* [PATCH 0/6] ARM: OMAP AM33xx: PRM/CM support for 3.6
@ 2012-05-21 18:41 ` Paul Walmsley
0 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-05-21 18:41 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel
Hi
This series implements low-level PRM/CM support for the AM33xx series
of chips. This support is a prerequisite for the kernel to reset,
enable, and disable on-chip IP blocks.
This series applies against Tony's devel-soc branch at commit
8a7289f52543cc89de73e174946edaa21a2d049d ("ARM: OMAP2+: am33xx:
Make am33xx as a separate class") plus the "ARM: OMAP2+: am33xx:
Add AM335XEVM machine support" patch from Afzal. Currently they
are compile-tested only.
These patches are also available from git://git.pwsan.com/linux-2.6
in the branch 'am33xx_prcm_devel_3.6'.
- Paul
---
am33xx_prcm_devel_3.6
text data bss dec hex filename
6559798 722684 5587872 12870354 c462d2 vmlinux.omap2plus_defconfig.orig
6562162 729652 5587872 12879686 c48746 vmlinux.omap2plus_defconfig
Vaibhav Hiremath (6):
ARM: OMAP2+: control: Add AM33XX control reg & sec clkctrl offset
ARM: OMAP AM33xx: voltagedomain: Add voltage domain data
ARM: OMAP AM33xx: PRM: add PRM support
ARM: OMAP AM33xx: CM: Introduce AM33xx CM APIs and register level details
ARM: OMAP AM33xx: powerdomains: add AM335x support
ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations
arch/arm/mach-omap2/Makefile | 7
arch/arm/mach-omap2/clockdomain.h | 2
arch/arm/mach-omap2/clockdomain33xx.c | 74 +++
arch/arm/mach-omap2/clockdomains33xx_data.c | 196 +++++++
arch/arm/mach-omap2/cm-regbits-33xx.h | 687 +++++++++++++++++++++++++
arch/arm/mach-omap2/cm33xx.c | 313 +++++++++++
arch/arm/mach-omap2/cm33xx.h | 420 +++++++++++++++
arch/arm/mach-omap2/control.h | 39 +
arch/arm/mach-omap2/io.c | 5
arch/arm/mach-omap2/powerdomain.h | 23 +
arch/arm/mach-omap2/powerdomain33xx.c | 229 ++++++++
arch/arm/mach-omap2/powerdomains33xx_data.c | 185 +++++++
arch/arm/mach-omap2/prm-regbits-33xx.h | 357 +++++++++++++
arch/arm/mach-omap2/prm33xx.c | 134 +++++
arch/arm/mach-omap2/prm33xx.h | 129 +++++
arch/arm/mach-omap2/voltage.h | 1
arch/arm/mach-omap2/voltagedomains33xx_data.c | 43 ++
17 files changed, 2824 insertions(+), 20 deletions(-)
create mode 100644 arch/arm/mach-omap2/clockdomain33xx.c
create mode 100644 arch/arm/mach-omap2/clockdomains33xx_data.c
create mode 100644 arch/arm/mach-omap2/cm-regbits-33xx.h
create mode 100644 arch/arm/mach-omap2/cm33xx.c
create mode 100644 arch/arm/mach-omap2/cm33xx.h
create mode 100644 arch/arm/mach-omap2/powerdomain33xx.c
create mode 100644 arch/arm/mach-omap2/powerdomains33xx_data.c
create mode 100644 arch/arm/mach-omap2/prm-regbits-33xx.h
create mode 100644 arch/arm/mach-omap2/prm33xx.c
create mode 100644 arch/arm/mach-omap2/prm33xx.h
create mode 100644 arch/arm/mach-omap2/voltagedomains33xx_data.c
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 0/6] ARM: OMAP AM33xx: PRM/CM support for 3.6
@ 2012-05-21 18:41 ` Paul Walmsley
0 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-05-21 18:41 UTC (permalink / raw)
To: linux-arm-kernel
Hi
This series implements low-level PRM/CM support for the AM33xx series
of chips. This support is a prerequisite for the kernel to reset,
enable, and disable on-chip IP blocks.
This series applies against Tony's devel-soc branch at commit
8a7289f52543cc89de73e174946edaa21a2d049d ("ARM: OMAP2+: am33xx:
Make am33xx as a separate class") plus the "ARM: OMAP2+: am33xx:
Add AM335XEVM machine support" patch from Afzal. Currently they
are compile-tested only.
These patches are also available from git://git.pwsan.com/linux-2.6
in the branch 'am33xx_prcm_devel_3.6'.
- Paul
---
am33xx_prcm_devel_3.6
text data bss dec hex filename
6559798 722684 5587872 12870354 c462d2 vmlinux.omap2plus_defconfig.orig
6562162 729652 5587872 12879686 c48746 vmlinux.omap2plus_defconfig
Vaibhav Hiremath (6):
ARM: OMAP2+: control: Add AM33XX control reg & sec clkctrl offset
ARM: OMAP AM33xx: voltagedomain: Add voltage domain data
ARM: OMAP AM33xx: PRM: add PRM support
ARM: OMAP AM33xx: CM: Introduce AM33xx CM APIs and register level details
ARM: OMAP AM33xx: powerdomains: add AM335x support
ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations
arch/arm/mach-omap2/Makefile | 7
arch/arm/mach-omap2/clockdomain.h | 2
arch/arm/mach-omap2/clockdomain33xx.c | 74 +++
arch/arm/mach-omap2/clockdomains33xx_data.c | 196 +++++++
arch/arm/mach-omap2/cm-regbits-33xx.h | 687 +++++++++++++++++++++++++
arch/arm/mach-omap2/cm33xx.c | 313 +++++++++++
arch/arm/mach-omap2/cm33xx.h | 420 +++++++++++++++
arch/arm/mach-omap2/control.h | 39 +
arch/arm/mach-omap2/io.c | 5
arch/arm/mach-omap2/powerdomain.h | 23 +
arch/arm/mach-omap2/powerdomain33xx.c | 229 ++++++++
arch/arm/mach-omap2/powerdomains33xx_data.c | 185 +++++++
arch/arm/mach-omap2/prm-regbits-33xx.h | 357 +++++++++++++
arch/arm/mach-omap2/prm33xx.c | 134 +++++
arch/arm/mach-omap2/prm33xx.h | 129 +++++
arch/arm/mach-omap2/voltage.h | 1
arch/arm/mach-omap2/voltagedomains33xx_data.c | 43 ++
17 files changed, 2824 insertions(+), 20 deletions(-)
create mode 100644 arch/arm/mach-omap2/clockdomain33xx.c
create mode 100644 arch/arm/mach-omap2/clockdomains33xx_data.c
create mode 100644 arch/arm/mach-omap2/cm-regbits-33xx.h
create mode 100644 arch/arm/mach-omap2/cm33xx.c
create mode 100644 arch/arm/mach-omap2/cm33xx.h
create mode 100644 arch/arm/mach-omap2/powerdomain33xx.c
create mode 100644 arch/arm/mach-omap2/powerdomains33xx_data.c
create mode 100644 arch/arm/mach-omap2/prm-regbits-33xx.h
create mode 100644 arch/arm/mach-omap2/prm33xx.c
create mode 100644 arch/arm/mach-omap2/prm33xx.h
create mode 100644 arch/arm/mach-omap2/voltagedomains33xx_data.c
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 1/6] ARM: OMAP2+: control: Add AM33XX control reg & sec clkctrl offset
2012-05-21 18:41 ` Paul Walmsley
@ 2012-05-21 18:41 ` Paul Walmsley
-1 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-05-21 18:41 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel; +Cc: Tony Lindgren, Vaibhav Hiremath
From: Vaibhav Hiremath <hvaibhav@ti.com>
Define AM33XX control register, in order to allow access to
control register address space, also add CONTROL_SEC_CLK_CTRL
register offset; both are required in clock tree data,
for wdt0 and timer0 clock source select configuration.
CONTROL.SEC_CLK_CTRL register is provided to select/configure
clock input for WDT0 and TIMER0.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
[paul@pwsan.com: added include of plat/am33xx.h to fix build break;
added AM33XX_CONTROL_STATUS bitfields that will be needed for the clock
tree; fixed some control.h whitespace problems while here]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/control.h | 39 +++++++++++++++++++++++----------------
1 file changed, 23 insertions(+), 16 deletions(-)
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index a406fd0..c43f03c 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -21,6 +21,8 @@
#include <mach/ctrl_module_pad_core_44xx.h>
#include <mach/ctrl_module_pad_wkup_44xx.h>
+#include <plat/am33xx.h>
+
#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
@@ -28,6 +30,8 @@
OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define AM33XX_CTRL_REGADDR(reg) \
+ AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg))
#else
#define OMAP242X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
@@ -35,6 +39,8 @@
OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define AM33XX_CTRL_REGADDR(reg) \
+ AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg))
#endif /* __ASSEMBLY__ */
/*
@@ -312,15 +318,15 @@
OMAP343X_SCRATCHPAD + reg)
/* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
-#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0
-#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1
-#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2
-#define AM35XX_HECC_VBUSP_CLK_SHIFT 3
-#define AM35XX_USBOTG_FCLK_SHIFT 8
-#define AM35XX_CPGMAC_FCLK_SHIFT 9
-#define AM35XX_VPFE_FCLK_SHIFT 10
-
-/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/
+#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0
+#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1
+#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2
+#define AM35XX_HECC_VBUSP_CLK_SHIFT 3
+#define AM35XX_USBOTG_FCLK_SHIFT 8
+#define AM35XX_CPGMAC_FCLK_SHIFT 9
+#define AM35XX_VPFE_FCLK_SHIFT 10
+
+/* AM35XX CONTROL_LVL_INTR_CLEAR bits */
#define AM35XX_CPGMAC_C0_MISC_PULSE_CLR BIT(0)
#define AM35XX_CPGMAC_C0_RX_PULSE_CLR BIT(1)
#define AM35XX_CPGMAC_C0_RX_THRESH_CLR BIT(2)
@@ -330,21 +336,22 @@
#define AM35XX_VPFE_CCDC_VD1_INT_CLR BIT(6)
#define AM35XX_VPFE_CCDC_VD2_INT_CLR BIT(7)
-/*AM35XX CONTROL_IP_SW_RESET bits*/
+/* AM35XX CONTROL_IP_SW_RESET bits */
#define AM35XX_USBOTGSS_SW_RST BIT(0)
#define AM35XX_CPGMACSS_SW_RST BIT(1)
#define AM35XX_VPFE_VBUSP_SW_RST BIT(2)
#define AM35XX_HECC_SW_RST BIT(3)
#define AM35XX_VPFE_PCLK_SW_RST BIT(4)
-/*
- * CONTROL AM33XX STATUS register
- */
+/* AM33XX CONTROL_STATUS register */
#define AM33XX_CONTROL_STATUS 0x040
+#define AM33XX_CONTROL_SEC_CLK_CTRL 0x1bc
-/*
- * CONTROL OMAP STATUS register to identify OMAP3 features
- */
+/* AM33XX CONTROL_STATUS bitfields (partial) */
+#define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT 22
+#define AM33XX_CONTROL_STATUS_SYSBOOT1_MASK (0x3 << 22)
+
+/* CONTROL OMAP STATUS register to identify OMAP3 features */
#define OMAP3_CONTROL_OMAP_STATUS 0x044c
#define OMAP3_SGX_SHIFT 13
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 1/6] ARM: OMAP2+: control: Add AM33XX control reg & sec clkctrl offset
@ 2012-05-21 18:41 ` Paul Walmsley
0 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-05-21 18:41 UTC (permalink / raw)
To: linux-arm-kernel
From: Vaibhav Hiremath <hvaibhav@ti.com>
Define AM33XX control register, in order to allow access to
control register address space, also add CONTROL_SEC_CLK_CTRL
register offset; both are required in clock tree data,
for wdt0 and timer0 clock source select configuration.
CONTROL.SEC_CLK_CTRL register is provided to select/configure
clock input for WDT0 and TIMER0.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
[paul at pwsan.com: added include of plat/am33xx.h to fix build break;
added AM33XX_CONTROL_STATUS bitfields that will be needed for the clock
tree; fixed some control.h whitespace problems while here]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/control.h | 39 +++++++++++++++++++++++----------------
1 file changed, 23 insertions(+), 16 deletions(-)
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index a406fd0..c43f03c 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -21,6 +21,8 @@
#include <mach/ctrl_module_pad_core_44xx.h>
#include <mach/ctrl_module_pad_wkup_44xx.h>
+#include <plat/am33xx.h>
+
#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
@@ -28,6 +30,8 @@
OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define AM33XX_CTRL_REGADDR(reg) \
+ AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg))
#else
#define OMAP242X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
@@ -35,6 +39,8 @@
OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define AM33XX_CTRL_REGADDR(reg) \
+ AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg))
#endif /* __ASSEMBLY__ */
/*
@@ -312,15 +318,15 @@
OMAP343X_SCRATCHPAD + reg)
/* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
-#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0
-#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1
-#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2
-#define AM35XX_HECC_VBUSP_CLK_SHIFT 3
-#define AM35XX_USBOTG_FCLK_SHIFT 8
-#define AM35XX_CPGMAC_FCLK_SHIFT 9
-#define AM35XX_VPFE_FCLK_SHIFT 10
-
-/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/
+#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0
+#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1
+#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2
+#define AM35XX_HECC_VBUSP_CLK_SHIFT 3
+#define AM35XX_USBOTG_FCLK_SHIFT 8
+#define AM35XX_CPGMAC_FCLK_SHIFT 9
+#define AM35XX_VPFE_FCLK_SHIFT 10
+
+/* AM35XX CONTROL_LVL_INTR_CLEAR bits */
#define AM35XX_CPGMAC_C0_MISC_PULSE_CLR BIT(0)
#define AM35XX_CPGMAC_C0_RX_PULSE_CLR BIT(1)
#define AM35XX_CPGMAC_C0_RX_THRESH_CLR BIT(2)
@@ -330,21 +336,22 @@
#define AM35XX_VPFE_CCDC_VD1_INT_CLR BIT(6)
#define AM35XX_VPFE_CCDC_VD2_INT_CLR BIT(7)
-/*AM35XX CONTROL_IP_SW_RESET bits*/
+/* AM35XX CONTROL_IP_SW_RESET bits */
#define AM35XX_USBOTGSS_SW_RST BIT(0)
#define AM35XX_CPGMACSS_SW_RST BIT(1)
#define AM35XX_VPFE_VBUSP_SW_RST BIT(2)
#define AM35XX_HECC_SW_RST BIT(3)
#define AM35XX_VPFE_PCLK_SW_RST BIT(4)
-/*
- * CONTROL AM33XX STATUS register
- */
+/* AM33XX CONTROL_STATUS register */
#define AM33XX_CONTROL_STATUS 0x040
+#define AM33XX_CONTROL_SEC_CLK_CTRL 0x1bc
-/*
- * CONTROL OMAP STATUS register to identify OMAP3 features
- */
+/* AM33XX CONTROL_STATUS bitfields (partial) */
+#define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT 22
+#define AM33XX_CONTROL_STATUS_SYSBOOT1_MASK (0x3 << 22)
+
+/* CONTROL OMAP STATUS register to identify OMAP3 features */
#define OMAP3_CONTROL_OMAP_STATUS 0x044c
#define OMAP3_SGX_SHIFT 13
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data
2012-05-21 18:41 ` Paul Walmsley
@ 2012-05-21 18:41 ` Paul Walmsley
-1 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-05-21 18:41 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel
Cc: Kevin Hilman, Afzal Mohammed, Benoit Cousson, Tony Lindgren,
Rajendra Nayak, Vaibhav Hiremath
From: Vaibhav Hiremath <hvaibhav@ti.com>
Currently dummy voltage domain data is being created
in order to succeed boot process, nothing has been done
w.r.t actual hardware (voltage control).
Also, hook up the AM33XX voltage domain to OMAP framework.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
[paul@pwsan.com: updated for 3.5]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/Makefile | 1 +
arch/arm/mach-omap2/io.c | 3 +-
arch/arm/mach-omap2/voltage.h | 1 +
arch/arm/mach-omap2/voltagedomains33xx_data.c | 43 +++++++++++++++++++++++++
4 files changed, 47 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-omap2/voltagedomains33xx_data.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 288e1a3..464e14c 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -102,6 +102,7 @@ obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common)
+obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index df4d119..6cdc4ac 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -388,7 +388,7 @@ void __init omap2430_init_early(void)
* Currently only board-omap3beagle.c should call this because of the
* same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
*/
-#ifdef CONFIG_ARCH_OMAP3
+#ifdef CONFIG_SOC_OMAP3430
void __init omap3_init_early(void)
{
omap2_set_globals_3xxx();
@@ -445,6 +445,7 @@ void __init am33xx_init_early(void)
omap3xxx_check_revision();
ti81xx_check_features();
omap_common_init_early();
+ am33xx_voltagedomains_init();
}
#endif
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 16a1b09..a7c43c1 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -156,6 +156,7 @@ int omap_voltage_late_init(void);
extern void omap2xxx_voltagedomains_init(void);
extern void omap3xxx_voltagedomains_init(void);
+extern void am33xx_voltagedomains_init(void);
extern void omap44xx_voltagedomains_init(void);
struct voltagedomain *voltdm_lookup(const char *name);
diff --git a/arch/arm/mach-omap2/voltagedomains33xx_data.c b/arch/arm/mach-omap2/voltagedomains33xx_data.c
new file mode 100644
index 0000000..965458d
--- /dev/null
+++ b/arch/arm/mach-omap2/voltagedomains33xx_data.c
@@ -0,0 +1,43 @@
+/*
+ * AM33XX voltage domain data
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "voltage.h"
+
+static struct voltagedomain am33xx_voltdm_mpu = {
+ .name = "mpu",
+};
+
+static struct voltagedomain am33xx_voltdm_core = {
+ .name = "core",
+};
+
+static struct voltagedomain am33xx_voltdm_rtc = {
+ .name = "rtc",
+};
+
+static struct voltagedomain *voltagedomains_am33xx[] __initdata = {
+ &am33xx_voltdm_mpu,
+ &am33xx_voltdm_core,
+ &am33xx_voltdm_rtc,
+ NULL,
+};
+
+void __init am33xx_voltagedomains_init(void)
+{
+ voltdm_init(voltagedomains_am33xx);
+}
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data
@ 2012-05-21 18:41 ` Paul Walmsley
0 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-05-21 18:41 UTC (permalink / raw)
To: linux-arm-kernel
From: Vaibhav Hiremath <hvaibhav@ti.com>
Currently dummy voltage domain data is being created
in order to succeed boot process, nothing has been done
w.r.t actual hardware (voltage control).
Also, hook up the AM33XX voltage domain to OMAP framework.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
[paul at pwsan.com: updated for 3.5]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/Makefile | 1 +
arch/arm/mach-omap2/io.c | 3 +-
arch/arm/mach-omap2/voltage.h | 1 +
arch/arm/mach-omap2/voltagedomains33xx_data.c | 43 +++++++++++++++++++++++++
4 files changed, 47 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-omap2/voltagedomains33xx_data.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 288e1a3..464e14c 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -102,6 +102,7 @@ obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common)
+obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index df4d119..6cdc4ac 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -388,7 +388,7 @@ void __init omap2430_init_early(void)
* Currently only board-omap3beagle.c should call this because of the
* same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
*/
-#ifdef CONFIG_ARCH_OMAP3
+#ifdef CONFIG_SOC_OMAP3430
void __init omap3_init_early(void)
{
omap2_set_globals_3xxx();
@@ -445,6 +445,7 @@ void __init am33xx_init_early(void)
omap3xxx_check_revision();
ti81xx_check_features();
omap_common_init_early();
+ am33xx_voltagedomains_init();
}
#endif
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 16a1b09..a7c43c1 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -156,6 +156,7 @@ int omap_voltage_late_init(void);
extern void omap2xxx_voltagedomains_init(void);
extern void omap3xxx_voltagedomains_init(void);
+extern void am33xx_voltagedomains_init(void);
extern void omap44xx_voltagedomains_init(void);
struct voltagedomain *voltdm_lookup(const char *name);
diff --git a/arch/arm/mach-omap2/voltagedomains33xx_data.c b/arch/arm/mach-omap2/voltagedomains33xx_data.c
new file mode 100644
index 0000000..965458d
--- /dev/null
+++ b/arch/arm/mach-omap2/voltagedomains33xx_data.c
@@ -0,0 +1,43 @@
+/*
+ * AM33XX voltage domain data
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "voltage.h"
+
+static struct voltagedomain am33xx_voltdm_mpu = {
+ .name = "mpu",
+};
+
+static struct voltagedomain am33xx_voltdm_core = {
+ .name = "core",
+};
+
+static struct voltagedomain am33xx_voltdm_rtc = {
+ .name = "rtc",
+};
+
+static struct voltagedomain *voltagedomains_am33xx[] __initdata = {
+ &am33xx_voltdm_mpu,
+ &am33xx_voltdm_core,
+ &am33xx_voltdm_rtc,
+ NULL,
+};
+
+void __init am33xx_voltagedomains_init(void)
+{
+ voltdm_init(voltagedomains_am33xx);
+}
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 3/6] ARM: OMAP AM33xx: PRM: add PRM support
2012-05-21 18:41 ` Paul Walmsley
@ 2012-05-21 18:41 ` Paul Walmsley
-1 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-05-21 18:41 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel
Cc: Kevin Hilman, Afzal Mohammed, Benoit Cousson, Tony Lindgren,
Rajendra Nayak, Vaibhav Hiremath
From: Vaibhav Hiremath <hvaibhav@ti.com>
As far as PRM/CM/PRCM modules are concerned, AM33XX device is
different than OMAP3 and OMAP4 architectures; so we need to handle it
separately. This patch adds support for the PRM APIs required for
AM33XX device.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: separated the PRM parts of "ARM: OMAP3+: am33xx: Add
powerdomain & PRM support" into this patch; fixed Makefile prm33xx.o
location; cleaned up some checkpatch violations; updated for 3.5]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/Makefile | 2
arch/arm/mach-omap2/prm-regbits-33xx.h | 357 ++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/prm33xx.c | 134 ++++++++++++
arch/arm/mach-omap2/prm33xx.h | 129 ++++++++++++
4 files changed, 621 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-omap2/prm-regbits-33xx.h
create mode 100644 arch/arm/mach-omap2/prm33xx.c
create mode 100644 arch/arm/mach-omap2/prm33xx.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 464e14c..32aed2d 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -91,7 +91,7 @@ obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += prcm.o cminst44xx.o cm44xx.o
obj-$(CONFIG_ARCH_OMAP4) += prcm_mpu44xx.o prminst44xx.o
obj-$(CONFIG_ARCH_OMAP4) += vc44xx_data.o vp44xx_data.o prm44xx.o
-obj-$(CONFIG_SOC_AM33XX) += prcm.o
+obj-$(CONFIG_SOC_AM33XX) += prcm.o prm33xx.o
# OMAP voltage domains
voltagedomain-common := voltage.o vc.o vp.o
diff --git a/arch/arm/mach-omap2/prm-regbits-33xx.h b/arch/arm/mach-omap2/prm-regbits-33xx.h
new file mode 100644
index 0000000..0221b5c
--- /dev/null
+++ b/arch/arm/mach-omap2/prm-regbits-33xx.h
@@ -0,0 +1,357 @@
+/*
+ * AM33XX PRM_XXX register bits
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_33XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_33XX_H
+
+#include "prm.h"
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ABBOFF_ACT_EXPORT_SHIFT 1
+#define AM33XX_ABBOFF_ACT_EXPORT_MASK (1 << 1)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ABBOFF_SLEEP_EXPORT_SHIFT 2
+#define AM33XX_ABBOFF_SLEEP_EXPORT_MASK (1 << 2)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_AIPOFF_SHIFT 8
+#define AM33XX_AIPOFF_MASK (1 << 8)
+
+/* Used by PM_WKUP_PWRSTST */
+#define AM33XX_DEBUGSS_MEM_STATEST_SHIFT 17
+#define AM33XX_DEBUGSS_MEM_STATEST_MASK (0x3 << 17)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_DISABLE_RTA_EXPORT_SHIFT 0
+#define AM33XX_DISABLE_RTA_EXPORT_MASK (1 << 0)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_CORE_RECAL_EN_SHIFT 12
+#define AM33XX_DPLL_CORE_RECAL_EN_MASK (1 << 12)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_CORE_RECAL_ST_SHIFT 12
+#define AM33XX_DPLL_CORE_RECAL_ST_MASK (1 << 12)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_DDR_RECAL_EN_SHIFT 14
+#define AM33XX_DPLL_DDR_RECAL_EN_MASK (1 << 14)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_DDR_RECAL_ST_SHIFT 14
+#define AM33XX_DPLL_DDR_RECAL_ST_MASK (1 << 14)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_DISP_RECAL_EN_SHIFT 15
+#define AM33XX_DPLL_DISP_RECAL_EN_MASK (1 << 15)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_DISP_RECAL_ST_SHIFT 13
+#define AM33XX_DPLL_DISP_RECAL_ST_MASK (1 << 13)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_MPU_RECAL_EN_SHIFT 11
+#define AM33XX_DPLL_MPU_RECAL_EN_MASK (1 << 11)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_MPU_RECAL_ST_SHIFT 11
+#define AM33XX_DPLL_MPU_RECAL_ST_MASK (1 << 11)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_PER_RECAL_EN_SHIFT 13
+#define AM33XX_DPLL_PER_RECAL_EN_MASK (1 << 13)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_PER_RECAL_ST_SHIFT 15
+#define AM33XX_DPLL_PER_RECAL_ST_MASK (1 << 15)
+
+/* Used by RM_WKUP_RSTST */
+#define AM33XX_EMULATION_M3_RST_SHIFT 6
+#define AM33XX_EMULATION_M3_RST_MASK (1 << 6)
+
+/* Used by RM_MPU_RSTST */
+#define AM33XX_EMULATION_MPU_RST_SHIFT 5
+#define AM33XX_EMULATION_MPU_RST_MASK (1 << 5)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ENFUNC1_EXPORT_SHIFT 3
+#define AM33XX_ENFUNC1_EXPORT_MASK (1 << 3)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ENFUNC3_EXPORT_SHIFT 5
+#define AM33XX_ENFUNC3_EXPORT_MASK (1 << 5)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ENFUNC4_SHIFT 6
+#define AM33XX_ENFUNC4_MASK (1 << 6)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ENFUNC5_SHIFT 7
+#define AM33XX_ENFUNC5_MASK (1 << 7)
+
+/* Used by PRM_RSTST */
+#define AM33XX_EXTERNAL_WARM_RST_SHIFT 5
+#define AM33XX_EXTERNAL_WARM_RST_MASK (1 << 5)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_FORCEWKUP_EN_SHIFT 10
+#define AM33XX_FORCEWKUP_EN_MASK (1 << 10)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_FORCEWKUP_ST_SHIFT 10
+#define AM33XX_FORCEWKUP_ST_MASK (1 << 10)
+
+/* Used by PM_GFX_PWRSTCTRL */
+#define AM33XX_GFX_MEM_ONSTATE_SHIFT 17
+#define AM33XX_GFX_MEM_ONSTATE_MASK (0x3 << 17)
+
+/* Used by PM_GFX_PWRSTCTRL */
+#define AM33XX_GFX_MEM_RETSTATE_SHIFT 6
+#define AM33XX_GFX_MEM_RETSTATE_MASK (1 << 6)
+
+/* Used by PM_GFX_PWRSTST */
+#define AM33XX_GFX_MEM_STATEST_SHIFT 4
+#define AM33XX_GFX_MEM_STATEST_MASK (0x3 << 4)
+
+/* Used by RM_GFX_RSTCTRL, RM_GFX_RSTST */
+#define AM33XX_GFX_RST_SHIFT 0
+#define AM33XX_GFX_RST_MASK (1 << 0)
+
+/* Used by PRM_RSTST */
+#define AM33XX_GLOBAL_COLD_RST_SHIFT 0
+#define AM33XX_GLOBAL_COLD_RST_MASK (1 << 0)
+
+/* Used by PRM_RSTST */
+#define AM33XX_GLOBAL_WARM_SW_RST_SHIFT 1
+#define AM33XX_GLOBAL_WARM_SW_RST_MASK (1 << 1)
+
+/* Used by RM_WKUP_RSTST */
+#define AM33XX_ICECRUSHER_M3_RST_SHIFT 7
+#define AM33XX_ICECRUSHER_M3_RST_MASK (1 << 7)
+
+/* Used by RM_MPU_RSTST */
+#define AM33XX_ICECRUSHER_MPU_RST_SHIFT 6
+#define AM33XX_ICECRUSHER_MPU_RST_MASK (1 << 6)
+
+/* Used by PRM_RSTST */
+#define AM33XX_ICEPICK_RST_SHIFT 9
+#define AM33XX_ICEPICK_RST_MASK (1 << 9)
+
+/* Used by RM_PER_RSTCTRL */
+#define AM33XX_PRUSS_LRST_SHIFT 1
+#define AM33XX_PRUSS_LRST_MASK (1 << 1)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_PRUSS_MEM_ONSTATE_SHIFT 5
+#define AM33XX_PRUSS_MEM_ONSTATE_MASK (0x3 << 5)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_PRUSS_MEM_RETSTATE_SHIFT 7
+#define AM33XX_PRUSS_MEM_RETSTATE_MASK (1 << 7)
+
+/* Used by PM_PER_PWRSTST */
+#define AM33XX_PRUSS_MEM_STATEST_SHIFT 23
+#define AM33XX_PRUSS_MEM_STATEST_MASK (0x3 << 23)
+
+/*
+ * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST,
+ * PM_WKUP_PWRSTST, PM_RTC_PWRSTST
+ */
+#define AM33XX_INTRANSITION_SHIFT 20
+#define AM33XX_INTRANSITION_MASK (1 << 20)
+
+/* Used by PM_CEFUSE_PWRSTST */
+#define AM33XX_LASTPOWERSTATEENTERED_SHIFT 24
+#define AM33XX_LASTPOWERSTATEENTERED_MASK (0x3 << 24)
+
+/* Used by PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_RTC_PWRSTCTRL */
+#define AM33XX_LOGICRETSTATE_SHIFT 2
+#define AM33XX_LOGICRETSTATE_MASK (1 << 2)
+
+/* Renamed from LOGICRETSTATE Used by PM_PER_PWRSTCTRL, PM_WKUP_PWRSTCTRL */
+#define AM33XX_LOGICRETSTATE_3_3_SHIFT 3
+#define AM33XX_LOGICRETSTATE_3_3_MASK (1 << 3)
+
+/*
+ * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST,
+ * PM_WKUP_PWRSTST, PM_RTC_PWRSTST
+ */
+#define AM33XX_LOGICSTATEST_SHIFT 2
+#define AM33XX_LOGICSTATEST_MASK (1 << 2)
+
+/*
+ * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL,
+ * PM_MPU_PWRSTCTRL, PM_WKUP_PWRSTCTRL, PM_RTC_PWRSTCTRL
+ */
+#define AM33XX_LOWPOWERSTATECHANGE_SHIFT 4
+#define AM33XX_LOWPOWERSTATECHANGE_MASK (1 << 4)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_L1_ONSTATE_SHIFT 18
+#define AM33XX_MPU_L1_ONSTATE_MASK (0x3 << 18)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_L1_RETSTATE_SHIFT 22
+#define AM33XX_MPU_L1_RETSTATE_MASK (1 << 22)
+
+/* Used by PM_MPU_PWRSTST */
+#define AM33XX_MPU_L1_STATEST_SHIFT 6
+#define AM33XX_MPU_L1_STATEST_MASK (0x3 << 6)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_L2_ONSTATE_SHIFT 20
+#define AM33XX_MPU_L2_ONSTATE_MASK (0x3 << 20)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_L2_RETSTATE_SHIFT 23
+#define AM33XX_MPU_L2_RETSTATE_MASK (1 << 23)
+
+/* Used by PM_MPU_PWRSTST */
+#define AM33XX_MPU_L2_STATEST_SHIFT 8
+#define AM33XX_MPU_L2_STATEST_MASK (0x3 << 8)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_RAM_ONSTATE_SHIFT 16
+#define AM33XX_MPU_RAM_ONSTATE_MASK (0x3 << 16)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_RAM_RETSTATE_SHIFT 24
+#define AM33XX_MPU_RAM_RETSTATE_MASK (1 << 24)
+
+/* Used by PM_MPU_PWRSTST */
+#define AM33XX_MPU_RAM_STATEST_SHIFT 4
+#define AM33XX_MPU_RAM_STATEST_MASK (0x3 << 4)
+
+/* Used by PRM_RSTST */
+#define AM33XX_MPU_SECURITY_VIOL_RST_SHIFT 2
+#define AM33XX_MPU_SECURITY_VIOL_RST_MASK (1 << 2)
+
+/* Used by PRM_SRAM_COUNT */
+#define AM33XX_PCHARGECNT_VALUE_SHIFT 0
+#define AM33XX_PCHARGECNT_VALUE_MASK (0x3f << 0)
+
+/* Used by RM_PER_RSTCTRL */
+#define AM33XX_PCI_LRST_SHIFT 0
+#define AM33XX_PCI_LRST_MASK (1 << 0)
+
+/* Renamed from PCI_LRST Used by RM_PER_RSTST */
+#define AM33XX_PCI_LRST_5_5_SHIFT 5
+#define AM33XX_PCI_LRST_5_5_MASK (1 << 5)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_PER_MEM_ONSTATE_SHIFT 25
+#define AM33XX_PER_MEM_ONSTATE_MASK (0x3 << 25)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_PER_MEM_RETSTATE_SHIFT 29
+#define AM33XX_PER_MEM_RETSTATE_MASK (1 << 29)
+
+/* Used by PM_PER_PWRSTST */
+#define AM33XX_PER_MEM_STATEST_SHIFT 17
+#define AM33XX_PER_MEM_STATEST_MASK (0x3 << 17)
+
+/*
+ * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL,
+ * PM_MPU_PWRSTCTRL
+ */
+#define AM33XX_POWERSTATE_SHIFT 0
+#define AM33XX_POWERSTATE_MASK (0x3 << 0)
+
+/* Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST */
+#define AM33XX_POWERSTATEST_SHIFT 0
+#define AM33XX_POWERSTATEST_MASK (0x3 << 0)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_RAM_MEM_ONSTATE_SHIFT 30
+#define AM33XX_RAM_MEM_ONSTATE_MASK (0x3 << 30)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_RAM_MEM_RETSTATE_SHIFT 27
+#define AM33XX_RAM_MEM_RETSTATE_MASK (1 << 27)
+
+/* Used by PM_PER_PWRSTST */
+#define AM33XX_RAM_MEM_STATEST_SHIFT 21
+#define AM33XX_RAM_MEM_STATEST_MASK (0x3 << 21)
+
+/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
+#define AM33XX_RETMODE_ENABLE_SHIFT 0
+#define AM33XX_RETMODE_ENABLE_MASK (1 << 0)
+
+/* Used by REVISION_PRM */
+#define AM33XX_REV_SHIFT 0
+#define AM33XX_REV_MASK (0xff << 0)
+
+/* Used by PRM_RSTTIME */
+#define AM33XX_RSTTIME1_SHIFT 0
+#define AM33XX_RSTTIME1_MASK (0xff << 0)
+
+/* Used by PRM_RSTTIME */
+#define AM33XX_RSTTIME2_SHIFT 8
+#define AM33XX_RSTTIME2_MASK (0x1f << 8)
+
+/* Used by PRM_RSTCTRL */
+#define AM33XX_RST_GLOBAL_COLD_SW_SHIFT 1
+#define AM33XX_RST_GLOBAL_COLD_SW_MASK (1 << 1)
+
+/* Used by PRM_RSTCTRL */
+#define AM33XX_RST_GLOBAL_WARM_SW_SHIFT 0
+#define AM33XX_RST_GLOBAL_WARM_SW_MASK (1 << 0)
+
+/* Used by PRM_SRAM_COUNT */
+#define AM33XX_SLPCNT_VALUE_SHIFT 16
+#define AM33XX_SLPCNT_VALUE_MASK (0xff << 16)
+
+/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
+#define AM33XX_SRAMLDO_STATUS_SHIFT 8
+#define AM33XX_SRAMLDO_STATUS_MASK (1 << 8)
+
+/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
+#define AM33XX_SRAM_IN_TRANSITION_SHIFT 9
+#define AM33XX_SRAM_IN_TRANSITION_MASK (1 << 9)
+
+/* Used by PRM_SRAM_COUNT */
+#define AM33XX_STARTUP_COUNT_SHIFT 24
+#define AM33XX_STARTUP_COUNT_MASK (0xff << 24)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_TRANSITION_EN_SHIFT 8
+#define AM33XX_TRANSITION_EN_MASK (1 << 8)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_TRANSITION_ST_SHIFT 8
+#define AM33XX_TRANSITION_ST_MASK (1 << 8)
+
+/* Used by PRM_SRAM_COUNT */
+#define AM33XX_VSETUPCNT_VALUE_SHIFT 8
+#define AM33XX_VSETUPCNT_VALUE_MASK (0xff << 8)
+
+/* Used by PRM_RSTST */
+#define AM33XX_WDT0_RST_SHIFT 3
+#define AM33XX_WDT0_RST_MASK (1 << 3)
+
+/* Used by PRM_RSTST */
+#define AM33XX_WDT1_RST_SHIFT 4
+#define AM33XX_WDT1_RST_MASK (1 << 4)
+
+/* Used by RM_WKUP_RSTCTRL */
+#define AM33XX_WKUP_M3_LRST_SHIFT 3
+#define AM33XX_WKUP_M3_LRST_MASK (1 << 3)
+
+/* Renamed from WKUP_M3_LRST Used by RM_WKUP_RSTST */
+#define AM33XX_WKUP_M3_LRST_5_5_SHIFT 5
+#define AM33XX_WKUP_M3_LRST_5_5_MASK (1 << 5)
+
+#endif
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
new file mode 100644
index 0000000..7444855
--- /dev/null
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -0,0 +1,134 @@
+/*
+ * AM33XX PRM functions
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+
+#include "common.h"
+#include "prm33xx.h"
+#include "prm-regbits-33xx.h"
+
+/* Read a register in a PRM instance */
+u32 am33xx_prm_read_reg(s16 inst, u16 idx)
+{
+ return __raw_readl(prm_base + inst + idx);
+}
+
+/* Write into a register in a PRM instance */
+void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx)
+{
+ __raw_writel(val, prm_base + inst + idx);
+}
+
+/* Read-modify-write a register in PRM. Caller must lock */
+u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(inst, idx);
+ v &= ~mask;
+ v |= bits;
+ am33xx_prm_write_reg(v, inst, idx);
+
+ return v;
+}
+
+/**
+ * am33xx_prm_is_hardreset_asserted - read the HW reset line state of
+ * submodules contained in the hwmod module
+ * @shift: register bit shift corresponding to the reset line to check
+ * @inst: CM instance register offset (*_INST macro)
+ * @rstctrl_offs: RM_RSTCTRL register address offset for this module
+ *
+ * Returns 1 if the (sub)module hardreset line is currently asserted,
+ * 0 if the (sub)module hardreset line is not currently asserted, or
+ * -EINVAL upon parameter error.
