* Bug#679750: Lenovo G360: ALPS Touchpad Recognized as "PS/2 Generic Mouse"(with newly dmesg information)
@ 2012-07-06 3:39 littlebat
2012-07-06 5:11 ` Seth Forshee
0 siblings, 1 reply; 9+ messages in thread
From: littlebat @ 2012-07-06 3:39 UTC (permalink / raw)
To: seth.forshee, linux-input; +Cc: 679750, jrnieder, rik.theys
[-- Attachment #1: Type: text/plain, Size: 4540 bytes --]
Hi,
Because linux-input@vger.kernel.org is a mail list, I must register to
it for sending bug report. So all the posts about this bug sent to it
before had never reach it. I re-organize the text and report this bug to
linux-input@vger.kernel.org again when post my newly demsg information
under a recompiled 3.4 kernel with added "#DEFINE DEBUG" to the top of
"drivers/input/mouse/alps.c" adviced by seth.forshee@canonical.com.
I think I am reporting a kernel bug about ALPS touchpad on Lenovo
G360.
This bug was reported at
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679750 first.
My lenovo G360 has an ALPS touchpad, shows in Windows 7 Home Editition
OEM in this laptop. Under Debian Squeeze and Ubuntu 12.04 LTS LiveCD in
same laptop, the left and right key, single and double tap, tracking of
touchpad works well. But, there isn't touchpad tab in gnome mouse
setting dialog, so I can't setup edge scrolling and disable touchpad on
typing. xinput shows it is a "PS/2 Generic Mouse".
I have tried kernels 2.6.32-45, 3.2.4-1~bpo60+1,
3.4.4-1~experimental.1 under Debian Squeeze and kernel 3.2 under
Ubuntu 12.04 LTS LiveCD on this Lenovo G360 laptop. None of these four
kernels can configure a full functional ALPS touchpad. There are
same syptoms under all of these four kernels:
1, "synclient -l" shows "Couldn't find synaptics properties. No
synaptics driver loaded? "
2, "xinput --list" shows it is a "PS/2 Generic Mouse"
3, "cat /proc/bus/input/devices" shows it is "N: Name="PS/2 Generic
Mouse""
4, Can't find any string like "touchpad", "synaptics" in
"/var/log/Xorg.0.log"
5, There isn't touchpad tab in gnome mouse setting dialog, so I can't
setup edge scrolling and disable touchpad on typing.
Under the kernel 3.2.4-1~bpo60+1 on Debian Squeeze, I have tried many
ways to fix this problem, but no lucky. The ways I tried such as:
1, add "psmouse.proto=imps(or exps)" into kernel parameters;
2, add file "etc/X11/xorg.d/10-synaptics.conf", the content as below:
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "SHMConfig" "on"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "VertTwoFingerScroll" "on"
Option "HorizTwoFingerScroll" "on"
EndSection
3, Thanks to the help of "How to disable Alps touchpad while typing or
when using an external mouse in Linux" at:
http://www.imega.cz/Linux-Alps-Touchpad-Dell-E6410/Linux-Alps-touchpad-disable.php
I resolved the problem of "disable touchpad on typing" by using a
python script, but I can't make edge scrolling work yet.
According to the advice of the page above, I downloaded
linux-source-3.2, and applied patch at
"https://patchwork.kernel.org/patch/118834/ ": patch name:
Resend-Add-support-for-Intellimouse-Mode-in-ALPS-touchpad-on-Dell-E2-series-Laptops.patch,
see attachment), I have not used cat *.patch | patch -p1, just copy the
modified code into linux-source-3.2 and recompile psmouse.ko. But no
lucky, edge scrolling still can't work.
4, etc..
There are six attachments in this report.
Note: All of them got under running recompiled linux_3.4.4.orig.tar.xz
source on Debian Squeeze, compiled kernel linux_3.4.4.orig.tar.xz
source without pacthing debian pacthes under kernel 3.2.4-1~bpo60+1,I
don't know how to patch them. I added "#define DEBUG" to the top of
"drivers/input/mouse/alps.c" of source of kernel
linux_3.4.4.orig.tar.xz. according to the advice at
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679750#78
The kernel downloaded from:
http://snapshot.debian.org/archive/debian/20120626T221453Z/pool/main/l/linux/linux_3.4.4.orig.tar.xz
1, output of command "xinput list--long": xinputlist.txt
2, output of command "cat /proc/bus/input/devices": inputdevices.txt
3, /var/log/Xorg.0.log: Xorg.0.log
4, output of command "dmesg": dmesg.txt
5, output of command "for file in /sys/class/dmi/id/*; do if [ -f
"$file" -a -r "$file" ]; then echo $file: `cat $file` ; fi; done":
DMI.txt
6, kernel config file, borrowed from
linux-image-3.4-trunk-amd64_3.4.4-1~experimental.1_amd64.deb:
config-3.4.4debugpsmouse
I found these lines in my dmesg information:
[ 19.995850] psmouse serio4: alps: E6 report: 00 00 64
[ 20.021288] psmouse serio4: alps: E7 report: 73 03 50
[ 20.623609] input: PS/2 Generic Mouse
as /devices/platform/i8042/serio4/input/input9
Tell me If need more detail information.
Thanks.
[-- Attachment #2: config-3.4.4debugpsmouse --]
[-- Type: application/octet-stream, Size: 131408 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.4.4 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="debugpsmouse"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_THROTTLING is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=500
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=512
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_I8K=m
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
# CONFIG_CLEANCACHE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_HOTPLUG_MEMORY=m
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_SFI=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=m
CONFIG_XEN_PCIDEV_FRONTEND=m
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCI_IOAPIC is not set
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_INET_UDP_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
CONFIG_LAPB=m
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
CONFIG_PHONET=m
CONFIG_IEEE802154=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y
CONFIG_HAVE_BPF_JIT=y
CONFIG_BPF_JIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_MCP251X=m
CONFIG_PCH_CAN=m
CONFIG_CAN_SJA1000=m
CONFIG_CAN_SJA1000_ISA=m
# CONFIG_CAN_SJA1000_PLATFORM is not set
CONFIG_CAN_EMS_PCMCIA=m
CONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_PEAK_PCMCIA is not set
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PLX_PCI=m
# CONFIG_CAN_C_CAN is not set
# CONFIG_CAN_CC770 is not set
#
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB2=m
# CONFIG_CAN_PEAK_USB is not set
CONFIG_CAN_SOFTING=m
CONFIG_CAN_SOFTING_CS=m
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_REGULATOR is not set
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
CONFIG_NFC_NCI=m
# CONFIG_NFC_LLCP is not set
#
# Near Field Communication (NFC) devices
#
# CONFIG_PN544_NFC is not set
CONFIG_NFC_PN533=m
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_CONNECTOR=m
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=m
CONFIG_MTD_SWAP=m
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
CONFIG_MTD_NETtel=m
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
CONFIG_MTD_PCMCIA=m
# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
# CONFIG_MTD_GPIO_ADDR is not set
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m
# CONFIG_MTD_LATCH_ADDR is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
# CONFIG_MTD_DATAFLASH_OTP is not set
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_SST25L=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0x0
CONFIG_MTD_NAND_ECC=m
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_BCH is not set
CONFIG_MTD_SM_COMMON=m
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_DENALI is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_RICOH=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
# CONFIG_MTD_NAND_DOCG4 is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=m
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m
#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not set
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_NVME is not set
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_XEN_BLKDEV_BACKEND=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_RBD=m
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_AD525X_DPOT_SPI=m
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
# CONFIG_INTEL_MID_PTI is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1780=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_TI_DAC7512=m
CONFIG_VMWARE_BALLOON=m
CONFIG_BMP085=m
CONFIG_PCH_PHUB=m
# CONFIG_USB_SWITCH_FSA9480 is not set
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_IWMC3200TOP=m
# CONFIG_IWMC3200TOP_DEBUG is not set
# CONFIG_IWMC3200TOP_DEBUGFS is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_MVSAS_TASKLET is not set
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_VMWARE_PVSCSI=m
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_ISCI=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_SRP=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARASAN_CF=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_RZ1000=m
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
# CONFIG_DM_DEBUG_SPACE_MAPS is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_RAID=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
CONFIG_MII=m
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_SUNGEM_PHY=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ATM_SOLOS=m
#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_PCNET32=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_BNX2X=m
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4VF=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
# CONFIG_DE4X5 is not set
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_DL2K=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_NET_VENDOR_EXAR=y
CONFIG_S2IO=m
CONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_NET_VENDOR_HP=y
CONFIG_HP100=m
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_DCA=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_ZNET is not set
CONFIG_IP1000=m
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
CONFIG_KS8851=m
CONFIG_KS8851_MLL=m
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
CONFIG_FEALNX=m
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=m
CONFIG_NE2K_PCI=m
CONFIG_PCMCIA_PCNET=m
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
CONFIG_PCH_GBE=m
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_ATP=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_SEEQ=y
# CONFIG_SEEQ8005 is not set
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_PCMCIA_SMC91C92=m
CONFIG_EPIC100=m
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NIU=m
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_NET_VENDOR_TI=y
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_FDDI=y
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_NET_SB1000=m
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_TR=y
CONFIG_WANT_LLC=y
CONFIG_PCMCIA_IBMTR=m
CONFIG_IBMOL=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
# CONFIG_USB_NET_QMI_WWAN is not set
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
CONFIG_MWL8K=m
CONFIG_ATH_COMMON=m
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH5K_TRACER is not set
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
# CONFIG_ATH9K_AHB is not set
# CONFIG_ATH9K_DEBUGFS is not set
CONFIG_ATH9K_RATE_CONTROL=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not set
CONFIG_ATH6KL=m
# CONFIG_ATH6KL_SDIO is not set
# CONFIG_ATH6KL_USB is not set
# CONFIG_ATH6KL_DEBUG is not set
CONFIG_B43=m
CONFIG_B43_BCMA=y
# CONFIG_B43_BCMA_EXTRA is not set
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
# CONFIG_BRCMFMAC is not set
# CONFIG_BRCMDBG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
# CONFIG_IPW2100 is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLWIFI=m
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
# CONFIG_IWLWIFI_P2P is not set
# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
# CONFIG_IWLEGACY_DEBUG is not set
CONFIG_IWM=m
# CONFIG_IWM_DEBUG is not set
# CONFIG_IWM_TRACING is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_SPI=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_HERMES=m
# CONFIG_HERMES_PRISM is not set
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ORINOCO_USB=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_SPI=m
# CONFIG_P54_SPI_DEFAULT_EEPROM is not set
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT53XX=y
# CONFIG_RT2800USB_UNKNOWN is not set
CONFIG_RT2800_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=m
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
CONFIG_WL1251_SDIO=m
CONFIG_WL12XX_MENU=m
CONFIG_WL12XX=m
CONFIG_WL12XX_SPI=m
CONFIG_WL12XX_SDIO=m
CONFIG_WL12XX_PLATFORM_DATA=y
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_SDIO=m
CONFIG_WIMAX_IWMC3200_SDIO=y
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
CONFIG_WAN=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
# CONFIG_HDLC_X25 is not set
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300TOO is not set
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
# CONFIG_CYCLOMX_X25 is not set
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_XEN_NETDEV_BACKEND=m
CONFIG_VMXNET3=m
CONFIG_HYPERV_NET=m
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
# CONFIG_MISDN_NETJET is not set
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=m
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
CONFIG_KEYBOARD_QT2160=m
CONFIG_KEYBOARD_LKKBD=m
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_MAX7359=m
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_OPENCORES=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_XTKBD=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
# CONFIG_TOUCHSCREEN_EGALAX is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
# CONFIG_TOUCHSCREEN_ILI210X is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_PIXCIR is not set
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_ST1232 is not set
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
CONFIG_INPUT_APANEL=m
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PCF50633_PMU=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
CONFIG_ISI=m
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
CONFIG_STALDRV=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=m
# CONFIG_SERIAL_MAX3107 is not set
CONFIG_SERIAL_MFD_HSU=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_PCH_UART=m
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_RAMOOPS=m
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_EG20T=m
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_INTEL_MID is not set
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=m
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_TOPCLIFF_PCH=m
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
CONFIG_SPI_TLE62X0=m
# CONFIG_HSI is not set
#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_VX855 is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_LANGWELL is not set
CONFIG_GPIO_PCH=m
CONFIG_GPIO_ML_IOH=m
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=m
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_DS2781 is not set
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=m
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_DS2760=m
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
CONFIG_BATTERY_DS2782=m
CONFIG_BATTERY_SBS=m
CONFIG_BATTERY_BQ27x00=m
CONFIG_BATTERY_BQ27X00_I2C=y
CONFIG_BATTERY_BQ27X00_PLATFORM=y
CONFIG_BATTERY_MAX17040=m
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_CHARGER_PCF50633=m
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_SMB347 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
# CONFIG_SENSORS_SCH5636 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_APPLESMC=m
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SC520_WDT=m
CONFIG_SBC_FITPC2_WATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_NV_TCO=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMSC37B787_WDT=m
# CONFIG_VIA_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83697UG_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
CONFIG_XEN_WDT=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
CONFIG_MFD_SM501=m
# CONFIG_MFD_SM501_GPIO is not set
CONFIG_HTC_PASIC3=m
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=m
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_DA9052_SPI is not set
CONFIG_MFD_WM8400=m
# CONFIG_MFD_WM831X_SPI is not set
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
# CONFIG_MFD_MC13XXX is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_LPC_SCH=m
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
CONFIG_MFD_WL1273_CORE=m
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_LP3971=m
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_PCF50633=m
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_WM8400=m
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
# CONFIG_VIDEO_V4L2_SUBDEV_API is not set
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_RC_CORE=m
CONFIG_LIRC=m
CONFIG_RC_MAP=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_RC5_SZ_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
CONFIG_RC_LOOPBACK=m
# CONFIG_IR_GPIO_CIR is not set
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
#
# Video decoders
#
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
#
# Camera sensor devices
#
CONFIG_VIDEO_MT9V011=m
#
# Flash devices
#
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
#
# Miscelaneous helper chips
#
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_VIVI=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
# CONFIG_USB_GSPCA_JL2005BCD is not set
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=y
CONFIG_VIDEO_TLG2300=m
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_USB_ET61X251=m
CONFIG_USB_SN9C102=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_V4L_PCI_DRIVERS=y
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
# CONFIG_MEDIA_ALTERA_CI is not set
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
# CONFIG_V4L_ISA_PARPORT_DRIVERS is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_USB_MR800=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_I2C_SI4713=m
CONFIG_RADIO_SI4713=m
# CONFIG_USB_KEENE is not set
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_WL1273=m
#
# Texas Instruments WL128x FM driver (ST based)
#
# CONFIG_RADIO_WL128X is not set
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_EC168=m
# CONFIG_DVB_USB_AZ6007 is not set
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_IT913X=m
CONFIG_DVB_USB_MXL111SF=m
# CONFIG_DVB_USB_RTL28XXU is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_SIANO_MDTV=m
#
# Siano module components
#
CONFIG_SMS_USB_DRV=m
CONFIG_SMS_SDIO_DRV=m
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported SDMC DM1105 Adapters
#
CONFIG_DVB_DM1105=m
#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
#
# Supported Earthsoft PT1 Adapters
#
CONFIG_DVB_PT1=m
#
# Supported Mantis Adapters
#
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
#
# Supported nGene Adapters
#
CONFIG_DVB_NGENE=m
#
# Supported ddbridge ('Octopus') Adapters
#
CONFIG_DVB_DDBRIDGE=m
#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_IT913X_FE=m
CONFIG_DVB_M88RS2000=m
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_KMS=y
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_NOUVEAU_DEBUG is not set
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I810 is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_DRM_VMWGFX=m
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_STUB_POULSBO is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_CYBER2000_DDC=y
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_I740 is not set
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=m
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=m
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
CONFIG_FB_VIA_X_COMPATIBILITY=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
CONFIG_FB_SM501=m
# CONFIG_FB_SMSCUFX is not set
CONFIG_FB_UDL=m
CONFIG_FB_VIRTUAL=m
CONFIG_XEN_FBDEV_FRONTEND=y
CONFIG_FB_METRONOME=m
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
# CONFIG_FB_BROADSHEET is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_LP855X is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_TEA575X=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_FIREWIRE_SPEAKERS=m
CONFIG_SND_ISIGHT=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
CONFIG_HID_KEYTOUCH=m
# CONFIG_HID_KYE is not set
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
# CONFIG_HID_HYPERV_MOUSE is not set
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=m
CONFIG_HID_WACOM_POWER_SUPPLY=y
CONFIG_HID_WIIMOTE=m
CONFIG_HID_WIIMOTE_EXT=y
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_DWC3 is not set
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_RENESAS_USBHS is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
CONFIG_USB_SERIAL_ZIO=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_CI13XXX_PCI is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
CONFIG_USB_EG20T=m
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_NOP_USB_XCEIV=m
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_PCA9532_GPIO is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA9633 is not set
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_DELL_NETBOOKS=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=m
CONFIG_INFINIBAND_QIB=m
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_INFINIBAND_CXGB4=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
# CONFIG_EDAC_MCE_INJ is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
# CONFIG_EDAC_SBRIDGE is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_DS3232 is not set
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
# CONFIG_RTC_DRV_ISL12022 is not set
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_DS3234=m
CONFIG_RTC_DRV_PCF2123=m
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_PCF50633=m
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
CONFIG_INTEL_IOATDMA=m
# CONFIG_TIMB_DMA is not set
CONFIG_PCH_DMA=m
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_UTILS=m
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=m
CONFIG_XEN_GRANT_DEV_ALLOC=m
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_PCIDEV_BACKEND=m
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=m
CONFIG_STAGING=y
CONFIG_ET131X=m
# CONFIG_SLICOSS is not set
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_HOST=m
# CONFIG_USBIP_DEBUG is not set
# CONFIG_W35UND is not set
CONFIG_PRISM2_USB=m
# CONFIG_ECHO is not set
CONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_MISC_DRIVERS=m
CONFIG_COMEDI_KCOMEDILIB=m
CONFIG_COMEDI_BOND=m
CONFIG_COMEDI_TEST=m
CONFIG_COMEDI_PARPORT=m
CONFIG_COMEDI_SERIAL2002=m
# CONFIG_COMEDI_SKEL is not set
CONFIG_COMEDI_PCI_DRIVERS=m
CONFIG_COMEDI_ADDI_APCI_035=m
CONFIG_COMEDI_ADDI_APCI_1032=m
CONFIG_COMEDI_ADDI_APCI_1500=m
CONFIG_COMEDI_ADDI_APCI_1516=m
CONFIG_COMEDI_ADDI_APCI_1564=m
CONFIG_COMEDI_ADDI_APCI_16XX=m
CONFIG_COMEDI_ADDI_APCI_2016=m
CONFIG_COMEDI_ADDI_APCI_2032=m
CONFIG_COMEDI_ADDI_APCI_2200=m
CONFIG_COMEDI_ADDI_APCI_3001=m
CONFIG_COMEDI_ADDI_APCI_3120=m
CONFIG_COMEDI_ADDI_APCI_3501=m
CONFIG_COMEDI_ADDI_APCI_3XXX=m
CONFIG_COMEDI_ADL_PCI6208=m
# CONFIG_COMEDI_ADL_PCI7230 is not set
CONFIG_COMEDI_ADL_PCI7296=m
CONFIG_COMEDI_ADL_PCI7432=m
CONFIG_COMEDI_ADL_PCI8164=m
CONFIG_COMEDI_ADL_PCI9111=m
CONFIG_COMEDI_ADL_PCI9118=m
CONFIG_COMEDI_ADV_PCI1710=m
CONFIG_COMEDI_ADV_PCI1723=m
CONFIG_COMEDI_ADV_PCI_DIO=m
CONFIG_COMEDI_AMPLC_DIO200=m
CONFIG_COMEDI_AMPLC_PC236=m
CONFIG_COMEDI_AMPLC_PC263=m
CONFIG_COMEDI_AMPLC_PCI224=m
CONFIG_COMEDI_AMPLC_PCI230=m
CONFIG_COMEDI_CONTEC_PCI_DIO=m
CONFIG_COMEDI_DT3000=m
# CONFIG_COMEDI_DYNA_PCI10XX is not set
CONFIG_COMEDI_UNIOXX5=m
CONFIG_COMEDI_GSC_HPDI=m
CONFIG_COMEDI_ICP_MULTI=m
CONFIG_COMEDI_II_PCI20KC=m
CONFIG_COMEDI_DAQBOARD2000=m
CONFIG_COMEDI_JR3_PCI=m
CONFIG_COMEDI_KE_COUNTER=m
CONFIG_COMEDI_CB_PCIDAS64=m
CONFIG_COMEDI_CB_PCIDAS=m
CONFIG_COMEDI_CB_PCIDDA=m
CONFIG_COMEDI_CB_PCIDIO=m
CONFIG_COMEDI_CB_PCIMDAS=m
CONFIG_COMEDI_CB_PCIMDDA=m
CONFIG_COMEDI_ME4000=m
CONFIG_COMEDI_ME_DAQ=m
CONFIG_COMEDI_NI_6527=m
CONFIG_COMEDI_NI_65XX=m
CONFIG_COMEDI_NI_660X=m
CONFIG_COMEDI_NI_670X=m
CONFIG_COMEDI_NI_PCIDIO=m
CONFIG_COMEDI_NI_PCIMIO=m
CONFIG_COMEDI_RTD520=m
CONFIG_COMEDI_S526=m
CONFIG_COMEDI_S626=m
CONFIG_COMEDI_SSV_DNP=m
CONFIG_COMEDI_PCMCIA_DRIVERS=m
CONFIG_COMEDI_CB_DAS16_CS=m
CONFIG_COMEDI_DAS08_CS=m
CONFIG_COMEDI_NI_DAQ_700_CS=m
CONFIG_COMEDI_NI_DAQ_DIO24_CS=m
CONFIG_COMEDI_NI_LABPC_CS=m
CONFIG_COMEDI_NI_MIO_CS=m
CONFIG_COMEDI_QUATECH_DAQP_CS=m
CONFIG_COMEDI_USB_DRIVERS=m
CONFIG_COMEDI_DT9812=m
CONFIG_COMEDI_USBDUX=m
CONFIG_COMEDI_USBDUXFAST=m
# CONFIG_COMEDI_USBDUXSIGMA is not set
CONFIG_COMEDI_VMK80XX=m
CONFIG_COMEDI_NI_COMMON=m
CONFIG_COMEDI_MITE=m
CONFIG_COMEDI_NI_TIO=m
CONFIG_COMEDI_NI_LABPC=m
CONFIG_COMEDI_8255=m
CONFIG_COMEDI_DAS08=m
CONFIG_COMEDI_FC=m
# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
CONFIG_R8187SE=m
CONFIG_RTL8192U=m
# CONFIG_RTLLIB is not set
CONFIG_R8712U=m
CONFIG_RTS_PSTOR=m
# CONFIG_RTS_PSTOR_DEBUG is not set
CONFIG_RTS5139=m
# CONFIG_RTS5139_DEBUG is not set
# CONFIG_TRANZPORT is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6655 is not set
CONFIG_VT6656=m
# CONFIG_VME_BUS is not set
# CONFIG_DX_SEP is not set
# CONFIG_IIO is not set
CONFIG_ZRAM=m
# CONFIG_ZRAM_DEBUG is not set
CONFIG_ZSMALLOC=m
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_CXT1E1 is not set
# CONFIG_FB_XGI is not set
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_SBE_2T3E3 is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_ACNTPC=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
# CONFIG_SPEAKUP_SYNTH_DECPC is not set
CONFIG_SPEAKUP_SYNTH_DTLK=m
CONFIG_SPEAKUP_SYNTH_KEYPC=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_INTEL_MEI is not set
CONFIG_STAGING_MEDIA=y
# CONFIG_DVB_AS102 is not set
# CONFIG_DVB_CXD2099 is not set
# CONFIG_VIDEO_DT3155 is not set
CONFIG_EASYCAP=m
# CONFIG_EASYCAP_DEBUG is not set
# CONFIG_VIDEO_GO7007 is not set
# CONFIG_SOLO6X10 is not set
CONFIG_LIRC_STAGING=y
CONFIG_LIRC_BT829=m
CONFIG_LIRC_IGORPLUGUSB=m
CONFIG_LIRC_IMON=m
# CONFIG_LIRC_PARALLEL is not set
CONFIG_LIRC_SASEM=m
CONFIG_LIRC_SERIAL=m
CONFIG_LIRC_SERIAL_TRANSMITTER=y
CONFIG_LIRC_SIR=m
CONFIG_LIRC_TTUSBIR=m
CONFIG_LIRC_ZILOG=m
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
# CONFIG_USB_WPAN_HCD is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_AIO=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
# CONFIG_FUJITSU_TABLET is not set
CONFIG_AMILO_RFKILL=m
CONFIG_HP_ACCEL=m
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
CONFIG_ACPI_CMPC=m
CONFIG_INTEL_IPS=m
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_STATS is not set
# CONFIG_AMD_IOMMU_V2 is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
CONFIG_NILFS2_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_LOGFS=m
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=m
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_BACKED_BY_BOTH=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_EXOFS_FS=m
# CONFIG_EXOFS_DEBUG is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_V4_1=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DEBUG is not set
CONFIG_CEPH_FS=m
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_FSCACHE=y
CONFIG_CIFS_ACL=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_FSCACHE=y
CONFIG_9P_FS=m
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_KPROBE_EVENT is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
# CONFIG_INTEL_TXT is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
# CONFIG_SECURITY_YAMA is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_VHOST_NET=m
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_AVERAGE=y
CONFIG_CORDIC=m
[-- Attachment #3: dmesg.txt --]
[-- Type: text/plain, Size: 51871 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.4debugpsmouse (mengdaxing@ldebian) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Fri Jul 6 07:44:49 CST 2012
[ 0.000000] Command line: root=/dev/sda7 acpi_backlight=vendor ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007727c000 (usable)
[ 0.000000] BIOS-e820: 000000007727c000 - 0000000077282000 (reserved)
[ 0.000000] BIOS-e820: 0000000077282000 - 00000000773ee000 (usable)
[ 0.000000] BIOS-e820: 00000000773ee000 - 000000007740f000 (reserved)
[ 0.000000] BIOS-e820: 000000007740f000 - 000000007746f000 (usable)
[ 0.000000] BIOS-e820: 000000007746f000 - 0000000077470000 (reserved)
[ 0.000000] BIOS-e820: 0000000077470000 - 00000000774f1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000774f1000 - 000000007770f000 (reserved)
[ 0.000000] BIOS-e820: 000000007770f000 - 0000000077717000 (usable)
[ 0.000000] BIOS-e820: 0000000077717000 - 000000007771f000 (reserved)
[ 0.000000] BIOS-e820: 000000007771f000 - 000000007775e000 (usable)
[ 0.000000] BIOS-e820: 000000007775e000 - 000000007779f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007779f000 - 00000000777e1000 (usable)
[ 0.000000] BIOS-e820: 00000000777e1000 - 00000000777ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000777ff000 - 0000000077800000 (usable)
[ 0.000000] BIOS-e820: 0000000077800000 - 000000007c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0804000 - 00000000f0805000 (reserved)
[ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO G360 /LL1 , BIOS 61CN06WW 10/27/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x77800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 078000000 mask FF8000000 uncachable
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f6200] f6200
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-0000000077800000
[ 0.000000] 0000000000 - 0077800000 page 2M
[ 0.000000] kernel direct mapping tables up to 77800000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 6fc5c000 - 7726c000
[ 0.000000] ACPI: RSDP 00000000000f60c0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000777f2fcb 0005C (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000777e3000 000F4 (v03 LENOVO CB-01 06040000 PTEC 00000001)
[ 0.000000] ACPI: DSDT 00000000777e4000 0BBBF (v02 LENOVO CB-01 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 000000007779bfc0 00040
[ 0.000000] ACPI: HPET 00000000777fed86 00038 (v01 LENOVO CB-01 06040000 PTEC 00000001)
[ 0.000000] ACPI: MCFG 00000000777fedbe 0003C (v01 LENOVO CB-01 06040000 PTEC 00000001)
[ 0.000000] ACPI: APIC 00000000777fedfa 00068 (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000777fee62 00028 (v01 LENOVO CB-01 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000777fee8a 00176 (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000777e2000 009F1 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000077800000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000077800000
[ 0.000000] NODE_DATA [00000000777dd000 - 00000000777e0fff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88006d600000-ffff88006f1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x0007727c
[ 0.000000] 0: 0x00077282 -> 0x000773ee
[ 0.000000] 0: 0x0007740f -> 0x0007746f
[ 0.000000] 0: 0x0007770f -> 0x00077717
[ 0.000000] 0: 0x0007771f -> 0x0007775e
[ 0.000000] 0: 0x0007779f -> 0x000777e1
[ 0.000000] 0: 0x000777ff -> 0x00077800
[ 0.000000] On node 0 totalpages: 488542
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3919 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6636 pages used for memmap
[ 0.000000] DMA32 zone: 477926 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007727c000 - 0000000077282000
[ 0.000000] PM: Registered nosave memory: 00000000773ee000 - 000000007740f000
[ 0.000000] PM: Registered nosave memory: 000000007746f000 - 0000000077470000
[ 0.000000] PM: Registered nosave memory: 0000000077470000 - 00000000774f1000
[ 0.000000] PM: Registered nosave memory: 00000000774f1000 - 000000007770f000
[ 0.000000] PM: Registered nosave memory: 0000000077717000 - 000000007771f000
[ 0.000000] PM: Registered nosave memory: 000000007775e000 - 000000007779f000
[ 0.000000] PM: Registered nosave memory: 00000000777e1000 - 00000000777ff000
[ 0.000000] Allocating PCI resources starting at 7c000000 (gap: 7c000000:64000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88006fa00000 s82304 r8192 d24192 u1048576
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 481845
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda7 acpi_backlight=vendor ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1795820k/1957888k available (3581k kernel code, 3720k absent, 158348k reserved, 3112k data, 604k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 7864320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2127.944 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4255.88 BogoMIPS (lpj=8511776)
[ 0.000152] pid_max: default: 32768 minimum: 301
[ 0.000263] Security Framework initialized
[ 0.000337] AppArmor: AppArmor disabled by boot time parameter
[ 0.000550] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001342] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.001750] Mount-cache hash table entries: 256
[ 0.002029] Initializing cgroup subsys cpuacct
[ 0.002102] Initializing cgroup subsys memory
[ 0.002186] Initializing cgroup subsys devices
[ 0.002256] Initializing cgroup subsys freezer
[ 0.002329] Initializing cgroup subsys net_cls
[ 0.002401] Initializing cgroup subsys blkio
[ 0.002477] Initializing cgroup subsys perf_event
[ 0.002578] CPU: Physical Processor ID: 0
[ 0.002649] CPU: Processor Core ID: 0
[ 0.002723] mce: CPU supports 9 MCE banks
[ 0.002801] CPU0: Thermal monitoring handled by SMI
[ 0.002809] using mwait in idle threads.
