* [PATCH 0/6] ARM: S3C24XX: Move s3c2440 and s3c2442 into new irq structure
@ 2013-02-05 23:10 ` Heiko Stübner
0 siblings, 0 replies; 14+ messages in thread
From: Heiko Stübner @ 2013-02-05 23:10 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
Follows the formular laid out in the previous series, i.e. moving of the code,
changing of the init and creation of the mapping structure.
As I lack hardware for these arches, compile tested only. But as it is similar
to the architectures of the previous run, hopefully I didn't break anything.
Applies to current for-next of the linux-samsung tree, which includes the move
of irq.c to mach-s3c24xx.
Heiko Stuebner (6):
ARM: S3C24XX: move s3c244x irq init to common irq code
ARM: S3C24XX: create dedicated irq init functions for s3c2440 and s3c2442
ARM: S3C24XX: move s3c2440 irqs to common irq code
ARM: S3C24XX: integrate s3c2440 irqs into common init
ARM: S3C24XX: transform s3c2442 irqs into new structure
ARM: S3C24XX: transform s3c2440 irqs into new structure
arch/arm/mach-s3c24xx/Makefile | 4 +-
arch/arm/mach-s3c24xx/common.h | 4 +
arch/arm/mach-s3c24xx/irq-s3c2440.c | 128 ---------------------------
arch/arm/mach-s3c24xx/irq-s3c244x.c | 142 ------------------------------
arch/arm/mach-s3c24xx/irq.c | 148 ++++++++++++++++++++++++++++++++
arch/arm/mach-s3c24xx/mach-anubis.c | 2 +-
arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +-
arch/arm/mach-s3c24xx/mach-nexcoder.c | 2 +-
arch/arm/mach-s3c24xx/mach-osiris.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx3715.c | 7 +--
arch/arm/mach-s3c24xx/mach-smdk2440.c | 2 +-
14 files changed, 163 insertions(+), 286 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2440.c
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c244x.c
--
1.7.2.3
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 0/6] ARM: S3C24XX: Move s3c2440 and s3c2442 into new irq structure
@ 2013-02-05 23:10 ` Heiko Stübner
0 siblings, 0 replies; 14+ messages in thread
From: Heiko Stübner @ 2013-02-05 23:10 UTC (permalink / raw)
To: linux-arm-kernel
Follows the formular laid out in the previous series, i.e. moving of the code,
changing of the init and creation of the mapping structure.
As I lack hardware for these arches, compile tested only. But as it is similar
to the architectures of the previous run, hopefully I didn't break anything.
Applies to current for-next of the linux-samsung tree, which includes the move
of irq.c to mach-s3c24xx.
Heiko Stuebner (6):
ARM: S3C24XX: move s3c244x irq init to common irq code
ARM: S3C24XX: create dedicated irq init functions for s3c2440 and s3c2442
ARM: S3C24XX: move s3c2440 irqs to common irq code
ARM: S3C24XX: integrate s3c2440 irqs into common init
ARM: S3C24XX: transform s3c2442 irqs into new structure
ARM: S3C24XX: transform s3c2440 irqs into new structure
arch/arm/mach-s3c24xx/Makefile | 4 +-
arch/arm/mach-s3c24xx/common.h | 4 +
arch/arm/mach-s3c24xx/irq-s3c2440.c | 128 ---------------------------
arch/arm/mach-s3c24xx/irq-s3c244x.c | 142 ------------------------------
arch/arm/mach-s3c24xx/irq.c | 148 ++++++++++++++++++++++++++++++++
arch/arm/mach-s3c24xx/mach-anubis.c | 2 +-
arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +-
arch/arm/mach-s3c24xx/mach-nexcoder.c | 2 +-
arch/arm/mach-s3c24xx/mach-osiris.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx3715.c | 7 +--
arch/arm/mach-s3c24xx/mach-smdk2440.c | 2 +-
14 files changed, 163 insertions(+), 286 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2440.c
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c244x.c
--
1.7.2.3
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/6] ARM: S3C24XX: move s3c244x irq init to common irq code
2013-02-05 23:10 ` Heiko Stübner
@ 2013-02-05 23:11 ` Heiko Stübner
-1 siblings, 0 replies; 14+ messages in thread
From: Heiko Stübner @ 2013-02-05 23:11 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
Base for further modifications.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/Makefile | 2 +-
arch/arm/mach-s3c24xx/irq-s3c244x.c | 142 -----------------------------------
arch/arm/mach-s3c24xx/irq.c | 105 ++++++++++++++++++++++++++
3 files changed, 106 insertions(+), 143 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c244x.c
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index af53d27..051b8f9 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -33,7 +33,7 @@ obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o
obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
diff --git a/arch/arm/mach-s3c24xx/irq-s3c244x.c b/arch/arm/mach-s3c24xx/irq-s3c244x.c
deleted file mode 100644
index 5fe8e58..0000000
--- a/arch/arm/mach-s3c24xx/irq-s3c244x.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 11;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_CAM_C);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_CAM_P);
- }
- }
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static void
-s3c_irq_cam_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static struct irq_chip s3c_irq_cam = {
- .irq_mask = s3c_irq_cam_mask,
- .irq_unmask = s3c_irq_cam_unmask,
- .irq_ack = s3c_irq_cam_ack,
-};
-
-static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int irqno;
-
- irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
- handle_level_irq);
- set_irq_flags(IRQ_NFCON, IRQF_VALID);
-
- /* add chained handler for camera */
-
- irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
-
- for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_cam,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
