* soundcard (dma) stopped working with commit 27c2127 (x86/amd-iommu: Use only per-device dma_ops)
@ 2013-03-26 7:37 Andreas Degert
[not found] ` <CAHccUrL2_JLMyYzzBYUdUGy0VVRRk90u9_MyknPKcRJpr_ZDfQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 10+ messages in thread
From: Andreas Degert @ 2013-03-26 7:37 UTC (permalink / raw)
To: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
[-- Attachment #1: Type: text/plain, Size: 1625 bytes --]
Does anyone have some advice for further debugging?
soundcard: cardbus card, via pci adapter card
driver: snd_hdsp, yenta_cardbus
cpu: AMD A10-5700
Further information can be found in appended output of lspci -vv and
/proc/cpuinfo.
The device is detected and can be configured, but after that commit it
just produces
silence (playback / recording, both using dma). No change in dmesg output, apart
from the additional 3-line block about PCI-DMA using SWIOTLB (the appended
dmesg output is for 3.8.4-rt1, the rt patch makes no difference).
As a shot into the dark I tried following hack, which seems to work (for me...):
--------------------------------------------------------------------------------
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -3169,6 +3169,7 @@ int __init amd_iommu_init_dma_ops(void)
swiotlb = 0;
/* Make the driver finally visible to the drivers */
+ dma_ops = &amd_iommu_dma_ops;
unhandled = device_dma_ops_init();
if (unhandled && max_pfn > MAX_DMA32_PFN) {
/* There are unhandled devices - initialize swiotlb for them */
--------------------------------------------------------------------------------
The soundcard device is not in the initial list of pci devices handled
by amd_iommu_init_dma_ops(). Later on device_change_notifier() is
called for that device with BUS_NOTIFY_ADD_DEVICE, but the
protection domain is already set, so dev->archdata.dma_ops is
not set in that call (result of some printk-debugging).
I'm lost here since I not familiar with the kernel code.. any advice
appreciated.
regards
Andreas
[-- Attachment #2: lspci_vv.txt --]
[-- Type: text/plain, Size: 31508 bytes --]
00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
Subsystem: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.2 IOMMU: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit
Subsystem: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Capabilities: [40] Secure device <?>
Capabilities: [54] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4181
Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Trinity [Radeon HD 7660D] (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 54
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at f000 [size=256]
Region 2: Memory at feb00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00000 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: radeon
00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Trinity HDMI Audio Controller
Subsystem: Micro-Star International Co., Ltd. Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 53
Region 0: Memory at feb44000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00000 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: snd_hda_intel
00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Port (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [b0] Subsystem: Micro-Star International Co., Ltd. Device 7721
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport
00:05.0 PCI bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Port (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [b0] Subsystem: Micro-Star International Co., Ltd. Device 7721
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport
00:10.0 USB controller: Advanced Micro Devices [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7721
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb4a000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
Vector table: BAR=0 offset=00001000
PBA: BAR=0 offset=00001080
Capabilities: [a0] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Latency Tolerance Reporting
Max snoop latency: 0ns
Max no snoop latency: 0ns
Kernel driver in use: xhci_hcd
00:10.1 USB controller: Advanced Micro Devices [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7721
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb48000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
Vector table: BAR=0 offset=00001000
PBA: BAR=0 offset=00001080
Capabilities: [a0] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Kernel driver in use: xhci_hcd
00:11.0 SATA controller: Advanced Micro Devices [AMD] FCH SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 47
Region 0: I/O ports at f140 [size=8]
Region 1: I/O ports at f130 [size=4]
Region 2: I/O ports at f120 [size=8]
Region 3: I/O ports at f110 [size=4]
Region 4: I/O ports at f100 [size=16]
Region 5: Memory at feb51000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee00000 Data: 0000
Capabilities: [70] SATA HBA v1.0 InCfgSpace
Kernel driver in use: ahci
00:12.0 USB controller: Advanced Micro Devices [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb50000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller: Advanced Micro Devices [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb4f000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
00:13.0 USB controller: Advanced Micro Devices [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb4e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller: Advanced Micro Devices [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb4d000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
00:14.0 SMBus: Advanced Micro Devices [AMD] FCH SMBus Controller (rev 14)
Subsystem: Micro-Star International Co., Ltd. Device 7721
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.2 Audio device: Advanced Micro Devices [AMD] FCH Azalia Controller (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device d721
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices [AMD] FCH LPC Bridge (rev 11)
Subsystem: Micro-Star International Co., Ltd. Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge: Advanced Micro Devices [AMD] FCH PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=07, sec-latency=64
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: fd400000-fe8fffff
Prefetchable memory behind bridge: d0000000-d13fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller: Advanced Micro Devices [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at feb4c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 2
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 3
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 4
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 5
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: Micro-Star International Co., Ltd. Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at fea04000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fea00000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
No end tag found
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
02:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Atheros Communications Inc. Device 30a4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-15-17-ff-ff-24-14-12
Capabilities: [170 v1] Power Budgeting <?>
Kernel driver in use: ath9k
03:05.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 81)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fe800000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: d4000000-d7ffffff (prefetchable)
Memory window 1: d8000000-dbffffff
I/O window 0: 0000c000-0000c0ff
I/O window 1: 0000c400-0000c4ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
04:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP (rev 35)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 255
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=64K]
Kernel driver in use: snd_hdsp
[-- Attachment #3: cpuinfo.txt --]
[-- Type: text/plain, Size: 4465 bytes --]
processor : 0
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A10-5700 APU with Radeon(tm) HD Graphics
stepping : 1
microcode : 0x6001119
cpu MHz : 1400.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 16
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1
bogomips : 6784.96
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro
processor : 1
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A10-5700 APU with Radeon(tm) HD Graphics
stepping : 1
microcode : 0x6001119
cpu MHz : 1400.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 17
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1
bogomips : 6784.96
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro
processor : 2
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A10-5700 APU with Radeon(tm) HD Graphics
stepping : 1
microcode : 0x6001119
cpu MHz : 1400.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 2
apicid : 18
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1
bogomips : 6784.96
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro
processor : 3
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A10-5700 APU with Radeon(tm) HD Graphics
stepping : 1
microcode : 0x6001119
cpu MHz : 1400.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 2
apicid : 19
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1
bogomips : 6784.96
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro
[-- Attachment #4: dmesg.txt --]
[-- Type: text/plain, Size: 58482 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.4-rt1 (root@phonus) (gcc version 4.7.2 (Debian 4.7.2-5) ) #4 SMP PREEMPT RT Mon Mar 25 19:35:48 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.4-rt1 root=UUID=6777b7d9-06b6-4cc8-9bdb-105e3cec9c26 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d85cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d85d000-0x000000009db3cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009db3d000-0x000000009ddfcfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ddfd000-0x000000009dea0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009dea1000-0x000000009ea49fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ea4a000-0x000000009ea4afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ea4b000-0x000000009ec50fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009ec51000-0x000000009f072fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f073000-0x000000009f7f3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f7f4000-0x000000009f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: MSI MS-7721/FM2-A75MA-E35 (MS-7721), BIOS V1.7 01/29/2013
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 00009F800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0x9f800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x9f7fffff]
[ 0.000000] [mem 0x00000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9f7fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x9f7fffff @ [mem 0x1fffe000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x23effffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
[ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
[ 0.000000] [mem 0x200000000-0x23effffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x23effffff @ [mem 0x9f7fc000-0x9f7fffff]
[ 0.000000] RAMDISK: [mem 0x36aa4000-0x37549fff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 000000009de8e078 0006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 000000009de94320 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)
[ 0.000000] ACPI: DSDT 000000009de8e178 061A4 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 000000009de96080 00040
[ 0.000000] ACPI: APIC 000000009de94430 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 000000009de944a8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 000000009de944f0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 000000009de94530 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 000000009de94568 00D40 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 000000009de952a8 004B7 (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: IVRS 000000009de95760 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
[ 0.000000] ACPI: CRAT 000000009de957d0 002F8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23effffff]
[ 0.000000] NODE_DATA [mem 0x23effb000-0x23effffff]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880236e00000-ffff88023d7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x9d85cfff]
[ 0.000000] node 0: [mem 0x9db3d000-0x9ddfcfff]
[ 0.000000] node 0: [mem 0x9ea4a000-0x9ea4afff]
[ 0.000000] node 0: [mem 0x9ec51000-0x9f072fff]
[ 0.000000] node 0: [mem 0x9f7f4000-0x9f7fffff]
[ 0.000000] node 0: [mem 0x100001000-0x23effffff]
[ 0.000000] On node 0 totalpages: 1953497
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8790 pages used for memmap
[ 0.000000] DMA32 zone: 634102 pages, LIFO batch:31
[ 0.000000] Normal zone: 17864 pages used for memmap
[ 0.000000] Normal zone: 1288759 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009d85d000 - 000000009db3d000
[ 0.000000] PM: Registered nosave memory: 000000009ddfd000 - 000000009dea1000
[ 0.000000] PM: Registered nosave memory: 000000009dea1000 - 000000009ea4a000
[ 0.000000] PM: Registered nosave memory: 000000009ea4b000 - 000000009ec51000
[ 0.000000] PM: Registered nosave memory: 000000009f073000 - 000000009f7f4000
[ 0.000000] PM: Registered nosave memory: 000000009f800000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[ 0.000000] e820: [mem 0x9f800000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 107 pages/cpu @ffff88023ec00000 s407232 r8192 d22848 u524288
[ 0.000000] pcpu-alloc: s407232 r8192 d22848 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1926781
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.4-rt1 root=UUID=6777b7d9-06b6-4cc8-9bdb-105e3cec9c26 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 94000000
[ 0.000000] PM: Registered nosave memory: 0000000094000000 - 0000000098000000
[ 0.000000] Memory: 7551812k/9420800k available (3659k kernel code, 1606812k absent, 262176k reserved, 3104k data, 944k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3392.484 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.96 BogoMIPS (lpj=13569936)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000035] Security Framework initialized
[ 0.000037] AppArmor: AppArmor disabled by boot time parameter
[ 0.000576] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002604] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003511] Mount-cache hash table entries: 256
[ 0.003659] Initializing cgroup subsys cpuacct
[ 0.003660] Initializing cgroup subsys devices
[ 0.003661] Initializing cgroup subsys freezer
[ 0.003662] Initializing cgroup subsys net_cls
[ 0.003663] Initializing cgroup subsys blkio
[ 0.003663] Initializing cgroup subsys perf_event
[ 0.003688] tseg: 009f800000
[ 0.003689] CPU: Physical Processor ID: 0
[ 0.003689] CPU: Processor Core ID: 0
[ 0.003690] mce: CPU supports 7 MCE banks
[ 0.003701] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.003701] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.003701] tlb_flushall_shift: 5
[ 0.003765] Freeing SMP alternatives: 8k freed
[ 0.003962] ACPI: Core revision 20121018
[ 0.102504] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.142082] smpboot: CPU0: AMD A10-5700 APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
[ 0.246364] Performance Events:
[ 0.246364] perf: AMD core performance counters detected
[ 0.246367] AMD PMU driver.
[ 0.246370] ... version: 0
[ 0.246371] ... bit width: 48
[ 0.246372] ... generic registers: 6
[ 0.246373] ... value mask: 0000ffffffffffff
[ 0.246374] ... max period: 00007fffffffffff
[ 0.246375] ... fixed-purpose events: 0
[ 0.246376] ... event mask: 000000000000003f
[ 0.278506] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.294488] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.363354] Brought up 4 CPUs
[ 0.363357] smpboot: Total of 4 processors activated (27139.87 BogoMIPS)
[ 0.364304] devtmpfs: initialized
[ 0.367092] PM: Registering ACPI NVS region [mem 0x9ddfd000-0x9dea0fff] (671744 bytes)
[ 0.367138] PM: Registering ACPI NVS region [mem 0x9ea4b000-0x9ec50fff] (2121728 bytes)
[ 0.367411] regulator-dummy: no parameters
[ 0.367487] NET: Registered protocol family 16
[ 0.367733] ACPI: bus type pci registered
[ 0.367802] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.367804] PCI: not using MMCONFIG
[ 0.367806] PCI: Using configuration type 1 for base access
[ 0.367807] PCI: Using configuration type 1 for extended access
[ 0.368950] bio: create slab <bio-0> at 0
[ 0.369063] ACPI: Added _OSI(Module Device)
[ 0.369065] ACPI: Added _OSI(Processor Device)
[ 0.369069] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.369071] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.370017] ACPI: EC: Look up EC in DSDT
[ 0.371235] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.378757] ACPI: Interpreter enabled
[ 0.378760] ACPI: (supports S0 S3 S4 S5)
[ 0.378789] ACPI: Using IOAPIC for interrupt routing
[ 0.378987] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.379043] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.421762] ACPI: No dock devices found.
