[RESEND][PATCH 18/20][SCSI] mpt3sas: Common API to set Diagnostic trigger for MPT based controllers

[RESEND][PATCH 18/20][SCSI] mpt3sas: Common API to set Diagnostic trigger for MPT based controllers

[sreekanth.reddy]

This patch provides common API to set Diagnostic trigger for MPT
(Message Passing Technology) based controllers

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Reviewed-by: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com>
---

diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
new file mode 100644
index 0000000..da6c5f2
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
@@ -0,0 +1,434 @@
+/*
+ * This module provides common API to set Diagnostic trigger for MPT
+ * (Message Passing Technology) based controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
+ * Copyright (C) 2012  LSI Corporation
+ *  (mailto:DL-MPTFusionLinux@lsi.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/compat.h>
+#include <linux/poll.h>
+
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include "mpt3sas_base.h"
+
+/**
+ * _mpt3sas_raise_sigio - notifiy app
+ * @ioc: per adapter object
+ * @event_data:
+ */
+static void
+_mpt3sas_raise_sigio(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data)
+{
+	Mpi2EventNotificationReply_t *mpi_reply;
+	u16 sz, event_data_sz;
+	unsigned long flags;
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n",
+	    ioc->name, __func__));
+
+	sz = offsetof(Mpi2EventNotificationReply_t, EventData) +
+	    sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T) + 4;
+	mpi_reply = kzalloc(sz, GFP_KERNEL);
+	if (!mpi_reply)
+		goto out;
+	mpi_reply->Event = cpu_to_le16(MPI3_EVENT_DIAGNOSTIC_TRIGGER_FIRED);
+	event_data_sz = (sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T) + 4) / 4;
+	mpi_reply->EventDataLength = cpu_to_le16(event_data_sz);
+	memcpy(&mpi_reply->EventData, event_data,
+	    sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: add to driver event log\n",
+		ioc->name, __func__));
+	mpt3sas_ctl_add_to_event_log(ioc, mpi_reply);
+	kfree(mpi_reply);
+ out:
+
+	/* clearing the diag_trigger_active flag */
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: clearing diag_trigger_active flag\n",
+		ioc->name, __func__));
+	ioc->diag_trigger_active = 0;
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+	    __func__));
+}
+
+/**
+ * mpt3sas_process_trigger_data - process the event data for the trigger
+ * @ioc: per adapter object
+ * @event_data:
+ */
+void
+mpt3sas_process_trigger_data(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data)
+{
+	u8 issue_reset = 0;
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n",
+	    ioc->name, __func__));
+
+	/* release the diag buffer trace */
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
+		dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: release trace diag buffer\n", ioc->name, __func__));
+		mpt3sas_send_diag_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE,
+		    &issue_reset);
+	}
+
+	_mpt3sas_raise_sigio(ioc, event_data);
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+	    __func__));
+}
+
+/**
+ * mpt3sas_trigger_master - Master trigger handler
+ * @ioc: per adapter object
+ * @trigger_bitmask:
+ *
+ */
+void
+mpt3sas_trigger_master(struct MPT3SAS_ADAPTER *ioc, u32 trigger_bitmask)
+{
+	struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
+	unsigned long flags;
+	u8 found_match = 0;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+
+	if (trigger_bitmask & MASTER_TRIGGER_FW_FAULT ||
+	    trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET)
+		goto by_pass_checks;
+
+	/* check to see if trace buffers are currently registered */
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	/* check to see if trace buffers are currently released */
+	if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+ by_pass_checks:
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: enter - trigger_bitmask = 0x%08x\n",
+		ioc->name, __func__, trigger_bitmask));
+
+	/* don't send trigger if an trigger is currently active */
+	if (ioc->diag_trigger_active) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		goto out;
+	}
+
+	/* check for the trigger condition */
+	if (ioc->diag_trigger_master.MasterData & trigger_bitmask) {
+		found_match = 1;
+		ioc->diag_trigger_active = 1;
+		dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: setting diag_trigger_active flag\n",
+		ioc->name, __func__));
+	}
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+
+	if (!found_match)
+		goto out;
+
+	memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
+	event_data.trigger_type = MPT3SAS_TRIGGER_MASTER;
+	event_data.u.master.MasterData = trigger_bitmask;
+
+	if (trigger_bitmask & MASTER_TRIGGER_FW_FAULT ||
+	    trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET)
+		_mpt3sas_raise_sigio(ioc, &event_data);
+	else
+		mpt3sas_send_trigger_data_event(ioc, &event_data);
+
+ out:
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+	    __func__));
+}
+
+/**
+ * mpt3sas_trigger_event - Event trigger handler
+ * @ioc: per adapter object
+ * @event:
+ * @log_entry_qualifier:
+ *
+ */
+void
+mpt3sas_trigger_event(struct MPT3SAS_ADAPTER *ioc, u16 event,
+	u16 log_entry_qualifier)
+{
+	struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
+	struct SL_WH_EVENT_TRIGGER_T *event_trigger;
+	int i;
+	unsigned long flags;
+	u8 found_match;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+
+	/* check to see if trace buffers are currently registered */
