[U-Boot] Pull request: u-boot-arm/master

[Tom Rini <trini@ti.com>]

On Tue, May 20, 2014 at 10:57:08AM +0200, Albert ARIBAUD wrote:

> Hello Tom,
> 
> The following changes since commit
> d7782d06534fe4fa47a49fa7c106de5ba85a9687:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-05-16
>   18:30:33 -0400)
> 
> are available in the git repository at:
> 
> 
>   git://git.denx.de/u-boot-arm master
> 
> for you to fetch changes up to 05d134b084590684bcf4d832c0035952727b7cd9:
> 
>   Merge remote-tracking branch 'u-boot/master' (2014-05-20 10:05:42
>   +0200)
> 
> Note: there still is a Zynq PR pending right now, but I wanted
> to get re-synchronized with mainline first; a further PR with Zynq
> and individual patches will arrive soon.
> 
> ----------------------------------------------------------------
> 
> Akshay Saraswat (3):
>       Exynos5: config: Enable FIT
>       S5P: Exynos: Add GPIO pin numbering and rename definitions
>       S5P: Exynos: Config: Enable GPIO CMD config
> 
> Albert ARIBAUD (12):
>       arm1136: move cache code from start.S to cache.c
>       arm: move reset_cpu from start.S into cpu.c
>       arm: pxa: move SP check from start.S to cpuinfo.c
>       arm: remove unused _end_vect and _vectors_end symbols
>       arm: move exception handling out of start.S files
>       Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
>       Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
>       Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
>       Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
>       Merge remote-tracking branch 'u-boot-sh/rmobile'
>       boards.cfg: reformat
>       Merge remote-tracking branch 'u-boot/master'
> 
> Ash Charles (1):
>       am335x: pepper: Add Gumstix Pepper AM335x-based machine
> 
> Belisko Marek (1):
>       mtd: nand: omap_gpmc: Fix update of read_ecc in oob
> 
> Christian Riesch (1):
>       arm, davinci: Use CONFIG_SPL_PAD_TO for padding the SPL in an ais
> image
> 
> Dmitry Lifshitz (3):
>       ARM: OMAP5: add UART4 support
>       ARM: OMAP5: Power: add LDO2 support for Palmas driver
>       ARM: OMAP5: add CKO buffer control mask
> 
> Egli, Samuel (7):
>       siemens: cosmetic: remove unused and rename defines
>       siemens: update DDR3 parameters for dxr2
>       siemens: add led cmd for flexible LED control
>       siemens: change LED indication in DFU mode
>       siemens: cosmetic: rename project_dir
>       siemens:cosmetic, dxr2: rename dxr2 to draco
>       siemens, draco: add new target
> 
> Eric Benard (8):
>       imx-common: add board_video_skip
>       nitrogen6x: use common board_video_skip
>       mx6sabresd: use common board_video_skip
>       RiOTboard and MarSBoard: add new boards support
>       imx-common/video: add detect_hdmi
>       nitrogen6x: use common detect_hdmi
>       mx6sabresd: use common detect_hdmi
>       embest/mx6boards: use common detect_hdmi
> 
> Eric Nelson (1):
>       ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD
> 
> Fabio Estevam (11):
>       wandboard: Convert to generic board
>       mx53loco: Convert to generic board
>       mx6sabre_common: Convert to generic board
>       mx53ard: Convert to generic board
>       mx53smd: Convert to generic board
>       mx53evk: Convert to generic board
>       udoo: Convert to generic board
>       hummingboard: Convert to generic board
>       mx6slevk: Add SPI NOR flash support
>       nitrogen6x: Fix the PAD settings for the ECSPI chipselect
>       iomux-v3: Add support for mx6sl LVE bit
> 
> Inha Song (1):
>       samsung: misc: add env default option to lcd menu
> 
> Jaehoon Chung (1):
>       ARM: exynos: remove the unused code
> 
> Khoronzhuk, Ivan (1):
>       config: k2hk_evm: Add generic board support
> 
> Marek Vasut (1):
>       arm: mxs: Enable CONFIG_SYS_GENERIC_BOARD
> 
> Mateusz Zalega (1):
>       ARM: Samsung: s5p_goni: maintainer update
> 
> Nobuhiro Iwamatsu (22):
>       arm: rmobile: Coordinate the common part of the header file of
