* kobject (null) without dirent 3.x domU
@ 2012-07-12 20:08 William Dauchy
2012-07-31 23:08 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 3+ messages in thread
From: William Dauchy @ 2012-07-12 20:08 UTC (permalink / raw)
To: xen-devel
Hi,
On a 3.3.8 dom0 x86_32, I'm sometimes getting a "sysfs: kobject (null)
without dirent" with a 3.4.4 x86_64 domU kernel during boot.
The hypervisor is a Xen4.1.2
I also tested it on a 3.2 and 3.3 domU kernel and got the same results.
Sounds like a race since I can't reproduce it every time.
Does anybody have any clue?
sysfs: kobject (null) without dirent
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8105aa59>] __wake_up_common+0x29/0x80
PGD 0
Oops: 0000 [#1] SMP
CPU 2
Modules linked in:
Pid: 46, comm: xenwatch Tainted: G W 3.4.4-xenU-6816-x86_64 #2
RIP: e030:[<ffffffff8105aa59>] [<ffffffff8105aa59>] __wake_up_common+0x29/0x80
RSP: e02b:ffff88000c6f9d80 EFLAGS: 00010082
RAX: ffffffffffffffe8 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffff88000fc6c3c0
RBP: 0000000000000200 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000004 R12: ffff88000fc6c3b8
R13: ffff88000fc6c3c8 R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff88000fc40000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 000000000160b000 CR4: 0000000000002660
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process xenwatch (pid: 46, threadinfo ffff88000c6f8000, task ffff88000c6eb0c0)
Stack:
ffff88000c6f9e08 0000000081036335 0000000000000200 ffff88000fc6c3c0
0000000000000200 ffff88000fc6c3b8 ffffffff817148e2 ffff88000c6f9e98
ffff88000c6eb0c0 ffffffff8105b4d0 ffff88000fc6c308 0000000000000000
Call Trace:
[<ffffffff8105b4d0>] ? complete_all+0x40/0x60
[<ffffffff81264fe0>] ? device_pm_remove+0x10/0x70
[<ffffffff8125a776>] ? device_del+0x36/0x1c0
[<ffffffff8125a909>] ? device_unregister+0x9/0x20
[<ffffffff8125f750>] ? unregister_cpu+0x30/0x60
[<ffffffff81239047>] ? handle_vcpu_hotplug_event+0xc7/0xd0
[<ffffffff81235942>] ? xenwatch_thread+0xb2/0x180
[<ffffffff8105aa80>] ? __wake_up_common+0x50/0x80
[<ffffffff81052ed0>] ? wake_up_bit+0x40/0x40
[<ffffffff81235890>] ? xenbus_thread+0x2f0/0x2f0
[<ffffffff81235890>] ? xenbus_thread+0x2f0/0x2f0
[<ffffffff81052a0e>] ? kthread+0x9e/0xb0
[<ffffffff8134b864>] ? kernel_thread_helper+0x4/0x10
[<ffffffff81349e78>] ? retint_restore_args+0x5/0x6
[<ffffffff8134b860>] ? gs_change+0x13/0x13
Code: 00 00 41 57 41 89 f7 41 56 4d 89 c6 41 55 4c 8d 6f 08 41 54 55
53 89 cb 48 83 ec 18 89 54 24 0c 48 8b 57 08 48 8d 42 e8 49 39 d5 <48>
8b 68 18 74 40 48 83 ed 18 eb 0a 0f 1f 00 48 89 e8 48 8d 6a
RIP [<ffffffff8105aa59>] __wake_up_common+0x29/0x80
RSP <ffff88000c6f9d80>
CR2: 0000000000000000
---[ end trace 4eaa2a86a8e2da23 ]---
SMP alternatives: switching to UP code
Regards,
--
William
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: kobject (null) without dirent 3.x domU
2012-07-12 20:08 kobject (null) without dirent 3.x domU William Dauchy
@ 2012-07-31 23:08 ` Konrad Rzeszutek Wilk
2012-08-01 9:14 ` William Dauchy
0 siblings, 1 reply; 3+ messages in thread
From: Konrad Rzeszutek Wilk @ 2012-07-31 23:08 UTC (permalink / raw)
To: William Dauchy; +Cc: xen-devel
On Thu, Jul 12, 2012 at 10:08:59PM +0200, William Dauchy wrote:
> Hi,
>
> On a 3.3.8 dom0 x86_32, I'm sometimes getting a "sysfs: kobject (null)
> without dirent" with a 3.4.4 x86_64 domU kernel during boot.
> The hypervisor is a Xen4.1.2
> I also tested it on a 3.2 and 3.3 domU kernel and got the same results.
