[ 00/94] 3.3.8-stable review

[ 00/94] 3.3.8-stable review

[Greg KH]

This is the start of the stable review cycle for the 3.3.8 release.
There are 95 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Tue May 29 01:02:37 UTC 2012.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.3.8-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
 Documentation/HOWTO                       |  32 +-
 Makefile                                  |  13 +-
 arch/arm/include/asm/cacheflush.h         |   2 +-
 arch/arm/kernel/traps.c                   |   4 +-
 arch/parisc/include/asm/prefetch.h        |   7 +-
 arch/parisc/kernel/entry.S                |   4 +
 arch/parisc/kernel/pacache.S              |  38 +-
 arch/powerpc/kernel/idle.c                |  14 +-
 arch/s390/mm/fault.c                      |  14 +-
 arch/sparc/Kconfig                        |   3 +
 arch/sparc/kernel/systbls_64.S            |   2 +-
 arch/tile/Kconfig                         |   1 +
 arch/tile/include/asm/bitops.h            |  12 +-
 arch/um/include/asm/pgtable.h             |  10 +-
 arch/x86/Makefile                         |   4 +
 arch/x86/boot/compressed/Makefile         |   9 +-
 arch/x86/boot/compressed/relocs.c         | 680 -------------------------
 arch/x86/kernel/cpu/mcheck/mce-severity.c |  16 +-
 arch/x86/kernel/cpu/mcheck/mce.c          |   8 +
 arch/x86/kernel/cpu/perf_event_amd.c      |  11 +-
 arch/x86/pci/xen.c                        |   4 +
 arch/x86/tools/.gitignore                 |   1 +
 arch/x86/tools/Makefile                   |   4 +
 arch/x86/tools/relocs.c                   | 818 ++++++++++++++++++++++++++++++
 block/genhd.c                             |  10 +-
 drivers/ata/ahci.c                        |   2 +
 drivers/ata/libata-transport.c            |   1 +
 drivers/gpio/gpio-mpc8xxx.c               |   3 +-
 drivers/gpu/drm/gma500/psb_device.c       |   6 +-
 drivers/gpu/drm/i915/i915_irq.c           |   9 +-
 drivers/gpu/drm/i915/i915_reg.h           |  15 +
 drivers/gpu/drm/i915/intel_display.c      |  19 +-
 drivers/gpu/drm/nouveau/nouveau_bo.c      |   2 +-
 drivers/hid/hid-logitech-dj.c             |   5 +-
 drivers/hid/hid-wiimote-core.c            |  16 +-
 drivers/hid/usbhid/hid-core.c             |  61 ++-
 drivers/i2c/busses/i2c-davinci.c          |   2 +-
 drivers/i2c/busses/i2c-tegra.c            |  13 +-
 drivers/infiniband/core/umem.c            |   2 +-
 drivers/infiniband/hw/cxgb4/cm.c          |  13 +-
 drivers/iommu/dmar.c                      |   4 +-
 drivers/iommu/intel-iommu.c               |  17 +-
 drivers/isdn/gigaset/capi.c               |  22 +-
 drivers/md/md.c                           |   2 +-
 drivers/media/dvb/siano/smsusb.c          |   2 +
 drivers/media/video/uvc/uvc_v4l2.c        |   2 +-
 drivers/mmc/core/cd-gpio.c                |   3 +
 drivers/mmc/core/sdio.c                   |   2 +-
 drivers/mmc/core/sdio_irq.c               |  11 +-
 drivers/mmc/host/omap_hsmmc.c             |   2 +-
 drivers/mtd/sm_ftl.c                      |   2 +-
 drivers/net/wireless/b43legacy/main.c     |   2 -
 drivers/net/wireless/ipw2x00/ipw2200.c    |  21 +-
 drivers/net/wireless/iwlwifi/iwl-6000.c   |   4 +-
 drivers/net/wireless/rtlwifi/pci.c        |  17 +-
 drivers/net/wireless/rtlwifi/usb.c        |  12 +-
 drivers/regulator/core.c                  |   2 +
 drivers/rtc/rtc-pl031.c                   |  18 +
 drivers/scsi/hpsa.c                       |  34 +-
 drivers/scsi/isci/init.c                  |   2 +-
 drivers/scsi/mpt2sas/mpt2sas_base.c       |   6 +-
 drivers/spi/spi-fsl-spi.c                 |   2 +-
 drivers/staging/comedi/comedi_fops.c      |   2 +-
 drivers/tty/serial/8250/8250_pci.c        |  18 +
 drivers/tty/serial/mxs-auart.c            |   2 +
 drivers/tty/serial/serial_core.c          |   1 +
 drivers/usb/class/cdc-wdm.c               |   4 +-
 drivers/usb/core/devio.c                  |  33 +-
 drivers/usb/core/hub.c                    |   4 +
 drivers/usb/core/quirks.c                 |   3 +
 drivers/usb/core/urb.c                    |  21 +
 drivers/usb/gadget/fsl_udc_core.c         |   2 +
 drivers/usb/host/ehci-pci.c               |   4 +-
 drivers/usb/host/ohci-at91.c              |  11 +-
 drivers/usb/host/pci-quirks.c             |  32 +-
 drivers/usb/host/xhci-mem.c               |  27 +
 drivers/usb/host/xhci-pci.c               |   1 +
 drivers/usb/host/xhci-ring.c              |  21 +-
 drivers/usb/host/xhci.h                   |   1 +
 drivers/usb/misc/usbtest.c                |  17 +-
 drivers/usb/serial/ftdi_sio.c             |   1 +
 drivers/usb/serial/ftdi_sio_ids.h         |   8 +
 drivers/usb/serial/ti_usb_3410_5052.c     |   6 +-
 drivers/usb/serial/ti_usb_3410_5052.h     |   1 +
 drivers/usb/storage/unusual_devs.h        |   7 +
 drivers/video/udlfb.c                     | 146 +++---
 drivers/xen/events.c                      |   5 +-
 fs/aio.c                                  |  30 +-
 fs/bio.c                                  |   7 +-
 fs/block_dev.c                            |   6 +-
 fs/buffer.c                               |   4 +-
 include/linux/fs.h                        |   1 +
 include/linux/genhd.h                     |   6 -
 include/linux/mmc/host.h                  |   2 +
 include/linux/usb.h                       |   3 +
 include/video/udlfb.h                     |   1 +
 include/xen/events.h                      |   3 +
 init/main.c                               |   7 +-
 kernel/workqueue.c                        |   9 +-
 mm/mempolicy.c                            |  41 +-
 mm/swapfile.c                             |   2 +-
 net/wireless/reg.c                        |  10 +
 scripts/Makefile                          |   2 +
 security/selinux/selinuxfs.c              |   1 +
 tools/usb/ffs-test.c                      |   2 +-
 105 files changed, 1554 insertions(+), 1040 deletions(-)

[ 01/94] tilegx: enable SYSCALL_WRAPPERS support

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Metcalf <cmetcalf@tilera.com>

commit e6d9668e119af44ae5bcd5f1197174531458afe3 upstream.

Some discussion with the glibc mailing lists revealed that this was
necessary for 64-bit platforms with MIPS-like sign-extension rules
for 32-bit values.  The original symptom was that passing (uid_t)-1 to
setreuid() was failing in programs linked -pthread because of the "setxid"
mechanism for passing setxid-type function arguments to the syscall code.
SYSCALL_WRAPPERS handles ensuring that all syscall arguments end up with
proper sign-extension and is thus the appropriate fix for this problem.

On other platforms (s390, powerpc, sparc64, and mips) this was fixed
in 2.6.28.6.  The general issue is tracked as CVE-2009-0029.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/tile/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -11,6 +11,7 @@ config TILE
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_IRQ_SHOW
+	select HAVE_SYSCALL_WRAPPERS if TILEGX
 	select SYS_HYPERVISOR
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if !M386
 

[ 02/94] bio allocation failure due to bio_get_nr_vecs()

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>

commit f908ee9463b09ddd05e1c1a0111132212dc05fac upstream.

The number of bio_get_nr_vecs() is passed down via bio_alloc() to
bvec_alloc_bs(), which fails the bio allocation if
nr_iovecs > BIO_MAX_PAGES. For the underlying caller this causes an
unexpected bio allocation failure.
Limiting to queue_max_segments() is not sufficient, as max_segments
also might be very large.

bvec_alloc_bs(gfp_mask, nr_iovecs, ) => NULL when nr_iovecs  > BIO_MAX_PAGES
bio_alloc_bioset(gfp_mask, nr_iovecs, ...)
bio_alloc(GFP_NOIO, nvecs)
xfs_alloc_ioend_bio()

Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/bio.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/fs/bio.c
+++ b/fs/bio.c
@@ -505,9 +505,14 @@ EXPORT_SYMBOL(bio_clone);
 int bio_get_nr_vecs(struct block_device *bdev)
 {
 	struct request_queue *q = bdev_get_queue(bdev);
-	return min_t(unsigned,
+	int nr_pages;
+
+	nr_pages = min_t(unsigned,
 		     queue_max_segments(q),
 		     queue_max_sectors(q) / (PAGE_SIZE >> 9) + 1);
+
+	return min_t(unsigned, nr_pages, BIO_MAX_PAGES);
+
 }
 EXPORT_SYMBOL(bio_get_nr_vecs);
 

[ 03/94] block: fix buffer overflow when printing partition UUIDs

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 05c69d298c96703741cac9a5cbbf6c53bd55a6e2 upstream.

6d1d8050b4bc8 "block, partition: add partition_meta_info to hd_struct"
added part_unpack_uuid() which assumes that the passed in buffer has
enough space for sprintfing "%pU" - 37 characters including '\0'.

Unfortunately, b5af921ec0233 "init: add support for root devices
specified by partition UUID" supplied 33 bytes buffer to the function
leading to the following panic with stackprotector enabled.

  Kernel panic - not syncing: stack-protector: Kernel stack corrupted in: ffffffff81b14c7e

  [<ffffffff815e226b>] panic+0xba/0x1c6
  [<ffffffff81b14c7e>] ? printk_all_partitions+0x259/0x26xb
  [<ffffffff810566bb>] __stack_chk_fail+0x1b/0x20
  [<ffffffff81b15c7e>] printk_all_paritions+0x259/0x26xb
  [<ffffffff81aedfe0>] mount_block_root+0x1bc/0x27f
  [<ffffffff81aee0fa>] mount_root+0x57/0x5b
  [<ffffffff81aee23b>] prepare_namespace+0x13d/0x176
  [<ffffffff8107eec0>] ? release_tgcred.isra.4+0x330/0x30
  [<ffffffff81aedd60>] kernel_init+0x155/0x15a
  [<ffffffff81087b97>] ? schedule_tail+0x27/0xb0
  [<ffffffff815f4d24>] kernel_thread_helper+0x5/0x10
  [<ffffffff81aedc0b>] ? start_kernel+0x3c5/0x3c5
  [<ffffffff815f4d20>] ? gs_change+0x13/0x13

Increase the buffer size, remove the dangerous part_unpack_uuid() and
use snprintf() directly from printk_all_partitions().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Szymon Gruszczynski <sz.gruszczynski@googlemail.com>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/genhd.c         |   10 ++++++----
 include/linux/genhd.h |    6 ------
 2 files changed, 6 insertions(+), 10 deletions(-)

--- a/block/genhd.c
+++ b/block/genhd.c
@@ -743,7 +743,7 @@ void __init printk_all_partitions(void)
 		struct hd_struct *part;
 		char name_buf[BDEVNAME_SIZE];
 		char devt_buf[BDEVT_SIZE];
-		u8 uuid[PARTITION_META_INFO_UUIDLTH * 2 + 1];
+		char uuid_buf[PARTITION_META_INFO_UUIDLTH * 2 + 5];
 
 		/*
 		 * Don't show empty devices or things that have been
@@ -762,14 +762,16 @@ void __init printk_all_partitions(void)
 		while ((part = disk_part_iter_next(&piter))) {
 			bool is_part0 = part == &disk->part0;
 
-			uuid[0] = 0;
+			uuid_buf[0] = '\0';
 			if (part->info)
-				part_unpack_uuid(part->info->uuid, uuid);
+				snprintf(uuid_buf, sizeof(uuid_buf), "%pU",
+					 part->info->uuid);
 
 			printk("%s%s %10llu %s %s", is_part0 ? "" : "  ",
 			       bdevt_str(part_devt(part), devt_buf),
 			       (unsigned long long)part->nr_sects >> 1,
-			       disk_name(disk, part->partno, name_buf), uuid);
+			       disk_name(disk, part->partno, name_buf),
+			       uuid_buf);
 			if (is_part0) {
 				if (disk->driverfs_dev != NULL &&
 				    disk->driverfs_dev->driver != NULL)
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -222,12 +222,6 @@ static inline void part_pack_uuid(const
 	}
 }
 
-static inline char *part_unpack_uuid(const u8 *uuid, char *out)
-{
-	sprintf(out, "%pU", uuid);
-	return out;
-}
-
 static inline int disk_max_parts(struct gendisk *disk)
 {
 	if (disk->flags & GENHD_FL_EXT_DEVT)

[ 04/94] block: dont mark buffers beyond end of disk as mapped

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Moyer <jmoyer@redhat.com>

commit 080399aaaf3531f5b8761ec0ac30ff98891e8686 upstream.

Hi,

We have a bug report open where a squashfs image mounted on ppc64 would
exhibit errors due to trying to read beyond the end of the disk.  It can
easily be reproduced by doing the following:

[root@ibm-p750e-02-lp3 ~]# ls -l install.img
-rw-r--r-- 1 root root 142032896 Apr 30 16:46 install.img
[root@ibm-p750e-02-lp3 ~]# mount -o loop ./install.img /mnt/test
[root@ibm-p750e-02-lp3 ~]# dd if=/dev/loop0 of=/dev/null
dd: reading `/dev/loop0': Input/output error
277376+0 records in
277376+0 records out
142016512 bytes (142 MB) copied, 0.9465 s, 150 MB/s

In dmesg, you'll find the following:

squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   43.106012] attempt to access beyond end of device
[   43.106029] loop0: rw=0, want=277410, limit=277408
[   43.106039] Buffer I/O error on device loop0, logical block 138704
[   43.106053] attempt to access beyond end of device
[   43.106057] loop0: rw=0, want=277412, limit=277408
[   43.106061] Buffer I/O error on device loop0, logical block 138705
[   43.106066] attempt to access beyond end of device
[   43.106070] loop0: rw=0, want=277414, limit=277408
[   43.106073] Buffer I/O error on device loop0, logical block 138706
[   43.106078] attempt to access beyond end of device
[   43.106081] loop0: rw=0, want=277416, limit=277408
[   43.106085] Buffer I/O error on device loop0, logical block 138707
[   43.106089] attempt to access beyond end of device
[   43.106093] loop0: rw=0, want=277418, limit=277408
[   43.106096] Buffer I/O error on device loop0, logical block 138708
[   43.106101] attempt to access beyond end of device
[   43.106104] loop0: rw=0, want=277420, limit=277408
[   43.106108] Buffer I/O error on device loop0, logical block 138709
[   43.106112] attempt to access beyond end of device
[   43.106116] loop0: rw=0, want=277422, limit=277408
[   43.106120] Buffer I/O error on device loop0, logical block 138710
[   43.106124] attempt to access beyond end of device
[   43.106128] loop0: rw=0, want=277424, limit=277408
[   43.106131] Buffer I/O error on device loop0, logical block 138711
[   43.106135] attempt to access beyond end of device
[   43.106139] loop0: rw=0, want=277426, limit=277408
[   43.106143] Buffer I/O error on device loop0, logical block 138712
[   43.106147] attempt to access beyond end of device
[   43.106151] loop0: rw=0, want=277428, limit=277408
[   43.106154] Buffer I/O error on device loop0, logical block 138713
[   43.106158] attempt to access beyond end of device
[   43.106162] loop0: rw=0, want=277430, limit=277408
[   43.106166] attempt to access beyond end of device
[   43.106169] loop0: rw=0, want=277432, limit=277408
...
[   43.106307] attempt to access beyond end of device
[   43.106311] loop0: rw=0, want=277470, limit=2774

Squashfs manages to read in the end block(s) of the disk during the
mount operation.  Then, when dd reads the block device, it leads to
block_read_full_page being called with buffers that are beyond end of
disk, but are marked as mapped.  Thus, it would end up submitting read
I/O against them, resulting in the errors mentioned above.  I fixed the
problem by modifying init_page_buffers to only set the buffer mapped if
it fell inside of i_size.

Cheers,
Jeff

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Nick Piggin <npiggin@kernel.dk>

--

Changes from v1->v2: re-used max_block, as suggested by Nick Piggin.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/block_dev.c     |    6 +++---
 fs/buffer.c        |    4 +++-
 include/linux/fs.h |    1 +
 3 files changed, 7 insertions(+), 4 deletions(-)

--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -69,7 +69,7 @@ static void bdev_inode_switch_bdi(struct
 	spin_unlock(&dst->wb.list_lock);
 }
 
-static sector_t max_block(struct block_device *bdev)
+sector_t blkdev_max_block(struct block_device *bdev)
 {
 	sector_t retval = ~((sector_t)0);
 	loff_t sz = i_size_read(bdev->bd_inode);
@@ -162,7 +162,7 @@ static int
 blkdev_get_block(struct inode *inode, sector_t iblock,
 		struct buffer_head *bh, int create)
 {
-	if (iblock >= max_block(I_BDEV(inode))) {
+	if (iblock >= blkdev_max_block(I_BDEV(inode))) {
 		if (create)
 			return -EIO;
 
@@ -184,7 +184,7 @@ static int
 blkdev_get_blocks(struct inode *inode, sector_t iblock,
 		struct buffer_head *bh, int create)
 {
-	sector_t end_block = max_block(I_BDEV(inode));
+	sector_t end_block = blkdev_max_block(I_BDEV(inode));
 	unsigned long max_blocks = bh->b_size >> inode->i_blkbits;
 
 	if ((iblock + max_blocks) > end_block) {
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -921,6 +921,7 @@ init_page_buffers(struct page *page, str
 	struct buffer_head *head = page_buffers(page);
 	struct buffer_head *bh = head;
 	int uptodate = PageUptodate(page);
+	sector_t end_block = blkdev_max_block(I_BDEV(bdev->bd_inode));
 
 	do {
 		if (!buffer_mapped(bh)) {
@@ -929,7 +930,8 @@ init_page_buffers(struct page *page, str
 			bh->b_blocknr = block;
 			if (uptodate)
 				set_buffer_uptodate(bh);
-			set_buffer_mapped(bh);
+			if (block < end_block)
+				set_buffer_mapped(bh);
 		}
 		block++;
 		bh = bh->b_this_page;
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2058,6 +2058,7 @@ extern void unregister_blkdev(unsigned i
 extern struct block_device *bdget(dev_t);
 extern struct block_device *bdgrab(struct block_device *bdev);
 extern void bd_set_size(struct block_device *, loff_t size);
+extern sector_t blkdev_max_block(struct block_device *bdev);
 extern void bd_forget(struct inode *inode);
 extern void bdput(struct block_device *);
 extern void invalidate_bdev(struct block_device *);

[ 05/94] PARISC: fix PA1.1 oops on boot

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Bottomley <JBottomley@Parallels.com>

commit 5e185581d7c46ddd33cd9c01106d1fc86efb9376 upstream.

All PA1.1 systems have been oopsing on boot since

commit f311847c2fcebd81912e2f0caf8a461dec28db41
Author: James Bottomley <James.Bottomley@HansenPartnership.com>
Date:   Wed Dec 22 10:22:11 2010 -0600

    parisc: flush pages through tmpalias space

because a PA2.0 instruction was accidentally introduced into the PA1.1 TLB
insertion interruption path when it was consolidated with the do_alias macro.
Fix the do_alias macro only to use PA2.0 instructions if compiled for 64 bit.

Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/parisc/kernel/entry.S |    4 ++++
 1 file changed, 4 insertions(+)

--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -581,7 +581,11 @@
 	 */
 	cmpiclr,=	0x01,\tmp,%r0
 	ldi		(_PAGE_DIRTY|_PAGE_READ|_PAGE_WRITE),\prot
+#ifdef CONFIG_64BIT
 	depd,z		\prot,8,7,\prot
+#else
+	depw,z		\prot,8,7,\prot
+#endif
 	/*
 	 * OK, it is in the temp alias region, check whether "from" or "to".
 	 * Check "subtle" note in pacache.S re: r23/r26.

[ 06/94] PARISC: fix crash in flush_icache_page_asm on PA1.1

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John David Anglin <dave.anglin@bell.net>

commit 207f583d7179f707f402c36a7bda5ca1fd03ad5b upstream.

As pointed out by serveral people, PA1.1 only has a type 26 instruction
meaning that the space register must be explicitly encoded.  Not giving an
explicit space means that the compiler uses the type 24 version which is PA2.0
only resulting in an illegal instruction crash.

This regression was caused by

    commit f311847c2fcebd81912e2f0caf8a461dec28db41
    Author: James Bottomley <James.Bottomley@HansenPartnership.com>
    Date:   Wed Dec 22 10:22:11 2010 -0600

        parisc: flush pages through tmpalias space

Reported-by: Helge Deller <deller@gmx.de>
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/parisc/kernel/pacache.S |   38 ++++++++++++++++++++------------------
 1 file changed, 20 insertions(+), 18 deletions(-)

--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -692,7 +692,7 @@ ENTRY(flush_icache_page_asm)
 
 	/* Purge any old translation */
 
-	pitlb		(%sr0,%r28)
+	pitlb		(%sr4,%r28)
 
 	ldil		L%icache_stride, %r1
 	ldw		R%icache_stride(%r1), %r1
@@ -706,27 +706,29 @@ ENTRY(flush_icache_page_asm)
 	sub		%r25, %r1, %r25
 
 
-1:      fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
+	/* fic only has the type 26 form on PA1.1, requiring an
+	 * explicit space specification, so use %sr4 */
+1:      fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
 	cmpb,COND(<<)		%r28, %r25,1b
-	fic,m		%r1(%r28)
+	fic,m		%r1(%sr4,%r28)
 
 	sync
 	bv		%r0(%r2)
-	pitlb		(%sr0,%r25)
+	pitlb		(%sr4,%r25)
 	.exit
 
 	.procend

[ 07/94] PARISC: fix panic on prefetch(NULL) on PA7300LC

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Bottomley <JBottomley@Parallels.com>

commit b3cb8674811d1851bbf1486a73d62b90c119b994 upstream.

Due to an errata, the PA7300LC generates a TLB miss interruption even on the
prefetch instruction.  This means that prefetch(NULL), which is supposed to be
a nop on linux actually generates a NULL deref fault.  Fix this by testing the
address of prefetch against NULL before doing the prefetch.

Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/parisc/include/asm/prefetch.h |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/arch/parisc/include/asm/prefetch.h
+++ b/arch/parisc/include/asm/prefetch.h
@@ -21,7 +21,12 @@
 #define ARCH_HAS_PREFETCH
 static inline void prefetch(const void *addr)
 {
-	__asm__("ldw 0(%0), %%r0" : : "r" (addr));
+	__asm__(
+#ifndef CONFIG_PA20
+		/* Need to avoid prefetch of NULL on PA7300LC */
+		"	extrw,u,= %0,31,32,%%r0\n"
+#endif
+		"	ldw 0(%0), %%r0" : : "r" (addr));
 }
 
 /* LDD is a PA2.0 addition. */

[ 08/94] isdn/gigaset: ratelimit CAPI message dumps

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tilman Schmidt <tilman@imap.cc>

commit 8e618aad5348b6e6c5a90e8d97ea643197963b20 upstream.

Introduce a global ratelimit for CAPI message dumps to protect
against possible log flood.
Drop the ratelimit for ignored messages which is now covered by the
global one.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/isdn/gigaset/capi.c |   22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -14,6 +14,7 @@
 #include "gigaset.h"
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/ratelimit.h>
 #include <linux/isdn/capilli.h>
 #include <linux/isdn/capicmd.h>
 #include <linux/isdn/capiutil.h>
@@ -223,10 +224,14 @@ get_appl(struct gigaset_capi_ctr *iif, u
 static inline void dump_cmsg(enum debuglevel level, const char *tag, _cmsg *p)
 {
 #ifdef CONFIG_GIGASET_DEBUG
+	/* dump at most 20 messages in 20 secs */
+	static DEFINE_RATELIMIT_STATE(msg_dump_ratelimit, 20 * HZ, 20);
 	_cdebbuf *cdb;
 
 	if (!(gigaset_debuglevel & level))
 		return;
+	if (!___ratelimit(&msg_dump_ratelimit, tag))
+		return;
 
 	cdb = capi_cmsg2str(p);
 	if (cdb) {
@@ -2059,12 +2064,6 @@ static void do_reset_b3_req(struct gigas
 }
 
 /*
- * dump unsupported/ignored messages at most twice per minute,
- * some apps send those very frequently
- */
-static unsigned long ignored_msg_dump_time;
-
-/*
  * unsupported CAPI message handler
  */
 static void do_unsupported(struct gigaset_capi_ctr *iif,
@@ -2073,8 +2072,7 @@ static void do_unsupported(struct gigase
 {
 	/* decode message */
 	capi_message2cmsg(&iif->acmsg, skb->data);
-	if (printk_timed_ratelimit(&ignored_msg_dump_time, 30 * 1000))
-		dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
 	send_conf(iif, ap, skb, CapiMessageNotSupportedInCurrentState);
 }
 
@@ -2085,11 +2083,9 @@ static void do_nothing(struct gigaset_ca
 		       struct gigaset_capi_appl *ap,
 		       struct sk_buff *skb)
 {
-	if (printk_timed_ratelimit(&ignored_msg_dump_time, 30 * 1000)) {
-		/* decode message */
-		capi_message2cmsg(&iif->acmsg, skb->data);
-		dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
-	}
+	/* decode message */
+	capi_message2cmsg(&iif->acmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
 	dev_kfree_skb_any(skb);
 }
 

[ 09/94] vfs: make AIO use the proper rw_verify_area() area helpers

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

commit a70b52ec1aaeaf60f4739edb1b422827cb6f3893 upstream.

We had for some reason overlooked the AIO interface, and it didn't use
the proper rw_verify_area() helper function that checks (for example)
mandatory locking on the file, and that the size of the access doesn't
cause us to overflow the provided offset limits etc.

Instead, AIO did just the security_file_permission() thing (that
rw_verify_area() also does) directly.

This fixes it to do all the proper helper functions, which not only
means that now mandatory file locking works with AIO too, we can
actually remove lines of code.

Reported-by: Manish Honap <manish_honap_vit@yahoo.co.in>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/aio.c |   30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

--- a/fs/aio.c
+++ b/fs/aio.c
@@ -1477,6 +1477,10 @@ static ssize_t aio_setup_vectored_rw(int
 	if (ret < 0)
 		goto out;
 
+	ret = rw_verify_area(type, kiocb->ki_filp, &kiocb->ki_pos, ret);
+	if (ret < 0)
+		goto out;
+
 	kiocb->ki_nr_segs = kiocb->ki_nbytes;
 	kiocb->ki_cur_seg = 0;
 	/* ki_nbytes/left now reflect bytes instead of segs */
@@ -1488,11 +1492,17 @@ out:
 	return ret;
 }
 
-static ssize_t aio_setup_single_vector(struct kiocb *kiocb)
+static ssize_t aio_setup_single_vector(int type, struct file * file, struct kiocb *kiocb)
 {
+	int bytes;
+
+	bytes = rw_verify_area(type, file, &kiocb->ki_pos, kiocb->ki_left);
+	if (bytes < 0)
+		return bytes;
+
 	kiocb->ki_iovec = &kiocb->ki_inline_vec;
 	kiocb->ki_iovec->iov_base = kiocb->ki_buf;
-	kiocb->ki_iovec->iov_len = kiocb->ki_left;
+	kiocb->ki_iovec->iov_len = bytes;
 	kiocb->ki_nr_segs = 1;
 	kiocb->ki_cur_seg = 0;
 	return 0;
@@ -1517,10 +1527,7 @@ static ssize_t aio_setup_iocb(struct kio
 		if (unlikely(!access_ok(VERIFY_WRITE, kiocb->ki_buf,
 			kiocb->ki_left)))
 			break;
-		ret = security_file_permission(file, MAY_READ);
-		if (unlikely(ret))
-			break;
-		ret = aio_setup_single_vector(kiocb);
+		ret = aio_setup_single_vector(READ, file, kiocb);
 		if (ret)
 			break;
 		ret = -EINVAL;
@@ -1535,10 +1542,7 @@ static ssize_t aio_setup_iocb(struct kio
 		if (unlikely(!access_ok(VERIFY_READ, kiocb->ki_buf,
 			kiocb->ki_left)))
 			break;
-		ret = security_file_permission(file, MAY_WRITE);
-		if (unlikely(ret))
-			break;
-		ret = aio_setup_single_vector(kiocb);
+		ret = aio_setup_single_vector(WRITE, file, kiocb);
 		if (ret)
 			break;
 		ret = -EINVAL;
@@ -1549,9 +1553,6 @@ static ssize_t aio_setup_iocb(struct kio
 		ret = -EBADF;
 		if (unlikely(!(file->f_mode & FMODE_READ)))
 			break;
-		ret = security_file_permission(file, MAY_READ);
-		if (unlikely(ret))
-			break;
 		ret = aio_setup_vectored_rw(READ, kiocb, compat);
 		if (ret)
 			break;
@@ -1563,9 +1564,6 @@ static ssize_t aio_setup_iocb(struct kio
 		ret = -EBADF;
 		if (unlikely(!(file->f_mode & FMODE_WRITE)))
 			break;
-		ret = security_file_permission(file, MAY_WRITE);
-		if (unlikely(ret))
-			break;
 		ret = aio_setup_vectored_rw(WRITE, kiocb, compat);
 		if (ret)
 			break;

[ 10/94] iwlwifi: use 6000G2B for 6030 device series

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wey-Yi Guy <wey-yi.w.guy@intel.com>

commit 35e7adaaf6932c5ffb22c6ec521734434c65adc5 upstream.

"iwlwifi: use correct released ucode version" change
the ucode api ok from 6000G2 to 6000G2B, but it shall belong
to 6030 device series, not the 6005 device series. Fix it

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/iwlwifi/iwl-6000.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -391,7 +391,7 @@ struct iwl_cfg iwl6005_2agn_d_cfg = {
 #define IWL_DEVICE_6030						\
 	.fw_name_pre = IWL6030_FW_PRE,				\
 	.ucode_api_max = IWL6000G2_UCODE_API_MAX,		\
-	.ucode_api_ok = IWL6000G2B_UCODE_API_OK,		\
+	.ucode_api_ok = IWL6000G2_UCODE_API_OK,			\
 	.ucode_api_min = IWL6000G2_UCODE_API_MIN,		\
 	.eeprom_ver = EEPROM_6030_EEPROM_VERSION,		\
 	.eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION,	\

[ 11/94] iwlwifi: use correct released ucode version

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com>

commit e377a4fc768d7d477e58888bdbddd0103d6238bf upstream.

Report correctly the latest released version
of the iwlwifi firmware for all
iwlwifi-supported devices.

Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/iwlwifi/iwl-6000.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -351,7 +351,7 @@ static struct iwl_bt_params iwl6000_bt_p
 #define IWL_DEVICE_6005						\
 	.fw_name_pre = IWL6005_FW_PRE,				\
 	.ucode_api_max = IWL6000G2_UCODE_API_MAX,		\
-	.ucode_api_ok = IWL6000G2_UCODE_API_OK,			\
+	.ucode_api_ok = IWL6000G2B_UCODE_API_OK,		\
 	.ucode_api_min = IWL6000G2_UCODE_API_MIN,		\
 	.eeprom_ver = EEPROM_6005_EEPROM_VERSION,		\
 	.eeprom_calib_ver = EEPROM_6005_TX_POWER_VERSION,	\

[ 12/94] net/wireless: ipw2200: Fix WARN_ON occurring in wiphy_register called by ipw_pci_probe

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislav Yakovlev <stas.yakovlev@gmail.com>

commit 7ed85b65ab611ba841d508ae4ff8c45fa0c48c80 upstream.

The problem was found by Stefan Lippers-Hollmann
http://marc.info/?l=linux-wireless&m=132720334512946&w=2

WARNING: at /tmp/buildd/linux-aptosid-3.2/debian/build/source_i386_none/net/wireless/core.c:562 wiphy_register+0x45/0x38d [cfg80211]()
Hardware name: TravelMate 290 \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff
Modules linked in: ipw2200(+) iTCO_wdt libipw joydev drm snd_seq snd_timer snd_seq_device iTCO_vendor_support yenta_socket snd intel_agp i2c_i801 pcmcia_rsrc cfg80211 soundcore parport_pc psmouse parport rng_core snd_page_alloc serio_raw pcspkr i2c_algo_bit intel_gtt pcmcia_core evdev irda crc_ccitt rfkill lib80211 processor container ac battery shpchp pci_hotplug button ext4 mbcache jbd2 crc16 dm_mod sd_mod sr_mod crc_t10dif cdrom ata_generic pata_acpi ata_piix libata scsi_mod firewire_ohci firewire_core crc_itu_t 8139too 8139cp mii uhci_hcd ehci_hcd usbcore usb_common [last unloaded: scsi_wait_scan]
Pid: 328, comm: modprobe Not tainted 3.2-1.slh.4-aptosid-686 #1
Call Trace:
[<c012eaf4>] ? warn_slowpath_common+0x7c/0x8f
[<e0ff0b3e>] ? wiphy_register+0x45/0x38d [cfg80211]
[<e0ff0b3e>] ? wiphy_register+0x45/0x38d [cfg80211]
[<c012eb22>] ? warn_slowpath_null+0x1b/0x1f
[<e0ff0b3e>] ? wiphy_register+0x45/0x38d [cfg80211]
[<c01f89d7>] ? internal_create_group+0xf5/0xff
[<e0a2de1c>] ? ipw_pci_probe+0xa9a/0xbd0 [ipw2200]
[<c01519f4>] ? arch_local_irq_save+0xf/0x14
[<c0252986>] ? pci_device_probe+0x53/0x9a
[<c02c2820>] ? driver_probe_device+0x94/0x124
[<c0252871>] ? pci_match_id+0x15/0x34
[<c02c28f0>] ? __driver_attach+0x40/0x5b
[<c02c1d81>] ? bus_for_each_dev+0x37/0x60
[<c02c25aa>] ? driver_attach+0x17/0x1a
[<c02c28b0>] ? driver_probe_device+0x124/0x124
[<c02c22c4>] ? bus_add_driver+0x92/0x1d1
[<e099d000>] ? 0xe099cfff
[<c02c2cb8>] ? driver_register+0x7d/0xd4
[<c017cd50>] ? jump_label_module_notify+0xec/0x167
[<e099d000>] ? 0xe099cfff
[<c0253017>] ? __pci_register_driver+0x32/0x87
[<e099d000>] ? 0xe099cfff
[<e099d02e>] ? ipw_init+0x2e/0x72 [ipw2200]
[<c0101173>] ? do_one_initcall+0x7d/0x132
[<c0145016>] ? __blocking_notifier_call_chain+0x47/0x4f
[<c0154a73>] ? sys_init_module+0x13a4/0x159c
[<c03a639f>] ? sysenter_do_call+0x12/0x28

This warning appears only if we apply Ben Hutchings' fix
http://marc.info/?l=linux-wireless&m=132720195012653&w=2
for the bug reported by Cesare Leonardi
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=656813
with cfg80211 warning during device registration
("cfg80211: failed to add phy80211 symlink to netdev!").

We separate device bring up and registration with network stack
to avoid the problem.

After that Ben Hutchings' fix can be applied to fix the bug.

Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ipw2x00/ipw2200.c |   21 ++++++---------------
 1 file changed, 6 insertions(+), 15 deletions(-)

--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -11443,20 +11443,6 @@ static void ipw_bg_down(struct work_stru
 	mutex_unlock(&priv->mutex);
 }
 
-/* Called by register_netdev() */
-static int ipw_net_init(struct net_device *dev)
-{
-	int rc = 0;
-	struct ipw_priv *priv = libipw_priv(dev);
-
-	mutex_lock(&priv->mutex);
-	if (ipw_up(priv))
-		rc = -EIO;
-	mutex_unlock(&priv->mutex);
-
-	return rc;
-}
-
 static int ipw_wdev_init(struct net_device *dev)
 {
 	int i, rc = 0;
@@ -11722,7 +11708,6 @@ static void ipw_prom_free(struct ipw_pri
 #endif
 
 static const struct net_device_ops ipw_netdev_ops = {
-	.ndo_init		= ipw_net_init,
 	.ndo_open		= ipw_net_open,
 	.ndo_stop		= ipw_net_stop,
 	.ndo_set_rx_mode	= ipw_net_set_multicast_list,
@@ -11849,6 +11834,12 @@ static int __devinit ipw_pci_probe(struc
 		goto out_release_irq;
 	}
 
+	if (ipw_up(priv)) {
+		mutex_unlock(&priv->mutex);
+		err = -EIO;
+		goto out_remove_sysfs;
+	}
+
 	mutex_unlock(&priv->mutex);
 	err = register_netdev(net_dev);
 	if (err) {

[ 13/94] cfg80211: warn if db.txt is empty with CONFIG_CFG80211_INTERNAL_REGDB

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Luis R. Rodriguez" <mcgrof@frijolero.org>

commit 80007efeff0568375b08faf93c7aad65602cb97e upstream.

It has happened twice now where elaborate troubleshooting has
undergone on systems where CONFIG_CFG80211_INTERNAL_REGDB [0]
has been set but yet net/wireless/db.txt was not updated.

Despite the documentation on this it seems system integrators could
use some more help with this, so throw out a kernel warning at boot time
when their database is empty.

This does mean that the error-prone system integrator won't likely
realize the issue until they boot the machine but -- it does not seem
to make sense to enable a build bug breaking random build testing.