> r8a7790 and r8a7791 arm: rmobile: r8a779x: Fix L2 cache init and
> latency setting arm: rmobile: koelsch: Change name of structure
>       arm: rmobile: koelsch: Remove NOR-Flash support
>       arm: rmobile: lager: Change name of the structure
>       arm: rmobile: lager: Remove NOR-Flash support
>       arm: rmobile: Merge functions to get the CPU information of
> R8A7790 and R8A7791 arm: rmobile: Add 1 to value of the CPU revision in
> rmobile_get_cpu_rev_integer() arm: rmobile: Add
> rmobile_get_cpu_rev_fraction() for R-Car SoCs arm: rmobile: Add
> prototype for function to get the CPU information to rmobile.h arm:
> rmobile: Update print_cpuinfo function arm: rmobile: r8a7790: Add
> support ES2 revision arm: rmobile: r8a7791: Add support ES2 revision
>       arm: rmobile: keolsch: Add support ES2 revision of R8A7791
>       arm: rmobile: lager: Update QoS initialization to version 0.955
>       arm: rmobile: koelsch: Update QoS initialization
>       arm: rmobile: koelsch: Update calculation of
> CONFIG_SH_TMU_CLK_FREQ arm: rmobile: Add register infomation of PLL
> regsiter arm: rmobile: koelsch: Change to maximum CPU frequency
>       arm: rmobile: lager: Update calculation of CONFIG_SH_TMU_CLK_FREQ
>       arm: rmobile: lager: Change to maximum CPU frequency
>       arm: rmobile: lager: Remove MACH_TYPE_LAGER and CONFIG_MACH_TYPE
> 
> Otavio Salvador (2):
>       wandboard: add Future Eletronics 7" WVGA LCD extension board
>       wandboard: Pass video kernel arguments for HDMI and LCD
> 
> Przemyslaw Marczak (4):
>       samsung: misc: allows using environmental macros as args in menu
> commands samsung: misc: add gpt restore option to lcd menu
>       samsung: misc: menu: increase delay in menu main loop
>       samsung: misc: remove download mode info screen
> 
> Robert Nelson (2):
>       omap3_beagle: use omap3-beagle-xm-ab.dtb for the xM AB revision
>       omap3_beagle: xM A/B validate new dtb exits in file system
> 
> Stefano Babic (3):
>       mx6: fix weird formatting in imx6q-sabreauto.dts
>       Merge branch 'master' of git://git.denx.de/u-boot-arm
>       Merge branch 'master' of git://git.denx.de/u-boot-arm
> 
> Stephen Warren (10):
>       ARM: tegra: set CONFIG_SYS_MMC_MAX_DEVICE
>       ARM: tegra: fix CPU VDD comment in Tegra30 CPU init code
>       ARM: tegra: allow pinmux mux option not to be set by init tables
>       ARM: tegra: add GPIO initialization table function
>       ARM: tegra: add function to enable input clamping on tristate
>       ARM: tegra: make use of GPIO init table on Jetson TK1
>       ARM: tegra: clamp inputs on Jetson TK1
>       ARM: tegra: update Venice2 pinmux
>       ARM: tegra: Venice2 pinmux spreadsheet updates
>       ARM: tegra: use a CPU freq that all SKUs can support
> 
> Thomas Diener (2):
>       imx25: Add new hardware registers
>       video: Add support for imx25 lcd controller
> 
> Tim Harvey (10):
>       ventana: fixed comments in eeprom header
>       ventana: remove redundant include
>       power: make pfuze100 be able to coexist with other pmics
>       ventana: use non-generic pfuze100 init
>       power: Add support for LTC3676 PMIC
>       ventana: Add support for the LTC3676 PMIC
>       imx6: ventana: fix system-serial dt property
>       imx: ventana: Convert to generic board
>       imx: ventana: add HDMI and LVDS display capability
>       nand: remove CONFIG_SYS_NAND_PAGE_SIZE
> 
> Yegor Yefremov (1):
>       am33xx: add SSC enable macro
> 
> ?ukasz Majewski (2):
>       trats2: config: fix: Set default console to ttySAC2
>       trats: config: fix: Set default console to ttySAC2
> 
>  Makefile
>  |    2 +-
>  arch/arm/cpu/arm1136/start.S                                       |
>  254 +-------------
>  arch/arm/cpu/arm1176/start.S                                       |
>  198 +----------
>  arch/arm/cpu/arm720t/start.S                                       |
>  229 +------------
