[PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support

[PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support

[Richard Zhao]

Changes since v1:

 - rebase to latest clk and pinctrl base
 - fix according v1 comments.

You can also get at:
https://github.com/riczhao/kernel-imx/tree/topics/audio

Richard Zhao (11):
  dma: imx-sdma: make channel0 operations atomic
  ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support
  ASoC: imx-audmux: add pinctrl support
  ARM: dts: imx6q-sabrelite: add audmux pinctrl support
  ARM: imx6q: add ssi1_ipg clk_lookup
  ASoC: fsl_ssi: convert to use devm_clk_get
  ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000
  ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000
  ARM: dts: imx6q-sabrelite: add serial2 pinctrl support
  ARM: imx6q: change clkdev device name from xxxx.uart to xxxx.serial
  ARM: imx6q: change clkdev device name from xxxx.enet to xxxx.ethernet

 arch/arm/boot/dts/imx6q-sabrelite.dts |   20 +++++++++++
 arch/arm/boot/dts/imx6q.dtsi          |   23 +++++++++++++
 arch/arm/mach-imx/clk-imx6q.c         |   35 +++++++++++---------
 arch/arm/mach-imx/mach-imx6q.c        |   28 ++++++++++++++++
 drivers/dma/imx-sdma.c                |   57 ++++++++++++++++++---------------
 sound/soc/fsl/fsl_ssi.c               |    7 +---
 sound/soc/fsl/imx-audmux.c            |    8 +++++
 7 files changed, 132 insertions(+), 46 deletions(-)

-- 
1.7.5.4

[PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support

[Richard Zhao]

Changes since v1:

 - rebase to latest clk and pinctrl base
 - fix according v1 comments.

You can also get at:
https://github.com/riczhao/kernel-imx/tree/topics/audio

Richard Zhao (11):
  dma: imx-sdma: make channel0 operations atomic
  ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support
  ASoC: imx-audmux: add pinctrl support
  ARM: dts: imx6q-sabrelite: add audmux pinctrl support
  ARM: imx6q: add ssi1_ipg clk_lookup
  ASoC: fsl_ssi: convert to use devm_clk_get
  ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000
  ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000
  ARM: dts: imx6q-sabrelite: add serial2 pinctrl support
  ARM: imx6q: change clkdev device name from xxxx.uart to xxxx.serial
  ARM: imx6q: change clkdev device name from xxxx.enet to xxxx.ethernet

 arch/arm/boot/dts/imx6q-sabrelite.dts |   20 +++++++++++
 arch/arm/boot/dts/imx6q.dtsi          |   23 +++++++++++++
 arch/arm/mach-imx/clk-imx6q.c         |   35 +++++++++++---------
 arch/arm/mach-imx/mach-imx6q.c        |   28 ++++++++++++++++
 drivers/dma/imx-sdma.c                |   57 ++++++++++++++++++---------------
 sound/soc/fsl/fsl_ssi.c               |    7 +---
 sound/soc/fsl/imx-audmux.c            |    8 +++++
 7 files changed, 132 insertions(+), 46 deletions(-)

-- 
1.7.5.4

[PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic

[Richard Zhao]

device_prep_dma_cyclic may be call in audio trigger function which is
atomic context, so we make it atomic too.

 - change channel0 lock to spinlock.
 - Use polling to wait for channel0 finish running.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 drivers/dma/imx-sdma.c |   57 ++++++++++++++++++++++++++---------------------
 1 files changed, 31 insertions(+), 26 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index fddccae..4fd48eb 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -24,7 +24,7 @@
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
-#include <linux/wait.h>
+#include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/semaphore.h>
 #include <linux/spinlock.h>
@@ -324,7 +324,7 @@ struct sdma_engine {
 	struct dma_device		dma_device;
 	struct clk			*clk_ipg;
 	struct clk			*clk_ahb;
-	struct mutex			channel_0_lock;
+	spinlock_t		channel_0_lock;
 	struct sdma_script_start_addrs	*script_addrs;
 };
 
@@ -402,19 +402,27 @@ static void sdma_enable_channel(struct sdma_engine *sdma, int channel)
 }
 
 /*
- * sdma_run_channel - run a channel and wait till it's done
+ * sdma_run_channel0 - run a channel and wait till it's done
  */
-static int sdma_run_channel(struct sdma_channel *sdmac)
+static int sdma_run_channel0(struct sdma_engine *sdma)
 {
-	struct sdma_engine *sdma = sdmac->sdma;
-	int channel = sdmac->channel;
 	int ret;
+	unsigned long timeout = 500;
 
-	init_completion(&sdmac->done);
+	sdma_enable_channel(sdma, 0);
 
-	sdma_enable_channel(sdma, channel);
+	while (!(ret = readl_relaxed(sdma->regs + SDMA_H_INTR) & 1)) {
+		if (timeout-- <= 0)
+			break;
+		udelay(1);
+	}
 
-	ret = wait_for_completion_timeout(&sdmac->done, HZ);
+	if (ret) {
+		/* Clear the interrupt status */
+		writel_relaxed(ret, sdma->regs + SDMA_H_INTR);
+	} else {
+		dev_err(sdma->dev, "Timeout waiting for CH0 ready\n");
+	}
 
 	return ret ? 0 : -ETIMEDOUT;
 }
@@ -426,17 +434,17 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
 	void *buf_virt;
 	dma_addr_t buf_phys;
 	int ret;
-
-	mutex_lock(&sdma->channel_0_lock);
+	unsigned long flags;
 
 	buf_virt = dma_alloc_coherent(NULL,
 			size,
 			&buf_phys, GFP_KERNEL);
 	if (!buf_virt) {
-		ret = -ENOMEM;
-		goto err_out;
+		return -ENOMEM;
 	}
 
+	spin_lock_irqsave(&sdma->channel_0_lock, flags);
+
 	bd0->mode.command = C0_SETPM;
 	bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD;
 	bd0->mode.count = size / 2;
@@ -445,12 +453,11 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
 
 	memcpy(buf_virt, buf, size);
 
-	ret = sdma_run_channel(&sdma->channel[0]);
+	ret = sdma_run_channel0(sdma);
 
-	dma_free_coherent(NULL, size, buf_virt, buf_phys);
+	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
-err_out:
-	mutex_unlock(&sdma->channel_0_lock);
+	dma_free_coherent(NULL, size, buf_virt, buf_phys);
 
 	return ret;
 }
@@ -539,10 +546,6 @@ static void mxc_sdma_handle_channel(struct sdma_channel *sdmac)
 {
 	complete(&sdmac->done);
 
-	/* not interested in channel 0 interrupts */
-	if (sdmac->channel == 0)
-		return;
-
 	if (sdmac->flags & IMX_DMA_SG_LOOP)
 		sdma_handle_channel_loop(sdmac);
 	else
@@ -555,6 +558,8 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id)
 	unsigned long stat;
 
 	stat = readl_relaxed(sdma->regs + SDMA_H_INTR);
+	/* not interested in channel 0 interrupts */
+	stat &= ~1;
 	writel_relaxed(stat, sdma->regs + SDMA_H_INTR);
 
 	while (stat) {
@@ -660,6 +665,7 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	struct sdma_context_data *context = sdma->context;
 	struct sdma_buffer_descriptor *bd0 = sdma->channel[0].bd;
 	int ret;
+	unsigned long flags;
 
 	if (sdmac->direction == DMA_DEV_TO_MEM) {
 		load_address = sdmac->pc_from_device;
@@ -677,7 +683,7 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", (u32)sdmac->event_mask[0]);
 	dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", (u32)sdmac->event_mask[1]);
 
-	mutex_lock(&sdma->channel_0_lock);
+	spin_lock_irqsave(&sdma->channel_0_lock, flags);
 
 	memset(context, 0, sizeof(*context));
 	context->channel_state.pc = load_address;
@@ -696,10 +702,9 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	bd0->mode.count = sizeof(*context) / 4;
 	bd0->buffer_addr = sdma->context_phys;
 	bd0->ext_buffer_addr = 2048 + (sizeof(*context) / 4) * channel;
+	ret = sdma_run_channel0(sdma);
 
-	ret = sdma_run_channel(&sdma->channel[0]);
-
-	mutex_unlock(&sdma->channel_0_lock);
+	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
 	return ret;
 }
@@ -1305,7 +1310,7 @@ static int __init sdma_probe(struct platform_device *pdev)
 	if (!sdma)
 		return -ENOMEM;
 
-	mutex_init(&sdma->channel_0_lock);
+	spin_lock_init(&sdma->channel_0_lock);
 
 	sdma->dev = &pdev->dev;
 
-- 
1.7.5.4

[PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic

[Richard Zhao]

device_prep_dma_cyclic may be call in audio trigger function which is
atomic context, so we make it atomic too.

 - change channel0 lock to spinlock.
 - Use polling to wait for channel0 finish running.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
 drivers/dma/imx-sdma.c |   57 ++++++++++++++++++++++++++---------------------
 1 files changed, 31 insertions(+), 26 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index fddccae..4fd48eb 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -24,7 +24,7 @@
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
-#include <linux/wait.h>
+#include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/semaphore.h>
 #include <linux/spinlock.h>
@@ -324,7 +324,7 @@ struct sdma_engine {
 	struct dma_device		dma_device;
 	struct clk			*clk_ipg;
 	struct clk			*clk_ahb;
-	struct mutex			channel_0_lock;
+	spinlock_t		channel_0_lock;
 	struct sdma_script_start_addrs	*script_addrs;
 };
 
@@ -402,19 +402,27 @@ static void sdma_enable_channel(struct sdma_engine *sdma, int channel)
 }
 
 /*
- * sdma_run_channel - run a channel and wait till it's done
+ * sdma_run_channel0 - run a channel and wait till it's done
  */
-static int sdma_run_channel(struct sdma_channel *sdmac)
+static int sdma_run_channel0(struct sdma_engine *sdma)
 {
-	struct sdma_engine *sdma = sdmac->sdma;
-	int channel = sdmac->channel;
 	int ret;
+	unsigned long timeout = 500;
 
-	init_completion(&sdmac->done);
+	sdma_enable_channel(sdma, 0);
 
-	sdma_enable_channel(sdma, channel);
+	while (!(ret = readl_relaxed(sdma->regs + SDMA_H_INTR) & 1)) {
+		if (timeout-- <= 0)
+			break;
+		udelay(1);
+	}
 
-	ret = wait_for_completion_timeout(&sdmac->done, HZ);
+	if (ret) {
+		/* Clear the interrupt status */
+		writel_relaxed(ret, sdma->regs + SDMA_H_INTR);
+	} else {
+		dev_err(sdma->dev, "Timeout waiting for CH0 ready\n");
+	}
 
 	return ret ? 0 : -ETIMEDOUT;
 }
@@ -426,17 +434,17 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
 	void *buf_virt;
 	dma_addr_t buf_phys;
 	int ret;
-
-	mutex_lock(&sdma->channel_0_lock);
+	unsigned long flags;
 
 	buf_virt = dma_alloc_coherent(NULL,
 			size,
 			&buf_phys, GFP_KERNEL);
 	if (!buf_virt) {
-		ret = -ENOMEM;
-		goto err_out;
+		return -ENOMEM;
 	}
 
+	spin_lock_irqsave(&sdma->channel_0_lock, flags);
+
 	bd0->mode.command = C0_SETPM;
 	bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD;
 	bd0->mode.count = size / 2;
@@ -445,12 +453,11 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
 
 	memcpy(buf_virt, buf, size);
 
-	ret = sdma_run_channel(&sdma->channel[0]);
+	ret = sdma_run_channel0(sdma);
 
-	dma_free_coherent(NULL, size, buf_virt, buf_phys);
+	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
-err_out:
-	mutex_unlock(&sdma->channel_0_lock);
+	dma_free_coherent(NULL, size, buf_virt, buf_phys);
 
 	return ret;
 }
@@ -539,10 +546,6 @@ static void mxc_sdma_handle_channel(struct sdma_channel *sdmac)
 {
 	complete(&sdmac->done);
 
-	/* not interested in channel 0 interrupts */
-	if (sdmac->channel == 0)
-		return;
-
 	if (sdmac->flags & IMX_DMA_SG_LOOP)
 		sdma_handle_channel_loop(sdmac);
 	else
@@ -555,6 +558,8 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id)
 	unsigned long stat;
 
 	stat = readl_relaxed(sdma->regs + SDMA_H_INTR);
+	/* not interested in channel 0 interrupts */
+	stat &= ~1;
 	writel_relaxed(stat, sdma->regs + SDMA_H_INTR);
 
 	while (stat) {
@@ -660,6 +665,7 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	struct sdma_context_data *context = sdma->context;
 	struct sdma_buffer_descriptor *bd0 = sdma->channel[0].bd;
 	int ret;
+	unsigned long flags;
 
 	if (sdmac->direction == DMA_DEV_TO_MEM) {
 		load_address = sdmac->pc_from_device;
@@ -677,7 +683,7 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", (u32)sdmac->event_mask[0]);
 	dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", (u32)sdmac->event_mask[1]);
 
-	mutex_lock(&sdma->channel_0_lock);
+	spin_lock_irqsave(&sdma->channel_0_lock, flags);
 
 	memset(context, 0, sizeof(*context));
 	context->channel_state.pc = load_address;
@@ -696,10 +702,9 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	bd0->mode.count = sizeof(*context) / 4;
 	bd0->buffer_addr = sdma->context_phys;
 	bd0->ext_buffer_addr = 2048 + (sizeof(*context) / 4) * channel;
+	ret = sdma_run_channel0(sdma);
 
-	ret = sdma_run_channel(&sdma->channel[0]);
-
-	mutex_unlock(&sdma->channel_0_lock);
+	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
 	return ret;
 }
@@ -1305,7 +1310,7 @@ static int __init sdma_probe(struct platform_device *pdev)
 	if (!sdma)
 		return -ENOMEM;
 
-	mutex_init(&sdma->channel_0_lock);
+	spin_lock_init(&sdma->channel_0_lock);
 
 	sdma->dev = &pdev->dev;
 
-- 
1.7.5.4

[PATCH V2 02/11] ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |    2 ++
 arch/arm/boot/dts/imx6q.dtsi          |    7 +++++++
 2 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 2f631f2..85b7c6c 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -76,6 +76,8 @@
 			i2c@021a0000 { /* I2C1 */
 				status = "okay";
 				clock-frequency = <100000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_1>;
 
 				codec: sgtl5000@0a {
 					compatible = "fsl,sgtl5000";
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 949f979..f95aa3c 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -486,6 +486,13 @@
 				reg = <0x020e0000 0x4000>;
 
 				/* shared pinctrl settings */
+				i2c1 {
+					pinctrl_i2c1_1: i2c1grp-1 {
+						fsl,pins = <137 0x4001b8b1	/* MX6Q_PAD_EIM_D21__I2C1_SCL */
+							    196 0x4001b8b1>;	/* MX6Q_PAD_EIM_D28__I2C1_SDA */
+					};
+				};
+
 				usdhc3 {
 					pinctrl_usdhc3_1: usdhc3grp-1 {
 						fsl,pins = <1273 0x17059	/* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
-- 
1.7.5.4

[PATCH V2 02/11] ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |    2 ++
 arch/arm/boot/dts/imx6q.dtsi          |    7 +++++++
 2 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 2f631f2..85b7c6c 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -76,6 +76,8 @@
 			i2c at 021a0000 { /* I2C1 */
 				status = "okay";
 				clock-frequency = <100000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_1>;
 
 				codec: sgtl5000 at 0a {
 					compatible = "fsl,sgtl5000";
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 949f979..f95aa3c 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -486,6 +486,13 @@
 				reg = <0x020e0000 0x4000>;
 
 				/* shared pinctrl settings */
+				i2c1 {
+					pinctrl_i2c1_1: i2c1grp-1 {
+						fsl,pins = <137 0x4001b8b1	/* MX6Q_PAD_EIM_D21__I2C1_SCL */
+							    196 0x4001b8b1>;	/* MX6Q_PAD_EIM_D28__I2C1_SDA */
+					};
+				};
+
 				usdhc3 {
 					pinctrl_usdhc3_1: usdhc3grp-1 {
 						fsl,pins = <1273 0x17059	/* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
-- 
1.7.5.4

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 sound/soc/fsl/imx-audmux.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/sound/soc/fsl/imx-audmux.c b/sound/soc/fsl/imx-audmux.c
index f237003..0803274 100644
--- a/sound/soc/fsl/imx-audmux.c
+++ b/sound/soc/fsl/imx-audmux.c
@@ -26,6 +26,7 @@
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/pinctrl/consumer.h>
 
 #include "imx-audmux.h"
 
@@ -249,6 +250,7 @@ EXPORT_SYMBOL_GPL(imx_audmux_v2_configure_port);
 static int __devinit imx_audmux_probe(struct platform_device *pdev)
 {
 	struct resource *res;
+	struct pinctrl *pinctrl;
 	const struct of_device_id *of_id =
 			of_match_device(imx_audmux_dt_ids, &pdev->dev);
 
@@ -257,6 +259,12 @@ static int __devinit imx_audmux_probe(struct platform_device *pdev)
 	if (!audmux_base)
 		return -EADDRNOTAVAIL;
 
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl)) {
+		dev_err(&pdev->dev, "setup pinctrl failed!");
+		return PTR_ERR(pinctrl);
+	}
+
 	audmux_clk = clk_get(&pdev->dev, "audmux");
 	if (IS_ERR(audmux_clk)) {
 		dev_dbg(&pdev->dev, "cannot get clock: %ld\n",
-- 
1.7.5.4

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
 sound/soc/fsl/imx-audmux.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/sound/soc/fsl/imx-audmux.c b/sound/soc/fsl/imx-audmux.c
index f237003..0803274 100644
--- a/sound/soc/fsl/imx-audmux.c
+++ b/sound/soc/fsl/imx-audmux.c
@@ -26,6 +26,7 @@
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/pinctrl/consumer.h>
 
 #include "imx-audmux.h"
 