[ 0.003914] ACPI: Core revision 20120320
[ 0.023535] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063288] CPU0: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz stepping 05
[ 0.171347] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.171623] CPUID marked event: 'bus cycles' unavailable
[ 0.171703] ... version: 3
[ 0.171778] ... bit width: 48
[ 0.171852] ... generic registers: 4
[ 0.171924] ... value mask: 0000ffffffffffff
[ 0.172004] ... max period: 000000007fffffff
[ 0.172081] ... fixed-purpose events: 3
[ 0.172155] ... event mask: 000000070000000f
[ 0.172378] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.172571] Booting Node 0, Processors #1 Ok.
[ 0.183639] CPU1: Thermal monitoring handled by SMI
[ 0.185751] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.185876] Brought up 2 CPUs
[ 0.185950] Total of 2 processors activated (8511.77 BogoMIPS).
[ 0.187257] devtmpfs: initialized
[ 0.191456] PM: Registering ACPI NVS region [mem 0x77470000-0x774f0fff] (528384 bytes)
[ 0.191583] PM: Registering ACPI NVS region [mem 0x7775e000-0x7779efff] (266240 bytes)
[ 0.191796] dummy:
[ 0.191928] NET: Registered protocol family 16
[ 0.192125] ACPI: bus type pci registered
[ 0.192282] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.192390] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.237602] PCI: Using configuration type 1 for base access
[ 0.238306] bio: create slab <bio-0> at 0
[ 0.238474] ACPI: Added _OSI(Module Device)
[ 0.238552] ACPI: Added _OSI(Processor Device)
[ 0.238628] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.238705] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.240327] ACPI: EC: Look up EC in DSDT
[ 0.248392] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.248946] ACPI: SSDT 000000007771ac18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.249509] ACPI: Dynamic OEM Table Load:
[ 0.249671] ACPI: SSDT (null) 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.250043] ACPI: SSDT 0000000077718018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.253054] ACPI: Dynamic OEM Table Load:
[ 0.253210] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.253756] ACPI: SSDT 0000000077719a98 00303 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.254386] ACPI: Dynamic OEM Table Load:
[ 0.254543] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.254896] ACPI: SSDT 0000000077717d98 00119 (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.255474] ACPI: Dynamic OEM Table Load:
[ 0.255634] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.266004] ACPI: Interpreter enabled
[ 0.266080] ACPI: (supports S0 S3 S4 S5)
[ 0.266346] ACPI: Using IOAPIC for interrupt routing
[ 0.276657] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.276940] ACPI: No dock devices found.
[ 0.277017] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.277608] \_SB_.PCI0:_OSC invalid UUID
[ 0.277610] _OSC request data:1 8 1f
[ 0.277614] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.278450] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.278533] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.278616] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.278719] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.278828] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.278931] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.279033] pci_root PNP0A08:00: host bridge window [mem 0x7c000000-0xfeafffff]
[ 0.279174] PCI host bridge to bus 0000:00
[ 0.279249] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.279330] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.279411] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.279497] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.279582] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.279664] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.279750] pci_bus 0000:00: root bus resource [mem 0x7c000000-0xfeafffff]
[ 0.279842] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.279861] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.279986] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.280020] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.280035] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.280047] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.280054] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.280060] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.280136] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.280162] pci 0000:00:1a.0: reg 10: [mem 0xf0806000-0xf08063ff]
[ 0.280275] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.280311] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.280333] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
[ 0.280432] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.280464] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.280568] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.280601] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.280702] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.280739] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.280843] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.280885] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.280910] pci 0000:00:1d.0: reg 10: [mem 0xf0806400-0xf08067ff]
[ 0.281023] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.281052] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.281141] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.281275] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.281302] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
[ 0.281313] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
[ 0.281325] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
[ 0.281336] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
[ 0.281348] pci 0000:00:1f.2: reg 20: [io 0x1820-0x183f]
[ 0.281359] pci 0000:00:1f.2: reg 24: [mem 0xf0805000-0xf08057ff]
[ 0.281428] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.281455] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.281477] pci 0000:00:1f.3: reg 10: [mem 0xf0806800-0xf08068ff 64bit]
[ 0.281508] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
[ 0.281560] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.281589] pci 0000:00:1f.6: reg 10: [mem 0xf0804000-0xf0804fff 64bit]
[ 0.281740] pci 0000:01:00.0: [10de:0a70] type 00 class 0x030000
[ 0.281756] pci 0000:01:00.0: reg 10: [mem 0xac000000-0xacffffff]
[ 0.281773] pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.281789] pci 0000:01:00.0: reg 1c: [mem 0xae000000-0xafffffff 64bit pref]
[ 0.281801] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.281814] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.281918] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.281998] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.282001] pci 0000:00:01.0: bridge window [mem 0xac000000-0xadefffff]
[ 0.282005] pci 0000:00:01.0: bridge window [mem 0xae000000-0xbfffffff 64bit pref]
[ 0.282063] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.282245] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[ 0.282288] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf050ffff 64bit]
[ 0.282491] pci 0000:03:00.0: supports D1
[ 0.282493] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.282580] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.282664] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.282751] pci 0000:08:00.0: [1969:2060] type 00 class 0x020000
[ 0.282782] pci 0000:08:00.0: reg 10: [mem 0xf0400000-0xf043ffff 64bit]
[ 0.282798] pci 0000:08:00.0: reg 18: [io 0x3000-0x307f]
[ 0.282932] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.289711] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[ 0.289804] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.289810] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.289891] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
[ 0.289988] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.289990] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.289993] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.289996] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.289998] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.290001] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.290003] pci 0000:00:1e.0: bridge window [mem 0x7c000000-0xfeafffff] (subtractive decode)
[ 0.290033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.290300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.290377] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.290545] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.290614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.290689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.290838] \_SB_.PCI0:_OSC invalid UUID
[ 0.290839] _OSC request data:1 1f 1f
[ 0.290844] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.290967] \_SB_.PCI0:_OSC invalid UUID
[ 0.290968] _OSC request data:1 0 1d
[ 0.290972] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.291077] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.297378] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.297535] PCI host bridge to bus 0000:ff
[ 0.297612] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.297634] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.297657] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.297677] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.297700] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.297719] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.297754] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.297834] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.297940] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.298274] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.298909] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.299603] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.300234] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.300864] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.301604] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.302351] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.303042] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.303722] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.303836] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.303945] vgaarb: loaded
[ 0.304015] vgaarb: bridge control possible 0000:01:00.0
[ 0.304093] vgaarb: no bridge control possible 0000:00:02.0
[ 0.304202] PCI: Using ACPI for IRQ routing
[ 0.314171] PCI: pci_cache_line_size set to 64 bytes
[ 0.314267] reserve RAM buffer: 000000000009c400 - 000000000009ffff
[ 0.314270] reserve RAM buffer: 000000007727c000 - 0000000077ffffff
[ 0.314276] reserve RAM buffer: 00000000773ee000 - 0000000077ffffff
[ 0.314281] reserve RAM buffer: 000000007746f000 - 0000000077ffffff
[ 0.314285] reserve RAM buffer: 0000000077717000 - 0000000077ffffff
[ 0.314289] reserve RAM buffer: 000000007775e000 - 0000000077ffffff
[ 0.314292] reserve RAM buffer: 00000000777e1000 - 0000000077ffffff
[ 0.314294] reserve RAM buffer: 0000000077800000 - 0000000077ffffff
[ 0.314432] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.314891] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.316987] Switching to clocksource hpet
[ 0.318876] pnp: PnP ACPI init
[ 0.318967] ACPI: bus type pnp registered
[ 0.319447] pnp 00:00: [bus 00-fe]
[ 0.319450] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.319452] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.319455] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.319457] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.319460] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.319462] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.319464] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.319466] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.319468] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.319470] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.319473] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.319475] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.319477] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.319479] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.319481] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.319483] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.319485] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.319487] pnp 00:00: [mem 0x7c000000-0xfeafffff window]
[ 0.319489] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.319547] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.319655] pnp 00:01: [io 0x0000-0x001f]
[ 0.319657] pnp 00:01: [io 0x0081-0x0091]
[ 0.319659] pnp 00:01: [io 0x0093-0x009f]
[ 0.319661] pnp 00:01: [io 0x00c0-0x00df]
[ 0.319663] pnp 00:01: [dma 4]
[ 0.319699] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.319708] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.319741] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.319830] pnp 00:03: [irq 0 disabled]
[ 0.319841] pnp 00:03: [irq 8]
[ 0.319843] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.319880] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.319892] pnp 00:04: [io 0x00f0]
[ 0.319899] pnp 00:04: [irq 13]
[ 0.319932] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.319945] pnp 00:05: [io 0x002e-0x002f]
[ 0.319947] pnp 00:05: [io 0x004e-0x004f]
[ 0.319949] pnp 00:05: [io 0x0061]
[ 0.319951] pnp 00:05: [io 0x0063]
[ 0.319953] pnp 00:05: [io 0x0065]
[ 0.319954] pnp 00:05: [io 0x0067]
[ 0.319956] pnp 00:05: [io 0x0070]
[ 0.319958] pnp 00:05: [io 0x0080]
[ 0.319960] pnp 00:05: [io 0x0092]
[ 0.319961] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.319963] pnp 00:05: [io 0x0680-0x069f]
[ 0.319965] pnp 00:05: [io 0x0500-0x050f]
[ 0.319967] pnp 00:05: [io 0x0600-0x0603]
[ 0.319968] pnp 00:05: [io 0xffff]
[ 0.319970] pnp 00:05: [io 0x0400-0x047f]
[ 0.319972] pnp 00:05: [io 0x1180-0x11ff]
[ 0.319974] pnp 00:05: [io 0x164e-0x164f]
[ 0.319975] pnp 00:05: [io 0xfe00]
[ 0.319977] pnp 00:05: [io 0x0068]
[ 0.319979] pnp 00:05: [io 0x006c]
[ 0.319981] pnp 00:05: [io 0x0700-0x070f]
[ 0.320046] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.320127] system 00:05: [io 0x0500-0x050f] has been reserved
[ 0.320208] system 00:05: [io 0x0600-0x0603] has been reserved
[ 0.320287] system 00:05: [io 0xffff] has been reserved
[ 0.320368] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.320450] system 00:05: [io 0x1180-0x11ff] has been reserved
[ 0.320531] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.320611] system 00:05: [io 0xfe00] has been reserved
[ 0.320692] system 00:05: [io 0x0700-0x070f] has been reserved
[ 0.320773] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.320810] pnp 00:06: [io 0x06a0-0x06af]
[ 0.320812] pnp 00:06: [io 0x06b0-0x06ff]
[ 0.320864] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.320947] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.321031] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.321083] pnp 00:07: [io 0x0070-0x0077]
[ 0.321120] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.321151] pnp 00:08: [io 0x0060]
[ 0.321153] pnp 00:08: [io 0x0064]
[ 0.321159] pnp 00:08: [irq 1]
[ 0.321196] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.321210] pnp 00:09: [irq 12]
[ 0.321244] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.321546] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.321548] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[ 0.321551] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.321553] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.321555] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.321557] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.321559] pnp 00:0a: [mem 0xfeaff000-0xfeafffff]
[ 0.321561] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.321564] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[ 0.321566] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.321567] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.321569] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.321571] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.321636] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.321719] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.321803] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.321888] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.321971] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.322054] system 00:0a: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.322137] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.322220] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.322307] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.322391] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.322473] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.322558] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.322745] pnp 00:0b: [bus ff]
[ 0.322787] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.323136] pnp: PnP ACPI: found 12 devices
[ 0.323213] ACPI: ACPI bus type pnp unregistered
[ 0.330295] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
[ 0.330300] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
[ 0.330303] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000
[ 0.330315] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000
[ 0.330319] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 0.330331] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08-08] add_size 200000
[ 0.330350] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.330353] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.330356] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.330359] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.330362] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.330365] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.330371] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7c000000-0x7c1fffff]
[ 0.330456] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7c200000-0x7c3fffff 64bit pref]
[ 0.330561] pci 0000:00:1c.1: BAR 15: assigned [mem 0x7c400000-0x7c5fffff 64bit pref]
[ 0.330668] pci 0000:00:1c.4: BAR 15: assigned [mem 0x7c600000-0x7c7fffff 64bit pref]
[ 0.330772] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.330855] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.330938] pci 0000:01:00.0: BAR 6: assigned [mem 0xad000000-0xad07ffff pref]
[ 0.331043] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.331121] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.331203] pci 0000:00:01.0: bridge window [mem 0xac000000-0xadefffff]
[ 0.331289] pci 0000:00:01.0: bridge window [mem 0xae000000-0xbfffffff 64bit pref]
[ 0.331395] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.331474] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.331559] pci 0000:00:1c.0: bridge window [mem 0x7c000000-0x7c1fffff]
[ 0.331644] pci 0000:00:1c.0: bridge window [mem 0x7c200000-0x7c3fffff 64bit pref]
[ 0.331754] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.331833] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.331919] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.332004] pci 0000:00:1c.1: bridge window [mem 0x7c400000-0x7c5fffff 64bit pref]
[ 0.332113] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[ 0.332191] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.332278] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.332362] pci 0000:00:1c.4: bridge window [mem 0x7c600000-0x7c7fffff 64bit pref]
[ 0.332473] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[ 0.332598] pci 0000:00:1e.0: setting latency timer to 64
[ 0.332603] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.332605] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.332608] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.332610] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.332612] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.332614] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.332617] pci_bus 0000:00: resource 10 [mem 0x7c000000-0xfeafffff]
[ 0.332619] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.332621] pci_bus 0000:01: resource 1 [mem 0xac000000-0xadefffff]
[ 0.332623] pci_bus 0000:01: resource 2 [mem 0xae000000-0xbfffffff 64bit pref]
[ 0.332626] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.332628] pci_bus 0000:02: resource 1 [mem 0x7c000000-0x7c1fffff]
[ 0.332630] pci_bus 0000:02: resource 2 [mem 0x7c200000-0x7c3fffff 64bit pref]
[ 0.332633] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.332635] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.332637] pci_bus 0000:03: resource 2 [mem 0x7c400000-0x7c5fffff 64bit pref]
[ 0.332640] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
[ 0.332642] pci_bus 0000:08: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.332644] pci_bus 0000:08: resource 2 [mem 0x7c600000-0x7c7fffff 64bit pref]
[ 0.332647] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.332649] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 0.332651] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.332654] pci_bus 0000:0a: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.332656] pci_bus 0000:0a: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.332658] pci_bus 0000:0a: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.332660] pci_bus 0000:0a: resource 10 [mem 0x7c000000-0xfeafffff]
[ 0.332729] NET: Registered protocol family 2
[ 0.332897] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.333466] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.334843] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.335247] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.335331] TCP: reno registered
[ 0.335410] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.335504] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.335707] NET: Registered protocol family 1
[ 0.335803] pci 0000:00:02.0: Boot video device
[ 0.335958] PCI: CLS 64 bytes, default 64
[ 0.336011] Unpacking initramfs...
[ 3.245563] Freeing initrd memory: 120896k freed
[ 3.273293] Simple Boot Flag at 0x36 set to 0x1
[ 3.273831] audit: initializing netlink socket (disabled)
[ 3.273922] type=2000 audit(1341562754.156:1): initialized
[ 3.288222] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.288784] VFS: Disk quotas dquot_6.5.2
[ 3.288880] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.289038] msgmni has been set to 3743
[ 3.289283] alg: No test for stdrng (krng)
[ 3.289384] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.289488] io scheduler noop registered
[ 3.289561] io scheduler deadline registered
[ 3.289654] io scheduler cfq registered (default)
[ 3.289846] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 3.290068] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.290167] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.290253] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.290753] intel_idle: MWAIT substates: 0x120
[ 3.290755] intel_idle: v0.4 model 0x25
[ 3.290757] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.290797] GHES: HEST is not enabled!
[ 3.290925] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.291519] Linux agpgart interface v0.103
[ 3.291665] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 3.291875] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 3.292818] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 3.293050] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.293246] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.295598] i8042: Detected active multiplexing controller, rev 1.1
[ 3.298110] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.298190] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.300793] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.300893] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.300987] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.301178] mousedev: PS/2 mouse device common for all mice
[ 3.301305] rtc_cmos 00:07: RTC can wake from S4
[ 3.301520] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.301635] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.301755] cpuidle: using governor ladder
[ 3.301867] cpuidle: using governor menu
[ 3.302152] TCP: cubic registered
[ 3.302357] NET: Registered protocol family 10
[ 3.302911] Mobile IPv6
[ 3.302993] NET: Registered protocol family 17
[ 3.303081] Registering the dns_resolver key type
[ 3.303550] PM: Hibernation image not present or could not be loaded.
[ 3.303572] registered taskstats version 1
[ 3.304631] rtc_cmos 00:07: setting system clock to 2012-07-06 08:19:14 UTC (1341562754)
[ 3.304838] Initializing network drop monitor service
[ 3.320857] Freeing unused kernel memory: 604k freed
[ 3.321101] Write protecting the kernel read-only data: 6144k
[ 3.325645] Freeing unused kernel memory: 496k freed
[ 3.331899] Freeing unused kernel memory: 720k freed
[ 3.347289] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.405505] udev[54]: starting version 164
[ 3.430780] usbcore: registered new interface driver usbfs
[ 3.430890] usbcore: registered new interface driver hub
[ 3.439377] usbcore: registered new device driver usb
[ 3.440440] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.440568] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.440572] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.440677] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.440807] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.444858] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.444880] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0806000
[ 3.455829] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.455959] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.456043] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.456148] usb usb1: Product: EHCI Host Controller
[ 3.456226] usb usb1: Manufacturer: Linux 3.4.4debugpsmouse ehci_hcd
[ 3.456308] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.457498] hub 1-0:1.0: USB hub found
[ 3.457580] hub 1-0:1.0: 3 ports detected
[ 3.457827] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.457831] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.457922] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.458060] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.462299] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.477960] SCSI subsystem initialized
[ 3.492745] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0806400
[ 3.495430] libata version 3.00 loaded.
[ 3.503846] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.503967] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.504067] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.504169] usb usb2: Product: EHCI Host Controller
[ 3.504249] usb usb2: Manufacturer: Linux 3.4.4debugpsmouse ehci_hcd
[ 3.504329] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.504674] hub 2-0:1.0: USB hub found
[ 3.504754] hub 2-0:1.0: 3 ports detected
[ 3.504924] ahci 0000:00:1f.2: version 3.0
[ 3.505006] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 3.505054] ahci: SSS flag set, parallel bus scan disabled
[ 3.505177] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x32 impl SATA mode
[ 3.505284] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 3.505397] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.522590] scsi0 : ahci
[ 3.522895] scsi1 : ahci
[ 3.523099] scsi2 : ahci
[ 3.523297] scsi3 : ahci
[ 3.523498] scsi4 : ahci
[ 3.523655] scsi5 : ahci
[ 3.523924] ata1: DUMMY
[ 3.524007] ata2: SATA max UDMA/133 abar m2048@0xf0805000 port 0xf0805180 irq 41
[ 3.524125] ata3: DUMMY
[ 3.524204] ata4: DUMMY
[ 3.524283] ata5: SATA max UDMA/133 abar m2048@0xf0805000 port 0xf0805300 irq 41
[ 3.524402] ata6: SATA max UDMA/133 abar m2048@0xf0805000 port 0xf0805380 irq 41
[ 3.535418] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.535506] ACPI: Thermal Zone [TZ00] (60 C)
[ 3.564361] atl1c 0000:08:00.0: version 1.0.1.0-NAPI
[ 3.767668] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.843661] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.894266] ata2.00: ATA-8: TOSHIBA MK3265GSX, GJ205E, max UDMA/100
[ 3.894357] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.895437] ata2.00: configured for UDMA/100
[ 3.895888] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK3265GS GJ20 PQ: 0 ANSI: 5
[ 3.899981] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 3.900072] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.900548] hub 1-1:1.0: USB hub found
[ 3.900678] hub 1-1:1.0: 6 ports detected
[ 4.011567] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 4.143882] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 4.143975] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.144569] hub 2-1:1.0: USB hub found
[ 4.144711] hub 2-1:1.0: 8 ports detected
[ 4.215510] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.215716] usb 1-1.1: new low-speed USB device number 3 using ehci_hcd
[ 4.218558] ata5.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
[ 4.219599] ata5.00: configured for UDMA/100
[ 4.227265] scsi 4:0:0:0: CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
[ 4.271453] Refined TSC clocksource calibration: 2127.999 MHz.
[ 4.271544] Switching to clocksource tsc
[ 4.311556] usb 1-1.1: New USB device found, idVendor=15d9, idProduct=0a4f
[ 4.311650] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.311761] usb 1-1.1: Product: USB OPTICAL MOUSE
[ 4.415520] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[ 4.511100] usb 2-1.2: New USB device found, idVendor=0079, idProduct=0011
[ 4.511193] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4.511305] usb 2-1.2: Product: USB Gamepad
[ 4.518042] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
[ 4.518429] generic-usb 0003:15D9:0A4F.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.1/input0
[ 4.518604] usbcore: registered new interface driver usbhid
[ 4.518680] usbhid: USB HID core driver
[ 4.547353] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.554025] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4.554165] sd 1:0:0:0: [sda] Write Protect is off
[ 4.554239] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.554256] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.583582] usb 2-1.4: new high-speed USB device number 4 using ehci_hcd
[ 4.683255] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[ 4.684402] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.690404] usb 2-1.4: New USB device found, idVendor=5986, idProduct=0294
[ 4.690499] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.690611] usb 2-1.4: Product: Lenovo EasyCamera
[ 4.690692] usb 2-1.4: Manufacturer: Bison Corp.
[ 4.692019] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.692134] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.692470] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.696486] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 4.696926] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 5.493900] nbd: registered device at major 43
[ 5.508606] device-mapper: uevent: version 1.0.3
[ 5.508762] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 5.657354] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 18.294207] udev[383]: starting version 164
[ 18.555668] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 18.556150] ACPI: Lid Switch [LID]
[ 18.556305] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 18.556413] ACPI: Power Button [PWRB]
[ 18.556528] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 18.556635] ACPI: Sleep Button [SLPB]
[ 18.556752] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 18.556855] ACPI: Power Button [PWRF]
[ 18.653769] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 18.676333] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 18.680954] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 18.815230] wmi: Mapper loaded
[ 19.124632] intel ips 0000:00:1f.6: No CPUID match found.
[ 19.127145] intel ips 0000:00:1f.6: IPS not supported on this CPU
[ 19.149616] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 19.149825] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.314993] ACPI: Requesting acpi_cpufreq
[ 19.565379] input: USB Gamepad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input6
[ 19.565574] dragonrise 0003:0079:0011.0002: input,hidraw1: USB HID v1.10 Joystick [USB Gamepad ] on usb-0000:00:1d.0-1.2/input0
[ 19.582462] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 19.836138] cfg80211: Calling CRDA to update world regulatory domain
[ 19.887919] input: Ideapad extra buttons as /devices/platform/ideapad/input/input8
[ 19.893749] [drm] Initialized drm 1.1.0 20060810
[ 19.995850] psmouse serio4: alps: E6 report: 00 00 64
[ 20.021288] psmouse serio4: alps: E7 report: 73 03 50
[ 20.623609] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input9
[ 21.006657] ACPI: Battery Slot [BAT1] (battery present)
[ 21.015326] ACPI: AC Adapter [ACAD] (on-line)
[ 21.356936] Linux media interface: v0.10
[ 21.396786] Linux video capture interface: v2.00
[ 21.830632] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0294)
[ 21.833106] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input10
[ 21.833364] usbcore: registered new interface driver uvcvideo
[ 21.833445] USB Video Class driver (1.1.1)
[ 22.038803] i915 0000:00:02.0: setting latency timer to 64
[ 22.121798] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 22.121817] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 22.121899] [drm] Driver supports precise vblank timestamp query.