>  arch/arm/cpu/arm720t/tegra-common/cpu.c                            |
>  10 +-
>  arch/arm/cpu/arm720t/tegra30/cpu.c                                 |
>  23 +-
>  arch/arm/cpu/arm920t/ep93xx/u-boot.lds
>  |    3 +-
>  arch/arm/cpu/arm920t/start.S                                       |
>  216 +-----------
>  arch/arm/cpu/arm926ejs/mxs/start.S                                 |
>  92 +-----
>  arch/arm/cpu/arm926ejs/spear/start.S                               |
>  27 +-
>  arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
>  |    1 +
>  arch/arm/cpu/arm926ejs/start.S                                     |
>  262 +--------------
>  arch/arm/cpu/arm946es/cpu.c                                        |
>  13 +
>  arch/arm/cpu/arm946es/start.S                                      |
>  246 +-------------
>  arch/arm/cpu/arm_intcm/start.S                                     |
>  228 +------------
>  arch/arm/cpu/armv7/exynos/pinmux.c                                 |
>  561 +++++++++++++++++--------------
>  arch/arm/cpu/armv7/rmobile/Makefile
>  |    4 +-
>  arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c                      |
>  29 -- arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>
>  cpu_info-rcar.c} |   12 +-
>  arch/arm/cpu/armv7/rmobile/cpu_info.c                              |
>  49 ++-
>  arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S                    |
>  20 +-
>  arch/arm/cpu/armv7/socfpga/lowlevel_init.S                         |
>  15 +-
>  arch/arm/cpu/armv7/start.S                                         |
>  253 +-------------
>  arch/arm/cpu/armv7/zynq/u-boot.lds
>  |    2 +-
>  arch/arm/cpu/pxa/cpuinfo.c
>  |    6 +
>  arch/arm/cpu/pxa/start.S                                           |
>  253 +-------------
>  arch/arm/cpu/sa1100/cpu.c                                          |
>  14 +
>  arch/arm/cpu/sa1100/start.S                                        |
>  225 +------------
>  arch/arm/cpu/tegra-common/pinmux-common.c                          |
>  19 ++
>  arch/arm/cpu/u-boot-spl.lds
>  |    1 +
>  arch/arm/cpu/u-boot.lds
>  |    1 +
>  arch/arm/dts/exynos4210-origen.dts
>  |    4 +-
>  arch/arm/dts/exynos4210-trats.dts
>  |    6 +-
>  arch/arm/dts/exynos4210-universal_c210.dts
>  |    4 +-
>  arch/arm/dts/exynos4412-trats2.dts
>  |    4 +-
>  arch/arm/dts/imx6q-sabreauto.dts                                   |
>  10 +-
>  arch/arm/imx-common/Makefile
>  |    1 +
>  arch/arm/imx-common/iomux-v3.c
>  |    8 +
>  arch/arm/imx-common/video.c                                        |
>  65 ++++
>  arch/arm/include/asm/arch-am33xx/clock.h
>  |    2 +
>  arch/arm/include/asm/arch-exynos/cpu.h                             |
>  17 +-
>  arch/arm/include/asm/arch-exynos/gpio.h                            |
>  1761
>  +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------
>  arch/arm/include/asm/arch-mx25/imx-regs.h                          |
>  175 ++++++++++
>  arch/arm/include/asm/arch-mx6/mx6sl_pins.h
>  |    4 +
>  arch/arm/include/asm/arch-omap5/clock.h
>  |    3 +
>  arch/arm/include/asm/arch-omap5/omap.h
>  |    1 +
>  arch/arm/include/asm/arch-rmobile/r8a7790.h                        |
>  609 +---------------------------------
>  arch/arm/include/asm/arch-rmobile/r8a7791.h                        |
>  626 +----------------------------------
>  arch/arm/include/asm/arch-rmobile/rcar-base.h                      |
>  637 +++++++++++++++++++++++++++++++++++
>  arch/arm/include/asm/arch-rmobile/rmobile.h
>  |    6 +
>  arch/arm/include/asm/arch-s5pc1xx/gpio.h                           |
>  948 ++++++++++++++++++++++++++++++++++++++++++++--------
>  arch/arm/include/asm/arch-tegra/gpio.h                             |
>  20 ++
>  arch/arm/include/asm/arch-tegra/pinmux.h
>  |    5 +
>  arch/arm/include/asm/arch-tegra/tegra_mmc.h
>  |    2 -
>  arch/arm/include/asm/arch-tegra114/pinmux.h
>  |    1 +
>  arch/arm/include/asm/arch-tegra124/pinmux.h
>  |    1 +
>  arch/arm/include/asm/arch-tegra20/pinmux.h
