All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH RFC] [media] adv7180.c: convert to v4l2 control framework
@ 2012-07-11  2:34 Federico Vaga
  2012-07-11  6:34 ` Hans Verkuil
  0 siblings, 1 reply; 6+ messages in thread
From: Federico Vaga @ 2012-07-11  2:34 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Giancarlo Asnaghi, linux-media, linux-kernel, Hans Verkuil,
	Federico Vaga

Signed-off-by: Federico Vaga <federico.vaga@gmail.com>
---
 drivers/media/video/adv7180.c |  221 +++++++++++++++++------------------------
 1 file changed, 90 insertions(+), 131 deletions(-)

diff --git a/drivers/media/video/adv7180.c b/drivers/media/video/adv7180.c
index 174bffa..7705456 100644
--- a/drivers/media/video/adv7180.c
+++ b/drivers/media/video/adv7180.c
@@ -26,11 +26,10 @@
 #include <media/v4l2-ioctl.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
 #include <media/v4l2-chip-ident.h>
 #include <linux/mutex.h>
 
-#define DRIVER_NAME "adv7180"
-
 #define ADV7180_INPUT_CONTROL_REG			0x00
 #define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM	0x00
 #define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM_PED 0x10
@@ -55,21 +54,21 @@
 
 #define ADV7180_AUTODETECT_ENABLE_REG			0x07
 #define ADV7180_AUTODETECT_DEFAULT			0x7f
-
+/* Contrast */
 #define ADV7180_CON_REG		0x08	/*Unsigned */
-#define CON_REG_MIN		0
-#define CON_REG_DEF		128
-#define CON_REG_MAX		255
-
+#define ADV7180_CON_MIN		0
+#define ADV7180_CON_DEF		128
+#define ADV7180_CON_MAX		255
+/* Brightness*/
 #define ADV7180_BRI_REG		0x0a	/*Signed */
-#define BRI_REG_MIN		-128
-#define BRI_REG_DEF		0
-#define BRI_REG_MAX		127
-
+#define ADV7180_BRI_MIN		-128
+#define ADV7180_BRI_DEF		0
+#define ADV7180_BRI_MAX		127
+/* Hue */
 #define ADV7180_HUE_REG		0x0b	/*Signed, inverted */
-#define HUE_REG_MIN		-127
-#define HUE_REG_DEF		0
-#define HUE_REG_MAX		128
+#define ADV7180_HUE_MIN		-127
+#define ADV7180_HUE_DEF		0
+#define ADV7180_HUE_MAX		128
 
 #define ADV7180_ADI_CTRL_REG				0x0e
 #define ADV7180_ADI_CTRL_IRQ_SPACE			0x20
@@ -98,12 +97,12 @@
 #define ADV7180_ICONF1_ACTIVE_LOW	0x01
 #define ADV7180_ICONF1_PSYNC_ONLY	0x10
 #define ADV7180_ICONF1_ACTIVE_TO_CLR	0xC0
-
+/* Saturation */
 #define ADV7180_SD_SAT_CB_REG	0xe3	/*Unsigned */
 #define ADV7180_SD_SAT_CR_REG	0xe4	/*Unsigned */
-#define SAT_REG_MIN		0
-#define SAT_REG_DEF		128
-#define SAT_REG_MAX		255
+#define ADV7180_SAT_MIN		0
+#define ADV7180_SAT_DEF		128
+#define ADV7180_SAT_MAX		255
 
 #define ADV7180_IRQ1_LOCK	0x01
 #define ADV7180_IRQ1_UNLOCK	0x02
@@ -121,18 +120,18 @@
 #define ADV7180_NTSC_V_BIT_END_MANUAL_NVEND	0x4F
 
 struct adv7180_state {
+	struct v4l2_ctrl_handler ctrl_hdl;
 	struct v4l2_subdev	sd;
 	struct work_struct	work;
 	struct mutex		mutex; /* mutual excl. when accessing chip */
 	int			irq;
 	v4l2_std_id		curr_norm;
 	bool			autodetect;
-	s8			brightness;
-	s16			hue;
-	u8			contrast;
-	u8			saturation;
 	u8			input;
 };
+#define to_adv7180_sd(_ctrl) &container_of(_ctrl->handler,		\
+					   struct adv7180_state,	\
+					   ctrl_hdl)->sd
 
 static v4l2_std_id adv7180_std_to_v4l2(u8 status1)
 {
@@ -237,7 +236,7 @@ static int adv7180_s_routing(struct v4l2_subdev *sd, u32 input,
 	if (ret)
 		return ret;
 
-	/*We cannot discriminate between LQFP and 40-pin LFCSP, so accept
+	/* We cannot discriminate between LQFP and 40-pin LFCSP, so accept
 	 * all inputs and let the card driver take care of validation
 	 */
 	if ((input & ADV7180_INPUT_CONTROL_INSEL_MASK) != input)
@@ -316,117 +315,39 @@ out:
 	return ret;
 }
 