[ 0.421768] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.422102] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.422105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.422948] pci_root PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[ 0.423292] pci_root PNP0A03:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.423790] PCI host bridge to bus 0000:00
[ 0.423793] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.423795] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.423798] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.423800] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.423802] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.423804] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.423806] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.423809] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.423816] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.423847] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
[ 0.423902] pci 0000:00:01.0: [1002:9901] type 00 class 0x030000
[ 0.423909] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.423914] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
[ 0.423919] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.423952] pci 0000:00:01.0: supports D1 D2
[ 0.423966] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.423973] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
[ 0.424011] pci 0000:00:01.1: supports D1 D2
[ 0.424033] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 0.424070] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.424087] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[ 0.424124] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.424164] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[ 0.424189] pci 0000:00:10.0: reg 10: [mem 0xfeb4a000-0xfeb4bfff 64bit]
[ 0.424276] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.424314] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
[ 0.424331] pci 0000:00:10.1: reg 10: [mem 0xfeb48000-0xfeb49fff 64bit]
[ 0.424419] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.424453] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.424468] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
[ 0.424476] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
[ 0.424484] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
[ 0.424491] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
[ 0.424499] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
[ 0.424507] pci 0000:00:11.0: reg 24: [mem 0xfeb51000-0xfeb517ff]
[ 0.424555] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.424566] pci 0000:00:12.0: reg 10: [mem 0xfeb50000-0xfeb50fff]
[ 0.424625] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.424640] pci 0000:00:12.2: reg 10: [mem 0xfeb4f000-0xfeb4f0ff]
[ 0.424705] pci 0000:00:12.2: supports D1 D2
[ 0.424707] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.424728] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.424738] pci 0000:00:13.0: reg 10: [mem 0xfeb4e000-0xfeb4efff]
[ 0.424797] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.424812] pci 0000:00:13.2: reg 10: [mem 0xfeb4d000-0xfeb4d0ff]
[ 0.424877] pci 0000:00:13.2: supports D1 D2
[ 0.424879] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.424899] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.424962] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.424979] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.425031] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.425045] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.425108] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.425143] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 0.425154] pci 0000:00:14.5: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
[ 0.425210] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.425227] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.425243] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.425259] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.425279] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.425294] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.425352] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.425364] pci 0000:01:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.425384] pci 0000:01:00.0: reg 18: [mem 0xfea04000-0xfea04fff 64bit pref]
[ 0.425396] pci 0000:01:00.0: reg 20: [mem 0xfea00000-0xfea03fff 64bit pref]
[ 0.425449] pci 0000:01:00.0: supports D1 D2
[ 0.425451] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.431235] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.431243] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.431246] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.431294] pci 0000:02:00.0: [168c:002e] type 00 class 0x028000
[ 0.431312] pci 0000:02:00.0: reg 10: [mem 0xfe900000-0xfe90ffff 64bit]
[ 0.431393] pci 0000:02:00.0: supports D1
[ 0.431395] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.439215] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.439223] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.439266] pci 0000:03:05.0: [1180:0475] type 02 class 0x060700
[ 0.439286] pci 0000:03:05.0: reg 10: [mem 0xfe800000-0xfe800fff]
[ 0.439320] pci 0000:03:05.0: supports D1 D2
[ 0.439322] pci 0000:03:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.439365] pci 0000:00:14.4: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.439369] pci 0000:00:14.4: bridge window [io 0xc000-0xdfff]
[ 0.439372] pci 0000:00:14.4: bridge window [mem 0xfd400000-0xfe8fffff]
[ 0.439376] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd13fffff pref]
[ 0.439379] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.439381] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.439383] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.439385] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.439388] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.439390] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.439392] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.439426] pci_bus 0000:04: busn_res: can not insert [bus 04-ff] under [bus 03-04] (conflicts with (null) [bus 03-04])
[ 0.439430] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 07
[ 0.439433] pci_bus 0000:04: busn_res: can not insert [bus 04-07] under [bus 03-04] (conflicts with (null) [bus 03-04])
[ 0.439436] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:03 [bus 03-04]
[ 0.439492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.439647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
[ 0.439708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC03._PRT]
[ 0.439773] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.453549] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.453638] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.453729] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.453828] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.453902] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.453962] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.454017] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.454073] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.454180] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.454188] vgaarb: loaded
[ 0.454189] vgaarb: bridge control possible 0000:00:01.0
[ 0.454247] PCI: Using ACPI for IRQ routing
[ 0.460992] PCI: pci_cache_line_size set to 64 bytes
[ 0.461058] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.461061] e820: reserve RAM buffer [mem 0x9d85d000-0x9fffffff]
[ 0.461062] e820: reserve RAM buffer [mem 0x9ddfd000-0x9fffffff]
[ 0.461064] e820: reserve RAM buffer [mem 0x9ea4b000-0x9fffffff]
[ 0.461066] e820: reserve RAM buffer [mem 0x9f073000-0x9fffffff]
[ 0.461068] e820: reserve RAM buffer [mem 0x9f800000-0x9fffffff]
[ 0.461069] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.461191] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.461194] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.463225] Switching to clocksource hpet
[ 0.466484] pnp: PnP ACPI init
[ 0.466501] ACPI: bus type pnp registered
[ 0.466627] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.466631] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.467288] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.467292] system 00:01: [io 0x040b] has been reserved
[ 0.467295] system 00:01: [io 0x04d6] has been reserved
[ 0.467298] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.467300] system 00:01: [io 0x0c14] has been reserved
[ 0.467303] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.467305] system 00:01: [io 0x0c52] has been reserved
[ 0.467308] system 00:01: [io 0x0c6c] has been reserved
[ 0.467310] system 00:01: [io 0x0c6f] has been reserved
[ 0.467312] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.467315] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.467317] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.467320] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.467322] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.467324] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.467327] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.467329] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.467332] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.467334] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.467338] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.467341] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.467343] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.467346] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.467349] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.467351] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.467354] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[ 0.467358] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.467551] system 00:02: [io 0x0a00-0x0a1f] has been reserved
[ 0.467554] system 00:02: [io 0x0600-0x060f] has been reserved
[ 0.467557] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.467633] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.468078] pnp 00:04: [dma 0 disabled]
[ 0.468128] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.468666] pnp 00:05: [dma 3]
[ 0.468845] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.468859] pnp 00:06: [dma 4]
[ 0.468884] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.468924] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.468956] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.469032] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.469035] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.469073] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.469125] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.469343] system 00:0c: [mem 0xa0000000-0xbfffffff] has been reserved
[ 0.469346] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.469467] system 00:0d: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.469470] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.469709] pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.469713] pnp: PnP ACPI: found 15 devices
[ 0.469714] ACPI: ACPI bus type pnp unregistered
[ 0.476907] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.476911] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.476914] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.476918] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.476921] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.476930] pci 0000:03:05.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.476932] pci 0000:03:05.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.476934] pci 0000:03:05.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.476936] pci 0000:03:05.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.476941] pci 0000:03:05.0: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref]
[ 0.476945] pci 0000:03:05.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff]
[ 0.476947] pci 0000:03:05.0: BAR 13: assigned [io 0xc000-0xc0ff]
[ 0.476948] pci 0000:03:05.0: BAR 14: assigned [io 0xc400-0xc4ff]
[ 0.476953] pci 0000:03:05.0: CardBus bridge to [bus 04-07]
[ 0.476954] pci 0000:03:05.0: bridge window [io 0xc000-0xc0ff]
[ 0.476958] pci 0000:03:05.0: bridge window [io 0xc400-0xc4ff]
[ 0.476963] pci 0000:03:05.0: bridge window [mem 0xd4000000-0xd7ffffff pref]
[ 0.476967] pci 0000:03:05.0: bridge window [mem 0xd8000000-0xdbffffff]
[ 0.476971] pci 0000:00:14.4: PCI bridge to [bus 03-04]
[ 0.476973] pci 0000:00:14.4: bridge window [io 0xc000-0xdfff]
[ 0.476977] pci 0000:00:14.4: bridge window [mem 0xfd400000-0xfe8fffff]
[ 0.476981] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd13fffff pref]
[ 0.477021] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.477023] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.477025] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.477027] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.477028] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.477030] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.477032] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.477034] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.477035] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.477037] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.477039] pci_bus 0000:03: resource 0 [io 0xc000-0xdfff]
[ 0.477040] pci_bus 0000:03: resource 1 [mem 0xfd400000-0xfe8fffff]
[ 0.477042] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd13fffff pref]
[ 0.477043] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
[ 0.477045] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
[ 0.477046] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
[ 0.477048] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
[ 0.477049] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.477051] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.477053] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.477054] pci_bus 0000:04: resource 0 [io 0xc000-0xc0ff]
[ 0.477056] pci_bus 0000:04: resource 1 [io 0xc400-0xc4ff]
[ 0.477057] pci_bus 0000:04: resource 2 [mem 0xd4000000-0xd7ffffff pref]
[ 0.477059] pci_bus 0000:04: resource 3 [mem 0xd8000000-0xdbffffff]
[ 0.477103] NET: Registered protocol family 2
[ 0.477363] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.477946] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 0.478762] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.478804] TCP: reno registered
[ 0.478864] UDP hash table entries: 4096 (order: 7, 524288 bytes)
[ 0.479021] UDP-Lite hash table entries: 4096 (order: 7, 524288 bytes)
[ 0.479229] NET: Registered protocol family 1
[ 0.479251] pci 0000:00:01.0: Boot video device
[ 0.718749] PCI: CLS 64 bytes, default 64
[ 0.718823] Unpacking initramfs...
[ 0.892546] Freeing initrd memory: 10904k freed
[ 0.895583] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.895586] AMD-Vi: Extended features: PreF PPR GT IA
[ 0.895589] AMD-Vi: Interrupt remapping enabled
[ 0.895617] pci 0000:00:00.2: irq 40 for MSI/MSI-X
[ 0.904037] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.904514] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.904518] software IO TLB [mem 0x9985d000-0x9d85d000] (64MB) mapped at [ffff88009985d000-ffff88009d85cfff]
[ 0.904768] LVT offset 0 assigned for vector 0x400
[ 0.904794] perf: AMD IBS detected (0x000000ff)
[ 0.905028] audit: initializing netlink socket (disabled)
[ 0.905049] type=2000 audit(1364280064.716:1): initialized
[ 0.916227] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.916442] VFS: Disk quotas dquot_6.5.2
[ 0.916463] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.916559] msgmni has been set to 14770
[ 0.916908] alg: No test for stdrng (krng)
[ 0.916936] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.916938] io scheduler noop registered
[ 0.916940] io scheduler deadline registered
[ 0.916954] io scheduler cfq registered (default)
[ 0.917132] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.917154] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.917155] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.917542] GHES: HEST is not enabled!
[ 0.917677] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.938025] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.938541] Linux agpgart interface v0.103
[ 0.938667] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.938669] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.938856] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.938993] mousedev: PS/2 mouse device common for all mice
[ 0.939037] rtc_cmos 00:07: RTC can wake from S4
[ 0.939148] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.939203] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.939212] cpuidle: using governor ladder
[ 0.939214] cpuidle: using governor menu
[ 0.939240] drop_monitor: Initializing network drop monitor service
[ 0.939301] TCP: cubic registered
[ 0.939331] NET: Registered protocol family 10
[ 0.939533] mip6: Mobile IPv6
[ 0.939536] NET: Registered protocol family 17
[ 0.939552] Key type dns_resolver registered
[ 0.940042] PM: Hibernation image not present or could not be loaded.
[ 0.940055] registered taskstats version 1
[ 0.940557] rtc_cmos 00:07: setting system clock to 2013-03-26 06:41:05 UTC (1364280065)
[ 0.942159] Freeing unused kernel memory: 944k freed
[ 0.942397] Write protecting the kernel read-only data: 6144k
[ 0.943659] Freeing unused kernel memory: 428k freed
[ 0.945334] Freeing unused kernel memory: 556k freed
[ 0.958634] udevd[75]: starting version 175
[ 0.958785] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.005254] ACPI: bus type usb registered
[ 1.006371] usbcore: registered new interface driver usbfs
[ 1.006855] usbcore: registered new interface driver hub
[ 1.007249] usbcore: registered new device driver usb
[ 1.009648] SCSI subsystem initialized
[ 1.013275] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.013334] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.013417] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 1.013488] QUIRK: Enable AMD PLL fix
[ 1.013509] r8169 0000:01:00.0: irq 41 for MSI/MSI-X
[ 1.013809] xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb4a000
[ 1.013885] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[ 1.013897] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 1.013909] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 1.013920] xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
[ 1.013928] xhci_hcd 0000:00:10.0: irq 46 for MSI/MSI-X
[ 1.014611] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.015042] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.015059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.015063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.015066] usb usb1: Product: xHCI Host Controller
[ 1.015069] usb usb1: Manufacturer: Linux 3.8.4-rt1 xhci_hcd
[ 1.015071] usb usb1: SerialNumber: 0000:00:10.0
[ 1.016302] ACPI: bus type scsi registered
[ 1.016476] libata version 3.00 loaded.
[ 1.018469] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c1a000, d4:3d:7e:53:cb:b8, XID 0c900800 IRQ 41
[ 1.018472] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.018592] xHCI xhci_add_endpoint called for root hub
[ 1.018595] xHCI xhci_check_bandwidth called for root hub
[ 1.020743] hub 1-0:1.0: USB hub found
[ 1.020760] hub 1-0:1.0: 2 ports detected
[ 1.024489] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.024498] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.024561] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.024564] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.024566] usb usb2: Product: xHCI Host Controller
[ 1.024569] usb usb2: Manufacturer: Linux 3.8.4-rt1 xhci_hcd
[ 1.024572] usb usb2: SerialNumber: 0000:00:10.0
[ 1.027331] xHCI xhci_add_endpoint called for root hub
[ 1.027335] xHCI xhci_check_bandwidth called for root hub
[ 1.028229] hub 2-0:1.0: USB hub found
[ 1.028241] hub 2-0:1.0: 2 ports detected
[ 1.045848] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.045893] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.046550] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb50000
[ 1.105547] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.105552] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.105554] usb usb3: Product: OHCI Host Controller
[ 1.105556] usb usb3: Manufacturer: Linux 3.8.4-rt1 ohci_hcd
[ 1.105558] usb usb3: SerialNumber: 0000:00:12.0
[ 1.108434] hub 3-0:1.0: USB hub found
[ 1.108448] hub 3-0:1.0: 5 ports detected
[ 1.112217] ahci 0000:00:11.0: version 3.0
[ 1.112310] ahci 0000:00:11.0: irq 47 for MSI/MSI-X
[ 1.112563] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 1.112568] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.116103] scsi0 : ahci
[ 1.118250] ata1: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 47
[ 1.118380] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.118413] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[ 1.118668] xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb48000
[ 1.118772] xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
[ 1.118781] xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
[ 1.118791] xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
[ 1.118802] xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
[ 1.118811] xhci_hcd 0000:00:10.1: irq 52 for MSI/MSI-X
[ 1.119378] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.119383] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.119386] usb usb4: Product: xHCI Host Controller
[ 1.119388] usb usb4: Manufacturer: Linux 3.8.4-rt1 xhci_hcd
[ 1.119392] usb usb4: SerialNumber: 0000:00:10.1
[ 1.121831] xHCI xhci_add_endpoint called for root hub
[ 1.121834] xHCI xhci_check_bandwidth called for root hub
[ 1.122585] hub 4-0:1.0: USB hub found
[ 1.122599] hub 4-0:1.0: 2 ports detected
[ 1.125012] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.125017] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5
[ 1.125063] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.125066] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.125067] usb usb5: Product: xHCI Host Controller
[ 1.125069] usb usb5: Manufacturer: Linux 3.8.4-rt1 xhci_hcd
[ 1.125071] usb usb5: SerialNumber: 0000:00:10.1
[ 1.127411] xHCI xhci_add_endpoint called for root hub
[ 1.127415] xHCI xhci_check_bandwidth called for root hub
[ 1.128203] hub 5-0:1.0: USB hub found
[ 1.128214] hub 5-0:1.0: 2 ports detected
[ 1.161508] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.161520] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 1.161590] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4e000
[ 1.221279] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.221283] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.221285] usb usb6: Product: OHCI Host Controller
[ 1.221287] usb usb6: Manufacturer: Linux 3.8.4-rt1 ohci_hcd
[ 1.221289] usb usb6: SerialNumber: 0000:00:13.0
[ 1.221455] hub 6-0:1.0: USB hub found
[ 1.221465] hub 6-0:1.0: 5 ports detected
[ 1.221643] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.221651] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.221708] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4c000
[ 1.281128] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.281133] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.281135] usb usb7: Product: OHCI Host Controller
[ 1.281136] usb usb7: Manufacturer: Linux 3.8.4-rt1 ohci_hcd
[ 1.281138] usb usb7: SerialNumber: 0000:00:14.5
[ 1.281307] hub 7-0:1.0: USB hub found
[ 1.281315] hub 7-0:1.0: 2 ports detected
[ 1.556412] usb 6-2: new low-speed USB device number 2 using ohci_hcd
[ 1.608272] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.609205] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM04B0Q, max UDMA/133
[ 1.609209] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.610540] ata1.00: configured for UDMA/133
[ 1.610663] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
[ 1.615416] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.615521] sd 0:0:0:0: [sda] Write Protect is off
[ 1.615524] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.615555] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.616146] sda: sda1 sda2 < sda5 >
[ 1.616526] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.618246] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.658983] PM: Starting manual resume from disk
[ 1.658986] PM: Hibernation image partition 8:5 present
[ 1.658987] PM: Looking for hibernation image.
[ 1.659242] PM: Image not found (code -22)
[ 1.659246] PM: Hibernation image not present or could not be loaded.
[ 1.675779] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.722913] usb 6-2: New USB device found, idVendor=046d, idProduct=c05b
[ 1.722918] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.722921] usb 6-2: Product: USB Optical Mouse
[ 1.722923] usb 6-2: Manufacturer: Logitech
[ 1.845250] udevd[380]: starting version 175
[ 1.859439] usb 6-3: new full-speed USB device number 3 using ohci_hcd
[ 1.899308] tsc: Refined TSC clocksource calibration: 3392.601 MHz
[ 1.899314] Switching to clocksource tsc
[ 1.962569] ACPI: acpi_idle registered with cpuidle
[ 1.970257] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.970266] ACPI: Power Button [PWRB]
[ 2.005547] ehci-pci: EHCI PCI platform driver
[ 2.006439] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.006649] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 8
[ 2.006659] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.006670] ehci-pci 0000:00:12.2: debug port 1
[ 2.006749] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4f000
[ 2.012413] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.012423] ACPI: Power Button [PWRF]
[ 2.014987] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.015363] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.015368] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.015371] usb usb8: Product: EHCI Host Controller
[ 2.015375] usb usb8: Manufacturer: Linux 3.8.4-rt1 ehci_hcd
[ 2.015377] usb usb8: SerialNumber: 0000:00:12.2
[ 2.018148] microcode: CPU0: patch_level=0x06001119
[ 2.018354] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 2.024864] wmi: Mapper loaded
[ 2.026062] usb 6-3: New USB device found, idVendor=1397, idProduct=00bc
[ 2.026066] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.026069] usb 6-3: Product: BCF2000
[ 2.026071] usb 6-3: Manufacturer: BEHRINGER
[ 2.027552] hub 8-0:1.0: USB hub found
[ 2.027563] hub 8-0:1.0: 5 ports detected
[ 2.058900] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.061548] yenta_cardbus 0000:03:05.0: CardBus bridge found [0000:0000]
[ 2.063130] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.063312] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 9
[ 2.063325] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.063339] ehci-pci 0000:00:13.2: debug port 1
[ 2.063417] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4d000
[ 2.063783] cfg80211: Calling CRDA to update world regulatory domain
[ 2.070855] usb 6-2: USB disconnect, device number 2
[ 2.074814] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.075720] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.075723] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.075726] usb usb9: Product: EHCI Host Controller
[ 2.075728] usb usb9: Manufacturer: Linux 3.8.4-rt1 ehci_hcd
[ 2.075729] usb usb9: SerialNumber: 0000:00:13.2
[ 2.095842] hub 9-0:1.0: USB hub found
[ 2.095857] hub 9-0:1.0: 5 ports detected
[ 2.105940] hda-intel 0000:00:01.1: Force to non-snoop mode
[ 2.105998] snd_hda_intel 0000:00:01.1: irq 53 for MSI/MSI-X
[ 2.120771] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
[ 2.159073] parport_pc 00:05: reported by Plug and Play ACPI
[ 2.159158] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 2.177512] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
[ 2.181610] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 2.186287] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 2.187186] yenta_cardbus 0000:03:05.0: ISA IRQ mask 0x0000, PCI irq 20
[ 2.187191] yenta_cardbus 0000:03:05.0: Socket status: 30000820
[ 2.187195] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 2.187204] yenta_cardbus 0000:03:05.0: pcmcia: parent PCI bridge window: [io 0xc000-0xdfff]
[ 2.187208] yenta_cardbus 0000:03:05.0: pcmcia: parent PCI bridge window: [mem 0xfd400000-0xfe8fffff]
[ 2.187212] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfd400000-0xfe8fffff:
[ 2.187241] excluding 0xfe7b0000-0xfe8fffff
[ 2.187246] yenta_cardbus 0000:03:05.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd13fffff pref]
[ 2.187249] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd13fffff:
[ 2.187278] excluding 0xd0000000-0xd13fffff
[ 2.190885] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 2.194936] ath: EEPROM regdomain: 0x809c
[ 2.194940] ath: EEPROM indicates we should expect a country code
[ 2.194942] ath: doing EEPROM country->regdmn map search
[ 2.194944] ath: country maps to regdmn code: 0x52
[ 2.194946] ath: Country alpha2 being used: CN
[ 2.194947] ath: Regpair used: 0x52
[ 2.205974] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 2.214116] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 2.219642] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 2.226421] usb 6-3: USB disconnect, device number 3
[ 2.227751] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90011240000, irq=17
[ 2.228797] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 2.232137] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 2.320011] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
[ 2.320293] microcode: CPU1: patch_level=0x06001119
[ 2.320657] microcode: CPU2: patch_level=0x06001119
[ 2.320955] microcode: CPU3: patch_level=0x06001119
[ 2.323000] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.348895] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 2.358546] cfg80211: World regulatory domain updated:
[ 2.358551] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.358554] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.358557] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.358559] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.358562] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.358565] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.358596] cfg80211: Calling CRDA for country: CN
[ 2.378677] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 2.378699] excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 2.379632] kvm: Nested Virtualization enabled
[ 2.379638] kvm: Nested Paging enabled
[ 2.382526] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 2.382552] excluding 0xa0000000-0xa0ffffff
[ 2.386576] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 2.386607] excluding 0x60000000-0x60ffffff
[ 2.390925] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.524388] cfg80211: Regulatory domain changed to country: CN
[ 2.524392] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.524395] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2.524397] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 2.612718] usbcore: registered new interface driver usbhid
[ 2.612726] usbhid: USB HID core driver
[ 2.630043] usbcore: registered new interface driver snd-usb-audio
[ 3.056137] usb 6-2: new low-speed USB device number 4 using ohci_hcd
[ 3.088127] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 3.088161] pci 0000:04:00.0: [10ee:3fc5] type 00 class 0x040100
[ 3.088193] pci 0000:04:00.0: reg 10: [mem 0x00000000-0x0000ffff]
[ 3.088322] pci 0000:04:00.0: BAR 0: assigned [mem 0xd8000000-0xd800ffff]
[ 3.088346] pci 0000:04:00.0: cache line size of 64 is not supported
[ 3.094951] snd_hdsp 0000:04:00.0: enabling device (0000 -> 0002)
[ 3.222787] usb 6-2: New USB device found, idVendor=046d, idProduct=c05b
[ 3.222801] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.222808] usb 6-2: Product: USB Optical Mouse
[ 3.222816] usb 6-2: Manufacturer: Logitech
[ 3.250644] Adding 10157052k swap on /dev/sda5. Priority:-1 extents:1 across:10157052k SS
[ 3.285071] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 3.468644] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 3.490963] usb 6-3: new full-speed USB device number 5 using ohci_hcd
[ 3.517124] [drm] Initialized drm 1.1.0 20060810
[ 3.527609] [drm] radeon kernel modesetting enabled.
