* [PATCH 0/2] ARM: shmobile: sh73a0 Suspend-to-RAM
@ 2013-03-21 13:31 ` Bastian Hecht
0 siblings, 0 replies; 11+ messages in thread
From: Bastian Hecht @ 2013-03-21 13:31 UTC (permalink / raw)
To: linux-arm-kernel
Here is a patch for shutting down the CPU0 to Power Off mode during
SUSPEND-to-RAM (in which case CPU1 is already shut down to Power Off mode
due to CPU hotplug).
While patch 2/2 implements this, we face some unresolved problems with the
interrupt controller code. See: "[PATCH] input: st1232: Add IRQF_NO_SUSPEND flag"
posted on 14th of February. This problem makes us unable to use the touchscreen
as a wakeup source. I consider patch 2/2 sane in itself though, and we
should consider merging it.
To test Suspend-to-RAM, patch 1/2 is supplied that is a workaround to the problem.
When I use the gpio keys in general (and as wakeup source), I get
------------[ cut here ]------------
WARNING: at drivers/tty/tty_buffer.c:428 flush_to_ldisc+0x44/0x1a0()
tty is NULL
I suppose this is another independent problem to this code.
Side note for future work: On the way to CPUIdle we might want to use
CPUIDLE_FLAG_COUPLED that enables us to coordinate the shutdown of both CPUs.
The patches are based on Simon's renesas/next branch.
Bastian Hecht (2):
input: st1232: Add IRQF_NO_SUSPEND flag
ARM: shmobile: sh73a0: Suspend-to-RAM Power Off mode
arch/arm/mach-shmobile/Makefile | 2 +-
arch/arm/mach-shmobile/headsmp-sh73a0.S | 72 ++++++++++++++++++++++++++
arch/arm/mach-shmobile/include/mach/common.h | 1 +
arch/arm/mach-shmobile/pm-sh73a0.c | 32 ++++++++++--
arch/arm/mach-shmobile/smp-sh73a0.c | 2 +-
drivers/input/touchscreen/st1232.c | 2 +-
6 files changed, 104 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/mach-shmobile/headsmp-sh73a0.S
--
1.7.9.5
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 0/2] ARM: shmobile: sh73a0 Suspend-to-RAM
@ 2013-03-21 13:31 ` Bastian Hecht
0 siblings, 0 replies; 11+ messages in thread
From: Bastian Hecht @ 2013-03-21 13:31 UTC (permalink / raw)
To: linux-arm-kernel
Here is a patch for shutting down the CPU0 to Power Off mode during
SUSPEND-to-RAM (in which case CPU1 is already shut down to Power Off mode
due to CPU hotplug).
While patch 2/2 implements this, we face some unresolved problems with the
interrupt controller code. See: "[PATCH] input: st1232: Add IRQF_NO_SUSPEND flag"
posted on 14th of February. This problem makes us unable to use the touchscreen
as a wakeup source. I consider patch 2/2 sane in itself though, and we
should consider merging it.
To test Suspend-to-RAM, patch 1/2 is supplied that is a workaround to the problem.
When I use the gpio keys in general (and as wakeup source), I get
------------[ cut here ]------------
WARNING: at drivers/tty/tty_buffer.c:428 flush_to_ldisc+0x44/0x1a0()
tty is NULL
I suppose this is another independent problem to this code.
Side note for future work: On the way to CPUIdle we might want to use
CPUIDLE_FLAG_COUPLED that enables us to coordinate the shutdown of both CPUs.
The patches are based on Simon's renesas/next branch.
