[PATCH 0/5] Add vhost-blk support

[PATCH 0/5] Add vhost-blk support

[Asias He]

Hi folks,

This patchset adds vhost-blk support. vhost-blk is a in kernel virito-blk
device accelerator. Compared to userspace virtio-blk implementation, vhost-blk
gives about 5% to 15% performance improvement.

Asias He (5):
  aio: Export symbols and struct kiocb_batch for in kernel aio usage
  eventfd: Export symbol eventfd_file_create()
  vhost: Make vhost a separate module
  vhost-net: Use VHOST_NET_FEATURES for vhost-net
  vhost-blk: Add vhost-blk support

 drivers/vhost/Kconfig  |   20 +-
 drivers/vhost/Makefile |    6 +-
 drivers/vhost/blk.c    |  600 ++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/vhost/net.c    |    4 +-
 drivers/vhost/test.c   |    4 +-
 drivers/vhost/vhost.c  |   48 ++++
 drivers/vhost/vhost.h  |   18 +-
 fs/aio.c               |   37 ++-
 fs/eventfd.c           |    1 +
 include/linux/aio.h    |   21 ++
 include/linux/vhost.h  |    1 +
 11 files changed, 729 insertions(+), 31 deletions(-)
 create mode 100644 drivers/vhost/blk.c

-- 
1.7.10.4

[PATCH 0/5] Add vhost-blk support

[Asias He]

Hi folks,

This patchset adds vhost-blk support. vhost-blk is a in kernel virito-blk
device accelerator. Compared to userspace virtio-blk implementation, vhost-blk
gives about 5% to 15% performance improvement.

Asias He (5):
  aio: Export symbols and struct kiocb_batch for in kernel aio usage
  eventfd: Export symbol eventfd_file_create()
  vhost: Make vhost a separate module
  vhost-net: Use VHOST_NET_FEATURES for vhost-net
  vhost-blk: Add vhost-blk support

 drivers/vhost/Kconfig  |   20 +-
 drivers/vhost/Makefile |    6 +-
 drivers/vhost/blk.c    |  600 ++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/vhost/net.c    |    4 +-
 drivers/vhost/test.c   |    4 +-
 drivers/vhost/vhost.c  |   48 ++++
 drivers/vhost/vhost.h  |   18 +-
 fs/aio.c               |   37 ++-
 fs/eventfd.c           |    1 +
 include/linux/aio.h    |   21 ++
 include/linux/vhost.h  |    1 +
 11 files changed, 729 insertions(+), 31 deletions(-)
 create mode 100644 drivers/vhost/blk.c

-- 
1.7.10.4

[PATCH 1/5] aio: Export symbols and struct kiocb_batch for in kernel aio usage

[Asias He]

This is useful for people who want to use aio in kernel, e.g. vhost-blk.

Signed-off-by: Asias He <asias@redhat.com>
---
 fs/aio.c            |   37 ++++++++++++++++++-------------------
 include/linux/aio.h |   21 +++++++++++++++++++++
 2 files changed, 39 insertions(+), 19 deletions(-)

diff --git a/fs/aio.c b/fs/aio.c
index 55c4c76..93dfbdd 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -224,22 +224,24 @@ static void __put_ioctx(struct kioctx *ctx)
 	call_rcu(&ctx->rcu_head, ctx_rcu_free);
 }
 
-static inline int try_get_ioctx(struct kioctx *kioctx)
+inline int try_get_ioctx(struct kioctx *kioctx)
 {
 	return atomic_inc_not_zero(&kioctx->users);
 }
+EXPORT_SYMBOL(try_get_ioctx);
 
-static inline void put_ioctx(struct kioctx *kioctx)
+inline void put_ioctx(struct kioctx *kioctx)
 {
 	BUG_ON(atomic_read(&kioctx->users) <= 0);
 	if (unlikely(atomic_dec_and_test(&kioctx->users)))
 		__put_ioctx(kioctx);
 }
+EXPORT_SYMBOL(put_ioctx);
 
 /* ioctx_alloc
  *	Allocates and initializes an ioctx.  Returns an ERR_PTR if it failed.
  */
-static struct kioctx *ioctx_alloc(unsigned nr_events)
+struct kioctx *ioctx_alloc(unsigned nr_events)
 {
 	struct mm_struct *mm;
 	struct kioctx *ctx;
@@ -303,6 +305,7 @@ out_freectx:
 	dprintk("aio: error allocating ioctx %d\n", err);
 	return ERR_PTR(err);
 }
+EXPORT_SYMBOL(ioctx_alloc);
 
 /* kill_ctx
  *	Cancels all outstanding aio requests on an aio context.  Used 
@@ -436,23 +439,14 @@ static struct kiocb *__aio_get_req(struct kioctx *ctx)
 	return req;
 }
 
-/*
- * struct kiocb's are allocated in batches to reduce the number of
- * times the ctx lock is acquired and released.
- */
-#define KIOCB_BATCH_SIZE	32L
-struct kiocb_batch {
-	struct list_head head;
-	long count; /* number of requests left to allocate */
-};
-
-static void kiocb_batch_init(struct kiocb_batch *batch, long total)
+void kiocb_batch_init(struct kiocb_batch *batch, long total)
 {
 	INIT_LIST_HEAD(&batch->head);
 	batch->count = total;
 }
+EXPORT_SYMBOL(kiocb_batch_init);
 
-static void kiocb_batch_free(struct kioctx *ctx, struct kiocb_batch *batch)
+void kiocb_batch_free(struct kioctx *ctx, struct kiocb_batch *batch)
 {
 	struct kiocb *req, *n;
 
@@ -470,6 +464,7 @@ static void kiocb_batch_free(struct kioctx *ctx, struct kiocb_batch *batch)
 		wake_up_all(&ctx->wait);
 	spin_unlock_irq(&ctx->ctx_lock);
 }
+EXPORT_SYMBOL(kiocb_batch_free);
 
 /*
  * Allocate a batch of kiocbs.  This avoids taking and dropping the
@@ -540,7 +535,7 @@ out:
 	return allocated;
 }
 
-static inline struct kiocb *aio_get_req(struct kioctx *ctx,
+inline struct kiocb *aio_get_req(struct kioctx *ctx,
 					struct kiocb_batch *batch)
 {
 	struct kiocb *req;
@@ -552,6 +547,7 @@ static inline struct kiocb *aio_get_req(struct kioctx *ctx,
 	list_del(&req->ki_batch);
 	return req;
 }
+EXPORT_SYMBOL(aio_get_req);
 
 static inline void really_put_req(struct kioctx *ctx, struct kiocb *req)
 {
@@ -721,7 +717,7 @@ static inline int __queue_kicked_iocb(struct kiocb *iocb)
  * simplifies the coding of individual aio operations as
  * it avoids various potential races.
  */
-static ssize_t aio_run_iocb(struct kiocb *iocb)
+ssize_t aio_run_iocb(struct kiocb *iocb)
 {
 	struct kioctx	*ctx = iocb->ki_ctx;
 	ssize_t (*retry)(struct kiocb *);
@@ -815,6 +811,7 @@ out:
 	}
 	return ret;
 }
+EXPORT_SYMBOL(aio_run_iocb);
 
 /*
  * __aio_run_iocbs:
@@ -1136,7 +1133,7 @@ static inline void clear_timeout(struct aio_timeout *to)
 	del_singleshot_timer_sync(&to->timer);
 }
 
-static int read_events(struct kioctx *ctx,
+int read_events(struct kioctx *ctx,
 			long min_nr, long nr,
 			struct io_event __user *event,
 			struct timespec __user *timeout)
@@ -1252,6 +1249,7 @@ out:
 	destroy_timer_on_stack(&to.timer);
 	return i ? i : ret;
 }
+EXPORT_SYMBOL(read_events);
 
 /* Take an ioctx and remove it from the list of ioctx's.  Protects 
  * against races with itself via ->dead.
@@ -1492,7 +1490,7 @@ static ssize_t aio_setup_single_vector(int type, struct file * file, struct kioc
  *	Performs the initial checks and aio retry method
  *	setup for the kiocb at the time of io submission.
  */
-static ssize_t aio_setup_iocb(struct kiocb *kiocb, bool compat)
+ssize_t aio_setup_iocb(struct kiocb *kiocb, bool compat)
 {
 	struct file *file = kiocb->ki_filp;
 	ssize_t ret = 0;
@@ -1570,6 +1568,7 @@ static ssize_t aio_setup_iocb(struct kiocb *kiocb, bool compat)
 
 	return 0;
 }
+EXPORT_SYMBOL(aio_setup_iocb);
 
 static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb,
 			 struct iocb *iocb, struct kiocb_batch *batch,
diff --git a/include/linux/aio.h b/include/linux/aio.h
index b1a520e..4731da5 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -126,6 +126,16 @@ struct kiocb {
 	struct eventfd_ctx	*ki_eventfd;
 };
 
+/*
+ * struct kiocb's are allocated in batches to reduce the number of
+ * times the ctx lock is acquired and released.
+ */
+#define KIOCB_BATCH_SIZE	32L
+struct kiocb_batch {
+	struct list_head head;
+	long count; /* number of requests left to allocate */
+};
+
 #define is_sync_kiocb(iocb)	((iocb)->ki_key == KIOCB_SYNC_KEY)
 #define init_sync_kiocb(x, filp)			\
 	do {						\
@@ -216,6 +226,17 @@ struct mm_struct;
 extern void exit_aio(struct mm_struct *mm);
 extern long do_io_submit(aio_context_t ctx_id, long nr,
 			 struct iocb __user *__user *iocbpp, bool compat);
+extern struct kioctx *ioctx_alloc(unsigned nr_events);
+extern ssize_t aio_run_iocb(struct kiocb *iocb);
+extern int read_events(struct kioctx *ctx, long min_nr, long nr,
+		       struct io_event __user *event,
+		       struct timespec __user *timeout);
+extern ssize_t aio_setup_iocb(struct kiocb *kiocb, bool compat);
+extern void kiocb_batch_init(struct kiocb_batch *batch, long total);
+extern void kiocb_batch_free(struct kioctx *ctx, struct kiocb_batch *batch);
+extern struct kiocb *aio_get_req(struct kioctx *ctx, struct kiocb_batch *batch);
+extern int try_get_ioctx(struct kioctx *kioctx);
+extern void put_ioctx(struct kioctx *kioctx);
 #else
 static inline ssize_t wait_on_sync_kiocb(struct kiocb *iocb) { return 0; }
 static inline int aio_put_req(struct kiocb *iocb) { return 0; }
-- 
1.7.10.4

[PATCH 1/5] aio: Export symbols and struct kiocb_batch for in kernel aio usage

[Asias He]

This is useful for people who want to use aio in kernel, e.g. vhost-blk.

Signed-off-by: Asias He <asias@redhat.com>
---
 fs/aio.c            |   37 ++++++++++++++++++-------------------
 include/linux/aio.h |   21 +++++++++++++++++++++
 2 files changed, 39 insertions(+), 19 deletions(-)

diff --git a/fs/aio.c b/fs/aio.c
index 55c4c76..93dfbdd 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -224,22 +224,24 @@ static void __put_ioctx(struct kioctx *ctx)
 	call_rcu(&ctx->rcu_head, ctx_rcu_free);
 }
 
-static inline int try_get_ioctx(struct kioctx *kioctx)
+inline int try_get_ioctx(struct kioctx *kioctx)
 {
 	return atomic_inc_not_zero(&kioctx->users);
 }
+EXPORT_SYMBOL(try_get_ioctx);
 
-static inline void put_ioctx(struct kioctx *kioctx)
+inline void put_ioctx(struct kioctx *kioctx)
 {
 	BUG_ON(atomic_read(&kioctx->users) <= 0);
 	if (unlikely(atomic_dec_and_test(&kioctx->users)))
 		__put_ioctx(kioctx);
 }
+EXPORT_SYMBOL(put_ioctx);
 
 /* ioctx_alloc
  *	Allocates and initializes an ioctx.  Returns an ERR_PTR if it failed.
  */
-static struct kioctx *ioctx_alloc(unsigned nr_events)
+struct kioctx *ioctx_alloc(unsigned nr_events)
 {
 	struct mm_struct *mm;
 	struct kioctx *ctx;
@@ -303,6 +305,7 @@ out_freectx:
 	dprintk("aio: error allocating ioctx %d\n", err);
 	return ERR_PTR(err);
 }
+EXPORT_SYMBOL(ioctx_alloc);
 
 /* kill_ctx
  *	Cancels all outstanding aio requests on an aio context.  Used 
@@ -436,23 +439,14 @@ static struct kiocb *__aio_get_req(struct kioctx *ctx)
 	return req;
 }
 
-/*
- * struct kiocb's are allocated in batches to reduce the number of
- * times the ctx lock is acquired and released.
- */
-#define KIOCB_BATCH_SIZE	32L
-struct kiocb_batch {
-	struct list_head head;
-	long count; /* number of requests left to allocate */
-};
-
-static void kiocb_batch_init(struct kiocb_batch *batch, long total)
+void kiocb_batch_init(struct kiocb_batch *batch, long total)
 {
 	INIT_LIST_HEAD(&batch->head);
 	batch->count = total;
 }
+EXPORT_SYMBOL(kiocb_batch_init);
 
-static void kiocb_batch_free(struct kioctx *ctx, struct kiocb_batch *batch)
+void kiocb_batch_free(struct kioctx *ctx, struct kiocb_batch *batch)
 {
 	struct kiocb *req, *n;
 
@@ -470,6 +464,7 @@ static void kiocb_batch_free(struct kioctx *ctx, struct kiocb_batch *batch)
 		wake_up_all(&ctx->wait);
 	spin_unlock_irq(&ctx->ctx_lock);
 }
+EXPORT_SYMBOL(kiocb_batch_free);
 
 /*
  * Allocate a batch of kiocbs.  This avoids taking and dropping the
@@ -540,7 +535,7 @@ out:
 	return allocated;
 }
 
-static inline struct kiocb *aio_get_req(struct kioctx *ctx,
+inline struct kiocb *aio_get_req(struct kioctx *ctx,
 					struct kiocb_batch *batch)
 {
 	struct kiocb *req;
@@ -552,6 +547,7 @@ static inline struct kiocb *aio_get_req(struct kioctx *ctx,
 	list_del(&req->ki_batch);
 	return req;
 }
+EXPORT_SYMBOL(aio_get_req);
 
 static inline void really_put_req(struct kioctx *ctx, struct kiocb *req)
 {
@@ -721,7 +717,7 @@ static inline int __queue_kicked_iocb(struct kiocb *iocb)
  * simplifies the coding of individual aio operations as
  * it avoids various potential races.
  */
-static ssize_t aio_run_iocb(struct kiocb *iocb)
+ssize_t aio_run_iocb(struct kiocb *iocb)
 {
 	struct kioctx	*ctx = iocb->ki_ctx;
 	ssize_t (*retry)(struct kiocb *);
@@ -815,6 +811,7 @@ out:
 	}
 	return ret;
 }
+EXPORT_SYMBOL(aio_run_iocb);
 
 /*
  * __aio_run_iocbs:
@@ -1136,7 +1133,7 @@ static inline void clear_timeout(struct aio_timeout *to)
 	del_singleshot_timer_sync(&to->timer);
 }
 
-static int read_events(struct kioctx *ctx,
+int read_events(struct kioctx *ctx,
 			long min_nr, long nr,
 			struct io_event __user *event,
 			struct timespec __user *timeout)
@@ -1252,6 +1249,7 @@ out:
 	destroy_timer_on_stack(&to.timer);
 	return i ? i : ret;
 }
+EXPORT_SYMBOL(read_events);
 
 /* Take an ioctx and remove it from the list of ioctx's.  Protects 
  * against races with itself via ->dead.
@@ -1492,7 +1490,7 @@ static ssize_t aio_setup_single_vector(int type, struct file * file, struct kioc
  *	Performs the initial checks and aio retry method
  *	setup for the kiocb at the time of io submission.
  */
-static ssize_t aio_setup_iocb(struct kiocb *kiocb, bool compat)
+ssize_t aio_setup_iocb(struct kiocb *kiocb, bool compat)
 {
 	struct file *file = kiocb->ki_filp;
 	ssize_t ret = 0;
@@ -1570,6 +1568,7 @@ static ssize_t aio_setup_iocb(struct kiocb *kiocb, bool compat)
 
 	return 0;
 }
+EXPORT_SYMBOL(aio_setup_iocb);
 
 static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb,
 			 struct iocb *iocb, struct kiocb_batch *batch,
diff --git a/include/linux/aio.h b/include/linux/aio.h
index b1a520e..4731da5 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -126,6 +126,16 @@ struct kiocb {
 	struct eventfd_ctx	*ki_eventfd;
 };
 
