* [PATCH 00/03] ARM: shmobile: r8a73a4 APE6EVM board support V2
@ 2013-03-18 15:09 ` Magnus Damm
0 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-18 15:09 UTC (permalink / raw)
To: linux-arm-kernel
ARM: shmobile: r8a73a4 APE6EVM board support V2
[PATCH 01/03] ARM: shmobile: APE6EVM base support V2
[PATCH 02/03] ARM: shmobile: APE6EVM PFC support
[PATCH 03/03] ARM: shmobile: APE6EVM LAN9220 support
This series is V2 of initial support for the APE6EVM board.
The APE6EVM board makes use of the r8a73a4 SoC and has a
couple of different I/O devices on board, but with this
series only support for the SCIFA0 UART and the Ethernet
chip is included.
In the future support for more I/O devices will be added as
incremental feature patches.
Changes since V1:
- Went from single patch to series
- Use ape6evm_add_standard_devices() to setup SoC devices and clocks
- Use PFC to configure SCIFA0
- Add Ethernet support including PFC support
For more details please see the individual patches.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
Depends on the following two series:
[PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
[PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
arch/arm/boot/dts/Makefile | 1
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 47 ++++++++++++++++
arch/arm/mach-shmobile/Kconfig | 10 +++
arch/arm/mach-shmobile/Makefile | 1
arch/arm/mach-shmobile/board-ape6evm.c | 89 ++++++++++++++++++++++++++++++++
5 files changed, 147 insertions(+), 1 deletion(-)
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
2013-03-18 15:09 ` Magnus Damm
@ 2013-03-18 15:10 ` Magnus Damm
-1 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-18 15:10 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm@opensource.se>
V2 of APE6EVM base board support making use of
1 GiB of memory, the SCIFA0 serial port and
ARM architected timer.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
Changes since V1:
- Sorted headers
- Use ape6evm_add_standard_devices() to setup SoC devices and clocks
Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
Depends on the following series:
[PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
Does not depend on:
[PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
arch/arm/boot/dts/Makefile | 1
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 26 ++++++++++++++++++
arch/arm/mach-shmobile/Kconfig | 8 ++++-
arch/arm/mach-shmobile/Makefile | 1
arch/arm/mach-shmobile/board-ape6evm.c | 46 ++++++++++++++++++++++++++++++++
5 files changed, 81 insertions(+), 1 deletion(-)
--- 0001/arch/arm/boot/dts/Makefile
+++ work/arch/arm/boot/dts/Makefile 2013-03-18 21:44:34.000000000 +0900
@@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm
r8a7779-marzen-reference.dtb \
sh73a0-kzm9g.dtb \
sh73a0-kzm9g-reference.dtb \
+ r8a73a4-ape6evm.dtb \
sh7372-mackerel.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
socfpga_vt.dtb
--- /dev/null
+++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 21:44:35.000000000 +0900
@@ -0,0 +1,26 @@
+/*
+ * Device Tree Source for the APE6EVM board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a73a4.dtsi"
+
+/ {
+ model = "APE6EVM";
+ compatible = "renesas,ape6evm", "renesas,r8a73a4";
+
+ chosen {
+ bootargs = "console=ttySC0,115200 ignore_loglevel";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x40000000>;
+ };
+};
--- 0007/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2013-03-18 21:44:34.000000000 +0900
@@ -79,6 +79,11 @@ config MACH_AG5EVM
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SH_LCD_MIPI_DSI
+config MACH_APE6EVM
+ bool "APE6EVM board"
+ depends on ARCH_R8A73A4
+ select USE_OF
+
config MACH_MACKEREL
bool "mackerel board"
depends on ARCH_SH7372
@@ -166,7 +171,7 @@ config MEMORY_START
hex "Physical memory start address"
default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \
MACH_MACKEREL || MACH_BONITO || \
- MACH_ARMADILLO800EVA
+ MACH_ARMADILLO800EVA || MACH_APE6EVM
default "0x41000000" if MACH_KOTA2
default "0x00000000"
---help---
@@ -176,6 +181,7 @@ config MEMORY_START
config MEMORY_SIZE
hex "Physical memory size"
+ default "0x40000000" if MACH_APE6EVM
default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
MACH_ARMADILLO800EVA
default "0x1e000000" if MACH_KOTA2
--- 0003/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile 2013-03-18 21:44:34.000000000 +0900
@@ -35,6 +35,7 @@ obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o
# Board objects
obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o
obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o
+obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
obj-$(CONFIG_MACH_KOTA2) += board-kota2.o
obj-$(CONFIG_MACH_BONITO) += board-bonito.o
--- /dev/null
+++ work/arch/arm/mach-shmobile/board-ape6evm.c 2013-03-18 21:45:34.000000000 +0900
@@ -0,0 +1,46 @@
+/*
+ * APE6EVM board support
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irqchip.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <mach/common.h>
+#include <mach/r8a73a4.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init ape6evm_add_standard_devices(void)
+{
+ r8a73a4_clock_init();
+ r8a73a4_add_standard_devices();
+}
+
+static const char *ape6evm_boards_compat_dt[] __initdata = {
+ "renesas,ape6evm",
+ NULL,
+};
+
+DT_MACHINE_START(APE6EVM_DT, "ape6evm")
+ .init_irq = irqchip_init,
+ .init_time = shmobile_timer_init,
+ .init_machine = ape6evm_add_standard_devices,
+ .dt_compat = ape6evm_boards_compat_dt,
+MACHINE_END
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
@ 2013-03-18 15:10 ` Magnus Damm
0 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-18 15:10 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm@opensource.se>
V2 of APE6EVM base board support making use of
1 GiB of memory, the SCIFA0 serial port and
ARM architected timer.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
Changes since V1:
- Sorted headers
- Use ape6evm_add_standard_devices() to setup SoC devices and clocks
Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
Depends on the following series:
[PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
Does not depend on:
[PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
arch/arm/boot/dts/Makefile | 1
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 26 ++++++++++++++++++
arch/arm/mach-shmobile/Kconfig | 8 ++++-
arch/arm/mach-shmobile/Makefile | 1
arch/arm/mach-shmobile/board-ape6evm.c | 46 ++++++++++++++++++++++++++++++++
5 files changed, 81 insertions(+), 1 deletion(-)
--- 0001/arch/arm/boot/dts/Makefile
+++ work/arch/arm/boot/dts/Makefile 2013-03-18 21:44:34.000000000 +0900
@@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm
r8a7779-marzen-reference.dtb \
sh73a0-kzm9g.dtb \
sh73a0-kzm9g-reference.dtb \
+ r8a73a4-ape6evm.dtb \
sh7372-mackerel.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
socfpga_vt.dtb
--- /dev/null
+++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 21:44:35.000000000 +0900
@@ -0,0 +1,26 @@
+/*
+ * Device Tree Source for the APE6EVM board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a73a4.dtsi"
+
+/ {
+ model = "APE6EVM";
+ compatible = "renesas,ape6evm", "renesas,r8a73a4";
+
+ chosen {
+ bootargs = "console=ttySC0,115200 ignore_loglevel";
+ };
+
+ memory at 40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x40000000>;
+ };
+};
--- 0007/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2013-03-18 21:44:34.000000000 +0900
@@ -79,6 +79,11 @@ config MACH_AG5EVM
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SH_LCD_MIPI_DSI
+config MACH_APE6EVM
+ bool "APE6EVM board"
+ depends on ARCH_R8A73A4
+ select USE_OF
+
config MACH_MACKEREL
bool "mackerel board"
depends on ARCH_SH7372
@@ -166,7 +171,7 @@ config MEMORY_START
hex "Physical memory start address"
default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \
MACH_MACKEREL || MACH_BONITO || \
- MACH_ARMADILLO800EVA
+ MACH_ARMADILLO800EVA || MACH_APE6EVM
default "0x41000000" if MACH_KOTA2
default "0x00000000"
---help---
@@ -176,6 +181,7 @@ config MEMORY_START
config MEMORY_SIZE
hex "Physical memory size"
+ default "0x40000000" if MACH_APE6EVM
default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
MACH_ARMADILLO800EVA
default "0x1e000000" if MACH_KOTA2
--- 0003/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile 2013-03-18 21:44:34.000000000 +0900
@@ -35,6 +35,7 @@ obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o
# Board objects
obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o
obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o
+obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
obj-$(CONFIG_MACH_KOTA2) += board-kota2.o
obj-$(CONFIG_MACH_BONITO) += board-bonito.o
--- /dev/null
+++ work/arch/arm/mach-shmobile/board-ape6evm.c 2013-03-18 21:45:34.000000000 +0900
@@ -0,0 +1,46 @@
+/*
+ * APE6EVM board support
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irqchip.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <mach/common.h>
+#include <mach/r8a73a4.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init ape6evm_add_standard_devices(void)
+{
+ r8a73a4_clock_init();
+ r8a73a4_add_standard_devices();
+}
+
+static const char *ape6evm_boards_compat_dt[] __initdata = {
+ "renesas,ape6evm",
+ NULL,
+};
+
+DT_MACHINE_START(APE6EVM_DT, "ape6evm")
+ .init_irq = irqchip_init,
+ .init_time = shmobile_timer_init,
+ .init_machine = ape6evm_add_standard_devices,
+ .dt_compat = ape6evm_boards_compat_dt,
+MACHINE_END
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
2013-03-18 15:10 ` Magnus Damm
@ 2013-03-19 7:25 ` Simon Horman
-1 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2013-03-19 7:25 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 19, 2013 at 12:10:02AM +0900, Magnus Damm wrote:
> From: Magnus Damm <damm@opensource.se>
>
> V2 of APE6EVM base board support making use of
> 1 GiB of memory, the SCIFA0 serial port and
> ARM architected timer.