[0] http://wireless.kernel.org/en/developers/Regulatory/CRDA#CONFIG_CFG80211_INTERNAL_REGDB

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Youngsin Lee <youngsin@qualcomm.com>
Cc: Raja Mani <rmani@qca.qualcomm.com>
Cc: Senthil Kumar Balasubramanian <senthilb@qca.qualcomm.com>
Cc: Vipin Mehta <vipimeht@qca.qualcomm.com>
Cc: yahuan@qca.qualcomm.com
Cc: jjan@qca.qualcomm.com
Cc: vthiagar@qca.qualcomm.com
Cc: henrykim@qualcomm.com
Cc: jouni@qca.qualcomm.com
Cc: athiruve@qca.qualcomm.com
Cc: cjkim@qualcomm.com
Cc: philipk@qca.qualcomm.com
Cc: sunnykim@qualcomm.com
Cc: sskwak@qualcomm.com
Cc: kkim@qualcomm.com
Cc: mattbyun@qualcomm.com
Cc: ryanlee@qualcomm.com
Cc: simbap@qualcomm.com
Cc: krislee@qualcomm.com
Cc: conner@qualcomm.com
Cc: hojinkim@qualcomm.com
Cc: honglee@qualcomm.com
Cc: johnwkim@qualcomm.com
Cc: jinyong@qca.qualcomm.com
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/wireless/reg.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -388,7 +388,15 @@ static void reg_regdb_query(const char *
 
 	schedule_work(&reg_regdb_work);
 }
+
+/* Feel free to add any other sanity checks here */
+static void reg_regdb_size_check(void)
+{
+	/* We should ideally BUILD_BUG_ON() but then random builds would fail */
+	WARN_ONCE(!reg_regdb_size, "db.txt is empty, you should update it...");
+}
 #else
+static inline void reg_regdb_size_check(void) {}
 static inline void reg_regdb_query(const char *alpha2) {}
 #endif /* CONFIG_CFG80211_INTERNAL_REGDB */
 
@@ -2337,6 +2345,8 @@ int __init regulatory_init(void)
 	spin_lock_init(&reg_requests_lock);
 	spin_lock_init(&reg_pending_beacons_lock);
 
+	reg_regdb_size_check();
+
 	cfg80211_regdomain = cfg80211_world_regdom;
 
 	user_alpha2[0] = '9';

[ 14/94] regulator: core: Release regulator-regulator supplies on error

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit e81dba85c6388dfabcb76cbc2b8bd02836a53ae5 upstream.

If we fail while registering a regulator make sure we release the supply
for the regulator if there is one.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/regulator/core.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2877,6 +2877,8 @@ unset_supplies:
 	unset_regulator_supplies(rdev);
 
 scrub:
+	if (rdev->supply)
+		regulator_put(rdev->supply);
 	kfree(rdev->constraints);
 	device_unregister(&rdev->dev);
 	/* device core frees rdev */

[ 15/94] Fix blocking allocations called very early during bootup

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 31a67102f4762df5544bc2dfb34a931233d2a5b2 upstream.

During early boot, when the scheduler hasn't really been fully set up,
we really can't do blocking allocations because with certain (dubious)
configurations the "might_resched()" calls can actually result in
scheduling events.

We could just make such users always use GFP_ATOMIC, but quite often the
code that does the allocation isn't really aware of the fact that the
scheduler isn't up yet, and forcing that kind of random knowledge on the
initialization code is just annoying and not good for anybody.

And we actually have a the 'gfp_allowed_mask' exactly for this reason:
it's just that the kernel init sequence happens to set it to allow
blocking allocations much too early.

So move the 'gfp_allowed_mask' initialization from 'start_kernel()'
(which is some of the earliest init code, and runs with preemption
disabled for good reasons) into 'kernel_init()'.  kernel_init() is run
in the newly created thread that will become the 'init' process, as
opposed to the early startup code that runs within the context of what
will be the first idle thread.

So by the time we reach 'kernel_init()', we know that the scheduler must
be at least limping along, because we've already scheduled from the idle
thread into the init thread.

Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 init/main.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/init/main.c
+++ b/init/main.c
@@ -558,9 +558,6 @@ asmlinkage void __init start_kernel(void
 	early_boot_irqs_disabled = false;
 	local_irq_enable();
 
-	/* Interrupts are enabled now so all GFP allocations are safe. */
-	gfp_allowed_mask = __GFP_BITS_MASK;
-
 	kmem_cache_init_late();
 
 	/*
@@ -792,6 +789,10 @@ static int __init kernel_init(void * unu
 	 * Wait until kthreadd is all set-up.
 	 */
 	wait_for_completion(&kthreadd_done);
+
+	/* Now the scheduler is fully set up and can do blocking allocations */
+	gfp_allowed_mask = __GFP_BITS_MASK;
+
 	/*
 	 * init can allocate pages on any node
 	 */

[ 16/94] s390/pfault: fix task state race

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiko Carstens <heiko.carstens@de.ibm.com>

commit d5e50a51ccbda36b379aba9d1131a852eb908dda upstream.

When setting the current task state to TASK_UNINTERRUPTIBLE this can
race with a different cpu. The other cpu could set the task state after
it inspected it (while it was still TASK_RUNNING) to TASK_RUNNING which
would change the state from TASK_UNINTERRUPTIBLE to TASK_RUNNING again.

This race was always present in the pfault interrupt code but didn't
cause anything harmful before commit f2db2e6c "[S390] pfault: cpu hotplug
vs missing completion interrupts" which relied on the fact that after
setting the task state to TASK_UNINTERRUPTIBLE the task would really
sleep.
Since this is not necessarily the case the result may be a list corruption
of the pfault_list or, as observed, a use-after-free bug while trying to
access the task_struct of a task which terminated itself already.

To fix this, we need to get a reference of the affected task when receiving
the initial pfault interrupt and add special handling if we receive yet
another initial pfault interrupt when the task is already enqueued in the
pfault list.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/mm/fault.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -574,6 +574,7 @@ static void pfault_interrupt(unsigned in
 			tsk->thread.pfault_wait = 0;
 			list_del(&tsk->thread.list);
 			wake_up_process(tsk);
+			put_task_struct(tsk);
 		} else {
 			/* Completion interrupt was faster than initial
 			 * interrupt. Set pfault_wait to -1 so the initial
@@ -588,14 +589,22 @@ static void pfault_interrupt(unsigned in
 		put_task_struct(tsk);
 	} else {
 		/* signal bit not set -> a real page is missing. */
-		if (tsk->thread.pfault_wait == -1) {
+		if (tsk->thread.pfault_wait == 1) {
+			/* Already on the list with a reference: put to sleep */
+			set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+			set_tsk_need_resched(tsk);
+		} else if (tsk->thread.pfault_wait == -1) {
 			/* Completion interrupt was faster than the initial
 			 * interrupt (pfault_wait == -1). Set pfault_wait
 			 * back to zero and exit. */
 			tsk->thread.pfault_wait = 0;
 		} else {
 			/* Initial interrupt arrived before completion
-			 * interrupt. Let the task sleep. */
+			 * interrupt. Let the task sleep.
+			 * An extra task reference is needed since a different
+			 * cpu may set the task state to TASK_RUNNING again
+			 * before the scheduler is reached. */
+			get_task_struct(tsk);
 			tsk->thread.pfault_wait = 1;
 			list_add(&tsk->thread.list, &pfault_list);
 			set_task_state(tsk, TASK_UNINTERRUPTIBLE);
@@ -620,6 +629,7 @@ static int __cpuinit pfault_cpu_notify(s
 			list_del(&thread->list);
 			tsk = container_of(thread, struct task_struct, thread);
 			wake_up_process(tsk);
+			put_task_struct(tsk);
 		}
 		spin_unlock_irq(&pfault_lock);
 		break;

[ 17/94] SCSI: mpt2sas: Fix for panic happening because of improper memory allocation

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "nagalakshmi.nandigama@lsi.com" <nagalakshmi.nandigama@lsi.com>

commit e42fafc25fa86c61824e8d4c5e7582316415d24f upstream.

The ioc->pfacts member in the IOC structure is getting set to zero
following a call to _base_get_ioc_facts due to the memset in that routine.
So if the ioc->pfacts was read after a host reset, there would be a NULL
pointer dereference. The routine _base_get_ioc_facts is called from context
of host reset.  The problem in _base_get_ioc_facts  is the size of
Mpi2IOCFactsReply is 64, whereas the sizeof "struct mpt2sas_facts" is 60,
so there is a four byte overflow resulting from the memset.

Also, there is memset in _base_get_port_facts using the incorrect structure,
it should be "struct mpt2sas_port_facts" instead of Mpi2PortFactsReply.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/mpt2sas/mpt2sas_base.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -3340,7 +3340,7 @@ _base_get_port_facts(struct MPT2SAS_ADAP
 	}
 
 	pfacts = &ioc->pfacts[port];
-	memset(pfacts, 0, sizeof(Mpi2PortFactsReply_t));
+	memset(pfacts, 0, sizeof(struct mpt2sas_port_facts));
 	pfacts->PortNumber = mpi_reply.PortNumber;
 	pfacts->VP_ID = mpi_reply.VP_ID;
 	pfacts->VF_ID = mpi_reply.VF_ID;
@@ -3382,7 +3382,7 @@ _base_get_ioc_facts(struct MPT2SAS_ADAPT
 	}
 
 	facts = &ioc->facts;
-	memset(facts, 0, sizeof(Mpi2IOCFactsReply_t));
+	memset(facts, 0, sizeof(struct mpt2sas_facts));
 	facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion);
 	facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion);
 	facts->VP_ID = mpi_reply.VP_ID;
@@ -4259,7 +4259,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPT
 		goto out_free_resources;
 
 	ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
-	    sizeof(Mpi2PortFactsReply_t), GFP_KERNEL);
+	    sizeof(struct mpt2sas_port_facts), GFP_KERNEL);
 	if (!ioc->pfacts) {
 		r = -ENOMEM;
 		goto out_free_resources;

[ 18/94] isci: fix oem parameter validation on single controller skus

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dan.j.williams@intel.com>

commit fc25f79af321c01a739150ba2c09435cf977a63d upstream.

OEM parameters [1] are parsed from the platform option-rom / efi
driver.  By default the driver was validating the parameters for the
dual-controller case, but in single-controller case only the first set
of parameters may be valid.

Limit the validation to the number of actual controllers detected
otherwise the driver may fail to parse the valid parameters leading to
driver-load or runtime failures.

[1] the platform specific set of phy address, configuration,and analog
    tuning values

Reported-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/isci/init.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -481,7 +481,7 @@ static int __devinit isci_pci_probe(stru
 	if (!orom)
 		orom = isci_request_oprom(pdev);
 
-	for (i = 0; orom && i < ARRAY_SIZE(orom->ctrl); i++) {
+	for (i = 0; orom && i < num_controllers(pdev); i++) {
 		if (sci_oem_parameters_validate(&orom->ctrl[i],
 						orom->hdr.version)) {
 			dev_warn(&pdev->dev,

[ 19/94] RDMA/cxgb4: Always wake up waiters in c4iw_peer_abort_intr()

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steve Wise <swise@opengridcomputing.com>

commit 0f1dcfae6bc5563424346ad3a03282b8235a4c33 upstream.

This fixes a race where an ingress abort fails to wake up the thread
blocked in rdma_init() causing the app to hang.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/cxgb4/cm.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -2665,11 +2665,8 @@ static int peer_abort_intr(struct c4iw_d
 
 	/*
 	 * Wake up any threads in rdma_init() or rdma_fini().
-	 * However, this is not needed if com state is just
-	 * MPA_REQ_SENT
 	 */
-	if (ep->com.state != MPA_REQ_SENT)
-		c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
+	c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
 	sched(dev, skb);
 	return 0;
 }

[ 20/94] RDMA/cxgb4: Use dst parameter in import_ep()

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steve Wise <swise@opengridcomputing.com>

commit bd61baaf59669accae2720799394a51fecabe5d9 upstream.

Function import_ep() is incorrectly using ep->dst instead of the dst
ptr passed in.  This causes a crash when accepting new rdma connections
becase ep->dst is not initialized yet.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/cxgb4/cm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -1593,7 +1593,7 @@ static int import_ep(struct c4iw_ep *ep,
 					n, n->dev, 0);
 		if (!ep->l2t)
 			goto out;
-		ep->mtu = dst_mtu(ep->dst);
+		ep->mtu = dst_mtu(dst);
 		ep->tx_chan = cxgb4_port_chan(n->dev);
 		ep->smac_idx = (cxgb4_port_viid(n->dev) & 0x7F) << 1;
 		step = cdev->rdev.lldi.ntxq /

[ 21/94] RDMA/cxgb4: Drop peer_abort when no endpoint found

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steve Wise <swise@opengridcomputing.com>

commit 14b9222808bb8bfefc71f72bc0dbdcf3b2f0140f upstream.

Log a warning and drop the abort message.  Otherwise we will do a
bogus wake_up() and crash.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/cxgb4/cm.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -2654,6 +2654,12 @@ static int peer_abort_intr(struct c4iw_d
 	unsigned int tid = GET_TID(req);
 
 	ep = lookup_tid(t, tid);
+	if (!ep) {
+		printk(KERN_WARNING MOD
+		       "Abort on non-existent endpoint, tid %d\n", tid);
+		kfree_skb(skb);
+		return 0;
+	}
 	if (is_neg_adv_abort(req->status)) {
 		PDBG("%s neg_adv_abort ep %p tid %u\n", __func__, ep,
 		     ep->hwtid);

[ 22/94] powerpc: Fix broken cpu_idle_wait() implementation

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit 9cd75e13de2dcf32ecc21c7f277cff3c0ced059e upstream.

commit 771dae818 (powerpc/cpuidle: Add cpu_idle_wait() to allow
switching of idle routines) implemented cpu_idle_wait() for powerpc.

The changelog says:
 "The equivalent routine for x86 is in arch/x86/kernel/process.c
  but the powerpc implementation is different.":

Unfortunately the changelog is completely useless as it does not tell
_WHY_ it is different.

Aside of being different the implementation is patently wrong.

The rescheduling IPI is async. That means that there is no guarantee,
that the other cores have executed the IPI when cpu_idle_wait()
returns. But that's the whole purpose of this function: to guarantee
that no CPU uses the old idle handler anymore.

Use the smp_functional_call() based implementation, which fulfils the
requirements.

[ This code is going to replaced by a core version to remove all the
  pointless copies in arch/*, but this one should go to stable ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Cc: Trinabh Gupta <g.trinabh@gmail.com>
Cc: Arun R Bharadwaj <arun.r.bharadwaj@gmail.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Link: http://lkml.kernel.org/r/20120507175651.980164748@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/idle.c |   14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -109,6 +109,9 @@ void cpu_idle(void)
 	}
 }
 
+static void do_nothing(void *unused)
+{
+}
 
 /*
  * cpu_idle_wait - Used to ensure that all the CPUs come out of the old
@@ -119,16 +122,9 @@ void cpu_idle(void)
  */
 void cpu_idle_wait(void)
 {
-	int cpu;
 	smp_mb();
-
-	/* kick all the CPUs so that they exit out of old idle routine */
-	get_online_cpus();
-	for_each_online_cpu(cpu) {
-		if (cpu != smp_processor_id())
-			smp_send_reschedule(cpu);
-	}
-	put_online_cpus();
+	/* kick all the CPUs so that they exit out of pm_idle */
+	smp_call_function(do_nothing, NULL, 1);
 }
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 

[ 23/94] KEYS: Use the compat keyctl() syscall wrapper on Sparc64 for Sparc32 compat

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Howells <dhowells@redhat.com>

commit 45de6767dc51358a188f75dc4ad9dfddb7fb9480 upstream.

Use the 32-bit compat keyctl() syscall wrapper on Sparc64 for Sparc32 binary
compatibility.

Without this, keyctl(KEYCTL_INSTANTIATE_IOV) is liable to malfunction as it
uses an iovec array read from userspace - though the kernel should survive this
as it checks pointers and sizes anyway.

I think all the other keyctl() function should just work, provided (a) the top
32-bits of each 64-bit argument register are cleared prior to invoking the
syscall routine, and the 32-bit address space is right at the 0-end of the
64-bit address space.  Most of the arguments are 32-bit anyway, and so for
those clearing is not required.

Signed-off-by: David Howells <dhowells@redhat.com
cc: "David S. Miller" <davem@davemloft.net>
cc: sparclinux@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/sparc/Kconfig             |    3 +++
 arch/sparc/kernel/systbls_64.S |    2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)

--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -582,6 +582,9 @@ config SYSVIPC_COMPAT
 	depends on COMPAT && SYSVIPC
 	default y
 
+config KEYS_COMPAT
+	def_bool y if COMPAT && KEYS
+
 endmenu
 
 source "net/Kconfig"
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -74,7 +74,7 @@ sys_call_table32:
 	.word sys_timer_delete, compat_sys_timer_create, sys_ni_syscall, compat_sys_io_setup, sys_io_destroy
 /*270*/	.word sys32_io_submit, sys_io_cancel, compat_sys_io_getevents, sys32_mq_open, sys_mq_unlink
 	.word compat_sys_mq_timedsend, compat_sys_mq_timedreceive, compat_sys_mq_notify, compat_sys_mq_getsetattr, compat_sys_waitid
-/*280*/	.word sys32_tee, sys_add_key, sys_request_key, sys_keyctl, compat_sys_openat
+/*280*/	.word sys32_tee, sys_add_key, sys_request_key, compat_sys_keyctl, compat_sys_openat
 	.word sys_mkdirat, sys_mknodat, sys_fchownat, compat_sys_futimesat, compat_sys_fstatat64
 /*290*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
 	.word sys_fchmodat, sys_faccessat, compat_sys_pselect6, compat_sys_ppoll, sys_unshare

[ 24/94] SELinux: if sel_make_bools errors dont leave inconsistent state

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Paris <eparis@redhat.com>

commit 154c50ca4eb9ae472f50b6a481213e21ead4457d upstream.

We reset the bool names and values array to NULL, but do not reset the
number of entries in these arrays to 0.  If we error out and then get back
into this function we will walk these NULL pointers based on the belief
that they are non-zero length.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/selinux/selinuxfs.c |    1 +
 1 file changed, 1 insertion(+)

--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -1232,6 +1232,7 @@ static int sel_make_bools(void)
 		kfree(bool_pending_names[i]);
 	kfree(bool_pending_names);
 	kfree(bool_pending_values);
+	bool_num = 0;
 	bool_pending_names = NULL;
 	bool_pending_values = NULL;
 

[ 25/94] IB/core: Fix mismatch between locked and pinned pages

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yishai Hadas <yishaih@mellanox.com>

commit c4870eb874ac16dccef40e1bc7a002c7e9156adc upstream.

Commit bc3e53f682d9 ("mm: distinguish between mlocked and pinned
pages") introduced a separate counter for pinned pages and used it in
the IB stack.  However, in ib_umem_get() the pinned counter is
incremented, but ib_umem_release() wrongly decrements the locked
counter.  Fix this.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/core/umem.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -269,7 +269,7 @@ void ib_umem_release(struct ib_umem *ume
 	} else
 		down_write(&mm->mmap_sem);
 
-	current->mm->locked_vm -= diff;
+	current->mm->pinned_vm -= diff;
 	up_write(&mm->mmap_sem);
 	mmput(mm);
 	kfree(umem);

[ 26/94] drivers/staging/comedi/comedi_fops.c: add missing vfree

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julia Lawall <Julia.Lawall@lip6.fr>

commit abae41e6438b798e046d721b6ccdd55b4a398170 upstream.

aux_free is freed on all other exits from the function.  By removing the
return, we can benefit from the vfree already at the end of the function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/comedi_fops.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -280,7 +280,7 @@ static int do_devconfig_ioctl(struct com
 	if (ret == 0) {
 		if (!try_module_get(dev->driver->module)) {
 			comedi_device_detach(dev);
-			return -ENOSYS;
+			ret = -ENOSYS;
 		}
 	}
 

[ 27/94] perf/x86: Update event scheduling constraints for AMD family 15h models

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Robert Richter <robert.richter@amd.com>

commit 5bcdf5e4fee3c45e1281c25e4941f2163cb28c65 upstream.

This update is for newer family 15h cpu models from 0x02 to 0x1f.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1337337642-1621-1-git-send-email-robert.richter@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/perf_event_amd.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -473,6 +473,7 @@ static __initconst const struct x86_pmu
  * 0x023	DE	PERF_CTL[2:0]
  * 0x02D	LS	PERF_CTL[3]
  * 0x02E	LS	PERF_CTL[3,0]
+ * 0x031	LS	PERF_CTL[2:0] (**)
  * 0x043	CU	PERF_CTL[2:0]
  * 0x045	CU	PERF_CTL[2:0]
  * 0x046	CU	PERF_CTL[2:0]
@@ -486,10 +487,12 @@ static __initconst const struct x86_pmu
  * 0x0DD	LS	PERF_CTL[5:0]
  * 0x0DE	LS	PERF_CTL[5:0]
  * 0x0DF	LS	PERF_CTL[5:0]
+ * 0x1C0	EX	PERF_CTL[5:3]
  * 0x1D6	EX	PERF_CTL[5:0]
  * 0x1D8	EX	PERF_CTL[5:0]
  *
- * (*) depending on the umask all FPU counters may be used
+ * (*)  depending on the umask all FPU counters may be used
+ * (**) only one unitmask enabled at a time
  */
 
 static struct event_constraint amd_f15_PMC0  = EVENT_CONSTRAINT(0, 0x01, 0);
@@ -539,6 +542,12 @@ amd_get_event_constraints_f15h(struct cp
 			return &amd_f15_PMC3;
 		case 0x02E:
 			return &amd_f15_PMC30;
+		case 0x031:
+			if (hweight_long(hwc->config & ARCH_PERFMON_EVENTSEL_UMASK) <= 1)
+				return &amd_f15_PMC20;
+			return &emptyconstraint;
+		case 0x1C0:
+			return &amd_f15_PMC53;
 		default:
 			return &amd_f15_PMC50;
 		}

[ 28/94] mtd: sm_ftl: fix typo in major number.

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maxim Levitsky <maximlevitsky@gmail.com>

commit 452380efbd72d8d41f53ea64c8a6ea1fedc4394d upstream.

major == 0 allocates dynamic major, not major == -1

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/sm_ftl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/sm_ftl.c
+++ b/drivers/mtd/sm_ftl.c
@@ -1256,7 +1256,7 @@ static void sm_remove_dev(struct mtd_blk
 
 static struct mtd_blktrans_ops sm_ftl_ops = {
 	.name		= "smblk",
-	.major		= -1,
+	.major		= 0,
 	.part_bits	= SM_FTL_PARTN_BITS,
 	.blksize	= SM_SECTOR_SIZE,
 	.getgeo		= sm_getgeo,

[ 29/94] libata: forbid port runtime pm by default, fixing regression

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lin Ming <ming.m.lin@intel.com>

commit 0c8d32c27f5cf6e14ca14b4758d1e994eebd50fd upstream.

Forbid port runtime pm by default because it has known hotplug issue.
User can allow it by, for example

echo auto > /sys/devices/pci0000:00/0000:00:1f.2/ata2/power/control

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-transport.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -294,6 +294,7 @@ int ata_tport_add(struct device *parent,
 	device_enable_async_suspend(dev);
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
+	pm_runtime_forbid(dev);
 
 	transport_add_device(dev);
 	transport_configure_device(dev);

[ 30/94] ahci: Detect Marvell 88SE9172 SATA controller

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matt Johnson <johnso87@illinois.edu>

commit 642d89252201c4155fc3946bf9cdea409e5d263e upstream.

The Marvell 88SE9172 SATA controller (PCI ID 1b4b 917a) already worked
once it was detected, but was missing an ahci_pci_tbl entry.

Boot tested on a Gigabyte Z68X-UD3H-B3 motherboard.

Signed-off-by: Matt Johnson <johnso87@illinois.edu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/ahci.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -386,6 +386,8 @@ static const struct pci_device_id ahci_p
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9128 */
 	{ PCI_DEVICE(0x1b4b, 0x9125),
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9125 */
+	{ PCI_DEVICE(0x1b4b, 0x917a),
+	  .driver_data = board_ahci_yes_fbs },			/* 88se9172 */
 	{ PCI_DEVICE(0x1b4b, 0x91a3),
 	  .driver_data = board_ahci_yes_fbs },
 

[ 31/94] HID: wiimote: Fix IR data parser

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Herrmann <dh.herrmann@googlemail.com>

commit 74b89e8a3625c17c7452532dfb997ac4f1a38751 upstream.

We incorrectly parse incoming IR data. The extra byte contains the upper
bits and not the lower bits of the x/y coordinates. User-space expects
absolute position data from us so this patch does not break existing
applications. On the contrary, it extends the virtual view and fixes
garbage reports for margin areas of the virtual screen.

Reported-by: Peter Bukovsky <bukovsky.peter@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/hid-wiimote-core.c |   16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

--- a/drivers/hid/hid-wiimote-core.c
+++ b/drivers/hid/hid-wiimote-core.c
@@ -769,7 +769,7 @@ static void __ir_to_input(struct wiimote
 
 	/*
 	 * Basic IR data is encoded into 3 bytes. The first two bytes are the
-	 * upper 8 bit of the X/Y data, the 3rd byte contains the lower 2 bits
+	 * lower 8 bit of the X/Y data, the 3rd byte contains the upper 2 bits
 	 * of both.
 	 * If data is packed, then the 3rd byte is put first and slightly
 	 * reordered. This allows to interleave packed and non-packed data to
@@ -778,17 +778,11 @@ static void __ir_to_input(struct wiimote
 	 */
 
 	if (packed) {
-		x = ir[1] << 2;
-		y = ir[2] << 2;
-
-		x |= ir[0] & 0x3;
-		y |= (ir[0] >> 2) & 0x3;
+		x = ir[1] | ((ir[0] & 0x03) << 8);
+		y = ir[2] | ((ir[0] & 0x0c) << 6);
 	} else {
-		x = ir[0] << 2;
-		y = ir[1] << 2;
-
-		x |= (ir[2] >> 4) & 0x3;
-		y |= (ir[2] >> 6) & 0x3;
+		x = ir[0] | ((ir[2] & 0x30) << 4);
+		y = ir[1] | ((ir[2] & 0xc0) << 2);
 	}
 
 	input_report_abs(wdata->ir, xid, x);

[ 32/94] usbhid: prevent deadlock during timeout

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Neukum <oliver@neukum.org>

commit 8815bb09af21316aeb5f8948b24ac62181670db2 upstream.

On some HCDs usb_unlink_urb() can directly call the
completion handler. That limits the spinlocks that can
be taken in the handler to locks not held while calling
usb_unlink_urb()
To prevent a race with resubmission, this patch exposes
usbcore's infrastructure for blocking submission, uses it
and so drops the lock without causing a race in usbhid.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/usbhid/hid-core.c |   61 +++++++++++++++++++++++++++++++++++++-----
 drivers/usb/core/urb.c        |   21 ++++++++++++++
 include/linux/usb.h           |    3 ++
 3 files changed, 79 insertions(+), 6 deletions(-)

--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -399,6 +399,16 @@ static int hid_submit_ctrl(struct hid_de
  * Output interrupt completion handler.
  */
 
+static int irq_out_pump_restart(struct hid_device *hid)
+{
+	struct usbhid_device *usbhid = hid->driver_data;
+
+	if (usbhid->outhead != usbhid->outtail)
+		return hid_submit_out(hid);
+	else
+		return -1;
+}
+
 static void hid_irq_out(struct urb *urb)
 {
 	struct hid_device *hid = urb->context;
@@ -428,7 +438,7 @@ static void hid_irq_out(struct urb *urb)
 	else
 		usbhid->outtail = (usbhid->outtail + 1) & (HID_OUTPUT_FIFO_SIZE - 1);
 
-	if (usbhid->outhead != usbhid->outtail && !hid_submit_out(hid)) {
+	if (!irq_out_pump_restart(hid)) {
 		/* Successfully submitted next urb in queue */
 		spin_unlock_irqrestore(&usbhid->lock, flags);
 		return;
@@ -443,6 +453,15 @@ static void hid_irq_out(struct urb *urb)
 /*
  * Control pipe completion handler.
  */
+static int ctrl_pump_restart(struct hid_device *hid)
+{
+	struct usbhid_device *usbhid = hid->driver_data;
+
+	if (usbhid->ctrlhead != usbhid->ctrltail)
+		return hid_submit_ctrl(hid);
+	else
+		return -1;
+}
 
 static void hid_ctrl(struct urb *urb)
 {
@@ -476,7 +495,7 @@ static void hid_ctrl(struct urb *urb)
 	else
 		usbhid->ctrltail = (usbhid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1);
 
-	if (usbhid->ctrlhead != usbhid->ctrltail && !hid_submit_ctrl(hid)) {
+	if (!ctrl_pump_restart(hid)) {
 		/* Successfully submitted next urb in queue */
 		spin_unlock(&usbhid->lock);
 		return;
@@ -535,11 +554,27 @@ static void __usbhid_submit_report(struc
 			 * the queue is known to run
 			 * but an earlier request may be stuck
 			 * we may need to time out
-			 * no race because this is called under
+			 * no race because the URB is blocked under
 			 * spinlock
 			 */
-			if (time_after(jiffies, usbhid->last_out + HZ * 5))
+			if (time_after(jiffies, usbhid->last_out + HZ * 5)) {
+				usb_block_urb(usbhid->urbout);
+				/* drop lock to not deadlock if the callback is called */
+				spin_unlock(&usbhid->lock);
 				usb_unlink_urb(usbhid->urbout);
+				spin_lock(&usbhid->lock);
+				usb_unblock_urb(usbhid->urbout);
+				/*
+				 * if the unlinking has already completed
+				 * the pump will have been stopped
+				 * it must be restarted now
+				 */
+				if (!test_bit(HID_OUT_RUNNING, &usbhid->iofl))
+					if (!irq_out_pump_restart(hid))
+						set_bit(HID_OUT_RUNNING, &usbhid->iofl);
+
+
+			}
 		}
 		return;
 	}
@@ -583,11 +618,25 @@ static void __usbhid_submit_report(struc
 		 * the queue is known to run
 		 * but an earlier request may be stuck
 		 * we may need to time out
-		 * no race because this is called under
+		 * no race because the URB is blocked under
 		 * spinlock
 		 */
-		if (time_after(jiffies, usbhid->last_ctrl + HZ * 5))
+		if (time_after(jiffies, usbhid->last_ctrl + HZ * 5)) {
+			usb_block_urb(usbhid->urbctrl);
+			/* drop lock to not deadlock if the callback is called */
+			spin_unlock(&usbhid->lock);
 			usb_unlink_urb(usbhid->urbctrl);
+			spin_lock(&usbhid->lock);
+			usb_unblock_urb(usbhid->urbctrl);
+			/*
+			 * if the unlinking has already completed
+			 * the pump will have been stopped
+			 * it must be restarted now
+			 */
+			if (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl))
+				if (!ctrl_pump_restart(hid))
+					set_bit(HID_CTRL_RUNNING, &usbhid->iofl);
+		}
 	}
 }
 
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -671,6 +671,27 @@ void usb_unpoison_urb(struct urb *urb)
 EXPORT_SYMBOL_GPL(usb_unpoison_urb);
 
 /**
+ * usb_block_urb - reliably prevent further use of an URB
+ * @urb: pointer to URB to be blocked, may be NULL
+ *
+ * After the routine has run, attempts to resubmit the URB will fail
+ * with error -EPERM.  Thus even if the URB's completion handler always
+ * tries to resubmit, it will not succeed and the URB will become idle.
+ *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ */
+void usb_block_urb(struct urb *urb)
+{
+	if (!urb)
+		return;
+
+	atomic_inc(&urb->reject);
+}
+EXPORT_SYMBOL_GPL(usb_block_urb);
+
+/**
  * usb_kill_anchored_urbs - cancel transfer requests en masse
  * @anchor: anchor the requests are bound to
  *
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1371,6 +1371,7 @@ extern int usb_unlink_urb(struct urb *ur
 extern void usb_kill_urb(struct urb *urb);
 extern void usb_poison_urb(struct urb *urb);
 extern void usb_unpoison_urb(struct urb *urb);
+extern void usb_block_urb(struct urb *urb);
 extern void usb_kill_anchored_urbs(struct usb_anchor *anchor);
 extern void usb_poison_anchored_urbs(struct usb_anchor *anchor);
 extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor);
@@ -1383,6 +1384,8 @@ extern struct urb *usb_get_from_anchor(s
 extern void usb_scuttle_anchored_urbs(struct usb_anchor *anchor);
 extern int usb_anchor_empty(struct usb_anchor *anchor);
 
+#define usb_unblock_urb	usb_unpoison_urb
+
 /**
  * usb_urb_dir_in - check if an URB describes an IN transfer
  * @urb: URB to be checked

[ 33/94] HID: logitech: read all 32 bits of report type bitfield

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jonathan Nieder <jrnieder@gmail.com>

commit 44d27f7dfedd9aadc082cda31462f6600f56e4ec upstream.

On big-endian systems (e.g., Apple PowerBook), trying to use a
logitech wireless mouse with the Logitech Unifying Receiver does not
work with v3.2 and later kernels.  The device doesn't show up in
/dev/input.  Older kernels work fine.

That is because the new hid-logitech-dj driver claims the device.  The
device arrival notification appears:

	20 00 41 02 00 00 00 00 00 00 00 00 00 00 00

and we read the report_types bitfield (02 00 00 00) to find out what
kind of device it is.  Unfortunately the driver only reads the first 8
bits and treats that value as a 32-bit little-endian number, so on a
powerpc the report type seems to be 0x02000000 and is not recognized.

Even on little-endian machines, connecting a media center remote
control (report type 00 01 00 00) with this driver loaded would
presumably fail for the same reason.

Fix both problems by using get_unaligned_le32() to read all four
bytes, which is a little clearer anyway.  After this change, the
wireless mouse works on Hugo's PowerBook again.

Based on a patch by Nestor Lopez Casado.
Addresses http://bugs.debian.org/671292

Reported-by: Hugo Osvaldo Barrera <hugo@osvaldobarrera.com.ar>
Inspired-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/hid-logitech-dj.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -26,6 +26,7 @@
 #include <linux/hid.h>
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <asm/unaligned.h>
 #include "usbhid/usbhid.h"
 #include "hid-ids.h"
 #include "hid-logitech-dj.h"
@@ -265,8 +266,8 @@ static void logi_dj_recv_add_djhid_devic
 		goto dj_device_allocate_fail;
 	}
 
-	dj_dev->reports_supported = le32_to_cpu(
-		dj_report->report_params[DEVICE_PAIRED_RF_REPORT_TYPE]);
+	dj_dev->reports_supported = get_unaligned_le32(
+		dj_report->report_params + DEVICE_PAIRED_RF_REPORT_TYPE);
 	dj_dev->hdev = dj_hiddev;
 	dj_dev->dj_receiver_dev = djrcv_dev;
 	dj_dev->device_index = dj_report->device_index;

[ 34/94] um: Fix __swp_type()

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Weinberger <richard@nod.at>

commit 2b76ebaa728f8a3967c52aa189261c72fe56a6f1 upstream.

The current __swp_type() function uses a too small bitshift.
Using more than one swap files causes bad pages because
the type bits clash with other page flags.

Analyzed-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/um/include/asm/pgtable.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/um/include/asm/pgtable.h
+++ b/arch/um/include/asm/pgtable.h
@@ -346,11 +346,11 @@ extern pte_t *virt_to_pte(struct mm_stru
 #define update_mmu_cache(vma,address,ptep) do ; while (0)
 
 /* Encode and de-code a swap entry */
-#define __swp_type(x)			(((x).val >> 4) & 0x3f)
+#define __swp_type(x)			(((x).val >> 5) & 0x1f)
 #define __swp_offset(x)			((x).val >> 11)
 
 #define __swp_entry(type, offset) \
-	((swp_entry_t) { ((type) << 4) | ((offset) << 11) })
+	((swp_entry_t) { ((type) << 5) | ((offset) << 11) })
 #define __pte_to_swp_entry(pte) \
 	((swp_entry_t) { pte_val(pte_mkuptodate(pte)) })
 #define __swp_entry_to_pte(x)		((pte_t) { (x).val })

[ 35/94] um: Implement a custom pte_same() function

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Weinberger <richard@nod.at>

commit f15b9000eb1d09bbaa4b0a6b2089d7e1f64e84b3 upstream.

UML uses the _PAGE_NEWPAGE flag to mark pages which are not jet
installed on the host side using mmap().
pte_same() has to ignore this flag, otherwise unuse_pte_range()
is unable to unuse the page because two identical
page tables entries with different _PAGE_NEWPAGE flags would not
match and swapoff() would never return.

Analyzed-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/um/include/asm/pgtable.h |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/arch/um/include/asm/pgtable.h
+++ b/arch/um/include/asm/pgtable.h
@@ -271,6 +271,12 @@ static inline void set_pte(pte_t *pteptr
 }
 #define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
 
+#define __HAVE_ARCH_PTE_SAME
+static inline int pte_same(pte_t pte_a, pte_t pte_b)
+{
+	return !((pte_val(pte_a) ^ pte_val(pte_b)) & ~_PAGE_NEWPAGE);
+}
+
 /*
  * Conversion functions: convert a page and protection to a page entry,
  * and a page entry and page directory to the page they refer to.

[ 36/94] docs: update HOWTO for 2.6.x -> 3.x versioning

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit 591bfc6bf9e5e25e464fd4c87d64afd5135667c4 upstream.

The HOWTO document needed updating for the new kernel versioning. The
git URI for -next was updated as well.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/HOWTO |   32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -218,16 +218,16 @@ The development process
 Linux kernel development process currently consists of a few different
 main kernel "branches" and lots of different subsystem-specific kernel
 branches.  These different branches are:
-  - main 2.6.x kernel tree
-  - 2.6.x.y -stable kernel tree
-  - 2.6.x -git kernel patches
+  - main 3.x kernel tree
+  - 3.x.y -stable kernel tree
+  - 3.x -git kernel patches
   - subsystem specific kernel trees and patches
-  - the 2.6.x -next kernel tree for integration tests
+  - the 3.x -next kernel tree for integration tests
 
-2.6.x kernel tree
+3.x kernel tree
 -----------------
-2.6.x kernels are maintained by Linus Torvalds, and can be found on
-kernel.org in the pub/linux/kernel/v2.6/ directory.  Its development
+3.x kernels are maintained by Linus Torvalds, and can be found on
+kernel.org in the pub/linux/kernel/v3.x/ directory.  Its development
 process is as follows:
   - As soon as a new kernel is released a two weeks window is open,
     during this period of time maintainers can submit big diffs to
@@ -262,20 +262,20 @@ mailing list about kernel releases:
 	released according to perceived bug status, not according to a
 	preconceived timeline."
 