[ 22.122069] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 22.122177] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 22.122284] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 22.496801] ath: EEPROM regdomain: 0x65
[ 22.496804] ath: EEPROM indicates we should expect a direct regpair map
[ 22.496807] ath: Country alpha2 being used: 00
[ 22.496809] ath: Regpair used: 0x65
[ 22.535161] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 22.535534] Registered led device: ath9k-phy0
[ 22.535541] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90010920000, irq=17
[ 22.535917] fbcon: inteldrmfb (fb0) is primary device
[ 22.799152] Console: switching to colour frame buffer device 170x48
[ 22.806607] fb0: inteldrmfb frame buffer device
[ 22.806610] drm: registered panic notifier
[ 22.806998] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20120320/video-1147)
[ 22.807053] video: probe of LNXVIDEO:00 failed with error 5
[ 22.809605] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
[ 22.809787] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 22.810055] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 22.810206] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 22.894010] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[ 22.898023] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 22.898274] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 23.126704] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 23.187223] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 23.414919] loop: module loaded
[ 24.827362] fuse init (API version 7.18)
[ 25.459851] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.974276] Clocksource tsc unstable (delta = -210870030 ns)
[ 27.506101] atl1c 0000:08:00.0: irq 44 for MSI/MSI-X
[ 28.273294] Switching to clocksource hpet
[ 28.820898] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[ 28.868835] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.920852] sshd (1576): /proc/1576/oom_adj is deprecated, please use /proc/1576/oom_score_adj instead.
[ 53.127222] wlan0: authenticate with ec:17:2f:2f:e9:b6
[ 53.140570] wlan0: send auth to ec:17:2f:2f:e9:b6 (try 1/3)
[ 53.142929] wlan0: authenticated
[ 53.150758] wlan0: associate with ec:17:2f:2f:e9:b6 (try 1/3)
[ 53.154956] wlan0: RX AssocResp from ec:17:2f:2f:e9:b6 (capab=0x431 status=0 aid=2)
[ 53.154959] wlan0: associated
[ 53.161879] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 63.910209] wlan0: no IPv6 routers present
[-- Attachment #4: DMI.txt --]
[-- Type: text/plain, Size: 853 bytes --]
/sys/class/dmi/id/bios_date: 10/27/2011
/sys/class/dmi/id/bios_vendor: LENOVO
/sys/class/dmi/id/bios_version: 61CN06WW
/sys/class/dmi/id/board_asset_tag:
/sys/class/dmi/id/board_name: LL1
/sys/class/dmi/id/board_vendor: Lenovo
/sys/class/dmi/id/board_version: Rev 1.0
/sys/class/dmi/id/chassis_asset_tag: No Asset Tag
/sys/class/dmi/id/chassis_type: 10
/sys/class/dmi/id/chassis_vendor: Lenovo
/sys/class/dmi/id/chassis_version: Rev 1.0
/sys/class/dmi/id/modalias: dmi:bvnLENOVO:bvr61CN06WW:bd10/27/2011:svnLENOVO:pnG360:pvrRev1.0:rvnLenovo:rnLL1:rvrRev1.0:cvnLenovo:ct10:cvrRev1.0:
/sys/class/dmi/id/product_name: G360
/sys/class/dmi/id/product_version: Rev 1.0
/sys/class/dmi/id/sys_vendor: LENOVO
/sys/class/dmi/id/uevent: MODALIAS=dmi:bvnLENOVO:bvr61CN06WW:bd10/27/2011:svnLENOVO:pnG360:pvrRev1.0:rvnLenovo:rnLL1:rvrRev1.0:cvnLenovo:ct10:cvrRev1.0:
[-- Attachment #5: inputdevices.txt --]
[-- Type: text/plain, Size: 4000 bytes --]
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0003 Vendor=15d9 Product=0a4f Version=0111
N: Name=" USB OPTICAL MOUSE"
P: Phys=usb-0000:00:1a.0-1.1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
U: Uniq=
H: Handlers=mouse0 event1
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=103
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event2
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=3
B: KEY=4000 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0003 Vendor=0079 Product=0011 Version=0110
N: Name="USB Gamepad "
P: Phys=usb-0000:00:1d.0-1.2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input6
U: Uniq=
H: Handlers=event6 js0
B: PROP=0
B: EV=1b
B: KEY=3ff00000000 0 0 0 0
B: ABS=3
B: MSC=10
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input7
U: Uniq=
H: Handlers=kbd event7
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Ideapad extra buttons"
P: Phys=ideapad/input0
S: Sysfs=/devices/platform/ideapad/input/input8
U: Uniq=
H: Handlers=kbd rfkill event8
B: PROP=0
B: EV=13
B: KEY=1400800000000 300000 0 0
B: MSC=10
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio4/input0
S: Sysfs=/devices/platform/i8042/serio4/input/input9
U: Uniq=
H: Handlers=mouse1 event9
B: PROP=0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
I: Bus=0003 Vendor=5986 Product=0294 Version=1403
N: Name="Lenovo EasyCamera"
P: Phys=usb-0000:00:1d.0-1.4/button
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input10
U: Uniq=
H: Handlers=kbd event10
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
U: Uniq=
H: Handlers=kbd event11
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0001 Vendor=10ec Product=0272 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/input/input12
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
U: Uniq=
H: Handlers=event13
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
U: Uniq=
H: Handlers=event14
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0003 Vendor=0000 Product=0000 Version=0004
N: Name="ACPI Virtual Keyboard Device"
P: Phys=
S: Sysfs=/devices/virtual/input/input15
U: Uniq=
H: Handlers=sysrq kbd rfkill event15
B: PROP=0
B: EV=3
B: KEY=ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe
[-- Attachment #6: xinputlist.txt --]
[-- Type: text/plain, Size: 4039 bytes --]
⎡ Virtual core pointer id=2 [master pointer (3)]
Reporting 3 classes:
Class originated from: 10
Buttons supported: 10
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right None None None
Button state:
Class originated from: 10
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
Class originated from: 10
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 4
Buttons supported: 10
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right None None None
Button state:
Class originated from: 4
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 4
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
⎜ ↳ USB OPTICAL MOUSE id=10 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 10
Buttons supported: 7
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right
Button state:
Class originated from: 10
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
Class originated from: 10
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
⎜ ↳ PS/2 Generic Mouse id=13 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 13
Buttons supported: 5
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down
Button state:
Class originated from: 13
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
Class originated from: 13
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
⎣ Virtual core keyboard id=3 [master keyboard (2)]
Reporting 1 classes:
Class originated from: 12
Keycodes supported: 248
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 5
Keycodes supported: 248
↳ Power Button id=6 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 6
Keycodes supported: 248
↳ Video Bus id=7 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 7
Keycodes supported: 248
↳ Power Button id=8 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 8
Keycodes supported: 248
↳ Sleep Button id=9 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 9
Keycodes supported: 248
↳ Lenovo EasyCamera id=11 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 11
Keycodes supported: 248
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 12
Keycodes supported: 248
↳ Ideapad extra buttons id=14 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 14
Keycodes supported: 248
↳ ACPI Virtual Keyboard Device id=15 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 15
Keycodes supported: 248
[-- Attachment #7: Xorg.0.log --]
[-- Type: application/octet-stream, Size: 30392 bytes --]
[ 30.699]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 30.699] X Protocol Version 11, Revision 0
[ 30.699] Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian
[ 30.699] Current Operating System: Linux ldebian 3.4.4debugpsmouse #1 SMP Fri Jul 6 07:44:49 CST 2012 x86_64
[ 30.699] Kernel command line: root=/dev/sda7 acpi_backlight=vendor ro
[ 30.699] Build Date: 28 August 2011 09:39:43PM
[ 30.699] xorg-server 2:1.10.4-1~bpo60+1 (Cyril Brulebois <kibi@debian.org>)
[ 30.699] Current version of pixman: 0.24.0
[ 30.699] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 30.699] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.699] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 6 08:19:42 2012
[ 30.720] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 30.720] (==) No Layout section. Using the first Screen section.
[ 30.720] (==) No screen section available. Using defaults.
[ 30.720] (**) |-->Screen "Default Screen Section" (0)
[ 30.720] (**) | |-->Monitor "<default monitor>"
[ 30.720] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 30.720] (==) Automatically adding devices
[ 30.720] (==) Automatically enabling devices
[ 30.720] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 30.720] Entry deleted from font path.
[ 30.720] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 30.720] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 30.720] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 30.720] (II) Loader magic: 0x7d3ae0
[ 30.720] (II) Module ABI versions:
[ 30.720] X.Org ANSI C Emulation: 0.4
[ 30.720] X.Org Video Driver: 10.0
[ 30.720] X.Org XInput driver : 12.2
[ 30.720] X.Org Server Extension : 5.0
[ 30.721] (--) PCI:*(0:0:2:0) 8086:0046:17aa:3920 rev 24, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 30.721] (--) PCI: (0:1:0:0) 10de:0a70:17aa:3968 rev 162, Mem @ 0xac000000/16777216, 0xb0000000/268435456, 0xae000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 30.721] (II) Open ACPI successful (/var/run/acpid.socket)
[ 30.721] (II) LoadModule: "extmod"
[ 30.750] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 30.751] (II) Module extmod: vendor="X.Org Foundation"
[ 30.751] compiled for 1.10.4, module version = 1.0.0
[ 30.751] Module class: X.Org Server Extension
[ 30.751] ABI class: X.Org Server Extension, version 5.0
[ 30.751] (II) Loading extension SELinux
[ 30.751] (II) Loading extension MIT-SCREEN-SAVER
[ 30.751] (II) Loading extension XFree86-VidModeExtension
[ 30.751] (II) Loading extension XFree86-DGA
[ 30.751] (II) Loading extension DPMS
[ 30.751] (II) Loading extension XVideo
[ 30.751] (II) Loading extension XVideo-MotionCompensation
[ 30.751] (II) Loading extension X-Resource
[ 30.751] (II) LoadModule: "dbe"
[ 30.751] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 30.751] (II) Module dbe: vendor="X.Org Foundation"
[ 30.751] compiled for 1.10.4, module version = 1.0.0
[ 30.751] Module class: X.Org Server Extension
[ 30.751] ABI class: X.Org Server Extension, version 5.0
[ 30.751] (II) Loading extension DOUBLE-BUFFER
[ 30.751] (II) LoadModule: "glx"
[ 30.752] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 30.752] (II) Module glx: vendor="X.Org Foundation"
[ 30.752] compiled for 1.10.4, module version = 1.0.0
[ 30.752] ABI class: X.Org Server Extension, version 5.0
[ 30.752] (==) AIGLX enabled
[ 30.752] (II) Loading extension GLX
[ 30.752] (II) LoadModule: "record"
[ 30.752] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 30.752] (II) Module record: vendor="X.Org Foundation"
[ 30.752] compiled for 1.10.4, module version = 1.13.0
[ 30.752] Module class: X.Org Server Extension
[ 30.752] ABI class: X.Org Server Extension, version 5.0
[ 30.752] (II) Loading extension RECORD
[ 30.752] (II) LoadModule: "dri"
[ 30.753] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 30.753] (II) Module dri: vendor="X.Org Foundation"
[ 30.753] compiled for 1.10.4, module version = 1.0.0
[ 30.753] ABI class: X.Org Server Extension, version 5.0
[ 30.753] (II) Loading extension XFree86-DRI
[ 30.753] (II) LoadModule: "dri2"
[ 30.753] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.754] (II) Module dri2: vendor="X.Org Foundation"
[ 30.754] compiled for 1.10.4, module version = 1.2.0
[ 30.754] ABI class: X.Org Server Extension, version 5.0
[ 30.754] (II) Loading extension DRI2
[ 30.754] (==) Matched intel as autoconfigured driver 0
[ 30.754] (==) Matched vesa as autoconfigured driver 1
[ 30.754] (==) Matched fbdev as autoconfigured driver 2
[ 30.754] (==) Assigned the driver to the xf86ConfigLayout
[ 30.754] (II) LoadModule: "intel"
[ 30.754] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 30.754] (II) Module intel: vendor="X.Org Foundation"
[ 30.754] compiled for 1.10.4, module version = 2.15.0
[ 30.754] Module class: X.Org Video Driver
[ 30.754] ABI class: X.Org Video Driver, version 10.0
[ 30.754] (II) LoadModule: "vesa"
[ 30.755] (WW) Warning, couldn't open module vesa
[ 30.755] (II) UnloadModule: "vesa"
[ 30.755] (II) Unloading vesa
[ 30.755] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 30.755] (II) LoadModule: "fbdev"
[ 30.755] (WW) Warning, couldn't open module fbdev
[ 30.755] (II) UnloadModule: "fbdev"
[ 30.755] (II) Unloading fbdev
[ 30.755] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 30.755] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 30.756] (++) using VT number 7
[ 30.762] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 30.762] drmOpenDevice: node name is /dev/dri/card0
[ 30.762] drmOpenDevice: open result is 9, (OK)
[ 30.762] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 30.762] drmOpenDevice: node name is /dev/dri/card0
[ 30.762] drmOpenDevice: open result is 9, (OK)
[ 30.762] drmOpenByBusid: drmOpenMinor returns 9
[ 30.762] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 30.762] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 30.762] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 30.763] (==) intel(0): RGB weight 888
[ 30.763] (==) intel(0): Default visual is TrueColor
[ 30.763] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 30.763] (--) intel(0): Chipset: "Arrandale"
[ 30.763] (**) intel(0): Relaxed fencing enabled
[ 30.763] (**) intel(0): Framebuffer tiled
[ 30.763] (**) intel(0): Pixmaps tiled
[ 30.763] (**) intel(0): 3D buffers tiled
[ 30.763] (**) intel(0): SwapBuffers wait enabled
[ 30.763] (==) intel(0): video overlay key set to 0x101fe
[ 30.763] (II) intel(0): Output LVDS1 has no monitor section
[ 30.763] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[ 30.763] (II) intel(0): Output VGA1 has no monitor section
[ 30.763] (II) intel(0): EDID for output LVDS1
[ 30.763] (II) intel(0): Manufacturer: AUO Model: 402c Serial#: 0
[ 30.763] (II) intel(0): Year: 2010 Week: 0
[ 30.763] (II) intel(0): EDID Version: 1.3
[ 30.763] (II) intel(0): Digital Display Input
[ 30.763] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 30.763] (II) intel(0): Gamma: 2.20
[ 30.763] (II) intel(0): No DPMS capabilities specified
[ 30.763] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 30.763] (II) intel(0): First detailed timing is preferred mode
[ 30.763] (II) intel(0): redX: 0.590 redY: 0.345 greenX: 0.325 greenY: 0.540
[ 30.763] (II) intel(0): blueX: 0.150 blueY: 0.145 whiteX: 0.313 whiteY: 0.329
[ 30.763] (II) intel(0): Manufacturer's mask: 0
[ 30.763] (II) intel(0): Supported detailed timing:
[ 30.763] (II) intel(0): clock: 69.3 MHz Image Size: 293 x 164 mm
[ 30.763] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1456 h_border: 0
[ 30.763] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 793 v_border: 0
[ 30.763] (II) intel(0): Unknown vendor-specific block f
[ 30.763] (II) intel(0): AUO
[ 30.763] (II) intel(0): B133XW04 V0
[ 30.763] (II) intel(0): EDID (in hex):
[ 30.763] (II) intel(0): 00ffffffffffff0006af2c4000000000
[ 30.763] (II) intel(0): 00140103801d10780a15859758538a26
[ 30.763] (II) intel(0): 25505400000001010101010101010101
[ 30.763] (II) intel(0): 010101010101121b565a500019303020
[ 30.763] (II) intel(0): 360025a4100000180000000f00000000
[ 30.763] (II) intel(0): 00000000000000000020000000fe0041
[ 30.763] (II) intel(0): 554f0a202020202020202020000000fe
[ 30.763] (II) intel(0): 004231333358573034205630200a0056
[ 30.763] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 30.763] (II) intel(0): Printing DDC gathered Modelines:
[ 30.763] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 30.763] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 30.763] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 30.763] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 30.763] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 30.763] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 30.763] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 30.764] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 30.764] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 30.764] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 30.764] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 30.764] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 30.764] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 30.764] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 30.764] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 30.764] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 30.764] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 30.764] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 30.764] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 30.764] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 30.764] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 30.764] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 30.764] (II) intel(0): Printing probed modes for output LVDS1
[ 30.764] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 30.764] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 30.764] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 30.764] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 30.764] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 30.764] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 30.764] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 30.764] (II) intel(0): EDID for output VGA1
[ 30.764] (II) intel(0): Output LVDS1 connected
[ 30.764] (II) intel(0): Output VGA1 disconnected
[ 30.764] (II) intel(0): Using exact sizes for initial modes
[ 30.764] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 30.764] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 30.764] (II) intel(0): Kernel page flipping support detected, enabling
[ 30.764] (**) intel(0): Display dimensions: (290, 160) mm
[ 30.764] (**) intel(0): DPI set to (119, 121)
[ 30.764] (II) Loading sub module "fb"
[ 30.764] (II) LoadModule: "fb"
[ 30.764] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 30.764] (II) Module fb: vendor="X.Org Foundation"
[ 30.764] compiled for 1.10.4, module version = 1.0.0
[ 30.764] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.764] (II) Loading sub module "dri2"
[ 30.764] (II) LoadModule: "dri2"
[ 30.764] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.764] (II) Module dri2: vendor="X.Org Foundation"
[ 30.764] compiled for 1.10.4, module version = 1.2.0
[ 30.764] ABI class: X.Org Server Extension, version 5.0
[ 30.765] (==) Depth 24 pixmap format is 32 bpp
[ 30.765] (II) intel(0): [DRI2] Setup complete
[ 30.765] (II) intel(0): [DRI2] DRI driver: i965
[ 30.765] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 30.772] (II) UXA(0): Driver registered support for the following operations:
[ 30.772] (II) solid
[ 30.772] (II) copy
[ 30.772] (II) composite (RENDER acceleration)
[ 30.772] (II) put_image
[ 30.772] (II) get_image
[ 30.772] (==) intel(0): Backing store disabled
[ 30.772] (==) intel(0): Silken mouse enabled
[ 30.772] (II) intel(0): Initializing HW Cursor
[ 30.832] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 30.832] (==) intel(0): DPMS enabled
[ 30.832] (==) intel(0): Intel XvMC decoder enabled
[ 30.832] (II) intel(0): Set up textured video
[ 30.832] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 30.832] (II) intel(0): direct rendering: DRI2 Enabled
[ 30.832] (==) intel(0): hotplug detection: "enabled"
[ 30.832] (--) RandR disabled
[ 30.832] (II) Initializing built-in extension Generic Event Extension
[ 30.832] (II) Initializing built-in extension SHAPE
[ 30.832] (II) Initializing built-in extension MIT-SHM
[ 30.832] (II) Initializing built-in extension XInputExtension
[ 30.832] (II) Initializing built-in extension XTEST
[ 30.832] (II) Initializing built-in extension BIG-REQUESTS
[ 30.832] (II) Initializing built-in extension SYNC
[ 30.832] (II) Initializing built-in extension XKEYBOARD
[ 30.832] (II) Initializing built-in extension XC-MISC
[ 30.832] (II) Initializing built-in extension SECURITY
[ 30.832] (II) Initializing built-in extension XINERAMA
[ 30.832] (II) Initializing built-in extension XFIXES
[ 30.832] (II) Initializing built-in extension RENDER
[ 30.832] (II) Initializing built-in extension RANDR
[ 30.832] (II) Initializing built-in extension COMPOSITE
[ 30.832] (II) Initializing built-in extension DAMAGE
[ 30.832] (II) SELinux: Disabled on system
[ 30.841] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 30.841] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 30.841] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 30.841] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 30.841] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 30.841] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[ 30.841] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 30.841] (II) intel(0): Setting screen physical size to 361 x 203
[ 30.952] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 30.952] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.952] (II) LoadModule: "evdev"
[ 30.952] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.953] (II) Module evdev: vendor="X.Org Foundation"
[ 30.953] compiled for 1.10.3, module version = 2.6.0
[ 30.953] Module class: X.Org XInput Driver
[ 30.953] ABI class: X.Org XInput driver, version 12.2
[ 30.953] (II) Using input driver 'evdev' for 'Power Button'
[ 30.953] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.953] (**) Power Button: always reports core events
[ 30.953] (**) Power Button: Device: "/dev/input/event5"
[ 30.953] (--) Power Button: Found keys
[ 30.953] (II) Power Button: Configuring as keyboard
[ 30.953] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 30.953] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.953] (**) Option "xkb_rules" "evdev"
[ 30.953] (**) Option "xkb_model" "pc105"
[ 30.953] (**) Option "xkb_layout" "us"
[ 30.955] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 30.955] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.955] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.955] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.955] (**) Video Bus: always reports core events
[ 30.955] (**) Video Bus: Device: "/dev/input/event11"
[ 30.955] (--) Video Bus: Found keys
[ 30.955] (II) Video Bus: Configuring as keyboard
[ 30.955] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11/event11"
[ 30.955] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 30.955] (**) Option "xkb_rules" "evdev"
[ 30.955] (**) Option "xkb_model" "pc105"
[ 30.955] (**) Option "xkb_layout" "us"
[ 30.966] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 30.966] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.966] (II) Using input driver 'evdev' for 'Power Button'
[ 30.966] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.966] (**) Power Button: always reports core events
[ 30.966] (**) Power Button: Device: "/dev/input/event3"
[ 30.966] (--) Power Button: Found keys
[ 30.966] (II) Power Button: Configuring as keyboard
[ 30.966] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 30.966] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.966] (**) Option "xkb_rules" "evdev"
[ 30.966] (**) Option "xkb_model" "pc105"
[ 30.966] (**) Option "xkb_layout" "us"
[ 30.966] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 30.966] (II) No input driver/identifier specified (ignoring)
[ 30.966] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 30.966] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 30.966] (II) Using input driver 'evdev' for 'Sleep Button'
[ 30.966] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.967] (**) Sleep Button: always reports core events
[ 30.967] (**) Sleep Button: Device: "/dev/input/event4"
[ 30.967] (--) Sleep Button: Found keys
[ 30.967] (II) Sleep Button: Configuring as keyboard
[ 30.967] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[ 30.967] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 30.967] (**) Option "xkb_rules" "evdev"
[ 30.967] (**) Option "xkb_model" "pc105"
[ 30.967] (**) Option "xkb_layout" "us"
[ 30.969] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 30.969] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 30.969] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 30.969] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.970] (**) USB OPTICAL MOUSE: always reports core events
[ 30.970] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 30.970] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
[ 30.970] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
[ 30.970] (--) USB OPTICAL MOUSE: Found relative axes
[ 30.970] (--) USB OPTICAL MOUSE: Found x and y relative axes
[ 30.970] (II) USB OPTICAL MOUSE: Configuring as mouse
[ 30.970] (II) USB OPTICAL MOUSE: Adding scrollwheel support
[ 30.970] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 30.970] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.970] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1/event1"
[ 30.970] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE)
[ 30.970] (II) USB OPTICAL MOUSE: initialized for relative axes.
[ 30.970] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 30.970] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 30.970] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 30.970] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 30.971] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 30.971] (II) No input driver/identifier specified (ignoring)
[ 30.971] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 30.971] (II) No input driver/identifier specified (ignoring)
[ 30.972] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event13)
[ 30.972] (II) No input driver/identifier specified (ignoring)
[ 30.973] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event14)
[ 30.973] (II) No input driver/identifier specified (ignoring)
[ 30.975] (II) config/udev: Adding input device USB Gamepad (/dev/input/event6)
[ 30.975] (II) No input driver/identifier specified (ignoring)
[ 30.976] (II) config/udev: Adding input device USB Gamepad (/dev/input/js0)
[ 30.976] (II) No input driver/identifier specified (ignoring)
[ 30.976] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event10)
[ 30.976] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 30.976] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 30.976] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.977] (**) Lenovo EasyCamera: always reports core events
[ 30.977] (**) Lenovo EasyCamera: Device: "/dev/input/event10"
[ 30.977] (--) Lenovo EasyCamera: Found keys
[ 30.977] (II) Lenovo EasyCamera: Configuring as keyboard
[ 30.977] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input10/event10"
[ 30.977] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD)
[ 30.977] (**) Option "xkb_rules" "evdev"
[ 30.977] (**) Option "xkb_model" "pc105"
[ 30.977] (**) Option "xkb_layout" "us"
[ 30.981] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 30.981] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.981] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 30.981] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.981] (**) AT Translated Set 2 keyboard: always reports core events
[ 30.981] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 30.981] (--) AT Translated Set 2 keyboard: Found keys
[ 30.981] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 30.981] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 30.981] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 30.981] (**) Option "xkb_rules" "evdev"
[ 30.982] (**) Option "xkb_model" "pc105"
[ 30.982] (**) Option "xkb_layout" "us"
[ 30.982] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event9)
[ 30.982] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 30.982] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 30.982] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.982] (**) PS/2 Generic Mouse: always reports core events
[ 30.982] (**) PS/2 Generic Mouse: Device: "/dev/input/event9"
[ 30.982] (--) PS/2 Generic Mouse: Found 3 mouse buttons
[ 30.982] (--) PS/2 Generic Mouse: Found relative axes
[ 30.982] (--) PS/2 Generic Mouse: Found x and y relative axes
[ 30.982] (II) PS/2 Generic Mouse: Configuring as mouse
[ 30.982] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 30.982] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.982] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input9/event9"
[ 30.982] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
[ 30.982] (II) PS/2 Generic Mouse: initialized for relative axes.
[ 30.982] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 30.982] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 30.982] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 30.982] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 30.983] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[ 30.983] (II) No input driver/identifier specified (ignoring)
[ 30.983] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
[ 30.983] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 30.983] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[ 30.983] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.983] (**) Ideapad extra buttons: always reports core events
[ 30.983] (**) Ideapad extra buttons: Device: "/dev/input/event8"
[ 30.983] (--) Ideapad extra buttons: Found keys
[ 30.983] (II) Ideapad extra buttons: Configuring as keyboard
[ 30.983] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input8/event8"
[ 30.983] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD)
[ 30.983] (**) Option "xkb_rules" "evdev"
[ 30.983] (**) Option "xkb_model" "pc105"
[ 30.983] (**) Option "xkb_layout" "us"
[ 30.983] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 30.983] (II) No input driver/identifier specified (ignoring)
[ 30.986] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event15)
[ 30.986] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 30.986] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 30.986] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.986] (**) ACPI Virtual Keyboard Device: always reports core events
[ 30.986] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event15"
[ 30.986] (--) ACPI Virtual Keyboard Device: Found keys
[ 30.987] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[ 30.987] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event15"
[ 30.987] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
[ 30.987] (**) Option "xkb_rules" "evdev"
[ 30.987] (**) Option "xkb_model" "pc105"
[ 30.987] (**) Option "xkb_layout" "us"
[ 31.827] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 31.827] (II) intel(0): Printing DDC gathered Modelines:
[ 31.827] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 31.828] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 31.828] (II) intel(0): Printing DDC gathered Modelines:
[ 31.829] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 31.853] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 31.853] (II) intel(0): Printing DDC gathered Modelines:
[ 31.853] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 47.243] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 47.243] (II) intel(0): Printing DDC gathered Modelines:
[ 47.243] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 47.244] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 47.244] (II) intel(0): Printing DDC gathered Modelines:
[ 47.244] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 47.253] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 47.253] (II) intel(0): Printing DDC gathered Modelines:
[ 47.253] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 50.137] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 50.137] (II) intel(0): Printing DDC gathered Modelines:
[ 50.137] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Lenovo G360: ALPS Touchpad Recognized as "PS/2 Generic Mouse"(with newly dmesg information)
2012-07-06 3:39 Bug#679750: Lenovo G360: ALPS Touchpad Recognized as "PS/2 Generic Mouse"(with newly dmesg information) littlebat
@ 2012-07-06 5:11 ` Seth Forshee
2012-07-07 5:35 ` Bug#679750: " littlebat
0 siblings, 1 reply; 9+ messages in thread
From: Seth Forshee @ 2012-07-06 5:11 UTC (permalink / raw)
To: littlebat; +Cc: linux-input, 679750, jrnieder, rik.theys
[-- Attachment #1: Type: text/plain, Size: 2866 bytes --]
On Fri, Jul 06, 2012 at 11:39:42AM +0800, littlebat wrote:
> I found these lines in my dmesg information:
> [ 19.995850] psmouse serio4: alps: E6 report: 00 00 64
> [ 20.021288] psmouse serio4: alps: E7 report: 73 03 50
> [ 20.623609] input: PS/2 Generic Mouse
> as /devices/platform/i8042/serio4/input/input9
Thanks, this is the information we need to check whether or not your
touchpad uses any of the known ALPS protocols.