@@ -249,6 +250,7 @@ EXPORT_SYMBOL_GPL(imx_audmux_v2_configure_port);
 static int __devinit imx_audmux_probe(struct platform_device *pdev)
 {
 	struct resource *res;
+	struct pinctrl *pinctrl;
 	const struct of_device_id *of_id =
 			of_match_device(imx_audmux_dt_ids, &pdev->dev);
 
@@ -257,6 +259,12 @@ static int __devinit imx_audmux_probe(struct platform_device *pdev)
 	if (!audmux_base)
 		return -EADDRNOTAVAIL;
 
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl)) {
+		dev_err(&pdev->dev, "setup pinctrl failed!");
+		return PTR_ERR(pinctrl);
+	}
+
 	audmux_clk = clk_get(&pdev->dev, "audmux");
 	if (IS_ERR(audmux_clk)) {
 		dev_dbg(&pdev->dev, "cannot get clock: %ld\n",
-- 
1.7.5.4

[PATCH V2 04/11] ARM: dts: imx6q-sabrelite: add audmux pinctrl support

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |    2 ++
 arch/arm/boot/dts/imx6q.dtsi          |    9 +++++++++
 2 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 85b7c6c..5b51deb 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -67,6 +67,8 @@
 
 			audmux@021d8000 {
 				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_audmux_1>;
 			};
 
 			uart2: serial@021e8000 {
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index f95aa3c..5795b93 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -486,6 +486,15 @@
 				reg = <0x020e0000 0x4000>;
 
 				/* shared pinctrl settings */
+				audmux {
+					pinctrl_audmux_1: audmux-1 {
+						fsl,pins = <18   0x80000000	/* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
+							    1586 0x80000000	/* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
+							    11   0x80000000	/* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
+							    3    0x80000000>;	/* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+					};
+				};
+
 				i2c1 {
 					pinctrl_i2c1_1: i2c1grp-1 {
 						fsl,pins = <137 0x4001b8b1	/* MX6Q_PAD_EIM_D21__I2C1_SCL */
-- 
1.7.5.4

[PATCH V2 04/11] ARM: dts: imx6q-sabrelite: add audmux pinctrl support

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |    2 ++
 arch/arm/boot/dts/imx6q.dtsi          |    9 +++++++++
 2 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 85b7c6c..5b51deb 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -67,6 +67,8 @@
 
 			audmux at 021d8000 {
 				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_audmux_1>;
 			};
 
 			uart2: serial at 021e8000 {
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index f95aa3c..5795b93 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -486,6 +486,15 @@
 				reg = <0x020e0000 0x4000>;
 
 				/* shared pinctrl settings */
+				audmux {
+					pinctrl_audmux_1: audmux-1 {
+						fsl,pins = <18   0x80000000	/* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
+							    1586 0x80000000	/* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
+							    11   0x80000000	/* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
+							    3    0x80000000>;	/* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+					};
+				};
+
 				i2c1 {
 					pinctrl_i2c1_1: i2c1grp-1 {
 						fsl,pins = <137 0x4001b8b1	/* MX6Q_PAD_EIM_D21__I2C1_SCL */
-- 
1.7.5.4

[PATCH V2 05/11] ARM: imx6q: add ssi1_ipg clk_lookup

[Richard Zhao]

It's used by audio drivers.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/mach-imx/clk-imx6q.c |   10 ++++++----
 1 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index f40a35d..92550c5 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -155,7 +155,8 @@ enum mx6q_clks {
 	gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
 	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
-	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, clk_max
+	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
+	ssi2_ipg, ssi3_ipg, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -367,9 +368,9 @@ int __init mx6q_clocks_init(void)
 	clk[sata]         = imx_clk_gate2("sata",          "ipg",               base + 0x7c, 4);
 	clk[sdma]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
 	clk[spba]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
-	clk[ssi1]         = imx_clk_gate2("ssi1",          "ssi1_podf",         base + 0x7c, 18);
-	clk[ssi2]         = imx_clk_gate2("ssi2",          "ssi2_podf",         base + 0x7c, 20);
-	clk[ssi3]         = imx_clk_gate2("ssi3",          "ssi3_podf",         base + 0x7c, 22);
+	clk[ssi1_ipg]     = imx_clk_gate2("ssi1_ipg",      "ipg",               base + 0x7c, 18);
+	clk[ssi2_ipg]     = imx_clk_gate2("ssi2_ipg",      "ipg",               base + 0x7c, 20);
+	clk[ssi3_ipg]     = imx_clk_gate2("ssi3_ipg",      "ipg",               base + 0x7c, 22);
 	clk[uart_ipg]     = imx_clk_gate2("uart_ipg",      "ipg",               base + 0x7c, 24);
 	clk[uart_serial]  = imx_clk_gate2("uart_serial",   "uart_serial_podf",  base + 0x7c, 26);
 	clk[usboh3]       = imx_clk_gate2("usboh3",        "ipg",               base + 0x80, 0);
@@ -418,6 +419,7 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[sdma], NULL, "20ec000.sdma");
 	clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog");
 	clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog");
+	clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi");
 
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
 		c = clk_get_sys(clks_init_on[i], NULL);
-- 
1.7.5.4

[PATCH V2 05/11] ARM: imx6q: add ssi1_ipg clk_lookup

[Richard Zhao]

It's used by audio drivers.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
 arch/arm/mach-imx/clk-imx6q.c |   10 ++++++----
 1 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index f40a35d..92550c5 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -155,7 +155,8 @@ enum mx6q_clks {
 	gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
 	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
-	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, clk_max
+	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
+	ssi2_ipg, ssi3_ipg, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -367,9 +368,9 @@ int __init mx6q_clocks_init(void)
 	clk[sata]         = imx_clk_gate2("sata",          "ipg",               base + 0x7c, 4);
 	clk[sdma]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
 	clk[spba]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
-	clk[ssi1]         = imx_clk_gate2("ssi1",          "ssi1_podf",         base + 0x7c, 18);
-	clk[ssi2]         = imx_clk_gate2("ssi2",          "ssi2_podf",         base + 0x7c, 20);
-	clk[ssi3]         = imx_clk_gate2("ssi3",          "ssi3_podf",         base + 0x7c, 22);
+	clk[ssi1_ipg]     = imx_clk_gate2("ssi1_ipg",      "ipg",               base + 0x7c, 18);
+	clk[ssi2_ipg]     = imx_clk_gate2("ssi2_ipg",      "ipg",               base + 0x7c, 20);
+	clk[ssi3_ipg]     = imx_clk_gate2("ssi3_ipg",      "ipg",               base + 0x7c, 22);
 	clk[uart_ipg]     = imx_clk_gate2("uart_ipg",      "ipg",               base + 0x7c, 24);
 	clk[uart_serial]  = imx_clk_gate2("uart_serial",   "uart_serial_podf",  base + 0x7c, 26);
 	clk[usboh3]       = imx_clk_gate2("usboh3",        "ipg",               base + 0x80, 0);
@@ -418,6 +419,7 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[sdma], NULL, "20ec000.sdma");
 	clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog");
 	clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog");
+	clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi");
 
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
 		c = clk_get_sys(clks_init_on[i], NULL);
-- 
1.7.5.4

[PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 sound/soc/fsl/fsl_ssi.c |    7 ++-----
 1 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 4ed2afd..b10a427 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -725,7 +725,7 @@ static int __devinit fsl_ssi_probe(struct platform_device *pdev)
 		u32 dma_events[2];
 		ssi_private->ssi_on_imx = true;
 
-		ssi_private->clk = clk_get(&pdev->dev, NULL);
+		ssi_private->clk = devm_clk_get(&pdev->dev, NULL);
 		if (IS_ERR(ssi_private->clk)) {
 			ret = PTR_ERR(ssi_private->clk);
 			dev_err(&pdev->dev, "could not get clock: %d\n", ret);
@@ -842,10 +842,8 @@ error_dev:
 	device_remove_file(&pdev->dev, dev_attr);
 
 error_clk:
-	if (ssi_private->ssi_on_imx) {
+	if (ssi_private->ssi_on_imx)
 		clk_disable_unprepare(ssi_private->clk);
-		clk_put(ssi_private->clk);
-	}
 
 error_irq:
 	free_irq(ssi_private->irq, ssi_private);
@@ -871,7 +869,6 @@ static int fsl_ssi_remove(struct platform_device *pdev)
 	if (ssi_private->ssi_on_imx) {
 		platform_device_unregister(ssi_private->imx_pcm_pdev);
 		clk_disable_unprepare(ssi_private->clk);
-		clk_put(ssi_private->clk);
 	}
 	snd_soc_unregister_dai(&pdev->dev);
 	device_remove_file(&pdev->dev, &ssi_private->dev_attr);
-- 
1.7.5.4

[PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
 sound/soc/fsl/fsl_ssi.c |    7 ++-----
 1 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 4ed2afd..b10a427 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -725,7 +725,7 @@ static int __devinit fsl_ssi_probe(struct platform_device *pdev)
 		u32 dma_events[2];
 		ssi_private->ssi_on_imx = true;
 
-		ssi_private->clk = clk_get(&pdev->dev, NULL);
+		ssi_private->clk = devm_clk_get(&pdev->dev, NULL);
 		if (IS_ERR(ssi_private->clk)) {
 			ret = PTR_ERR(ssi_private->clk);
 			dev_err(&pdev->dev, "could not get clock: %d\n", ret);
@@ -842,10 +842,8 @@ error_dev:
 	device_remove_file(&pdev->dev, dev_attr);
 
 error_clk:
-	if (ssi_private->ssi_on_imx) {
+	if (ssi_private->ssi_on_imx)
 		clk_disable_unprepare(ssi_private->clk);
-		clk_put(ssi_private->clk);
-	}
 
 error_irq:
 	free_irq(ssi_private->irq, ssi_private);
@@ -871,7 +869,6 @@ static int fsl_ssi_remove(struct platform_device *pdev)
 	if (ssi_private->ssi_on_imx) {
 		platform_device_unregister(ssi_private->imx_pcm_pdev);
 		clk_disable_unprepare(ssi_private->clk);
-		clk_put(ssi_private->clk);
 	}
 	snd_soc_unregister_dai(&pdev->dev);
 	device_remove_file(&pdev->dev, &ssi_private->dev_attr);
-- 
1.7.5.4

[PATCH V2 07/11] ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/mach-imx/clk-imx6q.c  |    3 +++
 arch/arm/mach-imx/mach-imx6q.c |   28 ++++++++++++++++++++++++++++
 2 files changed, 31 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 92550c5..096fcfb 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -420,6 +420,9 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog");
 	clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog");
 	clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi");
+	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
+	clk_register_clkdev(clk[ahb], "ahb", NULL);
+	clk_register_clkdev(clk[cko1], "cko1", NULL);
 
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
 		c = clk_get_sys(clks_init_on[i], NULL);
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 74e44d3..494c365 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -10,6 +10,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <linux/clk.h>
+#include <linux/clkdev.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -76,10 +78,36 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 	return 0;
 }
 
+static void __init imx6q_sabrelite_cko1_setup(void)
+{
+	struct clk *cko1_sel, *ahb, *cko1;
+	unsigned long rate;
+
+	cko1_sel = clk_get_sys(NULL, "cko1_sel");
+	ahb = clk_get_sys(NULL, "ahb");
+	cko1 = clk_get_sys(NULL, "cko1");
+	if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) {
+		pr_err("cko1 setup failed!\n");
+		goto put_clk;
+	}
+	clk_set_parent(cko1_sel, ahb);
+	rate = clk_round_rate(cko1, 16000000);
+	clk_set_rate(cko1, rate);
+	clk_register_clkdev(cko1, NULL, "0-000a");
+put_clk:
+	if (!IS_ERR(cko1_sel))
+		clk_put(cko1_sel);
+	if (!IS_ERR(ahb))
+		clk_put(ahb);
+	if (!IS_ERR(cko1))
+		clk_put(cko1);
+}
+
 static void __init imx6q_sabrelite_init(void)
 {
 	phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
 				ksz9021rn_phy_fixup);
+	imx6q_sabrelite_cko1_setup();
 }
 
 static void __init imx6q_init_machine(void)
-- 
1.7.5.4

[PATCH V2 07/11] ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
 arch/arm/mach-imx/clk-imx6q.c  |    3 +++
 arch/arm/mach-imx/mach-imx6q.c |   28 ++++++++++++++++++++++++++++
 2 files changed, 31 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 92550c5..096fcfb 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -420,6 +420,9 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog");
 	clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog");
 	clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi");
+	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
+	clk_register_clkdev(clk[ahb], "ahb", NULL);
+	clk_register_clkdev(clk[cko1], "cko1", NULL);
 
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
 		c = clk_get_sys(clks_init_on[i], NULL);
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 74e44d3..494c365 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -10,6 +10,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <linux/clk.h>
+#include <linux/clkdev.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -76,10 +78,36 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 	return 0;
 }
 
+static void __init imx6q_sabrelite_cko1_setup(void)
+{
+	struct clk *cko1_sel, *ahb, *cko1;
+	unsigned long rate;
+
+	cko1_sel = clk_get_sys(NULL, "cko1_sel");
+	ahb = clk_get_sys(NULL, "ahb");
+	cko1 = clk_get_sys(NULL, "cko1");
+	if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) {
+		pr_err("cko1 setup failed!\n");
+		goto put_clk;
+	}
+	clk_set_parent(cko1_sel, ahb);
+	rate = clk_round_rate(cko1, 16000000);
+	clk_set_rate(cko1, rate);
+	clk_register_clkdev(cko1, NULL, "0-000a");
+put_clk:
+	if (!IS_ERR(cko1_sel))
+		clk_put(cko1_sel);
+	if (!IS_ERR(ahb))
+		clk_put(ahb);
+	if (!IS_ERR(cko1))
+		clk_put(cko1);
+}
+
 static void __init imx6q_sabrelite_init(void)
 {
 	phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
 				ksz9021rn_phy_fixup);
+	imx6q_sabrelite_cko1_setup();
 }
 
 static void __init imx6q_init_machine(void)
-- 
1.7.5.4

[PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 5b51deb..5a35bfd 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -110,4 +110,18 @@
 			regulator-always-on;
 		};
 	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
 };
-- 
1.7.5.4

[PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 5b51deb..5a35bfd 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -110,4 +110,18 @@
 			regulator-always-on;
 		};
 	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
 };
-- 
1.7.5.4

[PATCH V2 09/11] ARM: dts: imx6q-sabrelite: add serial2 pinctrl support

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |    2 ++
 arch/arm/boot/dts/imx6q.dtsi          |    7 +++++++
 2 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 5a35bfd..e0ec929 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -73,6 +73,8 @@
 
 			uart2: serial@021e8000 {
 				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_serial2_1>;
 			};
 
 			i2c@021a0000 { /* I2C1 */
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 5795b93..31c3d5f 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -502,6 +502,13 @@
 					};
 				};
 
+				serial2 {
+					pinctrl_serial2_1: serial2grp-1 {
+						fsl,pins = <183 0x1b0b1		/* MX6Q_PAD_EIM_D26__UART2_TXD */
+							    191 0x1b0b1>;	/* MX6Q_PAD_EIM_D27__UART2_RXD */
+					};
+				};
+
 				usdhc3 {
 					pinctrl_usdhc3_1: usdhc3grp-1 {
 						fsl,pins = <1273 0x17059	/* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
-- 
1.7.5.4

[PATCH V2 09/11] ARM: dts: imx6q-sabrelite: add serial2 pinctrl support

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |    2 ++
 arch/arm/boot/dts/imx6q.dtsi          |    7 +++++++
 2 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 5a35bfd..e0ec929 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -73,6 +73,8 @@
 
 			uart2: serial at 021e8000 {
 				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_serial2_1>;
 			};
 
 			i2c at 021a0000 { /* I2C1 */
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 5795b93..31c3d5f 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -502,6 +502,13 @@
 					};
 				};
 
+				serial2 {
+					pinctrl_serial2_1: serial2grp-1 {
+						fsl,pins = <183 0x1b0b1		/* MX6Q_PAD_EIM_D26__UART2_TXD */
+							    191 0x1b0b1>;	/* MX6Q_PAD_EIM_D27__UART2_RXD */
+					};
+				};
+
 				usdhc3 {
 					pinctrl_usdhc3_1: usdhc3grp-1 {
 						fsl,pins = <1273 0x17059	/* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
-- 
1.7.5.4

[PATCH V2 10/11] ARM: imx6q: change clkdev device name from xxxx.uart to xxxx.serial

[Richard Zhao]

It's because the dts changed the node name.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/mach-imx/clk-imx6q.c |   20 ++++++++++----------
 1 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 096fcfb..4ac1282 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -393,16 +393,16 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
 	clk_register_clkdev(clk[twd], NULL, "smp_twd");
 	clk_register_clkdev(clk[usboh3], NULL, "usboh3");
-	clk_register_clkdev(clk[uart_serial], "per", "2020000.uart");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.uart");
-	clk_register_clkdev(clk[uart_serial], "per", "21e8000.uart");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.uart");
-	clk_register_clkdev(clk[uart_serial], "per", "21ec000.uart");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.uart");
-	clk_register_clkdev(clk[uart_serial], "per", "21f0000.uart");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.uart");
-	clk_register_clkdev(clk[uart_serial], "per", "21f4000.uart");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.uart");
+	clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
+	clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
+	clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");
+	clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial");
+	clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial");
+	clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial");
+	clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial");
+	clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial");
+	clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial");
+	clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial");
 	clk_register_clkdev(clk[enet], NULL, "2188000.enet");
 	clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc");
 	clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc");
-- 
1.7.5.4

[PATCH V2 10/11] ARM: imx6q: change clkdev device name from xxxx.uart to xxxx.serial

[Richard Zhao]