>
> Signed-off-by: Magnus Damm <damm@opensource.se>
> ---
>
> Changes since V1:
> - Sorted headers
> - Use ape6evm_add_standard_devices() to setup SoC devices and clocks
>
> Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
>
> Depends on the following series:
> [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
>
> Does not depend on:
> [PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
>
> arch/arm/boot/dts/Makefile | 1
> arch/arm/boot/dts/r8a73a4-ape6evm.dts | 26 ++++++++++++++++++
> arch/arm/mach-shmobile/Kconfig | 8 ++++-
> arch/arm/mach-shmobile/Makefile | 1
> arch/arm/mach-shmobile/board-ape6evm.c | 46 ++++++++++++++++++++++++++++++++
> 5 files changed, 81 insertions(+), 1 deletion(-)
>
> --- 0001/arch/arm/boot/dts/Makefile
> +++ work/arch/arm/boot/dts/Makefile 2013-03-18 21:44:34.000000000 +0900
> @@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm
> r8a7779-marzen-reference.dtb \
> sh73a0-kzm9g.dtb \
> sh73a0-kzm9g-reference.dtb \
> + r8a73a4-ape6evm.dtb \
> sh7372-mackerel.dtb
> dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
> socfpga_vt.dtb
> --- /dev/null
> +++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 21:44:35.000000000 +0900
> @@ -0,0 +1,26 @@
> +/*
> + * Device Tree Source for the APE6EVM board
> + *
> + * Copyright (C) 2013 Renesas Solutions Corp.
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2. This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +/dts-v1/;
> +/include/ "r8a73a4.dtsi"
> +
> +/ {
> + model = "APE6EVM";
> + compatible = "renesas,ape6evm", "renesas,r8a73a4";
> +
> + chosen {
> + bootargs = "console=ttySC0,115200 ignore_loglevel";
I think that earlyprintk=sh-sci.0,11520 go in here.
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0x40000000 0x40000000>;
> + };
> +};
> --- 0007/arch/arm/mach-shmobile/Kconfig
> +++ work/arch/arm/mach-shmobile/Kconfig 2013-03-18 21:44:34.000000000 +0900
> @@ -79,6 +79,11 @@ config MACH_AG5EVM
> select REGULATOR_FIXED_VOLTAGE if REGULATOR
> select SH_LCD_MIPI_DSI
>
> +config MACH_APE6EVM
> + bool "APE6EVM board"
> + depends on ARCH_R8A73A4
> + select USE_OF
> +
> config MACH_MACKEREL
> bool "mackerel board"
> depends on ARCH_SH7372
> @@ -166,7 +171,7 @@ config MEMORY_START
> hex "Physical memory start address"
> default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \
> MACH_MACKEREL || MACH_BONITO || \
> - MACH_ARMADILLO800EVA
> + MACH_ARMADILLO800EVA || MACH_APE6EVM
> default "0x41000000" if MACH_KOTA2
> default "0x00000000"
> ---help---
> @@ -176,6 +181,7 @@ config MEMORY_START
>
> config MEMORY_SIZE
> hex "Physical memory size"
> + default "0x40000000" if MACH_APE6EVM
> default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
> MACH_ARMADILLO800EVA
> default "0x1e000000" if MACH_KOTA2
> --- 0003/arch/arm/mach-shmobile/Makefile
> +++ work/arch/arm/mach-shmobile/Makefile 2013-03-18 21:44:34.000000000 +0900
> @@ -35,6 +35,7 @@ obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o
> # Board objects
> obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o
> obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o
> +obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
> obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
> obj-$(CONFIG_MACH_KOTA2) += board-kota2.o
> obj-$(CONFIG_MACH_BONITO) += board-bonito.o
> --- /dev/null
> +++ work/arch/arm/mach-shmobile/board-ape6evm.c 2013-03-18 21:45:34.000000000 +0900
> @@ -0,0 +1,46 @@
> +/*
> + * APE6EVM board support
> + *
> + * Copyright (C) 2013 Renesas Solutions Corp.
> + * Copyright (C) 2013 Magnus Damm
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/irqchip.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <mach/common.h>
> +#include <mach/r8a73a4.h>
> +#include <asm/mach-types.h>
> +#include <asm/mach/arch.h>
> +
> +static void __init ape6evm_add_standard_devices(void)
> +{
> + r8a73a4_clock_init();
> + r8a73a4_add_standard_devices();
> +}
> +
> +static const char *ape6evm_boards_compat_dt[] __initdata = {
> + "renesas,ape6evm",
> + NULL,
> +};
> +
> +DT_MACHINE_START(APE6EVM_DT, "ape6evm")
> + .init_irq = irqchip_init,
> + .init_time = shmobile_timer_init,
> + .init_machine = ape6evm_add_standard_devices,
> + .dt_compat = ape6evm_boards_compat_dt,
> +MACHINE_END
>
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
@ 2013-03-19 7:25 ` Simon Horman
0 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2013-03-19 7:25 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 19, 2013 at 12:10:02AM +0900, Magnus Damm wrote:
> From: Magnus Damm <damm@opensource.se>
>
> V2 of APE6EVM base board support making use of
> 1 GiB of memory, the SCIFA0 serial port and
> ARM architected timer.
>
> Signed-off-by: Magnus Damm <damm@opensource.se>
> ---
>
> Changes since V1:
> - Sorted headers
> - Use ape6evm_add_standard_devices() to setup SoC devices and clocks
>
> Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
>
> Depends on the following series:
> [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
>
> Does not depend on:
> [PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
>
> arch/arm/boot/dts/Makefile | 1
> arch/arm/boot/dts/r8a73a4-ape6evm.dts | 26 ++++++++++++++++++
> arch/arm/mach-shmobile/Kconfig | 8 ++++-
> arch/arm/mach-shmobile/Makefile | 1
> arch/arm/mach-shmobile/board-ape6evm.c | 46 ++++++++++++++++++++++++++++++++
> 5 files changed, 81 insertions(+), 1 deletion(-)
>
> --- 0001/arch/arm/boot/dts/Makefile
> +++ work/arch/arm/boot/dts/Makefile 2013-03-18 21:44:34.000000000 +0900
> @@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm
> r8a7779-marzen-reference.dtb \
> sh73a0-kzm9g.dtb \
> sh73a0-kzm9g-reference.dtb \
> + r8a73a4-ape6evm.dtb \
> sh7372-mackerel.dtb
> dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
> socfpga_vt.dtb
> --- /dev/null
> +++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 21:44:35.000000000 +0900
> @@ -0,0 +1,26 @@
> +/*
> + * Device Tree Source for the APE6EVM board
> + *
> + * Copyright (C) 2013 Renesas Solutions Corp.
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2. This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +/dts-v1/;
> +/include/ "r8a73a4.dtsi"
> +
> +/ {
> + model = "APE6EVM";
> + compatible = "renesas,ape6evm", "renesas,r8a73a4";
> +
> + chosen {
> + bootargs = "console=ttySC0,115200 ignore_loglevel";
I think that earlyprintk=sh-sci.0,11520 go in here.