Bastian Hecht (2):
input: st1232: Add IRQF_NO_SUSPEND flag
ARM: shmobile: sh73a0: Suspend-to-RAM Power Off mode
arch/arm/mach-shmobile/Makefile | 2 +-
arch/arm/mach-shmobile/headsmp-sh73a0.S | 72 ++++++++++++++++++++++++++
arch/arm/mach-shmobile/include/mach/common.h | 1 +
arch/arm/mach-shmobile/pm-sh73a0.c | 32 ++++++++++--
arch/arm/mach-shmobile/smp-sh73a0.c | 2 +-
drivers/input/touchscreen/st1232.c | 2 +-
6 files changed, 104 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/mach-shmobile/headsmp-sh73a0.S
--
1.7.9.5
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 2/2] ARM: shmobile: sh73a0: Suspend-to-RAM Power Off mode
2013-03-21 13:31 ` Bastian Hecht
@ 2013-03-21 13:31 ` Bastian Hecht
-1 siblings, 0 replies; 11+ messages in thread
From: Bastian Hecht @ 2013-03-21 13:31 UTC (permalink / raw)
To: linux-arm-kernel
We add Power Off mode defined by the ARM architecture as our
Suspend-to-RAM mechanism. Here the L2 cache keeps its power and we only
take care to flush the L1. Different startup paths are added for the two
CPUs, one leading to cpu_resume() and the other to secondary_startup().
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
---
arch/arm/mach-shmobile/Makefile | 2 +-
arch/arm/mach-shmobile/headsmp-sh73a0.S | 72 ++++++++++++++++++++++++++
arch/arm/mach-shmobile/include/mach/common.h | 1 +
arch/arm/mach-shmobile/pm-sh73a0.c | 32 ++++++++++--
arch/arm/mach-shmobile/smp-sh73a0.c | 9 +++-
5 files changed, 109 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/mach-shmobile/headsmp-sh73a0.S
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index c621edf..1d33d89 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -14,7 +14,7 @@ obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o
# SMP objects
smp-y := platsmp.o headsmp.o
-smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o
+smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-sh73a0.o headsmp-scu.o
smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o
smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o
diff --git a/arch/arm/mach-shmobile/headsmp-sh73a0.S b/arch/arm/mach-shmobile/headsmp-sh73a0.S
new file mode 100644
index 0000000..6ffed46
--- /dev/null
+++ b/arch/arm/mach-shmobile/headsmp-sh73a0.S
@@ -0,0 +1,72 @@
+/*
+ * SMP support for SoC sh73a0
+ *
+ * Copyright (C) 2013 Bastian Hecht
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/memory.h>
+
+ __CPUINIT
+
+ENTRY(sh73a0_primary_resume)
+ bl v7_invalidate_l1
+ b cpu_resume
+ENDPROC(sh73a0_primary_resume)
+
+ENTRY(sh73a0_secondary_startup)
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(sh73a0_primary_resume)
+
+/*
+ * Reset vector for both CPUs.
+ *
+ * This function will be mapped to address 0 by the SBAR register and is the
+ * general wakeup vector.
+ * For both CPUs we need to set the SCU power flag to Run Mode and invalidate
+ * the L1 cache so no random data get flushed out later.
+ * We can't use v7_invalidate_l1() directly as a normal branch is out of range
+ * here and so we need a long jump. We jump to the physical address as the
+ * MMU is still turned off.
+ *
+ * We do not need to worry about CPU1 running ahead of CPU0 as the secondary
+ * CPU of the sh73a0 needs to be woken using the WUPCR register. This is done
+ * in sh73a0_boot_secondary().