-static struct subsys_interface s3c2442_irq_interface = {
- .name = "s3c2442_irq",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-
-static int s3c2442_irq_init(void)
-{
- return subsys_interface_register(&s3c2442_irq_interface);
-}
-
-arch_initcall(s3c2442_irq_init);
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index cb9f5e0..95f971f 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -731,6 +731,111 @@ void __init s3c2416_init_irq(void)
#endif
+#ifdef CONFIG_CPU_S3C244X
+/* camera irq */
+
+static void s3c_irq_demux_cam(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= 11;
+ subsrc &= 3;
+
+ if (subsrc != 0) {
+ if (subsrc & 1) {
+ generic_handle_irq(IRQ_S3C2440_CAM_C);
+ }
+ if (subsrc & 2) {
+ generic_handle_irq(IRQ_S3C2440_CAM_P);
+ }
+ }
+}
+
+#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
+
+static void
+s3c_irq_cam_mask(struct irq_data *data)
+{
+ s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
+}
+
+static void
+s3c_irq_cam_unmask(struct irq_data *data)
+{
+ s3c_irqsub_unmask(data->irq, INTMSK_CAM);
+}
+
+static void
+s3c_irq_cam_ack(struct irq_data *data)
+{
+ s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
+}
+
+static struct irq_chip s3c_irq_cam = {
+ .irq_mask = s3c_irq_cam_mask,
+ .irq_unmask = s3c_irq_cam_unmask,
+ .irq_ack = s3c_irq_cam_ack,
+};
+
+static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
+{
+ unsigned int irqno;
+
+ irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
+ handle_level_irq);
+ set_irq_flags(IRQ_NFCON, IRQF_VALID);
+
+ /* add chained handler for camera */
+
+ irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+
+ for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_cam,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static struct subsys_interface s3c2440_irq_interface = {
+ .name = "s3c2440_irq",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c244x_irq_add,
+};
+
+static int s3c2440_irq_init(void)
+{
+ return subsys_interface_register(&s3c2440_irq_interface);
+}
+
+arch_initcall(s3c2440_irq_init);
+
+static struct subsys_interface s3c2442_irq_interface = {
+ .name = "s3c2442_irq",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c244x_irq_add,
+};
+
+
+static int s3c2442_irq_init(void)
+{
+ return subsys_interface_register(&s3c2442_irq_interface);
+}
+
+arch_initcall(s3c2442_irq_init);
+#endif
+
#ifdef CONFIG_CPU_S3C2443
static struct s3c_irq_data init_s3c2443base[32] = {
{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
--
1.7.2.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 1/6] ARM: S3C24XX: move s3c244x irq init to common irq code
@ 2013-02-05 23:11 ` Heiko Stübner
0 siblings, 0 replies; 14+ messages in thread
From: Heiko Stübner @ 2013-02-05 23:11 UTC (permalink / raw)
To: linux-arm-kernel
Base for further modifications.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/Makefile | 2 +-
arch/arm/mach-s3c24xx/irq-s3c244x.c | 142 -----------------------------------
arch/arm/mach-s3c24xx/irq.c | 105 ++++++++++++++++++++++++++
3 files changed, 106 insertions(+), 143 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c244x.c
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index af53d27..051b8f9 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -33,7 +33,7 @@ obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o
obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
diff --git a/arch/arm/mach-s3c24xx/irq-s3c244x.c b/arch/arm/mach-s3c24xx/irq-s3c244x.c
deleted file mode 100644
index 5fe8e58..0000000
--- a/arch/arm/mach-s3c24xx/irq-s3c244x.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 11;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_CAM_C);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_CAM_P);
- }
- }
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static void
-s3c_irq_cam_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static struct irq_chip s3c_irq_cam = {
- .irq_mask = s3c_irq_cam_mask,
- .irq_unmask = s3c_irq_cam_unmask,
- .irq_ack = s3c_irq_cam_ack,
-};
-
-static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int irqno;
-
- irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
- handle_level_irq);
- set_irq_flags(IRQ_NFCON, IRQF_VALID);
-
- /* add chained handler for camera */
-
- irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
-
- for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_cam,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
-static struct subsys_interface s3c2442_irq_interface = {
- .name = "s3c2442_irq",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-
-static int s3c2442_irq_init(void)
-{
- return subsys_interface_register(&s3c2442_irq_interface);
-}
-
-arch_initcall(s3c2442_irq_init);
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index cb9f5e0..95f971f 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -731,6 +731,111 @@ void __init s3c2416_init_irq(void)
#endif
+#ifdef CONFIG_CPU_S3C244X
+/* camera irq */
+
+static void s3c_irq_demux_cam(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= 11;
+ subsrc &= 3;
+
+ if (subsrc != 0) {
+ if (subsrc & 1) {
+ generic_handle_irq(IRQ_S3C2440_CAM_C);
+ }
+ if (subsrc & 2) {
+ generic_handle_irq(IRQ_S3C2440_CAM_P);
+ }
+ }
+}
+
+#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
+
+static void
+s3c_irq_cam_mask(struct irq_data *data)
+{
+ s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
+}
+
+static void
+s3c_irq_cam_unmask(struct irq_data *data)
+{
+ s3c_irqsub_unmask(data->irq, INTMSK_CAM);
+}
+
+static void