I'm attaching a patch to use as a starting point. Basically we're just
going to try each protocol version until either we find one that works
or run out of options. You should have an external mouse available,
because it's likely that your touchpad will not be usable. I've also
heard that some of the workarounds that people use to get the "disable
touchpad while typing" behavior can cause the touchpad to no longer
function once it starts behaving as a touchpad, so you should look out
for that as well.
I won't be able to respond further until next Monday, but it's pretty
simple to modify the driver to try different protocol versions so I'll
give you some instructions. The patch adds the following line. I've
identified the two fields you'll need to change.
{ { 0x73, 0x03, 0x50 }, 0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 },
^ ^
| |
command_mode_resp |
proto_version
Not surprisingly, to try different protocol versions you just need to
change the proto_version field. Try ALPS_PROTO_V4 first, if that doesn't
work try ALPS_PROTO_V3, etc., until you've tried them all or found one
that works.
The first time you run the patch though you need to be on the lookout
for a message in dmesg that says "Unknown command mode response"
followed by two hex digits. If you see this then you need to change
command_mode_resp to match the response printed in the message. Be sure
to leave the 0x characters in place; only replace the 8a characters.
Then try the same protocol version again.
The basic test procedure after booting with a test version of the driver
is:
1. Check dmesg for any errors from the alps driver. If you see anything
other than the "Unknown command mode response" message then it
probably means your touchpad doesn't use that protocol version, so
you should move on to the next one. If the device name isn't showing
up as something with ALPS in it, that also indicates your device
isn't using that version.
2. Thoroughly test the touchpad. You may see erratic behavior -- the
pointer jumping around, random clicks, etc -- which means it's using
a different protocol.
If you find a protocol version that works, let me know and I'll help get
it added to the driver. If you don't then there's not much more I can do
to help without hardware.
Seth
[-- Attachment #2: alps-test.patch --]
[-- Type: text/x-diff, Size: 691 bytes --]
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 4c6a72d..979339c 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -15,6 +15,8 @@
* the Free Software Foundation.
*/
+#define DEBUG
+
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/input/mt.h>
@@ -112,6 +114,7 @@ static const struct alps_model_info alps_model_data[] = {
{ { 0x73, 0x02, 0x64 }, 0x9b, ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT },
{ { 0x73, 0x02, 0x64 }, 0x9d, ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT },
{ { 0x73, 0x02, 0x64 }, 0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 },
+ { { 0x73, 0x03, 0x50 }, 0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 },
};
/*
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Bug#679750: Lenovo G360: ALPS Touchpad Recognized as "PS/2 Generic Mouse"(with newly dmesg information)
2012-07-06 5:11 ` Seth Forshee
@ 2012-07-07 5:35 ` littlebat
2012-07-09 14:45 ` Seth Forshee
0 siblings, 1 reply; 9+ messages in thread
From: littlebat @ 2012-07-07 5:35 UTC (permalink / raw)
To: Seth Forshee; +Cc: linux-input, 679750, jrnieder, rik.theys
[-- Attachment #1: Type: text/plain, Size: 5880 bytes --]
On Fri, 6 Jul 2012 00:11:41 -0500
Seth Forshee <seth.forshee@canonical.com> wrote:
> On Fri, Jul 06, 2012 at 11:39:42AM +0800, littlebat wrote:
> > I found these lines in my dmesg information:
> > [ 19.995850] psmouse serio4: alps: E6 report: 00 00 64
> > [ 20.021288] psmouse serio4: alps: E7 report: 73 03 50
> > [ 20.623609] input: PS/2 Generic Mouse
> > as /devices/platform/i8042/serio4/input/input9
>
> Thanks, this is the information we need to check whether or not your
> touchpad uses any of the known ALPS protocols.
>
> I'm attaching a patch to use as a starting point. Basically we're just
> going to try each protocol version until either we find one that works
> or run out of options. You should have an external mouse available,
> because it's likely that your touchpad will not be usable. I've also
> heard that some of the workarounds that people use to get the "disable
> touchpad while typing" behavior can cause the touchpad to no longer
> function once it starts behaving as a touchpad, so you should look out
> for that as well.
>
> I won't be able to respond further until next Monday, but it's pretty
> simple to modify the driver to try different protocol versions so I'll
> give you some instructions. The patch adds the following line. I've
> identified the two fields you'll need to change.
>
> { { 0x73, 0x03, 0x50 }, 0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 },
> ^ ^
> | |
> command_mode_resp |
> proto_version
>
> Not surprisingly, to try different protocol versions you just need to
> change the proto_version field. Try ALPS_PROTO_V4 first, if that
> doesn't work try ALPS_PROTO_V3, etc., until you've tried them all or
> found one that works.
>
> The first time you run the patch though you need to be on the lookout
> for a message in dmesg that says "Unknown command mode response"
> followed by two hex digits. If you see this then you need to change
> command_mode_resp to match the response printed in the message. Be
> sure to leave the 0x characters in place; only replace the 8a
> characters. Then try the same protocol version again.
>
> The basic test procedure after booting with a test version of the
> driver is:
>
> 1. Check dmesg for any errors from the alps driver. If you see
> anything other than the "Unknown command mode response" message then
> it probably means your touchpad doesn't use that protocol version, so
> you should move on to the next one. If the device name isn't
> showing up as something with ALPS in it, that also indicates your
> device isn't using that version.
>
> 2. Thoroughly test the touchpad. You may see erratic behavior -- the
> pointer jumping around, random clicks, etc -- which means it's
> using a different protocol.
>
> If you find a protocol version that works, let me know and I'll help
> get it added to the driver. If you don't then there's not much more I
> can do to help without hardware.
Thanks.
I have changed "proto_version" from V4 to V1, and changed
"command_mode_resp" to 0x73(followed by unknown response while entering
command mode: 73 01 0d) or 0x8a, 0x00, etc.. But, none of them works.
Briefly, "proto_version" V4 with "command_mode_resp" 0x00, 0x01, 0x73,
0x0d and V3 with 0x0d, 0x73, show the almost same symptoms:
1, dmesg output:
[ 19.105550] psmouse serio4: alps: E6 report: 00 00 64
[ 19.130028] psmouse serio4: alps: E7 report: 73 03 50
[ 19.149304] psmouse serio4: alps: unknown response while entering
command mode: 73 01 0d
[ 19.149311] psmouse serio4: alps: touchpad failed to enter command
mode
2, xinput --list shows it is a "PS/2 Generic Mouse"
3, No "touchpad" found in "Xorg.0.log" except "PS/2 Generic Mouse"
4, No touchpad tab in gnome mouse setting dialog.
Detail information see attachments, here is V4 with 0x73:
V4-73-dmesg.txt, V4-73-inputdevices.txt, V4-73-xinputlist.txt,
V4-73-Xorg.0.log
And, V2 or V1 with 0x8a or 0x00, show the almost same symptoms below:
1, dmesg output:
[ 19.935069] psmouse serio4: alps: E6 report: 00 00 64
[ 19.960457] psmouse serio4: alps: E7 report: 73 03 50
[ 20.000732] psmouse serio4: alps: Status: 10 00 0a
[ 20.026497] input: PS/2 Mouse
as /devices/platform/i8042/serio4/input/input9
[ 20.042797] input: AlpsPS/2 ALPS GlidePoint
as /devices/platform/i8042/serio4/input/input10
2, xinput --list shows there are "AlpsPS/2 ALPS GlidePoint" and "PS/2
Mouse"
3, Xorg.0.log shows:
[ 30.225] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
...
But,
[ 30.245] (EE) Query no Synaptics: 6003C8
[ 30.245] (--) AlpsPS/2 ALPS GlidePoint: no supported touchpad found
[ 30.245] (EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize
Synaptics hardware.
[ 30.257] (EE) PreInit returned 11 for "AlpsPS/2 ALPS GlidePoint"
4, There is touchpad tab in gnome mouse setting dialog, but the
functions of "edge scrolling" and "disable touchpad when typing" still
can't work even if I can setup them in touchpad tab in gnome mouse
setting dialog.
Detail information see attachments, here is V2 with 0x00:
V2-00-dmesg.txt, V2-00-inputdevices.txt, V2-00-xinputlist.txt,
V2-00-Xorg.0.log
I have also changed "command_mode_resp" and even the other fields I can
find in the alps.c, but no lucky. V4, V3 can't find the touchpad, V2,
V1 can find a touchpad but still can't work.
What's the next step can I do?
Thanks.
PS: I found linux-input@vger.kernel.org archived the posts at
http://www.spinics.net/lists/linux-input/ several hours later after
post even if I hadn't subscribed this mail list at that time. But, it
seems don't archived post with big size attachment(My previous post
"Lenovo G360: ALPS Touchpad Recognized as "PS/2 Generic Mouse"(with
newly dmesg information)" with 6 attachments hasn't been archived after
posting 24h later. )
[-- Attachment #2: V4-73-dmesg.txt --]
[-- Type: text/plain, Size: 51991 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.4debugpsmouse (mengdaxing@ldebian) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Fri Jul 6 07:44:49 CST 2012
[ 0.000000] Command line: root=/dev/sda7 acpi_backlight=vendor ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007727c000 (usable)
[ 0.000000] BIOS-e820: 000000007727c000 - 0000000077282000 (reserved)
[ 0.000000] BIOS-e820: 0000000077282000 - 00000000773ee000 (usable)
[ 0.000000] BIOS-e820: 00000000773ee000 - 000000007740f000 (reserved)
[ 0.000000] BIOS-e820: 000000007740f000 - 000000007746f000 (usable)
[ 0.000000] BIOS-e820: 000000007746f000 - 0000000077470000 (reserved)
[ 0.000000] BIOS-e820: 0000000077470000 - 00000000774f1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000774f1000 - 000000007770f000 (reserved)
[ 0.000000] BIOS-e820: 000000007770f000 - 0000000077717000 (usable)
[ 0.000000] BIOS-e820: 0000000077717000 - 000000007771f000 (reserved)
[ 0.000000] BIOS-e820: 000000007771f000 - 000000007775e000 (usable)
[ 0.000000] BIOS-e820: 000000007775e000 - 000000007779f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007779f000 - 00000000777e1000 (usable)
[ 0.000000] BIOS-e820: 00000000777e1000 - 00000000777ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000777ff000 - 0000000077800000 (usable)
[ 0.000000] BIOS-e820: 0000000077800000 - 000000007c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0804000 - 00000000f0805000 (reserved)
[ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO G360 /LL1 , BIOS 61CN06WW 10/27/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x77800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 078000000 mask FF8000000 uncachable
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f6200] f6200
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-0000000077800000
[ 0.000000] 0000000000 - 0077800000 page 2M
[ 0.000000] kernel direct mapping tables up to 77800000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 6fc5c000 - 7726c000
[ 0.000000] ACPI: RSDP 00000000000f60c0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000777f2fcb 0005C (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000777e3000 000F4 (v03 LENOVO CB-01 06040000 PTEC 00000001)
[ 0.000000] ACPI: DSDT 00000000777e4000 0BBBF (v02 LENOVO CB-01 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 000000007779bfc0 00040
[ 0.000000] ACPI: HPET 00000000777fed86 00038 (v01 LENOVO CB-01 06040000 PTEC 00000001)
[ 0.000000] ACPI: MCFG 00000000777fedbe 0003C (v01 LENOVO CB-01 06040000 PTEC 00000001)
[ 0.000000] ACPI: APIC 00000000777fedfa 00068 (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000777fee62 00028 (v01 LENOVO CB-01 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000777fee8a 00176 (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000777e2000 009F1 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000077800000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000077800000
[ 0.000000] NODE_DATA [00000000777dd000 - 00000000777e0fff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88006d600000-ffff88006f1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x0007727c
[ 0.000000] 0: 0x00077282 -> 0x000773ee
[ 0.000000] 0: 0x0007740f -> 0x0007746f
[ 0.000000] 0: 0x0007770f -> 0x00077717
[ 0.000000] 0: 0x0007771f -> 0x0007775e
[ 0.000000] 0: 0x0007779f -> 0x000777e1
[ 0.000000] 0: 0x000777ff -> 0x00077800
[ 0.000000] On node 0 totalpages: 488542
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3919 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6636 pages used for memmap
[ 0.000000] DMA32 zone: 477926 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007727c000 - 0000000077282000
[ 0.000000] PM: Registered nosave memory: 00000000773ee000 - 000000007740f000
[ 0.000000] PM: Registered nosave memory: 000000007746f000 - 0000000077470000
[ 0.000000] PM: Registered nosave memory: 0000000077470000 - 00000000774f1000
[ 0.000000] PM: Registered nosave memory: 00000000774f1000 - 000000007770f000
[ 0.000000] PM: Registered nosave memory: 0000000077717000 - 000000007771f000
[ 0.000000] PM: Registered nosave memory: 000000007775e000 - 000000007779f000
[ 0.000000] PM: Registered nosave memory: 00000000777e1000 - 00000000777ff000
[ 0.000000] Allocating PCI resources starting at 7c000000 (gap: 7c000000:64000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88006fa00000 s82304 r8192 d24192 u1048576
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 481845
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda7 acpi_backlight=vendor ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1795820k/1957888k available (3581k kernel code, 3720k absent, 158348k reserved, 3112k data, 604k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 7864320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2127.875 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4255.75 BogoMIPS (lpj=8511500)
[ 0.000151] pid_max: default: 32768 minimum: 301
[ 0.000262] Security Framework initialized
[ 0.000338] AppArmor: AppArmor disabled by boot time parameter
[ 0.000550] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001356] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.001763] Mount-cache hash table entries: 256
[ 0.002042] Initializing cgroup subsys cpuacct
[ 0.002115] Initializing cgroup subsys memory
[ 0.002198] Initializing cgroup subsys devices
[ 0.002270] Initializing cgroup subsys freezer
[ 0.002341] Initializing cgroup subsys net_cls
[ 0.002412] Initializing cgroup subsys blkio
[ 0.002488] Initializing cgroup subsys perf_event
[ 0.002586] CPU: Physical Processor ID: 0
[ 0.002657] CPU: Processor Core ID: 0
[ 0.002730] mce: CPU supports 9 MCE banks
[ 0.002810] CPU0: Thermal monitoring enabled (TM1)
[ 0.002889] using mwait in idle threads.
[ 0.003970] ACPI: Core revision 20120320
[ 0.023641] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063387] CPU0: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz stepping 05
[ 0.168637] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.168914] CPUID marked event: 'bus cycles' unavailable
[ 0.168993] ... version: 3
[ 0.169065] ... bit width: 48
[ 0.169138] ... generic registers: 4
[ 0.169212] ... value mask: 0000ffffffffffff
[ 0.169288] ... max period: 000000007fffffff
[ 0.169369] ... fixed-purpose events: 3
[ 0.169442] ... event mask: 000000070000000f
[ 0.169669] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.169864] Booting Node 0, Processors #1 Ok.
[ 0.180932] CPU1: Thermal monitoring handled by SMI
[ 0.183045] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.183167] Brought up 2 CPUs
[ 0.183237] Total of 2 processors activated (8511.50 BogoMIPS).
[ 0.184540] devtmpfs: initialized
[ 0.188736] PM: Registering ACPI NVS region [mem 0x77470000-0x774f0fff] (528384 bytes)
[ 0.188864] PM: Registering ACPI NVS region [mem 0x7775e000-0x7779efff] (266240 bytes)
[ 0.189079] dummy:
[ 0.189208] NET: Registered protocol family 16
[ 0.189408] ACPI: bus type pci registered
[ 0.189562] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.189673] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.234956] PCI: Using configuration type 1 for base access
[ 0.235661] bio: create slab <bio-0> at 0
[ 0.235826] ACPI: Added _OSI(Module Device)
[ 0.235905] ACPI: Added _OSI(Processor Device)
[ 0.235983] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.236060] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.237679] ACPI: EC: Look up EC in DSDT
[ 0.245777] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.246332] ACPI: SSDT 000000007771ac18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.246895] ACPI: Dynamic OEM Table Load:
[ 0.247058] ACPI: SSDT (null) 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.247431] ACPI: SSDT 0000000077718018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.250461] ACPI: Dynamic OEM Table Load:
[ 0.250619] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.251168] ACPI: SSDT 0000000077719a98 00303 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.251801] ACPI: Dynamic OEM Table Load:
[ 0.251962] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.252320] ACPI: SSDT 0000000077717d98 00119 (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.252897] ACPI: Dynamic OEM Table Load:
[ 0.253057] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.263407] ACPI: Interpreter enabled
[ 0.263483] ACPI: (supports S0 S3 S4 S5)
[ 0.263747] ACPI: Using IOAPIC for interrupt routing
[ 0.273151] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.273426] ACPI: No dock devices found.
[ 0.273505] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.274090] \_SB_.PCI0:_OSC invalid UUID
[ 0.274092] _OSC request data:1 8 1f
[ 0.274097] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.274921] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.275009] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.275090] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.275196] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.275300] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.275403] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.275509] pci_root PNP0A08:00: host bridge window [mem 0x7c000000-0xfeafffff]
[ 0.275649] PCI host bridge to bus 0000:00
[ 0.275724] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.275807] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.275889] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.275972] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.276056] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.276142] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.276228] pci_bus 0000:00: root bus resource [mem 0x7c000000-0xfeafffff]
[ 0.276319] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.276338] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.276463] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.276497] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.276512] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.276524] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.276531] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.276537] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.276619] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.276646] pci 0000:00:1a.0: reg 10: [mem 0xf0806000-0xf08063ff]
[ 0.276759] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.276795] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.276816] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
[ 0.276916] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.276948] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.277053] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.277086] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.277190] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.277226] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.277329] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.277372] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.277398] pci 0000:00:1d.0: reg 10: [mem 0xf0806400-0xf08067ff]
[ 0.277511] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.277541] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.277631] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.277767] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.277796] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
[ 0.277808] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
[ 0.277820] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
[ 0.277832] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
[ 0.277843] pci 0000:00:1f.2: reg 20: [io 0x1820-0x183f]
[ 0.277856] pci 0000:00:1f.2: reg 24: [mem 0xf0805000-0xf08057ff]
[ 0.277925] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.277952] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.277973] pci 0000:00:1f.3: reg 10: [mem 0xf0806800-0xf08068ff 64bit]
[ 0.278005] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
[ 0.278058] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.278087] pci 0000:00:1f.6: reg 10: [mem 0xf0804000-0xf0804fff 64bit]
[ 0.278237] pci 0000:01:00.0: [10de:0a70] type 00 class 0x030000
[ 0.278252] pci 0000:01:00.0: reg 10: [mem 0xac000000-0xacffffff]
[ 0.278269] pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.278285] pci 0000:01:00.0: reg 1c: [mem 0xae000000-0xafffffff 64bit pref]
[ 0.278297] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.278310] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.278407] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.278485] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.278488] pci 0000:00:01.0: bridge window [mem 0xac000000-0xadefffff]
[ 0.278492] pci 0000:00:01.0: bridge window [mem 0xae000000-0xbfffffff 64bit pref]
[ 0.278551] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.278734] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[ 0.278778] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf050ffff 64bit]
[ 0.278978] pci 0000:03:00.0: supports D1
[ 0.278980] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.279064] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.279150] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.279236] pci 0000:08:00.0: [1969:2060] type 00 class 0x020000
[ 0.279266] pci 0000:08:00.0: reg 10: [mem 0xf0400000-0xf043ffff 64bit]
[ 0.279282] pci 0000:08:00.0: reg 18: [io 0x3000-0x307f]
[ 0.279411] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.284612] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[ 0.284705] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.284711] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.284792] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
[ 0.284886] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.284889] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.284891] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.284894] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.284897] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.284899] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.284902] pci 0000:00:1e.0: bridge window [mem 0x7c000000-0xfeafffff] (subtractive decode)
[ 0.284932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.285202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.285280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.285447] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.285516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.285591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.285739] \_SB_.PCI0:_OSC invalid UUID
[ 0.285741] _OSC request data:1 1f 1f
[ 0.285745] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.285865] \_SB_.PCI0:_OSC invalid UUID
[ 0.285867] _OSC request data:1 0 1d
[ 0.285871] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.285975] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.292254] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.292407] PCI host bridge to bus 0000:ff
[ 0.292487] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.292509] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.292531] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.292551] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.292570] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.292594] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.292629] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.292709] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.292817] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.293151] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.293782] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.294473] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.295105] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.295738] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.296483] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.297237] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.297935] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.298617] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.298732] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.298840] vgaarb: loaded
[ 0.298909] vgaarb: bridge control possible 0000:01:00.0
[ 0.298989] vgaarb: no bridge control possible 0000:00:02.0
[ 0.299098] PCI: Using ACPI for IRQ routing
[ 0.309104] PCI: pci_cache_line_size set to 64 bytes
[ 0.309201] reserve RAM buffer: 000000000009c400 - 000000000009ffff
[ 0.309203] reserve RAM buffer: 000000007727c000 - 0000000077ffffff
[ 0.309209] reserve RAM buffer: 00000000773ee000 - 0000000077ffffff
[ 0.309214] reserve RAM buffer: 000000007746f000 - 0000000077ffffff
[ 0.309218] reserve RAM buffer: 0000000077717000 - 0000000077ffffff
[ 0.309222] reserve RAM buffer: 000000007775e000 - 0000000077ffffff
[ 0.309225] reserve RAM buffer: 00000000777e1000 - 0000000077ffffff
[ 0.309227] reserve RAM buffer: 0000000077800000 - 0000000077ffffff
[ 0.309364] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.309825] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.311923] Switching to clocksource hpet
[ 0.313813] pnp: PnP ACPI init
[ 0.313908] ACPI: bus type pnp registered
[ 0.314386] pnp 00:00: [bus 00-fe]
[ 0.314389] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.314391] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.314393] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.314396] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.314398] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.314400] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.314402] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.314406] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.314408] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.314410] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.314412] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.314415] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.314417] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.314419] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.314421] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.314423] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.314425] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.314427] pnp 00:00: [mem 0x7c000000-0xfeafffff window]
[ 0.314429] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.314486] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.314593] pnp 00:01: [io 0x0000-0x001f]
[ 0.314596] pnp 00:01: [io 0x0081-0x0091]
[ 0.314598] pnp 00:01: [io 0x0093-0x009f]
[ 0.314600] pnp 00:01: [io 0x00c0-0x00df]
[ 0.314602] pnp 00:01: [dma 4]
[ 0.314636] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.314646] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.314678] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.314767] pnp 00:03: [irq 0 disabled]
[ 0.314780] pnp 00:03: [irq 8]
[ 0.314782] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.314821] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.314832] pnp 00:04: [io 0x00f0]
[ 0.314838] pnp 00:04: [irq 13]
[ 0.314871] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.314884] pnp 00:05: [io 0x002e-0x002f]
[ 0.314886] pnp 00:05: [io 0x004e-0x004f]
[ 0.314888] pnp 00:05: [io 0x0061]
[ 0.314889] pnp 00:05: [io 0x0063]
[ 0.314891] pnp 00:05: [io 0x0065]
[ 0.314893] pnp 00:05: [io 0x0067]
[ 0.314895] pnp 00:05: [io 0x0070]
[ 0.314898] pnp 00:05: [io 0x0080]
[ 0.314900] pnp 00:05: [io 0x0092]
[ 0.314902] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.314904] pnp 00:05: [io 0x0680-0x069f]
[ 0.314905] pnp 00:05: [io 0x0500-0x050f]
[ 0.314907] pnp 00:05: [io 0x0600-0x0603]
[ 0.314909] pnp 00:05: [io 0xffff]
[ 0.314911] pnp 00:05: [io 0x0400-0x047f]
[ 0.314913] pnp 00:05: [io 0x1180-0x11ff]
[ 0.314915] pnp 00:05: [io 0x164e-0x164f]
[ 0.314916] pnp 00:05: [io 0xfe00]
[ 0.314918] pnp 00:05: [io 0x0068]
[ 0.314920] pnp 00:05: [io 0x006c]
[ 0.314922] pnp 00:05: [io 0x0700-0x070f]
[ 0.314985] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.315068] system 00:05: [io 0x0500-0x050f] has been reserved
[ 0.315148] system 00:05: [io 0x0600-0x0603] has been reserved
[ 0.315227] system 00:05: [io 0xffff] has been reserved
[ 0.315305] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.315385] system 00:05: [io 0x1180-0x11ff] has been reserved
[ 0.315467] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.315549] system 00:05: [io 0xfe00] has been reserved
[ 0.315631] system 00:05: [io 0x0700-0x070f] has been reserved
[ 0.315715] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.315754] pnp 00:06: [io 0x06a0-0x06af]
[ 0.315756] pnp 00:06: [io 0x06b0-0x06ff]
[ 0.315807] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.315888] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.315969] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.316019] pnp 00:07: [io 0x0070-0x0077]
[ 0.316058] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.316090] pnp 00:08: [io 0x0060]
[ 0.316092] pnp 00:08: [io 0x0064]
[ 0.316098] pnp 00:08: [irq 1]
[ 0.316135] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.316149] pnp 00:09: [irq 12]
[ 0.316183] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.316479] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.316482] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[ 0.316484] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.316486] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.316489] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.316491] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.316493] pnp 00:0a: [mem 0xfeaff000-0xfeafffff]
[ 0.316496] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.316499] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[ 0.316501] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.316503] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.316505] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.316507] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.316572] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.316655] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.316736] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.316819] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.316904] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.316986] system 00:0a: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.317068] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.317151] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.317235] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.317319] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.317402] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.317485] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.317672] pnp 00:0b: [bus ff]
[ 0.317715] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.318045] pnp: PnP ACPI: found 12 devices
[ 0.318123] ACPI: ACPI bus type pnp unregistered
[ 0.325222] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
[ 0.325227] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
[ 0.325230] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000
[ 0.325242] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000
[ 0.325246] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 0.325259] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08-08] add_size 200000
[ 0.325277] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.325280] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.325283] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.325286] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.325289] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.325291] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.325297] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7c000000-0x7c1fffff]
[ 0.325381] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7c200000-0x7c3fffff 64bit pref]
[ 0.325489] pci 0000:00:1c.1: BAR 15: assigned [mem 0x7c400000-0x7c5fffff 64bit pref]
[ 0.325594] pci 0000:00:1c.4: BAR 15: assigned [mem 0x7c600000-0x7c7fffff 64bit pref]
[ 0.325702] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.325784] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.325869] pci 0000:01:00.0: BAR 6: assigned [mem 0xad000000-0xad07ffff pref]
[ 0.325974] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.326051] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.326134] pci 0000:00:01.0: bridge window [mem 0xac000000-0xadefffff]
[ 0.326218] pci 0000:00:01.0: bridge window [mem 0xae000000-0xbfffffff 64bit pref]
[ 0.326325] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.326406] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.326492] pci 0000:00:1c.0: bridge window [mem 0x7c000000-0x7c1fffff]
[ 0.326577] pci 0000:00:1c.0: bridge window [mem 0x7c200000-0x7c3fffff 64bit pref]
[ 0.326687] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.326767] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.326854] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.326940] pci 0000:00:1c.1: bridge window [mem 0x7c400000-0x7c5fffff 64bit pref]
[ 0.327051] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[ 0.327133] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.327218] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.327307] pci 0000:00:1c.4: bridge window [mem 0x7c600000-0x7c7fffff 64bit pref]
[ 0.327416] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[ 0.327546] pci 0000:00:1e.0: setting latency timer to 64
[ 0.327550] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.327553] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.327555] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.327557] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.327560] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.327562] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.327564] pci_bus 0000:00: resource 10 [mem 0x7c000000-0xfeafffff]
[ 0.327567] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.327569] pci_bus 0000:01: resource 1 [mem 0xac000000-0xadefffff]
[ 0.327571] pci_bus 0000:01: resource 2 [mem 0xae000000-0xbfffffff 64bit pref]
[ 0.327573] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.327576] pci_bus 0000:02: resource 1 [mem 0x7c000000-0x7c1fffff]
[ 0.327578] pci_bus 0000:02: resource 2 [mem 0x7c200000-0x7c3fffff 64bit pref]
[ 0.327580] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.327583] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.327585] pci_bus 0000:03: resource 2 [mem 0x7c400000-0x7c5fffff 64bit pref]
[ 0.327587] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
[ 0.327589] pci_bus 0000:08: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.327592] pci_bus 0000:08: resource 2 [mem 0x7c600000-0x7c7fffff 64bit pref]
[ 0.327594] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.327596] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 0.327599] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.327601] pci_bus 0000:0a: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.327603] pci_bus 0000:0a: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.327605] pci_bus 0000:0a: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.327608] pci_bus 0000:0a: resource 10 [mem 0x7c000000-0xfeafffff]
[ 0.327676] NET: Registered protocol family 2
[ 0.327847] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.328425] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.329808] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.330216] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.330298] TCP: reno registered
[ 0.330374] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.330468] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.330674] NET: Registered protocol family 1
[ 0.330770] pci 0000:00:02.0: Boot video device
[ 0.330926] PCI: CLS 64 bytes, default 64
[ 0.330978] Unpacking initramfs...