-2.6.x.y -stable kernel tree
+3.x.y -stable kernel tree
 ---------------------------
-Kernels with 4-part versions are -stable kernels. They contain
+Kernels with 3-part versions are -stable kernels. They contain
 relatively small and critical fixes for security problems or significant
-regressions discovered in a given 2.6.x kernel.
+regressions discovered in a given 3.x kernel.
 
 This is the recommended branch for users who want the most recent stable
 kernel and are not interested in helping test development/experimental
 versions.
 
-If no 2.6.x.y kernel is available, then the highest numbered 2.6.x
+If no 3.x.y kernel is available, then the highest numbered 3.x
 kernel is the current stable kernel.
 
-2.6.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
+3.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
 are released as needs dictate.  The normal release period is approximately
 two weeks, but it can be longer if there are no pressing problems.  A
 security-related problem, instead, can cause a release to happen almost
@@ -285,7 +285,7 @@ The file Documentation/stable_kernel_rul
 documents what kinds of changes are acceptable for the -stable tree, and
 how the release process works.
 
-2.6.x -git patches
+3.x -git patches
 ------------------
 These are daily snapshots of Linus' kernel tree which are managed in a
 git repository (hence the name.) These patches are usually released
@@ -317,13 +317,13 @@ revisions to it, and maintainers can mar
 accepted, or rejected.  Most of these patchwork sites are listed at
 http://patchwork.kernel.org/.
 
-2.6.x -next kernel tree for integration tests
+3.x -next kernel tree for integration tests
 ---------------------------------------------
-Before updates from subsystem trees are merged into the mainline 2.6.x
+Before updates from subsystem trees are merged into the mainline 3.x
 tree, they need to be integration-tested.  For this purpose, a special
 testing repository exists into which virtually all subsystem trees are
 pulled on an almost daily basis:
-	http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git
+	http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git
 	http://linux.f-seidel.de/linux-next/pmwiki/
 
 This way, the -next kernel gives a summary outlook onto what will be

[ 37/94] swap: dont do discard if no discard option added

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shaohua Li <shli@kernel.org>

commit 052b1987faca3606109d88d96bce124851f7c4c2 upstream.

When swapon() was not passed the SWAP_FLAG_DISCARD option, sys_swapon()
will still perform a discard operation.  This can cause problems if
discard is slow or buggy.

Reverse the order of the check so that a discard operation is performed
only if the sys_swapon() caller is attempting to enable discard.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Reported-by: Holger Kiehl <Holger.Kiehl@dwd.de>
Tested-by: Holger Kiehl <Holger.Kiehl@dwd.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: William Dauchy <wdauchy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/swapfile.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -2103,7 +2103,7 @@ SYSCALL_DEFINE2(swapon, const char __use
 			p->flags |= SWP_SOLIDSTATE;
 			p->cluster_next = 1 + (random32() % p->highest_bit);
 		}
-		if (discard_swap(p) == 0 && (swap_flags & SWAP_FLAG_DISCARD))
+		if ((swap_flags & SWAP_FLAG_DISCARD) && discard_swap(p) == 0)
 			p->flags |= SWP_DISCARDABLE;
 	}
 

[ 38/94] USB: cdc-wdm: sanitize error returns

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Neukum <oliver@neukum.org>

commit 24a85bae5da2b43fed423859c09c5a81ab359473 upstream.

wdm_flush() returns unsanitized USB error codes.
They must be cleaned up to before being anded to user space

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-wdm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -500,7 +500,7 @@ static int wdm_flush(struct file *file,
 		dev_err(&desc->intf->dev, "Error in flush path: %d\n",
 			desc->werr);
 
-	return desc->werr;
+	return usb_translate_errors(desc->werr);
 }
 
 static unsigned int wdm_poll(struct file *file, struct poll_table_struct *wait)

[ 39/94] USB: cdc-wdm: poll must return POLLHUP if device is gone

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 869 bytes --]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit 616b6937e348ef2b4c6ea5fef2cd3c441145efb0 upstream.

Else the poll will be restarted indefinitely in a tight loop,
preventing final device cleanup.

Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-wdm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -511,7 +511,7 @@ static unsigned int wdm_poll(struct file
 
 	spin_lock_irqsave(&desc->iuspin, flags);
 	if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
-		mask = POLLERR;
+		mask = POLLHUP | POLLERR;
 		spin_unlock_irqrestore(&desc->iuspin, flags);
 		goto desc_out;
 	}

[ 40/94] workqueue: skip nr_running sanity check in worker_enter_idle() if trustee is active

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 544ecf310f0e7f51fa057ac2a295fc1b3b35a9d3 upstream.

worker_enter_idle() has WARN_ON_ONCE() which triggers if nr_running
isn't zero when every worker is idle.  This can trigger spuriously
while a cpu is going down due to the way trustee sets %WORKER_ROGUE
and zaps nr_running.

It first sets %WORKER_ROGUE on all workers without updating
nr_running, releases gcwq->lock, schedules, regrabs gcwq->lock and
then zaps nr_running.  If the last running worker enters idle
inbetween, it would see stale nr_running which hasn't been zapped yet
and trigger the WARN_ON_ONCE().

Fix it by performing the sanity check iff the trustee is idle.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/workqueue.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1215,8 +1215,13 @@ static void worker_enter_idle(struct wor
 	} else
 		wake_up_all(&gcwq->trustee_wait);
 
-	/* sanity check nr_running */
-	WARN_ON_ONCE(gcwq->nr_workers == gcwq->nr_idle &&
+	/*
+	 * Sanity check nr_running.  Because trustee releases gcwq->lock
+	 * between setting %WORKER_ROGUE and zapping nr_running, the
+	 * warning may trigger spuriously.  Check iff trustee is idle.
+	 */
+	WARN_ON_ONCE(gcwq->trustee_state == TRUSTEE_DONE &&
+		     gcwq->nr_workers == gcwq->nr_idle &&
 		     atomic_read(get_gcwq_nr_running(gcwq->cpu)));
 }
 

[ 41/94] mm: mempolicy: Let vma_merge and vma_split handle vma->vm_policy linkages

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mel Gorman <mgorman@suse.de>

commit 05f144a0d5c2207a0349348127f996e104ad7404 upstream.

Dave Jones' system call fuzz testing tool "trinity" triggered the
following bug error with slab debugging enabled

    =============================================================================
    BUG numa_policy (Not tainted): Poison overwritten
    -----------------------------------------------------------------------------

    INFO: 0xffff880146498250-0xffff880146498250. First byte 0x6a instead of 0x6b
    INFO: Allocated in mpol_new+0xa3/0x140 age=46310 cpu=6 pid=32154
     __slab_alloc+0x3d3/0x445
     kmem_cache_alloc+0x29d/0x2b0
     mpol_new+0xa3/0x140
     sys_mbind+0x142/0x620
     system_call_fastpath+0x16/0x1b
    INFO: Freed in __mpol_put+0x27/0x30 age=46268 cpu=6 pid=32154
     __slab_free+0x2e/0x1de
     kmem_cache_free+0x25a/0x260
     __mpol_put+0x27/0x30
     remove_vma+0x68/0x90
     exit_mmap+0x118/0x140
     mmput+0x73/0x110
     exit_mm+0x108/0x130
     do_exit+0x162/0xb90
     do_group_exit+0x4f/0xc0
     sys_exit_group+0x17/0x20
     system_call_fastpath+0x16/0x1b
    INFO: Slab 0xffffea0005192600 objects=27 used=27 fp=0x          (null) flags=0x20000000004080
    INFO: Object 0xffff880146498250 @offset=592 fp=0xffff88014649b9d0

This implied a reference counting bug and the problem happened during
mbind().

mbind() applies a new memory policy to a range and uses mbind_range() to
merge existing VMAs or split them as necessary.  In the event of splits,
mpol_dup() will allocate a new struct mempolicy and maintain existing
reference counts whose rules are documented in
Documentation/vm/numa_memory_policy.txt .

The problem occurs with shared memory policies.  The vm_op->set_policy
increments the reference count if necessary and split_vma() and
vma_merge() have already handled the existing reference counts.
However, policy_vma() screws it up by replacing an existing
vma->vm_policy with one that potentially has the wrong reference count
leading to a premature free.  This patch removes the damage caused by
policy_vma().

With this patch applied Dave's trinity tool runs an mbind test for 5
minutes without error.  /proc/slabinfo reported that there are no
numa_policy or shared_policy_node objects allocated after the test
completed and the shared memory region was deleted.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Dave Jones <davej@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Stephen Wilson <wilsons@start.ca>
Cc: Christoph Lameter <cl@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/mempolicy.c |   41 +++++++++++++++++------------------------
 1 file changed, 17 insertions(+), 24 deletions(-)

--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -607,27 +607,6 @@ check_range(struct mm_struct *mm, unsign
 	return first;
 }
 
-/* Apply policy to a single VMA */
-static int policy_vma(struct vm_area_struct *vma, struct mempolicy *new)
-{
-	int err = 0;
-	struct mempolicy *old = vma->vm_policy;
-
-	pr_debug("vma %lx-%lx/%lx vm_ops %p vm_file %p set_policy %p\n",
-		 vma->vm_start, vma->vm_end, vma->vm_pgoff,
-		 vma->vm_ops, vma->vm_file,
-		 vma->vm_ops ? vma->vm_ops->set_policy : NULL);
-
-	if (vma->vm_ops && vma->vm_ops->set_policy)
-		err = vma->vm_ops->set_policy(vma, new);
-	if (!err) {
-		mpol_get(new);
-		vma->vm_policy = new;
-		mpol_put(old);
-	}
-	return err;
-}
-
 /* Step 2: apply policy to a range and do splits. */
 static int mbind_range(struct mm_struct *mm, unsigned long start,
 		       unsigned long end, struct mempolicy *new_pol)
@@ -676,9 +655,23 @@ static int mbind_range(struct mm_struct
 			if (err)
 				goto out;
 		}
-		err = policy_vma(vma, new_pol);
-		if (err)
-			goto out;
+
+		/*
+		 * Apply policy to a single VMA. The reference counting of
+		 * policy for vma_policy linkages has already been handled by
+		 * vma_merge and split_vma as necessary. If this is a shared
+		 * policy then ->set_policy will increment the reference count
+		 * for an sp node.
+		 */
+		pr_debug("vma %lx-%lx/%lx vm_ops %p vm_file %p set_policy %p\n",
+			vma->vm_start, vma->vm_end, vma->vm_pgoff,
+			vma->vm_ops, vma->vm_file,
+			vma->vm_ops ? vma->vm_ops->set_policy : NULL);
+		if (vma->vm_ops && vma->vm_ops->set_policy) {
+			err = vma->vm_ops->set_policy(vma, new_pol);
+			if (err)
+				goto out;
+		}
 	}
 
  out:

[ 42/94] md: using GFP_NOIO to allocate bio for flush request

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shaohua Li <shli@kernel.org>

commit b5e1b8cee7ad58a15d2fa79bcd7946acb592602d upstream.

A flush request is usually issued in transaction commit code path, so
using GFP_KERNEL to allocate memory for flush request bio falls into
the classic deadlock issue.

This is suitable for any -stable kernel to which it applies as it
avoids a possible deadlock.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/md.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -452,7 +452,7 @@ static void submit_flushes(struct work_s
 			atomic_inc(&rdev->nr_pending);
 			atomic_inc(&rdev->nr_pending);
 			rcu_read_unlock();
-			bi = bio_alloc_mddev(GFP_KERNEL, 0, mddev);
+			bi = bio_alloc_mddev(GFP_NOIO, 0, mddev);
 			bi->bi_end_io = md_end_flush;
 			bi->bi_private = rdev;
 			bi->bi_bdev = rdev->bdev;

[ 43/94] Add missing call to uart_update_timeout()

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 868 bytes --]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lothar Waßmann <LW@KARO-electronics.de>

commit 8b979f7c6bf13a57e7b6002f1175312a44773960 upstream.

This patch fixes a problem reported here:
http://article.gmane.org/gmane.linux.ports.arm.kernel/155242/match=auart

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/mxs-auart.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -369,6 +369,8 @@ static void mxs_auart_settermios(struct
 
 	writel(ctrl, u->membase + AUART_LINECTRL);
 	writel(ctrl2, u->membase + AUART_CTRL2);
+
+	uart_update_timeout(u, termios->c_cflag, baud);
 }
 
 static irqreturn_t mxs_auart_irq_handle(int irq, void *context)

[ 44/94] 8250_pci: fix pch uart matching

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnaud Patard <apatard@hupstream.com>

commit aaa10eb1d0034eccc096f583fe308f0921617598 upstream.

The rules used to make 8250_pci "ignore" the PCH uarts are lacking pci subids
entries, preventing it to match and thus is breaking serial port support for
theses systems.

This has been tested on a nanoETXexpress-TT, which has a specifici uart clock.

Tested-by: Erwan Velu <Erwan.Velu@zodiacaerospace.com>
[stable@: please apply to 3.0-stable, 3.2-stable and 3.3-stable]
Signed-off-by: Arnaud Patard <apatard@hupstream.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_pci.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1609,54 +1609,72 @@ static struct pci_serial_quirk pci_seria
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8811,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8812,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8813,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8814,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x8027,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x8028,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x8029,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x800C,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x800D,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},

[ 45/94] tty: Allow uart_register/unregister/register

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Cox <alan@linux.intel.com>

commit 1e66cded334e6cea596c72f6f650eec351b1e959 upstream.

This is legitimate but because we don't clear the drv->state pointer in the
unregister code causes a bogus BUG().

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42880
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/serial_core.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2283,6 +2283,7 @@ void uart_unregister_driver(struct uart_
 	tty_unregister_driver(p);
 	put_tty_driver(p);
 	kfree(drv->state);
+	drv->state = NULL;
 	drv->tty_driver = NULL;
 }
 

[ 46/94] USB: ftdi-sio: add support for Physik Instrumente E-861

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1699 bytes --]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Éric Piel <piel@delmic.com>

commit b69cc672052540e8efb1368420f10d7d4d8b8a3d upstream.

This adds VID/PID for the PI E-861. Without it, I had to do:
modprobe -q ftdi-sio product=0x1008 vendor=0x1a72

http://www.physikinstrumente.com/en/products/prdetail.php?sortnr=900610

Signed-off-by: Éric Piel <piel@delmic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    8 ++++++++
 2 files changed, 9 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -809,6 +809,7 @@ static struct usb_device_id id_table_com
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
 	{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+	{ USB_DEVICE(PI_VID, PI_E861_PID) },
 	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -785,6 +785,14 @@
 #define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
 #define RTSYSTEMS_CT29B_PID		0x9e54	/* CT29B Radio Cable */
 
+
+/*
+ * Physik Instrumente
+ * http://www.physikinstrumente.com/en/products/
+ */
+#define PI_VID              0x1a72  /* Vendor ID */
+#define PI_E861_PID         0x1008  /* E-861 piezo controller USB connection */
+
 /*
  * Bayer Ascensia Contour blood glucose meter USB-converter cable.
  * http://winglucofacts.com/cables/

[ 47/94] usb-storage: unusual_devs entry for Yarvik PMP400 MP4 player

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit df767b71e5816692134d59c0c17e0f77cd73333d upstream.

This patch (as1553) adds an unusual_dev entrie for the Yarvik PMP400
MP4 music player.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Jesse Feddema <jdfeddema@gmail.com>
Tested-by: Jesse Feddema <jdfeddema@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/storage/unusual_devs.h |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1885,6 +1885,13 @@ UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Jesse Feddema <jdfeddema@gmail.com> */
+UNUSUAL_DEV(  0x177f, 0x0400, 0x0000, 0x0000,
+		"Yarvik",
+		"PMP400",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
+
 /* Reported by Hans de Goede <hdegoede@redhat.com>
  * These Appotech controllers are found in Picture Frames, they provide a
  * (buggy) emulation of a cdrom drive which contains the windows software

[ 48/94] USB: ffs-test: fix length argument of out function call

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthias Fend <Matthias.Fend@wolfvision.net>

commit eb9c5836384cd2a276254df6254ed71117983626 upstream.

The out functions should only handle actual available data instead of the complete buffer.
Otherwise for example the ep0_consume function will report ghost events since it tries to decode
the complete buffer - which may contain partly invalid data.

Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/usb/ffs-test.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/usb/ffs-test.c
+++ b/tools/usb/ffs-test.c
@@ -324,7 +324,7 @@ static void *start_thread_helper(void *a
 
 		ret = t->in(t, t->buf, t->buf_size);
 		if (ret > 0) {
-			ret = t->out(t, t->buf, t->buf_size);
+			ret = t->out(t, t->buf, ret);
 			name = out_name;
 			op = "write";
 		} else {

[ 49/94] drivers/rtc/rtc-pl031.c: configure correct wday for 2000-01-01

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com>

commit c0a5f4a05af588a0f9951f8d24e2564b09501918 upstream.

The reset date of the ST Micro version of PL031 is 2000-01-01.  The
correct weekday for 2000-01-01 is saturday, but pl031 is initialized to
sunday.  This may lead to alarm malfunction, so configure the correct
wday if RTC_DR indicates reset.

Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Mattias Wallin <mattias.wallin@stericsson.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/rtc/rtc-pl031.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -312,6 +312,7 @@ static int pl031_probe(struct amba_devic
 	int ret;
 	struct pl031_local *ldata;
 	struct rtc_class_ops *ops = id->data;
+	unsigned long time;
 
 	ret = amba_request_regions(adev, NULL);
 	if (ret)
@@ -343,6 +344,23 @@ static int pl031_probe(struct amba_devic
 		writel(readl(ldata->base + RTC_CR) | RTC_CR_CWEN,
 		       ldata->base + RTC_CR);
 
+	/*
+	 * On ST PL031 variants, the RTC reset value does not provide correct
+	 * weekday for 2000-01-01. Correct the erroneous sunday to saturday.
+	 */
+	if (ldata->hw_designer == AMBA_VENDOR_ST) {
+		if (readl(ldata->base + RTC_YDR) == 0x2000) {
+			time = readl(ldata->base + RTC_DR);
+			if ((time &
+			     (RTC_MON_MASK | RTC_MDAY_MASK | RTC_WDAY_MASK))
+			    == 0x02120000) {
+				time = time | (0x7 << RTC_WDAY_SHIFT);
+				writel(0x2000, ldata->base + RTC_YLR);
+				writel(time, ldata->base + RTC_LR);
+			}
+		}
+	}
+
 	ldata->rtc = rtc_device_register("pl031", &adev->dev, ops,
 					THIS_MODULE);
 	if (IS_ERR(ldata->rtc)) {

[ 50/94] SCSI: hpsa: Fix problem with MSA2xxx devices

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>

commit 9bc3711cbb67ac620bf09b4a147cbab45b2c36c0 upstream.

Upgraded firmware on Smart Array P7xx (and some others) made them show up as
SCSI revision 5 devices and this caused the driver to fail to map MSA2xxx
logical drives to the correct bus/target/lun.  A symptom of this would be that
the target ID of the logical drives as presented by the external storage array
is ignored, and all such logical drives are assigned to target zero,
differentiated only by LUN.  Some multipath software reportedly does not deal
well with this behavior, failing to recognize different paths to the same
device as such.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Scott Teel <scott.teel@hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/hpsa.c |   34 +++++++++++++++-------------------
 1 file changed, 15 insertions(+), 19 deletions(-)

--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1676,30 +1676,26 @@ static void figure_bus_target_lun(struct
 
 	if (is_logical_dev_addr_mode(lunaddrbytes)) {
 		/* logical device */
-		if (unlikely(is_scsi_rev_5(h))) {
-			/* p1210m, logical drives lun assignments
-			 * match SCSI REPORT LUNS data.
+		lunid = le32_to_cpu(*((__le32 *) lunaddrbytes));
+		if (is_msa2xxx(h, device)) {
+			/* msa2xxx way, put logicals on bus 1
+			 * and match target/lun numbers box
+			 * reports.
 			 */
-			lunid = le32_to_cpu(*((__le32 *) lunaddrbytes));
-			*bus = 0;
-			*target = 0;
-			*lun = (lunid & 0x3fff) + 1;
+			*bus = 1;
+			*target = (lunid >> 16) & 0x3fff;
+			*lun = lunid & 0x00ff;
 		} else {
-			/* not p1210m... */
-			lunid = le32_to_cpu(*((__le32 *) lunaddrbytes));
-			if (is_msa2xxx(h, device)) {
-				/* msa2xxx way, put logicals on bus 1
-				 * and match target/lun numbers box
-				 * reports.
-				 */
-				*bus = 1;
-				*target = (lunid >> 16) & 0x3fff;
-				*lun = lunid & 0x00ff;
+			if (likely(is_scsi_rev_5(h))) {
+				/* All current smart arrays (circa 2011) */
+				*bus = 0;
+				*target = 0;
+				*lun = (lunid & 0x3fff) + 1;
 			} else {
-				/* Traditional smart array way. */
+				/* Traditional old smart array way. */
 				*bus = 0;
-				*lun = 0;
 				*target = lunid & 0x3fff;
+				*lun = 0;
 			}
 		}
 	} else {

[ 51/94] udlfb: fix hcd_buffer_free panic on unplug/replug

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bernie Thompson <bernie@plugable.com>

commit 8d21547d3c9c3bc653261f26d554cfabc4a083de upstream.

Fix race conditions with unplug/replug behavior, in particular
take care not to hold up USB probe/disconnect for long-running
framebuffer operations and rely on usb to handle teardown.

Fix for kernel panic reported with new F17 multiseat support.

Reported-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/udlfb.c |  146 +++++++++++++++++++++++++++-----------------------
 include/video/udlfb.h |    1 
 2 files changed, 81 insertions(+), 66 deletions(-)

--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -918,10 +918,6 @@ static void dlfb_free(struct kref *kref)
 {
 	struct dlfb_data *dev = container_of(kref, struct dlfb_data, kref);
 
-	/* this function will wait for all in-flight urbs to complete */
-	if (dev->urbs.count > 0)
-		dlfb_free_urb_list(dev);
-
 	if (dev->backing_buffer)
 		vfree(dev->backing_buffer);
 
@@ -940,35 +936,42 @@ static void dlfb_release_urb_work(struct
 	up(&unode->dev->urbs.limit_sem);
 }
 
-static void dlfb_free_framebuffer_work(struct work_struct *work)
+static void dlfb_free_framebuffer(struct dlfb_data *dev)
 {
-	struct dlfb_data *dev = container_of(work, struct dlfb_data,
-					     free_framebuffer_work.work);
 	struct fb_info *info = dev->info;
-	int node = info->node;
 
-	unregister_framebuffer(info);
+	if (info) {
+		int node = info->node;
 
-	if (info->cmap.len != 0)
-		fb_dealloc_cmap(&info->cmap);
-	if (info->monspecs.modedb)
-		fb_destroy_modedb(info->monspecs.modedb);
-	if (info->screen_base)
-		vfree(info->screen_base);
+		unregister_framebuffer(info);
 
-	fb_destroy_modelist(&info->modelist);
+		if (info->cmap.len != 0)
+			fb_dealloc_cmap(&info->cmap);
+		if (info->monspecs.modedb)
+			fb_destroy_modedb(info->monspecs.modedb);
+		if (info->screen_base)
+			vfree(info->screen_base);
+
+		fb_destroy_modelist(&info->modelist);
 
-	dev->info = 0;
+		dev->info = NULL;
 
-	/* Assume info structure is freed after this point */
-	framebuffer_release(info);
+		/* Assume info structure is freed after this point */
+		framebuffer_release(info);
 
-	pr_warn("fb_info for /dev/fb%d has been freed\n", node);
+		pr_warn("fb_info for /dev/fb%d has been freed\n", node);
+	}
 
 	/* ref taken in probe() as part of registering framebfufer */
 	kref_put(&dev->kref, dlfb_free);
 }
 
+static void dlfb_free_framebuffer_work(struct work_struct *work)
+{
+	struct dlfb_data *dev = container_of(work, struct dlfb_data,
+					     free_framebuffer_work.work);
+	dlfb_free_framebuffer(dev);
+}
 /*
  * Assumes caller is holding info->lock mutex (for open and release at least)
  */
@@ -1570,14 +1573,15 @@ success:
 	kfree(buf);
 	return true;
 }
+
+static void dlfb_init_framebuffer_work(struct work_struct *work);
+
 static int dlfb_usb_probe(struct usb_interface *interface,
 			const struct usb_device_id *id)
 {
 	struct usb_device *usbdev;
 	struct dlfb_data *dev = 0;
-	struct fb_info *info = 0;
 	int retval = -ENOMEM;
-	int i;
 
 	/* usb initialization */
 
@@ -1589,9 +1593,7 @@ static int dlfb_usb_probe(struct usb_int
 		goto error;
 	}
 
-	/* we need to wait for both usb and fbdev to spin down on disconnect */
 	kref_init(&dev->kref); /* matching kref_put in usb .disconnect fn */
-	kref_get(&dev->kref); /* matching kref_put in free_framebuffer_work */
 
 	dev->udev = usbdev;
 	dev->gdev = &usbdev->dev; /* our generic struct device * */
@@ -1619,10 +1621,39 @@ static int dlfb_usb_probe(struct usb_int
 		goto error;
 	}
 
+	kref_get(&dev->kref); /* matching kref_put in free_framebuffer_work */
+
 	/* We don't register a new USB class. Our client interface is fbdev */
 
+	/* Workitem keep things fast & simple during USB enumeration */
+	INIT_DELAYED_WORK(&dev->init_framebuffer_work,
+			  dlfb_init_framebuffer_work);
+	schedule_delayed_work(&dev->init_framebuffer_work, 0);
+
+	return 0;
+
+error:
+	if (dev) {
+
+		kref_put(&dev->kref, dlfb_free); /* ref for framebuffer */
+		kref_put(&dev->kref, dlfb_free); /* last ref from kref_init */
+
+		/* dev has been deallocated. Do not dereference */
+	}
+
+	return retval;
+}
+
+static void dlfb_init_framebuffer_work(struct work_struct *work)
+{
+	struct dlfb_data *dev = container_of(work, struct dlfb_data,
+					     init_framebuffer_work.work);
+	struct fb_info *info;
+	int retval;
+	int i;
+
 	/* allocates framebuffer driver structure, not framebuffer memory */
-	info = framebuffer_alloc(0, &interface->dev);
+	info = framebuffer_alloc(0, dev->gdev);
 	if (!info) {
 		retval = -ENOMEM;
 		pr_err("framebuffer_alloc failed\n");
@@ -1668,15 +1699,13 @@ static int dlfb_usb_probe(struct usb_int
 	for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++) {
 		retval = device_create_file(info->dev, &fb_device_attrs[i]);
 		if (retval) {
-			pr_err("device_create_file failed %d\n", retval);
-			goto err_del_attrs;
+			pr_warn("device_create_file failed %d\n", retval);
 		}
 	}
 
 	retval = device_create_bin_file(info->dev, &edid_attr);
 	if (retval) {
-		pr_err("device_create_bin_file failed %d\n", retval);
-		goto err_del_attrs;
+		pr_warn("device_create_bin_file failed %d\n", retval);
 	}
 
 	pr_info("DisplayLink USB device /dev/fb%d attached. %dx%d resolution."
@@ -1684,38 +1713,10 @@ static int dlfb_usb_probe(struct usb_int
 			info->var.xres, info->var.yres,
 			((dev->backing_buffer) ?
 			info->fix.smem_len * 2 : info->fix.smem_len) >> 10);
-	return 0;
-
-err_del_attrs:
-	for (i -= 1; i >= 0; i--)
-		device_remove_file(info->dev, &fb_device_attrs[i]);
+	return;
 
 error:
-	if (dev) {
-
-		if (info) {
-			if (info->cmap.len != 0)
-				fb_dealloc_cmap(&info->cmap);
-			if (info->monspecs.modedb)
-				fb_destroy_modedb(info->monspecs.modedb);
-			if (info->screen_base)
-				vfree(info->screen_base);
-
-			fb_destroy_modelist(&info->modelist);
-
-			framebuffer_release(info);
-		}
-
-		if (dev->backing_buffer)
-			vfree(dev->backing_buffer);
-
-		kref_put(&dev->kref, dlfb_free); /* ref for framebuffer */
-		kref_put(&dev->kref, dlfb_free); /* last ref from kref_init */
-
-		/* dev has been deallocated. Do not dereference */
-	}
-
-	return retval;
+	dlfb_free_framebuffer(dev);
 }
 
 static void dlfb_usb_disconnect(struct usb_interface *interface)
@@ -1735,12 +1736,24 @@ static void dlfb_usb_disconnect(struct u
 	/* When non-active we'll update virtual framebuffer, but no new urbs */
 	atomic_set(&dev->usb_active, 0);
 
-	/* remove udlfb's sysfs interfaces */
-	for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++)
-		device_remove_file(info->dev, &fb_device_attrs[i]);
-	device_remove_bin_file(info->dev, &edid_attr);
-	unlink_framebuffer(info);
+	/* this function will wait for all in-flight urbs to complete */
+	dlfb_free_urb_list(dev);
+
+	if (info) {
+
+		/* remove udlfb's sysfs interfaces */
+		for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++)
+			device_remove_file(info->dev, &fb_device_attrs[i]);
+		device_remove_bin_file(info->dev, &edid_attr);
+
+		/* it's safe to uncomment next line if your kernel
+		   doesn't yet have this function exported */
+		unlink_framebuffer(info);
+	}
+
 	usb_set_intfdata(interface, NULL);
+	dev->udev = NULL;
+	dev->gdev = NULL;
 
 	/* if clients still have us open, will be freed on last close */
 	if (dev->fb_count == 0)
@@ -1806,12 +1819,12 @@ static void dlfb_free_urb_list(struct dl
 	int ret;
 	unsigned long flags;
 
-	pr_notice("Waiting for completes and freeing all render urbs\n");
+	pr_notice("Freeing all render urbs\n");
 
 	/* keep waiting and freeing, until we've got 'em all */
 	while (count--) {
 
-		/* Getting interrupted means a leak, but ok at shutdown*/
+		/* Getting interrupted means a leak, but ok at disconnect */
 		ret = down_interruptible(&dev->urbs.limit_sem);
 		if (ret)
 			break;
@@ -1833,6 +1846,7 @@ static void dlfb_free_urb_list(struct dl
 		kfree(node);
 	}
 
+	dev->urbs.count = 0;
 }
 
 static int dlfb_alloc_urb_list(struct dlfb_data *dev, int count, size_t size)
--- a/include/video/udlfb.h
+++ b/include/video/udlfb.h
@@ -41,6 +41,7 @@ struct dlfb_data {
 	char *backing_buffer;
 	int fb_count;
 	bool virtualized; /* true when physical usb device not present */
+	struct delayed_work init_framebuffer_work;
 	struct delayed_work free_framebuffer_work;
 	atomic_t usb_active; /* 0 = update virtual buffer, but no usb traffic */
 	atomic_t lost_pixels; /* 1 = a render op failed. Need screen refresh */

[ 52/94] usb: usbtest: two super speed fixes for usbtest

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Zimmerman <Paul.Zimmerman@synopsys.com>

commit 6a23ccd216b6a8ba2c67a9f9d8969b4431ad2920 upstream.

bMaxPacketSize0 field for super speed is a power of 2, not a count.
The size itself is always 512.

Max packet size for a super speed bulk endpoint is 1024, so
allocate the urb size in halt_simple() accordingly.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/misc/usbtest.c |   17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1025,7 +1025,10 @@ test_ctrl_queue(struct usbtest_dev *dev,
 		case 13:	/* short read, resembling case 10 */
 			req.wValue = cpu_to_le16((USB_DT_CONFIG << 8) | 0);
 			/* last data packet "should" be DATA1, not DATA0 */
-			len = 1024 - udev->descriptor.bMaxPacketSize0;
+			if (udev->speed == USB_SPEED_SUPER)
+				len = 1024 - 512;
+			else
+				len = 1024 - udev->descriptor.bMaxPacketSize0;
 			expected = -EREMOTEIO;
 			break;
 		case 14:	/* short read; try to fill the last packet */
@@ -1384,11 +1387,15 @@ static int test_halt(struct usbtest_dev
 
 static int halt_simple(struct usbtest_dev *dev)
 {
-	int		ep;
-	int		retval = 0;
-	struct urb	*urb;
+	int			ep;
+	int			retval = 0;
+	struct urb		*urb;
+	struct usb_device	*udev = testdev_to_usbdev(dev);
 
-	urb = simple_alloc_urb(testdev_to_usbdev(dev), 0, 512);
+	if (udev->speed == USB_SPEED_SUPER)
+		urb = simple_alloc_urb(udev, 0, 1024);
+	else
+		urb = simple_alloc_urb(udev, 0, 512);
 	if (urb == NULL)
 		return -ENOMEM;
 

[ 53/94] USB: ohci-at91: add a reset function to fix race condition

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Ferre <nicolas.ferre@atmel.com>

commit 07e4e556eff4938eb2edf2591de3aa7d7fb82b52 upstream.

A possible race condition appears because we are not initializing
the ohci->regs before calling usb_hcd_request_irqs().
We move the call to ohci_init() in hcd->driver->reset() instead of
hcd->driver->start() to fix this.
This was experienced when we share the same IRQ line between OHCI and EHCI
controllers.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Christian Eggers <christian.eggers@kathrein.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/ohci-at91.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -217,7 +217,7 @@ static void usb_hcd_at91_remove(struct u
 /*-------------------------------------------------------------------------*/
 
 static int __devinit
-ohci_at91_start (struct usb_hcd *hcd)
+ohci_at91_reset (struct usb_hcd *hcd)
 {
 	struct at91_usbh_data	*board = hcd->self.controller->platform_data;
 	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
@@ -227,6 +227,14 @@ ohci_at91_start (struct usb_hcd *hcd)
 		return ret;
 
 	ohci->num_ports = board->ports;
+	return 0;
+}
+
+static int __devinit
+ohci_at91_start (struct usb_hcd *hcd)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+	int			ret;
 
 	if ((ret = ohci_run(ohci)) < 0) {
 		err("can't start %s", hcd->self.bus_name);
@@ -410,6 +418,7 @@ static const struct hc_driver ohci_at91_
 	/*
 	 * basic lifecycle operations
 	 */
+	.reset =		ohci_at91_reset,
 	.start =		ohci_at91_start,
 	.stop =			ohci_stop,
 	.shutdown =		ohci_shutdown,

[ 54/94] USB: Remove races in devio.c

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Huajun Li <huajun.li.lee@gmail.com>

commit 4e09dcf20f7b5358615514c2ec8584b248ab8874 upstream.

There exist races in devio.c, below is one case,
and there are similar races in destroy_async()
and proc_unlinkurb().  Remove these races.

 cancel_bulk_urbs()        async_completed()
-------------------                -----------------------
 spin_unlock(&ps->lock);

                           list_move_tail(&as->asynclist,
		                    &ps->async_completed);

                           wake_up(&ps->wait);

                           Lead to free_async() be triggered,
                           then urb and 'as' will be freed.

 usb_unlink_urb(as->urb);
 ===> refer to the freed 'as'

Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Oncaphillis <oncaphillis@snafu.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/devio.c |   33 +++++++++++++++++++++++++--------
 1 file changed, 25 insertions(+), 8 deletions(-)

--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -333,17 +333,14 @@ static struct async *async_getcompleted(
 static struct async *async_getpending(struct dev_state *ps,
 					     void __user *userurb)
 {
-	unsigned long flags;
 	struct async *as;
 
-	spin_lock_irqsave(&ps->lock, flags);
 	list_for_each_entry(as, &ps->async_pending, asynclist)
 		if (as->userurb == userurb) {
 			list_del_init(&as->asynclist);
-			spin_unlock_irqrestore(&ps->lock, flags);
 			return as;
 		}
-	spin_unlock_irqrestore(&ps->lock, flags);
+
 	return NULL;
 }
 
@@ -398,6 +395,7 @@ static void cancel_bulk_urbs(struct dev_
 __releases(ps->lock)
 __acquires(ps->lock)
 {
+	struct urb *urb;
 	struct async *as;
 
 	/* Mark all the pending URBs that match bulk_addr, up to but not
@@ -420,8 +418,11 @@ __acquires(ps->lock)
 	list_for_each_entry(as, &ps->async_pending, asynclist) {
 		if (as->bulk_status == AS_UNLINK) {
 			as->bulk_status = 0;		/* Only once */
+			urb = as->urb;
+			usb_get_urb(urb);
 			spin_unlock(&ps->lock);		/* Allow completions */
-			usb_unlink_urb(as->urb);
+			usb_unlink_urb(urb);
+			usb_put_urb(urb);
 			spin_lock(&ps->lock);
 			goto rescan;
 		}
@@ -472,6 +473,7 @@ static void async_completed(struct urb *
 
 static void destroy_async(struct dev_state *ps, struct list_head *list)
 {
+	struct urb *urb;
 	struct async *as;
 	unsigned long flags;
 
@@ -479,10 +481,13 @@ static void destroy_async(struct dev_sta
 	while (!list_empty(list)) {
 		as = list_entry(list->next, struct async, asynclist);
 		list_del_init(&as->asynclist);
+		urb = as->urb;
+		usb_get_urb(urb);
 
 		/* drop the spinlock so the completion handler can run */
 		spin_unlock_irqrestore(&ps->lock, flags);
-		usb_kill_urb(as->urb);
+		usb_kill_urb(urb);
+		usb_put_urb(urb);
 		spin_lock_irqsave(&ps->lock, flags);
 	}
 	spin_unlock_irqrestore(&ps->lock, flags);
@@ -1410,12 +1415,24 @@ static int proc_submiturb(struct dev_sta
 
 static int proc_unlinkurb(struct dev_state *ps, void __user *arg)
 {
+	struct urb *urb;
 	struct async *as;
+	unsigned long flags;
 
+	spin_lock_irqsave(&ps->lock, flags);
 	as = async_getpending(ps, arg);
-	if (!as)
+	if (!as) {
+		spin_unlock_irqrestore(&ps->lock, flags);
 		return -EINVAL;
-	usb_kill_urb(as->urb);
+	}
+
+	urb = as->urb;
+	usb_get_urb(urb);
+	spin_unlock_irqrestore(&ps->lock, flags);
+
+	usb_kill_urb(urb);
+	usb_put_urb(urb);
+
 	return 0;
 }
 

[ 55/94] USB: serial: ti_usb_3410_5052: Add support for the FRI2 serial console

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Darren Hart <dvhart@linux.intel.com>

commit 975dc33b82cb887d75a29b1e3835c8eb063a8e99 upstream.