-static int adv7180_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
-	switch (qc->id) {
-	case V4L2_CID_BRIGHTNESS:
-		return v4l2_ctrl_query_fill(qc, BRI_REG_MIN, BRI_REG_MAX,
-					    1, BRI_REG_DEF);
-	case V4L2_CID_HUE:
-		return v4l2_ctrl_query_fill(qc, HUE_REG_MIN, HUE_REG_MAX,
-					    1, HUE_REG_DEF);
-	case V4L2_CID_CONTRAST:
-		return v4l2_ctrl_query_fill(qc, CON_REG_MIN, CON_REG_MAX,
-					    1, CON_REG_DEF);
-	case V4L2_CID_SATURATION:
-		return v4l2_ctrl_query_fill(qc, SAT_REG_MIN, SAT_REG_MAX,
-					    1, SAT_REG_DEF);
-	default:
-		break;
-	}
-
-	return -EINVAL;
-}
-
-static int adv7180_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct adv7180_state *state = to_state(sd);
-	int ret = mutex_lock_interruptible(&state->mutex);
-	if (ret)
-		return ret;
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		ctrl->value = state->brightness;
-		break;
-	case V4L2_CID_HUE:
-		ctrl->value = state->hue;
-		break;
-	case V4L2_CID_CONTRAST:
-		ctrl->value = state->contrast;
-		break;
-	case V4L2_CID_SATURATION:
-		ctrl->value = state->saturation;
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	mutex_unlock(&state->mutex);
-	return ret;
-}
-
-static int adv7180_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int adv7180_s_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct v4l2_subdev *sd = to_adv7180_sd(ctrl);
 	struct adv7180_state *state = to_state(sd);
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	int ret = mutex_lock_interruptible(&state->mutex);
+	int val;
+
 	if (ret)
 		return ret;
-
+	val = ctrl->val;
 	switch (ctrl->id) {
 	case V4L2_CID_BRIGHTNESS:
-		if ((ctrl->value > BRI_REG_MAX)
-		    || (ctrl->value < BRI_REG_MIN)) {
-			ret = -ERANGE;
-			break;
-		}
-		state->brightness = ctrl->value;
-		ret = i2c_smbus_write_byte_data(client,
-						ADV7180_BRI_REG,
-						state->brightness);
+		ret = i2c_smbus_write_byte_data(client, ADV7180_BRI_REG, val);
 		break;
 	case V4L2_CID_HUE:
-		if ((ctrl->value > HUE_REG_MAX)
-		    || (ctrl->value < HUE_REG_MIN)) {
-			ret = -ERANGE;
-			break;
-		}
-		state->hue = ctrl->value;
 		/*Hue is inverted according to HSL chart */
-		ret = i2c_smbus_write_byte_data(client,
-						ADV7180_HUE_REG, -state->hue);
+		ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG, -val);
 		break;
 	case V4L2_CID_CONTRAST:
-		if ((ctrl->value > CON_REG_MAX)
-		    || (ctrl->value < CON_REG_MIN)) {
-			ret = -ERANGE;
-			break;
-		}
-		state->contrast = ctrl->value;
-		ret = i2c_smbus_write_byte_data(client,
-						ADV7180_CON_REG,
-						state->contrast);
+		ret = i2c_smbus_write_byte_data(client, ADV7180_CON_REG, val);
 		break;
 	case V4L2_CID_SATURATION:
-		if ((ctrl->value > SAT_REG_MAX)
-		    || (ctrl->value < SAT_REG_MIN)) {
-			ret = -ERANGE;
-			break;
-		}
 		/*
 		 *This could be V4L2_CID_BLUE_BALANCE/V4L2_CID_RED_BALANCE
 		 *Let's not confuse the user, everybody understands saturation
 		 */
-		state->saturation = ctrl->value;
-		ret = i2c_smbus_write_byte_data(client,
-						ADV7180_SD_SAT_CB_REG,
-						state->saturation);
+		ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CB_REG,
+						val);
 		if (ret < 0)
 			break;
-		ret = i2c_smbus_write_byte_data(client,
-						ADV7180_SD_SAT_CR_REG,
-						state->saturation);
+		ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CR_REG,
+						val);
 		break;
 	default:
 		ret = -EINVAL;
@@ -436,6 +357,42 @@ static int adv7180_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	return ret;
 }
 
+static const struct v4l2_ctrl_ops adv7180_ctrl_ops = {
+	.s_ctrl = adv7180_s_ctrl,
+};
+
+static int adv7180_init_controls(struct adv7180_state *state)
+{
+	v4l2_ctrl_handler_init(&state->ctrl_hdl, 2);
+
+	v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
+			  V4L2_CID_BRIGHTNESS, ADV7180_BRI_MIN,
+			  ADV7180_BRI_MAX, 1, ADV7180_BRI_DEF);
+	v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
+			  V4L2_CID_CONTRAST, ADV7180_CON_MIN,
+			  ADV7180_CON_MAX, 1, ADV7180_CON_DEF);
+	v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
+			  V4L2_CID_SATURATION, ADV7180_SAT_MIN,
+			  ADV7180_SAT_MAX, 1, ADV7180_SAT_DEF);
+	v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
+			  V4L2_CID_HUE, ADV7180_HUE_MIN,
+			  ADV7180_HUE_MAX, 1, ADV7180_HUE_DEF);
+	state->sd.ctrl_handler = &state->ctrl_hdl;
+	if (state->ctrl_hdl.error) {
+		int err = state->ctrl_hdl.error;
+
+		v4l2_ctrl_handler_free(&state->ctrl_hdl);
+		return err;
+	}
+	v4l2_ctrl_handler_setup(&state->ctrl_hdl);
+
+	return 0;
+}
+static void adv7180_exit_controls(struct adv7180_state *state)
+{
+	v4l2_ctrl_handler_free(&state->ctrl_hdl);
+}
+
 static const struct v4l2_subdev_video_ops adv7180_video_ops = {
 	.querystd = adv7180_querystd,
 	.g_input_status = adv7180_g_input_status,
@@ -445,9 +402,9 @@ static const struct v4l2_subdev_video_ops adv7180_video_ops = {
 static const struct v4l2_subdev_core_ops adv7180_core_ops = {
 	.g_chip_ident = adv7180_g_chip_ident,
 	.s_std = adv7180_s_std,
-	.queryctrl = adv7180_queryctrl,
-	.g_ctrl = adv7180_g_ctrl,
-	.s_ctrl = adv7180_s_ctrl,
+	.queryctrl = v4l2_subdev_queryctrl,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
 };
 