+/*
+ * struct kiocb's are allocated in batches to reduce the number of
+ * times the ctx lock is acquired and released.
+ */
+#define KIOCB_BATCH_SIZE	32L
+struct kiocb_batch {
+	struct list_head head;
+	long count; /* number of requests left to allocate */
+};
+
 #define is_sync_kiocb(iocb)	((iocb)->ki_key == KIOCB_SYNC_KEY)
 #define init_sync_kiocb(x, filp)			\
 	do {						\
@@ -216,6 +226,17 @@ struct mm_struct;
 extern void exit_aio(struct mm_struct *mm);
 extern long do_io_submit(aio_context_t ctx_id, long nr,
 			 struct iocb __user *__user *iocbpp, bool compat);
+extern struct kioctx *ioctx_alloc(unsigned nr_events);
+extern ssize_t aio_run_iocb(struct kiocb *iocb);
+extern int read_events(struct kioctx *ctx, long min_nr, long nr,
+		       struct io_event __user *event,
+		       struct timespec __user *timeout);
+extern ssize_t aio_setup_iocb(struct kiocb *kiocb, bool compat);
+extern void kiocb_batch_init(struct kiocb_batch *batch, long total);
+extern void kiocb_batch_free(struct kioctx *ctx, struct kiocb_batch *batch);
+extern struct kiocb *aio_get_req(struct kioctx *ctx, struct kiocb_batch *batch);
+extern int try_get_ioctx(struct kioctx *kioctx);
+extern void put_ioctx(struct kioctx *kioctx);
 #else
 static inline ssize_t wait_on_sync_kiocb(struct kiocb *iocb) { return 0; }
 static inline int aio_put_req(struct kiocb *iocb) { return 0; }
-- 
1.7.10.4

--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 1/5] aio: Export symbols and struct kiocb_batch for in kernel aio usage

[James Bottomley]

On Thu, 2012-07-12 at 23:35 +0800, Asias He wrote:
> This is useful for people who want to use aio in kernel, e.g. vhost-blk.
> 
> Signed-off-by: Asias He <asias@redhat.com>
> ---
>  fs/aio.c            |   37 ++++++++++++++++++-------------------
>  include/linux/aio.h |   21 +++++++++++++++++++++
>  2 files changed, 39 insertions(+), 19 deletions(-)

Um, I think you don't quite understand how aio in the kernel would work;
it's not as simple as just exporting the interfaces.  There's already a
(very long) patch set from oracle to do this so loop can use aio:

http://marc.info/?l=linux-fsdevel&m=133312234313122

James

Re: [PATCH 1/5] aio: Export symbols and struct kiocb_batch for in kernel aio usage

[Asias He]

Hi James,

On 07/13/2012 01:50 AM, James Bottomley wrote:
> On Thu, 2012-07-12 at 23:35 +0800, Asias He wrote:
>> This is useful for people who want to use aio in kernel, e.g. vhost-blk.
>>
>> Signed-off-by: Asias He <asias@redhat.com>
>> ---
>>   fs/aio.c            |   37 ++++++++++++++++++-------------------
>>   include/linux/aio.h |   21 +++++++++++++++++++++
>>   2 files changed, 39 insertions(+), 19 deletions(-)
>
> Um, I think you don't quite understand how aio in the kernel would work;
> it's not as simple as just exporting the interfaces.  There's already a
> (very long) patch set from oracle to do this so loop can use aio:
>
> http://marc.info/?l=linux-fsdevel&m=133312234313122

Oh, I did not see this patch set. Thanks for pointing it out! This bit 
hasn't merged, right? I'd love to use the aio_kernel_() interface if it 
is merged. It will simply vhost-blk. Due to lack of better kernel aio 
interface, we are currently doing io_setup, io_submit, etc. in vhost-blk 
on our own.

-- 
Asias

Re: [PATCH 1/5] aio: Export symbols and struct kiocb_batch for in kernel aio usage

[Asias He]

Hi James,

On 07/13/2012 01:50 AM, James Bottomley wrote:
> On Thu, 2012-07-12 at 23:35 +0800, Asias He wrote:
>> This is useful for people who want to use aio in kernel, e.g. vhost-blk.
>>
>> Signed-off-by: Asias He <asias@redhat.com>
>> ---
>>   fs/aio.c            |   37 ++++++++++++++++++-------------------
>>   include/linux/aio.h |   21 +++++++++++++++++++++
>>   2 files changed, 39 insertions(+), 19 deletions(-)
>
> Um, I think you don't quite understand how aio in the kernel would work;
> it's not as simple as just exporting the interfaces.  There's already a
> (very long) patch set from oracle to do this so loop can use aio:
>
> http://marc.info/?l=linux-fsdevel&m=133312234313122

Oh, I did not see this patch set. Thanks for pointing it out! This bit 
hasn't merged, right? I'd love to use the aio_kernel_() interface if it 
is merged. It will simply vhost-blk. Due to lack of better kernel aio 
interface, we are currently doing io_setup, io_submit, etc. in vhost-blk 
on our own.

-- 
Asias

Re: [PATCH 1/5] aio: Export symbols and struct kiocb_batch for in kernel aio usage

[Asias He]

Hi James,

On 07/13/2012 01:50 AM, James Bottomley wrote:
> On Thu, 2012-07-12 at 23:35 +0800, Asias He wrote:
>> This is useful for people who want to use aio in kernel, e.g. vhost-blk.
>>
>> Signed-off-by: Asias He <asias@redhat.com>
>> ---
>>   fs/aio.c            |   37 ++++++++++++++++++-------------------
>>   include/linux/aio.h |   21 +++++++++++++++++++++
>>   2 files changed, 39 insertions(+), 19 deletions(-)
>
> Um, I think you don't quite understand how aio in the kernel would work;
> it's not as simple as just exporting the interfaces.  There's already a
> (very long) patch set from oracle to do this so loop can use aio:
>
> http://marc.info/?l=linux-fsdevel&m=133312234313122

Oh, I did not see this patch set. Thanks for pointing it out! This bit 
hasn't merged, right? I'd love to use the aio_kernel_() interface if it 
is merged. It will simply vhost-blk. Due to lack of better kernel aio 
interface, we are currently doing io_setup, io_submit, etc. in vhost-blk 
on our own.

-- 
Asias


--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

[PATCH 1/5] aio: Export symbols and struct kiocb_batch for in kernel aio usage

[Asias He]

This is useful for people who want to use aio in kernel, e.g. vhost-blk.

Signed-off-by: Asias He <asias@redhat.com>
---
 fs/aio.c            |   37 ++++++++++++++++++-------------------
 include/linux/aio.h |   21 +++++++++++++++++++++
 2 files changed, 39 insertions(+), 19 deletions(-)

diff --git a/fs/aio.c b/fs/aio.c
index 55c4c76..93dfbdd 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -224,22 +224,24 @@ static void __put_ioctx(struct kioctx *ctx)
 	call_rcu(&ctx->rcu_head, ctx_rcu_free);
 }
 
-static inline int try_get_ioctx(struct kioctx *kioctx)
+inline int try_get_ioctx(struct kioctx *kioctx)
 {
 	return atomic_inc_not_zero(&kioctx->users);
 }
+EXPORT_SYMBOL(try_get_ioctx);
 
-static inline void put_ioctx(struct kioctx *kioctx)
+inline void put_ioctx(struct kioctx *kioctx)
 {
 	BUG_ON(atomic_read(&kioctx->users) <= 0);
 	if (unlikely(atomic_dec_and_test(&kioctx->users)))
 		__put_ioctx(kioctx);
 }
+EXPORT_SYMBOL(put_ioctx);
 
 /* ioctx_alloc
  *	Allocates and initializes an ioctx.  Returns an ERR_PTR if it failed.
  */
-static struct kioctx *ioctx_alloc(unsigned nr_events)
+struct kioctx *ioctx_alloc(unsigned nr_events)
 {
 	struct mm_struct *mm;
 	struct kioctx *ctx;
@@ -303,6 +305,7 @@ out_freectx:
 	dprintk("aio: error allocating ioctx %d\n", err);
 	return ERR_PTR(err);
 }
+EXPORT_SYMBOL(ioctx_alloc);
 
 /* kill_ctx
  *	Cancels all outstanding aio requests on an aio context.  Used 
@@ -436,23 +439,14 @@ static struct kiocb *__aio_get_req(struct kioctx *ctx)
 	return req;
 }
 
-/*
- * struct kiocb's are allocated in batches to reduce the number of
- * times the ctx lock is acquired and released.
- */
-#define KIOCB_BATCH_SIZE	32L
-struct kiocb_batch {
-	struct list_head head;
-	long count; /* number of requests left to allocate */
-};
-
-static void kiocb_batch_init(struct kiocb_batch *batch, long total)
+void kiocb_batch_init(struct kiocb_batch *batch, long total)
 {
 	INIT_LIST_HEAD(&batch->head);
 	batch->count = total;
 }
+EXPORT_SYMBOL(kiocb_batch_init);
 
-static void kiocb_batch_free(struct kioctx *ctx, struct kiocb_batch *batch)
+void kiocb_batch_free(struct kioctx *ctx, struct kiocb_batch *batch)
 {
 	struct kiocb *req, *n;
 
@@ -470,6 +464,7 @@ static void kiocb_batch_free(struct kioctx *ctx, struct kiocb_batch *batch)
 		wake_up_all(&ctx->wait);
 	spin_unlock_irq(&ctx->ctx_lock);
 }
+EXPORT_SYMBOL(kiocb_batch_free);
 
 /*
  * Allocate a batch of kiocbs.  This avoids taking and dropping the
@@ -540,7 +535,7 @@ out:
 	return allocated;
 }
 
-static inline struct kiocb *aio_get_req(struct kioctx *ctx,
+inline struct kiocb *aio_get_req(struct kioctx *ctx,
 					struct kiocb_batch *batch)
 {
 	struct kiocb *req;
@@ -552,6 +547,7 @@ static inline struct kiocb *aio_get_req(struct kioctx *ctx,
 	list_del(&req->ki_batch);
 	return req;
 }
+EXPORT_SYMBOL(aio_get_req);
 
 static inline void really_put_req(struct kioctx *ctx, struct kiocb *req)
 {
@@ -721,7 +717,7 @@ static inline int __queue_kicked_iocb(struct kiocb *iocb)
  * simplifies the coding of individual aio operations as
  * it avoids various potential races.
  */
-static ssize_t aio_run_iocb(struct kiocb *iocb)
+ssize_t aio_run_iocb(struct kiocb *iocb)
 {
 	struct kioctx	*ctx = iocb->ki_ctx;
 	ssize_t (*retry)(struct kiocb *);
@@ -815,6 +811,7 @@ out:
 	}
 	return ret;
 }
+EXPORT_SYMBOL(aio_run_iocb);
 
 /*
  * __aio_run_iocbs:
@@ -1136,7 +1133,7 @@ static inline void clear_timeout(struct aio_timeout *to)
 	del_singleshot_timer_sync(&to->timer);
 }
 
-static int read_events(struct kioctx *ctx,
+int read_events(struct kioctx *ctx,
 			long min_nr, long nr,
 			struct io_event __user *event,
 			struct timespec __user *timeout)
@@ -1252,6 +1249,7 @@ out:
 	destroy_timer_on_stack(&to.timer);
 	return i ? i : ret;
 }
+EXPORT_SYMBOL(read_events);
 
 /* Take an ioctx and remove it from the list of ioctx's.  Protects 
  * against races with itself via ->dead.
@@ -1492,7 +1490,7 @@ static ssize_t aio_setup_single_vector(int type, struct file * file, struct kioc
  *	Performs the initial checks and aio retry method
  *	setup for the kiocb at the time of io submission.
  */
-static ssize_t aio_setup_iocb(struct kiocb *kiocb, bool compat)
+ssize_t aio_setup_iocb(struct kiocb *kiocb, bool compat)
 {
 	struct file *file = kiocb->ki_filp;
 	ssize_t ret = 0;
@@ -1570,6 +1568,7 @@ static ssize_t aio_setup_iocb(struct kiocb *kiocb, bool compat)
 
 	return 0;
 }
+EXPORT_SYMBOL(aio_setup_iocb);
 
 static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb,
 			 struct iocb *iocb, struct kiocb_batch *batch,
diff --git a/include/linux/aio.h b/include/linux/aio.h
index b1a520e..4731da5 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -126,6 +126,16 @@ struct kiocb {
 	struct eventfd_ctx	*ki_eventfd;
 };
 
+/*
+ * struct kiocb's are allocated in batches to reduce the number of
+ * times the ctx lock is acquired and released.
+ */
+#define KIOCB_BATCH_SIZE	32L
+struct kiocb_batch {
+	struct list_head head;
+	long count; /* number of requests left to allocate */
+};
+
 #define is_sync_kiocb(iocb)	((iocb)->ki_key == KIOCB_SYNC_KEY)
 #define init_sync_kiocb(x, filp)			\
 	do {						\
@@ -216,6 +226,17 @@ struct mm_struct;
 extern void exit_aio(struct mm_struct *mm);
 extern long do_io_submit(aio_context_t ctx_id, long nr,
 			 struct iocb __user *__user *iocbpp, bool compat);
+extern struct kioctx *ioctx_alloc(unsigned nr_events);
+extern ssize_t aio_run_iocb(struct kiocb *iocb);
+extern int read_events(struct kioctx *ctx, long min_nr, long nr,
+		       struct io_event __user *event,
+		       struct timespec __user *timeout);
+extern ssize_t aio_setup_iocb(struct kiocb *kiocb, bool compat);
+extern void kiocb_batch_init(struct kiocb_batch *batch, long total);
+extern void kiocb_batch_free(struct kioctx *ctx, struct kiocb_batch *batch);
+extern struct kiocb *aio_get_req(struct kioctx *ctx, struct kiocb_batch *batch);
+extern int try_get_ioctx(struct kioctx *kioctx);
+extern void put_ioctx(struct kioctx *kioctx);
 #else
 static inline ssize_t wait_on_sync_kiocb(struct kiocb *iocb) { return 0; }
 static inline int aio_put_req(struct kiocb *iocb) { return 0; }
-- 
1.7.10.4

Re: [PATCH 0/5] Add vhost-blk support

[Jeff Moyer]

Asias He <asias@redhat.com> writes:

> Hi folks,
>
> This patchset adds vhost-blk support. vhost-blk is a in kernel virito-blk
> device accelerator. Compared to userspace virtio-blk implementation, vhost-blk
> gives about 5% to 15% performance improvement.
>
> Asias He (5):
>   aio: Export symbols and struct kiocb_batch for in kernel aio usage
>   eventfd: Export symbol eventfd_file_create()
>   vhost: Make vhost a separate module
>   vhost-net: Use VHOST_NET_FEATURES for vhost-net
>   vhost-blk: Add vhost-blk support

I only saw patches 0 and 1.  Where are the other 4?  If the answer is,
"not on lkml," then please resend them, CC'ing lkml.  I'd like to be
able to see the usage of the aio routines.

Cheers,
Jeff

Re: [PATCH 0/5] Add vhost-blk support

[Jeff Moyer]

Asias He <asias@redhat.com> writes:

> Hi folks,
>
> This patchset adds vhost-blk support. vhost-blk is a in kernel virito-blk
> device accelerator. Compared to userspace virtio-blk implementation, vhost-blk
> gives about 5% to 15% performance improvement.
>
> Asias He (5):
>   aio: Export symbols and struct kiocb_batch for in kernel aio usage
>   eventfd: Export symbol eventfd_file_create()
>   vhost: Make vhost a separate module
>   vhost-net: Use VHOST_NET_FEATURES for vhost-net
>   vhost-blk: Add vhost-blk support

I only saw patches 0 and 1.  Where are the other 4?  If the answer is,
"not on lkml," then please resend them, CC'ing lkml.  I'd like to be
able to see the usage of the aio routines.

Cheers,
Jeff

--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Asias He]

Hello Jeff,

On 07/13/2012 12:06 AM, Jeff Moyer wrote:
> Asias He <asias@redhat.com> writes:
>
>> Hi folks,
>>
>> This patchset adds vhost-blk support. vhost-blk is a in kernel virito-blk
>> device accelerator. Compared to userspace virtio-blk implementation, vhost-blk
>> gives about 5% to 15% performance improvement.
>>
>> Asias He (5):
>>    aio: Export symbols and struct kiocb_batch for in kernel aio usage
>>    eventfd: Export symbol eventfd_file_create()
>>    vhost: Make vhost a separate module
>>    vhost-net: Use VHOST_NET_FEATURES for vhost-net
>>    vhost-blk: Add vhost-blk support
>
> I only saw patches 0 and 1.  Where are the other 4?  If the answer is,
> "not on lkml," then please resend them, CC'ing lkml.

I did send all the 0-5 patches to lkml, but I somehow messed up the 
thread. Will CC you next time.

> I'd like to be able to see the usage of the aio routines.

OK. It'd be nice if you could review. Thanks.