The Kontron M2M development board, also known as the Fish River Island II,
has an optional daughter card providing access to the PCH_UART (EG20T) via
a ti_usb_3410_5052 uart to usb chip.

http://us.kontron.com/products/systems+and+platforms/m2m/m2m+smart+services+developer+kit.html

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Al Borchers <alborchers@steinerpoint.com>
CC: Peter Berger <pberger@brimson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ti_usb_3410_5052.c |    6 ++++--
 drivers/usb/serial/ti_usb_3410_5052.h |    1 +
 2 files changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -165,7 +165,7 @@ static unsigned int product_5052_count;
 /* the array dimension is the number of default entries plus */
 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 /* null entry */
-static struct usb_device_id ti_id_table_3410[14+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[15+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -180,6 +180,7 @@ static struct usb_device_id ti_id_table_
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
 	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
+	{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
@@ -189,7 +190,7 @@ static struct usb_device_id ti_id_table_
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 };
 
-static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_combined[19+2*TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -208,6 +209,7 @@ static struct usb_device_id ti_id_table_
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
 	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
+	{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
 	{ }
 };
 
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -37,6 +37,7 @@
 #define TI_5152_BOOT_PRODUCT_ID		0x5152	/* no EEPROM, no firmware */
 #define TI_5052_EEPROM_PRODUCT_ID	0x505A	/* EEPROM, no firmware */
 #define TI_5052_FIRMWARE_PRODUCT_ID	0x505F	/* firmware is running */
+#define FRI2_PRODUCT_ID			0x5053  /* Fish River Island II */
 
 /* Multi-Tech vendor and product ids */
 #define MTS_VENDOR_ID			0x06E0

[ 56/94] usb: gadget: fsl_udc_core: dTDs next dtd pointer need to be updated once written

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Chen <peter.chen@freescale.com>

commit 4d0947dec4db1224354e2f6f00ae22ce38e62a43 upstream.

dTD's next dtd pointer need to be updated once CPU writes it, or this
request may not be handled by controller, then host will get NAK from
device forever.

This problem occurs when there is a request is handling, we need to add
a new request to dTD list, if this new request is added before the current
one is finished, the new request is intended to added as next dtd pointer
at current dTD, but without wmb(), the dTD's next dtd pointer may not be
updated when the controller reads it. In that case, the controller will
still get Terminate Bit is 1 at dTD's next dtd pointer, that means there is
no next request, then this new request is missed by controller.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Li Yang <leoli@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/fsl_udc_core.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -737,6 +737,8 @@ static void fsl_queue_td(struct fsl_ep *
 		lastreq = list_entry(ep->queue.prev, struct fsl_req, queue);
 		lastreq->tail->next_td_ptr =
 			cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK);
+		/* Ensure dTD's next dtd pointer to be updated */
+		wmb();
 		/* Read prime bit, if 1 goto done */
 		if (fsl_readl(&dr_regs->endpointprime) & bitmask)
 			return;

[ 57/94] usb: add USB_QUIRK_RESET_RESUME for M-Audio 88es

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1032 bytes --]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: =?UTF-8?q?Steffen=20M=C3=BCller?= <steffen.mueller@radio-frei.de>

commit 166cb70e97bd83d7ae9bbec6ae59a178fd9bb823 upstream.

Tested-by: Steffen Müller <steffen.mueller@radio-frei.de>
Signed-off-by: Steffen Müller <steffen.mueller@radio-frei.de>
Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/quirks.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -123,6 +123,9 @@ static const struct usb_device_id usb_qu
 	/* Guillemot Webcam Hercules Dualpix Exchange*/
 	{ USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Midiman M-Audio Keystation 88es */
+	{ USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 

[ 58/94] xhci: Add Lynx Point to list of Intel switchable hosts.

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit 1c12443ab8eba71a658fae4572147e56d1f84f66 upstream.

The upcoming Intel Lynx Point chipset includes an xHCI host controller
that can have ports switched from the EHCI host controller, just like
the Intel Panther Point xHCI host.  This time, ports from both EHCI
hosts can be switched to the xHCI host controller.  The PCI config
registers to do the port switching are in the exact same place in the
xHCI PCI configuration registers, with the same semantics.

Hooray for shipping patches for next-gen hardware before the current gen
hardware is even available for purchase!

This patch should be backported to stable kernels as old as 3.0,
that contain commit 69e848c2090aebba5698a1620604c7dccb448684
"Intel xhci: Support EHCI/xHCI port switching."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/ehci-pci.c   |    4 +++-
 drivers/usb/host/pci-quirks.c |   18 +++++++++++++++++-
 2 files changed, 20 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -368,7 +368,9 @@ static bool usb_is_intel_switchable_ehci
 {
 	return pdev->class == PCI_CLASS_SERIAL_USB_EHCI &&
 		pdev->vendor == PCI_VENDOR_ID_INTEL &&
-		pdev->device == 0x1E26;
+		(pdev->device == 0x1E26 ||
+		 pdev->device == 0x8C2D ||
+		 pdev->device == 0x8C26);
 }
 
 static void ehci_enable_xhci_companion(void)
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -712,12 +712,28 @@ static int handshake(void __iomem *ptr,
 	return -ETIMEDOUT;
 }
 
-bool usb_is_intel_switchable_xhci(struct pci_dev *pdev)
+#define PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI	0x8C31
+
+bool usb_is_intel_ppt_switchable_xhci(struct pci_dev *pdev)
 {
 	return pdev->class == PCI_CLASS_SERIAL_USB_XHCI &&
 		pdev->vendor == PCI_VENDOR_ID_INTEL &&
 		pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI;
 }
+
+/* The Intel Lynx Point chipset also has switchable ports. */
+bool usb_is_intel_lpt_switchable_xhci(struct pci_dev *pdev)
+{
+	return pdev->class == PCI_CLASS_SERIAL_USB_XHCI &&
+		pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI;
+}
+
+bool usb_is_intel_switchable_xhci(struct pci_dev *pdev)
+{
+	return usb_is_intel_ppt_switchable_xhci(pdev) ||
+		usb_is_intel_lpt_switchable_xhci(pdev);
+}
 EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci);
 
 /*

[ 59/94] xhci: Avoid dead ports when CONFIG_USB_XHCI_HCD=n

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit 51c9e6c7732b67769c0a514d31f505e49fa82dd4 upstream.

If the user chooses to say "no" to CONFIG_USB_XHCI_HCD on a system
with an Intel Panther Point chipset, the PCI quirks code or the EHCI
driver will switch the ports over to the xHCI host, but the xHCI driver
will never load.  The ports will be powered off and seem "dead" to the
user.

Fix this by only switching the ports over if CONFIG_USB_XHCI_HCD is
either compiled in, or compiled as a module.

This patch should be backported to stable kernels as old as 3.0,
that contain commit 69e848c2090aebba5698a1620604c7dccb448684
"Intel xhci: Support EHCI/xHCI port switching."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Eric Anholt <eric.anholt@intel.com>
Reported-by: David Bein <d.bein@f5.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/pci-quirks.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/kconfig.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
@@ -758,6 +759,19 @@ void usb_enable_xhci_ports(struct pci_de
 {
 	u32		ports_available;
 
+	/* Don't switchover the ports if the user hasn't compiled the xHCI
+	 * driver.  Otherwise they will see "dead" USB ports that don't power
+	 * the devices.
+	 */
+	if (!IS_ENABLED(CONFIG_USB_XHCI_HCD)) {
+		dev_warn(&xhci_pdev->dev,
+				"CONFIG_USB_XHCI_HCD is turned off, "
+				"defaulting to EHCI.\n");
+		dev_warn(&xhci_pdev->dev,
+				"USB 3.0 devices will work at USB 2.0 speeds.\n");
+		return;
+	}
+
 	ports_available = 0xffffffff;
 	/* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
 	 * Register, to turn on SuperSpeed terminations for all

[ 60/94] usb-xhci: Handle COMP_TX_ERR for isoc tds

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 9c745995ae5c4ff787f34a359de908facc11ee00 upstream.

While testing unplugging an UVC HD webcam with usb-redirection (so through
usbdevfs), my userspace usb-redir code was getting a value of -1 in
iso_frame_desc[n].status, which according to Documentation/usb/error-codes.txt
is not a valid value.

The source of this -1 is the default case in xhci-ring.c:process_isoc_td()
adding a kprintf there showed the value of trb_comp_code to be COMP_TX_ERR
in this case, so this patch adds handling for that completion code to
process_isoc_td().

This was observed and tested with the following xhci controller:
1033:0194 NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)

Note: I also wonder if setting frame->status to -1 (-EPERM) is the best we can
do, but since I cannot come up with anything better I've left that as is.

This patch should be backported to kernels as old as 2.6.36, which contain the
commit 04e51901dd44f40a5a385ced897f6bca87d5f40a "USB: xHCI: Isochronous
transfer implementation".

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-ring.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1739,6 +1739,7 @@ static int process_isoc_td(struct xhci_h
 		break;
 	case COMP_DEV_ERR:
 	case COMP_STALL:
+	case COMP_TX_ERR:
 		frame->status = -EPROTO;
 		skip_td = true;
 		break;

[ 61/94] xhci: Reset reserved command ring TRBs on cleanup.

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit 33b2831ac870d50cc8e01c317b07fb1e69c13fe1 upstream.

When the xHCI driver needs to clean up memory (perhaps due to a failed
register restore on resume from S3 or resume from S4), it needs to reset
the number of reserved TRBs on the command ring to zero.  Otherwise,
several resume cycles (about 30) with a UAS device attached will
continually increment the number of reserved TRBs, until all command
submissions fail because there isn't enough room on the command ring.

This patch should be backported to kernels as old as 2.6.32,
that contain the commit 913a8a344ffcaf0b4a586d6662a2c66a7106557d
"USB: xhci: Change how xHCI commands are handled."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-mem.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1701,6 +1701,7 @@ void xhci_mem_cleanup(struct xhci_hcd *x
 	xhci->event_ring = NULL;
 	xhci_dbg(xhci, "Freed event ring\n");
 
+	xhci->cmd_ring_reserved_trbs = 0;
 	if (xhci->cmd_ring)
 		xhci_ring_free(xhci, xhci->cmd_ring);
 	xhci->cmd_ring = NULL;

[ 62/94] xhci: Add new short TX quirk for Fresco Logic host.

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit 1530bbc6272d9da1e39ef8e06190d42c13a02733 upstream.

Sergio reported that when he recorded audio from a USB headset mic
plugged into the USB 3.0 port on his ASUS N53SV-DH72, the audio sounded
"robotic".  When plugged into the USB 2.0 port under EHCI on the same
laptop, the audio sounded fine.  The device is:

Bus 002 Device 004: ID 046d:0a0c Logitech, Inc. Clear Chat Comfort USB Headset

The problem was tracked down to the Fresco Logic xHCI host controller
not correctly reporting short transfers on isochronous IN endpoints.
The driver would submit a 96 byte transfer, the device would only send
88 or 90 bytes, and the xHCI host would report the transfer had a
"successful" completion code, with an untransferred buffer length of 8
or 6 bytes.

The successful completion code and non-zero untransferred length is a
contradiction.  The xHCI host is supposed to only mark a transfer as
successful if all the bytes are transferred.  Otherwise, the transfer
should be marked with a short packet completion code.  Without the EHCI
bus trace, we wouldn't know whether the xHCI driver should trust the
completion code or the untransferred length.  With it, we know to trust
the untransferred length.

Add a new xHCI quirk for the Fresco Logic host controller.  If a
transfer is reported as successful, but the untransferred length is
non-zero, print a warning.  For the Fresco Logic host, change the
completion code to COMP_SHORT_TX and process the transfer like a short
transfer.

This should be backported to stable kernels that contain the commit
f5182b4155b9d686c5540a6822486400e34ddd98 "xhci: Disable MSI for some
Fresco Logic hosts."  That commit was marked for stable kernels as old
as 2.6.36.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Sergio Correia <lists@uece.net>
Tested-by: Sergio Correia <lists@uece.net>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-pci.c  |    1 +
 drivers/usb/host/xhci-ring.c |   20 +++++++++++++++++---
 drivers/usb/host/xhci.h      |    1 +
 3 files changed, 19 insertions(+), 3 deletions(-)

--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -72,6 +72,7 @@ static void xhci_pci_quirks(struct devic
 		xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
 				"has broken MSI implementation\n",
 				pdev->revision);
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_NEC)
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1722,8 +1722,12 @@ static int process_isoc_td(struct xhci_h
 	/* handle completion code */
 	switch (trb_comp_code) {
 	case COMP_SUCCESS:
-		frame->status = 0;
-		break;
+		if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) {
+			frame->status = 0;
+			break;
+		}
+		if ((xhci->quirks & XHCI_TRUST_TX_LENGTH))
+			trb_comp_code = COMP_SHORT_TX;
 	case COMP_SHORT_TX:
 		frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ?
 				-EREMOTEIO : 0;
@@ -1820,13 +1824,16 @@ static int process_bulk_intr_td(struct x
 	switch (trb_comp_code) {
 	case COMP_SUCCESS:
 		/* Double check that the HW transferred everything. */
-		if (event_trb != td->last_trb) {
+		if (event_trb != td->last_trb ||
+				TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
 			xhci_warn(xhci, "WARN Successful completion "
 					"on short TX\n");
 			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
 				*status = -EREMOTEIO;
 			else
 				*status = 0;
+			if ((xhci->quirks & XHCI_TRUST_TX_LENGTH))
+				trb_comp_code = COMP_SHORT_TX;
 		} else {
 			*status = 0;
 		}
@@ -1985,6 +1992,13 @@ static int handle_tx_event(struct xhci_h
 	 * transfer type
 	 */
 	case COMP_SUCCESS:
+		if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
+			break;
+		if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
+			trb_comp_code = COMP_SHORT_TX;
+		else
+			xhci_warn(xhci, "WARN Successful completion on short TX: "
+					"needs XHCI_TRUST_TX_LENGTH quirk?\n");
 	case COMP_SHORT_TX:
 		break;
 	case COMP_STOP:
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1466,6 +1466,7 @@ struct xhci_hcd {
 #define XHCI_RESET_ON_RESUME	(1 << 7)
 #define	XHCI_SW_BW_CHECKING	(1 << 8)
 #define XHCI_AMD_0x96_HOST	(1 << 9)
+#define XHCI_TRUST_TX_LENGTH	(1 << 10)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */

[ 63/94] USB: fix resource leak in xhci power loss path

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Neukum <oneukum@suse.de>

commit f8a9e72d125f4e00ec529ba67b674321a1f3bf31 upstream.

Some more data structures must be freed and counters
reset if an XHCI controller has lost power. The failure
to do so renders some chips inoperative after a certain number
of S4 cycles.

This patch should be backported to kernels as old as 3.2,
that contain the commits c29eea621900f18287d50519f72cb9113746d75a
"xhci: Implement HS/FS/LS bandwidth checking." and
commit 839c817ce67178ca3c7c7ad534c571bba1e69ebe
"xhci: Implement HS/FS/LS bandwidth checking."

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-mem.c |   26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1685,6 +1685,14 @@ void xhci_mem_cleanup(struct xhci_hcd *x
 {
 	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 	struct dev_info	*dev_info, *next;
+	struct list_head *tt_list_head;
+	struct list_head *tt;
+	struct list_head *endpoints;
+	struct list_head *ep, *q;
+	struct xhci_tt_bw_info *tt_info;
+	struct xhci_interval_bw_table *bwt;
+	struct xhci_virt_ep *virt_ep;
+
 	unsigned long	flags;
 	int size;
 	int i;
@@ -1744,8 +1752,26 @@ void xhci_mem_cleanup(struct xhci_hcd *x
 	}
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
+	bwt = &xhci->rh_bw->bw_table;
+	for (i = 0; i < XHCI_MAX_INTERVAL; i++) {
+		endpoints = &bwt->interval_bw[i].endpoints;
+		list_for_each_safe(ep, q, endpoints) {
+			virt_ep = list_entry(ep, struct xhci_virt_ep, bw_endpoint_list);
+			list_del(&virt_ep->bw_endpoint_list);
+			kfree(virt_ep);
+		}
+	}
+
+	tt_list_head = &xhci->rh_bw->tts;
+	list_for_each_safe(tt, q, tt_list_head) {
+		tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
+		list_del(tt);
+		kfree(tt_info);
+	}
+
 	xhci->num_usb2_ports = 0;
 	xhci->num_usb3_ports = 0;
+	xhci->num_active_eps = 0;
 	kfree(xhci->usb2_ports);
 	kfree(xhci->usb3_ports);
 	kfree(xhci->port_array);

[ 64/94] usbcore: enable USB2 LPM if port suspend fails

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andiry Xu <andiry.xu@gmail.com>

commit c3e751e4f4754793bb52bd5ae30e9cc027edbb12 upstream.

USB2 LPM is disabled when device begin to suspend and enabled after device
is resumed. That's because USB spec does not define the transition from
U1/U2 state to U3 state.

If usb_port_suspend() fails, usb_port_resume() is never called, and USB2 LPM
is disabled in this situation. Enable USB2 LPM if port suspend fails.

This patch should be backported to kernels as old as 3.2, that contain
the commit 65580b4321eb36f16ae8b5987bfa1bb948fc5112 "xHCI: set USB2
hardware LPM".

Signed-off-by: Andiry Xu <andiry.xu@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2419,6 +2419,10 @@ int usb_port_suspend(struct usb_device *
 				NULL, 0,
 				USB_CTRL_SET_TIMEOUT);
 
+		/* Try to enable USB2 hardware LPM again */
+		if (udev->usb2_hw_lpm_capable == 1)
+			usb_set_usb2_hardware_lpm(udev, 1);
+
 		/* System sleep transitions should never fail */
 		if (!PMSG_IS_AUTO(msg))
 			status = 0;

[ 65/94] gma500: Fix Poulsbo suspend/resume crash on devices with SDVO ports

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1243 bytes --]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Cox <alan@linux.intel.com>

commit 7beff62ee39d3ccf088bb77f61a63037f714d235 upstream.

Reported-by: Guillaume Clément <guillaume@baobob.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/gma500/psb_device.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/gma500/psb_device.c
+++ b/drivers/gpu/drm/gma500/psb_device.c
@@ -196,7 +196,8 @@ static int psb_save_display_registers(st
 	}
 
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
-		connector->funcs->save(connector);
+		if (connector->funcs->save)
+			connector->funcs->save(connector);
 
 	mutex_unlock(&dev->mode_config.mutex);
 	return 0;
@@ -233,7 +234,8 @@ static int psb_restore_display_registers
 			crtc->funcs->restore(crtc);
 
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
-		connector->funcs->restore(connector);
+		if (connector->funcs->restore)
+			connector->funcs->restore(connector);
 
 	mutex_unlock(&dev->mode_config.mutex);
 	return 0;

[ 66/94] b43legacy: Fix error due to MMIO access with SSB unpowered

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 8f4b20388fa77226a3605627a33a23f90d559e50 upstream.

There is a dummy read of a PCI MMIO register that occurs before the SSB bus
has been powered, which is an error. This bug has not been seen earlier,
but was apparently exposed when udev was updated to version 182.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/b43legacy/main.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -1564,8 +1564,6 @@ static int b43legacy_request_firmware(st
 	const char *filename;
 	int err;
 
-	/* do dummy read */
-	ssb_read32(dev->dev, SSB_TMSHIGH);
 	if (!fw->ucode) {
 		if (rev == 2)
 			filename = "ucode2";

[ 67/94] drm/i915: Avoid a double-read of PCH_IIR during interrupt handling

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Wilson <chris@chris-wilson.co.uk>

commit 9adab8b5a7fde248504f484e197589f3e3c922e2 upstream.

Currently the code re-reads PCH_IIR during the hotplug interrupt
processing. Not only is this a wasted read, but introduces a potential
for handling a spurious interrupt as we then may not clear all the
interrupts processed (since the re-read IIR may contains more interrupts
asserted than we clear using the result of the original read).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_irq.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -424,14 +424,11 @@ static void gen6_pm_rps_work(struct work
 	mutex_unlock(&dev_priv->dev->struct_mutex);
 }
 
-static void pch_irq_handler(struct drm_device *dev)
+static void pch_irq_handler(struct drm_device *dev, u32 pch_iir)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	u32 pch_iir;
 	int pipe;
 
-	pch_iir = I915_READ(SDEIIR);
-
 	if (pch_iir & SDE_AUDIO_POWER_MASK)
 		DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
 				 (pch_iir & SDE_AUDIO_POWER_MASK) >>
@@ -529,7 +526,7 @@ static irqreturn_t ivybridge_irq_handler
 	if (de_iir & DE_PCH_EVENT_IVB) {
 		if (pch_iir & SDE_HOTPLUG_MASK_CPT)
 			queue_work(dev_priv->wq, &dev_priv->hotplug_work);
-		pch_irq_handler(dev);
+		pch_irq_handler(dev, pch_iir);
 	}
 
 	if (pm_iir & GEN6_PM_DEFERRED_EVENTS) {
@@ -629,7 +626,7 @@ static irqreturn_t ironlake_irq_handler(
 	if (de_iir & DE_PCH_EVENT) {
 		if (pch_iir & hotplug_mask)
 			queue_work(dev_priv->wq, &dev_priv->hotplug_work);
-		pch_irq_handler(dev);
+		pch_irq_handler(dev, pch_iir);
 	}
 
 	if (de_iir & DE_PCU_EVENT) {

[ 68/94] drm/i915: [GEN7] Use HW scheduler for fixed function shaders

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Widawsky <ben@bwidawsk.net>

commit a1e969e0332de7a430e62822cee8f2ec8d83cd7c upstream.

This originally started as a patch from Bernard as a way of simply
setting the VS scheduler. After submitting the RFC patch, we decided to
also modify the DS scheduler. To be most explicit, I've made the patch
explicitly set all scheduler modes, and included the defines for other
modes (in case someone feels frisky later).

The rest of the story gets a bit weird. The first version of the patch
showed an almost unbelievable performance improvement. Since rebasing my
branch it appears the performance improvement has gone, unfortunately.
But setting these bits seem to be the right thing to do given that the
docs describe corruption that can occur with the default settings.

In summary, I am seeing no more perf improvements (or regressions) in my
limited testing, but we believe this should be set to prevent rendering
corruption, therefore cc stable.

v1: Clear bit 4 also (Ken + Eugeni)
Do a full clear + set of the bits we want (Me).

Cc: Bernard Kilarski <bernard.r.kilarski@intel.com>
Reviewed-by (RFC): Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_reg.h      |   15 +++++++++++++++
 drivers/gpu/drm/i915/intel_display.c |   14 ++++++++++++++
 2 files changed, 29 insertions(+)

--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -570,6 +570,21 @@
 
 #define GEN6_BSD_RNCID			0x12198
 
+#define GEN7_FF_THREAD_MODE		0x20a0
+#define   GEN7_FF_SCHED_MASK		0x0077070
+#define   GEN7_FF_TS_SCHED_HS1		(0x5<<16)
+#define   GEN7_FF_TS_SCHED_HS0		(0x3<<16)
+#define   GEN7_FF_TS_SCHED_LOAD_BALANCE	(0x1<<16)
+#define   GEN7_FF_TS_SCHED_HW		(0x0<<16) /* Default */
+#define   GEN7_FF_VS_SCHED_HS1		(0x5<<12)
+#define   GEN7_FF_VS_SCHED_HS0		(0x3<<12)
+#define   GEN7_FF_VS_SCHED_LOAD_BALANCE	(0x1<<12) /* Default */
+#define   GEN7_FF_VS_SCHED_HW		(0x0<<12)
+#define   GEN7_FF_DS_SCHED_HS1		(0x5<<4)
+#define   GEN7_FF_DS_SCHED_HS0		(0x3<<4)
+#define   GEN7_FF_DS_SCHED_LOAD_BALANCE	(0x1<<4)  /* Default */
+#define   GEN7_FF_DS_SCHED_HW		(0x0<<4)
+
 /*
  * Framebuffer compression (915+ only)
  */
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8467,6 +8467,18 @@ static void gen6_init_clock_gating(struc
 	}
 }
 
+static void gen7_setup_fixed_func_scheduler(struct drm_i915_private *dev_priv)
+{
+	uint32_t reg = I915_READ(GEN7_FF_THREAD_MODE);
+
+	reg &= ~GEN7_FF_SCHED_MASK;
+	reg |= GEN7_FF_TS_SCHED_HW;
+	reg |= GEN7_FF_VS_SCHED_HW;
+	reg |= GEN7_FF_DS_SCHED_HW;
+
+	I915_WRITE(GEN7_FF_THREAD_MODE, reg);
+}
+
 static void ivybridge_init_clock_gating(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -8511,6 +8523,8 @@ static void ivybridge_init_clock_gating(
 			   DISPPLANE_TRICKLE_FEED_DISABLE);
 		intel_flush_display_plane(dev_priv, pipe);
 	}
+
+	gen7_setup_fixed_func_scheduler(dev_priv);
 }
 
 static void g4x_init_clock_gating(struct drm_device *dev)

[ 69/94] drm/i915: dont clobber the pipe param in sanitize_modesetting

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit a9dcf84b14ef4e9a609910367576995e6f32f3dc upstream.

... we need it later on in the function to clean up pipe <-> plane
associations. This regression has been introduced in

commit f47166d2b0001fcb752b40c5a2d4db986dfbea68
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Mar 22 15:00:50 2012 +0000

    drm/i915: Sanitize BIOS debugging bits from PIPECONF

Spotted by staring at debug output of an (as it turns out) totally
unrelated bug.

v2: I've totally failed to do the s/pipe/i/ correctly, spotted by
Chris Wilson.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/intel_display.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7496,10 +7496,11 @@ static void intel_sanitize_modesetting(s
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 reg, val;
+	int i;
 
 	/* Clear any frame start delays used for debugging left by the BIOS */
-	for_each_pipe(pipe) {
-		reg = PIPECONF(pipe);
+	for_each_pipe(i) {
+		reg = PIPECONF(i);
 		I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
 	}
 

[ 70/94] gpio: mpc8xxx: Prevent NULL pointer deref in demux handler

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit d6de85e85edcc38c9edcde45a0a568818fcddc13 upstream.

commit cfadd838(powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO
driver) added an unconditional call of chip->irq_eoi() to the demux
handler.

This leads to a NULL pointer derefernce on MPC512x platforms which use
this driver as well.

Make it conditional.

Reported-by: Thomas Wucher <thwucher@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Felix Radensky <felix@embedded-sol.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpio-mpc8xxx.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -163,7 +163,8 @@ static void mpc8xxx_gpio_irq_cascade(uns
 	if (mask)
 		generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
 						     32 - ffs(mask)));
-	chip->irq_eoi(&desc->irq_data);
+	if (chip->irq_eoi)
+		chip->irq_eoi(&desc->irq_data);
 }
 
 static void mpc8xxx_irq_unmask(struct irq_data *d)

[ 71/94] spi/spi-fsl-spi: reference correct pdata in fsl_spi_cs_control

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>

commit 067aa4815a9bc12a569d8a06afef50ba5773afbf upstream.

Commit 178db7d3, "spi: Fix device unregistration when unregistering
the bus master", changed spi device initialization of dev.parent pointer
to be the master's device pointer instead of his parent.

This introduced a bug in spi-fsl-spi, since its usage of spi device
pointer was not updated accordingly. This was later fixed by commit
5039a86, "spi/mpc83xx: fix NULL pdata dereference bug", but it missed
another spot on fsl_spi_cs_control function where we also need to update
usage of spi device pointer. This change address that.

Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-fsl-spi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -931,7 +931,7 @@ err:
 
 static void fsl_spi_cs_control(struct spi_device *spi, bool on)
 {
-	struct device *dev = spi->dev.parent;
+	struct device *dev = spi->dev.parent->parent;
 	struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data);
 	u16 cs = spi->chip_select;
 	int gpio = pinfo->gpios[cs];

[ 72/94] xen: do not map the same GSI twice in PVHVM guests.

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>

commit 68c2c39a76b094e9b2773e5846424ea674bf2c46 upstream.

PV on HVM guests map GSIs into event channels. At restore time the
event channels are resumed by restore_pirqs.

Device drivers might try to register the same GSI again through ACPI at
restore time, but the GSI has already been mapped and bound by
restore_pirqs. This patch detects these situations and avoids
 mapping the same GSI multiple times.

Without this patch we get:
(XEN) irq.c:2235: dom4: pirq 23 or emuirq 28 already mapped
and waste a pirq.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/pci/xen.c   |    4 ++++
 drivers/xen/events.c |    5 +++--
 include/xen/events.h |    3 +++
 3 files changed, 10 insertions(+), 2 deletions(-)

--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -64,6 +64,10 @@ static int xen_register_pirq(u32 gsi, in
 	int shareable = 0;
 	char *name;
 
+	irq = xen_irq_from_gsi(gsi);
+	if (irq > 0)
+		return irq;
+
 	if (set_pirq)
 		pirq = gsi;
 
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -604,7 +604,7 @@ static void disable_pirq(struct irq_data
 	disable_dynirq(data);
 }
 
-static int find_irq_by_gsi(unsigned gsi)
+int xen_irq_from_gsi(unsigned gsi)
 {
 	struct irq_info *info;
 
@@ -618,6 +618,7 @@ static int find_irq_by_gsi(unsigned gsi)
 
 	return -1;
 }
+EXPORT_SYMBOL_GPL(xen_irq_from_gsi);
 
 /*
  * Do not make any assumptions regarding the relationship between the
@@ -637,7 +638,7 @@ int xen_bind_pirq_gsi_to_irq(unsigned gs
 
 	mutex_lock(&irq_mapping_update_lock);
 
-	irq = find_irq_by_gsi(gsi);
+	irq = xen_irq_from_gsi(gsi);
 	if (irq != -1) {
 		printk(KERN_INFO "xen_map_pirq_gsi: returning irq %d for gsi %u\n",
 		       irq, gsi);
--- a/include/xen/events.h
+++ b/include/xen/events.h
@@ -103,6 +103,9 @@ int xen_irq_from_pirq(unsigned pirq);
 /* Return the pirq allocated to the irq. */
 int xen_pirq_from_irq(unsigned irq);
 
+/* Return the irq allocated to the gsi */
+int xen_irq_from_gsi(unsigned gsi);
+
 /* Determine whether to ignore this IRQ if it is passed to a guest. */
 int xen_test_irq_shared(int irq);
 

[ 73/94] nouveau: nouveau_set_bo_placement takes TTM flags

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Airlie <airlied@redhat.com>

commit c284815debba2f14ee2fd07b1b4cc972ab116110 upstream.

This seems to be wrong to me, spotted while thinking about dma-buf.

Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/nouveau/nouveau_bo.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -1035,7 +1035,7 @@ nouveau_ttm_fault_reserve_notify(struct
 
 	nvbo->placement.fpfn = 0;
 	nvbo->placement.lpfn = dev_priv->fb_mappable_pages;
-	nouveau_bo_placement_set(nvbo, TTM_PL_VRAM, 0);
+	nouveau_bo_placement_set(nvbo, TTM_PL_FLAG_VRAM, 0);
 	return nouveau_bo_validate(nvbo, false, true, false);
 }
 

[ 74/94] [media] smsusb: add autodetection support for USB ID 2040:c0a0

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Krufky <mkrufky@linuxtv.org>

commit 4d1b58b84472d1d300a66e1c5fd765b21e74ba15 upstream.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/dvb/siano/smsusb.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/media/dvb/siano/smsusb.c
+++ b/drivers/media/dvb/siano/smsusb.c
@@ -542,6 +542,8 @@ static const struct usb_device_id smsusb
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
 	{ USB_DEVICE(0x2040, 0xc090),
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
+	{ USB_DEVICE(0x2040, 0xc0a0),
+		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
 	{ } /* Terminating entry */
 	};
 

[ 75/94] media: uvcvideo: Fix ENUMINPUT handling

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

commit 31c5f0c5e25ed71eeced170f113bb590f2f1f6f3 upstream.

Properly validate the user-supplied index against the number of inputs.
The code used the pin local variable instead of the index by mistake.

Reported-by: Jozef Vesely <vesely@gjh.sk>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/video/uvc/uvc_v4l2.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -686,7 +686,7 @@ static long uvc_v4l2_do_ioctl(struct fil
 					break;
 			}
 			pin = iterm->id;
-		} else if (pin < selector->bNrInPins) {
+		} else if (index < selector->bNrInPins) {
 			pin = selector->baSourceID[index];
 			list_for_each_entry(iterm, &chain->entities, chain) {
 				if (!UVC_ENTITY_IS_ITERM(iterm))

[ 76/94] x86, realmode: 16-bit real-mode code support for relocs tool

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "H. Peter Anvin" <hpa@linux.intel.com>

commit 6520fe5564acf07ade7b18a1272db1184835c487 upstream.

A new option is added to the relocs tool called '--realmode'.
This option causes the generation of 16-bit segment relocations
and 32-bit linear relocations for the real-mode code. When
the real-mode code is moved to the low-memory during kernel
initialization, these relocation entries can be used to
relocate the code properly.

In the assembly code 16-bit segment relocations must be relative
to the 'real_mode_seg' absolute symbol. Linear relocations must be
relative to a symbol prefixed with 'pa_'.

16-bit segment relocation is used to load cs:ip in 16-bit code.
Linear relocations are used in the 32-bit code for relocatable
data references. They are declared in the linker script of the
real-mode code.

The relocs tool is moved to arch/x86/tools/relocs.c, and added new
target archscripts that can be used to build scripts needed building
an architecture.  be compiled before building the arch/x86 tree.