 static const struct v4l2_subdev_ops adv7180_ops = {
@@ -539,7 +496,7 @@ static int init_device(struct i2c_client *client, struct adv7180_state *state)
 
 	/* register for interrupts */
 	if (state->irq > 0) {
-		ret = request_irq(state->irq, adv7180_irq, 0, DRIVER_NAME,
+		ret = request_irq(state->irq, adv7180_irq, 0, KBUILD_MODNAME,
 				  state);
 		if (ret)
 			return ret;
@@ -582,26 +539,27 @@ static int init_device(struct i2c_client *client, struct adv7180_state *state)
 
 	/*Set default value for controls */
 	ret = i2c_smbus_write_byte_data(client, ADV7180_BRI_REG,
-					state->brightness);
+					ADV7180_BRI_DEF);
 	if (ret < 0)
 		return ret;
 
-	ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG, state->hue);
+	ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG,
+					ADV7180_HUE_DEF);
 	if (ret < 0)
 		return ret;
 
 	ret = i2c_smbus_write_byte_data(client, ADV7180_CON_REG,
-					state->contrast);
+					ADV7180_CON_DEF);
 	if (ret < 0)
 		return ret;
 
 	ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CB_REG,
-					state->saturation);
+					ADV7180_SAT_DEF);
 	if (ret < 0)
 		return ret;
 
 	ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CR_REG,
-					state->saturation);
+					ADV7180_SAT_DEF);
 	if (ret < 0)
 		return ret;
 
@@ -632,25 +590,26 @@ static __devinit int adv7180_probe(struct i2c_client *client,
 	INIT_WORK(&state->work, adv7180_work);
 	mutex_init(&state->mutex);
 	state->autodetect = true;
-	state->brightness = BRI_REG_DEF;
-	state->hue = HUE_REG_DEF;
-	state->contrast = CON_REG_DEF;
-	state->saturation = SAT_REG_DEF;
 	state->input = 0;
 	sd = &state->sd;
 	v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
 
-	ret = init_device(client, state);
-	if (0 != ret)
+	ret = adv7180_init_controls(state);
+	if (ret)
 		goto err_unreg_subdev;
+	ret = init_device(client, state);
+	if (ret)
+		goto err_free_ctrl;
 	return 0;
 
+err_free_ctrl:
+	adv7180_exit_controls(state);
 err_unreg_subdev:
 	mutex_destroy(&state->mutex);
 	v4l2_device_unregister_subdev(sd);
 	kfree(state);
 err:
-	printk(KERN_ERR DRIVER_NAME ": Failed to probe: %d\n", ret);
+	printk(KERN_ERR KBUILD_MODNAME ": Failed to probe: %d\n", ret);
 	return ret;
 }
 
@@ -678,7 +637,7 @@ static __devexit int adv7180_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id adv7180_id[] = {
-	{DRIVER_NAME, 0},
+	{KBUILD_MODNAME, 0},
 	{},
 };
 
@@ -716,7 +675,7 @@ MODULE_DEVICE_TABLE(i2c, adv7180_id);
 static struct i2c_driver adv7180_driver = {
 	.driver = {
 		   .owner = THIS_MODULE,
-		   .name = DRIVER_NAME,
+		   .name = KBUILD_MODNAME,
 		   },
 	.probe = adv7180_probe,
 	.remove = __devexit_p(adv7180_remove),
-- 
1.7.10.4


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH RFC] [media] adv7180.c: convert to v4l2 control framework
  2012-07-11  2:34 [PATCH RFC] [media] adv7180.c: convert to v4l2 control framework Federico Vaga
@ 2012-07-11  6:34 ` Hans Verkuil
  2012-07-11 13:36   ` Federico Vaga
  0 siblings, 1 reply; 6+ messages in thread
From: Hans Verkuil @ 2012-07-11  6:34 UTC (permalink / raw)
  To: Federico Vaga
  Cc: Mauro Carvalho Chehab, Giancarlo Asnaghi, linux-media, linux-kernel

Hi Federico!