-- 
Asias

Re: [PATCH 0/5] Add vhost-blk support

[Asias He]

Hello Jeff,

On 07/13/2012 12:06 AM, Jeff Moyer wrote:
> Asias He <asias@redhat.com> writes:
>
>> Hi folks,
>>
>> This patchset adds vhost-blk support. vhost-blk is a in kernel virito-blk
>> device accelerator. Compared to userspace virtio-blk implementation, vhost-blk
>> gives about 5% to 15% performance improvement.
>>
>> Asias He (5):
>>    aio: Export symbols and struct kiocb_batch for in kernel aio usage
>>    eventfd: Export symbol eventfd_file_create()
>>    vhost: Make vhost a separate module
>>    vhost-net: Use VHOST_NET_FEATURES for vhost-net
>>    vhost-blk: Add vhost-blk support
>
> I only saw patches 0 and 1.  Where are the other 4?  If the answer is,
> "not on lkml," then please resend them, CC'ing lkml.

I did send all the 0-5 patches to lkml, but I somehow messed up the 
thread. Will CC you next time.

> I'd like to be able to see the usage of the aio routines.

OK. It'd be nice if you could review. Thanks.

-- 
Asias


--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Asias He]

Hello Jeff,

On 07/13/2012 12:06 AM, Jeff Moyer wrote:
> Asias He <asias@redhat.com> writes:
>
>> Hi folks,
>>
>> This patchset adds vhost-blk support. vhost-blk is a in kernel virito-blk
>> device accelerator. Compared to userspace virtio-blk implementation, vhost-blk
>> gives about 5% to 15% performance improvement.
>>
>> Asias He (5):
>>    aio: Export symbols and struct kiocb_batch for in kernel aio usage
>>    eventfd: Export symbol eventfd_file_create()
>>    vhost: Make vhost a separate module
>>    vhost-net: Use VHOST_NET_FEATURES for vhost-net
>>    vhost-blk: Add vhost-blk support
>
> I only saw patches 0 and 1.  Where are the other 4?  If the answer is,
> "not on lkml," then please resend them, CC'ing lkml.

I did send all the 0-5 patches to lkml, but I somehow messed up the 
thread. Will CC you next time.

> I'd like to be able to see the usage of the aio routines.

OK. It'd be nice if you could review. Thanks.

-- 
Asias

Re: [PATCH 0/5] Add vhost-blk support

[Jeff Moyer]

Asias He <asias@redhat.com> writes:

> Hi folks,
>
> This patchset adds vhost-blk support. vhost-blk is a in kernel virito-blk
> device accelerator. Compared to userspace virtio-blk implementation, vhost-blk
> gives about 5% to 15% performance improvement.
>
> Asias He (5):
>   aio: Export symbols and struct kiocb_batch for in kernel aio usage
>   eventfd: Export symbol eventfd_file_create()
>   vhost: Make vhost a separate module
>   vhost-net: Use VHOST_NET_FEATURES for vhost-net
>   vhost-blk: Add vhost-blk support

I only saw patches 0 and 1.  Where are the other 4?  If the answer is,
"not on lkml," then please resend them, CC'ing lkml.  I'd like to be
able to see the usage of the aio routines.

Cheers,
Jeff

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Thu, Jul 12, 2012 at 4:35 PM, Asias He <asias@redhat.com> wrote:
> This patchset adds vhost-blk support. vhost-blk is a in kernel virito-blk
> device accelerator. Compared to userspace virtio-blk implementation, vhost-blk
> gives about 5% to 15% performance improvement.

Why is it 5-15% faster?  vhost-blk and the userspace virtio-blk you
benchmarked should be doing basically the same thing:

1. An eventfd file descriptor is signalled when the vring has new
requests available from the guest.
2. A thread wakes up and processes the virtqueue.
3. Linux AIO is used to issue host I/O.
4. An interrupt is injected into the guest.

Does the vhost-blk implementation do anything fundamentally different
from userspace?  Where is the overhead that userspace virtio-blk has?

I'm asking because it would be beneficial to fix the overhead
(especially it that could speed up all userspace applications) instead
of adding a special-purpose kernel module to work around the overhead.

Stefan

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Thu, Jul 12, 2012 at 4:35 PM, Asias He <asias@redhat.com> wrote:
> This patchset adds vhost-blk support. vhost-blk is a in kernel virito-blk
> device accelerator. Compared to userspace virtio-blk implementation, vhost-blk
> gives about 5% to 15% performance improvement.

Why is it 5-15% faster?  vhost-blk and the userspace virtio-blk you
benchmarked should be doing basically the same thing:

1. An eventfd file descriptor is signalled when the vring has new
requests available from the guest.
2. A thread wakes up and processes the virtqueue.
3. Linux AIO is used to issue host I/O.
4. An interrupt is injected into the guest.

Does the vhost-blk implementation do anything fundamentally different
from userspace?  Where is the overhead that userspace virtio-blk has?

I'm asking because it would be beneficial to fix the overhead
(especially it that could speed up all userspace applications) instead
of adding a special-purpose kernel module to work around the overhead.

Stefan

--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Asias He]

On 07/16/2012 07:58 PM, Stefan Hajnoczi wrote:
> On Thu, Jul 12, 2012 at 4:35 PM, Asias He <asias@redhat.com> wrote:
>> This patchset adds vhost-blk support. vhost-blk is a in kernel virito-blk
>> device accelerator. Compared to userspace virtio-blk implementation, vhost-blk
>> gives about 5% to 15% performance improvement.
>
> Why is it 5-15% faster?  vhost-blk and the userspace virtio-blk you
> benchmarked should be doing basically the same thing:
>
> 1. An eventfd file descriptor is signalled when the vring has new
> requests available from the guest.
> 2. A thread wakes up and processes the virtqueue.
> 3. Linux AIO is used to issue host I/O.
> 4. An interrupt is injected into the guest.

Yes. This is how both of them work. Though, there are some differences 
in details. e.g.

In vhost-blk, we use the vhost's work infrastructure to handle the 
requests. In kvm tool, we use a dedicated thread.
In vhost-blk, we use irqfd to inject interrupts. In kvm tool, we use 
ioctl to inject interrupts.


> Does the vhost-blk implementation do anything fundamentally different
> from userspace?  Where is the overhead that userspace virtio-blk has?


Currently, no. But we could play with bio directly in vhost-blk as 
Christoph suggested which could make the IO path from guest to host's 
real storage even shorter in vhost-blk.

I've been trying my best to reduce the overhead of virtio-blk at kvm 
tool side. I do not see any significant overhead out there. Compared to 
vhost-blk, the overhead we have in userspace virito-blk is syscalls. In 
each IO request, we have

    epoll_wait() & read(): wait for the eventfd which guest notifies us
    io_submit(): submit the aio
    read(): read the aio complete eventfd
    io_getevents(): reap the aio complete result
    ioctl(): trigger the interrupt

So, vhost-blk at least saves ~6 syscalls for us in each request.

> I'm asking because it would be beneficial to fix the overhead
> (especially it that could speed up all userspace applications) instead
> of adding a special-purpose kernel module to work around the overhead.

I guess you mean qemu here. Yes, in theory, qemu's block layer can be 
improved to achieve similar performance as vhost-blk or kvm tool's 
userspace virito-blk has. But I think it makes no sense to prevent one 
solution becase there is another in theory solution called: we can do 
similar in qemu.

What do you mean by specail-purpose here, we need general-purpose kernel
module? Is vhost-net a special purpose kernel module?  Is xen-blkback a 
special-purpose kernel module? And I think vhost-blk is beneficial to 
qemu too, as well as any other kvm host side implementation.

-- 
Asias

Re: [PATCH 0/5] Add vhost-blk support

[Asias He]

On 07/16/2012 07:58 PM, Stefan Hajnoczi wrote:
> On Thu, Jul 12, 2012 at 4:35 PM, Asias He <asias@redhat.com> wrote:
>> This patchset adds vhost-blk support. vhost-blk is a in kernel virito-blk
>> device accelerator. Compared to userspace virtio-blk implementation, vhost-blk
>> gives about 5% to 15% performance improvement.
>
> Why is it 5-15% faster?  vhost-blk and the userspace virtio-blk you
> benchmarked should be doing basically the same thing:
>
> 1. An eventfd file descriptor is signalled when the vring has new
> requests available from the guest.
> 2. A thread wakes up and processes the virtqueue.
> 3. Linux AIO is used to issue host I/O.
> 4. An interrupt is injected into the guest.

Yes. This is how both of them work. Though, there are some differences 
in details. e.g.

In vhost-blk, we use the vhost's work infrastructure to handle the 
requests. In kvm tool, we use a dedicated thread.
In vhost-blk, we use irqfd to inject interrupts. In kvm tool, we use 
ioctl to inject interrupts.


> Does the vhost-blk implementation do anything fundamentally different
> from userspace?  Where is the overhead that userspace virtio-blk has?


Currently, no. But we could play with bio directly in vhost-blk as 
Christoph suggested which could make the IO path from guest to host's 
real storage even shorter in vhost-blk.

I've been trying my best to reduce the overhead of virtio-blk at kvm 
tool side. I do not see any significant overhead out there. Compared to 
vhost-blk, the overhead we have in userspace virito-blk is syscalls. In 
each IO request, we have

    epoll_wait() & read(): wait for the eventfd which guest notifies us
    io_submit(): submit the aio
    read(): read the aio complete eventfd
    io_getevents(): reap the aio complete result
    ioctl(): trigger the interrupt

So, vhost-blk at least saves ~6 syscalls for us in each request.

> I'm asking because it would be beneficial to fix the overhead
> (especially it that could speed up all userspace applications) instead
> of adding a special-purpose kernel module to work around the overhead.

I guess you mean qemu here. Yes, in theory, qemu's block layer can be 
improved to achieve similar performance as vhost-blk or kvm tool's 
userspace virito-blk has. But I think it makes no sense to prevent one 
solution becase there is another in theory solution called: we can do 
similar in qemu.

What do you mean by specail-purpose here, we need general-purpose kernel
module? Is vhost-net a special purpose kernel module?  Is xen-blkback a 
special-purpose kernel module? And I think vhost-blk is beneficial to 
qemu too, as well as any other kvm host side implementation.

-- 
Asias

Re: [PATCH 0/5] Add vhost-blk support

[Asias He]

On 07/16/2012 07:58 PM, Stefan Hajnoczi wrote:
> On Thu, Jul 12, 2012 at 4:35 PM, Asias He <asias@redhat.com> wrote:
>> This patchset adds vhost-blk support. vhost-blk is a in kernel virito-blk
>> device accelerator. Compared to userspace virtio-blk implementation, vhost-blk
>> gives about 5% to 15% performance improvement.
>
> Why is it 5-15% faster?  vhost-blk and the userspace virtio-blk you
> benchmarked should be doing basically the same thing:
>
> 1. An eventfd file descriptor is signalled when the vring has new
> requests available from the guest.
> 2. A thread wakes up and processes the virtqueue.
> 3. Linux AIO is used to issue host I/O.
> 4. An interrupt is injected into the guest.

Yes. This is how both of them work. Though, there are some differences 
in details. e.g.

In vhost-blk, we use the vhost's work infrastructure to handle the 
requests. In kvm tool, we use a dedicated thread.
In vhost-blk, we use irqfd to inject interrupts. In kvm tool, we use 
ioctl to inject interrupts.


> Does the vhost-blk implementation do anything fundamentally different
> from userspace?  Where is the overhead that userspace virtio-blk has?


Currently, no. But we could play with bio directly in vhost-blk as 
Christoph suggested which could make the IO path from guest to host's 
real storage even shorter in vhost-blk.

I've been trying my best to reduce the overhead of virtio-blk at kvm 
tool side. I do not see any significant overhead out there. Compared to 
vhost-blk, the overhead we have in userspace virito-blk is syscalls. In 
each IO request, we have

    epoll_wait() & read(): wait for the eventfd which guest notifies us
    io_submit(): submit the aio
    read(): read the aio complete eventfd
    io_getevents(): reap the aio complete result
    ioctl(): trigger the interrupt

So, vhost-blk at least saves ~6 syscalls for us in each request.

> I'm asking because it would be beneficial to fix the overhead
> (especially it that could speed up all userspace applications) instead
> of adding a special-purpose kernel module to work around the overhead.

I guess you mean qemu here. Yes, in theory, qemu's block layer can be 
improved to achieve similar performance as vhost-blk or kvm tool's 
userspace virito-blk has. But I think it makes no sense to prevent one 
solution becase there is another in theory solution called: we can do 
similar in qemu.

What do you mean by specail-purpose here, we need general-purpose kernel
module? Is vhost-net a special purpose kernel module?  Is xen-blkback a 
special-purpose kernel module? And I think vhost-blk is beneficial to 
qemu too, as well as any other kvm host side implementation.

-- 
Asias


--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Paolo Bonzini]

Il 17/07/2012 10:29, Asias He ha scritto:
> So, vhost-blk at least saves ~6 syscalls for us in each request. 

Are they really 6?  If I/O is coalesced by a factor of 3, for example
(i.e. each exit processes 3 requests), it's really 2 syscalls per request.

Also, is there anything we can improve?  Perhaps we can modify epoll and
ask it to clear the eventfd for us (would save 2 reads)?  Or
io_getevents (would save 1)?

> I guess you mean qemu here. Yes, in theory, qemu's block layer can be
> improved to achieve similar performance as vhost-blk or kvm tool's
> userspace virito-blk has. But I think it makes no sense to prevent one
> solution becase there is another in theory solution called: we can do
> similar in qemu.

It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
feature set: no support for block device formats, non-raw protocols,
etc.  This makes it different from vhost-net.

So it begs the question, is it going to be used in production, or just a
useful reference tool?

Paolo

Re: [PATCH 0/5] Add vhost-blk support

[Paolo Bonzini]

Il 17/07/2012 10:29, Asias He ha scritto:
> So, vhost-blk at least saves ~6 syscalls for us in each request. 

Are they really 6?  If I/O is coalesced by a factor of 3, for example
(i.e. each exit processes 3 requests), it's really 2 syscalls per request.

Also, is there anything we can improve?  Perhaps we can modify epoll and
ask it to clear the eventfd for us (would save 2 reads)?  Or
io_getevents (would save 1)?

> I guess you mean qemu here. Yes, in theory, qemu's block layer can be
> improved to achieve similar performance as vhost-blk or kvm tool's
> userspace virito-blk has. But I think it makes no sense to prevent one
> solution becase there is another in theory solution called: we can do
> similar in qemu.

It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
feature set: no support for block device formats, non-raw protocols,
etc.  This makes it different from vhost-net.

So it begs the question, is it going to be used in production, or just a
useful reference tool?

Paolo

Re: [PATCH 0/5] Add vhost-blk support

[Paolo Bonzini]

Il 17/07/2012 10:29, Asias He ha scritto:
> So, vhost-blk at least saves ~6 syscalls for us in each request. 

Are they really 6?  If I/O is coalesced by a factor of 3, for example
(i.e. each exit processes 3 requests), it's really 2 syscalls per request.

Also, is there anything we can improve?  Perhaps we can modify epoll and
ask it to clear the eventfd for us (would save 2 reads)?  Or
io_getevents (would save 1)?

> I guess you mean qemu here. Yes, in theory, qemu's block layer can be
> improved to achieve similar performance as vhost-blk or kvm tool's
> userspace virito-blk has. But I think it makes no sense to prevent one
> solution becase there is another in theory solution called: we can do
> similar in qemu.

It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
feature set: no support for block device formats, non-raw protocols,
etc.  This makes it different from vhost-net.

So it begs the question, is it going to be used in production, or just a
useful reference tool?

Paolo

--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Asias He]

On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
> Il 17/07/2012 10:29, Asias He ha scritto:
>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>
> Are they really 6?  If I/O is coalesced by a factor of 3, for example
> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.

Well. I am counting the number of syscalls in one notify and response 
process. Sure the IO can be coalesced.

> Also, is there anything we can improve?  Perhaps we can modify epoll and
> ask it to clear the eventfd for us (would save 2 reads)?  Or
> io_getevents (would save 1)?
>
>> I guess you mean qemu here. Yes, in theory, qemu's block layer can be
>> improved to achieve similar performance as vhost-blk or kvm tool's
>> userspace virito-blk has. But I think it makes no sense to prevent one
>> solution becase there is another in theory solution called: we can do
>> similar in qemu.
>
> It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
> feature set: no support for block device formats, non-raw protocols,
> etc.  This makes it different from vhost-net.

Data-plane qemu also has this cripppled feature set problem, no? Does 
user always choose to use block devices format like qcow2? What if they 
prefer raw image or raw block device?

>
> So it begs the question, is it going to be used in production, or just a
> useful reference tool?

This should be decided by user, I can not speak for them. What is wrong 
with adding one option for user which they can decide?

-- 
Asias

Re: [PATCH 0/5] Add vhost-blk support

[Asias He]

On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
> Il 17/07/2012 10:29, Asias He ha scritto:
>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>
> Are they really 6?  If I/O is coalesced by a factor of 3, for example
> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.

Well. I am counting the number of syscalls in one notify and response 
process. Sure the IO can be coalesced.

