Re: [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg

Re: [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg

[Felipe Balbi]

[-- Attachment #1.1: Type: text/plain, Size: 14605 bytes --]

Hi,

On Fri, Aug 10, 2012 at 12:40:27PM +0530, Praveen Paneri wrote:
> This driver uses usb_phy interface to interact with s3c-hsotg. Supports
> phy_init and phy_shutdown functions to enable/disable phy. Tested with
> smdk6410 and smdkv310. More SoCs can be brought under later.
> 
> Signed-off-by: Praveen Paneri <p.paneri-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Acked-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>

this looks good. Just 2 comments below.

> ---
>  .../devicetree/bindings/usb/samsung-usbphy.txt     |    9 +
>  drivers/usb/phy/Kconfig                            |    8 +
>  drivers/usb/phy/Makefile                           |    1 +
>  drivers/usb/phy/samsung-usbphy.c                   |  345 ++++++++++++++++++++
>  drivers/usb/phy/samsung-usbphy.h                   |   48 +++
>  include/linux/platform_data/samsung-usbphy.h       |   27 ++
>  6 files changed, 438 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>  create mode 100644 drivers/usb/phy/samsung-usbphy.c
>  create mode 100644 drivers/usb/phy/samsung-usbphy.h
>  create mode 100644 include/linux/platform_data/samsung-usbphy.h
> 
> diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> new file mode 100644
> index 0000000..fefd9c8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> @@ -0,0 +1,9 @@
> +* Samsung's usb phy transceiver
> +
> +The Samsung's phy transceiver is used for controlling usb otg phy for
> +s3c-hsotg usb device controller.
> +
> +Required properties:
> +- compatible : should be "samsung,exynos4210-usbphy"
> +- reg : base physical address of the phy registers and length of memory mapped
> +	region.
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index e7cf84f..d916477 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -15,3 +15,11 @@ config USB_ISP1301
>  
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called isp1301.
> +
> +config SAMSUNG_USBPHY
> +       bool "Samsung USB PHY controller Driver"
> +       depends on USB_S3C_HSOTG
> +       select USB_OTG_UTILS
> +       help
> +         Enable this to support Samsung USB phy controller for samsung
> +         SoCs.
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index eca095b..dfca70d 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -5,3 +5,4 @@
>  ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>  
>  obj-$(CONFIG_USB_ISP1301)		+= isp1301.o
> +obj-$(CONFIG_SAMSUNG_USBPHY)		+= samsung-usbphy.o
> diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
> new file mode 100644
> index 0000000..739b6c9
> --- /dev/null
> +++ b/drivers/usb/phy/samsung-usbphy.c
> @@ -0,0 +1,345 @@
> +/* linux/drivers/usb/phy/samsung-usbphy.c
> + *
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + *              http://www.samsung.com
> + *
> + * Author: Praveen Paneri <p.paneri-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> + *
> + * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> +*/
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/usb/otg.h>
> +#include <linux/platform_data/samsung-usbphy.h>
> +
> +#include "samsung-usbphy.h"
> +
> +enum samsung_cpu_type {
> +	TYPE_S3C64XX,
> +	TYPE_EXYNOS4210,
> +};
> +
> +/*
> + * struct samsung_usbphy - transceiver driver state
> + * @phy: transceiver structure
> + * @plat: platform data
> + * @dev: The parent device supplied to the probe function
> + * @clk: usb phy clock
> + * @regs: usb phy register memory base
> + * @cpu_type: machine identifier
> + */
> +struct samsung_usbphy {
> +	struct usb_phy	phy;
> +	struct samsung_usbphy_data *plat;
> +	struct device	*dev;
> +	struct clk	*clk;
> +	void __iomem	*regs;
> +	int		cpu_type;
> +};
> +
> +#define phy_to_sphy(x)		container_of((x), struct samsung_usbphy, phy)
> +
> +/*
> + * Enables or disables the phy clock
> + * returns 0 on success else the error
> + */
> +static int samsung_usbphy_clk_control(struct samsung_usbphy *sphy, bool on)
> +{
> +	if (on) {
> +		if (!sphy->clk) {
> +			sphy->clk = clk_get(sphy->dev, "otg");
> +			if (IS_ERR(sphy->clk)) {
> +				dev_err(sphy->dev, "Failed to get otg clock\n");
> +				return PTR_ERR(sphy->clk);
> +			}
> +		}
> +		clk_enable(sphy->clk);
> +	} else {
> +		clk_disable(sphy->clk);
> +		clk_put(sphy->clk);
> +	}
> +
> +	return 0;
> +}
> +
> +/*
> + * Returns reference clock frequency
> + */
> +static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
> +{
> +	struct clk *ref_clk;
> +	int refclk_freq = 0;
> +
> +	ref_clk = clk_get(sphy->dev, "xusbxti");
> +	if (IS_ERR(ref_clk)) {
> +		dev_err(sphy->dev, "Failed to get reference clock\n");
> +		return PTR_ERR(ref_clk);
> +	}
> +
> +	switch (clk_get_rate(ref_clk)) {
> +	case 12 * MHZ:
> +		refclk_freq |= S3C_PHYCLK_CLKSEL_12M;
> +		break;
> +	case 24 * MHZ:
> +		refclk_freq |= S3C_PHYCLK_CLKSEL_24M;
> +		break;
> +	default:
> +	case 48 * MHZ:
> +		/* default reference clock */
> +		refclk_freq |= S3C_PHYCLK_CLKSEL_48M;
> +		break;
> +	}
> +	clk_put(ref_clk);
> +
> +	return refclk_freq;
> +}
> +
> +static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
> +{
> +	void __iomem *regs = sphy->regs;
> +	u32 phypwr;
> +	u32 phyclk;
> +	u32 rstcon;
> +
> +	/* set clock frequency for PLL */
> +	phyclk = samsung_usbphy_get_refclk_freq(sphy);
> +	phypwr = readl(regs + S3C_PHYPWR);
> +	rstcon = readl(regs + S3C_RSTCON);
> +
> +	switch (sphy->cpu_type) {
> +	case TYPE_S3C64XX:
> +		phyclk &= ~(S3C_PHYCLK_COMMON_ON_N);
> +		phypwr &= ~S3C_PHYPWR_NORMAL_MASK;
> +		rstcon |= S3C_RSTCON_PHY;
> +		break;
> +	case TYPE_EXYNOS4210:
> +		phypwr &= ~EXYNOS4_PHYPWR_NORMAL_MASK;
> +		rstcon |= S3C_RSTCON_PHY;
> +	default:
> +		break;
> +	}
> +
> +	writel(phyclk, regs + S3C_PHYCLK);
> +	/* set to normal of PHY0 */
> +	writel(phypwr, regs + S3C_PHYPWR);
> +	/* reset all ports of PHY and Link */
> +	writel(rstcon, regs + S3C_RSTCON);
> +	udelay(10);
> +	rstcon &= ~S3C_RSTCON_PHY;
> +	writel(rstcon, regs + S3C_RSTCON);
> +}
> +
> +static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
> +{
> +	void __iomem *regs = sphy->regs;
> +	u32 phypwr;
> +
> +	phypwr = readl(regs + S3C_PHYPWR);
> +
> +	switch (sphy->cpu_type) {
> +	case TYPE_S3C64XX:
> +		phypwr |= S3C_PHYPWR_NORMAL_MASK;
> +		break;
> +	case TYPE_EXYNOS4210:
> +		phypwr |= EXYNOS4_PHYPWR_NORMAL_MASK;
> +	default:
> +		break;
> +	}
> +
> +	/* unset to normal of PHY0 */
> +	writel(phypwr, regs + S3C_PHYPWR);
> +}
> +
> +/*
> + * The function passed to the usb driver for phy initialization
> + */
> +static int samsung_usbphy_init(struct usb_phy *phy)
> +{
> +	struct samsung_usbphy *sphy;
> +	int ret = 0;
> +
> +	sphy = phy_to_sphy(phy);
> +
> +	/* Enable the phy clock */
> +	ret = samsung_usbphy_clk_control(sphy, true);
> +	if (ret) {
> +		dev_err(sphy->dev, "phy clock enable failed\n");
> +		return ret;
> +	}
> +
> +	/* Disable phy isolation */
> +	if (sphy->plat && sphy->plat->pmu_isolation)
> +		sphy->plat->pmu_isolation(false);
> +
> +	/* Initialize usb phy registers */
> +	samsung_usbphy_enable(sphy);
> +	return ret;
> +}
> +
> +/*
> + * The function passed to the usb driver for phy shutdown
> + */
> +static void samsung_usbphy_shutdown(struct usb_phy *phy)
> +{
> +	struct samsung_usbphy *sphy;
> +
> +	sphy = phy_to_sphy(phy);
> +
> +	/* De-initialize usb phy registers */
> +	samsung_usbphy_disable(sphy);
> +
> +	/* Enable phy isolation */
> +	if (sphy->plat && sphy->plat->pmu_isolation)
> +		sphy->plat->pmu_isolation(true);
> +
> +	/* Disable the phy clock */
> +	samsung_usbphy_clk_control(sphy, false);
> +}
> +
> +static const struct of_device_id samsung_usbphy_dt_match[];
> +
> +static inline int samsung_usbphy_get_driver_data(struct platform_device *pdev)
> +{
> +#ifdef CONFIG_OF
> +	int data;
> +	if (pdev->dev.of_node) {
> +		const struct of_device_id *match;
> +		match = of_match_node(samsung_usbphy_dt_match,
> +							pdev->dev.of_node);
> +		data = (int) match->data;
> +		return data;
> +	}
> +#endif
> +	return platform_get_device_id(pdev)->driver_data;
> +}
> +
> +static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
> +{
> +	struct samsung_usbphy *sphy;
> +	struct samsung_usbphy_data *pdata;
> +	struct device *dev = &pdev->dev;
> +	struct resource *phy_mem;
> +	void __iomem	*phy_base;
> +	int	ret;
> +
> +	pdata = pdev->dev.platform_data;
> +	if (!pdata) {
> +		dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
> +		return -EINVAL;
> +	}
> +
> +	phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!phy_mem) {
> +		dev_err(dev, "%s: missing mem resource\n", __func__);
> +		return -ENODEV;
> +	}
> +
> +	phy_base = devm_request_and_ioremap(dev, phy_mem);
> +	if (!phy_base) {
> +		dev_err(dev, "%s: register mapping failed\n", __func__);
> +		return -ENXIO;
> +	}
> +
> +	sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
> +	if (!sphy)
> +		return -ENOMEM;
> +
> +	sphy->dev		= &pdev->dev;
> +	sphy->plat		= pdata;
> +	sphy->regs		= phy_base;
> +	sphy->phy.dev		= sphy->dev;
> +	sphy->phy.label		= "samsung-usbphy";
> +	sphy->phy.init		= samsung_usbphy_init;
> +	sphy->phy.shutdown	= samsung_usbphy_shutdown;
> +	sphy->cpu_type		= samsung_usbphy_get_driver_data(pdev);
> +
> +	ret = usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
> +	if (ret)
> +		goto err;
> +
> +	platform_set_drvdata(pdev, sphy);
> +
> +	dev_info(&pdev->dev, "Initialized samsung USB OTG PHY module\n");

please avoid dev_info() at the end of probe. It just makes booting
noisier.

> +err:
> +	return ret;
> +}
> +
> +static int __exit samsung_usbphy_remove(struct platform_device *pdev)
> +{
> +	struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
> +
> +	usb_remove_phy(&sphy->phy);
> +
> +	if (sphy->clk) {
> +		clk_put(sphy->clk);
> +		sphy->clk = NULL;
> +	}
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id samsung_usbphy_dt_match[] = {
> +	{
> +		.compatible = "samsung,s3c64xx-usbphy",
> +		.data = (void *)TYPE_S3C64XX,
> +	}, {
> +		.compatible = "samsung,exynos4210-usbphy",
> +		.data = (void *)TYPE_EXYNOS4210,
> +	},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
> +#else
> +#define samsung_usbphy_dt_match NULL
> +#endif
> +
> +static struct platform_device_id samsung_usbphy_driver_ids[] = {
> +	{
> +		.name		= "s3c64xx-usbphy",
> +		.driver_data	= TYPE_S3C64XX,
> +	}, {
> +		.name		= "exynos4210-usbphy",
> +		.driver_data	= TYPE_EXYNOS4210,
> +	},
> +	{},
> +};
> +
> +MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
> +
> +static struct platform_driver samsung_usbphy_driver = {
> +	.probe		= samsung_usbphy_probe,
> +	.remove		= __devexit_p(samsung_usbphy_remove),
> +	.id_table	= samsung_usbphy_driver_ids,
> +	.driver		= {
> +		.name	= "samsung-usbphy",
> +		.owner	= THIS_MODULE,
> +		.of_match_table = samsung_usbphy_dt_match,
> +	},
> +};
> +
> +module_platform_driver(samsung_usbphy_driver);
> +
> +MODULE_DESCRIPTION("Samsung USB phy controller");
> +MODULE_AUTHOR("Praveen Paneri <p.paneri-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:samsung-usbphy");
> diff --git a/drivers/usb/phy/samsung-usbphy.h b/drivers/usb/phy/samsung-usbphy.h
> new file mode 100644
> index 0000000..093b1dc
> --- /dev/null
> +++ b/drivers/usb/phy/samsung-usbphy.h
> @@ -0,0 +1,48 @@
> +/*
> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> + * Author: Yulgon Kim <yulgon.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> + * Author: Joonyoung Shim <jy0922.shim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> + * Author: Praveen Paneri <p.paneri-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __SAMSUNG_USBPHY_H
> +#define __SAMSUNG_USBPHY_H
> +
> +#define S3C_PHYPWR				(0x00)
> +
> +#define S3C_PHYPWR_NORMAL_MASK			(0x19 << 0)
> +#define S3C_PHYPWR_OTG_DISABLE			(1 << 4)
> +#define S3C_PHYPWR_ANALOG_POWERDOWN		(1 << 3)
> +#define S3C_PHYPWR_FORCE_SUSPEND		(1 << 1)
> +/* For Exynos4 */
> +#define EXYNOS4_PHYPWR_NORMAL_MASK		(0x39 << 0)
> +#define EXYNOS4_PHYPWR_SLEEP			(1 << 5)
> +
> +#define S3C_PHYCLK				(0x04)
> +
> +#define S3C_PHYCLK_MODE_SERIAL			(1 << 6)
> +#define S3C_PHYCLK_EXT_OSC			(1 << 5)
> +#define S3C_PHYCLK_COMMON_ON_N			(1 << 4)
> +#define S3C_PHYCLK_ID_PULL			(1 << 2)
> +#define S3C_PHYCLK_CLKSEL_MASK			(0x3 << 0)
> +#define S3C_PHYCLK_CLKSEL_SHIFT			(0)
> +#define S3C_PHYCLK_CLKSEL_48M			(0x0 << 0)
> +#define S3C_PHYCLK_CLKSEL_12M			(0x2 << 0)
> +#define S3C_PHYCLK_CLKSEL_24M			(0x3 << 0)
> +
> +#define S3C_RSTCON				(0x08)
> +
> +#define S3C_RSTCON_PHYCLK			(1 << 2)
> +#define S3C_RSTCON_HCLK				(1 << 1)
> +#define S3C_RSTCON_PHY				(1 << 0)
> +
> +#ifndef MHZ
> +#define MHZ (1000*1000)
> +#endif

this header is so small that it doesn't make sense to have it. pleae
move these macros to C source file itself ;-)

-- 
balbi

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 192 bytes --]

_______________________________________________
devicetree-discuss mailing list
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

[PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg

[Felipe Balbi]

Hi,

On Fri, Aug 10, 2012 at 12:40:27PM +0530, Praveen Paneri wrote:
> This driver uses usb_phy interface to interact with s3c-hsotg. Supports
> phy_init and phy_shutdown functions to enable/disable phy. Tested with
> smdk6410 and smdkv310. More SoCs can be brought under later.
> 
> Signed-off-by: Praveen Paneri <p.paneri@samsung.com>
> Acked-by: Heiko Stuebner <heiko@sntech.de>

this looks good. Just 2 comments below.

> ---
>  .../devicetree/bindings/usb/samsung-usbphy.txt     |    9 +
>  drivers/usb/phy/Kconfig                            |    8 +
>  drivers/usb/phy/Makefile                           |    1 +
>  drivers/usb/phy/samsung-usbphy.c                   |  345 ++++++++++++++++++++
>  drivers/usb/phy/samsung-usbphy.h                   |   48 +++
>  include/linux/platform_data/samsung-usbphy.h       |   27 ++
>  6 files changed, 438 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>  create mode 100644 drivers/usb/phy/samsung-usbphy.c
>  create mode 100644 drivers/usb/phy/samsung-usbphy.h
>  create mode 100644 include/linux/platform_data/samsung-usbphy.h
> 
> diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> new file mode 100644
> index 0000000..fefd9c8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> @@ -0,0 +1,9 @@
> +* Samsung's usb phy transceiver
> +
> +The Samsung's phy transceiver is used for controlling usb otg phy for
> +s3c-hsotg usb device controller.
> +
> +Required properties:
> +- compatible : should be "samsung,exynos4210-usbphy"
> +- reg : base physical address of the phy registers and length of memory mapped
> +	region.
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index e7cf84f..d916477 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -15,3 +15,11 @@ config USB_ISP1301
>  
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called isp1301.
> +
> +config SAMSUNG_USBPHY
> +       bool "Samsung USB PHY controller Driver"
> +       depends on USB_S3C_HSOTG
> +       select USB_OTG_UTILS
> +       help
> +         Enable this to support Samsung USB phy controller for samsung
> +         SoCs.
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index eca095b..dfca70d 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -5,3 +5,4 @@
>  ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>  
>  obj-$(CONFIG_USB_ISP1301)		+= isp1301.o
> +obj-$(CONFIG_SAMSUNG_USBPHY)		+= samsung-usbphy.o
> diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
> new file mode 100644
> index 0000000..739b6c9
> --- /dev/null
> +++ b/drivers/usb/phy/samsung-usbphy.c
> @@ -0,0 +1,345 @@
> +/* linux/drivers/usb/phy/samsung-usbphy.c
> + *
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + *              http://www.samsung.com
> + *
> + * Author: Praveen Paneri <p.paneri@samsung.com>
> + *
> + * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> +*/
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/usb/otg.h>
> +#include <linux/platform_data/samsung-usbphy.h>
> +
> +#include "samsung-usbphy.h"
> +
> +enum samsung_cpu_type {
> +	TYPE_S3C64XX,
> +	TYPE_EXYNOS4210,
> +};
> +
> +/*
> + * struct samsung_usbphy - transceiver driver state
> + * @phy: transceiver structure
> + * @plat: platform data
> + * @dev: The parent device supplied to the probe function
> + * @clk: usb phy clock
> + * @regs: usb phy register memory base
> + * @cpu_type: machine identifier
> + */
> +struct samsung_usbphy {
> +	struct usb_phy	phy;
> +	struct samsung_usbphy_data *plat;
> +	struct device	*dev;
> +	struct clk	*clk;
> +	void __iomem	*regs;
> +	int		cpu_type;
> +};
> +
> +#define phy_to_sphy(x)		container_of((x), struct samsung_usbphy, phy)
> +
> +/*
> + * Enables or disables the phy clock
> + * returns 0 on success else the error
> + */
> +static int samsung_usbphy_clk_control(struct samsung_usbphy *sphy, bool on)
> +{
> +	if (on) {
> +		if (!sphy->clk) {
> +			sphy->clk = clk_get(sphy->dev, "otg");
> +			if (IS_ERR(sphy->clk)) {
> +				dev_err(sphy->dev, "Failed to get otg clock\n");
> +				return PTR_ERR(sphy->clk);
> +			}
> +		}
> +		clk_enable(sphy->clk);
> +	} else {
> +		clk_disable(sphy->clk);
> +		clk_put(sphy->clk);
> +	}
> +
> +	return 0;
> +}
> +
> +/*
> + * Returns reference clock frequency
> + */
> +static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
> +{
> +	struct clk *ref_clk;
> +	int refclk_freq = 0;
> +
> +	ref_clk = clk_get(sphy->dev, "xusbxti");
> +	if (IS_ERR(ref_clk)) {
> +		dev_err(sphy->dev, "Failed to get reference clock\n");
> +		return PTR_ERR(ref_clk);
> +	}
> +
> +	switch (clk_get_rate(ref_clk)) {
> +	case 12 * MHZ:
> +		refclk_freq |= S3C_PHYCLK_CLKSEL_12M;
> +		break;
> +	case 24 * MHZ:
> +		refclk_freq |= S3C_PHYCLK_CLKSEL_24M;
> +		break;
> +	default:
> +	case 48 * MHZ:
> +		/* default reference clock */
> +		refclk_freq |= S3C_PHYCLK_CLKSEL_48M;
> +		break;
> +	}
> +	clk_put(ref_clk);
> +
> +	return refclk_freq;
> +}
> +
> +static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
> +{
> +	void __iomem *regs = sphy->regs;
> +	u32 phypwr;
> +	u32 phyclk;
> +	u32 rstcon;
> +
> +	/* set clock frequency for PLL */
> +	phyclk = samsung_usbphy_get_refclk_freq(sphy);
> +	phypwr = readl(regs + S3C_PHYPWR);
> +	rstcon = readl(regs + S3C_RSTCON);
> +
> +	switch (sphy->cpu_type) {
> +	case TYPE_S3C64XX:
> +		phyclk &= ~(S3C_PHYCLK_COMMON_ON_N);
> +		phypwr &= ~S3C_PHYPWR_NORMAL_MASK;
> +		rstcon |= S3C_RSTCON_PHY;
> +		break;
> +	case TYPE_EXYNOS4210:
> +		phypwr &= ~EXYNOS4_PHYPWR_NORMAL_MASK;
> +		rstcon |= S3C_RSTCON_PHY;
> +	default:
> +		break;
> +	}
> +
> +	writel(phyclk, regs + S3C_PHYCLK);
> +	/* set to normal of PHY0 */
> +	writel(phypwr, regs + S3C_PHYPWR);
> +	/* reset all ports of PHY and Link */
> +	writel(rstcon, regs + S3C_RSTCON);
> +	udelay(10);
> +	rstcon &= ~S3C_RSTCON_PHY;
> +	writel(rstcon, regs + S3C_RSTCON);
> +}
> +
> +static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
> +{
> +	void __iomem *regs = sphy->regs;
> +	u32 phypwr;
> +
> +	phypwr = readl(regs + S3C_PHYPWR);
> +
> +	switch (sphy->cpu_type) {
> +	case TYPE_S3C64XX:
> +		phypwr |= S3C_PHYPWR_NORMAL_MASK;
> +		break;
> +	case TYPE_EXYNOS4210:
> +		phypwr |= EXYNOS4_PHYPWR_NORMAL_MASK;
> +	default:
> +		break;
> +	}
> +
> +	/* unset to normal of PHY0 */
> +	writel(phypwr, regs + S3C_PHYPWR);
> +}
> +
> +/*
> + * The function passed to the usb driver for phy initialization
> + */
> +static int samsung_usbphy_init(struct usb_phy *phy)
> +{
> +	struct samsung_usbphy *sphy;
> +	int ret = 0;
> +
> +	sphy = phy_to_sphy(phy);
> +
> +	/* Enable the phy clock */
> +	ret = samsung_usbphy_clk_control(sphy, true);
> +	if (ret) {
> +		dev_err(sphy->dev, "phy clock enable failed\n");
> +		return ret;
> +	}
> +
> +	/* Disable phy isolation */
> +	if (sphy->plat && sphy->plat->pmu_isolation)
> +		sphy->plat->pmu_isolation(false);
> +
> +	/* Initialize usb phy registers */
> +	samsung_usbphy_enable(sphy);
> +	return ret;
> +}
> +
> +/*
> + * The function passed to the usb driver for phy shutdown
> + */
> +static void samsung_usbphy_shutdown(struct usb_phy *phy)
> +{
> +	struct samsung_usbphy *sphy;
> +
> +	sphy = phy_to_sphy(phy);
> +
> +	/* De-initialize usb phy registers */
> +	samsung_usbphy_disable(sphy);
> +
> +	/* Enable phy isolation */
> +	if (sphy->plat && sphy->plat->pmu_isolation)
> +		sphy->plat->pmu_isolation(true);
> +
> +	/* Disable the phy clock */
> +	samsung_usbphy_clk_control(sphy, false);
> +}
> +
> +static const struct of_device_id samsung_usbphy_dt_match[];
> +
> +static inline int samsung_usbphy_get_driver_data(struct platform_device *pdev)
> +{
> +#ifdef CONFIG_OF
> +	int data;
> +	if (pdev->dev.of_node) {
> +		const struct of_device_id *match;
> +		match = of_match_node(samsung_usbphy_dt_match,
> +							pdev->dev.of_node);
> +		data = (int) match->data;
> +		return data;
> +	}
> +#endif
> +	return platform_get_device_id(pdev)->driver_data;
> +}
> +
> +static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
> +{
> +	struct samsung_usbphy *sphy;
> +	struct samsung_usbphy_data *pdata;
> +	struct device *dev = &pdev->dev;
> +	struct resource *phy_mem;
> +	void __iomem	*phy_base;
> +	int	ret;
> +
> +	pdata = pdev->dev.platform_data;
> +	if (!pdata) {
> +		dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
> +		return -EINVAL;
> +	}
> +
> +	phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!phy_mem) {
> +		dev_err(dev, "%s: missing mem resource\n", __func__);
> +		return -ENODEV;
> +	}
> +
> +	phy_base = devm_request_and_ioremap(dev, phy_mem);
> +	if (!phy_base) {
> +		dev_err(dev, "%s: register mapping failed\n", __func__);
> +		return -ENXIO;
> +	}
> +
> +	sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
> +	if (!sphy)
> +		return -ENOMEM;
> +
> +	sphy->dev		= &pdev->dev;
> +	sphy->plat		= pdata;
> +	sphy->regs		= phy_base;
> +	sphy->phy.dev		= sphy->dev;
> +	sphy->phy.label		= "samsung-usbphy";
> +	sphy->phy.init		= samsung_usbphy_init;
> +	sphy->phy.shutdown	= samsung_usbphy_shutdown;
> +	sphy->cpu_type		= samsung_usbphy_get_driver_data(pdev);
> +
> +	ret = usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
> +	if (ret)
> +		goto err;
> +
> +	platform_set_drvdata(pdev, sphy);
> +
> +	dev_info(&pdev->dev, "Initialized samsung USB OTG PHY module\n");

