[ 00/76] 3.6.3-stable review

[ 00/76] 3.6.3-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.6.3 release.
There are 76 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Oct 21 02:43:30 UTC 2012.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.6.3-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Maxim Kachur <mcdebugger@duganet.ru>
    ALSA: emu10k1: add chip details for E-mu 1010 PCIe card

Takashi Iwai <tiwai@suse.de>
    ALSA: ac97 - Fix missing NULL check in snd_ac97_cvol_new()

Peter Ujfalusi <peter.ujfalusi@ti.com>
    ASoC: omap-abe-twl6040: Fix typo of Vibrator

Mark Brown <broonie@opensource.wolfsonmicro.com>
    ASoC: wm2200: Fix non-inverted OUT2 mute control

Mark Brown <broonie@opensource.wolfsonmicro.com>
    ASoC: wm2200: Use rev A register patches on rev B

Guennadi Liakhovetski <g.liakhovetski@gmx.de>
    ASoC: fsi: don't reschedule DMA from an atomic context

David Henningsson <david.henningsson@canonical.com>
    ALSA: hda - Always check array bounds in alc_get_line_out_pfx

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Stop LPIB delay counting on broken hardware

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Fix registration race of VGA switcheroo

Fabio Porcedda <fabio.porcedda@gmail.com>
    usb: gadget: at91_udc: fix dt support

Peter Huewe <peter.huewe@infineon.com>
    tpm: Propagate error from tpm_transmit to fix a timeout hang

Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
    e1000e: Change wthresh to 1 to avoid possible Tx stalls

Brian Norris <computersforpeace@gmail.com>
    mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver

Jan Kara <jack@suse.cz>
    jbd: Fix assertion failure in commit code due to lacking transaction credits

Ondrej Zary <linux@rainbow-software.org>
    mcs7830: Fix link state detection

Jani Nikula <jani.nikula@intel.com>
    drm/i915: use adjusted_mode instead of mode for checking the 6bpc force flag

Ben Skeggs <bskeggs@redhat.com>
    drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB

Kenneth Graunke <kenneth@whitecape.org>
    drm/i915: Set guardband clipping workaround bit in the right register.

Willy Tarreau <w@1wt.eu>
    drm/i915: remove useless BUG_ON which caused a regression in 3.5.

Egbert Eich <eich@suse.de>
    drm/radeon: Don't destroy I2C Bus Rec in radeon_ext_tmds_enc_destroy().

Sasha Levin <sasha.levin@oracle.com>
    fs: prevent use after free in auditing when symlink following was denied

Sasha Levin <sasha.levin@oracle.com>
    fs: handle failed audit_log_start properly

Jean-Christian de Rivaz <jc@eclis.ch>
    Add CDC-ACM support for the CX93010-2x UCMxx USB Modem

Michal Marek <mmarek@suse.cz>
    kbuild: Fix accidental revert in commit fe04ddf

Gabor Juhos <juhosg@openwrt.org>
    MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs

Amerigo Wang <amwang@redhat.com>
    pktgen: fix crash when generating IPv6 packets

Jason Wessel <jason.wessel@windriver.com>
    kdb,vt_console: Fix missed data due to pager overruns

Dan Carpenter <dan.carpenter@oracle.com>
    md/raid10: use correct limit variable

Felix Fietkau <nbd@openwrt.org>
    mac80211: use ieee80211_free_txskb to fix possible skb leaks

Felix Fietkau <nbd@openwrt.org>
    ath9k: use ieee80211_free_txskb

Frederic Weisbecker <fweisbec@gmail.com>
    nohz: Fix one jiffy count too far in idle cputime

Hildner, Christian <christian.hildner@siemens.com>
    timers: Fix endless looping between cascade() and internal_add_timer()

Dan Carpenter <dan.carpenter@oracle.com>
    timekeeping: Cast raw_interval to u64 to avoid shift overflow

Daniel Drake <dsd@laptop.org>
    viafb: don't touch clock state on OLPC XO-1.5

Alexander Holler <holler@ahsoftware.de>
    video/udlfb: fix line counting in fb_write

Matthew Garrett <mjg59@srcf.ucam.org>
    module: taint kernel when lve module is loaded

Ian Kent <raven@themaw.net>
    autofs4 - fix reset pending flag on mount fail

Tejun Heo <tj@kernel.org>
    block: fix request_queue->flags initialization

Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
    xen/bootup: allow read_tscp call for Xen PV guests.

Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
    xen/bootup: allow {read|write}_cr8 pvops call.

Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
    xen/pv-on-hvm kexec: add quirk for Xen 3.4 and shutdown watches.

Alex Williamson <alex.williamson@redhat.com>
    vfio: Fix PCI INTx disable consistency

Alex Williamson <alex.williamson@redhat.com>
    vfio: Move PCI INTx eventfd setting earlier

Roland Dreier <roland@purestorage.com>
    qla2xxx: Fix endianness of task management response code

Nicholas Bellinger <nab@linux-iscsi.org>
    target/file: Re-enable optional fd_buffered_io=1 operation

Peter Senna Tschudin <peter.senna@gmail.com>
    target: fix return code in target_core_init_configfs error path

Paolo Bonzini <pbonzini@redhat.com>
    target: fix truncation of mode data, support zero allocation length

Paolo Bonzini <pbonzini@redhat.com>
    target: support zero allocation length in INQUIRY

Trond Myklebust <Trond.Myklebust@netapp.com>
    SUNRPC: Ensure that the TCP socket is closed when in CLOSE_WAIT

Stefan Richter <stefanr@s5r6.in-berlin.de>
    firewire: cdev: fix user memory corruption (i386 userland on amd64 kernel)

Colin Cross <ccross@android.com>
    ARM: OMAP: counter: add locking to read_persistent_clock

Simon Horman <horms@verge.net.au>
    ARM: 7541/1: Add ARM ERRATA 775420 workaround

Richard W.M. Jones <rjones@redhat.com>
    SCSI: virtio-scsi: initialize scatterlist structure

Lukas Czerner <lczerner@redhat.com>
    SCSI: scsi_debug: Fix off-by-one bug when unmapping region

K. Y. Srinivasan <kys@microsoft.com>
    SCSI: storvsc: Account for in-transit packets in the RESET path

Nicholas Bellinger <nab@linux-iscsi.org>
    iscsi-target: Bump defaults for nopin_timeout + nopin_response_timeout values

Nicholas Bellinger <nab@linux-iscsi.org>
    iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode

Christoph Hellwig <hch@infradead.org>
    iscsit: remove incorrect unlock in iscsit_build_sendtargets_resp

Nicholas Bellinger <nab@linux-iscsi.org>
    iscsi-target: Correctly set 0xffffffff field within ISCSI_OP_REJECT PDU

Hugh Dickins <hughd@google.com>
    tmpfs,ceph,gfs2,isofs,reiserfs,xfs: fix fh_len checking

Jason Wessel <jason.wessel@windriver.com>
    mips,kgdb: fix recursive page fault with CONFIG_KPROBES

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Fix memory leaks at error path in patch_cirrus.c

David Henningsson <david.henningsson@canonical.com>
    ALSA: hda - do not detect jack on internal speakers for Realtek

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Add missing hda_gen_spec to struct via_spec

Feng Tang <feng.tang@intel.com>
    ACPI: EC: Add a quirk for CLEVO M720T/M730T laptop

Feng Tang <feng.tang@intel.com>
    ACPI: EC: Make the GPE storm threshold a module parameter

Stanislav Kinsbursky <skinsbursky@parallels.com>
    lockd: create and use per-net NSM RPC clients on MON/UNMON requests

Stanislav Kinsbursky <skinsbursky@parallels.com>
    lockd: use rpc client's cl_nodename for id encoding

Stanislav Kinsbursky <skinsbursky@parallels.com>
    lockd: per-net NSM client creation and destruction helpers introduced

Malahal Naineni <malahal@us.ibm.com>
    NFSD: pass null terminated buf to kstrtouint()

J. Bruce Fields <bfields@redhat.com>
    nfsd4: fix nfs4 stateid leak

J. Bruce Fields <bfields@redhat.com>
    nfsd4: don't pin clientids to pseudoflavors

Bryan Schumaker <bjschuma@netapp.com>
    NFS: Remove bad delegations during open recovery

Peng Tao <bergwolf@gmail.com>
    NFS41: fix error of setting blocklayoutdriver

Peng Tao <bergwolf@gmail.com>
    pnfsblock: fix partial page buffer wirte

Russell King <rmk+kernel@arm.linux.org.uk>
    ARM: vfp: fix saving d16-d31 vfp registers on v6+ kernels


-------------

Diffstat:

 Makefile                                        |   4 +-
 arch/arm/Kconfig                                |  10 +++++
 arch/arm/include/asm/vfpmacros.h                |   4 +-
 arch/arm/mm/cache-v7.S                          |   3 ++
 arch/arm/plat-omap/counter_32k.c                |  21 ++++++----
 arch/mips/ath79/clock.c                         | 109 ++++++++++++++++++++++++++++++++++++-------------
 arch/mips/include/asm/mach-ath79/ar71xx_regs.h  |  23 +++++++++++
 arch/mips/kernel/kgdb.c                         |   9 ++++
 arch/x86/Makefile                               |   2 +-
 arch/x86/xen/enlighten.c                        |  18 +++++++-
 block/blk-core.c                                |   2 +-
 drivers/acpi/ec.c                               |  30 +++++++++++---
 drivers/char/tpm/tpm.c                          |  21 ++++++----
 drivers/firewire/core-cdev.c                    |   4 +-
 drivers/gpu/drm/i915/i915_gem.c                 |   1 -
 drivers/gpu/drm/i915/i915_reg.h                 |   2 +-
 drivers/gpu/drm/i915/intel_display.c            |   4 +-
 drivers/gpu/drm/i915/intel_pm.c                 |   4 +-
 drivers/gpu/drm/nouveau/nouveau_bios.c          |  22 +++++-----
 drivers/gpu/drm/radeon/radeon_legacy_encoders.c |   6 +--
 drivers/md/raid10.c                             |   2 +-
 drivers/mtd/nand/nand_base.c                    |   8 ++--
 drivers/net/ethernet/intel/e1000e/e1000.h       |   6 +--
 drivers/net/ethernet/intel/e1000e/netdev.c      |   2 +-
 drivers/net/usb/mcs7830.c                       |  30 ++++++++++----
 drivers/net/wireless/ath/ath9k/beacon.c         |   2 +-
 drivers/net/wireless/ath/ath9k/main.c           |   2 +-
 drivers/net/wireless/ath/ath9k/xmit.c           |  53 +++++++++++++-----------
 drivers/scsi/qla2xxx/qla_target.c               |   2 +-
 drivers/scsi/scsi_debug.c                       |   2 +-
 drivers/scsi/storvsc_drv.c                      |   5 +++
 drivers/scsi/virtio_scsi.c                      |   2 +-
 drivers/target/iscsi/iscsi_target.c             |   2 +-
 drivers/target/iscsi/iscsi_target_core.h        |   4 +-
 drivers/target/iscsi/iscsi_target_tpg.c         |  12 ++++++
 drivers/target/target_core_configfs.c           |   8 +++-
 drivers/target/target_core_file.c               |  41 +++++++++++++++++--
 drivers/target/target_core_file.h               |   1 +
 drivers/target/target_core_spc.c                |  48 ++++++----------------
 drivers/tty/vt/vt.c                             |  13 ++++++
 drivers/usb/class/cdc-acm.c                     |   3 ++
 drivers/usb/gadget/at91_udc.c                   |   2 +-
 drivers/vfio/pci/vfio_pci_intrs.c               |  18 ++++++--
 drivers/video/udlfb.c                           |   2 +-
 drivers/video/via/via_clock.c                   |  19 +++++++++
 drivers/xen/xenbus/xenbus_xs.c                  |  21 ++++++++++
 fs/autofs4/root.c                               |   6 ++-
 fs/ceph/export.c                                |  18 ++++++--
 fs/gfs2/export.c                                |   4 ++
 fs/isofs/export.c                               |   2 +-
 fs/jbd/commit.c                                 |  45 +++++++++++++++-----
 fs/jbd/transaction.c                            |  64 ++++++++++++++++++++---------
 fs/lockd/mon.c                                  |  86 ++++++++++++++++++++++++++++++--------
 fs/lockd/netns.h                                |   4 ++
 fs/lockd/svc.c                                  |   1 +
 fs/namei.c                                      |   2 +-
 fs/nfs/blocklayout/blocklayout.c                | 177 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------
 fs/nfs/blocklayout/blocklayout.h                |   1 +
 fs/nfs/client.c                                 |   1 -
 fs/nfs/nfs4proc.c                               |   9 +++-
 fs/nfsd/nfs4idmap.c                             |   2 +-
 fs/nfsd/nfs4state.c                             |  19 ++++++++-
 fs/reiserfs/inode.c                             |   6 ++-
 fs/xfs/xfs_export.c                             |   3 ++
 include/linux/mtd/nand.h                        |   3 --
 kernel/audit.c                                  |   2 +
 kernel/debug/kdb/kdb_io.c                       |  33 ++++++++++++---
 kernel/module.c                                 |   4 ++
 kernel/time/tick-sched.c                        |   2 +-
 kernel/time/timekeeping.c                       |   2 +-
 kernel/timer.c                                  |  10 +++--
 mm/shmem.c                                      |   6 ++-
 net/core/pktgen.c                               |   2 +-
 net/mac80211/status.c                           |   4 +-
 net/mac80211/tx.c                               |  22 +++++-----
 net/sunrpc/xprtsock.c                           |  21 +++++++---
 scripts/Makefile.fwinst                         |   4 +-
 sound/pci/ac97/ac97_codec.c                     |   2 +
 sound/pci/emu10k1/emu10k1_main.c                |   9 ++++
 sound/pci/hda/hda_intel.c                       |  40 +++++++++++-------
 sound/pci/hda/patch_cirrus.c                    |   6 +--
 sound/pci/hda/patch_realtek.c                   |   6 ++-
 sound/pci/hda/patch_via.c                       |   4 ++
 sound/soc/codecs/wm2200.c                       |   3 +-
 sound/soc/omap/omap-abe-twl6040.c               |   2 +-
 sound/soc/sh/fsi.c                              |  15 +++----
 86 files changed, 951 insertions(+), 310 deletions(-)

[ 01/76] ARM: vfp: fix saving d16-d31 vfp registers on v6+ kernels

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King <rmk+kernel@arm.linux.org.uk>

commit 846a136881b8f73c1f74250bf6acfaa309cab1f2 upstream.

Michael Olbrich reported that his test program fails when built with
-O2 -mcpu=cortex-a8 -mfpu=neon, and a kernel which supports v6 and v7
CPUs:

volatile int x = 2;
volatile int64_t y = 2;

int main() {
	volatile int a = 0;
	volatile int64_t b = 0;
	while (1) {
		a = (a + x) % (1 << 30);
		b = (b + y) % (1 << 30);
		assert(a == b);
	}
}

and two instances are run.  When built for just v7 CPUs, this program
works fine.  It uses the "vadd.i64 d19, d18, d16" VFP instruction.

It appears that we do not save the high-16 double VFP registers across
context switches when the kernel is built for v6 CPUs.  Fix that.

Tested-By: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/include/asm/vfpmacros.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm/include/asm/vfpmacros.h
+++ b/arch/arm/include/asm/vfpmacros.h
@@ -28,7 +28,7 @@
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
 	tst	\tmp, #HWCAP_VFPv3D16
-	ldceq	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
 	addne	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
@@ -52,7 +52,7 @@
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
 	tst	\tmp, #HWCAP_VFPv3D16
-	stceq	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
 	addne	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0

[ 02/76] pnfsblock: fix partial page buffer wirte

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peng Tao <bergwolf@gmail.com>

commit fe6e1e8d9fad86873eb74a26e80a8f91f9e870b5 upstream.

If applications use flock to protect its write range, generic NFS
will not do read-modify-write cycle at page cache level. Therefore
LD should know how to handle non-sector aligned writes. Otherwise
there will be data corruption.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/blocklayout/blocklayout.c |  177 ++++++++++++++++++++++++++++++++++++---
 fs/nfs/blocklayout/blocklayout.h |    1 
 2 files changed, 166 insertions(+), 12 deletions(-)

--- a/fs/nfs/blocklayout/blocklayout.c
+++ b/fs/nfs/blocklayout/blocklayout.c
@@ -162,25 +162,39 @@ static struct bio *bl_alloc_init_bio(int
 	return bio;
 }
 
-static struct bio *bl_add_page_to_bio(struct bio *bio, int npg, int rw,
+static struct bio *do_add_page_to_bio(struct bio *bio, int npg, int rw,
 				      sector_t isect, struct page *page,
 				      struct pnfs_block_extent *be,
 				      void (*end_io)(struct bio *, int err),
-				      struct parallel_io *par)
+				      struct parallel_io *par,
+				      unsigned int offset, int len)
 {
+	isect = isect + (offset >> SECTOR_SHIFT);
+	dprintk("%s: npg %d rw %d isect %llu offset %u len %d\n", __func__,
+		npg, rw, (unsigned long long)isect, offset, len);
 retry:
 	if (!bio) {
 		bio = bl_alloc_init_bio(npg, isect, be, end_io, par);
 		if (!bio)
 			return ERR_PTR(-ENOMEM);
 	}
-	if (bio_add_page(bio, page, PAGE_CACHE_SIZE, 0) < PAGE_CACHE_SIZE) {
+	if (bio_add_page(bio, page, len, offset) < len) {
 		bio = bl_submit_bio(rw, bio);
 		goto retry;
 	}
 	return bio;
 }
 
+static struct bio *bl_add_page_to_bio(struct bio *bio, int npg, int rw,
+				      sector_t isect, struct page *page,
+				      struct pnfs_block_extent *be,
+				      void (*end_io)(struct bio *, int err),
+				      struct parallel_io *par)
+{
+	return do_add_page_to_bio(bio, npg, rw, isect, page, be,
+				  end_io, par, 0, PAGE_CACHE_SIZE);
+}
+
 /* This is basically copied from mpage_end_io_read */
 static void bl_end_io_read(struct bio *bio, int err)
 {
@@ -461,6 +475,106 @@ map_block(struct buffer_head *bh, sector
 	return;
 }
 
+static void
+bl_read_single_end_io(struct bio *bio, int error)
+{
+	struct bio_vec *bvec = bio->bi_io_vec + bio->bi_vcnt - 1;
+	struct page *page = bvec->bv_page;
+
+	/* Only one page in bvec */
+	unlock_page(page);
+}
+
+static int
+bl_do_readpage_sync(struct page *page, struct pnfs_block_extent *be,
+		    unsigned int offset, unsigned int len)
+{
+	struct bio *bio;
+	struct page *shadow_page;
+	sector_t isect;
+	char *kaddr, *kshadow_addr;
+	int ret = 0;
+
+	dprintk("%s: offset %u len %u\n", __func__, offset, len);
+
+	shadow_page = alloc_page(GFP_NOFS | __GFP_HIGHMEM);
+	if (shadow_page == NULL)
+		return -ENOMEM;
+
+	bio = bio_alloc(GFP_NOIO, 1);
+	if (bio == NULL)
+		return -ENOMEM;
+
+	isect = (page->index << PAGE_CACHE_SECTOR_SHIFT) +
+		(offset / SECTOR_SIZE);
+
+	bio->bi_sector = isect - be->be_f_offset + be->be_v_offset;
+	bio->bi_bdev = be->be_mdev;
+	bio->bi_end_io = bl_read_single_end_io;
+
+	lock_page(shadow_page);
+	if (bio_add_page(bio, shadow_page,
+			 SECTOR_SIZE, round_down(offset, SECTOR_SIZE)) == 0) {
+		unlock_page(shadow_page);
+		bio_put(bio);
+		return -EIO;
+	}
+
+	submit_bio(READ, bio);
+	wait_on_page_locked(shadow_page);
+	if (unlikely(!test_bit(BIO_UPTODATE, &bio->bi_flags))) {
+		ret = -EIO;
+	} else {
+		kaddr = kmap_atomic(page);
+		kshadow_addr = kmap_atomic(shadow_page);
+		memcpy(kaddr + offset, kshadow_addr + offset, len);
+		kunmap_atomic(kshadow_addr);
+		kunmap_atomic(kaddr);
+	}
+	__free_page(shadow_page);
+	bio_put(bio);
+
+	return ret;
+}
+
+static int
+bl_read_partial_page_sync(struct page *page, struct pnfs_block_extent *be,
+			  unsigned int dirty_offset, unsigned int dirty_len,
+			  bool full_page)
+{
+	int ret = 0;
+	unsigned int start, end;
+
+	if (full_page) {
+		start = 0;
+		end = PAGE_CACHE_SIZE;
+	} else {
+		start = round_down(dirty_offset, SECTOR_SIZE);
+		end = round_up(dirty_offset + dirty_len, SECTOR_SIZE);
+	}
+
+	dprintk("%s: offset %u len %d\n", __func__, dirty_offset, dirty_len);
+	if (!be) {
+		zero_user_segments(page, start, dirty_offset,
+				   dirty_offset + dirty_len, end);
+		if (start == 0 && end == PAGE_CACHE_SIZE &&
+		    trylock_page(page)) {
+			SetPageUptodate(page);
+			unlock_page(page);
+		}
+		return ret;
+	}
+
+	if (start != dirty_offset)
+		ret = bl_do_readpage_sync(page, be, start, dirty_offset - start);
+
+	if (!ret && (dirty_offset + dirty_len < end))
+		ret = bl_do_readpage_sync(page, be, dirty_offset + dirty_len,
+					  end - dirty_offset - dirty_len);
+
+	return ret;
+}
+
 /* Given an unmapped page, zero it or read in page for COW, page is locked
  * by caller.
  */
@@ -494,7 +608,6 @@ init_page_for_write(struct page *page, s
 	SetPageUptodate(page);
 
 cleanup:
-	bl_put_extent(cow_read);
 	if (bh)
 		free_buffer_head(bh);
 	if (ret) {
@@ -566,6 +679,7 @@ bl_write_pagelist(struct nfs_write_data
 	struct parallel_io *par = NULL;
 	loff_t offset = wdata->args.offset;
 	size_t count = wdata->args.count;
+	unsigned int pg_offset, pg_len, saved_len;
 	struct page **pages = wdata->args.pages;
 	struct page *page;
 	pgoff_t index;
@@ -674,10 +788,11 @@ next_page:
 		if (!extent_length) {
 			/* We've used up the previous extent */
 			bl_put_extent(be);
+			bl_put_extent(cow_read);
 			bio = bl_submit_bio(WRITE, bio);
 			/* Get the next one */
 			be = bl_find_get_extent(BLK_LSEG2EXT(header->lseg),
-					     isect, NULL);
+					     isect, &cow_read);
 			if (!be || !is_writable(be, isect)) {
 				header->pnfs_error = -EINVAL;
 				goto out;
@@ -694,7 +809,26 @@ next_page:
 			extent_length = be->be_length -
 			    (isect - be->be_f_offset);
 		}
-		if (be->be_state == PNFS_BLOCK_INVALID_DATA) {
+
+		dprintk("%s offset %lld count %Zu\n", __func__, offset, count);
+		pg_offset = offset & ~PAGE_CACHE_MASK;
+		if (pg_offset + count > PAGE_CACHE_SIZE)
+			pg_len = PAGE_CACHE_SIZE - pg_offset;
+		else
+			pg_len = count;
+
+		saved_len = pg_len;
+		if (be->be_state == PNFS_BLOCK_INVALID_DATA &&
+		    !bl_is_sector_init(be->be_inval, isect)) {
+			ret = bl_read_partial_page_sync(pages[i], cow_read,
+							pg_offset, pg_len, true);
+			if (ret) {
+				dprintk("%s bl_read_partial_page_sync fail %d\n",
+					__func__, ret);
+				header->pnfs_error = ret;
+				goto out;
+			}
+
 			ret = bl_mark_sectors_init(be->be_inval, isect,
 						       PAGE_CACHE_SECTORS);
 			if (unlikely(ret)) {
@@ -703,15 +837,35 @@ next_page:
 				header->pnfs_error = ret;
 				goto out;
 			}
+
+			/* Expand to full page write */
+			pg_offset = 0;
+			pg_len = PAGE_CACHE_SIZE;
+		} else if  ((pg_offset & (SECTOR_SIZE - 1)) ||
+			    (pg_len & (SECTOR_SIZE - 1))){
+			/* ahh, nasty case. We have to do sync full sector
+			 * read-modify-write cycles.
+			 */
+			unsigned int saved_offset = pg_offset;
+			ret = bl_read_partial_page_sync(pages[i], be, pg_offset,
+							pg_len, false);
+			pg_offset = round_down(pg_offset, SECTOR_SIZE);
+			pg_len = round_up(saved_offset + pg_len, SECTOR_SIZE)
+				 - pg_offset;
 		}
-		bio = bl_add_page_to_bio(bio, wdata->pages.npages - i, WRITE,
+
+
+		bio = do_add_page_to_bio(bio, wdata->pages.npages - i, WRITE,
 					 isect, pages[i], be,
-					 bl_end_io_write, par);
+					 bl_end_io_write, par,
+					 pg_offset, pg_len);
 		if (IS_ERR(bio)) {
 			header->pnfs_error = PTR_ERR(bio);
 			bio = NULL;
 			goto out;
 		}
+		offset += saved_len;
+		count -= saved_len;
 		isect += PAGE_CACHE_SECTORS;
 		last_isect = isect;
 		extent_length -= PAGE_CACHE_SECTORS;
@@ -729,17 +883,16 @@ next_page:
 	}
 
 write_done:
-	wdata->res.count = (last_isect << SECTOR_SHIFT) - (offset);
-	if (count < wdata->res.count) {
-		wdata->res.count = count;
-	}
+	wdata->res.count = wdata->args.count;
 out:
 	bl_put_extent(be);
+	bl_put_extent(cow_read);
 	bl_submit_bio(WRITE, bio);
 	put_parallel(par);
 	return PNFS_ATTEMPTED;
 out_mds:
 	bl_put_extent(be);
+	bl_put_extent(cow_read);
 	kfree(par);
 	return PNFS_NOT_ATTEMPTED;
 }
--- a/fs/nfs/blocklayout/blocklayout.h
+++ b/fs/nfs/blocklayout/blocklayout.h
@@ -41,6 +41,7 @@
 
 #define PAGE_CACHE_SECTORS (PAGE_CACHE_SIZE >> SECTOR_SHIFT)
 #define PAGE_CACHE_SECTOR_SHIFT (PAGE_CACHE_SHIFT - SECTOR_SHIFT)
+#define SECTOR_SIZE (1 << SECTOR_SHIFT)
 
 struct block_mount_id {
 	spinlock_t			bm_lock;    /* protects list */

[ 03/76] NFS41: fix error of setting blocklayoutdriver

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peng Tao <bergwolf@gmail.com>

commit dc182549d439f60c332bf74d7f220a1bccf37da6 upstream.

