* [PATCHv1 1/3] Bluetooth: btmrvl: Correct num_block name
@ 2012-09-27 7:51 Andrei Emeltchenko
2012-09-27 7:51 ` [PATCHv1 2/3] Bluetooth: btmrvl: Use DIV_ROUND_UP macro Andrei Emeltchenko
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Andrei Emeltchenko @ 2012-09-27 7:51 UTC (permalink / raw)
To: linux-bluetooth
From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Make code readable by correcting name from buf_block_len to num_blocks
since it represent number of blocks; NOT a length of a block buffer.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
drivers/bluetooth/btmrvl_sdio.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index da4df9c..25dc53b 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -492,7 +492,7 @@ done:
static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
{
u16 buf_len = 0;
- int ret, buf_block_len, blksz;
+ int ret, num_blocks, blksz;
struct sk_buff *skb = NULL;
u32 type;
u8 *payload = NULL;
@@ -516,18 +516,17 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
BT_DBG("%s buf_len %zu", hdev->name, buf_len);
blksz = SDIO_BLOCK_SIZE;
- buf_block_len = (buf_len + blksz - 1) / blksz;
+ num_blocks = (buf_len + blksz - 1) / blksz;
if (buf_len <= SDIO_HEADER_LEN
- || (buf_block_len * blksz) > ALLOC_BUF_SIZE) {
+ || (num_blocks * blksz) > ALLOC_BUF_SIZE) {
BT_ERR("invalid packet length: %d", buf_len);
ret = -EINVAL;
goto exit;
}
/* Allocate buffer */
- skb = bt_skb_alloc(buf_block_len * blksz + BTSDIO_DMA_ALIGN,
- GFP_ATOMIC);
+ skb = bt_skb_alloc(num_blocks * blksz + BTSDIO_DMA_ALIGN, GFP_ATOMIC);
if (skb == NULL) {
BT_ERR("No free skb");
goto exit;
@@ -543,7 +542,7 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
payload = skb->data;
ret = sdio_readsb(card->func, payload, card->ioport,
- buf_block_len * blksz);
+ num_blocks * blksz);
if (ret < 0) {
BT_ERR("readsb failed: %d", ret);
ret = -EIO;
@@ -594,7 +593,7 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
default:
BT_ERR("Unknown packet type:%d", type);
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, payload,
- blksz * buf_block_len);
+ blksz * num_blocks);
kfree_skb(skb);
skb = NULL;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCHv1 2/3] Bluetooth: btmrvl: Use DIV_ROUND_UP macro
2012-09-27 7:51 [PATCHv1 1/3] Bluetooth: btmrvl: Correct num_block name Andrei Emeltchenko
@ 2012-09-27 7:51 ` Andrei Emeltchenko
2012-09-27 7:51 ` [PATCHv1 3/3] Bluetooth: btmrvl: Fix skb buffer overflow Andrei Emeltchenko
2012-09-27 20:48 ` [PATCHv1 1/3] Bluetooth: btmrvl: Correct num_block name Gustavo Padovan
2 siblings, 0 replies; 9+ messages in thread
From: Andrei Emeltchenko @ 2012-09-27 7:51 UTC (permalink / raw)
To: linux-bluetooth
From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The kernel.h macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) / (d))
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
drivers/bluetooth/btmrvl_sdio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 25dc53b..1457f25 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -516,7 +516,7 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
BT_DBG("%s buf_len %zu", hdev->name, buf_len);
blksz = SDIO_BLOCK_SIZE;
- num_blocks = (buf_len + blksz - 1) / blksz;
+ num_blocks = DIV_ROUND_UP(buf_len, blksz);
if (buf_len <= SDIO_HEADER_LEN
|| (num_blocks * blksz) > ALLOC_BUF_SIZE) {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCHv1 3/3] Bluetooth: btmrvl: Fix skb buffer overflow
2012-09-27 7:51 [PATCHv1 1/3] Bluetooth: btmrvl: Correct num_block name Andrei Emeltchenko
2012-09-27 7:51 ` [PATCHv1 2/3] Bluetooth: btmrvl: Use DIV_ROUND_UP macro Andrei Emeltchenko
@ 2012-09-27 7:51 ` Andrei Emeltchenko
2012-09-27 20:51 ` Gustavo Padovan
2012-09-27 20:48 ` [PATCHv1 1/3] Bluetooth: btmrvl: Correct num_block name Gustavo Padovan
2 siblings, 1 reply; 9+ messages in thread
From: Andrei Emeltchenko @ 2012-09-27 7:51 UTC (permalink / raw)
To: linux-bluetooth
From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add extra check to avoid skb buffer overflow. Fixes crash below:
[ 101.030427] ------------[ cut here ]------------
[ 101.030459] kernel BUG at net/core/skbuff.c:127!