It's because the dts changed the node name.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
 arch/arm/mach-imx/clk-imx6q.c |   20 ++++++++++----------
 1 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 096fcfb..4ac1282 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -393,16 +393,16 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
 	clk_register_clkdev(clk[twd], NULL, "smp_twd");
 	clk_register_clkdev(clk[usboh3], NULL, "usboh3");
-	clk_register_clkdev(clk[uart_serial], "per", "2020000.uart");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.uart");
-	clk_register_clkdev(clk[uart_serial], "per", "21e8000.uart");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.uart");
-	clk_register_clkdev(clk[uart_serial], "per", "21ec000.uart");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.uart");
-	clk_register_clkdev(clk[uart_serial], "per", "21f0000.uart");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.uart");
-	clk_register_clkdev(clk[uart_serial], "per", "21f4000.uart");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.uart");
+	clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
+	clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
+	clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");
+	clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial");
+	clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial");
+	clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial");
+	clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial");
+	clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial");
+	clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial");
+	clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial");
 	clk_register_clkdev(clk[enet], NULL, "2188000.enet");
 	clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc");
 	clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc");
-- 
1.7.5.4

[PATCH V2 11/11] ARM: imx6q: change clkdev device name from xxxx.enet to xxxx.ethernet

[Richard Zhao]

It's because the dts changed the node name.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/mach-imx/clk-imx6q.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 4ac1282..cab02d0 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -403,7 +403,7 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial");
 	clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial");
 	clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial");
-	clk_register_clkdev(clk[enet], NULL, "2188000.enet");
+	clk_register_clkdev(clk[enet], NULL, "2188000.ethernet");
 	clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc");
 	clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc");
 	clk_register_clkdev(clk[usdhc3], NULL, "2198000.usdhc");
-- 
1.7.5.4

[PATCH V2 11/11] ARM: imx6q: change clkdev device name from xxxx.enet to xxxx.ethernet

[Richard Zhao]

It's because the dts changed the node name.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
 arch/arm/mach-imx/clk-imx6q.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 4ac1282..cab02d0 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -403,7 +403,7 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial");
 	clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial");
 	clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial");
-	clk_register_clkdev(clk[enet], NULL, "2188000.enet");
+	clk_register_clkdev(clk[enet], NULL, "2188000.ethernet");
 	clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc");
 	clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc");
 	clk_register_clkdev(clk[usdhc3], NULL, "2198000.usdhc");
-- 
1.7.5.4

Re: [PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 270 bytes --]

On Wed, May 09, 2012 at 07:33:05PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>

I'll apply this when devm_clk_get() makes it into mainline (hopefully in
the merge window); please remind me if I forget.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get

[Mark Brown]

On Wed, May 09, 2012 at 07:33:05PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>

I'll apply this when devm_clk_get() makes it into mainline (hopefully in
the merge window); please remind me if I forget.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120509/ba653b6b/attachment-0001.sig>

Re: [PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get

[Shawn Guo]

On 9 May 2012 19:50, Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> wrote:
> On Wed, May 09, 2012 at 07:33:05PM +0800, Richard Zhao wrote:
>> Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
>
> I'll apply this when devm_clk_get() makes it into mainline (hopefully in
> the merge window); please remind me if I forget.

We will have rmk's clkdev branch appear on arm-soc as dependency
anyway.  Can we have this series go over arm-soc tree, since we will
have all the dependencies on clk and pinctrl meet and conflicts solved
there?

Regards,
Shawn

[PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get

[Shawn Guo]

On 9 May 2012 19:50, Mark Brown <broonie@opensource.wolfsonmicro.com> wrote:
> On Wed, May 09, 2012 at 07:33:05PM +0800, Richard Zhao wrote:
>> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
>
> I'll apply this when devm_clk_get() makes it into mainline (hopefully in
> the merge window); please remind me if I forget.

We will have rmk's clkdev branch appear on arm-soc as dependency
anyway.  Can we have this series go over arm-soc tree, since we will
have all the dependencies on clk and pinctrl meet and conflicts solved
there?

Regards,
Shawn

Re: [PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 684 bytes --]

On Wed, May 09, 2012 at 07:59:20PM +0800, Shawn Guo wrote:
> On 9 May 2012 19:50, Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> wrote:

> > I'll apply this when devm_clk_get() makes it into mainline (hopefully in
> > the merge window); please remind me if I forget.

> We will have rmk's clkdev branch appear on arm-soc as dependency
> anyway.  Can we have this series go over arm-soc tree, since we will
> have all the dependencies on clk and pinctrl meet and conflicts solved
> there?

This change is totally unrelated to the rest of the series, it's just a
random cleanup to the driver - it really shouldn't have been part of the
series at all.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get

[Mark Brown]

On Wed, May 09, 2012 at 07:59:20PM +0800, Shawn Guo wrote:
> On 9 May 2012 19:50, Mark Brown <broonie@opensource.wolfsonmicro.com> wrote:

> > I'll apply this when devm_clk_get() makes it into mainline (hopefully in
> > the merge window); please remind me if I forget.

> We will have rmk's clkdev branch appear on arm-soc as dependency
> anyway.  Can we have this series go over arm-soc tree, since we will
> have all the dependencies on clk and pinctrl meet and conflicts solved
> there?

This change is totally unrelated to the rest of the series, it's just a
random cleanup to the driver - it really shouldn't have been part of the
series at all.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120509/e57d1db2/attachment-0001.sig>

Re: [PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get

[Shawn Guo]

On 9 May 2012 19:59, Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> On 9 May 2012 19:50, Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> wrote:
>> On Wed, May 09, 2012 at 07:33:05PM +0800, Richard Zhao wrote:
>>> Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
>>
>> I'll apply this when devm_clk_get() makes it into mainline (hopefully in
>> the merge window); please remind me if I forget.
>
> We will have rmk's clkdev branch appear on arm-soc as dependency
> anyway.  Can we have this series go over arm-soc tree, since we will
> have all the dependencies on clk and pinctrl meet and conflicts solved
> there?
>
Ah, I just realized that the prerequisite patches on fsl_ssi.c have
already applied on sound tree, so yes, we have to wait for the next
merge window then.

Regards,
Shawn

[PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get

[Shawn Guo]

On 9 May 2012 19:59, Shawn Guo <shawn.guo@linaro.org> wrote:
> On 9 May 2012 19:50, Mark Brown <broonie@opensource.wolfsonmicro.com> wrote:
>> On Wed, May 09, 2012 at 07:33:05PM +0800, Richard Zhao wrote:
>>> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
>>
>> I'll apply this when devm_clk_get() makes it into mainline (hopefully in
>> the merge window); please remind me if I forget.
>
> We will have rmk's clkdev branch appear on arm-soc as dependency
> anyway. ?Can we have this series go over arm-soc tree, since we will
> have all the dependencies on clk and pinctrl meet and conflicts solved
> there?
>
Ah, I just realized that the prerequisite patches on fsl_ssi.c have
already applied on sound tree, so yes, we have to wait for the next
merge window then.

Regards,
Shawn

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 206 bytes --]

On Wed, May 09, 2012 at 07:33:02PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>

I guess this depends on some other tree and can't just be directly
applied to ASoC?

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Mark Brown]

On Wed, May 09, 2012 at 07:33:02PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>

I guess this depends on some other tree and can't just be directly
applied to ASoC?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120509/ef1e1217/attachment.sig>

Re: [PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get

[Timur Tabi]

Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---

It's a simple change that only affects i.MX, so ...

Acked-by: Timur Tabi <timur-KZfg59tc24xl57MIdRCFDg@public.gmane.org>

-- 
Timur Tabi
Linux kernel developer at Freescale

[PATCH V2 06/11] ASoC: fsl_ssi: convert to use devm_clk_get

[Timur Tabi]

Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> ---

It's a simple change that only affects i.MX, so ...

Acked-by: Timur Tabi <timur@freescale.com>

-- 
Timur Tabi
Linux kernel developer at Freescale

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Richard Zhao]

On Wed, May 09, 2012 at 05:00:06PM +0100, Mark Brown wrote:
> On Wed, May 09, 2012 at 07:33:02PM +0800, Richard Zhao wrote:
> > Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> 
> I guess this depends on some other tree and can't just be directly
> applied to ASoC?
It's based on your for-next. But for working, it depends on
pinctl/for-next.

Thanks
Richard

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Richard Zhao]

On Wed, May 09, 2012 at 05:00:06PM +0100, Mark Brown wrote:
> On Wed, May 09, 2012 at 07:33:02PM +0800, Richard Zhao wrote:
> > Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> 
> I guess this depends on some other tree and can't just be directly
> applied to ASoC?
It's based on your for-next. But for working, it depends on
pinctl/for-next.

Thanks
Richard

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Dong Aisheng]

On Wed, May 09, 2012 at 07:33:02PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
>  sound/soc/fsl/imx-audmux.c |    8 ++++++++
>  1 files changed, 8 insertions(+), 0 deletions(-)
> 
Acked-by: Dong Aisheng <dong.aisheng-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

I guess you may want it to go through arm-soc tree which already has
a patch asking pinctrl to provide dummies or it may break the drivers.

Regards
Dong Aisheng

> diff --git a/sound/soc/fsl/imx-audmux.c b/sound/soc/fsl/imx-audmux.c
> index f237003..0803274 100644
> --- a/sound/soc/fsl/imx-audmux.c
> +++ b/sound/soc/fsl/imx-audmux.c
> @@ -26,6 +26,7 @@
>  #include <linux/of_device.h>
>  #include <linux/platform_device.h>
>  #include <linux/slab.h>
> +#include <linux/pinctrl/consumer.h>
>  
>  #include "imx-audmux.h"
>  
> @@ -249,6 +250,7 @@ EXPORT_SYMBOL_GPL(imx_audmux_v2_configure_port);
>  static int __devinit imx_audmux_probe(struct platform_device *pdev)
>  {
>  	struct resource *res;
> +	struct pinctrl *pinctrl;
>  	const struct of_device_id *of_id =
>  			of_match_device(imx_audmux_dt_ids, &pdev->dev);
>  
> @@ -257,6 +259,12 @@ static int __devinit imx_audmux_probe(struct platform_device *pdev)
>  	if (!audmux_base)
>  		return -EADDRNOTAVAIL;
>  
> +	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
> +	if (IS_ERR(pinctrl)) {
> +		dev_err(&pdev->dev, "setup pinctrl failed!");
> +		return PTR_ERR(pinctrl);
> +	}
> +
>  	audmux_clk = clk_get(&pdev->dev, "audmux");
>  	if (IS_ERR(audmux_clk)) {
>  		dev_dbg(&pdev->dev, "cannot get clock: %ld\n",
> -- 
> 1.7.5.4
> 
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Dong Aisheng]

On Wed, May 09, 2012 at 07:33:02PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> ---
>  sound/soc/fsl/imx-audmux.c |    8 ++++++++
>  1 files changed, 8 insertions(+), 0 deletions(-)
> 
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>

I guess you may want it to go through arm-soc tree which already has
a patch asking pinctrl to provide dummies or it may break the drivers.

Regards
Dong Aisheng

> diff --git a/sound/soc/fsl/imx-audmux.c b/sound/soc/fsl/imx-audmux.c
> index f237003..0803274 100644
> --- a/sound/soc/fsl/imx-audmux.c
> +++ b/sound/soc/fsl/imx-audmux.c
> @@ -26,6 +26,7 @@
>  #include <linux/of_device.h>
>  #include <linux/platform_device.h>
>  #include <linux/slab.h>
> +#include <linux/pinctrl/consumer.h>
>  
>  #include "imx-audmux.h"
>  
> @@ -249,6 +250,7 @@ EXPORT_SYMBOL_GPL(imx_audmux_v2_configure_port);
>  static int __devinit imx_audmux_probe(struct platform_device *pdev)
>  {
>  	struct resource *res;
> +	struct pinctrl *pinctrl;
>  	const struct of_device_id *of_id =
>  			of_match_device(imx_audmux_dt_ids, &pdev->dev);
>  
> @@ -257,6 +259,12 @@ static int __devinit imx_audmux_probe(struct platform_device *pdev)
>  	if (!audmux_base)
>  		return -EADDRNOTAVAIL;
>  
> +	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
> +	if (IS_ERR(pinctrl)) {
> +		dev_err(&pdev->dev, "setup pinctrl failed!");
> +		return PTR_ERR(pinctrl);
> +	}
> +
>  	audmux_clk = clk_get(&pdev->dev, "audmux");
>  	if (IS_ERR(audmux_clk)) {
>  		dev_dbg(&pdev->dev, "cannot get clock: %ld\n",
> -- 
> 1.7.5.4
> 
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

Re: [PATCH V2 04/11] ARM: dts: imx6q-sabrelite: add audmux pinctrl support

[Dong Aisheng]

On Wed, May 09, 2012 at 07:33:03PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> ---
>  arch/arm/boot/dts/imx6q-sabrelite.dts |    2 ++
>  arch/arm/boot/dts/imx6q.dtsi          |    9 +++++++++
>  2 files changed, 11 insertions(+), 0 deletions(-)
> 
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>

Regards
Dong Aisheng

[PATCH V2 04/11] ARM: dts: imx6q-sabrelite: add audmux pinctrl support

[Dong Aisheng]

On Wed, May 09, 2012 at 07:33:03PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> ---
>  arch/arm/boot/dts/imx6q-sabrelite.dts |    2 ++
>  arch/arm/boot/dts/imx6q.dtsi          |    9 +++++++++
>  2 files changed, 11 insertions(+), 0 deletions(-)
> 
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>

Regards
Dong Aisheng

Re: [PATCH V2 09/11] ARM: dts: imx6q-sabrelite: add serial2 pinctrl support

[Dong Aisheng]

On Wed, May 09, 2012 at 07:33:08PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
>  arch/arm/boot/dts/imx6q-sabrelite.dts |    2 ++
>  arch/arm/boot/dts/imx6q.dtsi          |    7 +++++++
>  2 files changed, 9 insertions(+), 0 deletions(-)
> 
Acked-by: Dong Aisheng <dong.aisheng-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Regards
Dong Aisheng

[PATCH V2 09/11] ARM: dts: imx6q-sabrelite: add serial2 pinctrl support

[Dong Aisheng]

On Wed, May 09, 2012 at 07:33:08PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> ---
>  arch/arm/boot/dts/imx6q-sabrelite.dts |    2 ++
>  arch/arm/boot/dts/imx6q.dtsi          |    7 +++++++
>  2 files changed, 9 insertions(+), 0 deletions(-)
> 
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>

Regards
Dong Aisheng

Re: [PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic

[Vinod Koul]

On Wed, 2012-05-09 at 19:33 +0800, Richard Zhao wrote:
> device_prep_dma_cyclic may be call in audio trigger function which is
> atomic context, so we make it atomic too.
> 
>  - change channel0 lock to spinlock.
>  - Use polling to wait for channel0 finish running.
> 
> Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Acked By: Vinod Koul <vinod.koul-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>

-- 
~Vinod

[PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic

[Vinod Koul]

On Wed, 2012-05-09 at 19:33 +0800, Richard Zhao wrote:
> device_prep_dma_cyclic may be call in audio trigger function which is
> atomic context, so we make it atomic too.
> 
>  - change channel0 lock to spinlock.
>  - Use polling to wait for channel0 finish running.
> 
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked By: Vinod Koul <vinod.koul@linux.intel.com>

-- 
~Vinod

Re: [PATCH V2 02/11] ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support

[Dong Aisheng]

On Wed, May 09, 2012 at 07:33:01PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
>  arch/arm/boot/dts/imx6q-sabrelite.dts |    2 ++
>  arch/arm/boot/dts/imx6q.dtsi          |    7 +++++++
>  2 files changed, 9 insertions(+), 0 deletions(-)
> 
Acked-by: Dong Aisheng <dong.aisheng-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Regards
Dong Aisheng

[PATCH V2 02/11] ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support

[Dong Aisheng]

On Wed, May 09, 2012 at 07:33:01PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> ---
>  arch/arm/boot/dts/imx6q-sabrelite.dts |    2 ++
>  arch/arm/boot/dts/imx6q.dtsi          |    7 +++++++
>  2 files changed, 9 insertions(+), 0 deletions(-)
> 
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>

Regards
Dong Aisheng

Re: [PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic

[Shawn Guo]

On Thu, May 10, 2012 at 09:23:58AM +0530, Vinod Koul wrote:
> On Wed, 2012-05-09 at 19:33 +0800, Richard Zhao wrote:
> > device_prep_dma_cyclic may be call in audio trigger function which is
> > atomic context, so we make it atomic too.
> > 
> >  - change channel0 lock to spinlock.
> >  - Use polling to wait for channel0 finish running.
> > 
> > Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> Acked By: Vinod Koul <vinod.koul-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> 
Applied on imx/dt branch with Vinod's ack.  Thanks.

-- 
Regards,
Shawn

[PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic

[Shawn Guo]

On Thu, May 10, 2012 at 09:23:58AM +0530, Vinod Koul wrote:
> On Wed, 2012-05-09 at 19:33 +0800, Richard Zhao wrote:
> > device_prep_dma_cyclic may be call in audio trigger function which is
> > atomic context, so we make it atomic too.
> > 
> >  - change channel0 lock to spinlock.
> >  - Use polling to wait for channel0 finish running.
> > 
> > Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> Acked By: Vinod Koul <vinod.koul@linux.intel.com>
> 
Applied on imx/dt branch with Vinod's ack.  Thanks.

-- 
Regards,
Shawn

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Shawn Guo]

On Thu, May 10, 2012 at 08:35:33AM +0800, Richard Zhao wrote:
> On Wed, May 09, 2012 at 05:00:06PM +0100, Mark Brown wrote:
> > On Wed, May 09, 2012 at 07:33:02PM +0800, Richard Zhao wrote:
> > > Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > 
> > I guess this depends on some other tree and can't just be directly
> > applied to ASoC?
> It's based on your for-next. But for working, it depends on
> pinctl/for-next.
> 
Mark, may I have your ack to have it go through arm-soc?  I will ask
Arnd pull your sound/for-v3.5 branch into arm-soc as a dependency.
You need to ensure the branch will not be rebased.