After commit e38eb650 (NFS: set_pnfs_layoutdriver() from
nfs4_proc_fsinfo()), set_pnfs_layoutdriver() is called inside
nfs4_proc_fsinfo(), but pnfs_blksize is not set. It causes setting
blocklayoutdriver failure and pnfsblock mount failure.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/client.c   |    1 -
 fs/nfs/nfs4proc.c |    5 ++++-
 2 files changed, 4 insertions(+), 2 deletions(-)

--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -855,7 +855,6 @@ static void nfs_server_set_fsinfo(struct
 	if (server->wsize > NFS_MAX_FILE_IO_SIZE)
 		server->wsize = NFS_MAX_FILE_IO_SIZE;
 	server->wpages = (server->wsize + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
-	server->pnfs_blksize = fsinfo->blksize;
 
 	server->wtmult = nfs_block_bits(fsinfo->wtmult, NULL);
 
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -3362,8 +3362,11 @@ static int nfs4_proc_fsinfo(struct nfs_s
 
 	nfs_fattr_init(fsinfo->fattr);
 	error = nfs4_do_fsinfo(server, fhandle, fsinfo);
-	if (error == 0)
+	if (error == 0) {
+		/* block layout checks this! */
+		server->pnfs_blksize = fsinfo->blksize;
 		set_pnfs_layoutdriver(server, fhandle, fsinfo->layouttype);
+	}
 
 	return error;
 }

[ 04/76] NFS: Remove bad delegations during open recovery

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bryan Schumaker <bjschuma@netapp.com>

commit 6938867edba929a65a167a97581231e76aeb10b4 upstream.

I put the client into an open recovery loop by:
	Client: Open file
		read half
	Server: Expire client (echo 0 > /sys/kernel/debug/nfsd/forget_clients)
	Client: Drop vm cache (echo 3 > /proc/sys/vm/drop_caches)
		finish reading file

This causes a loop because the client never updates the nfs4_state after
discovering that the delegation is invalid.  This means it will keep
trying to read using the bad delegation rather than attempting to re-open
the file.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4proc.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -1774,7 +1774,11 @@ static void nfs41_clear_delegation_state
 		 * informs us the stateid is unrecognized. */
 		if (status != -NFS4ERR_BAD_STATEID)
 			nfs41_free_stateid(server, stateid);
+		nfs_remove_bad_delegation(state->inode);
 
+		write_seqlock(&state->seqlock);
+		nfs4_stateid_copy(&state->stateid, &state->open_stateid);
+		write_sequnlock(&state->seqlock);
 		clear_bit(NFS_DELEGATED_STATE, &state->flags);
 	}
 }

[ 05/76] nfsd4: dont pin clientids to pseudoflavors

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "J. Bruce Fields" <bfields@redhat.com>

commit 68eb35081e297b37db49d854cda144c6a3397699 upstream.

I added cr_flavor to the data compared in same_creds without any
justification, in d5497fc693a446ce9100fcf4117c3f795ddfd0d2 "nfsd4: move
rq_flavor into svc_cred".

Recent client changes then started making

	mount -osec=krb5 server:/export /mnt/
	echo "hello" >/mnt/TMP
	umount /mnt/
	mount -osec=krb5i server:/export /mnt/
	echo "hello" >/mnt/TMP

to fail due to a clid_inuse on the second open.

Mounting sequentially like this with different flavors probably isn't
that common outside artificial tests.  Also, the real bug here may be
that the server isn't just destroying the former clientid in this case
(because it isn't good enough at recognizing when the old state is
gone).  But it prompted some discussion and a look back at the spec, and
I think the check was probably wrong.  Fix and document.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfsd/nfs4state.c |   18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -1223,10 +1223,26 @@ static bool groups_equal(struct group_in
 	return true;
 }
 
+/*
+ * RFC 3530 language requires clid_inuse be returned when the
+ * "principal" associated with a requests differs from that previously
+ * used.  We use uid, gid's, and gss principal string as our best
+ * approximation.  We also don't want to allow non-gss use of a client
+ * established using gss: in theory cr_principal should catch that
+ * change, but in practice cr_principal can be null even in the gss case
+ * since gssd doesn't always pass down a principal string.
+ */
+static bool is_gss_cred(struct svc_cred *cr)
+{
+	/* Is cr_flavor one of the gss "pseudoflavors"?: */
+	return (cr->cr_flavor > RPC_AUTH_MAXFLAVOR);
+}
+
+
 static bool
 same_creds(struct svc_cred *cr1, struct svc_cred *cr2)
 {
-	if ((cr1->cr_flavor != cr2->cr_flavor)
+	if ((is_gss_cred(cr1) != is_gss_cred(cr2))
 		|| (cr1->cr_uid != cr2->cr_uid)
 		|| (cr1->cr_gid != cr2->cr_gid)
 		|| !groups_equal(cr1->cr_group_info, cr2->cr_group_info))

[ 06/76] nfsd4: fix nfs4 stateid leak

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "J. Bruce Fields" <bfields@redhat.com>

commit cf9182e90b2af04245ac4fae497fe73fc71285b4 upstream.

Processes that open and close multiple files may end up setting this
oo_last_closed_stid without freeing what was previously pointed to.
This can result in a major leak, visible for example by watching the
nfsd4_stateids line of /proc/slabinfo.

Reported-by: Cyril B. <cbay@excellency.fr>
Tested-by: Cyril B. <cbay@excellency.fr>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfsd/nfs4state.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -3782,6 +3782,7 @@ nfsd4_close(struct svc_rqst *rqstp, stru
 	memcpy(&close->cl_stateid, &stp->st_stid.sc_stateid, sizeof(stateid_t));
 
 	nfsd4_close_open_stateid(stp);
+	release_last_closed_stateid(oo);
 	oo->oo_last_closed_stid = stp;
 
 	if (list_empty(&oo->oo_owner.so_stateids)) {

[ 07/76] NFSD: pass null terminated buf to kstrtouint()

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Malahal Naineni <malahal@us.ibm.com>

commit 9959ba0c241a71c7ed8133401cfbbee2720da0b5 upstream.

The 'buf' is prepared with null termination with intention of using it for
this purpose, but 'name' is passed instead!

Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfsd/nfs4idmap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfsd/nfs4idmap.c
+++ b/fs/nfsd/nfs4idmap.c
@@ -598,7 +598,7 @@ numeric_name_to_id(struct svc_rqst *rqst
 	/* Just to make sure it's null-terminated: */
 	memcpy(buf, name, namelen);
 	buf[namelen] = '\0';
-	ret = kstrtouint(name, 10, id);
+	ret = kstrtouint(buf, 10, id);
 	return ret == 0;
 }
 

[ 08/76] lockd: per-net NSM client creation and destruction helpers introduced

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislav Kinsbursky <skinsbursky@parallels.com>

commit e9406db20fecbfcab646bad157b4cfdc7cadddfb upstream.

NSM RPC client can be required on NFSv3 umount, when child reaper is dying (and
destroying it's mount namespace). It means, that current nsproxy is set to
NULL already, but creation of RPC client requires UTS namespace for gaining
hostname string.
This patch introduces reference counted NFS RPC clients creation and
destruction helpers (similar to RPCBIND RPC clients).

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/lockd/mon.c   |   51 +++++++++++++++++++++++++++++++++++++++++++++++++--
 fs/lockd/netns.h |    4 ++++
 fs/lockd/svc.c   |    1 +
 3 files changed, 54 insertions(+), 2 deletions(-)

--- a/fs/lockd/mon.c
+++ b/fs/lockd/mon.c
@@ -19,6 +19,8 @@
 
 #include <asm/unaligned.h>
 
+#include "netns.h"
+
 #define NLMDBG_FACILITY		NLMDBG_MONITOR
 #define NSM_PROGRAM		100024
 #define NSM_VERSION		1
@@ -70,7 +72,7 @@ static struct rpc_clnt *nsm_create(struc
 	};
 	struct rpc_create_args args = {
 		.net			= net,
-		.protocol		= XPRT_TRANSPORT_UDP,
+		.protocol		= XPRT_TRANSPORT_TCP,
 		.address		= (struct sockaddr *)&sin,
 		.addrsize		= sizeof(sin),
 		.servername		= "rpc.statd",
@@ -83,6 +85,51 @@ static struct rpc_clnt *nsm_create(struc
 	return rpc_create(&args);
 }
 
+__maybe_unused static struct rpc_clnt *nsm_client_get(struct net *net)
+{
+	static DEFINE_MUTEX(nsm_create_mutex);
+	struct rpc_clnt	*clnt;
+	struct lockd_net *ln = net_generic(net, lockd_net_id);
+
+	spin_lock(&ln->nsm_clnt_lock);
+	if (ln->nsm_users) {
+		ln->nsm_users++;
+		clnt = ln->nsm_clnt;
+		spin_unlock(&ln->nsm_clnt_lock);
+		goto out;
+	}
+	spin_unlock(&ln->nsm_clnt_lock);
+
+	mutex_lock(&nsm_create_mutex);
+	clnt = nsm_create(net);
+	if (!IS_ERR(clnt)) {
+		ln->nsm_clnt = clnt;
+		smp_wmb();
+		ln->nsm_users = 1;
+	}
+	mutex_unlock(&nsm_create_mutex);
+out:
+	return clnt;
+}
+
+__maybe_unused static void nsm_client_put(struct net *net)
+{
+	struct lockd_net *ln = net_generic(net, lockd_net_id);
+	struct rpc_clnt	*clnt = ln->nsm_clnt;
+	int shutdown = 0;
+
+	spin_lock(&ln->nsm_clnt_lock);
+	if (ln->nsm_users) {
+		if (--ln->nsm_users)
+			ln->nsm_clnt = NULL;
+		shutdown = !ln->nsm_users;
+	}
+	spin_unlock(&ln->nsm_clnt_lock);
+
+	if (shutdown)
+		rpc_shutdown_client(clnt);
+}
+
 static int nsm_mon_unmon(struct nsm_handle *nsm, u32 proc, struct nsm_res *res,
 			 struct net *net)
 {
@@ -111,7 +158,7 @@ static int nsm_mon_unmon(struct nsm_hand
 	memset(res, 0, sizeof(*res));
 
 	msg.rpc_proc = &clnt->cl_procinfo[proc];
-	status = rpc_call_sync(clnt, &msg, 0);
+	status = rpc_call_sync(clnt, &msg, RPC_TASK_SOFTCONN);
 	if (status < 0)
 		dprintk("lockd: NSM upcall RPC failed, status=%d\n",
 				status);
--- a/fs/lockd/netns.h
+++ b/fs/lockd/netns.h
@@ -12,6 +12,10 @@ struct lockd_net {
 	struct delayed_work grace_period_end;
 	struct lock_manager lockd_manager;
 	struct list_head grace_list;
+
+	spinlock_t nsm_clnt_lock;
+	unsigned int nsm_users;
+	struct rpc_clnt *nsm_clnt;
 };
 
 extern int lockd_net_id;
--- a/fs/lockd/svc.c
+++ b/fs/lockd/svc.c
@@ -596,6 +596,7 @@ static int lockd_init_net(struct net *ne
 
 	INIT_DELAYED_WORK(&ln->grace_period_end, grace_ender);
 	INIT_LIST_HEAD(&ln->grace_list);
+	spin_lock_init(&ln->nsm_clnt_lock);
 	return 0;
 }
 

[ 09/76] lockd: use rpc clients cl_nodename for id encoding

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislav Kinsbursky <skinsbursky@parallels.com>

commit 303a7ce92064c285a04c870f2dc0192fdb2968cb upstream.

Taking hostname from uts namespace if not safe, because this cuold be
performind during umount operation on child reaper death. And in this case
current->nsproxy is NULL already.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/lockd/mon.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/lockd/mon.c
+++ b/fs/lockd/mon.c
@@ -42,6 +42,7 @@ struct nsm_args {
 	u32			proc;
 
 	char			*mon_name;
+	char			*nodename;
 };
 
 struct nsm_res {
@@ -141,6 +142,7 @@ static int nsm_mon_unmon(struct nsm_hand
 		.vers		= 3,
 		.proc		= NLMPROC_NSM_NOTIFY,
 		.mon_name	= nsm->sm_mon_name,
+		.nodename	= utsname()->nodename,
 	};
 	struct rpc_message msg = {
 		.rpc_argp	= &args,
@@ -477,7 +479,7 @@ static void encode_my_id(struct xdr_stre
 {
 	__be32 *p;
 
-	encode_nsm_string(xdr, utsname()->nodename);
+	encode_nsm_string(xdr, argp->nodename);
 	p = xdr_reserve_space(xdr, 4 + 4 + 4);
 	*p++ = cpu_to_be32(argp->prog);
 	*p++ = cpu_to_be32(argp->vers);

[ 10/76] lockd: create and use per-net NSM RPC clients on MON/UNMON requests

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislav Kinsbursky <skinsbursky@parallels.com>

commit cb7323fffa85df37161f4d3be45e1f787808309c upstream.

NSM RPC client can be required on NFSv3 umount, when child reaper is dying
(and destroying it's mount namespace). It means, that current nsproxy is set
to NULL already, but creation of RPC client requires UTS namespace for gaining
hostname string.

This patch creates reference-counted per-net NSM client on first monitor
request and destroys it after last unmonitor request.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/lockd/mon.c |   37 ++++++++++++++++++++-----------------
 1 file changed, 20 insertions(+), 17 deletions(-)

--- a/fs/lockd/mon.c
+++ b/fs/lockd/mon.c
@@ -7,7 +7,6 @@
  */
 
 #include <linux/types.h>
-#include <linux/utsname.h>
 #include <linux/kernel.h>
 #include <linux/ktime.h>
 #include <linux/slab.h>
@@ -86,7 +85,7 @@ static struct rpc_clnt *nsm_create(struc
 	return rpc_create(&args);
 }
 
-__maybe_unused static struct rpc_clnt *nsm_client_get(struct net *net)
+static struct rpc_clnt *nsm_client_get(struct net *net)
 {
 	static DEFINE_MUTEX(nsm_create_mutex);
 	struct rpc_clnt	*clnt;
@@ -113,7 +112,7 @@ out:
 	return clnt;
 }
 
-__maybe_unused static void nsm_client_put(struct net *net)
+static void nsm_client_put(struct net *net)
 {
 	struct lockd_net *ln = net_generic(net, lockd_net_id);
 	struct rpc_clnt	*clnt = ln->nsm_clnt;
@@ -132,9 +131,8 @@ __maybe_unused static void nsm_client_pu
 }
 
 static int nsm_mon_unmon(struct nsm_handle *nsm, u32 proc, struct nsm_res *res,
-			 struct net *net)
+			 struct rpc_clnt *clnt)
 {
-	struct rpc_clnt	*clnt;
 	int		status;
 	struct nsm_args args = {
 		.priv		= &nsm->sm_priv,
@@ -142,20 +140,14 @@ static int nsm_mon_unmon(struct nsm_hand
 		.vers		= 3,
 		.proc		= NLMPROC_NSM_NOTIFY,
 		.mon_name	= nsm->sm_mon_name,
-		.nodename	= utsname()->nodename,
+		.nodename	= clnt->cl_nodename,
 	};
 	struct rpc_message msg = {
 		.rpc_argp	= &args,
 		.rpc_resp	= res,
 	};
 
-	clnt = nsm_create(net);
-	if (IS_ERR(clnt)) {
-		status = PTR_ERR(clnt);
-		dprintk("lockd: failed to create NSM upcall transport, "
-				"status=%d\n", status);
-		goto out;
-	}
+	BUG_ON(clnt == NULL);
 
 	memset(res, 0, sizeof(*res));
 
@@ -166,8 +158,6 @@ static int nsm_mon_unmon(struct nsm_hand
 				status);
 	else
 		status = 0;
-	rpc_shutdown_client(clnt);
- out:
 	return status;
 }
 
@@ -187,6 +177,7 @@ int nsm_monitor(const struct nlm_host *h
 	struct nsm_handle *nsm = host->h_nsmhandle;
 	struct nsm_res	res;
 	int		status;
+	struct rpc_clnt *clnt;
 
 	dprintk("lockd: nsm_monitor(%s)\n", nsm->sm_name);
 
@@ -199,7 +190,15 @@ int nsm_monitor(const struct nlm_host *h
 	 */
 	nsm->sm_mon_name = nsm_use_hostnames ? nsm->sm_name : nsm->sm_addrbuf;
 
-	status = nsm_mon_unmon(nsm, NSMPROC_MON, &res, host->net);
+	clnt = nsm_client_get(host->net);
+	if (IS_ERR(clnt)) {
+		status = PTR_ERR(clnt);
+		dprintk("lockd: failed to create NSM upcall transport, "
+				"status=%d, net=%p\n", status, host->net);
+		return status;
+	}
+
+	status = nsm_mon_unmon(nsm, NSMPROC_MON, &res, clnt);
 	if (unlikely(res.status != 0))
 		status = -EIO;
 	if (unlikely(status < 0)) {
@@ -231,9 +230,11 @@ void nsm_unmonitor(const struct nlm_host
 
 	if (atomic_read(&nsm->sm_count) == 1
 	 && nsm->sm_monitored && !nsm->sm_sticky) {
+		struct lockd_net *ln = net_generic(host->net, lockd_net_id);
+
 		dprintk("lockd: nsm_unmonitor(%s)\n", nsm->sm_name);
 
-		status = nsm_mon_unmon(nsm, NSMPROC_UNMON, &res, host->net);
+		status = nsm_mon_unmon(nsm, NSMPROC_UNMON, &res, ln->nsm_clnt);
 		if (res.status != 0)
 			status = -EIO;
 		if (status < 0)
@@ -241,6 +242,8 @@ void nsm_unmonitor(const struct nlm_host
 					nsm->sm_name);
 		else
 			nsm->sm_monitored = 0;
+
+		nsm_client_put(host->net);
 	}
 }
 

[ 11/76] ACPI: EC: Make the GPE storm threshold a module parameter

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Feng Tang <feng.tang@intel.com>

commit a520d52e99b14ba7db135e916348f12f2a6e09be upstream.

The Linux EC driver includes a mechanism to detect GPE storms,
and switch from interrupt-mode to polling mode.  However, polling
mode sometimes doesn't work, so the workaround is problematic.
Also, different systems seem to need the threshold for detecting
the GPE storm at different levels.

ACPI_EC_STORM_THRESHOLD was initially 20 when it's created, and
was changed to 8 in 2.6.28 commit 06cf7d3c7 "ACPI: EC: lower interrupt storm
threshold" to fix kernel bug 11892 by forcing the laptop in that bug to
work in polling mode. However in bug 45151, it works fine in interrupt
mode if we lift the threshold back to 20.

This patch makes the threshold a module parameter so that user has a
flexible option to debug/workaround this issue.

The default is unchanged.

This is also a preparation patch to fix specific systems:
	https://bugzilla.kernel.org/show_bug.cgi?id=45151

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/ec.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -71,9 +71,6 @@ enum ec_command {
 #define ACPI_EC_UDELAY_GLK	1000	/* Wait 1ms max. to get global lock */
 #define ACPI_EC_MSI_UDELAY	550	/* Wait 550us for MSI EC */
 
-#define ACPI_EC_STORM_THRESHOLD 8	/* number of false interrupts
-					   per one transaction */
-
 enum {
 	EC_FLAGS_QUERY_PENDING,		/* Query is pending */
 	EC_FLAGS_GPE_STORM,		/* GPE storm detected */
@@ -87,6 +84,15 @@ static unsigned int ec_delay __read_most
 module_param(ec_delay, uint, 0644);
 MODULE_PARM_DESC(ec_delay, "Timeout(ms) waited until an EC command completes");
 
+/*
+ * If the number of false interrupts per one transaction exceeds
+ * this threshold, will think there is a GPE storm happened and
+ * will disable the GPE for normal transaction.
+ */
+static unsigned int ec_storm_threshold  __read_mostly = 8;
+module_param(ec_storm_threshold, uint, 0644);
+MODULE_PARM_DESC(ec_storm_threshold, "Maxim false GPE numbers not considered as GPE storm");
+
 /* If we find an EC via the ECDT, we need to keep a ptr to its context */
 /* External interfaces use first EC only, so remember */
 typedef int (*acpi_ec_query_func) (void *data);
@@ -319,7 +325,7 @@ static int acpi_ec_transaction(struct ac
 		msleep(1);
 		/* It is safe to enable the GPE outside of the transaction. */
 		acpi_enable_gpe(NULL, ec->gpe);
-	} else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) {
+	} else if (t->irq_count > ec_storm_threshold) {
 		pr_info(PREFIX "GPE storm detected, "
 			"transactions will use polling mode\n");
 		set_bit(EC_FLAGS_GPE_STORM, &ec->flags);

[ 12/76] ACPI: EC: Add a quirk for CLEVO M720T/M730T laptop

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Feng Tang <feng.tang@intel.com>

commit 67bfa9b60bd689601554526d144b21d529f78a09 upstream.