[ 3.241872] Freeing initrd memory: 120896k freed
[ 3.269558] Simple Boot Flag at 0x36 set to 0x1
[ 3.270132] audit: initializing netlink socket (disabled)
[ 3.270224] type=2000 audit(1341652373.152:1): initialized
[ 3.284521] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.285086] VFS: Disk quotas dquot_6.5.2
[ 3.285186] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.285348] msgmni has been set to 3743
[ 3.285586] alg: No test for stdrng (krng)
[ 3.285690] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.285795] io scheduler noop registered
[ 3.285868] io scheduler deadline registered
[ 3.285954] io scheduler cfq registered (default)
[ 3.286145] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 3.286366] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.286463] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.286545] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.287073] intel_idle: MWAIT substates: 0x120
[ 3.287075] intel_idle: v0.4 model 0x25
[ 3.287076] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.287115] GHES: HEST is not enabled!
[ 3.287249] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.287846] Linux agpgart interface v0.103
[ 3.287993] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 3.288189] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 3.289128] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 3.289357] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.289557] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.292912] i8042: Detected active multiplexing controller, rev 1.1
[ 3.294680] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.297259] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.297364] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.297461] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.297560] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.297750] mousedev: PS/2 mouse device common for all mice
[ 3.297880] rtc_cmos 00:07: RTC can wake from S4
[ 3.298095] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.298207] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.298329] cpuidle: using governor ladder
[ 3.298441] cpuidle: using governor menu
[ 3.298638] TCP: cubic registered
[ 3.298794] NET: Registered protocol family 10
[ 3.299140] Mobile IPv6
[ 3.299212] NET: Registered protocol family 17
[ 3.299288] Registering the dns_resolver key type
[ 3.300109] PM: Hibernation image not present or could not be loaded.
[ 3.300135] registered taskstats version 1
[ 3.300959] rtc_cmos 00:07: setting system clock to 2012-07-07 09:12:53 UTC (1341652373)
[ 3.301273] Initializing network drop monitor service
[ 3.315477] Freeing unused kernel memory: 604k freed
[ 3.315644] Write protecting the kernel read-only data: 6144k
[ 3.317701] Freeing unused kernel memory: 496k freed
[ 3.320521] Freeing unused kernel memory: 720k freed
[ 3.343592] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.451144] udev[54]: starting version 164
[ 3.468043] usbcore: registered new interface driver usbfs
[ 3.468148] usbcore: registered new interface driver hub
[ 3.468975] usbcore: registered new device driver usb
[ 3.469904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.470035] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.470040] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.470140] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.470271] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.474318] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.474344] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0806000
[ 3.482878] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.483010] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.483092] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.483197] usb usb1: Product: EHCI Host Controller
[ 3.483274] usb usb1: Manufacturer: Linux 3.4.4debugpsmouse ehci_hcd
[ 3.483357] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.483606] hub 1-0:1.0: USB hub found
[ 3.483683] hub 1-0:1.0: 3 ports detected
[ 3.483885] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.483889] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.483981] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.484114] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.488201] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.510396] SCSI subsystem initialized
[ 3.523678] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0806400
[ 3.530705] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.530819] ACPI: Thermal Zone [TZ00] (56 C)
[ 3.534765] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.534879] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.534963] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.535068] usb usb2: Product: EHCI Host Controller
[ 3.535147] usb usb2: Manufacturer: Linux 3.4.4debugpsmouse ehci_hcd
[ 3.535230] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.535415] hub 2-0:1.0: USB hub found
[ 3.535564] hub 2-0:1.0: 3 ports detected
[ 3.537996] libata version 3.00 loaded.
[ 3.539215] ahci 0000:00:1f.2: version 3.0
[ 3.539293] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 3.539335] ahci: SSS flag set, parallel bus scan disabled
[ 3.539462] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x32 impl SATA mode
[ 3.539573] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 3.539688] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.555316] scsi0 : ahci
[ 3.555626] scsi1 : ahci
[ 3.555871] scsi2 : ahci
[ 3.556099] scsi3 : ahci
[ 3.556333] scsi4 : ahci
[ 3.556564] scsi5 : ahci
[ 3.556752] ata1: DUMMY
[ 3.556833] ata2: SATA max UDMA/133 abar m2048@0xf0805000 port 0xf0805180 irq 41
[ 3.556950] ata3: DUMMY
[ 3.557027] ata4: DUMMY
[ 3.557108] ata5: SATA max UDMA/133 abar m2048@0xf0805000 port 0xf0805300 irq 41
[ 3.557226] ata6: SATA max UDMA/133 abar m2048@0xf0805000 port 0xf0805380 irq 41
[ 3.615140] atl1c 0000:08:00.0: version 1.0.1.0-NAPI
[ 3.794599] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.874565] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.926954] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 3.927079] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.927520] hub 1-1:1.0: USB hub found
[ 3.927792] hub 1-1:1.0: 6 ports detected
[ 3.927939] ata2.00: ATA-8: TOSHIBA MK3265GSX, GJ205E, max UDMA/100
[ 3.928031] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.929050] ata2.00: configured for UDMA/100
[ 3.929254] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK3265GS GJ20 PQ: 0 ANSI: 5
[ 4.038487] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 4.170850] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 4.170942] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.171423] hub 2-1:1.0: USB hub found
[ 4.171543] hub 2-1:1.0: 8 ports detected
[ 4.242584] usb 1-1.1: new low-speed USB device number 3 using ehci_hcd
[ 4.246403] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.249441] ata5.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
[ 4.255602] ata5.00: configured for UDMA/100
[ 4.263232] scsi 4:0:0:0: CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
[ 4.266381] Refined TSC clocksource calibration: 2127.999 MHz.
[ 4.266472] Switching to clocksource tsc
[ 4.338013] usb 1-1.1: New USB device found, idVendor=15d9, idProduct=0a4f
[ 4.338105] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.338217] usb 1-1.1: Product: USB OPTICAL MOUSE
[ 4.442517] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[ 4.537679] usb 2-1.2: New USB device found, idVendor=0079, idProduct=0011
[ 4.537773] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4.537885] usb 2-1.2: Product: USB Gamepad
[ 4.544716] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
[ 4.545029] generic-usb 0003:15D9:0A4F.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.1/input0
[ 4.545270] usbcore: registered new interface driver usbhid
[ 4.545354] usbhid: USB HID core driver
[ 4.582256] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.589356] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4.589530] sd 1:0:0:0: [sda] Write Protect is off
[ 4.589617] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.589747] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.594844] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.594958] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.595268] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.610415] usb 2-1.4: new high-speed USB device number 4 using ehci_hcd
[ 4.717040] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[ 4.717202] usb 2-1.4: New USB device found, idVendor=5986, idProduct=0294
[ 4.717292] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.717402] usb 2-1.4: Product: Lenovo EasyCamera
[ 4.717485] usb 2-1.4: Manufacturer: Bison Corp.
[ 4.718250] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.722416] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 4.722618] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 5.504801] nbd: registered device at major 43
[ 5.520919] device-mapper: uevent: version 1.0.3
[ 5.521086] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 5.670530] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 17.628561] udev[413]: starting version 164
[ 17.878652] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 17.879234] ACPI: Lid Switch [LID]
[ 17.879369] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 17.879478] ACPI: Power Button [PWRB]
[ 17.879591] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 17.879702] ACPI: Sleep Button [SLPB]
[ 17.879818] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 17.879927] ACPI: Power Button [PWRF]
[ 18.087536] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 18.099301] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 18.102059] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 18.193981] ACPI: Requesting acpi_cpufreq
[ 18.281028] intel ips 0000:00:1f.6: No CPUID match found.
[ 18.281110] intel ips 0000:00:1f.6: IPS not supported on this CPU
[ 18.516890] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 18.517123] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.527739] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 18.543968] input: USB Gamepad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input7
[ 18.544207] dragonrise 0003:0079:0011.0002: input,hidraw1: USB HID v1.10 Joystick [USB Gamepad ] on usb-0000:00:1d.0-1.2/input0
[ 18.625237] Linux media interface: v0.10
[ 18.874696] Linux video capture interface: v2.00
[ 18.986451] ACPI: Battery Slot [BAT1] (battery present)
[ 18.989490] ACPI: AC Adapter [ACAD] (on-line)
[ 18.994811] wmi: Mapper loaded
[ 19.062711] cfg80211: Calling CRDA to update world regulatory domain
[ 19.105550] psmouse serio4: alps: E6 report: 00 00 64
[ 19.130028] psmouse serio4: alps: E7 report: 73 03 50
[ 19.149304] psmouse serio4: alps: unknown response while entering command mode: 73 01 0d
[ 19.149311] psmouse serio4: alps: touchpad failed to enter command mode
[ 19.324387] input: Ideapad extra buttons as /devices/platform/ideapad/input/input8
[ 19.607328] [drm] Initialized drm 1.1.0 20060810
[ 19.665378] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0294)
[ 19.667566] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input9
[ 19.667738] usbcore: registered new interface driver uvcvideo
[ 19.667822] USB Video Class driver (1.1.1)
[ 19.772454] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input10
[ 21.049809] i915 0000:00:02.0: setting latency timer to 64
[ 21.103551] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 21.103563] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 21.103652] [drm] Driver supports precise vblank timestamp query.
[ 21.103813] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 21.103919] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 21.104027] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 21.510193] fbcon: inteldrmfb (fb0) is primary device
[ 21.619734] ath: EEPROM regdomain: 0x65
[ 21.619738] ath: EEPROM indicates we should expect a direct regpair map
[ 21.619743] ath: Country alpha2 being used: 00
[ 21.619746] ath: Regpair used: 0x65
[ 21.656989] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 21.657322] Registered led device: ath9k-phy0
[ 21.657329] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90010920000, irq=17
[ 21.790523] Console: switching to colour frame buffer device 170x48
[ 21.798030] fb0: inteldrmfb frame buffer device
[ 21.798033] drm: registered panic notifier
[ 21.798420] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20120320/video-1147)
[ 21.798474] video: probe of LNXVIDEO:00 failed with error 5
[ 21.801070] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
[ 21.801253] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 21.801528] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 21.801680] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 21.873287] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[ 21.877417] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 21.877670] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 22.105384] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 22.170023] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 22.300074] loop: module loaded
[ 23.694904] fuse init (API version 7.18)
[ 24.305189] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.894367] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[ 26.861883] atl1c 0000:08:00.0: irq 44 for MSI/MSI-X
[ 27.882839] Clocksource tsc unstable (delta = -126514396 ns)
[ 27.884078] Switching to clocksource hpet
[ 28.224284] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.610345] sshd (1643): /proc/1643/oom_adj is deprecated, please use /proc/1643/oom_score_adj instead.
[ 54.585466] wlan0: authenticate with ec:17:2f:2f:e9:b6
[ 54.598924] wlan0: send auth to ec:17:2f:2f:e9:b6 (try 1/3)
[ 54.602121] wlan0: authenticated
[ 54.609165] wlan0: associate with ec:17:2f:2f:e9:b6 (try 1/3)
[ 54.613379] wlan0: RX AssocResp from ec:17:2f:2f:e9:b6 (capab=0x431 status=0 aid=1)
[ 54.613384] wlan0: associated
[ 54.620466] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[-- Attachment #3: V4-73-inputdevices.txt --]
[-- Type: text/plain, Size: 4000 bytes --]
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0003 Vendor=15d9 Product=0a4f Version=0111
N: Name=" USB OPTICAL MOUSE"
P: Phys=usb-0000:00:1a.0-1.1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
U: Uniq=
H: Handlers=mouse0 event1
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=103
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event2
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=3
B: KEY=4000 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input6
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0003 Vendor=0079 Product=0011 Version=0110
N: Name="USB Gamepad "
P: Phys=usb-0000:00:1d.0-1.2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input7
U: Uniq=
H: Handlers=event7 js0
B: PROP=0
B: EV=1b
B: KEY=3ff00000000 0 0 0 0
B: ABS=3
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Ideapad extra buttons"
P: Phys=ideapad/input0
S: Sysfs=/devices/platform/ideapad/input/input8
U: Uniq=
H: Handlers=kbd rfkill event8
B: PROP=0
B: EV=13
B: KEY=1400800000000 300000 0 0
B: MSC=10
I: Bus=0003 Vendor=5986 Product=0294 Version=1403
N: Name="Lenovo EasyCamera"
P: Phys=usb-0000:00:1d.0-1.4/button
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input9
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio4/input0
S: Sysfs=/devices/platform/i8042/serio4/input/input10
U: Uniq=
H: Handlers=mouse1 event10
B: PROP=0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
U: Uniq=
H: Handlers=kbd event11
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0001 Vendor=10ec Product=0272 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/input/input12
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
U: Uniq=
H: Handlers=event13
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
U: Uniq=
H: Handlers=event14
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0003 Vendor=0000 Product=0000 Version=0004
N: Name="ACPI Virtual Keyboard Device"
P: Phys=
S: Sysfs=/devices/virtual/input/input15
U: Uniq=
H: Handlers=sysrq kbd rfkill event15
B: PROP=0
B: EV=3
B: KEY=ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe
[-- Attachment #4: V4-73-xinputlist.txt --]
[-- Type: text/plain, Size: 4039 bytes --]
⎡ Virtual core pointer id=2 [master pointer (3)]
Reporting 3 classes:
Class originated from: 13
Buttons supported: 10
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right None None None
Button state:
Class originated from: 13
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
Class originated from: 13
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 4
Buttons supported: 10
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right None None None
Button state:
Class originated from: 4
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 4
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
⎜ ↳ USB OPTICAL MOUSE id=10 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 10
Buttons supported: 7
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right
Button state:
Class originated from: 10
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
Class originated from: 10
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
⎜ ↳ PS/2 Generic Mouse id=13 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 13
Buttons supported: 5
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down
Button state:
Class originated from: 13
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
Class originated from: 13
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
⎣ Virtual core keyboard id=3 [master keyboard (2)]
Reporting 1 classes:
Class originated from: 12
Keycodes supported: 248
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 5
Keycodes supported: 248
↳ Power Button id=6 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 6
Keycodes supported: 248
↳ Video Bus id=7 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 7
Keycodes supported: 248
↳ Power Button id=8 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 8
Keycodes supported: 248
↳ Sleep Button id=9 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 9
Keycodes supported: 248
↳ Lenovo EasyCamera id=11 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 11
Keycodes supported: 248
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 12
Keycodes supported: 248
↳ Ideapad extra buttons id=14 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 14
Keycodes supported: 248
↳ ACPI Virtual Keyboard Device id=15 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 15
Keycodes supported: 248
[-- Attachment #5: V4-73-Xorg.0.log --]
[-- Type: application/octet-stream, Size: 30392 bytes --]
[ 30.146]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 30.146] X Protocol Version 11, Revision 0
[ 30.146] Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian
[ 30.146] Current Operating System: Linux ldebian 3.4.4debugpsmouse #1 SMP Fri Jul 6 07:44:49 CST 2012 x86_64
[ 30.146] Kernel command line: root=/dev/sda7 acpi_backlight=vendor ro
[ 30.146] Build Date: 28 August 2011 09:39:43PM
[ 30.146] xorg-server 2:1.10.4-1~bpo60+1 (Cyril Brulebois <kibi@debian.org>)
[ 30.146] Current version of pixman: 0.24.0
[ 30.146] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 30.146] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.146] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 7 09:13:20 2012
[ 30.166] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 30.166] (==) No Layout section. Using the first Screen section.
[ 30.166] (==) No screen section available. Using defaults.
[ 30.166] (**) |-->Screen "Default Screen Section" (0)
[ 30.166] (**) | |-->Monitor "<default monitor>"
[ 30.166] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 30.166] (==) Automatically adding devices
[ 30.166] (==) Automatically enabling devices
[ 30.166] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 30.166] Entry deleted from font path.
[ 30.166] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 30.166] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 30.166] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 30.166] (II) Loader magic: 0x7d3ae0
[ 30.166] (II) Module ABI versions:
[ 30.166] X.Org ANSI C Emulation: 0.4
[ 30.166] X.Org Video Driver: 10.0
[ 30.166] X.Org XInput driver : 12.2
[ 30.166] X.Org Server Extension : 5.0
[ 30.167] (--) PCI:*(0:0:2:0) 8086:0046:17aa:3920 rev 24, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 30.167] (--) PCI: (0:1:0:0) 10de:0a70:17aa:3968 rev 162, Mem @ 0xac000000/16777216, 0xb0000000/268435456, 0xae000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 30.167] (II) Open ACPI successful (/var/run/acpid.socket)
[ 30.167] (II) LoadModule: "extmod"
[ 30.196] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 30.196] (II) Module extmod: vendor="X.Org Foundation"
[ 30.196] compiled for 1.10.4, module version = 1.0.0
[ 30.196] Module class: X.Org Server Extension
[ 30.196] ABI class: X.Org Server Extension, version 5.0
[ 30.196] (II) Loading extension SELinux
[ 30.196] (II) Loading extension MIT-SCREEN-SAVER
[ 30.196] (II) Loading extension XFree86-VidModeExtension
[ 30.196] (II) Loading extension XFree86-DGA
[ 30.196] (II) Loading extension DPMS
[ 30.196] (II) Loading extension XVideo
[ 30.196] (II) Loading extension XVideo-MotionCompensation
[ 30.196] (II) Loading extension X-Resource
[ 30.196] (II) LoadModule: "dbe"
[ 30.196] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 30.197] (II) Module dbe: vendor="X.Org Foundation"
[ 30.197] compiled for 1.10.4, module version = 1.0.0
[ 30.197] Module class: X.Org Server Extension
[ 30.197] ABI class: X.Org Server Extension, version 5.0
[ 30.197] (II) Loading extension DOUBLE-BUFFER
[ 30.197] (II) LoadModule: "glx"
[ 30.197] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 30.197] (II) Module glx: vendor="X.Org Foundation"
[ 30.197] compiled for 1.10.4, module version = 1.0.0
[ 30.197] ABI class: X.Org Server Extension, version 5.0
[ 30.197] (==) AIGLX enabled
[ 30.197] (II) Loading extension GLX
[ 30.197] (II) LoadModule: "record"
[ 30.197] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 30.197] (II) Module record: vendor="X.Org Foundation"
[ 30.197] compiled for 1.10.4, module version = 1.13.0
[ 30.197] Module class: X.Org Server Extension
[ 30.197] ABI class: X.Org Server Extension, version 5.0
[ 30.197] (II) Loading extension RECORD
[ 30.197] (II) LoadModule: "dri"
[ 30.197] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 30.197] (II) Module dri: vendor="X.Org Foundation"
[ 30.197] compiled for 1.10.4, module version = 1.0.0
[ 30.198] ABI class: X.Org Server Extension, version 5.0
[ 30.198] (II) Loading extension XFree86-DRI
[ 30.198] (II) LoadModule: "dri2"
[ 30.198] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.198] (II) Module dri2: vendor="X.Org Foundation"
[ 30.198] compiled for 1.10.4, module version = 1.2.0
[ 30.198] ABI class: X.Org Server Extension, version 5.0
[ 30.198] (II) Loading extension DRI2
[ 30.198] (==) Matched intel as autoconfigured driver 0
[ 30.198] (==) Matched vesa as autoconfigured driver 1
[ 30.198] (==) Matched fbdev as autoconfigured driver 2
[ 30.198] (==) Assigned the driver to the xf86ConfigLayout
[ 30.198] (II) LoadModule: "intel"
[ 30.198] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 30.198] (II) Module intel: vendor="X.Org Foundation"
[ 30.198] compiled for 1.10.4, module version = 2.15.0
[ 30.198] Module class: X.Org Video Driver
[ 30.198] ABI class: X.Org Video Driver, version 10.0
[ 30.198] (II) LoadModule: "vesa"
[ 30.198] (WW) Warning, couldn't open module vesa
[ 30.198] (II) UnloadModule: "vesa"
[ 30.198] (II) Unloading vesa
[ 30.198] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 30.198] (II) LoadModule: "fbdev"
[ 30.199] (WW) Warning, couldn't open module fbdev
[ 30.199] (II) UnloadModule: "fbdev"
[ 30.199] (II) Unloading fbdev
[ 30.199] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 30.199] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 30.199] (++) using VT number 7
[ 30.207] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 30.207] drmOpenDevice: node name is /dev/dri/card0
[ 30.207] drmOpenDevice: open result is 9, (OK)
[ 30.207] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 30.207] drmOpenDevice: node name is /dev/dri/card0
[ 30.207] drmOpenDevice: open result is 9, (OK)
[ 30.207] drmOpenByBusid: drmOpenMinor returns 9
[ 30.207] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 30.207] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 30.207] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 30.207] (==) intel(0): RGB weight 888
[ 30.207] (==) intel(0): Default visual is TrueColor
[ 30.207] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 30.207] (--) intel(0): Chipset: "Arrandale"
[ 30.207] (**) intel(0): Relaxed fencing enabled
[ 30.207] (**) intel(0): Framebuffer tiled
[ 30.207] (**) intel(0): Pixmaps tiled
[ 30.207] (**) intel(0): 3D buffers tiled
[ 30.207] (**) intel(0): SwapBuffers wait enabled
[ 30.207] (==) intel(0): video overlay key set to 0x101fe
[ 30.207] (II) intel(0): Output LVDS1 has no monitor section
[ 30.208] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[ 30.208] (II) intel(0): Output VGA1 has no monitor section
[ 30.208] (II) intel(0): EDID for output LVDS1
[ 30.208] (II) intel(0): Manufacturer: AUO Model: 402c Serial#: 0
[ 30.208] (II) intel(0): Year: 2010 Week: 0
[ 30.208] (II) intel(0): EDID Version: 1.3
[ 30.208] (II) intel(0): Digital Display Input
[ 30.208] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 30.208] (II) intel(0): Gamma: 2.20
[ 30.208] (II) intel(0): No DPMS capabilities specified
[ 30.208] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 30.208] (II) intel(0): First detailed timing is preferred mode
[ 30.208] (II) intel(0): redX: 0.590 redY: 0.345 greenX: 0.325 greenY: 0.540
[ 30.208] (II) intel(0): blueX: 0.150 blueY: 0.145 whiteX: 0.313 whiteY: 0.329
[ 30.208] (II) intel(0): Manufacturer's mask: 0
[ 30.208] (II) intel(0): Supported detailed timing:
[ 30.208] (II) intel(0): clock: 69.3 MHz Image Size: 293 x 164 mm
[ 30.208] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1456 h_border: 0
[ 30.208] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 793 v_border: 0
[ 30.208] (II) intel(0): Unknown vendor-specific block f
[ 30.208] (II) intel(0): AUO
[ 30.208] (II) intel(0): B133XW04 V0
[ 30.208] (II) intel(0): EDID (in hex):
[ 30.208] (II) intel(0): 00ffffffffffff0006af2c4000000000
[ 30.208] (II) intel(0): 00140103801d10780a15859758538a26
[ 30.208] (II) intel(0): 25505400000001010101010101010101
[ 30.208] (II) intel(0): 010101010101121b565a500019303020
[ 30.208] (II) intel(0): 360025a4100000180000000f00000000
[ 30.208] (II) intel(0): 00000000000000000020000000fe0041
[ 30.208] (II) intel(0): 554f0a202020202020202020000000fe
[ 30.208] (II) intel(0): 004231333358573034205630200a0056
[ 30.208] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 30.208] (II) intel(0): Printing DDC gathered Modelines:
[ 30.208] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 30.208] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 30.208] (II) intel(0): Printing probed modes for output LVDS1
[ 30.208] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 30.208] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 30.208] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 30.208] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 30.208] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 30.208] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 30.208] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 30.208] (II) intel(0): EDID for output VGA1
[ 30.208] (II) intel(0): Output LVDS1 connected
[ 30.208] (II) intel(0): Output VGA1 disconnected
[ 30.208] (II) intel(0): Using exact sizes for initial modes
[ 30.209] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 30.209] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 30.209] (II) intel(0): Kernel page flipping support detected, enabling
[ 30.209] (**) intel(0): Display dimensions: (290, 160) mm
[ 30.209] (**) intel(0): DPI set to (119, 121)
[ 30.209] (II) Loading sub module "fb"
[ 30.209] (II) LoadModule: "fb"
[ 30.209] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 30.209] (II) Module fb: vendor="X.Org Foundation"
[ 30.209] compiled for 1.10.4, module version = 1.0.0
[ 30.209] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.209] (II) Loading sub module "dri2"
[ 30.209] (II) LoadModule: "dri2"
[ 30.209] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.209] (II) Module dri2: vendor="X.Org Foundation"
[ 30.209] compiled for 1.10.4, module version = 1.2.0
[ 30.209] ABI class: X.Org Server Extension, version 5.0
[ 30.209] (==) Depth 24 pixmap format is 32 bpp
[ 30.209] (II) intel(0): [DRI2] Setup complete
[ 30.209] (II) intel(0): [DRI2] DRI driver: i965
[ 30.209] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 30.217] (II) UXA(0): Driver registered support for the following operations:
[ 30.217] (II) solid
[ 30.217] (II) copy
[ 30.217] (II) composite (RENDER acceleration)
[ 30.217] (II) put_image
[ 30.217] (II) get_image
[ 30.217] (==) intel(0): Backing store disabled
[ 30.217] (==) intel(0): Silken mouse enabled
[ 30.217] (II) intel(0): Initializing HW Cursor
[ 30.280] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 30.280] (==) intel(0): DPMS enabled
[ 30.280] (==) intel(0): Intel XvMC decoder enabled
[ 30.280] (II) intel(0): Set up textured video
[ 30.280] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 30.280] (II) intel(0): direct rendering: DRI2 Enabled
[ 30.280] (==) intel(0): hotplug detection: "enabled"
[ 30.280] (--) RandR disabled
[ 30.281] (II) Initializing built-in extension Generic Event Extension
[ 30.281] (II) Initializing built-in extension SHAPE
[ 30.281] (II) Initializing built-in extension MIT-SHM
[ 30.281] (II) Initializing built-in extension XInputExtension
[ 30.281] (II) Initializing built-in extension XTEST
[ 30.281] (II) Initializing built-in extension BIG-REQUESTS
[ 30.281] (II) Initializing built-in extension SYNC
[ 30.281] (II) Initializing built-in extension XKEYBOARD
[ 30.281] (II) Initializing built-in extension XC-MISC
[ 30.281] (II) Initializing built-in extension SECURITY
[ 30.281] (II) Initializing built-in extension XINERAMA
[ 30.281] (II) Initializing built-in extension XFIXES
[ 30.281] (II) Initializing built-in extension RENDER
[ 30.281] (II) Initializing built-in extension RANDR
[ 30.281] (II) Initializing built-in extension COMPOSITE
[ 30.281] (II) Initializing built-in extension DAMAGE
[ 30.281] (II) SELinux: Disabled on system
[ 30.297] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 30.297] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 30.297] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 30.297] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 30.297] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 30.297] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[ 30.297] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 30.298] (II) intel(0): Setting screen physical size to 361 x 203
[ 30.389] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 30.389] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.389] (II) LoadModule: "evdev"
[ 30.389] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.389] (II) Module evdev: vendor="X.Org Foundation"
[ 30.389] compiled for 1.10.3, module version = 2.6.0
[ 30.389] Module class: X.Org XInput Driver
[ 30.389] ABI class: X.Org XInput driver, version 12.2
[ 30.389] (II) Using input driver 'evdev' for 'Power Button'
[ 30.389] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.389] (**) Power Button: always reports core events
[ 30.389] (**) Power Button: Device: "/dev/input/event5"
[ 30.389] (--) Power Button: Found keys
[ 30.389] (II) Power Button: Configuring as keyboard
[ 30.389] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 30.389] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.389] (**) Option "xkb_rules" "evdev"
[ 30.389] (**) Option "xkb_model" "pc105"
[ 30.389] (**) Option "xkb_layout" "us"
[ 30.393] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 30.394] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.394] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.394] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.394] (**) Video Bus: always reports core events
[ 30.394] (**) Video Bus: Device: "/dev/input/event11"
[ 30.394] (--) Video Bus: Found keys
[ 30.394] (II) Video Bus: Configuring as keyboard
[ 30.394] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11/event11"
[ 30.394] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 30.394] (**) Option "xkb_rules" "evdev"
[ 30.394] (**) Option "xkb_model" "pc105"
[ 30.394] (**) Option "xkb_layout" "us"
[ 30.402] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 30.402] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.402] (II) Using input driver 'evdev' for 'Power Button'
[ 30.402] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.402] (**) Power Button: always reports core events
[ 30.402] (**) Power Button: Device: "/dev/input/event3"
[ 30.402] (--) Power Button: Found keys
[ 30.402] (II) Power Button: Configuring as keyboard
[ 30.402] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 30.402] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.402] (**) Option "xkb_rules" "evdev"
[ 30.402] (**) Option "xkb_model" "pc105"
[ 30.402] (**) Option "xkb_layout" "us"
[ 30.402] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 30.403] (II) No input driver/identifier specified (ignoring)
[ 30.403] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 30.403] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 30.403] (II) Using input driver 'evdev' for 'Sleep Button'
[ 30.403] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.403] (**) Sleep Button: always reports core events
[ 30.403] (**) Sleep Button: Device: "/dev/input/event4"
[ 30.403] (--) Sleep Button: Found keys
[ 30.403] (II) Sleep Button: Configuring as keyboard
[ 30.403] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[ 30.403] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 30.403] (**) Option "xkb_rules" "evdev"
[ 30.403] (**) Option "xkb_model" "pc105"
[ 30.403] (**) Option "xkb_layout" "us"
[ 30.405] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 30.405] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 30.405] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 30.405] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.405] (**) USB OPTICAL MOUSE: always reports core events
[ 30.405] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 30.405] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
[ 30.405] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
[ 30.405] (--) USB OPTICAL MOUSE: Found relative axes
[ 30.405] (--) USB OPTICAL MOUSE: Found x and y relative axes
[ 30.405] (II) USB OPTICAL MOUSE: Configuring as mouse
[ 30.405] (II) USB OPTICAL MOUSE: Adding scrollwheel support
[ 30.405] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 30.405] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.405] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1/event1"
[ 30.405] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE)
[ 30.405] (II) USB OPTICAL MOUSE: initialized for relative axes.