+s3c_irq_cam_ack(struct irq_data *data)
+{
+ s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
+}
+
+static struct irq_chip s3c_irq_cam = {
+ .irq_mask = s3c_irq_cam_mask,
+ .irq_unmask = s3c_irq_cam_unmask,
+ .irq_ack = s3c_irq_cam_ack,
+};
+
+static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
+{
+ unsigned int irqno;
+
+ irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
+ handle_level_irq);
+ set_irq_flags(IRQ_NFCON, IRQF_VALID);
+
+ /* add chained handler for camera */
+
+ irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+
+ for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_cam,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static struct subsys_interface s3c2440_irq_interface = {
+ .name = "s3c2440_irq",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c244x_irq_add,
+};
+
+static int s3c2440_irq_init(void)
+{
+ return subsys_interface_register(&s3c2440_irq_interface);
+}
+
+arch_initcall(s3c2440_irq_init);
+
+static struct subsys_interface s3c2442_irq_interface = {
+ .name = "s3c2442_irq",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c244x_irq_add,
+};
+
+
+static int s3c2442_irq_init(void)
+{
+ return subsys_interface_register(&s3c2442_irq_interface);
+}
+
+arch_initcall(s3c2442_irq_init);
+#endif
+
#ifdef CONFIG_CPU_S3C2443
static struct s3c_irq_data init_s3c2443base[32] = {
{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
--
1.7.2.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/6] ARM: S3C24XX: create dedicated irq init functions for s3c2440 and s3c2442
2013-02-05 23:10 ` Heiko Stübner
@ 2013-02-05 23:12 ` Heiko Stübner
-1 siblings, 0 replies; 14+ messages in thread
From: Heiko Stübner @ 2013-02-05 23:12 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
s3c2440 and s3c2442 need separate init functions, as the s3c2440 contains
even more differing irqs that will be moved in the following patch.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/common.h | 4 +++
arch/arm/mach-s3c24xx/irq.c | 45 ++++++++++++++++---------------
arch/arm/mach-s3c24xx/mach-anubis.c | 2 +-
arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +-
arch/arm/mach-s3c24xx/mach-nexcoder.c | 2 +-
arch/arm/mach-s3c24xx/mach-osiris.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx3715.c | 7 +----
arch/arm/mach-s3c24xx/mach-smdk2440.c | 2 +-
11 files changed, 36 insertions(+), 36 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index ed6276f..3a4df14 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -17,4 +17,8 @@ void s3c244x_restart(char mode, const char *cmd);
extern struct syscore_ops s3c24xx_irq_syscore_ops;
+extern void s3c2440_init_irq(void);
+
+extern void s3c2442_init_irq(void);
+
#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 95f971f..c544e00 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -785,10 +785,13 @@ static struct irq_chip s3c_irq_cam = {
.irq_ack = s3c_irq_cam_ack,
};
-static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
+#ifdef CONFIG_CPU_S3C2440
+void __init s3c2440_init_irq(void)
{
unsigned int irqno;
+ s3c24xx_init_irq();
+
irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
handle_level_irq);
set_irq_flags(IRQ_NFCON, IRQF_VALID);
@@ -804,36 +807,34 @@ static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
-
- return 0;
}
+#endif
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-static int s3c2440_irq_init(void)
+#ifdef CONFIG_CPU_S3C2442
+void __init s3c2442_init_irq(void)
{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
+ unsigned int irqno;
-arch_initcall(s3c2440_irq_init);
+ s3c24xx_init_irq();
-static struct subsys_interface s3c2442_irq_interface = {
- .name = "s3c2442_irq",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c244x_irq_add,
-};
+ irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
+ handle_level_irq);
+ set_irq_flags(IRQ_NFCON, IRQF_VALID);
+ /* add chained handler for camera */
-static int s3c2442_irq_init(void)
-{
- return subsys_interface_register(&s3c2442_irq_interface);
+ irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+
+ for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_cam,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
}
+#endif
-arch_initcall(s3c2442_irq_init);
#endif
#ifdef CONFIG_CPU_S3C2443
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 24f1a04..c1fb6c3 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -445,7 +445,7 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
.atag_offset = 0x100,
.map_io = anubis_map_io,
.init_machine = anubis_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 2bf6c8c..6dfeeb7 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -211,7 +211,7 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
.atag_offset = 0x100,
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 84a750d..13d8d07 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -589,7 +589,7 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
.atag_offset = 0x100,
.map_io = gta02_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2442_init_irq,
.init_machine = gta02_machine_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 29f106c..a83db46 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -688,7 +688,7 @@ MACHINE_START(MINI2440, "MINI2440")
.atag_offset = 0x100,
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index f64a146..665980a 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -154,7 +154,7 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
.atag_offset = 0x100,