[ 101.030486] invalid opcode: 0000 [#1] SMP
...
[ 101.030806] Pid: 2010, comm: btmrvl_main_ser Not tainted 3.5.0+ #80 Laptop
[ 101.030859] EIP: 0060:[<c14f2ba9>] EFLAGS: 00010282 CPU: 0
[ 101.030894] EIP is at skb_put+0x99/0xa0
[ 101.030919] EAX: 00000080 EBX: f129380b ECX: ef923540 EDX: 00000001
[ 101.030956] ESI: f00a4000 EDI: 00001003 EBP: ed4a5efc ESP: ed4a5ecc
[ 101.030992] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 101.031024] CR0: 8005003b CR2: 08fca014 CR3: 30960000 CR4: 000407f0
[ 101.031062] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 101.031100] DR6: ffff0ff0 DR7: 00000400
[ 101.031125] Process btmrvl_main_ser (pid: 2010, ti=ed4a4000 task=ef923540 task.ti=ed4a4000)
[ 101.031174] Stack:
[ 101.031188] c18126f8 c1651938 f853f8d2 00001003 00001003 f1292800 f1292808 f129380b
[ 101.031250] f1292940 f00a4000 eddb1280 efc0f9c0 ed4a5f44 f853f8d2 00000040 00000000
[ 101.031312] ef923540 c15ee096 ef923540 eddb12d4 00000004 f00a4000 00000040 00000000
[ 101.031376] Call Trace:
[ 101.031396] [<f853f8d2>] ? btmrvl_sdio_process_int_status+0x272/0x3d0 [btmrvl_sdio]
[ 101.031444] [<f853f8d2>] btmrvl_sdio_process_int_status+0x272/0x3d0 [btmrvl_sdio]
[ 101.031488] [<c15ee096>] ? _raw_spin_unlock_irqrestore+0x36/0x70
[ 101.031526] [<f85a46e4>] btmrvl_service_main_thread+0x244/0x300 [btmrvl]
[ 101.031568] [<f853fb50>] ? btmrvl_sdio_poll_card_status.isra.6.constprop.7+0x90/0x90 [btmrvl_sdio]
[ 101.031619] [<c107eda0>] ? try_to_wake_up+0x270/0x270
[ 101.031648] [<f85a44a0>] ? btmrvl_process_event+0x3b0/0x3b0 [btmrvl]
[ 101.031686] [<c106d19d>] kthread+0x7d/0x90
[ 101.031713] [<c106d120>] ? flush_kthread_work+0x150/0x150
[ 101.031745] [<c15f5a82>] kernel_thread_helper+0x6/0x10
...
[ 101.032008] EIP: [<c14f2ba9>] skb_put+0x99/0xa0 SS:ESP 0068:ed4a5ecc
[ 101.056125] ---[ end trace a0bd01d1a9a796c8 ]---
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
drivers/bluetooth/btmrvl_sdio.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 1457f25..b3b3680 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -554,7 +554,16 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
*/
buf_len = payload[0];
- buf_len |= (u16) payload[1] << 8;
+ buf_len |= payload[1] << 8;
+ buf_len |= payload[2] << 16;
+
+ if (buf_len > blksz * num_blocks) {
+ BT_ERR("Skip incorrect packet: hdrlen %d buffer %d",
+ buf_len, blksz * num_blocks);
+ ret = -EIO;
+ goto exit;
+ }
+
type = payload[3];
BT_DBG("%s len %zu type %d", hdev->name, buf_len, type);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCHv1 1/3] Bluetooth: btmrvl: Correct num_block name
2012-09-27 7:51 [PATCHv1 1/3] Bluetooth: btmrvl: Correct num_block name Andrei Emeltchenko
2012-09-27 7:51 ` [PATCHv1 2/3] Bluetooth: btmrvl: Use DIV_ROUND_UP macro Andrei Emeltchenko
2012-09-27 7:51 ` [PATCHv1 3/3] Bluetooth: btmrvl: Fix skb buffer overflow Andrei Emeltchenko
@ 2012-09-27 20:48 ` Gustavo Padovan
2 siblings, 0 replies; 9+ messages in thread
From: Gustavo Padovan @ 2012-09-27 20:48 UTC (permalink / raw)
To: Andrei Emeltchenko; +Cc: linux-bluetooth
Hi Andrei,
* Andrei Emeltchenko <Andrei.Emeltchenko.news@gmail.com> [2012-09-27 10:51:46 +0300]:
> From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
>
> Make code readable by correcting name from buf_block_len to num_blocks
> since it represent number of blocks; NOT a length of a block buffer.