> + };
> +
> + memory at 40000000 {
> + device_type = "memory";
> + reg = <0x40000000 0x40000000>;
> + };
> +};
> --- 0007/arch/arm/mach-shmobile/Kconfig
> +++ work/arch/arm/mach-shmobile/Kconfig 2013-03-18 21:44:34.000000000 +0900
> @@ -79,6 +79,11 @@ config MACH_AG5EVM
> select REGULATOR_FIXED_VOLTAGE if REGULATOR
> select SH_LCD_MIPI_DSI
>
> +config MACH_APE6EVM
> + bool "APE6EVM board"
> + depends on ARCH_R8A73A4
> + select USE_OF
> +
> config MACH_MACKEREL
> bool "mackerel board"
> depends on ARCH_SH7372
> @@ -166,7 +171,7 @@ config MEMORY_START
> hex "Physical memory start address"
> default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \
> MACH_MACKEREL || MACH_BONITO || \
> - MACH_ARMADILLO800EVA
> + MACH_ARMADILLO800EVA || MACH_APE6EVM
> default "0x41000000" if MACH_KOTA2
> default "0x00000000"
> ---help---
> @@ -176,6 +181,7 @@ config MEMORY_START
>
> config MEMORY_SIZE
> hex "Physical memory size"
> + default "0x40000000" if MACH_APE6EVM
> default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
> MACH_ARMADILLO800EVA
> default "0x1e000000" if MACH_KOTA2
> --- 0003/arch/arm/mach-shmobile/Makefile
> +++ work/arch/arm/mach-shmobile/Makefile 2013-03-18 21:44:34.000000000 +0900
> @@ -35,6 +35,7 @@ obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o
> # Board objects
> obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o
> obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o
> +obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
> obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
> obj-$(CONFIG_MACH_KOTA2) += board-kota2.o
> obj-$(CONFIG_MACH_BONITO) += board-bonito.o
> --- /dev/null
> +++ work/arch/arm/mach-shmobile/board-ape6evm.c 2013-03-18 21:45:34.000000000 +0900
> @@ -0,0 +1,46 @@
> +/*
> + * APE6EVM board support
> + *
> + * Copyright (C) 2013 Renesas Solutions Corp.
> + * Copyright (C) 2013 Magnus Damm
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/irqchip.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <mach/common.h>
> +#include <mach/r8a73a4.h>
> +#include <asm/mach-types.h>
> +#include <asm/mach/arch.h>
> +
> +static void __init ape6evm_add_standard_devices(void)
> +{
> + r8a73a4_clock_init();
> + r8a73a4_add_standard_devices();
> +}
> +
> +static const char *ape6evm_boards_compat_dt[] __initdata = {
> + "renesas,ape6evm",
> + NULL,
> +};
> +
> +DT_MACHINE_START(APE6EVM_DT, "ape6evm")
> + .init_irq = irqchip_init,
> + .init_time = shmobile_timer_init,
> + .init_machine = ape6evm_add_standard_devices,
> + .dt_compat = ape6evm_boards_compat_dt,
> +MACHINE_END
>
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
2013-03-19 7:25 ` Simon Horman
@ 2013-03-19 7:50 ` Simon Horman
-1 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2013-03-19 7:50 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 19, 2013 at 04:25:33PM +0900, Simon Horman wrote:
> On Tue, Mar 19, 2013 at 12:10:02AM +0900, Magnus Damm wrote:
> > From: Magnus Damm <damm@opensource.se>
> >
> > V2 of APE6EVM base board support making use of
> > 1 GiB of memory, the SCIFA0 serial port and
> > ARM architected timer.
> >
> > Signed-off-by: Magnus Damm <damm@opensource.se>
> > ---
> >
> > Changes since V1:
> > - Sorted headers
> > - Use ape6evm_add_standard_devices() to setup SoC devices and clocks
> >
> > Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
> >
> > Depends on the following series:
> > [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
> >
> > Does not depend on:
> > [PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
> >
> > arch/arm/boot/dts/Makefile | 1
> > arch/arm/boot/dts/r8a73a4-ape6evm.dts | 26 ++++++++++++++++++
> > arch/arm/mach-shmobile/Kconfig | 8 ++++-
> > arch/arm/mach-shmobile/Makefile | 1
> > arch/arm/mach-shmobile/board-ape6evm.c | 46 ++++++++++++++++++++++++++++++++
> > 5 files changed, 81 insertions(+), 1 deletion(-)
> >
> > --- 0001/arch/arm/boot/dts/Makefile
> > +++ work/arch/arm/boot/dts/Makefile 2013-03-18 21:44:34.000000000 +0900
> > @@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm
> > r8a7779-marzen-reference.dtb \
> > sh73a0-kzm9g.dtb \
> > sh73a0-kzm9g-reference.dtb \
> > + r8a73a4-ape6evm.dtb \
> > sh7372-mackerel.dtb
> > dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
> > socfpga_vt.dtb
> > --- /dev/null
> > +++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 21:44:35.000000000 +0900
> > @@ -0,0 +1,26 @@
> > +/*
> > + * Device Tree Source for the APE6EVM board
> > + *
> > + * Copyright (C) 2013 Renesas Solutions Corp.
> > + *
> > + * This file is licensed under the terms of the GNU General Public License
> > + * version 2. This program is licensed "as is" without any warranty of any
> > + * kind, whether express or implied.
> > + */
> > +
> > +/dts-v1/;
> > +/include/ "r8a73a4.dtsi"
> > +
> > +/ {
> > + model = "APE6EVM";
> > + compatible = "renesas,ape6evm", "renesas,r8a73a4";
> > +
> > + chosen {
> > + bootargs = "console=ttySC0,115200 ignore_loglevel";
>
> I think that earlyprintk=sh-sci.0,11520 go in here.
Also, to be consistent with the dts of other shmobile boards
could you add root=/dev/nfs ip=dhcp. This history behind this
is that many boards defaulted to using nfsroot in their defconfigs,
a reasonable default IMHO, and recently the command line for all
boards that boot using DT was moved from their defconfig
to their .dtsi in preparation for defconfig consolidation.
[snip]
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
@ 2013-03-19 7:50 ` Simon Horman
0 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2013-03-19 7:50 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 19, 2013 at 04:25:33PM +0900, Simon Horman wrote:
> On Tue, Mar 19, 2013 at 12:10:02AM +0900, Magnus Damm wrote:
> > From: Magnus Damm <damm@opensource.se>
> >
> > V2 of APE6EVM base board support making use of
> > 1 GiB of memory, the SCIFA0 serial port and
> > ARM architected timer.
> >
> > Signed-off-by: Magnus Damm <damm@opensource.se>
> > ---
> >
> > Changes since V1:
> > - Sorted headers
> > - Use ape6evm_add_standard_devices() to setup SoC devices and clocks
> >
> > Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
> >
> > Depends on the following series:
> > [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
> >
> > Does not depend on:
> > [PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
> >
> > arch/arm/boot/dts/Makefile | 1
> > arch/arm/boot/dts/r8a73a4-ape6evm.dts | 26 ++++++++++++++++++
> > arch/arm/mach-shmobile/Kconfig | 8 ++++-
> > arch/arm/mach-shmobile/Makefile | 1
> > arch/arm/mach-shmobile/board-ape6evm.c | 46 ++++++++++++++++++++++++++++++++
> > 5 files changed, 81 insertions(+), 1 deletion(-)
> >
> > --- 0001/arch/arm/boot/dts/Makefile
> > +++ work/arch/arm/boot/dts/Makefile 2013-03-18 21:44:34.000000000 +0900
> > @@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm
> > r8a7779-marzen-reference.dtb \
> > sh73a0-kzm9g.dtb \
> > sh73a0-kzm9g-reference.dtb \
> > + r8a73a4-ape6evm.dtb \
> > sh7372-mackerel.dtb
> > dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
> > socfpga_vt.dtb
> > --- /dev/null
> > +++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 21:44:35.000000000 +0900
> > @@ -0,0 +1,26 @@
> > +/*
> > + * Device Tree Source for the APE6EVM board
> > + *
> > + * Copyright (C) 2013 Renesas Solutions Corp.
> > + *
> > + * This file is licensed under the terms of the GNU General Public License
> > + * version 2. This program is licensed "as is" without any warranty of any
> > + * kind, whether express or implied.