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index 4c90ffd..58d6fbe 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -426,7 +426,7 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
.atag_offset = 0x100,
.map_io = osiris_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_machine = osiris_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 799af43..e4d67a3 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -813,7 +813,7 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
.atag_offset = 0x100,
.map_io = rx1950_map_io,
.reserve = rx1950_reserve,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2442_init_irq,
.init_machine = rx1950_init_machine,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index 0a3c964..3bc6231 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -190,11 +190,6 @@ static void __init rx3715_reserve(void)
memblock_reserve(0x30081000, 0x1000);
}
-static void __init rx3715_init_irq(void)
-{
- s3c24xx_init_irq();
-}
-
static void __init rx3715_init_machine(void)
{
#ifdef CONFIG_PM_H1940
@@ -212,7 +207,7 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
.atag_offset = 0x100,
.map_io = rx3715_map_io,
.reserve = rx3715_reserve,
- .init_irq = rx3715_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_machine = rx3715_init_machine,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index 05bf045..c6cdfa9 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -180,7 +180,7 @@ MACHINE_START(S3C2440, "SMDK2440")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
.init_time = samsung_timer_init,
--
1.7.2.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/6] ARM: S3C24XX: create dedicated irq init functions for s3c2440 and s3c2442
@ 2013-02-05 23:12 ` Heiko Stübner
0 siblings, 0 replies; 14+ messages in thread
From: Heiko Stübner @ 2013-02-05 23:12 UTC (permalink / raw)
To: linux-arm-kernel
s3c2440 and s3c2442 need separate init functions, as the s3c2440 contains
even more differing irqs that will be moved in the following patch.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/common.h | 4 +++
arch/arm/mach-s3c24xx/irq.c | 45 ++++++++++++++++---------------
arch/arm/mach-s3c24xx/mach-anubis.c | 2 +-
arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +-
arch/arm/mach-s3c24xx/mach-nexcoder.c | 2 +-
arch/arm/mach-s3c24xx/mach-osiris.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx3715.c | 7 +----
arch/arm/mach-s3c24xx/mach-smdk2440.c | 2 +-
11 files changed, 36 insertions(+), 36 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index ed6276f..3a4df14 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -17,4 +17,8 @@ void s3c244x_restart(char mode, const char *cmd);
extern struct syscore_ops s3c24xx_irq_syscore_ops;
+extern void s3c2440_init_irq(void);
+
+extern void s3c2442_init_irq(void);
+
#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 95f971f..c544e00 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -785,10 +785,13 @@ static struct irq_chip s3c_irq_cam = {
.irq_ack = s3c_irq_cam_ack,
};
-static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
+#ifdef CONFIG_CPU_S3C2440
+void __init s3c2440_init_irq(void)
{
unsigned int irqno;
+ s3c24xx_init_irq();
+
irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
handle_level_irq);
set_irq_flags(IRQ_NFCON, IRQF_VALID);
@@ -804,36 +807,34 @@ static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
-
- return 0;
}
+#endif
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-static int s3c2440_irq_init(void)
+#ifdef CONFIG_CPU_S3C2442
+void __init s3c2442_init_irq(void)
{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
+ unsigned int irqno;
-arch_initcall(s3c2440_irq_init);
+ s3c24xx_init_irq();
-static struct subsys_interface s3c2442_irq_interface = {
- .name = "s3c2442_irq",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c244x_irq_add,
-};
+ irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
+ handle_level_irq);
+ set_irq_flags(IRQ_NFCON, IRQF_VALID);
+ /* add chained handler for camera */
-static int s3c2442_irq_init(void)
-{
- return subsys_interface_register(&s3c2442_irq_interface);
+ irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+
+ for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_cam,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
}
+#endif
-arch_initcall(s3c2442_irq_init);
#endif
#ifdef CONFIG_CPU_S3C2443
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 24f1a04..c1fb6c3 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -445,7 +445,7 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
.atag_offset = 0x100,
.map_io = anubis_map_io,
.init_machine = anubis_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 2bf6c8c..6dfeeb7 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -211,7 +211,7 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
.atag_offset = 0x100,
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 84a750d..13d8d07 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -589,7 +589,7 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
.atag_offset = 0x100,
.map_io = gta02_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2442_init_irq,
.init_machine = gta02_machine_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 29f106c..a83db46 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -688,7 +688,7 @@ MACHINE_START(MINI2440, "MINI2440")
.atag_offset = 0x100,
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index f64a146..665980a 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -154,7 +154,7 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
.atag_offset = 0x100,