>
> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
> ---
> drivers/bluetooth/btmrvl_sdio.c | 13 ++++++-------
> 1 file changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
> index da4df9c..25dc53b 100644
> --- a/drivers/bluetooth/btmrvl_sdio.c
> +++ b/drivers/bluetooth/btmrvl_sdio.c
> @@ -492,7 +492,7 @@ done:
> static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
> {
> u16 buf_len = 0;
> - int ret, buf_block_len, blksz;
> + int ret, num_blocks, blksz;
> struct sk_buff *skb = NULL;
> u32 type;
> u8 *payload = NULL;
> @@ -516,18 +516,17 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
> BT_DBG("%s buf_len %zu", hdev->name, buf_len);
>
> blksz = SDIO_BLOCK_SIZE;
> - buf_block_len = (buf_len + blksz - 1) / blksz;
> + num_blocks = (buf_len + blksz - 1) / blksz;
>
> if (buf_len <= SDIO_HEADER_LEN
> - || (buf_block_len * blksz) > ALLOC_BUF_SIZE) {
> + || (num_blocks * blksz) > ALLOC_BUF_SIZE) {
> BT_ERR("invalid packet length: %d", buf_len);
> ret = -EINVAL;
> goto exit;
> }
>
> /* Allocate buffer */
> - skb = bt_skb_alloc(buf_block_len * blksz + BTSDIO_DMA_ALIGN,
> - GFP_ATOMIC);
> + skb = bt_skb_alloc(num_blocks * blksz + BTSDIO_DMA_ALIGN, GFP_ATOMIC);
> if (skb == NULL) {
> BT_ERR("No free skb");
> goto exit;
> @@ -543,7 +542,7 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
> payload = skb->data;
>
> ret = sdio_readsb(card->func, payload, card->ioport,
> - buf_block_len * blksz);
> + num_blocks * blksz);
> if (ret < 0) {
> BT_ERR("readsb failed: %d", ret);
> ret = -EIO;
> @@ -594,7 +593,7 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
> default:
> BT_ERR("Unknown packet type:%d", type);
> print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, payload,
> - blksz * buf_block_len);
> + blksz * num_blocks);
>
> kfree_skb(skb);
> skb = NULL;
By some reason this patch fails to apply:
Applying: Bluetooth: btmrvl: Correct num_block name
fatal: sha1 information is lacking or useless
(drivers/bluetooth/btmrvl_sdio.c).
Repository lacks necessary blobs to fall back on 3-way merge.
Cannot fall back to three-way merge.
Patch failed at 0001 Bluetooth: btmrvl: Correct num_block name
Gustavo
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCHv1 3/3] Bluetooth: btmrvl: Fix skb buffer overflow
2012-09-27 7:51 ` [PATCHv1 3/3] Bluetooth: btmrvl: Fix skb buffer overflow Andrei Emeltchenko
@ 2012-09-27 20:51 ` Gustavo Padovan
2012-09-28 11:36 ` [PATCH 1/3] Bluetooth: btmrvl: Correct num_block name Andrei Emeltchenko
0 siblings, 1 reply; 9+ messages in thread
From: Gustavo Padovan @ 2012-09-27 20:51 UTC (permalink / raw)
To: Andrei Emeltchenko; +Cc: linux-bluetooth
Hi Andrei,
* Andrei Emeltchenko <Andrei.Emeltchenko.news@gmail.com> [2012-09-27 10:51:48 +0300]:
> From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
>
> Add extra check to avoid skb buffer overflow. Fixes crash below:
>
> [ 101.030427] ------------[ cut here ]------------
> [ 101.030459] kernel BUG at net/core/skbuff.c:127!