> Also, is there anything we can improve?  Perhaps we can modify epoll and
> ask it to clear the eventfd for us (would save 2 reads)?  Or
> io_getevents (would save 1)?
>
>> I guess you mean qemu here. Yes, in theory, qemu's block layer can be
>> improved to achieve similar performance as vhost-blk or kvm tool's
>> userspace virito-blk has. But I think it makes no sense to prevent one
>> solution becase there is another in theory solution called: we can do
>> similar in qemu.
>
> It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
> feature set: no support for block device formats, non-raw protocols,
> etc.  This makes it different from vhost-net.

Data-plane qemu also has this cripppled feature set problem, no? Does 
user always choose to use block devices format like qcow2? What if they 
prefer raw image or raw block device?

>
> So it begs the question, is it going to be used in production, or just a
> useful reference tool?

This should be decided by user, I can not speak for them. What is wrong 
with adding one option for user which they can decide?

-- 
Asias

Re: [PATCH 0/5] Add vhost-blk support

[Asias He]

On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
> Il 17/07/2012 10:29, Asias He ha scritto:
>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>
> Are they really 6?  If I/O is coalesced by a factor of 3, for example
> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.

Well. I am counting the number of syscalls in one notify and response 
process. Sure the IO can be coalesced.

> Also, is there anything we can improve?  Perhaps we can modify epoll and
> ask it to clear the eventfd for us (would save 2 reads)?  Or
> io_getevents (would save 1)?
>
>> I guess you mean qemu here. Yes, in theory, qemu's block layer can be
>> improved to achieve similar performance as vhost-blk or kvm tool's
>> userspace virito-blk has. But I think it makes no sense to prevent one
>> solution becase there is another in theory solution called: we can do
>> similar in qemu.
>
> It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
> feature set: no support for block device formats, non-raw protocols,
> etc.  This makes it different from vhost-net.

Data-plane qemu also has this cripppled feature set problem, no? Does 
user always choose to use block devices format like qcow2? What if they 
prefer raw image or raw block device?

>
> So it begs the question, is it going to be used in production, or just a
> useful reference tool?

This should be decided by user, I can not speak for them. What is wrong 
with adding one option for user which they can decide?

-- 
Asias


--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Paolo Bonzini]

Il 17/07/2012 11:21, Asias He ha scritto:
>> It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
>> feature set: no support for block device formats, non-raw protocols,
>> etc.  This makes it different from vhost-net.
> 
> Data-plane qemu also has this cripppled feature set problem, no?

Yes, but that is just a proof of concept.  We can implement a separate
I/O thread within the QEMU block layer, and add fast paths that resemble
data-path QEMU, without limiting the feature set.

> Does user always choose to use block devices format like qcow2? What
> if they prefer raw image or raw block device?

If they do, the code should hit fast paths and be fast.  But it should
be automatic, without the need for extra knobs.  aio=thread vs.
aio=native is already one knob too much IMHO.

>> So it begs the question, is it going to be used in production, or just a
>> useful reference tool?
> 
> This should be decided by user, I can not speak for them. What is wrong
> with adding one option for user which they can decide?

Having to explain the user about the relative benefits; having to
support the API; having to handle transition from one more thing when
something better comes out.

Paolo

Re: [PATCH 0/5] Add vhost-blk support

[Paolo Bonzini]

Il 17/07/2012 11:21, Asias He ha scritto:
>> It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
>> feature set: no support for block device formats, non-raw protocols,
>> etc.  This makes it different from vhost-net.
> 
> Data-plane qemu also has this cripppled feature set problem, no?

Yes, but that is just a proof of concept.  We can implement a separate
I/O thread within the QEMU block layer, and add fast paths that resemble
data-path QEMU, without limiting the feature set.

> Does user always choose to use block devices format like qcow2? What
> if they prefer raw image or raw block device?

If they do, the code should hit fast paths and be fast.  But it should
be automatic, without the need for extra knobs.  aio=thread vs.
aio=native is already one knob too much IMHO.

>> So it begs the question, is it going to be used in production, or just a
>> useful reference tool?
> 
> This should be decided by user, I can not speak for them. What is wrong
> with adding one option for user which they can decide?

Having to explain the user about the relative benefits; having to
support the API; having to handle transition from one more thing when
something better comes out.

Paolo

Re: [PATCH 0/5] Add vhost-blk support

[Paolo Bonzini]

Il 17/07/2012 11:21, Asias He ha scritto:
>> It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
>> feature set: no support for block device formats, non-raw protocols,
>> etc.  This makes it different from vhost-net.
> 
> Data-plane qemu also has this cripppled feature set problem, no?

Yes, but that is just a proof of concept.  We can implement a separate
I/O thread within the QEMU block layer, and add fast paths that resemble
data-path QEMU, without limiting the feature set.

> Does user always choose to use block devices format like qcow2? What
> if they prefer raw image or raw block device?

If they do, the code should hit fast paths and be fast.  But it should
be automatic, without the need for extra knobs.  aio=thread vs.
aio=native is already one knob too much IMHO.

>> So it begs the question, is it going to be used in production, or just a
>> useful reference tool?
> 
> This should be decided by user, I can not speak for them. What is wrong
> with adding one option for user which they can decide?

Having to explain the user about the relative benefits; having to
support the API; having to handle transition from one more thing when
something better comes out.

Paolo

--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 11:32:45AM +0200, Paolo Bonzini wrote:
> Il 17/07/2012 11:21, Asias He ha scritto:
> >> It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
> >> feature set: no support for block device formats, non-raw protocols,
> >> etc.  This makes it different from vhost-net.
> > 
> > Data-plane qemu also has this cripppled feature set problem, no?
> 
> Yes, but that is just a proof of concept.  We can implement a separate
> I/O thread within the QEMU block layer, and add fast paths that resemble
> data-path QEMU, without limiting the feature set.
> 
> > Does user always choose to use block devices format like qcow2? What
> > if they prefer raw image or raw block device?
> 
> If they do, the code should hit fast paths and be fast.  But it should
> be automatic, without the need for extra knobs.  aio=thread vs.
> aio=native is already one knob too much IMHO.

Well one extra knob at qemu level is harmless IMO since
the complexity can be handled by libvirt. For vhost-net
libvirt already enables vhost automatically dependeing on backend
used and I imagine a similar thing can happen here.


> >> So it begs the question, is it going to be used in production, or just a
> >> useful reference tool?
> > 
> > This should be decided by user, I can not speak for them. What is wrong
> > with adding one option for user which they can decide?
> 
> Having to explain the user about the relative benefits;

This can just be done automatically by libvirt.

> having to
> support the API; having to handle transition from one more thing when
> something better comes out.
> 
> Paolo

Well this is true for any code. If the limited featureset which
vhost-blk can accelerate is something many people use, then accelerating
by 5-15% might outweight support costs.

-- 
MST

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 11:32:45AM +0200, Paolo Bonzini wrote:
> Il 17/07/2012 11:21, Asias He ha scritto:
> >> It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
> >> feature set: no support for block device formats, non-raw protocols,
> >> etc.  This makes it different from vhost-net.
> > 
> > Data-plane qemu also has this cripppled feature set problem, no?
> 
> Yes, but that is just a proof of concept.  We can implement a separate
> I/O thread within the QEMU block layer, and add fast paths that resemble
> data-path QEMU, without limiting the feature set.
> 
> > Does user always choose to use block devices format like qcow2? What
> > if they prefer raw image or raw block device?
> 
> If they do, the code should hit fast paths and be fast.  But it should
> be automatic, without the need for extra knobs.  aio=thread vs.
> aio=native is already one knob too much IMHO.

Well one extra knob at qemu level is harmless IMO since
the complexity can be handled by libvirt. For vhost-net
libvirt already enables vhost automatically dependeing on backend
used and I imagine a similar thing can happen here.


> >> So it begs the question, is it going to be used in production, or just a
> >> useful reference tool?
> > 
> > This should be decided by user, I can not speak for them. What is wrong
> > with adding one option for user which they can decide?
> 
> Having to explain the user about the relative benefits;

This can just be done automatically by libvirt.

> having to
> support the API; having to handle transition from one more thing when
> something better comes out.
> 
> Paolo

Well this is true for any code. If the limited featureset which
vhost-blk can accelerate is something many people use, then accelerating
by 5-15% might outweight support costs.

-- 
MST

--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 11:32:45AM +0200, Paolo Bonzini wrote:
> Il 17/07/2012 11:21, Asias He ha scritto:
> >> It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
> >> feature set: no support for block device formats, non-raw protocols,
> >> etc.  This makes it different from vhost-net.
> > 
> > Data-plane qemu also has this cripppled feature set problem, no?
> 
> Yes, but that is just a proof of concept.  We can implement a separate
> I/O thread within the QEMU block layer, and add fast paths that resemble
> data-path QEMU, without limiting the feature set.
> 
> > Does user always choose to use block devices format like qcow2? What
> > if they prefer raw image or raw block device?
> 
> If they do, the code should hit fast paths and be fast.  But it should
> be automatic, without the need for extra knobs.  aio=thread vs.
> aio=native is already one knob too much IMHO.

Well one extra knob at qemu level is harmless IMO since
the complexity can be handled by libvirt. For vhost-net
libvirt already enables vhost automatically dependeing on backend
used and I imagine a similar thing can happen here.


> >> So it begs the question, is it going to be used in production, or just a
> >> useful reference tool?
> > 
> > This should be decided by user, I can not speak for them. What is wrong
> > with adding one option for user which they can decide?
> 
> Having to explain the user about the relative benefits;

This can just be done automatically by libvirt.

> having to
> support the API; having to handle transition from one more thing when
> something better comes out.
> 
> Paolo

Well this is true for any code. If the limited featureset which
vhost-blk can accelerate is something many people use, then accelerating
by 5-15% might outweight support costs.

-- 
MST

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
> On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
>>
>> Il 17/07/2012 10:29, Asias He ha scritto:
>>>
>>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>>
>>
>> Are they really 6?  If I/O is coalesced by a factor of 3, for example
>> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
>
>
> Well. I am counting the number of syscalls in one notify and response
> process. Sure the IO can be coalesced.

Linux AIO also supports batching in io_submit() and io_getevents().
Depending on the request pattern in the vring when you process it, you
should be able to do better than 1 set of syscalls per host I/O
request.

Are you taking advantage of that at the moment in your userspace benchmark?

Stefan

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
> On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
>>
>> Il 17/07/2012 10:29, Asias He ha scritto:
>>>
>>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>>
>>
>> Are they really 6?  If I/O is coalesced by a factor of 3, for example
>> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
>
>
> Well. I am counting the number of syscalls in one notify and response
> process. Sure the IO can be coalesced.

Linux AIO also supports batching in io_submit() and io_getevents().
Depending on the request pattern in the vring when you process it, you
should be able to do better than 1 set of syscalls per host I/O
request.

Are you taking advantage of that at the moment in your userspace benchmark?

Stefan

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
> On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
>>
>> Il 17/07/2012 10:29, Asias He ha scritto:
>>>
>>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>>
>>
>> Are they really 6?  If I/O is coalesced by a factor of 3, for example
>> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
>
>
> Well. I am counting the number of syscalls in one notify and response
> process. Sure the IO can be coalesced.

Linux AIO also supports batching in io_submit() and io_getevents().
Depending on the request pattern in the vring when you process it, you
should be able to do better than 1 set of syscalls per host I/O
request.

Are you taking advantage of that at the moment in your userspace benchmark?

Stefan

--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 12:11:15PM +0100, Stefan Hajnoczi wrote:
> On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
> > On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
> >>
> >> Il 17/07/2012 10:29, Asias He ha scritto:
> >>>
> >>> So, vhost-blk at least saves ~6 syscalls for us in each request.
> >>
> >>
> >> Are they really 6?  If I/O is coalesced by a factor of 3, for example
> >> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
> >
> >
> > Well. I am counting the number of syscalls in one notify and response
> > process. Sure the IO can be coalesced.
> 
> Linux AIO also supports batching in io_submit() and io_getevents().
> Depending on the request pattern in the vring when you process it, you
> should be able to do better than 1 set of syscalls per host I/O
> request.
> 
> Are you taking advantage of that at the moment in your userspace benchmark?
> 
> Stefan

Injecting an interrupt directly from kernel bypasses two context switches.
Yes some worloads can coalesce interrupts efficiently but others can't.
It is not really hard to speculate more.

Personally I don't understand where all this speculation leads us.
Are you guys disputing the measurements posted? If not would not
it be better if discussion focused on the amount of extra code versus
measured gain?

-- 
MST

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 12:11:15PM +0100, Stefan Hajnoczi wrote:
> On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
> > On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
> >>
> >> Il 17/07/2012 10:29, Asias He ha scritto:
> >>>
> >>> So, vhost-blk at least saves ~6 syscalls for us in each request.
> >>
> >>
> >> Are they really 6?  If I/O is coalesced by a factor of 3, for example
> >> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
> >
> >
> > Well. I am counting the number of syscalls in one notify and response
> > process. Sure the IO can be coalesced.
> 
> Linux AIO also supports batching in io_submit() and io_getevents().
> Depending on the request pattern in the vring when you process it, you
> should be able to do better than 1 set of syscalls per host I/O
> request.
> 
> Are you taking advantage of that at the moment in your userspace benchmark?
> 
> Stefan

Injecting an interrupt directly from kernel bypasses two context switches.
Yes some worloads can coalesce interrupts efficiently but others can't.
It is not really hard to speculate more.

Personally I don't understand where all this speculation leads us.
Are you guys disputing the measurements posted? If not would not
it be better if discussion focused on the amount of extra code versus
measured gain?

-- 
MST

--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Tue, Jul 17, 2012 at 12:26 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
> On Tue, Jul 17, 2012 at 12:11:15PM +0100, Stefan Hajnoczi wrote:
>> On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
>> > On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
>> >>
>> >> Il 17/07/2012 10:29, Asias He ha scritto:
>> >>>
>> >>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>> >>
>> >>
>> >> Are they really 6?  If I/O is coalesced by a factor of 3, for example
>> >> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
>> >
>> >
>> > Well. I am counting the number of syscalls in one notify and response
>> > process. Sure the IO can be coalesced.
>>
>> Linux AIO also supports batching in io_submit() and io_getevents().
>> Depending on the request pattern in the vring when you process it, you
>> should be able to do better than 1 set of syscalls per host I/O
>> request.
>>
>> Are you taking advantage of that at the moment in your userspace benchmark?
>>
>> Stefan
>
> Injecting an interrupt directly from kernel bypasses two context switches.
> Yes some worloads can coalesce interrupts efficiently but others can't.
> It is not really hard to speculate more.
>
> Personally I don't understand where all this speculation leads us.
> Are you guys disputing the measurements posted? If not would not
> it be better if discussion focused on the amount of extra code versus
> measured gain?

5-15% is nice.  But what causes the performance advantage?

Knowing the answer to that is important before anyone can say whether
this approach is good or not.

Stefan

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Tue, Jul 17, 2012 at 12:26 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
> On Tue, Jul 17, 2012 at 12:11:15PM +0100, Stefan Hajnoczi wrote:
>> On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
>> > On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
>> >>
>> >> Il 17/07/2012 10:29, Asias He ha scritto:
>> >>>
>> >>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>> >>
>> >>
>> >> Are they really 6?  If I/O is coalesced by a factor of 3, for example
>> >> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
>> >
>> >
>> > Well. I am counting the number of syscalls in one notify and response
>> > process. Sure the IO can be coalesced.
>>
>> Linux AIO also supports batching in io_submit() and io_getevents().
>> Depending on the request pattern in the vring when you process it, you
>> should be able to do better than 1 set of syscalls per host I/O
>> request.
>>
>> Are you taking advantage of that at the moment in your userspace benchmark?
>>
>> Stefan
>
> Injecting an interrupt directly from kernel bypasses two context switches.
> Yes some worloads can coalesce interrupts efficiently but others can't.
> It is not really hard to speculate more.
>
> Personally I don't understand where all this speculation leads us.
> Are you guys disputing the measurements posted? If not would not
> it be better if discussion focused on the amount of extra code versus
> measured gain?

5-15% is nice.  But what causes the performance advantage?

Knowing the answer to that is important before anyone can say whether
this approach is good or not.

Stefan

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Tue, Jul 17, 2012 at 12:42 PM, Stefan Hajnoczi <stefanha@gmail.com> wrote:
> On Tue, Jul 17, 2012 at 12:26 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
>> On Tue, Jul 17, 2012 at 12:11:15PM +0100, Stefan Hajnoczi wrote:
>>> On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
>>> > On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
>>> >>
>>> >> Il 17/07/2012 10:29, Asias He ha scritto:
>>> >>>
>>> >>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>>> >>
>>> >>
>>> >> Are they really 6?  If I/O is coalesced by a factor of 3, for example
>>> >> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
>>> >
>>> >
>>> > Well. I am counting the number of syscalls in one notify and response
>>> > process. Sure the IO can be coalesced.
>>>
>>> Linux AIO also supports batching in io_submit() and io_getevents().
>>> Depending on the request pattern in the vring when you process it, you
>>> should be able to do better than 1 set of syscalls per host I/O
>>> request.
>>>
>>> Are you taking advantage of that at the moment in your userspace benchmark?
>>>
>>> Stefan
>>
>> Injecting an interrupt directly from kernel bypasses two context switches.
>> Yes some worloads can coalesce interrupts efficiently but others can't.
>> It is not really hard to speculate more.
>>
>> Personally I don't understand where all this speculation leads us.
>> Are you guys disputing the measurements posted? If not would not
>> it be better if discussion focused on the amount of extra code versus
>> measured gain?
>
> 5-15% is nice.  But what causes the performance advantage?