-- 
Regards,
Shawn

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Shawn Guo]

On Thu, May 10, 2012 at 08:35:33AM +0800, Richard Zhao wrote:
> On Wed, May 09, 2012 at 05:00:06PM +0100, Mark Brown wrote:
> > On Wed, May 09, 2012 at 07:33:02PM +0800, Richard Zhao wrote:
> > > Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> > 
> > I guess this depends on some other tree and can't just be directly
> > applied to ASoC?
> It's based on your for-next. But for working, it depends on
> pinctl/for-next.
> 
Mark, may I have your ack to have it go through arm-soc?  I will ask
Arnd pull your sound/for-v3.5 branch into arm-soc as a dependency.
You need to ensure the branch will not be rebased.

-- 
Regards,
Shawn

Re: [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Shawn Guo]

On Wed, May 09, 2012 at 07:33:07PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
>  arch/arm/boot/dts/imx6q-sabrelite.dts |   14 ++++++++++++++
>  1 files changed, 14 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
> index 5b51deb..5a35bfd 100644
> --- a/arch/arm/boot/dts/imx6q-sabrelite.dts
> +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
> @@ -110,4 +110,18 @@
>  			regulator-always-on;
>  		};
>  	};
> +
> +	sound {
> +		compatible = "fsl,imx6q-sabrelite-sgtl5000",
> +			     "fsl,imx-audio-sgtl5000";
> +		model = "imx6q-sabrelite-sgtl5000";
> +		ssi-controller = <&ssi1>;
> +		audio-codec = <&codec>;
> +		audio-routing =
> +			"MIC_IN", "Mic Jack",
> +			"Mic Jack", "Mic Bias",

"Mic Bias" is a SUPPLY for both "MIC_IN" and "Mic Jack", so it should
look like:

                       "Mic Jack", "Mic Bias",
                       "MIC_IN", "Mic Bias",

Regards,
Shawn

> +			"Headphone Jack", "HP_OUT";
> +		mux-int-port = <1>;
> +		mux-ext-port = <4>;
> +	};
>  };
> -- 
> 1.7.5.4
> 
> 

[PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Shawn Guo]

On Wed, May 09, 2012 at 07:33:07PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> ---
>  arch/arm/boot/dts/imx6q-sabrelite.dts |   14 ++++++++++++++
>  1 files changed, 14 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
> index 5b51deb..5a35bfd 100644
> --- a/arch/arm/boot/dts/imx6q-sabrelite.dts
> +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
> @@ -110,4 +110,18 @@
>  			regulator-always-on;
>  		};
>  	};
> +
> +	sound {
> +		compatible = "fsl,imx6q-sabrelite-sgtl5000",
> +			     "fsl,imx-audio-sgtl5000";
> +		model = "imx6q-sabrelite-sgtl5000";
> +		ssi-controller = <&ssi1>;
> +		audio-codec = <&codec>;
> +		audio-routing =
> +			"MIC_IN", "Mic Jack",
> +			"Mic Jack", "Mic Bias",

"Mic Bias" is a SUPPLY for both "MIC_IN" and "Mic Jack", so it should
look like:

                       "Mic Jack", "Mic Bias",
                       "MIC_IN", "Mic Bias",

Regards,
Shawn

> +			"Headphone Jack", "HP_OUT";
> +		mux-int-port = <1>;
> +		mux-ext-port = <4>;
> +	};
>  };
> -- 
> 1.7.5.4
> 
> 

Re: [PATCH V2 10/11] ARM: imx6q: change clkdev device name from xxxx.uart to xxxx.serial

[Shawn Guo]

On Wed, May 09, 2012 at 07:33:09PM +0800, Richard Zhao wrote:
> It's because the dts changed the node name.
> 
Dirk had sent the same patch, but I told him that I will rebase my DT
branch on top Sascha's clk, the issue will be solved by the rebasing,
so I'm not taking the last two patches.

Regards,
Shawn

> Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
>  arch/arm/mach-imx/clk-imx6q.c |   20 ++++++++++----------
>  1 files changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
> index 096fcfb..4ac1282 100644
> --- a/arch/arm/mach-imx/clk-imx6q.c
> +++ b/arch/arm/mach-imx/clk-imx6q.c
> @@ -393,16 +393,16 @@ int __init mx6q_clocks_init(void)
>  	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
>  	clk_register_clkdev(clk[twd], NULL, "smp_twd");
>  	clk_register_clkdev(clk[usboh3], NULL, "usboh3");
> -	clk_register_clkdev(clk[uart_serial], "per", "2020000.uart");
> -	clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.uart");
> -	clk_register_clkdev(clk[uart_serial], "per", "21e8000.uart");
> -	clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.uart");
> -	clk_register_clkdev(clk[uart_serial], "per", "21ec000.uart");
> -	clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.uart");
> -	clk_register_clkdev(clk[uart_serial], "per", "21f0000.uart");
> -	clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.uart");
> -	clk_register_clkdev(clk[uart_serial], "per", "21f4000.uart");
> -	clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.uart");
> +	clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
> +	clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
> +	clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");
> +	clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial");
> +	clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial");
> +	clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial");
> +	clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial");
> +	clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial");
> +	clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial");
> +	clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial");
>  	clk_register_clkdev(clk[enet], NULL, "2188000.enet");
>  	clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc");
>  	clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc");
> -- 
> 1.7.5.4
> 
> 

[PATCH V2 10/11] ARM: imx6q: change clkdev device name from xxxx.uart to xxxx.serial

[Shawn Guo]

On Wed, May 09, 2012 at 07:33:09PM +0800, Richard Zhao wrote:
> It's because the dts changed the node name.
> 
Dirk had sent the same patch, but I told him that I will rebase my DT
branch on top Sascha's clk, the issue will be solved by the rebasing,
so I'm not taking the last two patches.

Regards,
Shawn

> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> ---
>  arch/arm/mach-imx/clk-imx6q.c |   20 ++++++++++----------
>  1 files changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
> index 096fcfb..4ac1282 100644
> --- a/arch/arm/mach-imx/clk-imx6q.c
> +++ b/arch/arm/mach-imx/clk-imx6q.c
> @@ -393,16 +393,16 @@ int __init mx6q_clocks_init(void)
>  	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
>  	clk_register_clkdev(clk[twd], NULL, "smp_twd");
>  	clk_register_clkdev(clk[usboh3], NULL, "usboh3");
> -	clk_register_clkdev(clk[uart_serial], "per", "2020000.uart");
> -	clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.uart");
> -	clk_register_clkdev(clk[uart_serial], "per", "21e8000.uart");
> -	clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.uart");
> -	clk_register_clkdev(clk[uart_serial], "per", "21ec000.uart");
> -	clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.uart");
> -	clk_register_clkdev(clk[uart_serial], "per", "21f0000.uart");
> -	clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.uart");
> -	clk_register_clkdev(clk[uart_serial], "per", "21f4000.uart");
> -	clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.uart");
> +	clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
> +	clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
> +	clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");
> +	clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial");
> +	clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial");
> +	clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial");
> +	clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial");
> +	clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial");
> +	clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial");
> +	clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial");
>  	clk_register_clkdev(clk[enet], NULL, "2188000.enet");
>  	clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc");
>  	clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc");
> -- 
> 1.7.5.4
> 
> 

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 846 bytes --]

On Thu, May 10, 2012 at 02:39:06PM +0800, Shawn Guo wrote:
> On Thu, May 10, 2012 at 08:35:33AM +0800, Richard Zhao wrote:

> > It's based on your for-next. But for working, it depends on
> > pinctl/for-next.

> Mark, may I have your ack to have it go through arm-soc?  I will ask
> Arnd pull your sound/for-v3.5 branch into arm-soc as a dependency.
> You need to ensure the branch will not be rebased.

for-3.5 is the entire undifferentiated blob of ASoC stuff, it's not
really suitable for merging elsewhere.  It won't actually get rebased
but the idea of merging it into other trees doesn't seem terribly
clever, it'd make having topic branches in arm-soc a bit of a joke and
if you pull it right now you'll get problems in -next due to the the
ux500 stuff.

What does "working" mean in this context - what happens without the
pinctl changes?

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Mark Brown]

On Thu, May 10, 2012 at 02:39:06PM +0800, Shawn Guo wrote:
> On Thu, May 10, 2012 at 08:35:33AM +0800, Richard Zhao wrote:

> > It's based on your for-next. But for working, it depends on
> > pinctl/for-next.

> Mark, may I have your ack to have it go through arm-soc?  I will ask
> Arnd pull your sound/for-v3.5 branch into arm-soc as a dependency.
> You need to ensure the branch will not be rebased.

for-3.5 is the entire undifferentiated blob of ASoC stuff, it's not
really suitable for merging elsewhere.  It won't actually get rebased
but the idea of merging it into other trees doesn't seem terribly
clever, it'd make having topic branches in arm-soc a bit of a joke and
if you pull it right now you'll get problems in -next due to the the
ux500 stuff.

What does "working" mean in this context - what happens without the
pinctl changes?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120510/b22fa77a/attachment-0001.sig>

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Richard Zhao]

On Thu, May 10, 2012 at 09:44:04AM +0100, Mark Brown wrote:
> On Thu, May 10, 2012 at 02:39:06PM +0800, Shawn Guo wrote:
> > On Thu, May 10, 2012 at 08:35:33AM +0800, Richard Zhao wrote:
> 
> > > It's based on your for-next. But for working, it depends on
> > > pinctl/for-next.
> 
> > Mark, may I have your ack to have it go through arm-soc?  I will ask
> > Arnd pull your sound/for-v3.5 branch into arm-soc as a dependency.
> > You need to ensure the branch will not be rebased.
> 
> for-3.5 is the entire undifferentiated blob of ASoC stuff, it's not
> really suitable for merging elsewhere.  It won't actually get rebased
> but the idea of merging it into other trees doesn't seem terribly
> clever, it'd make having topic branches in arm-soc a bit of a joke and
> if you pull it right now you'll get problems in -next due to the the
> ux500 stuff.
> 
> What does "working" mean in this context - what happens without the
> pinctl changes?
devm_pinctrl_get_select_default function is added in below commit which
is in pinctrl/for-next.

commit 6d4ca1fb467932773da7b808c52f3d7ef4461ba0
Author: Stephen Warren <swarren@nvidia.com>
Date:   Mon Apr 16 10:51:00 2012 -0600

    pinctrl: implement devm_pinctrl_get()/put()
    
    These functions allow the driver core to automatically clean up any
    allocations made by drivers, thus leading to simplified drivers.
    
    Signed-off-by: Stephen Warren <swarren@nvidia.com>
    Signed-off-by: Linus Walleij <linus.walleij@linaro.org>


So it'll fail compile without pinctrl/for-next. I guess Linus may need
to prepare a non-rebase base for others to merge.

Thanks
Richard

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Richard Zhao]

On Thu, May 10, 2012 at 09:44:04AM +0100, Mark Brown wrote:
> On Thu, May 10, 2012 at 02:39:06PM +0800, Shawn Guo wrote:
> > On Thu, May 10, 2012 at 08:35:33AM +0800, Richard Zhao wrote:
> 
> > > It's based on your for-next. But for working, it depends on
> > > pinctl/for-next.
> 
> > Mark, may I have your ack to have it go through arm-soc?  I will ask
> > Arnd pull your sound/for-v3.5 branch into arm-soc as a dependency.
> > You need to ensure the branch will not be rebased.
> 
> for-3.5 is the entire undifferentiated blob of ASoC stuff, it's not
> really suitable for merging elsewhere.  It won't actually get rebased
> but the idea of merging it into other trees doesn't seem terribly
> clever, it'd make having topic branches in arm-soc a bit of a joke and
> if you pull it right now you'll get problems in -next due to the the
> ux500 stuff.
> 
> What does "working" mean in this context - what happens without the
> pinctl changes?
devm_pinctrl_get_select_default function is added in below commit which
is in pinctrl/for-next.

commit 6d4ca1fb467932773da7b808c52f3d7ef4461ba0
Author: Stephen Warren <swarren@nvidia.com>
Date:   Mon Apr 16 10:51:00 2012 -0600

    pinctrl: implement devm_pinctrl_get()/put()
    
    These functions allow the driver core to automatically clean up any
    allocations made by drivers, thus leading to simplified drivers.
    
    Signed-off-by: Stephen Warren <swarren@nvidia.com>
    Signed-off-by: Linus Walleij <linus.walleij@linaro.org>


So it'll fail compile without pinctrl/for-next. I guess Linus may need
to prepare a non-rebase base for others to merge.

Thanks
Richard

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Shawn Guo]

On Thu, May 10, 2012 at 09:44:04AM +0100, Mark Brown wrote:
> On Thu, May 10, 2012 at 02:39:06PM +0800, Shawn Guo wrote:
> > On Thu, May 10, 2012 at 08:35:33AM +0800, Richard Zhao wrote:
> 
> > > It's based on your for-next. But for working, it depends on
> > > pinctl/for-next.
> 
> > Mark, may I have your ack to have it go through arm-soc?  I will ask
> > Arnd pull your sound/for-v3.5 branch into arm-soc as a dependency.
> > You need to ensure the branch will not be rebased.
> 
> for-3.5 is the entire undifferentiated blob of ASoC stuff, it's not
> really suitable for merging elsewhere.  It won't actually get rebased
> but the idea of merging it into other trees doesn't seem terribly
> clever, it'd make having topic branches in arm-soc a bit of a joke and
> if you pull it right now you'll get problems in -next due to the the
> ux500 stuff.
> 
Pulling it into arm-soc as a dependency only means we will have it as
a base for other branches that depend on.  It does not change anything
about how the branch flows to Linus.  Arnd will only send those arm-soc
branches that depend on sound/for-3.5 after it gets merged by Linus.

> What does "working" mean in this context - what happens without the
> pinctl changes?

It will break all the imx-audmux users that haven't got any pinctrl
states defined for imx-audmux.  We have patches on imx (arm-soc) tree
defining pinctrl states either in DT or dummy states in board files
to make sure pinctrl API works fine for every imx-audmux users. 

-- 
Regards,
Shawn

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Shawn Guo]

On Thu, May 10, 2012 at 09:44:04AM +0100, Mark Brown wrote:
> On Thu, May 10, 2012 at 02:39:06PM +0800, Shawn Guo wrote:
> > On Thu, May 10, 2012 at 08:35:33AM +0800, Richard Zhao wrote:
> 
> > > It's based on your for-next. But for working, it depends on
> > > pinctl/for-next.
> 
> > Mark, may I have your ack to have it go through arm-soc?  I will ask
> > Arnd pull your sound/for-v3.5 branch into arm-soc as a dependency.
> > You need to ensure the branch will not be rebased.
> 
> for-3.5 is the entire undifferentiated blob of ASoC stuff, it's not
> really suitable for merging elsewhere.  It won't actually get rebased
> but the idea of merging it into other trees doesn't seem terribly
> clever, it'd make having topic branches in arm-soc a bit of a joke and
> if you pull it right now you'll get problems in -next due to the the
> ux500 stuff.
> 
Pulling it into arm-soc as a dependency only means we will have it as
a base for other branches that depend on.  It does not change anything
about how the branch flows to Linus.  Arnd will only send those arm-soc
branches that depend on sound/for-3.5 after it gets merged by Linus.

> What does "working" mean in this context - what happens without the
> pinctl changes?

It will break all the imx-audmux users that haven't got any pinctrl
states defined for imx-audmux.  We have patches on imx (arm-soc) tree
defining pinctrl states either in DT or dummy states in board files
to make sure pinctrl API works fine for every imx-audmux users. 

-- 
Regards,
Shawn

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 484 bytes --]

On Thu, May 10, 2012 at 05:07:18PM +0800, Shawn Guo wrote:

> Pulling it into arm-soc as a dependency only means we will have it as
> a base for other branches that depend on.  It does not change anything
> about how the branch flows to Linus.  Arnd will only send those arm-soc
> branches that depend on sound/for-3.5 after it gets merged by Linus.

I don't see what difference that really makes to anything...  exactly
who sends pull requests to Linus is pretty immaterial, really.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Mark Brown]

On Thu, May 10, 2012 at 05:07:18PM +0800, Shawn Guo wrote:

> Pulling it into arm-soc as a dependency only means we will have it as
> a base for other branches that depend on.  It does not change anything
> about how the branch flows to Linus.  Arnd will only send those arm-soc
> branches that depend on sound/for-3.5 after it gets merged by Linus.

I don't see what difference that really makes to anything...  exactly
who sends pull requests to Linus is pretty immaterial, really.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120510/5b8e1ee2/attachment-0001.sig>

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 473 bytes --]

On Thu, May 10, 2012 at 05:05:00PM +0800, Richard Zhao wrote:

> devm_pinctrl_get_select_default function is added in below commit which
> is in pinctrl/for-next.

Oh, dear.  That's unfortunate, I guess it's not on a branch in pinctl
which can be pulled separately (this is what I've been doing with things
like regmap and regulator - creating new interfaces on easily mergeable
branches)?  Looking at it from the other perspective, what goes wrong if
we defer this patch?

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Mark Brown]

On Thu, May 10, 2012 at 05:05:00PM +0800, Richard Zhao wrote:

> devm_pinctrl_get_select_default function is added in below commit which
> is in pinctrl/for-next.