By enlarging the GPE storm threshold back to 20, that laptop's
EC works fine with interrupt mode instead of polling mode.

https://bugzilla.kernel.org/show_bug.cgi?id=45151

Reported-and-Tested-by: Francesco <trentini@dei.unipd.it>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/ec.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -930,6 +930,17 @@ static int ec_flag_msi(const struct dmi_
 	return 0;
 }
 
+/*
+ * Clevo M720 notebook actually works ok with IRQ mode, if we lifted
+ * the GPE storm threshold back to 20
+ */
+static int ec_enlarge_storm_threshold(const struct dmi_system_id *id)
+{
+	pr_debug("Setting the EC GPE storm threshold to 20\n");
+	ec_storm_threshold  = 20;
+	return 0;
+}
+
 static struct dmi_system_id __initdata ec_dmi_table[] = {
 	{
 	ec_skip_dsdt_scan, "Compal JFL92", {
@@ -961,10 +972,13 @@ static struct dmi_system_id __initdata e
 	{
 	ec_validate_ecdt, "ASUS hardware", {
 	DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc.") }, NULL},
+	{
+	ec_enlarge_storm_threshold, "CLEVO hardware", {
+	DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."),
+	DMI_MATCH(DMI_PRODUCT_NAME, "M720T/M730T"),}, NULL},
 	{},
 };
 
-
 int __init acpi_ec_ecdt_probe(void)
 {
 	acpi_status status;

[ 13/76] ALSA: hda - Add missing hda_gen_spec to struct via_spec

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 7819d1c70eb6a57e43554d86e10b39d1e106ed65 upstream.

The commit [4b527b65 ALSA: hda - limit internal mic boost for Asus
X202E] introduced the use of auto-parser code, but it forgot to add
struct hda_gen_spec at the head of codec->spec which the auto-parser
assumes silently.  Without this record, it may result in memory
corruption.

This patch adds the missing piece.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_via.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -118,6 +118,8 @@ enum {
 };
 
 struct via_spec {
+	struct hda_gen_spec gen;
+
 	/* codec parameterization */
 	const struct snd_kcontrol_new *mixers[6];
 	unsigned int num_mixers;
@@ -246,6 +248,7 @@ static struct via_spec * via_new_spec(st
 	/* VT1708BCE & VT1708S are almost same */
 	if (spec->codec_type == VT1708BCE)
 		spec->codec_type = VT1708S;
+	snd_hda_gen_init(&spec->gen);
 	return spec;
 }
 
@@ -1628,6 +1631,7 @@ static void via_free(struct hda_codec *c
 	vt1708_stop_hp_work(spec);
 	kfree(spec->bind_cap_vol);
 	kfree(spec->bind_cap_sw);
+	snd_hda_gen_free(&spec->gen);
 	kfree(spec);
 }
 

[ 14/76] ALSA: hda - do not detect jack on internal speakers for Realtek

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Henningsson <david.henningsson@canonical.com>

commit f7f4b2322bf7b8c5929b7eb5a667091f32592580 upstream.

This caused the internal speaker to mute itself because it was
present, which happened after powersave.
It was found on Dell XPS 15 (L502x), ALC665.

Reported-by: Da Fox <da.fox.mail@gmail.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -611,6 +611,8 @@ static void alc_line_automute(struct hda
 {
 	struct alc_spec *spec = codec->spec;
 
+	if (spec->autocfg.line_out_type == AUTO_PIN_SPEAKER_OUT)
+		return;
 	/* check LO jack only when it's different from HP */
 	if (spec->autocfg.line_out_pins[0] == spec->autocfg.hp_pins[0])
 		return;

[ 15/76] ALSA: hda - Fix memory leaks at error path in patch_cirrus.c

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit c5e0b6dbad9b4d18c561af90b384d02373f1c994 upstream.

The proper destructor should be called at the error path.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_cirrus.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -1417,7 +1417,7 @@ static int patch_cs420x(struct hda_codec
 	return 0;
 
  error:
-	kfree(codec->spec);
+	cs_free(codec);
 	codec->spec = NULL;
 	return err;
 }
@@ -1974,7 +1974,7 @@ static int patch_cs4210(struct hda_codec
 	return 0;
 
  error:
-	kfree(codec->spec);
+	cs_free(codec);
 	codec->spec = NULL;
 	return err;
 }
@@ -1999,7 +1999,7 @@ static int patch_cs4213(struct hda_codec
 	return 0;
 
  error:
-	kfree(codec->spec);
+	cs_free(codec);
 	codec->spec = NULL;
 	return err;
 }

[ 16/76] mips,kgdb: fix recursive page fault with CONFIG_KPROBES

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Wessel <jason.wessel@windriver.com>

commit f0a996eeeda214f4293e234df33b29bec003b536 upstream.

This fault was detected using the kgdb test suite on boot and it
crashes recursively due to the fact that CONFIG_KPROBES on mips adds
an extra die notifier in the page fault handler.  The crash signature
looks like this:

kgdbts:RUN bad memory access test
KGDB: re-enter exception: ALL breakpoints killed
Call Trace:
[<807b7548>] dump_stack+0x20/0x54
[<807b7548>] dump_stack+0x20/0x54

The fix for now is to have kgdb return immediately if the fault type
is DIE_PAGE_FAULT and allow the kprobe code to decide what is supposed
to happen.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/kgdb.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -283,6 +283,15 @@ static int kgdb_mips_notify(struct notif
 	struct pt_regs *regs = args->regs;
 	int trap = (regs->cp0_cause & 0x7c) >> 2;
 
+#ifdef CONFIG_KPROBES
+	/*
+	 * Return immediately if the kprobes fault notifier has set
+	 * DIE_PAGE_FAULT.
+	 */
+	if (cmd == DIE_PAGE_FAULT)
+		return NOTIFY_DONE;
+#endif /* CONFIG_KPROBES */
+
 	/* Userspace events, ignore. */
 	if (user_mode(regs))
 		return NOTIFY_DONE;

[ 17/76] tmpfs,ceph,gfs2,isofs,reiserfs,xfs: fix fh_len checking

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hugh Dickins <hughd@google.com>

commit 35c2a7f4908d404c9124c2efc6ada4640ca4d5d5 upstream.

Fuzzing with trinity oopsed on the 1st instruction of shmem_fh_to_dentry(),
	u64 inum = fid->raw[2];
which is unhelpfully reported as at the end of shmem_alloc_inode():

BUG: unable to handle kernel paging request at ffff880061cd3000
IP: [<ffffffff812190d0>] shmem_alloc_inode+0x40/0x40
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Call Trace:
 [<ffffffff81488649>] ? exportfs_decode_fh+0x79/0x2d0
 [<ffffffff812d77c3>] do_handle_open+0x163/0x2c0
 [<ffffffff812d792c>] sys_open_by_handle_at+0xc/0x10
 [<ffffffff83a5f3f8>] tracesys+0xe1/0xe6

Right, tmpfs is being stupid to access fid->raw[2] before validating that
fh_len includes it: the buffer kmalloc'ed by do_sys_name_to_handle() may
fall at the end of a page, and the next page not be present.

But some other filesystems (ceph, gfs2, isofs, reiserfs, xfs) are being
careless about fh_len too, in fh_to_dentry() and/or fh_to_parent(), and
could oops in the same way: add the missing fh_len checks to those.

Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Sage Weil <sage@inktank.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ceph/export.c    |   18 ++++++++++++++----
 fs/gfs2/export.c    |    4 ++++
 fs/isofs/export.c   |    2 +-
 fs/reiserfs/inode.c |    6 +++++-
 fs/xfs/xfs_export.c |    3 +++
 mm/shmem.c          |    6 ++++--
 6 files changed, 31 insertions(+), 8 deletions(-)

--- a/fs/ceph/export.c
+++ b/fs/ceph/export.c
@@ -99,7 +99,7 @@ static int ceph_encode_fh(struct inode *
  * FIXME: we should try harder by querying the mds for the ino.
  */
 static struct dentry *__fh_to_dentry(struct super_block *sb,
-				     struct ceph_nfs_fh *fh)
+				     struct ceph_nfs_fh *fh, int fh_len)
 {
 	struct ceph_mds_client *mdsc = ceph_sb_to_client(sb)->mdsc;
 	struct inode *inode;
@@ -107,6 +107,9 @@ static struct dentry *__fh_to_dentry(str
 	struct ceph_vino vino;
 	int err;
 
+	if (fh_len < sizeof(*fh) / 4)
+		return ERR_PTR(-ESTALE);
+
 	dout("__fh_to_dentry %llx\n", fh->ino);
 	vino.ino = fh->ino;
 	vino.snap = CEPH_NOSNAP;
@@ -150,7 +153,7 @@ static struct dentry *__fh_to_dentry(str
  * convert connectable fh to dentry
  */
 static struct dentry *__cfh_to_dentry(struct super_block *sb,
-				      struct ceph_nfs_confh *cfh)
+				      struct ceph_nfs_confh *cfh, int fh_len)
 {
 	struct ceph_mds_client *mdsc = ceph_sb_to_client(sb)->mdsc;
 	struct inode *inode;
@@ -158,6 +161,9 @@ static struct dentry *__cfh_to_dentry(st
 	struct ceph_vino vino;
 	int err;
 
+	if (fh_len < sizeof(*cfh) / 4)
+		return ERR_PTR(-ESTALE);
+
 	dout("__cfh_to_dentry %llx (%llx/%x)\n",
 	     cfh->ino, cfh->parent_ino, cfh->parent_name_hash);
 
@@ -207,9 +213,11 @@ static struct dentry *ceph_fh_to_dentry(
 					int fh_len, int fh_type)
 {
 	if (fh_type == 1)
-		return __fh_to_dentry(sb, (struct ceph_nfs_fh *)fid->raw);
+		return __fh_to_dentry(sb, (struct ceph_nfs_fh *)fid->raw,
+								fh_len);
 	else
-		return __cfh_to_dentry(sb, (struct ceph_nfs_confh *)fid->raw);
+		return __cfh_to_dentry(sb, (struct ceph_nfs_confh *)fid->raw,
+								fh_len);
 }
 
 /*
@@ -230,6 +238,8 @@ static struct dentry *ceph_fh_to_parent(
 
 	if (fh_type == 1)
 		return ERR_PTR(-ESTALE);
+	if (fh_len < sizeof(*cfh) / 4)
+		return ERR_PTR(-ESTALE);
 
 	pr_debug("fh_to_parent %llx/%d\n", cfh->parent_ino,
 		 cfh->parent_name_hash);
--- a/fs/gfs2/export.c
+++ b/fs/gfs2/export.c
@@ -161,6 +161,8 @@ static struct dentry *gfs2_fh_to_dentry(
 	case GFS2_SMALL_FH_SIZE:
 	case GFS2_LARGE_FH_SIZE:
 	case GFS2_OLD_FH_SIZE:
+		if (fh_len < GFS2_SMALL_FH_SIZE)
+			return NULL;
 		this.no_formal_ino = ((u64)be32_to_cpu(fh[0])) << 32;
 		this.no_formal_ino |= be32_to_cpu(fh[1]);
 		this.no_addr = ((u64)be32_to_cpu(fh[2])) << 32;
@@ -180,6 +182,8 @@ static struct dentry *gfs2_fh_to_parent(
 	switch (fh_type) {
 	case GFS2_LARGE_FH_SIZE:
 	case GFS2_OLD_FH_SIZE:
+		if (fh_len < GFS2_LARGE_FH_SIZE)
+			return NULL;
 		parent.no_formal_ino = ((u64)be32_to_cpu(fh[4])) << 32;
 		parent.no_formal_ino |= be32_to_cpu(fh[5]);
 		parent.no_addr = ((u64)be32_to_cpu(fh[6])) << 32;
--- a/fs/isofs/export.c
+++ b/fs/isofs/export.c
@@ -175,7 +175,7 @@ static struct dentry *isofs_fh_to_parent
 {
 	struct isofs_fid *ifid = (struct isofs_fid *)fid;
 
-	if (fh_type != 2)
+	if (fh_len < 2 || fh_type != 2)
 		return NULL;
 
 	return isofs_export_iget(sb,
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -1573,8 +1573,10 @@ struct dentry *reiserfs_fh_to_dentry(str
 			reiserfs_warning(sb, "reiserfs-13077",
 				"nfsd/reiserfs, fhtype=%d, len=%d - odd",
 				fh_type, fh_len);
-		fh_type = 5;
+		fh_type = fh_len;
 	}
+	if (fh_len < 2)
+		return NULL;
 
 	return reiserfs_get_dentry(sb, fid->raw[0], fid->raw[1],
 		(fh_type == 3 || fh_type >= 5) ? fid->raw[2] : 0);
@@ -1583,6 +1585,8 @@ struct dentry *reiserfs_fh_to_dentry(str
 struct dentry *reiserfs_fh_to_parent(struct super_block *sb, struct fid *fid,
 		int fh_len, int fh_type)
 {
+	if (fh_type > fh_len)
+		fh_type = fh_len;
 	if (fh_type < 4)
 		return NULL;
 
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -189,6 +189,9 @@ xfs_fs_fh_to_parent(struct super_block *
 	struct xfs_fid64	*fid64 = (struct xfs_fid64 *)fid;
 	struct inode		*inode = NULL;
 
+	if (fh_len < xfs_fileid_length(fileid_type))
+		return NULL;
+
 	switch (fileid_type) {
 	case FILEID_INO32_GEN_PARENT:
 		inode = xfs_nfs_get_inode(sb, fid->i32.parent_ino,
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2366,12 +2366,14 @@ static struct dentry *shmem_fh_to_dentry
 {
 	struct inode *inode;
 	struct dentry *dentry = NULL;
-	u64 inum = fid->raw[2];
-	inum = (inum << 32) | fid->raw[1];
+	u64 inum;
 
 	if (fh_len < 3)
 		return NULL;
 
+	inum = fid->raw[2];
+	inum = (inum << 32) | fid->raw[1];
+
 	inode = ilookup5(sb, (unsigned long)(inum + fid->raw[0]),
 			shmem_match, fid->raw);
 	if (inode) {

[ 18/76] iscsi-target: Correctly set 0xffffffff field within ISCSI_OP_REJECT PDU

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit f25590f39d543272f7ae7b00d533359c8d7ff331 upstream.

This patch adds a missing iscsi_reject->ffffffff assignment within
iscsit_send_reject() code to properly follow RFC-3720 Section 10.17
Bytes 16 -> 19 for the PDU format definition of ISCSI_OP_REJECT.

We've not seen any initiators care about this bytes in practice, but
as Ronnie reported this was causing trouble with wireshark packet
decoding lets go ahead and fix this up now.

Reported-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -3424,6 +3424,7 @@ static int iscsit_send_reject(
 	hdr->opcode		= ISCSI_OP_REJECT;
 	hdr->flags		|= ISCSI_FLAG_CMD_FINAL;
 	hton24(hdr->dlength, ISCSI_HDR_LEN);
+	hdr->ffffffff		= 0xffffffff;
 	cmd->stat_sn		= conn->stat_sn++;
 	hdr->statsn		= cpu_to_be32(cmd->stat_sn);
 	hdr->exp_cmdsn	= cpu_to_be32(conn->sess->exp_cmd_sn);

[ 19/76] iscsit: remove incorrect unlock in iscsit_build_sendtargets_resp

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christoph Hellwig <hch@infradead.org>

commit 904753da183566c71211d23c169a80184648c121 upstream.

Fix a potential multiple spin-unlock -> deadlock scenario during the
overflow check within iscsit_build_sendtargets_resp() as found by
sparse static checking.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -3271,7 +3271,6 @@ static int iscsit_build_sendtargets_resp
 		len += 1;
 
 		if ((len + payload_len) > buffer_len) {
-			spin_unlock(&tiqn->tiqn_tpg_lock);
 			end_of_buf = 1;
 			goto eob;
 		}

[ 20/76] iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 38b11bae6ba02da352340aff12ee25755977b222 upstream.

We've had reports in the past about this specific case, so it's time to
go ahead and explicitly set cache_dynamic_acls=1 for generate_node_acls=1
(TPG demo-mode) operation.

During normal generate_node_acls=0 operation with explicit NodeACLs ->
se_node_acl memory is persistent to the configfs group located at
/sys/kernel/config/target/$TARGETNAME/$TPGT/acls/$INITIATORNAME, so in
the generate_node_acls=1 case we want the reservation logic to reference
existing per initiator IQN se_node_acl memory (not to generate a new
se_node_acl), so go ahead and always set cache_dynamic_acls=1 when
TPG demo-mode is enabled.

Reported-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target_tpg.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/target/iscsi/iscsi_target_tpg.c
+++ b/drivers/target/iscsi/iscsi_target_tpg.c
@@ -677,6 +677,12 @@ int iscsit_ta_generate_node_acls(
 	pr_debug("iSCSI_TPG[%hu] - Generate Initiator Portal Group ACLs: %s\n",
 		tpg->tpgt, (a->generate_node_acls) ? "Enabled" : "Disabled");
 
+	if (flag == 1 && a->cache_dynamic_acls == 0) {
+		pr_debug("Explicitly setting cache_dynamic_acls=1 when "
+			"generate_node_acls=1\n");
+		a->cache_dynamic_acls = 1;
+	}
+
 	return 0;
 }
 
@@ -716,6 +722,12 @@ int iscsit_ta_cache_dynamic_acls(
 		return -EINVAL;
 	}
 
+	if (a->generate_node_acls == 1 && flag == 0) {
+		pr_debug("Skipping cache_dynamic_acls=0 when"
+			" generate_node_acls=1\n");
+		return 0;
+	}
+
 	a->cache_dynamic_acls = flag;
 	pr_debug("iSCSI_TPG[%hu] - Cache Dynamic Initiator Portal Group"
 		" ACLs %s\n", tpg->tpgt, (a->cache_dynamic_acls) ?

[ 21/76] iscsi-target: Bump defaults for nopin_timeout + nopin_response_timeout values

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit cf0eb28d3ba60098865bf7dbcbfdd6b1cc483e3b upstream.

This patch increases the default for nopin_timeout to 15 seconds (wait
between sending a new NopIN ping) and nopin_response_timeout to 30 seconds
(wait for NopOUT response before failing the connection) in order to avoid
false positives by iSCSI Initiators who are not always able (under load) to
respond to NopIN echo PING requests within the current 5 second window.

False positives have been observed recently using Open-iSCSI code on v3.3.x
with heavy large-block READ workloads over small MTU 1 Gb/sec ports, and
increasing these values to more reasonable defaults significantly reduces
the possibility of false positive NopIN response timeout events under
this specific workload.

Historically these have been set low to initiate connection recovery as
soon as possible if we don't hear a ping back, but for modern v3.x code
on 1 -> 10 Gb/sec ports these new defaults make alot more sense.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target_core.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/target/iscsi/iscsi_target_core.h
+++ b/drivers/target/iscsi/iscsi_target_core.h
@@ -25,10 +25,10 @@
 #define NA_DATAOUT_TIMEOUT_RETRIES	5
 #define NA_DATAOUT_TIMEOUT_RETRIES_MAX	15
 #define NA_DATAOUT_TIMEOUT_RETRIES_MIN	1
-#define NA_NOPIN_TIMEOUT		5
+#define NA_NOPIN_TIMEOUT		15
 #define NA_NOPIN_TIMEOUT_MAX		60
 #define NA_NOPIN_TIMEOUT_MIN		3
-#define NA_NOPIN_RESPONSE_TIMEOUT	5
+#define NA_NOPIN_RESPONSE_TIMEOUT	30
 #define NA_NOPIN_RESPONSE_TIMEOUT_MAX	60
 #define NA_NOPIN_RESPONSE_TIMEOUT_MIN	3
 #define NA_RANDOM_DATAIN_PDU_OFFSETS	0

[ 22/76] SCSI: storvsc: Account for in-transit packets in the RESET path

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "K. Y. Srinivasan" <kys@microsoft.com>

commit 5c1b10ab7f93d24f29b5630286e323d1c5802d5c upstream.

Properly account for I/O in transit before returning from the RESET call.
In the absense of this patch, we could have a situation where the host may
respond to a command that was issued prior to the issuance of the RESET
command at some arbitrary time after responding to the RESET command.
Currently, the host does not do anything with the RESET command.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/storvsc_drv.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1221,7 +1221,12 @@ static int storvsc_host_reset_handler(st
 	/*
 	 * At this point, all outstanding requests in the adapter
 	 * should have been flushed out and return to us
+	 * There is a potential race here where the host may be in
+	 * the process of responding when we return from here.
+	 * Just wait for all in-transit packets to be accounted for
+	 * before we return from here.
 	 */
+	storvsc_wait_to_drain(stor_device);
 
 	return SUCCESS;
 }

[ 23/76] SCSI: scsi_debug: Fix off-by-one bug when unmapping region

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lukas Czerner <lczerner@redhat.com>

commit bc977749e967daa56de1922cf4cb38525631c51c upstream.

Currently it is possible to unmap one more block than user requested to
due to the off-by-one error in unmap_region(). This is probably due to
the fact that the end variable despite its name actually points to the
last block to unmap + 1. However in the condition it is handled as the
last block of the region to unmap.

The bug was not previously spotted probably due to the fact that the
region was not zeroed, which has changed with commit
be1dd78de5686c062bb3103f9e86d444a10ed783. With that commit we were able
to corrupt the ext4 file system on 256M scsi_debug device with LBPRZ
enabled using fstrim.

Since the 'end' semantic is the same in several functions there this
commit just fixes the condition to use the 'end' variable correctly in
that context.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/scsi_debug.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -2054,7 +2054,7 @@ static void unmap_region(sector_t lba, u
 		block = lba + alignment;
 		rem = do_div(block, granularity);
 
-		if (rem == 0 && lba + granularity <= end && block < map_size) {
+		if (rem == 0 && lba + granularity < end && block < map_size) {
 			clear_bit(block, map_storep);
 			if (scsi_debug_lbprz)
 				memset(fake_storep +

[ 24/76] SCSI: virtio-scsi: initialize scatterlist structure

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Richard W.M. Jones" <rjones@redhat.com>

commit 2e9c9dfde00a6466441e93033cf2c37f720bdacf upstream.

The sg struct is used without being initialized, which breaks
when CONFIG_DEBUG_SG is enabled.

Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/virtio_scsi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -219,7 +219,7 @@ static int virtscsi_kick_event(struct vi
 	struct scatterlist sg;
 	unsigned long flags;
 
-	sg_set_buf(&sg, &event_node->event, sizeof(struct virtio_scsi_event));
+	sg_init_one(&sg, &event_node->event, sizeof(struct virtio_scsi_event));
 
 	spin_lock_irqsave(&vscsi->event_vq.vq_lock, flags);
 

[ 25/76] ARM: 7541/1: Add ARM ERRATA 775420 workaround

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Simon Horman <horms@verge.net.au>

commit 7253b85cc62d6ff84143d96fe6cd54f73736f4d7 upstream.

arm: Add ARM ERRATA 775420 workaround

Workaround for the 775420 Cortex-A9 (r2p2, r2p6,r2p8,r2p10,r3p0) erratum.
In case a date cache maintenance operation aborts with MMU exception, it
might cause the processor to deadlock. This workaround puts DSB before
executing ISB if an abort may occur on cache maintenance.

Based on work by Kouei Abe and feedback from Catalin Marinas.

Signed-off-by: Kouei Abe <kouei.abe.cp@rms.renesas.com>
[ horms@verge.net.au: Changed to implementation
  suggested by catalin.marinas@arm.com ]
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/Kconfig       |   10 ++++++++++
 arch/arm/mm/cache-v7.S |    3 +++
 2 files changed, 13 insertions(+)

--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1413,6 +1413,16 @@ config PL310_ERRATA_769419
 	  on systems with an outer cache, the store buffer is drained
 	  explicitly.
 
+config ARM_ERRATA_775420
+       bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
+       depends on CPU_V7
+       help
+	 This option enables the workaround for the 775420 Cortex-A9 (r2p2,
+	 r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
+	 operation aborts with MMU exception, it might cause the processor
+	 to deadlock. This workaround puts DSB before executing ISB if
+	 an abort may occur on cache maintenance.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -211,6 +211,9 @@ ENTRY(v7_coherent_user_range)
  * isn't mapped, fail with -EFAULT.
  */
 9001:
+#ifdef CONFIG_ARM_ERRATA_775420
+	dsb
+#endif
 	mov	r0, #-EFAULT
 	mov	pc, lr
  UNWIND(.fnend		)

[ 26/76] ARM: OMAP: counter: add locking to read_persistent_clock

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Cross <ccross@android.com>

commit 9d7d6e363b06934221b81a859d509844c97380df upstream.

read_persistent_clock uses a global variable, use a spinlock to
ensure non-atomic updates to the variable don't overlap and cause
time to move backwards.

Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/plat-omap/counter_32k.c |   21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -55,22 +55,29 @@ static u32 notrace omap_32k_read_sched_c
  * nsecs and adds to a monotonically increasing timespec.
  */
 static struct timespec persistent_ts;
-static cycles_t cycles, last_cycles;
+static cycles_t cycles;
 static unsigned int persistent_mult, persistent_shift;
+static DEFINE_SPINLOCK(read_persistent_clock_lock);
+
 static void omap_read_persistent_clock(struct timespec *ts)
 {
 	unsigned long long nsecs;
-	cycles_t delta;
-	struct timespec *tsp = &persistent_ts;
+	cycles_t last_cycles;
+	unsigned long flags;
+
+	spin_lock_irqsave(&read_persistent_clock_lock, flags);
 
 	last_cycles = cycles;
 	cycles = sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0;
-	delta = cycles - last_cycles;
 
-	nsecs = clocksource_cyc2ns(delta, persistent_mult, persistent_shift);
+	nsecs = clocksource_cyc2ns(cycles - last_cycles,
+					persistent_mult, persistent_shift);
+
+	timespec_add_ns(&persistent_ts, nsecs);
+
+	*ts = persistent_ts;
 
-	timespec_add_ns(tsp, nsecs);
-	*ts = *tsp;
+	spin_unlock_irqrestore(&read_persistent_clock_lock, flags);
 }
 
 /**

[ 27/76] firewire: cdev: fix user memory corruption (i386 userland on amd64 kernel)

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Richter <stefanr@s5r6.in-berlin.de>

commit 790198f74c9d1b46b6a89504361b1a844670d050 upstream.

Fix two bugs of the /dev/fw* character device concerning the
FW_CDEV_IOC_GET_INFO ioctl with nonzero fw_cdev_get_info.bus_reset.
(Practically all /dev/fw* clients issue this ioctl right after opening
the device.)

Both bugs are caused by sizeof(struct fw_cdev_event_bus_reset) being 36
without natural alignment and 40 with natural alignment.

 1) Memory corruption, affecting i386 userland on amd64 kernel:
    Userland reserves a 36 bytes large buffer, kernel writes 40 bytes.
    This has been first found and reported against libraw1394 if
    compiled with gcc 4.7 which happens to order libraw1394's stack such
    that the bug became visible as data corruption.

 2) Information leak, affecting all kernel architectures except i386:
    4 bytes of random kernel stack data were leaked to userspace.

Hence limit the respective copy_to_user() to the 32-bit aligned size of
struct fw_cdev_event_bus_reset.

Reported-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/firewire/core-cdev.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -473,8 +473,8 @@ static int ioctl_get_info(struct client
 	client->bus_reset_closure = a->bus_reset_closure;
 	if (a->bus_reset != 0) {
 		fill_bus_reset_event(&bus_reset, client);
-		ret = copy_to_user(u64_to_uptr(a->bus_reset),
-				   &bus_reset, sizeof(bus_reset));
+		/* unaligned size of bus_reset is 36 bytes */
+		ret = copy_to_user(u64_to_uptr(a->bus_reset), &bus_reset, 36);
 	}
 	if (ret == 0 && list_empty(&client->link))
 		list_add_tail(&client->link, &client->device->client_list);

[ 28/76] SUNRPC: Ensure that the TCP socket is closed when in CLOSE_WAIT

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit a519fc7a70d1a918574bb826cc6905b87b482eb9 upstream.

Instead of doing a shutdown() call, we need to do an actual close().
Ditto if/when the server is sending us junk RPC headers.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/xprtsock.c |   21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -1025,6 +1025,16 @@ static void xs_udp_data_ready(struct soc
 	read_unlock_bh(&sk->sk_callback_lock);
 }
 
+/*
+ * Helper function to force a TCP close if the server is sending
+ * junk and/or it has put us in CLOSE_WAIT
+ */
+static void xs_tcp_force_close(struct rpc_xprt *xprt)
+{
+	set_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
+	xprt_force_disconnect(xprt);
+}
+
 static inline void xs_tcp_read_fraghdr(struct rpc_xprt *xprt, struct xdr_skb_reader *desc)
 {
 	struct sock_xprt *transport = container_of(xprt, struct sock_xprt, xprt);
@@ -1051,7 +1061,7 @@ static inline void xs_tcp_read_fraghdr(s
 	/* Sanity check of the record length */
 	if (unlikely(transport->tcp_reclen < 8)) {
 		dprintk("RPC:       invalid TCP record fragment length\n");
-		xprt_force_disconnect(xprt);
+		xs_tcp_force_close(xprt);
 		return;
 	}
 	dprintk("RPC:       reading TCP record fragment of length %d\n",
@@ -1132,7 +1142,7 @@ static inline void xs_tcp_read_calldir(s
 		break;
 	default:
 		dprintk("RPC:       invalid request message type\n");
-		xprt_force_disconnect(&transport->xprt);
+		xs_tcp_force_close(&transport->xprt);
 	}
 	xs_tcp_check_fraghdr(transport);
 }
@@ -1455,6 +1465,8 @@ static void xs_tcp_cancel_linger_timeout
 static void xs_sock_mark_closed(struct rpc_xprt *xprt)
 {
 	smp_mb__before_clear_bit();
+	clear_bit(XPRT_CONNECTION_ABORT, &xprt->state);
+	clear_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
 	clear_bit(XPRT_CLOSE_WAIT, &xprt->state);
 	clear_bit(XPRT_CLOSING, &xprt->state);
 	smp_mb__after_clear_bit();
@@ -1512,8 +1524,8 @@ static void xs_tcp_state_change(struct s
 		break;
 	case TCP_CLOSE_WAIT:
 		/* The server initiated a shutdown of the socket */
-		xprt_force_disconnect(xprt);
 		xprt->connect_cookie++;
+		xs_tcp_force_close(xprt);
 	case TCP_CLOSING:
 		/*
 		 * If the server closed down the connection, make sure that
@@ -2199,8 +2211,7 @@ static void xs_tcp_setup_socket(struct w
 		/* We're probably in TIME_WAIT. Get rid of existing socket,
 		 * and retry
 		 */
-		set_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
-		xprt_force_disconnect(xprt);
+		xs_tcp_force_close(xprt);
 		break;
 	case -ECONNREFUSED:
 	case -ECONNRESET:

[ 29/76] target: support zero allocation length in INQUIRY

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Bonzini <pbonzini@redhat.com>

commit ffe7b0e9326d9c68f5688bef691dd49f1e0d3651 upstream.

INQUIRY processing already uses an on-heap bounce buffer for loopback,
but not for other fabrics.  Switch this to a cheaper on-stack bounce
buffer, similar to the one used by MODE SENSE and REQUEST SENSE, and
use it unconditionally.  With this in place, zero allocation length is
handled simply by checking the return address of transport_kmap_data_sg.

Testcase: sg_raw /dev/sdb 12 00 83 00 00 00
    should fail with ILLEGAL REQUEST / INVALID FIELD IN CDB sense
    does not fail without the patch
    fails correctly with the series

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_spc.c |   31 ++++++-------------------------
 1 file changed, 6 insertions(+), 25 deletions(-)

--- a/drivers/target/target_core_spc.c
+++ b/drivers/target/target_core_spc.c
@@ -600,30 +600,11 @@ static int spc_emulate_inquiry(struct se
 {
 	struct se_device *dev = cmd->se_dev;
 	struct se_portal_group *tpg = cmd->se_lun->lun_sep->sep_tpg;
-	unsigned char *buf, *map_buf;
+	unsigned char *rbuf;
 	unsigned char *cdb = cmd->t_task_cdb;
+	unsigned char buf[SE_INQUIRY_BUF];
 	int p, ret;
 
-	map_buf = transport_kmap_data_sg(cmd);
-	/*
-	 * If SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC is not set, then we
-	 * know we actually allocated a full page.  Otherwise, if the
-	 * data buffer is too small, allocate a temporary buffer so we
-	 * don't have to worry about overruns in all our INQUIRY
-	 * emulation handling.
-	 */
-	if (cmd->data_length < SE_INQUIRY_BUF &&
-	    (cmd->se_cmd_flags & SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC)) {
-		buf = kzalloc(SE_INQUIRY_BUF, GFP_KERNEL);
-		if (!buf) {
-			transport_kunmap_data_sg(cmd);
-			cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
-			return -ENOMEM;
-		}
-	} else {
-		buf = map_buf;
-	}
-
 	if (dev == tpg->tpg_virt_lun0.lun_se_dev)
 		buf[0] = 0x3f; /* Not connected */
 	else
@@ -655,11 +636,11 @@ static int spc_emulate_inquiry(struct se
 	ret = -EINVAL;
 
 out:
-	if (buf != map_buf) {
-		memcpy(map_buf, buf, cmd->data_length);
-		kfree(buf);
+	rbuf = transport_kmap_data_sg(cmd);
+	if (rbuf) {
+		memcpy(rbuf, buf, min_t(u32, sizeof(buf), cmd->data_length));
+		transport_kunmap_data_sg(cmd);
 	}
-	transport_kunmap_data_sg(cmd);
 
 	if (!ret)
 		target_complete_cmd(cmd, GOOD);

[ 30/76] target: fix truncation of mode data, support zero allocation length

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Bonzini <pbonzini@redhat.com>

commit 7a3f369ce31694017996524a1cdb08208a839077 upstream.

The offset was not bumped back to the full size after writing the
header of the MODE SENSE response, so the last 1 or 2 bytes were
not copied.

On top of this, support zero-length requests by checking for the
return value of transport_kmap_data_sg.

Testcase: sg_raw -r20 /dev/sdb 5a 00 0a 00 00 00 00 00 14 00
    last byte should be 0x1e
    it is 0x00 without the patch
    it is correct with the patch

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_spc.c |   17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

--- a/drivers/target/target_core_spc.c
+++ b/drivers/target/target_core_spc.c
@@ -784,7 +784,7 @@ static int spc_emulate_modesense(struct
 	unsigned char *rbuf;
 	int type = dev->transport->get_device_type(dev);
 	int ten = (cmd->t_task_cdb[0] == MODE_SENSE_10);
-	int offset = ten ? 8 : 4;
+	u32 offset = ten ? 8 : 4;
 	int length = 0;
 	unsigned char buf[SE_MODE_PAGE_BUF];
 
@@ -817,6 +817,7 @@ static int spc_emulate_modesense(struct
 		offset -= 2;
 		buf[0] = (offset >> 8) & 0xff;
 		buf[1] = offset & 0xff;
+		offset += 2;
 
 		if ((cmd->se_lun->lun_access & TRANSPORT_LUNFLAGS_READ_ONLY) ||
 		    (cmd->se_deve &&
@@ -826,13 +827,10 @@ static int spc_emulate_modesense(struct
 		if ((dev->se_sub_dev->se_dev_attrib.emulate_write_cache > 0) &&
 		    (dev->se_sub_dev->se_dev_attrib.emulate_fua_write > 0))
 			spc_modesense_dpofua(&buf[3], type);
-
-		if ((offset + 2) > cmd->data_length)
-			offset = cmd->data_length;
-
 	} else {
 		offset -= 1;
 		buf[0] = offset & 0xff;
+		offset += 1;
 
 		if ((cmd->se_lun->lun_access & TRANSPORT_LUNFLAGS_READ_ONLY) ||
 		    (cmd->se_deve &&
@@ -842,14 +840,13 @@ static int spc_emulate_modesense(struct
 		if ((dev->se_sub_dev->se_dev_attrib.emulate_write_cache > 0) &&
 		    (dev->se_sub_dev->se_dev_attrib.emulate_fua_write > 0))
 			spc_modesense_dpofua(&buf[2], type);
-
-		if ((offset + 1) > cmd->data_length)
-			offset = cmd->data_length;
 	}
 
 	rbuf = transport_kmap_data_sg(cmd);
-	memcpy(rbuf, buf, offset);
-	transport_kunmap_data_sg(cmd);
+	if (rbuf) {
+		memcpy(rbuf, buf, min(offset, cmd->data_length));
+		transport_kunmap_data_sg(cmd);
+	}
 
 	target_complete_cmd(cmd, GOOD);
 	return 0;

[ 31/76] target: fix return code in target_core_init_configfs error path

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Senna Tschudin <peter.senna@gmail.com>

commit 37bb7899ca366dc212b71b150e78566d04808cc0 upstream.

This patch fixes error cases within target_core_init_configfs() to
properly set ret = -ENOMEM before jumping to the out_global exception
path.

This was originally discovered with the following Coccinelle semantic
match information:

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.  A simplified version of the semantic match
that finds this problem is as follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_configfs.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/target/target_core_configfs.c
+++ b/drivers/target/target_core_configfs.c
@@ -3132,6 +3132,7 @@ static int __init target_core_init_confi
 				GFP_KERNEL);
 	if (!target_cg->default_groups) {
 		pr_err("Unable to allocate target_cg->default_groups\n");
+		ret = -ENOMEM;
 		goto out_global;
 	}
 
@@ -3147,6 +3148,7 @@ static int __init target_core_init_confi
 				GFP_KERNEL);
 	if (!hba_cg->default_groups) {
 		pr_err("Unable to allocate hba_cg->default_groups\n");
+		ret = -ENOMEM;
 		goto out_global;
 	}
 	config_group_init_type_name(&alua_group,
@@ -3162,6 +3164,7 @@ static int __init target_core_init_confi
 			GFP_KERNEL);
 	if (!alua_cg->default_groups) {
 		pr_err("Unable to allocate alua_cg->default_groups\n");
+		ret = -ENOMEM;
 		goto out_global;
 	}
 
@@ -3173,14 +3176,17 @@ static int __init target_core_init_confi
 	 * Add core/alua/lu_gps/default_lu_gp
 	 */
 	lu_gp = core_alua_allocate_lu_gp("default_lu_gp", 1);
-	if (IS_ERR(lu_gp))
+	if (IS_ERR(lu_gp)) {
+		ret = -ENOMEM;
 		goto out_global;
+	}
 
 	lu_gp_cg = &alua_lu_gps_group;
 	lu_gp_cg->default_groups = kzalloc(sizeof(struct config_group) * 2,
 			GFP_KERNEL);
 	if (!lu_gp_cg->default_groups) {
 		pr_err("Unable to allocate lu_gp_cg->default_groups\n");
+		ret = -ENOMEM;
 		goto out_global;
 	}
 

[ 32/76] target/file: Re-enable optional fd_buffered_io=1 operation

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit b32f4c7ed85c5cee2a21a55c9f59ebc9d57a2463 upstream.

This patch re-adds the ability to optionally run in buffered FILEIO mode
(eg: w/o O_DSYNC) for device backends in order to once again use the
Linux buffered cache as a write-back storage mechanism.

This logic was originally dropped with mainline v3.5-rc commit:

commit a4dff3043c231d57f982af635c9d2192ee40e5ae
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date:   Wed May 30 16:25:41 2012 -0700

    target/file: Use O_DSYNC by default for FILEIO backends

This difference with this patch is that fd_create_virtdevice() now
forces the explicit setting of emulate_write_cache=1 when buffered FILEIO
operation has been enabled.

(v2: Switch to FDBD_HAS_BUFFERED_IO_WCE + add more detailed
     comment as requested by hch)

Reported-by: Ferry <iscsitmp@bananateam.nl>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_file.c |   41 +++++++++++++++++++++++++++++++++++---
 drivers/target/target_core_file.h |    1 
 2 files changed, 39 insertions(+), 3 deletions(-)

--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -125,6 +125,19 @@ static struct se_device *fd_create_virtd
 	 * of pure timestamp updates.
 	 */
 	flags = O_RDWR | O_CREAT | O_LARGEFILE | O_DSYNC;
+	/*
+	 * Optionally allow fd_buffered_io=1 to be enabled for people
+	 * who want use the fs buffer cache as an WriteCache mechanism.
+	 *
+	 * This means that in event of a hard failure, there is a risk
+	 * of silent data-loss if the SCSI client has *not* performed a
+	 * forced unit access (FUA) write, or issued SYNCHRONIZE_CACHE
+	 * to write-out the entire device cache.
+	 */
+	if (fd_dev->fbd_flags & FDBD_HAS_BUFFERED_IO_WCE) {
+		pr_debug("FILEIO: Disabling O_DSYNC, using buffered FILEIO\n");
+		flags &= ~O_DSYNC;
+	}
 
 	file = filp_open(fd_dev->fd_dev_name, flags, 0600);
 	if (IS_ERR(file)) {
@@ -188,6 +201,12 @@ static struct se_device *fd_create_virtd
 	if (!dev)
 		goto fail;
 
+	if (fd_dev->fbd_flags & FDBD_HAS_BUFFERED_IO_WCE) {
+		pr_debug("FILEIO: Forcing setting of emulate_write_cache=1"
+			" with FDBD_HAS_BUFFERED_IO_WCE\n");
+		dev->se_sub_dev->se_dev_attrib.emulate_write_cache = 1;
+	}
+
 	fd_dev->fd_dev_id = fd_host->fd_host_dev_id_count++;
 	fd_dev->fd_queue_depth = dev->queue_depth;
 
@@ -407,6 +426,7 @@ enum {
 static match_table_t tokens = {
 	{Opt_fd_dev_name, "fd_dev_name=%s"},
 	{Opt_fd_dev_size, "fd_dev_size=%s"},
+	{Opt_fd_buffered_io, "fd_buffered_io=%d"},
 	{Opt_err, NULL}
 };
 
@@ -418,7 +438,7 @@ static ssize_t fd_set_configfs_dev_param
 	struct fd_dev *fd_dev = se_dev->se_dev_su_ptr;
 	char *orig, *ptr, *arg_p, *opts;
 	substring_t args[MAX_OPT_ARGS];
-	int ret = 0, token;
+	int ret = 0, arg, token;
 
 	opts = kstrdup(page, GFP_KERNEL);
 	if (!opts)
@@ -459,6 +479,19 @@ static ssize_t fd_set_configfs_dev_param
 					" bytes\n", fd_dev->fd_dev_size);
 			fd_dev->fbd_flags |= FBDF_HAS_SIZE;
 			break;
+		case Opt_fd_buffered_io:
+			match_int(args, &arg);
+			if (arg != 1) {
+				pr_err("bogus fd_buffered_io=%d value\n", arg);
+				ret = -EINVAL;
+				goto out;
+			}
+
+			pr_debug("FILEIO: Using buffered I/O"
+				" operations for struct fd_dev\n");
+
+			fd_dev->fbd_flags |= FDBD_HAS_BUFFERED_IO_WCE;
+			break;
 		default:
 			break;
 		}
@@ -490,8 +523,10 @@ static ssize_t fd_show_configfs_dev_para
 	ssize_t bl = 0;
 
 	bl = sprintf(b + bl, "TCM FILEIO ID: %u", fd_dev->fd_dev_id);
-	bl += sprintf(b + bl, "        File: %s  Size: %llu  Mode: O_DSYNC\n",
-		fd_dev->fd_dev_name, fd_dev->fd_dev_size);
+	bl += sprintf(b + bl, "        File: %s  Size: %llu  Mode: %s\n",
+		fd_dev->fd_dev_name, fd_dev->fd_dev_size,
+		(fd_dev->fbd_flags & FDBD_HAS_BUFFERED_IO_WCE) ?
+		"Buffered-WCE" : "O_DSYNC");
 	return bl;
 }
 
--- a/drivers/target/target_core_file.h
+++ b/drivers/target/target_core_file.h
@@ -14,6 +14,7 @@
 
 #define FBDF_HAS_PATH		0x01
 #define FBDF_HAS_SIZE		0x02
+#define FDBD_HAS_BUFFERED_IO_WCE 0x04
 
 struct fd_dev {
 	u32		fbd_flags;

[ 33/76] qla2xxx: Fix endianness of task management response code

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roland Dreier <roland@purestorage.com>

commit e4b11b89f9039ca97b2ed1b6efeb6749fbdeb252 upstream.

The qla2xxx firmware actually expects the task management response
code in a CTIO IOCB with SCSI status mode 1 to be in little-endian
byte order, ie the response code should be the first byte in the
sense_data[] array.  The old code erroneously byte-swapped the
response code, which puts it in the wrong place on the wire and leads
to initiators thinking every task management request succeeds (since
they see 0 in the byte where they look for the response code).

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: Chad Dupuis <chad.dupuis@qlogic.com>
Cc: Arun Easi <arun.easi@qlogic.com>
Acked-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/qla2xxx/qla_target.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -1403,7 +1403,7 @@ static void qlt_24xx_send_task_mgmt_ctio
 	ctio->u.status1.scsi_status =
 	    __constant_cpu_to_le16(SS_RESPONSE_INFO_LEN_VALID);
 	ctio->u.status1.response_len = __constant_cpu_to_le16(8);
-	((uint32_t *)ctio->u.status1.sense_data)[0] = cpu_to_be32(resp_code);
+	ctio->u.status1.sense_data[0] = resp_code;
 
 	qla2x00_start_iocbs(ha, ha->req);
 }

[ 34/76] vfio: Move PCI INTx eventfd setting earlier

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Williamson <alex.williamson@redhat.com>

commit 9dbdfd23b7638d054f3b0e70c64dfb9f297f2a9f upstream.

We need to be ready to recieve an interrupt as soon as we call
request_irq, so our eventfd context setting needs to be moved
earlier.  Without this, an interrupt from our device or one
sharing the interrupt line can pass a NULL into eventfd_signal
and oops.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/vfio/pci/vfio_pci_intrs.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/vfio/pci/vfio_pci_intrs.c
+++ b/drivers/vfio/pci/vfio_pci_intrs.c
@@ -400,19 +400,20 @@ static int vfio_intx_set_signal(struct v
 		return PTR_ERR(trigger);
 	}
 
+	vdev->ctx[0].trigger = trigger;
+
 	if (!vdev->pci_2_3)
 		irqflags = 0;
 
 	ret = request_irq(pdev->irq, vfio_intx_handler,
 			  irqflags, vdev->ctx[0].name, vdev);
 	if (ret) {
+		vdev->ctx[0].trigger = NULL;
 		kfree(vdev->ctx[0].name);
 		eventfd_ctx_put(trigger);
 		return ret;
 	}
 
-	vdev->ctx[0].trigger = trigger;
-
 	/*
 	 * INTx disable will stick across the new irq setup,
 	 * disable_irq won't.

[ 35/76] vfio: Fix PCI INTx disable consistency

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Williamson <alex.williamson@redhat.com>

commit 899649b7d4ead76c19e39251ca886eebe3f811a8 upstream.

The virq_disabled flag tracks the userspace view of INTx masking
across interrupt mode changes, but we're not consistently applying
this to the interrupt and masking handler notion of the device.
Currently if the user sets DisINTx while in MSI or MSIX mode, then
returns to INTx mode (ex. rebooting a qemu guest), the hardware has
DisINTx+, but the management of INTx thinks it's enabled, making it
impossible to actually clear DisINTx.  Fix this by updating the
handler state when INTx is re-enabled.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/vfio/pci/vfio_pci_intrs.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/vfio/pci/vfio_pci_intrs.c
+++ b/drivers/vfio/pci/vfio_pci_intrs.c
@@ -366,6 +366,17 @@ static int vfio_intx_enable(struct vfio_
 		return -ENOMEM;
 
 	vdev->num_ctx = 1;
+
+	/*
+	 * If the virtual interrupt is masked, restore it.  Devices
+	 * supporting DisINTx can be masked at the hardware level
+	 * here, non-PCI-2.3 devices will have to wait until the
+	 * interrupt is enabled.
+	 */
+	vdev->ctx[0].masked = vdev->virq_disabled;
+	if (vdev->pci_2_3)
+		pci_intx(vdev->pdev, !vdev->ctx[0].masked);
+
 	vdev->irq_type = VFIO_PCI_INTX_IRQ_INDEX;
 
 	return 0;
@@ -419,7 +430,7 @@ static int vfio_intx_set_signal(struct v
 	 * disable_irq won't.
 	 */
 	spin_lock_irqsave(&vdev->irqlock, flags);
-	if (!vdev->pci_2_3 && (vdev->ctx[0].masked || vdev->virq_disabled))
+	if (!vdev->pci_2_3 && vdev->ctx[0].masked)
 		disable_irq_nosync(pdev->irq);
 	spin_unlock_irqrestore(&vdev->irqlock, flags);
 

[ 36/76] xen/pv-on-hvm kexec: add quirk for Xen 3.4 and shutdown watches.