[ hpa: accelerating this because it detects invalid absolute
  relocations, a serious bug in binutils 2.22.52.0.x which currently
  produces bad kernels. ]

[ jsakkine: applied against 3.3.7 ]

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-2-git-send-email-jarkko.sakkinen@intel.com
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Makefile                          |    9 
 arch/x86/Makefile                 |    3 
 arch/x86/boot/compressed/Makefile |    9 
 arch/x86/boot/compressed/relocs.c |  680 --------------------------------
 arch/x86/tools/.gitignore         |    1 
 arch/x86/tools/Makefile           |    4 
 arch/x86/tools/relocs.c           |  797 ++++++++++++++++++++++++++++++++++++++
 scripts/Makefile                  |    2 
 8 files changed, 817 insertions(+), 688 deletions(-)
 delete mode 100644 arch/x86/boot/compressed/relocs.c
 create mode 100644 arch/x86/tools/.gitignore
 create mode 100644 arch/x86/tools/relocs.c

--- a/Makefile
+++ b/Makefile
@@ -442,7 +442,7 @@ asm-generic:
 
 no-dot-config-targets := clean mrproper distclean \
 			 cscope gtags TAGS tags help %docs check% coccicheck \
-			 include/linux/version.h headers_% archheaders \
+			 include/linux/version.h headers_% archheaders archscripts \
 			 kernelversion %src-pkg
 
 config-targets := 0
@@ -979,7 +979,7 @@ prepare1: prepare2 include/linux/version
                    include/config/auto.conf
 	$(cmd_crmodverdir)
 
-archprepare: archheaders prepare1 scripts_basic
+archprepare: archheaders archscripts prepare1 scripts_basic
 
 prepare0: archprepare FORCE
 	$(Q)$(MAKE) $(build)=.
@@ -1049,8 +1049,11 @@ hdr-dst = $(if $(KBUILD_HEADERS), dst=in
 PHONY += archheaders
 archheaders:
 
+PHONY += archscripts
+archscripts:
+
 PHONY += __headers
-__headers: include/linux/version.h scripts_basic asm-generic archheaders FORCE
+__headers: include/linux/version.h scripts_basic asm-generic archheaders archscripts FORCE
 	$(Q)$(MAKE) $(build)=scripts build_unifdef
 
 PHONY += headers_install_all
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -117,6 +117,9 @@ KBUILD_CFLAGS += $(call cc-option,-mno-s
 KBUILD_CFLAGS += $(mflags-y)
 KBUILD_AFLAGS += $(mflags-y)
 
+archscripts:
+	$(Q)$(MAKE) $(build)=arch/x86/tools relocs
+
 ###
 # Syscall table generation
 
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -40,13 +40,12 @@ OBJCOPYFLAGS_vmlinux.bin :=  -R .comment
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
+targets += vmlinux.bin.all vmlinux.relocs
 
-targets += vmlinux.bin.all vmlinux.relocs relocs
-hostprogs-$(CONFIG_X86_NEED_RELOCS) += relocs
-
+CMD_RELOCS = arch/x86/tools/relocs
 quiet_cmd_relocs = RELOCS  $@
-      cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
-$(obj)/vmlinux.relocs: vmlinux $(obj)/relocs FORCE
+      cmd_relocs = $(CMD_RELOCS) $< > $@;$(CMD_RELOCS) --abs-relocs $<
+$(obj)/vmlinux.relocs: vmlinux FORCE
 	$(call if_changed,relocs)
 
 vmlinux.bin.all-y := $(obj)/vmlinux.bin
--- a/arch/x86/boot/compressed/relocs.c
+++ /dev/null
@@ -1,680 +0,0 @@
-#include <stdio.h>
-#include <stdarg.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <string.h>
-#include <errno.h>
-#include <unistd.h>
-#include <elf.h>
-#include <byteswap.h>
-#define USE_BSD
-#include <endian.h>
-#include <regex.h>
-
-static void die(char *fmt, ...);
-
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-static Elf32_Ehdr ehdr;
-static unsigned long reloc_count, reloc_idx;
-static unsigned long *relocs;
-
-struct section {
-	Elf32_Shdr     shdr;
-	struct section *link;
-	Elf32_Sym      *symtab;
-	Elf32_Rel      *reltab;
-	char           *strtab;
-};
-static struct section *secs;
-
-/*
- * Following symbols have been audited. There values are constant and do
- * not change if bzImage is loaded at a different physical address than
- * the address for which it has been compiled. Don't warn user about
- * absolute relocations present w.r.t these symbols.
- */
-static const char abs_sym_regex[] =
-	"^(xen_irq_disable_direct_reloc$|"
-	"xen_save_fl_direct_reloc$|"
-	"VDSO|"
-	"__crc_)";
-static regex_t abs_sym_regex_c;
-static int is_abs_reloc(const char *sym_name)
-{
-	return !regexec(&abs_sym_regex_c, sym_name, 0, NULL, 0);
-}
-
-/*
- * These symbols are known to be relative, even if the linker marks them
- * as absolute (typically defined outside any section in the linker script.)
- */
-static const char rel_sym_regex[] =
-	"^_end$";
-static regex_t rel_sym_regex_c;
-static int is_rel_reloc(const char *sym_name)
-{
-	return !regexec(&rel_sym_regex_c, sym_name, 0, NULL, 0);
-}
-
-static void regex_init(void)
-{
-        char errbuf[128];
-        int err;
-	
-        err = regcomp(&abs_sym_regex_c, abs_sym_regex,
-                      REG_EXTENDED|REG_NOSUB);
-        if (err) {
-                regerror(err, &abs_sym_regex_c, errbuf, sizeof errbuf);
-                die("%s", errbuf);
-        }
-
-        err = regcomp(&rel_sym_regex_c, rel_sym_regex,
-                      REG_EXTENDED|REG_NOSUB);
-        if (err) {
-                regerror(err, &rel_sym_regex_c, errbuf, sizeof errbuf);
-                die("%s", errbuf);
-        }
-}
-
-static void die(char *fmt, ...)
-{
-	va_list ap;
-	va_start(ap, fmt);
-	vfprintf(stderr, fmt, ap);
-	va_end(ap);
-	exit(1);
-}
-
-static const char *sym_type(unsigned type)
-{
-	static const char *type_name[] = {
-#define SYM_TYPE(X) [X] = #X
-		SYM_TYPE(STT_NOTYPE),
-		SYM_TYPE(STT_OBJECT),
-		SYM_TYPE(STT_FUNC),
-		SYM_TYPE(STT_SECTION),
-		SYM_TYPE(STT_FILE),
-		SYM_TYPE(STT_COMMON),
-		SYM_TYPE(STT_TLS),
-#undef SYM_TYPE
-	};
-	const char *name = "unknown sym type name";
-	if (type < ARRAY_SIZE(type_name)) {
-		name = type_name[type];
-	}
-	return name;
-}
-
-static const char *sym_bind(unsigned bind)
-{
-	static const char *bind_name[] = {
-#define SYM_BIND(X) [X] = #X
-		SYM_BIND(STB_LOCAL),
-		SYM_BIND(STB_GLOBAL),
-		SYM_BIND(STB_WEAK),
-#undef SYM_BIND
-	};
-	const char *name = "unknown sym bind name";
-	if (bind < ARRAY_SIZE(bind_name)) {
-		name = bind_name[bind];
-	}
-	return name;
-}
-
-static const char *sym_visibility(unsigned visibility)
-{
-	static const char *visibility_name[] = {
-#define SYM_VISIBILITY(X) [X] = #X
-		SYM_VISIBILITY(STV_DEFAULT),
-		SYM_VISIBILITY(STV_INTERNAL),
-		SYM_VISIBILITY(STV_HIDDEN),
-		SYM_VISIBILITY(STV_PROTECTED),
-#undef SYM_VISIBILITY
-	};
-	const char *name = "unknown sym visibility name";
-	if (visibility < ARRAY_SIZE(visibility_name)) {
-		name = visibility_name[visibility];
-	}
-	return name;
-}
-
-static const char *rel_type(unsigned type)
-{
-	static const char *type_name[] = {
-#define REL_TYPE(X) [X] = #X
-		REL_TYPE(R_386_NONE),
-		REL_TYPE(R_386_32),
-		REL_TYPE(R_386_PC32),
-		REL_TYPE(R_386_GOT32),
-		REL_TYPE(R_386_PLT32),
-		REL_TYPE(R_386_COPY),
-		REL_TYPE(R_386_GLOB_DAT),
-		REL_TYPE(R_386_JMP_SLOT),
-		REL_TYPE(R_386_RELATIVE),
-		REL_TYPE(R_386_GOTOFF),
-		REL_TYPE(R_386_GOTPC),
-#undef REL_TYPE
-	};
-	const char *name = "unknown type rel type name";
-	if (type < ARRAY_SIZE(type_name) && type_name[type]) {
-		name = type_name[type];
-	}
-	return name;
-}
-
-static const char *sec_name(unsigned shndx)
-{
-	const char *sec_strtab;
-	const char *name;
-	sec_strtab = secs[ehdr.e_shstrndx].strtab;
-	name = "<noname>";
-	if (shndx < ehdr.e_shnum) {
-		name = sec_strtab + secs[shndx].shdr.sh_name;
-	}
-	else if (shndx == SHN_ABS) {
-		name = "ABSOLUTE";
-	}
-	else if (shndx == SHN_COMMON) {
-		name = "COMMON";
-	}
-	return name;
-}
-
-static const char *sym_name(const char *sym_strtab, Elf32_Sym *sym)
-{
-	const char *name;
-	name = "<noname>";
-	if (sym->st_name) {
-		name = sym_strtab + sym->st_name;
-	}
-	else {
-		name = sec_name(secs[sym->st_shndx].shdr.sh_name);
-	}
-	return name;
-}
-
-
-
-#if BYTE_ORDER == LITTLE_ENDIAN
-#define le16_to_cpu(val) (val)
-#define le32_to_cpu(val) (val)
-#endif
-#if BYTE_ORDER == BIG_ENDIAN
-#define le16_to_cpu(val) bswap_16(val)
-#define le32_to_cpu(val) bswap_32(val)
-#endif
-
-static uint16_t elf16_to_cpu(uint16_t val)
-{
-	return le16_to_cpu(val);
-}
-
-static uint32_t elf32_to_cpu(uint32_t val)
-{
-	return le32_to_cpu(val);
-}
-
-static void read_ehdr(FILE *fp)
-{
-	if (fread(&ehdr, sizeof(ehdr), 1, fp) != 1) {
-		die("Cannot read ELF header: %s\n",
-			strerror(errno));
-	}
-	if (memcmp(ehdr.e_ident, ELFMAG, SELFMAG) != 0) {
-		die("No ELF magic\n");
-	}
-	if (ehdr.e_ident[EI_CLASS] != ELFCLASS32) {
-		die("Not a 32 bit executable\n");
-	}
-	if (ehdr.e_ident[EI_DATA] != ELFDATA2LSB) {
-		die("Not a LSB ELF executable\n");
-	}
-	if (ehdr.e_ident[EI_VERSION] != EV_CURRENT) {
-		die("Unknown ELF version\n");
-	}
-	/* Convert the fields to native endian */
-	ehdr.e_type      = elf16_to_cpu(ehdr.e_type);
-	ehdr.e_machine   = elf16_to_cpu(ehdr.e_machine);
-	ehdr.e_version   = elf32_to_cpu(ehdr.e_version);
-	ehdr.e_entry     = elf32_to_cpu(ehdr.e_entry);
-	ehdr.e_phoff     = elf32_to_cpu(ehdr.e_phoff);
-	ehdr.e_shoff     = elf32_to_cpu(ehdr.e_shoff);
-	ehdr.e_flags     = elf32_to_cpu(ehdr.e_flags);
-	ehdr.e_ehsize    = elf16_to_cpu(ehdr.e_ehsize);
-	ehdr.e_phentsize = elf16_to_cpu(ehdr.e_phentsize);
-	ehdr.e_phnum     = elf16_to_cpu(ehdr.e_phnum);
-	ehdr.e_shentsize = elf16_to_cpu(ehdr.e_shentsize);
-	ehdr.e_shnum     = elf16_to_cpu(ehdr.e_shnum);
-	ehdr.e_shstrndx  = elf16_to_cpu(ehdr.e_shstrndx);
-
-	if ((ehdr.e_type != ET_EXEC) && (ehdr.e_type != ET_DYN)) {
-		die("Unsupported ELF header type\n");
-	}
-	if (ehdr.e_machine != EM_386) {
-		die("Not for x86\n");
-	}
-	if (ehdr.e_version != EV_CURRENT) {
-		die("Unknown ELF version\n");
-	}
-	if (ehdr.e_ehsize != sizeof(Elf32_Ehdr)) {
-		die("Bad Elf header size\n");
-	}
-	if (ehdr.e_phentsize != sizeof(Elf32_Phdr)) {
-		die("Bad program header entry\n");
-	}
-	if (ehdr.e_shentsize != sizeof(Elf32_Shdr)) {
-		die("Bad section header entry\n");
-	}
-	if (ehdr.e_shstrndx >= ehdr.e_shnum) {
-		die("String table index out of bounds\n");
-	}
-}
-
-static void read_shdrs(FILE *fp)
-{
-	int i;
-	Elf32_Shdr shdr;
-
-	secs = calloc(ehdr.e_shnum, sizeof(struct section));
-	if (!secs) {
-		die("Unable to allocate %d section headers\n",
-		    ehdr.e_shnum);
-	}
-	if (fseek(fp, ehdr.e_shoff, SEEK_SET) < 0) {
-		die("Seek to %d failed: %s\n",
-			ehdr.e_shoff, strerror(errno));
-	}
-	for (i = 0; i < ehdr.e_shnum; i++) {
-		struct section *sec = &secs[i];
-		if (fread(&shdr, sizeof shdr, 1, fp) != 1)
-			die("Cannot read ELF section headers %d/%d: %s\n",
-			    i, ehdr.e_shnum, strerror(errno));
-		sec->shdr.sh_name      = elf32_to_cpu(shdr.sh_name);
-		sec->shdr.sh_type      = elf32_to_cpu(shdr.sh_type);
-		sec->shdr.sh_flags     = elf32_to_cpu(shdr.sh_flags);
-		sec->shdr.sh_addr      = elf32_to_cpu(shdr.sh_addr);
-		sec->shdr.sh_offset    = elf32_to_cpu(shdr.sh_offset);
-		sec->shdr.sh_size      = elf32_to_cpu(shdr.sh_size);
-		sec->shdr.sh_link      = elf32_to_cpu(shdr.sh_link);
-		sec->shdr.sh_info      = elf32_to_cpu(shdr.sh_info);
-		sec->shdr.sh_addralign = elf32_to_cpu(shdr.sh_addralign);
-		sec->shdr.sh_entsize   = elf32_to_cpu(shdr.sh_entsize);
-		if (sec->shdr.sh_link < ehdr.e_shnum)
-			sec->link = &secs[sec->shdr.sh_link];
-	}
-
-}
-
-static void read_strtabs(FILE *fp)
-{
-	int i;
-	for (i = 0; i < ehdr.e_shnum; i++) {
-		struct section *sec = &secs[i];
-		if (sec->shdr.sh_type != SHT_STRTAB) {
-			continue;
-		}
-		sec->strtab = malloc(sec->shdr.sh_size);
-		if (!sec->strtab) {
-			die("malloc of %d bytes for strtab failed\n",
-				sec->shdr.sh_size);
-		}
-		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
-			die("Seek to %d failed: %s\n",
-				sec->shdr.sh_offset, strerror(errno));
-		}
-		if (fread(sec->strtab, 1, sec->shdr.sh_size, fp)
-		    != sec->shdr.sh_size) {
-			die("Cannot read symbol table: %s\n",
-				strerror(errno));
-		}
-	}
-}
-
-static void read_symtabs(FILE *fp)
-{
-	int i,j;
-	for (i = 0; i < ehdr.e_shnum; i++) {
-		struct section *sec = &secs[i];
-		if (sec->shdr.sh_type != SHT_SYMTAB) {
-			continue;
-		}
-		sec->symtab = malloc(sec->shdr.sh_size);
-		if (!sec->symtab) {
-			die("malloc of %d bytes for symtab failed\n",
-				sec->shdr.sh_size);
-		}
-		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
-			die("Seek to %d failed: %s\n",
-				sec->shdr.sh_offset, strerror(errno));
-		}
-		if (fread(sec->symtab, 1, sec->shdr.sh_size, fp)
-		    != sec->shdr.sh_size) {
-			die("Cannot read symbol table: %s\n",
-				strerror(errno));
-		}
-		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Sym); j++) {
-			Elf32_Sym *sym = &sec->symtab[j];
-			sym->st_name  = elf32_to_cpu(sym->st_name);
-			sym->st_value = elf32_to_cpu(sym->st_value);
-			sym->st_size  = elf32_to_cpu(sym->st_size);
-			sym->st_shndx = elf16_to_cpu(sym->st_shndx);
-		}
-	}
-}
-
-
-static void read_relocs(FILE *fp)
-{
-	int i,j;
-	for (i = 0; i < ehdr.e_shnum; i++) {
-		struct section *sec = &secs[i];
-		if (sec->shdr.sh_type != SHT_REL) {
-			continue;
-		}
-		sec->reltab = malloc(sec->shdr.sh_size);
-		if (!sec->reltab) {
-			die("malloc of %d bytes for relocs failed\n",
-				sec->shdr.sh_size);
-		}
-		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
-			die("Seek to %d failed: %s\n",
-				sec->shdr.sh_offset, strerror(errno));
-		}
-		if (fread(sec->reltab, 1, sec->shdr.sh_size, fp)
-		    != sec->shdr.sh_size) {
-			die("Cannot read symbol table: %s\n",
-				strerror(errno));
-		}
-		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
-			Elf32_Rel *rel = &sec->reltab[j];
-			rel->r_offset = elf32_to_cpu(rel->r_offset);
-			rel->r_info   = elf32_to_cpu(rel->r_info);
-		}
-	}
-}
-
-
-static void print_absolute_symbols(void)
-{
-	int i;
-	printf("Absolute symbols\n");
-	printf(" Num:    Value Size  Type       Bind        Visibility  Name\n");
-	for (i = 0; i < ehdr.e_shnum; i++) {
-		struct section *sec = &secs[i];
-		char *sym_strtab;
-		int j;
-
-		if (sec->shdr.sh_type != SHT_SYMTAB) {
-			continue;
-		}
-		sym_strtab = sec->link->strtab;
-		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Sym); j++) {
-			Elf32_Sym *sym;
-			const char *name;
-			sym = &sec->symtab[j];
-			name = sym_name(sym_strtab, sym);
-			if (sym->st_shndx != SHN_ABS) {
-				continue;
-			}
-			printf("%5d %08x %5d %10s %10s %12s %s\n",
-				j, sym->st_value, sym->st_size,
-				sym_type(ELF32_ST_TYPE(sym->st_info)),
-				sym_bind(ELF32_ST_BIND(sym->st_info)),
-				sym_visibility(ELF32_ST_VISIBILITY(sym->st_other)),
-				name);
-		}
-	}
-	printf("\n");
-}
-
-static void print_absolute_relocs(void)
-{
-	int i, printed = 0;
-
-	for (i = 0; i < ehdr.e_shnum; i++) {
-		struct section *sec = &secs[i];
-		struct section *sec_applies, *sec_symtab;
-		char *sym_strtab;
-		Elf32_Sym *sh_symtab;
-		int j;
-		if (sec->shdr.sh_type != SHT_REL) {
-			continue;
-		}
-		sec_symtab  = sec->link;
-		sec_applies = &secs[sec->shdr.sh_info];
-		if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) {
-			continue;
-		}
-		sh_symtab  = sec_symtab->symtab;
-		sym_strtab = sec_symtab->link->strtab;
-		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
-			Elf32_Rel *rel;
-			Elf32_Sym *sym;
-			const char *name;
-			rel = &sec->reltab[j];
-			sym = &sh_symtab[ELF32_R_SYM(rel->r_info)];
-			name = sym_name(sym_strtab, sym);
-			if (sym->st_shndx != SHN_ABS) {
-				continue;
-			}
-
-			/* Absolute symbols are not relocated if bzImage is
-			 * loaded at a non-compiled address. Display a warning
-			 * to user at compile time about the absolute
-			 * relocations present.
-			 *
-			 * User need to audit the code to make sure
-			 * some symbols which should have been section
-			 * relative have not become absolute because of some
-			 * linker optimization or wrong programming usage.
-			 *
-			 * Before warning check if this absolute symbol
-			 * relocation is harmless.
-			 */
-			if (is_abs_reloc(name) || is_rel_reloc(name))
-				continue;
-
-			if (!printed) {
-				printf("WARNING: Absolute relocations"
-					" present\n");
-				printf("Offset     Info     Type     Sym.Value "
-					"Sym.Name\n");
-				printed = 1;
-			}
-
-			printf("%08x %08x %10s %08x  %s\n",
-				rel->r_offset,
-				rel->r_info,
-				rel_type(ELF32_R_TYPE(rel->r_info)),
-				sym->st_value,
-				name);
-		}
-	}
-
-	if (printed)
-		printf("\n");
-}
-
-static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym))
-{
-	int i;
-	/* Walk through the relocations */
-	for (i = 0; i < ehdr.e_shnum; i++) {
-		char *sym_strtab;
-		Elf32_Sym *sh_symtab;
-		struct section *sec_applies, *sec_symtab;
-		int j;
-		struct section *sec = &secs[i];
-
-		if (sec->shdr.sh_type != SHT_REL) {
-			continue;
-		}
-		sec_symtab  = sec->link;
-		sec_applies = &secs[sec->shdr.sh_info];
-		if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) {
-			continue;
-		}
-		sh_symtab = sec_symtab->symtab;
-		sym_strtab = sec_symtab->link->strtab;
-		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
-			Elf32_Rel *rel;
-			Elf32_Sym *sym;
-			unsigned r_type;
-			rel = &sec->reltab[j];
-			sym = &sh_symtab[ELF32_R_SYM(rel->r_info)];
-			r_type = ELF32_R_TYPE(rel->r_info);
-			/* Don't visit relocations to absolute symbols */
-			if (sym->st_shndx == SHN_ABS &&
-			    !is_rel_reloc(sym_name(sym_strtab, sym))) {
-				continue;
-			}
-			switch (r_type) {
-			case R_386_NONE:
-			case R_386_PC32:
-				/*
-				 * NONE can be ignored and and PC relative
-				 * relocations don't need to be adjusted.
-				 */
-				break;
-			case R_386_32:
-				/* Visit relocations that need to be adjusted */
-				visit(rel, sym);
-				break;
-			default:
-				die("Unsupported relocation type: %s (%d)\n",
-				    rel_type(r_type), r_type);
-				break;
-			}
-		}
-	}
-}
-
-static void count_reloc(Elf32_Rel *rel, Elf32_Sym *sym)
-{
-	reloc_count += 1;
-}
-
-static void collect_reloc(Elf32_Rel *rel, Elf32_Sym *sym)
-{
-	/* Remember the address that needs to be adjusted. */
-	relocs[reloc_idx++] = rel->r_offset;
-}
-
-static int cmp_relocs(const void *va, const void *vb)
-{
-	const unsigned long *a, *b;
-	a = va; b = vb;
-	return (*a == *b)? 0 : (*a > *b)? 1 : -1;
-}
-
-static void emit_relocs(int as_text)
-{
-	int i;
-	/* Count how many relocations I have and allocate space for them. */
-	reloc_count = 0;
-	walk_relocs(count_reloc);
-	relocs = malloc(reloc_count * sizeof(relocs[0]));
-	if (!relocs) {
-		die("malloc of %d entries for relocs failed\n",
-			reloc_count);
-	}
-	/* Collect up the relocations */
-	reloc_idx = 0;
-	walk_relocs(collect_reloc);
-
-	/* Order the relocations for more efficient processing */
-	qsort(relocs, reloc_count, sizeof(relocs[0]), cmp_relocs);
-
-	/* Print the relocations */
-	if (as_text) {
-		/* Print the relocations in a form suitable that
-		 * gas will like.
-		 */
-		printf(".section \".data.reloc\",\"a\"\n");
-		printf(".balign 4\n");
-		for (i = 0; i < reloc_count; i++) {
-			printf("\t .long 0x%08lx\n", relocs[i]);
-		}
-		printf("\n");
-	}
-	else {
-		unsigned char buf[4];
-		/* Print a stop */
-		fwrite("\0\0\0\0", 4, 1, stdout);
-		/* Now print each relocation */
-		for (i = 0; i < reloc_count; i++) {
-			buf[0] = (relocs[i] >>  0) & 0xff;
-			buf[1] = (relocs[i] >>  8) & 0xff;
-			buf[2] = (relocs[i] >> 16) & 0xff;
-			buf[3] = (relocs[i] >> 24) & 0xff;
-			fwrite(buf, 4, 1, stdout);
-		}
-	}
-}
-
-static void usage(void)
-{
-	die("relocs [--abs-syms |--abs-relocs | --text] vmlinux\n");
-}
-
-int main(int argc, char **argv)
-{
-	int show_absolute_syms, show_absolute_relocs;
-	int as_text;
-	const char *fname;
-	FILE *fp;
-	int i;
-
-	regex_init();
-
-	show_absolute_syms = 0;
-	show_absolute_relocs = 0;
-	as_text = 0;
-	fname = NULL;
-	for (i = 1; i < argc; i++) {
-		char *arg = argv[i];
-		if (*arg == '-') {
-			if (strcmp(argv[1], "--abs-syms") == 0) {
-				show_absolute_syms = 1;
-				continue;
-			}
-
-			if (strcmp(argv[1], "--abs-relocs") == 0) {
-				show_absolute_relocs = 1;
-				continue;
-			}
-			else if (strcmp(argv[1], "--text") == 0) {
-				as_text = 1;
-				continue;
-			}
-		}
-		else if (!fname) {
-			fname = arg;
-			continue;
-		}
-		usage();
-	}
-	if (!fname) {
-		usage();
-	}
-	fp = fopen(fname, "r");
-	if (!fp) {
-		die("Cannot open %s: %s\n",
-			fname, strerror(errno));
-	}
-	read_ehdr(fp);
-	read_shdrs(fp);
-	read_strtabs(fp);
-	read_symtabs(fp);
-	read_relocs(fp);
-	if (show_absolute_syms) {
-		print_absolute_symbols();
-		return 0;
-	}
-	if (show_absolute_relocs) {
-		print_absolute_relocs();
-		return 0;
-	}
-	emit_relocs(as_text);
-	return 0;
-}
--- /dev/null
+++ b/arch/x86/tools/.gitignore
@@ -0,0 +1 @@
+relocs
--- a/arch/x86/tools/Makefile
+++ b/arch/x86/tools/Makefile
@@ -36,3 +36,7 @@ HOSTCFLAGS_insn_sanity.o := -Wall -I$(ob
 $(obj)/test_get_len.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c
 
 $(obj)/insn_sanity.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c
+
+HOST_EXTRACFLAGS += -I$(srctree)/tools/include
+hostprogs-y	+= relocs
+relocs: $(obj)/relocs
--- /dev/null
+++ b/arch/x86/tools/relocs.c
@@ -0,0 +1,797 @@
+#include <stdio.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include <elf.h>
+#include <byteswap.h>
+#define USE_BSD
+#include <endian.h>
+#include <regex.h>
+#include <tools/le_byteshift.h>
+
+static void die(char *fmt, ...);
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+static Elf32_Ehdr ehdr;
+static unsigned long reloc_count, reloc_idx;
+static unsigned long *relocs;
+static unsigned long reloc16_count, reloc16_idx;
+static unsigned long *relocs16;
+
+struct section {
+	Elf32_Shdr     shdr;
+	struct section *link;
+	Elf32_Sym      *symtab;
+	Elf32_Rel      *reltab;
+	char           *strtab;
+};
+static struct section *secs;
+
+enum symtype {
+	S_ABS,
+	S_REL,
+	S_SEG,
+	S_LIN,
+	S_NSYMTYPES
+};
+
+static const char * const sym_regex_kernel[S_NSYMTYPES] = {
+/*
+ * Following symbols have been audited. There values are constant and do
+ * not change if bzImage is loaded at a different physical address than
+ * the address for which it has been compiled. Don't warn user about
+ * absolute relocations present w.r.t these symbols.
+ */
+	[S_ABS] =
+	"^(xen_irq_disable_direct_reloc$|"
+	"xen_save_fl_direct_reloc$|"
+	"VDSO|"
+	"__crc_)",
+
+/*
+ * These symbols are known to be relative, even if the linker marks them
+ * as absolute (typically defined outside any section in the linker script.)
+ */
+	[S_REL] =
+	"^_end$",
+};
+
+
+static const char * const sym_regex_realmode[S_NSYMTYPES] = {
+/*
+ * These are 16-bit segment symbols when compiling 16-bit code.
+ */
+	[S_SEG] =
+	"^real_mode_seg$",
+
+/*
+ * These are offsets belonging to segments, as opposed to linear addresses,
+ * when compiling 16-bit code.
+ */
+	[S_LIN] =
+	"^pa_",
+};
+
+static const char * const *sym_regex;
+
+static regex_t sym_regex_c[S_NSYMTYPES];
+static int is_reloc(enum symtype type, const char *sym_name)
+{
+	return sym_regex[type] &&
+		!regexec(&sym_regex_c[type], sym_name, 0, NULL, 0);
+}
+
+static void regex_init(int use_real_mode)
+{
+        char errbuf[128];
+        int err;
+	int i;
+
+	if (use_real_mode)
+		sym_regex = sym_regex_realmode;
+	else
+		sym_regex = sym_regex_kernel;
+
+	for (i = 0; i < S_NSYMTYPES; i++) {
+		if (!sym_regex[i])
+			continue;
+
+		err = regcomp(&sym_regex_c[i], sym_regex[i],
+			      REG_EXTENDED|REG_NOSUB);
+
+		if (err) {
+			regerror(err, &sym_regex_c[i], errbuf, sizeof errbuf);
+			die("%s", errbuf);
+		}
+        }
+}
+
+static void die(char *fmt, ...)
+{
+	va_list ap;
+	va_start(ap, fmt);
+	vfprintf(stderr, fmt, ap);
+	va_end(ap);
+	exit(1);
+}
+
+static const char *sym_type(unsigned type)
+{
+	static const char *type_name[] = {
+#define SYM_TYPE(X) [X] = #X
+		SYM_TYPE(STT_NOTYPE),
+		SYM_TYPE(STT_OBJECT),
+		SYM_TYPE(STT_FUNC),
+		SYM_TYPE(STT_SECTION),
+		SYM_TYPE(STT_FILE),
+		SYM_TYPE(STT_COMMON),
+		SYM_TYPE(STT_TLS),
+#undef SYM_TYPE
+	};
+	const char *name = "unknown sym type name";
+	if (type < ARRAY_SIZE(type_name)) {
+		name = type_name[type];
+	}
+	return name;
+}
+
+static const char *sym_bind(unsigned bind)
+{
+	static const char *bind_name[] = {
+#define SYM_BIND(X) [X] = #X
+		SYM_BIND(STB_LOCAL),
+		SYM_BIND(STB_GLOBAL),
+		SYM_BIND(STB_WEAK),
+#undef SYM_BIND
+	};
+	const char *name = "unknown sym bind name";
+	if (bind < ARRAY_SIZE(bind_name)) {
+		name = bind_name[bind];
+	}
+	return name;
+}
+
+static const char *sym_visibility(unsigned visibility)
+{
+	static const char *visibility_name[] = {
+#define SYM_VISIBILITY(X) [X] = #X
+		SYM_VISIBILITY(STV_DEFAULT),
+		SYM_VISIBILITY(STV_INTERNAL),
+		SYM_VISIBILITY(STV_HIDDEN),
+		SYM_VISIBILITY(STV_PROTECTED),
+#undef SYM_VISIBILITY
+	};
+	const char *name = "unknown sym visibility name";
+	if (visibility < ARRAY_SIZE(visibility_name)) {
+		name = visibility_name[visibility];
+	}
+	return name;
+}
+
+static const char *rel_type(unsigned type)
+{
+	static const char *type_name[] = {
+#define REL_TYPE(X) [X] = #X
+		REL_TYPE(R_386_NONE),
+		REL_TYPE(R_386_32),
+		REL_TYPE(R_386_PC32),
+		REL_TYPE(R_386_GOT32),
+		REL_TYPE(R_386_PLT32),
+		REL_TYPE(R_386_COPY),
+		REL_TYPE(R_386_GLOB_DAT),
+		REL_TYPE(R_386_JMP_SLOT),
+		REL_TYPE(R_386_RELATIVE),
+		REL_TYPE(R_386_GOTOFF),
+		REL_TYPE(R_386_GOTPC),
+		REL_TYPE(R_386_8),
+		REL_TYPE(R_386_PC8),
+		REL_TYPE(R_386_16),
+		REL_TYPE(R_386_PC16),
+#undef REL_TYPE
+	};
+	const char *name = "unknown type rel type name";
+	if (type < ARRAY_SIZE(type_name) && type_name[type]) {
+		name = type_name[type];
+	}
+	return name;
+}
+
+static const char *sec_name(unsigned shndx)
+{
+	const char *sec_strtab;
+	const char *name;
+	sec_strtab = secs[ehdr.e_shstrndx].strtab;
+	name = "<noname>";
+	if (shndx < ehdr.e_shnum) {
+		name = sec_strtab + secs[shndx].shdr.sh_name;
+	}
+	else if (shndx == SHN_ABS) {
+		name = "ABSOLUTE";
+	}
+	else if (shndx == SHN_COMMON) {
+		name = "COMMON";
+	}
+	return name;
+}
+
+static const char *sym_name(const char *sym_strtab, Elf32_Sym *sym)
+{
+	const char *name;
+	name = "<noname>";
+	if (sym->st_name) {
+		name = sym_strtab + sym->st_name;
+	}
+	else {
+		name = sec_name(sym->st_shndx);
+	}
+	return name;
+}
+
+
+
+#if BYTE_ORDER == LITTLE_ENDIAN
+#define le16_to_cpu(val) (val)
+#define le32_to_cpu(val) (val)
+#endif
+#if BYTE_ORDER == BIG_ENDIAN
+#define le16_to_cpu(val) bswap_16(val)
+#define le32_to_cpu(val) bswap_32(val)
+#endif
+
+static uint16_t elf16_to_cpu(uint16_t val)
+{
+	return le16_to_cpu(val);
+}
+
+static uint32_t elf32_to_cpu(uint32_t val)
+{
+	return le32_to_cpu(val);
+}
+
+static void read_ehdr(FILE *fp)
+{
+	if (fread(&ehdr, sizeof(ehdr), 1, fp) != 1) {
+		die("Cannot read ELF header: %s\n",
+			strerror(errno));
+	}
+	if (memcmp(ehdr.e_ident, ELFMAG, SELFMAG) != 0) {
+		die("No ELF magic\n");
+	}
+	if (ehdr.e_ident[EI_CLASS] != ELFCLASS32) {
+		die("Not a 32 bit executable\n");
+	}
+	if (ehdr.e_ident[EI_DATA] != ELFDATA2LSB) {
+		die("Not a LSB ELF executable\n");
+	}
+	if (ehdr.e_ident[EI_VERSION] != EV_CURRENT) {
+		die("Unknown ELF version\n");
+	}
+	/* Convert the fields to native endian */
+	ehdr.e_type      = elf16_to_cpu(ehdr.e_type);
+	ehdr.e_machine   = elf16_to_cpu(ehdr.e_machine);
+	ehdr.e_version   = elf32_to_cpu(ehdr.e_version);
+	ehdr.e_entry     = elf32_to_cpu(ehdr.e_entry);
+	ehdr.e_phoff     = elf32_to_cpu(ehdr.e_phoff);
+	ehdr.e_shoff     = elf32_to_cpu(ehdr.e_shoff);
+	ehdr.e_flags     = elf32_to_cpu(ehdr.e_flags);
+	ehdr.e_ehsize    = elf16_to_cpu(ehdr.e_ehsize);
+	ehdr.e_phentsize = elf16_to_cpu(ehdr.e_phentsize);
+	ehdr.e_phnum     = elf16_to_cpu(ehdr.e_phnum);
+	ehdr.e_shentsize = elf16_to_cpu(ehdr.e_shentsize);
+	ehdr.e_shnum     = elf16_to_cpu(ehdr.e_shnum);
+	ehdr.e_shstrndx  = elf16_to_cpu(ehdr.e_shstrndx);
+
+	if ((ehdr.e_type != ET_EXEC) && (ehdr.e_type != ET_DYN)) {
+		die("Unsupported ELF header type\n");
+	}
+	if (ehdr.e_machine != EM_386) {
+		die("Not for x86\n");
+	}
+	if (ehdr.e_version != EV_CURRENT) {
+		die("Unknown ELF version\n");
+	}
+	if (ehdr.e_ehsize != sizeof(Elf32_Ehdr)) {
+		die("Bad Elf header size\n");
+	}
+	if (ehdr.e_phentsize != sizeof(Elf32_Phdr)) {
+		die("Bad program header entry\n");
+	}
+	if (ehdr.e_shentsize != sizeof(Elf32_Shdr)) {
+		die("Bad section header entry\n");
+	}
+	if (ehdr.e_shstrndx >= ehdr.e_shnum) {
+		die("String table index out of bounds\n");
+	}
+}
+
+static void read_shdrs(FILE *fp)
+{
+	int i;
+	Elf32_Shdr shdr;
+
+	secs = calloc(ehdr.e_shnum, sizeof(struct section));
+	if (!secs) {
+		die("Unable to allocate %d section headers\n",
+		    ehdr.e_shnum);
+	}
+	if (fseek(fp, ehdr.e_shoff, SEEK_SET) < 0) {
+		die("Seek to %d failed: %s\n",
+			ehdr.e_shoff, strerror(errno));
+	}
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		if (fread(&shdr, sizeof shdr, 1, fp) != 1)
+			die("Cannot read ELF section headers %d/%d: %s\n",
+			    i, ehdr.e_shnum, strerror(errno));
+		sec->shdr.sh_name      = elf32_to_cpu(shdr.sh_name);
+		sec->shdr.sh_type      = elf32_to_cpu(shdr.sh_type);
+		sec->shdr.sh_flags     = elf32_to_cpu(shdr.sh_flags);
+		sec->shdr.sh_addr      = elf32_to_cpu(shdr.sh_addr);
+		sec->shdr.sh_offset    = elf32_to_cpu(shdr.sh_offset);
+		sec->shdr.sh_size      = elf32_to_cpu(shdr.sh_size);
+		sec->shdr.sh_link      = elf32_to_cpu(shdr.sh_link);
+		sec->shdr.sh_info      = elf32_to_cpu(shdr.sh_info);
+		sec->shdr.sh_addralign = elf32_to_cpu(shdr.sh_addralign);
+		sec->shdr.sh_entsize   = elf32_to_cpu(shdr.sh_entsize);
+		if (sec->shdr.sh_link < ehdr.e_shnum)
+			sec->link = &secs[sec->shdr.sh_link];
+	}
+
+}
+
+static void read_strtabs(FILE *fp)
+{
+	int i;
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		if (sec->shdr.sh_type != SHT_STRTAB) {
+			continue;
+		}
+		sec->strtab = malloc(sec->shdr.sh_size);
+		if (!sec->strtab) {
+			die("malloc of %d bytes for strtab failed\n",
+				sec->shdr.sh_size);
+		}
+		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
+			die("Seek to %d failed: %s\n",
+				sec->shdr.sh_offset, strerror(errno));
+		}
+		if (fread(sec->strtab, 1, sec->shdr.sh_size, fp)
+		    != sec->shdr.sh_size) {
+			die("Cannot read symbol table: %s\n",
+				strerror(errno));
+		}
+	}
+}
+
+static void read_symtabs(FILE *fp)
+{
+	int i,j;
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		if (sec->shdr.sh_type != SHT_SYMTAB) {
+			continue;
+		}
+		sec->symtab = malloc(sec->shdr.sh_size);
+		if (!sec->symtab) {
+			die("malloc of %d bytes for symtab failed\n",
+				sec->shdr.sh_size);
+		}
+		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
+			die("Seek to %d failed: %s\n",
+				sec->shdr.sh_offset, strerror(errno));
+		}
+		if (fread(sec->symtab, 1, sec->shdr.sh_size, fp)
+		    != sec->shdr.sh_size) {
+			die("Cannot read symbol table: %s\n",
+				strerror(errno));
+		}
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Sym); j++) {
+			Elf32_Sym *sym = &sec->symtab[j];
+			sym->st_name  = elf32_to_cpu(sym->st_name);
+			sym->st_value = elf32_to_cpu(sym->st_value);
+			sym->st_size  = elf32_to_cpu(sym->st_size);
+			sym->st_shndx = elf16_to_cpu(sym->st_shndx);
+		}
+	}
+}
+
+
+static void read_relocs(FILE *fp)
+{
+	int i,j;
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		if (sec->shdr.sh_type != SHT_REL) {
+			continue;
+		}
+		sec->reltab = malloc(sec->shdr.sh_size);
+		if (!sec->reltab) {
+			die("malloc of %d bytes for relocs failed\n",
+				sec->shdr.sh_size);
+		}
+		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
+			die("Seek to %d failed: %s\n",
+				sec->shdr.sh_offset, strerror(errno));
+		}
+		if (fread(sec->reltab, 1, sec->shdr.sh_size, fp)
+		    != sec->shdr.sh_size) {
+			die("Cannot read symbol table: %s\n",
+				strerror(errno));
+		}
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
+			Elf32_Rel *rel = &sec->reltab[j];
+			rel->r_offset = elf32_to_cpu(rel->r_offset);
+			rel->r_info   = elf32_to_cpu(rel->r_info);
+		}
+	}
+}
+
+
+static void print_absolute_symbols(void)
+{
+	int i;
+	printf("Absolute symbols\n");
+	printf(" Num:    Value Size  Type       Bind        Visibility  Name\n");
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		char *sym_strtab;
+		int j;
+
+		if (sec->shdr.sh_type != SHT_SYMTAB) {
+			continue;
+		}
+		sym_strtab = sec->link->strtab;
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Sym); j++) {
+			Elf32_Sym *sym;
+			const char *name;
+			sym = &sec->symtab[j];
+			name = sym_name(sym_strtab, sym);
+			if (sym->st_shndx != SHN_ABS) {
+				continue;
+			}
+			printf("%5d %08x %5d %10s %10s %12s %s\n",
+				j, sym->st_value, sym->st_size,
+				sym_type(ELF32_ST_TYPE(sym->st_info)),
+				sym_bind(ELF32_ST_BIND(sym->st_info)),
+				sym_visibility(ELF32_ST_VISIBILITY(sym->st_other)),
+				name);
+		}
+	}
+	printf("\n");
+}
+
+static void print_absolute_relocs(void)
+{
+	int i, printed = 0;
+
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		struct section *sec_applies, *sec_symtab;
+		char *sym_strtab;
+		Elf32_Sym *sh_symtab;
+		int j;
+		if (sec->shdr.sh_type != SHT_REL) {
+			continue;
+		}
+		sec_symtab  = sec->link;
+		sec_applies = &secs[sec->shdr.sh_info];
+		if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) {
+			continue;
+		}
+		sh_symtab  = sec_symtab->symtab;
+		sym_strtab = sec_symtab->link->strtab;
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
+			Elf32_Rel *rel;
+			Elf32_Sym *sym;
+			const char *name;
+			rel = &sec->reltab[j];
+			sym = &sh_symtab[ELF32_R_SYM(rel->r_info)];
+			name = sym_name(sym_strtab, sym);
+			if (sym->st_shndx != SHN_ABS) {
+				continue;
+			}
+
+			/* Absolute symbols are not relocated if bzImage is
+			 * loaded at a non-compiled address. Display a warning
+			 * to user at compile time about the absolute
+			 * relocations present.
+			 *
+			 * User need to audit the code to make sure
+			 * some symbols which should have been section
+			 * relative have not become absolute because of some
+			 * linker optimization or wrong programming usage.
+			 *
+			 * Before warning check if this absolute symbol
+			 * relocation is harmless.
+			 */
+			if (is_reloc(S_ABS, name) || is_reloc(S_REL, name))
+				continue;
+
+			if (!printed) {
+				printf("WARNING: Absolute relocations"
+					" present\n");
+				printf("Offset     Info     Type     Sym.Value "
+					"Sym.Name\n");
+				printed = 1;
+			}
+
+			printf("%08x %08x %10s %08x  %s\n",
+				rel->r_offset,
+				rel->r_info,
+				rel_type(ELF32_R_TYPE(rel->r_info)),
+				sym->st_value,
+				name);
+		}
+	}
+
+	if (printed)
+		printf("\n");
+}
+
+static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym),
+			int use_real_mode)
+{
+	int i;
+	/* Walk through the relocations */
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		char *sym_strtab;
+		Elf32_Sym *sh_symtab;
+		struct section *sec_applies, *sec_symtab;
+		int j;
+		struct section *sec = &secs[i];
+
+		if (sec->shdr.sh_type != SHT_REL) {
+			continue;
+		}
+		sec_symtab  = sec->link;
+		sec_applies = &secs[sec->shdr.sh_info];
+		if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) {
+			continue;
+		}
+		sh_symtab = sec_symtab->symtab;
+		sym_strtab = sec_symtab->link->strtab;
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
+			Elf32_Rel *rel;
+			Elf32_Sym *sym;
+			unsigned r_type;
+			const char *symname;
+			rel = &sec->reltab[j];
+			sym = &sh_symtab[ELF32_R_SYM(rel->r_info)];
+			r_type = ELF32_R_TYPE(rel->r_info);
+
+			switch (r_type) {
+			case R_386_NONE:
+			case R_386_PC32:
+			case R_386_PC16:
+			case R_386_PC8:
+				/*
+				 * NONE can be ignored and and PC relative
+				 * relocations don't need to be adjusted.
+				 */
+				break;
+
+			case R_386_16:
+				symname = sym_name(sym_strtab, sym);
+				if (!use_real_mode)
+					goto bad;
+				if (sym->st_shndx == SHN_ABS) {
+					if (is_reloc(S_ABS, symname))
+						break;
+					else if (!is_reloc(S_SEG, symname))
+						goto bad;
+				} else {
+					if (is_reloc(S_LIN, symname))
+						goto bad;
+					else
+						break;
+				}
+				visit(rel, sym);
+				break;
+
+			case R_386_32:
+				symname = sym_name(sym_strtab, sym);
+				if (sym->st_shndx == SHN_ABS) {
+					if (is_reloc(S_ABS, symname))
+						break;
+					else if (!is_reloc(S_REL, symname))
+						goto bad;
+				} else {
+					if (use_real_mode &&
+					    !is_reloc(S_LIN, symname))
+						break;
+				}
+				visit(rel, sym);
+				break;
+			default:
+				die("Unsupported relocation type: %s (%d)\n",
+				    rel_type(r_type), r_type);
+				break;
+			bad:
+				symname = sym_name(sym_strtab, sym);
+				die("Invalid %s relocation: %s\n",
+				    rel_type(r_type), symname);
+			}
+		}
+	}
+}
+
+static void count_reloc(Elf32_Rel *rel, Elf32_Sym *sym)
+{
+	if (ELF32_R_TYPE(rel->r_info) == R_386_16)
+		reloc16_count++;
+	else
+		reloc_count++;
+}
+
+static void collect_reloc(Elf32_Rel *rel, Elf32_Sym *sym)
+{
+	/* Remember the address that needs to be adjusted. */
+	if (ELF32_R_TYPE(rel->r_info) == R_386_16)
+		relocs16[reloc16_idx++] = rel->r_offset;
+	else
+		relocs[reloc_idx++] = rel->r_offset;
+}
+
+static int cmp_relocs(const void *va, const void *vb)
+{
+	const unsigned long *a, *b;
+	a = va; b = vb;
+	return (*a == *b)? 0 : (*a > *b)? 1 : -1;
+}
+
+static int write32(unsigned int v, FILE *f)
+{
+	unsigned char buf[4];
+
+	put_unaligned_le32(v, buf);
+	return fwrite(buf, 1, 4, f) == 4 ? 0 : -1;
+}
+
+static void emit_relocs(int as_text, int use_real_mode)
+{
+	int i;
+	/* Count how many relocations I have and allocate space for them. */
+	reloc_count = 0;
+	walk_relocs(count_reloc, use_real_mode);
+	relocs = malloc(reloc_count * sizeof(relocs[0]));
+	if (!relocs) {
+		die("malloc of %d entries for relocs failed\n",
+			reloc_count);
+	}
+
+	relocs16 = malloc(reloc16_count * sizeof(relocs[0]));
+	if (!relocs16) {
+		die("malloc of %d entries for relocs16 failed\n",
+			reloc16_count);
+	}
+	/* Collect up the relocations */
+	reloc_idx = 0;
+	walk_relocs(collect_reloc, use_real_mode);
+
+	if (reloc16_count && !use_real_mode)
+		die("Segment relocations found but --realmode not specified\n");
+
+	/* Order the relocations for more efficient processing */
+	qsort(relocs, reloc_count, sizeof(relocs[0]), cmp_relocs);
+	qsort(relocs16, reloc16_count, sizeof(relocs16[0]), cmp_relocs);
+
+	/* Print the relocations */
+	if (as_text) {
+		/* Print the relocations in a form suitable that
+		 * gas will like.
+		 */
+		printf(".section \".data.reloc\",\"a\"\n");
+		printf(".balign 4\n");
+		if (use_real_mode) {
+			printf("\t.long %lu\n", reloc16_count);
+			for (i = 0; i < reloc16_count; i++)
+				printf("\t.long 0x%08lx\n", relocs16[i]);
+			printf("\t.long %lu\n", reloc_count);
+			for (i = 0; i < reloc_count; i++) {
+				printf("\t.long 0x%08lx\n", relocs[i]);
+			}
+		} else {
+			/* Print a stop */
+			printf("\t.long 0x%08lx\n", (unsigned long)0);
+			for (i = 0; i < reloc_count; i++) {
+				printf("\t.long 0x%08lx\n", relocs[i]);
+			}
+		}
+
+		printf("\n");
+	}
+	else {
+		if (use_real_mode) {
+			write32(reloc16_count, stdout);
+			for (i = 0; i < reloc16_count; i++)
+				write32(relocs16[i], stdout);
+			write32(reloc_count, stdout);
+
+			/* Now print each relocation */
+			for (i = 0; i < reloc_count; i++)
+				write32(relocs[i], stdout);
+		} else {
+			/* Print a stop */
+			write32(0, stdout);
+
+			/* Now print each relocation */
+			for (i = 0; i < reloc_count; i++) {
+				write32(relocs[i], stdout);
+			}
+		}
+	}
+}
+
+static void usage(void)
+{
+	die("relocs [--abs-syms|--abs-relocs|--text|--realmode] vmlinux\n");
+}
+
+int main(int argc, char **argv)
+{
+	int show_absolute_syms, show_absolute_relocs;
+	int as_text, use_real_mode;
+	const char *fname;
+	FILE *fp;
+	int i;
+
+	show_absolute_syms = 0;
+	show_absolute_relocs = 0;
+	as_text = 0;
+	use_real_mode = 0;
+	fname = NULL;
+	for (i = 1; i < argc; i++) {
+		char *arg = argv[i];
+		if (*arg == '-') {
+			if (strcmp(arg, "--abs-syms") == 0) {
+				show_absolute_syms = 1;
+				continue;
+			}
+			if (strcmp(arg, "--abs-relocs") == 0) {
+				show_absolute_relocs = 1;
+				continue;
+			}
+			if (strcmp(arg, "--text") == 0) {
+				as_text = 1;
+				continue;
+			}
+			if (strcmp(arg, "--realmode") == 0) {
+				use_real_mode = 1;
+				continue;
+			}
+		}
+		else if (!fname) {
+			fname = arg;
+			continue;
+		}
+		usage();
+	}
+	if (!fname) {
+		usage();
+	}
+	regex_init(use_real_mode);
+	fp = fopen(fname, "r");
+	if (!fp) {
+		die("Cannot open %s: %s\n",
+			fname, strerror(errno));
+	}
+	read_ehdr(fp);
+	read_shdrs(fp);
+	read_strtabs(fp);
+	read_symtabs(fp);
+	read_relocs(fp);
+	if (show_absolute_syms) {
+		print_absolute_symbols();
+		return 0;
+	}
+	if (show_absolute_relocs) {
+		print_absolute_relocs();
+		return 0;
+	}
+	emit_relocs(as_text, use_real_mode);
+	return 0;
+}
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -8,6 +8,8 @@
 # conmakehash:	 Create arrays for initializing the kernel console tables
 # docproc:       Used in Documentation/DocBook
 