please avoid dev_info() at the end of probe. It just makes booting
noisier.

> +err:
> +	return ret;
> +}
> +
> +static int __exit samsung_usbphy_remove(struct platform_device *pdev)
> +{
> +	struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
> +
> +	usb_remove_phy(&sphy->phy);
> +
> +	if (sphy->clk) {
> +		clk_put(sphy->clk);
> +		sphy->clk = NULL;
> +	}
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id samsung_usbphy_dt_match[] = {
> +	{
> +		.compatible = "samsung,s3c64xx-usbphy",
> +		.data = (void *)TYPE_S3C64XX,
> +	}, {
> +		.compatible = "samsung,exynos4210-usbphy",
> +		.data = (void *)TYPE_EXYNOS4210,
> +	},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
> +#else
> +#define samsung_usbphy_dt_match NULL
> +#endif
> +
> +static struct platform_device_id samsung_usbphy_driver_ids[] = {
> +	{
> +		.name		= "s3c64xx-usbphy",
> +		.driver_data	= TYPE_S3C64XX,
> +	}, {
> +		.name		= "exynos4210-usbphy",
> +		.driver_data	= TYPE_EXYNOS4210,
> +	},
> +	{},
> +};
> +
> +MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
> +
> +static struct platform_driver samsung_usbphy_driver = {
> +	.probe		= samsung_usbphy_probe,
> +	.remove		= __devexit_p(samsung_usbphy_remove),
> +	.id_table	= samsung_usbphy_driver_ids,
> +	.driver		= {
> +		.name	= "samsung-usbphy",
> +		.owner	= THIS_MODULE,
> +		.of_match_table = samsung_usbphy_dt_match,
> +	},
> +};
> +
> +module_platform_driver(samsung_usbphy_driver);
> +
> +MODULE_DESCRIPTION("Samsung USB phy controller");
> +MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:samsung-usbphy");
> diff --git a/drivers/usb/phy/samsung-usbphy.h b/drivers/usb/phy/samsung-usbphy.h
> new file mode 100644
> index 0000000..093b1dc
> --- /dev/null
> +++ b/drivers/usb/phy/samsung-usbphy.h
> @@ -0,0 +1,48 @@
> +/*
> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> + * Author: Yulgon Kim <yulgon.kim@samsung.com>
> + * Author: Joonyoung Shim <jy0922.shim@samsung.com>
> + * Author: Praveen Paneri <p.paneri@samsung.com>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __SAMSUNG_USBPHY_H
> +#define __SAMSUNG_USBPHY_H
> +
> +#define S3C_PHYPWR				(0x00)
> +
> +#define S3C_PHYPWR_NORMAL_MASK			(0x19 << 0)
> +#define S3C_PHYPWR_OTG_DISABLE			(1 << 4)
> +#define S3C_PHYPWR_ANALOG_POWERDOWN		(1 << 3)
> +#define S3C_PHYPWR_FORCE_SUSPEND		(1 << 1)
> +/* For Exynos4 */
> +#define EXYNOS4_PHYPWR_NORMAL_MASK		(0x39 << 0)
> +#define EXYNOS4_PHYPWR_SLEEP			(1 << 5)
> +
> +#define S3C_PHYCLK				(0x04)
> +
> +#define S3C_PHYCLK_MODE_SERIAL			(1 << 6)
> +#define S3C_PHYCLK_EXT_OSC			(1 << 5)
> +#define S3C_PHYCLK_COMMON_ON_N			(1 << 4)
> +#define S3C_PHYCLK_ID_PULL			(1 << 2)
> +#define S3C_PHYCLK_CLKSEL_MASK			(0x3 << 0)
> +#define S3C_PHYCLK_CLKSEL_SHIFT			(0)
> +#define S3C_PHYCLK_CLKSEL_48M			(0x0 << 0)
> +#define S3C_PHYCLK_CLKSEL_12M			(0x2 << 0)
> +#define S3C_PHYCLK_CLKSEL_24M			(0x3 << 0)
> +
> +#define S3C_RSTCON				(0x08)
> +
> +#define S3C_RSTCON_PHYCLK			(1 << 2)
> +#define S3C_RSTCON_HCLK				(1 << 1)
> +#define S3C_RSTCON_PHY				(1 << 0)
> +
> +#ifndef MHZ
> +#define MHZ (1000*1000)
> +#endif

this header is so small that it doesn't make sense to have it. pleae
move these macros to C source file itself ;-)

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120810/60f0d152/attachment-0001.sig>

Re: [PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 1744 bytes --]

On Fri, Aug 10, 2012 at 12:40:26PM +0530, Praveen Paneri wrote:
> Changes from v3:
> Replaced susbsys_initcall()/module_exit() by module_platform_driver().
> Accordingly in the hsotg driver returned -EPROBE_DEFER until phy driver
> is registered
> Removed unnecessary devm_usb_put_phy() call from the hsotg driver remove.
> 
> Changes from v2:
> Changed the driver filenames to samsung-usbphy
> Changed 's3c' to 'samsung' for platform device as well as platform data
> Moved platform data structure to a separate file
> Rectified coding style related errors
> 
> Changes from v1:
> Rebased patches to latest usb-next branch
> Changed the name 'sec_usbphy' to 'samsung_usbphy'
> 
> This patch set introduces a phy driver for samsung SoCs. It uses the existing
> transceiver infrastructure to provide phy control functions. Use of this driver
> can be extended for usb host phy as well. Over the period of time all the phy
> related code for most of the samsung SoCs can be integrated here.
> Removing the existing phy code from mach-s3c64xx. Same can be done for other SoCs
> when they start supporting this phy driver. 
> This driver is tested with smdk6410 and Exynos4210(with DT).
> 
> Praveen Paneri (5):
>   usb: phy: samsung: Introducing usb phy driver for hsotg
>   usb: s3c-hsotg: Adding phy driver support
>   ARM: S3C64XX: Removing old phy setup code
>   ARM: S3C64XX: Enabling samsung-usbphy driver
>   ARM: Exynos4210: Enabling samsung-usbphy driver

just one idea. It looks like after introducing the PHY, you converted
all users to create the phy device. I wonder if you should have a
patch 6/6 which will remove pdata->init support from s3c_hsotg.c and
stick to using phy driver.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs

[Felipe Balbi]

On Fri, Aug 10, 2012 at 12:40:26PM +0530, Praveen Paneri wrote:
> Changes from v3:
> Replaced susbsys_initcall()/module_exit() by module_platform_driver().
> Accordingly in the hsotg driver returned -EPROBE_DEFER until phy driver
> is registered
> Removed unnecessary devm_usb_put_phy() call from the hsotg driver remove.
> 
> Changes from v2:
> Changed the driver filenames to samsung-usbphy
> Changed 's3c' to 'samsung' for platform device as well as platform data
> Moved platform data structure to a separate file
> Rectified coding style related errors
> 
> Changes from v1:
> Rebased patches to latest usb-next branch
> Changed the name 'sec_usbphy' to 'samsung_usbphy'
> 
> This patch set introduces a phy driver for samsung SoCs. It uses the existing
> transceiver infrastructure to provide phy control functions. Use of this driver
> can be extended for usb host phy as well. Over the period of time all the phy
> related code for most of the samsung SoCs can be integrated here.
> Removing the existing phy code from mach-s3c64xx. Same can be done for other SoCs
> when they start supporting this phy driver. 
> This driver is tested with smdk6410 and Exynos4210(with DT).
> 
> Praveen Paneri (5):
>   usb: phy: samsung: Introducing usb phy driver for hsotg
>   usb: s3c-hsotg: Adding phy driver support
>   ARM: S3C64XX: Removing old phy setup code
>   ARM: S3C64XX: Enabling samsung-usbphy driver
>   ARM: Exynos4210: Enabling samsung-usbphy driver

just one idea. It looks like after introducing the PHY, you converted
all users to create the phy device. I wonder if you should have a
patch 6/6 which will remove pdata->init support from s3c_hsotg.c and
stick to using phy driver.

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120810/2ddf73c1/attachment.sig>

[PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs

[Praveen Paneri]

Changes from v3:
Replaced susbsys_initcall()/module_exit() by module_platform_driver().
Accordingly in the hsotg driver returned -EPROBE_DEFER until phy driver
is registered
Removed unnecessary devm_usb_put_phy() call from the hsotg driver remove.

Changes from v2:
Changed the driver filenames to samsung-usbphy
Changed 's3c' to 'samsung' for platform device as well as platform data
Moved platform data structure to a separate file
Rectified coding style related errors

Changes from v1:
Rebased patches to latest usb-next branch
Changed the name 'sec_usbphy' to 'samsung_usbphy'

This patch set introduces a phy driver for samsung SoCs. It uses the existing
transceiver infrastructure to provide phy control functions. Use of this driver
can be extended for usb host phy as well. Over the period of time all the phy
related code for most of the samsung SoCs can be integrated here.
Removing the existing phy code from mach-s3c64xx. Same can be done for other SoCs
when they start supporting this phy driver. 
This driver is tested with smdk6410 and Exynos4210(with DT).

Praveen Paneri (5):
  usb: phy: samsung: Introducing usb phy driver for hsotg
  usb: s3c-hsotg: Adding phy driver support
  ARM: S3C64XX: Removing old phy setup code
  ARM: S3C64XX: Enabling samsung-usbphy driver
  ARM: Exynos4210: Enabling samsung-usbphy driver

 .../devicetree/bindings/usb/samsung-usbphy.txt     |    9 +
 arch/arm/boot/dts/exynos4210.dtsi                  |    5 +
 arch/arm/mach-exynos/include/mach/map.h            |    1 +
 arch/arm/mach-exynos/mach-exynos4-dt.c             |    8 +
 arch/arm/mach-exynos/setup-usb-phy.c               |   13 +
 arch/arm/mach-s3c64xx/include/mach/map.h           |    2 +
 arch/arm/mach-s3c64xx/mach-crag6410.c              |    7 +-
 arch/arm/mach-s3c64xx/mach-smartq.c                |    8 +-
 arch/arm/mach-s3c64xx/mach-smdk6410.c              |    7 +-
 arch/arm/mach-s3c64xx/setup-usb-phy.c              |   79 +----
 arch/arm/plat-samsung/devs.c                       |   33 ++
 arch/arm/plat-samsung/include/plat/devs.h          |    1 +
 arch/arm/plat-samsung/include/plat/usb-phy.h       |    1 +
 drivers/usb/gadget/s3c-hsotg.c                     |   37 ++-
 drivers/usb/phy/Kconfig                            |    8 +
 drivers/usb/phy/Makefile                           |    1 +
 drivers/usb/phy/samsung-usbphy.c                   |  345 ++++++++++++++++++++
 drivers/usb/phy/samsung-usbphy.h                   |   48 +++
 include/linux/platform_data/samsung-usbphy.h       |   27 ++
 19 files changed, 549 insertions(+), 91 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
 create mode 100644 drivers/usb/phy/samsung-usbphy.c
 create mode 100644 drivers/usb/phy/samsung-usbphy.h
 create mode 100644 include/linux/platform_data/samsung-usbphy.h

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs

[Praveen Paneri]

Changes from v3:
Replaced susbsys_initcall()/module_exit() by module_platform_driver().
Accordingly in the hsotg driver returned -EPROBE_DEFER until phy driver
is registered
Removed unnecessary devm_usb_put_phy() call from the hsotg driver remove.

Changes from v2:
Changed the driver filenames to samsung-usbphy
Changed 's3c' to 'samsung' for platform device as well as platform data
Moved platform data structure to a separate file
Rectified coding style related errors

Changes from v1:
Rebased patches to latest usb-next branch
Changed the name 'sec_usbphy' to 'samsung_usbphy'

This patch set introduces a phy driver for samsung SoCs. It uses the existing
transceiver infrastructure to provide phy control functions. Use of this driver
can be extended for usb host phy as well. Over the period of time all the phy
related code for most of the samsung SoCs can be integrated here.
Removing the existing phy code from mach-s3c64xx. Same can be done for other SoCs
when they start supporting this phy driver. 
This driver is tested with smdk6410 and Exynos4210(with DT).

Praveen Paneri (5):
  usb: phy: samsung: Introducing usb phy driver for hsotg
  usb: s3c-hsotg: Adding phy driver support
  ARM: S3C64XX: Removing old phy setup code
  ARM: S3C64XX: Enabling samsung-usbphy driver
  ARM: Exynos4210: Enabling samsung-usbphy driver

 .../devicetree/bindings/usb/samsung-usbphy.txt     |    9 +
 arch/arm/boot/dts/exynos4210.dtsi                  |    5 +
 arch/arm/mach-exynos/include/mach/map.h            |    1 +
 arch/arm/mach-exynos/mach-exynos4-dt.c             |    8 +
 arch/arm/mach-exynos/setup-usb-phy.c               |   13 +
 arch/arm/mach-s3c64xx/include/mach/map.h           |    2 +
 arch/arm/mach-s3c64xx/mach-crag6410.c              |    7 +-
 arch/arm/mach-s3c64xx/mach-smartq.c                |    8 +-
 arch/arm/mach-s3c64xx/mach-smdk6410.c              |    7 +-
 arch/arm/mach-s3c64xx/setup-usb-phy.c              |   79 +----
 arch/arm/plat-samsung/devs.c                       |   33 ++
 arch/arm/plat-samsung/include/plat/devs.h          |    1 +
 arch/arm/plat-samsung/include/plat/usb-phy.h       |    1 +
 drivers/usb/gadget/s3c-hsotg.c                     |   37 ++-
 drivers/usb/phy/Kconfig                            |    8 +
 drivers/usb/phy/Makefile                           |    1 +
 drivers/usb/phy/samsung-usbphy.c                   |  345 ++++++++++++++++++++
 drivers/usb/phy/samsung-usbphy.h                   |   48 +++
 include/linux/platform_data/samsung-usbphy.h       |   27 ++
 19 files changed, 549 insertions(+), 91 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
 create mode 100644 drivers/usb/phy/samsung-usbphy.c
 create mode 100644 drivers/usb/phy/samsung-usbphy.h
 create mode 100644 include/linux/platform_data/samsung-usbphy.h

[PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg

[Praveen Paneri]

This driver uses usb_phy interface to interact with s3c-hsotg. Supports
phy_init and phy_shutdown functions to enable/disable phy. Tested with
smdk6410 and smdkv310. More SoCs can be brought under later.

