk
> delete mode 100644 board/ti/omap1610inn/flash.c
> delete mode 100644 board/ti/omap1610inn/lowlevel_init.S
> delete mode 100644 board/ti/omap1610inn/omap1610innovator.c
> create mode 100644 common/cmd_spl.c
> delete mode 100644 doc/README.PXA_CF
> create mode 100644 doc/README.commands.spl
> create mode 100644 doc/SPL/README.omap3
> create mode 100644 doc/device-tree-bindings/README
> create mode 100644 doc/device-tree-bindings/clock/nvidia,tegra20-car.txt
> create mode 100644 doc/device-tree-bindings/i2c/tegra20-i2c.txt
> create mode 100644 doc/device-tree-bindings/usb/tegra-usb.txt
> create mode 100644 drivers/i2c/tegra_i2c.c
> delete mode 100644 drivers/pcmcia/pxa_pcmcia.c
> create mode 100644 drivers/usb/host/ehci-mx6.c
> rename board/jornada/u-boot.lds => drivers/usb/host/ehci-tegra.c (53%)
> rename board/zipitz2/u-boot.lds => include/cmd_spl.h (56%)
> delete mode 100644 include/configs/omap1610h2.h
> delete mode 100644 include/configs/omap1610inn.h
> create mode 100644 lib/fdtdec_test.c
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There are bugs and then there are bugs. And then there are bugs.
- Karl Lehenbauer
next prev parent reply other threads:[~2012-03-30 17:58 UTC|newest]
Thread overview: 259+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-30 7:10 [U-Boot] Pull request: u-boot-arm/master Albert ARIBAUD
2012-03-30 17:58 ` Wolfgang Denk [this message]
-- strict thread matches above, loose matches on Subject: below --
2016-01-31 20:40 Albert ARIBAUD
2016-02-01 16:54 ` Tom Rini
2015-11-10 17:45 Albert ARIBAUD
2015-11-10 20:15 ` Tom Rini
2015-10-15 21:19 Albert ARIBAUD
2015-10-15 22:00 ` Tom Rini
2015-07-31 1:06 Albert ARIBAUD
2015-08-01 14:47 ` Tom Rini
2015-07-06 15:20 Albert ARIBAUD
2015-07-06 21:15 ` Tom Rini
2015-07-06 22:09 ` Albert ARIBAUD
2015-07-06 23:59 ` Tom Rini
2015-07-07 5:49 ` Albert ARIBAUD
2015-07-07 10:01 ` Albert ARIBAUD
2015-07-02 21:27 Albert ARIBAUD
2015-07-02 22:55 ` Tom Rini
2015-07-05 14:11 ` Albert ARIBAUD
2015-05-05 9:30 Albert ARIBAUD
2015-05-05 23:59 ` Tom Rini
2015-01-04 18:11 Albert ARIBAUD
2015-01-05 15:10 ` Tom Rini
2014-11-24 17:30 Albert ARIBAUD
2014-11-24 22:13 ` Tom Rini
2014-11-13 7:54 Albert ARIBAUD
2014-11-08 0:07 Albert ARIBAUD
2014-11-10 21:28 ` Tom Rini
2014-10-11 0:38 Albert ARIBAUD
2014-10-11 11:49 ` Tom Rini
2014-10-07 11:16 Albert ARIBAUD
2014-10-07 16:02 ` Tom Rini
2014-09-17 21:40 Albert ARIBAUD
2014-09-18 1:00 ` Tom Rini