+HOST_EXTRACFLAGS += -I$(srctree)/tools/include
+
 hostprogs-$(CONFIG_KALLSYMS)     += kallsyms
 hostprogs-$(CONFIG_LOGO)         += pnmtologo
 hostprogs-$(CONFIG_VT)           += conmakehash

[ 77/94] x86, relocs: Workaround for binutils 2.22.52.0.1 section bug

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "H. Peter Anvin" <hpa@linux.intel.com>

commit a3e854d95a76862cd37937e0b0438f540536771a upstream.

GNU ld 2.22.52.0.1 has a bug that it blindly changes symbols from
section-relative to absolute if they are in a section of zero length.
This turns the symbols __init_begin and __init_end into absolute
symbols.  Let the relocs program know that those should be treated as
relative symbols.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/tools/relocs.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -56,7 +56,11 @@ static const char * const sym_regex_kern
  * as absolute (typically defined outside any section in the linker script.)
  */
 	[S_REL] =
-	"^_end$",
+	"^(__init_(begin|end)|"
+	"__x86_cpu_dev_(start|end)|"
+	"(__parainstructions|__alt_instructions)(|_end)|"
+	"(__iommu_table|__apicdrivers|__smp_locks)(|_end)|"
+	"_end)$"
 };
 
 

[ 78/94] x86, relocs: When printing an error, say relative or absolute

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "H. Peter Anvin" <hpa@linux.intel.com>

commit 24ab82bd9bf18f3efc69a131d73577940941e1b7 upstream.

When the relocs tool throws an error, let the error message say if it
is an absolute or relative symbol.  This should make it a lot more
clear what action the programmer needs to take and should help us find
the reason if additional symbol bugs show up.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/tools/relocs.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -563,10 +563,14 @@ static void walk_relocs(void (*visit)(El
 			Elf32_Sym *sym;
 			unsigned r_type;
 			const char *symname;
+			int shn_abs;
+
 			rel = &sec->reltab[j];
 			sym = &sh_symtab[ELF32_R_SYM(rel->r_info)];
 			r_type = ELF32_R_TYPE(rel->r_info);
 
+			shn_abs = sym->st_shndx == SHN_ABS;
+
 			switch (r_type) {
 			case R_386_NONE:
 			case R_386_PC32:
@@ -582,7 +586,7 @@ static void walk_relocs(void (*visit)(El
 				symname = sym_name(sym_strtab, sym);
 				if (!use_real_mode)
 					goto bad;
-				if (sym->st_shndx == SHN_ABS) {
+				if (shn_abs) {
 					if (is_reloc(S_ABS, symname))
 						break;
 					else if (!is_reloc(S_SEG, symname))
@@ -598,7 +602,7 @@ static void walk_relocs(void (*visit)(El
 
 			case R_386_32:
 				symname = sym_name(sym_strtab, sym);
-				if (sym->st_shndx == SHN_ABS) {
+				if (shn_abs) {
 					if (is_reloc(S_ABS, symname))
 						break;
 					else if (!is_reloc(S_REL, symname))
@@ -616,7 +620,8 @@ static void walk_relocs(void (*visit)(El
 				break;
 			bad:
 				symname = sym_name(sym_strtab, sym);
-				die("Invalid %s relocation: %s\n",
+				die("Invalid %s %s relocation: %s\n",
+				    shn_abs ? "absolute" : "relative",
 				    rel_type(r_type), symname);
 			}
 		}

[ 79/94] x86, relocs: Build clean fix

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jarkko Sakkinen <jarkko.sakkinen@intel.com>

commit b2d668da9307c4c163dd603d2bb3cadb10f9fd37 upstream.

relocs was not cleaned up when "make clean" is issued. This
patch fixes the issue.

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Link: http://lkml.kernel.org/r/1337622684-6834-1-git-send-email-jarkko.sakkinen@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/Makefile |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -189,6 +189,7 @@ archclean:
 	$(Q)rm -rf $(objtree)/arch/i386
 	$(Q)rm -rf $(objtree)/arch/x86_64
 	$(Q)$(MAKE) $(clean)=$(boot)
+	$(Q)$(MAKE) $(clean)=arch/x86/tools
 
 define archhelp
   echo  '* bzImage      - Compressed kernel image (arch/x86/boot/bzImage)'

[ 80/94] x86-32, relocs: Whitelist more symbols for ld bug workaround

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "H. Peter Anvin" <hpa@zytor.com>

commit fd952815307f0f272bf49fd364a7fd2f9992bc42 upstream.

As noted in checkin:

a3e854d95 x86, relocs: Workaround for binutils 2.22.52.0.1 section bug

ld version 2.22.52.0.[12] can incorrectly promote relative symbols to
absolute, if the output section they appear in is otherwise empty.

Since checkin:

6520fe55 x86, realmode: 16-bit real-mode code support for relocs tool

we actually check for this and error out rather than silently creating
a kernel which will malfunction if relocated.

Ingo found a configuration in which __start_builtin_fw triggered the
warning.

Go through the linker script sources and look for more symbols that
could plausibly get bogusly promoted to absolute, and add them to the
whitelist.

In general, if the following error triggers:

	Invalid absolute R_386_32 relocation: <symbol>

... then we should verify that <symbol> is really meant to be
relocated, and add it and any related symbols manually to the S_REL
regexp.

Please note that 6520fe55 does not introduce the error, only the check
for the error -- without 6520fe55 this version of ld will simply
produce a corrupt kernel if CONFIG_RELOCATABLE is set on x86-32.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/tools/relocs.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -60,6 +60,17 @@ static const char * const sym_regex_kern
 	"__x86_cpu_dev_(start|end)|"
 	"(__parainstructions|__alt_instructions)(|_end)|"
 	"(__iommu_table|__apicdrivers|__smp_locks)(|_end)|"
+	"__(start|end)_pci_.*|"
+	"__(start|end)_builtin_fw|"
+	"__(start|stop)___ksymtab(|_gpl|_unused|_unused_gpl|_gpl_future)|"
+	"__(start|stop)___kcrctab(|_gpl|_unused|_unused_gpl|_gpl_future)|"
+	"__(start|stop)___param|"
+	"__(start|stop)___modver|"
+	"__(start|stop)___bug_table|"
+	"__tracedata_(start|end)|"
+	"__(start|stop)_notes|"
+	"__end_rodata|"
+	"__initramfs_start|"
 	"_end)$"
 };
 

[ 81/94] x86, relocs: Add jiffies and jiffies_64 to the relative whitelist

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "H. Peter Anvin" <hpa@zytor.com>

commit ea17e7414bc62e8d3bde8d08e3df1d921c518c17 upstream.

The symbol jiffies is created in the linker script as an alias to
jiffies_64.  Unfortunately this is done outside any section, and
apparently GNU ld 2.21 doesn't carry the section with it, so we end up
with an absolute symbol and therefore a broken kernel.

Add jiffies and jiffies_64 to the whitelist.

The most disturbing bit with this discovery is that it shows that we
have had multiple linker bugs in this area crossing multiple
generations, and have been silently building bad kernels for some time.

Link: http://lkml.kernel.org/r/20120524171604.0d98284f3affc643e9714470@canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/tools/relocs.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -71,6 +71,7 @@ static const char * const sym_regex_kern
 	"__(start|stop)_notes|"
 	"__end_rodata|"
 	"__initramfs_start|"
+	"(jiffies|jiffies_64)|"
 	"_end)$"
 };
 

[ 82/94] x86/mce: Fix check for processor context when machine check was taken.

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Luck <tony.luck@intel.com>

commit 875e26648cf9b6db9d8dc07b7959d7c61fb3f49c upstream.

Linus pointed out that there was no value is checking whether m->ip
was zero - because zero is a legimate value.  If we have a reliable
(or faked in the VM86 case) "m->cs" we can use it to tell whether we
were in user mode or kernelwhen the machine check hit.

Reported-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/mcheck/mce-severity.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

--- a/arch/x86/kernel/cpu/mcheck/mce-severity.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c
@@ -145,15 +145,19 @@ static struct severity {
 };
 
 /*
- * If the EIPV bit is set, it means the saved IP is the
- * instruction which caused the MCE.
+ * If mcgstatus indicated that ip/cs on the stack were
+ * no good, then "m->cs" will be zero and we will have
+ * to assume the worst case (IN_KERNEL) as we actually
+ * have no idea what we were executing when the machine
+ * check hit.
+ * If we do have a good "m->cs" (or a faked one in the
+ * case we were executing in VM86 mode) we can use it to
+ * distinguish an exception taken in user from from one
+ * taken in the kernel.
  */
 static int error_context(struct mce *m)
 {
-	if (m->mcgstatus & MCG_STATUS_EIPV)
-		return (m->ip && (m->cs & 3) == 3) ? IN_USER : IN_KERNEL;
-	/* Unknown, assume kernel */
-	return IN_KERNEL;
+	return ((m->cs & 3) == 3) ? IN_USER : IN_KERNEL;
 }
 
 int mce_severity(struct mce *m, int tolerant, char **msg)

[ 83/94] mmc: sdio: avoid spurious calls to interrupt handlers

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Pitre <nicolas.pitre@linaro.org>

commit bbbc4c4d8c5face097d695f9bf3a39647ba6b7e7 upstream.

Commit 06e8935feb ("optimized SDIO IRQ handling for single irq")
introduced some spurious calls to SDIO function interrupt handlers,
such as when the SDIO IRQ thread is started, or the safety check
performed upon a system resume.  Let's add a flag to perform the
optimization only when a real interrupt is signaled by the host
driver and we know there is no point confirming it.

Reported-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/core/sdio.c     |    2 +-
 drivers/mmc/core/sdio_irq.c |   11 +++++++----
 include/linux/mmc/host.h    |    2 ++
 3 files changed, 10 insertions(+), 5 deletions(-)

--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -947,7 +947,7 @@ static int mmc_sdio_resume(struct mmc_ho
 	}
 
 	if (!err && host->sdio_irqs)
-		mmc_signal_sdio_irq(host);
+		wake_up_process(host->sdio_irq_thread);
 	mmc_release_host(host);
 
 	/*
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -28,18 +28,20 @@
 
 #include "sdio_ops.h"
 
-static int process_sdio_pending_irqs(struct mmc_card *card)
+static int process_sdio_pending_irqs(struct mmc_host *host)
 {
+	struct mmc_card *card = host->card;
 	int i, ret, count;
 	unsigned char pending;
 	struct sdio_func *func;
 
 	/*
 	 * Optimization, if there is only 1 function interrupt registered
-	 * call irq handler directly
+	 * and we know an IRQ was signaled then call irq handler directly.
+	 * Otherwise do the full probe.
 	 */
 	func = card->sdio_single_irq;
-	if (func) {
+	if (func && host->sdio_irq_pending) {
 		func->irq_handler(func);
 		return 1;
 	}
@@ -116,7 +118,8 @@ static int sdio_irq_thread(void *_host)
 		ret = __mmc_claim_host(host, &host->sdio_irq_thread_abort);
 		if (ret)
 			break;
-		ret = process_sdio_pending_irqs(host->card);
+		ret = process_sdio_pending_irqs(host);
+		host->sdio_irq_pending = false;
 		mmc_release_host(host);
 
 		/*
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -323,6 +323,7 @@ struct mmc_host {
 
 	unsigned int		sdio_irqs;
 	struct task_struct	*sdio_irq_thread;
+	bool			sdio_irq_pending;
 	atomic_t		sdio_irq_thread_abort;
 
 	mmc_pm_flag_t		pm_flags;	/* requested pm features */
@@ -378,6 +379,7 @@ extern int mmc_cache_ctrl(struct mmc_hos
 static inline void mmc_signal_sdio_irq(struct mmc_host *host)
 {
 	host->ops->enable_sdio_irq(host, 0);
+	host->sdio_irq_pending = true;
 	wake_up_process(host->sdio_irq_thread);
 }
 

[ 84/94] mmc: cd-gpio: protect against NULL context in mmc_cd_gpio_free()

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

commit 0e9f480bb553d39ee06ccd45639ba7a5446a7b81 upstream.

Do not oops, even if mmc_cd_gpio_free() is mistakenly called on a driver
cleanup path, even though a previous call to mmc_cd_gpio_request() failed.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
[stable@: please apply to 3.3-stable]
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/core/cd-gpio.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/mmc/core/cd-gpio.c
+++ b/drivers/mmc/core/cd-gpio.c
@@ -67,6 +67,9 @@ void mmc_cd_gpio_free(struct mmc_host *h
 {
 	struct mmc_cd_gpio *cd = host->hotplug.handler_priv;
 
+	if (!cd)
+		return;
+
 	free_irq(host->hotplug.irq, host);
 	gpio_free(cd->gpio);
 	kfree(cd);

[ 85/94] mmc: omap_hsmmc: pass IRQF_ONESHOT to request_threaded_irq

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ming Lei <ming.lei@canonical.com>

commit db35f83ef47b5f180f2670d11f5f93992314ea09 upstream.

The flag of IRQF_ONESHOT should be passed to request_threaded_irq,
otherwise the following failure message should be dumped because
hardware handler is defined as NULL:

[    3.383483] genirq: Threaded irq requested with handler=NULL and
!ONESHOT for irq 368
[    3.392730] omap_hsmmc: probe of omap_hsmmc.0 failed with error -22

The patch fixes one kernel hang bug which is caused by mmc card
probe failure and root device can't be brought up.

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Venkatraman S <svenkatr@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/omap_hsmmc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2034,7 +2034,7 @@ static int __init omap_hsmmc_probe(struc
 		ret = request_threaded_irq(mmc_slot(host).card_detect_irq,
 					   NULL,
 					   omap_hsmmc_detect,
-					   IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+					   IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 					   mmc_hostname(mmc), host);
 		if (ret) {
 			dev_dbg(mmc_dev(host->mmc),

[ 86/94] tile: fix bug where fls(0) was not returning 0

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Metcalf <cmetcalf@tilera.com>

commit 9f1d62bed7f015d11b9164078b7fea433b474114 upstream.

This is because __builtin_clz(0) returns 64 for the "undefined" case
of 0, since the builtin just does a right-shift 32 and "clz" instruction.
So, use the alpha approach of casting to u32 and using __builtin_clzll().

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/tile/include/asm/bitops.h |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/arch/tile/include/asm/bitops.h
+++ b/arch/tile/include/asm/bitops.h
@@ -77,6 +77,11 @@ static inline int ffs(int x)
 	return __builtin_ffs(x);
 }
 
+static inline int fls64(__u64 w)
+{
+	return (sizeof(__u64) * 8) - __builtin_clzll(w);
+}
+
 /**
  * fls - find last set bit in word
  * @x: the word to search
@@ -90,12 +95,7 @@ static inline int ffs(int x)
  */
 static inline int fls(int x)
 {
-	return (sizeof(int) * 8) - __builtin_clz(x);
-}
-
-static inline int fls64(__u64 w)
-{
-	return (sizeof(__u64) * 8) - __builtin_clzll(w);
+	return fls64((unsigned int) x);
 }
 
 static inline unsigned int __arch_hweight32(unsigned int w)

[ 87/94] intel-iommu: Add device info into list before doing context mapping

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Woodhouse <dwmw2@infradead.org>

commit e2ad23d04c1304431ab5176c89b7b476ded2d995 upstream.

Add device info into list before doing context mapping, because device
info will be used by iommu_enable_dev_iotlb(). Without it, ATS won't get
enabled as it should be.

ATS, while a dubious decision from a security point of view, can be very
important for performance.

Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/intel-iommu.c |   17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -2280,12 +2280,6 @@ static int domain_add_dev_info(struct dm
 	if (!info)
 		return -ENOMEM;
 
-	ret = domain_context_mapping(domain, pdev, translation);
-	if (ret) {
-		free_devinfo_mem(info);
-		return ret;
-	}
-
 	info->segment = pci_domain_nr(pdev->bus);
 	info->bus = pdev->bus->number;
 	info->devfn = pdev->devfn;
@@ -2298,6 +2292,17 @@ static int domain_add_dev_info(struct dm
 	pdev->dev.archdata.iommu = info;
 	spin_unlock_irqrestore(&device_domain_lock, flags);
 
+	ret = domain_context_mapping(domain, pdev, translation);
+	if (ret) {
+		spin_lock_irqsave(&device_domain_lock, flags);
+		list_del(&info->link);
+		list_del(&info->global);
+		pdev->dev.archdata.iommu = NULL;
+		spin_unlock_irqrestore(&device_domain_lock, flags);
+		free_devinfo_mem(info);
+		return ret;
+	}
+
 	return 0;
 }
 

[ 88/94] iommu: Fix off by one in dmar_get_fault_reason()

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit fefe1ed1398b81e3fadc92d11d91162d343c8836 upstream.

fault_reason - 0x20 == ARRAY_SIZE(irq_remap_fault_reasons) is
one past the end of the array.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: walter harms <wharms@bfs.de>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/20120513170938.GA4280@elgon.mountain
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.2: s/irq_remap_fault_reasons/intr_remap_fault_reasons/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/dmar.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -1056,8 +1056,8 @@ static const char *intr_remap_fault_reas
 
 const char *dmar_get_fault_reason(u8 fault_reason, int *fault_type)
 {
-	if (fault_reason >= 0x20 && (fault_reason <= 0x20 +
-				     ARRAY_SIZE(intr_remap_fault_reasons))) {
+	if (fault_reason >= 0x20 && (fault_reason - 0x20 <
+					ARRAY_SIZE(intr_remap_fault_reasons))) {
 		*fault_type = INTR_REMAP;
 		return intr_remap_fault_reasons[fault_reason - 0x20];
 	} else if (fault_reason < ARRAY_SIZE(dma_remap_fault_reasons)) {

[ 89/94] rtlwifi: fix for race condition when firmware is cached

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 574e02abaf816b582685805f0c1150ca9f1f18ee upstream.

In commit b0302ab, the rtlwifi family of drivers was converted to use
asynchronous firmware loading. Unfortumately, the implementation was
racy, and the ieee80211 routines could be started before rtl_init_core()
was called to setup the data.

This patch fixes the bug noted in https://bugzilla.kernel.org/show_bug.cgi?id=43187.

Reported-by: Joshua Roys <Joshua.Roys@gtri.gatech.edu>
Tested-by: Neptune Ning <frostyplanet@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/rtlwifi/pci.c |   17 +++++++++--------
 drivers/net/wireless/rtlwifi/usb.c |   12 ++++++------
 2 files changed, 15 insertions(+), 14 deletions(-)

--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -1865,14 +1865,6 @@ int __devinit rtl_pci_probe(struct pci_d
 	/*like read eeprom and so on */
 	rtlpriv->cfg->ops->read_eeprom_info(hw);
 
-	if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 ("Can't init_sw_vars.\n"));
-		goto fail3;
-	}
-
-	rtlpriv->cfg->ops->init_sw_leds(hw);
-
 	/*aspm */
 	rtl_pci_init_aspm(hw);
 
@@ -1892,6 +1884,15 @@ int __devinit rtl_pci_probe(struct pci_d
 		goto fail3;
 	}
 
+	if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Can't init_sw_vars.\n"));
+		err = -ENODEV;
+		goto fail3;
+	}
+
+	rtlpriv->cfg->ops->init_sw_leds(hw);
+
 	err = sysfs_create_group(&pdev->dev.kobj, &rtl_attribute_group);
 	if (err) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -970,12 +970,6 @@ int __devinit rtl_usb_probe(struct usb_i
 	rtlpriv->cfg->ops->read_chip_version(hw);
 	/*like read eeprom and so on */
 	rtlpriv->cfg->ops->read_eeprom_info(hw);
-	if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 ("Can't init_sw_vars.\n"));
-		goto error_out;
-	}
-	rtlpriv->cfg->ops->init_sw_leds(hw);
 	err = _rtl_usb_init(hw);
 	err = _rtl_usb_init_sw(hw);
 	/* Init mac80211 sw */
@@ -985,6 +979,12 @@ int __devinit rtl_usb_probe(struct usb_i
 			 ("Can't allocate sw for mac80211.\n"));
 		goto error_out;
 	}
+	if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Can't init_sw_vars.\n"));
+		goto error_out;
+	}
+	rtlpriv->cfg->ops->init_sw_leds(hw);
 
 	return 0;
 error_out:

[ 90/94] ARM: 7365/1: drop unused parameter from flush_cache_user_range

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1767 bytes --]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dima Zavin <dima@android.com>

commit 4542b6a0fa6b48d9ae6b41c1efeb618b7a221b2a upstream.

vma isn't used and flush_cache_user_range isn't a standard macro that
is used on several archs with the same prototype. In fact only unicore32
has a macro with the same name (with an identical implementation and no
in-tree users).

This is a part of a patch proposed by Dima Zavin (with Message-id:
1272439931-12795-1-git-send-email-dima@android.com) that didn't get
accepted.

Cc: Dima Zavin <dima@android.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 arch/arm/include/asm/cacheflush.h |    2 +-
 arch/arm/kernel/traps.c           |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -249,7 +249,7 @@ extern void flush_cache_page(struct vm_a
  * Harvard caches are synchronised for the user space address range.
  * This is used for the ARM private sys_cacheflush system call.
  */
-#define flush_cache_user_range(vma,start,end) \
+#define flush_cache_user_range(start,end) \
 	__cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end))
 
 /*
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -491,7 +491,7 @@ do_cache_op(unsigned long start, unsigne
 		if (end > vma->vm_end)
 			end = vma->vm_end;
 
-		flush_cache_user_range(vma, start, end);
+		flush_cache_user_range(start, end);
 	}
 	up_read(&mm->mmap_sem);
 }

[ 91/94] ARM: 7409/1: Do not call flush_cache_user_range with mmap_sem held

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dima Zavin <dima@android.com>

commit 435a7ef52db7d86e67a009b36cac1457f8972391 upstream.

We can't be holding the mmap_sem while calling flush_cache_user_range
because the flush can fault. If we fault on a user address, the
page fault handler will try to take mmap_sem again. Since both places
acquire the read lock, most of the time it succeeds. However, if another
thread tries to acquire the write lock on the mmap_sem (e.g. mmap) in
between the call to flush_cache_user_range and the fault, the down_read
in do_page_fault will deadlock.

[will: removed drop of vma parameter as already queued by rmk (7365/1)]

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/kernel/traps.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -491,7 +491,9 @@ do_cache_op(unsigned long start, unsigne
 		if (end > vma->vm_end)
 			end = vma->vm_end;
 
+		up_read(&mm->mmap_sem);
 		flush_cache_user_range(start, end);
+		return;
 	}
 	up_read(&mm->mmap_sem);
 }

[ 92/94] MCE: Fix vm86 handling for 32bit mce handler

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andi Kleen <andi@firstfloor.org>

commit a129a7c84582629741e5fa6f40026efcd7a65bd4 upstream.

When running on 32bit the mce handler could misinterpret
vm86 mode as ring 0. This can affect whether it does recovery
or not; it was possible to panic when recovery was actually
possible.

Fix this by always forcing vm86 to look like ring 3.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/mcheck/mce.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -437,6 +437,14 @@ static inline void mce_gather_info(struc
 		if (m->mcgstatus & (MCG_STATUS_RIPV|MCG_STATUS_EIPV)) {
 			m->ip = regs->ip;
 			m->cs = regs->cs;
+
+			/*
+			 * When in VM86 mode make the cs look like ring 3
+			 * always. This is a lie, but it's better than passing
+			 * the additional vm86 bit around everywhere.
+			 */
+			if (v8086_mode(regs))
+				m->cs |= 3;
 		}
 		/* Use accurate RIP reporting if available. */
 		if (rip_msr)

[ 93/94] i2c: davinci: Free requested IRQ in remove

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marcus Folkesson <marcus.folkesson@gmail.com>

commit 9868a060ccf769c08ec378a9829137e272e9a92c upstream.

The freed IRQ is not necessary the one requested in probe.
Even if it was, with two or more i2c-controllers it will fails anyway.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/i2c/busses/i2c-davinci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -755,7 +755,7 @@ static int davinci_i2c_remove(struct pla
 	dev->clk = NULL;
 
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0);
-	free_irq(IRQ_I2C, dev);
+	free_irq(dev->irq, dev);
 	iounmap(dev->base);
 	kfree(dev);
 

[ 94/94] i2c: tegra: notify transfer-complete after clearing status.

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Laxman Dewangan <ldewangan@nvidia.com>

commit c889e91d2cc22123f20f40dde0c0a91856a20eea upstream.

The notification of the transfer complete by calling complete()
should be done after clearing all interrupt status.
This avoids the race condition of misconfigure the i2c controller
in multi-core environment.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/i2c/busses/i2c-tegra.c |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -401,8 +401,6 @@ static irqreturn_t tegra_i2c_isr(int irq
 			disable_irq_nosync(i2c_dev->irq);
 			i2c_dev->irq_disabled = 1;
 		}
-
-		complete(&i2c_dev->msg_complete);
 		goto err;
 	}
 
@@ -411,7 +409,6 @@ static irqreturn_t tegra_i2c_isr(int irq
 			i2c_dev->msg_err |= I2C_ERR_NO_ACK;
 		if (status & I2C_INT_ARBITRATION_LOST)
 			i2c_dev->msg_err |= I2C_ERR_ARBITRATION_LOST;
-		complete(&i2c_dev->msg_complete);
 		goto err;
 	}
 
@@ -429,14 +426,14 @@ static irqreturn_t tegra_i2c_isr(int irq
 			tegra_i2c_mask_irq(i2c_dev, I2C_INT_TX_FIFO_DATA_REQ);
 	}
 
+	i2c_writel(i2c_dev, status, I2C_INT_STATUS);
+	if (i2c_dev->is_dvc)
+		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
+
 	if (status & I2C_INT_PACKET_XFER_COMPLETE) {
 		BUG_ON(i2c_dev->msg_buf_remaining);
 		complete(&i2c_dev->msg_complete);
 	}
-
-	i2c_writel(i2c_dev, status, I2C_INT_STATUS);
-	if (i2c_dev->is_dvc)
-		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
 	return IRQ_HANDLED;
 err:
 	/* An error occurred, mask all interrupts */
@@ -446,6 +443,8 @@ err:
 	i2c_writel(i2c_dev, status, I2C_INT_STATUS);
 	if (i2c_dev->is_dvc)
 		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
+
+	complete(&i2c_dev->msg_complete);
 	return IRQ_HANDLED;
 }
 

Re: [ 00/94] 3.3.8-stable review

[Greg KH]

On Sun, May 27, 2012 at 10:03:32AM +0900, Greg KH wrote:
> This is the start of the stable review cycle for the 3.3.8 release.

Ah, one thing I forgot to mention, I'd like this to be the last 3.3.y
release that I do.  3.4 is where people should be moving to, so, baring
anything massively wrong with this 3.3.8 release, I'll be marking it
"end-of-life" after it is released.

thanks,

greg k-h

Re: [ 10/94] iwlwifi: use 6000G2B for 6030 device series

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 794 bytes --]

On Sun, 2012-05-27 at 10:04 +0900, Greg KH wrote:
> 3.3-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
> 
> commit 35e7adaaf6932c5ffb22c6ec521734434c65adc5 upstream.
> 
> "iwlwifi: use correct released ucode version" change
> the ucode api ok from 6000G2 to 6000G2B, but it shall belong
> to 6030 device series, not the 6005 device series. Fix it
[...]