[ 3.528572] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9901 0x1462:0x7721).
[ 3.528623] [drm] register mmio base: 0xFEB00000
[ 3.528625] [drm] register mmio size: 262144
[ 3.528797] ATOM BIOS: 113
[ 3.528826] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 3.528829] radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 3.529593] [drm] Detected VRAM RAM=512M, BAR=256M
[ 3.529598] [drm] RAM width 64bits DDR
[ 3.530473] [TTM] Zone kernel: Available graphics memory: 3782326 kiB
[ 3.530475] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 3.530477] [TTM] Initializing pool allocator
[ 3.530484] [TTM] Initializing DMA pool allocator
[ 3.530513] [drm] radeon: 512M of VRAM memory ready
[ 3.530515] [drm] radeon: 512M of GTT memory ready.
[ 3.530569] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.530571] [drm] Driver supports precise vblank timestamp query.
[ 3.530615] radeon 0000:00:01.0: irq 54 for MSI/MSI-X
[ 3.530628] radeon 0000:00:01.0: radeon: using MSI.
[ 3.533068] [drm] radeon: irq initialized.
[ 3.533076] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 3.533902] [drm] Loading ARUBA Microcode
[ 3.559094] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 3.559233] radeon 0000:00:01.0: WB enabled
[ 3.559237] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8802343bec00
[ 3.559239] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8802343bec04
[ 3.559242] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8802343bec08
[ 3.559244] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8802343bec0c
[ 3.559247] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff8802343bec10
[ 3.578716] [drm] ring test on 0 succeeded in 2 usecs
[ 3.578776] [drm] ring test on 3 succeeded in 2 usecs
[ 3.578784] [drm] ring test on 4 succeeded in 1 usecs
[ 3.608689] [drm] ib test on ring 0 succeeded in 0 usecs
[ 3.609211] [drm] ib test on ring 3 succeeded in 0 usecs
[ 3.609735] [drm] ib test on ring 4 succeeded in 1 usecs
[ 3.614633] [drm] Radeon Display Connectors
[ 3.614645] [drm] Connector 0:
[ 3.614647] [drm] HDMI-A-1
[ 3.614649] [drm] HPD1
[ 3.614652] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 3.614654] [drm] Encoders:
[ 3.614656] [drm] DFP1: INTERNAL_UNIPHY2
[ 3.614658] [drm] Connector 1:
[ 3.614660] [drm] VGA-1
[ 3.614662] [drm] HPD2
[ 3.614665] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 3.614666] [drm] Encoders:
[ 3.614668] [drm] CRT1: INTERNAL_UNIPHY2
[ 3.614675] [drm] CRT1: NUTMEG
[ 3.614677] [drm] Connector 2:
[ 3.614679] [drm] DVI-D-1
[ 3.614680] [drm] HPD3
[ 3.614682] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 3.614683] [drm] Encoders:
[ 3.614684] [drm] DFP2: INTERNAL_UNIPHY
[ 3.657576] usb 6-3: New USB device found, idVendor=1397, idProduct=00bc
[ 3.657585] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.657591] usb 6-3: Product: BCF2000
[ 3.657596] usb 6-3: Manufacturer: BEHRINGER
[ 3.667816] [drm] Internal thermal controller without fan control
[ 3.667864] [drm] radeon: power management initialized
[ 3.697851] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.0/input/input13
[ 3.698150] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-2/input0
[ 3.825292] [drm] fb mappable at 0xC114C000
[ 3.825296] [drm] vram apper at 0xC0000000
[ 3.825297] [drm] size 3145728
[ 3.825299] [drm] fb depth is 24
[ 3.825300] [drm] pitch is 4096
[ 3.825412] fbcon: radeondrmfb (fb0) is primary device
[ 3.951761] Console: switching to colour frame buffer device 128x48
[ 3.956956] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 3.956961] radeon 0000:00:01.0: registered panic notifier
[ 3.956974] [drm] Initialized radeon 2.29.0 20080528 for 0000:00:01.0 on minor 0
[ 4.007325] loop: module loaded
[ 4.663278] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.474493] wlan0: authenticate with 00:12:bf:b5:6c:86
[ 5.481783] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[ 5.489961] wlan0: send auth to 00:12:bf:b5:6c:86 (try 1/3)
[ 5.492055] wlan0: authenticated
[ 5.493432] wlan0: associate with 00:12:bf:b5:6c:86 (try 1/3)
[ 5.507405] wlan0: RX AssocResp from 00:12:bf:b5:6c:86 (capab=0x431 status=0 aid=5)
[ 5.507504] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 5.507628] wlan0: associated
[ 5.644070] Hammerfall-DSP: wait for FIFO status <= 0 failed after 30 iterations
[ 5.645416] Hammerfall-DSP: loading firmware
[ 8.385129] RPC: Registered named UNIX socket transport module.
[ 8.385136] RPC: Registered udp transport module.
[ 8.385140] RPC: Registered tcp transport module.
[ 8.385143] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.395268] FS-Cache: Loaded
[ 8.405765] FS-Cache: Netfs 'nfs' registered for caching
[ 8.417173] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 8.939890] Hammerfall-DSP: finished firmware loading
[ 9.711107] Bluetooth: Core ver 2.16
[ 9.711132] NET: Registered protocol family 31
[ 9.711135] Bluetooth: HCI device and connection manager initialized
[ 9.711145] Bluetooth: HCI socket layer initialized
[ 9.711154] Bluetooth: L2CAP socket layer initialized
[ 9.711165] Bluetooth: SCO socket layer initialized
[ 9.716552] Bluetooth: RFCOMM TTY layer initialized
[ 9.716567] Bluetooth: RFCOMM socket layer initialized
[ 9.716570] Bluetooth: RFCOMM ver 1.11
[ 9.719802] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.719805] Bluetooth: BNEP filters: protocol multicast
[ 9.719816] Bluetooth: BNEP socket layer initialized
[ 9.879255] r8169 0000:01:00.0 eth0: link down
[ 9.879362] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[-- Attachment #5: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: soundcard (dma) stopped working with commit 27c2127 (x86/amd-iommu: Use only per-device dma_ops)
[not found] ` <CAHccUrL2_JLMyYzzBYUdUGy0VVRRk90u9_MyknPKcRJpr_ZDfQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2013-03-26 9:49 ` Joerg Roedel
[not found] ` <20130326094930.GD13035-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 10+ messages in thread
From: Joerg Roedel @ 2013-03-26 9:49 UTC (permalink / raw)
To: Andreas Degert; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Hi Andreas,
On Tue, Mar 26, 2013 at 08:37:02AM +0100, Andreas Degert wrote:
> Does anyone have some advice for further debugging?
Can you please boot with amd_iommu_dump on the kernel command line and
send dmesg after boot? This will print the parsing output of the IVRS
table to dmesg which will help debugging this problem.
Also, can you share what mainboard you have?
Thanks,
Joerg
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: soundcard (dma) stopped working with commit 27c2127 (x86/amd-iommu: Use only per-device dma_ops)
[not found] ` <20130326094930.GD13035-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2013-03-26 12:48 ` Andreas Degert
[not found] ` <CAHccUr+w1_65uBXLcmZLrPOgbC8Ldk8+PKxaRLv03rBYxBRDkg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 10+ messages in thread
From: Andreas Degert @ 2013-03-26 12:48 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
[-- Attachment #1: Type: text/plain, Size: 959 bytes --]
2013/3/26 Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>:
> Hi Andreas,
>
> On Tue, Mar 26, 2013 at 08:37:02AM +0100, Andreas Degert wrote:
>> Does anyone have some advice for further debugging?
>
> Can you please boot with amd_iommu_dump on the kernel command line and
> send dmesg after boot? This will print the parsing output of the IVRS
> table to dmesg which will help debugging this problem.
seems to be this (additionaly I have appended the full dump):
device: 00:00.2 cap: 0040 seg: 0 flags: fe info 1300
mmio-addr: 00000000feb80000
DEV_SELECT_RANGE_START devid: 00:01.0 flags: 00
DEV_RANGE_END devid: ff:1f.6
DEV_ALIAS_RANGE devid: 03:00.0 flags: 00 devid_to: 00:14.4
DEV_RANGE_END devid: 04:1f.7
DEV_SPECIAL(HPET[0]) devid: 00:14.0
DEV_SPECIAL(IOAPIC[5]) devid: 00:14.0
> Also, can you share what mainboard you have?
it's an msi FM2-A75MA-E35
> Thanks,
>
> Joerg
[-- Attachment #2: dmesg_amd_iommu_dump.txt --]
[-- Type: text/plain, Size: 59138 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.4 (root@phonus) (gcc version 4.7.2 (Debian 4.7.2-5) ) #3 SMP PREEMPT Sun Mar 24 17:54:07 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.4 amd_iommu_dump=1 root=UUID=6777b7d9-06b6-4cc8-9bdb-105e3cec9c26 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d85cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d85d000-0x000000009db3cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009db3d000-0x000000009ddfcfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ddfd000-0x000000009dea0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009dea1000-0x000000009ea49fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ea4a000-0x000000009ea4afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ea4b000-0x000000009ec50fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009ec51000-0x000000009f072fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f073000-0x000000009f7f3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f7f4000-0x000000009f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: MSI MS-7721/FM2-A75MA-E35 (MS-7721), BIOS V1.7 01/29/2013
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 00009F800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0x9f800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x9f7fffff]
[ 0.000000] [mem 0x00000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9f7fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x9f7fffff @ [mem 0x1fffe000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x23effffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
[ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
[ 0.000000] [mem 0x200000000-0x23effffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x23effffff @ [mem 0x9f7fc000-0x9f7fffff]
[ 0.000000] RAMDISK: [mem 0x36aaa000-0x3754cfff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 000000009de8e078 0006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 000000009de94320 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)
[ 0.000000] ACPI: DSDT 000000009de8e178 061A4 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 000000009de96080 00040
[ 0.000000] ACPI: APIC 000000009de94430 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 000000009de944a8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 000000009de944f0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 000000009de94530 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 000000009de94568 00D40 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 000000009de952a8 004B7 (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: IVRS 000000009de95760 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
[ 0.000000] ACPI: CRAT 000000009de957d0 002F8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23effffff]
[ 0.000000] NODE_DATA [mem 0x23effc000-0x23effffff]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880236e00000-ffff88023d7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x9d85cfff]
[ 0.000000] node 0: [mem 0x9db3d000-0x9ddfcfff]
[ 0.000000] node 0: [mem 0x9ea4a000-0x9ea4afff]
[ 0.000000] node 0: [mem 0x9ec51000-0x9f072fff]
[ 0.000000] node 0: [mem 0x9f7f4000-0x9f7fffff]
[ 0.000000] node 0: [mem 0x100001000-0x23effffff]
[ 0.000000] On node 0 totalpages: 1953497
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8790 pages used for memmap
[ 0.000000] DMA32 zone: 634102 pages, LIFO batch:31
[ 0.000000] Normal zone: 17864 pages used for memmap
[ 0.000000] Normal zone: 1288759 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009d85d000 - 000000009db3d000
[ 0.000000] PM: Registered nosave memory: 000000009ddfd000 - 000000009dea1000
[ 0.000000] PM: Registered nosave memory: 000000009dea1000 - 000000009ea4a000
[ 0.000000] PM: Registered nosave memory: 000000009ea4b000 - 000000009ec51000
[ 0.000000] PM: Registered nosave memory: 000000009f073000 - 000000009f7f4000
[ 0.000000] PM: Registered nosave memory: 000000009f800000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[ 0.000000] e820: [mem 0x9f800000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023ec00000 s84032 r8192 d22464 u524288
[ 0.000000] pcpu-alloc: s84032 r8192 d22464 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1926781
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.4 amd_iommu_dump=1 root=UUID=6777b7d9-06b6-4cc8-9bdb-105e3cec9c26 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 94000000
[ 0.000000] PM: Registered nosave memory: 0000000094000000 - 0000000098000000
[ 0.000000] Memory: 7553972k/9420800k available (3590k kernel code, 1606812k absent, 260016k reserved, 3147k data, 616k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3393.014 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6786.02 BogoMIPS (lpj=13572056)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000032] Security Framework initialized
[ 0.000035] AppArmor: AppArmor disabled by boot time parameter
[ 0.000476] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002454] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003357] Mount-cache hash table entries: 256
[ 0.003495] Initializing cgroup subsys cpuacct
[ 0.003498] Initializing cgroup subsys devices
[ 0.003499] Initializing cgroup subsys freezer
[ 0.003500] Initializing cgroup subsys net_cls
[ 0.003502] Initializing cgroup subsys blkio
[ 0.003503] Initializing cgroup subsys perf_event
[ 0.003525] tseg: 009f800000
[ 0.003526] CPU: Physical Processor ID: 0
[ 0.003527] CPU: Processor Core ID: 0
[ 0.003528] mce: CPU supports 7 MCE banks
[ 0.003540] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.003540] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.003540] tlb_flushall_shift: 5
[ 0.003598] Freeing SMP alternatives: 8k freed
[ 0.003804] ACPI: Core revision 20121018
[ 0.013454] AMD-Vi: device: 00:00.2 cap: 0040 seg: 0 flags: fe info 1300
[ 0.013457] AMD-Vi: mmio-addr: 00000000feb80000
[ 0.013473] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:01.0 flags: 00
[ 0.013474] AMD-Vi: DEV_RANGE_END devid: ff:1f.6
[ 0.014037] AMD-Vi: DEV_ALIAS_RANGE devid: 03:00.0 flags: 00 devid_to: 00:14.4
[ 0.014038] AMD-Vi: DEV_RANGE_END devid: 04:1f.7
[ 0.014048] AMD-Vi: DEV_SPECIAL(HPET[0]) devid: 00:14.0
[ 0.014050] AMD-Vi: DEV_SPECIAL(IOAPIC[5]) devid: 00:14.0
[ 0.096342] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.135924] smpboot: CPU0: AMD A10-5700 APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
[ 0.242357] Performance Events:
[ 0.242358] perf: AMD core performance counters detected
[ 0.242361] AMD PMU driver.