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit cb6b6df111e46b9d0f79eb971575fd50555f43f4 upstream.

The commit 254d1a3f02ebc10ccc6e4903394d8d3f484f715e, titled
"xen/pv-on-hvm kexec: shutdown watches from old kernel" assumes that the
XenBus backend can deal with reading of values from:
 "control/platform-feature-xs_reset_watches":

    ... a patch for xenstored is required so that it
    accepts the XS_RESET_WATCHES request from a client (see changeset
    23839:42a45baf037d in xen-unstable.hg). Without the patch for xenstored
    the registration of watches will fail and some features of a PVonHVM
    guest are not available. The guest is still able to boot, but repeated
    kexec boots will fail."

Sadly this is not true when using a Xen 3.4 hypervisor and booting a PVHVM
guest. We end up hanging at:

  err = xenbus_scanf(XBT_NIL, "control",
                        "platform-feature-xs_reset_watches", "%d", &supported);

This can easily be seen with guests hanging at xenbus_init:

NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Xen HVM domU, BIOS 3.4.0 05/13/2011
Hypervisor detected: Xen HVM
Xen version 3.4.
Xen Platform PCI: I/O protocol version 1
... snip ..
calling  xenbus_init+0x0/0x27e @ 1

Reverting the commit or using the attached patch fixes the issue. This fix
checks whether the hypervisor is older than 4.0 and if so does not try to
perform the read.

Fixes-Oracle-Bug: 14708233
Acked-by: Olaf Hering <olaf@aepfle.de>
[v2: Added a comment in the source code]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/xenbus/xenbus_xs.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -47,6 +47,7 @@
 #include <xen/xenbus.h>
 #include <xen/xen.h>
 #include "xenbus_comms.h"
+#include <asm/xen/hypervisor.h>
 
 struct xs_stored_msg {
 	struct list_head list;
@@ -617,7 +618,24 @@ static struct xenbus_watch *find_watch(c
 
 	return NULL;
 }
+/*
+ * Certain older XenBus toolstack cannot handle reading values that are
+ * not populated. Some Xen 3.4 installation are incapable of doing this
+ * so if we are running on anything older than 4 do not attempt to read
+ * control/platform-feature-xs_reset_watches.
+ */
+static bool xen_strict_xenbus_quirk()
+{
+	uint32_t eax, ebx, ecx, edx, base;
+
+	base = xen_cpuid_base();
+	cpuid(base + 1, &eax, &ebx, &ecx, &edx);
 
+	if ((eax >> 16) < 4)
+		return true;
+	return false;
+
+}
 static void xs_reset_watches(void)
 {
 	int err, supported = 0;
@@ -625,6 +643,9 @@ static void xs_reset_watches(void)
 	if (!xen_hvm_domain())
 		return;
 
+	if (xen_strict_xenbus_quirk())
+		return;
+
 	err = xenbus_scanf(XBT_NIL, "control",
 			"platform-feature-xs_reset_watches", "%d", &supported);
 	if (err != 1 || !supported)

[ 37/76] xen/bootup: allow {read|write}_cr8 pvops call.

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit 1a7bbda5b1ab0e02622761305a32dc38735b90b2 upstream.

We actually do not do anything about it. Just return a default
value of zero and if the kernel tries to write anything but 0
we BUG_ON.

This fixes the case when an user tries to suspend the machine
and it blows up in save_processor_state b/c 'read_cr8' is set
to NULL and we get:

kernel BUG at /home/konrad/ssd/linux/arch/x86/include/asm/paravirt.h:100!
invalid opcode: 0000 [#1] SMP
Pid: 2687, comm: init.late Tainted: G           O 3.6.0upstream-00002-gac264ac-dirty #4 Bochs Bochs
RIP: e030:[<ffffffff814d5f42>]  [<ffffffff814d5f42>] save_processor_state+0x212/0x270

.. snip..
Call Trace:
 [<ffffffff810733bf>] do_suspend_lowlevel+0xf/0xac
 [<ffffffff8107330c>] ? x86_acpi_suspend_lowlevel+0x10c/0x150
 [<ffffffff81342ee2>] acpi_suspend_enter+0x57/0xd5

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/xen/enlighten.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -984,7 +984,16 @@ static void xen_write_cr4(unsigned long
 
 	native_write_cr4(cr4);
 }
-
+#ifdef CONFIG_X86_64
+static inline unsigned long xen_read_cr8(void)
+{
+	return 0;
+}
+static inline void xen_write_cr8(unsigned long val)
+{
+	BUG_ON(val);
+}
+#endif
 static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
 {
 	int ret;
@@ -1153,6 +1162,11 @@ static const struct pv_cpu_ops xen_cpu_o
 	.read_cr4_safe = native_read_cr4_safe,
 	.write_cr4 = xen_write_cr4,
 
+#ifdef CONFIG_X86_64
+	.read_cr8 = xen_read_cr8,
+	.write_cr8 = xen_write_cr8,
+#endif
+
 	.wbinvd = native_wbinvd,
 
 	.read_msr = native_read_msr_safe,

[ 38/76] xen/bootup: allow read_tscp call for Xen PV guests.

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit cd0608e71e9757f4dae35bcfb4e88f4d1a03a8ab upstream.

The hypervisor will trap it. However without this patch,
we would crash as the .read_tscp is set to NULL. This patch
fixes it and sets it to the native_read_tscp call.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/xen/enlighten.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1175,6 +1175,8 @@ static const struct pv_cpu_ops xen_cpu_o
 	.read_tsc = native_read_tsc,
 	.read_pmc = native_read_pmc,
 
+	.read_tscp = native_read_tscp,
+
 	.iret = xen_iret,
 	.irq_enable_sysexit = xen_sysexit,
 #ifdef CONFIG_X86_64

[ 39/76] block: fix request_queue->flags initialization

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 60ea8226cbd5c8301f9a39edc574ddabcb8150e0 upstream.

A queue newly allocated with blk_alloc_queue_node() has only
QUEUE_FLAG_BYPASS set.  For request-based drivers,
blk_init_allocated_queue() is called and q->queue_flags is overwritten
with QUEUE_FLAG_DEFAULT which doesn't include BYPASS even though the
initial bypass is still in effect.

In blk_init_allocated_queue(), or QUEUE_FLAG_DEFAULT to q->queue_flags
instead of overwriting.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/blk-core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -696,7 +696,7 @@ blk_init_allocated_queue(struct request_
 	q->request_fn		= rfn;
 	q->prep_rq_fn		= NULL;
 	q->unprep_rq_fn		= NULL;
-	q->queue_flags		= QUEUE_FLAG_DEFAULT;
+	q->queue_flags		|= QUEUE_FLAG_DEFAULT;
 
 	/* Override internal queue lock with supplied lock pointer */
 	if (lock)

[ 40/76] autofs4 - fix reset pending flag on mount fail

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Kent <raven@themaw.net>

commit 49999ab27eab6289a8e4f450e148bdab521361b2 upstream.

In autofs4_d_automount(), if a mount fail occurs the AUTOFS_INF_PENDING
mount pending flag is not cleared.

One effect of this is when using the "browse" option, directory entry
attributes show up with all "?"s due to the incorrect callback and
subsequent failure return (when in fact no callback should be made).

Signed-off-by: Ian Kent <ikent@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/autofs4/root.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -392,10 +392,12 @@ static struct vfsmount *autofs4_d_automo
 		ino->flags |= AUTOFS_INF_PENDING;
 		spin_unlock(&sbi->fs_lock);
 		status = autofs4_mount_wait(dentry);
-		if (status)
-			return ERR_PTR(status);
 		spin_lock(&sbi->fs_lock);
 		ino->flags &= ~AUTOFS_INF_PENDING;
+		if (status) {
+			spin_unlock(&sbi->fs_lock);
+			return ERR_PTR(status);
+		}
 	}
 done:
 	if (!(ino->flags & AUTOFS_INF_EXPIRING)) {

[ 41/76] module: taint kernel when lve module is loaded

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthew Garrett <mjg59@srcf.ucam.org>

commit c99af3752bb52ba3aece5315279a57a477edfaf1 upstream.

Cloudlinux have a product called lve that includes a kernel module. This
was previously GPLed but is now under a proprietary license, but the
module continues to declare MODULE_LICENSE("GPL") and makes use of some
EXPORT_SYMBOL_GPL symbols. Forcibly taint it in order to avoid this.

Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Alex Lyashkov <umka@cloudlinux.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/module.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2730,6 +2730,10 @@ static int check_module_license_and_vers
 	if (strcmp(mod->name, "driverloader") == 0)
 		add_taint_module(mod, TAINT_PROPRIETARY_MODULE);
 
+	/* lve claims to be GPL but upstream won't provide source */
+	if (strcmp(mod->name, "lve") == 0)
+		add_taint_module(mod, TAINT_PROPRIETARY_MODULE);
+
 #ifdef CONFIG_MODVERSIONS
 	if ((mod->num_syms && !mod->crcs)
 	    || (mod->num_gpl_syms && !mod->gpl_crcs)

[ 42/76] video/udlfb: fix line counting in fb_write

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Holler <holler@ahsoftware.de>

commit b8c4321f3d194469007f5f5f2b34ec278c264a04 upstream.

Line 0 and 1 were both written to line 0 (on the display) and all subsequent
lines had an offset of -1. The result was that the last line on the display
was never overwritten by writes to /dev/fbN.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Acked-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/udlfb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -647,7 +647,7 @@ static ssize_t dlfb_ops_write(struct fb_
 	result = fb_sys_write(info, buf, count, ppos);
 
 	if (result > 0) {
-		int start = max((int)(offset / info->fix.line_length) - 1, 0);
+		int start = max((int)(offset / info->fix.line_length), 0);
 		int lines = min((u32)((result / info->fix.line_length) + 1),
 				(u32)info->var.yres);
 

[ 43/76] viafb: dont touch clock state on OLPC XO-1.5

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Drake <dsd@laptop.org>

commit 012a1211845eab69a5488d59eb87d24cc518c627 upstream.

As detailed in the thread titled "viafb PLL/clock tweaking causes XO-1.5
instability," enabling or disabling the IGA1/IGA2 clocks causes occasional
stability problems during suspend/resume cycles on this platform.

This is rather odd, as the documentation suggests that clocks have two
states (on/off) and the default (stable) configuration is configured to
enable the clock only when it is needed. However, explicitly enabling *or*
disabling the clock triggers this system instability, suggesting that there
is a 3rd state at play here.

Leaving the clock enable/disable registers alone solves this problem.
This fixes spurious reboots during suspend/resume behaviour introduced by
commit b692a63a.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/via/via_clock.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--- a/drivers/video/via/via_clock.c
+++ b/drivers/video/via/via_clock.c
@@ -25,6 +25,7 @@
 
 #include <linux/kernel.h>
 #include <linux/via-core.h>
+#include <asm/olpc.h>
 #include "via_clock.h"
 #include "global.h"
 #include "debug.h"
@@ -289,6 +290,10 @@ static void dummy_set_pll(struct via_pll
 	printk(KERN_INFO "Using undocumented set PLL.\n%s", via_slap);
 }
 
+static void noop_set_clock_state(u8 state)
+{
+}
+
 void via_clock_init(struct via_clock *clock, int gfx_chip)
 {
 	switch (gfx_chip) {
@@ -346,4 +351,18 @@ void via_clock_init(struct via_clock *cl
 		break;
 
 	}
+
+	if (machine_is_olpc()) {
+		/* The OLPC XO-1.5 cannot suspend/resume reliably if the
+		 * IGA1/IGA2 clocks are set as on or off (memory rot
+		 * occasionally happens during suspend under such
+		 * configurations).
+		 *
+		 * The only known stable scenario is to leave this bits as-is,
+		 * which in their default states are documented to enable the
+		 * clock only when it is needed.
+		 */
+		clock->set_primary_clock_state = noop_set_clock_state;
+		clock->set_secondary_clock_state = noop_set_clock_state;
+	}
 }

[ 44/76] timekeeping: Cast raw_interval to u64 to avoid shift overflow

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 5b3900cd409466c0070b234d941650685ad0c791 upstream.

We fixed a bunch of integer overflows in timekeeping code during the 3.6
cycle.  I did an audit based on that and found this potential overflow.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Link: http://lkml.kernel.org/r/20121009071823.GA19159@elgon.mountain
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/timekeeping.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1111,7 +1111,7 @@ static cycle_t logarithmic_accumulation(
 	accumulate_nsecs_to_secs(tk);
 
 	/* Accumulate raw time */
-	raw_nsecs = tk->raw_interval << shift;
+	raw_nsecs = (u64)tk->raw_interval << shift;
 	raw_nsecs += tk->raw_time.tv_nsec;
 	if (raw_nsecs >= NSEC_PER_SEC) {
 		u64 raw_secs = raw_nsecs;

[ 45/76] timers: Fix endless looping between cascade() and internal_add_timer()

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Hildner, Christian" <christian.hildner@siemens.com>

commit 26cff4e2aa4d666dc6a120ea34336b5057e3e187 upstream.

Adding two (or more) timers with large values for "expires" (they have
to reside within tv5 in the same list) leads to endless looping
between cascade() and internal_add_timer() in case CONFIG_BASE_SMALL
is one and jiffies are crossing the value 1 << 18. The bug was
introduced between 2.6.11 and 2.6.12 (and survived for quite some
time).

This patch ensures that when cascade() is called timers within tv5 are
not added endlessly to their own list again, instead they are added to
the next lower tv level tv4 (as expected).

Signed-off-by: Christian Hildner <christian.hildner@siemens.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: http://lkml.kernel.org/r/98673C87CB31274881CFFE0B65ECC87B0F5FC1963E@DEFTHW99EA4MSX.ww902.siemens.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/timer.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -63,6 +63,7 @@ EXPORT_SYMBOL(jiffies_64);
 #define TVR_SIZE (1 << TVR_BITS)
 #define TVN_MASK (TVN_SIZE - 1)
 #define TVR_MASK (TVR_SIZE - 1)
+#define MAX_TVAL ((unsigned long)((1ULL << (TVR_BITS + 4*TVN_BITS)) - 1))
 
 struct tvec {
 	struct list_head vec[TVN_SIZE];
@@ -358,11 +359,12 @@ __internal_add_timer(struct tvec_base *b
 		vec = base->tv1.vec + (base->timer_jiffies & TVR_MASK);
 	} else {
 		int i;
-		/* If the timeout is larger than 0xffffffff on 64-bit
-		 * architectures then we use the maximum timeout:
+		/* If the timeout is larger than MAX_TVAL (on 64-bit
+		 * architectures or with CONFIG_BASE_SMALL=1) then we
+		 * use the maximum timeout.
 		 */
-		if (idx > 0xffffffffUL) {
-			idx = 0xffffffffUL;
+		if (idx > MAX_TVAL) {
+			idx = MAX_TVAL;
 			expires = idx + base->timer_jiffies;
 		}
 		i = (expires >> (TVR_BITS + 3 * TVN_BITS)) & TVN_MASK;

[ 46/76] nohz: Fix one jiffy count too far in idle cputime

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Frederic Weisbecker <fweisbec@gmail.com>

commit 2b17c545a4cdbbbadcd7f1e9684c2d7db8f085a6 upstream.

When we stop the tick in idle, we save the current jiffies value
in ts->idle_jiffies. This snapshot is substracted from the later
value of jiffies when the tick is restarted and the resulting
delta is accounted as idle cputime. This is how we handle the
idle cputime accounting without the tick.

But sometimes we need to schedule the next tick to some time in
the future instead of completely stopping it. In this case, a
tick may happen before we restart the periodic behaviour and
from that tick we account one jiffy to idle cputime as usual but
we also increment the ts->idle_jiffies snapshot by one so that
when we compute the delta to account, we substract the one jiffy
we just accounted.

To prepare for stopping the tick outside idle, we introduced a
check that prevents from fixing up that ts->idle_jiffies if we
are not running the idle task. But we use idle_cpu() for that
and this is a problem if we run the tick while another CPU
remotely enqueues a ttwu to our runqueue:

CPU 0:                            CPU 1:

tick_sched_timer() {              ttwu_queue_remote()
       if (idle_cpu(CPU 0))
           ts->idle_jiffies++;
}

Here, idle_cpu() notes that &rq->wake_list is not empty and
hence won't consider the CPU as idle. As a result,
ts->idle_jiffies won't be incremented. But this is wrong because
we actually account the current jiffy to idle cputime. And that
jiffy won't get substracted from the nohz time delta. So in the
end, this jiffy is accounted twice.

Fix this by changing idle_cpu(smp_processor_id()) with
is_idle_task(current). This way the jiffy is substracted
correctly even if a ttwu operation is enqueued on the CPU.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1349308004-3482-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/tick-sched.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -835,7 +835,7 @@ static enum hrtimer_restart tick_sched_t
 		 */
 		if (ts->tick_stopped) {
 			touch_softlockup_watchdog();
-			if (idle_cpu(cpu))
+			if (is_idle_task(current))
 				ts->idle_jiffies++;
 		}
 		update_process_times(user_mode(regs));

[ 47/76] ath9k: use ieee80211_free_txskb

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@openwrt.org>

commit 249ee72249140fe5b9adc988f97298f0aa5db2fc upstream.

Using ieee80211_free_txskb for tx frames is required, since mac80211 clones
skbs for which socket tx status is requested.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/beacon.c |    2 -
 drivers/net/wireless/ath/ath9k/main.c   |    2 -
 drivers/net/wireless/ath/ath9k/xmit.c   |   53 +++++++++++++++++---------------
 3 files changed, 31 insertions(+), 26 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -120,7 +120,7 @@ static void ath9k_tx_cabq(struct ieee802
 
 	if (ath_tx_start(hw, skb, &txctl) != 0) {
 		ath_dbg(common, XMIT, "CABQ TX failed\n");
-		dev_kfree_skb_any(skb);
+		ieee80211_free_txskb(hw, skb);
 	}
 }
 
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -767,7 +767,7 @@ static void ath9k_tx(struct ieee80211_hw
 
 	return;
 exit:
-	dev_kfree_skb_any(skb);
+	ieee80211_free_txskb(hw, skb);
 }
 
 static void ath9k_stop(struct ieee80211_hw *hw)
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -66,8 +66,7 @@ static void ath_tx_update_baw(struct ath
 static struct ath_buf *ath_tx_setup_buffer(struct ath_softc *sc,
 					   struct ath_txq *txq,
 					   struct ath_atx_tid *tid,
-					   struct sk_buff *skb,
-					   bool dequeue);
+					   struct sk_buff *skb);
 
 enum {
 	MCS_HT20,
@@ -176,7 +175,15 @@ static void ath_tx_flush_tid(struct ath_
 		fi = get_frame_info(skb);
 		bf = fi->bf;
 
-		if (bf && fi->retries) {
+		if (!bf) {
+			bf = ath_tx_setup_buffer(sc, txq, tid, skb);
+			if (!bf) {
+				ieee80211_free_txskb(sc->hw, skb);
+				continue;
+			}
+		}
+
+		if (fi->retries) {
 			list_add_tail(&bf->list, &bf_head);
 			ath_tx_update_baw(sc, tid, bf->bf_state.seqno);
 			ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0);
@@ -785,10 +792,13 @@ static enum ATH_AGGR_STATUS ath_tx_form_
 		fi = get_frame_info(skb);
 		bf = fi->bf;
 		if (!fi->bf)
-			bf = ath_tx_setup_buffer(sc, txq, tid, skb, true);
+			bf = ath_tx_setup_buffer(sc, txq, tid, skb);
 
-		if (!bf)
+		if (!bf) {
+			__skb_unlink(skb, &tid->buf_q);
+			ieee80211_free_txskb(sc->hw, skb);
 			continue;
+		}
 
 		bf->bf_state.bf_type = BUF_AMPDU | BUF_AGGR;
 		seqno = bf->bf_state.seqno;
@@ -1731,9 +1741,11 @@ static void ath_tx_send_ampdu(struct ath
 		return;
 	}
 
-	bf = ath_tx_setup_buffer(sc, txctl->txq, tid, skb, false);
-	if (!bf)
+	bf = ath_tx_setup_buffer(sc, txctl->txq, tid, skb);
+	if (!bf) {
+		ieee80211_free_txskb(sc->hw, skb);
 		return;
+	}
 
 	bf->bf_state.bf_type = BUF_AMPDU;
 	INIT_LIST_HEAD(&bf_head);
@@ -1757,11 +1769,6 @@ static void ath_tx_send_normal(struct at
 	struct ath_buf *bf;
 
 	bf = fi->bf;
-	if (!bf)
-		bf = ath_tx_setup_buffer(sc, txq, tid, skb, false);
-
-	if (!bf)
-		return;
 
 	INIT_LIST_HEAD(&bf_head);
 	list_add_tail(&bf->list, &bf_head);
@@ -1834,8 +1841,7 @@ u8 ath_txchainmask_reduction(struct ath_
 static struct ath_buf *ath_tx_setup_buffer(struct ath_softc *sc,
 					   struct ath_txq *txq,
 					   struct ath_atx_tid *tid,
-					   struct sk_buff *skb,
-					   bool dequeue)
+					   struct sk_buff *skb)
 {
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_frame_info *fi = get_frame_info(skb);
@@ -1847,7 +1853,7 @@ static struct ath_buf *ath_tx_setup_buff
 	bf = ath_tx_get_buffer(sc);
 	if (!bf) {
 		ath_dbg(common, XMIT, "TX buffers are full\n");
-		goto error;
+		return NULL;
 	}
 
 	ATH_TXBUF_RESET(bf);
@@ -1876,18 +1882,12 @@ static struct ath_buf *ath_tx_setup_buff
 		ath_err(ath9k_hw_common(sc->sc_ah),
 			"dma_mapping_error() on TX\n");
 		ath_tx_return_buffer(sc, bf);
-		goto error;
+		return NULL;
 	}
 
 	fi->bf = bf;
 
 	return bf;
-
-error:
-	if (dequeue)
-		__skb_unlink(skb, &tid->buf_q);
-	dev_kfree_skb_any(skb);
-	return NULL;
 }
 
 /* FIXME: tx power */
@@ -1916,9 +1916,14 @@ static void ath_tx_start_dma(struct ath_
 		 */
 		ath_tx_send_ampdu(sc, tid, skb, txctl);
 	} else {
-		bf = ath_tx_setup_buffer(sc, txctl->txq, tid, skb, false);
-		if (!bf)
+		bf = ath_tx_setup_buffer(sc, txctl->txq, tid, skb);
+		if (!bf) {
+			if (txctl->paprd)
+				dev_kfree_skb_any(skb);
+			else
+				ieee80211_free_txskb(sc->hw, skb);
 			return;
+		}
 
 		bf->bf_state.bfs_paprd = txctl->paprd;
 

[ 48/76] mac80211: use ieee80211_free_txskb to fix possible skb leaks

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@openwrt.org>

commit c3e7724b6bc2f25e46c38dbe68f09d71fafeafb8 upstream.