Signed-off-by: Praveen Paneri <p.paneri-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Acked-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
---
 .../devicetree/bindings/usb/samsung-usbphy.txt     |    9 +
 drivers/usb/phy/Kconfig                            |    8 +
 drivers/usb/phy/Makefile                           |    1 +
 drivers/usb/phy/samsung-usbphy.c                   |  345 ++++++++++++++++++++
 drivers/usb/phy/samsung-usbphy.h                   |   48 +++
 include/linux/platform_data/samsung-usbphy.h       |   27 ++
 6 files changed, 438 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
 create mode 100644 drivers/usb/phy/samsung-usbphy.c
 create mode 100644 drivers/usb/phy/samsung-usbphy.h
 create mode 100644 include/linux/platform_data/samsung-usbphy.h

diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
new file mode 100644
index 0000000..fefd9c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
@@ -0,0 +1,9 @@
+* Samsung's usb phy transceiver
+
+The Samsung's phy transceiver is used for controlling usb otg phy for
+s3c-hsotg usb device controller.
+
+Required properties:
+- compatible : should be "samsung,exynos4210-usbphy"
+- reg : base physical address of the phy registers and length of memory mapped
+	region.
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index e7cf84f..d916477 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -15,3 +15,11 @@ config USB_ISP1301
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called isp1301.
+
+config SAMSUNG_USBPHY
+       bool "Samsung USB PHY controller Driver"
+       depends on USB_S3C_HSOTG
+       select USB_OTG_UTILS
+       help
+         Enable this to support Samsung USB phy controller for samsung
+         SoCs.
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index eca095b..dfca70d 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -5,3 +5,4 @@
 ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_ISP1301)		+= isp1301.o
+obj-$(CONFIG_SAMSUNG_USBPHY)		+= samsung-usbphy.o
diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
new file mode 100644
index 0000000..739b6c9
--- /dev/null
+++ b/drivers/usb/phy/samsung-usbphy.c
@@ -0,0 +1,345 @@
+/* linux/drivers/usb/phy/samsung-usbphy.c
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Author: Praveen Paneri <p.paneri-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
+ *
+ * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/usb/otg.h>
+#include <linux/platform_data/samsung-usbphy.h>
+
+#include "samsung-usbphy.h"
+
+enum samsung_cpu_type {
+	TYPE_S3C64XX,
+	TYPE_EXYNOS4210,
+};
+
+/*
+ * struct samsung_usbphy - transceiver driver state
+ * @phy: transceiver structure
+ * @plat: platform data
+ * @dev: The parent device supplied to the probe function
+ * @clk: usb phy clock
+ * @regs: usb phy register memory base
+ * @cpu_type: machine identifier
+ */
+struct samsung_usbphy {
+	struct usb_phy	phy;
+	struct samsung_usbphy_data *plat;
+	struct device	*dev;
+	struct clk	*clk;
+	void __iomem	*regs;
+	int		cpu_type;
+};
+
+#define phy_to_sphy(x)		container_of((x), struct samsung_usbphy, phy)
+
+/*
+ * Enables or disables the phy clock
+ * returns 0 on success else the error
+ */
+static int samsung_usbphy_clk_control(struct samsung_usbphy *sphy, bool on)
+{
+	if (on) {
+		if (!sphy->clk) {
+			sphy->clk = clk_get(sphy->dev, "otg");
+			if (IS_ERR(sphy->clk)) {
+				dev_err(sphy->dev, "Failed to get otg clock\n");
+				return PTR_ERR(sphy->clk);
+			}
+		}
+		clk_enable(sphy->clk);
+	} else {
+		clk_disable(sphy->clk);
+		clk_put(sphy->clk);
+	}
+
+	return 0;
+}
+
+/*
+ * Returns reference clock frequency
+ */
+static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
+{
+	struct clk *ref_clk;
+	int refclk_freq = 0;
+
+	ref_clk = clk_get(sphy->dev, "xusbxti");
+	if (IS_ERR(ref_clk)) {
+		dev_err(sphy->dev, "Failed to get reference clock\n");
+		return PTR_ERR(ref_clk);
+	}
+
+	switch (clk_get_rate(ref_clk)) {
+	case 12 * MHZ:
+		refclk_freq |= S3C_PHYCLK_CLKSEL_12M;
+		break;
+	case 24 * MHZ:
+		refclk_freq |= S3C_PHYCLK_CLKSEL_24M;
+		break;
+	default:
+	case 48 * MHZ:
+		/* default reference clock */
+		refclk_freq |= S3C_PHYCLK_CLKSEL_48M;
+		break;
+	}
+	clk_put(ref_clk);
+
+	return refclk_freq;
+}
+
+static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
+{
+	void __iomem *regs = sphy->regs;
+	u32 phypwr;
+	u32 phyclk;
+	u32 rstcon;
+
+	/* set clock frequency for PLL */
+	phyclk = samsung_usbphy_get_refclk_freq(sphy);
+	phypwr = readl(regs + S3C_PHYPWR);
+	rstcon = readl(regs + S3C_RSTCON);
+
+	switch (sphy->cpu_type) {
+	case TYPE_S3C64XX:
+		phyclk &= ~(S3C_PHYCLK_COMMON_ON_N);
+		phypwr &= ~S3C_PHYPWR_NORMAL_MASK;
+		rstcon |= S3C_RSTCON_PHY;
+		break;
+	case TYPE_EXYNOS4210:
+		phypwr &= ~EXYNOS4_PHYPWR_NORMAL_MASK;
+		rstcon |= S3C_RSTCON_PHY;
+	default:
+		break;
+	}
+
+	writel(phyclk, regs + S3C_PHYCLK);
+	/* set to normal of PHY0 */
+	writel(phypwr, regs + S3C_PHYPWR);
+	/* reset all ports of PHY and Link */
+	writel(rstcon, regs + S3C_RSTCON);
+	udelay(10);
+	rstcon &= ~S3C_RSTCON_PHY;
+	writel(rstcon, regs + S3C_RSTCON);
+}
+
+static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
+{
+	void __iomem *regs = sphy->regs;
+	u32 phypwr;
+
+	phypwr = readl(regs + S3C_PHYPWR);
+
+	switch (sphy->cpu_type) {
+	case TYPE_S3C64XX:
+		phypwr |= S3C_PHYPWR_NORMAL_MASK;
+		break;
+	case TYPE_EXYNOS4210:
+		phypwr |= EXYNOS4_PHYPWR_NORMAL_MASK;
+	default:
+		break;
+	}
+
+	/* unset to normal of PHY0 */
+	writel(phypwr, regs + S3C_PHYPWR);
+}
+
+/*
+ * The function passed to the usb driver for phy initialization
+ */
+static int samsung_usbphy_init(struct usb_phy *phy)
+{
+	struct samsung_usbphy *sphy;
+	int ret = 0;
+
+	sphy = phy_to_sphy(phy);
+
+	/* Enable the phy clock */
+	ret = samsung_usbphy_clk_control(sphy, true);
+	if (ret) {
+		dev_err(sphy->dev, "phy clock enable failed\n");
+		return ret;
+	}
+
+	/* Disable phy isolation */
+	if (sphy->plat && sphy->plat->pmu_isolation)
+		sphy->plat->pmu_isolation(false);
+
+	/* Initialize usb phy registers */
+	samsung_usbphy_enable(sphy);
+	return ret;
+}
+
+/*
+ * The function passed to the usb driver for phy shutdown
+ */
+static void samsung_usbphy_shutdown(struct usb_phy *phy)
+{
+	struct samsung_usbphy *sphy;
+
+	sphy = phy_to_sphy(phy);
+
+	/* De-initialize usb phy registers */
+	samsung_usbphy_disable(sphy);
+
+	/* Enable phy isolation */
+	if (sphy->plat && sphy->plat->pmu_isolation)
+		sphy->plat->pmu_isolation(true);
+
+	/* Disable the phy clock */
+	samsung_usbphy_clk_control(sphy, false);
+}
+
+static const struct of_device_id samsung_usbphy_dt_match[];
+
+static inline int samsung_usbphy_get_driver_data(struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+	int data;
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(samsung_usbphy_dt_match,
+							pdev->dev.of_node);
+		data = (int) match->data;
+		return data;
+	}
+#endif
+	return platform_get_device_id(pdev)->driver_data;
+}
+
+static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
+{
+	struct samsung_usbphy *sphy;
+	struct samsung_usbphy_data *pdata;
+	struct device *dev = &pdev->dev;
+	struct resource *phy_mem;
+	void __iomem	*phy_base;
+	int	ret;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
+		return -EINVAL;
+	}
+
+	phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!phy_mem) {
+		dev_err(dev, "%s: missing mem resource\n", __func__);
+		return -ENODEV;
+	}
+
+	phy_base = devm_request_and_ioremap(dev, phy_mem);
+	if (!phy_base) {
+		dev_err(dev, "%s: register mapping failed\n", __func__);
+		return -ENXIO;
+	}
+
+	sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
+	if (!sphy)
+		return -ENOMEM;
+
+	sphy->dev		= &pdev->dev;
+	sphy->plat		= pdata;
+	sphy->regs		= phy_base;
+	sphy->phy.dev		= sphy->dev;
+	sphy->phy.label		= "samsung-usbphy";
+	sphy->phy.init		= samsung_usbphy_init;
+	sphy->phy.shutdown	= samsung_usbphy_shutdown;
+	sphy->cpu_type		= samsung_usbphy_get_driver_data(pdev);
+
+	ret = usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
+	if (ret)
+		goto err;
+
+	platform_set_drvdata(pdev, sphy);
+
+	dev_info(&pdev->dev, "Initialized samsung USB OTG PHY module\n");
+err:
+	return ret;
+}
+
+static int __exit samsung_usbphy_remove(struct platform_device *pdev)
+{
+	struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&sphy->phy);
+
+	if (sphy->clk) {
+		clk_put(sphy->clk);
+		sphy->clk = NULL;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id samsung_usbphy_dt_match[] = {
+	{
+		.compatible = "samsung,s3c64xx-usbphy",
+		.data = (void *)TYPE_S3C64XX,
+	}, {
+		.compatible = "samsung,exynos4210-usbphy",
+		.data = (void *)TYPE_EXYNOS4210,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
+#else
+#define samsung_usbphy_dt_match NULL
+#endif
+
+static struct platform_device_id samsung_usbphy_driver_ids[] = {
+	{
+		.name		= "s3c64xx-usbphy",
+		.driver_data	= TYPE_S3C64XX,
+	}, {
+		.name		= "exynos4210-usbphy",
+		.driver_data	= TYPE_EXYNOS4210,
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
+
+static struct platform_driver samsung_usbphy_driver = {
+	.probe		= samsung_usbphy_probe,
+	.remove		= __devexit_p(samsung_usbphy_remove),
+	.id_table	= samsung_usbphy_driver_ids,
+	.driver		= {
+		.name	= "samsung-usbphy",
+		.owner	= THIS_MODULE,
+		.of_match_table = samsung_usbphy_dt_match,
+	},
+};
+
+module_platform_driver(samsung_usbphy_driver);
+
+MODULE_DESCRIPTION("Samsung USB phy controller");
+MODULE_AUTHOR("Praveen Paneri <p.paneri-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-usbphy");
diff --git a/drivers/usb/phy/samsung-usbphy.h b/drivers/usb/phy/samsung-usbphy.h
new file mode 100644
index 0000000..093b1dc
--- /dev/null
+++ b/drivers/usb/phy/samsung-usbphy.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Author: Yulgon Kim <yulgon.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
+ * Author: Joonyoung Shim <jy0922.shim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
+ * Author: Praveen Paneri <p.paneri-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __SAMSUNG_USBPHY_H
+#define __SAMSUNG_USBPHY_H
+
+#define S3C_PHYPWR				(0x00)
+
+#define S3C_PHYPWR_NORMAL_MASK			(0x19 << 0)
+#define S3C_PHYPWR_OTG_DISABLE			(1 << 4)
+#define S3C_PHYPWR_ANALOG_POWERDOWN		(1 << 3)
+#define S3C_PHYPWR_FORCE_SUSPEND		(1 << 1)
+/* For Exynos4 */
+#define EXYNOS4_PHYPWR_NORMAL_MASK		(0x39 << 0)
+#define EXYNOS4_PHYPWR_SLEEP			(1 << 5)
+
+#define S3C_PHYCLK				(0x04)
+
+#define S3C_PHYCLK_MODE_SERIAL			(1 << 6)
+#define S3C_PHYCLK_EXT_OSC			(1 << 5)
+#define S3C_PHYCLK_COMMON_ON_N			(1 << 4)
+#define S3C_PHYCLK_ID_PULL			(1 << 2)
+#define S3C_PHYCLK_CLKSEL_MASK			(0x3 << 0)
+#define S3C_PHYCLK_CLKSEL_SHIFT			(0)
+#define S3C_PHYCLK_CLKSEL_48M			(0x0 << 0)
+#define S3C_PHYCLK_CLKSEL_12M			(0x2 << 0)
+#define S3C_PHYCLK_CLKSEL_24M			(0x3 << 0)
+
+#define S3C_RSTCON				(0x08)
+
+#define S3C_RSTCON_PHYCLK			(1 << 2)
+#define S3C_RSTCON_HCLK				(1 << 1)
+#define S3C_RSTCON_PHY				(1 << 0)
+
+#ifndef MHZ
+#define MHZ (1000*1000)
+#endif
+
+#endif /* __SAMSUNG_USBPHY_H */
diff --git a/include/linux/platform_data/samsung-usbphy.h b/include/linux/platform_data/samsung-usbphy.h
new file mode 100644
index 0000000..1bd24cb
--- /dev/null
+++ b/include/linux/platform_data/samsung-usbphy.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *		http://www.samsung.com/
+ * Author: Praveen Paneri <p.paneri-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
+ *
+ * Defines platform data for samsung usb phy driver.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __SAMSUNG_USBPHY_PLATFORM_H
+#define __SAMSUNG_USBPHY_PLATFORM_H
+
+/**
+ * samsung_usbphy_data - Platform data for USB PHY driver.
+ * @pmu_isolation: Function to control usb phy isolation in PMU.
+ */
+struct samsung_usbphy_data {
+	void (*pmu_isolation)(int on);
+};
+
+extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd);
+
+#endif /* __SAMSUNG_USBPHY_PLATFORM_H */
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg

[Praveen Paneri]

This driver uses usb_phy interface to interact with s3c-hsotg. Supports
phy_init and phy_shutdown functions to enable/disable phy. Tested with
smdk6410 and smdkv310. More SoCs can be brought under later.

Signed-off-by: Praveen Paneri <p.paneri@samsung.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
---
 .../devicetree/bindings/usb/samsung-usbphy.txt     |    9 +
 drivers/usb/phy/Kconfig                            |    8 +
 drivers/usb/phy/Makefile                           |    1 +
 drivers/usb/phy/samsung-usbphy.c                   |  345 ++++++++++++++++++++
 drivers/usb/phy/samsung-usbphy.h                   |   48 +++
 include/linux/platform_data/samsung-usbphy.h       |   27 ++
 6 files changed, 438 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
 create mode 100644 drivers/usb/phy/samsung-usbphy.c
 create mode 100644 drivers/usb/phy/samsung-usbphy.h
 create mode 100644 include/linux/platform_data/samsung-usbphy.h

diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
new file mode 100644
index 0000000..fefd9c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
@@ -0,0 +1,9 @@
+* Samsung's usb phy transceiver
+
+The Samsung's phy transceiver is used for controlling usb otg phy for
+s3c-hsotg usb device controller.
+
+Required properties:
+- compatible : should be "samsung,exynos4210-usbphy"
+- reg : base physical address of the phy registers and length of memory mapped
+	region.
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index e7cf84f..d916477 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -15,3 +15,11 @@ config USB_ISP1301
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called isp1301.
+
+config SAMSUNG_USBPHY
+       bool "Samsung USB PHY controller Driver"
+       depends on USB_S3C_HSOTG
+       select USB_OTG_UTILS
+       help
+         Enable this to support Samsung USB phy controller for samsung
+         SoCs.
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index eca095b..dfca70d 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -5,3 +5,4 @@
 ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_ISP1301)		+= isp1301.o
+obj-$(CONFIG_SAMSUNG_USBPHY)		+= samsung-usbphy.o
diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
new file mode 100644
index 0000000..739b6c9
--- /dev/null
+++ b/drivers/usb/phy/samsung-usbphy.c
@@ -0,0 +1,345 @@
+/* linux/drivers/usb/phy/samsung-usbphy.c
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Author: Praveen Paneri <p.paneri@samsung.com>
+ *
+ * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/usb/otg.h>
+#include <linux/platform_data/samsung-usbphy.h>
+
+#include "samsung-usbphy.h"
+
+enum samsung_cpu_type {
+	TYPE_S3C64XX,
+	TYPE_EXYNOS4210,
+};
+
+/*
+ * struct samsung_usbphy - transceiver driver state
+ * @phy: transceiver structure
+ * @plat: platform data
+ * @dev: The parent device supplied to the probe function
+ * @clk: usb phy clock
+ * @regs: usb phy register memory base
+ * @cpu_type: machine identifier
+ */
+struct samsung_usbphy {
+	struct usb_phy	phy;
+	struct samsung_usbphy_data *plat;
+	struct device	*dev;
+	struct clk	*clk;
+	void __iomem	*regs;
+	int		cpu_type;
+};
+
+#define phy_to_sphy(x)		container_of((x), struct samsung_usbphy, phy)
+
+/*
+ * Enables or disables the phy clock
+ * returns 0 on success else the error
+ */
+static int samsung_usbphy_clk_control(struct samsung_usbphy *sphy, bool on)
+{
+	if (on) {
+		if (!sphy->clk) {
+			sphy->clk = clk_get(sphy->dev, "otg");
+			if (IS_ERR(sphy->clk)) {
+				dev_err(sphy->dev, "Failed to get otg clock\n");
+				return PTR_ERR(sphy->clk);
+			}
+		}
+		clk_enable(sphy->clk);
+	} else {
+		clk_disable(sphy->clk);
+		clk_put(sphy->clk);
+	}
+
+	return 0;
+}
+
+/*
+ * Returns reference clock frequency
+ */
+static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
+{
+	struct clk *ref_clk;
+	int refclk_freq = 0;
+
+	ref_clk = clk_get(sphy->dev, "xusbxti");
+	if (IS_ERR(ref_clk)) {
+		dev_err(sphy->dev, "Failed to get reference clock\n");
+		return PTR_ERR(ref_clk);
+	}
+
+	switch (clk_get_rate(ref_clk)) {
+	case 12 * MHZ:
+		refclk_freq |= S3C_PHYCLK_CLKSEL_12M;
+		break;
+	case 24 * MHZ:
+		refclk_freq |= S3C_PHYCLK_CLKSEL_24M;
+		break;
+	default:
+	case 48 * MHZ:
+		/* default reference clock */
+		refclk_freq |= S3C_PHYCLK_CLKSEL_48M;
+		break;
+	}
+	clk_put(ref_clk);
+
+	return refclk_freq;
+}
+
+static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
+{
+	void __iomem *regs = sphy->regs;
+	u32 phypwr;
+	u32 phyclk;
+	u32 rstcon;
+
+	/* set clock frequency for PLL */
+	phyclk = samsung_usbphy_get_refclk_freq(sphy);
+	phypwr = readl(regs + S3C_PHYPWR);
+	rstcon = readl(regs + S3C_RSTCON);
+
+	switch (sphy->cpu_type) {
+	case TYPE_S3C64XX:
+		phyclk &= ~(S3C_PHYCLK_COMMON_ON_N);
+		phypwr &= ~S3C_PHYPWR_NORMAL_MASK;
+		rstcon |= S3C_RSTCON_PHY;
+		break;
+	case TYPE_EXYNOS4210:
+		phypwr &= ~EXYNOS4_PHYPWR_NORMAL_MASK;
+		rstcon |= S3C_RSTCON_PHY;
+	default:
+		break;
+	}
+
+	writel(phyclk, regs + S3C_PHYCLK);
+	/* set to normal of PHY0 */
+	writel(phypwr, regs + S3C_PHYPWR);
+	/* reset all ports of PHY and Link */
+	writel(rstcon, regs + S3C_RSTCON);
+	udelay(10);
+	rstcon &= ~S3C_RSTCON_PHY;
+	writel(rstcon, regs + S3C_RSTCON);
+}
+
+static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
+{
+	void __iomem *regs = sphy->regs;
+	u32 phypwr;
+
+	phypwr = readl(regs + S3C_PHYPWR);
+
+	switch (sphy->cpu_type) {
+	case TYPE_S3C64XX:
+		phypwr |= S3C_PHYPWR_NORMAL_MASK;
+		break;
+	case TYPE_EXYNOS4210:
+		phypwr |= EXYNOS4_PHYPWR_NORMAL_MASK;
+	default:
+		break;
+	}
+
+	/* unset to normal of PHY0 */
+	writel(phypwr, regs + S3C_PHYPWR);
+}
+
+/*
+ * The function passed to the usb driver for phy initialization
+ */
+static int samsung_usbphy_init(struct usb_phy *phy)
+{
+	struct samsung_usbphy *sphy;
+	int ret = 0;
+
+	sphy = phy_to_sphy(phy);
+
+	/* Enable the phy clock */
+	ret = samsung_usbphy_clk_control(sphy, true);
+	if (ret) {
+		dev_err(sphy->dev, "phy clock enable failed\n");
+		return ret;
+	}
+
+	/* Disable phy isolation */
+	if (sphy->plat && sphy->plat->pmu_isolation)
+		sphy->plat->pmu_isolation(false);
+
+	/* Initialize usb phy registers */
+	samsung_usbphy_enable(sphy);
+	return ret;
+}
+
+/*
+ * The function passed to the usb driver for phy shutdown
+ */
+static void samsung_usbphy_shutdown(struct usb_phy *phy)
+{
+	struct samsung_usbphy *sphy;
+
+	sphy = phy_to_sphy(phy);
+
+	/* De-initialize usb phy registers */
+	samsung_usbphy_disable(sphy);
+
+	/* Enable phy isolation */
+	if (sphy->plat && sphy->plat->pmu_isolation)
+		sphy->plat->pmu_isolation(true);
+
+	/* Disable the phy clock */
+	samsung_usbphy_clk_control(sphy, false);
+}
+
+static const struct of_device_id samsung_usbphy_dt_match[];
+
+static inline int samsung_usbphy_get_driver_data(struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+	int data;
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(samsung_usbphy_dt_match,
+							pdev->dev.of_node);
+		data = (int) match->data;
+		return data;
+	}
+#endif
+	return platform_get_device_id(pdev)->driver_data;
+}
+
+static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
+{
+	struct samsung_usbphy *sphy;
+	struct samsung_usbphy_data *pdata;
+	struct device *dev = &pdev->dev;
+	struct resource *phy_mem;
+	void __iomem	*phy_base;
+	int	ret;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
+		return -EINVAL;
+	}
+
+	phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!phy_mem) {
+		dev_err(dev, "%s: missing mem resource\n", __func__);
+		return -ENODEV;
+	}
+
+	phy_base = devm_request_and_ioremap(dev, phy_mem);
+	if (!phy_base) {
+		dev_err(dev, "%s: register mapping failed\n", __func__);
+		return -ENXIO;
+	}
+
+	sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
+	if (!sphy)
+		return -ENOMEM;
+
+	sphy->dev		= &pdev->dev;
+	sphy->plat		= pdata;
+	sphy->regs		= phy_base;
+	sphy->phy.dev		= sphy->dev;
+	sphy->phy.label		= "samsung-usbphy";
+	sphy->phy.init		= samsung_usbphy_init;
+	sphy->phy.shutdown	= samsung_usbphy_shutdown;
+	sphy->cpu_type		= samsung_usbphy_get_driver_data(pdev);
+
+	ret = usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
+	if (ret)
+		goto err;
+
+	platform_set_drvdata(pdev, sphy);
+
+	dev_info(&pdev->dev, "Initialized samsung USB OTG PHY module\n");
+err:
+	return ret;
+}
+
+static int __exit samsung_usbphy_remove(struct platform_device *pdev)
+{
+	struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&sphy->phy);
+
+	if (sphy->clk) {
+		clk_put(sphy->clk);
+		sphy->clk = NULL;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id samsung_usbphy_dt_match[] = {
+	{
+		.compatible = "samsung,s3c64xx-usbphy",
+		.data = (void *)TYPE_S3C64XX,
+	}, {
+		.compatible = "samsung,exynos4210-usbphy",
+		.data = (void *)TYPE_EXYNOS4210,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
+#else
+#define samsung_usbphy_dt_match NULL
+#endif
+
+static struct platform_device_id samsung_usbphy_driver_ids[] = {
+	{
+		.name		= "s3c64xx-usbphy",
+		.driver_data	= TYPE_S3C64XX,
+	}, {
+		.name		= "exynos4210-usbphy",
+		.driver_data	= TYPE_EXYNOS4210,
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
+
+static struct platform_driver samsung_usbphy_driver = {
+	.probe		= samsung_usbphy_probe,
+	.remove		= __devexit_p(samsung_usbphy_remove),
+	.id_table	= samsung_usbphy_driver_ids,
+	.driver		= {
+		.name	= "samsung-usbphy",
+		.owner	= THIS_MODULE,
+		.of_match_table = samsung_usbphy_dt_match,
+	},
+};
+
+module_platform_driver(samsung_usbphy_driver);
+
+MODULE_DESCRIPTION("Samsung USB phy controller");
+MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-usbphy");
diff --git a/drivers/usb/phy/samsung-usbphy.h b/drivers/usb/phy/samsung-usbphy.h
new file mode 100644
index 0000000..093b1dc
--- /dev/null
+++ b/drivers/usb/phy/samsung-usbphy.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Author: Yulgon Kim <yulgon.kim@samsung.com>
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ * Author: Praveen Paneri <p.paneri@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __SAMSUNG_USBPHY_H
+#define __SAMSUNG_USBPHY_H
+
+#define S3C_PHYPWR				(0x00)
+
+#define S3C_PHYPWR_NORMAL_MASK			(0x19 << 0)
+#define S3C_PHYPWR_OTG_DISABLE			(1 << 4)
+#define S3C_PHYPWR_ANALOG_POWERDOWN		(1 << 3)
+#define S3C_PHYPWR_FORCE_SUSPEND		(1 << 1)
+/* For Exynos4 */
+#define EXYNOS4_PHYPWR_NORMAL_MASK		(0x39 << 0)
+#define EXYNOS4_PHYPWR_SLEEP			(1 << 5)
+
+#define S3C_PHYCLK				(0x04)
+
+#define S3C_PHYCLK_MODE_SERIAL			(1 << 6)
+#define S3C_PHYCLK_EXT_OSC			(1 << 5)
+#define S3C_PHYCLK_COMMON_ON_N			(1 << 4)
+#define S3C_PHYCLK_ID_PULL			(1 << 2)
+#define S3C_PHYCLK_CLKSEL_MASK			(0x3 << 0)
+#define S3C_PHYCLK_CLKSEL_SHIFT			(0)
+#define S3C_PHYCLK_CLKSEL_48M			(0x0 << 0)
+#define S3C_PHYCLK_CLKSEL_12M			(0x2 << 0)
+#define S3C_PHYCLK_CLKSEL_24M			(0x3 << 0)
+
+#define S3C_RSTCON				(0x08)
+
+#define S3C_RSTCON_PHYCLK			(1 << 2)
+#define S3C_RSTCON_HCLK				(1 << 1)
+#define S3C_RSTCON_PHY				(1 << 0)
+
+#ifndef MHZ
+#define MHZ (1000*1000)
+#endif
+
+#endif /* __SAMSUNG_USBPHY_H */
diff --git a/include/linux/platform_data/samsung-usbphy.h b/include/linux/platform_data/samsung-usbphy.h
new file mode 100644
index 0000000..1bd24cb
--- /dev/null
+++ b/include/linux/platform_data/samsung-usbphy.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *		http://www.samsung.com/
+ * Author: Praveen Paneri <p.paneri@samsung.com>
+ *
+ * Defines platform data for samsung usb phy driver.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __SAMSUNG_USBPHY_PLATFORM_H
+#define __SAMSUNG_USBPHY_PLATFORM_H
+
+/**
+ * samsung_usbphy_data - Platform data for USB PHY driver.
+ * @pmu_isolation: Function to control usb phy isolation in PMU.
+ */
+struct samsung_usbphy_data {
+	void (*pmu_isolation)(int on);
+};
+
+extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd);
+
+#endif /* __SAMSUNG_USBPHY_PLATFORM_H */
-- 
1.7.1