+ */
+int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(inst, rstctrl_offs);
+ v &= 1 << shift;
+ v >>= shift;
+
+ return v;
+}
+
+/**
+ * am33xx_prm_assert_hardreset - assert the HW reset line of a submodule
+ * @shift: register bit shift corresponding to the reset line to assert
+ * @inst: CM instance register offset (*_INST macro)
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP. These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block. This function will
+ * place the submodule into reset. Returns 0 upon success or -EINVAL
+ * upon an argument error.
+ */
+int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs)
+{
+ u32 mask = 1 << shift;
+
+ am33xx_prm_rmw_reg_bits(mask, mask, inst, rstctrl_offs);
+
+ return 0;
+}
+
+/**
+ * am33xx_prm_deassert_hardreset - deassert a submodule hardreset line and
+ * wait
+ * @shift: register bit shift corresponding to the reset line to deassert
+ * @inst: CM instance register offset (*_INST macro)
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @rstst_reg: RM_RSTST register address for this module
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP. These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block. This function will
+ * take the submodule out of reset and wait until the PRCM indicates
+ * that the reset has completed before returning. Returns 0 upon success or
+ * -EINVAL upon an argument error, -EEXIST if the submodule was already out
+ * of reset, or -EBUSY if the submodule did not exit reset promptly.
+ */
+int am33xx_prm_deassert_hardreset(u8 shift, s16 inst,
+ u16 rstctrl_offs, u16 rstst_offs)
+{
+ int c;
+ u32 mask = 1 << shift;
+
+ /* Check the current status to avoid de-asserting the line twice */
+ if (am33xx_prm_is_hardreset_asserted(shift, inst, rstctrl_offs) == 0)
+ return -EEXIST;
+
+ /* Clear the reset status by writing 1 to the status bit */
+ am33xx_prm_rmw_reg_bits(0xffffffff, mask, inst, rstst_offs);
+ /* de-assert the reset control line */
+ am33xx_prm_rmw_reg_bits(mask, 0, inst, rstctrl_offs);
+ /* wait the status to be set */
+
+ omap_test_timeout(am33xx_prm_is_hardreset_asserted(shift, inst,
+ rstst_offs), MAX_MODULE_HARDRESET_WAIT, c);
+
+ return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
+}
diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h
new file mode 100644
index 0000000..3f25c56
--- /dev/null
+++ b/arch/arm/mach-omap2/prm33xx.h
@@ -0,0 +1,129 @@
+/*
+ * AM33XX PRM instance offset macros
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM33XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM33XX_H
+
+#include "prcm-common.h"
+#include "prm.h"
+
+#define AM33XX_PRM_BASE 0x44E00000
+
+#define AM33XX_PRM_REGADDR(inst, reg) \
+ AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRM_BASE + (inst) + (reg))
+
+
+/* PRM instances */
+#define AM33XX_PRM_OCP_SOCKET_MOD 0x0B00
+#define AM33XX_PRM_PER_MOD 0x0C00
+#define AM33XX_PRM_WKUP_MOD 0x0D00
+#define AM33XX_PRM_MPU_MOD 0x0E00
+#define AM33XX_PRM_DEVICE_MOD 0x0F00
+#define AM33XX_PRM_RTC_MOD 0x1000
+#define AM33XX_PRM_GFX_MOD 0x1100
+#define AM33XX_PRM_CEFUSE_MOD 0x1200
+
+/* PRM */
+
+/* PRM.OCP_SOCKET_PRM register offsets */
+#define AM33XX_REVISION_PRM_OFFSET 0x0000
+#define AM33XX_REVISION_PRM AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0000)
+#define AM33XX_PRM_IRQSTATUS_MPU_OFFSET 0x0004
+#define AM33XX_PRM_IRQSTATUS_MPU AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0004)
+#define AM33XX_PRM_IRQENABLE_MPU_OFFSET 0x0008
+#define AM33XX_PRM_IRQENABLE_MPU AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0008)
+#define AM33XX_PRM_IRQSTATUS_M3_OFFSET 0x000c
+#define AM33XX_PRM_IRQSTATUS_M3 AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x000c)
+#define AM33XX_PRM_IRQENABLE_M3_OFFSET 0x0010
+#define AM33XX_PRM_IRQENABLE_M3 AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0010)
+
+/* PRM.PER_PRM register offsets */
+#define AM33XX_RM_PER_RSTCTRL_OFFSET 0x0000
+#define AM33XX_RM_PER_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0000)
+#define AM33XX_RM_PER_RSTST_OFFSET 0x0004
+#define AM33XX_RM_PER_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0004)
+#define AM33XX_PM_PER_PWRSTST_OFFSET 0x0008
+#define AM33XX_PM_PER_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0008)
+#define AM33XX_PM_PER_PWRSTCTRL_OFFSET 0x000c
+#define AM33XX_PM_PER_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x000c)
+
+/* PRM.WKUP_PRM register offsets */
+#define AM33XX_RM_WKUP_RSTCTRL_OFFSET 0x0000
+#define AM33XX_RM_WKUP_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0000)
+#define AM33XX_PM_WKUP_PWRSTCTRL_OFFSET 0x0004
+#define AM33XX_PM_WKUP_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0004)
+#define AM33XX_PM_WKUP_PWRSTST_OFFSET 0x0008
+#define AM33XX_PM_WKUP_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0008)
+#define AM33XX_RM_WKUP_RSTST_OFFSET 0x000c
+#define AM33XX_RM_WKUP_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x000c)
+
+/* PRM.MPU_PRM register offsets */
+#define AM33XX_PM_MPU_PWRSTCTRL_OFFSET 0x0000
+#define AM33XX_PM_MPU_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0000)
+#define AM33XX_PM_MPU_PWRSTST_OFFSET 0x0004
+#define AM33XX_PM_MPU_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0004)
+#define AM33XX_RM_MPU_RSTST_OFFSET 0x0008
+#define AM33XX_RM_MPU_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0008)
+
+/* PRM.DEVICE_PRM register offsets */
+#define AM33XX_PRM_RSTCTRL_OFFSET 0x0000
+#define AM33XX_PRM_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0000)
+#define AM33XX_PRM_RSTTIME_OFFSET 0x0004
+#define AM33XX_PRM_RSTTIME AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0004)
+#define AM33XX_PRM_RSTST_OFFSET 0x0008
+#define AM33XX_PRM_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0008)
+#define AM33XX_PRM_SRAM_COUNT_OFFSET 0x000c
+#define AM33XX_PRM_SRAM_COUNT AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x000c)
+#define AM33XX_PRM_LDO_SRAM_CORE_SETUP_OFFSET 0x0010
+#define AM33XX_PRM_LDO_SRAM_CORE_SETUP AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0010)
+#define AM33XX_PRM_LDO_SRAM_CORE_CTRL_OFFSET 0x0014
+#define AM33XX_PRM_LDO_SRAM_CORE_CTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0014)
+#define AM33XX_PRM_LDO_SRAM_MPU_SETUP_OFFSET 0x0018
+#define AM33XX_PRM_LDO_SRAM_MPU_SETUP AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0018)
+#define AM33XX_PRM_LDO_SRAM_MPU_CTRL_OFFSET 0x001c
+#define AM33XX_PRM_LDO_SRAM_MPU_CTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x001c)
+
+/* PRM.RTC_PRM register offsets */
+#define AM33XX_PM_RTC_PWRSTCTRL_OFFSET 0x0000
+#define AM33XX_PM_RTC_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_RTC_MOD, 0x0000)
+#define AM33XX_PM_RTC_PWRSTST_OFFSET 0x0004
+#define AM33XX_PM_RTC_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_RTC_MOD, 0x0004)
+
+/* PRM.GFX_PRM register offsets */
+#define AM33XX_PM_GFX_PWRSTCTRL_OFFSET 0x0000
+#define AM33XX_PM_GFX_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0000)
+#define AM33XX_RM_GFX_RSTCTRL_OFFSET 0x0004
+#define AM33XX_RM_GFX_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0004)
+#define AM33XX_PM_GFX_PWRSTST_OFFSET 0x0010
+#define AM33XX_PM_GFX_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0010)
+#define AM33XX_RM_GFX_RSTST_OFFSET 0x0014
+#define AM33XX_RM_GFX_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0014)
+
+/* PRM.CEFUSE_PRM register offsets */
+#define AM33XX_PM_CEFUSE_PWRSTCTRL_OFFSET 0x0000
+#define AM33XX_PM_CEFUSE_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0000)
+#define AM33XX_PM_CEFUSE_PWRSTST_OFFSET 0x0004
+#define AM33XX_PM_CEFUSE_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004)
+
+extern u32 am33xx_prm_read_reg(s16 inst, u16 idx);
+extern void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx);
+extern u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
+extern void am33xx_prm_global_warm_sw_reset(void);
+extern int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst,
+ u16 rstctrl_offs);
+extern int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs);
+extern int am33xx_prm_deassert_hardreset(u8 shift, s16 inst,
+ u16 rstctrl_offs, u16 rstst_offs);
+#endif
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 3/6] ARM: OMAP AM33xx: PRM: add PRM support
@ 2012-05-21 18:41 ` Paul Walmsley
0 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-05-21 18:41 UTC (permalink / raw)
To: linux-arm-kernel
From: Vaibhav Hiremath <hvaibhav@ti.com>
As far as PRM/CM/PRCM modules are concerned, AM33XX device is
different than OMAP3 and OMAP4 architectures; so we need to handle it
separately. This patch adds support for the PRM APIs required for
AM33XX device.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
[paul at pwsan.com: separated the PRM parts of "ARM: OMAP3+: am33xx: Add
powerdomain & PRM support" into this patch; fixed Makefile prm33xx.o
location; cleaned up some checkpatch violations; updated for 3.5]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/Makefile | 2
arch/arm/mach-omap2/prm-regbits-33xx.h | 357 ++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/prm33xx.c | 134 ++++++++++++
arch/arm/mach-omap2/prm33xx.h | 129 ++++++++++++
4 files changed, 621 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-omap2/prm-regbits-33xx.h
create mode 100644 arch/arm/mach-omap2/prm33xx.c
create mode 100644 arch/arm/mach-omap2/prm33xx.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 464e14c..32aed2d 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -91,7 +91,7 @@ obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += prcm.o cminst44xx.o cm44xx.o
obj-$(CONFIG_ARCH_OMAP4) += prcm_mpu44xx.o prminst44xx.o
obj-$(CONFIG_ARCH_OMAP4) += vc44xx_data.o vp44xx_data.o prm44xx.o
-obj-$(CONFIG_SOC_AM33XX) += prcm.o
+obj-$(CONFIG_SOC_AM33XX) += prcm.o prm33xx.o
# OMAP voltage domains
voltagedomain-common := voltage.o vc.o vp.o
diff --git a/arch/arm/mach-omap2/prm-regbits-33xx.h b/arch/arm/mach-omap2/prm-regbits-33xx.h
new file mode 100644
index 0000000..0221b5c
--- /dev/null
+++ b/arch/arm/mach-omap2/prm-regbits-33xx.h
@@ -0,0 +1,357 @@
+/*
+ * AM33XX PRM_XXX register bits
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_33XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_33XX_H
+
+#include "prm.h"
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ABBOFF_ACT_EXPORT_SHIFT 1
+#define AM33XX_ABBOFF_ACT_EXPORT_MASK (1 << 1)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ABBOFF_SLEEP_EXPORT_SHIFT 2
+#define AM33XX_ABBOFF_SLEEP_EXPORT_MASK (1 << 2)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_AIPOFF_SHIFT 8
+#define AM33XX_AIPOFF_MASK (1 << 8)
+
+/* Used by PM_WKUP_PWRSTST */
+#define AM33XX_DEBUGSS_MEM_STATEST_SHIFT 17
+#define AM33XX_DEBUGSS_MEM_STATEST_MASK (0x3 << 17)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_DISABLE_RTA_EXPORT_SHIFT 0
+#define AM33XX_DISABLE_RTA_EXPORT_MASK (1 << 0)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_CORE_RECAL_EN_SHIFT 12
+#define AM33XX_DPLL_CORE_RECAL_EN_MASK (1 << 12)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_CORE_RECAL_ST_SHIFT 12
+#define AM33XX_DPLL_CORE_RECAL_ST_MASK (1 << 12)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_DDR_RECAL_EN_SHIFT 14
+#define AM33XX_DPLL_DDR_RECAL_EN_MASK (1 << 14)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_DDR_RECAL_ST_SHIFT 14
+#define AM33XX_DPLL_DDR_RECAL_ST_MASK (1 << 14)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_DISP_RECAL_EN_SHIFT 15
+#define AM33XX_DPLL_DISP_RECAL_EN_MASK (1 << 15)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_DISP_RECAL_ST_SHIFT 13
+#define AM33XX_DPLL_DISP_RECAL_ST_MASK (1 << 13)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_MPU_RECAL_EN_SHIFT 11
+#define AM33XX_DPLL_MPU_RECAL_EN_MASK (1 << 11)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_MPU_RECAL_ST_SHIFT 11
+#define AM33XX_DPLL_MPU_RECAL_ST_MASK (1 << 11)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_PER_RECAL_EN_SHIFT 13
+#define AM33XX_DPLL_PER_RECAL_EN_MASK (1 << 13)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_PER_RECAL_ST_SHIFT 15
+#define AM33XX_DPLL_PER_RECAL_ST_MASK (1 << 15)
+
+/* Used by RM_WKUP_RSTST */
+#define AM33XX_EMULATION_M3_RST_SHIFT 6
+#define AM33XX_EMULATION_M3_RST_MASK (1 << 6)
+
+/* Used by RM_MPU_RSTST */
+#define AM33XX_EMULATION_MPU_RST_SHIFT 5
+#define AM33XX_EMULATION_MPU_RST_MASK (1 << 5)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ENFUNC1_EXPORT_SHIFT 3
+#define AM33XX_ENFUNC1_EXPORT_MASK (1 << 3)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ENFUNC3_EXPORT_SHIFT 5
+#define AM33XX_ENFUNC3_EXPORT_MASK (1 << 5)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ENFUNC4_SHIFT 6
+#define AM33XX_ENFUNC4_MASK (1 << 6)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ENFUNC5_SHIFT 7
+#define AM33XX_ENFUNC5_MASK (1 << 7)
+
+/* Used by PRM_RSTST */
+#define AM33XX_EXTERNAL_WARM_RST_SHIFT 5
+#define AM33XX_EXTERNAL_WARM_RST_MASK (1 << 5)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_FORCEWKUP_EN_SHIFT 10
+#define AM33XX_FORCEWKUP_EN_MASK (1 << 10)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_FORCEWKUP_ST_SHIFT 10
+#define AM33XX_FORCEWKUP_ST_MASK (1 << 10)
+
+/* Used by PM_GFX_PWRSTCTRL */
+#define AM33XX_GFX_MEM_ONSTATE_SHIFT 17
+#define AM33XX_GFX_MEM_ONSTATE_MASK (0x3 << 17)
+
+/* Used by PM_GFX_PWRSTCTRL */
+#define AM33XX_GFX_MEM_RETSTATE_SHIFT 6
+#define AM33XX_GFX_MEM_RETSTATE_MASK (1 << 6)
+
+/* Used by PM_GFX_PWRSTST */
+#define AM33XX_GFX_MEM_STATEST_SHIFT 4
+#define AM33XX_GFX_MEM_STATEST_MASK (0x3 << 4)
+
+/* Used by RM_GFX_RSTCTRL, RM_GFX_RSTST */
+#define AM33XX_GFX_RST_SHIFT 0
+#define AM33XX_GFX_RST_MASK (1 << 0)
+
+/* Used by PRM_RSTST */
+#define AM33XX_GLOBAL_COLD_RST_SHIFT 0
+#define AM33XX_GLOBAL_COLD_RST_MASK (1 << 0)
+
+/* Used by PRM_RSTST */
+#define AM33XX_GLOBAL_WARM_SW_RST_SHIFT 1
+#define AM33XX_GLOBAL_WARM_SW_RST_MASK (1 << 1)
+
+/* Used by RM_WKUP_RSTST */
+#define AM33XX_ICECRUSHER_M3_RST_SHIFT 7
+#define AM33XX_ICECRUSHER_M3_RST_MASK (1 << 7)
+
+/* Used by RM_MPU_RSTST */
+#define AM33XX_ICECRUSHER_MPU_RST_SHIFT 6
+#define AM33XX_ICECRUSHER_MPU_RST_MASK (1 << 6)
+
+/* Used by PRM_RSTST */
+#define AM33XX_ICEPICK_RST_SHIFT 9
+#define AM33XX_ICEPICK_RST_MASK (1 << 9)
+
+/* Used by RM_PER_RSTCTRL */
+#define AM33XX_PRUSS_LRST_SHIFT 1
+#define AM33XX_PRUSS_LRST_MASK (1 << 1)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_PRUSS_MEM_ONSTATE_SHIFT 5
+#define AM33XX_PRUSS_MEM_ONSTATE_MASK (0x3 << 5)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_PRUSS_MEM_RETSTATE_SHIFT 7
+#define AM33XX_PRUSS_MEM_RETSTATE_MASK (1 << 7)
+
+/* Used by PM_PER_PWRSTST */
+#define AM33XX_PRUSS_MEM_STATEST_SHIFT 23
+#define AM33XX_PRUSS_MEM_STATEST_MASK (0x3 << 23)
+
+/*
+ * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST,
+ * PM_WKUP_PWRSTST, PM_RTC_PWRSTST
+ */
+#define AM33XX_INTRANSITION_SHIFT 20
+#define AM33XX_INTRANSITION_MASK (1 << 20)
+
+/* Used by PM_CEFUSE_PWRSTST */
+#define AM33XX_LASTPOWERSTATEENTERED_SHIFT 24
+#define AM33XX_LASTPOWERSTATEENTERED_MASK (0x3 << 24)
+
+/* Used by PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_RTC_PWRSTCTRL */
+#define AM33XX_LOGICRETSTATE_SHIFT 2
+#define AM33XX_LOGICRETSTATE_MASK (1 << 2)
+
+/* Renamed from LOGICRETSTATE Used by PM_PER_PWRSTCTRL, PM_WKUP_PWRSTCTRL */
+#define AM33XX_LOGICRETSTATE_3_3_SHIFT 3
+#define AM33XX_LOGICRETSTATE_3_3_MASK (1 << 3)
+
+/*
+ * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST,
+ * PM_WKUP_PWRSTST, PM_RTC_PWRSTST
+ */
+#define AM33XX_LOGICSTATEST_SHIFT 2
+#define AM33XX_LOGICSTATEST_MASK (1 << 2)
+
+/*
+ * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL,
+ * PM_MPU_PWRSTCTRL, PM_WKUP_PWRSTCTRL, PM_RTC_PWRSTCTRL
+ */
+#define AM33XX_LOWPOWERSTATECHANGE_SHIFT 4
+#define AM33XX_LOWPOWERSTATECHANGE_MASK (1 << 4)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_L1_ONSTATE_SHIFT 18
+#define AM33XX_MPU_L1_ONSTATE_MASK (0x3 << 18)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_L1_RETSTATE_SHIFT 22
+#define AM33XX_MPU_L1_RETSTATE_MASK (1 << 22)
+
+/* Used by PM_MPU_PWRSTST */
+#define AM33XX_MPU_L1_STATEST_SHIFT 6
+#define AM33XX_MPU_L1_STATEST_MASK (0x3 << 6)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_L2_ONSTATE_SHIFT 20
+#define AM33XX_MPU_L2_ONSTATE_MASK (0x3 << 20)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_L2_RETSTATE_SHIFT 23
+#define AM33XX_MPU_L2_RETSTATE_MASK (1 << 23)
+
+/* Used by PM_MPU_PWRSTST */
+#define AM33XX_MPU_L2_STATEST_SHIFT 8
+#define AM33XX_MPU_L2_STATEST_MASK (0x3 << 8)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_RAM_ONSTATE_SHIFT 16
+#define AM33XX_MPU_RAM_ONSTATE_MASK (0x3 << 16)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_RAM_RETSTATE_SHIFT 24
+#define AM33XX_MPU_RAM_RETSTATE_MASK (1 << 24)
+
+/* Used by PM_MPU_PWRSTST */
+#define AM33XX_MPU_RAM_STATEST_SHIFT 4
+#define AM33XX_MPU_RAM_STATEST_MASK (0x3 << 4)
+
+/* Used by PRM_RSTST */
+#define AM33XX_MPU_SECURITY_VIOL_RST_SHIFT 2
+#define AM33XX_MPU_SECURITY_VIOL_RST_MASK (1 << 2)
+
+/* Used by PRM_SRAM_COUNT */
+#define AM33XX_PCHARGECNT_VALUE_SHIFT 0
+#define AM33XX_PCHARGECNT_VALUE_MASK (0x3f << 0)
+
+/* Used by RM_PER_RSTCTRL */
+#define AM33XX_PCI_LRST_SHIFT 0
+#define AM33XX_PCI_LRST_MASK (1 << 0)
+
+/* Renamed from PCI_LRST Used by RM_PER_RSTST */
+#define AM33XX_PCI_LRST_5_5_SHIFT 5
+#define AM33XX_PCI_LRST_5_5_MASK (1 << 5)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_PER_MEM_ONSTATE_SHIFT 25
+#define AM33XX_PER_MEM_ONSTATE_MASK (0x3 << 25)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_PER_MEM_RETSTATE_SHIFT 29
+#define AM33XX_PER_MEM_RETSTATE_MASK (1 << 29)
+
+/* Used by PM_PER_PWRSTST */
+#define AM33XX_PER_MEM_STATEST_SHIFT 17
+#define AM33XX_PER_MEM_STATEST_MASK (0x3 << 17)
+
+/*
+ * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL,
+ * PM_MPU_PWRSTCTRL
+ */
+#define AM33XX_POWERSTATE_SHIFT 0
+#define AM33XX_POWERSTATE_MASK (0x3 << 0)
+
+/* Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST */
+#define AM33XX_POWERSTATEST_SHIFT 0
+#define AM33XX_POWERSTATEST_MASK (0x3 << 0)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_RAM_MEM_ONSTATE_SHIFT 30
+#define AM33XX_RAM_MEM_ONSTATE_MASK (0x3 << 30)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_RAM_MEM_RETSTATE_SHIFT 27
+#define AM33XX_RAM_MEM_RETSTATE_MASK (1 << 27)
+
+/* Used by PM_PER_PWRSTST */
+#define AM33XX_RAM_MEM_STATEST_SHIFT 21
+#define AM33XX_RAM_MEM_STATEST_MASK (0x3 << 21)
+
+/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
+#define AM33XX_RETMODE_ENABLE_SHIFT 0
+#define AM33XX_RETMODE_ENABLE_MASK (1 << 0)
+
+/* Used by REVISION_PRM */
+#define AM33XX_REV_SHIFT 0
+#define AM33XX_REV_MASK (0xff << 0)
+
+/* Used by PRM_RSTTIME */
+#define AM33XX_RSTTIME1_SHIFT 0
+#define AM33XX_RSTTIME1_MASK (0xff << 0)
+
+/* Used by PRM_RSTTIME */
+#define AM33XX_RSTTIME2_SHIFT 8
+#define AM33XX_RSTTIME2_MASK (0x1f << 8)
+
+/* Used by PRM_RSTCTRL */
+#define AM33XX_RST_GLOBAL_COLD_SW_SHIFT 1
+#define AM33XX_RST_GLOBAL_COLD_SW_MASK (1 << 1)
+
+/* Used by PRM_RSTCTRL */
+#define AM33XX_RST_GLOBAL_WARM_SW_SHIFT 0
+#define AM33XX_RST_GLOBAL_WARM_SW_MASK (1 << 0)
+
+/* Used by PRM_SRAM_COUNT */
+#define AM33XX_SLPCNT_VALUE_SHIFT 16
+#define AM33XX_SLPCNT_VALUE_MASK (0xff << 16)
+
+/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
+#define AM33XX_SRAMLDO_STATUS_SHIFT 8
+#define AM33XX_SRAMLDO_STATUS_MASK (1 << 8)
+
+/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
+#define AM33XX_SRAM_IN_TRANSITION_SHIFT 9
+#define AM33XX_SRAM_IN_TRANSITION_MASK (1 << 9)
+
+/* Used by PRM_SRAM_COUNT */
+#define AM33XX_STARTUP_COUNT_SHIFT 24
+#define AM33XX_STARTUP_COUNT_MASK (0xff << 24)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_TRANSITION_EN_SHIFT 8
+#define AM33XX_TRANSITION_EN_MASK (1 << 8)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_TRANSITION_ST_SHIFT 8
+#define AM33XX_TRANSITION_ST_MASK (1 << 8)
+
+/* Used by PRM_SRAM_COUNT */
+#define AM33XX_VSETUPCNT_VALUE_SHIFT 8
+#define AM33XX_VSETUPCNT_VALUE_MASK (0xff << 8)
+
+/* Used by PRM_RSTST */
+#define AM33XX_WDT0_RST_SHIFT 3
+#define AM33XX_WDT0_RST_MASK (1 << 3)
+
+/* Used by PRM_RSTST */
+#define AM33XX_WDT1_RST_SHIFT 4
+#define AM33XX_WDT1_RST_MASK (1 << 4)
+
+/* Used by RM_WKUP_RSTCTRL */
+#define AM33XX_WKUP_M3_LRST_SHIFT 3
+#define AM33XX_WKUP_M3_LRST_MASK (1 << 3)
+
+/* Renamed from WKUP_M3_LRST Used by RM_WKUP_RSTST */
+#define AM33XX_WKUP_M3_LRST_5_5_SHIFT 5
+#define AM33XX_WKUP_M3_LRST_5_5_MASK (1 << 5)
+
+#endif
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
new file mode 100644
index 0000000..7444855
--- /dev/null
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -0,0 +1,134 @@
+/*
+ * AM33XX PRM functions
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+
+#include "common.h"
+#include "prm33xx.h"
+#include "prm-regbits-33xx.h"
+
+/* Read a register in a PRM instance */
+u32 am33xx_prm_read_reg(s16 inst, u16 idx)
+{
+ return __raw_readl(prm_base + inst + idx);
+}
+
+/* Write into a register in a PRM instance */
+void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx)
+{
+ __raw_writel(val, prm_base + inst + idx);
+}
+
+/* Read-modify-write a register in PRM. Caller must lock */
+u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(inst, idx);
+ v &= ~mask;
+ v |= bits;
+ am33xx_prm_write_reg(v, inst, idx);
+
+ return v;
+}
+
+/**
+ * am33xx_prm_is_hardreset_asserted - read the HW reset line state of
+ * submodules contained in the hwmod module
+ * @shift: register bit shift corresponding to the reset line to check
+ * @inst: CM instance register offset (*_INST macro)
+ * @rstctrl_offs: RM_RSTCTRL register address offset for this module
+ *
+ * Returns 1 if the (sub)module hardreset line is currently asserted,
+ * 0 if the (sub)module hardreset line is not currently asserted, or
+ * -EINVAL upon parameter error.