> > + */
> > +
> > +/dts-v1/;
> > +/include/ "r8a73a4.dtsi"
> > +
> > +/ {
> > + model = "APE6EVM";
> > + compatible = "renesas,ape6evm", "renesas,r8a73a4";
> > +
> > + chosen {
> > + bootargs = "console=ttySC0,115200 ignore_loglevel";
>
> I think that earlyprintk=sh-sci.0,11520 go in here.
Also, to be consistent with the dts of other shmobile boards
could you add root=/dev/nfs ip=dhcp. This history behind this
is that many boards defaulted to using nfsroot in their defconfigs,
a reasonable default IMHO, and recently the command line for all
boards that boot using DT was moved from their defconfig
to their .dtsi in preparation for defconfig consolidation.
[snip]
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
2013-03-19 7:50 ` Simon Horman
@ 2013-03-19 10:18 ` Magnus Damm
-1 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-19 10:18 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 19, 2013 at 4:50 PM, Simon Horman <horms@verge.net.au> wrote:
> On Tue, Mar 19, 2013 at 04:25:33PM +0900, Simon Horman wrote:
>> On Tue, Mar 19, 2013 at 12:10:02AM +0900, Magnus Damm wrote:
>> > From: Magnus Damm <damm@opensource.se>
>> >
>> > V2 of APE6EVM base board support making use of
>> > 1 GiB of memory, the SCIFA0 serial port and
>> > ARM architected timer.
>> >
>> > Signed-off-by: Magnus Damm <damm@opensource.se>
>> > ---
>> >
>> > Changes since V1:
>> > - Sorted headers
>> > - Use ape6evm_add_standard_devices() to setup SoC devices and clocks
>> >
>> > Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
>> >
>> > Depends on the following series:
>> > [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
>> >
>> > Does not depend on:
>> > [PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
>> >
>> > arch/arm/boot/dts/Makefile | 1
>> > arch/arm/boot/dts/r8a73a4-ape6evm.dts | 26 ++++++++++++++++++
>> > arch/arm/mach-shmobile/Kconfig | 8 ++++-
>> > arch/arm/mach-shmobile/Makefile | 1
>> > arch/arm/mach-shmobile/board-ape6evm.c | 46 ++++++++++++++++++++++++++++++++
>> > 5 files changed, 81 insertions(+), 1 deletion(-)
>> >
>> > --- /dev/null
>> > +++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 21:44:35.000000000 +0900
>> > @@ -0,0 +1,26 @@
>> > +/*
>> > + * Device Tree Source for the APE6EVM board
>> > + *
>> > + * Copyright (C) 2013 Renesas Solutions Corp.
>> > + *
>> > + * This file is licensed under the terms of the GNU General Public License
>> > + * version 2. This program is licensed "as is" without any warranty of any
>> > + * kind, whether express or implied.
>> > + */
>> > +
>> > +/dts-v1/;
>> > +/include/ "r8a73a4.dtsi"
>> > +
>> > +/ {
>> > + model = "APE6EVM";
>> > + compatible = "renesas,ape6evm", "renesas,r8a73a4";
>> > +
>> > + chosen {
>> > + bootargs = "console=ttySC0,115200 ignore_loglevel";
>>
>> I think that earlyprintk=sh-sci.0,11520 go in here.
>
> Also, to be consistent with the dts of other shmobile boards
> could you add root=/dev/nfs ip=dhcp. This history behind this
> is that many boards defaulted to using nfsroot in their defconfigs,
> a reasonable default IMHO, and recently the command line for all
> boards that boot using DT was moved from their defconfig
> to their .dtsi in preparation for defconfig consolidation.
Sounds like a good idea. Network is however not existing until pretty
late in the series. How about adding it in that patch that includes
SMSC ethernet support?
Thanks,
/ magnus
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
@ 2013-03-19 10:18 ` Magnus Damm
0 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-19 10:18 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 19, 2013 at 4:50 PM, Simon Horman <horms@verge.net.au> wrote:
> On Tue, Mar 19, 2013 at 04:25:33PM +0900, Simon Horman wrote:
>> On Tue, Mar 19, 2013 at 12:10:02AM +0900, Magnus Damm wrote:
>> > From: Magnus Damm <damm@opensource.se>
>> >
>> > V2 of APE6EVM base board support making use of
>> > 1 GiB of memory, the SCIFA0 serial port and
>> > ARM architected timer.
>> >
>> > Signed-off-by: Magnus Damm <damm@opensource.se>
>> > ---
>> >
>> > Changes since V1:
>> > - Sorted headers
>> > - Use ape6evm_add_standard_devices() to setup SoC devices and clocks
>> >
>> > Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
>> >
>> > Depends on the following series:
>> > [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
>> >
>> > Does not depend on:
>> > [PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
>> >
>> > arch/arm/boot/dts/Makefile | 1
>> > arch/arm/boot/dts/r8a73a4-ape6evm.dts | 26 ++++++++++++++++++
>> > arch/arm/mach-shmobile/Kconfig | 8 ++++-
>> > arch/arm/mach-shmobile/Makefile | 1
>> > arch/arm/mach-shmobile/board-ape6evm.c | 46 ++++++++++++++++++++++++++++++++
>> > 5 files changed, 81 insertions(+), 1 deletion(-)
>> >
>> > --- /dev/null
>> > +++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 21:44:35.000000000 +0900
>> > @@ -0,0 +1,26 @@
>> > +/*
>> > + * Device Tree Source for the APE6EVM board
>> > + *
>> > + * Copyright (C) 2013 Renesas Solutions Corp.
>> > + *
>> > + * This file is licensed under the terms of the GNU General Public License
>> > + * version 2. This program is licensed "as is" without any warranty of any
>> > + * kind, whether express or implied.
>> > + */
>> > +
>> > +/dts-v1/;
>> > +/include/ "r8a73a4.dtsi"
>> > +
>> > +/ {
>> > + model = "APE6EVM";
>> > + compatible = "renesas,ape6evm", "renesas,r8a73a4";
>> > +
>> > + chosen {
>> > + bootargs = "console=ttySC0,115200 ignore_loglevel";
>>
>> I think that earlyprintk=sh-sci.0,11520 go in here.
>
> Also, to be consistent with the dts of other shmobile boards
> could you add root=/dev/nfs ip=dhcp. This history behind this
> is that many boards defaulted to using nfsroot in their defconfigs,
> a reasonable default IMHO, and recently the command line for all
> boards that boot using DT was moved from their defconfig
> to their .dtsi in preparation for defconfig consolidation.
Sounds like a good idea. Network is however not existing until pretty
late in the series. How about adding it in that patch that includes
SMSC ethernet support?
Thanks,
/ magnus
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
2013-03-19 10:18 ` Magnus Damm
@ 2013-03-20 12:50 ` Simon Horman
-1 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2013-03-20 12:50 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 19, 2013 at 07:18:18PM +0900, Magnus Damm wrote:
> On Tue, Mar 19, 2013 at 4:50 PM, Simon Horman <horms@verge.net.au> wrote:
> > On Tue, Mar 19, 2013 at 04:25:33PM +0900, Simon Horman wrote:
> >> On Tue, Mar 19, 2013 at 12:10:02AM +0900, Magnus Damm wrote:
> >> > From: Magnus Damm <damm@opensource.se>
> >> >
> >> > V2 of APE6EVM base board support making use of
> >> > 1 GiB of memory, the SCIFA0 serial port and
> >> > ARM architected timer.
> >> >
> >> > Signed-off-by: Magnus Damm <damm@opensource.se>
> >> > ---
> >> >
> >> > Changes since V1:
> >> > - Sorted headers
> >> > - Use ape6evm_add_standard_devices() to setup SoC devices and clocks
> >> >
> >> > Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
> >> >
> >> > Depends on the following series:
> >> > [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
> >> >
> >> > Does not depend on:
> >> > [PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
> >> >
> >> > arch/arm/boot/dts/Makefile | 1
> >> > arch/arm/boot/dts/r8a73a4-ape6evm.dts | 26 ++++++++++++++++++
> >> > arch/arm/mach-shmobile/Kconfig | 8 ++++-
> >> > arch/arm/mach-shmobile/Makefile | 1
> >> > arch/arm/mach-shmobile/board-ape6evm.c | 46 ++++++++++++++++++++++++++++++++
> >> > 5 files changed, 81 insertions(+), 1 deletion(-)
> >> >
> >> > --- /dev/null
> >> > +++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 21:44:35.000000000 +0900
> >> > @@ -0,0 +1,26 @@
> >> > +/*
> >> > + * Device Tree Source for the APE6EVM board
> >> > + *
> >> > + * Copyright (C) 2013 Renesas Solutions Corp.