Oh, dear.  That's unfortunate, I guess it's not on a branch in pinctl
which can be pulled separately (this is what I've been doing with things
like regmap and regulator - creating new interfaces on easily mergeable
branches)?  Looking at it from the other perspective, what goes wrong if
we defer this patch?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120510/447d2db6/attachment-0001.sig>

Re: [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Richard Zhao]

On Thu, May 10, 2012 at 02:48:19PM +0800, Shawn Guo wrote:
> On Wed, May 09, 2012 at 07:33:07PM +0800, Richard Zhao wrote:
> > Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> > ---
> >  arch/arm/boot/dts/imx6q-sabrelite.dts |   14 ++++++++++++++
> >  1 files changed, 14 insertions(+), 0 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
> > index 5b51deb..5a35bfd 100644
> > --- a/arch/arm/boot/dts/imx6q-sabrelite.dts
> > +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
> > @@ -110,4 +110,18 @@
> >  			regulator-always-on;
> >  		};
> >  	};
> > +
> > +	sound {
> > +		compatible = "fsl,imx6q-sabrelite-sgtl5000",
> > +			     "fsl,imx-audio-sgtl5000";
> > +		model = "imx6q-sabrelite-sgtl5000";
> > +		ssi-controller = <&ssi1>;
> > +		audio-codec = <&codec>;
> > +		audio-routing =
> > +			"MIC_IN", "Mic Jack",
> > +			"Mic Jack", "Mic Bias",
> 
> "Mic Bias" is a SUPPLY for both "MIC_IN" and "Mic Jack", so it should
> look like:
> 
>                        "Mic Jack", "Mic Bias",
>                        "MIC_IN", "Mic Bias",
Not really. The circuit:
MIC_IN <-- capacitor <--> Mic Jack
                      /
            Mic Bias /

DC can not pass the capacitor. So Mic Bias only supply Jack.

Thanks
Richard

> 
> Regards,
> Shawn
> 
> > +			"Headphone Jack", "HP_OUT";
> > +		mux-int-port = <1>;
> > +		mux-ext-port = <4>;
> > +	};
> >  };
> > -- 
> > 1.7.5.4
> > 
> > 
> 

[PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Richard Zhao]

On Thu, May 10, 2012 at 02:48:19PM +0800, Shawn Guo wrote:
> On Wed, May 09, 2012 at 07:33:07PM +0800, Richard Zhao wrote:
> > Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> > ---
> >  arch/arm/boot/dts/imx6q-sabrelite.dts |   14 ++++++++++++++
> >  1 files changed, 14 insertions(+), 0 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
> > index 5b51deb..5a35bfd 100644
> > --- a/arch/arm/boot/dts/imx6q-sabrelite.dts
> > +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
> > @@ -110,4 +110,18 @@
> >  			regulator-always-on;
> >  		};
> >  	};
> > +
> > +	sound {
> > +		compatible = "fsl,imx6q-sabrelite-sgtl5000",
> > +			     "fsl,imx-audio-sgtl5000";
> > +		model = "imx6q-sabrelite-sgtl5000";
> > +		ssi-controller = <&ssi1>;
> > +		audio-codec = <&codec>;
> > +		audio-routing =
> > +			"MIC_IN", "Mic Jack",
> > +			"Mic Jack", "Mic Bias",
> 
> "Mic Bias" is a SUPPLY for both "MIC_IN" and "Mic Jack", so it should
> look like:
> 
>                        "Mic Jack", "Mic Bias",
>                        "MIC_IN", "Mic Bias",
Not really. The circuit:
MIC_IN <-- capacitor <--> Mic Jack
                      /
            Mic Bias /

DC can not pass the capacitor. So Mic Bias only supply Jack.

Thanks
Richard

> 
> Regards,
> Shawn
> 
> > +			"Headphone Jack", "HP_OUT";
> > +		mux-int-port = <1>;
> > +		mux-ext-port = <4>;
> > +	};
> >  };
> > -- 
> > 1.7.5.4
> > 
> > 
> 

Re: [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Shawn Guo]

On Thu, May 10, 2012 at 05:34:45PM +0800, Richard Zhao wrote:
> > "Mic Bias" is a SUPPLY for both "MIC_IN" and "Mic Jack", so it should
> > look like:
> > 
> >                        "Mic Jack", "Mic Bias",
> >                        "MIC_IN", "Mic Bias",
> Not really. The circuit:
> MIC_IN <-- capacitor <--> Mic Jack
>                       /
>             Mic Bias /
> 
The "Mic Bias" here is really a SGTL5000 internal supply.

Regards,
Shawn

> DC can not pass the capacitor. So Mic Bias only supply Jack.
> 

[PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Shawn Guo]

On Thu, May 10, 2012 at 05:34:45PM +0800, Richard Zhao wrote:
> > "Mic Bias" is a SUPPLY for both "MIC_IN" and "Mic Jack", so it should
> > look like:
> > 
> >                        "Mic Jack", "Mic Bias",
> >                        "MIC_IN", "Mic Bias",
> Not really. The circuit:
> MIC_IN <-- capacitor <--> Mic Jack
>                       /
>             Mic Bias /
> 
The "Mic Bias" here is really a SGTL5000 internal supply.

Regards,
Shawn

> DC can not pass the capacitor. So Mic Bias only supply Jack.
> 

Re: [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 320 bytes --]

On Thu, May 10, 2012 at 05:41:15PM +0800, Shawn Guo wrote:

> The "Mic Bias" here is really a SGTL5000 internal supply.

If it is then what's providing the bias to the mic?  It's common for
chips to have a micbias supply which comes out of the chip and is used
by mics, this is my understanding of what this circuit is.

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

[PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Mark Brown]

On Thu, May 10, 2012 at 05:41:15PM +0800, Shawn Guo wrote:

> The "Mic Bias" here is really a SGTL5000 internal supply.

If it is then what's providing the bias to the mic?  It's common for
chips to have a micbias supply which comes out of the chip and is used
by mics, this is my understanding of what this circuit is.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120510/58d87148/attachment-0001.sig>

Re: [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Shawn Guo]

On Thu, May 10, 2012 at 05:41:15PM +0800, Shawn Guo wrote:
> On Thu, May 10, 2012 at 05:34:45PM +0800, Richard Zhao wrote:
> > > "Mic Bias" is a SUPPLY for both "MIC_IN" and "Mic Jack", so it should
> > > look like:
> > > 
> > >                        "Mic Jack", "Mic Bias",
> > >                        "MIC_IN", "Mic Bias",
> > Not really. The circuit:
> > MIC_IN <-- capacitor <--> Mic Jack
> >                       /
> >             Mic Bias /
> > 
> The "Mic Bias" here is really a SGTL5000 internal supply.
> 
Look SGTL5000 datasheet for "MIC_BIAS".

-- 
Regards,
Shawn

[PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Shawn Guo]

On Thu, May 10, 2012 at 05:41:15PM +0800, Shawn Guo wrote:
> On Thu, May 10, 2012 at 05:34:45PM +0800, Richard Zhao wrote:
> > > "Mic Bias" is a SUPPLY for both "MIC_IN" and "Mic Jack", so it should
> > > look like:
> > > 
> > >                        "Mic Jack", "Mic Bias",
> > >                        "MIC_IN", "Mic Bias",
> > Not really. The circuit:
> > MIC_IN <-- capacitor <--> Mic Jack
> >                       /
> >             Mic Bias /
> > 
> The "Mic Bias" here is really a SGTL5000 internal supply.
> 
Look SGTL5000 datasheet for "MIC_BIAS".

-- 
Regards,
Shawn

Re: [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Richard Zhao]

On Thu, May 10, 2012 at 10:45:08AM +0100, Mark Brown wrote:
> On Thu, May 10, 2012 at 05:41:15PM +0800, Shawn Guo wrote:
> 
> > The "Mic Bias" here is really a SGTL5000 internal supply.
> 
> If it is then what's providing the bias to the mic?  It's common for
> chips to have a micbias supply which comes out of the chip and is used
> by mics, this is my understanding of what this circuit is.
+1

[PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Richard Zhao]

On Thu, May 10, 2012 at 10:45:08AM +0100, Mark Brown wrote:
> On Thu, May 10, 2012 at 05:41:15PM +0800, Shawn Guo wrote:
> 
> > The "Mic Bias" here is really a SGTL5000 internal supply.
> 
> If it is then what's providing the bias to the mic?  It's common for
> chips to have a micbias supply which comes out of the chip and is used
> by mics, this is my understanding of what this circuit is.
+1

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Richard Zhao]

On Thu, May 10, 2012 at 10:27:34AM +0100, Mark Brown wrote:
> On Thu, May 10, 2012 at 05:05:00PM +0800, Richard Zhao wrote:
> 
> > devm_pinctrl_get_select_default function is added in below commit which
> > is in pinctrl/for-next.
> 
> Oh, dear.  That's unfortunate, I guess it's not on a branch in pinctl
> which can be pulled separately (this is what I've been doing with things
> like regmap and regulator - creating new interfaces on easily mergeable
> branches)?  Looking at it from the other perspective, what goes wrong if
> we defer this patch?
I prefer to have a non-rebase pinctrl branch. We can not defer pinctrl
patch for all drivers. pinctrl will be so widely used.

Hi Linus,

Could you comment?

Thanks
Richard

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Richard Zhao]

On Thu, May 10, 2012 at 10:27:34AM +0100, Mark Brown wrote:
> On Thu, May 10, 2012 at 05:05:00PM +0800, Richard Zhao wrote:
> 
> > devm_pinctrl_get_select_default function is added in below commit which
> > is in pinctrl/for-next.
> 
> Oh, dear.  That's unfortunate, I guess it's not on a branch in pinctl
> which can be pulled separately (this is what I've been doing with things
> like regmap and regulator - creating new interfaces on easily mergeable
> branches)?  Looking at it from the other perspective, what goes wrong if
> we defer this patch?
I prefer to have a non-rebase pinctrl branch. We can not defer pinctrl
patch for all drivers. pinctrl will be so widely used.

Hi Linus,

Could you comment?

Thanks
Richard

Re: [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Shawn Guo]

On Thu, May 10, 2012 at 10:45:08AM +0100, Mark Brown wrote:
> On Thu, May 10, 2012 at 05:41:15PM +0800, Shawn Guo wrote:
> 
> > The "Mic Bias" here is really a SGTL5000 internal supply.
> 
> If it is then what's providing the bias to the mic?  It's common for
> chips to have a micbias supply which comes out of the chip and is used
> by mics, this is my understanding of what this circuit is.

I did not make myself clear, but you made :)  Yes, this is exactly the
thing on my mind, and the circuit will look like:

     STGTL5000        BOARD
		|
      MIC_IN ---+--- JACK
	^	|     ^
	|	|     |
	|	|     |
    MIC_BAIS----+-----/
		|

Isn't you helped me create this understanding? [1]

Regards,
Shawn

[1] http://article.gmane.org/gmane.linux.alsa.devel/96351

[PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Shawn Guo]

On Thu, May 10, 2012 at 10:45:08AM +0100, Mark Brown wrote:
> On Thu, May 10, 2012 at 05:41:15PM +0800, Shawn Guo wrote:
> 
> > The "Mic Bias" here is really a SGTL5000 internal supply.
> 
> If it is then what's providing the bias to the mic?  It's common for
> chips to have a micbias supply which comes out of the chip and is used
> by mics, this is my understanding of what this circuit is.

I did not make myself clear, but you made :)  Yes, this is exactly the
thing on my mind, and the circuit will look like:

     STGTL5000        BOARD
		|
      MIC_IN ---+--- JACK
	^	|     ^
	|	|     |
	|	|     |
    MIC_BAIS----+-----/
		|

Isn't you helped me create this understanding? [1]

Regards,
Shawn

[1] http://article.gmane.org/gmane.linux.alsa.devel/96351

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Linus Walleij]

On Thu, May 10, 2012 at 11:07 AM, Shawn Guo <shawn.guo@linaro.org> wrote:

> Pulling it into arm-soc as a dependency only means we will have it as
> a base for other branches that depend on.  It does not change anything
> about how the branch flows to Linus.  Arnd will only send those arm-soc
> branches that depend on sound/for-3.5 after it gets merged by Linus.

Oh... um... subject is about pinctrl ... but ... no..
Aha, he mean Torvalds! :-)

return -ELINWAL;

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Linus Walleij]

On Thu, May 10, 2012 at 11:07 AM, Shawn Guo <shawn.guo@linaro.org> wrote:

> Pulling it into arm-soc as a dependency only means we will have it as
> a base for other branches that depend on. ?It does not change anything
> about how the branch flows to Linus. ?Arnd will only send those arm-soc
> branches that depend on sound/for-3.5 after it gets merged by Linus.

Oh... um... subject is about pinctrl ... but ... no..
Aha, he mean Torvalds! :-)

return -ELINWAL;

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Linus Walleij]

On Thu, May 10, 2012 at 12:23 PM, Richard Zhao
<richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> wrote:
> On Thu, May 10, 2012 at 10:27:34AM +0100, Mark Brown wrote:
>> On Thu, May 10, 2012 at 05:05:00PM +0800, Richard Zhao wrote:
>>
>> > devm_pinctrl_get_select_default function is added in below commit which
>> > is in pinctrl/for-next.
>>
>> Oh, dear.  That's unfortunate, I guess it's not on a branch in pinctl
>> which can be pulled separately (...)
>
> I prefer to have a non-rebase pinctrl branch. We can not defer pinctrl
> patch for all drivers. pinctrl will be so widely used.
>
> Hi Linus,
>
> Could you comment?

You're lucky because a few ARM SoC:s wanted a stable tag to
use for pinctrl merges.

Ref:
git://git.linaro.org/people/triad/linux-pinctrl.git

The tag pinctrl-mergebase-20120418
contains the devm and other changes, Stephen is already using
that for Tegra stuff and it's solid as a rock. Newer patches are
put on top of this and since pinctrl has no deps in any directions
it will be requested for pull as soon as the merge window opens.

Yours,
Linus Walleij

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Linus Walleij]

On Thu, May 10, 2012 at 12:23 PM, Richard Zhao
<richard.zhao@freescale.com> wrote:
> On Thu, May 10, 2012 at 10:27:34AM +0100, Mark Brown wrote:
>> On Thu, May 10, 2012 at 05:05:00PM +0800, Richard Zhao wrote:
>>
>> > devm_pinctrl_get_select_default function is added in below commit which
>> > is in pinctrl/for-next.
>>
>> Oh, dear. ?That's unfortunate, I guess it's not on a branch in pinctl
>> which can be pulled separately (...)
>
> I prefer to have a non-rebase pinctrl branch. We can not defer pinctrl
> patch for all drivers. pinctrl will be so widely used.
>
> Hi Linus,
>
> Could you comment?

You're lucky because a few ARM SoC:s wanted a stable tag to
use for pinctrl merges.

Ref:
git://git.linaro.org/people/triad/linux-pinctrl.git

The tag pinctrl-mergebase-20120418
contains the devm and other changes, Stephen is already using
that for Tegra stuff and it's solid as a rock. Newer patches are
put on top of this and since pinctrl has no deps in any directions
it will be requested for pull as soon as the merge window opens.

Yours,
Linus Walleij

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Shawn Guo]

On Thu, May 10, 2012 at 10:25:36AM +0100, Mark Brown wrote:
> On Thu, May 10, 2012 at 05:07:18PM +0800, Shawn Guo wrote:
> 
> > Pulling it into arm-soc as a dependency only means we will have it as
> > a base for other branches that depend on.  It does not change anything
> > about how the branch flows to Linus.  Arnd will only send those arm-soc
> > branches that depend on sound/for-3.5 after it gets merged by Linus.
> 
> I don't see what difference that really makes to anything...  exactly
> who sends pull requests to Linus is pretty immaterial, really.

Ok, since you do mind having sound branch pulled into arm-soc to help
this patch go through arm-soc in the coming merge window, let's wait
for the next.

-- 
Regards,
Shawn

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Shawn Guo]

On Thu, May 10, 2012 at 10:25:36AM +0100, Mark Brown wrote:
> On Thu, May 10, 2012 at 05:07:18PM +0800, Shawn Guo wrote:
> 
> > Pulling it into arm-soc as a dependency only means we will have it as
> > a base for other branches that depend on.  It does not change anything
> > about how the branch flows to Linus.  Arnd will only send those arm-soc
> > branches that depend on sound/for-3.5 after it gets merged by Linus.
> 
> I don't see what difference that really makes to anything...  exactly
> who sends pull requests to Linus is pretty immaterial, really.

Ok, since you do mind having sound branch pulled into arm-soc to help
this patch go through arm-soc in the coming merge window, let's wait
for the next.

-- 
Regards,
Shawn

Re: [PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic

[Shawn Guo]

On Thu, May 10, 2012 at 02:34:49PM +0800, Shawn Guo wrote:
> On Thu, May 10, 2012 at 09:23:58AM +0530, Vinod Koul wrote:
> > On Wed, 2012-05-09 at 19:33 +0800, Richard Zhao wrote:
> > > device_prep_dma_cyclic may be call in audio trigger function which is
> > > atomic context, so we make it atomic too.
> > > 
> > >  - change channel0 lock to spinlock.
> > >  - Use polling to wait for channel0 finish running.
> > > 
> > > Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > Acked By: Vinod Koul <vinod.koul-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> > 
> Applied on imx/dt branch with Vinod's ack.  Thanks.
> 
Hi Vinod,

Since Mark wouldn't like to have sound tree pulled into arm-soc to help
a couple of patches in the series get merged in the coming window, I can
not take the series as a whole to go with arm-soc.  It makes less sense
to have this patch go arm-soc then, so please take the patch.

-- 
Regards,
Shawn

[PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic

[Shawn Guo]

On Thu, May 10, 2012 at 02:34:49PM +0800, Shawn Guo wrote:
> On Thu, May 10, 2012 at 09:23:58AM +0530, Vinod Koul wrote:
> > On Wed, 2012-05-09 at 19:33 +0800, Richard Zhao wrote:
> > > device_prep_dma_cyclic may be call in audio trigger function which is
> > > atomic context, so we make it atomic too.
> > > 
> > >  - change channel0 lock to spinlock.
> > >  - Use polling to wait for channel0 finish running.
> > > 
> > > Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> > Acked By: Vinod Koul <vinod.koul@linux.intel.com>
> > 
> Applied on imx/dt branch with Vinod's ack.  Thanks.
> 
Hi Vinod,

Since Mark wouldn't like to have sound tree pulled into arm-soc to help
a couple of patches in the series get merged in the coming window, I can
not take the series as a whole to go with arm-soc.  It makes less sense
to have this patch go arm-soc then, so please take the patch.