+ */
+int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(inst, rstctrl_offs);
+ v &= 1 << shift;
+ v >>= shift;
+
+ return v;
+}
+
+/**
+ * am33xx_prm_assert_hardreset - assert the HW reset line of a submodule
+ * @shift: register bit shift corresponding to the reset line to assert
+ * @inst: CM instance register offset (*_INST macro)
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP. These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block. This function will
+ * place the submodule into reset. Returns 0 upon success or -EINVAL
+ * upon an argument error.
+ */
+int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs)
+{
+ u32 mask = 1 << shift;
+
+ am33xx_prm_rmw_reg_bits(mask, mask, inst, rstctrl_offs);
+
+ return 0;
+}
+
+/**
+ * am33xx_prm_deassert_hardreset - deassert a submodule hardreset line and
+ * wait
+ * @shift: register bit shift corresponding to the reset line to deassert
+ * @inst: CM instance register offset (*_INST macro)
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @rstst_reg: RM_RSTST register address for this module
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP. These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block. This function will
+ * take the submodule out of reset and wait until the PRCM indicates
+ * that the reset has completed before returning. Returns 0 upon success or
+ * -EINVAL upon an argument error, -EEXIST if the submodule was already out
+ * of reset, or -EBUSY if the submodule did not exit reset promptly.
+ */
+int am33xx_prm_deassert_hardreset(u8 shift, s16 inst,
+ u16 rstctrl_offs, u16 rstst_offs)
+{
+ int c;
+ u32 mask = 1 << shift;
+
+ /* Check the current status to avoid de-asserting the line twice */
+ if (am33xx_prm_is_hardreset_asserted(shift, inst, rstctrl_offs) == 0)
+ return -EEXIST;
+
+ /* Clear the reset status by writing 1 to the status bit */
+ am33xx_prm_rmw_reg_bits(0xffffffff, mask, inst, rstst_offs);
+ /* de-assert the reset control line */
+ am33xx_prm_rmw_reg_bits(mask, 0, inst, rstctrl_offs);
+ /* wait the status to be set */
+
+ omap_test_timeout(am33xx_prm_is_hardreset_asserted(shift, inst,
+ rstst_offs), MAX_MODULE_HARDRESET_WAIT, c);
+
+ return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
+}
diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h
new file mode 100644
index 0000000..3f25c56
--- /dev/null
+++ b/arch/arm/mach-omap2/prm33xx.h
@@ -0,0 +1,129 @@
+/*
+ * AM33XX PRM instance offset macros
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM33XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM33XX_H
+
+#include "prcm-common.h"
+#include "prm.h"
+
+#define AM33XX_PRM_BASE 0x44E00000
+
+#define AM33XX_PRM_REGADDR(inst, reg) \
+ AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRM_BASE + (inst) + (reg))
+
+
+/* PRM instances */
+#define AM33XX_PRM_OCP_SOCKET_MOD 0x0B00
+#define AM33XX_PRM_PER_MOD 0x0C00
+#define AM33XX_PRM_WKUP_MOD 0x0D00
+#define AM33XX_PRM_MPU_MOD 0x0E00
+#define AM33XX_PRM_DEVICE_MOD 0x0F00
+#define AM33XX_PRM_RTC_MOD 0x1000
+#define AM33XX_PRM_GFX_MOD 0x1100
+#define AM33XX_PRM_CEFUSE_MOD 0x1200
+
+/* PRM */
+
+/* PRM.OCP_SOCKET_PRM register offsets */
+#define AM33XX_REVISION_PRM_OFFSET 0x0000
+#define AM33XX_REVISION_PRM AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0000)
+#define AM33XX_PRM_IRQSTATUS_MPU_OFFSET 0x0004
+#define AM33XX_PRM_IRQSTATUS_MPU AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0004)
+#define AM33XX_PRM_IRQENABLE_MPU_OFFSET 0x0008
+#define AM33XX_PRM_IRQENABLE_MPU AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0008)
+#define AM33XX_PRM_IRQSTATUS_M3_OFFSET 0x000c
+#define AM33XX_PRM_IRQSTATUS_M3 AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x000c)
+#define AM33XX_PRM_IRQENABLE_M3_OFFSET 0x0010
+#define AM33XX_PRM_IRQENABLE_M3 AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0010)
+
+/* PRM.PER_PRM register offsets */
+#define AM33XX_RM_PER_RSTCTRL_OFFSET 0x0000
+#define AM33XX_RM_PER_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0000)
+#define AM33XX_RM_PER_RSTST_OFFSET 0x0004
+#define AM33XX_RM_PER_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0004)
+#define AM33XX_PM_PER_PWRSTST_OFFSET 0x0008
+#define AM33XX_PM_PER_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0008)
+#define AM33XX_PM_PER_PWRSTCTRL_OFFSET 0x000c
+#define AM33XX_PM_PER_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x000c)
+
+/* PRM.WKUP_PRM register offsets */
+#define AM33XX_RM_WKUP_RSTCTRL_OFFSET 0x0000
+#define AM33XX_RM_WKUP_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0000)
+#define AM33XX_PM_WKUP_PWRSTCTRL_OFFSET 0x0004
+#define AM33XX_PM_WKUP_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0004)
+#define AM33XX_PM_WKUP_PWRSTST_OFFSET 0x0008
+#define AM33XX_PM_WKUP_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0008)
+#define AM33XX_RM_WKUP_RSTST_OFFSET 0x000c
+#define AM33XX_RM_WKUP_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x000c)
+
+/* PRM.MPU_PRM register offsets */
+#define AM33XX_PM_MPU_PWRSTCTRL_OFFSET 0x0000
+#define AM33XX_PM_MPU_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0000)
+#define AM33XX_PM_MPU_PWRSTST_OFFSET 0x0004
+#define AM33XX_PM_MPU_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0004)
+#define AM33XX_RM_MPU_RSTST_OFFSET 0x0008
+#define AM33XX_RM_MPU_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0008)
+
+/* PRM.DEVICE_PRM register offsets */
+#define AM33XX_PRM_RSTCTRL_OFFSET 0x0000
+#define AM33XX_PRM_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0000)
+#define AM33XX_PRM_RSTTIME_OFFSET 0x0004
+#define AM33XX_PRM_RSTTIME AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0004)
+#define AM33XX_PRM_RSTST_OFFSET 0x0008
+#define AM33XX_PRM_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0008)
+#define AM33XX_PRM_SRAM_COUNT_OFFSET 0x000c
+#define AM33XX_PRM_SRAM_COUNT AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x000c)
+#define AM33XX_PRM_LDO_SRAM_CORE_SETUP_OFFSET 0x0010
+#define AM33XX_PRM_LDO_SRAM_CORE_SETUP AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0010)
+#define AM33XX_PRM_LDO_SRAM_CORE_CTRL_OFFSET 0x0014
+#define AM33XX_PRM_LDO_SRAM_CORE_CTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0014)
+#define AM33XX_PRM_LDO_SRAM_MPU_SETUP_OFFSET 0x0018
+#define AM33XX_PRM_LDO_SRAM_MPU_SETUP AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0018)
+#define AM33XX_PRM_LDO_SRAM_MPU_CTRL_OFFSET 0x001c
+#define AM33XX_PRM_LDO_SRAM_MPU_CTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x001c)
+
+/* PRM.RTC_PRM register offsets */
+#define AM33XX_PM_RTC_PWRSTCTRL_OFFSET 0x0000
+#define AM33XX_PM_RTC_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_RTC_MOD, 0x0000)
+#define AM33XX_PM_RTC_PWRSTST_OFFSET 0x0004
+#define AM33XX_PM_RTC_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_RTC_MOD, 0x0004)
+
+/* PRM.GFX_PRM register offsets */
+#define AM33XX_PM_GFX_PWRSTCTRL_OFFSET 0x0000
+#define AM33XX_PM_GFX_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0000)
+#define AM33XX_RM_GFX_RSTCTRL_OFFSET 0x0004
+#define AM33XX_RM_GFX_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0004)
+#define AM33XX_PM_GFX_PWRSTST_OFFSET 0x0010
+#define AM33XX_PM_GFX_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0010)
+#define AM33XX_RM_GFX_RSTST_OFFSET 0x0014
+#define AM33XX_RM_GFX_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0014)
+
+/* PRM.CEFUSE_PRM register offsets */
+#define AM33XX_PM_CEFUSE_PWRSTCTRL_OFFSET 0x0000
+#define AM33XX_PM_CEFUSE_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0000)
+#define AM33XX_PM_CEFUSE_PWRSTST_OFFSET 0x0004
+#define AM33XX_PM_CEFUSE_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004)
+
+extern u32 am33xx_prm_read_reg(s16 inst, u16 idx);
+extern void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx);
+extern u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
+extern void am33xx_prm_global_warm_sw_reset(void);
+extern int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst,
+ u16 rstctrl_offs);
+extern int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs);
+extern int am33xx_prm_deassert_hardreset(u8 shift, s16 inst,
+ u16 rstctrl_offs, u16 rstst_offs);
+#endif
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 4/6] ARM: OMAP AM33xx: CM: Introduce AM33xx CM APIs and register level details
2012-05-21 18:41 ` Paul Walmsley
@ 2012-05-21 18:42 ` Paul Walmsley
-1 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-05-21 18:42 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel
Cc: Kevin Hilman, Afzal Mohammed, Benoit Cousson, Tony Lindgren,
Rajendra Nayak, Vaibhav Bedia, Vaibhav Hiremath
From: Vaibhav Hiremath <hvaibhav@ti.com>
As far as PRM/CM/PRCM modules are concerned, AM33XX device is
different than OMAP3 and OMAP4 architectures; so similar to
PRM implementation, handle AM33XX CM separately.
This patch introduces AM33XX CM module low-level api's, used and
required by omap clockdomain and hwmod framework.
Please note that cm-regbits-33xx.h (register bit field offset)
and cm33xx.h (register addr offset) files are mostly auto generated.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
CC: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
[paul@pwsan.com: split the hwmod code changes in this patch into a separate
patch; updated for 3.5]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/Makefile | 2
arch/arm/mach-omap2/cm-regbits-33xx.h | 687 +++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/cm33xx.c | 313 +++++++++++++++
arch/arm/mach-omap2/cm33xx.h | 420 ++++++++++++++++++++
4 files changed, 1421 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-omap2/cm-regbits-33xx.h
create mode 100644 arch/arm/mach-omap2/cm33xx.c
create mode 100644 arch/arm/mach-omap2/cm33xx.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 32aed2d..8e23151 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -91,7 +91,7 @@ obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += prcm.o cminst44xx.o cm44xx.o
obj-$(CONFIG_ARCH_OMAP4) += prcm_mpu44xx.o prminst44xx.o
obj-$(CONFIG_ARCH_OMAP4) += vc44xx_data.o vp44xx_data.o prm44xx.o
-obj-$(CONFIG_SOC_AM33XX) += prcm.o prm33xx.o
+obj-$(CONFIG_SOC_AM33XX) += prcm.o prm33xx.o cm33xx.o
# OMAP voltage domains
voltagedomain-common := voltage.o vc.o vp.o
diff --git a/arch/arm/mach-omap2/cm-regbits-33xx.h b/arch/arm/mach-omap2/cm-regbits-33xx.h
new file mode 100644
index 0000000..532027e
--- /dev/null
+++ b/arch/arm/mach-omap2/cm-regbits-33xx.h
@@ -0,0 +1,687 @@
+/*
+ * AM33XX Power Management register bits
+ *
+ * This file is automatically generated from the AM33XX hardware databases.
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H
+
+/*
+ * Used by CM_AUTOIDLE_DPLL_CORE, CM_AUTOIDLE_DPLL_DDR, CM_AUTOIDLE_DPLL_DISP,
+ * CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER
+ */
+#define AM33XX_AUTO_DPLL_MODE_SHIFT 0
+#define AM33XX_AUTO_DPLL_MODE_MASK (0x7 << 0)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_ADC_FCLK_SHIFT 14
+#define AM33XX_CLKACTIVITY_ADC_FCLK_MASK (1 << 16)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CAN_CLK_SHIFT 11
+#define AM33XX_CLKACTIVITY_CAN_CLK_MASK (1 << 11)
+
+/* Used by CM_PER_CLK_24MHZ_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_CPSW_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_L4HS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_L4HS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_SHIFT 5
+#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_MASK (1 << 5)
+
+/* Used by CM_PER_L4HS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_SHIFT 6
+#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_MASK (1 << 6)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_SHIFT 6
+#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_MASK (1 << 6)
+
+/* Used by CM_CEFUSE_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT 9
+#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK (1 << 9)
+
+/* Used by CM_L3_AON_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_DBGSYSCLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_DBGSYSCLK_MASK (1 << 2)
+
+/* Used by CM_L3_AON_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_DEBUG_CLKA_SHIFT 4
+#define AM33XX_CLKACTIVITY_DEBUG_CLKA_MASK (1 << 4)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_EMIF_GCLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_EMIF_GCLK_MASK (1 << 2)
+
+/* Used by CM_GFX_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GFX_FCLK_SHIFT 9
+#define AM33XX_CLKACTIVITY_GFX_FCLK_MASK (1 << 9)
+
+/* Used by CM_GFX_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_MASK (1 << 8)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_MASK (1 << 8)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_SHIFT 19
+#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_MASK (1 << 19)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_SHIFT 20
+#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_MASK (1 << 20)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_SHIFT 21
+#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_MASK (1 << 21)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_SHIFT 22
+#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_MASK (1 << 22)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_SHIFT 26
+#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_MASK (1 << 26)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_SHIFT 18
+#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_I2C0_GFCLK_SHIFT 11
+#define AM33XX_CLKACTIVITY_I2C0_GFCLK_MASK (1 << 11)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_I2C_FCLK_SHIFT 24
+#define AM33XX_CLKACTIVITY_I2C_FCLK_MASK (1 << 24)
+
+/* Used by CM_PER_PRUSS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_SHIFT 5
+#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_MASK (1 << 5)
+
+/* Used by CM_PER_PRUSS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_PRUSS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_SHIFT 6
+#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_MASK (1 << 6)
+
+/* Used by CM_PER_L3S_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L3S_GCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_L3S_GCLK_MASK (1 << 3)
+
+/* Used by CM_L3_AON_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L3_AON_GCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_L3_AON_GCLK_MASK (1 << 3)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L3_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_L3_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_L4FW_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4FW_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4FW_GCLK_MASK (1 << 8)
+
+/* Used by CM_PER_L4HS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4HS_GCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_L4HS_GCLK_MASK (1 << 3)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4LS_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4LS_GCLK_MASK (1 << 8)
+
+/* Used by CM_GFX_L4LS_GFX_CLKSTCTRL__1 */
+#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_MASK (1 << 8)
+
+/* Used by CM_CEFUSE_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_MASK (1 << 8)
+
+/* Used by CM_RTC_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_MASK (1 << 8)
+
+/* Used by CM_L4_WKUP_AON_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_MASK (1 << 2)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_MASK (1 << 2)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_LCDC_GCLK_SHIFT 17
+#define AM33XX_CLKACTIVITY_LCDC_GCLK_MASK (1 << 17)
+
+/* Used by CM_PER_LCDC_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_LCDC_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_SHIFT 5
+#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_MASK (1 << 5)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_MCASP_GCLK_SHIFT 7
+#define AM33XX_CLKACTIVITY_MCASP_GCLK_MASK (1 << 7)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_MMC_FCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_MMC_FCLK_MASK (1 << 3)
+
+/* Used by CM_MPU_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_MPU_CLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_MPU_CLK_MASK (1 << 2)
+
+/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_SHIFT 5
+#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_MASK (1 << 5)
+
+/* Used by CM_RTC_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_RTC_32KCLK_SHIFT 9
+#define AM33XX_CLKACTIVITY_RTC_32KCLK_MASK (1 << 9)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_SPI_GCLK_SHIFT 25
+#define AM33XX_CLKACTIVITY_SPI_GCLK_MASK (1 << 25)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_SR_SYSCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_SR_SYSCLK_MASK (1 << 3)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER0_GCLK_SHIFT 10
+#define AM33XX_CLKACTIVITY_TIMER0_GCLK_MASK (1 << 10)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER1_GCLK_SHIFT 13
+#define AM33XX_CLKACTIVITY_TIMER1_GCLK_MASK (1 << 13)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER2_GCLK_SHIFT 14
+#define AM33XX_CLKACTIVITY_TIMER2_GCLK_MASK (1 << 14)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER3_GCLK_SHIFT 15
+#define AM33XX_CLKACTIVITY_TIMER3_GCLK_MASK (1 << 15)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER4_GCLK_SHIFT 16
+#define AM33XX_CLKACTIVITY_TIMER4_GCLK_MASK (1 << 16)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER5_GCLK_SHIFT 27
+#define AM33XX_CLKACTIVITY_TIMER5_GCLK_MASK (1 << 27)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER6_GCLK_SHIFT 28
+#define AM33XX_CLKACTIVITY_TIMER6_GCLK_MASK (1 << 28)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER7_GCLK_SHIFT 13
+#define AM33XX_CLKACTIVITY_TIMER7_GCLK_MASK (1 << 13)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_UART0_GFCLK_SHIFT 12
+#define AM33XX_CLKACTIVITY_UART0_GFCLK_MASK (1 << 12)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_UART_GFCLK_SHIFT 10
+#define AM33XX_CLKACTIVITY_UART_GFCLK_MASK (1 << 10)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_WDT0_GCLK_SHIFT 9
+#define AM33XX_CLKACTIVITY_WDT0_GCLK_MASK (1 << 9)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_WDT1_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_WDT1_GCLK_MASK (1 << 4)
+
+/* Used by CLKSEL_GFX_FCLK */
+#define AM33XX_CLKDIV_SEL_GFX_FCLK_SHIFT 0
+#define AM33XX_CLKDIV_SEL_GFX_FCLK_MASK (1 << 0)
+
+/* Used by CM_CLKOUT_CTRL */
+#define AM33XX_CLKOUT2DIV_SHIFT 3
+#define AM33XX_CLKOUT2DIV_MASK (0x05 << 3)
+
+/* Used by CM_CLKOUT_CTRL */
+#define AM33XX_CLKOUT2EN_SHIFT 7
+#define AM33XX_CLKOUT2EN_MASK (1 << 7)
+
+/* Used by CM_CLKOUT_CTRL */
+#define AM33XX_CLKOUT2SOURCE_SHIFT 0
+#define AM33XX_CLKOUT2SOURCE_MASK (0x02 << 0)
+
+/*
+ * Used by CLKSEL_GPIO0_DBCLK, CLKSEL_LCDC_PIXEL_CLK, CLKSEL_TIMER2_CLK,
+ * CLKSEL_TIMER3_CLK, CLKSEL_TIMER4_CLK, CLKSEL_TIMER5_CLK, CLKSEL_TIMER6_CLK,
+ * CLKSEL_TIMER7_CLK
+ */
+#define AM33XX_CLKSEL_SHIFT 0
+#define AM33XX_CLKSEL_MASK (0x01 << 0)
+
+/*
+ * Renamed from CLKSEL Used by CLKSEL_PRUSS_OCP_CLK, CLKSEL_WDT1_CLK,
+ * CM_CPTS_RFT_CLKSEL
+ */
+#define AM33XX_CLKSEL_0_0_SHIFT 0
+#define AM33XX_CLKSEL_0_0_MASK (1 << 0)
+
+#define AM33XX_CLKSEL_0_1_SHIFT 0
+#define AM33XX_CLKSEL_0_1_MASK (3 << 0)
+
+/* Renamed from CLKSEL Used by CLKSEL_TIMER1MS_CLK */
+#define AM33XX_CLKSEL_0_2_SHIFT 0
+#define AM33XX_CLKSEL_0_2_MASK (7 << 0)
+
+/* Used by CLKSEL_GFX_FCLK */
+#define AM33XX_CLKSEL_GFX_FCLK_SHIFT 1
+#define AM33XX_CLKSEL_GFX_FCLK_MASK (1 << 1)
+
+/*
+ * Used by CM_MPU_CLKSTCTRL, CM_RTC_CLKSTCTRL, CM_PER_CLK_24MHZ_CLKSTCTRL,
+ * CM_PER_CPSW_CLKSTCTRL, CM_PER_PRUSS_CLKSTCTRL, CM_PER_L3S_CLKSTCTRL,
+ * CM_PER_L3_CLKSTCTRL, CM_PER_L4FW_CLKSTCTRL, CM_PER_L4HS_CLKSTCTRL,
+ * CM_PER_L4LS_CLKSTCTRL, CM_PER_LCDC_CLKSTCTRL, CM_PER_OCPWP_L3_CLKSTCTRL,
+ * CM_L3_AON_CLKSTCTRL, CM_L4_WKUP_AON_CLKSTCTRL, CM_WKUP_CLKSTCTRL,
+ * CM_GFX_L3_CLKSTCTRL, CM_GFX_L4LS_GFX_CLKSTCTRL__1, CM_CEFUSE_CLKSTCTRL
+ */
+#define AM33XX_CLKTRCTRL_SHIFT 0
+#define AM33XX_CLKTRCTRL_MASK (0x3 << 0)
+
+/*
+ * Used by CM_SSC_DELTAMSTEP_DPLL_CORE, CM_SSC_DELTAMSTEP_DPLL_DDR,
+ * CM_SSC_DELTAMSTEP_DPLL_DISP, CM_SSC_DELTAMSTEP_DPLL_MPU,
+ * CM_SSC_DELTAMSTEP_DPLL_PER
+ */
+#define AM33XX_DELTAMSTEP_SHIFT 0
+#define AM33XX_DELTAMSTEP_MASK (0x19 << 0)
+
+/* Used by CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, CM_CLKSEL_DPLL_MPU */
+#define AM33XX_DPLL_BYP_CLKSEL_SHIFT 23
+#define AM33XX_DPLL_BYP_CLKSEL_MASK (1 << 23)
+
+/* Used by CM_CLKDCOLDO_DPLL_PER */
+#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT 8
+#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_MASK (1 << 8)
+
+/* Used by CM_CLKDCOLDO_DPLL_PER */
+#define AM33XX_DPLL_CLKDCOLDO_PWDN_SHIFT 12
+#define AM33XX_DPLL_CLKDCOLDO_PWDN_MASK (1 << 12)
+
+/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
+#define AM33XX_DPLL_CLKOUT_DIV_SHIFT 0
+#define AM33XX_DPLL_CLKOUT_DIV_MASK (0x1f << 0)
+
+/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_PER */
+#define AM33XX_DPLL_CLKOUT_DIV_0_6_SHIFT 0
+#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK (0x06 << 0)
+
+/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_SHIFT 5
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_MASK (1 << 5)
+
+/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_PER */
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_SHIFT 7
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_MASK (1 << 7)
+
+/*
+ * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU,
+ * CM_DIV_M2_DPLL_PER
+ */
+#define AM33XX_DPLL_CLKOUT_GATE_CTRL_SHIFT 8
+#define AM33XX_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8)
+
+/*
+ * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP,
+ * CM_CLKSEL_DPLL_MPU
+ */
+#define AM33XX_DPLL_DIV_SHIFT 0
+#define AM33XX_DPLL_DIV_MASK (0x7f << 0)
+
+#define AM33XX_DPLL_PER_DIV_MASK (0xff << 0)
+
+/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_PERIPH */
+#define AM33XX_DPLL_DIV_0_7_SHIFT 0
+#define AM33XX_DPLL_DIV_0_7_MASK (0x07 << 0)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU
+ */
+#define AM33XX_DPLL_DRIFTGUARD_EN_SHIFT 8
+#define AM33XX_DPLL_DRIFTGUARD_EN_MASK (1 << 8)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
+ */
+#define AM33XX_DPLL_EN_SHIFT 0
+#define AM33XX_DPLL_EN_MASK (0x7 << 0)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU
+ */
+#define AM33XX_DPLL_LPMODE_EN_SHIFT 10
+#define AM33XX_DPLL_LPMODE_EN_MASK (1 << 10)
+
+/*
+ * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP,
+ * CM_CLKSEL_DPLL_MPU
+ */
+#define AM33XX_DPLL_MULT_SHIFT 8
+#define AM33XX_DPLL_MULT_MASK (0x7ff << 8)
+
+/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_PERIPH */
+#define AM33XX_DPLL_MULT_PERIPH_SHIFT 8
+#define AM33XX_DPLL_MULT_PERIPH_MASK (0xfff << 8)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU
+ */
+#define AM33XX_DPLL_REGM4XEN_SHIFT 11
+#define AM33XX_DPLL_REGM4XEN_MASK (1 << 11)
+
+/* Used by CM_CLKSEL_DPLL_PERIPH */
+#define AM33XX_DPLL_SD_DIV_SHIFT 24
+#define AM33XX_DPLL_SD_DIV_MASK (24, 31)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
+ */
+#define AM33XX_DPLL_SSC_ACK_SHIFT 13
+#define AM33XX_DPLL_SSC_ACK_MASK (1 << 13)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
+ */
+#define AM33XX_DPLL_SSC_DOWNSPREAD_SHIFT 14
+#define AM33XX_DPLL_SSC_DOWNSPREAD_MASK (1 << 14)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
+ */
+#define AM33XX_DPLL_SSC_EN_SHIFT 12
+#define AM33XX_DPLL_SSC_EN_MASK (1 << 12)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT 0
+#define AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK (0x1f << 0)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT 5
+#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_MASK (1 << 5)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT 8
+#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK (1 << 8)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_SHIFT 12
+#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_MASK (1 << 12)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT 0
+#define AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK (0x1f << 0)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT 5
+#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_MASK (1 << 5)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT 8
+#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK (1 << 8)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_SHIFT 12
+#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_MASK (1 << 12)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT 0
+#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK (0x04 << 0)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT 5
+#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_MASK (1 << 5)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT 8
+#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK (1 << 8)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_SHIFT 12
+#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_MASK (1 << 12)
+
+/*
+ * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL,
+ * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL,
+ * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL,
+ * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL,
+ * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL,
+ * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL,
+ * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL,
+ * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL,
+ * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL,
+ * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL,
+ * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL,
+ * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL,
+ * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL,
+ * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL,
+ * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
+ * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL,
+ * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL,
+ * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL,
+ * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL,
+ * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL,
+ * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL,
+ * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
+ * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL,
+ * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL,
+ * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL,
+ * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL,
+ * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL,
+ * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL,
+ * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL,
+ * CM_WKUP_WDT1_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL,
+ * CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL
+ */
+#define AM33XX_IDLEST_SHIFT 16
+#define AM33XX_IDLEST_MASK (0x3 << 16)
+#define AM33XX_IDLEST_VAL 0x3
+
+/* Used by CM_MAC_CLKSEL */
+#define AM33XX_MII_CLK_SEL_SHIFT 2
+#define AM33XX_MII_CLK_SEL_MASK (1 << 2)
+
+/*
+ * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR,
+ * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU,
+ * CM_SSC_MODFREQDIV_DPLL_PER
+ */
+#define AM33XX_MODFREQDIV_EXPONENT_SHIFT 8
+#define AM33XX_MODFREQDIV_EXPONENT_MASK (0x10 << 8)
+
+/*
+ * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR,
+ * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU,
+ * CM_SSC_MODFREQDIV_DPLL_PER
+ */
+#define AM33XX_MODFREQDIV_MANTISSA_SHIFT 0
+#define AM33XX_MODFREQDIV_MANTISSA_MASK (0x06 << 0)
+
+/*
+ * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL,
+ * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL,
+ * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL,
+ * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL,
+ * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL,
+ * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL,
+ * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL,
+ * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL,
+ * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL,
+ * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL,
+ * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL,
+ * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL,
+ * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL,
+ * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL,
+ * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
+ * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL,
+ * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL,
+ * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL,
+ * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL,
+ * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL,
+ * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL,
+ * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
+ * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL,
+ * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL,
+ * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL,
+ * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL,
+ * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL,
+ * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL,
+ * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL,
+ * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL,
+ * CM_GFX_GFX_CLKCTRL, CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL,
+ * CM_CEFUSE_CEFUSE_CLKCTRL
+ */
+#define AM33XX_MODULEMODE_SHIFT 0
+#define AM33XX_MODULEMODE_MASK (0x3 << 0)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_OPTCLK_DEBUG_CLKA_SHIFT 30
+#define AM33XX_OPTCLK_DEBUG_CLKA_MASK (1 << 30)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT 19
+#define AM33XX_OPTFCLKEN_DBGSYSCLK_MASK (1 << 19)
+
+/* Used by CM_WKUP_GPIO0_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO1_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO2_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO3_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO4_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO5_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO6_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_MASK (1 << 18)
+
+/*
+ * Used by CM_MPU_MPU_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL, CM_PER_PRUSS_CLKCTRL,
+ * CM_PER_IEEE5000_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MLB_CLKCTRL,
+ * CM_PER_MSTR_EXPS_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
+ * CM_PER_SPARE_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
+ * CM_PER_TPTC2_CLKCTRL, CM_PER_USB0_CLKCTRL, CM_WKUP_DEBUGSS_CLKCTRL,
+ * CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL
+ */
+#define AM33XX_STBYST_SHIFT 18
+#define AM33XX_STBYST_MASK (1 << 18)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_STM_PMD_CLKDIVSEL_SHIFT 27
+#define AM33XX_STM_PMD_CLKDIVSEL_MASK (0x29 << 27)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_STM_PMD_CLKSEL_SHIFT 22
+#define AM33XX_STM_PMD_CLKSEL_MASK (0x23 << 22)
+
+/*
+ * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP,
+ * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
+ */
+#define AM33XX_ST_DPLL_CLK_SHIFT 0
+#define AM33XX_ST_DPLL_CLK_MASK (1 << 0)
+
+/* Used by CM_CLKDCOLDO_DPLL_PER */
+#define AM33XX_ST_DPLL_CLKDCOLDO_SHIFT 8
+#define AM33XX_ST_DPLL_CLKDCOLDO_MASK (1 << 8)
+
+/*
+ * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU,
+ * CM_DIV_M2_DPLL_PER
+ */
+#define AM33XX_ST_DPLL_CLKOUT_SHIFT 9
+#define AM33XX_ST_DPLL_CLKOUT_MASK (1 << 9)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_ST_HSDIVIDER_CLKOUT1_SHIFT 9
+#define AM33XX_ST_HSDIVIDER_CLKOUT1_MASK (1 << 9)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_ST_HSDIVIDER_CLKOUT2_SHIFT 9
+#define AM33XX_ST_HSDIVIDER_CLKOUT2_MASK (1 << 9)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_ST_HSDIVIDER_CLKOUT3_SHIFT 9
+#define AM33XX_ST_HSDIVIDER_CLKOUT3_MASK (1 << 9)
+
+/*
+ * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP,
+ * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
+ */
+#define AM33XX_ST_MN_BYPASS_SHIFT 8
+#define AM33XX_ST_MN_BYPASS_MASK (1 << 8)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_TRC_PMD_CLKDIVSEL_SHIFT 24
+#define AM33XX_TRC_PMD_CLKDIVSEL_MASK (0x26 << 24)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_TRC_PMD_CLKSEL_SHIFT 20
+#define AM33XX_TRC_PMD_CLKSEL_MASK (0x21 << 20)
+
+/* Used by CONTROL_SEC_CLK_CTRL */
+#define AM33XX_TIMER0_CLKSEL_MASK (0x3 << 4)
+#endif
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
new file mode 100644
index 0000000..13f56ea
--- /dev/null
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -0,0 +1,313 @@
+/*
+ * AM33XX CM functions
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Reference taken from from OMAP4 cminst44xx.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+
+#include "cm.h"
+#include "cm33xx.h"
+#include "cm-regbits-34xx.h"
+#include "cm-regbits-33xx.h"
+#include "prm33xx.h"
+
+/*
+ * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield:
+ *
+ * 0x0 func: Module is fully functional, including OCP
+ * 0x1 trans: Module is performing transition: wakeup, or sleep, or sleep
+ * abortion
+ * 0x2 idle: Module is in Idle mode (only OCP part). It is functional if
+ * using separate functional clock
+ * 0x3 disabled: Module is disabled and cannot be accessed
+ *
+ */
+#define CLKCTRL_IDLEST_FUNCTIONAL 0x0
+#define CLKCTRL_IDLEST_INTRANSITION 0x1
+#define CLKCTRL_IDLEST_INTERFACE_IDLE 0x2
+#define CLKCTRL_IDLEST_DISABLED 0x3
+
+/* Private functions */
+
+/* Read a register in a CM instance */
+static inline u32 am33xx_cm_read_reg(s16 inst, u16 idx)
+{
+ return __raw_readl(cm_base + inst + idx);
+}
+
+/* Write into a register in a CM */
+static inline void am33xx_cm_write_reg(u32 val, s16 inst, u16 idx)
+{
+ __raw_writel(val, cm_base + inst + idx);
+}
+
+/* Read-modify-write a register in CM */
+static inline u32 am33xx_cm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, idx);
+ v &= ~mask;
+ v |= bits;
+ am33xx_cm_write_reg(v, inst, idx);
+
+ return v;
+}
+
+static inline u32 am33xx_cm_set_reg_bits(u32 bits, s16 inst, s16 idx)
+{
+ return am33xx_cm_rmw_reg_bits(bits, bits, inst, idx);
+}
+
+static inline u32 am33xx_cm_clear_reg_bits(u32 bits, s16 inst, s16 idx)
+{
+ return am33xx_cm_rmw_reg_bits(bits, 0x0, inst, idx);
+}
+
+static inline u32 am33xx_cm_read_reg_bits(u16 inst, s16 idx, u32 mask)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, idx);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return v;
+}
+
+/**
+ * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to
+ * bit 0.