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index 4c90ffd..58d6fbe 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -426,7 +426,7 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
.atag_offset = 0x100,
.map_io = osiris_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_machine = osiris_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 799af43..e4d67a3 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -813,7 +813,7 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
.atag_offset = 0x100,
.map_io = rx1950_map_io,
.reserve = rx1950_reserve,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2442_init_irq,
.init_machine = rx1950_init_machine,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index 0a3c964..3bc6231 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -190,11 +190,6 @@ static void __init rx3715_reserve(void)
memblock_reserve(0x30081000, 0x1000);
}
-static void __init rx3715_init_irq(void)
-{
- s3c24xx_init_irq();
-}
-
static void __init rx3715_init_machine(void)
{
#ifdef CONFIG_PM_H1940
@@ -212,7 +207,7 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
.atag_offset = 0x100,
.map_io = rx3715_map_io,
.reserve = rx3715_reserve,
- .init_irq = rx3715_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_machine = rx3715_init_machine,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index 05bf045..c6cdfa9 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -180,7 +180,7 @@ MACHINE_START(S3C2440, "SMDK2440")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
.init_time = samsung_timer_init,
--
1.7.2.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 3/6] ARM: S3C24XX: move s3c2440 irqs to common irq code
2013-02-05 23:10 ` Heiko Stübner
@ 2013-02-05 23:13 ` Heiko Stübner
-1 siblings, 0 replies; 14+ messages in thread
From: Heiko Stübner @ 2013-02-05 23:13 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
Will be integrated in the following patch.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/Makefile | 2 +-
arch/arm/mach-s3c24xx/irq-s3c2440.c | 128 -----------------------------------
arch/arm/mach-s3c24xx/irq.c | 88 ++++++++++++++++++++++++
3 files changed, 89 insertions(+), 129 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2440.c
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 051b8f9..9041260 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -31,7 +31,7 @@ obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o
obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o
obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2440.c b/arch/arm/mach-s3c24xx/irq-s3c2440.c
deleted file mode 100644
index 4a18cde..0000000
--- a/arch/arm/mach-s3c24xx/irq-s3c2440.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 13;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_WDT);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_AC97);
- }
- }
-}
-
-
-#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static struct irq_chip s3c_irq_wdtac97 = {
- .irq_mask = s3c_irq_wdtac97_mask,
- .irq_unmask = s3c_irq_wdtac97_unmask,
- .irq_ack = s3c_irq_wdtac97_ack,
-};
-
-static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int irqno;
-
- printk("S3C2440: IRQ Support\n");
-
- /* add new chained handler for wdt, ac7 */
-
- irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
- for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index c544e00..592072b 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -786,6 +786,94 @@ static struct irq_chip s3c_irq_cam = {
};
#ifdef CONFIG_CPU_S3C2440
+/* WDT/AC97 */
+
+static void s3c_irq_demux_wdtac97(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= 13;
+ subsrc &= 3;
+
+ if (subsrc != 0) {
+ if (subsrc & 1) {
+ generic_handle_irq(IRQ_S3C2440_WDT);
+ }
+ if (subsrc & 2) {
+ generic_handle_irq(IRQ_S3C2440_AC97);
+ }
+ }
+}
+
+
+#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
+
+static void
+s3c_irq_wdtac97_mask(struct irq_data *data)
+{
+ s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
+}
+
+static void
+s3c_irq_wdtac97_unmask(struct irq_data *data)
+{
+ s3c_irqsub_unmask(data->irq, INTMSK_WDT);
+}
+
+static void
+s3c_irq_wdtac97_ack(struct irq_data *data)
+{
+ s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
+}
+
+static struct irq_chip s3c_irq_wdtac97 = {
+ .irq_mask = s3c_irq_wdtac97_mask,
+ .irq_unmask = s3c_irq_wdtac97_unmask,
+ .irq_ack = s3c_irq_wdtac97_ack,
+};
+
+static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
+{
+ unsigned int irqno;
+
+ printk("S3C2440: IRQ Support\n");
+
+ /* add new chained handler for wdt, ac7 */
+
+ irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
+
+ for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static struct subsys_interface s3c2440_irq_interface = {
+ .name = "s3c2440_irq",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2440_irq_add,
+};
+
+static int s3c2440_irq_init(void)
+{
+ return subsys_interface_register(&s3c2440_irq_interface);
+}
+
+arch_initcall(s3c2440_irq_init);
+
void __init s3c2440_init_irq(void)
{
unsigned int irqno;
--
1.7.2.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 3/6] ARM: S3C24XX: move s3c2440 irqs to common irq code
@ 2013-02-05 23:13 ` Heiko Stübner
0 siblings, 0 replies; 14+ messages in thread
From: Heiko Stübner @ 2013-02-05 23:13 UTC (permalink / raw)
To: linux-arm-kernel
Will be integrated in the following patch.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/Makefile | 2 +-
arch/arm/mach-s3c24xx/irq-s3c2440.c | 128 -----------------------------------