> >> > + *
> >> > + * This file is licensed under the terms of the GNU General Public License
> >> > + * version 2. This program is licensed "as is" without any warranty of any
> >> > + * kind, whether express or implied.
> >> > + */
> >> > +
> >> > +/dts-v1/;
> >> > +/include/ "r8a73a4.dtsi"
> >> > +
> >> > +/ {
> >> > + model = "APE6EVM";
> >> > + compatible = "renesas,ape6evm", "renesas,r8a73a4";
> >> > +
> >> > + chosen {
> >> > + bootargs = "console=ttySC0,115200 ignore_loglevel";
> >>
> >> I think that earlyprintk=sh-sci.0,11520 go in here.
> >
> > Also, to be consistent with the dts of other shmobile boards
> > could you add root=/dev/nfs ip=dhcp. This history behind this
> > is that many boards defaulted to using nfsroot in their defconfigs,
> > a reasonable default IMHO, and recently the command line for all
> > boards that boot using DT was moved from their defconfig
> > to their .dtsi in preparation for defconfig consolidation.
>
> Sounds like a good idea. Network is however not existing until pretty
> late in the series. How about adding it in that patch that includes
> SMSC ethernet support?
Yes, that sounds reasonable to me.
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
@ 2013-03-20 12:50 ` Simon Horman
0 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2013-03-20 12:50 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 19, 2013 at 07:18:18PM +0900, Magnus Damm wrote:
> On Tue, Mar 19, 2013 at 4:50 PM, Simon Horman <horms@verge.net.au> wrote:
> > On Tue, Mar 19, 2013 at 04:25:33PM +0900, Simon Horman wrote:
> >> On Tue, Mar 19, 2013 at 12:10:02AM +0900, Magnus Damm wrote:
> >> > From: Magnus Damm <damm@opensource.se>
> >> >
> >> > V2 of APE6EVM base board support making use of
> >> > 1 GiB of memory, the SCIFA0 serial port and
> >> > ARM architected timer.
> >> >
> >> > Signed-off-by: Magnus Damm <damm@opensource.se>
> >> > ---
> >> >
> >> > Changes since V1:
> >> > - Sorted headers
> >> > - Use ape6evm_add_standard_devices() to setup SoC devices and clocks
> >> >
> >> > Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
> >> >
> >> > Depends on the following series:
> >> > [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
> >> >
> >> > Does not depend on:
> >> > [PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
> >> >
> >> > arch/arm/boot/dts/Makefile | 1
> >> > arch/arm/boot/dts/r8a73a4-ape6evm.dts | 26 ++++++++++++++++++
> >> > arch/arm/mach-shmobile/Kconfig | 8 ++++-
> >> > arch/arm/mach-shmobile/Makefile | 1
> >> > arch/arm/mach-shmobile/board-ape6evm.c | 46 ++++++++++++++++++++++++++++++++
> >> > 5 files changed, 81 insertions(+), 1 deletion(-)
> >> >
> >> > --- /dev/null
> >> > +++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 21:44:35.000000000 +0900
> >> > @@ -0,0 +1,26 @@
> >> > +/*
> >> > + * Device Tree Source for the APE6EVM board
> >> > + *
> >> > + * Copyright (C) 2013 Renesas Solutions Corp.
> >> > + *
> >> > + * This file is licensed under the terms of the GNU General Public License
> >> > + * version 2. This program is licensed "as is" without any warranty of any
> >> > + * kind, whether express or implied.
> >> > + */
> >> > +
> >> > +/dts-v1/;
> >> > +/include/ "r8a73a4.dtsi"
> >> > +
> >> > +/ {
> >> > + model = "APE6EVM";
> >> > + compatible = "renesas,ape6evm", "renesas,r8a73a4";
> >> > +
> >> > + chosen {
> >> > + bootargs = "console=ttySC0,115200 ignore_loglevel";
> >>
> >> I think that earlyprintk=sh-sci.0,11520 go in here.
> >
> > Also, to be consistent with the dts of other shmobile boards
> > could you add root=/dev/nfs ip=dhcp. This history behind this
> > is that many boards defaulted to using nfsroot in their defconfigs,
> > a reasonable default IMHO, and recently the command line for all
> > boards that boot using DT was moved from their defconfig
> > to their .dtsi in preparation for defconfig consolidation.
>
> Sounds like a good idea. Network is however not existing until pretty
> late in the series. How about adding it in that patch that includes
> SMSC ethernet support?
Yes, that sounds reasonable to me.
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
2013-03-20 12:50 ` Simon Horman
@ 2013-03-20 14:45 ` Magnus Damm
-1 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-20 14:45 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 20, 2013 at 9:50 PM, Simon Horman <horms@verge.net.au> wrote:
> On Tue, Mar 19, 2013 at 07:18:18PM +0900, Magnus Damm wrote:
>> On Tue, Mar 19, 2013 at 4:50 PM, Simon Horman <horms@verge.net.au> wrote:
>> > On Tue, Mar 19, 2013 at 04:25:33PM +0900, Simon Horman wrote:
>> >> On Tue, Mar 19, 2013 at 12:10:02AM +0900, Magnus Damm wrote:
>> >> > From: Magnus Damm <damm@opensource.se>
>> >> >
>> >> > V2 of APE6EVM base board support making use of
>> >> > 1 GiB of memory, the SCIFA0 serial port and
>> >> > ARM architected timer.
>> >> >
>> >> > Signed-off-by: Magnus Damm <damm@opensource.se>
>> >> > ---
>> >> >
>> >> > Changes since V1:
>> >> > - Sorted headers
>> >> > - Use ape6evm_add_standard_devices() to setup SoC devices and clocks
>> >> >
>> >> > Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
>> >> >
>> >> > Depends on the following series:
>> >> > [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
>> >> >
>> >> > Does not depend on:
>> >> > [PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
>> >> >
>> >> > arch/arm/boot/dts/Makefile | 1
>> >> > arch/arm/boot/dts/r8a73a4-ape6evm.dts | 26 ++++++++++++++++++
>> >> > arch/arm/mach-shmobile/Kconfig | 8 ++++-
>> >> > arch/arm/mach-shmobile/Makefile | 1
>> >> > arch/arm/mach-shmobile/board-ape6evm.c | 46 ++++++++++++++++++++++++++++++++
>> >> > 5 files changed, 81 insertions(+), 1 deletion(-)
>> >> >
>> >> > --- /dev/null
>> >> > +++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 21:44:35.000000000 +0900
>> >> > @@ -0,0 +1,26 @@
>> >> > +/*
>> >> > + * Device Tree Source for the APE6EVM board
>> >> > + *
>> >> > + * Copyright (C) 2013 Renesas Solutions Corp.
>> >> > + *
>> >> > + * This file is licensed under the terms of the GNU General Public License
>> >> > + * version 2. This program is licensed "as is" without any warranty of any
>> >> > + * kind, whether express or implied.
>> >> > + */
>> >> > +
>> >> > +/dts-v1/;
>> >> > +/include/ "r8a73a4.dtsi"
>> >> > +
>> >> > +/ {
>> >> > + model = "APE6EVM";
>> >> > + compatible = "renesas,ape6evm", "renesas,r8a73a4";
>> >> > +
>> >> > + chosen {
>> >> > + bootargs = "console=ttySC0,115200 ignore_loglevel";
>> >>
>> >> I think that earlyprintk=sh-sci.0,11520 go in here.
>> >
>> > Also, to be consistent with the dts of other shmobile boards
>> > could you add root=/dev/nfs ip=dhcp. This history behind this
>> > is that many boards defaulted to using nfsroot in their defconfigs,
>> > a reasonable default IMHO, and recently the command line for all
>> > boards that boot using DT was moved from their defconfig
>> > to their .dtsi in preparation for defconfig consolidation.
>>
>> Sounds like a good idea. Network is however not existing until pretty
>> late in the series. How about adding it in that patch that includes
>> SMSC ethernet support?
>
> Yes, that sounds reasonable to me.
Thanks. I will include that change in V3 together with a bug fix for
the SCIF ports. Also, if there is any suggestion about the the split
of platform device vs DT then I can also rework that portion of the
code. And yes, will need to update the PFC with PINCTRL support too.