A few small remarks:

On Wed July 11 2012 04:34:46 Federico Vaga wrote:
> Signed-off-by: Federico Vaga <federico.vaga@gmail.com>
> ---
>  drivers/media/video/adv7180.c |  221 +++++++++++++++++------------------------
>  1 file changed, 90 insertions(+), 131 deletions(-)
> 
> diff --git a/drivers/media/video/adv7180.c b/drivers/media/video/adv7180.c
> index 174bffa..7705456 100644
> --- a/drivers/media/video/adv7180.c
> +++ b/drivers/media/video/adv7180.c
> @@ -26,11 +26,10 @@
>  #include <media/v4l2-ioctl.h>
>  #include <linux/videodev2.h>
>  #include <media/v4l2-device.h>
> +#include <media/v4l2-ctrls.h>
>  #include <media/v4l2-chip-ident.h>
>  #include <linux/mutex.h>
>  
> -#define DRIVER_NAME "adv7180"
> -
>  #define ADV7180_INPUT_CONTROL_REG			0x00
>  #define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM	0x00
>  #define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM_PED 0x10
> @@ -55,21 +54,21 @@
>  
>  #define ADV7180_AUTODETECT_ENABLE_REG			0x07
>  #define ADV7180_AUTODETECT_DEFAULT			0x7f
> -
> +/* Contrast */
>  #define ADV7180_CON_REG		0x08	/*Unsigned */
> -#define CON_REG_MIN		0
> -#define CON_REG_DEF		128
> -#define CON_REG_MAX		255
> -
> +#define ADV7180_CON_MIN		0
> +#define ADV7180_CON_DEF		128
> +#define ADV7180_CON_MAX		255
> +/* Brightness*/
>  #define ADV7180_BRI_REG		0x0a	/*Signed */
> -#define BRI_REG_MIN		-128
> -#define BRI_REG_DEF		0
> -#define BRI_REG_MAX		127
> -
> +#define ADV7180_BRI_MIN		-128
> +#define ADV7180_BRI_DEF		0
> +#define ADV7180_BRI_MAX		127
> +/* Hue */
>  #define ADV7180_HUE_REG		0x0b	/*Signed, inverted */
> -#define HUE_REG_MIN		-127
> -#define HUE_REG_DEF		0
> -#define HUE_REG_MAX		128
> +#define ADV7180_HUE_MIN		-127
> +#define ADV7180_HUE_DEF		0
> +#define ADV7180_HUE_MAX		128
>  
>  #define ADV7180_ADI_CTRL_REG				0x0e
>  #define ADV7180_ADI_CTRL_IRQ_SPACE			0x20
> @@ -98,12 +97,12 @@
>  #define ADV7180_ICONF1_ACTIVE_LOW	0x01
>  #define ADV7180_ICONF1_PSYNC_ONLY	0x10
>  #define ADV7180_ICONF1_ACTIVE_TO_CLR	0xC0
> -
> +/* Saturation */
>  #define ADV7180_SD_SAT_CB_REG	0xe3	/*Unsigned */
>  #define ADV7180_SD_SAT_CR_REG	0xe4	/*Unsigned */
> -#define SAT_REG_MIN		0
> -#define SAT_REG_DEF		128
> -#define SAT_REG_MAX		255
> +#define ADV7180_SAT_MIN		0
> +#define ADV7180_SAT_DEF		128
> +#define ADV7180_SAT_MAX		255
>  
>  #define ADV7180_IRQ1_LOCK	0x01
>  #define ADV7180_IRQ1_UNLOCK	0x02
> @@ -121,18 +120,18 @@
>  #define ADV7180_NTSC_V_BIT_END_MANUAL_NVEND	0x4F
>  
>  struct adv7180_state {
> +	struct v4l2_ctrl_handler ctrl_hdl;
>  	struct v4l2_subdev	sd;
>  	struct work_struct	work;
>  	struct mutex		mutex; /* mutual excl. when accessing chip */
>  	int			irq;
>  	v4l2_std_id		curr_norm;
>  	bool			autodetect;
> -	s8			brightness;
> -	s16			hue;
> -	u8			contrast;
> -	u8			saturation;
>  	u8			input;
>  };
> +#define to_adv7180_sd(_ctrl) &container_of(_ctrl->handler,		\
> +					   struct adv7180_state,	\
> +					   ctrl_hdl)->sd
>  
>  static v4l2_std_id adv7180_std_to_v4l2(u8 status1)
>  {
> @@ -237,7 +236,7 @@ static int adv7180_s_routing(struct v4l2_subdev *sd, u32 input,
>  	if (ret)
>  		return ret;
>  
> -	/*We cannot discriminate between LQFP and 40-pin LFCSP, so accept
> +	/* We cannot discriminate between LQFP and 40-pin LFCSP, so accept
>  	 * all inputs and let the card driver take care of validation
>  	 */
>  	if ((input & ADV7180_INPUT_CONTROL_INSEL_MASK) != input)
> @@ -316,117 +315,39 @@ out:
>  	return ret;
>  }
>  
> -static int adv7180_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
> -{
> -	switch (qc->id) {
> -	case V4L2_CID_BRIGHTNESS:
> -		return v4l2_ctrl_query_fill(qc, BRI_REG_MIN, BRI_REG_MAX,
> -					    1, BRI_REG_DEF);
> -	case V4L2_CID_HUE:
> -		return v4l2_ctrl_query_fill(qc, HUE_REG_MIN, HUE_REG_MAX,
> -					    1, HUE_REG_DEF);
> -	case V4L2_CID_CONTRAST:
> -		return v4l2_ctrl_query_fill(qc, CON_REG_MIN, CON_REG_MAX,
> -					    1, CON_REG_DEF);
> -	case V4L2_CID_SATURATION:
> -		return v4l2_ctrl_query_fill(qc, SAT_REG_MIN, SAT_REG_MAX,
> -					    1, SAT_REG_DEF);
> -	default:
> -		break;
> -	}
> -
> -	return -EINVAL;
> -}
> -
> -static int adv7180_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
> -{
> -	struct adv7180_state *state = to_state(sd);
> -	int ret = mutex_lock_interruptible(&state->mutex);
> -	if (ret)
> -		return ret;
> -
> -	switch (ctrl->id) {
> -	case V4L2_CID_BRIGHTNESS:
> -		ctrl->value = state->brightness;
> -		break;
> -	case V4L2_CID_HUE:
> -		ctrl->value = state->hue;
> -		break;
> -	case V4L2_CID_CONTRAST:
> -		ctrl->value = state->contrast;
> -		break;
> -	case V4L2_CID_SATURATION:
> -		ctrl->value = state->saturation;
> -		break;
> -	default:
> -		ret = -EINVAL;
> -	}
> -
> -	mutex_unlock(&state->mutex);
> -	return ret;
> -}
> -
> -static int adv7180_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
> +static int adv7180_s_ctrl(struct v4l2_ctrl *ctrl)
>  {
> +	struct v4l2_subdev *sd = to_adv7180_sd(ctrl);
>  	struct adv7180_state *state = to_state(sd);
>  	struct i2c_client *client = v4l2_get_subdevdata(sd);
>  	int ret = mutex_lock_interruptible(&state->mutex);
> +	int val;
> +
>  	if (ret)
>  		return ret;
> -
> +	val = ctrl->val;
>  	switch (ctrl->id) {
>  	case V4L2_CID_BRIGHTNESS:
> -		if ((ctrl->value > BRI_REG_MAX)
> -		    || (ctrl->value < BRI_REG_MIN)) {
> -			ret = -ERANGE;
> -			break;
> -		}
> -		state->brightness = ctrl->value;
> -		ret = i2c_smbus_write_byte_data(client,
> -						ADV7180_BRI_REG,
> -						state->brightness);
> +		ret = i2c_smbus_write_byte_data(client, ADV7180_BRI_REG, val);
>  		break;
>  	case V4L2_CID_HUE:
> -		if ((ctrl->value > HUE_REG_MAX)
> -		    || (ctrl->value < HUE_REG_MIN)) {
> -			ret = -ERANGE;
> -			break;
> -		}
> -		state->hue = ctrl->value;
>  		/*Hue is inverted according to HSL chart */
> -		ret = i2c_smbus_write_byte_data(client,
> -						ADV7180_HUE_REG, -state->hue);
> +		ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG, -val);
>  		break;
>  	case V4L2_CID_CONTRAST:
> -		if ((ctrl->value > CON_REG_MAX)
> -		    || (ctrl->value < CON_REG_MIN)) {
> -			ret = -ERANGE;
> -			break;
> -		}
> -		state->contrast = ctrl->value;
> -		ret = i2c_smbus_write_byte_data(client,
> -						ADV7180_CON_REG,
> -						state->contrast);
> +		ret = i2c_smbus_write_byte_data(client, ADV7180_CON_REG, val);
>  		break;
>  	case V4L2_CID_SATURATION:
> -		if ((ctrl->value > SAT_REG_MAX)
> -		    || (ctrl->value < SAT_REG_MIN)) {
> -			ret = -ERANGE;
> -			break;
> -		}
>  		/*
>  		 *This could be V4L2_CID_BLUE_BALANCE/V4L2_CID_RED_BALANCE
>  		 *Let's not confuse the user, everybody understands saturation
>  		 */
> -		state->saturation = ctrl->value;
> -		ret = i2c_smbus_write_byte_data(client,
> -						ADV7180_SD_SAT_CB_REG,
> -						state->saturation);
> +		ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CB_REG,
> +						val);
>  		if (ret < 0)
>  			break;
> -		ret = i2c_smbus_write_byte_data(client,
> -						ADV7180_SD_SAT_CR_REG,
> -						state->saturation);
> +		ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CR_REG,
> +						val);
>  		break;
>  	default:
>  		ret = -EINVAL;
> @@ -436,6 +357,42 @@ static int adv7180_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
>  	return ret;
>  }
>  
> +static const struct v4l2_ctrl_ops adv7180_ctrl_ops = {
> +	.s_ctrl = adv7180_s_ctrl,
> +};
> +
> +static int adv7180_init_controls(struct adv7180_state *state)
> +{
> +	v4l2_ctrl_handler_init(&state->ctrl_hdl, 2);