> [ 101.030486] invalid opcode: 0000 [#1] SMP
> ...
> [ 101.030806] Pid: 2010, comm: btmrvl_main_ser Not tainted 3.5.0+ #80 Laptop
> [ 101.030859] EIP: 0060:[<c14f2ba9>] EFLAGS: 00010282 CPU: 0
> [ 101.030894] EIP is at skb_put+0x99/0xa0
> [ 101.030919] EAX: 00000080 EBX: f129380b ECX: ef923540 EDX: 00000001
> [ 101.030956] ESI: f00a4000 EDI: 00001003 EBP: ed4a5efc ESP: ed4a5ecc
> [ 101.030992] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
> [ 101.031024] CR0: 8005003b CR2: 08fca014 CR3: 30960000 CR4: 000407f0
> [ 101.031062] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
> [ 101.031100] DR6: ffff0ff0 DR7: 00000400
> [ 101.031125] Process btmrvl_main_ser (pid: 2010, ti=ed4a4000 task=ef923540 task.ti=ed4a4000)
> [ 101.031174] Stack:
> [ 101.031188] c18126f8 c1651938 f853f8d2 00001003 00001003 f1292800 f1292808 f129380b
> [ 101.031250] f1292940 f00a4000 eddb1280 efc0f9c0 ed4a5f44 f853f8d2 00000040 00000000
> [ 101.031312] ef923540 c15ee096 ef923540 eddb12d4 00000004 f00a4000 00000040 00000000
> [ 101.031376] Call Trace:
> [ 101.031396] [<f853f8d2>] ? btmrvl_sdio_process_int_status+0x272/0x3d0 [btmrvl_sdio]
> [ 101.031444] [<f853f8d2>] btmrvl_sdio_process_int_status+0x272/0x3d0 [btmrvl_sdio]
> [ 101.031488] [<c15ee096>] ? _raw_spin_unlock_irqrestore+0x36/0x70
> [ 101.031526] [<f85a46e4>] btmrvl_service_main_thread+0x244/0x300 [btmrvl]
> [ 101.031568] [<f853fb50>] ? btmrvl_sdio_poll_card_status.isra.6.constprop.7+0x90/0x90 [btmrvl_sdio]
> [ 101.031619] [<c107eda0>] ? try_to_wake_up+0x270/0x270
> [ 101.031648] [<f85a44a0>] ? btmrvl_process_event+0x3b0/0x3b0 [btmrvl]
> [ 101.031686] [<c106d19d>] kthread+0x7d/0x90
> [ 101.031713] [<c106d120>] ? flush_kthread_work+0x150/0x150
> [ 101.031745] [<c15f5a82>] kernel_thread_helper+0x6/0x10
> ...
> [ 101.032008] EIP: [<c14f2ba9>] skb_put+0x99/0xa0 SS:ESP 0068:ed4a5ecc
> [ 101.056125] ---[ end trace a0bd01d1a9a796c8 ]---
>
> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
> ---
> drivers/bluetooth/btmrvl_sdio.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
> index 1457f25..b3b3680 100644
> --- a/drivers/bluetooth/btmrvl_sdio.c
> +++ b/drivers/bluetooth/btmrvl_sdio.c
> @@ -554,7 +554,16 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
> */
>
> buf_len = payload[0];
> - buf_len |= (u16) payload[1] << 8;
> + buf_len |= payload[1] << 8;
> + buf_len |= payload[2] << 16;
> +
> + if (buf_len > blksz * num_blocks) {
> + BT_ERR("Skip incorrect packet: hdrlen %d buffer %d",
> + buf_len, blksz * num_blocks);
> + ret = -EIO;
> + goto exit;
> + }
> +
> type = payload[3];
>
> BT_DBG("%s len %zu type %d", hdev->name, buf_len, type);
All three patches doesn't apply. Please check them.