2014-09-12 13:42 Albert ARIBAUD
2014-09-12 19:15 ` Tom Rini
2014-07-29 13:08 Albert ARIBAUD
2014-07-29 14:30 ` Tom Rini
2014-07-05 8:18 Albert ARIBAUD
2014-07-05 16:48 ` Tom Rini
2014-07-04 22:57 Albert ARIBAUD
2014-07-05 0:20 ` Tom Rini
2014-07-02 20:33 Albert ARIBAUD
2014-07-02 22:38 ` Tom Rini
2014-06-08 7:51 Albert ARIBAUD
2014-06-09 2:25 ` Tom Rini
2014-05-30 15:20 Albert ARIBAUD
2014-05-30 17:59 ` Tom Rini
2014-05-24 9:32 Albert ARIBAUD
2014-05-24 20:37 ` Tom Rini
2014-05-20 8:57 Albert ARIBAUD
2014-05-22 19:12 ` Tom Rini
2014-05-09 9:56 Albert ARIBAUD
2014-05-09 16:15 ` Tom Rini
2014-04-08 11:40 Albert ARIBAUD
2014-04-08 16:39 ` Tom Rini
2014-03-10 18:16 Albert ARIBAUD
2014-03-10 21:27 ` Tom Rini
2014-02-26 21:40 Albert ARIBAUD
2014-02-26 23:39 ` Tom Rini
2014-02-13 17:43 Albert ARIBAUD
2014-02-18 17:50 ` Tom Rini
2014-02-18 18:21 ` Stephen Warren
2014-02-18 18:29 ` Tom Rini
2014-02-18 18:47 ` Albert ARIBAUD
2014-01-15 15:16 Albert ARIBAUD
2014-01-14 13:04 Albert ARIBAUD
2014-01-14 21:02 ` Tom Rini
2014-01-13 18:49 Albert ARIBAUD
2014-01-13 19:42 ` Tom Rini
2014-01-10 15:43 Albert ARIBAUD
2014-01-10 20:03 ` Tom Rini
2014-01-11 8:11 ` Albert ARIBAUD
2013-12-10 22:05 Albert ARIBAUD
2013-12-11 16:44 ` Tom Rini
2013-11-09 22:53 Albert ARIBAUD
2013-11-11 19:13 ` Tom Rini
2013-10-11 14:33 Albert ARIBAUD
2013-10-14 15:20 ` Tom Rini
2013-10-07 20:02 Albert ARIBAUD
2013-10-08 19:33 ` Tom Rini
2013-10-03 20:42 Albert ARIBAUD
2013-10-04 18:46 ` Tom Rini
2013-10-02 15:34 Albert ARIBAUD
2013-10-02 18:20 ` Tom Rini
2013-09-12 13:18 Albert ARIBAUD
2013-09-12 15:11 ` Tom Rini
2013-09-12 20:54 ` Albert ARIBAUD
2013-09-06 22:55 Albert ARIBAUD
2013-09-09 14:56 ` Tom Rini
2013-07-10 20:33 [U-Boot] pull " Albert ARIBAUD
2013-06-21 21:52 [U-Boot] Pull " Albert ARIBAUD
2013-06-24 20:17 ` Tom Rini
2013-06-13 15:49 Albert ARIBAUD
2013-06-14 15:11 ` Tom Rini
2013-06-05 15:02 [U-Boot] pull " Albert ARIBAUD
2013-06-07 18:20 ` Tom Rini
2013-05-30 19:29 [U-Boot] Pull " Albert ARIBAUD
2013-05-31 20:51 ` Tom Rini
2013-04-17 16:37 Albert ARIBAUD
2013-04-18 20:17 ` Tom Rini
2013-04-15 19:36 Albert ARIBAUD
2013-04-16 15:58 ` Tom Rini
2013-04-14 19:32 Albert ARIBAUD
2013-04-15 15:51 ` Tom Rini
2013-04-10 23:12 Albert ARIBAUD
2013-04-10 23:20 ` Benoît Thébaudeau
2013-04-11 6:10 ` Albert ARIBAUD
2013-03-28 20:06 Albert ARIBAUD
2013-03-29 0:01 ` Tom Rini
2013-03-15 22:01 Albert ARIBAUD
2013-03-16 8:19 ` Albert ARIBAUD
2013-03-17 19:40 ` Tom Rini