2 -> 4, since there are 4 controls. It's a hint only, but it helps optimizing
the internal hash data structure.

> +
> +	v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
> +			  V4L2_CID_BRIGHTNESS, ADV7180_BRI_MIN,
> +			  ADV7180_BRI_MAX, 1, ADV7180_BRI_DEF);
> +	v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
> +			  V4L2_CID_CONTRAST, ADV7180_CON_MIN,
> +			  ADV7180_CON_MAX, 1, ADV7180_CON_DEF);
> +	v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
> +			  V4L2_CID_SATURATION, ADV7180_SAT_MIN,
> +			  ADV7180_SAT_MAX, 1, ADV7180_SAT_DEF);
> +	v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
> +			  V4L2_CID_HUE, ADV7180_HUE_MIN,
> +			  ADV7180_HUE_MAX, 1, ADV7180_HUE_DEF);
> +	state->sd.ctrl_handler = &state->ctrl_hdl;
> +	if (state->ctrl_hdl.error) {
> +		int err = state->ctrl_hdl.error;
> +
> +		v4l2_ctrl_handler_free(&state->ctrl_hdl);
> +		return err;
> +	}
> +	v4l2_ctrl_handler_setup(&state->ctrl_hdl);
> +
> +	return 0;
> +}
> +static void adv7180_exit_controls(struct adv7180_state *state)
> +{
> +	v4l2_ctrl_handler_free(&state->ctrl_hdl);
> +}
> +
>  static const struct v4l2_subdev_video_ops adv7180_video_ops = {
>  	.querystd = adv7180_querystd,
>  	.g_input_status = adv7180_g_input_status,
> @@ -445,9 +402,9 @@ static const struct v4l2_subdev_video_ops adv7180_video_ops = {
>  static const struct v4l2_subdev_core_ops adv7180_core_ops = {
>  	.g_chip_ident = adv7180_g_chip_ident,
>  	.s_std = adv7180_s_std,
> -	.queryctrl = adv7180_queryctrl,
> -	.g_ctrl = adv7180_g_ctrl,
> -	.s_ctrl = adv7180_s_ctrl,
> +	.queryctrl = v4l2_subdev_queryctrl,
> +	.g_ctrl = v4l2_subdev_g_ctrl,
> +	.s_ctrl = v4l2_subdev_s_ctrl,

If adv7180 is currently *only* used by bridge/platform drivers that also use
the control framework, then you can remove queryctrl/g/s_ctrl altogether.

>  };
>  
>  static const struct v4l2_subdev_ops adv7180_ops = {
> @@ -539,7 +496,7 @@ static int init_device(struct i2c_client *client, struct adv7180_state *state)
>  
>  	/* register for interrupts */
>  	if (state->irq > 0) {
> -		ret = request_irq(state->irq, adv7180_irq, 0, DRIVER_NAME,
> +		ret = request_irq(state->irq, adv7180_irq, 0, KBUILD_MODNAME,
>  				  state);
>  		if (ret)
>  			return ret;
> @@ -582,26 +539,27 @@ static int init_device(struct i2c_client *client, struct adv7180_state *state)
>  
>  	/*Set default value for controls */
>  	ret = i2c_smbus_write_byte_data(client, ADV7180_BRI_REG,
> -					state->brightness);
> +					ADV7180_BRI_DEF);
>  	if (ret < 0)
>  		return ret;
>  
> -	ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG, state->hue);
> +	ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG,
> +					ADV7180_HUE_DEF);

It shouldn't be necessary to initialize the controls since v4l2_ctrl_handler_setup
does that for you already.

>  	if (ret < 0)
>  		return ret;
>  
>  	ret = i2c_smbus_write_byte_data(client, ADV7180_CON_REG,
> -					state->contrast);
> +					ADV7180_CON_DEF);
>  	if (ret < 0)
>  		return ret;
>  
>  	ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CB_REG,
> -					state->saturation);
> +					ADV7180_SAT_DEF);
>  	if (ret < 0)
>  		return ret;
>  
>  	ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CR_REG,
> -					state->saturation);
> +					ADV7180_SAT_DEF);
>  	if (ret < 0)
>  		return ret;
>  
> @@ -632,25 +590,26 @@ static __devinit int adv7180_probe(struct i2c_client *client,
>  	INIT_WORK(&state->work, adv7180_work);
>  	mutex_init(&state->mutex);
>  	state->autodetect = true;
> -	state->brightness = BRI_REG_DEF;
> -	state->hue = HUE_REG_DEF;
> -	state->contrast = CON_REG_DEF;
> -	state->saturation = SAT_REG_DEF;
>  	state->input = 0;
>  	sd = &state->sd;
>  	v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
>  
> -	ret = init_device(client, state);
> -	if (0 != ret)
> +	ret = adv7180_init_controls(state);
> +	if (ret)
>  		goto err_unreg_subdev;
> +	ret = init_device(client, state);
> +	if (ret)
> +		goto err_free_ctrl;
>  	return 0;
>  
> +err_free_ctrl:
> +	adv7180_exit_controls(state);
>  err_unreg_subdev:
>  	mutex_destroy(&state->mutex);
>  	v4l2_device_unregister_subdev(sd);
>  	kfree(state);
>  err:
> -	printk(KERN_ERR DRIVER_NAME ": Failed to probe: %d\n", ret);
> +	printk(KERN_ERR KBUILD_MODNAME ": Failed to probe: %d\n", ret);
>  	return ret;
>  }
>  
> @@ -678,7 +637,7 @@ static __devexit int adv7180_remove(struct i2c_client *client)
>  }
>  
>  static const struct i2c_device_id adv7180_id[] = {
> -	{DRIVER_NAME, 0},
> +	{KBUILD_MODNAME, 0},
>  	{},
>  };
>  
> @@ -716,7 +675,7 @@ MODULE_DEVICE_TABLE(i2c, adv7180_id);
>  static struct i2c_driver adv7180_driver = {
>  	.driver = {
>  		   .owner = THIS_MODULE,
> -		   .name = DRIVER_NAME,
> +		   .name = KBUILD_MODNAME,
>  		   },
>  	.probe = adv7180_probe,
>  	.remove = __devexit_p(adv7180_remove),
> 