-- 
Regards,
Shawn

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Richard Zhao]

On Thu, May 10, 2012 at 02:26:31PM +0200, Linus Walleij wrote:
> On Thu, May 10, 2012 at 12:23 PM, Richard Zhao
> <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> wrote:
> > On Thu, May 10, 2012 at 10:27:34AM +0100, Mark Brown wrote:
> >> On Thu, May 10, 2012 at 05:05:00PM +0800, Richard Zhao wrote:
> >>
> >> > devm_pinctrl_get_select_default function is added in below commit which
> >> > is in pinctrl/for-next.
> >>
> >> Oh, dear.  That's unfortunate, I guess it's not on a branch in pinctl
> >> which can be pulled separately (...)
> >
> > I prefer to have a non-rebase pinctrl branch. We can not defer pinctrl
> > patch for all drivers. pinctrl will be so widely used.
> >
> > Hi Linus,
> >
> > Could you comment?
> 
> You're lucky because a few ARM SoC:s wanted a stable tag to
> use for pinctrl merges.
> 
> Ref:
> git://git.linaro.org/people/triad/linux-pinctrl.git
> 
> The tag pinctrl-mergebase-20120418
I only find the tag at your kernel.org git tree. Linaro switched git
server again? strange.

Mark,

Are you ok with that?

Thanks
Richard
> contains the devm and other changes, Stephen is already using
> that for Tegra stuff and it's solid as a rock. Newer patches are
> put on top of this and since pinctrl has no deps in any directions
> it will be requested for pull as soon as the merge window opens.
> 
> Yours,
> Linus Walleij
> 

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Richard Zhao]

On Thu, May 10, 2012 at 02:26:31PM +0200, Linus Walleij wrote:
> On Thu, May 10, 2012 at 12:23 PM, Richard Zhao
> <richard.zhao@freescale.com> wrote:
> > On Thu, May 10, 2012 at 10:27:34AM +0100, Mark Brown wrote:
> >> On Thu, May 10, 2012 at 05:05:00PM +0800, Richard Zhao wrote:
> >>
> >> > devm_pinctrl_get_select_default function is added in below commit which
> >> > is in pinctrl/for-next.
> >>
> >> Oh, dear. ?That's unfortunate, I guess it's not on a branch in pinctl
> >> which can be pulled separately (...)
> >
> > I prefer to have a non-rebase pinctrl branch. We can not defer pinctrl
> > patch for all drivers. pinctrl will be so widely used.
> >
> > Hi Linus,
> >
> > Could you comment?
> 
> You're lucky because a few ARM SoC:s wanted a stable tag to
> use for pinctrl merges.
> 
> Ref:
> git://git.linaro.org/people/triad/linux-pinctrl.git
> 
> The tag pinctrl-mergebase-20120418
I only find the tag at your kernel.org git tree. Linaro switched git
server again? strange.

Mark,

Are you ok with that?

Thanks
Richard
> contains the devm and other changes, Stephen is already using
> that for Tegra stuff and it's solid as a rock. Newer patches are
> put on top of this and since pinctrl has no deps in any directions
> it will be requested for pull as soon as the merge window opens.
> 
> Yours,
> Linus Walleij
> 

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Linus Walleij]

On Thu, May 10, 2012 at 3:41 PM, Richard Zhao
<richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> wrote:

>> Ref:
>> git://git.linaro.org/people/triad/linux-pinctrl.git
>>
>> The tag pinctrl-mergebase-20120418
> I only find the tag at your kernel.org git tree. Linaro switched git
> server again? strange.

No it's me who is strange.
I meant to link the kernel.org server but my browser cache
wanted something else.

This is the actual tag.
http://git.kernel.org/?p=linux/kernel/git/linusw/linux-pinctrl.git;a=commit;h=dcb5dbc305b975cccf40942feba40964069541d3

Yours,
Linus Walleij

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Linus Walleij]

On Thu, May 10, 2012 at 3:41 PM, Richard Zhao
<richard.zhao@freescale.com> wrote:

>> Ref:
>> git://git.linaro.org/people/triad/linux-pinctrl.git
>>
>> The tag pinctrl-mergebase-20120418
> I only find the tag at your kernel.org git tree. Linaro switched git
> server again? strange.

No it's me who is strange.
I meant to link the kernel.org server but my browser cache
wanted something else.

This is the actual tag.
http://git.kernel.org/?p=linux/kernel/git/linusw/linux-pinctrl.git;a=commit;h=dcb5dbc305b975cccf40942feba40964069541d3

Yours,
Linus Walleij

Re: [alsa-devel] [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Shawn Guo]

On Thu, May 10, 2012 at 07:49:58PM +0800, Shawn Guo wrote:
> I did not make myself clear, but you made :)  Yes, this is exactly the
> thing on my mind, and the circuit will look like:
> 
It seems I was just misled by the impression that we should have
a route of MIC_IN <-- Mic Bais.  I just checked through the SGTL5000
data sheet and it does not really mention about this.

Richard,

Will test your route setting and then apply the patch if everything
goes fine.

-- 
Regards,
Shawn

[alsa-devel] [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Shawn Guo]

On Thu, May 10, 2012 at 07:49:58PM +0800, Shawn Guo wrote:
> I did not make myself clear, but you made :)  Yes, this is exactly the
> thing on my mind, and the circuit will look like:
> 
It seems I was just misled by the impression that we should have
a route of MIC_IN <-- Mic Bais.  I just checked through the SGTL5000
data sheet and it does not really mention about this.

Richard,

Will test your route setting and then apply the patch if everything
goes fine.

-- 
Regards,
Shawn

Re: [alsa-devel] [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Stephen Warren]

On 05/10/2012 03:05 AM, Richard Zhao wrote:
> On Thu, May 10, 2012 at 09:44:04AM +0100, Mark Brown wrote:
>> On Thu, May 10, 2012 at 02:39:06PM +0800, Shawn Guo wrote:
>>> On Thu, May 10, 2012 at 08:35:33AM +0800, Richard Zhao wrote:
>>
>>>> It's based on your for-next. But for working, it depends on
>>>> pinctl/for-next.
>>
>>> Mark, may I have your ack to have it go through arm-soc?  I will ask
>>> Arnd pull your sound/for-v3.5 branch into arm-soc as a dependency.
>>> You need to ensure the branch will not be rebased.
>>
>> for-3.5 is the entire undifferentiated blob of ASoC stuff, it's not
>> really suitable for merging elsewhere.  It won't actually get rebased
>> but the idea of merging it into other trees doesn't seem terribly
>> clever, it'd make having topic branches in arm-soc a bit of a joke and
>> if you pull it right now you'll get problems in -next due to the the
>> ux500 stuff.
>>
>> What does "working" mean in this context - what happens without the
>> pinctl changes?
> devm_pinctrl_get_select_default function is added in below commit which
> is in pinctrl/for-next.
> 
> commit 6d4ca1fb467932773da7b808c52f3d7ef4461ba0
> Author: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> Date:   Mon Apr 16 10:51:00 2012 -0600
> 
>     pinctrl: implement devm_pinctrl_get()/put()
>     
>     These functions allow the driver core to automatically clean up any
>     allocations made by drivers, thus leading to simplified drivers.
>     
>     Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>     Signed-off-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> 
> 
> So it'll fail compile without pinctrl/for-next. I guess Linus may need
> to prepare a non-rebase base for others to merge.

(CCing Linus)

There is one already.

git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
tag pinctrl-mergebase-20120418
The commit is in for-next and devel branches, but not the tip of those.

[alsa-devel] [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Stephen Warren]

On 05/10/2012 03:05 AM, Richard Zhao wrote:
> On Thu, May 10, 2012 at 09:44:04AM +0100, Mark Brown wrote:
>> On Thu, May 10, 2012 at 02:39:06PM +0800, Shawn Guo wrote:
>>> On Thu, May 10, 2012 at 08:35:33AM +0800, Richard Zhao wrote:
>>
>>>> It's based on your for-next. But for working, it depends on
>>>> pinctl/for-next.
>>
>>> Mark, may I have your ack to have it go through arm-soc?  I will ask
>>> Arnd pull your sound/for-v3.5 branch into arm-soc as a dependency.
>>> You need to ensure the branch will not be rebased.
>>
>> for-3.5 is the entire undifferentiated blob of ASoC stuff, it's not
>> really suitable for merging elsewhere.  It won't actually get rebased
>> but the idea of merging it into other trees doesn't seem terribly
>> clever, it'd make having topic branches in arm-soc a bit of a joke and
>> if you pull it right now you'll get problems in -next due to the the
>> ux500 stuff.
>>
>> What does "working" mean in this context - what happens without the
>> pinctl changes?
> devm_pinctrl_get_select_default function is added in below commit which
> is in pinctrl/for-next.
> 
> commit 6d4ca1fb467932773da7b808c52f3d7ef4461ba0
> Author: Stephen Warren <swarren@nvidia.com>
> Date:   Mon Apr 16 10:51:00 2012 -0600
> 
>     pinctrl: implement devm_pinctrl_get()/put()
>     
>     These functions allow the driver core to automatically clean up any
>     allocations made by drivers, thus leading to simplified drivers.
>     
>     Signed-off-by: Stephen Warren <swarren@nvidia.com>
>     Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> 
> 
> So it'll fail compile without pinctrl/for-next. I guess Linus may need
> to prepare a non-rebase base for others to merge.

(CCing Linus)

There is one already.

git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
tag pinctrl-mergebase-20120418
The commit is in for-next and devel branches, but not the tip of those.

Re: [PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic

[Vinod Koul]

On Thu, 2012-05-10 at 20:37 +0800, Shawn Guo wrote:
> On Thu, May 10, 2012 at 02:34:49PM +0800, Shawn Guo wrote:
> > On Thu, May 10, 2012 at 09:23:58AM +0530, Vinod Koul wrote:
> > > On Wed, 2012-05-09 at 19:33 +0800, Richard Zhao wrote:
> > > > device_prep_dma_cyclic may be call in audio trigger function which is
> > > > atomic context, so we make it atomic too.
> > > > 
> > > >  - change channel0 lock to spinlock.
> > > >  - Use polling to wait for channel0 finish running.
> > > > 
> > > > Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > > Acked By: Vinod Koul <vinod.koul-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> > > 
> > Applied on imx/dt branch with Vinod's ack.  Thanks.
> > 
> Hi Vinod,
> 
> Since Mark wouldn't like to have sound tree pulled into arm-soc to help
> a couple of patches in the series get merged in the coming window, I can
> not take the series as a whole to go with arm-soc.  It makes less sense
> to have this patch go arm-soc then, so please take the patch.
Sure, care to give an ACK before I apply.

-- 
~Vinod

[PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic

[Vinod Koul]

On Thu, 2012-05-10 at 20:37 +0800, Shawn Guo wrote:
> On Thu, May 10, 2012 at 02:34:49PM +0800, Shawn Guo wrote:
> > On Thu, May 10, 2012 at 09:23:58AM +0530, Vinod Koul wrote:
> > > On Wed, 2012-05-09 at 19:33 +0800, Richard Zhao wrote:
> > > > device_prep_dma_cyclic may be call in audio trigger function which is
> > > > atomic context, so we make it atomic too.
> > > > 
> > > >  - change channel0 lock to spinlock.
> > > >  - Use polling to wait for channel0 finish running.
> > > > 
> > > > Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> > > Acked By: Vinod Koul <vinod.koul@linux.intel.com>
> > > 
> > Applied on imx/dt branch with Vinod's ack.  Thanks.
> > 
> Hi Vinod,
> 
> Since Mark wouldn't like to have sound tree pulled into arm-soc to help
> a couple of patches in the series get merged in the coming window, I can
> not take the series as a whole to go with arm-soc.  It makes less sense
> to have this patch go arm-soc then, so please take the patch.
Sure, care to give an ACK before I apply.

-- 
~Vinod

Re: [PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic

[Shawn Guo]

On Fri, May 11, 2012 at 08:22:56AM +0530, Vinod Koul wrote:
> Sure, care to give an ACK before I apply.
> 
Acked-by: Shawn Guo <shawn.guo@linaro.org>

[PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic

[Shawn Guo]

On Fri, May 11, 2012 at 08:22:56AM +0530, Vinod Koul wrote:
> Sure, care to give an ACK before I apply.
> 
Acked-by: Shawn Guo <shawn.guo@linaro.org>

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Shawn Guo]

On Thu, May 10, 2012 at 02:26:31PM +0200, Linus Walleij wrote:
> The tag pinctrl-mergebase-20120418
> contains the devm and other changes, Stephen is already using
> that for Tegra stuff and it's solid as a rock. Newer patches are
> put on top of this and since pinctrl has no deps in any directions
> it will be requested for pull as soon as the merge window opens.
> 
Hi Linus,

pinctrl-mergebase-20120418 is not enough for me.  I need mxs and dummy
states support.  So if your devel branch will never be rebased, we can
simply ask Arnd and Olof to get that as the dependent branch?

-- 
Regards,
Shawn

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Shawn Guo]

On Thu, May 10, 2012 at 02:26:31PM +0200, Linus Walleij wrote:
> The tag pinctrl-mergebase-20120418
> contains the devm and other changes, Stephen is already using
> that for Tegra stuff and it's solid as a rock. Newer patches are
> put on top of this and since pinctrl has no deps in any directions
> it will be requested for pull as soon as the merge window opens.
> 
Hi Linus,

pinctrl-mergebase-20120418 is not enough for me.  I need mxs and dummy
states support.  So if your devel branch will never be rebased, we can
simply ask Arnd and Olof to get that as the dependent branch?

-- 
Regards,
Shawn

Re: [PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support

[Shawn Guo]

On Wed, May 09, 2012 at 07:32:59PM +0800, Richard Zhao wrote:
>   ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support
>   ARM: dts: imx6q-sabrelite: add audmux pinctrl support
>   ARM: imx6q: add ssi1_ipg clk_lookup
>   ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000
>   ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000
>   ARM: dts: imx6q-sabrelite: add serial2 pinctrl support

I picked up above 6 patches.  Thanks.

-- 
Regards,
Shawn

[PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support

[Shawn Guo]

On Wed, May 09, 2012 at 07:32:59PM +0800, Richard Zhao wrote:
>   ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support
>   ARM: dts: imx6q-sabrelite: add audmux pinctrl support
>   ARM: imx6q: add ssi1_ipg clk_lookup
>   ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000
>   ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000
>   ARM: dts: imx6q-sabrelite: add serial2 pinctrl support

I picked up above 6 patches.  Thanks.

-- 
Regards,
Shawn

Re: [PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic

[Vinod Koul]

On Wed, 2012-05-09 at 19:33 +0800, Richard Zhao wrote:
> device_prep_dma_cyclic may be call in audio trigger function which is
> atomic context, so we make it atomic too.
> 
>  - change channel0 lock to spinlock.
>  - Use polling to wait for channel0 finish running.
> 
> Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Can you pls rebase this against the slave-dma next and resend.
It fails to apply for me.
> ---
>  drivers/dma/imx-sdma.c |   57 ++++++++++++++++++++++++++---------------------
>  1 files changed, 31 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index fddccae..4fd48eb 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -24,7 +24,7 @@
>  #include <linux/mm.h>
>  #include <linux/interrupt.h>
>  #include <linux/clk.h>
> -#include <linux/wait.h>
> +#include <linux/delay.h>
>  #include <linux/sched.h>
>  #include <linux/semaphore.h>
>  #include <linux/spinlock.h>
> @@ -324,7 +324,7 @@ struct sdma_engine {
>  	struct dma_device		dma_device;
>  	struct clk			*clk_ipg;
>  	struct clk			*clk_ahb;
> -	struct mutex			channel_0_lock;
> +	spinlock_t		channel_0_lock;
>  	struct sdma_script_start_addrs	*script_addrs;
>  };
>  
> @@ -402,19 +402,27 @@ static void sdma_enable_channel(struct sdma_engine *sdma, int channel)
>  }
>  
>  /*
> - * sdma_run_channel - run a channel and wait till it's done
> + * sdma_run_channel0 - run a channel and wait till it's done
>   */
> -static int sdma_run_channel(struct sdma_channel *sdmac)
> +static int sdma_run_channel0(struct sdma_engine *sdma)
>  {
> -	struct sdma_engine *sdma = sdmac->sdma;
> -	int channel = sdmac->channel;
>  	int ret;
> +	unsigned long timeout = 500;
>  
> -	init_completion(&sdmac->done);
> +	sdma_enable_channel(sdma, 0);
>  
> -	sdma_enable_channel(sdma, channel);
> +	while (!(ret = readl_relaxed(sdma->regs + SDMA_H_INTR) & 1)) {
> +		if (timeout-- <= 0)
> +			break;
> +		udelay(1);
> +	}
>  
> -	ret = wait_for_completion_timeout(&sdmac->done, HZ);
> +	if (ret) {
> +		/* Clear the interrupt status */
> +		writel_relaxed(ret, sdma->regs + SDMA_H_INTR);
> +	} else {
> +		dev_err(sdma->dev, "Timeout waiting for CH0 ready\n");
> +	}
>  
>  	return ret ? 0 : -ETIMEDOUT;
>  }
> @@ -426,17 +434,17 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
>  	void *buf_virt;
>  	dma_addr_t buf_phys;
>  	int ret;
> -
> -	mutex_lock(&sdma->channel_0_lock);
> +	unsigned long flags;
>  
>  	buf_virt = dma_alloc_coherent(NULL,
>  			size,
>  			&buf_phys, GFP_KERNEL);
>  	if (!buf_virt) {
> -		ret = -ENOMEM;
> -		goto err_out;
> +		return -ENOMEM;
>  	}
>  
> +	spin_lock_irqsave(&sdma->channel_0_lock, flags);
> +
>  	bd0->mode.command = C0_SETPM;
>  	bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD;
>  	bd0->mode.count = size / 2;
> @@ -445,12 +453,11 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
>  
>  	memcpy(buf_virt, buf, size);
>  
> -	ret = sdma_run_channel(&sdma->channel[0]);
> +	ret = sdma_run_channel0(sdma);
>  
> -	dma_free_coherent(NULL, size, buf_virt, buf_phys);
> +	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
>  
> -err_out:
> -	mutex_unlock(&sdma->channel_0_lock);
> +	dma_free_coherent(NULL, size, buf_virt, buf_phys);
>  
>  	return ret;
>  }
> @@ -539,10 +546,6 @@ static void mxc_sdma_handle_channel(struct sdma_channel *sdmac)
>  {
>  	complete(&sdmac->done);
>  
> -	/* not interested in channel 0 interrupts */
> -	if (sdmac->channel == 0)
> -		return;
> -
>  	if (sdmac->flags & IMX_DMA_SG_LOOP)
>  		sdma_handle_channel_loop(sdmac);
>  	else
> @@ -555,6 +558,8 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id)
>  	unsigned long stat;
>  
>  	stat = readl_relaxed(sdma->regs + SDMA_H_INTR);
> +	/* not interested in channel 0 interrupts */
> +	stat &= ~1;
>  	writel_relaxed(stat, sdma->regs + SDMA_H_INTR);
>  
>  	while (stat) {
> @@ -660,6 +665,7 @@ static int sdma_load_context(struct sdma_channel *sdmac)
>  	struct sdma_context_data *context = sdma->context;
>  	struct sdma_buffer_descriptor *bd0 = sdma->channel[0].bd;
>  	int ret;
> +	unsigned long flags;
>  
>  	if (sdmac->direction == DMA_DEV_TO_MEM) {
>  		load_address = sdmac->pc_from_device;
> @@ -677,7 +683,7 @@ static int sdma_load_context(struct sdma_channel *sdmac)
>  	dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", (u32)sdmac->event_mask[0]);
>  	dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", (u32)sdmac->event_mask[1]);
>  
> -	mutex_lock(&sdma->channel_0_lock);
> +	spin_lock_irqsave(&sdma->channel_0_lock, flags);
>  
>  	memset(context, 0, sizeof(*context));
>  	context->channel_state.pc = load_address;
> @@ -696,10 +702,9 @@ static int sdma_load_context(struct sdma_channel *sdmac)
>  	bd0->mode.count = sizeof(*context) / 4;
>  	bd0->buffer_addr = sdma->context_phys;
>  	bd0->ext_buffer_addr = 2048 + (sizeof(*context) / 4) * channel;
> +	ret = sdma_run_channel0(sdma);
>  
> -	ret = sdma_run_channel(&sdma->channel[0]);
> -
> -	mutex_unlock(&sdma->channel_0_lock);
> +	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
>  
>  	return ret;
>  }
> @@ -1305,7 +1310,7 @@ static int __init sdma_probe(struct platform_device *pdev)
>  	if (!sdma)
>  		return -ENOMEM;
>  
> -	mutex_init(&sdma->channel_0_lock);
> +	spin_lock_init(&sdma->channel_0_lock);
>  
>  	sdma->dev = &pdev->dev;
>  