Gustavo
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/3] Bluetooth: btmrvl: Correct num_block name
2012-09-27 20:51 ` Gustavo Padovan
@ 2012-09-28 11:36 ` Andrei Emeltchenko
2012-09-28 11:36 ` [PATCH 2/3] Bluetooth: btmrvl: Use DIV_ROUND_UP macro Andrei Emeltchenko
2012-09-28 11:36 ` [PATCH 3/3] Bluetooth: btmrvl: Fix skb buffer overflow Andrei Emeltchenko
0 siblings, 2 replies; 9+ messages in thread
From: Andrei Emeltchenko @ 2012-09-28 11:36 UTC (permalink / raw)
To: linux-bluetooth; +Cc: bzhao
From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Make code readable by correcting name from buf_block_len to num_blocks
since it represent number of blocks; NOT a length of a block buffer.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
drivers/bluetooth/btmrvl_sdio.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 3f4bfc8..645b42e 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -492,7 +492,7 @@ done:
static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
{
u16 buf_len = 0;
- int ret, buf_block_len, blksz;
+ int ret, num_blocks, blksz;
struct sk_buff *skb = NULL;
u32 type;
u8 *payload = NULL;
@@ -514,18 +514,17 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
}
blksz = SDIO_BLOCK_SIZE;
- buf_block_len = (buf_len + blksz - 1) / blksz;
+ num_blocks = (buf_len + blksz - 1) / blksz;
if (buf_len <= SDIO_HEADER_LEN
- || (buf_block_len * blksz) > ALLOC_BUF_SIZE) {
+ || (num_blocks * blksz) > ALLOC_BUF_SIZE) {
BT_ERR("invalid packet length: %d", buf_len);
ret = -EINVAL;
goto exit;
}
/* Allocate buffer */
- skb = bt_skb_alloc(buf_block_len * blksz + BTSDIO_DMA_ALIGN,
- GFP_ATOMIC);
+ skb = bt_skb_alloc(num_blocks * blksz + BTSDIO_DMA_ALIGN, GFP_ATOMIC);
if (skb == NULL) {
BT_ERR("No free skb");
goto exit;
@@ -541,7 +540,7 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
payload = skb->data;
ret = sdio_readsb(card->func, payload, card->ioport,
- buf_block_len * blksz);
+ num_blocks * blksz);
if (ret < 0) {
BT_ERR("readsb failed: %d", ret);
ret = -EIO;
@@ -590,7 +589,7 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
default:
BT_ERR("Unknown packet type:%d", type);
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, payload,
- blksz * buf_block_len);
+ blksz * num_blocks);
kfree_skb(skb);
skb = NULL;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/3] Bluetooth: btmrvl: Use DIV_ROUND_UP macro
2012-09-28 11:36 ` [PATCH 1/3] Bluetooth: btmrvl: Correct num_block name Andrei Emeltchenko
@ 2012-09-28 11:36 ` Andrei Emeltchenko
2012-09-28 11:36 ` [PATCH 3/3] Bluetooth: btmrvl: Fix skb buffer overflow Andrei Emeltchenko
1 sibling, 0 replies; 9+ messages in thread
From: Andrei Emeltchenko @ 2012-09-28 11:36 UTC (permalink / raw)
To: linux-bluetooth; +Cc: bzhao
From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The kernel.h macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) / (d))
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
drivers/bluetooth/btmrvl_sdio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 645b42e..ec5c456 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -514,7 +514,7 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
}
blksz = SDIO_BLOCK_SIZE;
- num_blocks = (buf_len + blksz - 1) / blksz;
+ num_blocks = DIV_ROUND_UP(buf_len, blksz);
if (buf_len <= SDIO_HEADER_LEN
|| (num_blocks * blksz) > ALLOC_BUF_SIZE) {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 3/3] Bluetooth: btmrvl: Fix skb buffer overflow
2012-09-28 11:36 ` [PATCH 1/3] Bluetooth: btmrvl: Correct num_block name Andrei Emeltchenko
2012-09-28 11:36 ` [PATCH 2/3] Bluetooth: btmrvl: Use DIV_ROUND_UP macro Andrei Emeltchenko
@ 2012-09-28 11:36 ` Andrei Emeltchenko
2012-09-28 19:52 ` Gustavo Padovan
1 sibling, 1 reply; 9+ messages in thread
From: Andrei Emeltchenko @ 2012-09-28 11:36 UTC (permalink / raw)
To: linux-bluetooth; +Cc: bzhao
From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add extra check to avoid skb buffer overflow. Fixes crash below:
[ 101.030427] ------------[ cut here ]------------
[ 101.030459] kernel BUG at net/core/skbuff.c:127!