A few places free skbs using dev_kfree_skb even though they're called
after ieee80211_subif_start_xmit might have cloned it for tracking tx
status. Use ieee80211_free_txskb here to prevent skb leaks.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/mac80211/status.c |    4 ++--
 net/mac80211/tx.c     |   22 ++++++++++++----------
 2 files changed, 14 insertions(+), 12 deletions(-)

--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -34,7 +34,7 @@ void ieee80211_tx_status_irqsafe(struct
 		skb_queue_len(&local->skb_queue_unreliable);
 	while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
 	       (skb = skb_dequeue(&local->skb_queue_unreliable))) {
-		dev_kfree_skb_irq(skb);
+		ieee80211_free_txskb(hw, skb);
 		tmp--;
 		I802_DEBUG_INC(local->tx_status_drop);
 	}
@@ -159,7 +159,7 @@ static void ieee80211_handle_filtered_fr
 			   "dropped TX filtered frame, queue_len=%d PS=%d @%lu\n",
 			   skb_queue_len(&sta->tx_filtered[ac]),
 			   !!test_sta_flag(sta, WLAN_STA_PS_STA), jiffies);
-	dev_kfree_skb(skb);
+	ieee80211_free_txskb(&local->hw, skb);
 }
 
 static void ieee80211_check_pending_bar(struct sta_info *sta, u8 *addr, u8 tid)
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -354,7 +354,7 @@ static void purge_old_ps_buffers(struct
 			total += skb_queue_len(&sta->ps_tx_buf[ac]);
 			if (skb) {
 				purged++;
-				dev_kfree_skb(skb);
+				ieee80211_free_txskb(&local->hw, skb);
 				break;
 			}
 		}
@@ -466,7 +466,7 @@ ieee80211_tx_h_unicast_ps_buf(struct iee
 			ps_dbg(tx->sdata,
 			       "STA %pM TX buffer for AC %d full - dropping oldest frame\n",
 			       sta->sta.addr, ac);
-			dev_kfree_skb(old);
+			ieee80211_free_txskb(&local->hw, old);
 		} else
 			tx->local->total_ps_buffered++;
 
@@ -1103,7 +1103,7 @@ static bool ieee80211_tx_prep_agg(struct
 		spin_unlock(&tx->sta->lock);
 
 		if (purge_skb)
-			dev_kfree_skb(purge_skb);
+			ieee80211_free_txskb(&tx->local->hw, purge_skb);
 	}
 
 	/* reset session timer */
@@ -1214,7 +1214,7 @@ static bool ieee80211_tx_frags(struct ie
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
 		if (WARN_ON_ONCE(q >= local->hw.queues)) {
 			__skb_unlink(skb, skbs);
-			dev_kfree_skb(skb);
+			ieee80211_free_txskb(&local->hw, skb);
 			continue;
 		}
 #endif
@@ -1356,7 +1356,7 @@ static int invoke_tx_handlers(struct iee
 	if (unlikely(res == TX_DROP)) {
 		I802_DEBUG_INC(tx->local->tx_handlers_drop);
 		if (tx->skb)
-			dev_kfree_skb(tx->skb);
+			ieee80211_free_txskb(&tx->local->hw, tx->skb);
 		else
 			__skb_queue_purge(&tx->skbs);
 		return -1;
@@ -1393,7 +1393,7 @@ static bool ieee80211_tx(struct ieee8021
 	res_prepare = ieee80211_tx_prepare(sdata, &tx, skb);
 
 	if (unlikely(res_prepare == TX_DROP)) {
-		dev_kfree_skb(skb);
+		ieee80211_free_txskb(&local->hw, skb);
 		goto out;
 	} else if (unlikely(res_prepare == TX_QUEUED)) {
 		goto out;
@@ -1466,7 +1466,7 @@ void ieee80211_xmit(struct ieee80211_sub
 	headroom = max_t(int, 0, headroom);
 
 	if (ieee80211_skb_resize(sdata, skb, headroom, may_encrypt)) {
-		dev_kfree_skb(skb);
+		ieee80211_free_txskb(&local->hw, skb);
 		rcu_read_unlock();
 		return;
 	}
@@ -2060,8 +2060,10 @@ netdev_tx_t ieee80211_subif_start_xmit(s
 		head_need += IEEE80211_ENCRYPT_HEADROOM;
 		head_need += local->tx_headroom;
 		head_need = max_t(int, 0, head_need);
-		if (ieee80211_skb_resize(sdata, skb, head_need, true))
-			goto fail;
+		if (ieee80211_skb_resize(sdata, skb, head_need, true)) {
+			ieee80211_free_txskb(&local->hw, skb);
+			return NETDEV_TX_OK;
+		}
 	}
 
 	if (encaps_data) {
@@ -2196,7 +2198,7 @@ void ieee80211_tx_pending(unsigned long
 			struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
 			if (WARN_ON(!info->control.vif)) {
-				kfree_skb(skb);
+				ieee80211_free_txskb(&local->hw, skb);
 				continue;
 			}
 

[ 49/76] md/raid10: use correct limit variable

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 91502f099dfc5a1e8812898e26ee280713e1d002 upstream.

Clang complains that we are assigning a variable to itself.  This should
be using bad_sectors like the similar earlier check does.

Bug has been present since 3.1-rc1.  It is minor but could
conceivably cause corruption or other bad behaviour.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/raid10.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -3158,7 +3158,7 @@ static sector_t sync_request(struct mdde
 				else {
 					bad_sectors -= (sector - first_bad);
 					if (max_sync > bad_sectors)
-						max_sync = max_sync;
+						max_sync = bad_sectors;
 					continue;
 				}
 			}

[ 50/76] kdb,vt_console: Fix missed data due to pager overruns

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Wessel <jason.wessel@windriver.com>

commit 17b572e82032bc246324ce136696656b66d4e3f1 upstream.

It is possible to miss data when using the kdb pager.  The kdb pager
does not pay attention to the maximum column constraint of the screen
or serial terminal.  This result is not incrementing the shown lines
correctly and the pager will print more lines that fit on the screen.
Obviously that is less than useful when using a VGA console where you
cannot scroll back.

The pager will now look at the kdb_buffer string to see how many
characters are printed.  It might not be perfect considering you can
output ASCII that might move the cursor position, but it is a
substantially better approximation for viewing dmesg and trace logs.

This also means that the vt screen needs to set the kdb COLUMNS
variable.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/vt/vt.c       |   13 +++++++++++++
 kernel/debug/kdb/kdb_io.c |   33 ++++++++++++++++++++++++++++-----
 2 files changed, 41 insertions(+), 5 deletions(-)

--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3475,6 +3475,19 @@ int con_debug_enter(struct vc_data *vc)
 			kdb_set(2, setargs);
 		}
 	}
+	if (vc->vc_cols < 999) {
+		int colcount;
+		char cols[4];
+		const char *setargs[3] = {
+			"set",
+			"COLUMNS",
+			cols,
+		};
+		if (kdbgetintenv(setargs[0], &colcount)) {
+			snprintf(cols, 4, "%i", vc->vc_cols);
+			kdb_set(2, setargs);
+		}
+	}
 #endif /* CONFIG_KGDB_KDB */
 	return ret;
 }
--- a/kernel/debug/kdb/kdb_io.c
+++ b/kernel/debug/kdb/kdb_io.c
@@ -552,6 +552,7 @@ int vkdb_printf(const char *fmt, va_list
 {
 	int diag;
 	int linecount;
+	int colcount;
 	int logging, saved_loglevel = 0;
 	int saved_trap_printk;
 	int got_printf_lock = 0;
@@ -584,6 +585,10 @@ int vkdb_printf(const char *fmt, va_list
 	if (diag || linecount <= 1)
 		linecount = 24;
 
+	diag = kdbgetintenv("COLUMNS", &colcount);
+	if (diag || colcount <= 1)
+		colcount = 80;
+
 	diag = kdbgetintenv("LOGGING", &logging);
 	if (diag)
 		logging = 0;
@@ -690,7 +695,7 @@ kdb_printit:
 		gdbstub_msg_write(kdb_buffer, retlen);
 	} else {
 		if (dbg_io_ops && !dbg_io_ops->is_console) {
-			len = strlen(kdb_buffer);
+			len = retlen;
 			cp = kdb_buffer;
 			while (len--) {
 				dbg_io_ops->write_char(*cp);
@@ -709,11 +714,29 @@ kdb_printit:
 		printk(KERN_INFO "%s", kdb_buffer);
 	}
 
-	if (KDB_STATE(PAGER) && strchr(kdb_buffer, '\n'))
-		kdb_nextline++;
+	if (KDB_STATE(PAGER)) {
+		/*
+		 * Check printed string to decide how to bump the
+		 * kdb_nextline to control when the more prompt should
+		 * show up.
+		 */
+		int got = 0;
+		len = retlen;
+		while (len--) {
+			if (kdb_buffer[len] == '\n') {
+				kdb_nextline++;
+				got = 0;
+			} else if (kdb_buffer[len] == '\r') {
+				got = 0;
+			} else {
+				got++;
+			}
+		}
+		kdb_nextline += got / (colcount + 1);
+	}
 
 	/* check for having reached the LINES number of printed lines */
-	if (kdb_nextline == linecount) {
+	if (kdb_nextline >= linecount) {
 		char buf1[16] = "";
 
 		/* Watch out for recursion here.  Any routine that calls
@@ -765,7 +788,7 @@ kdb_printit:
 			kdb_grepping_flag = 0;
 			kdb_printf("\n");
 		} else if (buf1[0] == ' ') {
-			kdb_printf("\n");
+			kdb_printf("\r");
 			suspend_grep = 1; /* for this recursion */
 		} else if (buf1[0] == '\n') {
 			kdb_nextline = linecount - 1;

[ 51/76] pktgen: fix crash when generating IPv6 packets

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Amerigo Wang <amwang@redhat.com>

commit 5aa8b572007c4bca1e6d3dd4c4820f1ae49d6bb2 upstream.

For IPv6, sizeof(struct ipv6hdr) = 40, thus the following
expression will result negative:

        datalen = pkt_dev->cur_pkt_size - 14 -
                  sizeof(struct ipv6hdr) - sizeof(struct udphdr) -
                  pkt_dev->pkt_overhead;

And,  the check "if (datalen < sizeof(struct pktgen_hdr))" will be
passed as "datalen" is promoted to unsigned, therefore will cause
a crash later.

This is a quick fix by checking if "datalen" is negative. The following
patch will increase the default value of 'min_pkt_size' for IPv6.

This bug should exist for a long time, so Cc -stable too.

Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/core/pktgen.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -2927,7 +2927,7 @@ static struct sk_buff *fill_packet_ipv6(
 		  sizeof(struct ipv6hdr) - sizeof(struct udphdr) -
 		  pkt_dev->pkt_overhead;
 
-	if (datalen < sizeof(struct pktgen_hdr)) {
+	if (datalen < 0 || datalen < sizeof(struct pktgen_hdr)) {
 		datalen = sizeof(struct pktgen_hdr);
 		net_info_ratelimited("increased datalen to %d\n", datalen);
 	}

[ 52/76] MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gabor Juhos <juhosg@openwrt.org>

commit 97541ccfb9db2bb9cd1dde6344d5834438d14bda upstream.

Besides the CPU and DDR PLLs, the CPU and DDR frequencies
can be derived from other PLLs in the SRIF block on the
AR934x SoCs. The current code does not checks if the SRIF
PLLs are used and this can lead to incorrectly calculated
CPU/DDR frequencies.

Fix it by calculating the frequencies from SRIF PLLs if
those are used on a given board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4324/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/ath79/clock.c                        |  109 ++++++++++++++++++-------
 arch/mips/include/asm/mach-ath79/ar71xx_regs.h |   23 +++++
 2 files changed, 104 insertions(+), 28 deletions(-)

--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -17,6 +17,8 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
+#include <asm/div64.h>
+
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
 #include "common.h"
@@ -166,11 +168,34 @@ static void __init ar933x_clocks_init(vo
 	ath79_uart_clk.rate = ath79_ref_clk.rate;
 }
 
+static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
+				      u32 frac, u32 out_div)
+{
+	u64 t;
+	u32 ret;
+
+	t = ath79_ref_clk.rate;
+	t *= nint;
+	do_div(t, ref_div);
+	ret = t;
+
+	t = ath79_ref_clk.rate;
+	t *= nfrac;
+	do_div(t, ref_div * frac);
+	ret += t;
+
+	ret /= (1 << out_div);
+	return ret;
+}
+
 static void __init ar934x_clocks_init(void)
 {
-	u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
+	u32 pll, out_div, ref_div, nint, nfrac, frac, clk_ctrl, postdiv;
 	u32 cpu_pll, ddr_pll;
 	u32 bootstrap;
+	void __iomem *dpll_base;
+
+	dpll_base = ioremap(AR934X_SRIF_BASE, AR934X_SRIF_SIZE);
 
 	bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
 	if (bootstrap &	AR934X_BOOTSTRAP_REF_CLK_40)
@@ -178,33 +203,59 @@ static void __init ar934x_clocks_init(vo
 	else
 		ath79_ref_clk.rate = 25 * 1000 * 1000;
 
-	pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
-	out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
-		  AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
-	ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-		  AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
-	nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
-	       AR934X_PLL_CPU_CONFIG_NINT_MASK;
-	frac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
-	       AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
-
-	cpu_pll = nint * ath79_ref_clk.rate / ref_div;
-	cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 6));
-	cpu_pll /= (1 << out_div);
-
-	pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
-	out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
-		  AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
-	ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-		  AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
-	nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
-	       AR934X_PLL_DDR_CONFIG_NINT_MASK;
-	frac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
-	       AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
-
-	ddr_pll = nint * ath79_ref_clk.rate / ref_div;
-	ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 10));
-	ddr_pll /= (1 << out_div);
+	pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL2_REG);
+	if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
+		out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
+			  AR934X_SRIF_DPLL2_OUTDIV_MASK;
+		pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL1_REG);
+		nint = (pll >> AR934X_SRIF_DPLL1_NINT_SHIFT) &
+		       AR934X_SRIF_DPLL1_NINT_MASK;
+		nfrac = pll & AR934X_SRIF_DPLL1_NFRAC_MASK;
+		ref_div = (pll >> AR934X_SRIF_DPLL1_REFDIV_SHIFT) &
+			  AR934X_SRIF_DPLL1_REFDIV_MASK;
+		frac = 1 << 18;
+	} else {
+		pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
+		out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+			AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
+		ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+			  AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
+		nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
+		       AR934X_PLL_CPU_CONFIG_NINT_MASK;
+		nfrac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
+			AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
+		frac = 1 << 6;
+	}
+
+	cpu_pll = ar934x_get_pll_freq(ath79_ref_clk.rate, ref_div, nint,
+				      nfrac, frac, out_div);
+
+	pll = __raw_readl(dpll_base + AR934X_SRIF_DDR_DPLL2_REG);
+	if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
+		out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
+			  AR934X_SRIF_DPLL2_OUTDIV_MASK;
+		pll = __raw_readl(dpll_base + AR934X_SRIF_DDR_DPLL1_REG);
+		nint = (pll >> AR934X_SRIF_DPLL1_NINT_SHIFT) &
+		       AR934X_SRIF_DPLL1_NINT_MASK;
+		nfrac = pll & AR934X_SRIF_DPLL1_NFRAC_MASK;
+		ref_div = (pll >> AR934X_SRIF_DPLL1_REFDIV_SHIFT) &
+			  AR934X_SRIF_DPLL1_REFDIV_MASK;
+		frac = 1 << 18;
+	} else {
+		pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
+		out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+			  AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
+		ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+			   AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
+		nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
+		       AR934X_PLL_DDR_CONFIG_NINT_MASK;
+		nfrac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
+			AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
+		frac = 1 << 10;
+	}
+
+	ddr_pll = ar934x_get_pll_freq(ath79_ref_clk.rate, ref_div, nint,
+				      nfrac, frac, out_div);
 
 	clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
 
@@ -240,6 +291,8 @@ static void __init ar934x_clocks_init(vo
 
 	ath79_wdt_clk.rate = ath79_ref_clk.rate;
 	ath79_uart_clk.rate = ath79_ref_clk.rate;
+
+	iounmap(dpll_base);
 }
 
 void __init ath79_clocks_init(void)
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -63,6 +63,8 @@
 
 #define AR934X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
 #define AR934X_WMAC_SIZE	0x20000
+#define AR934X_SRIF_BASE	(AR71XX_APB_BASE + 0x00116000)
+#define AR934X_SRIF_SIZE	0x1000
 
 /*
  * DDR_CTRL block
@@ -399,4 +401,25 @@
 #define AR933X_GPIO_COUNT		30
 #define AR934X_GPIO_COUNT		23
 
+/*
+ * SRIF block
+ */
+#define AR934X_SRIF_CPU_DPLL1_REG	0x1c0
+#define AR934X_SRIF_CPU_DPLL2_REG	0x1c4
+#define AR934X_SRIF_CPU_DPLL3_REG	0x1c8
+
+#define AR934X_SRIF_DDR_DPLL1_REG	0x240
+#define AR934X_SRIF_DDR_DPLL2_REG	0x244
+#define AR934X_SRIF_DDR_DPLL3_REG	0x248
+
+#define AR934X_SRIF_DPLL1_REFDIV_SHIFT	27
+#define AR934X_SRIF_DPLL1_REFDIV_MASK	0x1f
+#define AR934X_SRIF_DPLL1_NINT_SHIFT	18
+#define AR934X_SRIF_DPLL1_NINT_MASK	0x1ff
+#define AR934X_SRIF_DPLL1_NFRAC_MASK	0x0003ffff
+
+#define AR934X_SRIF_DPLL2_LOCAL_PLL	BIT(30)
+#define AR934X_SRIF_DPLL2_OUTDIV_SHIFT	13
+#define AR934X_SRIF_DPLL2_OUTDIV_MASK	0x7
+
 #endif /* __ASM_MACH_AR71XX_REGS_H */

[ 53/76] kbuild: Fix accidental revert in commit fe04ddf

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Marek <mmarek@suse.cz>

commit 3ce9e53e788881da0d5f3912f80e0dd6b501f304 upstream.

Commit fe04ddf7c291 ("kbuild: Do not package /boot and /lib in make
tar-pkg") accidentally reverted two previous kbuild commits.  I don't
know what I was thinking.

This brings back changes made by commits 24cc7fb69a5b ("x86/kbuild:
archscripts depends on scripts_basic") and c1c1a59e37da ("firmware: fix
directory creation rule matching with make 3.80")

Reported-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/Makefile       |    2 +-
 scripts/Makefile.fwinst |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -142,7 +142,7 @@ KBUILD_CFLAGS += $(call cc-option,-mno-a
 KBUILD_CFLAGS += $(mflags-y)
 KBUILD_AFLAGS += $(mflags-y)
 
-archscripts:
+archscripts: scripts_basic
 	$(Q)$(MAKE) $(build)=arch/x86/tools relocs
 
 ###
--- a/scripts/Makefile.fwinst
+++ b/scripts/Makefile.fwinst
@@ -27,7 +27,7 @@ endif
 installed-mod-fw := $(addprefix $(INSTALL_FW_PATH)/,$(mod-fw))
 
 installed-fw := $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-all))
-installed-fw-dirs := $(sort $(dir $(installed-fw))) $(INSTALL_FW_PATH)/.
+installed-fw-dirs := $(sort $(dir $(installed-fw))) $(INSTALL_FW_PATH)/./
 
 # Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
 PHONY += $(INSTALL_FW_PATH)/$$(%) install-all-dirs
@@ -42,7 +42,7 @@ quiet_cmd_install = INSTALL $(subst $(sr
 $(installed-fw-dirs):
 	$(call cmd,mkdir)
 
-$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $$(dir $(INSTALL_FW_PATH)/%)
+$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $(INSTALL_FW_PATH)/$$(dir %)
 	$(call cmd,install)
 
 PHONY +=  __fw_install __fw_modinst FORCE

[ 54/76] Add CDC-ACM support for the CX93010-2x UCMxx USB Modem

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jean-Christian de Rivaz <jc@eclis.ch>

commit e7d491a19d3e3aac544070293891a2542ae0c565 upstream.

This USB V.92/V.32bis Controllered Modem have the USB vendor ID 0x0572
and device ID 0x1340. It need the NO_UNION_NORMAL quirk to be recognized.

Reference:
http://www.conexant.com/servlets/DownloadServlet/DSH-201723-005.pdf?docid=1725&revid=5
See idVendor and idProduct in table 6-1. Device Descriptors

Signed-off-by: Jean-Christian de Rivaz <jc@eclis.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-acm.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1551,6 +1551,9 @@ static const struct usb_device_id acm_id
 					   Maybe we should define a new
 					   quirk for this. */
 	},
+	{ USB_DEVICE(0x0572, 0x1340), /* Conexant CX93010-2x UCMxx */
+	.driver_info = NO_UNION_NORMAL,
+	},
 	{ USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
 	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
 	},

[ 55/76] fs: handle failed audit_log_start properly

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sasha Levin <sasha.levin@oracle.com>

commit d1c7d97ad58836affde6e39980b96527510b572e upstream.

audit_log_start() may return NULL, this is unchecked by the caller in
audit_log_link_denied() and could cause a NULL ptr deref.

Introduced by commit a51d9eaa ("fs: add link restriction audit reporting").

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/audit.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -1466,6 +1466,8 @@ void audit_log_link_denied(const char *o
 
 	ab = audit_log_start(current->audit_context, GFP_KERNEL,
 			     AUDIT_ANOM_LINK);
+	if (!ab)
+		return;
 	audit_log_format(ab, "op=%s action=denied", operation);
 	audit_log_format(ab, " pid=%d comm=", current->pid);
 	audit_log_untrustedstring(ab, current->comm);

[ 56/76] fs: prevent use after free in auditing when symlink following was denied

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sasha Levin <sasha.levin@oracle.com>

commit ffd8d101a3a7d3f2e79deee1e342801703b6dc70 upstream.

Commit "fs: add link restriction audit reporting" has added auditing of failed
attempts to follow symlinks. Unfortunately, the auditing was being done after
the struct path structure was released earlier.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/namei.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/namei.c
+++ b/fs/namei.c
@@ -692,9 +692,9 @@ static inline int may_follow_link(struct
 	if (parent->i_uid == inode->i_uid)
 		return 0;
 
+	audit_log_link_denied("follow_link", link);
 	path_put_conditional(link, nd);
 	path_put(&nd->path);
-	audit_log_link_denied("follow_link", link);
 	return -EACCES;
 }
 

[ 57/76] drm/radeon: Dont destroy I2C Bus Rec in radeon_ext_tmds_enc_destroy().

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Egbert Eich <eich@suse.de>

commit 082918471139b07964967cfe5f70230909c82ae1 upstream.

radeon_i2c_fini() walks thru the list of I2C bus recs rdev->i2c_bus[]
to destroy each of them.
radeon_ext_tmds_enc_destroy() however also has code to destroy it's
associated I2C bus rec which has been obtained by radeon_i2c_lookup()
and is therefore also in the i2c_bus[] list.
This causes a double free resulting in a kernel panic when unloading
the radeon driver.
Removing destroy code from radeon_ext_tmds_enc_destroy() fixes this
problem.

agd5f: fix compiler warning

Signed-off-by: Egbert Eich <eich@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_legacy_encoders.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -974,11 +974,7 @@ static void radeon_legacy_tmds_ext_mode_
 static void radeon_ext_tmds_enc_destroy(struct drm_encoder *encoder)
 {
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_encoder_ext_tmds *tmds = radeon_encoder->enc_priv;
-	if (tmds) {
-		if (tmds->i2c_bus)
-			radeon_i2c_destroy(tmds->i2c_bus);
-	}
+	/* don't destroy the i2c bus record here, this will be done in radeon_i2c_fini */
 	kfree(radeon_encoder->enc_priv);
 	drm_encoder_cleanup(encoder);
 	kfree(radeon_encoder);

[ 58/76] drm/i915: remove useless BUG_ON which caused a regression in 3.5.