[PATCH v4 2/5] usb: s3c-hsotg: Adding phy driver support

[Praveen Paneri]

Adding the transceiver to hsotg driver. Keeping the platform data
for continuing the smooth operation for boards which still uses it

Signed-off-by: Praveen Paneri <p.paneri-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
 drivers/usb/gadget/s3c-hsotg.c |   37 +++++++++++++++++++++++++++----------
 1 files changed, 27 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index b13e0bb..60f6160 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -32,6 +32,7 @@
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
 #include <mach/map.h>
@@ -133,7 +134,9 @@ struct s3c_hsotg_ep {
  * struct s3c_hsotg - driver state.
  * @dev: The parent device supplied to the probe function
  * @driver: USB gadget driver
- * @plat: The platform specific configuration data.
+ * @phy: The otg phy transceiver structure for phy control.
+ * @plat: The platform specific configuration data. This can be removed once
+ * all SoCs support usb transceiver.
  * @regs: The memory area mapped for accessing registers.
  * @irq: The IRQ number we are using
  * @supplies: Definition of USB power supplies
@@ -153,6 +156,7 @@ struct s3c_hsotg_ep {
 struct s3c_hsotg {
 	struct device		 *dev;
 	struct usb_gadget_driver *driver;
+	struct usb_phy		*phy;
 	struct s3c_hsotg_plat	 *plat;
 
 	spinlock_t              lock;
@@ -2854,7 +2858,10 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg)
 	struct platform_device *pdev = to_platform_device(hsotg->dev);
 
 	dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev);
-	if (hsotg->plat->phy_init)
+
+	if (hsotg->phy)
+		usb_phy_init(hsotg->phy);
+	else if (hsotg->plat->phy_init)
 		hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
 }
 
@@ -2869,7 +2876,9 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg)
 {
 	struct platform_device *pdev = to_platform_device(hsotg->dev);
 
-	if (hsotg->plat->phy_exit)
+	if (hsotg->phy)
+		usb_phy_shutdown(hsotg->phy);
+	else if (hsotg->plat->phy_exit)
 		hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
 }
 
@@ -3493,6 +3502,7 @@ static void s3c_hsotg_release(struct device *dev)
 static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 {
 	struct s3c_hsotg_plat *plat = pdev->dev.platform_data;
+	struct usb_phy *phy;
 	struct device *dev = &pdev->dev;
 	struct s3c_hsotg_ep *eps;
 	struct s3c_hsotg *hsotg;
@@ -3501,20 +3511,27 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 	int ret;
 	int i;
 
-	plat = pdev->dev.platform_data;
-	if (!plat) {
-		dev_err(&pdev->dev, "no platform data defined\n");
-		return -EINVAL;
-	}
-
 	hsotg = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsotg), GFP_KERNEL);
 	if (!hsotg) {
 		dev_err(dev, "cannot get memory\n");
 		return -ENOMEM;
 	}
 
+	plat = pdev->dev.platform_data;
+	if (!plat) {
+		/* Fallback for transceiver */
+		phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+		if (IS_ERR_OR_NULL(phy)) {
+			dev_err(&pdev->dev, "no platform data or transceiver defined\n");
+			return -EPROBE_DEFER;
+		} else {
+			hsotg->phy = phy;
+		}
+	} else {
+		hsotg->plat = plat;
+	}
+
 	hsotg->dev = dev;
-	hsotg->plat = plat;
 
 	hsotg->clk = clk_get(&pdev->dev, "otg");
 	if (IS_ERR(hsotg->clk)) {
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 2/5] usb: s3c-hsotg: Adding phy driver support

[Praveen Paneri]

Adding the transceiver to hsotg driver. Keeping the platform data
for continuing the smooth operation for boards which still uses it

Signed-off-by: Praveen Paneri <p.paneri@samsung.com>
---
 drivers/usb/gadget/s3c-hsotg.c |   37 +++++++++++++++++++++++++++----------
 1 files changed, 27 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index b13e0bb..60f6160 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -32,6 +32,7 @@
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
 #include <mach/map.h>
@@ -133,7 +134,9 @@ struct s3c_hsotg_ep {
  * struct s3c_hsotg - driver state.
  * @dev: The parent device supplied to the probe function
  * @driver: USB gadget driver
- * @plat: The platform specific configuration data.
+ * @phy: The otg phy transceiver structure for phy control.
+ * @plat: The platform specific configuration data. This can be removed once
+ * all SoCs support usb transceiver.
  * @regs: The memory area mapped for accessing registers.
  * @irq: The IRQ number we are using
  * @supplies: Definition of USB power supplies
@@ -153,6 +156,7 @@ struct s3c_hsotg_ep {
 struct s3c_hsotg {
 	struct device		 *dev;
 	struct usb_gadget_driver *driver;
+	struct usb_phy		*phy;
 	struct s3c_hsotg_plat	 *plat;
 
 	spinlock_t              lock;
@@ -2854,7 +2858,10 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg)
 	struct platform_device *pdev = to_platform_device(hsotg->dev);
 
 	dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev);
-	if (hsotg->plat->phy_init)
+
+	if (hsotg->phy)
+		usb_phy_init(hsotg->phy);
+	else if (hsotg->plat->phy_init)
 		hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
 }
 
@@ -2869,7 +2876,9 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg)
 {
 	struct platform_device *pdev = to_platform_device(hsotg->dev);
 
-	if (hsotg->plat->phy_exit)
+	if (hsotg->phy)
+		usb_phy_shutdown(hsotg->phy);
+	else if (hsotg->plat->phy_exit)
 		hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
 }
 
@@ -3493,6 +3502,7 @@ static void s3c_hsotg_release(struct device *dev)
 static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 {
 	struct s3c_hsotg_plat *plat = pdev->dev.platform_data;
+	struct usb_phy *phy;
 	struct device *dev = &pdev->dev;
 	struct s3c_hsotg_ep *eps;
 	struct s3c_hsotg *hsotg;
@@ -3501,20 +3511,27 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 	int ret;
 	int i;
 
-	plat = pdev->dev.platform_data;
-	if (!plat) {
-		dev_err(&pdev->dev, "no platform data defined\n");
-		return -EINVAL;
-	}
-
 	hsotg = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsotg), GFP_KERNEL);
 	if (!hsotg) {
 		dev_err(dev, "cannot get memory\n");
 		return -ENOMEM;
 	}
 
+	plat = pdev->dev.platform_data;
+	if (!plat) {
+		/* Fallback for transceiver */
+		phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+		if (IS_ERR_OR_NULL(phy)) {
+			dev_err(&pdev->dev, "no platform data or transceiver defined\n");
+			return -EPROBE_DEFER;
+		} else {
+			hsotg->phy = phy;
+		}
+	} else {
+		hsotg->plat = plat;
+	}
+
 	hsotg->dev = dev;
-	hsotg->plat = plat;
 
 	hsotg->clk = clk_get(&pdev->dev, "otg");
 	if (IS_ERR(hsotg->clk)) {
-- 
1.7.1

[PATCH v4 3/5] ARM: S3C64XX: Removing old phy setup code

[Praveen Paneri]

This patch removes old phy code from platform side. 'setup-usb-phy.c'
will be used for providing transceiver platform data in next
patch. Not all of the platform data code is removed as there are others
making use of platform_data defined for hsotg. That can be removed once
all the SoCs start using the new transceiver for usb phy setup.

Signed-off-by: Praveen Paneri <p.paneri@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-crag6410.c |    3 -
 arch/arm/mach-s3c64xx/mach-smartq.c   |    3 -
 arch/arm/mach-s3c64xx/mach-smdk6410.c |    3 -
 arch/arm/mach-s3c64xx/setup-usb-phy.c |   79 ---------------------------------
 4 files changed, 0 insertions(+), 88 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 09cd812..b0f5baf 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -31,7 +31,6 @@
 #include <linux/spi/spi.h>
 
 #include <linux/i2c/pca953x.h>
-#include <linux/platform_data/s3c-hsotg.h>
 
 #include <video/platform_lcd.h>
 
@@ -766,7 +765,6 @@ static const struct gpio_led_platform_data gpio_leds_pdata = {
 	.num_leds = ARRAY_SIZE(gpio_leds),
 };
 
-static struct s3c_hsotg_plat crag6410_hsotg_pdata;
 
 static void __init crag6410_machine_init(void)
 {
@@ -792,7 +790,6 @@ static void __init crag6410_machine_init(void)
 	s3c_i2c0_set_platdata(&i2c0_pdata);
 	s3c_i2c1_set_platdata(&i2c1_pdata);
 	s3c_fb_set_platdata(&crag6410_lcd_pdata);
-	s3c_hsotg_set_platdata(&crag6410_hsotg_pdata);
 
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index ceeb1de..7400da1 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -18,7 +18,6 @@
 #include <linux/serial_core.h>
 #include <linux/spi/spi_gpio.h>
 #include <linux/usb/gpio_vbus.h>
-#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -187,7 +186,6 @@ static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
 	},
 };
 
-static struct s3c_hsotg_plat smartq_hsotg_pdata;
 
 static int __init smartq_lcd_setup_gpio(void)
 {
@@ -385,7 +383,6 @@ void __init smartq_map_io(void)
 void __init smartq_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
-	s3c_hsotg_set_platdata(&smartq_hsotg_pdata);
 	s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
 	s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
 	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 0fe4f15..cbdc91b 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -30,7 +30,6 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/pwm_backlight.h>
-#include <linux/platform_data/s3c-hsotg.h>
 
 #ifdef CONFIG_SMDK6410_WM1190_EV1
 #include <linux/mfd/wm8350/core.h>
@@ -627,7 +626,6 @@ static struct platform_pwm_backlight_data smdk6410_bl_data = {
 	.pwm_id = 1,
 };
 
-static struct s3c_hsotg_plat smdk6410_hsotg_pdata;
 
 static void __init smdk6410_map_io(void)
 {
@@ -657,7 +655,6 @@ static void __init smdk6410_machine_init(void)
 	s3c_i2c0_set_platdata(NULL);
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
-	s3c_hsotg_set_platdata(&smdk6410_hsotg_pdata);
 
 	samsung_keypad_set_platdata(&smdk6410_keypad_data);
 
diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c
index f6757e0..7a09553 100644
--- a/arch/arm/mach-s3c64xx/setup-usb-phy.c
+++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c
@@ -9,82 +9,3 @@
  *
  */
 
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <mach/map.h>
-#include <mach/regs-sys.h>
-#include <plat/cpu.h>
-#include <plat/regs-usb-hsotg-phy.h>
-#include <plat/usb-phy.h>
-
-static int s3c_usb_otgphy_init(struct platform_device *pdev)
-{
-	struct clk *xusbxti;
-	u32 phyclk;
-
-	writel(readl(S3C64XX_OTHERS) | S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
-
-	/* set clock frequency for PLL */
-	phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
-
-	xusbxti = clk_get(&pdev->dev, "xusbxti");
-	if (xusbxti && !IS_ERR(xusbxti)) {
-		switch (clk_get_rate(xusbxti)) {
-		case 12 * MHZ:
-			phyclk |= S3C_PHYCLK_CLKSEL_12M;
-			break;
-		case 24 * MHZ:
-			phyclk |= S3C_PHYCLK_CLKSEL_24M;
-			break;
-		default:
-		case 48 * MHZ:
-			/* default reference clock */
-			break;
-		}
-		clk_put(xusbxti);
-	}
-
-	/* TODO: select external clock/oscillator */
-	writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK);
-
-	/* set to normal OTG PHY */
-	writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR);
-	mdelay(1);
-
-	/* reset OTG PHY and Link */
-	writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK,
-			S3C_RSTCON);
-	udelay(20);	/* at-least 10uS */
-	writel(0, S3C_RSTCON);
-
-	return 0;
-}
-
-static int s3c_usb_otgphy_exit(struct platform_device *pdev)
-{
-	writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN |
-				S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR);
-
-	writel(readl(S3C64XX_OTHERS) & ~S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
-
-	return 0;
-}
-
-int s5p_usb_phy_init(struct platform_device *pdev, int type)
-{
-	if (type == S5P_USB_PHY_DEVICE)
-		return s3c_usb_otgphy_init(pdev);
-
-	return -EINVAL;
-}
-
-int s5p_usb_phy_exit(struct platform_device *pdev, int type)
-{
-	if (type == S5P_USB_PHY_DEVICE)
-		return s3c_usb_otgphy_exit(pdev);
-
-	return -EINVAL;
-}
-- 
1.7.1

[PATCH v4 3/5] ARM: S3C64XX: Removing old phy setup code

[Praveen Paneri]

This patch removes old phy code from platform side. 'setup-usb-phy.c'
will be used for providing transceiver platform data in next
patch. Not all of the platform data code is removed as there are others
making use of platform_data defined for hsotg. That can be removed once
all the SoCs start using the new transceiver for usb phy setup.

Signed-off-by: Praveen Paneri <p.paneri@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-crag6410.c |    3 -
 arch/arm/mach-s3c64xx/mach-smartq.c   |    3 -
 arch/arm/mach-s3c64xx/mach-smdk6410.c |    3 -
 arch/arm/mach-s3c64xx/setup-usb-phy.c |   79 ---------------------------------
 4 files changed, 0 insertions(+), 88 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 09cd812..b0f5baf 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -31,7 +31,6 @@
 #include <linux/spi/spi.h>
 
 #include <linux/i2c/pca953x.h>
-#include <linux/platform_data/s3c-hsotg.h>
 
 #include <video/platform_lcd.h>
 
@@ -766,7 +765,6 @@ static const struct gpio_led_platform_data gpio_leds_pdata = {
 	.num_leds = ARRAY_SIZE(gpio_leds),
 };
 
-static struct s3c_hsotg_plat crag6410_hsotg_pdata;
 
 static void __init crag6410_machine_init(void)
 {
@@ -792,7 +790,6 @@ static void __init crag6410_machine_init(void)
 	s3c_i2c0_set_platdata(&i2c0_pdata);
 	s3c_i2c1_set_platdata(&i2c1_pdata);
 	s3c_fb_set_platdata(&crag6410_lcd_pdata);
-	s3c_hsotg_set_platdata(&crag6410_hsotg_pdata);
 
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index ceeb1de..7400da1 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -18,7 +18,6 @@
 #include <linux/serial_core.h>
 #include <linux/spi/spi_gpio.h>
 #include <linux/usb/gpio_vbus.h>
-#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -187,7 +186,6 @@ static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
 	},
 };
 
-static struct s3c_hsotg_plat smartq_hsotg_pdata;
 
 static int __init smartq_lcd_setup_gpio(void)
 {
@@ -385,7 +383,6 @@ void __init smartq_map_io(void)
 void __init smartq_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
-	s3c_hsotg_set_platdata(&smartq_hsotg_pdata);
 	s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
 	s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
 	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 0fe4f15..cbdc91b 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -30,7 +30,6 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/pwm_backlight.h>
-#include <linux/platform_data/s3c-hsotg.h>
 
 #ifdef CONFIG_SMDK6410_WM1190_EV1
 #include <linux/mfd/wm8350/core.h>
@@ -627,7 +626,6 @@ static struct platform_pwm_backlight_data smdk6410_bl_data = {
 	.pwm_id = 1,
 };
 
-static struct s3c_hsotg_plat smdk6410_hsotg_pdata;
 
 static void __init smdk6410_map_io(void)
 {
@@ -657,7 +655,6 @@ static void __init smdk6410_machine_init(void)
 	s3c_i2c0_set_platdata(NULL);
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
-	s3c_hsotg_set_platdata(&smdk6410_hsotg_pdata);
 
 	samsung_keypad_set_platdata(&smdk6410_keypad_data);
 
diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c
index f6757e0..7a09553 100644
--- a/arch/arm/mach-s3c64xx/setup-usb-phy.c
+++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c
@@ -9,82 +9,3 @@
  *
  */
 
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <mach/map.h>
-#include <mach/regs-sys.h>
-#include <plat/cpu.h>
-#include <plat/regs-usb-hsotg-phy.h>
-#include <plat/usb-phy.h>
-
-static int s3c_usb_otgphy_init(struct platform_device *pdev)
-{
-	struct clk *xusbxti;
-	u32 phyclk;
-
-	writel(readl(S3C64XX_OTHERS) | S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
-
-	/* set clock frequency for PLL */
-	phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
-
-	xusbxti = clk_get(&pdev->dev, "xusbxti");
-	if (xusbxti && !IS_ERR(xusbxti)) {
-		switch (clk_get_rate(xusbxti)) {
-		case 12 * MHZ:
-			phyclk |= S3C_PHYCLK_CLKSEL_12M;
-			break;
-		case 24 * MHZ:
-			phyclk |= S3C_PHYCLK_CLKSEL_24M;
-			break;
-		default:
-		case 48 * MHZ:
-			/* default reference clock */
-			break;
-		}
-		clk_put(xusbxti);
-	}
-
-	/* TODO: select external clock/oscillator */
-	writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK);
-
-	/* set to normal OTG PHY */
-	writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR);
-	mdelay(1);
-
-	/* reset OTG PHY and Link */
-	writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK,
-			S3C_RSTCON);
-	udelay(20);	/* at-least 10uS */
-	writel(0, S3C_RSTCON);
-
-	return 0;
-}
-
-static int s3c_usb_otgphy_exit(struct platform_device *pdev)
-{
-	writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN |
-				S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR);
-
-	writel(readl(S3C64XX_OTHERS) & ~S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
-
-	return 0;
-}
-
-int s5p_usb_phy_init(struct platform_device *pdev, int type)
-{
-	if (type == S5P_USB_PHY_DEVICE)
-		return s3c_usb_otgphy_init(pdev);
-
-	return -EINVAL;
-}
-
-int s5p_usb_phy_exit(struct platform_device *pdev, int type)
-{
-	if (type == S5P_USB_PHY_DEVICE)
-		return s3c_usb_otgphy_exit(pdev);
-
-	return -EINVAL;
-}
-- 
1.7.1

[PATCH v4 4/5] ARM: S3C64XX: Enabling samsung-usbphy driver

[Praveen Paneri]

Adding platform device for samsung-usbphy driver. Enabling it for
s3c64xx based machines using s3c-hsotg.