Cheers,
/ magnus
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
@ 2013-03-20 14:45 ` Magnus Damm
0 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-20 14:45 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 20, 2013 at 9:50 PM, Simon Horman <horms@verge.net.au> wrote:
> On Tue, Mar 19, 2013 at 07:18:18PM +0900, Magnus Damm wrote:
>> On Tue, Mar 19, 2013 at 4:50 PM, Simon Horman <horms@verge.net.au> wrote:
>> > On Tue, Mar 19, 2013 at 04:25:33PM +0900, Simon Horman wrote:
>> >> On Tue, Mar 19, 2013 at 12:10:02AM +0900, Magnus Damm wrote:
>> >> > From: Magnus Damm <damm@opensource.se>
>> >> >
>> >> > V2 of APE6EVM base board support making use of
>> >> > 1 GiB of memory, the SCIFA0 serial port and
>> >> > ARM architected timer.
>> >> >
>> >> > Signed-off-by: Magnus Damm <damm@opensource.se>
>> >> > ---
>> >> >
>> >> > Changes since V1:
>> >> > - Sorted headers
>> >> > - Use ape6evm_add_standard_devices() to setup SoC devices and clocks
>> >> >
>> >> > Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
>> >> >
>> >> > Depends on the following series:
>> >> > [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
>> >> >
>> >> > Does not depend on:
>> >> > [PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
>> >> >
>> >> > arch/arm/boot/dts/Makefile | 1
>> >> > arch/arm/boot/dts/r8a73a4-ape6evm.dts | 26 ++++++++++++++++++
>> >> > arch/arm/mach-shmobile/Kconfig | 8 ++++-
>> >> > arch/arm/mach-shmobile/Makefile | 1
>> >> > arch/arm/mach-shmobile/board-ape6evm.c | 46 ++++++++++++++++++++++++++++++++
>> >> > 5 files changed, 81 insertions(+), 1 deletion(-)
>> >> >
>> >> > --- /dev/null
>> >> > +++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 21:44:35.000000000 +0900
>> >> > @@ -0,0 +1,26 @@
>> >> > +/*
>> >> > + * Device Tree Source for the APE6EVM board
>> >> > + *
>> >> > + * Copyright (C) 2013 Renesas Solutions Corp.
>> >> > + *
>> >> > + * This file is licensed under the terms of the GNU General Public License
>> >> > + * version 2. This program is licensed "as is" without any warranty of any
>> >> > + * kind, whether express or implied.
>> >> > + */
>> >> > +
>> >> > +/dts-v1/;
>> >> > +/include/ "r8a73a4.dtsi"
>> >> > +
>> >> > +/ {
>> >> > + model = "APE6EVM";
>> >> > + compatible = "renesas,ape6evm", "renesas,r8a73a4";
>> >> > +
>> >> > + chosen {
>> >> > + bootargs = "console=ttySC0,115200 ignore_loglevel";
>> >>
>> >> I think that earlyprintk=sh-sci.0,11520 go in here.
>> >
>> > Also, to be consistent with the dts of other shmobile boards
>> > could you add root=/dev/nfs ip=dhcp. This history behind this
>> > is that many boards defaulted to using nfsroot in their defconfigs,
>> > a reasonable default IMHO, and recently the command line for all
>> > boards that boot using DT was moved from their defconfig
>> > to their .dtsi in preparation for defconfig consolidation.
>>
>> Sounds like a good idea. Network is however not existing until pretty
>> late in the series. How about adding it in that patch that includes
>> SMSC ethernet support?
>
> Yes, that sounds reasonable to me.
Thanks. I will include that change in V3 together with a bug fix for
the SCIF ports. Also, if there is any suggestion about the the split
of platform device vs DT then I can also rework that portion of the
code. And yes, will need to update the PFC with PINCTRL support too.
Cheers,
/ magnus
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
2013-03-19 7:25 ` Simon Horman
@ 2013-03-19 10:15 ` Magnus Damm
-1 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-19 10:15 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 19, 2013 at 4:25 PM, Simon Horman <horms@verge.net.au> wrote:
> On Tue, Mar 19, 2013 at 12:10:02AM +0900, Magnus Damm wrote:
>> From: Magnus Damm <damm@opensource.se>
>>
>> V2 of APE6EVM base board support making use of
>> 1 GiB of memory, the SCIFA0 serial port and
>> ARM architected timer.
>>
>> Signed-off-by: Magnus Damm <damm@opensource.se>
>> ---
>>
>> Changes since V1:
>> - Sorted headers
>> - Use ape6evm_add_standard_devices() to setup SoC devices and clocks
>>
>> Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
>>
>> Depends on the following series:
>> [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
>>
>> Does not depend on:
>> [PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
>>
>> arch/arm/boot/dts/Makefile | 1
>> arch/arm/boot/dts/r8a73a4-ape6evm.dts | 26 ++++++++++++++++++
>> arch/arm/mach-shmobile/Kconfig | 8 ++++-
>> arch/arm/mach-shmobile/Makefile | 1
>> arch/arm/mach-shmobile/board-ape6evm.c | 46 ++++++++++++++++++++++++++++++++
>> 5 files changed, 81 insertions(+), 1 deletion(-)
>>
>> --- 0001/arch/arm/boot/dts/Makefile
>> +++ work/arch/arm/boot/dts/Makefile 2013-03-18 21:44:34.000000000 +0900
>> @@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm
>> r8a7779-marzen-reference.dtb \
>> sh73a0-kzm9g.dtb \
>> sh73a0-kzm9g-reference.dtb \
>> + r8a73a4-ape6evm.dtb \
>> sh7372-mackerel.dtb
>> dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
>> socfpga_vt.dtb
>> --- /dev/null
>> +++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 21:44:35.000000000 +0900
>> @@ -0,0 +1,26 @@
>> +/*
>> + * Device Tree Source for the APE6EVM board
>> + *
>> + * Copyright (C) 2013 Renesas Solutions Corp.
>> + *
>> + * This file is licensed under the terms of the GNU General Public License
>> + * version 2. This program is licensed "as is" without any warranty of any
>> + * kind, whether express or implied.
>> + */
>> +
>> +/dts-v1/;
>> +/include/ "r8a73a4.dtsi"
>> +
>> +/ {
>> + model = "APE6EVM";
>> + compatible = "renesas,ape6evm", "renesas,r8a73a4";
>> +
>> + chosen {
>> + bootargs = "console=ttySC0,115200 ignore_loglevel";
>
> I think that earlyprintk=sh-sci.0,11520 go in here.
Thanks for checking, but we're not making use of earlyprintk on
r8a73a4. So adding this parameter will not make any difference, just
potential confusion IMO.
On r8a73a4 the SCIF ports are added as regular device drivers at
->init_machine() timing. With this approach transition to DT in the
future will be just a small step.
Thanks,
/ magnus
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
@ 2013-03-19 10:15 ` Magnus Damm
0 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-19 10:15 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 19, 2013 at 4:25 PM, Simon Horman <horms@verge.net.au> wrote:
> On Tue, Mar 19, 2013 at 12:10:02AM +0900, Magnus Damm wrote:
>> From: Magnus Damm <damm@opensource.se>
>>
>> V2 of APE6EVM base board support making use of
>> 1 GiB of memory, the SCIFA0 serial port and
>> ARM architected timer.
>>
>> Signed-off-by: Magnus Damm <damm@opensource.se>
>> ---
>>
>> Changes since V1:
>> - Sorted headers
>> - Use ape6evm_add_standard_devices() to setup SoC devices and clocks
>>
>> Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
>>
>> Depends on the following series:
>> [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
>>
>> Does not depend on:
>> [PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
>>
>> arch/arm/boot/dts/Makefile | 1
>> arch/arm/boot/dts/r8a73a4-ape6evm.dts | 26 ++++++++++++++++++
>> arch/arm/mach-shmobile/Kconfig | 8 ++++-
>> arch/arm/mach-shmobile/Makefile | 1
>> arch/arm/mach-shmobile/board-ape6evm.c | 46 ++++++++++++++++++++++++++++++++
>> 5 files changed, 81 insertions(+), 1 deletion(-)
>>
>> --- 0001/arch/arm/boot/dts/Makefile
>> +++ work/arch/arm/boot/dts/Makefile 2013-03-18 21:44:34.000000000 +0900
>> @@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm
>> r8a7779-marzen-reference.dtb \
>> sh73a0-kzm9g.dtb \
>> sh73a0-kzm9g-reference.dtb \
>> + r8a73a4-ape6evm.dtb \
>> sh7372-mackerel.dtb
>> dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
>> socfpga_vt.dtb
>> --- /dev/null
>> +++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 21:44:35.000000000 +0900
>> @@ -0,0 +1,26 @@
>> +/*
>> + * Device Tree Source for the APE6EVM board
>> + *
>> + * Copyright (C) 2013 Renesas Solutions Corp.