+ */
+static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ u32 v = am33xx_cm_read_reg(inst, clkctrl_offs);
+ v &= AM33XX_IDLEST_MASK;
+ v >>= AM33XX_IDLEST_SHIFT;
+ return v;
+}
+
+/**
+ * _is_module_ready - can module registers be accessed without causing an abort?
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either
+ * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise.
+ */
+static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ u32 v;
+
+ v = _clkctrl_idlest(inst, cdoffs, clkctrl_offs);
+
+ return (v == CLKCTRL_IDLEST_FUNCTIONAL ||
+ v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false;
+}
+
+/**
+ * _clktrctrl_write - write @c to a CM_CLKSTCTRL.CLKTRCTRL register bitfield
+ * @c: CLKTRCTRL register bitfield (LSB = bit 0, i.e., unshifted)
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * @c must be the unshifted value for CLKTRCTRL - i.e., this function
+ * will handle the shift itself.
+ */
+static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, cdoffs);
+ v &= ~AM33XX_CLKTRCTRL_MASK;
+ v |= c << AM33XX_CLKTRCTRL_SHIFT;
+ am33xx_cm_write_reg(v, inst, cdoffs);
+}
+
+/* Public functions */
+
+/**
+ * am33xx_cm_is_clkdm_in_hwsup - is a clockdomain in hwsup idle mode?
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Returns true if the clockdomain referred to by (@inst, @cdoffs)
+ * is in hardware-supervised idle mode, or 0 otherwise.
+ */
+bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, cdoffs);
+ v &= AM33XX_CLKTRCTRL_MASK;
+ v >>= AM33XX_CLKTRCTRL_SHIFT;
+
+ return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? true : false;
+}
+
+/**
+ * am33xx_cm_clkdm_enable_hwsup - put a clockdomain in hwsup-idle mode
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Put a clockdomain referred to by (@inst, @cdoffs) into
+ * hardware-supervised idle mode. No return value.
+ */
+void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs)
+{
+ _clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs);
+}
+
+/**
+ * am33xx_cm_clkdm_disable_hwsup - put a clockdomain in swsup-idle mode
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Put a clockdomain referred to by (@inst, @cdoffs) into
+ * software-supervised idle mode, i.e., controlled manually by the
+ * Linux OMAP clockdomain code. No return value.
+ */
+void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs)
+{
+ _clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs);
+}
+
+/**
+ * am33xx_cm_clkdm_force_sleep - try to put a clockdomain into idle
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Put a clockdomain referred to by (@inst, @cdoffs) into idle
+ * No return value.
+ */
+void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs)
+{
+ _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs);
+}
+
+/**
+ * am33xx_cm_clkdm_force_wakeup - try to take a clockdomain out of idle
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Take a clockdomain referred to by (@inst, @cdoffs) out of idle,
+ * waking it up. No return value.
+ */
+void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs)
+{
+ _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs);
+}
+
+/*
+ *
+ */
+
+/**
+ * am33xx_cm_wait_module_ready - wait for a module to be in 'func' state
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Wait for the module IDLEST to be functional. If the idle state is in any
+ * the non functional state (trans, idle or disabled), module and thus the
+ * sysconfig cannot be accessed and will probably lead to an "imprecise
+ * external abort"
+ */
+int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ int i = 0;
+
+ if (!clkctrl_offs)
+ return 0;
+
+ omap_test_timeout(_is_module_ready(inst, cdoffs, clkctrl_offs),
+ MAX_MODULE_READY_TIME, i);
+
+ return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
+/**
+ * am33xx_cm_wait_module_idle - wait for a module to be in 'disabled'
+ * state
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Wait for the module IDLEST to be disabled. Some PRCM transition,
+ * like reset assertion or parent clock de-activation must wait the
+ * module to be fully disabled.
+ */
+int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ int i = 0;
+
+ if (!clkctrl_offs)
+ return 0;
+
+ omap_test_timeout((_clkctrl_idlest(inst, cdoffs, clkctrl_offs) ==
+ CLKCTRL_IDLEST_DISABLED),
+ MAX_MODULE_READY_TIME, i);
+
+ return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
+/**
+ * am33xx_cm_module_enable - Enable the modulemode inside CLKCTRL
+ * @mode: Module mode (SW or HW)
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * No return value.
+ */
+void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, clkctrl_offs);
+ v &= ~AM33XX_MODULEMODE_MASK;
+ v |= mode << AM33XX_MODULEMODE_SHIFT;
+ am33xx_cm_write_reg(v, inst, clkctrl_offs);
+}
+
+/**
+ * am33xx_cm_module_disable - Disable the module inside CLKCTRL
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * No return value.
+ */
+void am33xx_cm_module_disable(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, clkctrl_offs);
+ v &= ~AM33XX_MODULEMODE_MASK;
+ am33xx_cm_write_reg(v, inst, clkctrl_offs);
+}
diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h
new file mode 100644
index 0000000..5fa0b62
--- /dev/null
+++ b/arch/arm/mach-omap2/cm33xx.h
@@ -0,0 +1,420 @@
+/*
+ * AM33XX CM offset macros
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_33XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_33XX_H
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include "common.h"
+
+#include "cm.h"
+#include "cm-regbits-33xx.h"
+#include "cm33xx.h"
+
+/* CM base address */
+#define AM33XX_CM_BASE 0x44e00000
+
+#define AM33XX_CM_REGADDR(inst, reg) \
+ AM33XX_L4_WK_IO_ADDRESS(AM33XX_CM_BASE + (inst) + (reg))
+
+/* CM instances */
+#define AM33XX_CM_PER_MOD 0x0000
+#define AM33XX_CM_WKUP_MOD 0x0400
+#define AM33XX_CM_DPLL_MOD 0x0500
+#define AM33XX_CM_MPU_MOD 0x0600
+#define AM33XX_CM_DEVICE_MOD 0x0700
+#define AM33XX_CM_RTC_MOD 0x0800
+#define AM33XX_CM_GFX_MOD 0x0900
+#define AM33XX_CM_CEFUSE_MOD 0x0A00
+
+/* CM */
+
+/* CM.PER_CM register offsets */
+#define AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET 0x0000
+#define AM33XX_CM_PER_L4LS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0000)
+#define AM33XX_CM_PER_L3S_CLKSTCTRL_OFFSET 0x0004
+#define AM33XX_CM_PER_L3S_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0004)
+#define AM33XX_CM_PER_L4FW_CLKSTCTRL_OFFSET 0x0008
+#define AM33XX_CM_PER_L4FW_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0008)
+#define AM33XX_CM_PER_L3_CLKSTCTRL_OFFSET 0x000c
+#define AM33XX_CM_PER_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x000c)
+#define AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET 0x0014
+#define AM33XX_CM_PER_CPGMAC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0014)
+#define AM33XX_CM_PER_LCDC_CLKCTRL_OFFSET 0x0018
+#define AM33XX_CM_PER_LCDC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0018)
+#define AM33XX_CM_PER_USB0_CLKCTRL_OFFSET 0x001c
+#define AM33XX_CM_PER_USB0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x001c)
+#define AM33XX_CM_PER_MLB_CLKCTRL_OFFSET 0x0020
+#define AM33XX_CM_PER_MLB_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0020)
+#define AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET 0x0024
+#define AM33XX_CM_PER_TPTC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0024)
+#define AM33XX_CM_PER_EMIF_CLKCTRL_OFFSET 0x0028
+#define AM33XX_CM_PER_EMIF_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0028)
+#define AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET 0x002c
+#define AM33XX_CM_PER_OCMCRAM_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x002c)
+#define AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET 0x0030
+#define AM33XX_CM_PER_GPMC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0030)
+#define AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET 0x0034
+#define AM33XX_CM_PER_MCASP0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0034)
+#define AM33XX_CM_PER_UART5_CLKCTRL_OFFSET 0x0038
+#define AM33XX_CM_PER_UART5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0038)
+#define AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET 0x003c
+#define AM33XX_CM_PER_MMC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x003c)
+#define AM33XX_CM_PER_ELM_CLKCTRL_OFFSET 0x0040
+#define AM33XX_CM_PER_ELM_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0040)
+#define AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET 0x0044
+#define AM33XX_CM_PER_I2C2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0044)
+#define AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET 0x0048
+#define AM33XX_CM_PER_I2C1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0048)
+#define AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET 0x004c
+#define AM33XX_CM_PER_SPI0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x004c)
+#define AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET 0x0050
+#define AM33XX_CM_PER_SPI1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0050)
+#define AM33XX_CM_PER_SPI2_CLKCTRL_OFFSET 0x0054
+#define AM33XX_CM_PER_SPI2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0054)
+#define AM33XX_CM_PER_SPI3_CLKCTRL_OFFSET 0x0058
+#define AM33XX_CM_PER_SPI3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0058)
+#define AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET 0x0060
+#define AM33XX_CM_PER_L4LS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0060)
+#define AM33XX_CM_PER_L4FW_CLKCTRL_OFFSET 0x0064
+#define AM33XX_CM_PER_L4FW_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0064)
+#define AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET 0x0068
+#define AM33XX_CM_PER_MCASP1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0068)
+#define AM33XX_CM_PER_UART1_CLKCTRL_OFFSET 0x006c
+#define AM33XX_CM_PER_UART1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x006c)
+#define AM33XX_CM_PER_UART2_CLKCTRL_OFFSET 0x0070
+#define AM33XX_CM_PER_UART2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0070)
+#define AM33XX_CM_PER_UART3_CLKCTRL_OFFSET 0x0074
+#define AM33XX_CM_PER_UART3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0074)
+#define AM33XX_CM_PER_UART4_CLKCTRL_OFFSET 0x0078
+#define AM33XX_CM_PER_UART4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0078)
+#define AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET 0x007c
+#define AM33XX_CM_PER_TIMER7_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x007c)
+#define AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET 0x0080
+#define AM33XX_CM_PER_TIMER2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0080)
+#define AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET 0x0084
+#define AM33XX_CM_PER_TIMER3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0084)
+#define AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET 0x0088
+#define AM33XX_CM_PER_TIMER4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0088)
+#define AM33XX_CM_PER_MCASP2_CLKCTRL_OFFSET 0x008c
+#define AM33XX_CM_PER_MCASP2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x008c)
+#define AM33XX_CM_PER_RNG_CLKCTRL_OFFSET 0x0090
+#define AM33XX_CM_PER_RNG_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0090)
+#define AM33XX_CM_PER_AES0_CLKCTRL_OFFSET 0x0094
+#define AM33XX_CM_PER_AES0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0094)
+#define AM33XX_CM_PER_AES1_CLKCTRL_OFFSET 0x0098
+#define AM33XX_CM_PER_AES1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0098)
+#define AM33XX_CM_PER_DES_CLKCTRL_OFFSET 0x009c
+#define AM33XX_CM_PER_DES_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x009c)
+#define AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET 0x00a0
+#define AM33XX_CM_PER_SHA0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a0)
+#define AM33XX_CM_PER_PKA_CLKCTRL_OFFSET 0x00a4
+#define AM33XX_CM_PER_PKA_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a4)
+#define AM33XX_CM_PER_GPIO6_CLKCTRL_OFFSET 0x00a8
+#define AM33XX_CM_PER_GPIO6_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a8)
+#define AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET 0x00ac
+#define AM33XX_CM_PER_GPIO1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00ac)
+#define AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET 0x00b0
+#define AM33XX_CM_PER_GPIO2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b0)
+#define AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET 0x00b4
+#define AM33XX_CM_PER_GPIO3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b4)
+#define AM33XX_CM_PER_GPIO4_CLKCTRL_OFFSET 0x00b8
+#define AM33XX_CM_PER_GPIO4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b8)
+#define AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET 0x00bc
+#define AM33XX_CM_PER_TPCC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00bc)
+#define AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET 0x00c0
+#define AM33XX_CM_PER_DCAN0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00c0)
+#define AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET 0x00c4
+#define AM33XX_CM_PER_DCAN1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00c4)
+#define AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET 0x00cc
+#define AM33XX_CM_PER_EPWMSS1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00cc)
+#define AM33XX_CM_PER_EMIF_FW_CLKCTRL_OFFSET 0x00d0
+#define AM33XX_CM_PER_EMIF_FW_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d0)
+#define AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET 0x00d4
+#define AM33XX_CM_PER_EPWMSS0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d4)
+#define AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET 0x00d8
+#define AM33XX_CM_PER_EPWMSS2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d8)
+#define AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET 0x00dc
+#define AM33XX_CM_PER_L3_INSTR_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00dc)
+#define AM33XX_CM_PER_L3_CLKCTRL_OFFSET 0x00e0
+#define AM33XX_CM_PER_L3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e0)
+#define AM33XX_CM_PER_IEEE5000_CLKCTRL_OFFSET 0x00e4
+#define AM33XX_CM_PER_IEEE5000_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e4)
+#define AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET 0x00e8
+#define AM33XX_CM_PER_PRUSS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e8)
+#define AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET 0x00ec
+#define AM33XX_CM_PER_TIMER5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00ec)
+#define AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET 0x00f0
+#define AM33XX_CM_PER_TIMER6_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f0)
+#define AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET 0x00f4
+#define AM33XX_CM_PER_MMC1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f4)
+#define AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET 0x00f8
+#define AM33XX_CM_PER_MMC2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f8)
+#define AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET 0x00fc
+#define AM33XX_CM_PER_TPTC1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00fc)
+#define AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET 0x0100
+#define AM33XX_CM_PER_TPTC2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0100)
+#define AM33XX_CM_PER_GPIO5_CLKCTRL_OFFSET 0x0104
+#define AM33XX_CM_PER_GPIO5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0104)
+#define AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET 0x010c
+#define AM33XX_CM_PER_SPINLOCK_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x010c)
+#define AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET 0x0110
+#define AM33XX_CM_PER_MAILBOX0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0110)
+#define AM33XX_CM_PER_L4HS_CLKSTCTRL_OFFSET 0x011c
+#define AM33XX_CM_PER_L4HS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x011c)
+#define AM33XX_CM_PER_L4HS_CLKCTRL_OFFSET 0x0120
+#define AM33XX_CM_PER_L4HS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0120)
+#define AM33XX_CM_PER_MSTR_EXPS_CLKCTRL_OFFSET 0x0124
+#define AM33XX_CM_PER_MSTR_EXPS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0124)
+#define AM33XX_CM_PER_SLV_EXPS_CLKCTRL_OFFSET 0x0128
+#define AM33XX_CM_PER_SLV_EXPS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0128)
+#define AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL_OFFSET 0x012c
+#define AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x012c)
+#define AM33XX_CM_PER_OCPWP_CLKCTRL_OFFSET 0x0130
+#define AM33XX_CM_PER_OCPWP_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0130)
+#define AM33XX_CM_PER_MAILBOX1_CLKCTRL_OFFSET 0x0134
+#define AM33XX_CM_PER_MAILBOX1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0134)
+#define AM33XX_CM_PER_PRUSS_CLKSTCTRL_OFFSET 0x0140
+#define AM33XX_CM_PER_PRUSS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0140)
+#define AM33XX_CM_PER_CPSW_CLKSTCTRL_OFFSET 0x0144
+#define AM33XX_CM_PER_CPSW_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0144)
+#define AM33XX_CM_PER_LCDC_CLKSTCTRL_OFFSET 0x0148
+#define AM33XX_CM_PER_LCDC_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0148)
+#define AM33XX_CM_PER_CLKDIV32K_CLKCTRL_OFFSET 0x014c
+#define AM33XX_CM_PER_CLKDIV32K_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x014c)
+#define AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL_OFFSET 0x0150
+#define AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0150)
+
+/* CM.WKUP_CM register offsets */
+#define AM33XX_CM_WKUP_CLKSTCTRL_OFFSET 0x0000
+#define AM33XX_CM_WKUP_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0000)
+#define AM33XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET 0x0004
+#define AM33XX_CM_WKUP_CONTROL_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0004)
+#define AM33XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET 0x0008
+#define AM33XX_CM_WKUP_GPIO0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0008)
+#define AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET 0x000c
+#define AM33XX_CM_WKUP_L4WKUP_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x000c)
+#define AM33XX_CM_WKUP_TIMER0_CLKCTRL_OFFSET 0x0010
+#define AM33XX_CM_WKUP_TIMER0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0010)
+#define AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET 0x0014
+#define AM33XX_CM_WKUP_DEBUGSS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0014)
+#define AM33XX_CM_L3_AON_CLKSTCTRL_OFFSET 0x0018
+#define AM33XX_CM_L3_AON_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0018)
+#define AM33XX_CM_AUTOIDLE_DPLL_MPU_OFFSET 0x001c
+#define AM33XX_CM_AUTOIDLE_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x001c)
+#define AM33XX_CM_IDLEST_DPLL_MPU_OFFSET 0x0020
+#define AM33XX_CM_IDLEST_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0020)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET 0x0024
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0024)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET 0x0028
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0028)
+#define AM33XX_CM_CLKSEL_DPLL_MPU_OFFSET 0x002c
+#define AM33XX_CM_CLKSEL_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x002c)
+#define AM33XX_CM_AUTOIDLE_DPLL_DDR_OFFSET 0x0030
+#define AM33XX_CM_AUTOIDLE_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0030)
+#define AM33XX_CM_IDLEST_DPLL_DDR_OFFSET 0x0034
+#define AM33XX_CM_IDLEST_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0034)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DDR_OFFSET 0x0038
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0038)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DDR_OFFSET 0x003c
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x003c)
+#define AM33XX_CM_CLKSEL_DPLL_DDR_OFFSET 0x0040
+#define AM33XX_CM_CLKSEL_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0040)
+#define AM33XX_CM_AUTOIDLE_DPLL_DISP_OFFSET 0x0044
+#define AM33XX_CM_AUTOIDLE_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0044)
+#define AM33XX_CM_IDLEST_DPLL_DISP_OFFSET 0x0048
+#define AM33XX_CM_IDLEST_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0048)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DISP_OFFSET 0x004c
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x004c)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DISP_OFFSET 0x0050
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0050)
+#define AM33XX_CM_CLKSEL_DPLL_DISP_OFFSET 0x0054
+#define AM33XX_CM_CLKSEL_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0054)
+#define AM33XX_CM_AUTOIDLE_DPLL_CORE_OFFSET 0x0058
+#define AM33XX_CM_AUTOIDLE_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0058)
+#define AM33XX_CM_IDLEST_DPLL_CORE_OFFSET 0x005c
+#define AM33XX_CM_IDLEST_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x005c)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET 0x0060
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0060)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET 0x0064
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0064)
+#define AM33XX_CM_CLKSEL_DPLL_CORE_OFFSET 0x0068
+#define AM33XX_CM_CLKSEL_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0068)
+#define AM33XX_CM_AUTOIDLE_DPLL_PER_OFFSET 0x006c
+#define AM33XX_CM_AUTOIDLE_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x006c)
+#define AM33XX_CM_IDLEST_DPLL_PER_OFFSET 0x0070
+#define AM33XX_CM_IDLEST_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0070)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET 0x0074
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0074)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET 0x0078
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0078)
+#define AM33XX_CM_CLKDCOLDO_DPLL_PER_OFFSET 0x007c
+#define AM33XX_CM_CLKDCOLDO_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x007c)
+#define AM33XX_CM_DIV_M4_DPLL_CORE_OFFSET 0x0080
+#define AM33XX_CM_DIV_M4_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0080)
+#define AM33XX_CM_DIV_M5_DPLL_CORE_OFFSET 0x0084
+#define AM33XX_CM_DIV_M5_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0084)
+#define AM33XX_CM_CLKMODE_DPLL_MPU_OFFSET 0x0088
+#define AM33XX_CM_CLKMODE_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0088)
+#define AM33XX_CM_CLKMODE_DPLL_PER_OFFSET 0x008c
+#define AM33XX_CM_CLKMODE_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x008c)
+#define AM33XX_CM_CLKMODE_DPLL_CORE_OFFSET 0x0090
+#define AM33XX_CM_CLKMODE_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0090)
+#define AM33XX_CM_CLKMODE_DPLL_DDR_OFFSET 0x0094
+#define AM33XX_CM_CLKMODE_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0094)
+#define AM33XX_CM_CLKMODE_DPLL_DISP_OFFSET 0x0098
+#define AM33XX_CM_CLKMODE_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0098)
+#define AM33XX_CM_CLKSEL_DPLL_PERIPH_OFFSET 0x009c
+#define AM33XX_CM_CLKSEL_DPLL_PERIPH AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x009c)
+#define AM33XX_CM_DIV_M2_DPLL_DDR_OFFSET 0x00a0
+#define AM33XX_CM_DIV_M2_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a0)
+#define AM33XX_CM_DIV_M2_DPLL_DISP_OFFSET 0x00a4
+#define AM33XX_CM_DIV_M2_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a4)
+#define AM33XX_CM_DIV_M2_DPLL_MPU_OFFSET 0x00a8
+#define AM33XX_CM_DIV_M2_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a8)
+#define AM33XX_CM_DIV_M2_DPLL_PER_OFFSET 0x00ac
+#define AM33XX_CM_DIV_M2_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00ac)
+#define AM33XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET 0x00b0
+#define AM33XX_CM_WKUP_WKUP_M3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b0)
+#define AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET 0x00b4
+#define AM33XX_CM_WKUP_UART0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b4)
+#define AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET 0x00b8
+#define AM33XX_CM_WKUP_I2C0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b8)
+#define AM33XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET 0x00bc
+#define AM33XX_CM_WKUP_ADC_TSC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00bc)
+#define AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET 0x00c0
+#define AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c0)
+#define AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET 0x00c4
+#define AM33XX_CM_WKUP_TIMER1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c4)
+#define AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET 0x00c8
+#define AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c8)
+#define AM33XX_CM_L4_WKUP_AON_CLKSTCTRL_OFFSET 0x00cc
+#define AM33XX_CM_L4_WKUP_AON_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00cc)
+#define AM33XX_CM_WKUP_WDT0_CLKCTRL_OFFSET 0x00d0
+#define AM33XX_CM_WKUP_WDT0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d0)
+#define AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET 0x00d4
+#define AM33XX_CM_WKUP_WDT1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d4)
+#define AM33XX_CM_DIV_M6_DPLL_CORE_OFFSET 0x00d8
+#define AM33XX_CM_DIV_M6_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d8)
+
+/* CM.DPLL_CM register offsets */
+#define AM33XX_CLKSEL_TIMER7_CLK_OFFSET 0x0004
+#define AM33XX_CLKSEL_TIMER7_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0004)
+#define AM33XX_CLKSEL_TIMER2_CLK_OFFSET 0x0008
+#define AM33XX_CLKSEL_TIMER2_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0008)
+#define AM33XX_CLKSEL_TIMER3_CLK_OFFSET 0x000c
+#define AM33XX_CLKSEL_TIMER3_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x000c)
+#define AM33XX_CLKSEL_TIMER4_CLK_OFFSET 0x0010
+#define AM33XX_CLKSEL_TIMER4_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0010)
+#define AM33XX_CM_MAC_CLKSEL_OFFSET 0x0014
+#define AM33XX_CM_MAC_CLKSEL AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0014)
+#define AM33XX_CLKSEL_TIMER5_CLK_OFFSET 0x0018
+#define AM33XX_CLKSEL_TIMER5_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0018)
+#define AM33XX_CLKSEL_TIMER6_CLK_OFFSET 0x001c
+#define AM33XX_CLKSEL_TIMER6_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x001c)
+#define AM33XX_CM_CPTS_RFT_CLKSEL_OFFSET 0x0020
+#define AM33XX_CM_CPTS_RFT_CLKSEL AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0020)
+#define AM33XX_CLKSEL_TIMER1MS_CLK_OFFSET 0x0028
+#define AM33XX_CLKSEL_TIMER1MS_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0028)
+#define AM33XX_CLKSEL_GFX_FCLK_OFFSET 0x002c
+#define AM33XX_CLKSEL_GFX_FCLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x002c)
+#define AM33XX_CLKSEL_PRUSS_OCP_CLK_OFFSET 0x0030
+#define AM33XX_CLKSEL_PRUSS_OCP_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0030)
+#define AM33XX_CLKSEL_LCDC_PIXEL_CLK_OFFSET 0x0034
+#define AM33XX_CLKSEL_LCDC_PIXEL_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0034)
+#define AM33XX_CLKSEL_WDT1_CLK_OFFSET 0x0038
+#define AM33XX_CLKSEL_WDT1_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0038)
+#define AM33XX_CLKSEL_GPIO0_DBCLK_OFFSET 0x003c
+#define AM33XX_CLKSEL_GPIO0_DBCLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x003c)
+
+/* CM.MPU_CM register offsets */
+#define AM33XX_CM_MPU_CLKSTCTRL_OFFSET 0x0000
+#define AM33XX_CM_MPU_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_MPU_MOD, 0x0000)
+#define AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET 0x0004
+#define AM33XX_CM_MPU_MPU_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_MPU_MOD, 0x0004)
+
+/* CM.DEVICE_CM register offsets */
+#define AM33XX_CM_CLKOUT_CTRL_OFFSET 0x0000
+#define AM33XX_CM_CLKOUT_CTRL AM33XX_CM_REGADDR(AM33XX_CM_DEVICE_MOD, 0x0000)
+
+/* CM.RTC_CM register offsets */
+#define AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET 0x0000
+#define AM33XX_CM_RTC_RTC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_RTC_MOD, 0x0000)
+#define AM33XX_CM_RTC_CLKSTCTRL_OFFSET 0x0004
+#define AM33XX_CM_RTC_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_RTC_MOD, 0x0004)
+
+/* CM.GFX_CM register offsets */
+#define AM33XX_CM_GFX_L3_CLKSTCTRL_OFFSET 0x0000
+#define AM33XX_CM_GFX_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0000)
+#define AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET 0x0004
+#define AM33XX_CM_GFX_GFX_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0004)
+#define AM33XX_CM_GFX_BITBLT_CLKCTRL_OFFSET 0x0008
+#define AM33XX_CM_GFX_BITBLT_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0008)
+#define AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1_OFFSET 0x000c
+#define AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1 AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x000c)
+#define AM33XX_CM_GFX_MMUCFG_CLKCTRL_OFFSET 0x0010
+#define AM33XX_CM_GFX_MMUCFG_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0010)
+#define AM33XX_CM_GFX_MMUDATA_CLKCTRL_OFFSET 0x0014
+#define AM33XX_CM_GFX_MMUDATA_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0014)
+
+/* CM.CEFUSE_CM register offsets */
+#define AM33XX_CM_CEFUSE_CLKSTCTRL_OFFSET 0x0000
+#define AM33XX_CM_CEFUSE_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0000)
+#define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET 0x0020
+#define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0020)
+
+
+extern bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs);
+extern void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs);
+extern void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs);
+extern void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs);
+extern void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs);
+
+#ifdef CONFIG_SOC_AM33XX
+extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs);
+extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs);
+extern void am33xx_cm_module_disable(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs);
+extern int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs);
+#else
+static inline int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+ return 0;
+}
+static inline void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+}
+static inline void am33xx_cm_module_disable(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+}
+static inline int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+ return 0;
+}
+#endif
+
+#endif
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 4/6] ARM: OMAP AM33xx: CM: Introduce AM33xx CM APIs and register level details
@ 2012-05-21 18:42 ` Paul Walmsley
0 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-05-21 18:42 UTC (permalink / raw)
To: linux-arm-kernel
From: Vaibhav Hiremath <hvaibhav@ti.com>
As far as PRM/CM/PRCM modules are concerned, AM33XX device is
different than OMAP3 and OMAP4 architectures; so similar to
PRM implementation, handle AM33XX CM separately.