Signed-off-by: Praveen Paneri <p.paneri-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
 arch/arm/mach-s3c64xx/include/mach/map.h     |    2 +
 arch/arm/mach-s3c64xx/mach-crag6410.c        |    4 +++
 arch/arm/mach-s3c64xx/mach-smartq.c          |    5 ++++
 arch/arm/mach-s3c64xx/mach-smdk6410.c        |    4 +++
 arch/arm/mach-s3c64xx/setup-usb-phy.c        |   14 +++++++++++
 arch/arm/plat-samsung/devs.c                 |   33 ++++++++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/devs.h    |    1 +
 arch/arm/plat-samsung/include/plat/usb-phy.h |    1 +
 8 files changed, 64 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index 8e2097b..dc482bb 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -65,6 +65,7 @@
 
 #define S3C64XX_PA_NAND		(0x70200000)
 #define S3C64XX_PA_FB		(0x77100000)
+#define S3C64XX_PA_USB_HSPHY	(0x7C100000)
 #define S3C64XX_PA_USB_HSOTG	(0x7C000000)
 #define S3C64XX_PA_WATCHDOG	(0x7E004000)
 #define S3C64XX_PA_RTC		(0x7E005000)
@@ -113,6 +114,7 @@
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
+#define S3C_PA_USB_PHY		S3C64XX_PA_USB_HSPHY
 #define S3C_PA_RTC		S3C64XX_PA_RTC
 #define S3C_PA_WDT		S3C64XX_PA_WATCHDOG
 #define S3C_PA_SPI0		S3C64XX_PA_SPI0
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index b0f5baf..a9c3b5e 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -31,6 +31,7 @@
 #include <linux/spi/spi.h>
 
 #include <linux/i2c/pca953x.h>
+#include <linux/platform_data/samsung-usbphy.h>
 
 #include <video/platform_lcd.h>
 
@@ -336,6 +337,7 @@ static struct platform_device wallvdd_device = {
 };
 
 static struct platform_device *crag6410_devices[] __initdata = {
+	&samsung_device_usbphy,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc2,
 	&s3c_device_i2c0,
@@ -765,6 +767,7 @@ static const struct gpio_led_platform_data gpio_leds_pdata = {
 	.num_leds = ARRAY_SIZE(gpio_leds),
 };
 
+static struct samsung_usbphy_data crag6410_usbphy_pdata;
 
 static void __init crag6410_machine_init(void)
 {
@@ -790,6 +793,7 @@ static void __init crag6410_machine_init(void)
 	s3c_i2c0_set_platdata(&i2c0_pdata);
 	s3c_i2c1_set_platdata(&i2c1_pdata);
 	s3c_fb_set_platdata(&crag6410_lcd_pdata);
+	samsung_usbphy_set_pdata(&crag6410_usbphy_pdata);
 
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 7400da1..0e75c36 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -18,6 +18,7 @@
 #include <linux/serial_core.h>
 #include <linux/spi/spi_gpio.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/platform_data/samsung-usbphy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -234,6 +235,7 @@ static struct i2c_board_info smartq_i2c_devs[] __initdata = {
 };
 
 static struct platform_device *smartq_devices[] __initdata = {
+	&samsung_device_usbphy,
 	&s3c_device_hsmmc1,	/* Init iNAND first, ... */
 	&s3c_device_hsmmc0,	/* ... then the external SD card */
 	&s3c_device_hsmmc2,
@@ -380,9 +382,12 @@ void __init smartq_map_io(void)
 	smartq_lcd_mode_set();
 }
 
+static struct samsung_usbphy_data smartq_usbphy_pdata;
+
 void __init smartq_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+	samsung_usbphy_set_pdata(&smartq_usbphy_pdata);
 	s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
 	s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
 	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index cbdc91b..6c2ee6d 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -30,6 +30,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/pwm_backlight.h>
+#include <linux/platform_data/samsung-usbphy.h>
 
 #ifdef CONFIG_SMDK6410_WM1190_EV1
 #include <linux/mfd/wm8350/core.h>
@@ -263,6 +264,7 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
+	&samsung_device_usbphy,
 #ifdef CONFIG_SMDK6410_SD_CH0
 	&s3c_device_hsmmc0,
 #endif
@@ -626,6 +628,7 @@ static struct platform_pwm_backlight_data smdk6410_bl_data = {
 	.pwm_id = 1,
 };
 
+static struct samsung_usbphy_data smdk6410_usbphy_pdata;
 
 static void __init smdk6410_map_io(void)
 {
@@ -655,6 +658,7 @@ static void __init smdk6410_machine_init(void)
 	s3c_i2c0_set_platdata(NULL);
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+	samsung_usbphy_set_pdata(&smdk6410_usbphy_pdata);
 
 	samsung_keypad_set_platdata(&smdk6410_keypad_data);
 
diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c
index 7a09553..3aee778 100644
--- a/arch/arm/mach-s3c64xx/setup-usb-phy.c
+++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c
@@ -9,3 +9,17 @@
  *
  */
 
+#include <linux/io.h>
+#include <mach/map.h>
+#include <mach/regs-sys.h>
+
+void s5p_usb_phy_pmu_isolation(int on)
+{
+	if (on) {
+		writel(readl(S3C64XX_OTHERS) & ~S3C64XX_OTHERS_USBMASK,
+			S3C64XX_OTHERS);
+	} else {
+		writel(readl(S3C64XX_OTHERS) | S3C64XX_OTHERS_USBMASK,
+			S3C64XX_OTHERS);
+	}
+}
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 74e31ce..9a796cb 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -31,6 +31,7 @@
 #include <linux/ioport.h>
 #include <linux/platform_data/s3c-hsudc.h>
 #include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/samsung-usbphy.h>
 
 #include <asm/irq.h>
 #include <asm/pmu.h>
@@ -1343,6 +1344,35 @@ struct platform_device s5p_device_mixer = {
 
 /* USB */
 
+#ifdef CONFIG_S3C_DEV_USB_HSOTG
+/* USB PHY*/
+static struct resource samsung_usbphy_resource[] = {
+	[0] = {
+		.start = S3C_PA_USB_PHY,
+		.end   = S3C_PA_USB_PHY + SZ_16 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device samsung_device_usbphy = {
+	.name		= "s3c64xx-usbphy",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(samsung_usbphy_resource),
+	.resource	= samsung_usbphy_resource,
+};
+
+void __init samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd)
+{
+	struct samsung_usbphy_data *npd;
+
+	npd = s3c_set_platdata(pd, sizeof(struct samsung_usbphy_data),
+			&samsung_device_usbphy);
+
+	if (!npd->pmu_isolation)
+		npd->pmu_isolation = s5p_usb_phy_pmu_isolation;
+}
+#endif
+
 #ifdef CONFIG_S3C_DEV_USB_HOST
 static struct resource s3c_usb_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C_PA_USBHOST, SZ_256),
@@ -1449,6 +1479,8 @@ struct platform_device s3c_device_usb_hsotg = {
 	},
 };
 
+#ifndef CONFIG_ARCH_S3C64XX
+/* TODO: To be removed later. Currently only S3C64XX is platform data free */
 void __init s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd)
 {
 	struct s3c_hsotg_plat *npd;
@@ -1461,6 +1493,7 @@ void __init s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd)
 	if (!npd->phy_exit)
 		npd->phy_exit = s5p_usb_phy_exit;
 }
+#endif
 #endif /* CONFIG_S3C_DEV_USB_HSOTG */
 
 /* USB High Spped 2.0 Device (Gadget) */
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 5da4b4f..3849c88 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -138,6 +138,7 @@ extern struct platform_device exynos_device_drm;
 extern struct platform_device samsung_asoc_dma;
 extern struct platform_device samsung_asoc_idma;
 extern struct platform_device samsung_device_keypad;
+extern struct platform_device samsung_device_usbphy;
 
 /* s3c2440 specific devices */
 
diff --git a/arch/arm/plat-samsung/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h
index 959bcdb..165ffe7 100644
--- a/arch/arm/plat-samsung/include/plat/usb-phy.h
+++ b/arch/arm/plat-samsung/include/plat/usb-phy.h
@@ -18,5 +18,6 @@ enum s5p_usb_phy_type {
 
 extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
 extern int s5p_usb_phy_exit(struct platform_device *pdev, int type);
+extern void s5p_usb_phy_pmu_isolation(int on);
 
 #endif /* __PLAT_SAMSUNG_USB_PHY_H */
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 4/5] ARM: S3C64XX: Enabling samsung-usbphy driver

[Praveen Paneri]

Adding platform device for samsung-usbphy driver. Enabling it for
s3c64xx based machines using s3c-hsotg.

Signed-off-by: Praveen Paneri <p.paneri@samsung.com>
---
 arch/arm/mach-s3c64xx/include/mach/map.h     |    2 +
 arch/arm/mach-s3c64xx/mach-crag6410.c        |    4 +++
 arch/arm/mach-s3c64xx/mach-smartq.c          |    5 ++++
 arch/arm/mach-s3c64xx/mach-smdk6410.c        |    4 +++
 arch/arm/mach-s3c64xx/setup-usb-phy.c        |   14 +++++++++++
 arch/arm/plat-samsung/devs.c                 |   33 ++++++++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/devs.h    |    1 +
 arch/arm/plat-samsung/include/plat/usb-phy.h |    1 +
 8 files changed, 64 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index 8e2097b..dc482bb 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -65,6 +65,7 @@
 
 #define S3C64XX_PA_NAND		(0x70200000)
 #define S3C64XX_PA_FB		(0x77100000)
+#define S3C64XX_PA_USB_HSPHY	(0x7C100000)
 #define S3C64XX_PA_USB_HSOTG	(0x7C000000)
 #define S3C64XX_PA_WATCHDOG	(0x7E004000)
 #define S3C64XX_PA_RTC		(0x7E005000)
@@ -113,6 +114,7 @@
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
+#define S3C_PA_USB_PHY		S3C64XX_PA_USB_HSPHY
 #define S3C_PA_RTC		S3C64XX_PA_RTC
 #define S3C_PA_WDT		S3C64XX_PA_WATCHDOG
 #define S3C_PA_SPI0		S3C64XX_PA_SPI0
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index b0f5baf..a9c3b5e 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -31,6 +31,7 @@
 #include <linux/spi/spi.h>
 
 #include <linux/i2c/pca953x.h>
+#include <linux/platform_data/samsung-usbphy.h>
 
 #include <video/platform_lcd.h>
 
@@ -336,6 +337,7 @@ static struct platform_device wallvdd_device = {
 };
 
 static struct platform_device *crag6410_devices[] __initdata = {
+	&samsung_device_usbphy,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc2,
 	&s3c_device_i2c0,
@@ -765,6 +767,7 @@ static const struct gpio_led_platform_data gpio_leds_pdata = {
 	.num_leds = ARRAY_SIZE(gpio_leds),
 };
 
+static struct samsung_usbphy_data crag6410_usbphy_pdata;
 
 static void __init crag6410_machine_init(void)
 {
@@ -790,6 +793,7 @@ static void __init crag6410_machine_init(void)
 	s3c_i2c0_set_platdata(&i2c0_pdata);
 	s3c_i2c1_set_platdata(&i2c1_pdata);
 	s3c_fb_set_platdata(&crag6410_lcd_pdata);
+	samsung_usbphy_set_pdata(&crag6410_usbphy_pdata);
 
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 7400da1..0e75c36 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -18,6 +18,7 @@
 #include <linux/serial_core.h>
 #include <linux/spi/spi_gpio.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/platform_data/samsung-usbphy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -234,6 +235,7 @@ static struct i2c_board_info smartq_i2c_devs[] __initdata = {
 };
 
 static struct platform_device *smartq_devices[] __initdata = {
+	&samsung_device_usbphy,
 	&s3c_device_hsmmc1,	/* Init iNAND first, ... */
 	&s3c_device_hsmmc0,	/* ... then the external SD card */
 	&s3c_device_hsmmc2,
@@ -380,9 +382,12 @@ void __init smartq_map_io(void)
 	smartq_lcd_mode_set();
 }
 
+static struct samsung_usbphy_data smartq_usbphy_pdata;
+
 void __init smartq_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+	samsung_usbphy_set_pdata(&smartq_usbphy_pdata);
 	s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
 	s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
 	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index cbdc91b..6c2ee6d 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -30,6 +30,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/pwm_backlight.h>
+#include <linux/platform_data/samsung-usbphy.h>
 
 #ifdef CONFIG_SMDK6410_WM1190_EV1
 #include <linux/mfd/wm8350/core.h>
@@ -263,6 +264,7 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
+	&samsung_device_usbphy,
 #ifdef CONFIG_SMDK6410_SD_CH0
 	&s3c_device_hsmmc0,
 #endif
@@ -626,6 +628,7 @@ static struct platform_pwm_backlight_data smdk6410_bl_data = {
 	.pwm_id = 1,
 };
 
+static struct samsung_usbphy_data smdk6410_usbphy_pdata;
 
 static void __init smdk6410_map_io(void)
 {
@@ -655,6 +658,7 @@ static void __init smdk6410_machine_init(void)
 	s3c_i2c0_set_platdata(NULL);
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+	samsung_usbphy_set_pdata(&smdk6410_usbphy_pdata);
 
 	samsung_keypad_set_platdata(&smdk6410_keypad_data);
 
diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c
index 7a09553..3aee778 100644
--- a/arch/arm/mach-s3c64xx/setup-usb-phy.c
+++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c
@@ -9,3 +9,17 @@
  *
  */
 
+#include <linux/io.h>
+#include <mach/map.h>
+#include <mach/regs-sys.h>
+
+void s5p_usb_phy_pmu_isolation(int on)
+{
+	if (on) {
+		writel(readl(S3C64XX_OTHERS) & ~S3C64XX_OTHERS_USBMASK,
+			S3C64XX_OTHERS);
+	} else {
+		writel(readl(S3C64XX_OTHERS) | S3C64XX_OTHERS_USBMASK,
+			S3C64XX_OTHERS);
+	}
+}
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 74e31ce..9a796cb 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -31,6 +31,7 @@
 #include <linux/ioport.h>
 #include <linux/platform_data/s3c-hsudc.h>
 #include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/samsung-usbphy.h>
 
 #include <asm/irq.h>
 #include <asm/pmu.h>
@@ -1343,6 +1344,35 @@ struct platform_device s5p_device_mixer = {
 
 /* USB */
 
+#ifdef CONFIG_S3C_DEV_USB_HSOTG
+/* USB PHY*/
+static struct resource samsung_usbphy_resource[] = {
+	[0] = {
+		.start = S3C_PA_USB_PHY,
+		.end   = S3C_PA_USB_PHY + SZ_16 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device samsung_device_usbphy = {
+	.name		= "s3c64xx-usbphy",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(samsung_usbphy_resource),
+	.resource	= samsung_usbphy_resource,
+};
+
+void __init samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd)
+{
+	struct samsung_usbphy_data *npd;
+
+	npd = s3c_set_platdata(pd, sizeof(struct samsung_usbphy_data),
+			&samsung_device_usbphy);
+
+	if (!npd->pmu_isolation)
+		npd->pmu_isolation = s5p_usb_phy_pmu_isolation;
+}
+#endif
+
 #ifdef CONFIG_S3C_DEV_USB_HOST
 static struct resource s3c_usb_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C_PA_USBHOST, SZ_256),
@@ -1449,6 +1479,8 @@ struct platform_device s3c_device_usb_hsotg = {
 	},
 };
 
+#ifndef CONFIG_ARCH_S3C64XX
+/* TODO: To be removed later. Currently only S3C64XX is platform data free */
 void __init s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd)
 {
 	struct s3c_hsotg_plat *npd;
@@ -1461,6 +1493,7 @@ void __init s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd)
 	if (!npd->phy_exit)
 		npd->phy_exit = s5p_usb_phy_exit;
 }
+#endif
 #endif /* CONFIG_S3C_DEV_USB_HSOTG */
 
 /* USB High Spped 2.0 Device (Gadget) */
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 5da4b4f..3849c88 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -138,6 +138,7 @@ extern struct platform_device exynos_device_drm;
 extern struct platform_device samsung_asoc_dma;
 extern struct platform_device samsung_asoc_idma;
 extern struct platform_device samsung_device_keypad;
+extern struct platform_device samsung_device_usbphy;
 
 /* s3c2440 specific devices */
 
diff --git a/arch/arm/plat-samsung/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h
index 959bcdb..165ffe7 100644
--- a/arch/arm/plat-samsung/include/plat/usb-phy.h
+++ b/arch/arm/plat-samsung/include/plat/usb-phy.h
@@ -18,5 +18,6 @@ enum s5p_usb_phy_type {
 
 extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
 extern int s5p_usb_phy_exit(struct platform_device *pdev, int type);
+extern void s5p_usb_phy_pmu_isolation(int on);
 
 #endif /* __PLAT_SAMSUNG_USB_PHY_H */
-- 
1.7.1

[PATCH v4 5/5] ARM: Exynos4210: Enabling samsung-usbphy driver

[Praveen Paneri]

Adding usbphy node for Exynos4210 along with the platform data.

Signed-off-by: Praveen Paneri <p.paneri-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
 arch/arm/boot/dts/exynos4210.dtsi       |    5 +++++
 arch/arm/mach-exynos/include/mach/map.h |    1 +
 arch/arm/mach-exynos/mach-exynos4-dt.c  |    8 ++++++++
 arch/arm/mach-exynos/setup-usb-phy.c    |   13 +++++++++++++
 4 files changed, 27 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 02891fe..e28cf10 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -62,6 +62,11 @@
 		interrupts = <0 44 0>, <0 45 0>;
 	};
 
+	usbphy@125B0000 {
+		compatible = "samsung,exynos4210-usbphy";
+		reg = <0x125B0000 0x100>;
+	};
+
 	keypad@100A0000 {
 		compatible = "samsung,s5pv210-keypad";
 		reg = <0x100A0000 0x100>;
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index c72b675..0625c0a 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -234,6 +234,7 @@
 #define S3C_PA_SPI1			EXYNOS4_PA_SPI1
 #define S3C_PA_SPI2			EXYNOS4_PA_SPI2
 #define S3C_PA_USB_HSOTG		EXYNOS4_PA_HSOTG
+#define S3C_PA_USB_PHY			EXYNOS4_PA_HSPHY
 
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 #define S5P_PA_FIMC0			EXYNOS4_PA_FIMC0
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index b2b5d5f..0739be8 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -13,6 +13,7 @@
 
 #include <linux/of_platform.h>
 #include <linux/serial_core.h>
+#include <linux/platform_data/samsung-usbphy.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -20,9 +21,14 @@
 
 #include <plat/cpu.h>
 #include <plat/regs-serial.h>
+#include <plat/usb-phy.h>
 
 #include "common.h"
 
+static struct samsung_usbphy_data exynos4_usbphy_pdata = {
+	.pmu_isolation = s5p_usb_phy_pmu_isolation,
+};
+
 /*
  * The following lookup table is used to override device names when devices
  * are registered from device tree. This is temporarily added to enable
@@ -63,6 +69,8 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
 				"exynos4210-spi.2", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-usbphy", EXYNOS4_PA_HSPHY,
+			"s3c-usbphy", &exynos4_usbphy_pdata),
 	{},
 };
 
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c
index b81cc56..1c62d20 100644
--- a/arch/arm/mach-exynos/setup-usb-phy.c
+++ b/arch/arm/mach-exynos/setup-usb-phy.c
@@ -221,3 +221,16 @@ int s5p_usb_phy_exit(struct platform_device *pdev, int type)
 
 	return -EINVAL;
 }
+
+void s5p_usb_phy_pmu_isolation(int on)
+{
+	if (on) {
+		writel(readl(S5P_USBDEVICE_PHY_CONTROL)
+			& ~S5P_USBDEVICE_PHY_ENABLE,
+				S5P_USBDEVICE_PHY_CONTROL);
+	} else {
+		writel(readl(S5P_USBDEVICE_PHY_CONTROL)
+			| S5P_USBDEVICE_PHY_ENABLE,
+				S5P_USBDEVICE_PHY_CONTROL);
+	}
+}
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 5/5] ARM: Exynos4210: Enabling samsung-usbphy driver

[Praveen Paneri]

Adding usbphy node for Exynos4210 along with the platform data.