>> + *
>> + * This file is licensed under the terms of the GNU General Public License
>> + * version 2. This program is licensed "as is" without any warranty of any
>> + * kind, whether express or implied.
>> + */
>> +
>> +/dts-v1/;
>> +/include/ "r8a73a4.dtsi"
>> +
>> +/ {
>> + model = "APE6EVM";
>> + compatible = "renesas,ape6evm", "renesas,r8a73a4";
>> +
>> + chosen {
>> + bootargs = "console=ttySC0,115200 ignore_loglevel";
>
> I think that earlyprintk=sh-sci.0,11520 go in here.
Thanks for checking, but we're not making use of earlyprintk on
r8a73a4. So adding this parameter will not make any difference, just
potential confusion IMO.
On r8a73a4 the SCIF ports are added as regular device drivers at
->init_machine() timing. With this approach transition to DT in the
future will be just a small step.
Thanks,
/ magnus
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
2013-03-19 10:15 ` Magnus Damm
@ 2013-03-20 12:50 ` Simon Horman
-1 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2013-03-20 12:50 UTC (permalink / raw)
To: linux-arm-kernel
Hi Magnus,
On Tue, Mar 19, 2013 at 07:15:22PM +0900, Magnus Damm wrote:
> On Tue, Mar 19, 2013 at 4:25 PM, Simon Horman <horms@verge.net.au> wrote:
> > On Tue, Mar 19, 2013 at 12:10:02AM +0900, Magnus Damm wrote:
> >> From: Magnus Damm <damm@opensource.se>
> >>
> >> V2 of APE6EVM base board support making use of
> >> 1 GiB of memory, the SCIFA0 serial port and
> >> ARM architected timer.
> >>
> >> Signed-off-by: Magnus Damm <damm@opensource.se>
> >> ---
> >>
> >> Changes since V1:
> >> - Sorted headers
> >> - Use ape6evm_add_standard_devices() to setup SoC devices and clocks
> >>
> >> Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
> >>
> >> Depends on the following series:
> >> [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
> >>
> >> Does not depend on:
> >> [PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
> >>
> >> arch/arm/boot/dts/Makefile | 1
> >> arch/arm/boot/dts/r8a73a4-ape6evm.dts | 26 ++++++++++++++++++
> >> arch/arm/mach-shmobile/Kconfig | 8 ++++-
> >> arch/arm/mach-shmobile/Makefile | 1
> >> arch/arm/mach-shmobile/board-ape6evm.c | 46 ++++++++++++++++++++++++++++++++
> >> 5 files changed, 81 insertions(+), 1 deletion(-)
> >>
> >> --- 0001/arch/arm/boot/dts/Makefile
> >> +++ work/arch/arm/boot/dts/Makefile 2013-03-18 21:44:34.000000000 +0900
> >> @@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm
> >> r8a7779-marzen-reference.dtb \
> >> sh73a0-kzm9g.dtb \
> >> sh73a0-kzm9g-reference.dtb \
> >> + r8a73a4-ape6evm.dtb \
> >> sh7372-mackerel.dtb
> >> dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
> >> socfpga_vt.dtb
> >> --- /dev/null
> >> +++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 21:44:35.000000000 +0900
> >> @@ -0,0 +1,26 @@
> >> +/*
> >> + * Device Tree Source for the APE6EVM board
> >> + *
> >> + * Copyright (C) 2013 Renesas Solutions Corp.
> >> + *
> >> + * This file is licensed under the terms of the GNU General Public License
> >> + * version 2. This program is licensed "as is" without any warranty of any
> >> + * kind, whether express or implied.
> >> + */
> >> +
> >> +/dts-v1/;
> >> +/include/ "r8a73a4.dtsi"
> >> +
> >> +/ {
> >> + model = "APE6EVM";
> >> + compatible = "renesas,ape6evm", "renesas,r8a73a4";
> >> +
> >> + chosen {
> >> + bootargs = "console=ttySC0,115200 ignore_loglevel";
> >
> > I think that earlyprintk=sh-sci.0,11520 go in here.
>
> Thanks for checking, but we're not making use of earlyprintk on
> r8a73a4. So adding this parameter will not make any difference, just
> potential confusion IMO.
>
> On r8a73a4 the SCIF ports are added as regular device drivers at
> ->init_machine() timing. With this approach transition to DT in the
> future will be just a small step.
Thanks for the clarification.
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
@ 2013-03-20 12:50 ` Simon Horman
0 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2013-03-20 12:50 UTC (permalink / raw)
To: linux-arm-kernel
Hi Magnus,
On Tue, Mar 19, 2013 at 07:15:22PM +0900, Magnus Damm wrote:
> On Tue, Mar 19, 2013 at 4:25 PM, Simon Horman <horms@verge.net.au> wrote:
> > On Tue, Mar 19, 2013 at 12:10:02AM +0900, Magnus Damm wrote:
> >> From: Magnus Damm <damm@opensource.se>
> >>
> >> V2 of APE6EVM base board support making use of
> >> 1 GiB of memory, the SCIFA0 serial port and
> >> ARM architected timer.
> >>
> >> Signed-off-by: Magnus Damm <damm@opensource.se>
> >> ---
> >>
> >> Changes since V1:
> >> - Sorted headers
> >> - Use ape6evm_add_standard_devices() to setup SoC devices and clocks
> >>
> >> Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
> >>
> >> Depends on the following series:
> >> [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
> >>
> >> Does not depend on:
> >> [PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
> >>
> >> arch/arm/boot/dts/Makefile | 1
> >> arch/arm/boot/dts/r8a73a4-ape6evm.dts | 26 ++++++++++++++++++
> >> arch/arm/mach-shmobile/Kconfig | 8 ++++-
> >> arch/arm/mach-shmobile/Makefile | 1
> >> arch/arm/mach-shmobile/board-ape6evm.c | 46 ++++++++++++++++++++++++++++++++
> >> 5 files changed, 81 insertions(+), 1 deletion(-)
> >>
> >> --- 0001/arch/arm/boot/dts/Makefile
> >> +++ work/arch/arm/boot/dts/Makefile 2013-03-18 21:44:34.000000000 +0900
> >> @@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm
> >> r8a7779-marzen-reference.dtb \
> >> sh73a0-kzm9g.dtb \
> >> sh73a0-kzm9g-reference.dtb \
> >> + r8a73a4-ape6evm.dtb \
> >> sh7372-mackerel.dtb
> >> dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
> >> socfpga_vt.dtb
> >> --- /dev/null
> >> +++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 21:44:35.000000000 +0900
> >> @@ -0,0 +1,26 @@
> >> +/*
> >> + * Device Tree Source for the APE6EVM board
> >> + *
> >> + * Copyright (C) 2013 Renesas Solutions Corp.
> >> + *
> >> + * This file is licensed under the terms of the GNU General Public License
> >> + * version 2. This program is licensed "as is" without any warranty of any
> >> + * kind, whether express or implied.
> >> + */
> >> +
> >> +/dts-v1/;
> >> +/include/ "r8a73a4.dtsi"
> >> +
> >> +/ {
> >> + model = "APE6EVM";
> >> + compatible = "renesas,ape6evm", "renesas,r8a73a4";
> >> +
> >> + chosen {
> >> + bootargs = "console=ttySC0,115200 ignore_loglevel";
> >
> > I think that earlyprintk=sh-sci.0,11520 go in here.
>
> Thanks for checking, but we're not making use of earlyprintk on
> r8a73a4. So adding this parameter will not make any difference, just
> potential confusion IMO.
>
> On r8a73a4 the SCIF ports are added as regular device drivers at
> ->init_machine() timing. With this approach transition to DT in the
> future will be just a small step.
Thanks for the clarification.