This patch introduces AM33XX CM module low-level api's, used and
required by omap clockdomain and hwmod framework.
Please note that cm-regbits-33xx.h (register bit field offset)
and cm33xx.h (register addr offset) files are mostly auto generated.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
CC: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
[paul at pwsan.com: split the hwmod code changes in this patch into a separate
patch; updated for 3.5]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/Makefile | 2
arch/arm/mach-omap2/cm-regbits-33xx.h | 687 +++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/cm33xx.c | 313 +++++++++++++++
arch/arm/mach-omap2/cm33xx.h | 420 ++++++++++++++++++++
4 files changed, 1421 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-omap2/cm-regbits-33xx.h
create mode 100644 arch/arm/mach-omap2/cm33xx.c
create mode 100644 arch/arm/mach-omap2/cm33xx.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 32aed2d..8e23151 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -91,7 +91,7 @@ obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += prcm.o cminst44xx.o cm44xx.o
obj-$(CONFIG_ARCH_OMAP4) += prcm_mpu44xx.o prminst44xx.o
obj-$(CONFIG_ARCH_OMAP4) += vc44xx_data.o vp44xx_data.o prm44xx.o
-obj-$(CONFIG_SOC_AM33XX) += prcm.o prm33xx.o
+obj-$(CONFIG_SOC_AM33XX) += prcm.o prm33xx.o cm33xx.o
# OMAP voltage domains
voltagedomain-common := voltage.o vc.o vp.o
diff --git a/arch/arm/mach-omap2/cm-regbits-33xx.h b/arch/arm/mach-omap2/cm-regbits-33xx.h
new file mode 100644
index 0000000..532027e
--- /dev/null
+++ b/arch/arm/mach-omap2/cm-regbits-33xx.h
@@ -0,0 +1,687 @@
+/*
+ * AM33XX Power Management register bits
+ *
+ * This file is automatically generated from the AM33XX hardware databases.
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H
+
+/*
+ * Used by CM_AUTOIDLE_DPLL_CORE, CM_AUTOIDLE_DPLL_DDR, CM_AUTOIDLE_DPLL_DISP,
+ * CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER
+ */
+#define AM33XX_AUTO_DPLL_MODE_SHIFT 0
+#define AM33XX_AUTO_DPLL_MODE_MASK (0x7 << 0)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_ADC_FCLK_SHIFT 14
+#define AM33XX_CLKACTIVITY_ADC_FCLK_MASK (1 << 16)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CAN_CLK_SHIFT 11
+#define AM33XX_CLKACTIVITY_CAN_CLK_MASK (1 << 11)
+
+/* Used by CM_PER_CLK_24MHZ_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_CPSW_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_L4HS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_L4HS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_SHIFT 5
+#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_MASK (1 << 5)
+
+/* Used by CM_PER_L4HS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_SHIFT 6
+#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_MASK (1 << 6)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_SHIFT 6
+#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_MASK (1 << 6)
+
+/* Used by CM_CEFUSE_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT 9
+#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK (1 << 9)
+
+/* Used by CM_L3_AON_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_DBGSYSCLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_DBGSYSCLK_MASK (1 << 2)
+
+/* Used by CM_L3_AON_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_DEBUG_CLKA_SHIFT 4
+#define AM33XX_CLKACTIVITY_DEBUG_CLKA_MASK (1 << 4)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_EMIF_GCLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_EMIF_GCLK_MASK (1 << 2)
+
+/* Used by CM_GFX_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GFX_FCLK_SHIFT 9
+#define AM33XX_CLKACTIVITY_GFX_FCLK_MASK (1 << 9)
+
+/* Used by CM_GFX_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_MASK (1 << 8)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_MASK (1 << 8)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_SHIFT 19
+#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_MASK (1 << 19)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_SHIFT 20
+#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_MASK (1 << 20)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_SHIFT 21
+#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_MASK (1 << 21)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_SHIFT 22
+#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_MASK (1 << 22)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_SHIFT 26
+#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_MASK (1 << 26)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_SHIFT 18
+#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_I2C0_GFCLK_SHIFT 11
+#define AM33XX_CLKACTIVITY_I2C0_GFCLK_MASK (1 << 11)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_I2C_FCLK_SHIFT 24
+#define AM33XX_CLKACTIVITY_I2C_FCLK_MASK (1 << 24)
+
+/* Used by CM_PER_PRUSS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_SHIFT 5
+#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_MASK (1 << 5)
+
+/* Used by CM_PER_PRUSS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_PRUSS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_SHIFT 6
+#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_MASK (1 << 6)
+
+/* Used by CM_PER_L3S_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L3S_GCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_L3S_GCLK_MASK (1 << 3)
+
+/* Used by CM_L3_AON_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L3_AON_GCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_L3_AON_GCLK_MASK (1 << 3)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L3_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_L3_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_L4FW_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4FW_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4FW_GCLK_MASK (1 << 8)
+
+/* Used by CM_PER_L4HS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4HS_GCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_L4HS_GCLK_MASK (1 << 3)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4LS_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4LS_GCLK_MASK (1 << 8)
+
+/* Used by CM_GFX_L4LS_GFX_CLKSTCTRL__1 */
+#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_MASK (1 << 8)
+
+/* Used by CM_CEFUSE_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_MASK (1 << 8)
+
+/* Used by CM_RTC_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_MASK (1 << 8)
+
+/* Used by CM_L4_WKUP_AON_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_MASK (1 << 2)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_MASK (1 << 2)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_LCDC_GCLK_SHIFT 17
+#define AM33XX_CLKACTIVITY_LCDC_GCLK_MASK (1 << 17)
+
+/* Used by CM_PER_LCDC_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_LCDC_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_SHIFT 5
+#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_MASK (1 << 5)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_MCASP_GCLK_SHIFT 7
+#define AM33XX_CLKACTIVITY_MCASP_GCLK_MASK (1 << 7)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_MMC_FCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_MMC_FCLK_MASK (1 << 3)
+
+/* Used by CM_MPU_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_MPU_CLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_MPU_CLK_MASK (1 << 2)
+
+/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_SHIFT 5
+#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_MASK (1 << 5)
+
+/* Used by CM_RTC_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_RTC_32KCLK_SHIFT 9
+#define AM33XX_CLKACTIVITY_RTC_32KCLK_MASK (1 << 9)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_SPI_GCLK_SHIFT 25
+#define AM33XX_CLKACTIVITY_SPI_GCLK_MASK (1 << 25)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_SR_SYSCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_SR_SYSCLK_MASK (1 << 3)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER0_GCLK_SHIFT 10
+#define AM33XX_CLKACTIVITY_TIMER0_GCLK_MASK (1 << 10)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER1_GCLK_SHIFT 13
+#define AM33XX_CLKACTIVITY_TIMER1_GCLK_MASK (1 << 13)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER2_GCLK_SHIFT 14
+#define AM33XX_CLKACTIVITY_TIMER2_GCLK_MASK (1 << 14)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER3_GCLK_SHIFT 15
+#define AM33XX_CLKACTIVITY_TIMER3_GCLK_MASK (1 << 15)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER4_GCLK_SHIFT 16
+#define AM33XX_CLKACTIVITY_TIMER4_GCLK_MASK (1 << 16)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER5_GCLK_SHIFT 27
+#define AM33XX_CLKACTIVITY_TIMER5_GCLK_MASK (1 << 27)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER6_GCLK_SHIFT 28
+#define AM33XX_CLKACTIVITY_TIMER6_GCLK_MASK (1 << 28)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER7_GCLK_SHIFT 13
+#define AM33XX_CLKACTIVITY_TIMER7_GCLK_MASK (1 << 13)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_UART0_GFCLK_SHIFT 12
+#define AM33XX_CLKACTIVITY_UART0_GFCLK_MASK (1 << 12)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_UART_GFCLK_SHIFT 10
+#define AM33XX_CLKACTIVITY_UART_GFCLK_MASK (1 << 10)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_WDT0_GCLK_SHIFT 9
+#define AM33XX_CLKACTIVITY_WDT0_GCLK_MASK (1 << 9)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_WDT1_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_WDT1_GCLK_MASK (1 << 4)
+
+/* Used by CLKSEL_GFX_FCLK */
+#define AM33XX_CLKDIV_SEL_GFX_FCLK_SHIFT 0
+#define AM33XX_CLKDIV_SEL_GFX_FCLK_MASK (1 << 0)
+
+/* Used by CM_CLKOUT_CTRL */
+#define AM33XX_CLKOUT2DIV_SHIFT 3
+#define AM33XX_CLKOUT2DIV_MASK (0x05 << 3)
+
+/* Used by CM_CLKOUT_CTRL */
+#define AM33XX_CLKOUT2EN_SHIFT 7
+#define AM33XX_CLKOUT2EN_MASK (1 << 7)
+
+/* Used by CM_CLKOUT_CTRL */
+#define AM33XX_CLKOUT2SOURCE_SHIFT 0
+#define AM33XX_CLKOUT2SOURCE_MASK (0x02 << 0)
+
+/*
+ * Used by CLKSEL_GPIO0_DBCLK, CLKSEL_LCDC_PIXEL_CLK, CLKSEL_TIMER2_CLK,
+ * CLKSEL_TIMER3_CLK, CLKSEL_TIMER4_CLK, CLKSEL_TIMER5_CLK, CLKSEL_TIMER6_CLK,
+ * CLKSEL_TIMER7_CLK
+ */
+#define AM33XX_CLKSEL_SHIFT 0
+#define AM33XX_CLKSEL_MASK (0x01 << 0)
+
+/*
+ * Renamed from CLKSEL Used by CLKSEL_PRUSS_OCP_CLK, CLKSEL_WDT1_CLK,
+ * CM_CPTS_RFT_CLKSEL
+ */
+#define AM33XX_CLKSEL_0_0_SHIFT 0
+#define AM33XX_CLKSEL_0_0_MASK (1 << 0)
+
+#define AM33XX_CLKSEL_0_1_SHIFT 0
+#define AM33XX_CLKSEL_0_1_MASK (3 << 0)
+
+/* Renamed from CLKSEL Used by CLKSEL_TIMER1MS_CLK */
+#define AM33XX_CLKSEL_0_2_SHIFT 0
+#define AM33XX_CLKSEL_0_2_MASK (7 << 0)
+
+/* Used by CLKSEL_GFX_FCLK */
+#define AM33XX_CLKSEL_GFX_FCLK_SHIFT 1
+#define AM33XX_CLKSEL_GFX_FCLK_MASK (1 << 1)
+
+/*
+ * Used by CM_MPU_CLKSTCTRL, CM_RTC_CLKSTCTRL, CM_PER_CLK_24MHZ_CLKSTCTRL,
+ * CM_PER_CPSW_CLKSTCTRL, CM_PER_PRUSS_CLKSTCTRL, CM_PER_L3S_CLKSTCTRL,
+ * CM_PER_L3_CLKSTCTRL, CM_PER_L4FW_CLKSTCTRL, CM_PER_L4HS_CLKSTCTRL,
+ * CM_PER_L4LS_CLKSTCTRL, CM_PER_LCDC_CLKSTCTRL, CM_PER_OCPWP_L3_CLKSTCTRL,
+ * CM_L3_AON_CLKSTCTRL, CM_L4_WKUP_AON_CLKSTCTRL, CM_WKUP_CLKSTCTRL,
+ * CM_GFX_L3_CLKSTCTRL, CM_GFX_L4LS_GFX_CLKSTCTRL__1, CM_CEFUSE_CLKSTCTRL
+ */
+#define AM33XX_CLKTRCTRL_SHIFT 0
+#define AM33XX_CLKTRCTRL_MASK (0x3 << 0)
+
+/*
+ * Used by CM_SSC_DELTAMSTEP_DPLL_CORE, CM_SSC_DELTAMSTEP_DPLL_DDR,
+ * CM_SSC_DELTAMSTEP_DPLL_DISP, CM_SSC_DELTAMSTEP_DPLL_MPU,
+ * CM_SSC_DELTAMSTEP_DPLL_PER
+ */
+#define AM33XX_DELTAMSTEP_SHIFT 0
+#define AM33XX_DELTAMSTEP_MASK (0x19 << 0)
+
+/* Used by CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, CM_CLKSEL_DPLL_MPU */
+#define AM33XX_DPLL_BYP_CLKSEL_SHIFT 23
+#define AM33XX_DPLL_BYP_CLKSEL_MASK (1 << 23)
+
+/* Used by CM_CLKDCOLDO_DPLL_PER */
+#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT 8
+#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_MASK (1 << 8)
+
+/* Used by CM_CLKDCOLDO_DPLL_PER */
+#define AM33XX_DPLL_CLKDCOLDO_PWDN_SHIFT 12
+#define AM33XX_DPLL_CLKDCOLDO_PWDN_MASK (1 << 12)
+
+/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
+#define AM33XX_DPLL_CLKOUT_DIV_SHIFT 0
+#define AM33XX_DPLL_CLKOUT_DIV_MASK (0x1f << 0)
+
+/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_PER */
+#define AM33XX_DPLL_CLKOUT_DIV_0_6_SHIFT 0
+#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK (0x06 << 0)
+
+/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_SHIFT 5
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_MASK (1 << 5)
+
+/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_PER */
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_SHIFT 7
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_MASK (1 << 7)
+
+/*
+ * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU,
+ * CM_DIV_M2_DPLL_PER
+ */
+#define AM33XX_DPLL_CLKOUT_GATE_CTRL_SHIFT 8
+#define AM33XX_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8)
+
+/*
+ * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP,
+ * CM_CLKSEL_DPLL_MPU
+ */
+#define AM33XX_DPLL_DIV_SHIFT 0
+#define AM33XX_DPLL_DIV_MASK (0x7f << 0)
+
+#define AM33XX_DPLL_PER_DIV_MASK (0xff << 0)
+
+/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_PERIPH */
+#define AM33XX_DPLL_DIV_0_7_SHIFT 0
+#define AM33XX_DPLL_DIV_0_7_MASK (0x07 << 0)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU
+ */
+#define AM33XX_DPLL_DRIFTGUARD_EN_SHIFT 8
+#define AM33XX_DPLL_DRIFTGUARD_EN_MASK (1 << 8)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
+ */
+#define AM33XX_DPLL_EN_SHIFT 0
+#define AM33XX_DPLL_EN_MASK (0x7 << 0)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU
+ */
+#define AM33XX_DPLL_LPMODE_EN_SHIFT 10
+#define AM33XX_DPLL_LPMODE_EN_MASK (1 << 10)
+
+/*
+ * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP,
+ * CM_CLKSEL_DPLL_MPU
+ */
+#define AM33XX_DPLL_MULT_SHIFT 8
+#define AM33XX_DPLL_MULT_MASK (0x7ff << 8)
+
+/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_PERIPH */
+#define AM33XX_DPLL_MULT_PERIPH_SHIFT 8
+#define AM33XX_DPLL_MULT_PERIPH_MASK (0xfff << 8)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU
+ */
+#define AM33XX_DPLL_REGM4XEN_SHIFT 11
+#define AM33XX_DPLL_REGM4XEN_MASK (1 << 11)
+
+/* Used by CM_CLKSEL_DPLL_PERIPH */
+#define AM33XX_DPLL_SD_DIV_SHIFT 24
+#define AM33XX_DPLL_SD_DIV_MASK (24, 31)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
+ */
+#define AM33XX_DPLL_SSC_ACK_SHIFT 13
+#define AM33XX_DPLL_SSC_ACK_MASK (1 << 13)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
+ */
+#define AM33XX_DPLL_SSC_DOWNSPREAD_SHIFT 14
+#define AM33XX_DPLL_SSC_DOWNSPREAD_MASK (1 << 14)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
+ */
+#define AM33XX_DPLL_SSC_EN_SHIFT 12
+#define AM33XX_DPLL_SSC_EN_MASK (1 << 12)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT 0
+#define AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK (0x1f << 0)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT 5
+#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_MASK (1 << 5)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT 8
+#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK (1 << 8)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_SHIFT 12
+#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_MASK (1 << 12)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT 0
+#define AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK (0x1f << 0)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT 5
+#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_MASK (1 << 5)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT 8
+#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK (1 << 8)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_SHIFT 12
+#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_MASK (1 << 12)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT 0
+#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK (0x04 << 0)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT 5
+#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_MASK (1 << 5)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT 8
+#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK (1 << 8)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_SHIFT 12
+#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_MASK (1 << 12)
+
+/*
+ * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL,
+ * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL,
+ * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL,
+ * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL,
+ * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL,
+ * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL,
+ * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL,
+ * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL,
+ * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL,
+ * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL,
+ * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL,
+ * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL,
+ * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL,
+ * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL,
+ * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
+ * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL,
+ * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL,
+ * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL,
+ * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL,
+ * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL,
+ * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL,
+ * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
+ * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL,
+ * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL,
+ * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL,
+ * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL,
+ * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL,
+ * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL,
+ * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL,
+ * CM_WKUP_WDT1_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL,
+ * CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL
+ */
+#define AM33XX_IDLEST_SHIFT 16
+#define AM33XX_IDLEST_MASK (0x3 << 16)
+#define AM33XX_IDLEST_VAL 0x3
+
+/* Used by CM_MAC_CLKSEL */
+#define AM33XX_MII_CLK_SEL_SHIFT 2
+#define AM33XX_MII_CLK_SEL_MASK (1 << 2)
+
+/*
+ * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR,
+ * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU,
+ * CM_SSC_MODFREQDIV_DPLL_PER
+ */
+#define AM33XX_MODFREQDIV_EXPONENT_SHIFT 8
+#define AM33XX_MODFREQDIV_EXPONENT_MASK (0x10 << 8)
+
+/*
+ * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR,
+ * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU,
+ * CM_SSC_MODFREQDIV_DPLL_PER
+ */
+#define AM33XX_MODFREQDIV_MANTISSA_SHIFT 0
+#define AM33XX_MODFREQDIV_MANTISSA_MASK (0x06 << 0)
+
+/*
+ * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL,
+ * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL,
+ * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL,
+ * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL,
+ * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL,
+ * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL,
+ * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL,
+ * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL,
+ * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL,
+ * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL,
+ * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL,
+ * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL,
+ * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL,
+ * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL,
+ * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
+ * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL,
+ * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL,
+ * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL,
+ * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL,
+ * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL,
+ * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL,
+ * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
+ * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL,
+ * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL,
+ * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL,
+ * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL,
+ * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL,
+ * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL,
+ * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL,
+ * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL,
+ * CM_GFX_GFX_CLKCTRL, CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL,
+ * CM_CEFUSE_CEFUSE_CLKCTRL
+ */
+#define AM33XX_MODULEMODE_SHIFT 0
+#define AM33XX_MODULEMODE_MASK (0x3 << 0)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_OPTCLK_DEBUG_CLKA_SHIFT 30
+#define AM33XX_OPTCLK_DEBUG_CLKA_MASK (1 << 30)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT 19
+#define AM33XX_OPTFCLKEN_DBGSYSCLK_MASK (1 << 19)
+
+/* Used by CM_WKUP_GPIO0_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO1_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO2_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO3_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO4_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO5_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO6_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_MASK (1 << 18)
+
+/*
+ * Used by CM_MPU_MPU_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL, CM_PER_PRUSS_CLKCTRL,
+ * CM_PER_IEEE5000_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MLB_CLKCTRL,
+ * CM_PER_MSTR_EXPS_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
+ * CM_PER_SPARE_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
+ * CM_PER_TPTC2_CLKCTRL, CM_PER_USB0_CLKCTRL, CM_WKUP_DEBUGSS_CLKCTRL,
+ * CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL
+ */
+#define AM33XX_STBYST_SHIFT 18
+#define AM33XX_STBYST_MASK (1 << 18)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_STM_PMD_CLKDIVSEL_SHIFT 27
+#define AM33XX_STM_PMD_CLKDIVSEL_MASK (0x29 << 27)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_STM_PMD_CLKSEL_SHIFT 22
+#define AM33XX_STM_PMD_CLKSEL_MASK (0x23 << 22)
+
+/*
+ * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP,
+ * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
+ */
+#define AM33XX_ST_DPLL_CLK_SHIFT 0
+#define AM33XX_ST_DPLL_CLK_MASK (1 << 0)
+
+/* Used by CM_CLKDCOLDO_DPLL_PER */
+#define AM33XX_ST_DPLL_CLKDCOLDO_SHIFT 8
+#define AM33XX_ST_DPLL_CLKDCOLDO_MASK (1 << 8)
+
+/*
+ * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU,
+ * CM_DIV_M2_DPLL_PER
+ */
+#define AM33XX_ST_DPLL_CLKOUT_SHIFT 9
+#define AM33XX_ST_DPLL_CLKOUT_MASK (1 << 9)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_ST_HSDIVIDER_CLKOUT1_SHIFT 9
+#define AM33XX_ST_HSDIVIDER_CLKOUT1_MASK (1 << 9)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_ST_HSDIVIDER_CLKOUT2_SHIFT 9
+#define AM33XX_ST_HSDIVIDER_CLKOUT2_MASK (1 << 9)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_ST_HSDIVIDER_CLKOUT3_SHIFT 9
+#define AM33XX_ST_HSDIVIDER_CLKOUT3_MASK (1 << 9)
+
+/*
+ * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP,
+ * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
+ */
+#define AM33XX_ST_MN_BYPASS_SHIFT 8
+#define AM33XX_ST_MN_BYPASS_MASK (1 << 8)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_TRC_PMD_CLKDIVSEL_SHIFT 24
+#define AM33XX_TRC_PMD_CLKDIVSEL_MASK (0x26 << 24)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_TRC_PMD_CLKSEL_SHIFT 20
+#define AM33XX_TRC_PMD_CLKSEL_MASK (0x21 << 20)
+
+/* Used by CONTROL_SEC_CLK_CTRL */
+#define AM33XX_TIMER0_CLKSEL_MASK (0x3 << 4)
+#endif
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
new file mode 100644
index 0000000..13f56ea
--- /dev/null
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -0,0 +1,313 @@
+/*
+ * AM33XX CM functions
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Reference taken from from OMAP4 cminst44xx.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+
+#include "cm.h"
+#include "cm33xx.h"
+#include "cm-regbits-34xx.h"
+#include "cm-regbits-33xx.h"
+#include "prm33xx.h"
+
+/*
+ * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield:
+ *
+ * 0x0 func: Module is fully functional, including OCP
+ * 0x1 trans: Module is performing transition: wakeup, or sleep, or sleep
+ * abortion
+ * 0x2 idle: Module is in Idle mode (only OCP part). It is functional if
+ * using separate functional clock
+ * 0x3 disabled: Module is disabled and cannot be accessed
+ *
+ */
+#define CLKCTRL_IDLEST_FUNCTIONAL 0x0
+#define CLKCTRL_IDLEST_INTRANSITION 0x1
+#define CLKCTRL_IDLEST_INTERFACE_IDLE 0x2
+#define CLKCTRL_IDLEST_DISABLED 0x3
+
+/* Private functions */
+
+/* Read a register in a CM instance */
+static inline u32 am33xx_cm_read_reg(s16 inst, u16 idx)
+{
+ return __raw_readl(cm_base + inst + idx);
+}
+
+/* Write into a register in a CM */
+static inline void am33xx_cm_write_reg(u32 val, s16 inst, u16 idx)
+{
+ __raw_writel(val, cm_base + inst + idx);
+}
+
+/* Read-modify-write a register in CM */
+static inline u32 am33xx_cm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, idx);
+ v &= ~mask;
+ v |= bits;
+ am33xx_cm_write_reg(v, inst, idx);
+
+ return v;
+}
+
+static inline u32 am33xx_cm_set_reg_bits(u32 bits, s16 inst, s16 idx)
+{
+ return am33xx_cm_rmw_reg_bits(bits, bits, inst, idx);
+}
+
+static inline u32 am33xx_cm_clear_reg_bits(u32 bits, s16 inst, s16 idx)
+{
+ return am33xx_cm_rmw_reg_bits(bits, 0x0, inst, idx);
+}
+
+static inline u32 am33xx_cm_read_reg_bits(u16 inst, s16 idx, u32 mask)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, idx);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return v;
+}
+
+/**
+ * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to
+ * bit 0.
+ */
+static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ u32 v = am33xx_cm_read_reg(inst, clkctrl_offs);
+ v &= AM33XX_IDLEST_MASK;
+ v >>= AM33XX_IDLEST_SHIFT;
+ return v;
+}
+
+/**
+ * _is_module_ready - can module registers be accessed without causing an abort?
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either
+ * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise.