Signed-off-by: Praveen Paneri <p.paneri@samsung.com>
---
 arch/arm/boot/dts/exynos4210.dtsi       |    5 +++++
 arch/arm/mach-exynos/include/mach/map.h |    1 +
 arch/arm/mach-exynos/mach-exynos4-dt.c  |    8 ++++++++
 arch/arm/mach-exynos/setup-usb-phy.c    |   13 +++++++++++++
 4 files changed, 27 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 02891fe..e28cf10 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -62,6 +62,11 @@
 		interrupts = <0 44 0>, <0 45 0>;
 	};
 
+	usbphy at 125B0000 {
+		compatible = "samsung,exynos4210-usbphy";
+		reg = <0x125B0000 0x100>;
+	};
+
 	keypad at 100A0000 {
 		compatible = "samsung,s5pv210-keypad";
 		reg = <0x100A0000 0x100>;
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index c72b675..0625c0a 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -234,6 +234,7 @@
 #define S3C_PA_SPI1			EXYNOS4_PA_SPI1
 #define S3C_PA_SPI2			EXYNOS4_PA_SPI2
 #define S3C_PA_USB_HSOTG		EXYNOS4_PA_HSOTG
+#define S3C_PA_USB_PHY			EXYNOS4_PA_HSPHY
 
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 #define S5P_PA_FIMC0			EXYNOS4_PA_FIMC0
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index b2b5d5f..0739be8 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -13,6 +13,7 @@
 
 #include <linux/of_platform.h>
 #include <linux/serial_core.h>
+#include <linux/platform_data/samsung-usbphy.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -20,9 +21,14 @@
 
 #include <plat/cpu.h>
 #include <plat/regs-serial.h>
+#include <plat/usb-phy.h>
 
 #include "common.h"
 
+static struct samsung_usbphy_data exynos4_usbphy_pdata = {
+	.pmu_isolation = s5p_usb_phy_pmu_isolation,
+};
+
 /*
  * The following lookup table is used to override device names when devices
  * are registered from device tree. This is temporarily added to enable
@@ -63,6 +69,8 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
 				"exynos4210-spi.2", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-usbphy", EXYNOS4_PA_HSPHY,
+			"s3c-usbphy", &exynos4_usbphy_pdata),
 	{},
 };
 
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c
index b81cc56..1c62d20 100644
--- a/arch/arm/mach-exynos/setup-usb-phy.c
+++ b/arch/arm/mach-exynos/setup-usb-phy.c
@@ -221,3 +221,16 @@ int s5p_usb_phy_exit(struct platform_device *pdev, int type)
 
 	return -EINVAL;
 }
+
+void s5p_usb_phy_pmu_isolation(int on)
+{
+	if (on) {
+		writel(readl(S5P_USBDEVICE_PHY_CONTROL)
+			& ~S5P_USBDEVICE_PHY_ENABLE,
+				S5P_USBDEVICE_PHY_CONTROL);
+	} else {
+		writel(readl(S5P_USBDEVICE_PHY_CONTROL)
+			| S5P_USBDEVICE_PHY_ENABLE,
+				S5P_USBDEVICE_PHY_CONTROL);
+	}
+}
-- 
1.7.1

Re: [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg

[Praveen Paneri]

On Fri, Aug 10, 2012 at 12:34 PM, Felipe Balbi <balbi@ti.com> wrote:
> Hi,
>
> On Fri, Aug 10, 2012 at 12:40:27PM +0530, Praveen Paneri wrote:
>> This driver uses usb_phy interface to interact with s3c-hsotg. Supports
>> phy_init and phy_shutdown functions to enable/disable phy. Tested with
>> smdk6410 and smdkv310. More SoCs can be brought under later.
>>
>> Signed-off-by: Praveen Paneri <p.paneri@samsung.com>
>> Acked-by: Heiko Stuebner <heiko@sntech.de>
>
> this looks good. Just 2 comments below.
>
>> ---
>>  .../devicetree/bindings/usb/samsung-usbphy.txt     |    9 +
>>  drivers/usb/phy/Kconfig                            |    8 +
>>  drivers/usb/phy/Makefile                           |    1 +
>>  drivers/usb/phy/samsung-usbphy.c                   |  345 ++++++++++++++++++++
>>  drivers/usb/phy/samsung-usbphy.h                   |   48 +++
>>  include/linux/platform_data/samsung-usbphy.h       |   27 ++
>>  6 files changed, 438 insertions(+), 0 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>>  create mode 100644 drivers/usb/phy/samsung-usbphy.c
>>  create mode 100644 drivers/usb/phy/samsung-usbphy.h
>>  create mode 100644 include/linux/platform_data/samsung-usbphy.h
>>
>> diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>> new file mode 100644
>> index 0000000..fefd9c8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>> @@ -0,0 +1,9 @@
>> +* Samsung's usb phy transceiver
>> +
>> +The Samsung's phy transceiver is used for controlling usb otg phy for
>> +s3c-hsotg usb device controller.
>> +
>> +Required properties:
>> +- compatible : should be "samsung,exynos4210-usbphy"
>> +- reg : base physical address of the phy registers and length of memory mapped
>> +     region.
>> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
>> index e7cf84f..d916477 100644
>> --- a/drivers/usb/phy/Kconfig
>> +++ b/drivers/usb/phy/Kconfig
>> @@ -15,3 +15,11 @@ config USB_ISP1301
>>
>>         To compile this driver as a module, choose M here: the
>>         module will be called isp1301.
>> +
>> +config SAMSUNG_USBPHY
>> +       bool "Samsung USB PHY controller Driver"
>> +       depends on USB_S3C_HSOTG
>> +       select USB_OTG_UTILS
>> +       help
>> +         Enable this to support Samsung USB phy controller for samsung
>> +         SoCs.
>> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
>> index eca095b..dfca70d 100644
>> --- a/drivers/usb/phy/Makefile
>> +++ b/drivers/usb/phy/Makefile
>> @@ -5,3 +5,4 @@
>>  ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>>
>>  obj-$(CONFIG_USB_ISP1301)            += isp1301.o
>> +obj-$(CONFIG_SAMSUNG_USBPHY)         += samsung-usbphy.o
>> diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
>> new file mode 100644
>> index 0000000..739b6c9
>> --- /dev/null
>> +++ b/drivers/usb/phy/samsung-usbphy.c
>> @@ -0,0 +1,345 @@
>> +/* linux/drivers/usb/phy/samsung-usbphy.c
>> + *
>> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
>> + *              http://www.samsung.com
>> + *
>> + * Author: Praveen Paneri <p.paneri@samsung.com>
>> + *
>> + * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>> +*/
>> +
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/of.h>
>> +#include <linux/usb/otg.h>
>> +#include <linux/platform_data/samsung-usbphy.h>
>> +
>> +#include "samsung-usbphy.h"
>> +
>> +enum samsung_cpu_type {
>> +     TYPE_S3C64XX,
>> +     TYPE_EXYNOS4210,
>> +};
>> +
>> +/*
>> + * struct samsung_usbphy - transceiver driver state
>> + * @phy: transceiver structure
>> + * @plat: platform data
>> + * @dev: The parent device supplied to the probe function
>> + * @clk: usb phy clock
>> + * @regs: usb phy register memory base
>> + * @cpu_type: machine identifier
>> + */
>> +struct samsung_usbphy {
>> +     struct usb_phy  phy;
>> +     struct samsung_usbphy_data *plat;
>> +     struct device   *dev;
>> +     struct clk      *clk;
>> +     void __iomem    *regs;
>> +     int             cpu_type;
>> +};
>> +
>> +#define phy_to_sphy(x)               container_of((x), struct samsung_usbphy, phy)
>> +
>> +/*
>> + * Enables or disables the phy clock
>> + * returns 0 on success else the error
>> + */
>> +static int samsung_usbphy_clk_control(struct samsung_usbphy *sphy, bool on)
>> +{
>> +     if (on) {
>> +             if (!sphy->clk) {
>> +                     sphy->clk = clk_get(sphy->dev, "otg");
>> +                     if (IS_ERR(sphy->clk)) {
>> +                             dev_err(sphy->dev, "Failed to get otg clock\n");
>> +                             return PTR_ERR(sphy->clk);
>> +                     }
>> +             }
>> +             clk_enable(sphy->clk);
>> +     } else {
>> +             clk_disable(sphy->clk);
>> +             clk_put(sphy->clk);
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +/*
>> + * Returns reference clock frequency
>> + */
>> +static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
>> +{
>> +     struct clk *ref_clk;
>> +     int refclk_freq = 0;
>> +
>> +     ref_clk = clk_get(sphy->dev, "xusbxti");
>> +     if (IS_ERR(ref_clk)) {
>> +             dev_err(sphy->dev, "Failed to get reference clock\n");
>> +             return PTR_ERR(ref_clk);
>> +     }
>> +
>> +     switch (clk_get_rate(ref_clk)) {
>> +     case 12 * MHZ:
>> +             refclk_freq |= S3C_PHYCLK_CLKSEL_12M;
>> +             break;
>> +     case 24 * MHZ:
>> +             refclk_freq |= S3C_PHYCLK_CLKSEL_24M;
>> +             break;
>> +     default:
>> +     case 48 * MHZ:
>> +             /* default reference clock */
>> +             refclk_freq |= S3C_PHYCLK_CLKSEL_48M;
>> +             break;
>> +     }
>> +     clk_put(ref_clk);
>> +
>> +     return refclk_freq;
>> +}
>> +
>> +static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
>> +{
>> +     void __iomem *regs = sphy->regs;
>> +     u32 phypwr;
>> +     u32 phyclk;
>> +     u32 rstcon;
>> +
>> +     /* set clock frequency for PLL */
>> +     phyclk = samsung_usbphy_get_refclk_freq(sphy);
>> +     phypwr = readl(regs + S3C_PHYPWR);
>> +     rstcon = readl(regs + S3C_RSTCON);
>> +
>> +     switch (sphy->cpu_type) {
>> +     case TYPE_S3C64XX:
>> +             phyclk &= ~(S3C_PHYCLK_COMMON_ON_N);
>> +             phypwr &= ~S3C_PHYPWR_NORMAL_MASK;
>> +             rstcon |= S3C_RSTCON_PHY;
>> +             break;
>> +     case TYPE_EXYNOS4210:
>> +             phypwr &= ~EXYNOS4_PHYPWR_NORMAL_MASK;
>> +             rstcon |= S3C_RSTCON_PHY;
>> +     default:
>> +             break;
>> +     }
>> +
>> +     writel(phyclk, regs + S3C_PHYCLK);
>> +     /* set to normal of PHY0 */
>> +     writel(phypwr, regs + S3C_PHYPWR);
>> +     /* reset all ports of PHY and Link */
>> +     writel(rstcon, regs + S3C_RSTCON);
>> +     udelay(10);
>> +     rstcon &= ~S3C_RSTCON_PHY;
>> +     writel(rstcon, regs + S3C_RSTCON);
>> +}
>> +
>> +static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
>> +{
>> +     void __iomem *regs = sphy->regs;
>> +     u32 phypwr;
>> +
>> +     phypwr = readl(regs + S3C_PHYPWR);
>> +
>> +     switch (sphy->cpu_type) {
>> +     case TYPE_S3C64XX:
>> +             phypwr |= S3C_PHYPWR_NORMAL_MASK;
>> +             break;
>> +     case TYPE_EXYNOS4210:
>> +             phypwr |= EXYNOS4_PHYPWR_NORMAL_MASK;
>> +     default:
>> +             break;
>> +     }
>> +
>> +     /* unset to normal of PHY0 */
>> +     writel(phypwr, regs + S3C_PHYPWR);
>> +}
>> +
>> +/*
>> + * The function passed to the usb driver for phy initialization
>> + */
>> +static int samsung_usbphy_init(struct usb_phy *phy)
>> +{
>> +     struct samsung_usbphy *sphy;
>> +     int ret = 0;
>> +
>> +     sphy = phy_to_sphy(phy);
>> +
>> +     /* Enable the phy clock */
>> +     ret = samsung_usbphy_clk_control(sphy, true);
>> +     if (ret) {
>> +             dev_err(sphy->dev, "phy clock enable failed\n");
>> +             return ret;
>> +     }
>> +
>> +     /* Disable phy isolation */
>> +     if (sphy->plat && sphy->plat->pmu_isolation)
>> +             sphy->plat->pmu_isolation(false);
>> +
>> +     /* Initialize usb phy registers */
>> +     samsung_usbphy_enable(sphy);
>> +     return ret;
>> +}
>> +
>> +/*
>> + * The function passed to the usb driver for phy shutdown
>> + */
>> +static void samsung_usbphy_shutdown(struct usb_phy *phy)
>> +{
>> +     struct samsung_usbphy *sphy;
>> +
>> +     sphy = phy_to_sphy(phy);
>> +
>> +     /* De-initialize usb phy registers */
>> +     samsung_usbphy_disable(sphy);
>> +
>> +     /* Enable phy isolation */
>> +     if (sphy->plat && sphy->plat->pmu_isolation)
>> +             sphy->plat->pmu_isolation(true);
>> +
>> +     /* Disable the phy clock */
>> +     samsung_usbphy_clk_control(sphy, false);
>> +}
>> +
>> +static const struct of_device_id samsung_usbphy_dt_match[];
>> +
>> +static inline int samsung_usbphy_get_driver_data(struct platform_device *pdev)
>> +{
>> +#ifdef CONFIG_OF
>> +     int data;
>> +     if (pdev->dev.of_node) {
>> +             const struct of_device_id *match;
>> +             match = of_match_node(samsung_usbphy_dt_match,
>> +                                                     pdev->dev.of_node);
>> +             data = (int) match->data;
>> +             return data;
>> +     }
>> +#endif
>> +     return platform_get_device_id(pdev)->driver_data;
>> +}
>> +
>> +static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
>> +{
>> +     struct samsung_usbphy *sphy;
>> +     struct samsung_usbphy_data *pdata;
>> +     struct device *dev = &pdev->dev;
>> +     struct resource *phy_mem;
>> +     void __iomem    *phy_base;
>> +     int     ret;
>> +
>> +     pdata = pdev->dev.platform_data;
>> +     if (!pdata) {
>> +             dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
>> +             return -EINVAL;
>> +     }
>> +
>> +     phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +     if (!phy_mem) {
>> +             dev_err(dev, "%s: missing mem resource\n", __func__);
>> +             return -ENODEV;
>> +     }
>> +
>> +     phy_base = devm_request_and_ioremap(dev, phy_mem);
>> +     if (!phy_base) {
>> +             dev_err(dev, "%s: register mapping failed\n", __func__);
>> +             return -ENXIO;
>> +     }
>> +
>> +     sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
>> +     if (!sphy)
>> +             return -ENOMEM;
>> +
>> +     sphy->dev               = &pdev->dev;
>> +     sphy->plat              = pdata;
>> +     sphy->regs              = phy_base;
>> +     sphy->phy.dev           = sphy->dev;
>> +     sphy->phy.label         = "samsung-usbphy";
>> +     sphy->phy.init          = samsung_usbphy_init;
>> +     sphy->phy.shutdown      = samsung_usbphy_shutdown;
>> +     sphy->cpu_type          = samsung_usbphy_get_driver_data(pdev);
>> +
>> +     ret = usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
>> +     if (ret)
>> +             goto err;
>> +
>> +     platform_set_drvdata(pdev, sphy);
>> +
>> +     dev_info(&pdev->dev, "Initialized samsung USB OTG PHY module\n");
>
> please avoid dev_info() at the end of probe. It just makes booting
> noisier.
>
>> +err:
>> +     return ret;
>> +}
>> +
>> +static int __exit samsung_usbphy_remove(struct platform_device *pdev)
>> +{
>> +     struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
>> +
>> +     usb_remove_phy(&sphy->phy);
>> +
>> +     if (sphy->clk) {
>> +             clk_put(sphy->clk);
>> +             sphy->clk = NULL;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +#ifdef CONFIG_OF
>> +static const struct of_device_id samsung_usbphy_dt_match[] = {
>> +     {
>> +             .compatible = "samsung,s3c64xx-usbphy",
>> +             .data = (void *)TYPE_S3C64XX,
>> +     }, {
>> +             .compatible = "samsung,exynos4210-usbphy",
>> +             .data = (void *)TYPE_EXYNOS4210,
>> +     },
>> +     {},
>> +};
>> +MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
>> +#else
>> +#define samsung_usbphy_dt_match NULL
>> +#endif
>> +
>> +static struct platform_device_id samsung_usbphy_driver_ids[] = {
>> +     {
>> +             .name           = "s3c64xx-usbphy",
>> +             .driver_data    = TYPE_S3C64XX,
>> +     }, {
>> +             .name           = "exynos4210-usbphy",
>> +             .driver_data    = TYPE_EXYNOS4210,
>> +     },
>> +     {},
>> +};
>> +
>> +MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
>> +
>> +static struct platform_driver samsung_usbphy_driver = {
>> +     .probe          = samsung_usbphy_probe,
>> +     .remove         = __devexit_p(samsung_usbphy_remove),
>> +     .id_table       = samsung_usbphy_driver_ids,
>> +     .driver         = {
>> +             .name   = "samsung-usbphy",
>> +             .owner  = THIS_MODULE,
>> +             .of_match_table = samsung_usbphy_dt_match,
>> +     },
>> +};
>> +
>> +module_platform_driver(samsung_usbphy_driver);
>> +
>> +MODULE_DESCRIPTION("Samsung USB phy controller");
>> +MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>");
>> +MODULE_LICENSE("GPL");
>> +MODULE_ALIAS("platform:samsung-usbphy");
>> diff --git a/drivers/usb/phy/samsung-usbphy.h b/drivers/usb/phy/samsung-usbphy.h
>> new file mode 100644
>> index 0000000..093b1dc
>> --- /dev/null
>> +++ b/drivers/usb/phy/samsung-usbphy.h
>> @@ -0,0 +1,48 @@
>> +/*
>> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
>> + * Author: Yulgon Kim <yulgon.kim@samsung.com>
>> + * Author: Joonyoung Shim <jy0922.shim@samsung.com>
>> + * Author: Praveen Paneri <p.paneri@samsung.com>
>> + *
>> + * This program is free software; you can redistribute  it and/or modify it
>> + * under  the terms of  the GNU General  Public License as published by the
>> + * Free Software Foundation;  either version 2 of the  License, or (at your
>> + * option) any later version.
>> + */
>> +
>> +#ifndef __SAMSUNG_USBPHY_H
>> +#define __SAMSUNG_USBPHY_H
>> +
>> +#define S3C_PHYPWR                           (0x00)
>> +
>> +#define S3C_PHYPWR_NORMAL_MASK                       (0x19 << 0)
>> +#define S3C_PHYPWR_OTG_DISABLE                       (1 << 4)
>> +#define S3C_PHYPWR_ANALOG_POWERDOWN          (1 << 3)
>> +#define S3C_PHYPWR_FORCE_SUSPEND             (1 << 1)
>> +/* For Exynos4 */
>> +#define EXYNOS4_PHYPWR_NORMAL_MASK           (0x39 << 0)
>> +#define EXYNOS4_PHYPWR_SLEEP                 (1 << 5)
>> +
>> +#define S3C_PHYCLK                           (0x04)
>> +
>> +#define S3C_PHYCLK_MODE_SERIAL                       (1 << 6)
>> +#define S3C_PHYCLK_EXT_OSC                   (1 << 5)
>> +#define S3C_PHYCLK_COMMON_ON_N                       (1 << 4)
>> +#define S3C_PHYCLK_ID_PULL                   (1 << 2)
>> +#define S3C_PHYCLK_CLKSEL_MASK                       (0x3 << 0)
>> +#define S3C_PHYCLK_CLKSEL_SHIFT                      (0)
>> +#define S3C_PHYCLK_CLKSEL_48M                        (0x0 << 0)
>> +#define S3C_PHYCLK_CLKSEL_12M                        (0x2 << 0)
>> +#define S3C_PHYCLK_CLKSEL_24M                        (0x3 << 0)
>> +
>> +#define S3C_RSTCON                           (0x08)
>> +
>> +#define S3C_RSTCON_PHYCLK                    (1 << 2)
>> +#define S3C_RSTCON_HCLK                              (1 << 1)
>> +#define S3C_RSTCON_PHY                               (1 << 0)
>> +
>> +#ifndef MHZ
>> +#define MHZ (1000*1000)
>> +#endif
>
> this header is so small that it doesn't make sense to have it. pleae
> move these macros to C source file itself ;-)

Thanks! I will do that.