-- 
~Vinod

[PATCH V2 01/11] dma: imx-sdma: make channel0 operations atomic

[Vinod Koul]

On Wed, 2012-05-09 at 19:33 +0800, Richard Zhao wrote:
> device_prep_dma_cyclic may be call in audio trigger function which is
> atomic context, so we make it atomic too.
> 
>  - change channel0 lock to spinlock.
>  - Use polling to wait for channel0 finish running.
> 
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Can you pls rebase this against the slave-dma next and resend.
It fails to apply for me.
> ---
>  drivers/dma/imx-sdma.c |   57 ++++++++++++++++++++++++++---------------------
>  1 files changed, 31 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index fddccae..4fd48eb 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -24,7 +24,7 @@
>  #include <linux/mm.h>
>  #include <linux/interrupt.h>
>  #include <linux/clk.h>
> -#include <linux/wait.h>
> +#include <linux/delay.h>
>  #include <linux/sched.h>
>  #include <linux/semaphore.h>
>  #include <linux/spinlock.h>
> @@ -324,7 +324,7 @@ struct sdma_engine {
>  	struct dma_device		dma_device;
>  	struct clk			*clk_ipg;
>  	struct clk			*clk_ahb;
> -	struct mutex			channel_0_lock;
> +	spinlock_t		channel_0_lock;
>  	struct sdma_script_start_addrs	*script_addrs;
>  };
>  
> @@ -402,19 +402,27 @@ static void sdma_enable_channel(struct sdma_engine *sdma, int channel)
>  }
>  
>  /*
> - * sdma_run_channel - run a channel and wait till it's done
> + * sdma_run_channel0 - run a channel and wait till it's done
>   */
> -static int sdma_run_channel(struct sdma_channel *sdmac)
> +static int sdma_run_channel0(struct sdma_engine *sdma)
>  {
> -	struct sdma_engine *sdma = sdmac->sdma;
> -	int channel = sdmac->channel;
>  	int ret;
> +	unsigned long timeout = 500;
>  
> -	init_completion(&sdmac->done);
> +	sdma_enable_channel(sdma, 0);
>  
> -	sdma_enable_channel(sdma, channel);
> +	while (!(ret = readl_relaxed(sdma->regs + SDMA_H_INTR) & 1)) {
> +		if (timeout-- <= 0)
> +			break;
> +		udelay(1);
> +	}
>  
> -	ret = wait_for_completion_timeout(&sdmac->done, HZ);
> +	if (ret) {
> +		/* Clear the interrupt status */
> +		writel_relaxed(ret, sdma->regs + SDMA_H_INTR);
> +	} else {
> +		dev_err(sdma->dev, "Timeout waiting for CH0 ready\n");
> +	}
>  
>  	return ret ? 0 : -ETIMEDOUT;
>  }
> @@ -426,17 +434,17 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
>  	void *buf_virt;
>  	dma_addr_t buf_phys;
>  	int ret;
> -
> -	mutex_lock(&sdma->channel_0_lock);
> +	unsigned long flags;
>  
>  	buf_virt = dma_alloc_coherent(NULL,
>  			size,
>  			&buf_phys, GFP_KERNEL);
>  	if (!buf_virt) {
> -		ret = -ENOMEM;
> -		goto err_out;
> +		return -ENOMEM;
>  	}
>  
> +	spin_lock_irqsave(&sdma->channel_0_lock, flags);
> +
>  	bd0->mode.command = C0_SETPM;
>  	bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD;
>  	bd0->mode.count = size / 2;
> @@ -445,12 +453,11 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
>  
>  	memcpy(buf_virt, buf, size);
>  
> -	ret = sdma_run_channel(&sdma->channel[0]);
> +	ret = sdma_run_channel0(sdma);
>  
> -	dma_free_coherent(NULL, size, buf_virt, buf_phys);
> +	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
>  
> -err_out:
> -	mutex_unlock(&sdma->channel_0_lock);
> +	dma_free_coherent(NULL, size, buf_virt, buf_phys);
>  
>  	return ret;
>  }
> @@ -539,10 +546,6 @@ static void mxc_sdma_handle_channel(struct sdma_channel *sdmac)
>  {
>  	complete(&sdmac->done);
>  
> -	/* not interested in channel 0 interrupts */
> -	if (sdmac->channel == 0)
> -		return;
> -
>  	if (sdmac->flags & IMX_DMA_SG_LOOP)
>  		sdma_handle_channel_loop(sdmac);
>  	else
> @@ -555,6 +558,8 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id)
>  	unsigned long stat;
>  
>  	stat = readl_relaxed(sdma->regs + SDMA_H_INTR);
> +	/* not interested in channel 0 interrupts */
> +	stat &= ~1;
>  	writel_relaxed(stat, sdma->regs + SDMA_H_INTR);
>  
>  	while (stat) {
> @@ -660,6 +665,7 @@ static int sdma_load_context(struct sdma_channel *sdmac)
>  	struct sdma_context_data *context = sdma->context;
>  	struct sdma_buffer_descriptor *bd0 = sdma->channel[0].bd;
>  	int ret;
> +	unsigned long flags;
>  
>  	if (sdmac->direction == DMA_DEV_TO_MEM) {
>  		load_address = sdmac->pc_from_device;
> @@ -677,7 +683,7 @@ static int sdma_load_context(struct sdma_channel *sdmac)
>  	dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", (u32)sdmac->event_mask[0]);
>  	dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", (u32)sdmac->event_mask[1]);
>  
> -	mutex_lock(&sdma->channel_0_lock);
> +	spin_lock_irqsave(&sdma->channel_0_lock, flags);
>  
>  	memset(context, 0, sizeof(*context));
>  	context->channel_state.pc = load_address;
> @@ -696,10 +702,9 @@ static int sdma_load_context(struct sdma_channel *sdmac)
>  	bd0->mode.count = sizeof(*context) / 4;
>  	bd0->buffer_addr = sdma->context_phys;
>  	bd0->ext_buffer_addr = 2048 + (sizeof(*context) / 4) * channel;
> +	ret = sdma_run_channel0(sdma);
>  
> -	ret = sdma_run_channel(&sdma->channel[0]);
> -
> -	mutex_unlock(&sdma->channel_0_lock);
> +	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
>  
>  	return ret;
>  }
> @@ -1305,7 +1310,7 @@ static int __init sdma_probe(struct platform_device *pdev)
>  	if (!sdma)
>  		return -ENOMEM;
>  
> -	mutex_init(&sdma->channel_0_lock);
> +	spin_lock_init(&sdma->channel_0_lock);
>  
>  	sdma->dev = &pdev->dev;
>  


-- 
~Vinod

[PATCH Rebase 1/1] dma: imx-sdma: make channel0 operations atomic

[Richard Zhao]

device_prep_dma_cyclic may be call in audio trigger function which is
atomic context, so we make it atomic too.

 - change channel0 lock to spinlock.
 - Use polling to wait for channel0 finish running.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 drivers/dma/imx-sdma.c |   57 ++++++++++++++++++++++++++---------------------
 1 files changed, 31 insertions(+), 26 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index d3e38e2..79aa749 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -24,7 +24,7 @@
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
-#include <linux/wait.h>
+#include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/semaphore.h>
 #include <linux/spinlock.h>
@@ -323,7 +323,7 @@ struct sdma_engine {
 	dma_addr_t			context_phys;
 	struct dma_device		dma_device;
 	struct clk			*clk;
-	struct mutex			channel_0_lock;
+	spinlock_t			channel_0_lock;
 	struct sdma_script_start_addrs	*script_addrs;
 };
 
@@ -401,19 +401,27 @@ static void sdma_enable_channel(struct sdma_engine *sdma, int channel)
 }
 
 /*
- * sdma_run_channel - run a channel and wait till it's done
+ * sdma_run_channel0 - run a channel and wait till it's done
  */
-static int sdma_run_channel(struct sdma_channel *sdmac)
+static int sdma_run_channel0(struct sdma_engine *sdma)
 {
-	struct sdma_engine *sdma = sdmac->sdma;
-	int channel = sdmac->channel;
 	int ret;
+	unsigned long timeout = 500;
 
-	init_completion(&sdmac->done);
+	sdma_enable_channel(sdma, 0);
 
-	sdma_enable_channel(sdma, channel);
+	while (!(ret = readl_relaxed(sdma->regs + SDMA_H_INTR) & 1)) {
+		if (timeout-- <= 0)
+			break;
+		udelay(1);
+	}
 
-	ret = wait_for_completion_timeout(&sdmac->done, HZ);
+	if (ret) {
+		/* Clear the interrupt status */
+		writel_relaxed(ret, sdma->regs + SDMA_H_INTR);
+	} else {
+		dev_err(sdma->dev, "Timeout waiting for CH0 ready\n");
+	}
 
 	return ret ? 0 : -ETIMEDOUT;
 }
@@ -425,17 +433,17 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
 	void *buf_virt;
 	dma_addr_t buf_phys;
 	int ret;
-
-	mutex_lock(&sdma->channel_0_lock);
+	unsigned long flags;
 
 	buf_virt = dma_alloc_coherent(NULL,
 			size,
 			&buf_phys, GFP_KERNEL);
 	if (!buf_virt) {
-		ret = -ENOMEM;
-		goto err_out;
+		return -ENOMEM;
 	}
 
+	spin_lock_irqsave(&sdma->channel_0_lock, flags);
+
 	bd0->mode.command = C0_SETPM;
 	bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD;
 	bd0->mode.count = size / 2;
@@ -444,12 +452,11 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
 
 	memcpy(buf_virt, buf, size);
 
-	ret = sdma_run_channel(&sdma->channel[0]);
+	ret = sdma_run_channel0(sdma);
 
-	dma_free_coherent(NULL, size, buf_virt, buf_phys);
+	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
-err_out:
-	mutex_unlock(&sdma->channel_0_lock);
+	dma_free_coherent(NULL, size, buf_virt, buf_phys);
 
 	return ret;
 }
@@ -538,10 +545,6 @@ static void mxc_sdma_handle_channel(struct sdma_channel *sdmac)
 {
 	complete(&sdmac->done);
 
-	/* not interested in channel 0 interrupts */
-	if (sdmac->channel == 0)
-		return;
-
 	if (sdmac->flags & IMX_DMA_SG_LOOP)
 		sdma_handle_channel_loop(sdmac);
 	else
@@ -554,6 +557,8 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id)
 	unsigned long stat;
 
 	stat = readl_relaxed(sdma->regs + SDMA_H_INTR);
+	/* not interested in channel 0 interrupts */
+	stat &= ~1;
 	writel_relaxed(stat, sdma->regs + SDMA_H_INTR);
 
 	while (stat) {
@@ -659,6 +664,7 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	struct sdma_context_data *context = sdma->context;
 	struct sdma_buffer_descriptor *bd0 = sdma->channel[0].bd;
 	int ret;
+	unsigned long flags;
 
 	if (sdmac->direction == DMA_DEV_TO_MEM) {
 		load_address = sdmac->pc_from_device;
@@ -676,7 +682,7 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", (u32)sdmac->event_mask[0]);
 	dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", (u32)sdmac->event_mask[1]);
 
-	mutex_lock(&sdma->channel_0_lock);
+	spin_lock_irqsave(&sdma->channel_0_lock, flags);
 
 	memset(context, 0, sizeof(*context));
 	context->channel_state.pc = load_address;
@@ -695,10 +701,9 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	bd0->mode.count = sizeof(*context) / 4;
 	bd0->buffer_addr = sdma->context_phys;
 	bd0->ext_buffer_addr = 2048 + (sizeof(*context) / 4) * channel;
+	ret = sdma_run_channel0(sdma);
 
-	ret = sdma_run_channel(&sdma->channel[0]);
-
-	mutex_unlock(&sdma->channel_0_lock);
+	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
 	return ret;
 }
@@ -1297,7 +1302,7 @@ static int __init sdma_probe(struct platform_device *pdev)
 	if (!sdma)
 		return -ENOMEM;
 
-	mutex_init(&sdma->channel_0_lock);
+	spin_lock_init(&sdma->channel_0_lock);
 
 	sdma->dev = &pdev->dev;
 
-- 
1.7.5.4

[PATCH Rebase 1/1] dma: imx-sdma: make channel0 operations atomic

[Richard Zhao]

device_prep_dma_cyclic may be call in audio trigger function which is
atomic context, so we make it atomic too.

 - change channel0 lock to spinlock.
 - Use polling to wait for channel0 finish running.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
 drivers/dma/imx-sdma.c |   57 ++++++++++++++++++++++++++---------------------
 1 files changed, 31 insertions(+), 26 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index d3e38e2..79aa749 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -24,7 +24,7 @@
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
-#include <linux/wait.h>
+#include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/semaphore.h>
 #include <linux/spinlock.h>
@@ -323,7 +323,7 @@ struct sdma_engine {
 	dma_addr_t			context_phys;
 	struct dma_device		dma_device;
 	struct clk			*clk;
-	struct mutex			channel_0_lock;
+	spinlock_t			channel_0_lock;
 	struct sdma_script_start_addrs	*script_addrs;
 };
 
@@ -401,19 +401,27 @@ static void sdma_enable_channel(struct sdma_engine *sdma, int channel)
 }
 
 /*
- * sdma_run_channel - run a channel and wait till it's done
+ * sdma_run_channel0 - run a channel and wait till it's done
  */
-static int sdma_run_channel(struct sdma_channel *sdmac)
+static int sdma_run_channel0(struct sdma_engine *sdma)
 {
-	struct sdma_engine *sdma = sdmac->sdma;
-	int channel = sdmac->channel;
 	int ret;
+	unsigned long timeout = 500;
 
-	init_completion(&sdmac->done);
+	sdma_enable_channel(sdma, 0);
 
-	sdma_enable_channel(sdma, channel);
+	while (!(ret = readl_relaxed(sdma->regs + SDMA_H_INTR) & 1)) {
+		if (timeout-- <= 0)
+			break;
+		udelay(1);
+	}
 
-	ret = wait_for_completion_timeout(&sdmac->done, HZ);
+	if (ret) {
+		/* Clear the interrupt status */
+		writel_relaxed(ret, sdma->regs + SDMA_H_INTR);
+	} else {
+		dev_err(sdma->dev, "Timeout waiting for CH0 ready\n");
+	}
 
 	return ret ? 0 : -ETIMEDOUT;
 }
@@ -425,17 +433,17 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
 	void *buf_virt;
 	dma_addr_t buf_phys;
 	int ret;
-
-	mutex_lock(&sdma->channel_0_lock);
+	unsigned long flags;
 
 	buf_virt = dma_alloc_coherent(NULL,
 			size,
 			&buf_phys, GFP_KERNEL);
 	if (!buf_virt) {
-		ret = -ENOMEM;
-		goto err_out;
+		return -ENOMEM;
 	}
 
+	spin_lock_irqsave(&sdma->channel_0_lock, flags);
+
 	bd0->mode.command = C0_SETPM;
 	bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD;
 	bd0->mode.count = size / 2;
@@ -444,12 +452,11 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
 
 	memcpy(buf_virt, buf, size);
 
-	ret = sdma_run_channel(&sdma->channel[0]);
+	ret = sdma_run_channel0(sdma);
 
-	dma_free_coherent(NULL, size, buf_virt, buf_phys);
+	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
-err_out:
-	mutex_unlock(&sdma->channel_0_lock);
+	dma_free_coherent(NULL, size, buf_virt, buf_phys);
 
 	return ret;
 }
@@ -538,10 +545,6 @@ static void mxc_sdma_handle_channel(struct sdma_channel *sdmac)
 {
 	complete(&sdmac->done);
 
-	/* not interested in channel 0 interrupts */
-	if (sdmac->channel == 0)
-		return;
-
 	if (sdmac->flags & IMX_DMA_SG_LOOP)
 		sdma_handle_channel_loop(sdmac);
 	else
@@ -554,6 +557,8 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id)
 	unsigned long stat;
 
 	stat = readl_relaxed(sdma->regs + SDMA_H_INTR);
+	/* not interested in channel 0 interrupts */
+	stat &= ~1;
 	writel_relaxed(stat, sdma->regs + SDMA_H_INTR);
 
 	while (stat) {
@@ -659,6 +664,7 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	struct sdma_context_data *context = sdma->context;
 	struct sdma_buffer_descriptor *bd0 = sdma->channel[0].bd;
 	int ret;
+	unsigned long flags;
 
 	if (sdmac->direction == DMA_DEV_TO_MEM) {
 		load_address = sdmac->pc_from_device;
@@ -676,7 +682,7 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", (u32)sdmac->event_mask[0]);
 	dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", (u32)sdmac->event_mask[1]);
 
-	mutex_lock(&sdma->channel_0_lock);
+	spin_lock_irqsave(&sdma->channel_0_lock, flags);
 
 	memset(context, 0, sizeof(*context));
 	context->channel_state.pc = load_address;
@@ -695,10 +701,9 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	bd0->mode.count = sizeof(*context) / 4;
 	bd0->buffer_addr = sdma->context_phys;
 	bd0->ext_buffer_addr = 2048 + (sizeof(*context) / 4) * channel;
+	ret = sdma_run_channel0(sdma);
 
-	ret = sdma_run_channel(&sdma->channel[0]);
-
-	mutex_unlock(&sdma->channel_0_lock);
+	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
 	return ret;
 }
@@ -1297,7 +1302,7 @@ static int __init sdma_probe(struct platform_device *pdev)
 	if (!sdma)
 		return -ENOMEM;
 
-	mutex_init(&sdma->channel_0_lock);
+	spin_lock_init(&sdma->channel_0_lock);
 
 	sdma->dev = &pdev->dev;
 
-- 
1.7.5.4

Re: [alsa-devel] [PATCH Rebase 1/1] dma: imx-sdma: make channel0 operations atomic

[Vinod Koul]

On Fri, 2012-05-11 at 15:14 +0800, Richard Zhao wrote:
> device_prep_dma_cyclic may be call in audio trigger function which is
> atomic context, so we make it atomic too.
> 
>  - change channel0 lock to spinlock.
>  - Use polling to wait for channel0 finish running.
> 
> Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Thanks, Applied to slave-dma -next.