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 02/03] ARM: shmobile: APE6EVM PFC support
2013-03-18 15:09 ` Magnus Damm
@ 2013-03-18 15:10 ` Magnus Damm
-1 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-18 15:10 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm@opensource.se>
Start using the r8a73a4 PFC on the APE6EVM board
and configure the SCIFA0 console signals using
the PFC.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
Depends on the following two series:
[PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
[PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
arch/arm/mach-shmobile/Kconfig | 1 +
arch/arm/mach-shmobile/board-ape6evm.c | 7 +++++++
2 files changed, 8 insertions(+)
--- 0009/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2013-03-18 22:12:56.000000000 +0900
@@ -82,6 +82,7 @@ config MACH_AG5EVM
config MACH_APE6EVM
bool "APE6EVM board"
depends on ARCH_R8A73A4
+ select ARCH_REQUIRE_GPIOLIB
select USE_OF
config MACH_MACKEREL
--- 0009/arch/arm/mach-shmobile/board-ape6evm.c
+++ work/arch/arm/mach-shmobile/board-ape6evm.c 2013-03-18 22:05:03.000000000 +0900
@@ -18,6 +18,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/irqchip.h>
#include <linux/kernel.h>
@@ -30,6 +31,12 @@
static void __init ape6evm_add_standard_devices(void)
{
r8a73a4_clock_init();
+ r8a73a4_pinmux_init();
+
+ /* SCIFA0 console */
+ gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
+ gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
+
r8a73a4_add_standard_devices();
}
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 02/03] ARM: shmobile: APE6EVM PFC support
@ 2013-03-18 15:10 ` Magnus Damm
0 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-18 15:10 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm@opensource.se>
Start using the r8a73a4 PFC on the APE6EVM board
and configure the SCIFA0 console signals using
the PFC.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
Depends on the following two series:
[PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
[PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
arch/arm/mach-shmobile/Kconfig | 1 +
arch/arm/mach-shmobile/board-ape6evm.c | 7 +++++++
2 files changed, 8 insertions(+)
--- 0009/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2013-03-18 22:12:56.000000000 +0900
@@ -82,6 +82,7 @@ config MACH_AG5EVM
config MACH_APE6EVM
bool "APE6EVM board"
depends on ARCH_R8A73A4
+ select ARCH_REQUIRE_GPIOLIB
select USE_OF
config MACH_MACKEREL
--- 0009/arch/arm/mach-shmobile/board-ape6evm.c
+++ work/arch/arm/mach-shmobile/board-ape6evm.c 2013-03-18 22:05:03.000000000 +0900
@@ -18,6 +18,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/irqchip.h>
#include <linux/kernel.h>
@@ -30,6 +31,12 @@
static void __init ape6evm_add_standard_devices(void)
{
r8a73a4_clock_init();
+ r8a73a4_pinmux_init();
+
+ /* SCIFA0 console */
+ gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
+ gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
+
r8a73a4_add_standard_devices();
}
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 03/03] ARM: shmobile: APE6EVM LAN9220 support
2013-03-18 15:09 ` Magnus Damm
@ 2013-03-18 15:10 ` Magnus Damm
-1 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-18 15:10 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm@opensource.se>
Add LAN9220 support to the APE6EVM board using C and DT.
At this point the PFC lacks DT bindings so to configure
the pinmux we need to use C.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
Depends on the following two series:
[PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
[PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 21 ++++++++++++++++++
arch/arm/mach-shmobile/Kconfig | 1
arch/arm/mach-shmobile/board-ape6evm.c | 36 ++++++++++++++++++++++++++++++++
3 files changed, 58 insertions(+)
--- 0009/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 22:13:31.000000000 +0900
@@ -23,4 +23,25 @@
device_type = "memory";
reg = <0x40000000 0x40000000>;
};
+
+ ape6evm_fixed_3v3: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ethernet@8000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <0x08000000 0x1000>;
+ interrupt-parent = <&irqc1>;
+ interrupts = <8 0x4>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vdd33a-supply = <&ape6evm_fixed_3v3>;
+ vddvario-supply = <&ape6evm_fixed_3v3>;
+ };
};
--- 0010/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2013-03-18 22:13:44.000000000 +0900
@@ -83,6 +83,7 @@ config MACH_APE6EVM
bool "APE6EVM board"
depends on ARCH_R8A73A4
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
config MACH_MACKEREL
--- 0010/arch/arm/mach-shmobile/board-ape6evm.c
+++ work/arch/arm/mach-shmobile/board-ape6evm.c 2013-03-18 22:13:31.000000000 +0900
@@ -23,11 +23,36 @@
#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
#include <mach/common.h>
+#include <mach/irqs.h>
#include <mach/r8a73a4.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+/* SMSC LAN9220 */
+static const struct resource lan9220_res[] = {
+ DEFINE_RES_MEM(0x08000000, 0x1000),
+ {
+ .start = irq_pin(40), /* IRQ40 */
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+ },
+};
+
+static const struct smsc911x_platform_config lan9220_data = {
+ .flags = SMSC911X_USE_32BIT,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+};
+
static void __init ape6evm_add_standard_devices(void)
{
r8a73a4_clock_init();
@@ -38,6 +63,17 @@ static void __init ape6evm_add_standard_
gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
r8a73a4_add_standard_devices();
+
+ /* LAN9220 ethernet */
+ gpio_request(GPIO_FN_IRQ40, NULL); /* smsc9220 IRQ */
+ gpio_request(GPIO_PORT270, NULL); /* smsc9220 RESET */
+ gpio_direction_output(GPIO_PORT270, 1);
+
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+ platform_device_register_resndata(&platform_bus, "smsc911x", -1,
+ lan9220_res, ARRAY_SIZE(lan9220_res),
+ &lan9220_data, sizeof(lan9220_data));
}
static const char *ape6evm_boards_compat_dt[] __initdata = {
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 03/03] ARM: shmobile: APE6EVM LAN9220 support
@ 2013-03-18 15:10 ` Magnus Damm
0 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-18 15:10 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm@opensource.se>
Add LAN9220 support to the APE6EVM board using C and DT.
At this point the PFC lacks DT bindings so to configure
the pinmux we need to use C.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615
Depends on the following two series:
[PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
[PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 21 ++++++++++++++++++
arch/arm/mach-shmobile/Kconfig | 1
arch/arm/mach-shmobile/board-ape6evm.c | 36 ++++++++++++++++++++++++++++++++
3 files changed, 58 insertions(+)
--- 0009/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ work/arch/arm/boot/dts/r8a73a4-ape6evm.dts 2013-03-18 22:13:31.000000000 +0900
@@ -23,4 +23,25 @@
device_type = "memory";
reg = <0x40000000 0x40000000>;
};
+
+ ape6evm_fixed_3v3: fixedregulator at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ethernet at 8000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <0x08000000 0x1000>;
+ interrupt-parent = <&irqc1>;
+ interrupts = <8 0x4>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vdd33a-supply = <&ape6evm_fixed_3v3>;
+ vddvario-supply = <&ape6evm_fixed_3v3>;
+ };
};
--- 0010/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2013-03-18 22:13:44.000000000 +0900
@@ -83,6 +83,7 @@ config MACH_APE6EVM
bool "APE6EVM board"
depends on ARCH_R8A73A4
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
config MACH_MACKEREL
--- 0010/arch/arm/mach-shmobile/board-ape6evm.c
+++ work/arch/arm/mach-shmobile/board-ape6evm.c 2013-03-18 22:13:31.000000000 +0900
@@ -23,11 +23,36 @@
#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
#include <mach/common.h>
+#include <mach/irqs.h>
#include <mach/r8a73a4.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+/* SMSC LAN9220 */
+static const struct resource lan9220_res[] = {
+ DEFINE_RES_MEM(0x08000000, 0x1000),
+ {
+ .start = irq_pin(40), /* IRQ40 */
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+ },
+};
+
+static const struct smsc911x_platform_config lan9220_data = {
+ .flags = SMSC911X_USE_32BIT,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+};
+
static void __init ape6evm_add_standard_devices(void)
{
r8a73a4_clock_init();
@@ -38,6 +63,17 @@ static void __init ape6evm_add_standard_
gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
r8a73a4_add_standard_devices();
+
+ /* LAN9220 ethernet */
+ gpio_request(GPIO_FN_IRQ40, NULL); /* smsc9220 IRQ */
+ gpio_request(GPIO_PORT270, NULL); /* smsc9220 RESET */
+ gpio_direction_output(GPIO_PORT270, 1);
+
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+ platform_device_register_resndata(&platform_bus, "smsc911x", -1,
+ lan9220_res, ARRAY_SIZE(lan9220_res),
+ &lan9220_data, sizeof(lan9220_data));
}
static const char *ape6evm_boards_compat_dt[] __initdata = {
^ permalink raw reply [flat|nested] 22+ messages in thread