Regards,

	Hans

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH RFC] [media] adv7180.c: convert to v4l2 control framework
  2012-07-11  6:34 ` Hans Verkuil
@ 2012-07-11 13:36   ` Federico Vaga
  2012-07-11 14:05     ` Hans Verkuil
  0 siblings, 1 reply; 6+ messages in thread
From: Federico Vaga @ 2012-07-11 13:36 UTC (permalink / raw)
  To: Hans Verkuil
  Cc: Mauro Carvalho Chehab, Giancarlo Asnaghi, linux-media, linux-kernel

Hi Hans,

Thank you for your review

> > +static int adv7180_init_controls(struct adv7180_state *state)
> > +{
> > +	v4l2_ctrl_handler_init(&state->ctrl_hdl, 2);
> 
> 2 -> 4, since there are 4 controls. It's a hint only, but it helps
> optimizing the internal hash data structure.

Sure :)

> > 
> > @@ -445,9 +402,9 @@ static const struct v4l2_subdev_video_ops
> > adv7180_video_ops = {> 
> >  static const struct v4l2_subdev_core_ops adv7180_core_ops = {
> >  
> >  	.g_chip_ident = adv7180_g_chip_ident,
> >  	.s_std = adv7180_s_std,
> > 
> > -	.queryctrl = adv7180_queryctrl,
> > -	.g_ctrl = adv7180_g_ctrl,
> > -	.s_ctrl = adv7180_s_ctrl,
> > +	.queryctrl = v4l2_subdev_queryctrl,
> > +	.g_ctrl = v4l2_subdev_g_ctrl,
> > +	.s_ctrl = v4l2_subdev_s_ctrl,
> 
> If adv7180 is currently *only* used by bridge/platform drivers that
> also use the control framework, then you can remove
> queryctrl/g/s_ctrl altogether.

I'm not sure to undestand this point. I "grepped" for the adv7180 and it 
seem that I'm the only user of the adv7180 (sta2x11 VIP driver). In the
VIP driver I don't use the control framework (there aren't controls), so 
I think these lines must be there. Am I wrong?

I think you are thinking at the "Inheriting Controls" section of the 
v4l2-controls.txt document. Right?


> > -	ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG,
> > state->hue); +	ret = i2c_smbus_write_byte_data(client,
> > ADV7180_HUE_REG,
> > +					ADV7180_HUE_DEF);
> 
> It shouldn't be necessary to initialize the controls since
> v4l2_ctrl_handler_setup does that for you already.

Removed

-- 
Federico Vaga

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH RFC] [media] adv7180.c: convert to v4l2 control framework
  2012-07-11 13:36   ` Federico Vaga
@ 2012-07-11 14:05     ` Hans Verkuil
  2012-07-11 14:19       ` Federico Vaga
  0 siblings, 1 reply; 6+ messages in thread
From: Hans Verkuil @ 2012-07-11 14:05 UTC (permalink / raw)
  To: Federico Vaga
  Cc: Mauro Carvalho Chehab, Giancarlo Asnaghi, linux-media, linux-kernel

On Wed 11 July 2012 15:36:25 Federico Vaga wrote:
> Hi Hans,
> 
> Thank you for your review
> 
> > > +static int adv7180_init_controls(struct adv7180_state *state)
> > > +{
> > > +	v4l2_ctrl_handler_init(&state->ctrl_hdl, 2);
> > 
> > 2 -> 4, since there are 4 controls. It's a hint only, but it helps
> > optimizing the internal hash data structure.
> 
> Sure :)
> 
> > > 
> > > @@ -445,9 +402,9 @@ static const struct v4l2_subdev_video_ops
> > > adv7180_video_ops = {> 
> > >  static const struct v4l2_subdev_core_ops adv7180_core_ops = {
> > >  
> > >  	.g_chip_ident = adv7180_g_chip_ident,
> > >  	.s_std = adv7180_s_std,
> > > 
> > > -	.queryctrl = adv7180_queryctrl,
> > > -	.g_ctrl = adv7180_g_ctrl,
> > > -	.s_ctrl = adv7180_s_ctrl,
> > > +	.queryctrl = v4l2_subdev_queryctrl,
> > > +	.g_ctrl = v4l2_subdev_g_ctrl,
> > > +	.s_ctrl = v4l2_subdev_s_ctrl,
> > 
> > If adv7180 is currently *only* used by bridge/platform drivers that
> > also use the control framework, then you can remove
> > queryctrl/g/s_ctrl altogether.
> 
> I'm not sure to undestand this point. I "grepped" for the adv7180 and it 
> seem that I'm the only user of the adv7180 (sta2x11 VIP driver). In the
> VIP driver I don't use the control framework (there aren't controls), so 
> I think these lines must be there. Am I wrong?