>  |    1 +
>  arch/arm/include/asm/arch-tegra30/pinmux.h
>  |    1 +
>  arch/arm/include/asm/imx-common/iomux-v3.h
>  |    5 +
>  arch/arm/include/asm/imx-common/video.h                            |
>  24 ++
>  arch/arm/lib/Makefile
>  |    2 +-
>  arch/arm/lib/cache.c                                               |
>  13 +-
>  arch/arm/lib/vectors.S                                             |
>  291 ++++++++++++++++
>  board/boundary/nitrogen6x/nitrogen6x.c                             |
>  69 +---
>  board/compulab/cm_t335/u-boot.lds
>  |    1 +
>  board/embest/mx6boards/Makefile
>  |    9 +
>  board/embest/mx6boards/mx6boards.c                                 |
>  601 +++++++++++++++++++++++++++++++++
>  board/freescale/mx31ads/u-boot.lds
>  |    1 +
>  board/freescale/mx6sabresd/mx6sabresd.c                            |
>  67 +---
>  board/freescale/mx6slevk/mx6slevk.c                                |
>  20 ++
>  board/gateworks/gw_ventana/gw_ventana.c                            |
>  215 ++++++++++--
>  board/gateworks/gw_ventana/ventana_eeprom.h                        |
>  14 +-
>  board/gumstix/pepper/Makefile                                      |
>  13 +
>  board/gumstix/pepper/board.c                                       |
>  226 +++++++++++++
>  board/gumstix/pepper/board.h                                       |
>  19 ++
>  board/gumstix/pepper/mux.c                                         |
>  78 +++++
>  board/nvidia/jetson-tk1/jetson-tk1.c
>  |    6 +
>  board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h                 |
>  256 +++++++++-----
>  board/nvidia/venice2/pinmux-config-venice2.h                       |
>  567 +++++++++++++++----------------
>  board/nvidia/venice2/venice2.c                                     |
>  19 +-
>  board/renesas/koelsch/koelsch.c                                    |
>  194 +----------
>  board/renesas/koelsch/qos.c                                        |
>  404 ++++++++++++++---------
>  board/renesas/lager/lager.c                                        |
>  196 +----------
>  board/renesas/lager/qos.c                                          |
>  236 ++++++-------
>  board/samsung/arndale/arndale.c                                    |
>  11 +-
>  board/samsung/common/misc.c                                        |
>  130 ++++----
>  board/samsung/goni/goni.c                                          |
>  32 +-
>  board/samsung/smdk5250/exynos5-dt.c                                |
>  20 +-
>  board/samsung/smdk5250/smdk5250.c                                  |
>  19 +-
>  board/samsung/smdk5420/smdk5420.c                                  |
>  15 +-
>  board/samsung/smdkc100/smdkc100.c
>  |    5 +-
>  board/samsung/smdkv310/smdkv310.c                                  |
>  19 +-
>  board/samsung/trats/trats.c                                        |
>  39 +--
>  board/samsung/trats2/trats2.c                                      |
>  74 ++---
>  board/samsung/universal_c210/universal.c                           |
>  51 ++-
>  board/siemens/common/board.c                                       |
>  46 ++- board/siemens/{dxr2 =>
>  draco}/Makefile                             |    0 board/siemens/{dxr2
>  => draco}/board.c                              |  112 ++++---
>  board/siemens/{dxr2 => draco}/board.h                              |
>  26 +- board/siemens/{dxr2 =>
>  draco}/mux.c                                |    2 +-
>  board/siemens/pxm2/board.c                                         |
>  10 +-
>  board/siemens/rut/board.c
>  |    2 +-
>  board/ti/am335x/u-boot.lds
>  |    1 +
>  board/wandboard/wandboard.c                                        |
>  146 ++++++--
>  boards.cfg
>  |    9 +-
>  common/spl/spl_nand.c
>  |    2 +-
>  drivers/gpio/s5p_gpio.c                                            |
>  204 ++++++++++--
>  drivers/gpio/tegra_gpio.c                                          |
>  20 ++
>  drivers/mmc/tegra_mmc.c                                            |