arch/arm/mach-s3c24xx/irq.c | 88 ++++++++++++++++++++++++
3 files changed, 89 insertions(+), 129 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2440.c
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 051b8f9..9041260 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -31,7 +31,7 @@ obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o
obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o
obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2440.c b/arch/arm/mach-s3c24xx/irq-s3c2440.c
deleted file mode 100644
index 4a18cde..0000000
--- a/arch/arm/mach-s3c24xx/irq-s3c2440.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 13;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_WDT);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_AC97);
- }
- }
-}
-
-
-#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static struct irq_chip s3c_irq_wdtac97 = {
- .irq_mask = s3c_irq_wdtac97_mask,
- .irq_unmask = s3c_irq_wdtac97_unmask,
- .irq_ack = s3c_irq_wdtac97_ack,
-};
-
-static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int irqno;
-
- printk("S3C2440: IRQ Support\n");
-
- /* add new chained handler for wdt, ac7 */
-
- irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
- for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index c544e00..592072b 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -786,6 +786,94 @@ static struct irq_chip s3c_irq_cam = {
};
#ifdef CONFIG_CPU_S3C2440
+/* WDT/AC97 */
+
+static void s3c_irq_demux_wdtac97(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= 13;
+ subsrc &= 3;
+
+ if (subsrc != 0) {
+ if (subsrc & 1) {
+ generic_handle_irq(IRQ_S3C2440_WDT);
+ }
+ if (subsrc & 2) {
+ generic_handle_irq(IRQ_S3C2440_AC97);
+ }
+ }
+}
+
+
+#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
+
+static void
+s3c_irq_wdtac97_mask(struct irq_data *data)
+{
+ s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
+}
+
+static void
+s3c_irq_wdtac97_unmask(struct irq_data *data)
+{
+ s3c_irqsub_unmask(data->irq, INTMSK_WDT);
+}
+
+static void
+s3c_irq_wdtac97_ack(struct irq_data *data)
+{
+ s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
+}
+
+static struct irq_chip s3c_irq_wdtac97 = {
+ .irq_mask = s3c_irq_wdtac97_mask,
+ .irq_unmask = s3c_irq_wdtac97_unmask,
+ .irq_ack = s3c_irq_wdtac97_ack,
+};
+
+static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
+{
+ unsigned int irqno;
+
+ printk("S3C2440: IRQ Support\n");
+
+ /* add new chained handler for wdt, ac7 */
+
+ irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
+
+ for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static struct subsys_interface s3c2440_irq_interface = {
+ .name = "s3c2440_irq",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2440_irq_add,
+};
+
+static int s3c2440_irq_init(void)
+{
+ return subsys_interface_register(&s3c2440_irq_interface);
+}
+
+arch_initcall(s3c2440_irq_init);
+
void __init s3c2440_init_irq(void)
{
unsigned int irqno;
--
1.7.2.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 4/6] ARM: S3C24XX: integrate s3c2440 irqs into common init
2013-02-05 23:10 ` Heiko Stübner
@ 2013-02-05 23:14 ` Heiko Stübner
-1 siblings, 0 replies; 14+ messages in thread
From: Heiko Stübner @ 2013-02-05 23:14 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
Now all the arch_initcalls for s3c244x are gone.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/irq.c | 46 ++++++++++++------------------------------
1 files changed, 13 insertions(+), 33 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 592072b..998e6a8 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -840,44 +840,12 @@ static struct irq_chip s3c_irq_wdtac97 = {
.irq_ack = s3c_irq_wdtac97_ack,
};
-static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
+void __init s3c2440_init_irq(void)
{
unsigned int irqno;
printk("S3C2440: IRQ Support\n");
- /* add new chained handler for wdt, ac7 */
-
- irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
- for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
-void __init s3c2440_init_irq(void)
-{
- unsigned int irqno;
-
s3c24xx_init_irq();
irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
@@ -895,6 +863,18 @@ void __init s3c2440_init_irq(void)
handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
+
+ /* add new chained handler for wdt, ac7 */
+
+ irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
+
+ for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
}
#endif
--
1.7.2.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 4/6] ARM: S3C24XX: integrate s3c2440 irqs into common init
@ 2013-02-05 23:14 ` Heiko Stübner
0 siblings, 0 replies; 14+ messages in thread
From: Heiko Stübner @ 2013-02-05 23:14 UTC (permalink / raw)
To: linux-arm-kernel
Now all the arch_initcalls for s3c244x are gone.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/irq.c | 46 ++++++++++++------------------------------
1 files changed, 13 insertions(+), 33 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 592072b..998e6a8 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -840,44 +840,12 @@ static struct irq_chip s3c_irq_wdtac97 = {
.irq_ack = s3c_irq_wdtac97_ack,
};
-static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
+void __init s3c2440_init_irq(void)
{
unsigned int irqno;
printk("S3C2440: IRQ Support\n");
- /* add new chained handler for wdt, ac7 */
-
- irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
- for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
-void __init s3c2440_init_irq(void)
-{
- unsigned int irqno;
-