[ 0.242362] ... version: 0
[ 0.242363] ... bit width: 48
[ 0.242364] ... generic registers: 6
[ 0.242365] ... value mask: 0000ffffffffffff
[ 0.242366] ... max period: 00007fffffffffff
[ 0.242367] ... fixed-purpose events: 0
[ 0.242368] ... event mask: 000000000000003f
[ 0.266500] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.274450] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.327348] Brought up 4 CPUs
[ 0.327351] smpboot: Total of 4 processors activated (27144.11 BogoMIPS)
[ 0.328255] devtmpfs: initialized
[ 0.330515] PM: Registering ACPI NVS region [mem 0x9ddfd000-0x9dea0fff] (671744 bytes)
[ 0.330532] PM: Registering ACPI NVS region [mem 0x9ea4b000-0x9ec50fff] (2121728 bytes)
[ 0.330672] regulator-dummy: no parameters
[ 0.330731] NET: Registered protocol family 16
[ 0.330870] ACPI: bus type pci registered
[ 0.330915] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.330917] PCI: not using MMCONFIG
[ 0.330919] PCI: Using configuration type 1 for base access
[ 0.330920] PCI: Using configuration type 1 for extended access
[ 0.331637] bio: create slab <bio-0> at 0
[ 0.331727] ACPI: Added _OSI(Module Device)
[ 0.331728] ACPI: Added _OSI(Processor Device)
[ 0.331730] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.331731] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.332403] ACPI: EC: Look up EC in DSDT
[ 0.333191] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.335973] ACPI: Interpreter enabled
[ 0.335976] ACPI: (supports S0 S3 S4 S5)
[ 0.335992] ACPI: Using IOAPIC for interrupt routing
[ 0.336108] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.336140] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.371931] ACPI: No dock devices found.
[ 0.371936] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.372079] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.372082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.372380] pci_root PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[ 0.372511] pci_root PNP0A03:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.372711] PCI host bridge to bus 0000:00
[ 0.372713] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.372715] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.372717] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.372719] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.372720] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.372722] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.372724] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.372725] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.372732] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.372761] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
[ 0.372811] pci 0000:00:01.0: [1002:9901] type 00 class 0x030000
[ 0.372818] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.372823] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
[ 0.372827] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.372858] pci 0000:00:01.0: supports D1 D2
[ 0.372871] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.372877] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
[ 0.372912] pci 0000:00:01.1: supports D1 D2
[ 0.372929] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 0.372963] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.372978] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[ 0.373012] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.373048] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[ 0.373065] pci 0000:00:10.0: reg 10: [mem 0xfeb4a000-0xfeb4bfff 64bit]
[ 0.373152] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.373188] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
[ 0.373205] pci 0000:00:10.1: reg 10: [mem 0xfeb48000-0xfeb49fff 64bit]
[ 0.373291] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.373324] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.373339] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
[ 0.373347] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
[ 0.373354] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
[ 0.373362] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
[ 0.373369] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
[ 0.373377] pci 0000:00:11.0: reg 24: [mem 0xfeb51000-0xfeb517ff]
[ 0.373423] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.373434] pci 0000:00:12.0: reg 10: [mem 0xfeb50000-0xfeb50fff]
[ 0.373491] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.373505] pci 0000:00:12.2: reg 10: [mem 0xfeb4f000-0xfeb4f0ff]
[ 0.373570] pci 0000:00:12.2: supports D1 D2
[ 0.373571] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.373591] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.373601] pci 0000:00:13.0: reg 10: [mem 0xfeb4e000-0xfeb4efff]
[ 0.373659] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.373674] pci 0000:00:13.2: reg 10: [mem 0xfeb4d000-0xfeb4d0ff]
[ 0.373739] pci 0000:00:13.2: supports D1 D2
[ 0.373740] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.373759] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.373821] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.373837] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.373889] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.373902] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.373962] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.374015] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 0.374026] pci 0000:00:14.5: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
[ 0.374090] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.374107] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.374122] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.374138] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.374157] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.374171] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.374227] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.374239] pci 0000:01:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.374259] pci 0000:01:00.0: reg 18: [mem 0xfea04000-0xfea04fff 64bit pref]
[ 0.374272] pci 0000:01:00.0: reg 20: [mem 0xfea00000-0xfea03fff 64bit pref]
[ 0.374324] pci 0000:01:00.0: supports D1 D2
[ 0.374326] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.382056] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.382063] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.382066] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.382113] pci 0000:02:00.0: [168c:002e] type 00 class 0x028000
[ 0.382130] pci 0000:02:00.0: reg 10: [mem 0xfe900000-0xfe90ffff 64bit]
[ 0.382208] pci 0000:02:00.0: supports D1
[ 0.382210] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.390031] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.390039] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.390077] pci 0000:03:05.0: [1180:0475] type 02 class 0x060700
[ 0.390096] pci 0000:03:05.0: reg 10: [mem 0xfe800000-0xfe800fff]
[ 0.390128] pci 0000:03:05.0: supports D1 D2
[ 0.390130] pci 0000:03:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.390172] pci 0000:00:14.4: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.390175] pci 0000:00:14.4: bridge window [io 0xc000-0xdfff]
[ 0.390179] pci 0000:00:14.4: bridge window [mem 0xfd400000-0xfe8fffff]
[ 0.390182] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd13fffff pref]
[ 0.390184] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.390186] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.390188] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.390190] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.390191] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.390193] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.390195] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.390227] pci_bus 0000:04: busn_res: can not insert [bus 04-ff] under [bus 03-04] (conflicts with (null) [bus 03-04])
[ 0.390231] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 07
[ 0.390233] pci_bus 0000:04: busn_res: can not insert [bus 04-07] under [bus 03-04] (conflicts with (null) [bus 03-04])
[ 0.390237] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:03 [bus 03-04]
[ 0.390270] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.390349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
[ 0.390373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC03._PRT]
[ 0.390396] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.395432] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.395486] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.395540] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.395591] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.395632] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.395663] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.395694] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.395725] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.395806] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.395811] vgaarb: loaded
[ 0.395812] vgaarb: bridge control possible 0000:00:01.0
[ 0.395847] PCI: Using ACPI for IRQ routing
[ 0.402547] PCI: pci_cache_line_size set to 64 bytes
[ 0.402605] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.402606] e820: reserve RAM buffer [mem 0x9d85d000-0x9fffffff]
[ 0.402608] e820: reserve RAM buffer [mem 0x9ddfd000-0x9fffffff]
[ 0.402610] e820: reserve RAM buffer [mem 0x9ea4b000-0x9fffffff]
[ 0.402611] e820: reserve RAM buffer [mem 0x9f073000-0x9fffffff]
[ 0.402613] e820: reserve RAM buffer [mem 0x9f800000-0x9fffffff]
[ 0.402614] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.402703] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.402706] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.404723] Switching to clocksource hpet
[ 0.406325] pnp: PnP ACPI init
[ 0.406336] ACPI: bus type pnp registered
[ 0.406417] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.406420] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.406826] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.406828] system 00:01: [io 0x040b] has been reserved
[ 0.406830] system 00:01: [io 0x04d6] has been reserved
[ 0.406832] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.406834] system 00:01: [io 0x0c14] has been reserved
[ 0.406836] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.406838] system 00:01: [io 0x0c52] has been reserved
[ 0.406840] system 00:01: [io 0x0c6c] has been reserved
[ 0.406842] system 00:01: [io 0x0c6f] has been reserved
[ 0.406844] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.406846] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.406848] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.406850] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.406853] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.406855] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.406857] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.406859] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.406861] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.406863] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.406866] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.406868] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.406870] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.406873] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.406875] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.406877] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.406879] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[ 0.406882] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.406984] system 00:02: [io 0x0a00-0x0a1f] has been reserved
[ 0.406987] system 00:02: [io 0x0600-0x060f] has been reserved
[ 0.406989] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.407038] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.407243] pnp 00:04: [dma 0 disabled]
[ 0.407284] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.407519] pnp 00:05: [dma 3]
[ 0.407604] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.407613] pnp 00:06: [dma 4]
[ 0.407627] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.407653] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.407672] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.407714] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.407717] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.407742] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.407771] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.407882] system 00:0c: [mem 0xa0000000-0xbfffffff] has been reserved
[ 0.407884] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.407945] system 00:0d: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.407948] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.408070] pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.408073] pnp: PnP ACPI: found 15 devices
[ 0.408074] ACPI: ACPI bus type pnp unregistered
[ 0.414305] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.414308] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.414311] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.414316] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.414319] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.414324] pci 0000:03:05.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.414326] pci 0000:03:05.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.414328] pci 0000:03:05.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.414330] pci 0000:03:05.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.414335] pci 0000:03:05.0: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref]
[ 0.414338] pci 0000:03:05.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff]
[ 0.414339] pci 0000:03:05.0: BAR 13: assigned [io 0xc000-0xc0ff]
[ 0.414341] pci 0000:03:05.0: BAR 14: assigned [io 0xc400-0xc4ff]
[ 0.414344] pci 0000:03:05.0: CardBus bridge to [bus 04-07]
[ 0.414345] pci 0000:03:05.0: bridge window [io 0xc000-0xc0ff]
[ 0.414349] pci 0000:03:05.0: bridge window [io 0xc400-0xc4ff]
[ 0.414353] pci 0000:03:05.0: bridge window [mem 0xd4000000-0xd7ffffff pref]
[ 0.414357] pci 0000:03:05.0: bridge window [mem 0xd8000000-0xdbffffff]
[ 0.414361] pci 0000:00:14.4: PCI bridge to [bus 03-04]
[ 0.414364] pci 0000:00:14.4: bridge window [io 0xc000-0xdfff]
[ 0.414368] pci 0000:00:14.4: bridge window [mem 0xfd400000-0xfe8fffff]
[ 0.414371] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd13fffff pref]
[ 0.414408] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.414410] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.414411] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.414413] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.414414] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.414416] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.414417] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.414419] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.414421] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.414422] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.414424] pci_bus 0000:03: resource 0 [io 0xc000-0xdfff]
[ 0.414425] pci_bus 0000:03: resource 1 [mem 0xfd400000-0xfe8fffff]
[ 0.414427] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd13fffff pref]
[ 0.414428] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
[ 0.414430] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
[ 0.414431] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
[ 0.414433] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
[ 0.414434] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.414436] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.414437] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.414439] pci_bus 0000:04: resource 0 [io 0xc000-0xc0ff]
[ 0.414440] pci_bus 0000:04: resource 1 [io 0xc400-0xc4ff]
[ 0.414442] pci_bus 0000:04: resource 2 [mem 0xd4000000-0xd7ffffff pref]
[ 0.414443] pci_bus 0000:04: resource 3 [mem 0xd8000000-0xdbffffff]
[ 0.414567] NET: Registered protocol family 2
[ 0.414781] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.415068] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.415278] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.415313] TCP: reno registered
[ 0.415326] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.415364] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.415522] NET: Registered protocol family 1
[ 0.415537] pci 0000:00:01.0: Boot video device
[ 0.656229] PCI: CLS 64 bytes, default 64
[ 0.656273] Unpacking initramfs...
[ 0.817800] Freeing initrd memory: 10892k freed
[ 0.820285] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.820288] AMD-Vi: Extended features: PreF PPR GT IA
[ 0.820291] AMD-Vi: Interrupt remapping enabled
[ 0.820317] pci 0000:00:00.2: irq 40 for MSI/MSI-X
[ 0.827495] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.828030] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.828033] software IO TLB [mem 0x9985d000-0x9d85d000] (64MB) mapped at [ffff88009985d000-ffff88009d85cfff]
[ 0.828234] LVT offset 0 assigned for vector 0x400
[ 0.828258] perf: AMD IBS detected (0x000000ff)
[ 0.828434] audit: initializing netlink socket (disabled)
[ 0.828450] type=2000 audit(1364300511.640:1): initialized
[ 0.839212] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.839442] VFS: Disk quotas dquot_6.5.2
[ 0.839462] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.839530] msgmni has been set to 14775
[ 0.839744] alg: No test for stdrng (krng)
[ 0.839768] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.839770] io scheduler noop registered
[ 0.839771] io scheduler deadline registered
[ 0.839788] io scheduler cfq registered (default)
[ 0.839908] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.839921] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.839922] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.840178] GHES: HEST is not enabled!
[ 0.840313] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.860605] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.861031] Linux agpgart interface v0.103
[ 0.861111] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.861112] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.861285] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.861377] mousedev: PS/2 mouse device common for all mice
[ 0.861408] rtc_cmos 00:07: RTC can wake from S4
[ 0.861497] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.861518] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.861525] cpuidle: using governor ladder
[ 0.861526] cpuidle: using governor menu
[ 0.861550] drop_monitor: Initializing network drop monitor service
[ 0.861602] TCP: cubic registered
[ 0.861649] NET: Registered protocol family 10
[ 0.861795] mip6: Mobile IPv6
[ 0.861797] NET: Registered protocol family 17
[ 0.861809] Key type dns_resolver registered
[ 0.862081] PM: Hibernation image not present or could not be loaded.
[ 0.862088] registered taskstats version 1
[ 0.862459] rtc_cmos 00:07: setting system clock to 2013-03-26 12:21:52 UTC (1364300512)
[ 0.863364] Freeing unused kernel memory: 616k freed
[ 0.863478] Write protecting the kernel read-only data: 6144k
[ 0.864907] Freeing unused kernel memory: 496k freed
[ 0.866460] Freeing unused kernel memory: 572k freed
[ 0.877361] udevd[68]: starting version 175
[ 0.883030] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.890715] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.890923] r8169 0000:01:00.0: irq 41 for MSI/MSI-X
[ 0.891105] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c1a000, d4:3d:7e:53:cb:b8, XID 0c900800 IRQ 41
[ 0.891109] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.893939] ACPI: bus type usb registered
[ 0.894000] usbcore: registered new interface driver usbfs
[ 0.894014] usbcore: registered new interface driver hub
[ 0.894470] usbcore: registered new device driver usb
[ 0.894790] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.895548] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.895590] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.895597] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 0.895631] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb50000
[ 0.900745] SCSI subsystem initialized
[ 0.901709] ACPI: bus type scsi registered
[ 0.901763] libata version 3.00 loaded.
[ 0.955375] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.955379] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.955382] usb usb1: Product: OHCI Host Controller
[ 0.955383] usb usb1: Manufacturer: Linux 3.8.4 ohci_hcd
[ 0.955385] usb usb1: SerialNumber: 0000:00:12.0
[ 0.955510] hub 1-0:1.0: USB hub found
[ 0.955516] hub 1-0:1.0: 5 ports detected
[ 0.955628] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.955632] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.955649] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4e000
[ 1.015230] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.015234] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.015236] usb usb2: Product: OHCI Host Controller
[ 1.015238] usb usb2: Manufacturer: Linux 3.8.4 ohci_hcd
[ 1.015239] usb usb2: SerialNumber: 0000:00:13.0
[ 1.015369] hub 2-0:1.0: USB hub found
[ 1.015375] hub 2-0:1.0: 5 ports detected
[ 1.015497] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.015502] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 3
[ 1.015519] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4c000
[ 1.075055] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.075059] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.075062] usb usb3: Product: OHCI Host Controller
[ 1.075063] usb usb3: Manufacturer: Linux 3.8.4 ohci_hcd
[ 1.075065] usb usb3: SerialNumber: 0000:00:14.5
[ 1.075217] hub 3-0:1.0: USB hub found
[ 1.075223] hub 3-0:1.0: 2 ports detected
[ 1.075329] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.075335] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 1.075367] QUIRK: Enable AMD PLL fix
[ 1.075543] xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb4a000
[ 1.075608] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[ 1.075616] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 1.075624] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 1.075632] xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
[ 1.075639] xhci_hcd 0000:00:10.0: irq 46 for MSI/MSI-X
[ 1.075740] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.075743] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.075745] usb usb4: Product: xHCI Host Controller
[ 1.075747] usb usb4: Manufacturer: Linux 3.8.4 xhci_hcd
[ 1.075749] usb usb4: SerialNumber: 0000:00:10.0
[ 1.076064] xHCI xhci_add_endpoint called for root hub
[ 1.076067] xHCI xhci_check_bandwidth called for root hub
[ 1.076110] hub 4-0:1.0: USB hub found
[ 1.076117] hub 4-0:1.0: 2 ports detected
[ 1.076190] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.076194] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[ 1.078983] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.078987] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.078990] usb usb5: Product: xHCI Host Controller
[ 1.078992] usb usb5: Manufacturer: Linux 3.8.4 xhci_hcd
[ 1.078994] usb usb5: SerialNumber: 0000:00:10.0
[ 1.079093] xHCI xhci_add_endpoint called for root hub
[ 1.079095] xHCI xhci_check_bandwidth called for root hub
[ 1.079125] hub 5-0:1.0: USB hub found
[ 1.079131] hub 5-0:1.0: 2 ports detected
[ 1.103022] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.103029] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
[ 1.103235] xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb48000
[ 1.103296] xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
[ 1.103302] xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
[ 1.103308] xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
[ 1.103314] xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
[ 1.103321] xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
[ 1.103410] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.103412] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.103413] usb usb6: Product: xHCI Host Controller
[ 1.103415] usb usb6: Manufacturer: Linux 3.8.4 xhci_hcd
[ 1.103416] usb usb6: SerialNumber: 0000:00:10.1
[ 1.103585] xHCI xhci_add_endpoint called for root hub
[ 1.103587] xHCI xhci_check_bandwidth called for root hub
[ 1.103608] hub 6-0:1.0: USB hub found
[ 1.103614] hub 6-0:1.0: 2 ports detected
[ 1.103675] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.103678] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7
[ 1.106628] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.106630] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.106631] usb usb7: Product: xHCI Host Controller
[ 1.106633] usb usb7: Manufacturer: Linux 3.8.4 xhci_hcd
[ 1.106634] usb usb7: SerialNumber: 0000:00:10.1
[ 1.106784] xHCI xhci_add_endpoint called for root hub
[ 1.106785] xHCI xhci_check_bandwidth called for root hub
[ 1.106804] hub 7-0:1.0: USB hub found
[ 1.106810] hub 7-0:1.0: 2 ports detected
[ 1.126931] ahci 0000:00:11.0: version 3.0
[ 1.127017] ahci 0000:00:11.0: irq 52 for MSI/MSI-X
[ 1.127063] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 1.127067] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.127255] scsi0 : ahci
[ 1.127319] ata1: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 52
[ 1.350288] usb 2-2: new low-speed USB device number 2 using ohci_hcd
[ 1.516936] usb 2-2: New USB device found, idVendor=046d, idProduct=c05b
[ 1.516940] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.516942] usb 2-2: Product: USB Optical Mouse
[ 1.516944] usb 2-2: Manufacturer: Logitech
[ 1.524995] usbcore: registered new interface driver usbhid
[ 1.524999] usbhid: USB HID core driver
[ 1.526673] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input1
[ 1.526756] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-2/input0
[ 1.617561] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.618351] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM04B0Q, max UDMA/133
[ 1.618354] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.618770] ata1.00: configured for UDMA/133
[ 1.618895] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
[ 1.621401] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.621531] sd 0:0:0:0: [sda] Write Protect is off
[ 1.621534] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.621565] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.622035] sda: sda1 sda2 < sda5 >
[ 1.622394] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.623786] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.653379] usb 2-3: new full-speed USB device number 3 using ohci_hcd
[ 1.656313] PM: Starting manual resume from disk
[ 1.656317] PM: Hibernation image partition 8:5 present
[ 1.656318] PM: Looking for hibernation image.