Praveen
>
> --
> balbi

[PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg

[Praveen Paneri]

On Fri, Aug 10, 2012 at 12:34 PM, Felipe Balbi <balbi@ti.com> wrote:
> Hi,
>
> On Fri, Aug 10, 2012 at 12:40:27PM +0530, Praveen Paneri wrote:
>> This driver uses usb_phy interface to interact with s3c-hsotg. Supports
>> phy_init and phy_shutdown functions to enable/disable phy. Tested with
>> smdk6410 and smdkv310. More SoCs can be brought under later.
>>
>> Signed-off-by: Praveen Paneri <p.paneri@samsung.com>
>> Acked-by: Heiko Stuebner <heiko@sntech.de>
>
> this looks good. Just 2 comments below.
>
>> ---
>>  .../devicetree/bindings/usb/samsung-usbphy.txt     |    9 +
>>  drivers/usb/phy/Kconfig                            |    8 +
>>  drivers/usb/phy/Makefile                           |    1 +
>>  drivers/usb/phy/samsung-usbphy.c                   |  345 ++++++++++++++++++++
>>  drivers/usb/phy/samsung-usbphy.h                   |   48 +++
>>  include/linux/platform_data/samsung-usbphy.h       |   27 ++
>>  6 files changed, 438 insertions(+), 0 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>>  create mode 100644 drivers/usb/phy/samsung-usbphy.c
>>  create mode 100644 drivers/usb/phy/samsung-usbphy.h
>>  create mode 100644 include/linux/platform_data/samsung-usbphy.h
>>
>> diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>> new file mode 100644
>> index 0000000..fefd9c8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>> @@ -0,0 +1,9 @@
>> +* Samsung's usb phy transceiver
>> +
>> +The Samsung's phy transceiver is used for controlling usb otg phy for
>> +s3c-hsotg usb device controller.
>> +
>> +Required properties:
>> +- compatible : should be "samsung,exynos4210-usbphy"
>> +- reg : base physical address of the phy registers and length of memory mapped
>> +     region.
>> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
>> index e7cf84f..d916477 100644
>> --- a/drivers/usb/phy/Kconfig
>> +++ b/drivers/usb/phy/Kconfig
>> @@ -15,3 +15,11 @@ config USB_ISP1301
>>
>>         To compile this driver as a module, choose M here: the
>>         module will be called isp1301.
>> +
>> +config SAMSUNG_USBPHY
>> +       bool "Samsung USB PHY controller Driver"
>> +       depends on USB_S3C_HSOTG
>> +       select USB_OTG_UTILS
>> +       help
>> +         Enable this to support Samsung USB phy controller for samsung
>> +         SoCs.
>> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
>> index eca095b..dfca70d 100644
>> --- a/drivers/usb/phy/Makefile
>> +++ b/drivers/usb/phy/Makefile
>> @@ -5,3 +5,4 @@
>>  ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>>
>>  obj-$(CONFIG_USB_ISP1301)            += isp1301.o
>> +obj-$(CONFIG_SAMSUNG_USBPHY)         += samsung-usbphy.o
>> diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
>> new file mode 100644
>> index 0000000..739b6c9
>> --- /dev/null
>> +++ b/drivers/usb/phy/samsung-usbphy.c
>> @@ -0,0 +1,345 @@
>> +/* linux/drivers/usb/phy/samsung-usbphy.c
>> + *
>> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
>> + *              http://www.samsung.com
>> + *
>> + * Author: Praveen Paneri <p.paneri@samsung.com>
>> + *
>> + * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>> +*/
>> +
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/of.h>
>> +#include <linux/usb/otg.h>
>> +#include <linux/platform_data/samsung-usbphy.h>
>> +
>> +#include "samsung-usbphy.h"
>> +
>> +enum samsung_cpu_type {
>> +     TYPE_S3C64XX,
>> +     TYPE_EXYNOS4210,
>> +};
>> +
>> +/*
>> + * struct samsung_usbphy - transceiver driver state
>> + * @phy: transceiver structure
>> + * @plat: platform data
>> + * @dev: The parent device supplied to the probe function
>> + * @clk: usb phy clock
>> + * @regs: usb phy register memory base
>> + * @cpu_type: machine identifier
>> + */
>> +struct samsung_usbphy {
>> +     struct usb_phy  phy;
>> +     struct samsung_usbphy_data *plat;
>> +     struct device   *dev;
>> +     struct clk      *clk;
>> +     void __iomem    *regs;
>> +     int             cpu_type;
>> +};
>> +
>> +#define phy_to_sphy(x)               container_of((x), struct samsung_usbphy, phy)
>> +
>> +/*
>> + * Enables or disables the phy clock
>> + * returns 0 on success else the error
>> + */
>> +static int samsung_usbphy_clk_control(struct samsung_usbphy *sphy, bool on)
>> +{
>> +     if (on) {
>> +             if (!sphy->clk) {
>> +                     sphy->clk = clk_get(sphy->dev, "otg");
>> +                     if (IS_ERR(sphy->clk)) {
>> +                             dev_err(sphy->dev, "Failed to get otg clock\n");
>> +                             return PTR_ERR(sphy->clk);
>> +                     }
>> +             }
>> +             clk_enable(sphy->clk);
>> +     } else {
>> +             clk_disable(sphy->clk);
>> +             clk_put(sphy->clk);
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +/*
>> + * Returns reference clock frequency
>> + */
>> +static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
>> +{
>> +     struct clk *ref_clk;
>> +     int refclk_freq = 0;
>> +
>> +     ref_clk = clk_get(sphy->dev, "xusbxti");
>> +     if (IS_ERR(ref_clk)) {
>> +             dev_err(sphy->dev, "Failed to get reference clock\n");
>> +             return PTR_ERR(ref_clk);
>> +     }
>> +
>> +     switch (clk_get_rate(ref_clk)) {
>> +     case 12 * MHZ:
>> +             refclk_freq |= S3C_PHYCLK_CLKSEL_12M;
>> +             break;
>> +     case 24 * MHZ:
>> +             refclk_freq |= S3C_PHYCLK_CLKSEL_24M;
>> +             break;
>> +     default:
>> +     case 48 * MHZ:
>> +             /* default reference clock */
>> +             refclk_freq |= S3C_PHYCLK_CLKSEL_48M;
>> +             break;
>> +     }
>> +     clk_put(ref_clk);
>> +
>> +     return refclk_freq;
>> +}
>> +
>> +static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
>> +{
>> +     void __iomem *regs = sphy->regs;
>> +     u32 phypwr;
>> +     u32 phyclk;
>> +     u32 rstcon;
>> +
>> +     /* set clock frequency for PLL */
>> +     phyclk = samsung_usbphy_get_refclk_freq(sphy);
>> +     phypwr = readl(regs + S3C_PHYPWR);
>> +     rstcon = readl(regs + S3C_RSTCON);
>> +
>> +     switch (sphy->cpu_type) {
>> +     case TYPE_S3C64XX:
>> +             phyclk &= ~(S3C_PHYCLK_COMMON_ON_N);
>> +             phypwr &= ~S3C_PHYPWR_NORMAL_MASK;
>> +             rstcon |= S3C_RSTCON_PHY;
>> +             break;
>> +     case TYPE_EXYNOS4210:
>> +             phypwr &= ~EXYNOS4_PHYPWR_NORMAL_MASK;
>> +             rstcon |= S3C_RSTCON_PHY;
>> +     default:
>> +             break;
>> +     }
>> +
>> +     writel(phyclk, regs + S3C_PHYCLK);
>> +     /* set to normal of PHY0 */
>> +     writel(phypwr, regs + S3C_PHYPWR);
>> +     /* reset all ports of PHY and Link */
>> +     writel(rstcon, regs + S3C_RSTCON);
>> +     udelay(10);
>> +     rstcon &= ~S3C_RSTCON_PHY;
>> +     writel(rstcon, regs + S3C_RSTCON);
>> +}
>> +
>> +static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
>> +{
>> +     void __iomem *regs = sphy->regs;
>> +     u32 phypwr;
>> +
>> +     phypwr = readl(regs + S3C_PHYPWR);
>> +
>> +     switch (sphy->cpu_type) {
>> +     case TYPE_S3C64XX:
>> +             phypwr |= S3C_PHYPWR_NORMAL_MASK;
>> +             break;
>> +     case TYPE_EXYNOS4210:
>> +             phypwr |= EXYNOS4_PHYPWR_NORMAL_MASK;
>> +     default:
>> +             break;
>> +     }
>> +
>> +     /* unset to normal of PHY0 */
>> +     writel(phypwr, regs + S3C_PHYPWR);
>> +}
>> +
>> +/*
>> + * The function passed to the usb driver for phy initialization
>> + */
>> +static int samsung_usbphy_init(struct usb_phy *phy)
>> +{
>> +     struct samsung_usbphy *sphy;
>> +     int ret = 0;
>> +
>> +     sphy = phy_to_sphy(phy);
>> +
>> +     /* Enable the phy clock */
>> +     ret = samsung_usbphy_clk_control(sphy, true);
>> +     if (ret) {
>> +             dev_err(sphy->dev, "phy clock enable failed\n");
>> +             return ret;
>> +     }
>> +
>> +     /* Disable phy isolation */
>> +     if (sphy->plat && sphy->plat->pmu_isolation)
>> +             sphy->plat->pmu_isolation(false);
>> +
>> +     /* Initialize usb phy registers */
>> +     samsung_usbphy_enable(sphy);
>> +     return ret;
>> +}
>> +
>> +/*
>> + * The function passed to the usb driver for phy shutdown
>> + */
>> +static void samsung_usbphy_shutdown(struct usb_phy *phy)
>> +{
>> +     struct samsung_usbphy *sphy;
>> +
>> +     sphy = phy_to_sphy(phy);
>> +
>> +     /* De-initialize usb phy registers */
>> +     samsung_usbphy_disable(sphy);
>> +
>> +     /* Enable phy isolation */
>> +     if (sphy->plat && sphy->plat->pmu_isolation)
>> +             sphy->plat->pmu_isolation(true);
>> +
>> +     /* Disable the phy clock */
>> +     samsung_usbphy_clk_control(sphy, false);
>> +}
>> +
>> +static const struct of_device_id samsung_usbphy_dt_match[];
>> +
>> +static inline int samsung_usbphy_get_driver_data(struct platform_device *pdev)
>> +{
>> +#ifdef CONFIG_OF
>> +     int data;
>> +     if (pdev->dev.of_node) {
>> +             const struct of_device_id *match;
>> +             match = of_match_node(samsung_usbphy_dt_match,
>> +                                                     pdev->dev.of_node);
>> +             data = (int) match->data;
>> +             return data;
>> +     }
>> +#endif
>> +     return platform_get_device_id(pdev)->driver_data;
>> +}
>> +
>> +static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
>> +{
>> +     struct samsung_usbphy *sphy;
>> +     struct samsung_usbphy_data *pdata;
>> +     struct device *dev = &pdev->dev;
>> +     struct resource *phy_mem;
>> +     void __iomem    *phy_base;
>> +     int     ret;
>> +
>> +     pdata = pdev->dev.platform_data;
>> +     if (!pdata) {
>> +             dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
>> +             return -EINVAL;
>> +     }
>> +
>> +     phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +     if (!phy_mem) {
>> +             dev_err(dev, "%s: missing mem resource\n", __func__);
>> +             return -ENODEV;
>> +     }
>> +
>> +     phy_base = devm_request_and_ioremap(dev, phy_mem);
>> +     if (!phy_base) {
>> +             dev_err(dev, "%s: register mapping failed\n", __func__);
>> +             return -ENXIO;
>> +     }
>> +
>> +     sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
>> +     if (!sphy)
>> +             return -ENOMEM;
>> +
>> +     sphy->dev               = &pdev->dev;
>> +     sphy->plat              = pdata;
>> +     sphy->regs              = phy_base;
>> +     sphy->phy.dev           = sphy->dev;
>> +     sphy->phy.label         = "samsung-usbphy";
>> +     sphy->phy.init          = samsung_usbphy_init;
>> +     sphy->phy.shutdown      = samsung_usbphy_shutdown;
>> +     sphy->cpu_type          = samsung_usbphy_get_driver_data(pdev);
>> +
>> +     ret = usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
>> +     if (ret)
>> +             goto err;
>> +
>> +     platform_set_drvdata(pdev, sphy);
>> +
>> +     dev_info(&pdev->dev, "Initialized samsung USB OTG PHY module\n");
>
> please avoid dev_info() at the end of probe. It just makes booting
> noisier.
>
>> +err:
>> +     return ret;
>> +}
>> +
>> +static int __exit samsung_usbphy_remove(struct platform_device *pdev)
>> +{
>> +     struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
>> +
>> +     usb_remove_phy(&sphy->phy);
>> +
>> +     if (sphy->clk) {
>> +             clk_put(sphy->clk);
>> +             sphy->clk = NULL;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +#ifdef CONFIG_OF
>> +static const struct of_device_id samsung_usbphy_dt_match[] = {
>> +     {
>> +             .compatible = "samsung,s3c64xx-usbphy",
>> +             .data = (void *)TYPE_S3C64XX,
>> +     }, {
>> +             .compatible = "samsung,exynos4210-usbphy",
>> +             .data = (void *)TYPE_EXYNOS4210,
>> +     },
>> +     {},
>> +};
>> +MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
>> +#else
>> +#define samsung_usbphy_dt_match NULL
>> +#endif
>> +
>> +static struct platform_device_id samsung_usbphy_driver_ids[] = {
>> +     {
>> +             .name           = "s3c64xx-usbphy",
>> +             .driver_data    = TYPE_S3C64XX,
>> +     }, {
>> +             .name           = "exynos4210-usbphy",
>> +             .driver_data    = TYPE_EXYNOS4210,
>> +     },
>> +     {},
>> +};
>> +
>> +MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
>> +
>> +static struct platform_driver samsung_usbphy_driver = {
>> +     .probe          = samsung_usbphy_probe,
>> +     .remove         = __devexit_p(samsung_usbphy_remove),
>> +     .id_table       = samsung_usbphy_driver_ids,
>> +     .driver         = {
>> +             .name   = "samsung-usbphy",
>> +             .owner  = THIS_MODULE,
>> +             .of_match_table = samsung_usbphy_dt_match,
>> +     },
>> +};
>> +
>> +module_platform_driver(samsung_usbphy_driver);
>> +
>> +MODULE_DESCRIPTION("Samsung USB phy controller");
>> +MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>");
>> +MODULE_LICENSE("GPL");
>> +MODULE_ALIAS("platform:samsung-usbphy");
>> diff --git a/drivers/usb/phy/samsung-usbphy.h b/drivers/usb/phy/samsung-usbphy.h
>> new file mode 100644
>> index 0000000..093b1dc
>> --- /dev/null
>> +++ b/drivers/usb/phy/samsung-usbphy.h
>> @@ -0,0 +1,48 @@
>> +/*
>> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
>> + * Author: Yulgon Kim <yulgon.kim@samsung.com>
>> + * Author: Joonyoung Shim <jy0922.shim@samsung.com>
>> + * Author: Praveen Paneri <p.paneri@samsung.com>
>> + *
>> + * This program is free software; you can redistribute  it and/or modify it
>> + * under  the terms of  the GNU General  Public License as published by the
>> + * Free Software Foundation;  either version 2 of the  License, or (at your
>> + * option) any later version.
>> + */
>> +
>> +#ifndef __SAMSUNG_USBPHY_H
>> +#define __SAMSUNG_USBPHY_H
>> +
>> +#define S3C_PHYPWR                           (0x00)
>> +
>> +#define S3C_PHYPWR_NORMAL_MASK                       (0x19 << 0)
>> +#define S3C_PHYPWR_OTG_DISABLE                       (1 << 4)
>> +#define S3C_PHYPWR_ANALOG_POWERDOWN          (1 << 3)
>> +#define S3C_PHYPWR_FORCE_SUSPEND             (1 << 1)
>> +/* For Exynos4 */
>> +#define EXYNOS4_PHYPWR_NORMAL_MASK           (0x39 << 0)
>> +#define EXYNOS4_PHYPWR_SLEEP                 (1 << 5)
>> +
>> +#define S3C_PHYCLK                           (0x04)
>> +
>> +#define S3C_PHYCLK_MODE_SERIAL                       (1 << 6)
>> +#define S3C_PHYCLK_EXT_OSC                   (1 << 5)
>> +#define S3C_PHYCLK_COMMON_ON_N                       (1 << 4)
>> +#define S3C_PHYCLK_ID_PULL                   (1 << 2)
>> +#define S3C_PHYCLK_CLKSEL_MASK                       (0x3 << 0)
>> +#define S3C_PHYCLK_CLKSEL_SHIFT                      (0)
>> +#define S3C_PHYCLK_CLKSEL_48M                        (0x0 << 0)
>> +#define S3C_PHYCLK_CLKSEL_12M                        (0x2 << 0)
>> +#define S3C_PHYCLK_CLKSEL_24M                        (0x3 << 0)
>> +
>> +#define S3C_RSTCON                           (0x08)
>> +
>> +#define S3C_RSTCON_PHYCLK                    (1 << 2)
>> +#define S3C_RSTCON_HCLK                              (1 << 1)
>> +#define S3C_RSTCON_PHY                               (1 << 0)
>> +
>> +#ifndef MHZ
>> +#define MHZ (1000*1000)
>> +#endif
>
> this header is so small that it doesn't make sense to have it. pleae
> move these macros to C source file itself ;-)

Thanks! I will do that.

Praveen
>
> --
> balbi

Re: [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg

[ABRAHAM, KISHON VIJAY]

Hi,

On Fri, Aug 10, 2012 at 12:40 PM, Praveen Paneri <p.paneri@samsung.com> wrote:
> This driver uses usb_phy interface to interact with s3c-hsotg. Supports
> phy_init and phy_shutdown functions to enable/disable phy. Tested with
> smdk6410 and smdkv310. More SoCs can be brought under later.
>
> Signed-off-by: Praveen Paneri <p.paneri@samsung.com>
> Acked-by: Heiko Stuebner <heiko@sntech.de>
> ---
>  .../devicetree/bindings/usb/samsung-usbphy.txt     |    9 +
>  drivers/usb/phy/Kconfig                            |    8 +
>  drivers/usb/phy/Makefile                           |    1 +
>  drivers/usb/phy/samsung-usbphy.c                   |  345 ++++++++++++++++++++
>  drivers/usb/phy/samsung-usbphy.h                   |   48 +++
>  include/linux/platform_data/samsung-usbphy.h       |   27 ++
>  6 files changed, 438 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>  create mode 100644 drivers/usb/phy/samsung-usbphy.c
>  create mode 100644 drivers/usb/phy/samsung-usbphy.h
>  create mode 100644 include/linux/platform_data/samsung-usbphy.h
>
> diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> new file mode 100644
> index 0000000..fefd9c8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> @@ -0,0 +1,9 @@
> +* Samsung's usb phy transceiver
> +
> +The Samsung's phy transceiver is used for controlling usb otg phy for
> +s3c-hsotg usb device controller.
> +
> +Required properties:
> +- compatible : should be "samsung,exynos4210-usbphy"
> +- reg : base physical address of the phy registers and length of memory mapped
> +       region.
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index e7cf84f..d916477 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -15,3 +15,11 @@ config USB_ISP1301
>
>           To compile this driver as a module, choose M here: the
>           module will be called isp1301.
> +
> +config SAMSUNG_USBPHY
> +       bool "Samsung USB PHY controller Driver"
> +       depends on USB_S3C_HSOTG
> +       select USB_OTG_UTILS
> +       help
> +         Enable this to support Samsung USB phy controller for samsung
> +         SoCs.
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index eca095b..dfca70d 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -5,3 +5,4 @@
>  ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>
>  obj-$(CONFIG_USB_ISP1301)              += isp1301.o
> +obj-$(CONFIG_SAMSUNG_USBPHY)           += samsung-usbphy.o
> diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
> new file mode 100644
> index 0000000..739b6c9
> --- /dev/null
> +++ b/drivers/usb/phy/samsung-usbphy.c
> @@ -0,0 +1,345 @@
> +/* linux/drivers/usb/phy/samsung-usbphy.c
> + *
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + *              http://www.samsung.com
> + *
> + * Author: Praveen Paneri <p.paneri@samsung.com>
> + *
> + * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

I suggest you drop that last paragraph unless you want to keep track
of Free Software Foundation office. Right now it is 51 Franklin
Street, Boston (http://www.fsf.org/about/contact/) :-)

-Kishon

[PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg

[ABRAHAM, KISHON VIJAY]

Hi,

On Fri, Aug 10, 2012 at 12:40 PM, Praveen Paneri <p.paneri@samsung.com> wrote:
> This driver uses usb_phy interface to interact with s3c-hsotg. Supports
> phy_init and phy_shutdown functions to enable/disable phy. Tested with
> smdk6410 and smdkv310. More SoCs can be brought under later.
>
> Signed-off-by: Praveen Paneri <p.paneri@samsung.com>
> Acked-by: Heiko Stuebner <heiko@sntech.de>
> ---
>  .../devicetree/bindings/usb/samsung-usbphy.txt     |    9 +
>  drivers/usb/phy/Kconfig                            |    8 +
>  drivers/usb/phy/Makefile                           |    1 +
>  drivers/usb/phy/samsung-usbphy.c                   |  345 ++++++++++++++++++++
>  drivers/usb/phy/samsung-usbphy.h                   |   48 +++
>  include/linux/platform_data/samsung-usbphy.h       |   27 ++
>  6 files changed, 438 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>  create mode 100644 drivers/usb/phy/samsung-usbphy.c
>  create mode 100644 drivers/usb/phy/samsung-usbphy.h
>  create mode 100644 include/linux/platform_data/samsung-usbphy.h
>
> diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> new file mode 100644
> index 0000000..fefd9c8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> @@ -0,0 +1,9 @@
> +* Samsung's usb phy transceiver
> +
> +The Samsung's phy transceiver is used for controlling usb otg phy for
> +s3c-hsotg usb device controller.
> +
> +Required properties:
> +- compatible : should be "samsung,exynos4210-usbphy"
> +- reg : base physical address of the phy registers and length of memory mapped
> +       region.
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index e7cf84f..d916477 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -15,3 +15,11 @@ config USB_ISP1301
>
>           To compile this driver as a module, choose M here: the
>           module will be called isp1301.
> +
> +config SAMSUNG_USBPHY
> +       bool "Samsung USB PHY controller Driver"
> +       depends on USB_S3C_HSOTG
> +       select USB_OTG_UTILS
> +       help
> +         Enable this to support Samsung USB phy controller for samsung
> +         SoCs.
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index eca095b..dfca70d 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -5,3 +5,4 @@
>  ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>
>  obj-$(CONFIG_USB_ISP1301)              += isp1301.o
> +obj-$(CONFIG_SAMSUNG_USBPHY)           += samsung-usbphy.o
> diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
> new file mode 100644
> index 0000000..739b6c9
> --- /dev/null
> +++ b/drivers/usb/phy/samsung-usbphy.c
> @@ -0,0 +1,345 @@
> +/* linux/drivers/usb/phy/samsung-usbphy.c
> + *
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + *              http://www.samsung.com
> + *
> + * Author: Praveen Paneri <p.paneri@samsung.com>
> + *
> + * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