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	/* check to see if trace buffers are currently released */
+	if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: enter - event = 0x%04x, log_entry_qualifier = 0x%04x\n",
+		ioc->name, __func__, event, log_entry_qualifier));
+
+	/* don't send trigger if an trigger is currently active */
+	if (ioc->diag_trigger_active) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		goto out;
+	}
+
+	/* check for the trigger condition */
+	event_trigger = ioc->diag_trigger_event.EventTriggerEntry;
+	for (i = 0 , found_match = 0; i < ioc->diag_trigger_event.ValidEntries
+	    && !found_match; i++, event_trigger++) {
+		if (event_trigger->EventValue != event)
+			continue;
+		if (event == MPI2_EVENT_LOG_ENTRY_ADDED) {
+			if (event_trigger->LogEntryQualifier ==
+			    log_entry_qualifier)
+				found_match = 1;
+			continue;
+		}
+		found_match = 1;
+		ioc->diag_trigger_active = 1;
+		dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: setting diag_trigger_active flag\n",
+			ioc->name, __func__));
+	}
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+
+	if (!found_match)
+		goto out;
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: setting diag_trigger_active flag\n",
+		ioc->name, __func__));
+	memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
+	event_data.trigger_type = MPT3SAS_TRIGGER_EVENT;
+	event_data.u.event.EventValue = event;
+	event_data.u.event.LogEntryQualifier = log_entry_qualifier;
+	mpt3sas_send_trigger_data_event(ioc, &event_data);
+ out:
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+	    __func__));
+}
+
+/**
+ * mpt3sas_trigger_scsi - SCSI trigger handler
+ * @ioc: per adapter object
+ * @sense_key:
+ * @asc:
+ * @ascq:
+ *
+ */
+void
+mpt3sas_trigger_scsi(struct MPT3SAS_ADAPTER *ioc, u8 sense_key, u8 asc,
+	u8 ascq)
+{
+	struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
+	struct SL_WH_SCSI_TRIGGER_T *scsi_trigger;
+	int i;
+	unsigned long flags;
+	u8 found_match;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+
+	/* check to see if trace buffers are currently registered */
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	/* check to see if trace buffers are currently released */
+	if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: enter - sense_key = 0x%02x, asc = 0x%02x, ascq = 0x%02x\n",
+		ioc->name, __func__, sense_key, asc, ascq));
+
+	/* don't send trigger if an trigger is currently active */
+	if (ioc->diag_trigger_active) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		goto out;
+	}
+
+	/* check for the trigger condition */
+	scsi_trigger = ioc->diag_trigger_scsi.SCSITriggerEntry;
+	for (i = 0 , found_match = 0; i < ioc->diag_trigger_scsi.ValidEntries
+	    && !found_match; i++, scsi_trigger++) {
+		if (scsi_trigger->SenseKey != sense_key)
+			continue;
+		if (!(scsi_trigger->ASC == 0xFF || scsi_trigger->ASC == asc))
+			continue;
+		if (!(scsi_trigger->ASCQ == 0xFF || scsi_trigger->ASCQ == ascq))
+			continue;
+		found_match = 1;
+		ioc->diag_trigger_active = 1;
+	}
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+
+	if (!found_match)
+		goto out;
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: setting diag_trigger_active flag\n",
+		ioc->name, __func__));
+	memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
+	event_data.trigger_type = MPT3SAS_TRIGGER_SCSI;
+	event_data.u.scsi.SenseKey = sense_key;
+	event_data.u.scsi.ASC = asc;
+	event_data.u.scsi.ASCQ = ascq;
+	mpt3sas_send_trigger_data_event(ioc, &event_data);
+ out:
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+	    __func__));
+}
+
+/**
+ * mpt3sas_trigger_mpi - MPI trigger handler
+ * @ioc: per adapter object
+ * @ioc_status:
+ * @loginfo:
+ *
+ */
+void
+mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status, u32 loginfo)
+{
+	struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
+	struct SL_WH_MPI_TRIGGER_T *mpi_trigger;
+	int i;
+	unsigned long flags;
+	u8 found_match;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+
+	/* check to see if trace buffers are currently registered */
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	/* check to see if trace buffers are currently released */
+	if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: enter - ioc_status = 0x%04x, loginfo = 0x%08x\n",
+		ioc->name, __func__, ioc_status, loginfo));
+
+	/* don't send trigger if an trigger is currently active */
+	if (ioc->diag_trigger_active) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		goto out;
+	}
+
+	/* check for the trigger condition */
+	mpi_trigger = ioc->diag_trigger_mpi.MPITriggerEntry;
+	for (i = 0 , found_match = 0; i < ioc->diag_trigger_mpi.ValidEntries
+	    && !found_match; i++, mpi_trigger++) {
+		if (mpi_trigger->IOCStatus != ioc_status)
+			continue;
+		if (!(mpi_trigger->IocLogInfo == 0xFFFFFFFF ||
+		    mpi_trigger->IocLogInfo == loginfo))
+			continue;
+		found_match = 1;
+		ioc->diag_trigger_active = 1;
+	}
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+
+	if (!found_match)
+		goto out;
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: setting diag_trigger_active flag\n",
+		ioc->name, __func__));
+	memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
+	event_data.trigger_type = MPT3SAS_TRIGGER_MPI;
+	event_data.u.mpi.IOCStatus = ioc_status;
+	event_data.u.mpi.IocLogInfo = loginfo;
+	mpt3sas_send_trigger_data_event(ioc, &event_data);
+ out:
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+	    __func__));
+}