To be clear, I suggest posting profiling results and explaining the
improvement over kvmtool.

Stefan

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Tue, Jul 17, 2012 at 12:42 PM, Stefan Hajnoczi <stefanha@gmail.com> wrote:
> On Tue, Jul 17, 2012 at 12:26 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
>> On Tue, Jul 17, 2012 at 12:11:15PM +0100, Stefan Hajnoczi wrote:
>>> On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
>>> > On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
>>> >>
>>> >> Il 17/07/2012 10:29, Asias He ha scritto:
>>> >>>
>>> >>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>>> >>
>>> >>
>>> >> Are they really 6?  If I/O is coalesced by a factor of 3, for example
>>> >> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
>>> >
>>> >
>>> > Well. I am counting the number of syscalls in one notify and response
>>> > process. Sure the IO can be coalesced.
>>>
>>> Linux AIO also supports batching in io_submit() and io_getevents().
>>> Depending on the request pattern in the vring when you process it, you
>>> should be able to do better than 1 set of syscalls per host I/O
>>> request.
>>>
>>> Are you taking advantage of that at the moment in your userspace benchmark?
>>>
>>> Stefan
>>
>> Injecting an interrupt directly from kernel bypasses two context switches.
>> Yes some worloads can coalesce interrupts efficiently but others can't.
>> It is not really hard to speculate more.
>>
>> Personally I don't understand where all this speculation leads us.
>> Are you guys disputing the measurements posted? If not would not
>> it be better if discussion focused on the amount of extra code versus
>> measured gain?
>
> 5-15% is nice.  But what causes the performance advantage?

To be clear, I suggest posting profiling results and explaining the
improvement over kvmtool.

Stefan

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 12:42:13PM +0100, Stefan Hajnoczi wrote:
> On Tue, Jul 17, 2012 at 12:26 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
> > On Tue, Jul 17, 2012 at 12:11:15PM +0100, Stefan Hajnoczi wrote:
> >> On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
> >> > On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
> >> >>
> >> >> Il 17/07/2012 10:29, Asias He ha scritto:
> >> >>>
> >> >>> So, vhost-blk at least saves ~6 syscalls for us in each request.
> >> >>
> >> >>
> >> >> Are they really 6?  If I/O is coalesced by a factor of 3, for example
> >> >> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
> >> >
> >> >
> >> > Well. I am counting the number of syscalls in one notify and response
> >> > process. Sure the IO can be coalesced.
> >>
> >> Linux AIO also supports batching in io_submit() and io_getevents().
> >> Depending on the request pattern in the vring when you process it, you
> >> should be able to do better than 1 set of syscalls per host I/O
> >> request.
> >>
> >> Are you taking advantage of that at the moment in your userspace benchmark?
> >>
> >> Stefan
> >
> > Injecting an interrupt directly from kernel bypasses two context switches.
> > Yes some worloads can coalesce interrupts efficiently but others can't.
> > It is not really hard to speculate more.
> >
> > Personally I don't understand where all this speculation leads us.
> > Are you guys disputing the measurements posted? If not would not
> > it be better if discussion focused on the amount of extra code versus
> > measured gain?
> 
> 5-15% is nice.  But what causes the performance advantage?

Well, check the number of interrupts. If it's high then that is
part of it.

> Knowing the answer to that is important before anyone can say whether
> this approach is good or not.
> 
> Stefan

Why is it?

-- 
MST

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 12:42:13PM +0100, Stefan Hajnoczi wrote:
> On Tue, Jul 17, 2012 at 12:26 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
> > On Tue, Jul 17, 2012 at 12:11:15PM +0100, Stefan Hajnoczi wrote:
> >> On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
> >> > On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
> >> >>
> >> >> Il 17/07/2012 10:29, Asias He ha scritto:
> >> >>>
> >> >>> So, vhost-blk at least saves ~6 syscalls for us in each request.
> >> >>
> >> >>
> >> >> Are they really 6?  If I/O is coalesced by a factor of 3, for example
> >> >> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
> >> >
> >> >
> >> > Well. I am counting the number of syscalls in one notify and response
> >> > process. Sure the IO can be coalesced.
> >>
> >> Linux AIO also supports batching in io_submit() and io_getevents().
> >> Depending on the request pattern in the vring when you process it, you
> >> should be able to do better than 1 set of syscalls per host I/O
> >> request.
> >>
> >> Are you taking advantage of that at the moment in your userspace benchmark?
> >>
> >> Stefan
> >
> > Injecting an interrupt directly from kernel bypasses two context switches.
> > Yes some worloads can coalesce interrupts efficiently but others can't.
> > It is not really hard to speculate more.
> >
> > Personally I don't understand where all this speculation leads us.
> > Are you guys disputing the measurements posted? If not would not
> > it be better if discussion focused on the amount of extra code versus
> > measured gain?
> 
> 5-15% is nice.  But what causes the performance advantage?

Well, check the number of interrupts. If it's high then that is
part of it.

> Knowing the answer to that is important before anyone can say whether
> this approach is good or not.
> 
> Stefan

Why is it?

-- 
MST

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 12:42:13PM +0100, Stefan Hajnoczi wrote:
> On Tue, Jul 17, 2012 at 12:26 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
> > On Tue, Jul 17, 2012 at 12:11:15PM +0100, Stefan Hajnoczi wrote:
> >> On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
> >> > On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
> >> >>
> >> >> Il 17/07/2012 10:29, Asias He ha scritto:
> >> >>>
> >> >>> So, vhost-blk at least saves ~6 syscalls for us in each request.
> >> >>
> >> >>
> >> >> Are they really 6?  If I/O is coalesced by a factor of 3, for example
> >> >> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
> >> >
> >> >
> >> > Well. I am counting the number of syscalls in one notify and response
> >> > process. Sure the IO can be coalesced.
> >>
> >> Linux AIO also supports batching in io_submit() and io_getevents().
> >> Depending on the request pattern in the vring when you process it, you
> >> should be able to do better than 1 set of syscalls per host I/O
> >> request.
> >>
> >> Are you taking advantage of that at the moment in your userspace benchmark?
> >>
> >> Stefan
> >
> > Injecting an interrupt directly from kernel bypasses two context switches.
> > Yes some worloads can coalesce interrupts efficiently but others can't.
> > It is not really hard to speculate more.
> >
> > Personally I don't understand where all this speculation leads us.
> > Are you guys disputing the measurements posted? If not would not
> > it be better if discussion focused on the amount of extra code versus
> > measured gain?
> 
> 5-15% is nice.  But what causes the performance advantage?

Well, check the number of interrupts. If it's high then that is
part of it.

> Knowing the answer to that is important before anyone can say whether
> this approach is good or not.
> 
> Stefan

Why is it?

-- 
MST

--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Tue, Jul 17, 2012 at 12:54 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
>> Knowing the answer to that is important before anyone can say whether
>> this approach is good or not.
>>
>> Stefan
>
> Why is it?

Because there might be a fix to kvmtool which closes the gap.  It
would be embarassing if vhost-blk was pushed just because no one
looked into what is actually going on.

And on the flipside, hard evidence of an overhead that cannot be
resolved could be good reason to do more vhost devices in the future.
Either way, it's useful to do this before going further.

Stefan

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Tue, Jul 17, 2012 at 12:54 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
>> Knowing the answer to that is important before anyone can say whether
>> this approach is good or not.
>>
>> Stefan
>
> Why is it?

Because there might be a fix to kvmtool which closes the gap.  It
would be embarassing if vhost-blk was pushed just because no one
looked into what is actually going on.

And on the flipside, hard evidence of an overhead that cannot be
resolved could be good reason to do more vhost devices in the future.
Either way, it's useful to do this before going further.

Stefan

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 01:03:39PM +0100, Stefan Hajnoczi wrote:
> On Tue, Jul 17, 2012 at 12:54 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
> >> Knowing the answer to that is important before anyone can say whether
> >> this approach is good or not.
> >>
> >> Stefan
> >
> > Why is it?
> 
> Because there might be a fix to kvmtool which closes the gap.  It
> would be embarassing if vhost-blk was pushed just because no one
> looked into what is actually going on.

Embarrasing to whom? Is someone working on an optimization that
makes the work in question redundant, with posting just around
the corner? Then maybe the thing to do is just wait a bit.

Or are there no specific plans even, just a vague "sometime
in the future someone might take Asias' patches and profile them see if
anything maybe sticks out"? Then maybe not making everyone
wait years for this will serve users better.

> And on the flipside, hard evidence of an overhead that cannot be
> resolved could be good reason to do more vhost devices in the future.

How can one have hard evidence of an overhead that cannot be resolved?
Any problem can be resolved in an infinite number of ways.

> Either way, it's useful to do this before going further.
> 
> Stefan

I think each work should be discussed on its own merits.  Maybe
vhost-blk is just well written. So? What is your conclusion?

-- 
MST

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 01:03:39PM +0100, Stefan Hajnoczi wrote:
> On Tue, Jul 17, 2012 at 12:54 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
> >> Knowing the answer to that is important before anyone can say whether
> >> this approach is good or not.
> >>
> >> Stefan
> >
> > Why is it?
> 
> Because there might be a fix to kvmtool which closes the gap.  It
> would be embarassing if vhost-blk was pushed just because no one
> looked into what is actually going on.

Embarrasing to whom? Is someone working on an optimization that
makes the work in question redundant, with posting just around
the corner? Then maybe the thing to do is just wait a bit.

Or are there no specific plans even, just a vague "sometime
in the future someone might take Asias' patches and profile them see if
anything maybe sticks out"? Then maybe not making everyone
wait years for this will serve users better.

> And on the flipside, hard evidence of an overhead that cannot be
> resolved could be good reason to do more vhost devices in the future.

How can one have hard evidence of an overhead that cannot be resolved?
Any problem can be resolved in an infinite number of ways.

> Either way, it's useful to do this before going further.
> 
> Stefan

I think each work should be discussed on its own merits.  Maybe
vhost-blk is just well written. So? What is your conclusion?

-- 
MST

--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Paolo Bonzini]

Il 17/07/2012 14:48, Michael S. Tsirkin ha scritto:
> On Tue, Jul 17, 2012 at 01:03:39PM +0100, Stefan Hajnoczi wrote:
>> On Tue, Jul 17, 2012 at 12:54 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
>>>> Knowing the answer to that is important before anyone can say whether
>>>> this approach is good or not.
>>>>
>>>> Stefan
>>>
>>> Why is it?
>>
>> Because there might be a fix to kvmtool which closes the gap.  It
>> would be embarassing if vhost-blk was pushed just because no one
>> looked into what is actually going on.
> 
> Embarrasing to whom? Is someone working on an optimization that
> makes the work in question redundant, with posting just around
> the corner? Then maybe the thing to do is just wait a bit.

Of course there is work going on to make QEMU perform better.  Not sure
about lkvm.

>> And on the flipside, hard evidence of an overhead that cannot be
>> resolved could be good reason to do more vhost devices in the future.
> 
> How can one have hard evidence of an overhead that cannot be resolved?

Since we do have two completely independent userspaces (lkvm and
data-plane QEMU), you can build up some compelling evidence of an
overhead that cannot be resolved in user space.

>> Either way, it's useful to do this before going further.
> 
> I think each work should be discussed on its own merits.  Maybe
> vhost-blk is just well written. So? What is your conclusion?

If it's just that vhost-blk is written well, my conclusion is that lkvm
people should look into improving their virtio-blk userspace.  We take
hints from each other all the time, for example virtio-scsi will have
unlocked kick in 3.6.

Why can't vhost-* just get into staging, and we call it a day?

Paolo

Re: [PATCH 0/5] Add vhost-blk support

[Paolo Bonzini]

Il 17/07/2012 14:48, Michael S. Tsirkin ha scritto:
> On Tue, Jul 17, 2012 at 01:03:39PM +0100, Stefan Hajnoczi wrote:
>> On Tue, Jul 17, 2012 at 12:54 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
>>>> Knowing the answer to that is important before anyone can say whether
>>>> this approach is good or not.
>>>>
>>>> Stefan
>>>
>>> Why is it?
>>
>> Because there might be a fix to kvmtool which closes the gap.  It
>> would be embarassing if vhost-blk was pushed just because no one
>> looked into what is actually going on.
> 
> Embarrasing to whom? Is someone working on an optimization that
> makes the work in question redundant, with posting just around
> the corner? Then maybe the thing to do is just wait a bit.

Of course there is work going on to make QEMU perform better.  Not sure
about lkvm.

>> And on the flipside, hard evidence of an overhead that cannot be
>> resolved could be good reason to do more vhost devices in the future.
> 
> How can one have hard evidence of an overhead that cannot be resolved?

Since we do have two completely independent userspaces (lkvm and
data-plane QEMU), you can build up some compelling evidence of an
overhead that cannot be resolved in user space.

>> Either way, it's useful to do this before going further.
> 
> I think each work should be discussed on its own merits.  Maybe
> vhost-blk is just well written. So? What is your conclusion?

If it's just that vhost-blk is written well, my conclusion is that lkvm
people should look into improving their virtio-blk userspace.  We take
hints from each other all the time, for example virtio-scsi will have
unlocked kick in 3.6.

Why can't vhost-* just get into staging, and we call it a day?

Paolo

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 03:02:45PM +0200, Paolo Bonzini wrote:
> Il 17/07/2012 14:48, Michael S. Tsirkin ha scritto:
> > On Tue, Jul 17, 2012 at 01:03:39PM +0100, Stefan Hajnoczi wrote:
> >> On Tue, Jul 17, 2012 at 12:54 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
> >>>> Knowing the answer to that is important before anyone can say whether
> >>>> this approach is good or not.
> >>>>
> >>>> Stefan
> >>>
> >>> Why is it?
> >>
> >> Because there might be a fix to kvmtool which closes the gap.  It
> >> would be embarassing if vhost-blk was pushed just because no one
> >> looked into what is actually going on.
> > 
> > Embarrasing to whom? Is someone working on an optimization that
> > makes the work in question redundant, with posting just around
> > the corner? Then maybe the thing to do is just wait a bit.
> 
> Of course there is work going on to make QEMU perform better.
> Not sure about lkvm.
> 
> >> And on the flipside, hard evidence of an overhead that cannot be
> >> resolved could be good reason to do more vhost devices in the future.
> > 
> > How can one have hard evidence of an overhead that cannot be resolved?
> 
> Since we do have two completely independent userspaces (lkvm and
> data-plane QEMU), you can build up some compelling evidence of an
> overhead that cannot be resolved in user space.

OK, so what you are saying benchmark against data-plane QEMU?
I agree actually. Asias, any data?

> >> Either way, it's useful to do this before going further.
> > 
> > I think each work should be discussed on its own merits.  Maybe
> > vhost-blk is just well written. So? What is your conclusion?
> 
> If it's just that vhost-blk is written well, my conclusion is that lkvm
> people should look into improving their virtio-blk userspace.  We take
> hints from each other all the time, for example virtio-scsi will have
> unlocked kick in 3.6.
> 
> Why can't vhost-* just get into staging, and we call it a day?
> 
> Paolo

staging is not a destination. Even if we put a driver in staging it
won't stay there indefinitely if qemu-kvm is not using it,
something that doesn't seem to be addressed for vhost-blk yet.

-- 
MST

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 03:02:45PM +0200, Paolo Bonzini wrote:
> Il 17/07/2012 14:48, Michael S. Tsirkin ha scritto:
> > On Tue, Jul 17, 2012 at 01:03:39PM +0100, Stefan Hajnoczi wrote:
> >> On Tue, Jul 17, 2012 at 12:54 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
> >>>> Knowing the answer to that is important before anyone can say whether
> >>>> this approach is good or not.
> >>>>
> >>>> Stefan
> >>>
> >>> Why is it?
> >>
> >> Because there might be a fix to kvmtool which closes the gap.  It
> >> would be embarassing if vhost-blk was pushed just because no one
> >> looked into what is actually going on.
> > 
> > Embarrasing to whom? Is someone working on an optimization that
> > makes the work in question redundant, with posting just around
> > the corner? Then maybe the thing to do is just wait a bit.
> 
> Of course there is work going on to make QEMU perform better.
> Not sure about lkvm.
> 
> >> And on the flipside, hard evidence of an overhead that cannot be
> >> resolved could be good reason to do more vhost devices in the future.
> > 
> > How can one have hard evidence of an overhead that cannot be resolved?
> 
> Since we do have two completely independent userspaces (lkvm and
> data-plane QEMU), you can build up some compelling evidence of an
> overhead that cannot be resolved in user space.