I suggest you drop that last paragraph unless you want to keep track
of Free Software Foundation office. Right now it is 51 Franklin
Street, Boston (http://www.fsf.org/about/contact/) :-)

-Kishon

Re: [PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs

[Praveen Paneri]

On Fri, Aug 10, 2012 at 12:36 PM, Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> wrote:
> On Fri, Aug 10, 2012 at 12:40:26PM +0530, Praveen Paneri wrote:
>> Changes from v3:
>> Replaced susbsys_initcall()/module_exit() by module_platform_driver().
>> Accordingly in the hsotg driver returned -EPROBE_DEFER until phy driver
>> is registered
>> Removed unnecessary devm_usb_put_phy() call from the hsotg driver remove.
>>
>> Changes from v2:
>> Changed the driver filenames to samsung-usbphy
>> Changed 's3c' to 'samsung' for platform device as well as platform data
>> Moved platform data structure to a separate file
>> Rectified coding style related errors
>>
>> Changes from v1:
>> Rebased patches to latest usb-next branch
>> Changed the name 'sec_usbphy' to 'samsung_usbphy'
>>
>> This patch set introduces a phy driver for samsung SoCs. It uses the existing
>> transceiver infrastructure to provide phy control functions. Use of this driver
>> can be extended for usb host phy as well. Over the period of time all the phy
>> related code for most of the samsung SoCs can be integrated here.
>> Removing the existing phy code from mach-s3c64xx. Same can be done for other SoCs
>> when they start supporting this phy driver.
>> This driver is tested with smdk6410 and Exynos4210(with DT).
>>
>> Praveen Paneri (5):
>>   usb: phy: samsung: Introducing usb phy driver for hsotg
>>   usb: s3c-hsotg: Adding phy driver support
>>   ARM: S3C64XX: Removing old phy setup code
>>   ARM: S3C64XX: Enabling samsung-usbphy driver
>>   ARM: Exynos4210: Enabling samsung-usbphy driver
>
> just one idea. It looks like after introducing the PHY, you converted
> all users to create the phy device. I wonder if you should have a
Not all
> patch 6/6 which will remove pdata->init support from s3c_hsotg.c and
> stick to using phy driver.
This will make the hsotg driver unusable for others (in mach-s5pv210
and mach-exynos) which are not supported in the phy driver as of now.
My idea was to drop the pdata->init when the last user gets the phy
support. Need some time for that :-)

Praveen
>
> --
> balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs

[Praveen Paneri]

On Fri, Aug 10, 2012 at 12:36 PM, Felipe Balbi <balbi@ti.com> wrote:
> On Fri, Aug 10, 2012 at 12:40:26PM +0530, Praveen Paneri wrote:
>> Changes from v3:
>> Replaced susbsys_initcall()/module_exit() by module_platform_driver().
>> Accordingly in the hsotg driver returned -EPROBE_DEFER until phy driver
>> is registered
>> Removed unnecessary devm_usb_put_phy() call from the hsotg driver remove.
>>
>> Changes from v2:
>> Changed the driver filenames to samsung-usbphy
>> Changed 's3c' to 'samsung' for platform device as well as platform data
>> Moved platform data structure to a separate file
>> Rectified coding style related errors
>>
>> Changes from v1:
>> Rebased patches to latest usb-next branch
>> Changed the name 'sec_usbphy' to 'samsung_usbphy'
>>
>> This patch set introduces a phy driver for samsung SoCs. It uses the existing
>> transceiver infrastructure to provide phy control functions. Use of this driver
>> can be extended for usb host phy as well. Over the period of time all the phy
>> related code for most of the samsung SoCs can be integrated here.
>> Removing the existing phy code from mach-s3c64xx. Same can be done for other SoCs
>> when they start supporting this phy driver.
>> This driver is tested with smdk6410 and Exynos4210(with DT).
>>
>> Praveen Paneri (5):
>>   usb: phy: samsung: Introducing usb phy driver for hsotg
>>   usb: s3c-hsotg: Adding phy driver support
>>   ARM: S3C64XX: Removing old phy setup code
>>   ARM: S3C64XX: Enabling samsung-usbphy driver
>>   ARM: Exynos4210: Enabling samsung-usbphy driver
>
> just one idea. It looks like after introducing the PHY, you converted
> all users to create the phy device. I wonder if you should have a
Not all
> patch 6/6 which will remove pdata->init support from s3c_hsotg.c and
> stick to using phy driver.
This will make the hsotg driver unusable for others (in mach-s5pv210
and mach-exynos) which are not supported in the phy driver as of now.
My idea was to drop the pdata->init when the last user gets the phy
support. Need some time for that :-)

Praveen
>
> --
> balbi

Re: [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg

[Praveen Paneri]

On Fri, Aug 10, 2012 at 12:49 PM, ABRAHAM, KISHON VIJAY <kishon-l0cyMroinI0@public.gmane.org> wrote:
> Hi,
>
> On Fri, Aug 10, 2012 at 12:40 PM, Praveen Paneri <p.paneri-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> wrote:
>> This driver uses usb_phy interface to interact with s3c-hsotg. Supports
>> phy_init and phy_shutdown functions to enable/disable phy. Tested with
>> smdk6410 and smdkv310. More SoCs can be brought under later.
>>
>> Signed-off-by: Praveen Paneri <p.paneri-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>> Acked-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
>> ---
>>  .../devicetree/bindings/usb/samsung-usbphy.txt     |    9 +
>>  drivers/usb/phy/Kconfig                            |    8 +
>>  drivers/usb/phy/Makefile                           |    1 +
>>  drivers/usb/phy/samsung-usbphy.c                   |  345 ++++++++++++++++++++
>>  drivers/usb/phy/samsung-usbphy.h                   |   48 +++
>>  include/linux/platform_data/samsung-usbphy.h       |   27 ++
>>  6 files changed, 438 insertions(+), 0 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>>  create mode 100644 drivers/usb/phy/samsung-usbphy.c
>>  create mode 100644 drivers/usb/phy/samsung-usbphy.h
>>  create mode 100644 include/linux/platform_data/samsung-usbphy.h
>>
>> diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>> new file mode 100644
>> index 0000000..fefd9c8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>> @@ -0,0 +1,9 @@
>> +* Samsung's usb phy transceiver
>> +
>> +The Samsung's phy transceiver is used for controlling usb otg phy for
>> +s3c-hsotg usb device controller.
>> +
>> +Required properties:
>> +- compatible : should be "samsung,exynos4210-usbphy"
>> +- reg : base physical address of the phy registers and length of memory mapped
>> +       region.
>> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
>> index e7cf84f..d916477 100644
>> --- a/drivers/usb/phy/Kconfig
>> +++ b/drivers/usb/phy/Kconfig
>> @@ -15,3 +15,11 @@ config USB_ISP1301
>>
>>           To compile this driver as a module, choose M here: the
>>           module will be called isp1301.
>> +
>> +config SAMSUNG_USBPHY
>> +       bool "Samsung USB PHY controller Driver"
>> +       depends on USB_S3C_HSOTG
>> +       select USB_OTG_UTILS
>> +       help
>> +         Enable this to support Samsung USB phy controller for samsung
>> +         SoCs.
>> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
>> index eca095b..dfca70d 100644
>> --- a/drivers/usb/phy/Makefile
>> +++ b/drivers/usb/phy/Makefile
>> @@ -5,3 +5,4 @@
>>  ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>>
>>  obj-$(CONFIG_USB_ISP1301)              += isp1301.o
>> +obj-$(CONFIG_SAMSUNG_USBPHY)           += samsung-usbphy.o
>> diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
>> new file mode 100644
>> index 0000000..739b6c9
>> --- /dev/null
>> +++ b/drivers/usb/phy/samsung-usbphy.c
>> @@ -0,0 +1,345 @@
>> +/* linux/drivers/usb/phy/samsung-usbphy.c
>> + *
>> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
>> + *              http://www.samsung.com
>> + *
>> + * Author: Praveen Paneri <p.paneri-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>> + *
>> + * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>
> I suggest you drop that last paragraph unless you want to keep track
> of Free Software Foundation office. Right now it is 51 Franklin
> Street, Boston (http://www.fsf.org/about/contact/) :-)
Yeah! it can be dropped :-)

Praveen
>
> -Kishon
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg

[Praveen Paneri]

On Fri, Aug 10, 2012 at 12:49 PM, ABRAHAM, KISHON VIJAY <kishon@ti.com> wrote:
> Hi,
>
> On Fri, Aug 10, 2012 at 12:40 PM, Praveen Paneri <p.paneri@samsung.com> wrote:
>> This driver uses usb_phy interface to interact with s3c-hsotg. Supports
>> phy_init and phy_shutdown functions to enable/disable phy. Tested with
>> smdk6410 and smdkv310. More SoCs can be brought under later.
>>
>> Signed-off-by: Praveen Paneri <p.paneri@samsung.com>
>> Acked-by: Heiko Stuebner <heiko@sntech.de>
>> ---
>>  .../devicetree/bindings/usb/samsung-usbphy.txt     |    9 +
>>  drivers/usb/phy/Kconfig                            |    8 +
>>  drivers/usb/phy/Makefile                           |    1 +
>>  drivers/usb/phy/samsung-usbphy.c                   |  345 ++++++++++++++++++++
>>  drivers/usb/phy/samsung-usbphy.h                   |   48 +++
>>  include/linux/platform_data/samsung-usbphy.h       |   27 ++
>>  6 files changed, 438 insertions(+), 0 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>>  create mode 100644 drivers/usb/phy/samsung-usbphy.c
>>  create mode 100644 drivers/usb/phy/samsung-usbphy.h
>>  create mode 100644 include/linux/platform_data/samsung-usbphy.h
>>
>> diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>> new file mode 100644
>> index 0000000..fefd9c8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>> @@ -0,0 +1,9 @@
>> +* Samsung's usb phy transceiver
>> +
>> +The Samsung's phy transceiver is used for controlling usb otg phy for
>> +s3c-hsotg usb device controller.
>> +
>> +Required properties:
>> +- compatible : should be "samsung,exynos4210-usbphy"
>> +- reg : base physical address of the phy registers and length of memory mapped
>> +       region.
>> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
>> index e7cf84f..d916477 100644
>> --- a/drivers/usb/phy/Kconfig
>> +++ b/drivers/usb/phy/Kconfig
>> @@ -15,3 +15,11 @@ config USB_ISP1301
>>
>>           To compile this driver as a module, choose M here: the
>>           module will be called isp1301.
>> +
>> +config SAMSUNG_USBPHY
>> +       bool "Samsung USB PHY controller Driver"
>> +       depends on USB_S3C_HSOTG
>> +       select USB_OTG_UTILS
>> +       help
>> +         Enable this to support Samsung USB phy controller for samsung
>> +         SoCs.
>> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
>> index eca095b..dfca70d 100644
>> --- a/drivers/usb/phy/Makefile
>> +++ b/drivers/usb/phy/Makefile
>> @@ -5,3 +5,4 @@
>>  ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>>
>>  obj-$(CONFIG_USB_ISP1301)              += isp1301.o
>> +obj-$(CONFIG_SAMSUNG_USBPHY)           += samsung-usbphy.o
>> diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
>> new file mode 100644
>> index 0000000..739b6c9
>> --- /dev/null
>> +++ b/drivers/usb/phy/samsung-usbphy.c
>> @@ -0,0 +1,345 @@
>> +/* linux/drivers/usb/phy/samsung-usbphy.c
>> + *
>> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
>> + *              http://www.samsung.com
>> + *
>> + * Author: Praveen Paneri <p.paneri@samsung.com>
>> + *
>> + * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>
> I suggest you drop that last paragraph unless you want to keep track
> of Free Software Foundation office. Right now it is 51 Franklin
> Street, Boston (http://www.fsf.org/about/contact/) :-)
Yeah! it can be dropped :-)

Praveen
>
> -Kishon
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 2328 bytes --]

On Fri, Aug 10, 2012 at 01:04:48PM +0530, Praveen Paneri wrote:
> On Fri, Aug 10, 2012 at 12:36 PM, Felipe Balbi <balbi@ti.com> wrote:
> > On Fri, Aug 10, 2012 at 12:40:26PM +0530, Praveen Paneri wrote:
> >> Changes from v3:
> >> Replaced susbsys_initcall()/module_exit() by module_platform_driver().
> >> Accordingly in the hsotg driver returned -EPROBE_DEFER until phy driver
> >> is registered
> >> Removed unnecessary devm_usb_put_phy() call from the hsotg driver remove.
> >>
> >> Changes from v2:
> >> Changed the driver filenames to samsung-usbphy
> >> Changed 's3c' to 'samsung' for platform device as well as platform data
> >> Moved platform data structure to a separate file
> >> Rectified coding style related errors
> >>
> >> Changes from v1:
> >> Rebased patches to latest usb-next branch
> >> Changed the name 'sec_usbphy' to 'samsung_usbphy'
> >>
> >> This patch set introduces a phy driver for samsung SoCs. It uses the existing
> >> transceiver infrastructure to provide phy control functions. Use of this driver
> >> can be extended for usb host phy as well. Over the period of time all the phy
> >> related code for most of the samsung SoCs can be integrated here.
> >> Removing the existing phy code from mach-s3c64xx. Same can be done for other SoCs
> >> when they start supporting this phy driver.
> >> This driver is tested with smdk6410 and Exynos4210(with DT).
> >>
> >> Praveen Paneri (5):
> >>   usb: phy: samsung: Introducing usb phy driver for hsotg
> >>   usb: s3c-hsotg: Adding phy driver support
> >>   ARM: S3C64XX: Removing old phy setup code
> >>   ARM: S3C64XX: Enabling samsung-usbphy driver
> >>   ARM: Exynos4210: Enabling samsung-usbphy driver
> >
> > just one idea. It looks like after introducing the PHY, you converted
> > all users to create the phy device. I wonder if you should have a
> Not all
> > patch 6/6 which will remove pdata->init support from s3c_hsotg.c and
> > stick to using phy driver.
> This will make the hsotg driver unusable for others (in mach-s5pv210
> and mach-exynos) which are not supported in the phy driver as of now.
> My idea was to drop the pdata->init when the last user gets the phy
> support. Need some time for that :-)

makes sense. wasn't aware there were more users. no problem then ;-)

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs

[Felipe Balbi]

On Fri, Aug 10, 2012 at 01:04:48PM +0530, Praveen Paneri wrote:
> On Fri, Aug 10, 2012 at 12:36 PM, Felipe Balbi <balbi@ti.com> wrote:
> > On Fri, Aug 10, 2012 at 12:40:26PM +0530, Praveen Paneri wrote:
> >> Changes from v3:
> >> Replaced susbsys_initcall()/module_exit() by module_platform_driver().
> >> Accordingly in the hsotg driver returned -EPROBE_DEFER until phy driver
> >> is registered
> >> Removed unnecessary devm_usb_put_phy() call from the hsotg driver remove.
> >>
> >> Changes from v2:
> >> Changed the driver filenames to samsung-usbphy
> >> Changed 's3c' to 'samsung' for platform device as well as platform data
> >> Moved platform data structure to a separate file
> >> Rectified coding style related errors
> >>
> >> Changes from v1:
> >> Rebased patches to latest usb-next branch
> >> Changed the name 'sec_usbphy' to 'samsung_usbphy'
> >>
> >> This patch set introduces a phy driver for samsung SoCs. It uses the existing
> >> transceiver infrastructure to provide phy control functions. Use of this driver
> >> can be extended for usb host phy as well. Over the period of time all the phy
> >> related code for most of the samsung SoCs can be integrated here.
> >> Removing the existing phy code from mach-s3c64xx. Same can be done for other SoCs
> >> when they start supporting this phy driver.
> >> This driver is tested with smdk6410 and Exynos4210(with DT).
> >>
> >> Praveen Paneri (5):
> >>   usb: phy: samsung: Introducing usb phy driver for hsotg
> >>   usb: s3c-hsotg: Adding phy driver support
> >>   ARM: S3C64XX: Removing old phy setup code
> >>   ARM: S3C64XX: Enabling samsung-usbphy driver
> >>   ARM: Exynos4210: Enabling samsung-usbphy driver
> >
> > just one idea. It looks like after introducing the PHY, you converted
> > all users to create the phy device. I wonder if you should have a
> Not all
> > patch 6/6 which will remove pdata->init support from s3c_hsotg.c and
> > stick to using phy driver.
> This will make the hsotg driver unusable for others (in mach-s5pv210
> and mach-exynos) which are not supported in the phy driver as of now.
> My idea was to drop the pdata->init when the last user gets the phy
> support. Need some time for that :-)

makes sense. wasn't aware there were more users. no problem then ;-)

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120810/2a667316/attachment.sig>

Re: [PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs

[Tomasz Figa]

Hi Praveen,

Praveen Paneri wrote:
> Changes from v3:
> Replaced susbsys_initcall()/module_exit() by module_platform_driver().
> Accordingly in the hsotg driver returned -EPROBE_DEFER until phy driver
> is registered
> Removed unnecessary devm_usb_put_phy() call from the hsotg driver remove.
> 
> Changes from v2:
> Changed the driver filenames to samsung-usbphy
> Changed 's3c' to 'samsung' for platform device as well as platform data
> Moved platform data structure to a separate file
> Rectified coding style related errors
> 
> Changes from v1:
> Rebased patches to latest usb-next branch
> Changed the name 'sec_usbphy' to 'samsung_usbphy'
> 
> This patch set introduces a phy driver for samsung SoCs. It uses the
> existing transceiver infrastructure to provide phy control functions. Use
> of this driver can be extended for usb host phy as well. Over the period
> of time all the phy related code for most of the samsung SoCs can be
> integrated here. Removing the existing phy code from mach-s3c64xx. Same
> can be done for other SoCs when they start supporting this phy driver.
> This driver is tested with smdk6410 and Exynos4210(with DT).
> 
> Praveen Paneri (5):
>   usb: phy: samsung: Introducing usb phy driver for hsotg
>   usb: s3c-hsotg: Adding phy driver support
>   ARM: S3C64XX: Removing old phy setup code
>   ARM: S3C64XX: Enabling samsung-usbphy driver
>   ARM: Exynos4210: Enabling samsung-usbphy driver
> 
>  .../devicetree/bindings/usb/samsung-usbphy.txt     |    9 +
>  arch/arm/boot/dts/exynos4210.dtsi                  |    5 +
>  arch/arm/mach-exynos/include/mach/map.h            |    1 +
>  arch/arm/mach-exynos/mach-exynos4-dt.c             |    8 +
>  arch/arm/mach-exynos/setup-usb-phy.c               |   13 +
>  arch/arm/mach-s3c64xx/include/mach/map.h           |    2 +
>  arch/arm/mach-s3c64xx/mach-crag6410.c              |    7 +-
>  arch/arm/mach-s3c64xx/mach-smartq.c                |    8 +-
>  arch/arm/mach-s3c64xx/mach-smdk6410.c              |    7 +-
>  arch/arm/mach-s3c64xx/setup-usb-phy.c              |   79 +----
>  arch/arm/plat-samsung/devs.c                       |   33 ++
>  arch/arm/plat-samsung/include/plat/devs.h          |    1 +
>  arch/arm/plat-samsung/include/plat/usb-phy.h       |    1 +
>  drivers/usb/gadget/s3c-hsotg.c                     |   37 ++-
>  drivers/usb/phy/Kconfig                            |    8 +
>  drivers/usb/phy/Makefile                           |    1 +
>  drivers/usb/phy/samsung-usbphy.c                   |  345
>  ++++++++++++++++++++
>  drivers/usb/phy/samsung-usbphy.h                   |   48 +++
>  include/linux/platform_data/samsung-usbphy.h       |   27 ++
>  19 files changed, 549 insertions(+), 91 deletions(-)
>  create mode 100644
>  Documentation/devicetree/bindings/usb/samsung-usbphy.txt create mode
>  100644 drivers/usb/phy/samsung-usbphy.c create mode 100644
>  drivers/usb/phy/samsung-usbphy.h create mode 100644
>  include/linux/platform_data/samsung-usbphy.h
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Any news on this patchset?

Best regards,
-- 
Tomasz Figa
Samsung Poland R&D Center