[ 101.030486] invalid opcode: 0000 [#1] SMP
...
[ 101.030806] Pid: 2010, comm: btmrvl_main_ser Not tainted 3.5.0+ #80 Laptop
[ 101.030859] EIP: 0060:[<c14f2ba9>] EFLAGS: 00010282 CPU: 0
[ 101.030894] EIP is at skb_put+0x99/0xa0
[ 101.030919] EAX: 00000080 EBX: f129380b ECX: ef923540 EDX: 00000001
[ 101.030956] ESI: f00a4000 EDI: 00001003 EBP: ed4a5efc ESP: ed4a5ecc
[ 101.030992] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 101.031024] CR0: 8005003b CR2: 08fca014 CR3: 30960000 CR4: 000407f0
[ 101.031062] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 101.031100] DR6: ffff0ff0 DR7: 00000400
[ 101.031125] Process btmrvl_main_ser (pid: 2010, ti=ed4a4000 task=ef923540 task.ti=ed4a4000)
[ 101.031174] Stack:
[ 101.031188] c18126f8 c1651938 f853f8d2 00001003 00001003 f1292800 f1292808 f129380b
[ 101.031250] f1292940 f00a4000 eddb1280 efc0f9c0 ed4a5f44 f853f8d2 00000040 00000000
[ 101.031312] ef923540 c15ee096 ef923540 eddb12d4 00000004 f00a4000 00000040 00000000
[ 101.031376] Call Trace:
[ 101.031396] [<f853f8d2>] ? btmrvl_sdio_process_int_status+0x272/0x3d0 [btmrvl_sdio]
[ 101.031444] [<f853f8d2>] btmrvl_sdio_process_int_status+0x272/0x3d0 [btmrvl_sdio]
[ 101.031488] [<c15ee096>] ? _raw_spin_unlock_irqrestore+0x36/0x70
[ 101.031526] [<f85a46e4>] btmrvl_service_main_thread+0x244/0x300 [btmrvl]
[ 101.031568] [<f853fb50>] ? btmrvl_sdio_poll_card_status.isra.6.constprop.7+0x90/0x90 [btmrvl_sdio]
[ 101.031619] [<c107eda0>] ? try_to_wake_up+0x270/0x270
[ 101.031648] [<f85a44a0>] ? btmrvl_process_event+0x3b0/0x3b0 [btmrvl]
[ 101.031686] [<c106d19d>] kthread+0x7d/0x90
[ 101.031713] [<c106d120>] ? flush_kthread_work+0x150/0x150
[ 101.031745] [<c15f5a82>] kernel_thread_helper+0x6/0x10
...
[ 101.032008] EIP: [<c14f2ba9>] skb_put+0x99/0xa0 SS:ESP 0068:ed4a5ecc
[ 101.056125] ---[ end trace a0bd01d1a9a796c8 ]---
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
drivers/bluetooth/btmrvl_sdio.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index ec5c456..1896e91 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -552,7 +552,16 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
*/
buf_len = payload[0];
- buf_len |= (u16) payload[1] << 8;
+ buf_len |= payload[1] << 8;
+ buf_len |= payload[2] << 16;
+
+ if (buf_len > blksz * num_blocks) {
+ BT_ERR("Skip incorrect packet: hdrlen %d buffer %d",
+ buf_len, blksz * num_blocks);
+ ret = -EIO;
+ goto exit;
+ }
+
type = payload[3];
switch (type) {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 3/3] Bluetooth: btmrvl: Fix skb buffer overflow
2012-09-28 11:36 ` [PATCH 3/3] Bluetooth: btmrvl: Fix skb buffer overflow Andrei Emeltchenko
@ 2012-09-28 19:52 ` Gustavo Padovan
0 siblings, 0 replies; 9+ messages in thread
From: Gustavo Padovan @ 2012-09-28 19:52 UTC (permalink / raw)
To: Andrei Emeltchenko; +Cc: linux-bluetooth, bzhao
Hi Andrei,
* Andrei Emeltchenko <Andrei.Emeltchenko.news@gmail.com> [2012-09-28 14:36:10 +0300]:
> From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
>
> Add extra check to avoid skb buffer overflow. Fixes crash below:
>
> [ 101.030427] ------------[ cut here ]------------
> [ 101.030459] kernel BUG at net/core/skbuff.c:127!