OK, so what you are saying benchmark against data-plane QEMU?
I agree actually. Asias, any data?

> >> Either way, it's useful to do this before going further.
> > 
> > I think each work should be discussed on its own merits.  Maybe
> > vhost-blk is just well written. So? What is your conclusion?
> 
> If it's just that vhost-blk is written well, my conclusion is that lkvm
> people should look into improving their virtio-blk userspace.  We take
> hints from each other all the time, for example virtio-scsi will have
> unlocked kick in 3.6.
> 
> Why can't vhost-* just get into staging, and we call it a day?
> 
> Paolo

staging is not a destination. Even if we put a driver in staging it
won't stay there indefinitely if qemu-kvm is not using it,
something that doesn't seem to be addressed for vhost-blk yet.

-- 
MST

Re: [PATCH 0/5] Add vhost-blk support

[Asias He]

On 07/17/2012 09:02 PM, Paolo Bonzini wrote:
> Il 17/07/2012 14:48, Michael S. Tsirkin ha scritto:
>> On Tue, Jul 17, 2012 at 01:03:39PM +0100, Stefan Hajnoczi wrote:
>>> On Tue, Jul 17, 2012 at 12:54 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
>>>>> Knowing the answer to that is important before anyone can say whether
>>>>> this approach is good or not.
>>>>>
>>>>> Stefan
>>>>
>>>> Why is it?
>>>
>>> Because there might be a fix to kvmtool which closes the gap.  It
>>> would be embarassing if vhost-blk was pushed just because no one
>>> looked into what is actually going on.
>>
>> Embarrasing to whom? Is someone working on an optimization that
>> makes the work in question redundant, with posting just around
>> the corner? Then maybe the thing to do is just wait a bit.
>
> Of course there is work going on to make QEMU perform better.  Not sure
> about lkvm.

Of course for lkvm also.

>>> And on the flipside, hard evidence of an overhead that cannot be
>>> resolved could be good reason to do more vhost devices in the future.
>>
>> How can one have hard evidence of an overhead that cannot be resolved?
>
> Since we do have two completely independent userspaces (lkvm and
> data-plane QEMU), you can build up some compelling evidence of an
> overhead that cannot be resolved in user space.

This does not build the hard evidence either. How can one prove that 
userspace lkvm and data-plane QEMU can not be improved further? The same 
for vhost-blk.

>>> Either way, it's useful to do this before going further.
>>
>> I think each work should be discussed on its own merits.  Maybe
>> vhost-blk is just well written. So? What is your conclusion?
>
> If it's just that vhost-blk is written well, my conclusion is that lkvm
> people should look into improving their virtio-blk userspace.  We take
> hints from each other all the time, for example virtio-scsi will have
> unlocked kick in 3.6.
>
> Why can't vhost-* just get into staging, and we call it a day?

OK. I'm fine with staging.

-- 
Asias

Re: [PATCH 0/5] Add vhost-blk support

[Asias He]

On 07/17/2012 09:02 PM, Paolo Bonzini wrote:
> Il 17/07/2012 14:48, Michael S. Tsirkin ha scritto:
>> On Tue, Jul 17, 2012 at 01:03:39PM +0100, Stefan Hajnoczi wrote:
>>> On Tue, Jul 17, 2012 at 12:54 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
>>>>> Knowing the answer to that is important before anyone can say whether
>>>>> this approach is good or not.
>>>>>
>>>>> Stefan
>>>>
>>>> Why is it?
>>>
>>> Because there might be a fix to kvmtool which closes the gap.  It
>>> would be embarassing if vhost-blk was pushed just because no one
>>> looked into what is actually going on.
>>
>> Embarrasing to whom? Is someone working on an optimization that
>> makes the work in question redundant, with posting just around
>> the corner? Then maybe the thing to do is just wait a bit.
>
> Of course there is work going on to make QEMU perform better.  Not sure
> about lkvm.

Of course for lkvm also.

>>> And on the flipside, hard evidence of an overhead that cannot be
>>> resolved could be good reason to do more vhost devices in the future.
>>
>> How can one have hard evidence of an overhead that cannot be resolved?
>
> Since we do have two completely independent userspaces (lkvm and
> data-plane QEMU), you can build up some compelling evidence of an
> overhead that cannot be resolved in user space.

This does not build the hard evidence either. How can one prove that 
userspace lkvm and data-plane QEMU can not be improved further? The same 
for vhost-blk.

>>> Either way, it's useful to do this before going further.
>>
>> I think each work should be discussed on its own merits.  Maybe
>> vhost-blk is just well written. So? What is your conclusion?
>
> If it's just that vhost-blk is written well, my conclusion is that lkvm
> people should look into improving their virtio-blk userspace.  We take
> hints from each other all the time, for example virtio-scsi will have
> unlocked kick in 3.6.
>
> Why can't vhost-* just get into staging, and we call it a day?

OK. I'm fine with staging.

-- 
Asias

Re: [PATCH 0/5] Add vhost-blk support

[Asias He]

On 07/17/2012 09:02 PM, Paolo Bonzini wrote:
> Il 17/07/2012 14:48, Michael S. Tsirkin ha scritto:
>> On Tue, Jul 17, 2012 at 01:03:39PM +0100, Stefan Hajnoczi wrote:
>>> On Tue, Jul 17, 2012 at 12:54 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
>>>>> Knowing the answer to that is important before anyone can say whether
>>>>> this approach is good or not.
>>>>>
>>>>> Stefan
>>>>
>>>> Why is it?
>>>
>>> Because there might be a fix to kvmtool which closes the gap.  It
>>> would be embarassing if vhost-blk was pushed just because no one
>>> looked into what is actually going on.
>>
>> Embarrasing to whom? Is someone working on an optimization that
>> makes the work in question redundant, with posting just around
>> the corner? Then maybe the thing to do is just wait a bit.
>
> Of course there is work going on to make QEMU perform better.  Not sure
> about lkvm.

Of course for lkvm also.

>>> And on the flipside, hard evidence of an overhead that cannot be
>>> resolved could be good reason to do more vhost devices in the future.
>>
>> How can one have hard evidence of an overhead that cannot be resolved?
>
> Since we do have two completely independent userspaces (lkvm and
> data-plane QEMU), you can build up some compelling evidence of an
> overhead that cannot be resolved in user space.

This does not build the hard evidence either. How can one prove that 
userspace lkvm and data-plane QEMU can not be improved further? The same 
for vhost-blk.

>>> Either way, it's useful to do this before going further.
>>
>> I think each work should be discussed on its own merits.  Maybe
>> vhost-blk is just well written. So? What is your conclusion?
>
> If it's just that vhost-blk is written well, my conclusion is that lkvm
> people should look into improving their virtio-blk userspace.  We take
> hints from each other all the time, for example virtio-scsi will have
> unlocked kick in 3.6.
>
> Why can't vhost-* just get into staging, and we call it a day?

OK. I'm fine with staging.

-- 
Asias


--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 01:03:39PM +0100, Stefan Hajnoczi wrote:
> On Tue, Jul 17, 2012 at 12:54 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
> >> Knowing the answer to that is important before anyone can say whether
> >> this approach is good or not.
> >>
> >> Stefan
> >
> > Why is it?
> 
> Because there might be a fix to kvmtool which closes the gap.  It
> would be embarassing if vhost-blk was pushed just because no one
> looked into what is actually going on.

Embarrasing to whom? Is someone working on an optimization that
makes the work in question redundant, with posting just around
the corner? Then maybe the thing to do is just wait a bit.

Or are there no specific plans even, just a vague "sometime
in the future someone might take Asias' patches and profile them see if
anything maybe sticks out"? Then maybe not making everyone
wait years for this will serve users better.

> And on the flipside, hard evidence of an overhead that cannot be
> resolved could be good reason to do more vhost devices in the future.

How can one have hard evidence of an overhead that cannot be resolved?
Any problem can be resolved in an infinite number of ways.

> Either way, it's useful to do this before going further.
> 
> Stefan

I think each work should be discussed on its own merits.  Maybe
vhost-blk is just well written. So? What is your conclusion?

-- 
MST

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 12:11:15PM +0100, Stefan Hajnoczi wrote:
> On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
> > On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
> >>
> >> Il 17/07/2012 10:29, Asias He ha scritto:
> >>>
> >>> So, vhost-blk at least saves ~6 syscalls for us in each request.
> >>
> >>
> >> Are they really 6?  If I/O is coalesced by a factor of 3, for example
> >> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
> >
> >
> > Well. I am counting the number of syscalls in one notify and response
> > process. Sure the IO can be coalesced.
> 
> Linux AIO also supports batching in io_submit() and io_getevents().
> Depending on the request pattern in the vring when you process it, you
> should be able to do better than 1 set of syscalls per host I/O
> request.
> 
> Are you taking advantage of that at the moment in your userspace benchmark?
> 
> Stefan

Injecting an interrupt directly from kernel bypasses two context switches.
Yes some worloads can coalesce interrupts efficiently but others can't.
It is not really hard to speculate more.

Personally I don't understand where all this speculation leads us.
Are you guys disputing the measurements posted? If not would not
it be better if discussion focused on the amount of extra code versus
measured gain?

-- 
MST

Re: [PATCH 0/5] Add vhost-blk support

[Asias He]

On 07/17/2012 07:11 PM, Stefan Hajnoczi wrote:
> On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
>> On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
>>>
>>> Il 17/07/2012 10:29, Asias He ha scritto:
>>>>
>>>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>>>
>>>
>>> Are they really 6?  If I/O is coalesced by a factor of 3, for example
>>> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
>>
>>
>> Well. I am counting the number of syscalls in one notify and response
>> process. Sure the IO can be coalesced.
>
> Linux AIO also supports batching in io_submit() and io_getevents().
> Depending on the request pattern in the vring when you process it, you
> should be able to do better than 1 set of syscalls per host I/O
> request.
>
> Are you taking advantage of that at the moment in your userspace benchmark?

OK. I know that batching in io_submit() and io_getevetns(). There was a 
patch for kvm tool long time ago. Now, both vhost-blk and kvm tool are 
not taking advantage of that atm. There are issues: e.g. How many number 
of request we want to batch? Does this batching hurt latency?

-- 
Asias

Re: [PATCH 0/5] Add vhost-blk support

[Asias He]

On 07/17/2012 07:11 PM, Stefan Hajnoczi wrote:
> On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
>> On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
>>>
>>> Il 17/07/2012 10:29, Asias He ha scritto:
>>>>
>>>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>>>
>>>
>>> Are they really 6?  If I/O is coalesced by a factor of 3, for example
>>> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
>>
>>
>> Well. I am counting the number of syscalls in one notify and response
>> process. Sure the IO can be coalesced.
>
> Linux AIO also supports batching in io_submit() and io_getevents().
> Depending on the request pattern in the vring when you process it, you
> should be able to do better than 1 set of syscalls per host I/O
> request.
>
> Are you taking advantage of that at the moment in your userspace benchmark?

OK. I know that batching in io_submit() and io_getevetns(). There was a 
patch for kvm tool long time ago. Now, both vhost-blk and kvm tool are 
not taking advantage of that atm. There are issues: e.g. How many number 
of request we want to batch? Does this batching hurt latency?

-- 
Asias

Re: [PATCH 0/5] Add vhost-blk support

[Asias He]

On 07/17/2012 07:11 PM, Stefan Hajnoczi wrote:
> On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
>> On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
>>>
>>> Il 17/07/2012 10:29, Asias He ha scritto:
>>>>
>>>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>>>
>>>
>>> Are they really 6?  If I/O is coalesced by a factor of 3, for example
>>> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
>>
>>
>> Well. I am counting the number of syscalls in one notify and response
>> process. Sure the IO can be coalesced.
>
> Linux AIO also supports batching in io_submit() and io_getevents().
> Depending on the request pattern in the vring when you process it, you
> should be able to do better than 1 set of syscalls per host I/O
> request.
>
> Are you taking advantage of that at the moment in your userspace benchmark?

OK. I know that batching in io_submit() and io_getevetns(). There was a 
patch for kvm tool long time ago. Now, both vhost-blk and kvm tool are 
not taking advantage of that atm. There are issues: e.g. How many number 
of request we want to batch? Does this batching hurt latency?

-- 
Asias


--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Wed, Jul 18, 2012 at 9:12 AM, Asias He <asias@redhat.com> wrote:
> On 07/17/2012 07:11 PM, Stefan Hajnoczi wrote:
>>
>> On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
>>>
>>> On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
>>>>
>>>>
>>>> Il 17/07/2012 10:29, Asias He ha scritto:
>>>>>
>>>>>
>>>>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>>>>
>>>>
>>>>
>>>> Are they really 6?  If I/O is coalesced by a factor of 3, for example
>>>> (i.e. each exit processes 3 requests), it's really 2 syscalls per
>>>> request.
>>>
>>>
>>>
>>> Well. I am counting the number of syscalls in one notify and response
>>> process. Sure the IO can be coalesced.
>>
>>
>> Linux AIO also supports batching in io_submit() and io_getevents().
>> Depending on the request pattern in the vring when you process it, you
>> should be able to do better than 1 set of syscalls per host I/O
>> request.
>>
>> Are you taking advantage of that at the moment in your userspace
>> benchmark?
>
>
> OK. I know that batching in io_submit() and io_getevetns(). There was a
> patch for kvm tool long time ago. Now, both vhost-blk and kvm tool are not
> taking advantage of that atm. There are issues: e.g. How many number of
> request we want to batch? Does this batching hurt latency?

I didn't mean introducing a delay so that multiple requests can be batched.

I was just thinking of the simple case: when there are a lot of
parallel requests the chance increases that a single vring interrupt
provides several I/O requests.  In that case it's easy for the
virtio-blk implementation to issue them all in one io_submit(2) call.
The same is true for io_getevents(2), there might be several completed
host I/O requests.

The reason I mentioned this was because the actual syscall pattern per
request might not require 1 io_submit(2)/io_getevents(2) if you are
processing a lot of requests in parallel.  The only way to know why
kvmtool is slower is by profiling...

Stefan

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Wed, Jul 18, 2012 at 9:12 AM, Asias He <asias@redhat.com> wrote:
> On 07/17/2012 07:11 PM, Stefan Hajnoczi wrote:
>>
>> On Tue, Jul 17, 2012 at 10:21 AM, Asias He <asias@redhat.com> wrote:
>>>
>>> On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
>>>>
>>>>
>>>> Il 17/07/2012 10:29, Asias He ha scritto:
>>>>>
>>>>>
>>>>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>>>>
>>>>
>>>>
>>>> Are they really 6?  If I/O is coalesced by a factor of 3, for example
>>>> (i.e. each exit processes 3 requests), it's really 2 syscalls per
>>>> request.
>>>
>>>
>>>
>>> Well. I am counting the number of syscalls in one notify and response
>>> process. Sure the IO can be coalesced.
>>
>>
>> Linux AIO also supports batching in io_submit() and io_getevents().
>> Depending on the request pattern in the vring when you process it, you
>> should be able to do better than 1 set of syscalls per host I/O
>> request.
>>
>> Are you taking advantage of that at the moment in your userspace
>> benchmark?
>
>
> OK. I know that batching in io_submit() and io_getevetns(). There was a
> patch for kvm tool long time ago. Now, both vhost-blk and kvm tool are not
> taking advantage of that atm. There are issues: e.g. How many number of
> request we want to batch? Does this batching hurt latency?

I didn't mean introducing a delay so that multiple requests can be batched.

I was just thinking of the simple case: when there are a lot of
parallel requests the chance increases that a single vring interrupt
provides several I/O requests.  In that case it's easy for the
virtio-blk implementation to issue them all in one io_submit(2) call.
The same is true for io_getevents(2), there might be several completed
host I/O requests.

The reason I mentioned this was because the actual syscall pattern per
request might not require 1 io_submit(2)/io_getevents(2) if you are
processing a lot of requests in parallel.  The only way to know why
kvmtool is slower is by profiling...

Stefan

--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Ronen Hod]

On 07/17/2012 12:21 PM, Asias He wrote:
> On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
>> Il 17/07/2012 10:29, Asias He ha scritto:
>>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>>
>> Are they really 6?  If I/O is coalesced by a factor of 3, for example
>> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
>
> Well. I am counting the number of syscalls in one notify and response process. Sure the IO can be coalesced.

Note that Asias is using very fast "disks" (FusionIO & Ramdisk).
- This might affect the level of coalescing both ways, depending on the scenario and algorithm.
- This also means that the 5%-15% gain will probably be lower in real life.
Ronen.