[ 30.405] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 30.405] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 30.405] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 30.405] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 30.406] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 30.406] (II) No input driver/identifier specified (ignoring)
[ 30.406] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 30.406] (II) No input driver/identifier specified (ignoring)
[ 30.406] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event13)
[ 30.406] (II) No input driver/identifier specified (ignoring)
[ 30.406] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event14)
[ 30.407] (II) No input driver/identifier specified (ignoring)
[ 30.408] (II) config/udev: Adding input device USB Gamepad (/dev/input/event7)
[ 30.408] (II) No input driver/identifier specified (ignoring)
[ 30.408] (II) config/udev: Adding input device USB Gamepad (/dev/input/js0)
[ 30.408] (II) No input driver/identifier specified (ignoring)
[ 30.408] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event9)
[ 30.408] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 30.408] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 30.408] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.409] (**) Lenovo EasyCamera: always reports core events
[ 30.409] (**) Lenovo EasyCamera: Device: "/dev/input/event9"
[ 30.409] (--) Lenovo EasyCamera: Found keys
[ 30.409] (II) Lenovo EasyCamera: Configuring as keyboard
[ 30.409] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input9/event9"
[ 30.409] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD)
[ 30.409] (**) Option "xkb_rules" "evdev"
[ 30.409] (**) Option "xkb_model" "pc105"
[ 30.409] (**) Option "xkb_layout" "us"
[ 30.412] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 30.412] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.412] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 30.412] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.412] (**) AT Translated Set 2 keyboard: always reports core events
[ 30.412] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 30.412] (--) AT Translated Set 2 keyboard: Found keys
[ 30.412] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 30.412] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 30.412] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 30.412] (**) Option "xkb_rules" "evdev"
[ 30.412] (**) Option "xkb_model" "pc105"
[ 30.412] (**) Option "xkb_layout" "us"
[ 30.413] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event10)
[ 30.413] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 30.413] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 30.413] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.413] (**) PS/2 Generic Mouse: always reports core events
[ 30.413] (**) PS/2 Generic Mouse: Device: "/dev/input/event10"
[ 30.413] (--) PS/2 Generic Mouse: Found 3 mouse buttons
[ 30.413] (--) PS/2 Generic Mouse: Found relative axes
[ 30.413] (--) PS/2 Generic Mouse: Found x and y relative axes
[ 30.413] (II) PS/2 Generic Mouse: Configuring as mouse
[ 30.413] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 30.413] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.413] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input10/event10"
[ 30.413] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
[ 30.413] (II) PS/2 Generic Mouse: initialized for relative axes.
[ 30.413] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 30.413] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 30.413] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 30.413] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 30.413] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[ 30.413] (II) No input driver/identifier specified (ignoring)
[ 30.414] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
[ 30.414] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 30.414] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[ 30.414] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.414] (**) Ideapad extra buttons: always reports core events
[ 30.414] (**) Ideapad extra buttons: Device: "/dev/input/event8"
[ 30.414] (--) Ideapad extra buttons: Found keys
[ 30.414] (II) Ideapad extra buttons: Configuring as keyboard
[ 30.414] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input8/event8"
[ 30.414] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD)
[ 30.414] (**) Option "xkb_rules" "evdev"
[ 30.414] (**) Option "xkb_model" "pc105"
[ 30.414] (**) Option "xkb_layout" "us"
[ 30.414] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 30.414] (II) No input driver/identifier specified (ignoring)
[ 30.417] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event15)
[ 30.418] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 30.418] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 30.418] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.418] (**) ACPI Virtual Keyboard Device: always reports core events
[ 30.418] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event15"
[ 30.418] (--) ACPI Virtual Keyboard Device: Found keys
[ 30.418] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[ 30.418] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event15"
[ 30.418] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
[ 30.418] (**) Option "xkb_rules" "evdev"
[ 30.418] (**) Option "xkb_model" "pc105"
[ 30.418] (**) Option "xkb_layout" "us"
[ 31.131] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 31.131] (II) intel(0): Printing DDC gathered Modelines:
[ 31.131] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 31.132] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 31.133] (II) intel(0): Printing DDC gathered Modelines:
[ 31.133] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 31.143] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 31.143] (II) intel(0): Printing DDC gathered Modelines:
[ 31.143] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 48.906] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 48.906] (II) intel(0): Printing DDC gathered Modelines:
[ 48.906] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 48.907] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 48.907] (II) intel(0): Printing DDC gathered Modelines:
[ 48.907] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 48.908] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 48.908] (II) intel(0): Printing DDC gathered Modelines:
[ 48.908] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 51.956] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 51.956] (II) intel(0): Printing DDC gathered Modelines:
[ 51.956] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[-- Attachment #6: V2-00-dmesg.txt --]
[-- Type: text/plain, Size: 52079 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.4debugpsmouse (mengdaxing@ldebian) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Fri Jul 6 07:44:49 CST 2012
[ 0.000000] Command line: root=/dev/sda7 acpi_backlight=vendor ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007727c000 (usable)
[ 0.000000] BIOS-e820: 000000007727c000 - 0000000077282000 (reserved)
[ 0.000000] BIOS-e820: 0000000077282000 - 00000000773ee000 (usable)
[ 0.000000] BIOS-e820: 00000000773ee000 - 000000007740f000 (reserved)
[ 0.000000] BIOS-e820: 000000007740f000 - 000000007746f000 (usable)
[ 0.000000] BIOS-e820: 000000007746f000 - 0000000077470000 (reserved)
[ 0.000000] BIOS-e820: 0000000077470000 - 00000000774f1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000774f1000 - 000000007770f000 (reserved)
[ 0.000000] BIOS-e820: 000000007770f000 - 0000000077717000 (usable)
[ 0.000000] BIOS-e820: 0000000077717000 - 000000007771f000 (reserved)
[ 0.000000] BIOS-e820: 000000007771f000 - 000000007775e000 (usable)
[ 0.000000] BIOS-e820: 000000007775e000 - 000000007779f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007779f000 - 00000000777e1000 (usable)
[ 0.000000] BIOS-e820: 00000000777e1000 - 00000000777ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000777ff000 - 0000000077800000 (usable)
[ 0.000000] BIOS-e820: 0000000077800000 - 000000007c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0804000 - 00000000f0805000 (reserved)
[ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO G360 /LL1 , BIOS 61CN06WW 10/27/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x77800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 078000000 mask FF8000000 uncachable
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f6200] f6200
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-0000000077800000
[ 0.000000] 0000000000 - 0077800000 page 2M
[ 0.000000] kernel direct mapping tables up to 77800000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 6fc5c000 - 7726c000
[ 0.000000] ACPI: RSDP 00000000000f60c0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000777f2fcb 0005C (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000777e3000 000F4 (v03 LENOVO CB-01 06040000 PTEC 00000001)
[ 0.000000] ACPI: DSDT 00000000777e4000 0BBBF (v02 LENOVO CB-01 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 000000007779bfc0 00040
[ 0.000000] ACPI: HPET 00000000777fed86 00038 (v01 LENOVO CB-01 06040000 PTEC 00000001)
[ 0.000000] ACPI: MCFG 00000000777fedbe 0003C (v01 LENOVO CB-01 06040000 PTEC 00000001)
[ 0.000000] ACPI: APIC 00000000777fedfa 00068 (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000777fee62 00028 (v01 LENOVO CB-01 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000777fee8a 00176 (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000777e2000 009F1 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000077800000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000077800000
[ 0.000000] NODE_DATA [00000000777dd000 - 00000000777e0fff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88006d600000-ffff88006f1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x0007727c
[ 0.000000] 0: 0x00077282 -> 0x000773ee
[ 0.000000] 0: 0x0007740f -> 0x0007746f
[ 0.000000] 0: 0x0007770f -> 0x00077717
[ 0.000000] 0: 0x0007771f -> 0x0007775e
[ 0.000000] 0: 0x0007779f -> 0x000777e1
[ 0.000000] 0: 0x000777ff -> 0x00077800
[ 0.000000] On node 0 totalpages: 488542
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3919 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6636 pages used for memmap
[ 0.000000] DMA32 zone: 477926 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007727c000 - 0000000077282000
[ 0.000000] PM: Registered nosave memory: 00000000773ee000 - 000000007740f000
[ 0.000000] PM: Registered nosave memory: 000000007746f000 - 0000000077470000
[ 0.000000] PM: Registered nosave memory: 0000000077470000 - 00000000774f1000
[ 0.000000] PM: Registered nosave memory: 00000000774f1000 - 000000007770f000
[ 0.000000] PM: Registered nosave memory: 0000000077717000 - 000000007771f000
[ 0.000000] PM: Registered nosave memory: 000000007775e000 - 000000007779f000
[ 0.000000] PM: Registered nosave memory: 00000000777e1000 - 00000000777ff000
[ 0.000000] Allocating PCI resources starting at 7c000000 (gap: 7c000000:64000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88006fa00000 s82304 r8192 d24192 u1048576
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 481845
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda7 acpi_backlight=vendor ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1795820k/1957888k available (3581k kernel code, 3720k absent, 158348k reserved, 3112k data, 604k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 7864320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2128.062 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.12 BogoMIPS (lpj=8512248)
[ 0.000152] pid_max: default: 32768 minimum: 301
[ 0.000262] Security Framework initialized
[ 0.000338] AppArmor: AppArmor disabled by boot time parameter
[ 0.000551] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001347] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.001755] Mount-cache hash table entries: 256
[ 0.002035] Initializing cgroup subsys cpuacct
[ 0.002109] Initializing cgroup subsys memory
[ 0.002191] Initializing cgroup subsys devices
[ 0.002264] Initializing cgroup subsys freezer
[ 0.002336] Initializing cgroup subsys net_cls
[ 0.002408] Initializing cgroup subsys blkio
[ 0.002485] Initializing cgroup subsys perf_event
[ 0.002585] CPU: Physical Processor ID: 0
[ 0.002656] CPU: Processor Core ID: 0
[ 0.002729] mce: CPU supports 9 MCE banks
[ 0.002809] CPU0: Thermal monitoring enabled (TM1)
[ 0.002889] using mwait in idle threads.
[ 0.003999] ACPI: Core revision 20120320
[ 0.023651] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063400] CPU0: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz stepping 05
[ 0.171134] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.171408] CPUID marked event: 'bus cycles' unavailable
[ 0.171487] ... version: 3
[ 0.171563] ... bit width: 48
[ 0.171636] ... generic registers: 4
[ 0.171708] ... value mask: 0000ffffffffffff
[ 0.171785] ... max period: 000000007fffffff
[ 0.171862] ... fixed-purpose events: 3
[ 0.171935] ... event mask: 000000070000000f
[ 0.172158] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.172351] Booting Node 0, Processors #1 Ok.
[ 0.183421] CPU1: Thermal monitoring handled by SMI
[ 0.185533] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.185656] Brought up 2 CPUs
[ 0.185729] Total of 2 processors activated (8512.24 BogoMIPS).
[ 0.187031] devtmpfs: initialized
[ 0.191230] PM: Registering ACPI NVS region [mem 0x77470000-0x774f0fff] (528384 bytes)
[ 0.191358] PM: Registering ACPI NVS region [mem 0x7775e000-0x7779efff] (266240 bytes)
[ 0.191569] dummy:
[ 0.191699] NET: Registered protocol family 16
[ 0.191896] ACPI: bus type pci registered
[ 0.192052] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.192160] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.237598] PCI: Using configuration type 1 for base access
[ 0.238298] bio: create slab <bio-0> at 0
[ 0.238461] ACPI: Added _OSI(Module Device)
[ 0.238536] ACPI: Added _OSI(Processor Device)
[ 0.238610] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.238689] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.240307] ACPI: EC: Look up EC in DSDT
[ 0.248392] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.248948] ACPI: SSDT 000000007771ac18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.249514] ACPI: Dynamic OEM Table Load:
[ 0.249675] ACPI: SSDT (null) 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.250047] ACPI: SSDT 0000000077718018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.253055] ACPI: Dynamic OEM Table Load:
[ 0.253213] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.253763] ACPI: SSDT 0000000077719a98 00303 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.254392] ACPI: Dynamic OEM Table Load:
[ 0.254551] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.254907] ACPI: SSDT 0000000077717d98 00119 (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.255483] ACPI: Dynamic OEM Table Load:
[ 0.255643] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.264844] ACPI: Interpreter enabled
[ 0.264922] ACPI: (supports S0 S3 S4 S5)
[ 0.265189] ACPI: Using IOAPIC for interrupt routing
[ 0.277136] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.277422] ACPI: No dock devices found.
[ 0.277506] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.278094] \_SB_.PCI0:_OSC invalid UUID
[ 0.278096] _OSC request data:1 8 1f
[ 0.278101] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.278929] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.279015] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.279100] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.279205] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.279314] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.279418] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.279524] pci_root PNP0A08:00: host bridge window [mem 0x7c000000-0xfeafffff]
[ 0.279663] PCI host bridge to bus 0000:00
[ 0.279739] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.279821] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.279902] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.279987] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.280070] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.280153] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.280235] pci_bus 0000:00: root bus resource [mem 0x7c000000-0xfeafffff]
[ 0.280329] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.280348] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.280474] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.280508] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.280523] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.280535] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.280542] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.280547] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.280624] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.280650] pci 0000:00:1a.0: reg 10: [mem 0xf0806000-0xf08063ff]
[ 0.280762] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.280798] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.280820] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
[ 0.280920] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.280952] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.281055] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.281088] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.281191] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.281227] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.281330] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.281373] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.281399] pci 0000:00:1d.0: reg 10: [mem 0xf0806400-0xf08067ff]
[ 0.281516] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.281545] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.281635] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.281771] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.281799] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
[ 0.281810] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
[ 0.281822] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
[ 0.281833] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
[ 0.281845] pci 0000:00:1f.2: reg 20: [io 0x1820-0x183f]
[ 0.281857] pci 0000:00:1f.2: reg 24: [mem 0xf0805000-0xf08057ff]
[ 0.281925] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.281951] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.281973] pci 0000:00:1f.3: reg 10: [mem 0xf0806800-0xf08068ff 64bit]
[ 0.282004] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
[ 0.282056] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.282084] pci 0000:00:1f.6: reg 10: [mem 0xf0804000-0xf0804fff 64bit]
[ 0.282234] pci 0000:01:00.0: [10de:0a70] type 00 class 0x030000
[ 0.282250] pci 0000:01:00.0: reg 10: [mem 0xac000000-0xacffffff]
[ 0.282266] pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.282283] pci 0000:01:00.0: reg 1c: [mem 0xae000000-0xafffffff 64bit pref]
[ 0.282295] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.282307] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.282412] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.282492] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.282495] pci 0000:00:01.0: bridge window [mem 0xac000000-0xadefffff]
[ 0.282499] pci 0000:00:01.0: bridge window [mem 0xae000000-0xbfffffff 64bit pref]
[ 0.282557] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.282742] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[ 0.282785] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf050ffff 64bit]
[ 0.282986] pci 0000:03:00.0: supports D1
[ 0.282988] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.283071] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.283155] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.283241] pci 0000:08:00.0: [1969:2060] type 00 class 0x020000
[ 0.283271] pci 0000:08:00.0: reg 10: [mem 0xf0400000-0xf043ffff 64bit]
[ 0.283286] pci 0000:08:00.0: reg 18: [io 0x3000-0x307f]
[ 0.283412] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.293490] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[ 0.293584] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.293589] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.293670] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
[ 0.293768] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.293771] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.293773] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.293776] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.293780] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.293782] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.293785] pci 0000:00:1e.0: bridge window [mem 0x7c000000-0xfeafffff] (subtractive decode)
[ 0.293815] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.294083] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.294161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.294329] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.294399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.294474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.294623] \_SB_.PCI0:_OSC invalid UUID
[ 0.294624] _OSC request data:1 1f 1f
[ 0.294629] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.294750] \_SB_.PCI0:_OSC invalid UUID
[ 0.294751] _OSC request data:1 0 1d
[ 0.294755] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.294863] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.301152] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.301305] PCI host bridge to bus 0000:ff
[ 0.301384] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.301406] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.301431] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.301450] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.301474] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.301493] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.301528] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.301608] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.301717] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.302044] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.302677] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.303376] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.304008] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.304639] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.305380] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.306124] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.306817] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.307497] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.307613] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.307721] vgaarb: loaded
[ 0.307792] vgaarb: bridge control possible 0000:01:00.0
[ 0.307869] vgaarb: no bridge control possible 0000:00:02.0
[ 0.307976] PCI: Using ACPI for IRQ routing
[ 0.317983] PCI: pci_cache_line_size set to 64 bytes
[ 0.318080] reserve RAM buffer: 000000000009c400 - 000000000009ffff
[ 0.318082] reserve RAM buffer: 000000007727c000 - 0000000077ffffff
[ 0.318088] reserve RAM buffer: 00000000773ee000 - 0000000077ffffff
[ 0.318093] reserve RAM buffer: 000000007746f000 - 0000000077ffffff
[ 0.318097] reserve RAM buffer: 0000000077717000 - 0000000077ffffff
[ 0.318101] reserve RAM buffer: 000000007775e000 - 0000000077ffffff
[ 0.318104] reserve RAM buffer: 00000000777e1000 - 0000000077ffffff
[ 0.318106] reserve RAM buffer: 0000000077800000 - 0000000077ffffff
[ 0.318245] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.318706] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.320805] Switching to clocksource hpet
[ 0.322696] pnp: PnP ACPI init
[ 0.322787] ACPI: bus type pnp registered
[ 0.323267] pnp 00:00: [bus 00-fe]
[ 0.323270] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.323273] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.323275] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.323277] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.323279] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.323282] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.323284] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.323286] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.323288] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.323290] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.323292] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.323294] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.323296] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.323298] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.323301] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.323303] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.323305] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.323307] pnp 00:00: [mem 0x7c000000-0xfeafffff window]
[ 0.323309] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.323366] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.323474] pnp 00:01: [io 0x0000-0x001f]
[ 0.323477] pnp 00:01: [io 0x0081-0x0091]
[ 0.323478] pnp 00:01: [io 0x0093-0x009f]
[ 0.323480] pnp 00:01: [io 0x00c0-0x00df]
[ 0.323482] pnp 00:01: [dma 4]
[ 0.323517] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.323527] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.323561] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.323649] pnp 00:03: [irq 0 disabled]
[ 0.323662] pnp 00:03: [irq 8]
[ 0.323665] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.323701] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.323712] pnp 00:04: [io 0x00f0]
[ 0.323718] pnp 00:04: [irq 13]
[ 0.323753] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.323767] pnp 00:05: [io 0x002e-0x002f]
[ 0.323769] pnp 00:05: [io 0x004e-0x004f]
[ 0.323771] pnp 00:05: [io 0x0061]
[ 0.323773] pnp 00:05: [io 0x0063]
[ 0.323774] pnp 00:05: [io 0x0065]
[ 0.323776] pnp 00:05: [io 0x0067]
[ 0.323778] pnp 00:05: [io 0x0070]
[ 0.323780] pnp 00:05: [io 0x0080]
[ 0.323781] pnp 00:05: [io 0x0092]
[ 0.323783] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.323785] pnp 00:05: [io 0x0680-0x069f]
[ 0.323787] pnp 00:05: [io 0x0500-0x050f]
[ 0.323789] pnp 00:05: [io 0x0600-0x0603]
[ 0.323790] pnp 00:05: [io 0xffff]
[ 0.323792] pnp 00:05: [io 0x0400-0x047f]
[ 0.323794] pnp 00:05: [io 0x1180-0x11ff]
[ 0.323796] pnp 00:05: [io 0x164e-0x164f]
[ 0.323797] pnp 00:05: [io 0xfe00]
[ 0.323799] pnp 00:05: [io 0x0068]
[ 0.323801] pnp 00:05: [io 0x006c]
[ 0.323803] pnp 00:05: [io 0x0700-0x070f]
[ 0.323867] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.323953] system 00:05: [io 0x0500-0x050f] has been reserved
[ 0.324035] system 00:05: [io 0x0600-0x0603] has been reserved
[ 0.324114] system 00:05: [io 0xffff] has been reserved
[ 0.324192] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.324273] system 00:05: [io 0x1180-0x11ff] has been reserved
[ 0.324352] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.324434] system 00:05: [io 0xfe00] has been reserved
[ 0.324513] system 00:05: [io 0x0700-0x070f] has been reserved
[ 0.324593] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.324630] pnp 00:06: [io 0x06a0-0x06af]
[ 0.324632] pnp 00:06: [io 0x06b0-0x06ff]
[ 0.324685] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.324766] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.324846] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.324899] pnp 00:07: [io 0x0070-0x0077]
[ 0.324937] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.324968] pnp 00:08: [io 0x0060]
[ 0.324970] pnp 00:08: [io 0x0064]
[ 0.324976] pnp 00:08: [irq 1]
[ 0.325013] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.325027] pnp 00:09: [irq 12]
[ 0.325063] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.325364] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.325367] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[ 0.325369] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.325371] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.325373] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.325376] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.325378] pnp 00:0a: [mem 0xfeaff000-0xfeafffff]
[ 0.325380] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.325382] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[ 0.325384] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.325386] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.325388] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.325390] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.325453] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.325535] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.325618] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.325701] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.325784] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.325868] system 00:0a: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.325950] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.326036] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.326117] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.326199] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.326285] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.326370] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.326556] pnp 00:0b: [bus ff]
[ 0.326600] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.326970] pnp: PnP ACPI: found 12 devices
[ 0.327048] ACPI: ACPI bus type pnp unregistered
[ 0.334127] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
[ 0.334132] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
[ 0.334136] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000
[ 0.334148] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000
[ 0.334152] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 0.334164] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08-08] add_size 200000
[ 0.334183] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.334186] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.334189] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.334192] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.334195] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.334197] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.334203] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7c000000-0x7c1fffff]
[ 0.334292] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7c200000-0x7c3fffff 64bit pref]
[ 0.334401] pci 0000:00:1c.1: BAR 15: assigned [mem 0x7c400000-0x7c5fffff 64bit pref]
[ 0.334507] pci 0000:00:1c.4: BAR 15: assigned [mem 0x7c600000-0x7c7fffff 64bit pref]
[ 0.334614] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.334695] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.334781] pci 0000:01:00.0: BAR 6: assigned [mem 0xad000000-0xad07ffff pref]
[ 0.334884] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.334961] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.335042] pci 0000:00:01.0: bridge window [mem 0xac000000-0xadefffff]
[ 0.335127] pci 0000:00:01.0: bridge window [mem 0xae000000-0xbfffffff 64bit pref]
[ 0.335234] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.335312] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.335398] pci 0000:00:1c.0: bridge window [mem 0x7c000000-0x7c1fffff]
[ 0.335484] pci 0000:00:1c.0: bridge window [mem 0x7c200000-0x7c3fffff 64bit pref]
[ 0.335594] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.335671] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.335759] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.335844] pci 0000:00:1c.1: bridge window [mem 0x7c400000-0x7c5fffff 64bit pref]
[ 0.335955] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[ 0.336034] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.336122] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.336207] pci 0000:00:1c.4: bridge window [mem 0x7c600000-0x7c7fffff 64bit pref]
[ 0.336318] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[ 0.336446] pci 0000:00:1e.0: setting latency timer to 64
[ 0.336451] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.336453] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.336456] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.336458] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.336460] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.336462] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.336465] pci_bus 0000:00: resource 10 [mem 0x7c000000-0xfeafffff]
[ 0.336467] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.336469] pci_bus 0000:01: resource 1 [mem 0xac000000-0xadefffff]
[ 0.336472] pci_bus 0000:01: resource 2 [mem 0xae000000-0xbfffffff 64bit pref]
[ 0.336474] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.336476] pci_bus 0000:02: resource 1 [mem 0x7c000000-0x7c1fffff]
[ 0.336478] pci_bus 0000:02: resource 2 [mem 0x7c200000-0x7c3fffff 64bit pref]
[ 0.336481] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.336483] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.336485] pci_bus 0000:03: resource 2 [mem 0x7c400000-0x7c5fffff 64bit pref]
[ 0.336488] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
[ 0.336490] pci_bus 0000:08: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.336492] pci_bus 0000:08: resource 2 [mem 0x7c600000-0x7c7fffff 64bit pref]
[ 0.336495] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.336497] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 0.336500] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.336502] pci_bus 0000:0a: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.336504] pci_bus 0000:0a: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.336506] pci_bus 0000:0a: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.336509] pci_bus 0000:0a: resource 10 [mem 0x7c000000-0xfeafffff]
[ 0.336576] NET: Registered protocol family 2
[ 0.336745] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.337318] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.338700] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.339107] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.339189] TCP: reno registered
[ 0.339269] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.339360] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.339563] NET: Registered protocol family 1
[ 0.339660] pci 0000:00:02.0: Boot video device
[ 0.339817] PCI: CLS 64 bytes, default 64
[ 0.339870] Unpacking initramfs...