[ 1.656508] PM: Image not found (code -22)
[ 1.656509] PM: Hibernation image not present or could not be loaded.
[ 1.671094] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.820023] usb 2-3: New USB device found, idVendor=1397, idProduct=00bc
[ 1.820027] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.820029] usb 2-3: Product: BCF2000
[ 1.820031] usb 2-3: Manufacturer: BEHRINGER
[ 1.820086] udevd[366]: starting version 175
[ 1.824907] tsc: Refined TSC clocksource calibration: 3392.618 MHz
[ 1.824912] Switching to clocksource tsc
[ 1.887750] hda-intel 0000:00:01.1: Force to non-snoop mode
[ 1.887800] snd_hda_intel 0000:00:01.1: irq 53 for MSI/MSI-X
[ 1.892004] cfg80211: Calling CRDA to update world regulatory domain
[ 1.895750] ACPI: acpi_idle registered with cpuidle
[ 1.896355] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.896362] ACPI: Power Button [PWRB]
[ 1.896985] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
[ 1.902058] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.902068] ACPI: Power Button [PWRF]
[ 1.904051] usbcore: registered new interface driver snd-usb-audio
[ 1.921143] ehci-pci: EHCI PCI platform driver
[ 1.930934] parport_pc 00:05: reported by Plug and Play ACPI
[ 1.930987] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 1.940507] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
[ 1.940542] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 1.940586] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 1.940624] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 1.941484] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 1.941540] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 1.941580] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 1.941614] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 1.951230] yenta_cardbus 0000:03:05.0: CardBus bridge found [0000:0000]
[ 1.964644] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 1.964753] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.964762] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 8
[ 1.964772] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.964784] ehci-pci 0000:00:12.2: debug port 1
[ 1.964816] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4f000
[ 1.965007] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 1.968349] microcode: CPU0: patch_level=0x06001119
[ 1.976474] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.976502] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.976505] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.976508] usb usb8: Product: EHCI Host Controller
[ 1.976510] usb usb8: Manufacturer: Linux 3.8.4 ehci_hcd
[ 1.976512] usb usb8: SerialNumber: 0000:00:12.2
[ 1.989185] hub 8-0:1.0: USB hub found
[ 1.989192] hub 8-0:1.0: 5 ports detected
[ 1.989371] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.989378] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 9
[ 1.989383] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.989409] ehci-pci 0000:00:13.2: debug port 1
[ 1.989458] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4d000
[ 1.989507] usb 2-2: USB disconnect, device number 2
[ 1.989715] wmi: Mapper loaded
[ 2.000409] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.000448] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.000453] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.000456] usb usb9: Product: EHCI Host Controller
[ 2.000458] usb usb9: Manufacturer: Linux 3.8.4 ehci_hcd
[ 2.000461] usb usb9: SerialNumber: 0000:00:13.2
[ 2.000770] hub 9-0:1.0: USB hub found
[ 2.000775] hub 9-0:1.0: 5 ports detected
[ 2.016236] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
[ 2.016285] microcode: CPU1: patch_level=0x06001119
[ 2.016294] microcode: CPU2: patch_level=0x06001119
[ 2.016300] microcode: CPU3: patch_level=0x06001119
[ 2.016360] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.023436] ath: EEPROM regdomain: 0x809c
[ 2.023440] ath: EEPROM indicates we should expect a country code
[ 2.023442] ath: doing EEPROM country->regdmn map search
[ 2.023444] ath: country maps to regdmn code: 0x52
[ 2.023446] ath: Country alpha2 being used: CN
[ 2.023448] ath: Regpair used: 0x52
[ 2.032018] cfg80211: World regulatory domain updated:
[ 2.032022] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.032025] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.032027] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.032029] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.032031] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.032034] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.035884] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 2.037463] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 2.037693] cfg80211: Calling CRDA for country: CN
[ 2.037893] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90010f20000, irq=17
[ 2.047141] cfg80211: Regulatory domain changed to country: CN
[ 2.047145] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.047148] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2.047150] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 2.050472] kvm: Nested Virtualization enabled
[ 2.050476] kvm: Nested Paging enabled
[ 2.051435] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.077009] yenta_cardbus 0000:03:05.0: ISA IRQ mask 0x0000, PCI irq 20
[ 2.077018] yenta_cardbus 0000:03:05.0: Socket status: 30000820
[ 2.077025] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 2.077041] yenta_cardbus 0000:03:05.0: pcmcia: parent PCI bridge window: [io 0xc000-0xdfff]
[ 2.077047] yenta_cardbus 0000:03:05.0: pcmcia: parent PCI bridge window: [mem 0xfd400000-0xfe8fffff]
[ 2.077053] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfd400000-0xfe8fffff:
[ 2.077073] excluding 0xfe7b0000-0xfe8fffff
[ 2.077081] yenta_cardbus 0000:03:05.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd13fffff pref]
[ 2.077086] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd13fffff:
[ 2.077108] excluding 0xd0000000-0xd13fffff
[ 2.086548] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 2.086563] excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 2.086610] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 2.086632] excluding 0xa0000000-0xa0ffffff
[ 2.086661] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 2.086681] excluding 0x60000000-0x60ffffff
[ 2.167984] usb 2-3: USB disconnect, device number 3
[ 2.437978] Adding 10157052k swap on /dev/sda5. Priority:-1 extents:1 across:10157052k SS
[ 2.464994] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 2.519962] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.560422] [drm] Initialized drm 1.1.0 20060810
[ 2.575509] [drm] radeon kernel modesetting enabled.
[ 2.575872] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9901 0x1462:0x7721).
[ 2.576460] [drm] register mmio base: 0xFEB00000
[ 2.576465] [drm] register mmio size: 262144
[ 2.576716] ATOM BIOS: 113
[ 2.576751] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 2.576761] radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 2.577850] [drm] Detected VRAM RAM=512M, BAR=256M
[ 2.577857] [drm] RAM width 64bits DDR
[ 2.577975] [TTM] Zone kernel: Available graphics memory: 3783278 kiB
[ 2.577981] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.577986] [TTM] Initializing pool allocator
[ 2.578003] [TTM] Initializing DMA pool allocator
[ 2.578055] [drm] radeon: 512M of VRAM memory ready
[ 2.578062] [drm] radeon: 512M of GTT memory ready.
[ 2.578107] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.578112] [drm] Driver supports precise vblank timestamp query.
[ 2.578173] radeon 0000:00:01.0: irq 54 for MSI/MSI-X
[ 2.578190] radeon 0000:00:01.0: radeon: using MSI.
[ 2.578482] [drm] radeon: irq initialized.
[ 2.578497] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.580044] [drm] Loading ARUBA Microcode
[ 2.607579] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 2.607698] radeon 0000:00:01.0: WB enabled
[ 2.607701] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880234c70c00
[ 2.607704] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff880234c70c04
[ 2.607707] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff880234c70c08
[ 2.607709] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880234c70c0c
[ 2.607711] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff880234c70c10
[ 2.626722] [drm] ring test on 0 succeeded in 2 usecs
[ 2.626784] [drm] ring test on 3 succeeded in 2 usecs
[ 2.626792] [drm] ring test on 4 succeeded in 1 usecs
[ 2.642632] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.643156] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.643682] [drm] ib test on ring 4 succeeded in 1 usecs
[ 2.644764] [drm] Radeon Display Connectors
[ 2.644767] [drm] Connector 0:
[ 2.644769] [drm] HDMI-A-1
[ 2.644771] [drm] HPD1
[ 2.644775] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 2.644778] [drm] Encoders:
[ 2.644780] [drm] DFP1: INTERNAL_UNIPHY2
[ 2.644782] [drm] Connector 1:
[ 2.644783] [drm] VGA-1
[ 2.644785] [drm] HPD2
[ 2.644787] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 2.644789] [drm] Encoders:
[ 2.644790] [drm] CRT1: INTERNAL_UNIPHY2
[ 2.644792] [drm] CRT1: NUTMEG
[ 2.644794] [drm] Connector 2:
[ 2.644795] [drm] DVI-D-1
[ 2.644798] [drm] HPD3
[ 2.644800] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 2.644803] [drm] Encoders:
[ 2.644805] [drm] DFP2: INTERNAL_UNIPHY
[ 2.695847] [drm] Internal thermal controller without fan control
[ 2.695882] [drm] radeon: power management initialized
[ 2.854110] usb 2-2: new low-speed USB device number 4 using ohci_hcd
[ 2.857121] [drm] fb mappable at 0xC114C000
[ 2.857124] [drm] vram apper at 0xC0000000
[ 2.857125] [drm] size 3145728
[ 2.857127] [drm] fb depth is 24
[ 2.857128] [drm] pitch is 4096
[ 2.857195] fbcon: radeondrmfb (fb0) is primary device
[ 2.965765] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 2.965790] pci 0000:04:00.0: [10ee:3fc5] type 00 class 0x040100
[ 2.965822] pci 0000:04:00.0: reg 10: [mem 0x00000000-0x0000ffff]
[ 2.965958] pci 0000:04:00.0: BAR 0: assigned [mem 0xd8000000-0xd800ffff]
[ 2.965980] pci 0000:04:00.0: cache line size of 64 is not supported
[ 2.971776] snd_hdsp 0000:04:00.0: enabling device (0000 -> 0002)
[ 2.995389] Console: switching to colour frame buffer device 128x48
[ 2.999996] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 3.000001] radeon 0000:00:01.0: registered panic notifier
[ 3.000011] [drm] Initialized radeon 2.29.0 20080528 for 0000:00:01.0 on minor 0
[ 3.021300] loop: module loaded
[ 3.024677] usb 2-2: New USB device found, idVendor=046d, idProduct=c05b
[ 3.024689] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.024698] usb 2-2: Product: USB Optical Mouse
[ 3.024705] usb 2-2: Manufacturer: Logitech
[ 3.032084] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input14
[ 3.032318] hid-generic 0003:046D:C05B.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-2/input0
[ 3.292939] usb 2-3: new full-speed USB device number 5 using ohci_hcd
[ 3.459482] usb 2-3: New USB device found, idVendor=1397, idProduct=00bc
[ 3.459491] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.459497] usb 2-3: Product: BCF2000
[ 3.459501] usb 2-3: Manufacturer: BEHRINGER
[ 3.483105] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4.267109] wlan0: authenticate with 00:12:bf:b5:6c:86
[ 4.274427] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[ 4.282551] wlan0: send auth to 00:12:bf:b5:6c:86 (try 1/3)
[ 4.285132] wlan0: authenticated
[ 4.286186] wlan0: associate with 00:12:bf:b5:6c:86 (try 1/3)
[ 4.300479] wlan0: RX AssocResp from 00:12:bf:b5:6c:86 (capab=0x431 status=0 aid=4)
[ 4.300565] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4.300664] wlan0: associated
[ 5.518827] Hammerfall-DSP: Firmware already present, initializing card.
[ 8.284298] RPC: Registered named UNIX socket transport module.
[ 8.284305] RPC: Registered udp transport module.
[ 8.284309] RPC: Registered tcp transport module.
[ 8.284313] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.289970] FS-Cache: Loaded
[ 8.298636] FS-Cache: Netfs 'nfs' registered for caching
[ 8.308344] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 8.986049] Bluetooth: Core ver 2.16
[ 8.986067] NET: Registered protocol family 31
[ 8.986069] Bluetooth: HCI device and connection manager initialized
[ 8.986078] Bluetooth: HCI socket layer initialized
[ 8.986081] Bluetooth: L2CAP socket layer initialized
[ 8.986087] Bluetooth: SCO socket layer initialized
[ 8.990950] Bluetooth: RFCOMM TTY layer initialized
[ 8.990963] Bluetooth: RFCOMM socket layer initialized
[ 8.990964] Bluetooth: RFCOMM ver 1.11
[ 8.992129] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.992132] Bluetooth: BNEP filters: protocol multicast
[ 8.992138] Bluetooth: BNEP socket layer initialized
[ 9.166721] r8169 0000:01:00.0 eth0: link down
[ 9.166774] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: soundcard (dma) stopped working with commit 27c2127 (x86/amd-iommu: Use only per-device dma_ops)
[not found] ` <CAHccUr+w1_65uBXLcmZLrPOgbC8Ldk8+PKxaRLv03rBYxBRDkg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2013-03-26 14:23 ` Joerg Roedel
[not found] ` <20130326142336.GE13035-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 10+ messages in thread
From: Joerg Roedel @ 2013-03-26 14:23 UTC (permalink / raw)
To: Andreas Degert; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Hi Andreas,
thanks for the information.
On Tue, Mar 26, 2013 at 01:48:38PM +0100, Andreas Degert wrote:
> seems to be this (additionaly I have appended the full dump):
>
> device: 00:00.2 cap: 0040 seg: 0 flags: fe info 1300
> mmio-addr: 00000000feb80000
> DEV_SELECT_RANGE_START devid: 00:01.0 flags: 00
> DEV_RANGE_END devid: ff:1f.6
> DEV_ALIAS_RANGE devid: 03:00.0 flags: 00 devid_to: 00:14.4
> DEV_RANGE_END devid: 04:1f.7
> DEV_SPECIAL(HPET[0]) devid: 00:14.0
> DEV_SPECIAL(IOAPIC[5]) devid: 00:14.0
That looks good so far. You have two sound devices:
One in the GPU at 00:01.1
One in the SB at 00:14.2
Both are covered by the above IVRS entries. Does a unpatched kernel (no
rt patch) work for you, so can you try if it also happens with 3.8.4?
So you see IO_PAGE_FAULTS when trying to use the soundcard?
Thanks,
Joerg
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: soundcard (dma) stopped working with commit 27c2127 (x86/amd-iommu: Use only per-device dma_ops)
[not found] ` <20130326142336.GE13035-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2013-03-26 15:20 ` Andreas Degert
[not found] ` <CAHccUrKmtjqBZVb1+1O5c4j6_9Er5Ow4tPRhExCW-g_kaV1-3A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 10+ messages in thread
From: Andreas Degert @ 2013-03-26 15:20 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
2013/3/26 Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>:
> Hi Andreas,
>
> thanks for the information.
>
> On Tue, Mar 26, 2013 at 01:48:38PM +0100, Andreas Degert wrote:
>> seems to be this (additionaly I have appended the full dump):
>>
>> device: 00:00.2 cap: 0040 seg: 0 flags: fe info 1300
>> mmio-addr: 00000000feb80000
>> DEV_SELECT_RANGE_START devid: 00:01.0 flags: 00
>> DEV_RANGE_END devid: ff:1f.6
>> DEV_ALIAS_RANGE devid: 03:00.0 flags: 00 devid_to: 00:14.4
>> DEV_RANGE_END devid: 04:1f.7
>> DEV_SPECIAL(HPET[0]) devid: 00:14.0
>> DEV_SPECIAL(IOAPIC[5]) devid: 00:14.0
>
> That looks good so far. You have two sound devices:
>
> One in the GPU at 00:01.1
> One in the SB at 00:14.2
>
> Both are covered by the above IVRS entries.
There is a third sound device:
04:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall
DSP (rev 35)
(at the end of the lspci listing in my first mail). This is the one that doesn't
work, it's connected via cardbus (yenta driver), so it appears a bit further
down in the dmesg output.
> Does a unpatched kernel (no > rt patch) work for you, so can you try
> if it also happens with 3.8.4?
Yes, I started seeing the problem in 3.2 (in Debian wheezy),
then found the commit which made the difference in 3.0-rc3
by bisecting. Happens also in unpatched 3.8.4.
> So you see IO_PAGE_FAULTS when trying to use the soundcard?
No io page faults, just reading zeros when recording and silence on
playback.. (I'll double check later today for any dmesg output while
using the soundcard.)