+ */
+static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ u32 v;
+
+ v = _clkctrl_idlest(inst, cdoffs, clkctrl_offs);
+
+ return (v == CLKCTRL_IDLEST_FUNCTIONAL ||
+ v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false;
+}
+
+/**
+ * _clktrctrl_write - write @c to a CM_CLKSTCTRL.CLKTRCTRL register bitfield
+ * @c: CLKTRCTRL register bitfield (LSB = bit 0, i.e., unshifted)
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * @c must be the unshifted value for CLKTRCTRL - i.e., this function
+ * will handle the shift itself.
+ */
+static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, cdoffs);
+ v &= ~AM33XX_CLKTRCTRL_MASK;
+ v |= c << AM33XX_CLKTRCTRL_SHIFT;
+ am33xx_cm_write_reg(v, inst, cdoffs);
+}
+
+/* Public functions */
+
+/**
+ * am33xx_cm_is_clkdm_in_hwsup - is a clockdomain in hwsup idle mode?
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Returns true if the clockdomain referred to by (@inst, @cdoffs)
+ * is in hardware-supervised idle mode, or 0 otherwise.
+ */
+bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, cdoffs);
+ v &= AM33XX_CLKTRCTRL_MASK;
+ v >>= AM33XX_CLKTRCTRL_SHIFT;
+
+ return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? true : false;
+}
+
+/**
+ * am33xx_cm_clkdm_enable_hwsup - put a clockdomain in hwsup-idle mode
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Put a clockdomain referred to by (@inst, @cdoffs) into
+ * hardware-supervised idle mode. No return value.
+ */
+void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs)
+{
+ _clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs);
+}
+
+/**
+ * am33xx_cm_clkdm_disable_hwsup - put a clockdomain in swsup-idle mode
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Put a clockdomain referred to by (@inst, @cdoffs) into
+ * software-supervised idle mode, i.e., controlled manually by the
+ * Linux OMAP clockdomain code. No return value.
+ */
+void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs)
+{
+ _clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs);
+}
+
+/**
+ * am33xx_cm_clkdm_force_sleep - try to put a clockdomain into idle
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Put a clockdomain referred to by (@inst, @cdoffs) into idle
+ * No return value.
+ */
+void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs)
+{
+ _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs);
+}
+
+/**
+ * am33xx_cm_clkdm_force_wakeup - try to take a clockdomain out of idle
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Take a clockdomain referred to by (@inst, @cdoffs) out of idle,
+ * waking it up. No return value.
+ */
+void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs)
+{
+ _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs);
+}
+
+/*
+ *
+ */
+
+/**
+ * am33xx_cm_wait_module_ready - wait for a module to be in 'func' state
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Wait for the module IDLEST to be functional. If the idle state is in any
+ * the non functional state (trans, idle or disabled), module and thus the
+ * sysconfig cannot be accessed and will probably lead to an "imprecise
+ * external abort"
+ */
+int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ int i = 0;
+
+ if (!clkctrl_offs)
+ return 0;
+
+ omap_test_timeout(_is_module_ready(inst, cdoffs, clkctrl_offs),
+ MAX_MODULE_READY_TIME, i);
+
+ return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
+/**
+ * am33xx_cm_wait_module_idle - wait for a module to be in 'disabled'
+ * state
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Wait for the module IDLEST to be disabled. Some PRCM transition,
+ * like reset assertion or parent clock de-activation must wait the
+ * module to be fully disabled.
+ */
+int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ int i = 0;
+
+ if (!clkctrl_offs)
+ return 0;
+
+ omap_test_timeout((_clkctrl_idlest(inst, cdoffs, clkctrl_offs) ==
+ CLKCTRL_IDLEST_DISABLED),
+ MAX_MODULE_READY_TIME, i);
+
+ return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
+/**
+ * am33xx_cm_module_enable - Enable the modulemode inside CLKCTRL
+ * @mode: Module mode (SW or HW)
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * No return value.
+ */
+void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, clkctrl_offs);
+ v &= ~AM33XX_MODULEMODE_MASK;
+ v |= mode << AM33XX_MODULEMODE_SHIFT;
+ am33xx_cm_write_reg(v, inst, clkctrl_offs);
+}
+
+/**
+ * am33xx_cm_module_disable - Disable the module inside CLKCTRL
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * No return value.
+ */
+void am33xx_cm_module_disable(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, clkctrl_offs);
+ v &= ~AM33XX_MODULEMODE_MASK;
+ am33xx_cm_write_reg(v, inst, clkctrl_offs);
+}
diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h
new file mode 100644
index 0000000..5fa0b62
--- /dev/null
+++ b/arch/arm/mach-omap2/cm33xx.h
@@ -0,0 +1,420 @@
+/*
+ * AM33XX CM offset macros
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_33XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_33XX_H
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include "common.h"
+
+#include "cm.h"
+#include "cm-regbits-33xx.h"
+#include "cm33xx.h"
+
+/* CM base address */
+#define AM33XX_CM_BASE 0x44e00000
+
+#define AM33XX_CM_REGADDR(inst, reg) \
+ AM33XX_L4_WK_IO_ADDRESS(AM33XX_CM_BASE + (inst) + (reg))
+
+/* CM instances */
+#define AM33XX_CM_PER_MOD 0x0000
+#define AM33XX_CM_WKUP_MOD 0x0400
+#define AM33XX_CM_DPLL_MOD 0x0500
+#define AM33XX_CM_MPU_MOD 0x0600
+#define AM33XX_CM_DEVICE_MOD 0x0700
+#define AM33XX_CM_RTC_MOD 0x0800
+#define AM33XX_CM_GFX_MOD 0x0900
+#define AM33XX_CM_CEFUSE_MOD 0x0A00
+
+/* CM */
+
+/* CM.PER_CM register offsets */
+#define AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET 0x0000
+#define AM33XX_CM_PER_L4LS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0000)
+#define AM33XX_CM_PER_L3S_CLKSTCTRL_OFFSET 0x0004
+#define AM33XX_CM_PER_L3S_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0004)
+#define AM33XX_CM_PER_L4FW_CLKSTCTRL_OFFSET 0x0008
+#define AM33XX_CM_PER_L4FW_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0008)
+#define AM33XX_CM_PER_L3_CLKSTCTRL_OFFSET 0x000c
+#define AM33XX_CM_PER_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x000c)
+#define AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET 0x0014
+#define AM33XX_CM_PER_CPGMAC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0014)
+#define AM33XX_CM_PER_LCDC_CLKCTRL_OFFSET 0x0018
+#define AM33XX_CM_PER_LCDC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0018)
+#define AM33XX_CM_PER_USB0_CLKCTRL_OFFSET 0x001c
+#define AM33XX_CM_PER_USB0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x001c)
+#define AM33XX_CM_PER_MLB_CLKCTRL_OFFSET 0x0020
+#define AM33XX_CM_PER_MLB_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0020)
+#define AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET 0x0024
+#define AM33XX_CM_PER_TPTC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0024)
+#define AM33XX_CM_PER_EMIF_CLKCTRL_OFFSET 0x0028
+#define AM33XX_CM_PER_EMIF_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0028)
+#define AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET 0x002c
+#define AM33XX_CM_PER_OCMCRAM_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x002c)
+#define AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET 0x0030
+#define AM33XX_CM_PER_GPMC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0030)
+#define AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET 0x0034
+#define AM33XX_CM_PER_MCASP0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0034)
+#define AM33XX_CM_PER_UART5_CLKCTRL_OFFSET 0x0038
+#define AM33XX_CM_PER_UART5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0038)
+#define AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET 0x003c
+#define AM33XX_CM_PER_MMC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x003c)
+#define AM33XX_CM_PER_ELM_CLKCTRL_OFFSET 0x0040
+#define AM33XX_CM_PER_ELM_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0040)
+#define AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET 0x0044
+#define AM33XX_CM_PER_I2C2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0044)
+#define AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET 0x0048
+#define AM33XX_CM_PER_I2C1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0048)
+#define AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET 0x004c
+#define AM33XX_CM_PER_SPI0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x004c)
+#define AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET 0x0050
+#define AM33XX_CM_PER_SPI1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0050)
+#define AM33XX_CM_PER_SPI2_CLKCTRL_OFFSET 0x0054
+#define AM33XX_CM_PER_SPI2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0054)
+#define AM33XX_CM_PER_SPI3_CLKCTRL_OFFSET 0x0058
+#define AM33XX_CM_PER_SPI3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0058)
+#define AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET 0x0060
+#define AM33XX_CM_PER_L4LS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0060)
+#define AM33XX_CM_PER_L4FW_CLKCTRL_OFFSET 0x0064
+#define AM33XX_CM_PER_L4FW_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0064)
+#define AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET 0x0068
+#define AM33XX_CM_PER_MCASP1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0068)
+#define AM33XX_CM_PER_UART1_CLKCTRL_OFFSET 0x006c
+#define AM33XX_CM_PER_UART1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x006c)
+#define AM33XX_CM_PER_UART2_CLKCTRL_OFFSET 0x0070
+#define AM33XX_CM_PER_UART2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0070)
+#define AM33XX_CM_PER_UART3_CLKCTRL_OFFSET 0x0074
+#define AM33XX_CM_PER_UART3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0074)
+#define AM33XX_CM_PER_UART4_CLKCTRL_OFFSET 0x0078
+#define AM33XX_CM_PER_UART4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0078)
+#define AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET 0x007c
+#define AM33XX_CM_PER_TIMER7_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x007c)
+#define AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET 0x0080
+#define AM33XX_CM_PER_TIMER2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0080)
+#define AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET 0x0084
+#define AM33XX_CM_PER_TIMER3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0084)
+#define AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET 0x0088
+#define AM33XX_CM_PER_TIMER4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0088)
+#define AM33XX_CM_PER_MCASP2_CLKCTRL_OFFSET 0x008c
+#define AM33XX_CM_PER_MCASP2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x008c)
+#define AM33XX_CM_PER_RNG_CLKCTRL_OFFSET 0x0090
+#define AM33XX_CM_PER_RNG_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0090)
+#define AM33XX_CM_PER_AES0_CLKCTRL_OFFSET 0x0094
+#define AM33XX_CM_PER_AES0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0094)
+#define AM33XX_CM_PER_AES1_CLKCTRL_OFFSET 0x0098
+#define AM33XX_CM_PER_AES1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0098)
+#define AM33XX_CM_PER_DES_CLKCTRL_OFFSET 0x009c
+#define AM33XX_CM_PER_DES_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x009c)
+#define AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET 0x00a0
+#define AM33XX_CM_PER_SHA0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a0)
+#define AM33XX_CM_PER_PKA_CLKCTRL_OFFSET 0x00a4
+#define AM33XX_CM_PER_PKA_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a4)
+#define AM33XX_CM_PER_GPIO6_CLKCTRL_OFFSET 0x00a8
+#define AM33XX_CM_PER_GPIO6_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a8)
+#define AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET 0x00ac
+#define AM33XX_CM_PER_GPIO1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00ac)
+#define AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET 0x00b0
+#define AM33XX_CM_PER_GPIO2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b0)
+#define AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET 0x00b4
+#define AM33XX_CM_PER_GPIO3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b4)
+#define AM33XX_CM_PER_GPIO4_CLKCTRL_OFFSET 0x00b8
+#define AM33XX_CM_PER_GPIO4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b8)
+#define AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET 0x00bc
+#define AM33XX_CM_PER_TPCC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00bc)
+#define AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET 0x00c0
+#define AM33XX_CM_PER_DCAN0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00c0)
+#define AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET 0x00c4
+#define AM33XX_CM_PER_DCAN1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00c4)
+#define AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET 0x00cc
+#define AM33XX_CM_PER_EPWMSS1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00cc)
+#define AM33XX_CM_PER_EMIF_FW_CLKCTRL_OFFSET 0x00d0
+#define AM33XX_CM_PER_EMIF_FW_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d0)
+#define AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET 0x00d4
+#define AM33XX_CM_PER_EPWMSS0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d4)
+#define AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET 0x00d8
+#define AM33XX_CM_PER_EPWMSS2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d8)
+#define AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET 0x00dc
+#define AM33XX_CM_PER_L3_INSTR_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00dc)
+#define AM33XX_CM_PER_L3_CLKCTRL_OFFSET 0x00e0
+#define AM33XX_CM_PER_L3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e0)
+#define AM33XX_CM_PER_IEEE5000_CLKCTRL_OFFSET 0x00e4
+#define AM33XX_CM_PER_IEEE5000_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e4)
+#define AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET 0x00e8
+#define AM33XX_CM_PER_PRUSS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e8)
+#define AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET 0x00ec
+#define AM33XX_CM_PER_TIMER5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00ec)
+#define AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET 0x00f0
+#define AM33XX_CM_PER_TIMER6_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f0)
+#define AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET 0x00f4
+#define AM33XX_CM_PER_MMC1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f4)
+#define AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET 0x00f8
+#define AM33XX_CM_PER_MMC2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f8)
+#define AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET 0x00fc
+#define AM33XX_CM_PER_TPTC1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00fc)
+#define AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET 0x0100
+#define AM33XX_CM_PER_TPTC2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0100)
+#define AM33XX_CM_PER_GPIO5_CLKCTRL_OFFSET 0x0104
+#define AM33XX_CM_PER_GPIO5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0104)
+#define AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET 0x010c
+#define AM33XX_CM_PER_SPINLOCK_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x010c)
+#define AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET 0x0110
+#define AM33XX_CM_PER_MAILBOX0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0110)
+#define AM33XX_CM_PER_L4HS_CLKSTCTRL_OFFSET 0x011c
+#define AM33XX_CM_PER_L4HS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x011c)
+#define AM33XX_CM_PER_L4HS_CLKCTRL_OFFSET 0x0120
+#define AM33XX_CM_PER_L4HS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0120)
+#define AM33XX_CM_PER_MSTR_EXPS_CLKCTRL_OFFSET 0x0124
+#define AM33XX_CM_PER_MSTR_EXPS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0124)
+#define AM33XX_CM_PER_SLV_EXPS_CLKCTRL_OFFSET 0x0128
+#define AM33XX_CM_PER_SLV_EXPS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0128)
+#define AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL_OFFSET 0x012c
+#define AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x012c)
+#define AM33XX_CM_PER_OCPWP_CLKCTRL_OFFSET 0x0130
+#define AM33XX_CM_PER_OCPWP_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0130)
+#define AM33XX_CM_PER_MAILBOX1_CLKCTRL_OFFSET 0x0134
+#define AM33XX_CM_PER_MAILBOX1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0134)
+#define AM33XX_CM_PER_PRUSS_CLKSTCTRL_OFFSET 0x0140
+#define AM33XX_CM_PER_PRUSS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0140)
+#define AM33XX_CM_PER_CPSW_CLKSTCTRL_OFFSET 0x0144
+#define AM33XX_CM_PER_CPSW_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0144)
+#define AM33XX_CM_PER_LCDC_CLKSTCTRL_OFFSET 0x0148
+#define AM33XX_CM_PER_LCDC_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0148)
+#define AM33XX_CM_PER_CLKDIV32K_CLKCTRL_OFFSET 0x014c
+#define AM33XX_CM_PER_CLKDIV32K_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x014c)
+#define AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL_OFFSET 0x0150
+#define AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0150)
+
+/* CM.WKUP_CM register offsets */
+#define AM33XX_CM_WKUP_CLKSTCTRL_OFFSET 0x0000
+#define AM33XX_CM_WKUP_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0000)
+#define AM33XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET 0x0004
+#define AM33XX_CM_WKUP_CONTROL_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0004)
+#define AM33XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET 0x0008
+#define AM33XX_CM_WKUP_GPIO0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0008)
+#define AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET 0x000c
+#define AM33XX_CM_WKUP_L4WKUP_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x000c)
+#define AM33XX_CM_WKUP_TIMER0_CLKCTRL_OFFSET 0x0010
+#define AM33XX_CM_WKUP_TIMER0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0010)
+#define AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET 0x0014
+#define AM33XX_CM_WKUP_DEBUGSS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0014)
+#define AM33XX_CM_L3_AON_CLKSTCTRL_OFFSET 0x0018
+#define AM33XX_CM_L3_AON_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0018)
+#define AM33XX_CM_AUTOIDLE_DPLL_MPU_OFFSET 0x001c
+#define AM33XX_CM_AUTOIDLE_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x001c)
+#define AM33XX_CM_IDLEST_DPLL_MPU_OFFSET 0x0020
+#define AM33XX_CM_IDLEST_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0020)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET 0x0024
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0024)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET 0x0028
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0028)
+#define AM33XX_CM_CLKSEL_DPLL_MPU_OFFSET 0x002c
+#define AM33XX_CM_CLKSEL_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x002c)
+#define AM33XX_CM_AUTOIDLE_DPLL_DDR_OFFSET 0x0030
+#define AM33XX_CM_AUTOIDLE_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0030)
+#define AM33XX_CM_IDLEST_DPLL_DDR_OFFSET 0x0034
+#define AM33XX_CM_IDLEST_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0034)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DDR_OFFSET 0x0038
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0038)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DDR_OFFSET 0x003c
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x003c)
+#define AM33XX_CM_CLKSEL_DPLL_DDR_OFFSET 0x0040
+#define AM33XX_CM_CLKSEL_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0040)
+#define AM33XX_CM_AUTOIDLE_DPLL_DISP_OFFSET 0x0044
+#define AM33XX_CM_AUTOIDLE_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0044)
+#define AM33XX_CM_IDLEST_DPLL_DISP_OFFSET 0x0048
+#define AM33XX_CM_IDLEST_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0048)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DISP_OFFSET 0x004c
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x004c)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DISP_OFFSET 0x0050
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0050)
+#define AM33XX_CM_CLKSEL_DPLL_DISP_OFFSET 0x0054
+#define AM33XX_CM_CLKSEL_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0054)
+#define AM33XX_CM_AUTOIDLE_DPLL_CORE_OFFSET 0x0058
+#define AM33XX_CM_AUTOIDLE_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0058)
+#define AM33XX_CM_IDLEST_DPLL_CORE_OFFSET 0x005c
+#define AM33XX_CM_IDLEST_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x005c)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET 0x0060
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0060)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET 0x0064
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0064)
+#define AM33XX_CM_CLKSEL_DPLL_CORE_OFFSET 0x0068
+#define AM33XX_CM_CLKSEL_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0068)
+#define AM33XX_CM_AUTOIDLE_DPLL_PER_OFFSET 0x006c
+#define AM33XX_CM_AUTOIDLE_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x006c)
+#define AM33XX_CM_IDLEST_DPLL_PER_OFFSET 0x0070
+#define AM33XX_CM_IDLEST_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0070)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET 0x0074
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0074)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET 0x0078
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0078)
+#define AM33XX_CM_CLKDCOLDO_DPLL_PER_OFFSET 0x007c
+#define AM33XX_CM_CLKDCOLDO_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x007c)
+#define AM33XX_CM_DIV_M4_DPLL_CORE_OFFSET 0x0080
+#define AM33XX_CM_DIV_M4_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0080)
+#define AM33XX_CM_DIV_M5_DPLL_CORE_OFFSET 0x0084
+#define AM33XX_CM_DIV_M5_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0084)
+#define AM33XX_CM_CLKMODE_DPLL_MPU_OFFSET 0x0088
+#define AM33XX_CM_CLKMODE_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0088)
+#define AM33XX_CM_CLKMODE_DPLL_PER_OFFSET 0x008c
+#define AM33XX_CM_CLKMODE_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x008c)
+#define AM33XX_CM_CLKMODE_DPLL_CORE_OFFSET 0x0090
+#define AM33XX_CM_CLKMODE_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0090)
+#define AM33XX_CM_CLKMODE_DPLL_DDR_OFFSET 0x0094
+#define AM33XX_CM_CLKMODE_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0094)
+#define AM33XX_CM_CLKMODE_DPLL_DISP_OFFSET 0x0098
+#define AM33XX_CM_CLKMODE_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0098)
+#define AM33XX_CM_CLKSEL_DPLL_PERIPH_OFFSET 0x009c
+#define AM33XX_CM_CLKSEL_DPLL_PERIPH AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x009c)
+#define AM33XX_CM_DIV_M2_DPLL_DDR_OFFSET 0x00a0
+#define AM33XX_CM_DIV_M2_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a0)
+#define AM33XX_CM_DIV_M2_DPLL_DISP_OFFSET 0x00a4
+#define AM33XX_CM_DIV_M2_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a4)
+#define AM33XX_CM_DIV_M2_DPLL_MPU_OFFSET 0x00a8
+#define AM33XX_CM_DIV_M2_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a8)
+#define AM33XX_CM_DIV_M2_DPLL_PER_OFFSET 0x00ac
+#define AM33XX_CM_DIV_M2_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00ac)
+#define AM33XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET 0x00b0
+#define AM33XX_CM_WKUP_WKUP_M3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b0)
+#define AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET 0x00b4
+#define AM33XX_CM_WKUP_UART0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b4)
+#define AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET 0x00b8
+#define AM33XX_CM_WKUP_I2C0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b8)
+#define AM33XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET 0x00bc
+#define AM33XX_CM_WKUP_ADC_TSC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00bc)
+#define AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET 0x00c0
+#define AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c0)
+#define AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET 0x00c4
+#define AM33XX_CM_WKUP_TIMER1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c4)
+#define AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET 0x00c8
+#define AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c8)
+#define AM33XX_CM_L4_WKUP_AON_CLKSTCTRL_OFFSET 0x00cc
+#define AM33XX_CM_L4_WKUP_AON_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00cc)
+#define AM33XX_CM_WKUP_WDT0_CLKCTRL_OFFSET 0x00d0
+#define AM33XX_CM_WKUP_WDT0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d0)
+#define AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET 0x00d4
+#define AM33XX_CM_WKUP_WDT1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d4)
+#define AM33XX_CM_DIV_M6_DPLL_CORE_OFFSET 0x00d8
+#define AM33XX_CM_DIV_M6_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d8)
+
+/* CM.DPLL_CM register offsets */
+#define AM33XX_CLKSEL_TIMER7_CLK_OFFSET 0x0004
+#define AM33XX_CLKSEL_TIMER7_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0004)
+#define AM33XX_CLKSEL_TIMER2_CLK_OFFSET 0x0008
+#define AM33XX_CLKSEL_TIMER2_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0008)
+#define AM33XX_CLKSEL_TIMER3_CLK_OFFSET 0x000c
+#define AM33XX_CLKSEL_TIMER3_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x000c)
+#define AM33XX_CLKSEL_TIMER4_CLK_OFFSET 0x0010
+#define AM33XX_CLKSEL_TIMER4_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0010)
+#define AM33XX_CM_MAC_CLKSEL_OFFSET 0x0014
+#define AM33XX_CM_MAC_CLKSEL AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0014)
+#define AM33XX_CLKSEL_TIMER5_CLK_OFFSET 0x0018
+#define AM33XX_CLKSEL_TIMER5_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0018)
+#define AM33XX_CLKSEL_TIMER6_CLK_OFFSET 0x001c
+#define AM33XX_CLKSEL_TIMER6_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x001c)
+#define AM33XX_CM_CPTS_RFT_CLKSEL_OFFSET 0x0020
+#define AM33XX_CM_CPTS_RFT_CLKSEL AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0020)
+#define AM33XX_CLKSEL_TIMER1MS_CLK_OFFSET 0x0028
+#define AM33XX_CLKSEL_TIMER1MS_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0028)
+#define AM33XX_CLKSEL_GFX_FCLK_OFFSET 0x002c
+#define AM33XX_CLKSEL_GFX_FCLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x002c)
+#define AM33XX_CLKSEL_PRUSS_OCP_CLK_OFFSET 0x0030
+#define AM33XX_CLKSEL_PRUSS_OCP_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0030)
+#define AM33XX_CLKSEL_LCDC_PIXEL_CLK_OFFSET 0x0034
+#define AM33XX_CLKSEL_LCDC_PIXEL_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0034)
+#define AM33XX_CLKSEL_WDT1_CLK_OFFSET 0x0038
+#define AM33XX_CLKSEL_WDT1_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0038)
+#define AM33XX_CLKSEL_GPIO0_DBCLK_OFFSET 0x003c
+#define AM33XX_CLKSEL_GPIO0_DBCLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x003c)
+
+/* CM.MPU_CM register offsets */
+#define AM33XX_CM_MPU_CLKSTCTRL_OFFSET 0x0000
+#define AM33XX_CM_MPU_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_MPU_MOD, 0x0000)
+#define AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET 0x0004
+#define AM33XX_CM_MPU_MPU_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_MPU_MOD, 0x0004)
+
+/* CM.DEVICE_CM register offsets */
+#define AM33XX_CM_CLKOUT_CTRL_OFFSET 0x0000
+#define AM33XX_CM_CLKOUT_CTRL AM33XX_CM_REGADDR(AM33XX_CM_DEVICE_MOD, 0x0000)
+
+/* CM.RTC_CM register offsets */
+#define AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET 0x0000
+#define AM33XX_CM_RTC_RTC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_RTC_MOD, 0x0000)
+#define AM33XX_CM_RTC_CLKSTCTRL_OFFSET 0x0004
+#define AM33XX_CM_RTC_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_RTC_MOD, 0x0004)
+
+/* CM.GFX_CM register offsets */
+#define AM33XX_CM_GFX_L3_CLKSTCTRL_OFFSET 0x0000
+#define AM33XX_CM_GFX_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0000)
+#define AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET 0x0004
+#define AM33XX_CM_GFX_GFX_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0004)
+#define AM33XX_CM_GFX_BITBLT_CLKCTRL_OFFSET 0x0008
+#define AM33XX_CM_GFX_BITBLT_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0008)
+#define AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1_OFFSET 0x000c
+#define AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1 AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x000c)
+#define AM33XX_CM_GFX_MMUCFG_CLKCTRL_OFFSET 0x0010
+#define AM33XX_CM_GFX_MMUCFG_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0010)
+#define AM33XX_CM_GFX_MMUDATA_CLKCTRL_OFFSET 0x0014
+#define AM33XX_CM_GFX_MMUDATA_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0014)
+
+/* CM.CEFUSE_CM register offsets */
+#define AM33XX_CM_CEFUSE_CLKSTCTRL_OFFSET 0x0000
+#define AM33XX_CM_CEFUSE_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0000)
+#define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET 0x0020
+#define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0020)
+
+
+extern bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs);
+extern void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs);
+extern void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs);
+extern void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs);
+extern void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs);
+
+#ifdef CONFIG_SOC_AM33XX
+extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs);
+extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs);
+extern void am33xx_cm_module_disable(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs);
+extern int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs);
+#else
+static inline int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+ return 0;
+}
+static inline void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+}
+static inline void am33xx_cm_module_disable(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+}
+static inline int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+ return 0;
+}
+#endif
+
+#endif
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 5/6] ARM: OMAP AM33xx: powerdomains: add AM335x support
2012-05-21 18:41 ` Paul Walmsley
@ 2012-05-21 18:42 ` Paul Walmsley
-1 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-05-21 18:42 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel
Cc: Tony Lindgren, Kevin Hilman, Rajendra Nayak, Benoit Cousson,
Vaibhav Hiremath
From: Vaibhav Hiremath <hvaibhav@ti.com>
Add offset & mask fields to struct powerdomain
In case of AM33xx family of devices, there is no consistency between
PWRSTCTRL & PWRSTST register offsers in PRM space, for example -
PRM_XXX PWRSTCTRL PWRSTST
=======================================
PRM_PER_MOD: 0x0C, 0x08
PRM_WKUP_MOD: 0x04, 0x08
PRM_MPU_MOD: 0x00, 0x04
PRM_DEVICE_MOD: NA, NA
And also, there is no consistency between bit-offsets inside
PWRSTCTRL & PWRSTST register, for example -
PRM_XXX LOGICRET MEMON MEMRET
=======================================
GFX_PWRCTRL: 2, 17, 6
PER_PWRCTRL: 3, 25, 29
MPU_PWRCTRL: 2, 18, 22
WKUP_PWRCTRL: 3, NA, NA
This means, we need to maintain and pass on all this information
in powerdomain handle; so adding fields for,
- PWRSTCTRL/ST register offset
- Logic retention state mask
- mem_on/ret/pwrst/retst mask
Currently, this fields is only applicable and used for AM33XX devices.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: this patch is a combination of "Add offset & mask fields to
struct powerdomain" and the powerdomain portions of "ARM: OMAP3+: am33xx:
Add powerdomain & PRM support"; updated for 3.5]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/Makefile | 2
arch/arm/mach-omap2/io.c | 1
arch/arm/mach-omap2/powerdomain.h | 23 ++-
arch/arm/mach-omap2/powerdomain33xx.c | 229 +++++++++++++++++++++++++++
arch/arm/mach-omap2/powerdomains33xx_data.c | 185 ++++++++++++++++++++++
5 files changed, 438 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-omap2/powerdomain33xx.c
create mode 100644 arch/arm/mach-omap2/powerdomains33xx_data.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8e23151..44b779f 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -118,6 +118,8 @@ obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o
obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o
obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common)
+obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o
# PRCM clockdomain control
clockdomain-common += clockdomain.o
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 6cdc4ac..0a6fc47 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -446,6 +446,7 @@ void __init am33xx_init_early(void)
ti81xx_check_features();
omap_common_init_early();
am33xx_voltagedomains_init();
+ am33xx_powerdomains_init();
}
#endif
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index 0d72a8a..5856a2c 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -67,9 +67,9 @@
/*
* Maximum number of clockdomains that can be associated with a powerdomain.