>
>> Also, is there anything we can improve? Perhaps we can modify epoll and
>> ask it to clear the eventfd for us (would save 2 reads)?  Or
>> io_getevents (would save 1)?
>>
>>> I guess you mean qemu here. Yes, in theory, qemu's block layer can be
>>> improved to achieve similar performance as vhost-blk or kvm tool's
>>> userspace virito-blk has. But I think it makes no sense to prevent one
>>> solution becase there is another in theory solution called: we can do
>>> similar in qemu.
>>
>> It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
>> feature set: no support for block device formats, non-raw protocols,
>> etc.  This makes it different from vhost-net.
>
> Data-plane qemu also has this cripppled feature set problem, no? Does user always choose to use block devices format like qcow2? What if they prefer raw image or raw block device?
>
>>
>> So it begs the question, is it going to be used in production, or just a
>> useful reference tool?
>
> This should be decided by user, I can not speak for them. What is wrong with adding one option for user which they can decide?
>

Re: [PATCH 0/5] Add vhost-blk support

[Ronen Hod]

On 07/17/2012 12:21 PM, Asias He wrote:
> On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
>> Il 17/07/2012 10:29, Asias He ha scritto:
>>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>>
>> Are they really 6?  If I/O is coalesced by a factor of 3, for example
>> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
>
> Well. I am counting the number of syscalls in one notify and response process. Sure the IO can be coalesced.

Note that Asias is using very fast "disks" (FusionIO & Ramdisk).
- This might affect the level of coalescing both ways, depending on the scenario and algorithm.
- This also means that the 5%-15% gain will probably be lower in real life.
Ronen.

>
>> Also, is there anything we can improve? Perhaps we can modify epoll and
>> ask it to clear the eventfd for us (would save 2 reads)?  Or
>> io_getevents (would save 1)?
>>
>>> I guess you mean qemu here. Yes, in theory, qemu's block layer can be
>>> improved to achieve similar performance as vhost-blk or kvm tool's
>>> userspace virito-blk has. But I think it makes no sense to prevent one
>>> solution becase there is another in theory solution called: we can do
>>> similar in qemu.
>>
>> It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
>> feature set: no support for block device formats, non-raw protocols,
>> etc.  This makes it different from vhost-net.
>
> Data-plane qemu also has this cripppled feature set problem, no? Does user always choose to use block devices format like qcow2? What if they prefer raw image or raw block device?
>
>>
>> So it begs the question, is it going to be used in production, or just a
>> useful reference tool?
>
> This should be decided by user, I can not speak for them. What is wrong with adding one option for user which they can decide?
>


--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Ronen Hod]

On 07/17/2012 12:21 PM, Asias He wrote:
> On 07/17/2012 04:52 PM, Paolo Bonzini wrote:
>> Il 17/07/2012 10:29, Asias He ha scritto:
>>> So, vhost-blk at least saves ~6 syscalls for us in each request.
>>
>> Are they really 6?  If I/O is coalesced by a factor of 3, for example
>> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
>
> Well. I am counting the number of syscalls in one notify and response process. Sure the IO can be coalesced.

Note that Asias is using very fast "disks" (FusionIO & Ramdisk).
- This might affect the level of coalescing both ways, depending on the scenario and algorithm.
- This also means that the 5%-15% gain will probably be lower in real life.
Ronen.

>
>> Also, is there anything we can improve? Perhaps we can modify epoll and
>> ask it to clear the eventfd for us (would save 2 reads)?  Or
>> io_getevents (would save 1)?
>>
>>> I guess you mean qemu here. Yes, in theory, qemu's block layer can be
>>> improved to achieve similar performance as vhost-blk or kvm tool's
>>> userspace virito-blk has. But I think it makes no sense to prevent one
>>> solution becase there is another in theory solution called: we can do
>>> similar in qemu.
>>
>> It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
>> feature set: no support for block device formats, non-raw protocols,
>> etc.  This makes it different from vhost-net.
>
> Data-plane qemu also has this cripppled feature set problem, no? Does user always choose to use block devices format like qcow2? What if they prefer raw image or raw block device?
>
>>
>> So it begs the question, is it going to be used in production, or just a
>> useful reference tool?
>
> This should be decided by user, I can not speak for them. What is wrong with adding one option for user which they can decide?
>

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 10:52:10AM +0200, Paolo Bonzini wrote:
> Il 17/07/2012 10:29, Asias He ha scritto:
> > So, vhost-blk at least saves ~6 syscalls for us in each request. 
> 
> Are they really 6?  If I/O is coalesced by a factor of 3, for example
> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
> 
> Also, is there anything we can improve?  Perhaps we can modify epoll and
> ask it to clear the eventfd for us (would save 2 reads)?  Or
> io_getevents (would save 1)?
> 
> > I guess you mean qemu here. Yes, in theory, qemu's block layer can be
> > improved to achieve similar performance as vhost-blk or kvm tool's
> > userspace virito-blk has. But I think it makes no sense to prevent one
> > solution becase there is another in theory solution called: we can do
> > similar in qemu.
> 
> It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
> feature set: no support for block device formats, non-raw protocols,
> etc.  This makes it different from vhost-net.

Well vhost-net is also more limited than virtio-net: no support for
userspace networking, no support for level interrupts,
no support for legacy qemu vlans, can not trace datapath in userspace,
only virtio is supported. None of these is fundamental but this is
how our implementation currently behaves so from user's point of view
that's how it is.  There are also fundamental limitations - e.g.
it's linux only, a special module needs to be loaded and user needs to
get an fd to the char device ...  The way we addressed it, is by making it seamless for
the user: basically if your setup matches what vhost-net can
accelerate, it gets enabled, if not - userspace is used. Most of the
logic is in libvirt.

> So it begs the question, is it going to be used in production, or just a
> useful reference tool?
> 
> Paolo

Sticking to raw already makes virtio-blk faster, doesn't it?
In that vhost-blk looks to me like just another optimization option.
Ideally I think user just should not care where do we handle virtio:
in-kernel or in userspace.  One can imagine it being enabled/disabled
automatically if none of the features unsupported by it are used.

For example currently you specify vhost=on for tap backend and
then if you try to setup an unsupported by it like level interrupts,
it gets disabled and userspace virtio is used.

-- 
MST

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 10:52:10AM +0200, Paolo Bonzini wrote:
> Il 17/07/2012 10:29, Asias He ha scritto:
> > So, vhost-blk at least saves ~6 syscalls for us in each request. 
> 
> Are they really 6?  If I/O is coalesced by a factor of 3, for example
> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
> 
> Also, is there anything we can improve?  Perhaps we can modify epoll and
> ask it to clear the eventfd for us (would save 2 reads)?  Or
> io_getevents (would save 1)?
> 
> > I guess you mean qemu here. Yes, in theory, qemu's block layer can be
> > improved to achieve similar performance as vhost-blk or kvm tool's
> > userspace virito-blk has. But I think it makes no sense to prevent one
> > solution becase there is another in theory solution called: we can do
> > similar in qemu.
> 
> It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
> feature set: no support for block device formats, non-raw protocols,
> etc.  This makes it different from vhost-net.

Well vhost-net is also more limited than virtio-net: no support for
userspace networking, no support for level interrupts,
no support for legacy qemu vlans, can not trace datapath in userspace,
only virtio is supported. None of these is fundamental but this is
how our implementation currently behaves so from user's point of view
that's how it is.  There are also fundamental limitations - e.g.
it's linux only, a special module needs to be loaded and user needs to
get an fd to the char device ...  The way we addressed it, is by making it seamless for
the user: basically if your setup matches what vhost-net can
accelerate, it gets enabled, if not - userspace is used. Most of the
logic is in libvirt.

> So it begs the question, is it going to be used in production, or just a
> useful reference tool?
> 
> Paolo

Sticking to raw already makes virtio-blk faster, doesn't it?
In that vhost-blk looks to me like just another optimization option.
Ideally I think user just should not care where do we handle virtio:
in-kernel or in userspace.  One can imagine it being enabled/disabled
automatically if none of the features unsupported by it are used.

For example currently you specify vhost=on for tap backend and
then if you try to setup an unsupported by it like level interrupts,
it gets disabled and userspace virtio is used.

-- 
MST

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 10:52:10AM +0200, Paolo Bonzini wrote:
> Il 17/07/2012 10:29, Asias He ha scritto:
> > So, vhost-blk at least saves ~6 syscalls for us in each request. 
> 
> Are they really 6?  If I/O is coalesced by a factor of 3, for example
> (i.e. each exit processes 3 requests), it's really 2 syscalls per request.
> 
> Also, is there anything we can improve?  Perhaps we can modify epoll and
> ask it to clear the eventfd for us (would save 2 reads)?  Or
> io_getevents (would save 1)?
> 
> > I guess you mean qemu here. Yes, in theory, qemu's block layer can be
> > improved to achieve similar performance as vhost-blk or kvm tool's
> > userspace virito-blk has. But I think it makes no sense to prevent one
> > solution becase there is another in theory solution called: we can do
> > similar in qemu.
> 
> It depends.  Like vhost-scsi, vhost-blk has the problem of a crippled
> feature set: no support for block device formats, non-raw protocols,
> etc.  This makes it different from vhost-net.

Well vhost-net is also more limited than virtio-net: no support for
userspace networking, no support for level interrupts,
no support for legacy qemu vlans, can not trace datapath in userspace,
only virtio is supported. None of these is fundamental but this is
how our implementation currently behaves so from user's point of view
that's how it is.  There are also fundamental limitations - e.g.
it's linux only, a special module needs to be loaded and user needs to
get an fd to the char device ...  The way we addressed it, is by making it seamless for
the user: basically if your setup matches what vhost-net can
accelerate, it gets enabled, if not - userspace is used. Most of the
logic is in libvirt.

> So it begs the question, is it going to be used in production, or just a
> useful reference tool?
> 
> Paolo

Sticking to raw already makes virtio-blk faster, doesn't it?
In that vhost-blk looks to me like just another optimization option.
Ideally I think user just should not care where do we handle virtio:
in-kernel or in userspace.  One can imagine it being enabled/disabled
automatically if none of the features unsupported by it are used.

For example currently you specify vhost=on for tap backend and
then if you try to setup an unsupported by it like level interrupts,
it gets disabled and userspace virtio is used.

-- 
MST

--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Paolo Bonzini]

Il 17/07/2012 11:45, Michael S. Tsirkin ha scritto:
>> So it begs the question, is it going to be used in production, or just a
>> useful reference tool?
> 
> Sticking to raw already makes virtio-blk faster, doesn't it?
> In that vhost-blk looks to me like just another optimization option.
> Ideally I think user just should not care where do we handle virtio:
> in-kernel or in userspace.  One can imagine it being enabled/disabled
> automatically if none of the features unsupported by it are used.

Ok, that would make more sense.  One difference between vhost-blk and
vhost-net is that for vhost-blk there are also management actions that
would trigger the switch, for example a live snapshot.

So a prerequisite for vhost-blk would be that it is possible to disable
it on the fly while the VM is running, as soon as all in-flight I/O is
completed.

(Note that, however, this is not possible for vhost-scsi, because it
really exposes different hardware to the guest.  It must not happen that
a kernel upgrade or downgrade toggles between userspace SCSI and
vhost-scsi, for example).

>> having to
>> support the API; having to handle transition from one more thing when
>> something better comes out.
> 
> Well this is true for any code. If the limited featureset which
> vhost-blk can accelerate is something many people use, then accelerating
> by 5-15% might outweight support costs.

It is definitely what people use if they are interested in performance.

Paolo

Re: [PATCH 0/5] Add vhost-blk support

[Paolo Bonzini]

Il 17/07/2012 11:45, Michael S. Tsirkin ha scritto:
>> So it begs the question, is it going to be used in production, or just a
>> useful reference tool?
> 
> Sticking to raw already makes virtio-blk faster, doesn't it?
> In that vhost-blk looks to me like just another optimization option.
> Ideally I think user just should not care where do we handle virtio:
> in-kernel or in userspace.  One can imagine it being enabled/disabled
> automatically if none of the features unsupported by it are used.

Ok, that would make more sense.  One difference between vhost-blk and
vhost-net is that for vhost-blk there are also management actions that
would trigger the switch, for example a live snapshot.

So a prerequisite for vhost-blk would be that it is possible to disable
it on the fly while the VM is running, as soon as all in-flight I/O is
completed.

(Note that, however, this is not possible for vhost-scsi, because it
really exposes different hardware to the guest.  It must not happen that
a kernel upgrade or downgrade toggles between userspace SCSI and
vhost-scsi, for example).

>> having to
>> support the API; having to handle transition from one more thing when
>> something better comes out.
> 
> Well this is true for any code. If the limited featureset which
> vhost-blk can accelerate is something many people use, then accelerating
> by 5-15% might outweight support costs.

It is definitely what people use if they are interested in performance.

Paolo

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 12:14:33PM +0200, Paolo Bonzini wrote:
> Il 17/07/2012 11:45, Michael S. Tsirkin ha scritto:
> >> So it begs the question, is it going to be used in production, or just a
> >> useful reference tool?
> > 
> > Sticking to raw already makes virtio-blk faster, doesn't it?
> > In that vhost-blk looks to me like just another optimization option.
> > Ideally I think user just should not care where do we handle virtio:
> > in-kernel or in userspace.  One can imagine it being enabled/disabled
> > automatically if none of the features unsupported by it are used.
> 
> Ok, that would make more sense.  One difference between vhost-blk and
> vhost-net is that for vhost-blk there are also management actions that
> would trigger the switch, for example a live snapshot.
> So a prerequisite for vhost-blk would be that it is possible to disable
> it on the fly while the VM is running, as soon as all in-flight I/O is
> completed.

It applies for vhost-net too. For example if you bring link down,
we switch to userspace. So vhost-net supports this switch on the fly.

> (Note that, however, this is not possible for vhost-scsi,
> because it
> really exposes different hardware to the guest.  It must not happen that
> a kernel upgrade or downgrade toggles between userspace SCSI and
> vhost-scsi, for example).

I would say this is not a prerequisite for merging in qemu.
It might be a required feature for production but it
is also solvable at the management level.

Imagine an "enable-live-snapshots" flag in libvirt, on by default.
Can only be changed while guest is down. If you turn it off,
you get a bit more speed since vhost-blk/vhost-scsi gets enabled.
Also pls note that a backend can support live snapshots.
If it does libvirt thinkably could detect that
and enable vhost-scsi even with enable-live-snapshots on.

> >> having to
> >> support the API; having to handle transition from one more thing when
> >> something better comes out.
> > 
> > Well this is true for any code. If the limited featureset which
> > vhost-blk can accelerate is something many people use, then accelerating
> > by 5-15% might outweight support costs.
> 
> It is definitely what people use if they are interested in performance.
> 
> Paolo

In that case it seems to me we should stop using the featureset as
an argument and focus on whether the extra code is worth the 5-15% gain.
No one seems to have commented on that so everyone on list thinks that
aspect is OK? Any explicit ACKs?

Kernel merge windows is coming up and I would like to see whether
any of vhost-blk / vhost-scsi is going to be actually used by userspace.
I guess we could tag it for staging but would be nice to avoid that.

-- 
MST

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 12:14:33PM +0200, Paolo Bonzini wrote:
> Il 17/07/2012 11:45, Michael S. Tsirkin ha scritto:
> >> So it begs the question, is it going to be used in production, or just a
> >> useful reference tool?
> > 
> > Sticking to raw already makes virtio-blk faster, doesn't it?
> > In that vhost-blk looks to me like just another optimization option.
> > Ideally I think user just should not care where do we handle virtio:
> > in-kernel or in userspace.  One can imagine it being enabled/disabled
> > automatically if none of the features unsupported by it are used.
> 
> Ok, that would make more sense.  One difference between vhost-blk and
> vhost-net is that for vhost-blk there are also management actions that
> would trigger the switch, for example a live snapshot.
> So a prerequisite for vhost-blk would be that it is possible to disable
> it on the fly while the VM is running, as soon as all in-flight I/O is
> completed.

It applies for vhost-net too. For example if you bring link down,
we switch to userspace. So vhost-net supports this switch on the fly.

> (Note that, however, this is not possible for vhost-scsi,
> because it
> really exposes different hardware to the guest.  It must not happen that
> a kernel upgrade or downgrade toggles between userspace SCSI and
> vhost-scsi, for example).

I would say this is not a prerequisite for merging in qemu.
It might be a required feature for production but it
is also solvable at the management level.

Imagine an "enable-live-snapshots" flag in libvirt, on by default.
Can only be changed while guest is down. If you turn it off,
you get a bit more speed since vhost-blk/vhost-scsi gets enabled.
Also pls note that a backend can support live snapshots.
If it does libvirt thinkably could detect that
and enable vhost-scsi even with enable-live-snapshots on.

> >> having to
> >> support the API; having to handle transition from one more thing when
> >> something better comes out.
> > 
> > Well this is true for any code. If the limited featureset which
> > vhost-blk can accelerate is something many people use, then accelerating
> > by 5-15% might outweight support costs.
> 
> It is definitely what people use if they are interested in performance.
> 
> Paolo

In that case it seems to me we should stop using the featureset as
an argument and focus on whether the extra code is worth the 5-15% gain.
No one seems to have commented on that so everyone on list thinks that
aspect is OK? Any explicit ACKs?