Thanks,
Andreas
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: soundcard (dma) stopped working with commit 27c2127 (x86/amd-iommu: Use only per-device dma_ops)
[not found] ` <CAHccUrKmtjqBZVb1+1O5c4j6_9Er5Ow4tPRhExCW-g_kaV1-3A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2013-03-26 16:11 ` Joerg Roedel
[not found] ` <20130326161132.GF2727-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 10+ messages in thread
From: Joerg Roedel @ 2013-03-26 16:11 UTC (permalink / raw)
To: Andreas Degert; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
[-- Attachment #1: Type: text/plain, Size: 643 bytes --]
On Tue, Mar 26, 2013 at 04:20:54PM +0100, Andreas Degert wrote:
> There is a third sound device:
>
> 04:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall
> DSP (rev 35)
>
> (at the end of the lspci listing in my first mail). This is the one that doesn't
> work, it's connected via cardbus (yenta driver), so it appears a bit further
> down in the dmesg output.
Ah, I see. But still, this device is in the alias range and thus also
covered by IVRS. It should use 00:14.4 as the request-id.
Can you try the attached debug-patch, boot and send me dmesg again? This
should sched some light onto the problem.
Thanks,
Joerg
[-- Attachment #2: iommu-debug.patch --]
[-- Type: text/x-diff, Size: 2838 bytes --]
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index c1c74e0..b96af8a 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -244,21 +244,29 @@ static bool check_device(struct device *dev)
{
u16 devid;
- if (!dev || !dev->dma_mask)
+ if (!dev || !dev->dma_mask) {
+ pr_err("AMD-Vi: Device %s has no dma_mask\n", dev_name(dev));
return false;
+ }
/* No device or no PCI device */
- if (dev->bus != &pci_bus_type)
+ if (dev->bus != &pci_bus_type) {
+ pr_err("AMD-Vi: Device %s is not PCI\n", dev_name(dev));
return false;
+ }
devid = get_device_id(dev);
/* Out of our scope? */
- if (devid > amd_iommu_last_bdf)
+ if (devid > amd_iommu_last_bdf) {
+ pr_err("AMD-Vi: Device %s is out of range\n", dev_name(dev));
return false;
+ }
- if (amd_iommu_rlookup_table[devid] == NULL)
+ if (amd_iommu_rlookup_table[devid] == NULL) {
+ pr_err("AMD-Vi: Device %s has no responsible IOMMU\n", dev_name(dev));
return false;
+ }
return true;
}
@@ -2448,6 +2456,8 @@ static int device_change_notifier(struct notifier_block *nb,
break;
case BUS_NOTIFY_ADD_DEVICE:
+ pr_info("AMD-Vi: Adding device %s\n", dev_name(dev));
+
iommu_init_device(dev);
/*
@@ -2457,6 +2467,7 @@ static int device_change_notifier(struct notifier_block *nb,
dev_data = get_dev_data(dev);
if (iommu_pass_through || dev_data->iommu_v2) {
+ pr_info("AMD-Vi: Using pt-domain for %s\n", dev_name(dev));
dev_data->passthrough = true;
attach_device(dev, pt_domain);
break;
@@ -2466,11 +2477,15 @@ static int device_change_notifier(struct notifier_block *nb,
/* allocate a protection domain if a device is added */
dma_domain = find_protection_domain(devid);
- if (dma_domain)
+ if (dma_domain) {
+ pr_info("AMD-Vi: Already dma_domain for %s\n", dev_name(dev));
goto out;
+ }
dma_domain = dma_ops_domain_alloc();
- if (!dma_domain)
+ if (!dma_domain) {
+ pr_info("AMD-Vi: Can't alloc dma_domain for %s\n", dev_name(dev));
goto out;
+ }
dma_domain->target_dev = devid;
spin_lock_irqsave(&iommu_pd_list_lock, flags);
@@ -2484,6 +2499,8 @@ static int device_change_notifier(struct notifier_block *nb,
break;
case BUS_NOTIFY_DEL_DEVICE:
+ pr_info("AMD-Vi: Removing device %s\n", dev_name(dev));
+
iommu_uninit_device(dev);
default:
@@ -3122,10 +3139,13 @@ static unsigned device_dma_ops_init(void)
dev_data = get_dev_data(&pdev->dev);
- if (!dev_data->passthrough)
+ if (!dev_data->passthrough) {
+ pr_info("AMD-Vi: Initializing %s to amd_iommu_dma_ops\n", dev_name(&pdev->dev));
pdev->dev.archdata.dma_ops = &amd_iommu_dma_ops;
- else
+ } else {
+ pr_info("AMD-Vi: Initializing %s to nommu_dma_ops\n", dev_name(&pdev->dev));
pdev->dev.archdata.dma_ops = &nommu_dma_ops;
+ }
}
return unhandled;
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: soundcard (dma) stopped working with commit 27c2127 (x86/amd-iommu: Use only per-device dma_ops)
[not found] ` <20130326161132.GF2727-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2013-03-26 19:40 ` Andreas Degert
[not found] ` <CAHccUrKpMiY4DURL_V2fPD8anz3T8WQT2_0PABu87mCzokpaWA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 10+ messages in thread
From: Andreas Degert @ 2013-03-26 19:40 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
[-- Attachment #1: Type: text/plain, Size: 554 bytes --]
2013/3/26 Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>:
> Ah, I see. But still, this device is in the alias range and thus also
> covered by IVRS. It should use 00:14.4 as the request-id.
>
> Can you try the attached debug-patch, boot and send me dmesg again? This
> should sched some light onto the problem.
dmesg output appended. I was wrong, there are io page faults
when I trigger dma transfer with the soundcard, like you expected.
At the end of the dmesg output are the IO_PAGE_FAULT's from
trying to do a playback.
thanks
Andreas
[-- Attachment #2: dmesg_amd_iommu_debug.txt --]
[-- Type: text/plain, Size: 63083 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.4iommu (root@phonus) (gcc version 4.7.2 (Debian 4.7.2-5) ) #5 SMP PREEMPT Tue Mar 26 19:00:19 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.4iommu root=UUID=6777b7d9-06b6-4cc8-9bdb-105e3cec9c26 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d85cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d85d000-0x000000009db3cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009db3d000-0x000000009ddfcfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ddfd000-0x000000009dea0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009dea1000-0x000000009ea49fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ea4a000-0x000000009ea4afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ea4b000-0x000000009ec50fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009ec51000-0x000000009f072fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f073000-0x000000009f7f3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f7f4000-0x000000009f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: MSI MS-7721/FM2-A75MA-E35 (MS-7721), BIOS V1.8 02/27/2013
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 00009F800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0x9f800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x9f7fffff]
[ 0.000000] [mem 0x00000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9f7fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x9f7fffff @ [mem 0x1fffe000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x23effffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
[ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
[ 0.000000] [mem 0x200000000-0x23effffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x23effffff @ [mem 0x9f7fc000-0x9f7fffff]
[ 0.000000] RAMDISK: [mem 0x36ae0000-0x37567fff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 000000009de8e078 0006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 000000009de94320 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)
[ 0.000000] ACPI: DSDT 000000009de8e178 061A4 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 000000009de96080 00040
[ 0.000000] ACPI: APIC 000000009de94430 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 000000009de944a8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 000000009de944f0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 000000009de94530 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 000000009de94568 00D40 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 000000009de952a8 004B7 (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: IVRS 000000009de95760 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
[ 0.000000] ACPI: CRAT 000000009de957d0 002F8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23effffff]
[ 0.000000] NODE_DATA [mem 0x23effc000-0x23effffff]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880236e00000-ffff88023d7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x9d85cfff]
[ 0.000000] node 0: [mem 0x9db3d000-0x9ddfcfff]
[ 0.000000] node 0: [mem 0x9ea4a000-0x9ea4afff]
[ 0.000000] node 0: [mem 0x9ec51000-0x9f072fff]
[ 0.000000] node 0: [mem 0x9f7f4000-0x9f7fffff]
[ 0.000000] node 0: [mem 0x100001000-0x23effffff]
[ 0.000000] On node 0 totalpages: 1953497
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8790 pages used for memmap
[ 0.000000] DMA32 zone: 634102 pages, LIFO batch:31
[ 0.000000] Normal zone: 17864 pages used for memmap
[ 0.000000] Normal zone: 1288759 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009d85d000 - 000000009db3d000
[ 0.000000] PM: Registered nosave memory: 000000009ddfd000 - 000000009dea1000
[ 0.000000] PM: Registered nosave memory: 000000009dea1000 - 000000009ea4a000
[ 0.000000] PM: Registered nosave memory: 000000009ea4b000 - 000000009ec51000
[ 0.000000] PM: Registered nosave memory: 000000009f073000 - 000000009f7f4000
[ 0.000000] PM: Registered nosave memory: 000000009f800000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[ 0.000000] e820: [mem 0x9f800000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023ec00000 s84032 r8192 d22464 u524288
[ 0.000000] pcpu-alloc: s84032 r8192 d22464 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1926781
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.4iommu root=UUID=6777b7d9-06b6-4cc8-9bdb-105e3cec9c26 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 94000000
[ 0.000000] PM: Registered nosave memory: 0000000094000000 - 0000000098000000
[ 0.000000] Memory: 7554080k/9420800k available (3591k kernel code, 1606812k absent, 259908k reserved, 3147k data, 616k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3392.459 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.91 BogoMIPS (lpj=13569836)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000032] Security Framework initialized
[ 0.000035] AppArmor: AppArmor disabled by boot time parameter
[ 0.000476] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002433] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003335] Mount-cache hash table entries: 256
[ 0.003474] Initializing cgroup subsys cpuacct
[ 0.003476] Initializing cgroup subsys devices
[ 0.003477] Initializing cgroup subsys freezer
[ 0.003479] Initializing cgroup subsys net_cls
[ 0.003480] Initializing cgroup subsys blkio
[ 0.003481] Initializing cgroup subsys perf_event
[ 0.003504] tseg: 009f800000
[ 0.003505] CPU: Physical Processor ID: 0
[ 0.003506] CPU: Processor Core ID: 0
[ 0.003508] mce: CPU supports 7 MCE banks
[ 0.003520] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.003520] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.003520] tlb_flushall_shift: 5
[ 0.003579] Freeing SMP alternatives: 8k freed
[ 0.003785] ACPI: Core revision 20121018
[ 0.099616] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.139192] smpboot: CPU0: AMD A10-5700 APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
[ 0.246346] Performance Events:
[ 0.246347] perf: AMD core performance counters detected
[ 0.246350] AMD PMU driver.
[ 0.246352] ... version: 0
[ 0.246353] ... bit width: 48
[ 0.246354] ... generic registers: 6
[ 0.246355] ... value mask: 0000ffffffffffff
[ 0.246356] ... max period: 00007fffffffffff
[ 0.246357] ... fixed-purpose events: 0
[ 0.246358] ... event mask: 000000000000003f
[ 0.270489] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.278439] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.331336] Brought up 4 CPUs
[ 0.331339] smpboot: Total of 4 processors activated (27139.67 BogoMIPS)
[ 0.332231] devtmpfs: initialized
[ 0.334486] PM: Registering ACPI NVS region [mem 0x9ddfd000-0x9dea0fff] (671744 bytes)
[ 0.334503] PM: Registering ACPI NVS region [mem 0x9ea4b000-0x9ec50fff] (2121728 bytes)
[ 0.334643] regulator-dummy: no parameters
[ 0.334701] NET: Registered protocol family 16
[ 0.334835] ACPI: bus type pci registered
[ 0.334881] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.334883] PCI: not using MMCONFIG
[ 0.334885] PCI: Using configuration type 1 for base access
[ 0.334886] PCI: Using configuration type 1 for extended access
[ 0.335600] bio: create slab <bio-0> at 0
[ 0.335689] ACPI: Added _OSI(Module Device)
[ 0.335691] ACPI: Added _OSI(Processor Device)
[ 0.335693] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.335694] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.336365] ACPI: EC: Look up EC in DSDT
[ 0.337155] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.339948] ACPI: Interpreter enabled
[ 0.339951] ACPI: (supports S0 S3 S4 S5)
[ 0.339967] ACPI: Using IOAPIC for interrupt routing
[ 0.340084] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.340117] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.375915] ACPI: No dock devices found.
[ 0.375920] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.376063] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.376065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.376364] pci_root PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[ 0.376493] pci_root PNP0A03:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.376694] PCI host bridge to bus 0000:00
[ 0.376697] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.376699] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.376701] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.376702] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.376704] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.376706] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.376707] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.376709] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.376716] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.376744] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
[ 0.376795] pci 0000:00:01.0: [1002:9901] type 00 class 0x030000
[ 0.376801] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.376806] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
[ 0.376811] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.376841] pci 0000:00:01.0: supports D1 D2
[ 0.376854] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.376860] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
[ 0.376896] pci 0000:00:01.1: supports D1 D2
[ 0.376913] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 0.376947] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.376962] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[ 0.376997] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.377032] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[ 0.377049] pci 0000:00:10.0: reg 10: [mem 0xfeb4a000-0xfeb4bfff 64bit]
[ 0.377136] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.377172] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
[ 0.377189] pci 0000:00:10.1: reg 10: [mem 0xfeb48000-0xfeb49fff 64bit]
[ 0.377276] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.377309] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.377324] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
[ 0.377331] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
[ 0.377339] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
[ 0.377346] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
[ 0.377354] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
[ 0.377361] pci 0000:00:11.0: reg 24: [mem 0xfeb51000-0xfeb517ff]
[ 0.377408] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.377419] pci 0000:00:12.0: reg 10: [mem 0xfeb50000-0xfeb50fff]
[ 0.377476] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.377490] pci 0000:00:12.2: reg 10: [mem 0xfeb4f000-0xfeb4f0ff]
[ 0.377555] pci 0000:00:12.2: supports D1 D2
[ 0.377557] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.377576] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.377587] pci 0000:00:13.0: reg 10: [mem 0xfeb4e000-0xfeb4efff]
[ 0.377645] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.377660] pci 0000:00:13.2: reg 10: [mem 0xfeb4d000-0xfeb4d0ff]
[ 0.377724] pci 0000:00:13.2: supports D1 D2
[ 0.377726] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.377745] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.377806] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.377823] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.377874] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.377887] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.377948] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.377996] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 0.378007] pci 0000:00:14.5: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
[ 0.378071] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.378087] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.378102] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.378117] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.378136] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.378151] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.378207] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.378219] pci 0000:01:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.378238] pci 0000:01:00.0: reg 18: [mem 0xfea04000-0xfea04fff 64bit pref]
[ 0.378251] pci 0000:01:00.0: reg 20: [mem 0xfea00000-0xfea03fff 64bit pref]
[ 0.378304] pci 0000:01:00.0: supports D1 D2
[ 0.378305] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.386045] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.386052] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.386055] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.386102] pci 0000:02:00.0: [168c:002e] type 00 class 0x028000
[ 0.386120] pci 0000:02:00.0: reg 10: [mem 0xfe900000-0xfe90ffff 64bit]
[ 0.386196] pci 0000:02:00.0: supports D1
[ 0.386198] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.394021] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.394028] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.394067] pci 0000:03:05.0: [1180:0475] type 02 class 0x060700
[ 0.394086] pci 0000:03:05.0: reg 10: [mem 0xfe800000-0xfe800fff]
[ 0.394118] pci 0000:03:05.0: supports D1 D2
[ 0.394120] pci 0000:03:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.394162] pci 0000:00:14.4: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.394166] pci 0000:00:14.4: bridge window [io 0xc000-0xdfff]
[ 0.394169] pci 0000:00:14.4: bridge window [mem 0xfd400000-0xfe8fffff]
[ 0.394173] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd13fffff pref]
[ 0.394175] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.394176] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.394178] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.394180] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.394182] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.394183] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.394185] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.394217] pci_bus 0000:04: busn_res: can not insert [bus 04-ff] under [bus 03-04] (conflicts with (null) [bus 03-04])
[ 0.394221] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 07
[ 0.394223] pci_bus 0000:04: busn_res: can not insert [bus 04-07] under [bus 03-04] (conflicts with (null) [bus 03-04])
[ 0.394227] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:03 [bus 03-04]
[ 0.394260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.394339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
[ 0.394363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC03._PRT]
[ 0.394387] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.399443] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.399497] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.399551] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.399602] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.399643] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.399675] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.399706] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.399737] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.399816] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.399821] vgaarb: loaded
[ 0.399822] vgaarb: bridge control possible 0000:00:01.0
[ 0.399857] PCI: Using ACPI for IRQ routing
[ 0.406561] PCI: pci_cache_line_size set to 64 bytes
[ 0.406619] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.406621] e820: reserve RAM buffer [mem 0x9d85d000-0x9fffffff]
[ 0.406623] e820: reserve RAM buffer [mem 0x9ddfd000-0x9fffffff]
[ 0.406624] e820: reserve RAM buffer [mem 0x9ea4b000-0x9fffffff]
[ 0.406626] e820: reserve RAM buffer [mem 0x9f073000-0x9fffffff]
[ 0.406627] e820: reserve RAM buffer [mem 0x9f800000-0x9fffffff]
[ 0.406628] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.406715] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.406718] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.408735] Switching to clocksource hpet
[ 0.410360] pnp: PnP ACPI init
[ 0.410371] ACPI: bus type pnp registered
[ 0.410451] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.410454] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.410863] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.410865] system 00:01: [io 0x040b] has been reserved
[ 0.410867] system 00:01: [io 0x04d6] has been reserved
[ 0.410869] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.410871] system 00:01: [io 0x0c14] has been reserved
[ 0.410873] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.410875] system 00:01: [io 0x0c52] has been reserved
[ 0.410877] system 00:01: [io 0x0c6c] has been reserved
[ 0.410879] system 00:01: [io 0x0c6f] has been reserved
[ 0.410881] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.410883] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.410885] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.410887] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.410890] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.410891] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.410893] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.410895] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.410897] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.410899] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.410902] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.410904] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.410907] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.410909] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.410911] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.410913] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.410916] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[ 0.410918] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411021] system 00:02: [io 0x0a00-0x0a1f] has been reserved
[ 0.411023] system 00:02: [io 0x0600-0x060f] has been reserved
[ 0.411026] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411075] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.411298] pnp 00:04: [dma 0 disabled]
[ 0.411332] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.411568] pnp 00:05: [dma 3]
[ 0.411654] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.411663] pnp 00:06: [dma 4]
[ 0.411678] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.411703] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.411722] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.411765] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.411767] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411792] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.411821] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411933] system 00:0c: [mem 0xa0000000-0xbfffffff] has been reserved
[ 0.411935] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411998] system 00:0d: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.412000] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.412125] pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.412128] pnp: PnP ACPI: found 15 devices
[ 0.412129] ACPI: ACPI bus type pnp unregistered
[ 0.418361] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.418364] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.418367] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.418371] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.418374] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.418380] pci 0000:03:05.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.418382] pci 0000:03:05.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.418384] pci 0000:03:05.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.418386] pci 0000:03:05.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.418390] pci 0000:03:05.0: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref]
[ 0.418393] pci 0000:03:05.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff]
[ 0.418395] pci 0000:03:05.0: BAR 13: assigned [io 0xc000-0xc0ff]
[ 0.418397] pci 0000:03:05.0: BAR 14: assigned [io 0xc400-0xc4ff]
[ 0.418399] pci 0000:03:05.0: CardBus bridge to [bus 04-07]
[ 0.418400] pci 0000:03:05.0: bridge window [io 0xc000-0xc0ff]
[ 0.418404] pci 0000:03:05.0: bridge window [io 0xc400-0xc4ff]
[ 0.418408] pci 0000:03:05.0: bridge window [mem 0xd4000000-0xd7ffffff pref]
[ 0.418412] pci 0000:03:05.0: bridge window [mem 0xd8000000-0xdbffffff]
[ 0.418416] pci 0000:00:14.4: PCI bridge to [bus 03-04]
[ 0.418419] pci 0000:00:14.4: bridge window [io 0xc000-0xdfff]
[ 0.418423] pci 0000:00:14.4: bridge window [mem 0xfd400000-0xfe8fffff]
[ 0.418426] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd13fffff pref]
[ 0.418463] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.418465] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.418466] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.418468] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.418470] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.418471] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.418473] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.418474] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.418476] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.418477] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.418479] pci_bus 0000:03: resource 0 [io 0xc000-0xdfff]
[ 0.418480] pci_bus 0000:03: resource 1 [mem 0xfd400000-0xfe8fffff]
[ 0.418482] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd13fffff pref]
[ 0.418483] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
[ 0.418485] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
[ 0.418486] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
[ 0.418487] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
[ 0.418489] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.418490] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.418492] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.418493] pci_bus 0000:04: resource 0 [io 0xc000-0xc0ff]
[ 0.418495] pci_bus 0000:04: resource 1 [io 0xc400-0xc4ff]
[ 0.418496] pci_bus 0000:04: resource 2 [mem 0xd4000000-0xd7ffffff pref]
[ 0.418498] pci_bus 0000:04: resource 3 [mem 0xd8000000-0xdbffffff]
[ 0.418624] NET: Registered protocol family 2
[ 0.418838] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.419123] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.419333] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.419367] TCP: reno registered
[ 0.419380] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.419418] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.419576] NET: Registered protocol family 1
[ 0.419590] pci 0000:00:01.0: Boot video device
[ 0.660241] PCI: CLS 64 bytes, default 64
[ 0.660286] Unpacking initramfs...