2013-03-18 17:06 ` Tom Rini
2013-03-18 17:43 ` Albert ARIBAUD
2013-03-18 18:38 ` Tom Rini
2013-02-12 14:25 Albert ARIBAUD
2013-02-15 16:33 ` Tom Rini
2013-01-14 16:58 Albert ARIBAUD
2013-01-14 23:18 ` Tom Rini
2013-01-11 21:36 Albert ARIBAUD
2013-01-11 23:44 ` Tom Rini
2013-01-09 14:43 Albert ARIBAUD
2013-01-09 19:35 ` Tom Rini
2013-01-08 15:07 Albert ARIBAUD
2013-01-08 20:50 ` Simon Glass
2013-01-08 21:01 ` Albert ARIBAUD
2013-01-08 21:06 ` Simon Glass
2013-01-08 22:34 ` Tom Rini
2012-12-22 12:11 Albert ARIBAUD
2012-12-22 15:20 ` Tom Rini
2013-01-03 6:41 ` Joonyoung Shim
2013-01-03 7:12 ` Lukasz Majewski
2012-11-04 21:51 Albert ARIBAUD
2012-11-05 16:54 ` Tom Rini
2012-11-05 19:45 ` Stephen Warren
2012-11-08 15:08 ` Tom Rini
2012-10-26 22:30 Albert ARIBAUD
2012-10-27 0:20 ` Tom Rini
2012-10-19 23:55 Albert ARIBAUD
2012-10-20 17:39 ` Tom Rini
2012-10-05 19:26 Albert ARIBAUD
2012-10-05 22:26 ` Tom Rini
2012-10-04 16:57 Albert ARIBAUD
2012-10-04 18:31 ` Tom Rini
2012-09-21 21:35 Albert ARIBAUD
2012-09-22 0:21 ` Tom Rini
2012-09-01 16:37 Albert ARIBAUD
2012-09-01 22:27 ` Wolfgang Denk
2012-07-10 6:30 Albert ARIBAUD
2012-07-10 7:04 ` Wolfgang Denk
2012-07-07 12:12 Albert ARIBAUD
2012-07-08 20:13 ` Wolfgang Denk
2012-05-15 6:57 Albert ARIBAUD
2012-05-20 20:33 ` Wolfgang Denk
2012-04-16 14:52 Albert ARIBAUD
2012-04-16 18:18 ` Marek Vasut
2012-04-16 20:09 ` Albert ARIBAUD
2012-04-16 20:15 ` Albert ARIBAUD
2012-04-17 5:33 ` Stefano Babic
2012-02-27 20:23 Albert ARIBAUD
2012-03-03 14:09 ` Wolfgang Denk
2012-02-12 9:16 Albert ARIBAUD
2012-02-12 21:06 ` Wolfgang Denk
2012-01-16 8:16 Albert ARIBAUD
2012-01-17 21:36 ` Wolfgang Denk
2011-12-24 9:27 Albert ARIBAUD
2012-01-05 15:53 ` Wolfgang Denk
2011-12-19 16:55 Albert ARIBAUD
2011-12-20 21:40 ` Wolfgang Denk
2011-12-11 13:38 Albert ARIBAUD
2011-12-12 6:58 ` Wolfgang Denk
2011-12-09 16:42 Albert ARIBAUD
2011-12-10 21:54 ` Wolfgang Denk
2011-12-06 23:17 Albert ARIBAUD
2011-12-07 10:16 ` Wolfgang Denk
2011-11-15 21:28 Albert ARIBAUD
2011-11-16 0:04 ` Simon Glass
2011-11-16 2:27 ` Marek Vasut
2011-11-16 3:45 ` Simon Glass
2011-11-16 3:53 ` Mike Frysinger
2011-11-16 4:05 ` Simon Glass
2011-11-16 19:24 ` Wolfgang Denk
2011-11-17 13:45 ` Albert ARIBAUD
2011-11-17 21:39 ` Mike Frysinger
2011-11-17 21:56 ` Wolfgang Denk
2011-11-17 22:03 ` Albert ARIBAUD
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF1740D74CB5@HQMAIL01.nvidia.com>
[not found] ` <7E91C59574E9954FA075F8D8CCDF78DB38FE7FF7A9@HQMAIL04.nvidia.com>