>  13 +-
>  drivers/mtd/nand/omap_gpmc.c
>  |    2 +-
>  drivers/power/pmic/Makefile
>  |    1 +
>  drivers/power/pmic/pmic_ltc3676.c                                  |
>  32 ++
>  drivers/power/pmic/pmic_pfuze100.c
>  |    2 +-
>  drivers/video/Makefile
>  |    1 +
>  drivers/video/imx25lcdc.c                                          |
>  121 +++++++
>  include/configs/beaver.h
>  |    3 +
>  include/configs/cardhu.h
>  |    3 +
>  include/configs/da850evm.h
>  |    1 +
>  include/configs/draco.h                                            |
>  92 ++++++
>  include/configs/dxr2.h
>  |    4 +-
>  include/configs/embestmx6boards.h                                  |
>  336 +++++++++++++++++++
>  include/configs/exynos5-dt.h
>  |    2 +
>  include/configs/gw_ventana.h                                       |
>  20 ++
>  include/configs/hummingboard.h
>  |    2 +
>  include/configs/k2hk_evm.h
>  |    1 +
>  include/configs/koelsch.h                                          |
>  36 +-
>  include/configs/lager.h                                            |
>  40 +--
>  include/configs/m28evk.h
>  |    1 -
>  include/configs/mx53ard.h
>  |    2 +
>  include/configs/mx53evk.h
>  |    2 +
>  include/configs/mx53loco.h
>  |    2 +
>  include/configs/mx53smd.h
>  |    2 +
>  include/configs/mx6sabre_common.h
>  |    2 +
>  include/configs/mx6sabresd.h
>  |    1 +
>  include/configs/mx6slevk.h                                         |
>  12 +
>  include/configs/mxs.h
>  |    1 +
>  include/configs/nitrogen6x.h
>  |    2 +
>  include/configs/omap3_beagle.h                                     |
>  10 +-
>  include/configs/pepper.h                                           |
>  99 ++++++
>  include/configs/pxm2.h
>  |    2 +-
>  include/configs/s5p_goni.h
>  |    4 +-
>  include/configs/s5pc210_universal.h                                |
>  23 +-
>  include/configs/siemens-am33x-common.h
>  |    8 +-
>  include/configs/smdk5250.h
>  |    4 +
>  include/configs/smdk5420.h
>  |    4 +
>  include/configs/smdkv310.h
>  |    1 +
>  include/configs/snow.h
>  |    4 +
>  include/configs/tegra-common.h
>  |    7 +
>  include/configs/trats.h                                            |
>  17 +-
>  include/configs/trats2.h                                           |
>  17 +-
>  include/configs/udoo.h
>  |    2 +
>  include/configs/wandboard.h                                        |
>  38 ++-
>  include/palmas.h
>  |    4 +
>  include/power/ltc3676_pmic.h                                       |
>  51 +++
>  include/power/pfuze100_pmic.h
>  |    1 +
>  include/samsung/misc.h
>  |    2 + 156 files changed, 7581 insertions(+), 6187 deletions(-)
>  delete mode 100644 arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c
>  rename arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>
>  cpu_info-rcar.c} (50%) create mode 100644 arch/arm/imx-common/video.c
>  create mode 100644 arch/arm/include/asm/arch-rmobile/rcar-base.h
>  create mode 100644 arch/arm/include/asm/imx-common/video.h create mode
>  100644 arch/arm/lib/vectors.S create mode 100644
>  board/embest/mx6boards/Makefile create mode 100644
>  board/embest/mx6boards/mx6boards.c create mode 100644
>  board/gumstix/pepper/Makefile create mode 100644
>  board/gumstix/pepper/board.c create mode 100644
>  board/gumstix/pepper/board.h create mode 100644
>  board/gumstix/pepper/mux.c rename board/siemens/{dxr2 =>
>  draco}/Makefile (100%) rename board/siemens/{dxr2 => draco}/board.c
>  (63%) rename board/siemens/{dxr2 => draco}/board.h (71%) rename
>  board/siemens/{dxr2 => draco}/mux.c (99%) create mode 100644
>  drivers/power/pmic/pmic_ltc3676.c create mode 100644
>  drivers/video/imx25lcdc.c create mode 100644 include/configs/draco.h
>  create mode 100644 include/configs/embestmx6boards.h create mode
>  100644 include/configs/pepper.h create mode 100644
>  include/power/ltc3676_pmic.h

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140522/e7d4cfdc/attachment.pgp>