Again, I believe this and 11/94 'iwlwifi: use correct released ucode
version' are redundant.  Although in this series they cancel each other
out...

Ben.

-- 
Ben Hutchings
The obvious mathematical breakthrough [to break modern encryption] would be
development of an easy way to factor large prime numbers. - Bill Gates

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [ 76/94] x86, realmode: 16-bit real-mode code support for relocs tool

[Ben Hutchings]

[-- Attachment #1.1: Type: text/plain, Size: 1809 bytes --]

On Sun, 2012-05-27 at 10:05 +0900, Greg KH wrote:
> 3.3-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: "H. Peter Anvin" <hpa@linux.intel.com>
> 
> commit 6520fe5564acf07ade7b18a1272db1184835c487 upstream.
> 
> A new option is added to the relocs tool called '--realmode'.
> This option causes the generation of 16-bit segment relocations
> and 32-bit linear relocations for the real-mode code. When
> the real-mode code is moved to the low-memory during kernel
> initialization, these relocation entries can be used to
> relocate the code properly.
> 
> In the assembly code 16-bit segment relocations must be relative
> to the 'real_mode_seg' absolute symbol. Linear relocations must be
> relative to a symbol prefixed with 'pa_'.
> 
> 16-bit segment relocation is used to load cs:ip in 16-bit code.
> Linear relocations are used in the 32-bit code for relocatable
> data references. They are declared in the linker script of the
> real-mode code.
> 
> The relocs tool is moved to arch/x86/tools/relocs.c, and added new
> target archscripts that can be used to build scripts needed building
> an architecture.  be compiled before building the arch/x86 tree.
> 
> [ hpa: accelerating this because it detects invalid absolute
>   relocations, a serious bug in binutils 2.22.52.0.x which currently
>   produces bad kernels. ]
>
> [ jsakkine: applied against 3.3.7 ]
[...]

Are these relocs patches worth applying to 3.2.y as well?  This one
needs backporting (see attached).  The following 5 can be cleanly
cherry-picked after that.

Ben.

-- 
Ben Hutchings
The obvious mathematical breakthrough [to break modern encryption] would be
development of an easy way to factor large prime numbers. - Bill Gates

[-- Attachment #1.2: x86-realmode-16-bit-real-mode-code-support-for-relocs-tool.patch --]
[-- Type: text/x-patch, Size: 45256 bytes --]

From: "H. Peter Anvin" <hpa@linux.intel.com>
Date: Tue, 8 May 2012 21:22:24 +0300
Subject: [PATCH] x86, realmode: 16-bit real-mode code support for relocs tool

commit 6520fe5564acf07ade7b18a1272db1184835c487 upstream.

A new option is added to the relocs tool called '--realmode'.
This option causes the generation of 16-bit segment relocations
and 32-bit linear relocations for the real-mode code. When
the real-mode code is moved to the low-memory during kernel
initialization, these relocation entries can be used to
relocate the code properly.

In the assembly code 16-bit segment relocations must be relative
to the 'real_mode_seg' absolute symbol. Linear relocations must be
relative to a symbol prefixed with 'pa_'.

16-bit segment relocation is used to load cs:ip in 16-bit code.
Linear relocations are used in the 32-bit code for relocatable
data references. They are declared in the linker script of the
real-mode code.

The relocs tool is moved to arch/x86/tools/relocs.c, and added new
target archscripts that can be used to build scripts needed building
an architecture.  be compiled before building the arch/x86 tree.

[ hpa: accelerating this because it detects invalid absolute
  relocations, a serious bug in binutils 2.22.52.0.x which currently
  produces bad kernels. ]

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-2-git-send-email-jarkko.sakkinen@intel.com
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>
[bwh: Backported to 3.2:
 - Adjust context (no archheaders; no insn_sanity)
 - Expand put_unaligned_le32()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 Makefile                          |    8 +-
 arch/x86/Makefile                 |    3 +
 arch/x86/boot/compressed/Makefile |    9 +-
 arch/x86/boot/compressed/relocs.c |  680 -------------------------------
 arch/x86/tools/.gitignore         |    1 +
 arch/x86/tools/Makefile           |    3 +
 arch/x86/tools/relocs.c           |  799 +++++++++++++++++++++++++++++++++++++
 scripts/Makefile                  |    2 +
 8 files changed, 818 insertions(+), 687 deletions(-)
 delete mode 100644 arch/x86/boot/compressed/relocs.c
 create mode 100644 arch/x86/tools/.gitignore
 create mode 100644 arch/x86/tools/relocs.c

diff --git a/Makefile b/Makefile
index add68f1..680a70d 100644
--- a/Makefile
+++ b/Makefile
@@ -443,6 +443,7 @@ asm-generic:
 no-dot-config-targets := clean mrproper distclean \
 			 cscope gtags TAGS tags help %docs check% coccicheck \
 			 include/linux/version.h headers_% \
+			 include/linux/version.h headers_% archscripts \
 			 kernelversion %src-pkg
 
 config-targets := 0
@@ -979,7 +980,7 @@ prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \
                    include/config/auto.conf
 	$(cmd_crmodverdir)
 
-archprepare: prepare1 scripts_basic
+archprepare: archscripts prepare1 scripts_basic
 
 prepare0: archprepare FORCE
 	$(Q)$(MAKE) $(build)=.
@@ -1046,8 +1047,11 @@ hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
 # If we do an all arch process set dst to asm-$(hdr-arch)
 hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
 
+PHONY += archscripts
+archscripts:
+
 PHONY += __headers
-__headers: include/linux/version.h scripts_basic asm-generic FORCE
+__headers: include/linux/version.h scripts_basic asm-generic archscripts FORCE
 	$(Q)$(MAKE) $(build)=scripts build_unifdef
 
 PHONY += headers_install_all
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index b02e509..774fd16 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -117,6 +117,9 @@ KBUILD_CFLAGS += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
 KBUILD_CFLAGS += $(mflags-y)
 KBUILD_AFLAGS += $(mflags-y)
 
+archscripts:
+	$(Q)$(MAKE) $(build)=arch/x86/tools relocs
+
 ###
 # Kernel objects
 
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 09664ef..77453c6 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -31,13 +31,12 @@ OBJCOPYFLAGS_vmlinux.bin :=  -R .comment -S
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
+targets += vmlinux.bin.all vmlinux.relocs
 
-targets += vmlinux.bin.all vmlinux.relocs relocs
-hostprogs-$(CONFIG_X86_NEED_RELOCS) += relocs
-
+CMD_RELOCS = arch/x86/tools/relocs
 quiet_cmd_relocs = RELOCS  $@
-      cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
-$(obj)/vmlinux.relocs: vmlinux $(obj)/relocs FORCE
+      cmd_relocs = $(CMD_RELOCS) $< > $@;$(CMD_RELOCS) --abs-relocs $<
+$(obj)/vmlinux.relocs: vmlinux FORCE
 	$(call if_changed,relocs)
 
 vmlinux.bin.all-y := $(obj)/vmlinux.bin
diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c
deleted file mode 100644
index e77f4e4..0000000
--- a/arch/x86/boot/compressed/relocs.c
+++ /dev/null
@@ -1,680 +0,0 @@
-#include <stdio.h>
-#include <stdarg.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <string.h>
-#include <errno.h>
-#include <unistd.h>
-#include <elf.h>
-#include <byteswap.h>
-#define USE_BSD
-#include <endian.h>
-#include <regex.h>
-
-static void die(char *fmt, ...);
-
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-static Elf32_Ehdr ehdr;
-static unsigned long reloc_count, reloc_idx;
-static unsigned long *relocs;
-
-struct section {
-	Elf32_Shdr     shdr;
-	struct section *link;
-	Elf32_Sym      *symtab;
-	Elf32_Rel      *reltab;
-	char           *strtab;
-};
-static struct section *secs;
-
-/*
- * Following symbols have been audited. There values are constant and do
- * not change if bzImage is loaded at a different physical address than
- * the address for which it has been compiled. Don't warn user about
- * absolute relocations present w.r.t these symbols.
- */
-static const char abs_sym_regex[] =
-	"^(xen_irq_disable_direct_reloc$|"
-	"xen_save_fl_direct_reloc$|"
-	"VDSO|"
-	"__crc_)";
-static regex_t abs_sym_regex_c;
-static int is_abs_reloc(const char *sym_name)
-{
-	return !regexec(&abs_sym_regex_c, sym_name, 0, NULL, 0);
-}
-
-/*
- * These symbols are known to be relative, even if the linker marks them
- * as absolute (typically defined outside any section in the linker script.)
- */
-static const char rel_sym_regex[] =
-	"^_end$";
-static regex_t rel_sym_regex_c;
-static int is_rel_reloc(const char *sym_name)
-{
-	return !regexec(&rel_sym_regex_c, sym_name, 0, NULL, 0);
-}
-
-static void regex_init(void)
-{
-        char errbuf[128];
-        int err;
-	
-        err = regcomp(&abs_sym_regex_c, abs_sym_regex,
-                      REG_EXTENDED|REG_NOSUB);
-        if (err) {
-                regerror(err, &abs_sym_regex_c, errbuf, sizeof errbuf);
-                die("%s", errbuf);
-        }
-
-        err = regcomp(&rel_sym_regex_c, rel_sym_regex,
-                      REG_EXTENDED|REG_NOSUB);
-        if (err) {
-                regerror(err, &rel_sym_regex_c, errbuf, sizeof errbuf);
-                die("%s", errbuf);
-        }
-}
-
-static void die(char *fmt, ...)
-{
-	va_list ap;
-	va_start(ap, fmt);
-	vfprintf(stderr, fmt, ap);
-	va_end(ap);
-	exit(1);
-}
-
-static const char *sym_type(unsigned type)
-{
-	static const char *type_name[] = {
-#define SYM_TYPE(X) [X] = #X
-		SYM_TYPE(STT_NOTYPE),
-		SYM_TYPE(STT_OBJECT),
-		SYM_TYPE(STT_FUNC),
-		SYM_TYPE(STT_SECTION),
-		SYM_TYPE(STT_FILE),
-		SYM_TYPE(STT_COMMON),
-		SYM_TYPE(STT_TLS),
-#undef SYM_TYPE
-	};
-	const char *name = "unknown sym type name";
-	if (type < ARRAY_SIZE(type_name)) {
-		name = type_name[type];
-	}
-	return name;
-}
-
-static const char *sym_bind(unsigned bind)
-{
-	static const char *bind_name[] = {
-#define SYM_BIND(X) [X] = #X
-		SYM_BIND(STB_LOCAL),
-		SYM_BIND(STB_GLOBAL),
-		SYM_BIND(STB_WEAK),
-#undef SYM_BIND
-	};
-	const char *name = "unknown sym bind name";
-	if (bind < ARRAY_SIZE(bind_name)) {
-		name = bind_name[bind];
-	}
-	return name;
-}
-
-static const char *sym_visibility(unsigned visibility)
-{
-	static const char *visibility_name[] = {
-#define SYM_VISIBILITY(X) [X] = #X
-		SYM_VISIBILITY(STV_DEFAULT),
-		SYM_VISIBILITY(STV_INTERNAL),
-		SYM_VISIBILITY(STV_HIDDEN),
-		SYM_VISIBILITY(STV_PROTECTED),
-#undef SYM_VISIBILITY
-	};
-	const char *name = "unknown sym visibility name";
-	if (visibility < ARRAY_SIZE(visibility_name)) {
-		name = visibility_name[visibility];
-	}
-	return name;
-}
-
-static const char *rel_type(unsigned type)
-{
-	static const char *type_name[] = {
-#define REL_TYPE(X) [X] = #X
-		REL_TYPE(R_386_NONE),
-		REL_TYPE(R_386_32),
-		REL_TYPE(R_386_PC32),
-		REL_TYPE(R_386_GOT32),
-		REL_TYPE(R_386_PLT32),
-		REL_TYPE(R_386_COPY),
-		REL_TYPE(R_386_GLOB_DAT),
-		REL_TYPE(R_386_JMP_SLOT),
-		REL_TYPE(R_386_RELATIVE),
-		REL_TYPE(R_386_GOTOFF),
-		REL_TYPE(R_386_GOTPC),
-#undef REL_TYPE
-	};
-	const char *name = "unknown type rel type name";
-	if (type < ARRAY_SIZE(type_name) && type_name[type]) {
-		name = type_name[type];
-	}
-	return name;
-}
-
-static const char *sec_name(unsigned shndx)
-{
-	const char *sec_strtab;
-	const char *name;
-	sec_strtab = secs[ehdr.e_shstrndx].strtab;
-	name = "<noname>";
-	if (shndx < ehdr.e_shnum) {
-		name = sec_strtab + secs[shndx].shdr.sh_name;
-	}
-	else if (shndx == SHN_ABS) {
-		name = "ABSOLUTE";
-	}
-	else if (shndx == SHN_COMMON) {
-		name = "COMMON";
-	}
-	return name;
-}
-
-static const char *sym_name(const char *sym_strtab, Elf32_Sym *sym)
-{
-	const char *name;
-	name = "<noname>";
-	if (sym->st_name) {
-		name = sym_strtab + sym->st_name;
-	}
-	else {
-		name = sec_name(secs[sym->st_shndx].shdr.sh_name);
-	}
-	return name;
-}
-
-
-
-#if BYTE_ORDER == LITTLE_ENDIAN
-#define le16_to_cpu(val) (val)
-#define le32_to_cpu(val) (val)
-#endif
-#if BYTE_ORDER == BIG_ENDIAN
-#define le16_to_cpu(val) bswap_16(val)
-#define le32_to_cpu(val) bswap_32(val)
-#endif
-
-static uint16_t elf16_to_cpu(uint16_t val)
-{
-	return le16_to_cpu(val);
-}
-
-static uint32_t elf32_to_cpu(uint32_t val)
-{
-	return le32_to_cpu(val);
-}
-
-static void read_ehdr(FILE *fp)
-{
-	if (fread(&ehdr, sizeof(ehdr), 1, fp) != 1) {
-		die("Cannot read ELF header: %s\n",
-			strerror(errno));
-	}
-	if (memcmp(ehdr.e_ident, ELFMAG, SELFMAG) != 0) {
-		die("No ELF magic\n");
-	}
-	if (ehdr.e_ident[EI_CLASS] != ELFCLASS32) {
-		die("Not a 32 bit executable\n");
-	}
-	if (ehdr.e_ident[EI_DATA] != ELFDATA2LSB) {
-		die("Not a LSB ELF executable\n");
-	}
-	if (ehdr.e_ident[EI_VERSION] != EV_CURRENT) {
-		die("Unknown ELF version\n");
-	}
-	/* Convert the fields to native endian */
-	ehdr.e_type      = elf16_to_cpu(ehdr.e_type);
-	ehdr.e_machine   = elf16_to_cpu(ehdr.e_machine);
-	ehdr.e_version   = elf32_to_cpu(ehdr.e_version);
-	ehdr.e_entry     = elf32_to_cpu(ehdr.e_entry);
-	ehdr.e_phoff     = elf32_to_cpu(ehdr.e_phoff);
-	ehdr.e_shoff     = elf32_to_cpu(ehdr.e_shoff);
-	ehdr.e_flags     = elf32_to_cpu(ehdr.e_flags);
-	ehdr.e_ehsize    = elf16_to_cpu(ehdr.e_ehsize);
-	ehdr.e_phentsize = elf16_to_cpu(ehdr.e_phentsize);
-	ehdr.e_phnum     = elf16_to_cpu(ehdr.e_phnum);
-	ehdr.e_shentsize = elf16_to_cpu(ehdr.e_shentsize);
-	ehdr.e_shnum     = elf16_to_cpu(ehdr.e_shnum);
-	ehdr.e_shstrndx  = elf16_to_cpu(ehdr.e_shstrndx);
-
-	if ((ehdr.e_type != ET_EXEC) && (ehdr.e_type != ET_DYN)) {
-		die("Unsupported ELF header type\n");
-	}
-	if (ehdr.e_machine != EM_386) {
-		die("Not for x86\n");
-	}
-	if (ehdr.e_version != EV_CURRENT) {
-		die("Unknown ELF version\n");
-	}
-	if (ehdr.e_ehsize != sizeof(Elf32_Ehdr)) {
-		die("Bad Elf header size\n");
-	}
-	if (ehdr.e_phentsize != sizeof(Elf32_Phdr)) {
-		die("Bad program header entry\n");
-	}
-	if (ehdr.e_shentsize != sizeof(Elf32_Shdr)) {
-		die("Bad section header entry\n");
-	}
-	if (ehdr.e_shstrndx >= ehdr.e_shnum) {
-		die("String table index out of bounds\n");
-	}
-}
-
-static void read_shdrs(FILE *fp)
-{
-	int i;
-	Elf32_Shdr shdr;
-
-	secs = calloc(ehdr.e_shnum, sizeof(struct section));
-	if (!secs) {
-		die("Unable to allocate %d section headers\n",
-		    ehdr.e_shnum);
-	}
-	if (fseek(fp, ehdr.e_shoff, SEEK_SET) < 0) {
-		die("Seek to %d failed: %s\n",
-			ehdr.e_shoff, strerror(errno));
-	}
-	for (i = 0; i < ehdr.e_shnum; i++) {
-		struct section *sec = &secs[i];
-		if (fread(&shdr, sizeof shdr, 1, fp) != 1)
-			die("Cannot read ELF section headers %d/%d: %s\n",
-			    i, ehdr.e_shnum, strerror(errno));
-		sec->shdr.sh_name      = elf32_to_cpu(shdr.sh_name);
-		sec->shdr.sh_type      = elf32_to_cpu(shdr.sh_type);
-		sec->shdr.sh_flags     = elf32_to_cpu(shdr.sh_flags);
-		sec->shdr.sh_addr      = elf32_to_cpu(shdr.sh_addr);
-		sec->shdr.sh_offset    = elf32_to_cpu(shdr.sh_offset);
-		sec->shdr.sh_size      = elf32_to_cpu(shdr.sh_size);
-		sec->shdr.sh_link      = elf32_to_cpu(shdr.sh_link);
-		sec->shdr.sh_info      = elf32_to_cpu(shdr.sh_info);
-		sec->shdr.sh_addralign = elf32_to_cpu(shdr.sh_addralign);
-		sec->shdr.sh_entsize   = elf32_to_cpu(shdr.sh_entsize);
-		if (sec->shdr.sh_link < ehdr.e_shnum)
-			sec->link = &secs[sec->shdr.sh_link];
-	}
-
-}
-
-static void read_strtabs(FILE *fp)
-{
-	int i;
-	for (i = 0; i < ehdr.e_shnum; i++) {
-		struct section *sec = &secs[i];
-		if (sec->shdr.sh_type != SHT_STRTAB) {
-			continue;
-		}
-		sec->strtab = malloc(sec->shdr.sh_size);
-		if (!sec->strtab) {
-			die("malloc of %d bytes for strtab failed\n",
-				sec->shdr.sh_size);
-		}
-		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
-			die("Seek to %d failed: %s\n",
-				sec->shdr.sh_offset, strerror(errno));
-		}
-		if (fread(sec->strtab, 1, sec->shdr.sh_size, fp)
-		    != sec->shdr.sh_size) {
-			die("Cannot read symbol table: %s\n",
-				strerror(errno));
-		}
-	}
-}
-
-static void read_symtabs(FILE *fp)
-{
-	int i,j;
-	for (i = 0; i < ehdr.e_shnum; i++) {
-		struct section *sec = &secs[i];
-		if (sec->shdr.sh_type != SHT_SYMTAB) {
-			continue;
-		}
-		sec->symtab = malloc(sec->shdr.sh_size);
-		if (!sec->symtab) {
-			die("malloc of %d bytes for symtab failed\n",
-				sec->shdr.sh_size);
-		}
-		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
-			die("Seek to %d failed: %s\n",
-				sec->shdr.sh_offset, strerror(errno));
-		}
-		if (fread(sec->symtab, 1, sec->shdr.sh_size, fp)
-		    != sec->shdr.sh_size) {
-			die("Cannot read symbol table: %s\n",
-				strerror(errno));
-		}
-		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Sym); j++) {
-			Elf32_Sym *sym = &sec->symtab[j];
-			sym->st_name  = elf32_to_cpu(sym->st_name);
-			sym->st_value = elf32_to_cpu(sym->st_value);
-			sym->st_size  = elf32_to_cpu(sym->st_size);
-			sym->st_shndx = elf16_to_cpu(sym->st_shndx);
-		}
-	}
-}
-
-
-static void read_relocs(FILE *fp)
-{
-	int i,j;
-	for (i = 0; i < ehdr.e_shnum; i++) {
-		struct section *sec = &secs[i];
-		if (sec->shdr.sh_type != SHT_REL) {
-			continue;
-		}
-		sec->reltab = malloc(sec->shdr.sh_size);
-		if (!sec->reltab) {
-			die("malloc of %d bytes for relocs failed\n",
-				sec->shdr.sh_size);
-		}
-		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
-			die("Seek to %d failed: %s\n",
-				sec->shdr.sh_offset, strerror(errno));
-		}
-		if (fread(sec->reltab, 1, sec->shdr.sh_size, fp)
-		    != sec->shdr.sh_size) {
-			die("Cannot read symbol table: %s\n",
-				strerror(errno));
-		}
-		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
-			Elf32_Rel *rel = &sec->reltab[j];
-			rel->r_offset = elf32_to_cpu(rel->r_offset);
-			rel->r_info   = elf32_to_cpu(rel->r_info);
-		}
-	}
-}
-
-
-static void print_absolute_symbols(void)
-{
-	int i;
-	printf("Absolute symbols\n");
-	printf(" Num:    Value Size  Type       Bind        Visibility  Name\n");
-	for (i = 0; i < ehdr.e_shnum; i++) {
-		struct section *sec = &secs[i];
-		char *sym_strtab;
-		int j;
-
-		if (sec->shdr.sh_type != SHT_SYMTAB) {
-			continue;
-		}
-		sym_strtab = sec->link->strtab;
-		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Sym); j++) {
-			Elf32_Sym *sym;
-			const char *name;
-			sym = &sec->symtab[j];
-			name = sym_name(sym_strtab, sym);
-			if (sym->st_shndx != SHN_ABS) {
-				continue;
-			}
-			printf("%5d %08x %5d %10s %10s %12s %s\n",
-				j, sym->st_value, sym->st_size,
-				sym_type(ELF32_ST_TYPE(sym->st_info)),
-				sym_bind(ELF32_ST_BIND(sym->st_info)),
-				sym_visibility(ELF32_ST_VISIBILITY(sym->st_other)),
-				name);
-		}
-	}
-	printf("\n");
-}
-
-static void print_absolute_relocs(void)
-{
-	int i, printed = 0;
-
-	for (i = 0; i < ehdr.e_shnum; i++) {
-		struct section *sec = &secs[i];
-		struct section *sec_applies, *sec_symtab;
-		char *sym_strtab;
-		Elf32_Sym *sh_symtab;
-		int j;
-		if (sec->shdr.sh_type != SHT_REL) {
-			continue;
-		}
-		sec_symtab  = sec->link;
-		sec_applies = &secs[sec->shdr.sh_info];
-		if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) {
-			continue;
-		}
-		sh_symtab  = sec_symtab->symtab;
-		sym_strtab = sec_symtab->link->strtab;
-		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
-			Elf32_Rel *rel;
-			Elf32_Sym *sym;
-			const char *name;
-			rel = &sec->reltab[j];
-			sym = &sh_symtab[ELF32_R_SYM(rel->r_info)];
-			name = sym_name(sym_strtab, sym);
-			if (sym->st_shndx != SHN_ABS) {
-				continue;
-			}
-
-			/* Absolute symbols are not relocated if bzImage is
-			 * loaded at a non-compiled address. Display a warning
-			 * to user at compile time about the absolute
-			 * relocations present.
-			 *
-			 * User need to audit the code to make sure
-			 * some symbols which should have been section
-			 * relative have not become absolute because of some
-			 * linker optimization or wrong programming usage.
-			 *
-			 * Before warning check if this absolute symbol
-			 * relocation is harmless.
-			 */
-			if (is_abs_reloc(name) || is_rel_reloc(name))
-				continue;
-
-			if (!printed) {
-				printf("WARNING: Absolute relocations"
-					" present\n");
-				printf("Offset     Info     Type     Sym.Value "
-					"Sym.Name\n");
-				printed = 1;
-			}
-
-			printf("%08x %08x %10s %08x  %s\n",
-				rel->r_offset,
-				rel->r_info,
-				rel_type(ELF32_R_TYPE(rel->r_info)),
-				sym->st_value,
-				name);
-		}
-	}
-
-	if (printed)
-		printf("\n");
-}
-
-static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym))
-{
-	int i;
-	/* Walk through the relocations */
-	for (i = 0; i < ehdr.e_shnum; i++) {
-		char *sym_strtab;
-		Elf32_Sym *sh_symtab;
-		struct section *sec_applies, *sec_symtab;
-		int j;
-		struct section *sec = &secs[i];
-
-		if (sec->shdr.sh_type != SHT_REL) {
-			continue;
-		}
-		sec_symtab  = sec->link;
-		sec_applies = &secs[sec->shdr.sh_info];
-		if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) {
-			continue;
-		}
-		sh_symtab = sec_symtab->symtab;
-		sym_strtab = sec_symtab->link->strtab;
-		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
-			Elf32_Rel *rel;
-			Elf32_Sym *sym;
-			unsigned r_type;
-			rel = &sec->reltab[j];
-			sym = &sh_symtab[ELF32_R_SYM(rel->r_info)];
-			r_type = ELF32_R_TYPE(rel->r_info);
-			/* Don't visit relocations to absolute symbols */
-			if (sym->st_shndx == SHN_ABS &&
-			    !is_rel_reloc(sym_name(sym_strtab, sym))) {
-				continue;
-			}
-			switch (r_type) {
-			case R_386_NONE:
-			case R_386_PC32:
-				/*
-				 * NONE can be ignored and and PC relative
-				 * relocations don't need to be adjusted.
-				 */
-				break;
-			case R_386_32:
-				/* Visit relocations that need to be adjusted */
-				visit(rel, sym);
-				break;
-			default:
-				die("Unsupported relocation type: %s (%d)\n",
-				    rel_type(r_type), r_type);
-				break;
-			}
-		}
-	}
-}
-
-static void count_reloc(Elf32_Rel *rel, Elf32_Sym *sym)
-{
-	reloc_count += 1;
-}
-
-static void collect_reloc(Elf32_Rel *rel, Elf32_Sym *sym)
-{
-	/* Remember the address that needs to be adjusted. */
-	relocs[reloc_idx++] = rel->r_offset;
-}
-
-static int cmp_relocs(const void *va, const void *vb)
-{
-	const unsigned long *a, *b;
-	a = va; b = vb;
-	return (*a == *b)? 0 : (*a > *b)? 1 : -1;
-}
-
-static void emit_relocs(int as_text)
-{
-	int i;
-	/* Count how many relocations I have and allocate space for them. */
-	reloc_count = 0;
-	walk_relocs(count_reloc);
-	relocs = malloc(reloc_count * sizeof(relocs[0]));
-	if (!relocs) {
-		die("malloc of %d entries for relocs failed\n",
-			reloc_count);
-	}
-	/* Collect up the relocations */
-	reloc_idx = 0;
-	walk_relocs(collect_reloc);
-
-	/* Order the relocations for more efficient processing */
-	qsort(relocs, reloc_count, sizeof(relocs[0]), cmp_relocs);
-
-	/* Print the relocations */
-	if (as_text) {
-		/* Print the relocations in a form suitable that
-		 * gas will like.
-		 */
-		printf(".section \".data.reloc\",\"a\"\n");
-		printf(".balign 4\n");
-		for (i = 0; i < reloc_count; i++) {
-			printf("\t .long 0x%08lx\n", relocs[i]);
-		}
-		printf("\n");
-	}
-	else {
-		unsigned char buf[4];
-		/* Print a stop */
-		fwrite("\0\0\0\0", 4, 1, stdout);
-		/* Now print each relocation */
-		for (i = 0; i < reloc_count; i++) {
-			buf[0] = (relocs[i] >>  0) & 0xff;
-			buf[1] = (relocs[i] >>  8) & 0xff;
-			buf[2] = (relocs[i] >> 16) & 0xff;
-			buf[3] = (relocs[i] >> 24) & 0xff;
-			fwrite(buf, 4, 1, stdout);
-		}
-	}
-}
-
-static void usage(void)
-{
-	die("relocs [--abs-syms |--abs-relocs | --text] vmlinux\n");
-}
-
-int main(int argc, char **argv)
-{
-	int show_absolute_syms, show_absolute_relocs;
-	int as_text;
-	const char *fname;
-	FILE *fp;
-	int i;
-
-	regex_init();
-
-	show_absolute_syms = 0;
-	show_absolute_relocs = 0;
-	as_text = 0;
-	fname = NULL;
-	for (i = 1; i < argc; i++) {
-		char *arg = argv[i];
-		if (*arg == '-') {
-			if (strcmp(argv[1], "--abs-syms") == 0) {
-				show_absolute_syms = 1;
-				continue;
-			}
-
-			if (strcmp(argv[1], "--abs-relocs") == 0) {
-				show_absolute_relocs = 1;
-				continue;
-			}
-			else if (strcmp(argv[1], "--text") == 0) {
-				as_text = 1;
-				continue;
-			}
-		}
-		else if (!fname) {
-			fname = arg;
-			continue;
-		}
-		usage();
-	}
-	if (!fname) {
-		usage();
-	}
-	fp = fopen(fname, "r");
-	if (!fp) {
-		die("Cannot open %s: %s\n",
-			fname, strerror(errno));
-	}
-	read_ehdr(fp);
-	read_shdrs(fp);
-	read_strtabs(fp);
-	read_symtabs(fp);
-	read_relocs(fp);
-	if (show_absolute_syms) {
-		print_absolute_symbols();
-		return 0;
-	}
-	if (show_absolute_relocs) {
-		print_absolute_relocs();
-		return 0;
-	}
-	emit_relocs(as_text);
-	return 0;
-}
diff --git a/arch/x86/tools/.gitignore b/arch/x86/tools/.gitignore
new file mode 100644
index 0000000..be0ed06
--- /dev/null
+++ b/arch/x86/tools/.gitignore
@@ -0,0 +1 @@
+relocs
diff --git a/arch/x86/tools/Makefile b/arch/x86/tools/Makefile
index f820826..162a34a 100644
--- a/arch/x86/tools/Makefile
+++ b/arch/x86/tools/Makefile
@@ -29,3 +29,6 @@ HOSTCFLAGS_test_get_len.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/
 # Dependencies are also needed.
 $(obj)/test_get_len.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c
 
