* [PATCH v2 0/2] arm: imx/mxs: enable flexcan driver @ 2012-07-02 9:02 ` Marc Kleine-Budde 0 siblings, 0 replies; 12+ messages in thread From: Marc Kleine-Budde @ 2012-07-02 9:02 UTC (permalink / raw) To: linux-arm-kernel; +Cc: kernel, linux-can Hello, as the flexcan driver has DT binding for some time now. This patch makes the flexcan driver available in the can drivers menu if a SOC with flexcan is enabled. Changes since v2: - improve commit message as requested by Shawn regards, Marc ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 0/2] arm: imx/mxs: enable flexcan driver @ 2012-07-02 9:02 ` Marc Kleine-Budde 0 siblings, 0 replies; 12+ messages in thread From: Marc Kleine-Budde @ 2012-07-02 9:02 UTC (permalink / raw) To: linux-arm-kernel Hello, as the flexcan driver has DT binding for some time now. This patch makes the flexcan driver available in the can drivers menu if a SOC with flexcan is enabled. Changes since v2: - improve commit message as requested by Shawn regards, Marc ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 1/2] arm: imx: enable flexcan on imx25, imx35, imx53, imx6q 2012-07-02 9:02 ` Marc Kleine-Budde @ 2012-07-02 9:03 ` Marc Kleine-Budde -1 siblings, 0 replies; 12+ messages in thread From: Marc Kleine-Budde @ 2012-07-02 9:03 UTC (permalink / raw) To: linux-arm-kernel; +Cc: kernel, linux-can, Marc Kleine-Budde, Sascha Hauer Aas the flexcan driver has DT binding for some time now. This patch makes the flexcan driver available in the can drivers menu if a SOC with flexcan is enabled. Cc: Sascha Hauer <sha@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- arch/arm/mach-imx/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index eff4db5..c296851 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -52,6 +52,7 @@ config SOC_IMX25 select ARCH_MX25 select COMMON_CLK select CPU_ARM926T + select HAVE_CAN_FLEXCAN if CAN select ARCH_MXC_IOMUX_V3 select MXC_AVIC @@ -79,6 +80,7 @@ config SOC_IMX35 select HAVE_EPIT select MXC_AVIC select SMP_ON_UP if SMP + select HAVE_CAN_FLEXCAN if CAN config SOC_IMX5 select CPU_V7 @@ -105,6 +107,7 @@ config SOC_IMX53 select SOC_IMX5 select ARCH_MX5 select ARCH_MX53 + select HAVE_CAN_FLEXCAN if CAN if ARCH_IMX_V4_V5 @@ -826,6 +829,7 @@ config SOC_IMX6Q select COMMON_CLK select CPU_V7 select HAVE_ARM_SCU + select HAVE_CAN_FLEXCAN if CAN select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC -- 1.7.10 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v2 1/2] arm: imx: enable flexcan on imx25, imx35, imx53, imx6q @ 2012-07-02 9:03 ` Marc Kleine-Budde 0 siblings, 0 replies; 12+ messages in thread From: Marc Kleine-Budde @ 2012-07-02 9:03 UTC (permalink / raw) To: linux-arm-kernel Aas the flexcan driver has DT binding for some time now. This patch makes the flexcan driver available in the can drivers menu if a SOC with flexcan is enabled. Cc: Sascha Hauer <sha@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- arch/arm/mach-imx/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index eff4db5..c296851 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -52,6 +52,7 @@ config SOC_IMX25 select ARCH_MX25 select COMMON_CLK select CPU_ARM926T + select HAVE_CAN_FLEXCAN if CAN select ARCH_MXC_IOMUX_V3 select MXC_AVIC @@ -79,6 +80,7 @@ config SOC_IMX35 select HAVE_EPIT select MXC_AVIC select SMP_ON_UP if SMP + select HAVE_CAN_FLEXCAN if CAN config SOC_IMX5 select CPU_V7 @@ -105,6 +107,7 @@ config SOC_IMX53 select SOC_IMX5 select ARCH_MX5 select ARCH_MX53 + select HAVE_CAN_FLEXCAN if CAN if ARCH_IMX_V4_V5 @@ -826,6 +829,7 @@ config SOC_IMX6Q select COMMON_CLK select CPU_V7 select HAVE_ARM_SCU + select HAVE_CAN_FLEXCAN if CAN select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC -- 1.7.10 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v2 1/2] arm: imx: enable flexcan on imx25, imx35, imx53, imx6q 2012-07-02 9:03 ` Marc Kleine-Budde @ 2012-07-02 9:33 ` Sascha Hauer -1 siblings, 0 replies; 12+ messages in thread From: Sascha Hauer @ 2012-07-02 9:33 UTC (permalink / raw) To: Marc Kleine-Budde; +Cc: linux-arm-kernel, kernel, linux-can Shawn, In case you want to apply this one: Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha On Mon, Jul 02, 2012 at 11:03:00AM +0200, Marc Kleine-Budde wrote: > Aas the flexcan driver has DT binding for some time now. This patch makes > the flexcan driver available in the can drivers menu if a SOC with flexcan > is enabled. > > Cc: Sascha Hauer <sha@pengutronix.de> > Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> > --- > arch/arm/mach-imx/Kconfig | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index eff4db5..c296851 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -52,6 +52,7 @@ config SOC_IMX25 > select ARCH_MX25 > select COMMON_CLK > select CPU_ARM926T > + select HAVE_CAN_FLEXCAN if CAN > select ARCH_MXC_IOMUX_V3 > select MXC_AVIC > > @@ -79,6 +80,7 @@ config SOC_IMX35 > select HAVE_EPIT > select MXC_AVIC > select SMP_ON_UP if SMP > + select HAVE_CAN_FLEXCAN if CAN > > config SOC_IMX5 > select CPU_V7 > @@ -105,6 +107,7 @@ config SOC_IMX53 > select SOC_IMX5 > select ARCH_MX5 > select ARCH_MX53 > + select HAVE_CAN_FLEXCAN if CAN > > if ARCH_IMX_V4_V5 > > @@ -826,6 +829,7 @@ config SOC_IMX6Q > select COMMON_CLK > select CPU_V7 > select HAVE_ARM_SCU > + select HAVE_CAN_FLEXCAN if CAN > select HAVE_IMX_GPC > select HAVE_IMX_MMDC > select HAVE_IMX_SRC > -- > 1.7.10 > > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 1/2] arm: imx: enable flexcan on imx25, imx35, imx53, imx6q @ 2012-07-02 9:33 ` Sascha Hauer 0 siblings, 0 replies; 12+ messages in thread From: Sascha Hauer @ 2012-07-02 9:33 UTC (permalink / raw) To: linux-arm-kernel Shawn, In case you want to apply this one: Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha On Mon, Jul 02, 2012 at 11:03:00AM +0200, Marc Kleine-Budde wrote: > Aas the flexcan driver has DT binding for some time now. This patch makes > the flexcan driver available in the can drivers menu if a SOC with flexcan > is enabled. > > Cc: Sascha Hauer <sha@pengutronix.de> > Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> > --- > arch/arm/mach-imx/Kconfig | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index eff4db5..c296851 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -52,6 +52,7 @@ config SOC_IMX25 > select ARCH_MX25 > select COMMON_CLK > select CPU_ARM926T > + select HAVE_CAN_FLEXCAN if CAN > select ARCH_MXC_IOMUX_V3 > select MXC_AVIC > > @@ -79,6 +80,7 @@ config SOC_IMX35 > select HAVE_EPIT > select MXC_AVIC > select SMP_ON_UP if SMP > + select HAVE_CAN_FLEXCAN if CAN > > config SOC_IMX5 > select CPU_V7 > @@ -105,6 +107,7 @@ config SOC_IMX53 > select SOC_IMX5 > select ARCH_MX5 > select ARCH_MX53 > + select HAVE_CAN_FLEXCAN if CAN > > if ARCH_IMX_V4_V5 > > @@ -826,6 +829,7 @@ config SOC_IMX6Q > select COMMON_CLK > select CPU_V7 > select HAVE_ARM_SCU > + select HAVE_CAN_FLEXCAN if CAN > select HAVE_IMX_GPC > select HAVE_IMX_MMDC > select HAVE_IMX_SRC > -- > 1.7.10 > > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 1/2] arm: imx: enable flexcan on imx25, imx35, imx53, imx6q 2012-07-02 9:03 ` Marc Kleine-Budde @ 2012-07-03 2:36 ` Shawn Guo -1 siblings, 0 replies; 12+ messages in thread From: Shawn Guo @ 2012-07-03 2:36 UTC (permalink / raw) To: Marc Kleine-Budde; +Cc: linux-arm-kernel, Sascha Hauer, kernel, linux-can On Mon, Jul 02, 2012 at 11:03:00AM +0200, Marc Kleine-Budde wrote: > Aas the flexcan driver has DT binding for some time now. This patch makes > the flexcan driver available in the can drivers menu if a SOC with flexcan > is enabled. > > Cc: Sascha Hauer <sha@pengutronix.de> > Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Applied with subject prefix changed to "ARM: imx: ..." Regards, Shawn ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 1/2] arm: imx: enable flexcan on imx25, imx35, imx53, imx6q @ 2012-07-03 2:36 ` Shawn Guo 0 siblings, 0 replies; 12+ messages in thread From: Shawn Guo @ 2012-07-03 2:36 UTC (permalink / raw) To: linux-arm-kernel On Mon, Jul 02, 2012 at 11:03:00AM +0200, Marc Kleine-Budde wrote: > Aas the flexcan driver has