s3c24xx_init_irq();
irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
@@ -895,6 +863,18 @@ void __init s3c2440_init_irq(void)
handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
+
+ /* add new chained handler for wdt, ac7 */
+
+ irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
+
+ for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
}
#endif
--
1.7.2.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 5/6] ARM: S3C24XX: transform s3c2442 irqs into new structure
2013-02-05 23:10 ` Heiko Stübner
@ 2013-02-05 23:14 ` Heiko Stübner
-1 siblings, 0 replies; 14+ messages in thread
From: Heiko Stübner @ 2013-02-05 23:14 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
Simply declare a correct mapping structure to use the common irq code.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/irq.c | 78 ++++++++++++++++++++++++++++++++++--------
1 files changed, 63 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 998e6a8..01358a5 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -879,27 +879,75 @@ void __init s3c2440_init_irq(void)
#endif
#ifdef CONFIG_CPU_S3C2442
-void __init s3c2442_init_irq(void)
-{
- unsigned int irqno;
+static struct s3c_irq_data init_s3c2442base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
- s3c24xx_init_irq();
+static struct s3c_irq_data init_s3c2442subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */
+};
- irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
- handle_level_irq);
- set_irq_flags(IRQ_NFCON, IRQF_VALID);
+void __init s3c2442_init_irq(void)
+{
+ struct s3c_irq_intc *main_intc;
- /* add chained handler for camera */
+ pr_info("S3C2442: IRQ Support\n");
- irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
- for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_cam,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
+ main_intc = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL, 0x4a000000);
+ if (IS_ERR(main_intc)) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
}
+
+ s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+ s3c24xx_init_intc(NULL, &init_s3c2442subint[0], main_intc, 0x4a000018);
}
#endif
--
1.7.2.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 5/6] ARM: S3C24XX: transform s3c2442 irqs into new structure
@ 2013-02-05 23:14 ` Heiko Stübner
0 siblings, 0 replies; 14+ messages in thread
From: Heiko Stübner @ 2013-02-05 23:14 UTC (permalink / raw)
To: linux-arm-kernel
Simply declare a correct mapping structure to use the common irq code.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/irq.c | 78 ++++++++++++++++++++++++++++++++++--------
1 files changed, 63 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 998e6a8..01358a5 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -879,27 +879,75 @@ void __init s3c2440_init_irq(void)
#endif
#ifdef CONFIG_CPU_S3C2442
-void __init s3c2442_init_irq(void)
-{
- unsigned int irqno;
+static struct s3c_irq_data init_s3c2442base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
- s3c24xx_init_irq();
+static struct s3c_irq_data init_s3c2442subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */
+};
- irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
- handle_level_irq);
- set_irq_flags(IRQ_NFCON, IRQF_VALID);
+void __init s3c2442_init_irq(void)
+{
+ struct s3c_irq_intc *main_intc;
- /* add chained handler for camera */
+ pr_info("S3C2442: IRQ Support\n");
- irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
- for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_cam,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
+ main_intc = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL, 0x4a000000);
+ if (IS_ERR(main_intc)) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
}
+
+ s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+ s3c24xx_init_intc(NULL, &init_s3c2442subint[0], main_intc, 0x4a000018);
}
#endif
--
1.7.2.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 6/6] ARM: S3C24XX: transform s3c2440 irqs into new structure
2013-02-05 23:10 ` Heiko Stübner
@ 2013-02-05 23:16 ` Heiko Stübner
-1 siblings, 0 replies; 14+ messages in thread
From: Heiko Stübner @ 2013-02-05 23:16 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
As always a mapping structure is everything needed.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/irq.c | 196 +++++++++++++-----------------------------
1 files changed, 61 insertions(+), 135 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 01358a5..26b17a1 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -731,150 +731,78 @@ void __init s3c2416_init_irq(void)
#endif
-#ifdef CONFIG_CPU_S3C244X
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 11;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_CAM_C);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_CAM_P);
- }
- }
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static void
-s3c_irq_cam_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static struct irq_chip s3c_irq_cam = {
- .irq_mask = s3c_irq_cam_mask,
- .irq_unmask = s3c_irq_cam_unmask,
- .irq_ack = s3c_irq_cam_ack,
-};
-
#ifdef CONFIG_CPU_S3C2440
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 13;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_WDT);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_AC97);
- }
- }
-}
-
-
-#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
-}
+static struct s3c_irq_data init_s3c2440base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
-static struct irq_chip s3c_irq_wdtac97 = {
- .irq_mask = s3c_irq_wdtac97_mask,