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Willy Tarreau <w@1wt.eu>

commit c77d7162a7ae451c2e895d7ef7fbeb0906107472 upstream.

starting an old X server causes a kernel BUG since commit 1b50247a8d:

------------[ cut here ]------------
kernel BUG at drivers/gpu/drm/i915/i915_gem.c:3661!
invalid opcode: 0000 [#1] SMP
Modules linked in: snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss uvcvideo
+videobuf2_core videodev videobuf2_vmalloc videobuf2_memops uhci_hcd ath9k mac80211 snd_hda_codec_realtek ath9k_common microcode
+ath9k_hw psmouse serio_raw sg ath cfg80211 atl1c lpc_ich mfd_core ehci_hcd snd_hda_intel snd_hda_codec snd_hwdep snd_pcm rtc_cmos
+snd_timer snd evdev eeepc_laptop snd_page_alloc sparse_keymap

Pid: 2866, comm: X Not tainted 3.5.6-rc1-eeepc #1 ASUSTeK Computer INC. 1005HA/1005HA
EIP: 0060:[<c12dc291>] EFLAGS: 00013297 CPU: 0
EIP is at i915_gem_entervt_ioctl+0xf1/0x110
EAX: f5941df4 EBX: f5940000 ECX: 00000000 EDX: 00020000
ESI: f5835400 EDI: 00000000 EBP: f51d7e38 ESP: f51d7e20
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: b760e0a0 CR3: 351b6000 CR4: 000007d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Process X (pid: 2866, ti=f51d6000 task=f61af8d0 task.ti=f51d6000)
Stack:
 00000001 00000000 f5835414 f51d7e84 f5835400 f54f85c0 f51d7f10 c12b530b
 00000001 c151b139 c14751b6 c152e030 00000b32 00006459 00000059 0000e200
 00000001 00000000 00006459 c159ddd0 c12dc1a0 ffffffea 00000000 00000000
Call Trace:
 [<c12b530b>] drm_ioctl+0x2eb/0x440
 [<c12dc1a0>] ? i915_gem_init+0xe0/0xe0
 [<c1052b2b>] ? enqueue_hrtimer+0x1b/0x50
 [<c1053321>] ? __hrtimer_start_range_ns+0x161/0x330
 [<c10530b3>] ? lock_hrtimer_base+0x23/0x50
 [<c1053163>] ? hrtimer_try_to_cancel+0x33/0x70
 [<c12b5020>] ? drm_version+0x90/0x90
 [<c10ca171>] vfs_ioctl+0x31/0x50
 [<c10ca2e4>] do_vfs_ioctl+0x64/0x510
 [<c10535de>] ? hrtimer_nanosleep+0x8e/0x100
 [<c1052c20>] ? update_rmtp+0x80/0x80
 [<c10ca7c9>] sys_ioctl+0x39/0x60
 [<c1433949>] syscall_call+0x7/0xb
Code: 83 c4 0c 5b 5e 5f 5d c3 c7 44 24 04 2c 05 53 c1 c7 04 24 6f ef 47 c1 e8 6e e0 fd ff c7 83 38 1e 00 00 00 00 00 00 e9 3f ff ff
+ff <0f> 0b eb fe 0f 0b eb fe 8d b4 26 00 00 00 00 0f 0b eb fe 8d b6
EIP: [<c12dc291>] i915_gem_entervt_ioctl+0xf1/0x110 SS:ESP 0068:f51d7e20
---[ end trace dd332ec083cbd513 ]---

The crash happens here in i915_gem_entervt_ioctl() :

    3659          BUG_ON(!list_empty(&dev_priv->mm.active_list));
    3660          BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
 -> 3661          BUG_ON(!list_empty(&dev_priv->mm.inactive_list));
    3662          mutex_unlock(&dev->struct_mutex);

Quoting Chris :
  "That BUG_ON there is silly and can simply be removed. The check is to
   verify that no batches were submitted to the kernel whilst the UMS/GEM
   client was suspended - to which the BUG_ONs are a crude approximation.
   Furthermore, the checks are too late, since it means we attempted to
   program the hardware whilst it was in an invalid state, the BUG_ONs are
   the least of your concerns at that point."

Note that this regression has been introduced in

commit 1b50247a8ddde4af5aaa0e6bc125615372ce6c16
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Apr 24 15:47:30 2012 +0100

    drm/i915: Remove the list of pinned inactive objects

Signed-off-by: Willy Tarreau <w@1wt.eu>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Added note about the regressing commit and cc: stable.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_gem.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3893,7 +3893,6 @@ i915_gem_entervt_ioctl(struct drm_device
 
 	BUG_ON(!list_empty(&dev_priv->mm.active_list));
 	BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
-	BUG_ON(!list_empty(&dev_priv->mm.inactive_list));
 	mutex_unlock(&dev->struct_mutex);
 
 	ret = drm_irq_install(dev);

[ 59/76] drm/i915: Set guardband clipping workaround bit in the right register.

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kenneth Graunke <kenneth@whitecape.org>

commit 26b6e44afb58432a5e998da0343757404f9de9ee upstream.

A previous patch, namely:

commit bf97b276ca04cee9ab65ffd378fa8e6aedd71ff6
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Apr 11 20:42:41 2012 +0200

    drm/i915: implement w/a for incorrect guarband clipping

accidentally set bit 5 in 3D_CHICKEN, which has nothing to do with
clipping.  This patch changes it to be set in 3D_CHICKEN3, where it
belongs.

The game "Dante" demonstrates random clipping issues when guardband
clipping is enabled and bit 5 of 3D_CHICKEN3 isn't set.  So the
workaround is actually necessary.

Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Oliver McFadden <oliver.mcfadden@linux.intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_reg.h |    2 +-
 drivers/gpu/drm/i915/intel_pm.c |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -513,7 +513,7 @@
  */
 # define _3D_CHICKEN2_WM_READ_PIPELINED			(1 << 14)
 #define _3D_CHICKEN3	0x02090
-#define  _3D_CHICKEN_SF_DISABLE_FASTCLIP_CULL		(1 << 5)
+#define  _3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL		(1 << 5)
 
 #define MI_MODE		0x0209c
 # define VS_TIMER_DISPATCH				(1 << 6)
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3355,8 +3355,8 @@ static void gen6_init_clock_gating(struc
 		   GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
 
 	/* Bspec says we need to always set all mask bits. */
-	I915_WRITE(_3D_CHICKEN, (0xFFFF << 16) |
-		   _3D_CHICKEN_SF_DISABLE_FASTCLIP_CULL);
+	I915_WRITE(_3D_CHICKEN3, (0xFFFF << 16) |
+		   _3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL);
 
 	/*
 	 * According to the spec the following bits should be

[ 60/76] drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Skeggs <bskeggs@redhat.com>

commit 9a334cd0de2f43b29c192548000692bad52edfc6 upstream.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/nouveau/nouveau_bios.c |   22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -196,24 +196,22 @@ static void
 bios_shadow_acpi(struct nvbios *bios)
 {
 	struct pci_dev *pdev = bios->dev->pdev;
-	int cnt = 65536 / ROM_BIOS_PAGE;
-	int ret;
+	int ret, cnt, i;
+	u8  data[3];
 
 	if (!nouveau_acpi_rom_supported(pdev))
 		return;
 
-	bios->data = kmalloc(cnt * ROM_BIOS_PAGE, GFP_KERNEL);
-	if (!bios->data)
-		return;
-
 	bios->length = 0;
-	while (cnt--) {
-		ret = nouveau_acpi_get_bios_chunk(bios->data, bios->length,
-						  ROM_BIOS_PAGE);
-		if (ret != ROM_BIOS_PAGE)
-			return;
+	if (nouveau_acpi_get_bios_chunk(data, 0, 3) == 3)
+		bios->length = data[2] * 512;
 
-		bios->length += ROM_BIOS_PAGE;
+	bios->data = kmalloc(bios->length, GFP_KERNEL);
+	for (i = 0; bios->data && i < bios->length; i += cnt) {
+		cnt = min((bios->length - i), (u32)4096);
+		ret = nouveau_acpi_get_bios_chunk(bios->data, i, cnt);
+		if (ret != cnt)
+			break;
 	}
 }
 

[ 61/76] drm/i915: use adjusted_mode instead of mode for checking the 6bpc force flag

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jani Nikula <jani.nikula@intel.com>

commit 0c96c65b48fba3ffe9822a554cbc0cd610765cd5 upstream.

The dithering introduced in

commit 3b5c78a35cf7511c15e09a9b0ffab290a42d9bcf
Author: Adam Jackson <ajax@redhat.com>
Date:   Tue Dec 13 15:41:00 2011 -0800

    drm/i915/dp: Dither down to 6bpc if it makes the mode fit

stores the INTEL_MODE_DP_FORCE_6BPC flag in the private_flags of the
adjusted mode, while i9xx_crtc_mode_set() and ironlake_crtc_mode_set() use
the original mode, without the flag, so it would never have any
effect. However, the BPC was clamped by VBT settings, making things work by
coincidence, until that part was removed in

commit 4344b813f105a19f793f1fd93ad775b784648b95
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Aug 10 11:10:20 2012 +0200

Use adjusted_mode instead of mode when checking for
INTEL_MODE_DP_FORCE_6BPC to make the flag have effect.

v2: Don't forget to fix this in i9xx_crtc_mode_set() also, pointed out by
Daniel both before and after sending the first patch.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47621
CC: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/gpu/drm/i915/intel_display.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4351,7 +4351,7 @@ static int i9xx_crtc_mode_set(struct drm
 	/* default to 8bpc */
 	pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
 	if (is_dp) {
-		if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
+		if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
 			pipeconf |= PIPECONF_BPP_6 |
 				    PIPECONF_DITHER_EN |
 				    PIPECONF_DITHER_TYPE_SP;
@@ -4705,7 +4705,7 @@ static int ironlake_crtc_mode_set(struct
 	/* determine panel color depth */
 	temp = I915_READ(PIPECONF(pipe));
 	temp &= ~PIPE_BPC_MASK;
-	dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode);
+	dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, adjusted_mode);
 	switch (pipe_bpp) {
 	case 18:
 		temp |= PIPE_6BPC;

[ 62/76] mcs7830: Fix link state detection

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ondrej Zary <linux@rainbow-software.org>

commit dabdaf0caa3af520dbc1df87b2fb4e77224037bd upstream.

The device had an undocumented "feature": it can provide a sequence of
spurious link-down status data even if the link is up all the time.
A sequence of 10 was seen so update the link state only after the device
reports the same link state 20 times.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reported-by: Michael Leun <lkml20120218@newton.leun.net>
Tested-by: Michael Leun <lkml20120218@newton.leun.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/usb/mcs7830.c |   30 +++++++++++++++++++++---------
 1 file changed, 21 insertions(+), 9 deletions(-)

--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -117,6 +117,7 @@ enum {
 struct mcs7830_data {
 	u8 multi_filter[8];
 	u8 config;
+	u8 link_counter;
 };
 
 static const char driver_name[] = "MOSCHIP usb-ethernet driver";
@@ -632,20 +633,31 @@ static int mcs7830_rx_fixup(struct usbne
 static void mcs7830_status(struct usbnet *dev, struct urb *urb)
 {
 	u8 *buf = urb->transfer_buffer;
-	bool link;
+	bool link, link_changed;
+	struct mcs7830_data *data = mcs7830_get_data(dev);
 
 	if (urb->actual_length < 16)
 		return;
 
 	link = !(buf[1] & 0x20);
-	if (netif_carrier_ok(dev->net) != link) {
-		if (link) {
-			netif_carrier_on(dev->net);
-			usbnet_defer_kevent(dev, EVENT_LINK_RESET);
-		} else
-			netif_carrier_off(dev->net);
-		netdev_dbg(dev->net, "Link Status is: %d\n", link);
-	}
+	link_changed = netif_carrier_ok(dev->net) != link;
+	if (link_changed) {
+		data->link_counter++;
+		/*
+		   track link state 20 times to guard against erroneous
+		   link state changes reported sometimes by the chip
+		 */
+		if (data->link_counter > 20) {
+			data->link_counter = 0;
+			if (link) {
+				netif_carrier_on(dev->net);
+				usbnet_defer_kevent(dev, EVENT_LINK_RESET);
+			} else
+				netif_carrier_off(dev->net);
+			netdev_dbg(dev->net, "Link Status is: %d\n", link);
+		}
+	} else
+		data->link_counter = 0;
 }
 
 static const struct driver_info moschip_info = {

[ 63/76] jbd: Fix assertion failure in commit code due to lacking transaction credits

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 09e05d4805e6c524c1af74e524e5d0528bb3fef3 upstream.

ext3 users of data=journal mode with blocksize < pagesize were occasionally
hitting assertion failure in journal_commit_transaction() checking whether the
transaction has at least as many credits reserved as buffers attached.  The
core of the problem is that when a file gets truncated, buffers that still need
checkpointing or that are attached to the committing transaction are left with
buffer_mapped set. When this happens to buffers beyond i_size attached to a
page stradding i_size, subsequent write extending the file will see these
buffers and as they are mapped (but underlying blocks were freed) things go
awry from here.

The assertion failure just coincidentally (and in this case luckily as we would
start corrupting filesystem) triggers due to journal_head not being properly
cleaned up as well.

Under some rare circumstances this bug could even hit data=ordered mode users.
There the assertion won't trigger and we would end up corrupting the
filesystem.

We fix the problem by unmapping buffers if possible (in lots of cases we just
need a buffer attached to a transaction as a place holder but it must not be
written out anyway). And in one case, we just have to bite the bullet and wait
for transaction commit to finish.

Reviewed-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/jbd/commit.c      |   45 +++++++++++++++++++++++++++--------
 fs/jbd/transaction.c |   64 +++++++++++++++++++++++++++++++++++----------------
 2 files changed, 78 insertions(+), 31 deletions(-)

--- a/fs/jbd/commit.c
+++ b/fs/jbd/commit.c
@@ -86,7 +86,12 @@ nope:
 static void release_data_buffer(struct buffer_head *bh)
 {
 	if (buffer_freed(bh)) {
+		WARN_ON_ONCE(buffer_dirty(bh));
 		clear_buffer_freed(bh);
+		clear_buffer_mapped(bh);
+		clear_buffer_new(bh);
+		clear_buffer_req(bh);
+		bh->b_bdev = NULL;
 		release_buffer_page(bh);
 	} else
 		put_bh(bh);
@@ -866,17 +871,35 @@ restart_loop:
 		 * there's no point in keeping a checkpoint record for
 		 * it. */
 
-		/* A buffer which has been freed while still being
-		 * journaled by a previous transaction may end up still
-		 * being dirty here, but we want to avoid writing back
-		 * that buffer in the future after the "add to orphan"
-		 * operation been committed,  That's not only a performance
-		 * gain, it also stops aliasing problems if the buffer is
-		 * left behind for writeback and gets reallocated for another
-		 * use in a different page. */
-		if (buffer_freed(bh) && !jh->b_next_transaction) {
-			clear_buffer_freed(bh);
-			clear_buffer_jbddirty(bh);
+		/*
+		 * A buffer which has been freed while still being journaled by
+		 * a previous transaction.
+		 */
+		if (buffer_freed(bh)) {
+			/*
+			 * If the running transaction is the one containing
+			 * "add to orphan" operation (b_next_transaction !=
+			 * NULL), we have to wait for that transaction to
+			 * commit before we can really get rid of the buffer.
+			 * So just clear b_modified to not confuse transaction
+			 * credit accounting and refile the buffer to
+			 * BJ_Forget of the running transaction. If the just
+			 * committed transaction contains "add to orphan"
+			 * operation, we can completely invalidate the buffer
+			 * now. We are rather throughout in that since the
+			 * buffer may be still accessible when blocksize <
+			 * pagesize and it is attached to the last partial
+			 * page.
+			 */
+			jh->b_modified = 0;
+			if (!jh->b_next_transaction) {
+				clear_buffer_freed(bh);
+				clear_buffer_jbddirty(bh);
+				clear_buffer_mapped(bh);
+				clear_buffer_new(bh);
+				clear_buffer_req(bh);
+				bh->b_bdev = NULL;
+			}
 		}
 
 		if (buffer_jbddirty(bh)) {
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -1843,15 +1843,16 @@ static int __dispose_buffer(struct journ
  * We're outside-transaction here.  Either or both of j_running_transaction
  * and j_committing_transaction may be NULL.
  */
-static int journal_unmap_buffer(journal_t *journal, struct buffer_head *bh)
+static int journal_unmap_buffer(journal_t *journal, struct buffer_head *bh,
+				int partial_page)
 {
 	transaction_t *transaction;
 	struct journal_head *jh;
 	int may_free = 1;
-	int ret;
 
 	BUFFER_TRACE(bh, "entry");
 
+retry:
 	/*
 	 * It is safe to proceed here without the j_list_lock because the
 	 * buffers cannot be stolen by try_to_free_buffers as long as we are
@@ -1879,10 +1880,18 @@ static int journal_unmap_buffer(journal_
 	 * clear the buffer dirty bit at latest at the moment when the
 	 * transaction marking the buffer as freed in the filesystem
 	 * structures is committed because from that moment on the
-	 * buffer can be reallocated and used by a different page.
+	 * block can be reallocated and used by a different page.
 	 * Since the block hasn't been freed yet but the inode has
 	 * already been added to orphan list, it is safe for us to add
 	 * the buffer to BJ_Forget list of the newest transaction.
+	 *
+	 * Also we have to clear buffer_mapped flag of a truncated buffer
+	 * because the buffer_head may be attached to the page straddling
+	 * i_size (can happen only when blocksize < pagesize) and thus the
+	 * buffer_head can be reused when the file is extended again. So we end
+	 * up keeping around invalidated buffers attached to transactions'
+	 * BJ_Forget list just to stop checkpointing code from cleaning up
+	 * the transaction this buffer was modified in.
 	 */
 	transaction = jh->b_transaction;
 	if (transaction == NULL) {
@@ -1909,13 +1918,9 @@ static int journal_unmap_buffer(journal_
 			 * committed, the buffer won't be needed any
 			 * longer. */
 			JBUFFER_TRACE(jh, "checkpointed: add to BJ_Forget");
-			ret = __dispose_buffer(jh,
+			may_free = __dispose_buffer(jh,
 					journal->j_running_transaction);
-			journal_put_journal_head(jh);
-			spin_unlock(&journal->j_list_lock);
-			jbd_unlock_bh_state(bh);
-			spin_unlock(&journal->j_state_lock);
-			return ret;
+			goto zap_buffer;
 		} else {
 			/* There is no currently-running transaction. So the
 			 * orphan record which we wrote for this file must have
@@ -1923,13 +1928,9 @@ static int journal_unmap_buffer(journal_
 			 * the committing transaction, if it exists. */
 			if (journal->j_committing_transaction) {
 				JBUFFER_TRACE(jh, "give to committing trans");
-				ret = __dispose_buffer(jh,
+				may_free = __dispose_buffer(jh,
 					journal->j_committing_transaction);
-				journal_put_journal_head(jh);
-				spin_unlock(&journal->j_list_lock);
-				jbd_unlock_bh_state(bh);
-				spin_unlock(&journal->j_state_lock);
-				return ret;
+				goto zap_buffer;
 			} else {
 				/* The orphan record's transaction has
 				 * committed.  We can cleanse this buffer */
@@ -1950,10 +1951,24 @@ static int journal_unmap_buffer(journal_
 		}
 		/*
 		 * The buffer is committing, we simply cannot touch
-		 * it. So we just set j_next_transaction to the
-		 * running transaction (if there is one) and mark
-		 * buffer as freed so that commit code knows it should
-		 * clear dirty bits when it is done with the buffer.
+		 * it. If the page is straddling i_size we have to wait
+		 * for commit and try again.
+		 */
+		if (partial_page) {
+			tid_t tid = journal->j_committing_transaction->t_tid;
+
+			journal_put_journal_head(jh);
+			spin_unlock(&journal->j_list_lock);
+			jbd_unlock_bh_state(bh);
+			spin_unlock(&journal->j_state_lock);
+			log_wait_commit(journal, tid);
+			goto retry;
+		}
+		/*
+		 * OK, buffer won't be reachable after truncate. We just set
+		 * j_next_transaction to the running transaction (if there is
+		 * one) and mark buffer as freed so that commit code knows it
+		 * should clear dirty bits when it is done with the buffer.
 		 */
 		set_buffer_freed(bh);
 		if (journal->j_running_transaction && buffer_jbddirty(bh))
@@ -1976,6 +1991,14 @@ static int journal_unmap_buffer(journal_
 	}
 
 zap_buffer:
+	/*
+	 * This is tricky. Although the buffer is truncated, it may be reused
+	 * if blocksize < pagesize and it is attached to the page straddling
+	 * EOF. Since the buffer might have been added to BJ_Forget list of the
+	 * running transaction, journal_get_write_access() won't clear
+	 * b_modified and credit accounting gets confused. So clear b_modified
+	 * here. */
+	jh->b_modified = 0;
 	journal_put_journal_head(jh);
 zap_buffer_no_jh:
 	spin_unlock(&journal->j_list_lock);
@@ -2024,7 +2047,8 @@ void journal_invalidatepage(journal_t *j
 		if (offset <= curr_off) {
 			/* This block is wholly outside the truncation point */
 			lock_buffer(bh);
-			may_free &= journal_unmap_buffer(journal, bh);
+			may_free &= journal_unmap_buffer(journal, bh,
+							 offset > 0);
 			unlock_buffer(bh);
 		}
 		curr_off = next_off;

[ 64/76] mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian Norris <computersforpeace@gmail.com>

commit bf7a01bf7987b63b121d572b240c132ec44129c4 upstream.

The NAND_CHIPOPTIONS_MSK has limited utility and is causing real bugs. It
silently masks off at least one flag that might be set by the driver
(NAND_NO_SUBPAGE_WRITE). This breaks the GPMI NAND driver and possibly
others.

Really, as long as driver writers exercise a small amount of care with
NAND_* options, this mask is not necessary at all; it was only here to
prevent certain options from accidentally being set by the driver. But the
original thought turns out to be a bad idea occasionally. Thus, kill it.

Note, this patch fixes some major gpmi-nand breakage.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Tested-by: Huang Shijie <shijie8@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


index a11253a..c429abd 100644
---
 drivers/mtd/nand/nand_base.c |    8 +++-----
 include/linux/mtd/nand.h     |    3 ---
 2 files changed, 3 insertions(+), 8 deletions(-)

--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2914,8 +2914,7 @@ static int nand_flash_detect_onfi(struct
 	if (le16_to_cpu(p->features) & 1)
 		*busw = NAND_BUSWIDTH_16;
 
-	chip->options &= ~NAND_CHIPOPTIONS_MSK;
-	chip->options |= NAND_NO_READRDY & NAND_CHIPOPTIONS_MSK;
+	chip->options |= NAND_NO_READRDY;
 
 	pr_info("ONFI flash detected\n");
 	return 1;
@@ -3080,9 +3079,8 @@ static struct nand_flash_dev *nand_get_f
 			mtd->erasesize <<= ((id_data[3] & 0x03) << 1);
 		}
 	}
-	/* Get chip options, preserve non chip based options */
-	chip->options &= ~NAND_CHIPOPTIONS_MSK;
-	chip->options |= type->options & NAND_CHIPOPTIONS_MSK;
+	/* Get chip options */
+	chip->options |= type->options;
 
 	/*
 	 * Check if chip is not a Samsung device. Do not clear the
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -212,9 +212,6 @@ typedef enum {
 #define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \
 					&& (chip->page_shift > 9))
 
-/* Mask to zero out the chip options, which come from the id table */
-#define NAND_CHIPOPTIONS_MSK	0x0000ffff
-
 /* Non chip related options */
 /* This option skips the bbt scan during initialization. */
 #define NAND_SKIP_BBTSCAN	0x00010000

[ 65/76] e1000e: Change wthresh to 1 to avoid possible Tx stalls

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>

commit 8edc0e624db3756783233e464879eb2e3b904c13 upstream.

This patch originated from Hiroaki SHIMODA but has been modified
by Intel with some minor cleanups and additional commit log text.

Denys Fedoryshchenko and others reported Tx stalls on e1000e with
BQL enabled.  Issue was root caused to hardware delays. They were
introduced because some of the e1000e hardware with transmit
writeback bursting enabled, waits until the driver does an
explict flush OR there are WTHRESH descriptors to write back.

Sometimes the delays in question were on the order of seconds,
causing visible lag for ssh sessions and unacceptable tx
completion latency, especially for BQL enabled kernels.

To avoid possible Tx stalls, change WTHRESH back to 1.

The current plan is to investigate a method for re-enabling
WTHRESH while not harming BQL, but those patches will be later
for net-next if they work.

please enqueue for stable since v3.3 as this bug was introduced in
commit 3f0cfa3bc11e7f00c9994e0f469cbc0e7da7b00c
Author: Tom Herbert <therbert@google.com>
Date:   Mon Nov 28 16:33:16 2011 +0000

    e1000e: Support for byte queue limits

    Changes to e1000e to use byte queue limits.