2011-11-17 22:04 ` Simon Glass
2011-11-16 6:28 ` Heiko Schocher
2011-11-16 19:42 ` Wolfgang Denk
2011-11-07 20:58 Albert ARIBAUD
2011-11-08 0:02 ` Wolfgang Denk
2011-09-30 20:09 Albert ARIBAUD
2011-10-01 19:40 ` Wolfgang Denk
2011-10-04 5:35 ` Simon Glass
2011-10-21 18:44 ` Albert ARIBAUD
2011-10-21 19:12 ` Simon Glass
2011-09-28 6:38 Albert ARIBAUD
2011-09-28 18:42 ` Wolfgang Denk
2011-09-22 21:03 Albert ARIBAUD
2011-09-23 6:29 ` Wolfgang Denk
2011-09-14 6:57 Albert ARIBAUD
2011-09-15 12:24 ` Wolfgang Denk
2011-08-31 10:13 Albert ARIBAUD
2011-08-31 11:57 ` Marek Vasut
2011-09-01 8:59 ` Aneesh V
2011-09-03 19:26 ` Albert ARIBAUD
2011-09-04 8:44 ` Aneesh V
2011-09-04 9:01 ` Albert ARIBAUD
2011-09-04 9:02 ` Aneesh V
2011-09-04 9:12 ` Albert ARIBAUD
2011-09-04 9:17 ` Aneesh V
2011-08-04 12:28 Albert ARIBAUD
2011-07-18 13:38 Albert ARIBAUD
2011-07-18 14:31 ` Igor Grinberg
2011-07-18 17:52 ` Albert ARIBAUD
2011-08-12 8:21 ` Albert ARIBAUD
2011-07-18 19:17 ` Wolfgang Denk
2011-07-04 9:08 Albert ARIBAUD
2011-07-04 22:32 ` Wolfgang Denk
2011-06-30 6:24 Albert ARIBAUD
2011-06-30 11:15 ` Albert ARIBAUD
2011-06-28 5:39 Albert ARIBAUD
2011-06-28 9:52 ` Igor Grinberg
2011-06-28 10:20 ` Igor Grinberg
2011-06-28 21:19 ` Albert ARIBAUD
2011-06-28 10:48 ` Wolfgang Denk
2011-06-29 6:09 ` Albert ARIBAUD
2011-06-29 21:09 ` Wolfgang Denk
2011-06-21 20:28 Albert ARIBAUD
2011-06-22 9:17 ` Wolfgang Denk
2011-06-22 12:18 ` Wolfgang Denk
2011-06-22 13:51 ` Albert ARIBAUD
2011-06-08 20:41 Albert ARIBAUD
2011-06-08 21:32 ` Wolfgang Denk
2011-05-31 20:31 Albert ARIBAUD
2011-05-31 22:29 ` John Rigby
2011-06-01 17:15 ` Albert ARIBAUD
2011-06-01 20:15 ` Wolfgang Denk
2011-05-11 21:07 Albert ARIBAUD
2011-05-11 22:11 ` Rogan Dawes
2011-05-12 5:41 ` Albert ARIBAUD
2011-05-12 8:48 ` Prafulla Wadaskar
2011-05-12 9:06 ` Simon Guinot
2011-05-12 9:12 ` Simon Guinot
2011-05-12 17:27 ` Wolfgang Denk
2011-05-14 18:38 ` Dirk Behme
2011-04-28 16:14 Albert ARIBAUD
2011-04-28 21:17 ` Wolfgang Denk
2011-04-27 17:40 Albert ARIBAUD
2011-04-27 20:16 ` Wolfgang Denk
2011-04-27 23:42 ` Macpaul Lin
2011-04-28 21:14 ` Wolfgang Denk
2011-04-29 1:31 ` Macpaul Lin
2011-04-30 20:44 ` Wolfgang Denk
2011-05-02 8:46 ` Macpaul Lin
2011-05-02 10:31 ` Wolfgang Denk
2011-03-27 17:25 Albert ARIBAUD
2011-03-27 19:32 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120330175802.B4941200247@gemini.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.