- .irq_unmask = s3c_irq_wdtac97_unmask,
- .irq_ack = s3c_irq_wdtac97_ack,
+static struct s3c_irq_data init_s3c2440subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
};
void __init s3c2440_init_irq(void)
{
- unsigned int irqno;
-
- printk("S3C2440: IRQ Support\n");
-
- s3c24xx_init_irq();
-
- irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
- handle_level_irq);
- set_irq_flags(IRQ_NFCON, IRQF_VALID);
+ struct s3c_irq_intc *main_intc;
- /* add chained handler for camera */
+ pr_info("S3C2440: IRQ Support\n");
- irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
- for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_cam,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
+ main_intc = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL, 0x4a000000);
+ if (IS_ERR(main_intc)) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
}
- /* add new chained handler for wdt, ac7 */
-
- irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
- for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
+ s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+ s3c24xx_init_intc(NULL, &init_s3c2440subint[0], main_intc, 0x4a000018);
}
#endif
@@ -951,8 +879,6 @@ void __init s3c2442_init_irq(void)
}
#endif
-#endif
-
#ifdef CONFIG_CPU_S3C2443
static struct s3c_irq_data init_s3c2443base[32] = {
{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
--
1.7.2.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 6/6] ARM: S3C24XX: transform s3c2440 irqs into new structure
@ 2013-02-05 23:16 ` Heiko Stübner
0 siblings, 0 replies; 14+ messages in thread
From: Heiko Stübner @ 2013-02-05 23:16 UTC (permalink / raw)
To: linux-arm-kernel
As always a mapping structure is everything needed.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/irq.c | 196 +++++++++++++-----------------------------
1 files changed, 61 insertions(+), 135 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 01358a5..26b17a1 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -731,150 +731,78 @@ void __init s3c2416_init_irq(void)
#endif
-#ifdef CONFIG_CPU_S3C244X
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 11;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_CAM_C);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_CAM_P);
- }
- }
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static void
-s3c_irq_cam_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static struct irq_chip s3c_irq_cam = {
- .irq_mask = s3c_irq_cam_mask,
- .irq_unmask = s3c_irq_cam_unmask,
- .irq_ack = s3c_irq_cam_ack,
-};
-
#ifdef CONFIG_CPU_S3C2440
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 13;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_WDT);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_AC97);
- }
- }
-}
-
-
-#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
-}
+static struct s3c_irq_data init_s3c2440base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
-static struct irq_chip s3c_irq_wdtac97 = {
- .irq_mask = s3c_irq_wdtac97_mask,
- .irq_unmask = s3c_irq_wdtac97_unmask,
- .irq_ack = s3c_irq_wdtac97_ack,
+static struct s3c_irq_data init_s3c2440subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
};
void __init s3c2440_init_irq(void)
{
- unsigned int irqno;
-
- printk("S3C2440: IRQ Support\n");
-
- s3c24xx_init_irq();
-
- irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
- handle_level_irq);
- set_irq_flags(IRQ_NFCON, IRQF_VALID);
+ struct s3c_irq_intc *main_intc;
- /* add chained handler for camera */
+ pr_info("S3C2440: IRQ Support\n");
- irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
- for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_cam,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
+ main_intc = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL, 0x4a000000);
+ if (IS_ERR(main_intc)) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
}
- /* add new chained handler for wdt, ac7 */
-
- irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
- for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
+ s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+ s3c24xx_init_intc(NULL, &init_s3c2440subint[0], main_intc, 0x4a000018);
}
#endif
@@ -951,8 +879,6 @@ void __init s3c2442_init_irq(void)
}
#endif
-#endif
-
#ifdef CONFIG_CPU_S3C2443
static struct s3c_irq_data init_s3c2443base[32] = {
{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
--
1.7.2.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
end of thread, other threads:[~2013-02-05 23:16 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-02-05 23:10 [PATCH 0/6] ARM: S3C24XX: Move s3c2440 and s3c2442 into new irq structure Heiko Stübner
2013-02-05 23:10 ` Heiko Stübner
2013-02-05 23:11 ` [PATCH 1/6] ARM: S3C24XX: move s3c244x irq init to common irq code Heiko Stübner
2013-02-05 23:11 ` Heiko Stübner
2013-02-05 23:12 ` [PATCH 2/6] ARM: S3C24XX: create dedicated irq init functions for s3c2440 and s3c2442 Heiko Stübner
2013-02-05 23:12 ` Heiko Stübner
2013-02-05 23:13 ` [PATCH 3/6] ARM: S3C24XX: move s3c2440 irqs to common irq code Heiko Stübner
2013-02-05 23:13 ` Heiko Stübner
2013-02-05 23:14 ` [PATCH 4/6] ARM: S3C24XX: integrate s3c2440 irqs into common init Heiko Stübner
2013-02-05 23:14 ` Heiko Stübner
2013-02-05 23:14 ` [PATCH 5/6] ARM: S3C24XX: transform s3c2442 irqs into new structure Heiko Stübner
2013-02-05 23:14 ` Heiko Stübner
2013-02-05 23:16 ` [PATCH 6/6] ARM: S3C24XX: transform s3c2440 " Heiko Stübner
2013-02-05 23:16 ` Heiko Stübner
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.