-- 
~Vinod

[alsa-devel] [PATCH Rebase 1/1] dma: imx-sdma: make channel0 operations atomic

[Vinod Koul]

On Fri, 2012-05-11 at 15:14 +0800, Richard Zhao wrote:
> device_prep_dma_cyclic may be call in audio trigger function which is
> atomic context, so we make it atomic too.
> 
>  - change channel0 lock to spinlock.
>  - Use polling to wait for channel0 finish running.
> 
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Thanks, Applied to slave-dma -next.

-- 
~Vinod

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Linus Walleij]

On Fri, May 11, 2012 at 7:32 AM, Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:

> pinctrl-mergebase-20120418 is not enough for me.  I need mxs and dummy
> states support.  So if your devel branch will never be rebased, we can
> simply ask Arnd and Olof to get that as the dependent branch?

Hm, yes the devel branch is getting real stable now, so I will only add things
on top.

Basically the for-next branch is supposed to be even more stable,
but right now it's a copy of devel.

ARM SoC guys: how do you want the pinctrl deps? I can make
a tag today if that is preferred.

Also: short-cut to another subject: how have you other guys managed
this? By e.g.:

git fetch <pinctrl tree>

git checkout -b my-pinwork v3.4-rc4
git merge pinctrl-tag
(develop develop)

Or:

git checkout -b my-pinwork pinctrl-tag

?

I was a bit uncertain on how to do this for the pending Ux500
stuff so better ask. I merged it for now but maybe it's better if
I just base the whole pullrequest on top of a stable pinctrl
branch?

Yours,
Linus Walleij

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Linus Walleij]

On Fri, May 11, 2012 at 7:32 AM, Shawn Guo <shawn.guo@linaro.org> wrote:

> pinctrl-mergebase-20120418 is not enough for me. ?I need mxs and dummy
> states support. ?So if your devel branch will never be rebased, we can
> simply ask Arnd and Olof to get that as the dependent branch?

Hm, yes the devel branch is getting real stable now, so I will only add things
on top.

Basically the for-next branch is supposed to be even more stable,
but right now it's a copy of devel.

ARM SoC guys: how do you want the pinctrl deps? I can make
a tag today if that is preferred.

Also: short-cut to another subject: how have you other guys managed
this? By e.g.:

git fetch <pinctrl tree>

git checkout -b my-pinwork v3.4-rc4
git merge pinctrl-tag
(develop develop)

Or:

git checkout -b my-pinwork pinctrl-tag

?

I was a bit uncertain on how to do this for the pending Ux500
stuff so better ask. I merged it for now but maybe it's better if
I just base the whole pullrequest on top of a stable pinctrl
branch?

Yours,
Linus Walleij

Re: [PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Arnd Bergmann]

On Friday 11 May 2012, Linus Walleij wrote:
> On Fri, May 11, 2012 at 7:32 AM, Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> 
> > pinctrl-mergebase-20120418 is not enough for me.  I need mxs and dummy
> > states support.  So if your devel branch will never be rebased, we can
> > simply ask Arnd and Olof to get that as the dependent branch?
> 
> Hm, yes the devel branch is getting real stable now, so I will only add things
> on top.
> 
> Basically the for-next branch is supposed to be even more stable,
> but right now it's a copy of devel.
> 
> ARM SoC guys: how do you want the pinctrl deps? I can make
> a tag today if that is preferred.

No need for a signed tag, since we're not going to submit you changes
upstream. Knowing that we can pull in the for-next branch is good enough,
so we'll do that for anything that needs it.

> Also: short-cut to another subject: how have you other guys managed
> this? By e.g.:
> 
> git fetch <pinctrl tree>
> 
> git checkout -b my-pinwork v3.4-rc4
> git merge pinctrl-tag
> (develop develop)
> 
> Or:
> 
> git checkout -b my-pinwork pinctrl-tag
> 
> ?
> 
> I was a bit uncertain on how to do this for the pending Ux500
> stuff so better ask. I merged it for now but maybe it's better if
> I just base the whole pullrequest on top of a stable pinctrl
> branch?

No strong preference on my side. I've seen both ways getting done.
In arm-soc we try to do a 'git pull --log --no-ff' for all changes
that are being pulled into one of the main next/* branches, just
like torvalds does when he pulls in branches from maintainers.

	Arnd

[PATCH V2 03/11] ASoC: imx-audmux: add pinctrl support

[Arnd Bergmann]

On Friday 11 May 2012, Linus Walleij wrote:
> On Fri, May 11, 2012 at 7:32 AM, Shawn Guo <shawn.guo@linaro.org> wrote:
> 
> > pinctrl-mergebase-20120418 is not enough for me.  I need mxs and dummy
> > states support.  So if your devel branch will never be rebased, we can
> > simply ask Arnd and Olof to get that as the dependent branch?
> 
> Hm, yes the devel branch is getting real stable now, so I will only add things
> on top.
> 
> Basically the for-next branch is supposed to be even more stable,
> but right now it's a copy of devel.
> 
> ARM SoC guys: how do you want the pinctrl deps? I can make
> a tag today if that is preferred.

No need for a signed tag, since we're not going to submit you changes
upstream. Knowing that we can pull in the for-next branch is good enough,
so we'll do that for anything that needs it.

> Also: short-cut to another subject: how have you other guys managed
> this? By e.g.:
> 
> git fetch <pinctrl tree>
> 
> git checkout -b my-pinwork v3.4-rc4
> git merge pinctrl-tag
> (develop develop)
> 
> Or:
> 
> git checkout -b my-pinwork pinctrl-tag
> 
> ?
> 
> I was a bit uncertain on how to do this for the pending Ux500
> stuff so better ask. I merged it for now but maybe it's better if
> I just base the whole pullrequest on top of a stable pinctrl
> branch?

No strong preference on my side. I've seen both ways getting done.
In arm-soc we try to do a 'git pull --log --no-ff' for all changes
that are being pulled into one of the main next/* branches, just
like torvalds does when he pulls in branches from maintainers.

	Arnd

Re: [PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support

[Richard Zhao]

Hi Mark,

>   ASoC: imx-audmux: add pinctrl support
>   ASoC: fsl_ssi: convert to use devm_clk_get
Linus has sent out pull request for pinctrl. So is that ok for you
to pick up the above two patch?

Thanks
Richard

[PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support

[Richard Zhao]

Hi Mark,

>   ASoC: imx-audmux: add pinctrl support
>   ASoC: fsl_ssi: convert to use devm_clk_get
Linus has sent out pull request for pinctrl. So is that ok for you
to pick up the above two patch?

Thanks
Richard

Re: [PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 1314 bytes --]

On Mon, May 21, 2012 at 08:59:31PM +0800, Richard Zhao wrote:

> >   ASoC: imx-audmux: add pinctrl support
> >   ASoC: fsl_ssi: convert to use devm_clk_get

> Linus has sent out pull request for pinctrl. So is that ok for you
> to pick up the above two patch?

No, apart from anything else the second patch depends on clkdev which is
nothing to do with pinctrl!  For the first patch it wasn't clear if the
changes in pinctrl were the actual dependencies or if there were more
things needed from the ARM tree, and in any case until those patches are
actually in the ASoC tree we'll break the build if they get applied.

Guys, you really need to think about how you're organising what you're
doing more.  You need to split your work out into focused lines of
development rather than just having a single branch.  

This patch series contains a whole bunch of different changes (the
devm_clk_get() change is as far as I can tell completely unrelated to
the rest for example) with unclear dependencies on multiple external
trees.  You should be splitting unrelated changes out, trying to
minimise interdependencies, and clearly identifying the dependencies
that are there we can get things applied in a timely fashion.

Please resend these patches *after* their dependencies are in mainline.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support

[Mark Brown]

On Mon, May 21, 2012 at 08:59:31PM +0800, Richard Zhao wrote:

> >   ASoC: imx-audmux: add pinctrl support
> >   ASoC: fsl_ssi: convert to use devm_clk_get

> Linus has sent out pull request for pinctrl. So is that ok for you
> to pick up the above two patch?

No, apart from anything else the second patch depends on clkdev which is
nothing to do with pinctrl!  For the first patch it wasn't clear if the
changes in pinctrl were the actual dependencies or if there were more
things needed from the ARM tree, and in any case until those patches are
actually in the ASoC tree we'll break the build if they get applied.

Guys, you really need to think about how you're organising what you're
doing more.  You need to split your work out into focused lines of
development rather than just having a single branch.  

This patch series contains a whole bunch of different changes (the
devm_clk_get() change is as far as I can tell completely unrelated to
the rest for example) with unclear dependencies on multiple external
trees.  You should be splitting unrelated changes out, trying to
minimise interdependencies, and clearly identifying the dependencies
that are there we can get things applied in a timely fashion.

Please resend these patches *after* their dependencies are in mainline.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120521/5be3e67e/attachment.sig>

Re: [PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support

[Richard Zhao]

On Mon, May 21, 2012 at 03:45:44PM +0100, Mark Brown wrote:
> On Mon, May 21, 2012 at 08:59:31PM +0800, Richard Zhao wrote:
> 
> > >   ASoC: imx-audmux: add pinctrl support
> > >   ASoC: fsl_ssi: convert to use devm_clk_get
> 
> > Linus has sent out pull request for pinctrl. So is that ok for you
> > to pick up the above two patch?
> 
> No, apart from anything else the second patch depends on clkdev which is
> nothing to do with pinctrl!
All right, It's my fault to mix a clean up patch. It may hold until the
merge window is closed.
>  For the first patch it wasn't clear if the
> changes in pinctrl were the actual dependencies or if there were more
> things needed from the ARM tree,
I remembered someone already explained the dependencies. It depends
on imx pinctrl work and dummy pinctrl enabled in ARM platform code. It
is why Shawn suggest it goes to ARM SoC.
> and in any case until those patches are
> actually in the ASoC tree we'll break the build if they get applied.
All righ, It's ok, if you think, I have to wait for one more cycle to
see the patch on mainline.
> 
> Guys, you really need to think about how you're organising what you're
> doing more.  You need to split your work out into focused lines of
> development rather than just having a single branch.  
Except the clean up patch, others are all related to enable audio. Do
you mean I supposed to split them in advance?
> 
> This patch series contains a whole bunch of different changes (the
> devm_clk_get() change is as far as I can tell completely unrelated to
> the rest for example) with unclear dependencies on multiple external
> trees.  You should be splitting unrelated changes out, trying to
> minimise interdependencies, and clearly identifying the dependencies
> that are there we can get things applied in a timely fashion.
hmm.. I should write more about dependencies in commit message.
> 
> Please resend these patches *after* their dependencies are in mainline.
OK.

Thanks
Richard

[PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support

[Richard Zhao]

On Mon, May 21, 2012 at 03:45:44PM +0100, Mark Brown wrote:
> On Mon, May 21, 2012 at 08:59:31PM +0800, Richard Zhao wrote:
> 
> > >   ASoC: imx-audmux: add pinctrl support
> > >   ASoC: fsl_ssi: convert to use devm_clk_get
> 
> > Linus has sent out pull request for pinctrl. So is that ok for you
> > to pick up the above two patch?
> 
> No, apart from anything else the second patch depends on clkdev which is
> nothing to do with pinctrl!
All right, It's my fault to mix a clean up patch. It may hold until the
merge window is closed.
>  For the first patch it wasn't clear if the
> changes in pinctrl were the actual dependencies or if there were more
> things needed from the ARM tree,
I remembered someone already explained the dependencies. It depends
on imx pinctrl work and dummy pinctrl enabled in ARM platform code. It
is why Shawn suggest it goes to ARM SoC.
> and in any case until those patches are
> actually in the ASoC tree we'll break the build if they get applied.
All righ, It's ok, if you think, I have to wait for one more cycle to
see the patch on mainline.
> 
> Guys, you really need to think about how you're organising what you're
> doing more.  You need to split your work out into focused lines of
> development rather than just having a single branch.  
Except the clean up patch, others are all related to enable audio. Do
you mean I supposed to split them in advance?
> 
> This patch series contains a whole bunch of different changes (the
> devm_clk_get() change is as far as I can tell completely unrelated to
> the rest for example) with unclear dependencies on multiple external
> trees.  You should be splitting unrelated changes out, trying to
> minimise interdependencies, and clearly identifying the dependencies
> that are there we can get things applied in a timely fashion.
hmm.. I should write more about dependencies in commit message.
> 
> Please resend these patches *after* their dependencies are in mainline.
OK.

Thanks
Richard

Re: [PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 1753 bytes --]

On Tue, May 22, 2012 at 09:39:21AM +0800, Richard Zhao wrote:
> On Mon, May 21, 2012 at 03:45:44PM +0100, Mark Brown wrote:

> >  For the first patch it wasn't clear if the
> > changes in pinctrl were the actual dependencies or if there were more
> > things needed from the ARM tree,

> I remembered someone already explained the dependencies. It depends
> on imx pinctrl work and dummy pinctrl enabled in ARM platform code. It
> is why Shawn suggest it goes to ARM SoC.

There was mention of some changes but only a vauge description of them,
I've no idea where they are or anything, initially people had mentioned
an already cross-merged point in Linus' tree but apparently that wasn't
sufficient due to these arch specific bits and I don't know where those
are.

We should really have got this resolved in -next...

> > Guys, you really need to think about how you're organising what you're
> > doing more.  You need to split your work out into focused lines of
> > development rather than just having a single branch.  

> Except the clean up patch, others are all related to enable audio. Do
> you mean I supposed to split them in advance?

Well, a lot of the time there's no actual dependency (eg, you add a
driver and add registration of that device so there's no need for them
to go in together since both are perfectly fine without the other) then
it is best to merge things separately.  If there are dependencies then
that needs to be handled differently but it needs communication and
ideally the dependencies would be on focused things that can just be
pulled in.  

In the case of things like the devm_clk_get() cleanup if there's any
complexity at all then it's usually best just to punt for a release.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH V2 00/11] enable imx6q_sabrelite sgtl5000 audio support

[Mark Brown]

On Tue, May 22, 2012 at 09:39:21AM +0800, Richard Zhao wrote:
> On Mon, May 21, 2012 at 03:45:44PM +0100, Mark Brown wrote:

> >  For the first patch it wasn't clear if the
> > changes in pinctrl were the actual dependencies or if there were more
> > things needed from the ARM tree,

> I remembered someone already explained the dependencies. It depends
> on imx pinctrl work and dummy pinctrl enabled in ARM platform code. It
> is why Shawn suggest it goes to ARM SoC.

There was mention of some changes but only a vauge description of them,
I've no idea where they are or anything, initially people had mentioned
an already cross-merged point in Linus' tree but apparently that wasn't
sufficient due to these arch specific bits and I don't know where those
are.

We should really have got this resolved in -next...

> > Guys, you really need to think about how you're organising what you're
> > doing more.  You need to split your work out into focused lines of
> > development rather than just having a single branch.  

> Except the clean up patch, others are all related to enable audio. Do
> you mean I supposed to split them in advance?

Well, a lot of the time there's no actual dependency (eg, you add a
driver and add registration of that device so there's no need for them
to go in together since both are perfectly fine without the other) then
it is best to merge things separately.  If there are dependencies then
that needs to be handled differently but it needs communication and
ideally the dependencies would be on focused things that can just be
pulled in.  

In the case of things like the devm_clk_get() cleanup if there's any
complexity at all then it's usually best just to punt for a release.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120522/0eb08ec0/attachment.sig>