> Sounds like a race since I can't reproduce it every time.
> Does anybody have any clue?
Do you see this with v3.5?
>
> sysfs: kobject (null) without dirent
> BUG: unable to handle kernel NULL pointer dereference at (null)
> IP: [<ffffffff8105aa59>] __wake_up_common+0x29/0x80
> PGD 0
> Oops: 0000 [#1] SMP
> CPU 2
> Modules linked in:
>
> Pid: 46, comm: xenwatch Tainted: G W 3.4.4-xenU-6816-x86_64 #2
> RIP: e030:[<ffffffff8105aa59>] [<ffffffff8105aa59>] __wake_up_common+0x29/0x80
> RSP: e02b:ffff88000c6f9d80 EFLAGS: 00010082
> RAX: ffffffffffffffe8 RBX: 0000000000000000 RCX: 0000000000000000
> RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffff88000fc6c3c0
> RBP: 0000000000000200 R08: 0000000000000000 R09: 0000000000000000
> R10: 0000000000000000 R11: 0000000000000004 R12: ffff88000fc6c3b8
> R13: ffff88000fc6c3c8 R14: 0000000000000000 R15: 0000000000000003
> FS: 0000000000000000(0000) GS:ffff88000fc40000(0000) knlGS:0000000000000000
> CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 0000000000000000 CR3: 000000000160b000 CR4: 0000000000002660
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process xenwatch (pid: 46, threadinfo ffff88000c6f8000, task ffff88000c6eb0c0)
> Stack:
> ffff88000c6f9e08 0000000081036335 0000000000000200 ffff88000fc6c3c0
> 0000000000000200 ffff88000fc6c3b8 ffffffff817148e2 ffff88000c6f9e98
> ffff88000c6eb0c0 ffffffff8105b4d0 ffff88000fc6c308 0000000000000000
> Call Trace:
> [<ffffffff8105b4d0>] ? complete_all+0x40/0x60
> [<ffffffff81264fe0>] ? device_pm_remove+0x10/0x70
> [<ffffffff8125a776>] ? device_del+0x36/0x1c0
> [<ffffffff8125a909>] ? device_unregister+0x9/0x20
> [<ffffffff8125f750>] ? unregister_cpu+0x30/0x60
> [<ffffffff81239047>] ? handle_vcpu_hotplug_event+0xc7/0xd0
> [<ffffffff81235942>] ? xenwatch_thread+0xb2/0x180
> [<ffffffff8105aa80>] ? __wake_up_common+0x50/0x80
> [<ffffffff81052ed0>] ? wake_up_bit+0x40/0x40
> [<ffffffff81235890>] ? xenbus_thread+0x2f0/0x2f0
> [<ffffffff81235890>] ? xenbus_thread+0x2f0/0x2f0
> [<ffffffff81052a0e>] ? kthread+0x9e/0xb0
> [<ffffffff8134b864>] ? kernel_thread_helper+0x4/0x10
> [<ffffffff81349e78>] ? retint_restore_args+0x5/0x6
> [<ffffffff8134b860>] ? gs_change+0x13/0x13
> Code: 00 00 41 57 41 89 f7 41 56 4d 89 c6 41 55 4c 8d 6f 08 41 54 55
> 53 89 cb 48 83 ec 18 89 54 24 0c 48 8b 57 08 48 8d 42 e8 49 39 d5 <48>
> 8b 68 18 74 40 48 83 ed 18 eb 0a 0f 1f 00 48 89 e8 48 8d 6a
> RIP [<ffffffff8105aa59>] __wake_up_common+0x29/0x80
> RSP <ffff88000c6f9d80>
> CR2: 0000000000000000
> ---[ end trace 4eaa2a86a8e2da23 ]---
> SMP alternatives: switching to UP code
>
> Regards,
> --
> William
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: kobject (null) without dirent 3.x domU
2012-07-31 23:08 ` Konrad Rzeszutek Wilk
@ 2012-08-01 9:14 ` William Dauchy
0 siblings, 0 replies; 3+ messages in thread
From: William Dauchy @ 2012-08-01 9:14 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
On Wed, Aug 1, 2012 at 1:08 AM, Konrad Rzeszutek Wilk
<konrad.wilk@oracle.com> wrote:
> Do you see this with v3.5?
Thanks for your answer.
Sorry, in fact I found the issue. It was a race in my api script
between hotplug cpu and the start of the vm.
Regards,
--
William
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-08-01 9:14 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-07-12 20:08 kobject (null) without dirent 3.x domU William Dauchy
2012-07-31 23:08 ` Konrad Rzeszutek Wilk
2012-08-01 9:14 ` William Dauchy
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.