- * CORE powerdomain on OMAP4 is the worst case
+ * PER powerdomain on AM33XX is the worst case
*/
-#define PWRDM_MAX_CLKDMS 9
+#define PWRDM_MAX_CLKDMS 11
/* XXX A completely arbitrary number. What is reasonable here? */
#define PWRDM_TRANSITION_BAILOUT 100000
@@ -92,6 +92,15 @@ struct powerdomain;
* @pwrdm_clkdms: Clockdomains in this powerdomain
* @node: list_head linking all powerdomains
* @voltdm_node: list_head linking all powerdomains in a voltagedomain
+ * @pwrstctrl_offs: (AM33XX only) XXX_PWRSTCTRL reg offset from prcm_offs
+ * @pwrstst_offs: (AM33XX only) XXX_PWRSTST reg offset from prcm_offs
+ * @logicretstate_mask: (AM33XX only) mask for logic retention bitfield
+ * in @pwrstctrl_offs
+ * @mem_on_mask: (AM33XX only) mask for mem on bitfield in @pwrstctrl_offs
+ * @mem_ret_mask: (AM33XX only) mask for mem ret bitfield in @pwrstctrl_offs
+ * @mem_pwrst_mask: (AM33XX only) mask for mem state bitfield in @pwrstst_offs
+ * @mem_retst_mask: (AM33XX only) mask for mem retention state bitfield
+ * in @pwrstctrl_offs
* @state:
* @state_counter:
* @timer:
@@ -121,6 +130,14 @@ struct powerdomain {
unsigned ret_logic_off_counter;
unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS];
+ const u8 pwrstctrl_offs;
+ const u8 pwrstst_offs;
+ const u32 logicretstate_mask;
+ const u32 mem_on_mask[PWRDM_MAX_MEM_BANKS];
+ const u32 mem_ret_mask[PWRDM_MAX_MEM_BANKS];
+ const u32 mem_pwrst_mask[PWRDM_MAX_MEM_BANKS];
+ const u32 mem_retst_mask[PWRDM_MAX_MEM_BANKS];
+
#ifdef CONFIG_PM_DEBUG
s64 timer;
s64 state_timer[PWRDM_MAX_PWRSTS];
@@ -223,10 +240,12 @@ bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
extern void omap242x_powerdomains_init(void);
extern void omap243x_powerdomains_init(void);
extern void omap3xxx_powerdomains_init(void);
+extern void am33xx_powerdomains_init(void);
extern void omap44xx_powerdomains_init(void);
extern struct pwrdm_ops omap2_pwrdm_operations;
extern struct pwrdm_ops omap3_pwrdm_operations;
+extern struct pwrdm_ops am33xx_pwrdm_operations;
extern struct pwrdm_ops omap4_pwrdm_operations;
/* Common Internal functions used across OMAP rev's */
diff --git a/arch/arm/mach-omap2/powerdomain33xx.c b/arch/arm/mach-omap2/powerdomain33xx.c
new file mode 100644
index 0000000..67c5663
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomain33xx.c
@@ -0,0 +1,229 @@
+/*
+ * AM33XX Powerdomain control
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from mach-omap2/powerdomain44xx.c written by Rajendra Nayak
+ * <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <plat/prcm.h>
+
+#include "powerdomain.h"
+#include "prm33xx.h"
+#include "prm-regbits-33xx.h"
+
+
+static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK,
+ (pwrst << OMAP_POWERSTATE_SHIFT),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= OMAP_POWERSTATE_MASK;
+ v >>= OMAP_POWERSTATE_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= OMAP_POWERSTATEST_MASK;
+ v >>= OMAP_POWERSTATEST_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
+ v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
+{
+ am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
+ (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+ am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK,
+ AM33XX_LASTPOWERSTATEENTERED_MASK,
+ pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->logicretstate_mask;
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= AM33XX_LOGICSTATEST_MASK;
+ v >>= AM33XX_LOGICSTATEST_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+ u32 v, m;
+
+ m = pwrdm->logicretstate_mask;
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->mem_on_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->mem_ret_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = pwrdm->mem_pwrst_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = pwrdm->mem_retst_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+ u32 c = 0;
+
+ /*
+ * REVISIT: pwrdm_wait_transition() may be better implemented
+ * via a callback and a periodic timer check -- how long do we expect
+ * powerdomain transitions to take?
+ */
+
+ /* XXX Is this udelay() value meaningful? */
+ while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs)
+ & OMAP_INTRANSITION_MASK) &&
+ (c++ < PWRDM_TRANSITION_BAILOUT))
+ udelay(1);
+
+ if (c > PWRDM_TRANSITION_BAILOUT) {
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
+ return -EAGAIN;
+ }
+
+ pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+ return 0;
+}
+
+struct pwrdm_ops am33xx_pwrdm_operations = {
+ .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst,
+ .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst,
+ .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst,
+ .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst,
+ .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst,
+ .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst,
+ .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst,
+ .pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst,
+ .pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange,
+ .pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst,
+ .pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst,
+ .pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst,
+ .pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst,
+ .pwrdm_wait_transition = am33xx_pwrdm_wait_transition,
+};
diff --git a/arch/arm/mach-omap2/powerdomains33xx_data.c b/arch/arm/mach-omap2/powerdomains33xx_data.c
new file mode 100644
index 0000000..869adb8
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains33xx_data.c
@@ -0,0 +1,185 @@
+/*
+ * AM33XX Power domain data
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "powerdomain.h"
+#include "prcm-common.h"
+#include "prm-regbits-33xx.h"
+#include "prm33xx.h"
+
+static struct powerdomain gfx_33xx_pwrdm = {
+ .name = "gfx_pwrdm",
+ .voltdm = { .name = "core" },
+ .prcm_offs = AM33XX_PRM_GFX_MOD,
+ .pwrstctrl_offs = AM33XX_PM_GFX_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_GFX_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
+ .banks = 1,
+ .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK,
+ .mem_on_mask = {
+ [0] = AM33XX_GFX_MEM_ONSTATE_MASK, /* gfx_mem */
+ },
+ .mem_ret_mask = {
+ [0] = AM33XX_GFX_MEM_RETSTATE_MASK, /* gfx_mem */
+ },
+ .mem_pwrst_mask = {
+ [0] = AM33XX_GFX_MEM_STATEST_MASK, /* gfx_mem */
+ },
+ .mem_retst_mask = {
+ [0] = AM33XX_GFX_MEM_RETSTATE_MASK, /* gfx_mem */
+ },
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET, /* gfx_mem */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_ON, /* gfx_mem */
+ },
+};
+
+static struct powerdomain rtc_33xx_pwrdm = {
+ .name = "rtc_pwrdm",
+ .voltdm = { .name = "rtc" },
+ .prcm_offs = AM33XX_PRM_RTC_MOD,
+ .pwrstctrl_offs = AM33XX_PM_RTC_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_RTC_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_ON,
+ .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK,
+};
+
+static struct powerdomain wkup_33xx_pwrdm = {
+ .name = "wkup_pwrdm",
+ .voltdm = { .name = "core" },
+ .prcm_offs = AM33XX_PRM_WKUP_MOD,
+ .pwrstctrl_offs = AM33XX_PM_WKUP_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_WKUP_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_ON,
+ .logicretstate_mask = AM33XX_LOGICRETSTATE_3_3_MASK,
+};
+
+static struct powerdomain per_33xx_pwrdm = {
+ .name = "per_pwrdm",
+ .voltdm = { .name = "core" },
+ .prcm_offs = AM33XX_PRM_PER_MOD,
+ .pwrstctrl_offs = AM33XX_PM_PER_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_PER_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
+ .banks = 3,
+ .logicretstate_mask = AM33XX_LOGICRETSTATE_3_3_MASK,
+ .mem_on_mask = {
+ [0] = AM33XX_PRUSS_MEM_ONSTATE_MASK, /* pruss_mem */
+ [1] = AM33XX_PER_MEM_ONSTATE_MASK, /* per_mem */
+ [2] = AM33XX_RAM_MEM_ONSTATE_MASK, /* ram_mem */
+ },
+ .mem_ret_mask = {
+ [0] = AM33XX_PRUSS_MEM_RETSTATE_MASK, /* pruss_mem */
+ [1] = AM33XX_PER_MEM_RETSTATE_MASK, /* per_mem */
+ [2] = AM33XX_RAM_MEM_RETSTATE_MASK, /* ram_mem */
+ },
+ .mem_pwrst_mask = {
+ [0] = AM33XX_PRUSS_MEM_STATEST_MASK, /* pruss_mem */
+ [1] = AM33XX_PER_MEM_STATEST_MASK, /* per_mem */
+ [2] = AM33XX_RAM_MEM_STATEST_MASK, /* ram_mem */
+ },
+ .mem_retst_mask = {
+ [0] = AM33XX_PRUSS_MEM_RETSTATE_MASK, /* pruss_mem */
+ [1] = AM33XX_PER_MEM_RETSTATE_MASK, /* per_mem */
+ [2] = AM33XX_RAM_MEM_RETSTATE_MASK, /* ram_mem */
+ },
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET, /* pruss_mem */
+ [1] = PWRSTS_OFF_RET, /* per_mem */
+ [2] = PWRSTS_OFF_RET, /* ram_mem */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_ON, /* pruss_mem */
+ [1] = PWRSTS_ON, /* per_mem */
+ [2] = PWRSTS_ON, /* ram_mem */
+ },
+};
+
+static struct powerdomain mpu_33xx_pwrdm = {
+ .name = "mpu_pwrdm",
+ .voltdm = { .name = "mpu" },
+ .prcm_offs = AM33XX_PRM_MPU_MOD,
+ .pwrstctrl_offs = AM33XX_PM_MPU_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_MPU_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
+ .banks = 3,
+ .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK,
+ .mem_on_mask = {
+ [0] = AM33XX_MPU_L1_ONSTATE_MASK, /* mpu_l1 */
+ [1] = AM33XX_MPU_L2_ONSTATE_MASK, /* mpu_l2 */
+ [2] = AM33XX_MPU_RAM_ONSTATE_MASK, /* mpu_ram */
+ },
+ .mem_ret_mask = {
+ [0] = AM33XX_MPU_L1_RETSTATE_MASK, /* mpu_l1 */
+ [1] = AM33XX_MPU_L2_RETSTATE_MASK, /* mpu_l2 */
+ [2] = AM33XX_MPU_RAM_RETSTATE_MASK, /* mpu_ram */
+ },
+ .mem_pwrst_mask = {
+ [0] = AM33XX_MPU_L1_STATEST_MASK, /* mpu_l1 */
+ [1] = AM33XX_MPU_L2_STATEST_MASK, /* mpu_l2 */
+ [2] = AM33XX_MPU_RAM_STATEST_MASK, /* mpu_ram */
+ },
+ .mem_retst_mask = {
+ [0] = AM33XX_MPU_L1_RETSTATE_MASK, /* mpu_l1 */
+ [1] = AM33XX_MPU_L2_RETSTATE_MASK, /* mpu_l2 */
+ [2] = AM33XX_MPU_RAM_RETSTATE_MASK, /* mpu_ram */
+ },
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET, /* mpu_l1 */
+ [1] = PWRSTS_OFF_RET, /* mpu_l2 */
+ [2] = PWRSTS_OFF_RET, /* mpu_ram */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_ON, /* mpu_l1 */
+ [1] = PWRSTS_ON, /* mpu_l2 */
+ [2] = PWRSTS_ON, /* mpu_ram */
+ },
+};
+
+static struct powerdomain cefuse_33xx_pwrdm = {
+ .name = "cefuse_pwrdm",
+ .voltdm = { .name = "core" },
+ .prcm_offs = AM33XX_PRM_CEFUSE_MOD,
+ .pwrstctrl_offs = AM33XX_PM_CEFUSE_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_CEFUSE_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct powerdomain *powerdomains_am33xx[] __initdata = {
+ &gfx_33xx_pwrdm,
+ &rtc_33xx_pwrdm,
+ &wkup_33xx_pwrdm,
+ &per_33xx_pwrdm,
+ &mpu_33xx_pwrdm,
+ &cefuse_33xx_pwrdm,
+ NULL,
+};
+
+void __init am33xx_powerdomains_init(void)
+{
+ pwrdm_register_platform_funcs(&am33xx_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_am33xx);
+ pwrdm_complete_init();
+}
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 5/6] ARM: OMAP AM33xx: powerdomains: add AM335x support
@ 2012-05-21 18:42 ` Paul Walmsley
0 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-05-21 18:42 UTC (permalink / raw)
To: linux-arm-kernel
From: Vaibhav Hiremath <hvaibhav@ti.com>
Add offset & mask fields to struct powerdomain
In case of AM33xx family of devices, there is no consistency between
PWRSTCTRL & PWRSTST register offsers in PRM space, for example -
PRM_XXX PWRSTCTRL PWRSTST
=======================================
PRM_PER_MOD: 0x0C, 0x08
PRM_WKUP_MOD: 0x04, 0x08
PRM_MPU_MOD: 0x00, 0x04
PRM_DEVICE_MOD: NA, NA
And also, there is no consistency between bit-offsets inside
PWRSTCTRL & PWRSTST register, for example -
PRM_XXX LOGICRET MEMON MEMRET
=======================================
GFX_PWRCTRL: 2, 17, 6
PER_PWRCTRL: 3, 25, 29
MPU_PWRCTRL: 2, 18, 22
WKUP_PWRCTRL: 3, NA, NA
This means, we need to maintain and pass on all this information
in powerdomain handle; so adding fields for,
- PWRSTCTRL/ST register offset
- Logic retention state mask
- mem_on/ret/pwrst/retst mask
Currently, this fields is only applicable and used for AM33XX devices.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
[paul at pwsan.com: this patch is a combination of "Add offset & mask fields to
struct powerdomain" and the powerdomain portions of "ARM: OMAP3+: am33xx:
Add powerdomain & PRM support"; updated for 3.5]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/Makefile | 2
arch/arm/mach-omap2/io.c | 1
arch/arm/mach-omap2/powerdomain.h | 23 ++-
arch/arm/mach-omap2/powerdomain33xx.c | 229 +++++++++++++++++++++++++++
arch/arm/mach-omap2/powerdomains33xx_data.c | 185 ++++++++++++++++++++++
5 files changed, 438 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-omap2/powerdomain33xx.c
create mode 100644 arch/arm/mach-omap2/powerdomains33xx_data.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8e23151..44b779f 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -118,6 +118,8 @@ obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o
obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o
obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common)
+obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o
# PRCM clockdomain control
clockdomain-common += clockdomain.o
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 6cdc4ac..0a6fc47 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -446,6 +446,7 @@ void __init am33xx_init_early(void)
ti81xx_check_features();
omap_common_init_early();
am33xx_voltagedomains_init();
+ am33xx_powerdomains_init();
}
#endif
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index 0d72a8a..5856a2c 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -67,9 +67,9 @@
/*
* Maximum number of clockdomains that can be associated with a powerdomain.
- * CORE powerdomain on OMAP4 is the worst case
+ * PER powerdomain on AM33XX is the worst case
*/
-#define PWRDM_MAX_CLKDMS 9
+#define PWRDM_MAX_CLKDMS 11
/* XXX A completely arbitrary number. What is reasonable here? */
#define PWRDM_TRANSITION_BAILOUT 100000
@@ -92,6 +92,15 @@ struct powerdomain;
* @pwrdm_clkdms: Clockdomains in this powerdomain
* @node: list_head linking all powerdomains
* @voltdm_node: list_head linking all powerdomains in a voltagedomain
+ * @pwrstctrl_offs: (AM33XX only) XXX_PWRSTCTRL reg offset from prcm_offs
+ * @pwrstst_offs: (AM33XX only) XXX_PWRSTST reg offset from prcm_offs
+ * @logicretstate_mask: (AM33XX only) mask for logic retention bitfield
+ * in @pwrstctrl_offs
+ * @mem_on_mask: (AM33XX only) mask for mem on bitfield in @pwrstctrl_offs
+ * @mem_ret_mask: (AM33XX only) mask for mem ret bitfield in @pwrstctrl_offs
+ * @mem_pwrst_mask: (AM33XX only) mask for mem state bitfield in @pwrstst_offs
+ * @mem_retst_mask: (AM33XX only) mask for mem retention state bitfield
+ * in @pwrstctrl_offs
* @state:
* @state_counter:
* @timer:
@@ -121,6 +130,14 @@ struct powerdomain {
unsigned ret_logic_off_counter;
unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS];
+ const u8 pwrstctrl_offs;
+ const u8 pwrstst_offs;
+ const u32 logicretstate_mask;
+ const u32 mem_on_mask[PWRDM_MAX_MEM_BANKS];
+ const u32 mem_ret_mask[PWRDM_MAX_MEM_BANKS];
+ const u32 mem_pwrst_mask[PWRDM_MAX_MEM_BANKS];
+ const u32 mem_retst_mask[PWRDM_MAX_MEM_BANKS];
+
#ifdef CONFIG_PM_DEBUG
s64 timer;
s64 state_timer[PWRDM_MAX_PWRSTS];
@@ -223,10 +240,12 @@ bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
extern void omap242x_powerdomains_init(void);
extern void omap243x_powerdomains_init(void);
extern void omap3xxx_powerdomains_init(void);
+extern void am33xx_powerdomains_init(void);
extern void omap44xx_powerdomains_init(void);
extern struct pwrdm_ops omap2_pwrdm_operations;
extern struct pwrdm_ops omap3_pwrdm_operations;
+extern struct pwrdm_ops am33xx_pwrdm_operations;
extern struct pwrdm_ops omap4_pwrdm_operations;
/* Common Internal functions used across OMAP rev's */
diff --git a/arch/arm/mach-omap2/powerdomain33xx.c b/arch/arm/mach-omap2/powerdomain33xx.c
new file mode 100644
index 0000000..67c5663
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomain33xx.c
@@ -0,0 +1,229 @@
+/*
+ * AM33XX Powerdomain control
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from mach-omap2/powerdomain44xx.c written by Rajendra Nayak
+ * <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <plat/prcm.h>
+
+#include "powerdomain.h"
+#include "prm33xx.h"
+#include "prm-regbits-33xx.h"
+
+
+static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK,
+ (pwrst << OMAP_POWERSTATE_SHIFT),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= OMAP_POWERSTATE_MASK;
+ v >>= OMAP_POWERSTATE_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= OMAP_POWERSTATEST_MASK;
+ v >>= OMAP_POWERSTATEST_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
+ v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
+{
+ am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
+ (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+ am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK,
+ AM33XX_LASTPOWERSTATEENTERED_MASK,
+ pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->logicretstate_mask;
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= AM33XX_LOGICSTATEST_MASK;
+ v >>= AM33XX_LOGICSTATEST_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+ u32 v, m;
+
+ m = pwrdm->logicretstate_mask;
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->mem_on_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->mem_ret_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = pwrdm->mem_pwrst_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = pwrdm->mem_retst_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+ u32 c = 0;
+
+ /*
+ * REVISIT: pwrdm_wait_transition() may be better implemented
+ * via a callback and a periodic timer check -- how long do we expect
+ * powerdomain transitions to take?
+ */
+
+ /* XXX Is this udelay() value meaningful? */
+ while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs)
+ & OMAP_INTRANSITION_MASK) &&
+ (c++ < PWRDM_TRANSITION_BAILOUT))
+ udelay(1);
+
+ if (c > PWRDM_TRANSITION_BAILOUT) {
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
+ return -EAGAIN;
+ }
+
+ pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+ return 0;
+}
+
+struct pwrdm_ops am33xx_pwrdm_operations = {
+ .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst,
+ .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst,
+ .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst,
+ .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst,
+ .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst,
+ .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst,
+ .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst,
+ .pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst,
+ .pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange,
+ .pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst,
+ .pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst,
+ .pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst,
+ .pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst,
+ .pwrdm_wait_transition = am33xx_pwrdm_wait_transition,
+};
diff --git a/arch/arm/mach-omap2/powerdomains33xx_data.c b/arch/arm/mach-omap2/powerdomains33xx_data.c
new file mode 100644
index 0000000..869adb8
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains33xx_data.c
@@ -0,0 +1,185 @@
+/*
+ * AM33XX Power domain data
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "powerdomain.h"
+#include "prcm-common.h"
+#include "prm-regbits-33xx.h"
+#include "prm33xx.h"
+
+static struct powerdomain gfx_33xx_pwrdm = {
+ .name = "gfx_pwrdm",
+ .voltdm = { .name = "core" },
+ .prcm_offs = AM33XX_PRM_GFX_MOD,
+ .pwrstctrl_offs = AM33XX_PM_GFX_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_GFX_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
+ .banks = 1,
+ .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK,
+ .mem_on_mask = {
+ [0] = AM33XX_GFX_MEM_ONSTATE_MASK, /* gfx_mem */
+ },
+ .mem_ret_mask = {
+ [0] = AM33XX_GFX_MEM_RETSTATE_MASK, /* gfx_mem */
+ },
+ .mem_pwrst_mask = {
+ [0] = AM33XX_GFX_MEM_STATEST_MASK, /* gfx_mem */
+ },
+ .mem_retst_mask = {
+ [0] = AM33XX_GFX_MEM_RETSTATE_MASK, /* gfx_mem */
+ },
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET, /* gfx_mem */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_ON, /* gfx_mem */
+ },
+};
+
+static struct powerdomain rtc_33xx_pwrdm = {
+ .name = "rtc_pwrdm",
+ .voltdm = { .name = "rtc" },
+ .prcm_offs = AM33XX_PRM_RTC_MOD,
+ .pwrstctrl_offs = AM33XX_PM_RTC_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_RTC_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_ON,
+ .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK,
+};
+
+static struct powerdomain wkup_33xx_pwrdm = {
+ .name = "wkup_pwrdm",
+ .voltdm = { .name = "core" },
+ .prcm_offs = AM33XX_PRM_WKUP_MOD,
+ .pwrstctrl_offs = AM33XX_PM_WKUP_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_WKUP_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_ON,
+ .logicretstate_mask = AM33XX_LOGICRETSTATE_3_3_MASK,
+};
+
+static struct powerdomain per_33xx_pwrdm = {
+ .name = "per_pwrdm",
+ .voltdm = { .name = "core" },
+ .prcm_offs = AM33XX_PRM_PER_MOD,
+ .pwrstctrl_offs = AM33XX_PM_PER_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_PER_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
+ .banks = 3,
+ .logicretstate_mask = AM33XX_LOGICRETSTATE_3_3_MASK,
+ .mem_on_mask = {
+ [0] = AM33XX_PRUSS_MEM_ONSTATE_MASK, /* pruss_mem */
+ [1] = AM33XX_PER_MEM_ONSTATE_MASK, /* per_mem */
+ [2] = AM33XX_RAM_MEM_ONSTATE_MASK, /* ram_mem */
+ },
+ .mem_ret_mask = {
+ [0] = AM33XX_PRUSS_MEM_RETSTATE_MASK, /* pruss_mem */
+ [1] = AM33XX_PER_MEM_RETSTATE_MASK, /* per_mem */
+ [2] = AM33XX_RAM_MEM_RETSTATE_MASK, /* ram_mem */
+ },
+ .mem_pwrst_mask = {
+ [0] = AM33XX_PRUSS_MEM_STATEST_MASK, /* pruss_mem */
+ [1] = AM33XX_PER_MEM_STATEST_MASK, /* per_mem */
+ [2] = AM33XX_RAM_MEM_STATEST_MASK, /* ram_mem */
+ },
+ .mem_retst_mask = {
+ [0] = AM33XX_PRUSS_MEM_RETSTATE_MASK, /* pruss_mem */
+ [1] = AM33XX_PER_MEM_RETSTATE_MASK, /* per_mem */
+ [2] = AM33XX_RAM_MEM_RETSTATE_MASK, /* ram_mem */
+ },
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET, /* pruss_mem */
+ [1] = PWRSTS_OFF_RET, /* per_mem */
+ [2] = PWRSTS_OFF_RET, /* ram_mem */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_ON, /* pruss_mem */
+ [1] = PWRSTS_ON, /* per_mem */
+ [2] = PWRSTS_ON, /* ram_mem */
+ },
+};
+
+static struct powerdomain mpu_33xx_pwrdm = {
+ .name = "mpu_pwrdm",
+ .voltdm = { .name = "mpu" },
+ .prcm_offs = AM33XX_PRM_MPU_MOD,
+ .pwrstctrl_offs = AM33XX_PM_MPU_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_MPU_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
+ .banks = 3,
+ .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK,
+ .mem_on_mask = {
+ [0] = AM33XX_MPU_L1_ONSTATE_MASK, /* mpu_l1 */
+ [1] = AM33XX_MPU_L2_ONSTATE_MASK, /* mpu_l2 */
+ [2] = AM33XX_MPU_RAM_ONSTATE_MASK, /* mpu_ram */
+ },
+ .mem_ret_mask = {
+ [0] = AM33XX_MPU_L1_RETSTATE_MASK, /* mpu_l1 */
+ [1] = AM33XX_MPU_L2_RETSTATE_MASK, /* mpu_l2 */
+ [2] = AM33XX_MPU_RAM_RETSTATE_MASK, /* mpu_ram */
+ },
+ .mem_pwrst_mask = {
+ [0] = AM33XX_MPU_L1_STATEST_MASK, /* mpu_l1 */
+ [1] = AM33XX_MPU_L2_STATEST_MASK, /* mpu_l2 */
+ [2] = AM33XX_MPU_RAM_STATEST_MASK, /* mpu_ram */
+ },
+ .mem_retst_mask = {
+ [0] = AM33XX_MPU_L1_RETSTATE_MASK, /* mpu_l1 */
+ [1] = AM33XX_MPU_L2_RETSTATE_MASK, /* mpu_l2 */
+ [2] = AM33XX_MPU_RAM_RETSTATE_MASK, /* mpu_ram */
+ },
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET, /* mpu_l1 */
+ [1] = PWRSTS_OFF_RET, /* mpu_l2 */
+ [2] = PWRSTS_OFF_RET, /* mpu_ram */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_ON, /* mpu_l1 */
+ [1] = PWRSTS_ON, /* mpu_l2 */
+ [2] = PWRSTS_ON, /* mpu_ram */
+ },
+};
+
+static struct powerdomain cefuse_33xx_pwrdm = {
+ .name = "cefuse_pwrdm",
+ .voltdm = { .name = "core" },
+ .prcm_offs = AM33XX_PRM_CEFUSE_MOD,
+ .pwrstctrl_offs = AM33XX_PM_CEFUSE_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_CEFUSE_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct powerdomain *powerdomains_am33xx[] __initdata = {
+ &gfx_33xx_pwrdm,
+ &rtc_33xx_pwrdm,
+ &wkup_33xx_pwrdm,
+ &per_33xx_pwrdm,
+ &mpu_33xx_pwrdm,
+ &cefuse_33xx_pwrdm,
+ NULL,
+};
+
+void __init am33xx_powerdomains_init(void)
+{
+ pwrdm_register_platform_funcs(&am33xx_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_am33xx);
+ pwrdm_complete_init();
+}
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 6/6] ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations
2012-05-21 18:41 ` Paul Walmsley
@ 2012-05-21 18:42 ` Paul Walmsley
-1 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-05-21 18:42 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel
Cc: Kevin Hilman, Afzal Mohammed, Benoit Cousson, Tony Lindgren,
Rajendra Nayak, Vaibhav Bedia, Vaibhav Hiremath
From: Vaibhav Hiremath <hvaibhav@ti.com>
AM33XX PRCM module consist of, various clockdomains, in all
total we have 18 clockdomains available, with following
controlling options,
- SW Sleep: sw forced sleep transition
- SW Wakeup: sw forced wakeup transition
This patch adds all available clockdomain data, respective
clockdomain operations for AM33XX family of device, and also
integrates it into existing OMAP framework.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
CC: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
[paul@pwsan.com: removed CLKDM_NO_AUTODEPS from clockdomain flags, removed
unnecessary .clktrctrl_offs field; updated for 3.5]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/Makefile | 2
arch/arm/mach-omap2/clockdomain.h | 2
arch/arm/mach-omap2/clockdomain33xx.c | 74 ++++++++++
arch/arm/mach-omap2/clockdomains33xx_data.c | 196 +++++++++++++++++++++++++++
arch/arm/mach-omap2/io.c | 1
5 files changed, 275 insertions(+)
create mode 100644 arch/arm/mach-omap2/clockdomain33xx.c
create mode 100644 arch/arm/mach-omap2/clockdomains33xx_data.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 44b779f..cbb8bde 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -137,6 +137,8 @@ obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o
obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o
obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common)
+obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index f7b5860..72cb12b 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -195,6 +195,7 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh);
extern void __init omap242x_clockdomains_init(void);
extern void __init omap243x_clockdomains_init(void);
extern void __init omap3xxx_clockdomains_init(void);
+extern void __init am33xx_clockdomains_init(void);
extern void __init omap44xx_clockdomains_init(void);
extern void _clkdm_add_autodeps(struct clockdomain *clkdm);
extern void _clkdm_del_autodeps(struct clockdomain *clkdm);
@@ -202,6 +203,7 @@ extern void _clkdm_del_autodeps(struct clockdomain *clkdm);
extern struct clkdm_ops omap2_clkdm_operations;
extern struct clkdm_ops omap3_clkdm_operations;
extern struct clkdm_ops omap4_clkdm_operations;
+extern struct clkdm_ops am33xx_clkdm_operations;
extern struct clkdm_dep gfx_24xx_wkdeps[];
extern struct clkdm_dep dsp_24xx_wkdeps[];
diff --git a/arch/arm/mach-omap2/clockdomain33xx.c b/arch/arm/mach-omap2/clockdomain33xx.c
new file mode 100644
index 0000000..aca6388
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomain33xx.c
@@ -0,0 +1,74 @@
+/*
+ * AM33XX clockdomain control
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Derived from mach-omap2/clockdomain44xx.c written by Rajendra Nayak
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+
+#include "clockdomain.h"
+#include "cm33xx.h"
+
+
+static int am33xx_clkdm_sleep(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static int am33xx_clkdm_wakeup(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ return am33xx_clkdm_wakeup(clkdm);
+
+ return 0;
+}
+
+static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+
+ if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
+ am33xx_clkdm_sleep(clkdm);
+
+ return 0;
+}
+
+struct clkdm_ops am33xx_clkdm_operations = {
+ .clkdm_sleep = am33xx_clkdm_sleep,
+ .clkdm_wakeup = am33xx_clkdm_wakeup,
+ .clkdm_allow_idle = am33xx_clkdm_allow_idle,
+ .clkdm_deny_idle = am33xx_clkdm_deny_idle,
+ .clkdm_clk_enable = am33xx_clkdm_clk_enable,
+ .clkdm_clk_disable = am33xx_clkdm_clk_disable,
+};
diff --git a/arch/arm/mach-omap2/clockdomains33xx_data.c b/arch/arm/mach-omap2/clockdomains33xx_data.c
new file mode 100644
index 0000000..32c90fd
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains33xx_data.c
@@ -0,0 +1,196 @@
+/*
+ * AM33XX Clock Domain data.