+HOST_EXTRACFLAGS += -I$(srctree)/tools/include
+hostprogs-y	+= relocs
+relocs: $(obj)/relocs
diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
new file mode 100644
index 0000000..2071bad
--- /dev/null
+++ b/arch/x86/tools/relocs.c
@@ -0,0 +1,799 @@
+#include <stdio.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include <elf.h>
+#include <byteswap.h>
+#define USE_BSD
+#include <endian.h>
+#include <regex.h>
+
+static void die(char *fmt, ...);
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+static Elf32_Ehdr ehdr;
+static unsigned long reloc_count, reloc_idx;
+static unsigned long *relocs;
+static unsigned long reloc16_count, reloc16_idx;
+static unsigned long *relocs16;
+
+struct section {
+	Elf32_Shdr     shdr;
+	struct section *link;
+	Elf32_Sym      *symtab;
+	Elf32_Rel      *reltab;
+	char           *strtab;
+};
+static struct section *secs;
+
+enum symtype {
+	S_ABS,
+	S_REL,
+	S_SEG,
+	S_LIN,
+	S_NSYMTYPES
+};
+
+static const char * const sym_regex_kernel[S_NSYMTYPES] = {
+/*
+ * Following symbols have been audited. There values are constant and do
+ * not change if bzImage is loaded at a different physical address than
+ * the address for which it has been compiled. Don't warn user about
+ * absolute relocations present w.r.t these symbols.
+ */
+	[S_ABS] =
+	"^(xen_irq_disable_direct_reloc$|"
+	"xen_save_fl_direct_reloc$|"
+	"VDSO|"
+	"__crc_)",
+
+/*
+ * These symbols are known to be relative, even if the linker marks them
+ * as absolute (typically defined outside any section in the linker script.)
+ */
+	[S_REL] =
+	"^_end$",
+};
+
+
+static const char * const sym_regex_realmode[S_NSYMTYPES] = {
+/*
+ * These are 16-bit segment symbols when compiling 16-bit code.
+ */
+	[S_SEG] =
+	"^real_mode_seg$",
+
+/*
+ * These are offsets belonging to segments, as opposed to linear addresses,
+ * when compiling 16-bit code.
+ */
+	[S_LIN] =
+	"^pa_",
+};
+
+static const char * const *sym_regex;
+
+static regex_t sym_regex_c[S_NSYMTYPES];
+static int is_reloc(enum symtype type, const char *sym_name)
+{
+	return sym_regex[type] &&
+		!regexec(&sym_regex_c[type], sym_name, 0, NULL, 0);
+}
+
+static void regex_init(int use_real_mode)
+{
+        char errbuf[128];
+        int err;
+	int i;
+
+	if (use_real_mode)
+		sym_regex = sym_regex_realmode;
+	else
+		sym_regex = sym_regex_kernel;
+
+	for (i = 0; i < S_NSYMTYPES; i++) {
+		if (!sym_regex[i])
+			continue;
+
+		err = regcomp(&sym_regex_c[i], sym_regex[i],
+			      REG_EXTENDED|REG_NOSUB);
+
+		if (err) {
+			regerror(err, &sym_regex_c[i], errbuf, sizeof errbuf);
+			die("%s", errbuf);
+		}
+        }
+}
+
+static void die(char *fmt, ...)
+{
+	va_list ap;
+	va_start(ap, fmt);
+	vfprintf(stderr, fmt, ap);
+	va_end(ap);
+	exit(1);
+}
+
+static const char *sym_type(unsigned type)
+{
+	static const char *type_name[] = {
+#define SYM_TYPE(X) [X] = #X
+		SYM_TYPE(STT_NOTYPE),
+		SYM_TYPE(STT_OBJECT),
+		SYM_TYPE(STT_FUNC),
+		SYM_TYPE(STT_SECTION),
+		SYM_TYPE(STT_FILE),
+		SYM_TYPE(STT_COMMON),
+		SYM_TYPE(STT_TLS),
+#undef SYM_TYPE
+	};
+	const char *name = "unknown sym type name";
+	if (type < ARRAY_SIZE(type_name)) {
+		name = type_name[type];
+	}
+	return name;
+}
+
+static const char *sym_bind(unsigned bind)
+{
+	static const char *bind_name[] = {
+#define SYM_BIND(X) [X] = #X
+		SYM_BIND(STB_LOCAL),
+		SYM_BIND(STB_GLOBAL),
+		SYM_BIND(STB_WEAK),
+#undef SYM_BIND
+	};
+	const char *name = "unknown sym bind name";
+	if (bind < ARRAY_SIZE(bind_name)) {
+		name = bind_name[bind];
+	}
+	return name;
+}
+
+static const char *sym_visibility(unsigned visibility)
+{
+	static const char *visibility_name[] = {
+#define SYM_VISIBILITY(X) [X] = #X
+		SYM_VISIBILITY(STV_DEFAULT),
+		SYM_VISIBILITY(STV_INTERNAL),
+		SYM_VISIBILITY(STV_HIDDEN),
+		SYM_VISIBILITY(STV_PROTECTED),
+#undef SYM_VISIBILITY
+	};
+	const char *name = "unknown sym visibility name";
+	if (visibility < ARRAY_SIZE(visibility_name)) {
+		name = visibility_name[visibility];
+	}
+	return name;
+}
+
+static const char *rel_type(unsigned type)
+{
+	static const char *type_name[] = {
+#define REL_TYPE(X) [X] = #X
+		REL_TYPE(R_386_NONE),
+		REL_TYPE(R_386_32),
+		REL_TYPE(R_386_PC32),
+		REL_TYPE(R_386_GOT32),
+		REL_TYPE(R_386_PLT32),
+		REL_TYPE(R_386_COPY),
+		REL_TYPE(R_386_GLOB_DAT),
+		REL_TYPE(R_386_JMP_SLOT),
+		REL_TYPE(R_386_RELATIVE),
+		REL_TYPE(R_386_GOTOFF),
+		REL_TYPE(R_386_GOTPC),
+		REL_TYPE(R_386_8),
+		REL_TYPE(R_386_PC8),
+		REL_TYPE(R_386_16),
+		REL_TYPE(R_386_PC16),
+#undef REL_TYPE
+	};
+	const char *name = "unknown type rel type name";
+	if (type < ARRAY_SIZE(type_name) && type_name[type]) {
+		name = type_name[type];
+	}
+	return name;
+}
+
+static const char *sec_name(unsigned shndx)
+{
+	const char *sec_strtab;
+	const char *name;
+	sec_strtab = secs[ehdr.e_shstrndx].strtab;
+	name = "<noname>";
+	if (shndx < ehdr.e_shnum) {
+		name = sec_strtab + secs[shndx].shdr.sh_name;
+	}
+	else if (shndx == SHN_ABS) {
+		name = "ABSOLUTE";
+	}
+	else if (shndx == SHN_COMMON) {
+		name = "COMMON";
+	}
+	return name;
+}
+
+static const char *sym_name(const char *sym_strtab, Elf32_Sym *sym)
+{
+	const char *name;
+	name = "<noname>";
+	if (sym->st_name) {
+		name = sym_strtab + sym->st_name;
+	}
+	else {
+		name = sec_name(sym->st_shndx);
+	}
+	return name;
+}
+
+
+
+#if BYTE_ORDER == LITTLE_ENDIAN
+#define le16_to_cpu(val) (val)
+#define le32_to_cpu(val) (val)
+#endif
+#if BYTE_ORDER == BIG_ENDIAN
+#define le16_to_cpu(val) bswap_16(val)
+#define le32_to_cpu(val) bswap_32(val)
+#endif
+
+static uint16_t elf16_to_cpu(uint16_t val)
+{
+	return le16_to_cpu(val);
+}
+
+static uint32_t elf32_to_cpu(uint32_t val)
+{
+	return le32_to_cpu(val);
+}
+
+static void read_ehdr(FILE *fp)
+{
+	if (fread(&ehdr, sizeof(ehdr), 1, fp) != 1) {
+		die("Cannot read ELF header: %s\n",
+			strerror(errno));
+	}
+	if (memcmp(ehdr.e_ident, ELFMAG, SELFMAG) != 0) {
+		die("No ELF magic\n");
+	}
+	if (ehdr.e_ident[EI_CLASS] != ELFCLASS32) {
+		die("Not a 32 bit executable\n");
+	}
+	if (ehdr.e_ident[EI_DATA] != ELFDATA2LSB) {
+		die("Not a LSB ELF executable\n");
+	}
+	if (ehdr.e_ident[EI_VERSION] != EV_CURRENT) {
+		die("Unknown ELF version\n");
+	}
+	/* Convert the fields to native endian */
+	ehdr.e_type      = elf16_to_cpu(ehdr.e_type);
+	ehdr.e_machine   = elf16_to_cpu(ehdr.e_machine);
+	ehdr.e_version   = elf32_to_cpu(ehdr.e_version);
+	ehdr.e_entry     = elf32_to_cpu(ehdr.e_entry);
+	ehdr.e_phoff     = elf32_to_cpu(ehdr.e_phoff);
+	ehdr.e_shoff     = elf32_to_cpu(ehdr.e_shoff);
+	ehdr.e_flags     = elf32_to_cpu(ehdr.e_flags);
+	ehdr.e_ehsize    = elf16_to_cpu(ehdr.e_ehsize);
+	ehdr.e_phentsize = elf16_to_cpu(ehdr.e_phentsize);
+	ehdr.e_phnum     = elf16_to_cpu(ehdr.e_phnum);
+	ehdr.e_shentsize = elf16_to_cpu(ehdr.e_shentsize);
+	ehdr.e_shnum     = elf16_to_cpu(ehdr.e_shnum);
+	ehdr.e_shstrndx  = elf16_to_cpu(ehdr.e_shstrndx);
+
+	if ((ehdr.e_type != ET_EXEC) && (ehdr.e_type != ET_DYN)) {
+		die("Unsupported ELF header type\n");
+	}
+	if (ehdr.e_machine != EM_386) {
+		die("Not for x86\n");
+	}
+	if (ehdr.e_version != EV_CURRENT) {
+		die("Unknown ELF version\n");
+	}
+	if (ehdr.e_ehsize != sizeof(Elf32_Ehdr)) {
+		die("Bad Elf header size\n");
+	}
+	if (ehdr.e_phentsize != sizeof(Elf32_Phdr)) {
+		die("Bad program header entry\n");
+	}
+	if (ehdr.e_shentsize != sizeof(Elf32_Shdr)) {
+		die("Bad section header entry\n");
+	}
+	if (ehdr.e_shstrndx >= ehdr.e_shnum) {
+		die("String table index out of bounds\n");
+	}
+}
+
+static void read_shdrs(FILE *fp)
+{
+	int i;
+	Elf32_Shdr shdr;
+
+	secs = calloc(ehdr.e_shnum, sizeof(struct section));
+	if (!secs) {
+		die("Unable to allocate %d section headers\n",
+		    ehdr.e_shnum);
+	}
+	if (fseek(fp, ehdr.e_shoff, SEEK_SET) < 0) {
+		die("Seek to %d failed: %s\n",
+			ehdr.e_shoff, strerror(errno));
+	}
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		if (fread(&shdr, sizeof shdr, 1, fp) != 1)
+			die("Cannot read ELF section headers %d/%d: %s\n",
+			    i, ehdr.e_shnum, strerror(errno));
+		sec->shdr.sh_name      = elf32_to_cpu(shdr.sh_name);
+		sec->shdr.sh_type      = elf32_to_cpu(shdr.sh_type);
+		sec->shdr.sh_flags     = elf32_to_cpu(shdr.sh_flags);
+		sec->shdr.sh_addr      = elf32_to_cpu(shdr.sh_addr);
+		sec->shdr.sh_offset    = elf32_to_cpu(shdr.sh_offset);
+		sec->shdr.sh_size      = elf32_to_cpu(shdr.sh_size);
+		sec->shdr.sh_link      = elf32_to_cpu(shdr.sh_link);
+		sec->shdr.sh_info      = elf32_to_cpu(shdr.sh_info);
+		sec->shdr.sh_addralign = elf32_to_cpu(shdr.sh_addralign);
+		sec->shdr.sh_entsize   = elf32_to_cpu(shdr.sh_entsize);
+		if (sec->shdr.sh_link < ehdr.e_shnum)
+			sec->link = &secs[sec->shdr.sh_link];
+	}
+
+}
+
+static void read_strtabs(FILE *fp)
+{
+	int i;
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		if (sec->shdr.sh_type != SHT_STRTAB) {
+			continue;
+		}
+		sec->strtab = malloc(sec->shdr.sh_size);
+		if (!sec->strtab) {
+			die("malloc of %d bytes for strtab failed\n",
+				sec->shdr.sh_size);
+		}
+		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
+			die("Seek to %d failed: %s\n",
+				sec->shdr.sh_offset, strerror(errno));
+		}
+		if (fread(sec->strtab, 1, sec->shdr.sh_size, fp)
+		    != sec->shdr.sh_size) {
+			die("Cannot read symbol table: %s\n",
+				strerror(errno));
+		}
+	}
+}
+
+static void read_symtabs(FILE *fp)
+{
+	int i,j;
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		if (sec->shdr.sh_type != SHT_SYMTAB) {
+			continue;
+		}
+		sec->symtab = malloc(sec->shdr.sh_size);
+		if (!sec->symtab) {
+			die("malloc of %d bytes for symtab failed\n",
+				sec->shdr.sh_size);
+		}
+		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
+			die("Seek to %d failed: %s\n",
+				sec->shdr.sh_offset, strerror(errno));
+		}
+		if (fread(sec->symtab, 1, sec->shdr.sh_size, fp)
+		    != sec->shdr.sh_size) {
+			die("Cannot read symbol table: %s\n",
+				strerror(errno));
+		}
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Sym); j++) {
+			Elf32_Sym *sym = &sec->symtab[j];
+			sym->st_name  = elf32_to_cpu(sym->st_name);
+			sym->st_value = elf32_to_cpu(sym->st_value);
+			sym->st_size  = elf32_to_cpu(sym->st_size);
+			sym->st_shndx = elf16_to_cpu(sym->st_shndx);
+		}
+	}
+}
+
+
+static void read_relocs(FILE *fp)
+{
+	int i,j;
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		if (sec->shdr.sh_type != SHT_REL) {
+			continue;
+		}
+		sec->reltab = malloc(sec->shdr.sh_size);
+		if (!sec->reltab) {
+			die("malloc of %d bytes for relocs failed\n",
+				sec->shdr.sh_size);
+		}
+		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
+			die("Seek to %d failed: %s\n",
+				sec->shdr.sh_offset, strerror(errno));
+		}
+		if (fread(sec->reltab, 1, sec->shdr.sh_size, fp)
+		    != sec->shdr.sh_size) {
+			die("Cannot read symbol table: %s\n",
+				strerror(errno));
+		}
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
+			Elf32_Rel *rel = &sec->reltab[j];
+			rel->r_offset = elf32_to_cpu(rel->r_offset);
+			rel->r_info   = elf32_to_cpu(rel->r_info);
+		}
+	}
+}
+
+
+static void print_absolute_symbols(void)
+{
+	int i;
+	printf("Absolute symbols\n");
+	printf(" Num:    Value Size  Type       Bind        Visibility  Name\n");
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		char *sym_strtab;
+		int j;
+
+		if (sec->shdr.sh_type != SHT_SYMTAB) {
+			continue;
+		}
+		sym_strtab = sec->link->strtab;
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Sym); j++) {
+			Elf32_Sym *sym;
+			const char *name;
+			sym = &sec->symtab[j];
+			name = sym_name(sym_strtab, sym);
+			if (sym->st_shndx != SHN_ABS) {
+				continue;
+			}
+			printf("%5d %08x %5d %10s %10s %12s %s\n",
+				j, sym->st_value, sym->st_size,
+				sym_type(ELF32_ST_TYPE(sym->st_info)),
+				sym_bind(ELF32_ST_BIND(sym->st_info)),
+				sym_visibility(ELF32_ST_VISIBILITY(sym->st_other)),
+				name);
+		}
+	}
+	printf("\n");
+}
+
+static void print_absolute_relocs(void)
+{
+	int i, printed = 0;
+
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		struct section *sec_applies, *sec_symtab;
+		char *sym_strtab;
+		Elf32_Sym *sh_symtab;
+		int j;
+		if (sec->shdr.sh_type != SHT_REL) {
+			continue;
+		}
+		sec_symtab  = sec->link;
+		sec_applies = &secs[sec->shdr.sh_info];
+		if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) {
+			continue;
+		}
+		sh_symtab  = sec_symtab->symtab;
+		sym_strtab = sec_symtab->link->strtab;
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
+			Elf32_Rel *rel;
+			Elf32_Sym *sym;
+			const char *name;
+			rel = &sec->reltab[j];
+			sym = &sh_symtab[ELF32_R_SYM(rel->r_info)];
+			name = sym_name(sym_strtab, sym);
+			if (sym->st_shndx != SHN_ABS) {
+				continue;
+			}
+
+			/* Absolute symbols are not relocated if bzImage is
+			 * loaded at a non-compiled address. Display a warning
+			 * to user at compile time about the absolute
+			 * relocations present.
+			 *
+			 * User need to audit the code to make sure
+			 * some symbols which should have been section
+			 * relative have not become absolute because of some
+			 * linker optimization or wrong programming usage.
+			 *
+			 * Before warning check if this absolute symbol
+			 * relocation is harmless.
+			 */
+			if (is_reloc(S_ABS, name) || is_reloc(S_REL, name))
+				continue;
+
+			if (!printed) {
+				printf("WARNING: Absolute relocations"
+					" present\n");
+				printf("Offset     Info     Type     Sym.Value "
+					"Sym.Name\n");
+				printed = 1;
+			}
+
+			printf("%08x %08x %10s %08x  %s\n",
+				rel->r_offset,
+				rel->r_info,
+				rel_type(ELF32_R_TYPE(rel->r_info)),
+				sym->st_value,
+				name);
+		}
+	}
+
+	if (printed)
+		printf("\n");
+}
+
+static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym),
+			int use_real_mode)
+{
+	int i;
+	/* Walk through the relocations */
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		char *sym_strtab;
+		Elf32_Sym *sh_symtab;
+		struct section *sec_applies, *sec_symtab;
+		int j;
+		struct section *sec = &secs[i];
+
+		if (sec->shdr.sh_type != SHT_REL) {
+			continue;
+		}
+		sec_symtab  = sec->link;
+		sec_applies = &secs[sec->shdr.sh_info];
+		if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) {
+			continue;
+		}
+		sh_symtab = sec_symtab->symtab;
+		sym_strtab = sec_symtab->link->strtab;
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
+			Elf32_Rel *rel;
+			Elf32_Sym *sym;
+			unsigned r_type;
+			const char *symname;
+			rel = &sec->reltab[j];
+			sym = &sh_symtab[ELF32_R_SYM(rel->r_info)];
+			r_type = ELF32_R_TYPE(rel->r_info);
+
+			switch (r_type) {
+			case R_386_NONE:
+			case R_386_PC32:
+			case R_386_PC16:
+			case R_386_PC8:
+				/*
+				 * NONE can be ignored and and PC relative
+				 * relocations don't need to be adjusted.
+				 */
+				break;
+
+			case R_386_16:
+				symname = sym_name(sym_strtab, sym);
+				if (!use_real_mode)
+					goto bad;
+				if (sym->st_shndx == SHN_ABS) {
+					if (is_reloc(S_ABS, symname))
+						break;
+					else if (!is_reloc(S_SEG, symname))
+						goto bad;
+				} else {
+					if (is_reloc(S_LIN, symname))
+						goto bad;
+					else
+						break;
+				}
+				visit(rel, sym);
+				break;
+
+			case R_386_32:
+				symname = sym_name(sym_strtab, sym);
+				if (sym->st_shndx == SHN_ABS) {
+					if (is_reloc(S_ABS, symname))
+						break;
+					else if (!is_reloc(S_REL, symname))
+						goto bad;
+				} else {
+					if (use_real_mode &&
+					    !is_reloc(S_LIN, symname))
+						break;
+				}
+				visit(rel, sym);
+				break;
+			default:
+				die("Unsupported relocation type: %s (%d)\n",
+				    rel_type(r_type), r_type);
+				break;
+			bad:
+				symname = sym_name(sym_strtab, sym);
+				die("Invalid %s relocation: %s\n",
+				    rel_type(r_type), symname);
+			}
+		}
+	}
+}
+
+static void count_reloc(Elf32_Rel *rel, Elf32_Sym *sym)
+{
+	if (ELF32_R_TYPE(rel->r_info) == R_386_16)
+		reloc16_count++;
+	else
+		reloc_count++;
+}
+
+static void collect_reloc(Elf32_Rel *rel, Elf32_Sym *sym)
+{
+	/* Remember the address that needs to be adjusted. */
+	if (ELF32_R_TYPE(rel->r_info) == R_386_16)
+		relocs16[reloc16_idx++] = rel->r_offset;
+	else
+		relocs[reloc_idx++] = rel->r_offset;
+}
+
+static int cmp_relocs(const void *va, const void *vb)
+{
+	const unsigned long *a, *b;
+	a = va; b = vb;
+	return (*a == *b)? 0 : (*a > *b)? 1 : -1;
+}
+
+static int write32(unsigned int v, FILE *f)
+{
+	unsigned char buf[4];
+
+	buf[0] = (v >>  0) & 0xff;
+	buf[1] = (v >>  8) & 0xff;
+	buf[2] = (v >> 16) & 0xff;
+	buf[3] = (v >> 24) & 0xff;
+	return fwrite(buf, 1, 4, f) == 4 ? 0 : -1;
+}
+
+static void emit_relocs(int as_text, int use_real_mode)
+{
+	int i;
+	/* Count how many relocations I have and allocate space for them. */
+	reloc_count = 0;
+	walk_relocs(count_reloc, use_real_mode);
+	relocs = malloc(reloc_count * sizeof(relocs[0]));
+	if (!relocs) {
+		die("malloc of %d entries for relocs failed\n",
+			reloc_count);
+	}
+
+	relocs16 = malloc(reloc16_count * sizeof(relocs[0]));
+	if (!relocs16) {
+		die("malloc of %d entries for relocs16 failed\n",
+			reloc16_count);
+	}
+	/* Collect up the relocations */
+	reloc_idx = 0;
+	walk_relocs(collect_reloc, use_real_mode);
+
+	if (reloc16_count && !use_real_mode)
+		die("Segment relocations found but --realmode not specified\n");
+
+	/* Order the relocations for more efficient processing */
+	qsort(relocs, reloc_count, sizeof(relocs[0]), cmp_relocs);
+	qsort(relocs16, reloc16_count, sizeof(relocs16[0]), cmp_relocs);
+
+	/* Print the relocations */
+	if (as_text) {
+		/* Print the relocations in a form suitable that
+		 * gas will like.
+		 */
+		printf(".section \".data.reloc\",\"a\"\n");
+		printf(".balign 4\n");
+		if (use_real_mode) {
+			printf("\t.long %lu\n", reloc16_count);
+			for (i = 0; i < reloc16_count; i++)
+				printf("\t.long 0x%08lx\n", relocs16[i]);
+			printf("\t.long %lu\n", reloc_count);
+			for (i = 0; i < reloc_count; i++) {
+				printf("\t.long 0x%08lx\n", relocs[i]);
+			}
+		} else {
+			/* Print a stop */
+			printf("\t.long 0x%08lx\n", (unsigned long)0);
+			for (i = 0; i < reloc_count; i++) {
+				printf("\t.long 0x%08lx\n", relocs[i]);
+			}
+		}
+
+		printf("\n");
+	}
+	else {
+		if (use_real_mode) {
+			write32(reloc16_count, stdout);
+			for (i = 0; i < reloc16_count; i++)
+				write32(relocs16[i], stdout);
+			write32(reloc_count, stdout);
+
+			/* Now print each relocation */
+			for (i = 0; i < reloc_count; i++)
+				write32(relocs[i], stdout);
+		} else {
+			/* Print a stop */
+			write32(0, stdout);
+
+			/* Now print each relocation */
+			for (i = 0; i < reloc_count; i++) {
+				write32(relocs[i], stdout);
+			}
+		}
+	}
+}
+
+static void usage(void)
+{
+	die("relocs [--abs-syms|--abs-relocs|--text|--realmode] vmlinux\n");
+}
+
+int main(int argc, char **argv)
+{
+	int show_absolute_syms, show_absolute_relocs;
+	int as_text, use_real_mode;
+	const char *fname;
+	FILE *fp;
+	int i;
+
+	show_absolute_syms = 0;
+	show_absolute_relocs = 0;
+	as_text = 0;
+	use_real_mode = 0;
+	fname = NULL;
+	for (i = 1; i < argc; i++) {
+		char *arg = argv[i];
+		if (*arg == '-') {
+			if (strcmp(arg, "--abs-syms") == 0) {
+				show_absolute_syms = 1;
+				continue;
+			}
+			if (strcmp(arg, "--abs-relocs") == 0) {
+				show_absolute_relocs = 1;
+				continue;
+			}
+			if (strcmp(arg, "--text") == 0) {
+				as_text = 1;
+				continue;
+			}
+			if (strcmp(arg, "--realmode") == 0) {
+				use_real_mode = 1;
+				continue;
+			}
+		}
+		else if (!fname) {
+			fname = arg;
+			continue;
+		}
+		usage();
+	}
+	if (!fname) {
+		usage();
+	}
+	regex_init(use_real_mode);
+	fp = fopen(fname, "r");
+	if (!fp) {
+		die("Cannot open %s: %s\n",
+			fname, strerror(errno));
+	}
+	read_ehdr(fp);
+	read_shdrs(fp);
+	read_strtabs(fp);
+	read_symtabs(fp);
+	read_relocs(fp);
+	if (show_absolute_syms) {
+		print_absolute_symbols();
+		return 0;
+	}
+	if (show_absolute_relocs) {
+		print_absolute_relocs();
+		return 0;
+	}
+	emit_relocs(as_text, use_real_mode);
+	return 0;
+}
diff --git a/scripts/Makefile b/scripts/Makefile
index df7678f..3626666 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -8,6 +8,8 @@
 # conmakehash:	 Create arrays for initializing the kernel console tables
 # docproc:       Used in Documentation/DocBook
 
+HOST_EXTRACFLAGS += -I$(srctree)/tools/include
+
 hostprogs-$(CONFIG_KALLSYMS)     += kallsyms
 hostprogs-$(CONFIG_LOGO)         += pnmtologo
 hostprogs-$(CONFIG_VT)           += conmakehash
-- 
1.7.10


[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [ 12/94] net/wireless: ipw2200: Fix WARN_ON occurring in wiphy_register called by ipw_pci_probe

[Herton Ronaldo Krzesinski]

On Sun, May 27, 2012 at 10:04:35AM +0900, Greg KH wrote:
> 3.3-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------

Same as what I commented on this being proposed for 3.4.y, this would
only be needed if "ipw2200: Fix order of device registration" was
applied to 3.3 kernels.

> 
> From: Stanislav Yakovlev <stas.yakovlev@gmail.com>
> 
> commit 7ed85b65ab611ba841d508ae4ff8c45fa0c48c80 upstream.
> 
> The problem was found by Stefan Lippers-Hollmann
> http://marc.info/?l=linux-wireless&m=132720334512946&w=2
> 
> WARNING: at /tmp/buildd/linux-aptosid-3.2/debian/build/source_i386_none/net/wireless/core.c:562 wiphy_register+0x45/0x38d [cfg80211]()
> Hardware name: TravelMate 290 \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff
> Modules linked in: ipw2200(+) iTCO_wdt libipw joydev drm snd_seq snd_timer snd_seq_device iTCO_vendor_support yenta_socket snd intel_agp i2c_i801 pcmcia_rsrc cfg80211 soundcore parport_pc psmouse parport rng_core snd_page_alloc serio_raw pcspkr i2c_algo_bit intel_gtt pcmcia_core evdev irda crc_ccitt rfkill lib80211 processor container ac battery shpchp pci_hotplug button ext4 mbcache jbd2 crc16 dm_mod sd_mod sr_mod crc_t10dif cdrom ata_generic pata_acpi ata_piix libata scsi_mod firewire_ohci firewire_core crc_itu_t 8139too 8139cp mii uhci_hcd ehci_hcd usbcore usb_common [last unloaded: scsi_wait_scan]
> Pid: 328, comm: modprobe Not tainted 3.2-1.slh.4-aptosid-686 #1
> Call Trace:
> [<c012eaf4>] ? warn_slowpath_common+0x7c/0x8f
> [<e0ff0b3e>] ? wiphy_register+0x45/0x38d [cfg80211]
> [<e0ff0b3e>] ? wiphy_register+0x45/0x38d [cfg80211]
> [<c012eb22>] ? warn_slowpath_null+0x1b/0x1f
> [<e0ff0b3e>] ? wiphy_register+0x45/0x38d [cfg80211]
> [<c01f89d7>] ? internal_create_group+0xf5/0xff
> [<e0a2de1c>] ? ipw_pci_probe+0xa9a/0xbd0 [ipw2200]
> [<c01519f4>] ? arch_local_irq_save+0xf/0x14
> [<c0252986>] ? pci_device_probe+0x53/0x9a
> [<c02c2820>] ? driver_probe_device+0x94/0x124
> [<c0252871>] ? pci_match_id+0x15/0x34
> [<c02c28f0>] ? __driver_attach+0x40/0x5b
> [<c02c1d81>] ? bus_for_each_dev+0x37/0x60
> [<c02c25aa>] ? driver_attach+0x17/0x1a
> [<c02c28b0>] ? driver_probe_device+0x124/0x124
> [<c02c22c4>] ? bus_add_driver+0x92/0x1d1
> [<e099d000>] ? 0xe099cfff
> [<c02c2cb8>] ? driver_register+0x7d/0xd4
> [<c017cd50>] ? jump_label_module_notify+0xec/0x167
> [<e099d000>] ? 0xe099cfff
> [<c0253017>] ? __pci_register_driver+0x32/0x87
> [<e099d000>] ? 0xe099cfff
> [<e099d02e>] ? ipw_init+0x2e/0x72 [ipw2200]
> [<c0101173>] ? do_one_initcall+0x7d/0x132
> [<c0145016>] ? __blocking_notifier_call_chain+0x47/0x4f
> [<c0154a73>] ? sys_init_module+0x13a4/0x159c
> [<c03a639f>] ? sysenter_do_call+0x12/0x28
> 
> This warning appears only if we apply Ben Hutchings' fix
> http://marc.info/?l=linux-wireless&m=132720195012653&w=2
> for the bug reported by Cesare Leonardi
> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=656813
> with cfg80211 warning during device registration
> ("cfg80211: failed to add phy80211 symlink to netdev!").
> 
> We separate device bring up and registration with network stack
> to avoid the problem.
> 
> After that Ben Hutchings' fix can be applied to fix the bug.
> 
> Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com>
> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
> Signed-off-by: John W. Linville <linville@tuxdriver.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> ---
>  drivers/net/wireless/ipw2x00/ipw2200.c |   21 ++++++---------------
>  1 file changed, 6 insertions(+), 15 deletions(-)
> 
> --- a/drivers/net/wireless/ipw2x00/ipw2200.c
> +++ b/drivers/net/wireless/ipw2x00/ipw2200.c
> @@ -11443,20 +11443,6 @@ static void ipw_bg_down(struct work_stru
>  	mutex_unlock(&priv->mutex);
>  }
>  
> -/* Called by register_netdev() */
> -static int ipw_net_init(struct net_device *dev)
> -{
> -	int rc = 0;
> -	struct ipw_priv *priv = libipw_priv(dev);
> -
> -	mutex_lock(&priv->mutex);
> -	if (ipw_up(priv))
> -		rc = -EIO;
> -	mutex_unlock(&priv->mutex);
> -
> -	return rc;
> -}
> -
>  static int ipw_wdev_init(struct net_device *dev)
>  {
>  	int i, rc = 0;
> @@ -11722,7 +11708,6 @@ static void ipw_prom_free(struct ipw_pri
>  #endif
>  
>  static const struct net_device_ops ipw_netdev_ops = {
> -	.ndo_init		= ipw_net_init,
>  	.ndo_open		= ipw_net_open,
>  	.ndo_stop		= ipw_net_stop,
>  	.ndo_set_rx_mode	= ipw_net_set_multicast_list,
> @@ -11849,6 +11834,12 @@ static int __devinit ipw_pci_probe(struc
>  		goto out_release_irq;
>  	}
>  
> +	if (ipw_up(priv)) {
> +		mutex_unlock(&priv->mutex);
> +		err = -EIO;
> +		goto out_remove_sysfs;
> +	}
> +
>  	mutex_unlock(&priv->mutex);
>  	err = register_netdev(net_dev);
>  	if (err) {
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe stable" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 
[]'s
Herton

Re: [ 76/94] x86, realmode: 16-bit real-mode code support for relocs tool

[Greg KH]

On Sun, May 27, 2012 at 05:37:32PM +0100, Ben Hutchings wrote:
> On Sun, 2012-05-27 at 10:05 +0900, Greg KH wrote:
> > 3.3-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: "H. Peter Anvin" <hpa@linux.intel.com>
> > 
> > commit 6520fe5564acf07ade7b18a1272db1184835c487 upstream.
> > 
> > A new option is added to the relocs tool called '--realmode'.
> > This option causes the generation of 16-bit segment relocations
> > and 32-bit linear relocations for the real-mode code. When
> > the real-mode code is moved to the low-memory during kernel
> > initialization, these relocation entries can be used to
> > relocate the code properly.
> > 
> > In the assembly code 16-bit segment relocations must be relative
> > to the 'real_mode_seg' absolute symbol. Linear relocations must be
> > relative to a symbol prefixed with 'pa_'.
> > 
> > 16-bit segment relocation is used to load cs:ip in 16-bit code.
> > Linear relocations are used in the 32-bit code for relocatable
> > data references. They are declared in the linker script of the
> > real-mode code.
> > 
> > The relocs tool is moved to arch/x86/tools/relocs.c, and added new
> > target archscripts that can be used to build scripts needed building
> > an architecture.  be compiled before building the arch/x86 tree.
> > 
> > [ hpa: accelerating this because it detects invalid absolute
> >   relocations, a serious bug in binutils 2.22.52.0.x which currently
> >   produces bad kernels. ]
> >
> > [ jsakkine: applied against 3.3.7 ]
> [...]
> 
> Are these relocs patches worth applying to 3.2.y as well?  This one
> needs backporting (see attached).  The following 5 can be cleanly
> cherry-picked after that.

I think so, as they have turned up problems in toolchains that people are
using to build the kernel incorrectly.  But it's your call to add them
or not because they are pretty big.

greg k-h

Re: [ 71/94] spi/spi-fsl-spi: reference correct pdata in fsl_spi_cs_control

[Herton Ronaldo Krzesinski]

On Sun, May 27, 2012 at 10:05:34AM +0900, Greg KH wrote:
> 3.3-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------

In addition to this fix, please also cherry-pick into 3.3 series commit
5039a86973cd35bdb2f64d28ee12f13fe2bb5a4c, "spi/mpc83xx: fix NULL pdata
dereference bug". I noted now that 3.3 stable is missing it. It
was the first part addressing the issue introduced by commit 178db7d3 in
spi-fsl-spi, that is included in 3.3.

> 
> From: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
> 
> commit 067aa4815a9bc12a569d8a06afef50ba5773afbf upstream.
> 
> Commit 178db7d3, "spi: Fix device unregistration when unregistering
> the bus master", changed spi device initialization of dev.parent pointer
> to be the master's device pointer instead of his parent.
> 
> This introduced a bug in spi-fsl-spi, since its usage of spi device
> pointer was not updated accordingly. This was later fixed by commit
> 5039a86, "spi/mpc83xx: fix NULL pdata dereference bug", but it missed
> another spot on fsl_spi_cs_control function where we also need to update
> usage of spi device pointer. This change address that.
> 
> Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
> Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> ---
>  drivers/spi/spi-fsl-spi.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> --- a/drivers/spi/spi-fsl-spi.c
> +++ b/drivers/spi/spi-fsl-spi.c
> @@ -931,7 +931,7 @@ err:
>  
>  static void fsl_spi_cs_control(struct spi_device *spi, bool on)
>  {
> -	struct device *dev = spi->dev.parent;
> +	struct device *dev = spi->dev.parent->parent;
>  	struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data);
>  	u16 cs = spi->chip_select;
>  	int gpio = pinfo->gpios[cs];
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe stable" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 
[]'s
Herton

Re: [ 89/94] rtlwifi: fix for race condition when firmware is cached

[Herton Ronaldo Krzesinski]

On Sun, May 27, 2012 at 10:05:52AM +0900, Greg KH wrote:
> 3.3-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Larry Finger <Larry.Finger@lwfinger.net>
> 
> commit 574e02abaf816b582685805f0c1150ca9f1f18ee upstream.
> 
> In commit b0302ab, the rtlwifi family of drivers was converted to use
> asynchronous firmware loading. Unfortumately, the implementation was
> racy, and the ieee80211 routines could be started before rtl_init_core()
> was called to setup the data.

Shouldn't also 3.3 have another fix after b0302ab was applied to it,
that is commit 0298dc9 ("rtlwifi: rtl8192de: Fix firmware initialization") ?
I noted it is missing, cherry-picks cleanly here on 3.3

> 
> This patch fixes the bug noted in https://bugzilla.kernel.org/show_bug.cgi?id=43187.
> 
> Reported-by: Joshua Roys <Joshua.Roys@gtri.gatech.edu>
> Tested-by: Neptune Ning <frostyplanet@gmail.com>
> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
> Signed-off-by: John W. Linville <linville@tuxdriver.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> ---
>  drivers/net/wireless/rtlwifi/pci.c |   17 +++++++++--------
>  drivers/net/wireless/rtlwifi/usb.c |   12 ++++++------
>  2 files changed, 15 insertions(+), 14 deletions(-)
> 
> --- a/drivers/net/wireless/rtlwifi/pci.c
> +++ b/drivers/net/wireless/rtlwifi/pci.c
> @@ -1865,14 +1865,6 @@ int __devinit rtl_pci_probe(struct pci_d
>  	/*like read eeprom and so on */
>  	rtlpriv->cfg->ops->read_eeprom_info(hw);
>  
> -	if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
> -		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
> -			 ("Can't init_sw_vars.\n"));
> -		goto fail3;
> -	}
> -
> -	rtlpriv->cfg->ops->init_sw_leds(hw);
> -
>  	/*aspm */
>  	rtl_pci_init_aspm(hw);
>  
> @@ -1892,6 +1884,15 @@ int __devinit rtl_pci_probe(struct pci_d
>  		goto fail3;
>  	}
>  
> +	if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
> +		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
> +			 ("Can't init_sw_vars.\n"));
> +		err = -ENODEV;
> +		goto fail3;
> +	}
> +
> +	rtlpriv->cfg->ops->init_sw_leds(hw);
> +
>  	err = sysfs_create_group(&pdev->dev.kobj, &rtl_attribute_group);
>  	if (err) {
>  		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
> --- a/drivers/net/wireless/rtlwifi/usb.c
> +++ b/drivers/net/wireless/rtlwifi/usb.c
> @@ -970,12 +970,6 @@ int __devinit rtl_usb_probe(struct usb_i
>  	rtlpriv->cfg->ops->read_chip_version(hw);
>  	/*like read eeprom and so on */
>  	rtlpriv->cfg->ops->read_eeprom_info(hw);
> -	if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
> -		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
> -			 ("Can't init_sw_vars.\n"));
> -		goto error_out;
> -	}
> -	rtlpriv->cfg->ops->init_sw_leds(hw);
>  	err = _rtl_usb_init(hw);
>  	err = _rtl_usb_init_sw(hw);
>  	/* Init mac80211 sw */
> @@ -985,6 +979,12 @@ int __devinit rtl_usb_probe(struct usb_i
>  			 ("Can't allocate sw for mac80211.\n"));
>  		goto error_out;
>  	}
> +	if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
> +		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
> +			 ("Can't init_sw_vars.\n"));
> +		goto error_out;
> +	}
> +	rtlpriv->cfg->ops->init_sw_leds(hw);
>  
>  	return 0;
>  error_out:
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe stable" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 
[]'s
Herton

Re: [ 89/94] rtlwifi: fix for race condition when firmware is cached

[Larry Finger]

On 05/28/2012 03:21 PM, Herton Ronaldo Krzesinski wrote:
> On Sun, May 27, 2012 at 10:05:52AM +0900, Greg KH wrote:
>> 3.3-stable review patch.  If anyone has any objections, please let me know.
>>
>> ------------------
>>
>> From: Larry Finger<Larry.Finger@lwfinger.net>
>>
>> commit 574e02abaf816b582685805f0c1150ca9f1f18ee upstream.
>>
>> In commit b0302ab, the rtlwifi family of drivers was converted to use
>> asynchronous firmware loading. Unfortumately, the implementation was
>> racy, and the ieee80211 routines could be started before rtl_init_core()
>> was called to setup the data.
>
> Shouldn't also 3.3 have another fix after b0302ab was applied to it,
> that is commit 0298dc9 ("rtlwifi: rtl8192de: Fix firmware initialization") ?
> I noted it is missing, cherry-picks cleanly here on 3.3

Yes, that patch could be applied to 3.3. I chose not to mark it as Cc Stable as 
that card is not widely available, thus I did not expect the problem to harm 
many users. On reflection, I think I made the wrong choice.

Greg, could you please apply mainline commit 0298dc9 to 3.3-stable?

Thanks,

Larry

Re: [ 12/94] net/wireless: ipw2200: Fix WARN_ON occurring in wiphy_register called by ipw_pci_probe

[Greg KH]

On Sun, May 27, 2012 at 04:47:44PM -0300, Herton Ronaldo Krzesinski wrote:
> On Sun, May 27, 2012 at 10:04:35AM +0900, Greg KH wrote:
> > 3.3-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> 
> Same as what I commented on this being proposed for 3.4.y, this would
> only be needed if "ipw2200: Fix order of device registration" was
> applied to 3.3 kernels.

Thanks, I've now removed this patch from both the 3.4 and 3.3 queues.

greg k-h

Re: [ 10/94] iwlwifi: use 6000G2B for 6030 device series

[Greg KH]

On Sun, May 27, 2012 at 02:38:44PM +0100, Ben Hutchings wrote:
> On Sun, 2012-05-27 at 10:04 +0900, Greg KH wrote:
> > 3.3-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
> > 
> > commit 35e7adaaf6932c5ffb22c6ec521734434c65adc5 upstream.
> > 
> > "iwlwifi: use correct released ucode version" change
> > the ucode api ok from 6000G2 to 6000G2B, but it shall belong
> > to 6030 device series, not the 6005 device series. Fix it
> [...]
> 
> Again, I believe this and 11/94 'iwlwifi: use correct released ucode
> version' are redundant.  Although in this series they cancel each other
> out...

You are right, thanks for the check, I've now deleted both of them from
the 3.3-stable tree.

greg k-h

Re: [ 71/94] spi/spi-fsl-spi: reference correct pdata in fsl_spi_cs_control

[Greg KH]

On Mon, May 28, 2012 at 04:44:38PM -0300, Herton Ronaldo Krzesinski wrote:
> On Sun, May 27, 2012 at 10:05:34AM +0900, Greg KH wrote:
> > 3.3-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> 
> In addition to this fix, please also cherry-pick into 3.3 series commit
> 5039a86973cd35bdb2f64d28ee12f13fe2bb5a4c, "spi/mpc83xx: fix NULL pdata
> dereference bug". I noted now that 3.3 stable is missing it. It
> was the first part addressing the issue introduced by commit 178db7d3 in
> spi-fsl-spi, that is included in 3.3.

Now applied, thanks.

greg k-h

Re: [ 89/94] rtlwifi: fix for race condition when firmware is cached

[Greg KH]

On Mon, May 28, 2012 at 04:59:12PM -0500, Larry Finger wrote:
> On 05/28/2012 03:21 PM, Herton Ronaldo Krzesinski wrote:
> >On Sun, May 27, 2012 at 10:05:52AM +0900, Greg KH wrote:
> >>3.3-stable review patch.  If anyone has any objections, please let me know.
> >>
> >>------------------
> >>
> >>From: Larry Finger<Larry.Finger@lwfinger.net>
> >>
> >>commit 574e02abaf816b582685805f0c1150ca9f1f18ee upstream.
> >>
> >>In commit b0302ab, the rtlwifi family of drivers was converted to use
> >>asynchronous firmware loading. Unfortumately, the implementation was
> >>racy, and the ieee80211 routines could be started before rtl_init_core()
> >>was called to setup the data.
> >
> >Shouldn't also 3.3 have another fix after b0302ab was applied to it,
> >that is commit 0298dc9 ("rtlwifi: rtl8192de: Fix firmware initialization") ?
> >I noted it is missing, cherry-picks cleanly here on 3.3
> 
> Yes, that patch could be applied to 3.3. I chose not to mark it as
> Cc Stable as that card is not widely available, thus I did not
> expect the problem to harm many users. On reflection, I think I made
> the wrong choice.
> 
> Greg, could you please apply mainline commit 0298dc9 to 3.3-stable?

Now applied, thanks.

greg k-h