[ 0.820404] Freeing initrd memory: 10784k freed
[ 0.822732] AMD-Vi: Device 0000:00:00.2 has no responsible IOMMU
[ 0.822865] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.822866] AMD-Vi: Extended features: PreF PPR GT IA
[ 0.822869] AMD-Vi: Interrupt remapping enabled
[ 0.822895] pci 0000:00:00.2: irq 40 for MSI/MSI-X
[ 0.823605] AMD-Vi: Device 0000:00:00.2 has no responsible IOMMU
[ 0.830052] AMD-Vi: Initializing 0000:00:00.0 to amd_iommu_dma_ops
[ 0.830055] AMD-Vi: Device 0000:00:00.2 has no responsible IOMMU
[ 0.830087] AMD-Vi: Initializing 0000:00:01.0 to amd_iommu_dma_ops
[ 0.830088] AMD-Vi: Initializing 0000:00:01.1 to amd_iommu_dma_ops
[ 0.830090] AMD-Vi: Initializing 0000:00:04.0 to amd_iommu_dma_ops
[ 0.830091] AMD-Vi: Initializing 0000:00:05.0 to amd_iommu_dma_ops
[ 0.830092] AMD-Vi: Initializing 0000:00:10.0 to amd_iommu_dma_ops
[ 0.830093] AMD-Vi: Initializing 0000:00:10.1 to amd_iommu_dma_ops
[ 0.830095] AMD-Vi: Initializing 0000:00:11.0 to amd_iommu_dma_ops
[ 0.830096] AMD-Vi: Initializing 0000:00:12.0 to amd_iommu_dma_ops
[ 0.830097] AMD-Vi: Initializing 0000:00:12.2 to amd_iommu_dma_ops
[ 0.830098] AMD-Vi: Initializing 0000:00:13.0 to amd_iommu_dma_ops
[ 0.830100] AMD-Vi: Initializing 0000:00:13.2 to amd_iommu_dma_ops
[ 0.830101] AMD-Vi: Initializing 0000:00:14.0 to amd_iommu_dma_ops
[ 0.830102] AMD-Vi: Initializing 0000:00:14.2 to amd_iommu_dma_ops
[ 0.830103] AMD-Vi: Initializing 0000:00:14.3 to amd_iommu_dma_ops
[ 0.830105] AMD-Vi: Initializing 0000:00:14.4 to amd_iommu_dma_ops
[ 0.830106] AMD-Vi: Initializing 0000:00:14.5 to amd_iommu_dma_ops
[ 0.830107] AMD-Vi: Initializing 0000:00:18.0 to amd_iommu_dma_ops
[ 0.830108] AMD-Vi: Initializing 0000:00:18.1 to amd_iommu_dma_ops
[ 0.830109] AMD-Vi: Initializing 0000:00:18.2 to amd_iommu_dma_ops
[ 0.830110] AMD-Vi: Initializing 0000:00:18.3 to amd_iommu_dma_ops
[ 0.830111] AMD-Vi: Initializing 0000:00:18.4 to amd_iommu_dma_ops
[ 0.830112] AMD-Vi: Initializing 0000:00:18.5 to amd_iommu_dma_ops
[ 0.830113] AMD-Vi: Initializing 0000:01:00.0 to amd_iommu_dma_ops
[ 0.830114] AMD-Vi: Initializing 0000:02:00.0 to amd_iommu_dma_ops
[ 0.830115] AMD-Vi: Initializing 0000:03:05.0 to amd_iommu_dma_ops
[ 0.830116] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.830585] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.830588] software IO TLB [mem 0x9985d000-0x9d85d000] (64MB) mapped at [ffff88009985d000-ffff88009d85cfff]
[ 0.830795] LVT offset 0 assigned for vector 0x400
[ 0.830819] perf: AMD IBS detected (0x000000ff)
[ 0.830996] audit: initializing netlink socket (disabled)
[ 0.831013] type=2000 audit(1364323805.636:1): initialized
[ 0.841919] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.842150] VFS: Disk quotas dquot_6.5.2
[ 0.842170] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.842239] msgmni has been set to 14775
[ 0.842441] alg: No test for stdrng (krng)
[ 0.842465] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.842466] io scheduler noop registered
[ 0.842467] io scheduler deadline registered
[ 0.842485] io scheduler cfq registered (default)
[ 0.842606] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.842619] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.842620] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.842875] GHES: HEST is not enabled!
[ 0.843008] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.863283] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.863749] Linux agpgart interface v0.103
[ 0.863827] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.863829] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.863949] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.864034] mousedev: PS/2 mouse device common for all mice
[ 0.864065] rtc_cmos 00:07: RTC can wake from S4
[ 0.864155] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.864175] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.864183] cpuidle: using governor ladder
[ 0.864184] cpuidle: using governor menu
[ 0.864208] drop_monitor: Initializing network drop monitor service
[ 0.864260] TCP: cubic registered
[ 0.864307] NET: Registered protocol family 10
[ 0.864455] mip6: Mobile IPv6
[ 0.864457] NET: Registered protocol family 17
[ 0.864466] Key type dns_resolver registered
[ 0.864735] PM: Hibernation image not present or could not be loaded.
[ 0.864742] registered taskstats version 1
[ 0.865097] rtc_cmos 00:07: setting system clock to 2013-03-26 18:50:06 UTC (1364323806)
[ 0.866001] Freeing unused kernel memory: 616k freed
[ 0.866113] Write protecting the kernel read-only data: 6144k
[ 0.867555] Freeing unused kernel memory: 496k freed
[ 0.869112] Freeing unused kernel memory: 572k freed
[ 0.879399] udevd[68]: starting version 175
[ 0.885062] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.899327] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.899542] r8169 0000:01:00.0: irq 41 for MSI/MSI-X
[ 0.899716] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c1a000, d4:3d:7e:53:cb:b8, XID 0c900800 IRQ 41
[ 0.899719] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.903563] ACPI: bus type usb registered
[ 0.903586] usbcore: registered new interface driver usbfs
[ 0.903594] usbcore: registered new interface driver hub
[ 0.904486] usbcore: registered new device driver usb
[ 0.904915] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.904923] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 0.904956] QUIRK: Enable AMD PLL fix
[ 0.905139] xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb4a000
[ 0.905194] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[ 0.905204] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 0.905212] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 0.905220] xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
[ 0.905228] xhci_hcd 0000:00:10.0: irq 46 for MSI/MSI-X
[ 0.905336] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.905340] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.905342] usb usb1: Product: xHCI Host Controller
[ 0.905345] usb usb1: Manufacturer: Linux 3.8.4iommu xhci_hcd
[ 0.905347] usb usb1: SerialNumber: 0000:00:10.0
[ 0.905439] xHCI xhci_add_endpoint called for root hub
[ 0.905442] xHCI xhci_check_bandwidth called for root hub
[ 0.905571] hub 1-0:1.0: USB hub found
[ 0.905579] hub 1-0:1.0: 2 ports detected
[ 0.905667] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.905672] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.906748] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.906987] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.907969] SCSI subsystem initialized
[ 0.908546] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.908549] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.908552] usb usb2: Product: xHCI Host Controller
[ 0.908554] usb usb2: Manufacturer: Linux 3.8.4iommu xhci_hcd
[ 0.908556] usb usb2: SerialNumber: 0000:00:10.0
[ 0.908648] xHCI xhci_add_endpoint called for root hub
[ 0.908650] xHCI xhci_check_bandwidth called for root hub
[ 0.908677] hub 2-0:1.0: USB hub found
[ 0.908684] hub 2-0:1.0: 2 ports detected
[ 0.909099] ACPI: bus type scsi registered
[ 0.910361] libata version 3.00 loaded.
[ 0.931473] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 0.931482] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 0.931686] xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb48000
[ 0.931743] xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
[ 0.931752] xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
[ 0.931760] xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
[ 0.931767] xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
[ 0.931774] xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
[ 0.931881] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.931885] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.931887] usb usb3: Product: xHCI Host Controller
[ 0.931890] usb usb3: Manufacturer: Linux 3.8.4iommu xhci_hcd
[ 0.931892] usb usb3: SerialNumber: 0000:00:10.1
[ 0.931979] xHCI xhci_add_endpoint called for root hub
[ 0.931980] xHCI xhci_check_bandwidth called for root hub
[ 0.932005] hub 3-0:1.0: USB hub found
[ 0.932011] hub 3-0:1.0: 2 ports detected
[ 0.932084] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 0.932088] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[ 0.935078] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.935080] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.935082] usb usb4: Product: xHCI Host Controller
[ 0.935084] usb usb4: Manufacturer: Linux 3.8.4iommu xhci_hcd
[ 0.935085] usb usb4: SerialNumber: 0000:00:10.1
[ 0.935236] xHCI xhci_add_endpoint called for root hub
[ 0.935238] xHCI xhci_check_bandwidth called for root hub
[ 0.935258] hub 4-0:1.0: USB hub found
[ 0.935265] hub 4-0:1.0: 2 ports detected
[ 0.967430] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.967440] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 0.967473] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb50000
[ 1.027209] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.027213] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.027216] usb usb5: Product: OHCI Host Controller
[ 1.027217] usb usb5: Manufacturer: Linux 3.8.4iommu ohci_hcd
[ 1.027219] usb usb5: SerialNumber: 0000:00:12.0
[ 1.027370] hub 5-0:1.0: USB hub found
[ 1.027377] hub 5-0:1.0: 5 ports detected
[ 1.027509] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.027514] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 1.027531] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4e000
[ 1.087061] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.087065] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.087067] usb usb6: Product: OHCI Host Controller
[ 1.087069] usb usb6: Manufacturer: Linux 3.8.4iommu ohci_hcd
[ 1.087070] usb usb6: SerialNumber: 0000:00:13.0
[ 1.087357] hub 6-0:1.0: USB hub found
[ 1.087366] hub 6-0:1.0: 5 ports detected
[ 1.087508] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.087513] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.087530] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4c000
[ 1.146883] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.146887] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.146890] usb usb7: Product: OHCI Host Controller
[ 1.146891] usb usb7: Manufacturer: Linux 3.8.4iommu ohci_hcd
[ 1.146893] usb usb7: SerialNumber: 0000:00:14.5
[ 1.147030] hub 7-0:1.0: USB hub found
[ 1.147037] hub 7-0:1.0: 2 ports detected
[ 1.147120] ahci 0000:00:11.0: version 3.0
[ 1.147202] ahci 0000:00:11.0: irq 52 for MSI/MSI-X
[ 1.147307] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.147311] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.148378] scsi0 : ahci
[ 1.148465] scsi1 : ahci
[ 1.148542] scsi2 : ahci
[ 1.148600] scsi3 : ahci
[ 1.148656] scsi4 : ahci
[ 1.148717] scsi5 : ahci
[ 1.148771] ata1: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 52
[ 1.148775] ata2: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51180 irq 52
[ 1.148778] ata3: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51200 irq 52
[ 1.148782] ata4: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51280 irq 52
[ 1.148785] ata5: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51300 irq 52
[ 1.148787] ata6: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51380 irq 52
[ 1.422110] usb 6-2: new low-speed USB device number 2 using ohci_hcd
[ 1.466022] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.466054] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.466087] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.466121] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.466152] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.588768] usb 6-2: New USB device found, idVendor=046d, idProduct=c05b
[ 1.588772] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.588774] usb 6-2: Product: USB Optical Mouse
[ 1.588776] usb 6-2: Manufacturer: Logitech
[ 1.596816] usbcore: registered new interface driver usbhid
[ 1.596819] usbhid: USB HID core driver
[ 1.598534] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.0/input/input1
[ 1.598628] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-2/input0
[ 1.637520] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.638531] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM04B0Q, max UDMA/133
[ 1.638535] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.639073] ata1.00: configured for UDMA/133
[ 1.639206] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
[ 1.643191] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.643264] sd 0:0:0:0: [sda] Write Protect is off
[ 1.643267] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.643293] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.643793] sda: sda1 sda2 < sda5 >
[ 1.644137] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.645616] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.678329] PM: Starting manual resume from disk
[ 1.678332] PM: Hibernation image partition 8:5 present
[ 1.678334] PM: Looking for hibernation image.
[ 1.678495] PM: Image not found (code -22)
[ 1.678496] PM: Hibernation image not present or could not be loaded.