DT binding for some time now. This patch makes > the flexcan driver available in the can drivers menu if a SOC with flexcan > is enabled. > > Cc: Sascha Hauer <sha@pengutronix.de> > Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Applied with subject prefix changed to "ARM: imx: ..." Regards, Shawn ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 2/2] arm: mxs: enable flexcan on imx28 2012-07-02 9:02 ` Marc Kleine-Budde @ 2012-07-02 9:03 ` Marc Kleine-Budde -1 siblings, 0 replies; 12+ messages in thread From: Marc Kleine-Budde @ 2012-07-02 9:03 UTC (permalink / raw) To: linux-arm-kernel; +Cc: kernel, linux-can, Marc Kleine-Budde, Shawn Guo As the flexcan driver has DT binding for some time now. This patch makes the flexcan driver available in the can drivers menu if a SOC with flexcan is enabled. Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- arch/arm/mach-mxs/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 91cf062..ccdf83b 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -16,6 +16,7 @@ config SOC_IMX28 bool select ARM_AMBA select CPU_ARM926T + select HAVE_CAN_FLEXCAN if CAN select HAVE_PWM select PINCTRL_IMX28 -- 1.7.10 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v2 2/2] arm: mxs: enable flexcan on imx28 @ 2012-07-02 9:03 ` Marc Kleine-Budde 0 siblings, 0 replies; 12+ messages in thread From: Marc Kleine-Budde @ 2012-07-02 9:03 UTC (permalink / raw) To: linux-arm-kernel As the flexcan driver has DT binding for some time now. This patch makes the flexcan driver available in the can drivers menu if a SOC with flexcan is enabled. Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- arch/arm/mach-mxs/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 91cf062..ccdf83b 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -16,6 +16,7 @@ config SOC_IMX28 bool select ARM_AMBA select CPU_ARM926T + select HAVE_CAN_FLEXCAN if CAN select HAVE_PWM select PINCTRL_IMX28 -- 1.7.10 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v2 2/2] arm: mxs: enable flexcan on imx28 2012-07-02 9:03 ` Marc Kleine-Budde @ 2012-07-03 2:41 ` Shawn Guo -1 siblings, 0 replies; 12+ messages in thread From: Shawn Guo @ 2012-07-03 2:41 UTC (permalink / raw) To: Marc Kleine-Budde; +Cc: linux-arm-kernel, kernel, linux-can On Mon, Jul 02, 2012 at 11:03:01AM +0200, Marc Kleine-Budde wrote: > As the flexcan driver has DT binding for some time now. This patch makes > the flexcan driver available in the can drivers menu if a SOC with flexcan > is enabled. > > Cc: Shawn Guo <shawn.guo@linaro.org> > Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Applied with subject prefix changed to "ARM: mxs: ..." -- Regards, Shawn ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 2/2] arm: mxs: enable flexcan on imx28 @ 2012-07-03 2:41 ` Shawn Guo 0 siblings, 0 replies; 12+ messages in thread From: Shawn Guo @ 2012-07-03 2:41 UTC (permalink / raw) To: linux-arm-kernel On Mon, Jul 02, 2012 at 11:03:01AM +0200, Marc Kleine-Budde wrote: > As the flexcan driver has DT binding for some time now. This patch makes > the flexcan driver available in the can drivers menu if a SOC with flexcan > is enabled. > > Cc: Shawn Guo <shawn.guo@linaro.org> > Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Applied with subject prefix changed to "ARM: mxs: ..." -- Regards, Shawn ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2012-07-03 2:41 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2012-07-02 9:02 [PATCH v2 0/2] arm: imx/mxs: enable flexcan driver Marc Kleine-Budde 2012-07-02 9:02 ` Marc Kleine-Budde 2012-07-02 9:03 ` [PATCH v2 1/2] arm: imx: enable flexcan on imx25, imx35, imx53, imx6q Marc Kleine-Budde 2012-07-02 9:03 ` Marc Kleine-Budde 2012-07-02 9:33 ` Sascha Hauer 2012-07-02 9:33 ` Sascha Hauer 2012-07-03 2:36 ` Shawn Guo 2012-07-03 2:36 ` Shawn Guo 2012-07-02 9:03 ` [PATCH v2 2/2] arm: mxs: enable flexcan on imx28 Marc Kleine-Budde 2012-07-02 9:03 ` Marc Kleine-Budde 2012-07-03 2:41 ` Shawn Guo 2012-07-03 2:41 ` Shawn Guo
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.