[ 3.244045] Freeing initrd memory: 120896k freed
[ 3.271756] Simple Boot Flag at 0x36 set to 0x1
[ 3.272292] audit: initializing netlink socket (disabled)
[ 3.272382] type=2000 audit(1341659157.156:1): initialized
[ 3.286674] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.287241] VFS: Disk quotas dquot_6.5.2
[ 3.287337] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.287493] msgmni has been set to 3743
[ 3.287737] alg: No test for stdrng (krng)
[ 3.287835] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.287953] io scheduler noop registered
[ 3.288025] io scheduler deadline registered
[ 3.288113] io scheduler cfq registered (default)
[ 3.288304] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 3.288523] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.288620] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.288704] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.289204] intel_idle: MWAIT substates: 0x120
[ 3.289206] intel_idle: v0.4 model 0x25
[ 3.289208] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.289247] GHES: HEST is not enabled!
[ 3.289377] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.289939] Linux agpgart interface v0.103
[ 3.290082] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 3.290279] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 3.291216] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 3.291441] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.291664] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.296342] i8042: Detected active multiplexing controller, rev 1.1
[ 3.298322] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.300899] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.301004] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.301103] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.301202] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.301390] mousedev: PS/2 mouse device common for all mice
[ 3.301522] rtc_cmos 00:07: RTC can wake from S4
[ 3.301739] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.301850] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.301973] cpuidle: using governor ladder
[ 3.302086] cpuidle: using governor menu
[ 3.302281] TCP: cubic registered
[ 3.302437] NET: Registered protocol family 10
[ 3.302777] Mobile IPv6
[ 3.302846] NET: Registered protocol family 17
[ 3.302923] Registering the dns_resolver key type
[ 3.303291] PM: Hibernation image not present or could not be loaded.
[ 3.303305] registered taskstats version 1
[ 3.304017] rtc_cmos 00:07: setting system clock to 2012-07-07 11:05:58 UTC (1341659158)
[ 3.304335] Initializing network drop monitor service
[ 3.317425] Freeing unused kernel memory: 604k freed
[ 3.317609] Write protecting the kernel read-only data: 6144k
[ 3.319627] Freeing unused kernel memory: 496k freed
[ 3.322428] Freeing unused kernel memory: 720k freed
[ 3.348987] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.454092] udev[54]: starting version 164
[ 3.498037] SCSI subsystem initialized
[ 3.513101] usbcore: registered new interface driver usbfs
[ 3.513208] usbcore: registered new interface driver hub
[ 3.513391] usbcore: registered new device driver usb
[ 3.514374] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.514507] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.514511] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.514617] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.514755] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.518814] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.519829] libata version 3.00 loaded.
[ 3.538765] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0806000
[ 3.539143] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.539236] ACPI: Thermal Zone [TZ00] (59 C)
[ 3.547581] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.547704] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.547815] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.547919] usb usb1: Product: EHCI Host Controller
[ 3.547999] usb usb1: Manufacturer: Linux 3.4.4debugpsmouse ehci_hcd
[ 3.548083] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.548431] hub 1-0:1.0: USB hub found
[ 3.548511] hub 1-0:1.0: 3 ports detected
[ 3.548671] ahci 0000:00:1f.2: version 3.0
[ 3.548748] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 3.548793] ahci: SSS flag set, parallel bus scan disabled
[ 3.548915] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x32 impl SATA mode
[ 3.549023] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 3.549135] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.564193] scsi0 : ahci
[ 3.564464] scsi1 : ahci
[ 3.564730] scsi2 : ahci
[ 3.564987] scsi3 : ahci
[ 3.565242] scsi4 : ahci
[ 3.565469] scsi5 : ahci
[ 3.565665] ata1: DUMMY
[ 3.565747] ata2: SATA max UDMA/133 abar m2048@0xf0805000 port 0xf0805180 irq 41
[ 3.565865] ata3: DUMMY
[ 3.565943] ata4: DUMMY
[ 3.566024] ata5: SATA max UDMA/133 abar m2048@0xf0805000 port 0xf0805300 irq 41
[ 3.566144] ata6: SATA max UDMA/133 abar m2048@0xf0805000 port 0xf0805380 irq 41
[ 3.566390] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.566397] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.566517] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.566694] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.570790] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.570817] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0806400
[ 3.579577] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.579701] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.579797] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.579914] usb usb2: Product: EHCI Host Controller
[ 3.580001] usb usb2: Manufacturer: Linux 3.4.4debugpsmouse ehci_hcd
[ 3.580093] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.580449] hub 2-0:1.0: USB hub found
[ 3.580543] hub 2-0:1.0: 3 ports detected
[ 3.624021] atl1c 0000:08:00.0: version 1.0.1.0-NAPI
[ 3.859462] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.883462] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.937627] ata2.00: ATA-8: TOSHIBA MK3265GSX, GJ205E, max UDMA/100
[ 3.937722] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.938762] ata2.00: configured for UDMA/100
[ 3.939209] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK3265GS GJ20 PQ: 0 ANSI: 5
[ 3.991745] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 3.991837] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.992316] hub 1-1:1.0: USB hub found
[ 3.992491] hub 1-1:1.0: 6 ports detected
[ 4.103364] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 4.235651] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 4.235742] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.236219] hub 2-1:1.0: USB hub found
[ 4.236351] hub 2-1:1.0: 8 ports detected
[ 4.259304] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.262370] ata5.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
[ 4.263676] ata5.00: configured for UDMA/100
[ 4.271302] Refined TSC clocksource calibration: 2127.999 MHz.
[ 4.271336] scsi 4:0:0:0: CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
[ 4.271496] Switching to clocksource tsc
[ 4.307376] usb 1-1.1: new low-speed USB device number 3 using ehci_hcd
[ 4.403072] usb 1-1.1: New USB device found, idVendor=15d9, idProduct=0a4f
[ 4.403175] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.403282] usb 1-1.1: Product: USB OPTICAL MOUSE
[ 4.507287] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[ 4.591157] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.597687] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4.597827] sd 1:0:0:0: [sda] Write Protect is off
[ 4.597901] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.597917] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.602749] usb 2-1.2: New USB device found, idVendor=0079, idProduct=0011
[ 4.602845] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4.602957] usb 2-1.2: Product: USB Gamepad
[ 4.611154] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
[ 4.611543] generic-usb 0003:15D9:0A4F.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.1/input0
[ 4.611785] usbcore: registered new interface driver usbhid
[ 4.611870] usbhid: USB HID core driver
[ 4.675207] usb 2-1.4: new high-speed USB device number 4 using ehci_hcd
[ 4.726642] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[ 4.728414] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.736609] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.736727] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.737040] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.740245] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 4.740360] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 4.782046] usb 2-1.4: New USB device found, idVendor=5986, idProduct=0294
[ 4.782140] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.782246] usb 2-1.4: Product: Lenovo EasyCamera
[ 4.782320] usb 2-1.4: Manufacturer: Bison Corp.
[ 5.543938] nbd: registered device at major 43
[ 5.559928] device-mapper: uevent: version 1.0.3
[ 5.560252] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 5.711851] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 17.536963] udev[369]: starting version 164
[ 17.843837] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 17.844431] ACPI: Lid Switch [LID]
[ 17.844563] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 17.844673] ACPI: Power Button [PWRB]
[ 17.844833] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 17.844936] ACPI: Sleep Button [SLPB]
[ 17.845145] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 17.845556] ACPI: Power Button [PWRF]
[ 18.079584] intel ips 0000:00:1f.6: No CPUID match found.
[ 18.079665] intel ips 0000:00:1f.6: IPS not supported on this CPU
[ 18.126195] ACPI: Requesting acpi_cpufreq
[ 18.163997] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 18.186631] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 18.192903] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 18.276187] input: USB Gamepad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input6
[ 18.276396] dragonrise 0003:0079:0011.0002: input,hidraw1: USB HID v1.10 Joystick [USB Gamepad ] on usb-0000:00:1d.0-1.2/input0
[ 18.448477] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 18.535547] ACPI: AC Adapter [ACAD] (on-line)
[ 18.902340] cfg80211: Calling CRDA to update world regulatory domain
[ 19.495754] psmouse serio4: alps: E6 report: 00 00 64
[ 19.521210] psmouse serio4: alps: E7 report: 73 03 50
[ 19.619902] ACPI: Battery Slot [BAT1] (battery present)
[ 19.622671] wmi: Mapper loaded
[ 19.765567] input: Ideapad extra buttons as /devices/platform/ideapad/input/input8
[ 19.934146] Linux media interface: v0.10
[ 19.935069] psmouse serio4: alps: E6 report: 00 00 64
[ 19.960457] psmouse serio4: alps: E7 report: 73 03 50
[ 20.000732] psmouse serio4: alps: Status: 10 00 0a
[ 20.026497] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input9
[ 20.042797] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input10
[ 20.059219] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 20.059430] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.128642] Linux video capture interface: v2.00
[ 20.593510] [drm] Initialized drm 1.1.0 20060810
[ 20.719237] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0294)
[ 20.721643] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input11
[ 20.721840] usbcore: registered new interface driver uvcvideo
[ 20.721916] USB Video Class driver (1.1.1)
[ 21.159986] i915 0000:00:02.0: setting latency timer to 64
[ 21.214361] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 21.214373] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 21.214459] [drm] Driver supports precise vblank timestamp query.
[ 21.214618] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 21.214726] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 21.214838] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 21.627715] fbcon: inteldrmfb (fb0) is primary device
[ 21.752240] ath: EEPROM regdomain: 0x65
[ 21.752244] ath: EEPROM indicates we should expect a direct regpair map
[ 21.752250] ath: Country alpha2 being used: 00
[ 21.752253] ath: Regpair used: 0x65
[ 21.778755] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 21.779204] Registered led device: ath9k-phy0
[ 21.779216] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90010920000, irq=17
[ 21.875313] Console: switching to colour frame buffer device 170x48
[ 21.882817] fb0: inteldrmfb frame buffer device
[ 21.882820] drm: registered panic notifier
[ 21.883109] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20120320/video-1147)
[ 21.883164] video: probe of LNXVIDEO:00 failed with error 5
[ 21.885789] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12
[ 21.885970] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 21.886100] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 21.886247] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 21.960568] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
[ 21.964914] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 21.965033] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 22.123821] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 22.166595] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 22.641608] loop: module loaded
[ 23.759344] fuse init (API version 7.18)
[ 24.781223] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.360823] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input16
[ 26.317349] Clocksource tsc unstable (delta = -555400892 ns)
[ 27.338689] atl1c 0000:08:00.0: irq 44 for MSI/MSI-X
[ 27.338709] Switching to clocksource hpet
[ 28.700870] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.397841] sshd (1952): /proc/1952/oom_adj is deprecated, please use /proc/1952/oom_score_adj instead.
[ 53.614877] wlan0: authenticate with ec:17:2f:2f:e9:b6
[ 53.628120] wlan0: send auth to ec:17:2f:2f:e9:b6 (try 1/3)
[ 53.630538] wlan0: authenticated
[ 53.638363] wlan0: associate with ec:17:2f:2f:e9:b6 (try 1/3)
[ 53.644330] wlan0: RX AssocResp from ec:17:2f:2f:e9:b6 (capab=0x431 status=0 aid=1)
[ 53.644339] wlan0: associated
[ 53.651270] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[-- Attachment #7: V2-00-inputdevices.txt --]
[-- Type: text/plain, Size: 4257 bytes --]
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0003 Vendor=15d9 Product=0a4f Version=0111
N: Name=" USB OPTICAL MOUSE"
P: Phys=usb-0000:00:1a.0-1.1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
U: Uniq=
H: Handlers=mouse0 event1
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=103
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event2
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=3
B: KEY=4000 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0003 Vendor=0079 Product=0011 Version=0110
N: Name="USB Gamepad "
P: Phys=usb-0000:00:1d.0-1.2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input6
U: Uniq=
H: Handlers=event6 js0
B: PROP=0
B: EV=1b
B: KEY=3ff00000000 0 0 0 0
B: ABS=3
B: MSC=10
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input7
U: Uniq=
H: Handlers=kbd event7
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Ideapad extra buttons"
P: Phys=ideapad/input0
S: Sysfs=/devices/platform/ideapad/input/input8
U: Uniq=
H: Handlers=kbd rfkill event8
B: PROP=0
B: EV=13
B: KEY=1400800000000 300000 0 0
B: MSC=10
I: Bus=0011 Vendor=0002 Product=0008 Version=0000
N: Name="PS/2 Mouse"
P: Phys=isa0060/serio4/input1
S: Sysfs=/devices/platform/i8042/serio4/input/input9
U: Uniq=
H: Handlers=mouse1 event9
B: PROP=0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
I: Bus=0011 Vendor=0002 Product=0008 Version=7335
N: Name="AlpsPS/2 ALPS GlidePoint"
P: Phys=isa0060/serio4/input0
S: Sysfs=/devices/platform/i8042/serio4/input/input10
U: Uniq=
H: Handlers=mouse2 event10
B: PROP=0
B: EV=b
B: KEY=420 70000 0 0 0 0
B: ABS=1000003
I: Bus=0003 Vendor=5986 Product=0294 Version=1403
N: Name="Lenovo EasyCamera"
P: Phys=usb-0000:00:1d.0-1.4/button
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input11
U: Uniq=
H: Handlers=kbd event11
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0001 Vendor=10ec Product=0272 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/input/input13
U: Uniq=
H: Handlers=kbd event13
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
U: Uniq=
H: Handlers=event14
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
U: Uniq=
H: Handlers=event15
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0003 Vendor=0000 Product=0000 Version=0004
N: Name="ACPI Virtual Keyboard Device"
P: Phys=
S: Sysfs=/devices/virtual/input/input16
U: Uniq=
H: Handlers=sysrq kbd rfkill event16
B: PROP=0
B: EV=3
B: KEY=ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe
[-- Attachment #8: V2-00-xinputlist.txt --]
[-- Type: text/plain, Size: 4699 bytes --]
⎡ Virtual core pointer id=2 [master pointer (3)]
Reporting 3 classes:
Class originated from: 14
Buttons supported: 12
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right None None None None None
Button state:
Class originated from: 14
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
Class originated from: 14
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 4
Buttons supported: 10
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right None None None
Button state:
Class originated from: 4
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 4
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
⎜ ↳ USB OPTICAL MOUSE id=10 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 10
Buttons supported: 7
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right
Button state:
Class originated from: 10
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
Class originated from: 10
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
⎜ ↳ AlpsPS/2 ALPS GlidePoint id=13 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 13
Buttons supported: 12
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right None None None None None
Button state:
Class originated from: 13
Detail for Valuator 0:
Label: Rel X
Range: 0.000000 - 1023.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 13
Detail for Valuator 1:
Label: Rel Y
Range: 0.000000 - 767.000000
Resolution: 0 units/m
Mode: relative
⎜ ↳ PS/2 Mouse id=14 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 14
Buttons supported: 5
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down
Button state:
Class originated from: 14
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
Class originated from: 14
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
⎣ Virtual core keyboard id=3 [master keyboard (2)]
Reporting 1 classes:
Class originated from: 12
Keycodes supported: 248
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 5
Keycodes supported: 248
↳ Power Button id=6 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 6
Keycodes supported: 248
↳ Video Bus id=7 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 7
Keycodes supported: 248
↳ Power Button id=8 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 8
Keycodes supported: 248
↳ Sleep Button id=9 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 9
Keycodes supported: 248
↳ Lenovo EasyCamera id=11 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 11
Keycodes supported: 248
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 12
Keycodes supported: 248
↳ Ideapad extra buttons id=15 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 15
Keycodes supported: 248
↳ ACPI Virtual Keyboard Device id=16 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 16
Keycodes supported: 248
[-- Attachment #9: V2-00-Xorg.0.log --]
[-- Type: application/octet-stream, Size: 33617 bytes --]
[ 29.855]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 29.856] X Protocol Version 11, Revision 0
[ 29.856] Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian
[ 29.856] Current Operating System: Linux ldebian 3.4.4debugpsmouse #1 SMP Fri Jul 6 07:44:49 CST 2012 x86_64
[ 29.856] Kernel command line: root=/dev/sda7 acpi_backlight=vendor ro
[ 29.856] Build Date: 28 August 2011 09:39:43PM
[ 29.856] xorg-server 2:1.10.4-1~bpo60+1 (Cyril Brulebois <kibi@debian.org>)
[ 29.856] Current version of pixman: 0.24.0
[ 29.856] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 29.856] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 29.856] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 7 11:06:25 2012
[ 29.897] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 29.897] (==) No Layout section. Using the first Screen section.
[ 29.897] (==) No screen section available. Using defaults.
[ 29.901] (**) |-->Screen "Default Screen Section" (0)
[ 29.901] (**) | |-->Monitor "<default monitor>"
[ 29.901] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 29.901] (==) Automatically adding devices
[ 29.901] (==) Automatically enabling devices
[ 29.901] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 29.901] Entry deleted from font path.
[ 29.901] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 29.901] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 29.901] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 29.901] (II) Loader magic: 0x7d3ae0
[ 29.901] (II) Module ABI versions:
[ 29.901] X.Org ANSI C Emulation: 0.4
[ 29.901] X.Org Video Driver: 10.0
[ 29.901] X.Org XInput driver : 12.2
[ 29.901] X.Org Server Extension : 5.0
[ 29.902] (--) PCI:*(0:0:2:0) 8086:0046:17aa:3920 rev 24, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 29.902] (--) PCI: (0:1:0:0) 10de:0a70:17aa:3968 rev 162, Mem @ 0xac000000/16777216, 0xb0000000/268435456, 0xae000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 29.902] (II) Open ACPI successful (/var/run/acpid.socket)
[ 29.902] (II) LoadModule: "extmod"
[ 29.960] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 29.960] (II) Module extmod: vendor="X.Org Foundation"
[ 29.960] compiled for 1.10.4, module version = 1.0.0
[ 29.960] Module class: X.Org Server Extension
[ 29.960] ABI class: X.Org Server Extension, version 5.0
[ 29.960] (II) Loading extension SELinux
[ 29.960] (II) Loading extension MIT-SCREEN-SAVER
[ 29.960] (II) Loading extension XFree86-VidModeExtension
[ 29.960] (II) Loading extension XFree86-DGA
[ 29.961] (II) Loading extension DPMS
[ 29.961] (II) Loading extension XVideo
[ 29.961] (II) Loading extension XVideo-MotionCompensation
[ 29.961] (II) Loading extension X-Resource
[ 29.961] (II) LoadModule: "dbe"
[ 29.961] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 29.961] (II) Module dbe: vendor="X.Org Foundation"
[ 29.961] compiled for 1.10.4, module version = 1.0.0
[ 29.961] Module class: X.Org Server Extension
[ 29.961] ABI class: X.Org Server Extension, version 5.0
[ 29.961] (II) Loading extension DOUBLE-BUFFER
[ 29.961] (II) LoadModule: "glx"
[ 29.961] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 29.961] (II) Module glx: vendor="X.Org Foundation"
[ 29.961] compiled for 1.10.4, module version = 1.0.0
[ 29.961] ABI class: X.Org Server Extension, version 5.0
[ 29.961] (==) AIGLX enabled
[ 29.961] (II) Loading extension GLX
[ 29.961] (II) LoadModule: "record"
[ 29.961] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 29.961] (II) Module record: vendor="X.Org Foundation"
[ 29.961] compiled for 1.10.4, module version = 1.13.0
[ 29.961] Module class: X.Org Server Extension
[ 29.961] ABI class: X.Org Server Extension, version 5.0
[ 29.961] (II) Loading extension RECORD
[ 29.961] (II) LoadModule: "dri"
[ 29.961] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 29.962] (II) Module dri: vendor="X.Org Foundation"
[ 29.962] compiled for 1.10.4, module version = 1.0.0
[ 29.962] ABI class: X.Org Server Extension, version 5.0
[ 29.962] (II) Loading extension XFree86-DRI
[ 29.962] (II) LoadModule: "dri2"
[ 29.962] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 29.962] (II) Module dri2: vendor="X.Org Foundation"
[ 29.962] compiled for 1.10.4, module version = 1.2.0
[ 29.962] ABI class: X.Org Server Extension, version 5.0
[ 29.962] (II) Loading extension DRI2
[ 29.962] (==) Matched intel as autoconfigured driver 0
[ 29.962] (==) Matched vesa as autoconfigured driver 1
[ 29.962] (==) Matched fbdev as autoconfigured driver 2
[ 29.962] (==) Assigned the driver to the xf86ConfigLayout
[ 29.962] (II) LoadModule: "intel"
[ 29.962] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 29.962] (II) Module intel: vendor="X.Org Foundation"
[ 29.962] compiled for 1.10.4, module version = 2.15.0
[ 29.962] Module class: X.Org Video Driver
[ 29.962] ABI class: X.Org Video Driver, version 10.0
[ 29.962] (II) LoadModule: "vesa"
[ 29.962] (WW) Warning, couldn't open module vesa
[ 29.962] (II) UnloadModule: "vesa"
[ 29.962] (II) Unloading vesa
[ 29.963] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 29.963] (II) LoadModule: "fbdev"
[ 29.963] (WW) Warning, couldn't open module fbdev
[ 29.963] (II) UnloadModule: "fbdev"
[ 29.963] (II) Unloading fbdev
[ 29.963] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 29.963] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 29.963] (++) using VT number 7
[ 29.969] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 29.969] drmOpenDevice: node name is /dev/dri/card0
[ 29.969] drmOpenDevice: open result is 9, (OK)
[ 29.969] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 29.969] drmOpenDevice: node name is /dev/dri/card0
[ 29.969] drmOpenDevice: open result is 9, (OK)
[ 29.969] drmOpenByBusid: drmOpenMinor returns 9
[ 29.969] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 29.969] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 29.969] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 29.969] (==) intel(0): RGB weight 888
[ 29.969] (==) intel(0): Default visual is TrueColor
[ 29.969] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 29.969] (--) intel(0): Chipset: "Arrandale"
[ 29.969] (**) intel(0): Relaxed fencing enabled
[ 29.969] (**) intel(0): Framebuffer tiled
[ 29.969] (**) intel(0): Pixmaps tiled
[ 29.969] (**) intel(0): 3D buffers tiled
[ 29.969] (**) intel(0): SwapBuffers wait enabled
[ 29.969] (==) intel(0): video overlay key set to 0x101fe
[ 29.969] (II) intel(0): Output LVDS1 has no monitor section
[ 29.969] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[ 29.969] (II) intel(0): Output VGA1 has no monitor section
[ 29.969] (II) intel(0): EDID for output LVDS1
[ 29.969] (II) intel(0): Manufacturer: AUO Model: 402c Serial#: 0
[ 29.970] (II) intel(0): Year: 2010 Week: 0
[ 29.970] (II) intel(0): EDID Version: 1.3
[ 29.970] (II) intel(0): Digital Display Input
[ 29.970] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 29.970] (II) intel(0): Gamma: 2.20
[ 29.970] (II) intel(0): No DPMS capabilities specified
[ 29.970] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 29.970] (II) intel(0): First detailed timing is preferred mode
[ 29.970] (II) intel(0): redX: 0.590 redY: 0.345 greenX: 0.325 greenY: 0.540
[ 29.970] (II) intel(0): blueX: 0.150 blueY: 0.145 whiteX: 0.313 whiteY: 0.329
[ 29.970] (II) intel(0): Manufacturer's mask: 0
[ 29.970] (II) intel(0): Supported detailed timing:
[ 29.970] (II) intel(0): clock: 69.3 MHz Image Size: 293 x 164 mm
[ 29.970] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1456 h_border: 0
[ 29.970] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 793 v_border: 0
[ 29.970] (II) intel(0): Unknown vendor-specific block f
[ 29.970] (II) intel(0): AUO
[ 29.970] (II) intel(0): B133XW04 V0
[ 29.970] (II) intel(0): EDID (in hex):
[ 29.970] (II) intel(0): 00ffffffffffff0006af2c4000000000
[ 29.970] (II) intel(0): 00140103801d10780a15859758538a26
[ 29.970] (II) intel(0): 25505400000001010101010101010101
[ 29.970] (II) intel(0): 010101010101121b565a500019303020
[ 29.970] (II) intel(0): 360025a4100000180000000f00000000
[ 29.970] (II) intel(0): 00000000000000000020000000fe0041
[ 29.970] (II) intel(0): 554f0a202020202020202020000000fe
[ 29.970] (II) intel(0): 004231333358573034205630200a0056
[ 29.970] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 29.970] (II) intel(0): Printing DDC gathered Modelines:
[ 29.970] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 29.970] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 29.970] (II) intel(0): Printing probed modes for output LVDS1
[ 29.970] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 29.970] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 29.970] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 29.970] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 29.970] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 29.970] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 29.970] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 29.970] (II) intel(0): EDID for output VGA1
[ 29.970] (II) intel(0): Output LVDS1 connected
[ 29.970] (II) intel(0): Output VGA1 disconnected
[ 29.970] (II) intel(0): Using exact sizes for initial modes
[ 29.970] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 29.970] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 29.970] (II) intel(0): Kernel page flipping support detected, enabling
[ 29.970] (**) intel(0): Display dimensions: (290, 160) mm
[ 29.970] (**) intel(0): DPI set to (119, 121)
[ 29.970] (II) Loading sub module "fb"
[ 29.970] (II) LoadModule: "fb"
[ 29.971] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29.971] (II) Module fb: vendor="X.Org Foundation"
[ 29.971] compiled for 1.10.4, module version = 1.0.0
[ 29.971] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.971] (II) Loading sub module "dri2"
[ 29.971] (II) LoadModule: "dri2"
[ 29.971] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 29.971] (II) Module dri2: vendor="X.Org Foundation"
[ 29.971] compiled for 1.10.4, module version = 1.2.0
[ 29.971] ABI class: X.Org Server Extension, version 5.0
[ 29.971] (==) Depth 24 pixmap format is 32 bpp
[ 29.971] (II) intel(0): [DRI2] Setup complete
[ 29.971] (II) intel(0): [DRI2] DRI driver: i965
[ 29.971] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 29.978] (II) UXA(0): Driver registered support for the following operations:
[ 29.978] (II) solid
[ 29.978] (II) copy
[ 29.978] (II) composite (RENDER acceleration)
[ 29.979] (II) put_image
[ 29.979] (II) get_image
[ 29.979] (==) intel(0): Backing store disabled
[ 29.979] (==) intel(0): Silken mouse enabled
[ 29.979] (II) intel(0): Initializing HW Cursor
[ 30.040] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 30.040] (==) intel(0): DPMS enabled
[ 30.040] (==) intel(0): Intel XvMC decoder enabled
[ 30.040] (II) intel(0): Set up textured video
[ 30.040] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 30.040] (II) intel(0): direct rendering: DRI2 Enabled
[ 30.040] (==) intel(0): hotplug detection: "enabled"
[ 30.040] (--) RandR disabled
[ 30.040] (II) Initializing built-in extension Generic Event Extension
[ 30.040] (II) Initializing built-in extension SHAPE
[ 30.041] (II) Initializing built-in extension MIT-SHM
[ 30.041] (II) Initializing built-in extension XInputExtension
[ 30.041] (II) Initializing built-in extension XTEST
[ 30.041] (II) Initializing built-in extension BIG-REQUESTS
[ 30.041] (II) Initializing built-in extension SYNC
[ 30.041] (II) Initializing built-in extension XKEYBOARD
[ 30.041] (II) Initializing built-in extension XC-MISC
[ 30.041] (II) Initializing built-in extension SECURITY
[ 30.041] (II) Initializing built-in extension XINERAMA
[ 30.041] (II) Initializing built-in extension XFIXES
[ 30.041] (II) Initializing built-in extension RENDER
[ 30.041] (II) Initializing built-in extension RANDR
[ 30.041] (II) Initializing built-in extension COMPOSITE
[ 30.041] (II) Initializing built-in extension DAMAGE
[ 30.041] (II) SELinux: Disabled on system
[ 30.050] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 30.050] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 30.050] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 30.050] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 30.050] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 30.050] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[ 30.050] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 30.051] (II) intel(0): Setting screen physical size to 361 x 203
[ 30.144] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 30.144] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.144] (II) LoadModule: "evdev"
[ 30.144] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.144] (II) Module evdev: vendor="X.Org Foundation"
[ 30.144] compiled for 1.10.3, module version = 2.6.0
[ 30.144] Module class: X.Org XInput Driver
[ 30.144] ABI class: X.Org XInput driver, version 12.2
[ 30.144] (II) Using input driver 'evdev' for 'Power Button'
[ 30.144] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.144] (**) Power Button: always reports core events
[ 30.144] (**) Power Button: Device: "/dev/input/event5"
[ 30.144] (--) Power Button: Found keys
[ 30.144] (II) Power Button: Configuring as keyboard
[ 30.144] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 30.144] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.144] (**) Option "xkb_rules" "evdev"
[ 30.144] (**) Option "xkb_model" "pc105"
[ 30.144] (**) Option "xkb_layout" "us"
[ 30.146] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 30.146] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.146] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.146] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.146] (**) Video Bus: always reports core events
[ 30.146] (**) Video Bus: Device: "/dev/input/event12"
[ 30.146] (--) Video Bus: Found keys
[ 30.146] (II) Video Bus: Configuring as keyboard
[ 30.146] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12/event12"
[ 30.146] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 30.146] (**) Option "xkb_rules" "evdev"
[ 30.146] (**) Option "xkb_model" "pc105"
[ 30.146] (**) Option "xkb_layout" "us"
[ 30.154] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 30.154] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.154] (II) Using input driver 'evdev' for 'Power Button'
[ 30.154] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.154] (**) Power Button: always reports core events
[ 30.154] (**) Power Button: Device: "/dev/input/event3"
[ 30.154] (--) Power Button: Found keys
[ 30.154] (II) Power Button: Configuring as keyboard
[ 30.154] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 30.154] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.154] (**) Option "xkb_rules" "evdev"
[ 30.154] (**) Option "xkb_model" "pc105"
[ 30.154] (**) Option "xkb_layout" "us"
[ 30.154] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 30.155] (II) No input driver/identifier specified (ignoring)
[ 30.155] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 30.155] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 30.155] (II) Using input driver 'evdev' for 'Sleep Button'
[ 30.155] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.155] (**) Sleep Button: always reports core events
[ 30.155] (**) Sleep Button: Device: "/dev/input/event4"
[ 30.155] (--) Sleep Button: Found keys
[ 30.155] (II) Sleep Button: Configuring as keyboard
[ 30.155] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[ 30.155] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 30.155] (**) Option "xkb_rules" "evdev"
[ 30.155] (**) Option "xkb_model" "pc105"
[ 30.155] (**) Option "xkb_layout" "us"
[ 30.157] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 30.157] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 30.157] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 30.157] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.157] (**) USB OPTICAL MOUSE: always reports core events
[ 30.157] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 30.157] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
[ 30.157] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
[ 30.157] (--) USB OPTICAL MOUSE: Found relative axes
[ 30.157] (--) USB OPTICAL MOUSE: Found x and y relative axes
[ 30.157] (II) USB OPTICAL MOUSE: Configuring as mouse
[ 30.157] (II) USB OPTICAL MOUSE: Adding scrollwheel support
[ 30.157] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 30.157] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.157] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1/event1"
[ 30.157] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE)
[ 30.157] (II) USB OPTICAL MOUSE: initialized for relative axes.