Kernel merge windows is coming up and I would like to see whether
any of vhost-blk / vhost-scsi is going to be actually used by userspace.
I guess we could tag it for staging but would be nice to avoid that.

-- 
MST

Re: [PATCH 0/5] Add vhost-blk support

[Paolo Bonzini]

Il 17/07/2012 12:49, Michael S. Tsirkin ha scritto:
>> Ok, that would make more sense.  One difference between vhost-blk and
>> vhost-net is that for vhost-blk there are also management actions that
>> would trigger the switch, for example a live snapshot.
>> So a prerequisite for vhost-blk would be that it is possible to disable
>> it on the fly while the VM is running, as soon as all in-flight I/O is
>> completed.
> 
> It applies for vhost-net too. For example if you bring link down,
> we switch to userspace. So vhost-net supports this switch on the fly.

Cool.

>> (Note that, however, this is not possible for vhost-scsi, because it
>> really exposes different hardware to the guest.  It must not happen that
>> a kernel upgrade or downgrade toggles between userspace SCSI and
>> vhost-scsi, for example).
> 
> I would say this is not a prerequisite for merging in qemu.
> It might be a required feature for production but it
> is also solvable at the management level.

I'm thinking of the level interrupts here.  You cannot make a change in
the guest, and have it do completely unrelated changes the hardware that
the guest sees.

>>>> having to
>>>> support the API; having to handle transition from one more thing when
>>>> something better comes out.
>>>
>>> Well this is true for any code. If the limited featureset which
>>> vhost-blk can accelerate is something many people use, then accelerating
>>> by 5-15% might outweight support costs.
>>
>> It is definitely what people use if they are interested in performance.
> 
> In that case it seems to me we should stop using the feature set as
> an argument and focus on whether the extra code is worth the 5-15% gain.
> No one seems to have commented on that so everyone on list thinks that
> aspect is OK?

I would like to see a breakdown of _where_ the 5-15% lies, something
like http://www.linux-kvm.org/page/Virtio/Block/Latency.

> Kernel merge windows is coming up and I would like to see whether
> any of vhost-blk / vhost-scsi is going to be actually used by userspace.
> I guess we could tag it for staging but would be nice to avoid that.

Staging would be fine by me for both vhost-blk and vhost-scsi.

Paolo

Re: [PATCH 0/5] Add vhost-blk support

[Paolo Bonzini]

Il 17/07/2012 12:49, Michael S. Tsirkin ha scritto:
>> Ok, that would make more sense.  One difference between vhost-blk and
>> vhost-net is that for vhost-blk there are also management actions that
>> would trigger the switch, for example a live snapshot.
>> So a prerequisite for vhost-blk would be that it is possible to disable
>> it on the fly while the VM is running, as soon as all in-flight I/O is
>> completed.
> 
> It applies for vhost-net too. For example if you bring link down,
> we switch to userspace. So vhost-net supports this switch on the fly.

Cool.

>> (Note that, however, this is not possible for vhost-scsi, because it
>> really exposes different hardware to the guest.  It must not happen that
>> a kernel upgrade or downgrade toggles between userspace SCSI and
>> vhost-scsi, for example).
> 
> I would say this is not a prerequisite for merging in qemu.
> It might be a required feature for production but it
> is also solvable at the management level.

I'm thinking of the level interrupts here.  You cannot make a change in
the guest, and have it do completely unrelated changes the hardware that
the guest sees.

>>>> having to
>>>> support the API; having to handle transition from one more thing when
>>>> something better comes out.
>>>
>>> Well this is true for any code. If the limited featureset which
>>> vhost-blk can accelerate is something many people use, then accelerating
>>> by 5-15% might outweight support costs.
>>
>> It is definitely what people use if they are interested in performance.
> 
> In that case it seems to me we should stop using the feature set as
> an argument and focus on whether the extra code is worth the 5-15% gain.
> No one seems to have commented on that so everyone on list thinks that
> aspect is OK?

I would like to see a breakdown of _where_ the 5-15% lies, something
like http://www.linux-kvm.org/page/Virtio/Block/Latency.

> Kernel merge windows is coming up and I would like to see whether
> any of vhost-blk / vhost-scsi is going to be actually used by userspace.
> I guess we could tag it for staging but would be nice to avoid that.

Staging would be fine by me for both vhost-blk and vhost-scsi.

Paolo

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 12:56:31PM +0200, Paolo Bonzini wrote:
> Il 17/07/2012 12:49, Michael S. Tsirkin ha scritto:
> >> Ok, that would make more sense.  One difference between vhost-blk and
> >> vhost-net is that for vhost-blk there are also management actions that
> >> would trigger the switch, for example a live snapshot.
> >> So a prerequisite for vhost-blk would be that it is possible to disable
> >> it on the fly while the VM is running, as soon as all in-flight I/O is
> >> completed.
> > 
> > It applies for vhost-net too. For example if you bring link down,
> > we switch to userspace. So vhost-net supports this switch on the fly.
> 
> Cool.
> 
> >> (Note that, however, this is not possible for vhost-scsi, because it
> >> really exposes different hardware to the guest.  It must not happen that
> >> a kernel upgrade or downgrade toggles between userspace SCSI and
> >> vhost-scsi, for example).
> > 
> > I would say this is not a prerequisite for merging in qemu.
> > It might be a required feature for production but it
> > is also solvable at the management level.
> 
> I'm thinking of the level interrupts here.  You cannot make a change in
> the guest, and have it do completely unrelated changes the hardware that
> the guest sees.

Absolutely.

So the right thing for vhost-scsi might be to just support level
(equivalent for "force" flag in vhost-net).
We don't in vhost-net because it is triggered by some old guests
but all virtio-scsi guests use MSI so level is just a spec compatibility
issue.

We might also gain kernel support for level at some point.

> >>>> having to
> >>>> support the API; having to handle transition from one more thing when
> >>>> something better comes out.
> >>>
> >>> Well this is true for any code. If the limited featureset which
> >>> vhost-blk can accelerate is something many people use, then accelerating
> >>> by 5-15% might outweight support costs.
> >>
> >> It is definitely what people use if they are interested in performance.
> > 
> > In that case it seems to me we should stop using the feature set as
> > an argument and focus on whether the extra code is worth the 5-15% gain.
> > No one seems to have commented on that so everyone on list thinks that
> > aspect is OK?
> 
> I would like to see a breakdown of _where_ the 5-15% lies, something
> like http://www.linux-kvm.org/page/Virtio/Block/Latency.

Yes but I think it's also nice to have. It's hard to argue IMO that
virtio as kernel interface cuts out some overhead.

> > Kernel merge windows is coming up and I would like to see whether
> > any of vhost-blk / vhost-scsi is going to be actually used by userspace.
> > I guess we could tag it for staging but would be nice to avoid that.
> 
> Staging would be fine by me for both vhost-blk and vhost-scsi.
> 
> Paolo

The reason I say staging is because there seems to be a deadlock
where userspace waits for kernel to merge a driver and
kernel does not want to commit to an ABI that will then
go unused.

So even if it gets tagged as staging it would only
make sense for it to stay there for one cycle. And then either
get removed if no userspace materializes or lose staging tag
if it does.

-- 
MST

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 12:56:31PM +0200, Paolo Bonzini wrote:
> Il 17/07/2012 12:49, Michael S. Tsirkin ha scritto:
> >> Ok, that would make more sense.  One difference between vhost-blk and
> >> vhost-net is that for vhost-blk there are also management actions that
> >> would trigger the switch, for example a live snapshot.
> >> So a prerequisite for vhost-blk would be that it is possible to disable
> >> it on the fly while the VM is running, as soon as all in-flight I/O is
> >> completed.
> > 
> > It applies for vhost-net too. For example if you bring link down,
> > we switch to userspace. So vhost-net supports this switch on the fly.
> 
> Cool.
> 
> >> (Note that, however, this is not possible for vhost-scsi, because it
> >> really exposes different hardware to the guest.  It must not happen that
> >> a kernel upgrade or downgrade toggles between userspace SCSI and
> >> vhost-scsi, for example).
> > 
> > I would say this is not a prerequisite for merging in qemu.
> > It might be a required feature for production but it
> > is also solvable at the management level.
> 
> I'm thinking of the level interrupts here.  You cannot make a change in
> the guest, and have it do completely unrelated changes the hardware that
> the guest sees.

Absolutely.

So the right thing for vhost-scsi might be to just support level
(equivalent for "force" flag in vhost-net).
We don't in vhost-net because it is triggered by some old guests
but all virtio-scsi guests use MSI so level is just a spec compatibility
issue.

We might also gain kernel support for level at some point.

> >>>> having to
> >>>> support the API; having to handle transition from one more thing when
> >>>> something better comes out.
> >>>
> >>> Well this is true for any code. If the limited featureset which
> >>> vhost-blk can accelerate is something many people use, then accelerating
> >>> by 5-15% might outweight support costs.
> >>
> >> It is definitely what people use if they are interested in performance.
> > 
> > In that case it seems to me we should stop using the feature set as
> > an argument and focus on whether the extra code is worth the 5-15% gain.
> > No one seems to have commented on that so everyone on list thinks that
> > aspect is OK?
> 
> I would like to see a breakdown of _where_ the 5-15% lies, something
> like http://www.linux-kvm.org/page/Virtio/Block/Latency.

Yes but I think it's also nice to have. It's hard to argue IMO that
virtio as kernel interface cuts out some overhead.

> > Kernel merge windows is coming up and I would like to see whether
> > any of vhost-blk / vhost-scsi is going to be actually used by userspace.
> > I guess we could tag it for staging but would be nice to avoid that.
> 
> Staging would be fine by me for both vhost-blk and vhost-scsi.
> 
> Paolo

The reason I say staging is because there seems to be a deadlock
where userspace waits for kernel to merge a driver and
kernel does not want to commit to an ABI that will then
go unused.

So even if it gets tagged as staging it would only
make sense for it to stay there for one cycle. And then either
get removed if no userspace materializes or lose staging tag
if it does.

-- 
MST

Re: [PATCH 0/5] Add vhost-blk support

[Michael S. Tsirkin]

On Tue, Jul 17, 2012 at 12:56:31PM +0200, Paolo Bonzini wrote:
> Il 17/07/2012 12:49, Michael S. Tsirkin ha scritto:
> >> Ok, that would make more sense.  One difference between vhost-blk and
> >> vhost-net is that for vhost-blk there are also management actions that
> >> would trigger the switch, for example a live snapshot.
> >> So a prerequisite for vhost-blk would be that it is possible to disable
> >> it on the fly while the VM is running, as soon as all in-flight I/O is
> >> completed.
> > 
> > It applies for vhost-net too. For example if you bring link down,
> > we switch to userspace. So vhost-net supports this switch on the fly.
> 
> Cool.
> 
> >> (Note that, however, this is not possible for vhost-scsi, because it
> >> really exposes different hardware to the guest.  It must not happen that
> >> a kernel upgrade or downgrade toggles between userspace SCSI and
> >> vhost-scsi, for example).
> > 
> > I would say this is not a prerequisite for merging in qemu.
> > It might be a required feature for production but it
> > is also solvable at the management level.
> 
> I'm thinking of the level interrupts here.  You cannot make a change in
> the guest, and have it do completely unrelated changes the hardware that
> the guest sees.

Absolutely.

So the right thing for vhost-scsi might be to just support level
(equivalent for "force" flag in vhost-net).
We don't in vhost-net because it is triggered by some old guests
but all virtio-scsi guests use MSI so level is just a spec compatibility
issue.

We might also gain kernel support for level at some point.

> >>>> having to
> >>>> support the API; having to handle transition from one more thing when
> >>>> something better comes out.
> >>>
> >>> Well this is true for any code. If the limited featureset which
> >>> vhost-blk can accelerate is something many people use, then accelerating
> >>> by 5-15% might outweight support costs.
> >>
> >> It is definitely what people use if they are interested in performance.
> > 
> > In that case it seems to me we should stop using the feature set as
> > an argument and focus on whether the extra code is worth the 5-15% gain.
> > No one seems to have commented on that so everyone on list thinks that
> > aspect is OK?
> 
> I would like to see a breakdown of _where_ the 5-15% lies, something
> like http://www.linux-kvm.org/page/Virtio/Block/Latency.

Yes but I think it's also nice to have. It's hard to argue IMO that
virtio as kernel interface cuts out some overhead.

> > Kernel merge windows is coming up and I would like to see whether
> > any of vhost-blk / vhost-scsi is going to be actually used by userspace.
> > I guess we could tag it for staging but would be nice to avoid that.
> 
> Staging would be fine by me for both vhost-blk and vhost-scsi.
> 
> Paolo

The reason I say staging is because there seems to be a deadlock
where userspace waits for kernel to merge a driver and
kernel does not want to commit to an ABI that will then
go unused.

So even if it gets tagged as staging it would only
make sense for it to stay there for one cycle. And then either
get removed if no userspace materializes or lose staging tag
if it does.

-- 
MST

--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Tue, Jul 17, 2012 at 9:29 AM, Asias He <asias@redhat.com> wrote:
> On 07/16/2012 07:58 PM, Stefan Hajnoczi wrote:
>> Does the vhost-blk implementation do anything fundamentally different
>> from userspace?  Where is the overhead that userspace virtio-blk has?
>
>
>
> Currently, no. But we could play with bio directly in vhost-blk as Christoph
> suggested which could make the IO path from guest to host's real storage
> even shorter in vhost-blk.

Wait :).  My point is that writing new code without systematically
investigating performance means that we're essentially throwing random
things and seeing what sticks.

Adding bio mode would make vhost-blk and kvmtool more different.
It'll probably make vhost-blk slightly faster but harder to compare
against kvmtool.  It's easier to start profiling before making that
change.

The reason I said "special-purpose kernel module" is because kvmtool
could be suffering from a bottleneck that can be fixed.  Other
userspace applications would also benefit from that fix - it would be
generally useful.  Adding a vhost-blk kernel module works around this
but only benefits KVM specifically.

Stefan

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Tue, Jul 17, 2012 at 9:29 AM, Asias He <asias@redhat.com> wrote:
> On 07/16/2012 07:58 PM, Stefan Hajnoczi wrote:
>> Does the vhost-blk implementation do anything fundamentally different
>> from userspace?  Where is the overhead that userspace virtio-blk has?
>
>
>
> Currently, no. But we could play with bio directly in vhost-blk as Christoph
> suggested which could make the IO path from guest to host's real storage
> even shorter in vhost-blk.

Wait :).  My point is that writing new code without systematically
investigating performance means that we're essentially throwing random
things and seeing what sticks.

Adding bio mode would make vhost-blk and kvmtool more different.
It'll probably make vhost-blk slightly faster but harder to compare
against kvmtool.  It's easier to start profiling before making that
change.

The reason I said "special-purpose kernel module" is because kvmtool
could be suffering from a bottleneck that can be fixed.  Other
userspace applications would also benefit from that fix - it would be
generally useful.  Adding a vhost-blk kernel module works around this
but only benefits KVM specifically.

Stefan

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Tue, Jul 17, 2012 at 9:29 AM, Asias He <asias@redhat.com> wrote:
> On 07/16/2012 07:58 PM, Stefan Hajnoczi wrote:
>> Does the vhost-blk implementation do anything fundamentally different
>> from userspace?  Where is the overhead that userspace virtio-blk has?
>
>
>
> Currently, no. But we could play with bio directly in vhost-blk as Christoph
> suggested which could make the IO path from guest to host's real storage
> even shorter in vhost-blk.

Wait :).  My point is that writing new code without systematically
investigating performance means that we're essentially throwing random
things and seeing what sticks.

Adding bio mode would make vhost-blk and kvmtool more different.
It'll probably make vhost-blk slightly faster but harder to compare
against kvmtool.  It's easier to start profiling before making that
change.

The reason I said "special-purpose kernel module" is because kvmtool
could be suffering from a bottleneck that can be fixed.  Other
userspace applications would also benefit from that fix - it would be
generally useful.  Adding a vhost-blk kernel module works around this
but only benefits KVM specifically.

Stefan

--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org.  For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

Re: [PATCH 0/5] Add vhost-blk support

[Stefan Hajnoczi]

On Thu, Jul 12, 2012 at 4:35 PM, Asias He <asias@redhat.com> wrote:
> This patchset adds vhost-blk support. vhost-blk is a in kernel virito-blk
> device accelerator. Compared to userspace virtio-blk implementation, vhost-blk
> gives about 5% to 15% performance improvement.

Why is it 5-15% faster?  vhost-blk and the userspace virtio-blk you
benchmarked should be doing basically the same thing:

1. An eventfd file descriptor is signalled when the vring has new
requests available from the guest.
2. A thread wakes up and processes the virtqueue.
3. Linux AIO is used to issue host I/O.
4. An interrupt is injected into the guest.

Does the vhost-blk implementation do anything fundamentally different
from userspace?  Where is the overhead that userspace virtio-blk has?

I'm asking because it would be beneficial to fix the overhead
(especially it that could speed up all userspace applications) instead
of adding a special-purpose kernel module to work around the overhead.

Stefan