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "cm.h"
+#include "cm33xx.h"
+#include "cm-regbits-33xx.h"
+
+static struct clockdomain l4ls_am33xx_clkdm = {
+ .name = "l4ls_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3s_am33xx_clkdm = {
+ .name = "l3s_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_L3S_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4fw_am33xx_clkdm = {
+ .name = "l4fw_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_L4FW_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3_am33xx_clkdm = {
+ .name = "l3_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_L3_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4hs_am33xx_clkdm = {
+ .name = "l4hs_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_L4HS_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain ocpwp_l3_am33xx_clkdm = {
+ .name = "ocpwp_l3_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain pruss_ocp_am33xx_clkdm = {
+ .name = "pruss_ocp_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_PRUSS_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain cpsw_125mhz_am33xx_clkdm = {
+ .name = "cpsw_125mhz_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_CPSW_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain lcdc_am33xx_clkdm = {
+ .name = "lcdc_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_LCDC_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain clk_24mhz_am33xx_clkdm = {
+ .name = "clk_24mhz_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_wkup_am33xx_clkdm = {
+ .name = "l4_wkup_clkdm",
+ .pwrdm = { .name = "wkup_pwrdm" },
+ .cm_inst = AM33XX_CM_WKUP_MOD,
+ .clkdm_offs = AM33XX_CM_WKUP_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3_aon_am33xx_clkdm = {
+ .name = "l3_aon_clkdm",
+ .pwrdm = { .name = "wkup_pwrdm" },
+ .cm_inst = AM33XX_CM_WKUP_MOD,
+ .clkdm_offs = AM33XX_CM_L3_AON_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_wkup_aon_am33xx_clkdm = {
+ .name = "l4_wkup_aon_clkdm",
+ .pwrdm = { .name = "wkup_pwrdm" },
+ .cm_inst = AM33XX_CM_WKUP_MOD,
+ .clkdm_offs = AM33XX_CM_L4_WKUP_AON_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain mpu_am33xx_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .cm_inst = AM33XX_CM_MPU_MOD,
+ .clkdm_offs = AM33XX_CM_MPU_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_rtc_am33xx_clkdm = {
+ .name = "l4_rtc_clkdm",
+ .pwrdm = { .name = "rtc_pwrdm" },
+ .cm_inst = AM33XX_CM_RTC_MOD,
+ .clkdm_offs = AM33XX_CM_RTC_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain gfx_l3_am33xx_clkdm = {
+ .name = "gfx_l3_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .cm_inst = AM33XX_CM_GFX_MOD,
+ .clkdm_offs = AM33XX_CM_GFX_L3_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain gfx_l4ls_gfx_am33xx_clkdm = {
+ .name = "gfx_l4ls_gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .cm_inst = AM33XX_CM_GFX_MOD,
+ .clkdm_offs = AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_cefuse_am33xx_clkdm = {
+ .name = "l4_cefuse_clkdm",
+ .pwrdm = { .name = "cefuse_pwrdm" },
+ .cm_inst = AM33XX_CM_CEFUSE_MOD,
+ .clkdm_offs = AM33XX_CM_CEFUSE_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain *clockdomains_am33xx[] __initdata = {
+ &l4ls_am33xx_clkdm,
+ &l3s_am33xx_clkdm,
+ &l4fw_am33xx_clkdm,
+ &l3_am33xx_clkdm,
+ &l4hs_am33xx_clkdm,
+ &ocpwp_l3_am33xx_clkdm,
+ &pruss_ocp_am33xx_clkdm,
+ &cpsw_125mhz_am33xx_clkdm,
+ &lcdc_am33xx_clkdm,
+ &clk_24mhz_am33xx_clkdm,
+ &l4_wkup_am33xx_clkdm,
+ &l3_aon_am33xx_clkdm,
+ &l4_wkup_aon_am33xx_clkdm,
+ &mpu_am33xx_clkdm,
+ &l4_rtc_am33xx_clkdm,
+ &gfx_l3_am33xx_clkdm,
+ &gfx_l4ls_gfx_am33xx_clkdm,
+ &l4_cefuse_am33xx_clkdm,
+ NULL,
+};
+
+void __init am33xx_clockdomains_init(void)
+{
+ clkdm_register_platform_funcs(&am33xx_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_am33xx);
+ clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 0a6fc47..bacab41 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -447,6 +447,7 @@ void __init am33xx_init_early(void)
omap_common_init_early();
am33xx_voltagedomains_init();
am33xx_powerdomains_init();
+ am33xx_clockdomains_init();
}
#endif
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 6/6] ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations
@ 2012-05-21 18:42 ` Paul Walmsley
0 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-05-21 18:42 UTC (permalink / raw)
To: linux-arm-kernel
From: Vaibhav Hiremath <hvaibhav@ti.com>
AM33XX PRCM module consist of, various clockdomains, in all
total we have 18 clockdomains available, with following
controlling options,
- SW Sleep: sw forced sleep transition
- SW Wakeup: sw forced wakeup transition
This patch adds all available clockdomain data, respective
clockdomain operations for AM33XX family of device, and also
integrates it into existing OMAP framework.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
CC: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
[paul at pwsan.com: removed CLKDM_NO_AUTODEPS from clockdomain flags, removed
unnecessary .clktrctrl_offs field; updated for 3.5]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/Makefile | 2
arch/arm/mach-omap2/clockdomain.h | 2
arch/arm/mach-omap2/clockdomain33xx.c | 74 ++++++++++
arch/arm/mach-omap2/clockdomains33xx_data.c | 196 +++++++++++++++++++++++++++
arch/arm/mach-omap2/io.c | 1
5 files changed, 275 insertions(+)
create mode 100644 arch/arm/mach-omap2/clockdomain33xx.c
create mode 100644 arch/arm/mach-omap2/clockdomains33xx_data.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 44b779f..cbb8bde 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -137,6 +137,8 @@ obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o
obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o
obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common)
+obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index f7b5860..72cb12b 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -195,6 +195,7 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh);
extern void __init omap242x_clockdomains_init(void);
extern void __init omap243x_clockdomains_init(void);
extern void __init omap3xxx_clockdomains_init(void);
+extern void __init am33xx_clockdomains_init(void);
extern void __init omap44xx_clockdomains_init(void);
extern void _clkdm_add_autodeps(struct clockdomain *clkdm);
extern void _clkdm_del_autodeps(struct clockdomain *clkdm);
@@ -202,6 +203,7 @@ extern void _clkdm_del_autodeps(struct clockdomain *clkdm);
extern struct clkdm_ops omap2_clkdm_operations;
extern struct clkdm_ops omap3_clkdm_operations;
extern struct clkdm_ops omap4_clkdm_operations;
+extern struct clkdm_ops am33xx_clkdm_operations;
extern struct clkdm_dep gfx_24xx_wkdeps[];
extern struct clkdm_dep dsp_24xx_wkdeps[];
diff --git a/arch/arm/mach-omap2/clockdomain33xx.c b/arch/arm/mach-omap2/clockdomain33xx.c
new file mode 100644
index 0000000..aca6388
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomain33xx.c
@@ -0,0 +1,74 @@
+/*
+ * AM33XX clockdomain control
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Derived from mach-omap2/clockdomain44xx.c written by Rajendra Nayak
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+
+#include "clockdomain.h"
+#include "cm33xx.h"
+
+
+static int am33xx_clkdm_sleep(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static int am33xx_clkdm_wakeup(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ return am33xx_clkdm_wakeup(clkdm);
+
+ return 0;
+}
+
+static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+
+ if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
+ am33xx_clkdm_sleep(clkdm);
+
+ return 0;
+}
+
+struct clkdm_ops am33xx_clkdm_operations = {
+ .clkdm_sleep = am33xx_clkdm_sleep,
+ .clkdm_wakeup = am33xx_clkdm_wakeup,
+ .clkdm_allow_idle = am33xx_clkdm_allow_idle,
+ .clkdm_deny_idle = am33xx_clkdm_deny_idle,
+ .clkdm_clk_enable = am33xx_clkdm_clk_enable,
+ .clkdm_clk_disable = am33xx_clkdm_clk_disable,
+};
diff --git a/arch/arm/mach-omap2/clockdomains33xx_data.c b/arch/arm/mach-omap2/clockdomains33xx_data.c
new file mode 100644
index 0000000..32c90fd
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains33xx_data.c
@@ -0,0 +1,196 @@
+/*
+ * AM33XX Clock Domain data.
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "cm.h"
+#include "cm33xx.h"
+#include "cm-regbits-33xx.h"
+
+static struct clockdomain l4ls_am33xx_clkdm = {
+ .name = "l4ls_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3s_am33xx_clkdm = {
+ .name = "l3s_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_L3S_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4fw_am33xx_clkdm = {
+ .name = "l4fw_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_L4FW_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3_am33xx_clkdm = {
+ .name = "l3_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_L3_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4hs_am33xx_clkdm = {
+ .name = "l4hs_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_L4HS_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain ocpwp_l3_am33xx_clkdm = {
+ .name = "ocpwp_l3_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain pruss_ocp_am33xx_clkdm = {
+ .name = "pruss_ocp_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_PRUSS_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain cpsw_125mhz_am33xx_clkdm = {
+ .name = "cpsw_125mhz_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_CPSW_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain lcdc_am33xx_clkdm = {
+ .name = "lcdc_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_LCDC_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain clk_24mhz_am33xx_clkdm = {
+ .name = "clk_24mhz_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_wkup_am33xx_clkdm = {
+ .name = "l4_wkup_clkdm",
+ .pwrdm = { .name = "wkup_pwrdm" },
+ .cm_inst = AM33XX_CM_WKUP_MOD,
+ .clkdm_offs = AM33XX_CM_WKUP_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3_aon_am33xx_clkdm = {
+ .name = "l3_aon_clkdm",
+ .pwrdm = { .name = "wkup_pwrdm" },
+ .cm_inst = AM33XX_CM_WKUP_MOD,
+ .clkdm_offs = AM33XX_CM_L3_AON_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_wkup_aon_am33xx_clkdm = {
+ .name = "l4_wkup_aon_clkdm",
+ .pwrdm = { .name = "wkup_pwrdm" },
+ .cm_inst = AM33XX_CM_WKUP_MOD,
+ .clkdm_offs = AM33XX_CM_L4_WKUP_AON_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain mpu_am33xx_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .cm_inst = AM33XX_CM_MPU_MOD,
+ .clkdm_offs = AM33XX_CM_MPU_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_rtc_am33xx_clkdm = {
+ .name = "l4_rtc_clkdm",
+ .pwrdm = { .name = "rtc_pwrdm" },
+ .cm_inst = AM33XX_CM_RTC_MOD,
+ .clkdm_offs = AM33XX_CM_RTC_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain gfx_l3_am33xx_clkdm = {
+ .name = "gfx_l3_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .cm_inst = AM33XX_CM_GFX_MOD,
+ .clkdm_offs = AM33XX_CM_GFX_L3_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain gfx_l4ls_gfx_am33xx_clkdm = {
+ .name = "gfx_l4ls_gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .cm_inst = AM33XX_CM_GFX_MOD,
+ .clkdm_offs = AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_cefuse_am33xx_clkdm = {
+ .name = "l4_cefuse_clkdm",
+ .pwrdm = { .name = "cefuse_pwrdm" },
+ .cm_inst = AM33XX_CM_CEFUSE_MOD,
+ .clkdm_offs = AM33XX_CM_CEFUSE_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain *clockdomains_am33xx[] __initdata = {
+ &l4ls_am33xx_clkdm,
+ &l3s_am33xx_clkdm,
+ &l4fw_am33xx_clkdm,
+ &l3_am33xx_clkdm,
+ &l4hs_am33xx_clkdm,
+ &ocpwp_l3_am33xx_clkdm,
+ &pruss_ocp_am33xx_clkdm,
+ &cpsw_125mhz_am33xx_clkdm,
+ &lcdc_am33xx_clkdm,
+ &clk_24mhz_am33xx_clkdm,
+ &l4_wkup_am33xx_clkdm,
+ &l3_aon_am33xx_clkdm,
+ &l4_wkup_aon_am33xx_clkdm,
+ &mpu_am33xx_clkdm,
+ &l4_rtc_am33xx_clkdm,
+ &gfx_l3_am33xx_clkdm,
+ &gfx_l4ls_gfx_am33xx_clkdm,
+ &l4_cefuse_am33xx_clkdm,
+ NULL,
+};
+
+void __init am33xx_clockdomains_init(void)
+{
+ clkdm_register_platform_funcs(&am33xx_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_am33xx);
+ clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 0a6fc47..bacab41 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -447,6 +447,7 @@ void __init am33xx_init_early(void)
omap_common_init_early();
am33xx_voltagedomains_init();
am33xx_powerdomains_init();
+ am33xx_clockdomains_init();
}
#endif
^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data
2012-05-21 18:41 ` Paul Walmsley
@ 2012-06-11 1:20 ` Paul Walmsley
-1 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-06-11 1:20 UTC (permalink / raw)
To: Vaibhav Hiremath, Tony Lindgren, Afzal Mohammed, linux-omap,
linux-arm-kernel
Cc: Kevin Hilman, Benoit Cousson, Rajendra Nayak
Hi Vaibhav, Afzal, Tony,
On Mon, 21 May 2012, Paul Walmsley wrote:
> From: Vaibhav Hiremath <hvaibhav@ti.com>
>
> Currently dummy voltage domain data is being created
> in order to succeed boot process, nothing has been done
> w.r.t actual hardware (voltage control).
>
> Also, hook up the AM33XX voltage domain to OMAP framework.
I had to update this patch again for v3.5 to account for the lack of
am33xx_init_early(). So now this patch has to add it (updated patch
below).
But it seems to me that I must be missing something. Are we missing a
prerequisite patch for this series from mainline? Or is this some
casualty of kicking out the board file?
If the latter, how do we make sure that am33xx_init_early() is called at
the right time?
Once we get this sorted out, I'll send the pull request.
Branch on git://git.pwsan.com/linux-2.6 in 'am33xx_prcm_devel_3.6'
- Paul
>From 127240db05c0d381a50712a320439c5679fb22da Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Sun, 10 Jun 2012 18:56:14 -0600
Subject: [PATCH] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data
Currently dummy voltage domain data is being created
in order to succeed boot process, nothing has been done
w.r.t actual hardware (voltage control).
Also, hook up the AM33XX voltage domain to OMAP framework.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
[paul@pwsan.com: updated for 3.5]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/Makefile | 1 +
arch/arm/mach-omap2/common.h | 1 +
arch/arm/mach-omap2/io.c | 13 +++++++-
arch/arm/mach-omap2/voltage.h | 1 +
arch/arm/mach-omap2/voltagedomains33xx_data.c | 43 +++++++++++++++++++++++++
5 files changed, 58 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-omap2/voltagedomains33xx_data.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index fa742f3..6a3aef6 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -99,6 +99,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
+obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index be9dfd1..dad91e2 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -128,6 +128,7 @@ void omap3430_init_early(void);
void omap35xx_init_early(void);
void omap3630_init_early(void);
void omap3_init_early(void); /* Do not use this one */
+void am33xx_init_early(void);
void am35xx_init_early(void);
void ti81xx_init_early(void);
void omap4430_init_early(void);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 8d014ba..37ecc71 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -381,11 +381,22 @@ void __init omap2430_init_late(void)
}
#endif
+#ifdef CONFIG_SOC_AM33XX
+void __init am33xx_init_early(void)
+{
+ omap2_set_globals_am33xx();
+ omap3xxx_check_revision();
+ ti81xx_check_features();
+ omap_common_init_early();
+ am33xx_voltagedomains_init();
+}
+#endif
+
/*
* Currently only board-omap3beagle.c should call this because of the
* same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
*/
-#ifdef CONFIG_ARCH_OMAP3
+#ifdef CONFIG_SOC_OMAP3430
void __init omap3_init_early(void)
{
omap2_set_globals_3xxx();
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 16a1b09..a7c43c1 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -156,6 +156,7 @@ int omap_voltage_late_init(void);
extern void omap2xxx_voltagedomains_init(void);
extern void omap3xxx_voltagedomains_init(void);
+extern void am33xx_voltagedomains_init(void);
extern void omap44xx_voltagedomains_init(void);
struct voltagedomain *voltdm_lookup(const char *name);
diff --git a/arch/arm/mach-omap2/voltagedomains33xx_data.c b/arch/arm/mach-omap2/voltagedomains33xx_data.c
new file mode 100644
index 0000000..965458d
--- /dev/null
+++ b/arch/arm/mach-omap2/voltagedomains33xx_data.c
@@ -0,0 +1,43 @@
+/*
+ * AM33XX voltage domain data
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "voltage.h"
+
+static struct voltagedomain am33xx_voltdm_mpu = {
+ .name = "mpu",
+};
+
+static struct voltagedomain am33xx_voltdm_core = {
+ .name = "core",
+};
+
+static struct voltagedomain am33xx_voltdm_rtc = {
+ .name = "rtc",
+};
+
+static struct voltagedomain *voltagedomains_am33xx[] __initdata = {
+ &am33xx_voltdm_mpu,
+ &am33xx_voltdm_core,
+ &am33xx_voltdm_rtc,
+ NULL,
+};
+
+void __init am33xx_voltagedomains_init(void)
+{
+ voltdm_init(voltagedomains_am33xx);
+}
--
1.7.10
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data
@ 2012-06-11 1:20 ` Paul Walmsley
0 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-06-11 1:20 UTC (permalink / raw)
To: linux-arm-kernel
Hi Vaibhav, Afzal, Tony,
On Mon, 21 May 2012, Paul Walmsley wrote:
> From: Vaibhav Hiremath <hvaibhav@ti.com>
>
> Currently dummy voltage domain data is being created
> in order to succeed boot process, nothing has been done
> w.r.t actual hardware (voltage control).
>
> Also, hook up the AM33XX voltage domain to OMAP framework.
I had to update this patch again for v3.5 to account for the lack of
am33xx_init_early(). So now this patch has to add it (updated patch
below).
But it seems to me that I must be missing something. Are we missing a
prerequisite patch for this series from mainline? Or is this some
casualty of kicking out the board file?
If the latter, how do we make sure that am33xx_init_early() is called at
the right time?
Once we get this sorted out, I'll send the pull request.
Branch on git://git.pwsan.com/linux-2.6 in 'am33xx_prcm_devel_3.6'
- Paul
>From 127240db05c0d381a50712a320439c5679fb22da Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Sun, 10 Jun 2012 18:56:14 -0600
Subject: [PATCH] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data
Currently dummy voltage domain data is being created
in order to succeed boot process, nothing has been done
w.r.t actual hardware (voltage control).
Also, hook up the AM33XX voltage domain to OMAP framework.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
[paul at pwsan.com: updated for 3.5]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/Makefile | 1 +
arch/arm/mach-omap2/common.h | 1 +
arch/arm/mach-omap2/io.c | 13 +++++++-
arch/arm/mach-omap2/voltage.h | 1 +
arch/arm/mach-omap2/voltagedomains33xx_data.c | 43 +++++++++++++++++++++++++
5 files changed, 58 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-omap2/voltagedomains33xx_data.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index fa742f3..6a3aef6 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -99,6 +99,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
+obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index be9dfd1..dad91e2 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -128,6 +128,7 @@ void omap3430_init_early(void);
void omap35xx_init_early(void);
void omap3630_init_early(void);
void omap3_init_early(void); /* Do not use this one */
+void am33xx_init_early(void);
void am35xx_init_early(void);
void ti81xx_init_early(void);
void omap4430_init_early(void);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 8d014ba..37ecc71 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -381,11 +381,22 @@ void __init omap2430_init_late(void)
}
#endif
+#ifdef CONFIG_SOC_AM33XX
+void __init am33xx_init_early(void)
+{
+ omap2_set_globals_am33xx();
+ omap3xxx_check_revision();
+ ti81xx_check_features();
+ omap_common_init_early();
+ am33xx_voltagedomains_init();
+}
+#endif
+
/*
* Currently only board-omap3beagle.c should call this because of the
* same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
*/
-#ifdef CONFIG_ARCH_OMAP3
+#ifdef CONFIG_SOC_OMAP3430
void __init omap3_init_early(void)
{
omap2_set_globals_3xxx();
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 16a1b09..a7c43c1 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -156,6 +156,7 @@ int omap_voltage_late_init(void);
extern void omap2xxx_voltagedomains_init(void);
extern void omap3xxx_voltagedomains_init(void);
+extern void am33xx_voltagedomains_init(void);
extern void omap44xx_voltagedomains_init(void);
struct voltagedomain *voltdm_lookup(const char *name);
diff --git a/arch/arm/mach-omap2/voltagedomains33xx_data.c b/arch/arm/mach-omap2/voltagedomains33xx_data.c
new file mode 100644
index 0000000..965458d
--- /dev/null
+++ b/arch/arm/mach-omap2/voltagedomains33xx_data.c
@@ -0,0 +1,43 @@
+/*
+ * AM33XX voltage domain data
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "voltage.h"
+
+static struct voltagedomain am33xx_voltdm_mpu = {
+ .name = "mpu",
+};
+
+static struct voltagedomain am33xx_voltdm_core = {
+ .name = "core",
+};
+
+static struct voltagedomain am33xx_voltdm_rtc = {
+ .name = "rtc",
+};
+
+static struct voltagedomain *voltagedomains_am33xx[] __initdata = {
+ &am33xx_voltdm_mpu,
+ &am33xx_voltdm_core,
+ &am33xx_voltdm_rtc,
+ NULL,
+};
+
+void __init am33xx_voltagedomains_init(void)
+{
+ voltdm_init(voltagedomains_am33xx);
+}
--
1.7.10
^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data
2012-06-11 1:20 ` Paul Walmsley
@ 2012-06-11 9:19 ` Vaibhav Hiremath
-1 siblings, 0 replies; 22+ messages in thread
From: Vaibhav Hiremath @ 2012-06-11 9:19 UTC (permalink / raw)
To: Paul Walmsley
Cc: Tony Lindgren, Afzal Mohammed, linux-omap, linux-arm-kernel,
Kevin Hilman, Benoit Cousson, Rajendra Nayak
On 6/11/2012 6:50 AM, Paul Walmsley wrote:
> Hi Vaibhav, Afzal, Tony,
>
> On Mon, 21 May 2012, Paul Walmsley wrote:
>
>> From: Vaibhav Hiremath <hvaibhav@ti.com>
>>
>> Currently dummy voltage domain data is being created
>> in order to succeed boot process, nothing has been done
>> w.r.t actual hardware (voltage control).
>>
>> Also, hook up the AM33XX voltage domain to OMAP framework.
>
> I had to update this patch again for v3.5 to account for the lack of
> am33xx_init_early(). So now this patch has to add it (updated patch
> below).
>
Paul,
I think this is not required, since Tony has already accepted the patch
which has this implementation (available on linux-omap/master).
Please refer to the commit,
commit 08f3098928c991560408e8c71d4af8b1a3ff2d67
Author: Afzal Mohammed <afzal@ti.com>
Date: Fri May 11 00:38:49 2012 +0530
ARM: OMAP2+: am33xx: Add AM335XEVM machine support
Thanks,
Vaibhav
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data
@ 2012-06-11 9:19 ` Vaibhav Hiremath
0 siblings, 0 replies; 22+ messages in thread
From: Vaibhav Hiremath @ 2012-06-11 9:19 UTC (permalink / raw)
To: linux-arm-kernel
On 6/11/2012 6:50 AM, Paul Walmsley wrote:
> Hi Vaibhav, Afzal, Tony,
>
> On Mon, 21 May 2012, Paul Walmsley wrote:
>
>> From: Vaibhav Hiremath <hvaibhav@ti.com>
>>
>> Currently dummy voltage domain data is being created
>> in order to succeed boot process, nothing has been done
>> w.r.t actual hardware (voltage control).
>>
>> Also, hook up the AM33XX voltage domain to OMAP framework.
>
> I had to update this patch again for v3.5 to account for the lack of
> am33xx_init_early(). So now this patch has to add it (updated patch
> below).
>
Paul,
I think this is not required, since Tony has already accepted the patch
which has this implementation (available on linux-omap/master).
Please refer to the commit,
commit 08f3098928c991560408e8c71d4af8b1a3ff2d67
Author: Afzal Mohammed <afzal@ti.com>
Date: Fri May 11 00:38:49 2012 +0530
ARM: OMAP2+: am33xx: Add AM335XEVM machine support
Thanks,
Vaibhav
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data
2012-06-11 9:19 ` Vaibhav Hiremath
@ 2012-06-11 16:10 ` Paul Walmsley
-1 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-06-11 16:10 UTC (permalink / raw)
To: Vaibhav Hiremath
Cc: Tony Lindgren, Afzal Mohammed, linux-omap, linux-arm-kernel,
Kevin Hilman, Benoit Cousson, Rajendra Nayak
Hi Vaibhav,
On Mon, 11 Jun 2012, Vaibhav Hiremath wrote:
> I think this is not required, since Tony has already accepted the patch
> which has this implementation (available on linux-omap/master).
> Please refer to the commit,
>
> commit 08f3098928c991560408e8c71d4af8b1a3ff2d67
> Author: Afzal Mohammed <afzal@ti.com>
> Date: Fri May 11 00:38:49 2012 +0530
>
> ARM: OMAP2+: am33xx: Add AM335XEVM machine support
Thanks, that's what I need. Looks like our series needs to be based on
this commit, rather than mainline.
- Paul
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data
@ 2012-06-11 16:10 ` Paul Walmsley
0 siblings, 0 replies; 22+ messages in thread
From: Paul Walmsley @ 2012-06-11 16:10 UTC (permalink / raw)
To: linux-arm-kernel
Hi Vaibhav,
On Mon, 11 Jun 2012, Vaibhav Hiremath wrote:
> I think this is not required, since Tony has already accepted the patch
> which has this implementation (available on linux-omap/master).
> Please refer to the commit,
>
> commit 08f3098928c991560408e8c71d4af8b1a3ff2d67
> Author: Afzal Mohammed <afzal@ti.com>
> Date: Fri May 11 00:38:49 2012 +0530
>
> ARM: OMAP2+: am33xx: Add AM335XEVM machine support
Thanks, that's what I need. Looks like our series needs to be based on
this commit, rather than mainline.
- Paul
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data
2012-06-11 16:10 ` Paul Walmsley
@ 2012-06-11 17:16 ` Vaibhav Hiremath
-1 siblings, 0 replies; 22+ messages in thread
From: Vaibhav Hiremath @ 2012-06-11 17:16 UTC (permalink / raw)
To: Paul Walmsley
Cc: Tony Lindgren, Afzal Mohammed, linux-omap, linux-arm-kernel,
Kevin Hilman, Benoit Cousson, Rajendra Nayak
On 6/11/2012 9:40 PM, Paul Walmsley wrote:
> Hi Vaibhav,
>
> On Mon, 11 Jun 2012, Vaibhav Hiremath wrote:
>
>> I think this is not required, since Tony has already accepted the patch
>> which has this implementation (available on linux-omap/master).
>> Please refer to the commit,
>>
>> commit 08f3098928c991560408e8c71d4af8b1a3ff2d67
>> Author: Afzal Mohammed <afzal@ti.com>
>> Date: Fri May 11 00:38:49 2012 +0530
>>
>> ARM: OMAP2+: am33xx: Add AM335XEVM machine support
>
> Thanks, that's what I need. Looks like our series needs to be based on
> this commit, rather than mainline.
>
Yes, its already done. As you know I maintain this branch which always
follows mainline and also integrates all the changes discussed on the list -
https://github.com/hvaibhav/am335x-linux/tree/am335x-upstream-staging
Thanks,
Vaibhav
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data
@ 2012-06-11 17:16 ` Vaibhav Hiremath
0 siblings, 0 replies; 22+ messages in thread
From: Vaibhav Hiremath @ 2012-06-11 17:16 UTC (permalink / raw)
To: linux-arm-kernel
On 6/11/2012 9:40 PM, Paul Walmsley wrote:
> Hi Vaibhav,
>
> On Mon, 11 Jun 2012, Vaibhav Hiremath wrote:
>
>> I think this is not required, since Tony has already accepted the patch
>> which has this implementation (available on linux-omap/master).
>> Please refer to the commit,
>>
>> commit 08f3098928c991560408e8c71d4af8b1a3ff2d67
>> Author: Afzal Mohammed <afzal@ti.com>
>> Date: Fri May 11 00:38:49 2012 +0530
>>
>> ARM: OMAP2+: am33xx: Add AM335XEVM machine support
>
> Thanks, that's what I need. Looks like our series needs to be based on
> this commit, rather than mainline.
>
Yes, its already done. As you know I maintain this branch which always
follows mainline and also integrates all the changes discussed on the list -
https://github.com/hvaibhav/am335x-linux/tree/am335x-upstream-staging
Thanks,
Vaibhav
^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2012-06-11 17:16 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-05-21 18:41 [PATCH 0/6] ARM: OMAP AM33xx: PRM/CM support for 3.6 Paul Walmsley
2012-05-21 18:41 ` Paul Walmsley
2012-05-21 18:41 ` [PATCH 1/6] ARM: OMAP2+: control: Add AM33XX control reg & sec clkctrl offset Paul Walmsley
2012-05-21 18:41 ` Paul Walmsley
2012-05-21 18:41 ` [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data Paul Walmsley
2012-05-21 18:41 ` Paul Walmsley
2012-06-11 1:20 ` Paul Walmsley
2012-06-11 1:20 ` Paul Walmsley
2012-06-11 9:19 ` Vaibhav Hiremath
2012-06-11 9:19 ` Vaibhav Hiremath
2012-06-11 16:10 ` Paul Walmsley
2012-06-11 16:10 ` Paul Walmsley
2012-06-11 17:16 ` Vaibhav Hiremath
2012-06-11 17:16 ` Vaibhav Hiremath
2012-05-21 18:41 ` [PATCH 3/6] ARM: OMAP AM33xx: PRM: add PRM support Paul Walmsley
2012-05-21 18:41 ` Paul Walmsley
2012-05-21 18:42 ` [PATCH 4/6] ARM: OMAP AM33xx: CM: Introduce AM33xx CM APIs and register level details Paul Walmsley
2012-05-21 18:42 ` Paul Walmsley
2012-05-21 18:42 ` [PATCH 5/6] ARM: OMAP AM33xx: powerdomains: add AM335x support Paul Walmsley
2012-05-21 18:42 ` Paul Walmsley
2012-05-21 18:42 ` [PATCH 6/6] ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations Paul Walmsley
2012-05-21 18:42 ` Paul Walmsley
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.