[ 30.157] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 30.157] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 30.157] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 30.157] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 30.157] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 30.157] (II) No input driver/identifier specified (ignoring)
[ 30.158] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[ 30.158] (II) No input driver/identifier specified (ignoring)
[ 30.159] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event14)
[ 30.159] (II) No input driver/identifier specified (ignoring)
[ 30.159] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event15)
[ 30.159] (II) No input driver/identifier specified (ignoring)
[ 30.161] (II) config/udev: Adding input device USB Gamepad (/dev/input/event6)
[ 30.161] (II) No input driver/identifier specified (ignoring)
[ 30.161] (II) config/udev: Adding input device USB Gamepad (/dev/input/js0)
[ 30.161] (II) No input driver/identifier specified (ignoring)
[ 30.161] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event11)
[ 30.161] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 30.161] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 30.161] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.161] (**) Lenovo EasyCamera: always reports core events
[ 30.161] (**) Lenovo EasyCamera: Device: "/dev/input/event11"
[ 30.161] (--) Lenovo EasyCamera: Found keys
[ 30.161] (II) Lenovo EasyCamera: Configuring as keyboard
[ 30.161] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input11/event11"
[ 30.161] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD)
[ 30.161] (**) Option "xkb_rules" "evdev"
[ 30.161] (**) Option "xkb_model" "pc105"
[ 30.161] (**) Option "xkb_layout" "us"
[ 30.165] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 30.165] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.165] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 30.165] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.165] (**) AT Translated Set 2 keyboard: always reports core events
[ 30.165] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 30.165] (--) AT Translated Set 2 keyboard: Found keys
[ 30.165] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 30.165] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 30.165] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 30.165] (**) Option "xkb_rules" "evdev"
[ 30.165] (**) Option "xkb_model" "pc105"
[ 30.165] (**) Option "xkb_layout" "us"
[ 30.165] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event10)
[ 30.165] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 30.165] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 30.165] (II) LoadModule: "synaptics"
[ 30.165] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 30.223] (II) Module synaptics: vendor="X.Org Foundation"
[ 30.223] compiled for 1.10.3, module version = 1.4.1
[ 30.223] Module class: X.Org XInput Driver
[ 30.223] ABI class: X.Org XInput driver, version 12.2
[ 30.223] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 30.223] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 30.223] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 30.223] (**) Option "Device" "/dev/input/event10"
[ 30.223] (--) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[ 30.223] (--) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[ 30.223] (--) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 30.223] (--) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 30.223] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
[ 30.223] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 30.223] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 30.224] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input10/event10"
[ 30.224] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
[ 30.224] (**) AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 30.224] (**) AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[ 30.224] (**) AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[ 30.224] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 30.224] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 30.224] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 30.224] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 30.225] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 30.225] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse2)
[ 30.225] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 30.225] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 30.225] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 30.225] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 30.225] (**) Option "Device" "/dev/input/mouse2"
[ 30.225] (--) AlpsPS/2 ALPS GlidePoint: invalid x-axis range. defaulting to 1615 - 5685
[ 30.225] (--) AlpsPS/2 ALPS GlidePoint: invalid y-axis range. defaulting to 1729 - 4171
[ 30.225] (--) AlpsPS/2 ALPS GlidePoint: invalid pressure range. defaulting to 0 - 256
[ 30.225] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
[ 30.245] (EE) Query no Synaptics: 6003C8
[ 30.245] (--) AlpsPS/2 ALPS GlidePoint: no supported touchpad found
[ 30.245] (EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize Synaptics hardware.
[ 30.257] (EE) PreInit returned 11 for "AlpsPS/2 ALPS GlidePoint"
[ 30.257] (II) UnloadModule: "synaptics"
[ 30.257] (II) Unloading synaptics
[ 30.257] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event9)
[ 30.257] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 30.257] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[ 30.257] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.257] (**) PS/2 Mouse: always reports core events
[ 30.257] (**) PS/2 Mouse: Device: "/dev/input/event9"
[ 30.257] (--) PS/2 Mouse: Found 3 mouse buttons
[ 30.257] (--) PS/2 Mouse: Found relative axes
[ 30.257] (--) PS/2 Mouse: Found x and y relative axes
[ 30.257] (II) PS/2 Mouse: Configuring as mouse
[ 30.257] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 30.257] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.257] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input9/event9"
[ 30.257] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
[ 30.258] (II) PS/2 Mouse: initialized for relative axes.
[ 30.258] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 30.258] (**) PS/2 Mouse: (accel) acceleration profile 0
[ 30.258] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[ 30.258] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[ 30.258] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse1)
[ 30.258] (II) No input driver/identifier specified (ignoring)
[ 30.258] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
[ 30.258] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 30.258] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[ 30.258] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.258] (**) Ideapad extra buttons: always reports core events
[ 30.258] (**) Ideapad extra buttons: Device: "/dev/input/event8"
[ 30.258] (--) Ideapad extra buttons: Found keys
[ 30.258] (II) Ideapad extra buttons: Configuring as keyboard
[ 30.258] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input8/event8"
[ 30.258] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD)
[ 30.258] (**) Option "xkb_rules" "evdev"
[ 30.258] (**) Option "xkb_model" "pc105"
[ 30.258] (**) Option "xkb_layout" "us"
[ 30.259] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 30.259] (II) No input driver/identifier specified (ignoring)
[ 30.262] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event16)
[ 30.262] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 30.262] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 30.262] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.262] (**) ACPI Virtual Keyboard Device: always reports core events
[ 30.262] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event16"
[ 30.262] (--) ACPI Virtual Keyboard Device: Found keys
[ 30.262] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[ 30.262] (**) Option "config_info" "udev:/sys/devices/virtual/input/input16/event16"
[ 30.262] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
[ 30.262] (**) Option "xkb_rules" "evdev"
[ 30.262] (**) Option "xkb_model" "pc105"
[ 30.262] (**) Option "xkb_layout" "us"
[ 31.285] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 31.285] (II) intel(0): Printing DDC gathered Modelines:
[ 31.285] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 31.287] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 31.287] (II) intel(0): Printing DDC gathered Modelines:
[ 31.287] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 31.308] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 31.308] (II) intel(0): Printing DDC gathered Modelines:
[ 31.308] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 48.013] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 48.013] (II) intel(0): Printing DDC gathered Modelines:
[ 48.013] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 48.015] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 48.015] (II) intel(0): Printing DDC gathered Modelines:
[ 48.015] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 48.016] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 48.016] (II) intel(0): Printing DDC gathered Modelines:
[ 48.016] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 50.814] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 50.814] (II) intel(0): Printing DDC gathered Modelines:
[ 50.814] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Lenovo G360: ALPS Touchpad Recognized as "PS/2 Generic Mouse"(with newly dmesg information)
2012-07-07 5:35 ` Bug#679750: " littlebat
@ 2012-07-09 14:45 ` Seth Forshee
2012-07-10 4:16 ` littlebat
0 siblings, 1 reply; 9+ messages in thread
From: Seth Forshee @ 2012-07-09 14:45 UTC (permalink / raw)
To: littlebat; +Cc: linux-input, 679750, jrnieder, rik.theys
On Sat, Jul 07, 2012 at 01:35:19PM +0800, littlebat wrote:
> Briefly, "proto_version" V4 with "command_mode_resp" 0x00, 0x01, 0x73,
> 0x0d and V3 with 0x0d, 0x73, show the almost same symptoms:
> 1, dmesg output:
> [ 19.105550] psmouse serio4: alps: E6 report: 00 00 64
> [ 19.130028] psmouse serio4: alps: E7 report: 73 03 50
> [ 19.149304] psmouse serio4: alps: unknown response while entering
> command mode: 73 01 0d
> mode
Okay, I don't suspect the v3/v4 protocol support is likely to work then.
> And, V2 or V1 with 0x8a or 0x00, show the almost same symptoms below:
> 1, dmesg output:
> [ 19.935069] psmouse serio4: alps: E6 report: 00 00 64
> [ 19.960457] psmouse serio4: alps: E7 report: 73 03 50
> [ 20.000732] psmouse serio4: alps: Status: 10 00 0a
...
> 4, There is touchpad tab in gnome mouse setting dialog, but the
> functions of "edge scrolling" and "disable touchpad when typing" still
> can't work even if I can setup them in touchpad tab in gnome mouse
> setting dialog.
The alps driver will detect and handle raw PS/2 mouse data, so what it
sounds like to me is that the alps driver manages to attach to your
device but doesn't get it sending absolute data packets. As a result the
driver is only passing relative motion data instead of absolute position
data, which means the touchpad is usable but still can't support any
touchpad features like edge scrolling.
So it sounds like we don't know how to talk to your touchpad, and
there's no trivial way to add support for it to the driver. There's
not really anything more I can do to help since I don't have access to
the hardware.
Seth
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Lenovo G360: ALPS Touchpad Recognized as "PS/2 Generic Mouse"(with newly dmesg information)
2012-07-09 14:45 ` Seth Forshee
@ 2012-07-10 4:16 ` littlebat
2012-07-10 4:57 ` Seth Forshee
0 siblings, 1 reply; 9+ messages in thread
From: littlebat @ 2012-07-10 4:16 UTC (permalink / raw)
To: Seth Forshee; +Cc: linux-input, 679750, jrnieder, rik.theys
On Mon, 9 Jul 2012 09:45:08 -0500
Seth Forshee <seth.forshee@canonical.com> wrote:
> So it sounds like we don't know how to talk to your touchpad, and
> there's no trivial way to add support for it to the driver. There's
> not really anything more I can do to help since I don't have access to
> the hardware.
Thanks.
Three things:
1, Can you provide a simple tutorial (or web page address) of how to
reverse-engineer a Linux ALPS driver if possible? I have very basic
programming knowledge(shell script, read basic C code except hardware
driver). Maybe, I can provide more detail hardware information about
this ALPS touchpad in this way?
2, Is there a tool, it can show the message when I operate on touchpad
edge scrolling? So, according to the output, it is able to get a dirty
solution about edge scrolling function of Lenovo G360 touchpad.
The funciton of "disable touchpad when typing" has a solution using
python script I have mentioned in the previous posts.
3, If you are interest in this and have time and it is helpful, I can
provide a root password for this laptop to you and run ssh service for
you all the time. Then you can operate this laptop via ssh connection
in this way. You can do anything on this machine even format the
disk :-)
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Lenovo G360: ALPS Touchpad Recognized as "PS/2 Generic Mouse"(with newly dmesg information)
2012-07-10 4:16 ` littlebat
@ 2012-07-10 4:57 ` Seth Forshee
2012-07-10 6:33 ` Rik Theys
2012-07-15 2:15 ` littlebat
0 siblings, 2 replies; 9+ messages in thread
From: Seth Forshee @ 2012-07-10 4:57 UTC (permalink / raw)
To: littlebat; +Cc: linux-input, 679750, jrnieder, rik.theys
On Tue, Jul 10, 2012 at 12:16:27PM +0800, littlebat wrote:
> 1, Can you provide a simple tutorial (or web page address) of how to
> reverse-engineer a Linux ALPS driver if possible? I have very basic
> programming knowledge(shell script, read basic C code except hardware
> driver). Maybe, I can provide more detail hardware information about
> this ALPS touchpad in this way?
I did a write-up a while back about how I did it.
http://swapspace.forshee.me/2011/11/touchpad-protocol-reverse-engineering.html
> 2, Is there a tool, it can show the message when I operate on touchpad
> edge scrolling? So, according to the output, it is able to get a dirty
> solution about edge scrolling function of Lenovo G360 touchpad.
> The funciton of "disable touchpad when typing" has a solution using
> python script I have mentioned in the previous posts.
I'm sorry, I can't quite tell what you're asking. If you're asking for a
way to enable edge scrolling without having a functioning touchpad
driver, I don't know of any. I doubt it's even possible to detect that
you're near the edge of the touchpad with only relative motion events.
> 3, If you are interest in this and have time and it is helpful, I can
> provide a root password for this laptop to you and run ssh service for
> you all the time. Then you can operate this laptop via ssh connection
> in this way. You can do anything on this machine even format the
> disk :-)
I'm afraid it's just not practical to do this remotely. Being able to
physically interact with the touchpad is pretty crucial.
Seth
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Lenovo G360: ALPS Touchpad Recognized as "PS/2 Generic Mouse"(with newly dmesg information)
2012-07-10 4:57 ` Seth Forshee
@ 2012-07-10 6:33 ` Rik Theys
2012-07-15 2:15 ` littlebat
1 sibling, 0 replies; 9+ messages in thread
From: Rik Theys @ 2012-07-10 6:33 UTC (permalink / raw)
To: Seth Forshee; +Cc: littlebat, linux-input, 679750, jrnieder
Hi Seth,
On Tue, Jul 10, 2012 at 6:57 AM, Seth Forshee
<seth.forshee@canonical.com> wrote:
> On Tue, Jul 10, 2012 at 12:16:27PM +0800, littlebat wrote:
>> 3, If you are interest in this and have time and it is helpful, I can
>> provide a root password for this laptop to you and run ssh service for
>> you all the time. Then you can operate this laptop via ssh connection
>> in this way. You can do anything on this machine even format the
>> disk :-)
>
> I'm afraid it's just not practical to do this remotely. Being able to
> physically interact with the touchpad is pretty crucial.
How long do you think you will need to reverse engineer the protocol
if you would have the hardware?
Depending on how long you think you might need, and how much it would
cost me to ship my laptop to you (where are you located?), would it
help if I simply ship my laptop to you?
I can't do that right now, but might be able to do that in a few months.
Regards,
Rik
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Lenovo G360: ALPS Touchpad Recognized as "PS/2 Generic Mouse"(with newly dmesg information)
2012-07-10 4:57 ` Seth Forshee
2012-07-10 6:33 ` Rik Theys
@ 2012-07-15 2:15 ` littlebat
2012-07-19 19:47 ` Seth Forshee
1 sibling, 1 reply; 9+ messages in thread
From: littlebat @ 2012-07-15 2:15 UTC (permalink / raw)
To: Seth Forshee; +Cc: linux-input, 679750, jrnieder, rik.theys
On Mon, 9 Jul 2012 23:57:14 -0500
Seth Forshee <seth.forshee@canonical.com> wrote:
> I did a write-up a while back about how I did it.
> http://swapspace.forshee.me/2011/11/touchpad-protocol-reverse-engineering.html
Hi,
I have done some testing on my Lenovo G360 Laptop according to the
instruction above, but it seems can't work as the instruction says.
Here is my steps:
1, Install Ubuntu 11.10 for i386 on laptop.
2, sudo apt-get update
3, sudo apt-get build-dep virtualbox
4, sudo apt-get source virtualbox (download
virtualbox_4.1.2-dfsg-1ubuntu1 source into home folder)
5, Applied the virtualbox patch "vbox-psmouse-serio-passthrough.patch"
downloaded from instruction page
6, sudo apt-get -b source virtualbox (this will compile patched source
and generate several deb virtualbox packages into home folder)
7, sudo dpkg -i virtualbox_4.1.2-dfsg-1ubuntu1_i386.deb
virtualbox-dbg_4.1.2-dfsg-1ubuntu1_i386.deb
virtualbox-dkms_4.1.2-dfsg-1ubuntu1_all.deb
virtualbox-fuse_4.1.2-dfsg-1ubuntu1_i386.deb
virtualbox-qt_4.1.2-dfsg-1ubuntu1_i386.deb (install generated
virtualbox packages)
8, Installed Windows 7 (or Windows xp SP2, has the
almost same testing result) into VirtualBox virtual machine.
9, Installed Touchpad driver in Windows 7 in VirtualBox virtual machine.
But, the touchpad still act as a normal ps/2 mouse in Windows in
virtual machine, it misses edge scrolling function although has
installed windows touchpad driver successfully.
10, Do the test:
y@y-PC:~$ sudo ./psmouse-reverse/mouse-to-serio.sh 1
y@y-PC:~$ sudo chmod 666 /dev/serio_raw0
y@y-PC:~$ ls -la /dev/serio*
crw-rw-rw- 1 root root 10, 55 2012-07-14 07:40 /dev/serio_raw0
y@y-PC:~ $ export PSMOUSE_SERIO_DEV_PATH="/dev/serio_raw0"
y@y-PC:~$ export
PSMOUSE_SERIO_LOG_PATH="/home/y/psmouse-reverse/reverse.log"
y@y-PC:~$ virtualbox --startvm w7 ("w7" is my VirtualBox virtual
machine Windows 7 guest OS name)
In the Windows 7 guest OS, the touchpad "Lenovo pointing device"
disappeared from the hardwares list. And, the log file in Ubuntu 11.10
has the content below:
y@y-PC:~$ cat ./psmouse-reverse/reverse.log
S ff
R fe
S ff
R fe
S ff
R fe
S ed
R fe
Then, restart Windows 7 guest OS without the environment variables
"PSMOUSE_SERIO_DEV_PATH", "PSMOUSE_SERIO_LOG_PATH", the touchpad
"Lenovo pointing device" appeared in the Windows 7 guest OS hardwares
list. I replaced touchpad "Lenovo pointing device" driver with normal
"Microsoft PS/2 Mouse" driver. Restart Windows 7 guest OS, I can see
"Microsoft PS/2 Mouse" in the hardwares list.
Then, empty the log file "./psmouse-reverse/reverse.log", set
"PSMOUSE_SERIO_DEV_PATH", "PSMOUSE_SERIO_LOG_PATH" environment
variables and restart Windows 7 guest OS.
In the Windows 7 guest OS, "Microsoft PS/2 Mouse" disappeared from the
hardwares list. And, the log file in Ubuntu 11.10 has the content
below:
y@y-PC:~$ cat ./psmouse-reverse/reverse.log
S ff
R fe
S ff
R fe
S ff
R fe
S ed
R fe
Note, the content of the log file is same as when enable "Lenovo
pointing device" touchpad driver. And, when enable environment
variables, under VirtualBox Windows 7 guest OS, although the device
"Lenovo pointing device" or "Microsoft PS/2 Mouse" disappeared from the
hardwares list, the touchpad can still work as a normal PS/2 mouse in
the Windows 7. But, when I operate touchpad under Windows 7 guest OS,
there isn't any other bit wrote into the log file
"./psmouse-reverse/reverse.log". Only when start virtualbox machine
Windows guest OS, the log file will be written the same eight lines as
above.
I have alse tested "qemu-kvm_0.14.1+noroms-0ubuntu6" with Windows XP
SP2 guest OS installed, the result is same except two points:
1, When I start guest OS without environment variables, the terminal
output as below:
y@y-PC:~$ qemu -m 1024 ./QEMU/wxp.img
open /dev/kvm: No such file or directory Could not initialize KVM, will
disable KVM support
qemu: ps2 mouse init
qemu: serio_pt_init
qemu: No serio device specified in environment
qemu: pci_add_option_rom: failed to find romfile "pxe-rtl8139.bin"
And, when start it with environment variables set, the terminal output
as below:
y@y-PC:~$ qemu -m 1024 ./QEMU/wxp.img
open /dev/kvm: No such file or directory
Could not initialize KVM, will disable KVM support
qemu: ps2 mouse init
qemu: serio_pt_init
qemu: pci_add_option_rom: failed to find romfile "pxe-rtl8139.bin"
2, When start qemu windows xp sp2 guest OS with environment variables
set, unlike in the virtualbox Windows guest OS, the touchpad and USB
mouse can't work in the qemu windows xp sp2 guest OS, the cursor can't
move.
Briefly, it seems the instruction at
"http://swapspace.forshee.me/2011/11/touchpad-protocol-reverse-engineering.html"
can't work on my Lenovo G360, is there any thing wrong with me?
Thanks.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Lenovo G360: ALPS Touchpad Recognized as "PS/2 Generic Mouse"(with newly dmesg information)
2012-07-15 2:15 ` littlebat
@ 2012-07-19 19:47 ` Seth Forshee
0 siblings, 0 replies; 9+ messages in thread
From: Seth Forshee @ 2012-07-19 19:47 UTC (permalink / raw)
To: littlebat; +Cc: linux-input, 679750, jrnieder, rik.theys
On Sun, Jul 15, 2012 at 10:15:57AM +0800, littlebat wrote:
> In the Windows 7 guest OS, the touchpad "Lenovo pointing device"
> disappeared from the hardwares list. And, the log file in Ubuntu 11.10
> has the content below:
> y@y-PC:~$ cat ./psmouse-reverse/reverse.log
> S ff
> R fe
> S ff
> R fe
> S ff
> R fe
> S ed
> R fe
>From the outset this doesn't look right. When reset is sent (0xff) the
touchpad should respond with and acknowledge (0xfa) and a couple more
bytes. Something obviously isn't working right, but I'm not sure what.
The only suggestion I have is to start debugging and try to see what's
going wrong. Is the data from the guest OS getting to the hardware okay,
and vice versa? Are you sure you've got the correct device?
Seth
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2012-07-19 19:47 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-07-06 3:39 Bug#679750: Lenovo G360: ALPS Touchpad Recognized as "PS/2 Generic Mouse"(with newly dmesg information) littlebat
2012-07-06 5:11 ` Seth Forshee
2012-07-07 5:35 ` Bug#679750: " littlebat
2012-07-09 14:45 ` Seth Forshee
2012-07-10 4:16 ` littlebat
2012-07-10 4:57 ` Seth Forshee
2012-07-10 6:33 ` Rik Theys
2012-07-15 2:15 ` littlebat
2012-07-19 19:47 ` Seth Forshee
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.