Correct. But once sta2x11 is converted to using the control framework, then
these lines can be dropped since no one else is using this subdevice driver.

> I think you are thinking at the "Inheriting Controls" section of the 
> v4l2-controls.txt document. Right?

Right.

Regards,

	Hans

> 
> 
> > > -	ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG,
> > > state->hue); +	ret = i2c_smbus_write_byte_data(client,
> > > ADV7180_HUE_REG,
> > > +					ADV7180_HUE_DEF);
> > 
> > It shouldn't be necessary to initialize the controls since
> > v4l2_ctrl_handler_setup does that for you already.
> 
> Removed
> 
> 

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH RFC] [media] adv7180.c: convert to v4l2 control framework
  2012-07-11 14:05     ` Hans Verkuil
@ 2012-07-11 14:19       ` Federico Vaga
  2012-07-11 14:21         ` Hans Verkuil
  0 siblings, 1 reply; 6+ messages in thread
From: Federico Vaga @ 2012-07-11 14:19 UTC (permalink / raw)
  To: Hans Verkuil
  Cc: Mauro Carvalho Chehab, Giancarlo Asnaghi, linux-media, linux-kernel

> > > @@ -445,9 +402,9 @@ static const struct v4l2_subdev_video_ops
> > > adv7180_video_ops = {> 
> > >  static const struct v4l2_subdev_core_ops adv7180_core_ops = {
> > >  
> > >   .g_chip_ident = adv7180_g_chip_ident,
> > >   .s_std = adv7180_s_std,
> > > 
> > > - .queryctrl = adv7180_queryctrl,
> > > - .g_ctrl = adv7180_g_ctrl,
> > > - .s_ctrl = adv7180_s_ctrl,
> > > + .queryctrl = v4l2_subdev_queryctrl,
> > > + .g_ctrl = v4l2_subdev_g_ctrl,
> > > + .s_ctrl = v4l2_subdev_s_ctrl,
> > 
> > I'm not sure to undestand this point. I "grepped" for the adv7180
> > and it seem that I'm the only user of the adv7180 (sta2x11 VIP
> > driver). In the VIP driver I don't use the control framework (there
> > aren't controls), so I think these lines must be there. Am I wrong?
> 
> Correct. But once sta2x11 is converted to using the control framework,
> then these lines can be dropped since no one else is using this
> subdevice driver.

What do you suggest? I re-submit this patch and when sta2x11 is fixed a 
I submit a new patch to remove these lines; or wait the full conversion 
of the sta2x11 driver and submit both patch?

-- 
Federico Vaga

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH RFC] [media] adv7180.c: convert to v4l2 control framework
  2012-07-11 14:19       ` Federico Vaga
@ 2012-07-11 14:21         ` Hans Verkuil
  0 siblings, 0 replies; 6+ messages in thread
From: Hans Verkuil @ 2012-07-11 14:21 UTC (permalink / raw)
  To: Federico Vaga
  Cc: Mauro Carvalho Chehab, Giancarlo Asnaghi, linux-media, linux-kernel

On Wed 11 July 2012 16:19:02 Federico Vaga wrote:
> > > > @@ -445,9 +402,9 @@ static const struct v4l2_subdev_video_ops
> > > > adv7180_video_ops = {> 
> > > >  static const struct v4l2_subdev_core_ops adv7180_core_ops = {
> > > >  
> > > >   .g_chip_ident = adv7180_g_chip_ident,
> > > >   .s_std = adv7180_s_std,
> > > > 
> > > > - .queryctrl = adv7180_queryctrl,
> > > > - .g_ctrl = adv7180_g_ctrl,
> > > > - .s_ctrl = adv7180_s_ctrl,
> > > > + .queryctrl = v4l2_subdev_queryctrl,
> > > > + .g_ctrl = v4l2_subdev_g_ctrl,
> > > > + .s_ctrl = v4l2_subdev_s_ctrl,
> > > 
> > > I'm not sure to undestand this point. I "grepped" for the adv7180
> > > and it seem that I'm the only user of the adv7180 (sta2x11 VIP
> > > driver). In the VIP driver I don't use the control framework (there
> > > aren't controls), so I think these lines must be there. Am I wrong?
> > 
> > Correct. But once sta2x11 is converted to using the control framework,
> > then these lines can be dropped since no one else is using this
> > subdevice driver.
> 
> What do you suggest? I re-submit this patch and when sta2x11 is fixed a 
> I submit a new patch to remove these lines; or wait the full conversion 
> of the sta2x11 driver and submit both patch?

Choice 1: when sta2x11 is fixed submit a new patch to remove those lines.

Regards,

	Hans

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2012-07-11 14:22 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-07-11  2:34 [PATCH RFC] [media] adv7180.c: convert to v4l2 control framework Federico Vaga
2012-07-11  6:34 ` Hans Verkuil
2012-07-11 13:36   ` Federico Vaga
2012-07-11 14:05     ` Hans Verkuil
2012-07-11 14:19       ` Federico Vaga
2012-07-11 14:21         ` Hans Verkuil

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.