> [ 101.030486] invalid opcode: 0000 [#1] SMP
> ...
> [ 101.030806] Pid: 2010, comm: btmrvl_main_ser Not tainted 3.5.0+ #80 Laptop
> [ 101.030859] EIP: 0060:[<c14f2ba9>] EFLAGS: 00010282 CPU: 0
> [ 101.030894] EIP is at skb_put+0x99/0xa0
> [ 101.030919] EAX: 00000080 EBX: f129380b ECX: ef923540 EDX: 00000001
> [ 101.030956] ESI: f00a4000 EDI: 00001003 EBP: ed4a5efc ESP: ed4a5ecc
> [ 101.030992] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
> [ 101.031024] CR0: 8005003b CR2: 08fca014 CR3: 30960000 CR4: 000407f0
> [ 101.031062] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
> [ 101.031100] DR6: ffff0ff0 DR7: 00000400
> [ 101.031125] Process btmrvl_main_ser (pid: 2010, ti=ed4a4000 task=ef923540 task.ti=ed4a4000)
> [ 101.031174] Stack:
> [ 101.031188] c18126f8 c1651938 f853f8d2 00001003 00001003 f1292800 f1292808 f129380b
> [ 101.031250] f1292940 f00a4000 eddb1280 efc0f9c0 ed4a5f44 f853f8d2 00000040 00000000
> [ 101.031312] ef923540 c15ee096 ef923540 eddb12d4 00000004 f00a4000 00000040 00000000
> [ 101.031376] Call Trace:
> [ 101.031396] [<f853f8d2>] ? btmrvl_sdio_process_int_status+0x272/0x3d0 [btmrvl_sdio]
> [ 101.031444] [<f853f8d2>] btmrvl_sdio_process_int_status+0x272/0x3d0 [btmrvl_sdio]
> [ 101.031488] [<c15ee096>] ? _raw_spin_unlock_irqrestore+0x36/0x70
> [ 101.031526] [<f85a46e4>] btmrvl_service_main_thread+0x244/0x300 [btmrvl]
> [ 101.031568] [<f853fb50>] ? btmrvl_sdio_poll_card_status.isra.6.constprop.7+0x90/0x90 [btmrvl_sdio]
> [ 101.031619] [<c107eda0>] ? try_to_wake_up+0x270/0x270
> [ 101.031648] [<f85a44a0>] ? btmrvl_process_event+0x3b0/0x3b0 [btmrvl]
> [ 101.031686] [<c106d19d>] kthread+0x7d/0x90
> [ 101.031713] [<c106d120>] ? flush_kthread_work+0x150/0x150
> [ 101.031745] [<c15f5a82>] kernel_thread_helper+0x6/0x10
> ...
> [ 101.032008] EIP: [<c14f2ba9>] skb_put+0x99/0xa0 SS:ESP 0068:ed4a5ecc
> [ 101.056125] ---[ end trace a0bd01d1a9a796c8 ]---
>
> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
> ---
> drivers/bluetooth/btmrvl_sdio.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
All 3 patches were applied. Thanks.
Gustavo
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2012-09-28 19:52 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-09-27 7:51 [PATCHv1 1/3] Bluetooth: btmrvl: Correct num_block name Andrei Emeltchenko
2012-09-27 7:51 ` [PATCHv1 2/3] Bluetooth: btmrvl: Use DIV_ROUND_UP macro Andrei Emeltchenko
2012-09-27 7:51 ` [PATCHv1 3/3] Bluetooth: btmrvl: Fix skb buffer overflow Andrei Emeltchenko
2012-09-27 20:51 ` Gustavo Padovan
2012-09-28 11:36 ` [PATCH 1/3] Bluetooth: btmrvl: Correct num_block name Andrei Emeltchenko
2012-09-28 11:36 ` [PATCH 2/3] Bluetooth: btmrvl: Use DIV_ROUND_UP macro Andrei Emeltchenko
2012-09-28 11:36 ` [PATCH 3/3] Bluetooth: btmrvl: Fix skb buffer overflow Andrei Emeltchenko
2012-09-28 19:52 ` Gustavo Padovan
2012-09-27 20:48 ` [PATCHv1 1/3] Bluetooth: btmrvl: Correct num_block name Gustavo Padovan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.