[ 1.693285] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.725208] usb 6-3: new full-speed USB device number 3 using ohci_hcd
[ 1.825022] tsc: Refined TSC clocksource calibration: 3392.620 MHz
[ 1.825027] Switching to clocksource tsc
[ 1.838131] udevd[372]: starting version 175
[ 1.884483] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.884490] ACPI: Power Button [PWRB]
[ 1.884548] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.884552] ACPI: Power Button [PWRF]
[ 1.884814] ACPI: acpi_idle registered with cpuidle
[ 1.891851] usb 6-3: New USB device found, idVendor=1397, idProduct=00bc
[ 1.891857] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.891860] usb 6-3: Product: BCF2000
[ 1.891862] usb 6-3: Manufacturer: BEHRINGER
[ 1.907487] parport_pc 00:05: reported by Plug and Play ACPI
[ 1.907531] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 1.925264] wmi: Mapper loaded
[ 1.925784] ehci-pci: EHCI PCI platform driver
[ 1.925817] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.925824] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 8
[ 1.925829] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.925839] ehci-pci 0000:00:12.2: debug port 1
[ 1.925873] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4f000
[ 1.929754] cfg80211: Calling CRDA to update world regulatory domain
[ 1.936614] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.936642] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.936645] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.936648] usb usb8: Product: EHCI Host Controller
[ 1.936650] usb usb8: Manufacturer: Linux 3.8.4iommu ehci_hcd
[ 1.936652] usb usb8: SerialNumber: 0000:00:12.2
[ 1.941179] hub 8-0:1.0: USB hub found
[ 1.941188] hub 8-0:1.0: 5 ports detected
[ 1.941350] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.941356] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 9
[ 1.941362] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.941381] ehci-pci 0000:00:13.2: debug port 1
[ 1.941423] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4d000
[ 1.945234] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 1.946510] microcode: CPU0: patch_level=0x06001119
[ 1.952668] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.952703] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.952707] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.952710] usb usb9: Product: EHCI Host Controller
[ 1.952713] usb usb9: Manufacturer: Linux 3.8.4iommu ehci_hcd
[ 1.952716] usb usb9: SerialNumber: 0000:00:13.2
[ 1.972691] hub 9-0:1.0: USB hub found
[ 1.972698] hub 9-0:1.0: 5 ports detected
[ 1.973101] hda-intel 0000:00:01.1: Force to non-snoop mode
[ 1.973168] snd_hda_intel 0000:00:01.1: irq 53 for MSI/MSI-X
[ 1.974033] yenta_cardbus 0000:03:05.0: CardBus bridge found [0000:0000]
[ 1.981423] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
[ 2.012363] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 2.014969] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 2.015045] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 2.015107] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 2.015172] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 2.015774] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
[ 2.015818] microcode: CPU1: patch_level=0x06001119
[ 2.015832] microcode: CPU2: patch_level=0x06001119
[ 2.015838] microcode: CPU3: patch_level=0x06001119
[ 2.015873] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.016506] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 2.016769] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 2.016977] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 2.018243] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.032757] cfg80211: World regulatory domain updated:
[ 2.032760] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.032763] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.032766] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.032769] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.032771] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.032773] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.033165] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 2.053138] kvm: Nested Virtualization enabled
[ 2.053144] kvm: Nested Paging enabled
[ 2.056079] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.062652] usbcore: registered new interface driver snd-usb-audio
[ 2.064426] ath: EEPROM regdomain: 0x809c
[ 2.064429] ath: EEPROM indicates we should expect a country code
[ 2.064432] ath: doing EEPROM country->regdmn map search
[ 2.064433] ath: country maps to regdmn code: 0x52
[ 2.064436] ath: Country alpha2 being used: CN
[ 2.064437] ath: Regpair used: 0x52
[ 2.068622] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 2.068805] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90010f00000, irq=17
[ 2.068952] cfg80211: Calling CRDA for country: CN
[ 2.075085] cfg80211: Regulatory domain changed to country: CN
[ 2.075089] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.075091] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2.075093] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 2.076243] usb 6-2: USB disconnect, device number 2
[ 2.100915] yenta_cardbus 0000:03:05.0: ISA IRQ mask 0x0000, PCI irq 20
[ 2.100922] yenta_cardbus 0000:03:05.0: Socket status: 30000820
[ 2.100927] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 2.100941] yenta_cardbus 0000:03:05.0: pcmcia: parent PCI bridge window: [io 0xc000-0xdfff]
[ 2.100946] yenta_cardbus 0000:03:05.0: pcmcia: parent PCI bridge window: [mem 0xfd400000-0xfe8fffff]
[ 2.100950] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfd400000-0xfe8fffff:
[ 2.100965] excluding 0xfe7b0000-0xfe8fffff
[ 2.100971] yenta_cardbus 0000:03:05.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd13fffff pref]
[ 2.100975] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd13fffff:
[ 2.100992] excluding 0xd0000000-0xd13fffff
[ 2.108776] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 2.108792] excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 2.108850] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 2.108874] excluding 0xa0000000-0xa0ffffff
[ 2.108914] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 2.108942] excluding 0x60000000-0x60ffffff
[ 2.239884] usb 6-3: USB disconnect, device number 3
[ 2.462310] Adding 10157052k swap on /dev/sda5. Priority:-1 extents:1 across:10157052k SS
[ 2.489149] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 2.544009] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.586469] [drm] Initialized drm 1.1.0 20060810
[ 2.602845] [drm] radeon kernel modesetting enabled.
[ 2.603278] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9901 0x1462:0x7721).
[ 2.603360] [drm] register mmio base: 0xFEB00000
[ 2.603364] [drm] register mmio size: 262144
[ 2.603660] ATOM BIOS: 113
[ 2.603702] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 2.603710] radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 2.604823] [drm] Detected VRAM RAM=512M, BAR=256M
[ 2.604829] [drm] RAM width 64bits DDR
[ 2.605329] [TTM] Zone kernel: Available graphics memory: 3783278 kiB
[ 2.605336] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.605340] [TTM] Initializing pool allocator
[ 2.605351] [TTM] Initializing DMA pool allocator
[ 2.605404] [drm] radeon: 512M of VRAM memory ready
[ 2.605408] [drm] radeon: 512M of GTT memory ready.
[ 2.605450] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.605456] [drm] Driver supports precise vblank timestamp query.
[ 2.605528] radeon 0000:00:01.0: irq 54 for MSI/MSI-X
[ 2.605550] radeon 0000:00:01.0: radeon: using MSI.
[ 2.605849] [drm] radeon: irq initialized.
[ 2.605864] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.607433] [drm] Loading ARUBA Microcode
[ 2.641317] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 2.641436] radeon 0000:00:01.0: WB enabled
[ 2.641439] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880234f21c00
[ 2.641442] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff880234f21c04
[ 2.641444] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff880234f21c08
[ 2.641446] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880234f21c0c
[ 2.641448] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff880234f21c10
[ 2.660499] [drm] ring test on 0 succeeded in 2 usecs
[ 2.660560] [drm] ring test on 3 succeeded in 2 usecs
[ 2.660568] [drm] ring test on 4 succeeded in 1 usecs
[ 2.679903] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.680447] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.680980] [drm] ib test on ring 4 succeeded in 1 usecs
[ 2.683354] [drm] Radeon Display Connectors
[ 2.683361] [drm] Connector 0:
[ 2.683366] [drm] HDMI-A-1
[ 2.683700] [drm] HPD1
[ 2.683707] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 2.683710] [drm] Encoders:
[ 2.683714] [drm] DFP1: INTERNAL_UNIPHY2
[ 2.683717] [drm] Connector 1:
[ 2.683721] [drm] VGA-1
[ 2.683724] [drm] HPD2
[ 2.683729] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 2.683732] [drm] Encoders:
[ 2.683735] [drm] CRT1: INTERNAL_UNIPHY2
[ 2.683738] [drm] CRT1: NUTMEG
[ 2.683741] [drm] Connector 2:
[ 2.683744] [drm] DVI-D-1
[ 2.683748] [drm] HPD3
[ 2.683752] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 2.683755] [drm] Encoders:
[ 2.683758] [drm] DFP2: INTERNAL_UNIPHY
[ 2.735745] [drm] Internal thermal controller without fan control
[ 2.735776] [drm] radeon: power management initialized
[ 2.806265] usb 6-2: new low-speed USB device number 4 using ohci_hcd
[ 2.900963] [drm] fb mappable at 0xC114C000
[ 2.900967] [drm] vram apper at 0xC0000000
[ 2.900968] [drm] size 3145728
[ 2.900969] [drm] fb depth is 24
[ 2.900971] [drm] pitch is 4096
[ 2.901041] fbcon: radeondrmfb (fb0) is primary device
[ 2.972874] usb 6-2: New USB device found, idVendor=046d, idProduct=c05b
[ 2.972879] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.972882] usb 6-2: Product: USB Optical Mouse
[ 2.972885] usb 6-2: Manufacturer: Logitech
[ 2.980310] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.0/input/input14
[ 2.980562] hid-generic 0003:046D:C05B.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-2/input0
[ 2.989781] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 2.989809] pci 0000:04:00.0: [10ee:3fc5] type 00 class 0x040100
[ 2.989839] pci 0000:04:00.0: reg 10: [mem 0x00000000-0x0000ffff]
[ 2.989963] pci 0000:04:00.0: BAR 0: assigned [mem 0xd8000000-0xd800ffff]
[ 2.989984] pci 0000:04:00.0: cache line size of 64 is not supported
[ 2.990043] AMD-Vi: Adding device 0000:04:00.0
[ 2.990069] AMD-Vi: Already dma_domain for 0000:04:00.0
[ 2.995969] snd_hdsp 0000:04:00.0: enabling device (0000 -> 0002)
[ 3.027326] Console: switching to colour frame buffer device 128x48
[ 3.032072] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 3.032078] radeon 0000:00:01.0: registered panic notifier
[ 3.032088] [drm] Initialized radeon 2.29.0 20080528 for 0000:00:01.0 on minor 0
[ 3.049477] loop: module loaded
[ 3.241030] usb 6-3: new full-speed USB device number 5 using ohci_hcd
[ 3.407685] usb 6-3: New USB device found, idVendor=1397, idProduct=00bc
[ 3.407697] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.407704] usb 6-3: Product: BCF2000
[ 3.407711] usb 6-3: Manufacturer: BEHRINGER
[ 3.485792] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4.306881] wlan0: authenticate with 00:12:bf:b5:6c:86
[ 4.314358] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[ 4.322507] wlan0: send auth to 00:12:bf:b5:6c:86 (try 1/3)
[ 4.325114] wlan0: authenticated
[ 4.326094] wlan0: associate with 00:12:bf:b5:6c:86 (try 1/3)
[ 4.340461] wlan0: RX AssocResp from 00:12:bf:b5:6c:86 (capab=0x431 status=0 aid=2)
[ 4.340547] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4.340642] wlan0: associated
[ 5.534807] Hammerfall-DSP: Firmware already present, initializing card.
[ 8.378332] RPC: Registered named UNIX socket transport module.
[ 8.378339] RPC: Registered udp transport module.
[ 8.378345] RPC: Registered tcp transport module.
[ 8.378349] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.384074] FS-Cache: Loaded
[ 8.393826] FS-Cache: Netfs 'nfs' registered for caching
[ 8.404151] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 9.079407] Bluetooth: Core ver 2.16
[ 9.079462] NET: Registered protocol family 31
[ 9.079464] Bluetooth: HCI device and connection manager initialized
[ 9.079472] Bluetooth: HCI socket layer initialized
[ 9.079476] Bluetooth: L2CAP socket layer initialized
[ 9.079482] Bluetooth: SCO socket layer initialized
[ 9.087390] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.087393] Bluetooth: BNEP filters: protocol multicast
[ 9.087402] Bluetooth: BNEP socket layer initialized
[ 9.091876] Bluetooth: RFCOMM TTY layer initialized
[ 9.091887] Bluetooth: RFCOMM socket layer initialized
[ 9.091890] Bluetooth: RFCOMM ver 1.11
[ 9.234562] r8169 0000:01:00.0 eth0: link down
[ 9.234664] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 94.322779] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c00000 flags=0x0000]
[ 94.323685] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c00080 flags=0x0000]
[ 94.324492] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c00040 flags=0x0000]
[ 94.325297] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c000c0 flags=0x0000]
[ 94.326124] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c00000 flags=0x0000]
[ 94.326962] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c00080 flags=0x0000]
[ 94.327734] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c00040 flags=0x0000]
[ 94.328494] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c000c0 flags=0x0000]
[ 94.329244] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c00100 flags=0x0000]
[ 94.330028] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c10000 flags=0x0000]
[ 94.330936] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c10080 flags=0x0000]
[ 94.331856] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c10040 flags=0x0000]
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: soundcard (dma) stopped working with commit 27c2127 (x86/amd-iommu: Use only per-device dma_ops)
[not found] ` <CAHccUrKpMiY4DURL_V2fPD8anz3T8WQT2_0PABu87mCzokpaWA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2013-03-26 20:30 ` Joerg Roedel
[not found] ` <20130326203054.GA30540-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 10+ messages in thread
From: Joerg Roedel @ 2013-03-26 20:30 UTC (permalink / raw)
To: Andreas Degert; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
[-- Attachment #1: Type: text/plain, Size: 472 bytes --]
On Tue, Mar 26, 2013 at 08:40:18PM +0100, Andreas Degert wrote:
> dmesg output appended. I was wrong, there are io page faults
> when I trigger dma transfer with the soundcard, like you expected.
> At the end of the dmesg output are the IO_PAGE_FAULT's from
> trying to do a playback.
Okay, thanks for trying this out. I think I know where the problem is,
can you try the attached patch (without my debug-patch) and report me
whether it fixes the issue?
Thanks,
Joerg
[-- Attachment #2: iommu-fix.patch --]
[-- Type: text/x-diff, Size: 1045 bytes --]
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index c1c74e0..4647b50 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -2466,18 +2466,16 @@ static int device_change_notifier(struct notifier_block *nb,
/* allocate a protection domain if a device is added */
dma_domain = find_protection_domain(devid);
- if (dma_domain)
- goto out;
- dma_domain = dma_ops_domain_alloc();
- if (!dma_domain)
- goto out;
- dma_domain->target_dev = devid;
-
- spin_lock_irqsave(&iommu_pd_list_lock, flags);
- list_add_tail(&dma_domain->list, &iommu_pd_list);
- spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
-
- dev_data = get_dev_data(dev);
+ if (!dma_domain) {
+ dma_domain = dma_ops_domain_alloc();
+ if (!dma_domain)
+ goto out;
+ dma_domain->target_dev = devid;
+
+ spin_lock_irqsave(&iommu_pd_list_lock, flags);
+ list_add_tail(&dma_domain->list, &iommu_pd_list);
+ spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
+ }
dev->archdata.dma_ops = &amd_iommu_dma_ops;
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: soundcard (dma) stopped working with commit 27c2127 (x86/amd-iommu: Use only per-device dma_ops)
[not found] ` <20130326203054.GA30540-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2013-03-27 7:14 ` Andreas Degert
[not found] ` <CAHccUr+MkODo0_Tci9sDEyXNBHu7CyqnVCamauvDESC_QL22HQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 10+ messages in thread
From: Andreas Degert @ 2013-03-27 7:14 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
2013/3/26 Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>:
> Okay, thanks for trying this out. I think I know where the problem is,
> can you try the attached patch (without my debug-patch) and report me
> whether it fixes the issue?
Yes, works. What is the value of archdata.dma_ops before the assignment
and where is it set? (my hack to set the global variable dma_ops seems to
change that value.)
thanks
Andreas
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: soundcard (dma) stopped working with commit 27c2127 (x86/amd-iommu: Use only per-device dma_ops)
[not found] ` <CAHccUr+MkODo0_Tci9sDEyXNBHu7CyqnVCamauvDESC_QL22HQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2013-03-27 8:28 ` Joerg Roedel
0 siblings, 0 replies; 10+ messages in thread
From: Joerg Roedel @ 2013-03-27 8:28 UTC (permalink / raw)
To: Andreas Degert; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Wed, Mar 27, 2013 at 08:14:58AM +0100, Andreas Degert wrote:
> 2013/3/26 Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>:
> > Okay, thanks for trying this out. I think I know where the problem is,
> > can you try the attached patch (without my debug-patch) and report me
> > whether it fixes the issue?
>
> Yes, works. What is the value of archdata.dma_ops before the assignment
> and where is it set? (my hack to set the global variable dma_ops seems to
> change that value.)
It is a little bit different. When the per-device dma_ops is not set the
global one will be used. Your fix set the global one which hides the
bug, that the per-device one was not set in this case.
Joerg
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2013-03-27 8:28 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-03-26 7:37 soundcard (dma) stopped working with commit 27c2127 (x86/amd-iommu: Use only per-device dma_ops) Andreas Degert
[not found] ` <CAHccUrL2_JLMyYzzBYUdUGy0VVRRk90u9_MyknPKcRJpr_ZDfQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-03-26 9:49 ` Joerg Roedel
[not found] ` <20130326094930.GD13035-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2013-03-26 12:48 ` Andreas Degert
[not found] ` <CAHccUr+w1_65uBXLcmZLrPOgbC8Ldk8+PKxaRLv03rBYxBRDkg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-03-26 14:23 ` Joerg Roedel
[not found] ` <20130326142336.GE13035-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2013-03-26 15:20 ` Andreas Degert
[not found] ` <CAHccUrKmtjqBZVb1+1O5c4j6_9Er5Ow4tPRhExCW-g_kaV1-3A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-03-26 16:11 ` Joerg Roedel
[not found] ` <20130326161132.GF2727-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2013-03-26 19:40 ` Andreas Degert
[not found] ` <CAHccUrKpMiY4DURL_V2fPD8anz3T8WQT2_0PABu87mCzokpaWA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-03-26 20:30 ` Joerg Roedel
[not found] ` <20130326203054.GA30540-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2013-03-27 7:14 ` Andreas Degert
[not found] ` <CAHccUr+MkODo0_Tci9sDEyXNBHu7CyqnVCamauvDESC_QL22HQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-03-27 8:28 ` Joerg Roedel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.