Reported-by: Denys Fedoryshchenko <denys@visp.net.lb>
Tested-by: Denys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
CC: eric.dumazet@gmail.com
CC: therbert@google.com
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/intel/e1000e/e1000.h  |    6 +++---
 drivers/net/ethernet/intel/e1000e/netdev.c |    2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -175,13 +175,13 @@ struct e1000_info;
 /*
  * in the case of WTHRESH, it appears at least the 82571/2 hardware
  * writes back 4 descriptors when WTHRESH=5, and 3 descriptors when
- * WTHRESH=4, and since we want 64 bytes at a time written back, set
- * it to 5
+ * WTHRESH=4, so a setting of 5 gives the most efficient bus
+ * utilization but to avoid possible Tx stalls, set it to 1
  */
 #define E1000_TXDCTL_DMA_BURST_ENABLE                          \
 	(E1000_TXDCTL_GRAN | /* set descriptor granularity */  \
 	 E1000_TXDCTL_COUNT_DESC |                             \
-	 (5 << 16) | /* wthresh must be +1 more than desired */\
+	 (1 << 16) | /* wthresh must be +1 more than desired */\
 	 (1 << 8)  | /* hthresh */                             \
 	 0x1f)       /* pthresh */
 
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -2831,7 +2831,7 @@ static void e1000_configure_tx(struct e1
 		 * set up some performance related parameters to encourage the
 		 * hardware to use the bus more efficiently in bursts, depends
 		 * on the tx_int_delay to be enabled,
-		 * wthresh = 5 ==> burst write a cacheline (64 bytes) at a time
+		 * wthresh = 1 ==> burst write is disabled to avoid Tx stalls
 		 * hthresh = 1 ==> prefetch when one or more available
 		 * pthresh = 0x1f ==> prefetch if internal cache 31 or less
 		 * BEWARE: this seems to work but should be considered first if

[ 66/76] tpm: Propagate error from tpm_transmit to fix a timeout hang

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Huewe <peter.huewe@infineon.com>

commit abce9ac292e13da367bbd22c1f7669f988d931ac upstream.

tpm_write calls tpm_transmit without checking the return value and
assigns the return value unconditionally to chip->pending_data, even if
it's an error value.
This causes three bugs.

So if we write to /dev/tpm0 with a tpm_param_size bigger than
TPM_BUFSIZE=0x1000 (e.g. 0x100a)
and a bufsize also bigger than TPM_BUFSIZE (e.g. 0x100a)
tpm_transmit returns -E2BIG which is assigned to chip->pending_data as
-7, but tpm_write returns that TPM_BUFSIZE bytes have been successfully
been written to the TPM, altough this is not true (bug #1).

As we did write more than than TPM_BUFSIZE bytes but tpm_write reports
that only TPM_BUFSIZE bytes have been written the vfs tries to write
the remaining bytes (in this case 10 bytes) to the tpm device driver via
tpm_write which then blocks at

 /* cannot perform a write until the read has cleared
 either via tpm_read or a user_read_timer timeout */
 while (atomic_read(&chip->data_pending) != 0)
	 msleep(TPM_TIMEOUT);

for 60 seconds, since data_pending is -7 and nobody is able to
read it (since tpm_read luckily checks if data_pending is greater than
0) (#bug 2).

After that the remaining bytes are written to the TPM which are
interpreted by the tpm as a normal command. (bug #3)
So if the last bytes of the command stream happen to be a e.g.
tpm_force_clear this gets accidentally sent to the TPM.

This patch fixes all three bugs, by propagating the error code of
tpm_write and returning -E2BIG if the input buffer is too big,
since the response from the tpm for a truncated value is bogus anyway.
Moreover it returns -EBUSY to userspace if there is a response ready to be
read.

Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/tpm.c |   21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -1186,17 +1186,20 @@ ssize_t tpm_write(struct file *file, con
 		  size_t size, loff_t *off)
 {
 	struct tpm_chip *chip = file->private_data;
-	size_t in_size = size, out_size;
+	size_t in_size = size;
+	ssize_t out_size;
 
 	/* cannot perform a write until the read has cleared
-	   either via tpm_read or a user_read_timer timeout */
-	while (atomic_read(&chip->data_pending) != 0)
-		msleep(TPM_TIMEOUT);
-
-	mutex_lock(&chip->buffer_mutex);
+	   either via tpm_read or a user_read_timer timeout.
+	   This also prevents splitted buffered writes from blocking here.
+	*/
+	if (atomic_read(&chip->data_pending) != 0)
+		return -EBUSY;
 
 	if (in_size > TPM_BUFSIZE)
-		in_size = TPM_BUFSIZE;
+		return -E2BIG;
+
+	mutex_lock(&chip->buffer_mutex);
 
 	if (copy_from_user
 	    (chip->data_buffer, (void __user *) buf, in_size)) {
@@ -1206,6 +1209,10 @@ ssize_t tpm_write(struct file *file, con
 
 	/* atomic tpm command send and result receive */
 	out_size = tpm_transmit(chip, chip->data_buffer, TPM_BUFSIZE);
+	if (out_size < 0) {
+		mutex_unlock(&chip->buffer_mutex);
+		return out_size;
+	}
 
 	atomic_set(&chip->data_pending, out_size);
 	mutex_unlock(&chip->buffer_mutex);

[ 67/76] usb: gadget: at91_udc: fix dt support

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabio Porcedda <fabio.porcedda@gmail.com>

commit 9c6d196d5aa35e07482f23c3e37755e7a82140e0 upstream.

Don't fail the initialization check for the platform_data
if there is avaiable an associated device tree node.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/at91_udc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1699,7 +1699,7 @@ static int __devinit at91udc_probe(struc
 	int		retval;
 	struct resource	*res;
 
-	if (!dev->platform_data) {
+	if (!dev->platform_data && !pdev->dev.of_node) {
 		/* small (so we copy it) but critical! */
 		DBG("missing platform_data\n");
 		return -ENODEV;

[ 68/76] ALSA: hda - Fix registration race of VGA switcheroo

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 128960a9ad67e2d119738f5211956e0304517551 upstream.

Delay the registration of VGA switcheroo client to the end of the
probing.  Otherwise a too quick switching may result in Oops during
probing.

Also add the check of the return value from snd_hda_lock_devices().

Reported-and-tested-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_intel.c |   31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -487,6 +487,7 @@ struct azx {
 
 	/* VGA-switcheroo setup */
 	unsigned int use_vga_switcheroo:1;
+	unsigned int vga_switcheroo_registered:1;
 	unsigned int init_failed:1; /* delayed init failed */
 	unsigned int disabled:1; /* disabled by VGA-switcher */
 
@@ -2556,7 +2557,9 @@ static void azx_vs_set_state(struct pci_
 		if (disabled) {
 			azx_suspend(&pci->dev);
 			chip->disabled = true;
-			snd_hda_lock_devices(chip->bus);
+			if (snd_hda_lock_devices(chip->bus))
+				snd_printk(KERN_WARNING SFX
+					   "Cannot lock devices!\n");
 		} else {
 			snd_hda_unlock_devices(chip->bus);
 			chip->disabled = false;
@@ -2599,14 +2602,20 @@ static const struct vga_switcheroo_clien
 
 static int __devinit register_vga_switcheroo(struct azx *chip)
 {
+	int err;
+
 	if (!chip->use_vga_switcheroo)
 		return 0;
 	/* FIXME: currently only handling DIS controller
 	 * is there any machine with two switchable HDMI audio controllers?
 	 */
-	return vga_switcheroo_register_audio_client(chip->pci, &azx_vs_ops,
+	err = vga_switcheroo_register_audio_client(chip->pci, &azx_vs_ops,
 						    VGA_SWITCHEROO_DIS,
 						    chip->bus != NULL);
+	if (err < 0)
+		return err;
+	chip->vga_switcheroo_registered = 1;
+	return 0;
 }
 #else
 #define init_vga_switcheroo(chip)		/* NOP */
@@ -2626,7 +2635,8 @@ static int azx_free(struct azx *chip)
 	if (use_vga_switcheroo(chip)) {
 		if (chip->disabled && chip->bus)
 			snd_hda_unlock_devices(chip->bus);
-		vga_switcheroo_unregister_client(chip->pci);
+		if (chip->vga_switcheroo_registered)
+			vga_switcheroo_unregister_client(chip->pci);
 	}
 
 	if (chip->initialized) {
@@ -2974,14 +2984,6 @@ static int __devinit azx_create(struct s
 	}
 
  ok:
-	err = register_vga_switcheroo(chip);
-	if (err < 0) {
-		snd_printk(KERN_ERR SFX
-			   "Error registering VGA-switcheroo client\n");
-		azx_free(chip);
-		return err;
-	}
-
 	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
 	if (err < 0) {
 		snd_printk(KERN_ERR SFX "Error creating device [card]!\n");
@@ -3208,6 +3210,13 @@ static int __devinit azx_probe(struct pc
 
 	pci_set_drvdata(pci, card);
 
+	err = register_vga_switcheroo(chip);
+	if (err < 0) {
+		snd_printk(KERN_ERR SFX
+			   "Error registering VGA-switcheroo client\n");
+		goto out_free;
+	}
+
 	dev++;
 	return 0;
 

[ 69/76] ALSA: hda - Stop LPIB delay counting on broken hardware

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 1f04661fde9deda4a2cd5845258715a22d8af197 upstream.

If LPIB reports a pretty bad value, we can't trust such hardware for
calculating the PCM delay.  Automatically turn off the delay counting
when such a problem is encountered.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=48911

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_intel.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2136,9 +2136,12 @@ static unsigned int azx_get_position(str
 		if (delay < 0)
 			delay += azx_dev->bufsize;
 		if (delay >= azx_dev->period_bytes) {
-			snd_printdd("delay %d > period_bytes %d\n",
-				delay, azx_dev->period_bytes);
-			delay = 0; /* something is wrong */
+			snd_printk(KERN_WARNING SFX
+				   "Unstable LPIB (%d >= %d); "
+				   "disabling LPIB delay counting\n",
+				   delay, azx_dev->period_bytes);
+			delay = 0;
+			chip->driver_caps &= ~AZX_DCAPS_COUNT_LPIB_DELAY;
 		}
 		azx_dev->substream->runtime->delay =
 			bytes_to_frames(azx_dev->substream->runtime, delay);

[ 70/76] ALSA: hda - Always check array bounds in alc_get_line_out_pfx

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Henningsson <david.henningsson@canonical.com>

commit 71aa5ebe36a4e936eff281b375a4707b6a8320f2 upstream.

Even when CONFIG_SND_DEBUG is not enabled, we don't want to
return an arbitrary memory location when the channel count is
larger than we expected.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2629,8 +2629,10 @@ static const char *alc_get_line_out_pfx(
 			return "PCM";
 		break;
 	}
-	if (snd_BUG_ON(ch >= ARRAY_SIZE(channel_name)))
+	if (ch >= ARRAY_SIZE(channel_name)) {
+		snd_BUG();
 		return "PCM";
+	}
 
 	return channel_name[ch];
 }

[ 71/76] ASoC: fsi: dont reschedule DMA from an atomic context

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

commit 57451e437796548d658d03c2c4aab659eafcd799 upstream.

shdma doesn't support transfer re-scheduling or triggering from callbacks
or from atomic context. The fsi driver issues DMA transfers from a tasklet
context, which is a bug. To fix it convert tasklet to a work.

Reported-by: Do Q.Thang <dq-thang@jinso.co.jp>
Tested-by: Do Q.Thang <dq-thang@jinso.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/sh/fsi.c |   15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -20,6 +20,7 @@
 #include <linux/sh_dma.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/workqueue.h>
 #include <sound/soc.h>
 #include <sound/sh_fsi.h>
 
@@ -223,7 +224,7 @@ struct fsi_stream {
 	 */
 	struct dma_chan		*chan;
 	struct sh_dmae_slave	slave; /* see fsi_handler_init() */
-	struct tasklet_struct	tasklet;
+	struct work_struct	work;
 	dma_addr_t		dma;
 };
 
@@ -1085,9 +1086,9 @@ static void fsi_dma_complete(void *data)
 	snd_pcm_period_elapsed(io->substream);
 }
 
-static void fsi_dma_do_tasklet(unsigned long data)
+static void fsi_dma_do_work(struct work_struct *work)
 {
-	struct fsi_stream *io = (struct fsi_stream *)data;
+	struct fsi_stream *io = container_of(work, struct fsi_stream, work);
 	struct fsi_priv *fsi = fsi_stream_to_priv(io);
 	struct snd_soc_dai *dai;
 	struct dma_async_tx_descriptor *desc;
@@ -1129,7 +1130,7 @@ static void fsi_dma_do_tasklet(unsigned
 	 * FIXME
 	 *
 	 * In DMAEngine case, codec and FSI cannot be started simultaneously
-	 * since FSI is using tasklet.
+	 * since FSI is using the scheduler work queue.
 	 * Therefore, in capture case, probably FSI FIFO will have got
 	 * overflow error in this point.
 	 * in that case, DMA cannot start transfer until error was cleared.
@@ -1153,7 +1154,7 @@ static bool fsi_dma_filter(struct dma_ch
 
 static int fsi_dma_transfer(struct fsi_priv *fsi, struct fsi_stream *io)
 {
-	tasklet_schedule(&io->tasklet);
+	schedule_work(&io->work);
 
 	return 0;
 }
@@ -1195,14 +1196,14 @@ static int fsi_dma_probe(struct fsi_priv
 		return fsi_stream_probe(fsi, dev);
 	}
 
-	tasklet_init(&io->tasklet, fsi_dma_do_tasklet, (unsigned long)io);
+	INIT_WORK(&io->work, fsi_dma_do_work);
 
 	return 0;
 }
 
 static int fsi_dma_remove(struct fsi_priv *fsi, struct fsi_stream *io)
 {
-	tasklet_kill(&io->tasklet);
+	cancel_work_sync(&io->work);
 
 	fsi_stream_stop(fsi, io);
 

[ 72/76] ASoC: wm2200: Use rev A register patches on rev B

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit 5ae9eb4cbdfd640269dbd66aa3c92ea8e11cc838 upstream.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/wm2200.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/soc/codecs/wm2200.c
+++ b/sound/soc/codecs/wm2200.c
@@ -2091,6 +2091,7 @@ static __devinit int wm2200_i2c_probe(st
 
 	switch (wm2200->rev) {
 	case 0:
+	case 1:
 		ret = regmap_register_patch(wm2200->regmap, wm2200_reva_patch,
 					    ARRAY_SIZE(wm2200_reva_patch));
 		if (ret != 0) {

[ 73/76] ASoC: wm2200: Fix non-inverted OUT2 mute control

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit a1b98e12b7f8fad2f0aa3c08a3302bcac7ae1ec7 upstream.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/wm2200.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/soc/codecs/wm2200.c
+++ b/sound/soc/codecs/wm2200.c
@@ -1028,7 +1028,7 @@ SOC_DOUBLE_R_TLV("OUT2 Digital Volume",
 		 WM2200_DAC_DIGITAL_VOLUME_2R, WM2200_OUT2L_VOL_SHIFT, 0x9f, 0,
 		 digital_tlv),
 SOC_DOUBLE("OUT2 Switch", WM2200_PDM_1, WM2200_SPK1L_MUTE_SHIFT,
-	   WM2200_SPK1R_MUTE_SHIFT, 1, 0),
+	   WM2200_SPK1R_MUTE_SHIFT, 1, 1),
 };
 
 WM2200_MIXER_ENUMS(OUT1L, WM2200_OUT1LMIX_INPUT_1_SOURCE);

[ 74/76] ASoC: omap-abe-twl6040: Fix typo of Vibrator

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

commit 034940a6b3afbe79022ab6922dd9d2982b78e6d5 upstream.

It is not Vinrator but Vibrator.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/omap/omap-abe-twl6040.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/soc/omap/omap-abe-twl6040.c
+++ b/sound/soc/omap/omap-abe-twl6040.c
@@ -190,7 +190,7 @@ static int omap_abe_twl6040_init(struct
 	twl6040_disconnect_pin(dapm, pdata->has_hf, "Ext Spk");
 	twl6040_disconnect_pin(dapm, pdata->has_ep, "Earphone Spk");
 	twl6040_disconnect_pin(dapm, pdata->has_aux, "Line Out");
-	twl6040_disconnect_pin(dapm, pdata->has_vibra, "Vinrator");
+	twl6040_disconnect_pin(dapm, pdata->has_vibra, "Vibrator");
 	twl6040_disconnect_pin(dapm, pdata->has_hsmic, "Headset Mic");
 	twl6040_disconnect_pin(dapm, pdata->has_mainmic, "Main Handset Mic");
 	twl6040_disconnect_pin(dapm, pdata->has_submic, "Sub Handset Mic");

[ 75/76] ALSA: ac97 - Fix missing NULL check in snd_ac97_cvol_new()

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 733a48e5ae5bf28b046fad984d458c747cbb8c21 upstream.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44721

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/ac97/ac97_codec.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -1271,6 +1271,8 @@ static int snd_ac97_cvol_new(struct snd_
 		tmp.index = ac97->num;
 		kctl = snd_ctl_new1(&tmp, ac97);
 	}
+	if (!kctl)
+		return -ENOMEM;
 	if (reg >= AC97_PHONE && reg <= AC97_PCM)
 		set_tlv_db_scale(kctl, db_scale_5bit_12db_max);
 	else

[ 76/76] ALSA: emu10k1: add chip details for E-mu 1010 PCIe card

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maxim Kachur <mcdebugger@duganet.ru>

commit 10f571d09106c3eb85951896522c9650596eff2e upstream.

Add chip details for E-mu 1010 PCIe card. It has the same
chip as found in E-mu 1010b but it uses different PCI id.

Signed-off-by: Maxim Kachur <mcdebugger@duganet.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/emu10k1/emu10k1_main.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -1416,6 +1416,15 @@ static struct snd_emu_chip_details emu_c
 	 .ca0108_chip = 1,
 	 .spk71 = 1,
 	 .emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 new revision */
+	/* Tested by Maxim Kachur <mcdebugger@duganet.ru> 17th Oct 2012. */
+	/* This is MAEM8986, 0202 is MAEM8980 */
+	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40071102,
+	 .driver = "Audigy2", .name = "E-mu 1010 PCIe [MAEM8986]",
+	 .id = "EMU1010",
+	 .emu10k2_chip = 1,
+	 .ca0108_chip = 1,
+	 .spk71 = 1,
+	 .emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 PCIe */
 	/* Tested by James@superbug.co.uk 8th July 2005. */
 	/* This is MAEM8810, 0202 is MAEM8820 */
 	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40011102,

Re: [ 60/76] drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB

[Heinz Diehl]

On 19.10.2012, Greg Kroah-Hartman wrote: 

> 3.6-stable review patch.  If anyone has any objections, please let me know.

While 3.6.2 is fine. 3.6.3-rc1 crashes my machine (Asus U45-JC) at
boot. A screenshot of the output is here:

http://www.fritha.org/crash.jpg

Reverting this one fixes it:

> Ben Skeggs <bskeggs@redhat.com>
>     drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB

Re: [ 60/76] drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB

[Greg Kroah-Hartman]

On Fri, Oct 19, 2012 at 06:01:03PM +0200, Heinz Diehl wrote:
> On 19.10.2012, Greg Kroah-Hartman wrote: 
> 
> > 3.6-stable review patch.  If anyone has any objections, please let me know.
> 
> While 3.6.2 is fine. 3.6.3-rc1 crashes my machine (Asus U45-JC) at
> boot. A screenshot of the output is here:
> 
> http://www.fritha.org/crash.jpg
> 
> Reverting this one fixes it:
> 
> > Ben Skeggs <bskeggs@redhat.com>
> >     drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB

Ick.

Does Linus's 3.7 git tree also crash for you this way?

Ben, any thoughts?  Should I just drop this for now from the 3.6-stable
tree until it gets worked out?

greg k-h

Re: [ 60/76] drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB

[Heinz Diehl]

On 19.10.2012, Greg Kroah-Hartman wrote: 

> Does Linus's 3.7 git tree also crash for you this way?

Yes, it crashes in the same way with latest linus git 3.7.
Here's the screenshot:

http://www.fritha.org/crash-linus-git.jpg

Re: [ 09/76] lockd: use rpc clients cl_nodename for id encoding

[Ben Hutchings]

On Thu, Oct 18, 2012 at 07:46:33PM -0700, Greg Kroah-Hartman wrote:
> 3.6-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Stanislav Kinsbursky <skinsbursky@parallels.com>
> 
> commit 303a7ce92064c285a04c870f2dc0192fdb2968cb upstream.
> 
> Taking hostname from uts namespace if not safe, because this cuold be
> performind during umount operation on child reaper death. And in this case
> current->nsproxy is NULL already.
> 
> Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> ---
>  fs/lockd/mon.c |    4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> --- a/fs/lockd/mon.c
> +++ b/fs/lockd/mon.c
> @@ -42,6 +42,7 @@ struct nsm_args {
>  	u32			proc;
>  
>  	char			*mon_name;
> +	char			*nodename;
>  };
>  
>  struct nsm_res {
> @@ -141,6 +142,7 @@ static int nsm_mon_unmon(struct nsm_hand
>  		.vers		= 3,
>  		.proc		= NLMPROC_NSM_NOTIFY,
>  		.mon_name	= nsm->sm_mon_name,
> +		.nodename	= utsname()->nodename,

Can we be sure that this string pointer will remain valid at the point
where current->nsproxy has become NULL?  Or should nsm_args::nodename
actually be a copy of the string?

Ben.

>  	};
>  	struct rpc_message msg = {
>  		.rpc_argp	= &args,
> @@ -477,7 +479,7 @@ static void encode_my_id(struct xdr_stre
>  {
>  	__be32 *p;
>  
> -	encode_nsm_string(xdr, utsname()->nodename);
> +	encode_nsm_string(xdr, argp->nodename);
>  	p = xdr_reserve_space(xdr, 4 + 4 + 4);
>  	*p++ = cpu_to_be32(argp->prog);
>  	*p++ = cpu_to_be32(argp->vers);

-- 
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
                                                              - Albert Camus

Re: [ 09/76] lockd: use rpc clients cl_nodename for id encoding

[Ben Hutchings]

On Fri, Oct 19, 2012 at 11:10:30PM +0100, Ben Hutchings wrote:
> On Thu, Oct 18, 2012 at 07:46:33PM -0700, Greg Kroah-Hartman wrote:
> > 3.6-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Stanislav Kinsbursky <skinsbursky@parallels.com>
> > 
> > commit 303a7ce92064c285a04c870f2dc0192fdb2968cb upstream.
> > 
> > Taking hostname from uts namespace if not safe, because this cuold be
> > performind during umount operation on child reaper death. And in this case
> > current->nsproxy is NULL already.
[...]
> >  struct nsm_res {
> > @@ -141,6 +142,7 @@ static int nsm_mon_unmon(struct nsm_hand
> >  		.vers		= 3,
> >  		.proc		= NLMPROC_NSM_NOTIFY,
> >  		.mon_name	= nsm->sm_mon_name,
> > +		.nodename	= utsname()->nodename,
> 
> Can we be sure that this string pointer will remain valid at the point
> where current->nsproxy has become NULL?  Or should nsm_args::nodename
> actually be a copy of the string?
[...]

Never mind, the following patch seems to deal with that.

Ben.

-- 
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
                                                              - Albert Camus

Re: [ 60/76] drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB

[Greg Kroah-Hartman]

On Fri, Oct 19, 2012 at 09:11:15PM +0200, Heinz Diehl wrote:
> On 19.10.2012, Greg Kroah-Hartman wrote: 
> 
> > Does Linus's 3.7 git tree also crash for you this way?
> 
> Yes, it crashes in the same way with latest linus git 3.7.
> Here's the screenshot:
> 
> http://www.fritha.org/crash-linus-git.jpg

Ok, I've dropped it from the 3.6-stable release.  Ben, when you all have
a fix for this in Linus's tree, feel free to send me the two git commit
ids and I'll queue them up.

thanks,

greg k-h