+ */
+ .align 12
+ENTRY(sh73a0_reset_vector)
+ /* Retrieve the CPU ID and keep it in r4 */
+ mrc p15, 0, r4, c0, c0, 5 @ read MIPDR
+ and r4, r4, #3 @ mask out cpu ID
+
+ /*
+ * We clear the SCU Power status flag to prepare for the
+ * L1 coherency mode
+ */
+ mov r0, r4 @ copy CPU ID
+ lsl r0, r0, #3 @ we will shift by cpu_id * 8 bits
+ ldr r1, 3f
+ ldr r1, [r1] @ SCU base address
+ ldr r2, [r1, #8] @ SCU Power Status Register
+ mov r3, #3
+ bic r2, r2, r3, lsl r0 @ Clear bits of our CPU (Run Mode)
+ str r2, [r1, #8] @ write back
+
+ /*
+ * Depending on the CPU ID we either resume our primary core from
+ * sleeping or bring up the secondary CPU
+ */
+ cmp r4, #0 @ if CPU0
+ ldreq pc, 1f @ jump to sh73a0_primary_resume
+ ldr pc, 2f @ jump to sh73a0_secondary_startup
+
+1: .long sh73a0_primary_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET
+2: .long sh73a0_secondary_startup - PAGE_OFFSET + PLAT_PHYS_OFFSET
+3: .long shmobile_scu_base - PAGE_OFFSET + PLAT_PHYS_OFFSET
+ENDPROC(sh73a0_reset_vector)
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 03f73de..842bb35 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -45,6 +45,7 @@ extern void sh73a0_add_standard_devices_dt(void);
extern void sh73a0_clock_init(void);
extern void sh73a0_pinmux_init(void);
extern void sh73a0_pm_init(void);
+extern void sh73a0_reset_vector(void);
extern struct clk sh73a0_extal1_clk;
extern struct clk sh73a0_extal2_clk;
extern struct clk sh73a0_extcki_clk;
diff --git a/arch/arm/mach-shmobile/pm-sh73a0.c b/arch/arm/mach-shmobile/pm-sh73a0.c
index 99086e9..7e8e0a1 100644
--- a/arch/arm/mach-shmobile/pm-sh73a0.c
+++ b/arch/arm/mach-shmobile/pm-sh73a0.c
@@ -1,30 +1,54 @@
/*
* sh73a0 Power management support
*
- * Copyright (C) 2012 Bastian Hecht <hechtb+renesas@gmail.com>
+ * Copyright (C) 2013 Bastian Hecht <hechtb+renesas@gmail.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+#include <linux/cpuidle.h>
+#include <linux/module.h>
#include <linux/suspend.h>
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
#include <mach/common.h>
#ifdef CONFIG_SUSPEND
-static int sh73a0_enter_suspend(suspend_state_t suspend_state)
+/*
+ * sh73a0_do_poweroff: Power off the main CPU
+ *
+ * The L2 cache doesn't loose power in Power Off mode - ignore it.
+ * After flushing the L1 cache we don't take care to disable it as we
+ * only work on temporary values in a UP environment and it gets invalidated
+ * on startup. Just straight take down the ARM core.
+ */
+static int sh73a0_do_poweroff(unsigned long unused)
{
+ flush_cache_all();
+ scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF);
cpu_do_idle();
+
+ return 0;
+}
+
+static int sh73a0_enter_poweroff_suspend(suspend_state_t suspend_state)
+{
+ cpu_suspend(0, sh73a0_do_poweroff);
+
return 0;
}
static void sh73a0_suspend_init(void)
{
- shmobile_suspend_ops.enter = sh73a0_enter_suspend;
+ shmobile_suspend_ops.enter = sh73a0_enter_poweroff_suspend;
}
#else
static void sh73a0_suspend_init(void) {}
-#endif
+#endif /* CONFIG_SUSPEND */
void __init sh73a0_pm_init(void)
{
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 5ae502b..348714e 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -70,9 +70,14 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
{
scu_enable(shmobile_scu_base);
- /* Map the reset vector (in headsmp-scu.S) */
+ /*
+ * Map the general reset vector that is hit from multiple paths:
+ * - Primary CPU resume at wakeup time
+ * - Secondary startup at boot time
+ * - Secondary startup at wakeup time
+ */
__raw_writel(0, APARMBAREA); /* 4k */
- __raw_writel(__pa(shmobile_secondary_vector_scu), SBAR);
+ __raw_writel(__pa(sh73a0_reset_vector), SBAR);
/* enable cache coherency on booting CPU */
scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 2/2] ARM: shmobile: sh73a0: Suspend-to-RAM Power Off mode
@ 2013-03-21 13:31 ` Bastian Hecht
0 siblings, 0 replies; 11+ messages in thread
From: Bastian Hecht @ 2013-03-21 13:31 UTC (permalink / raw)
To: linux-arm-kernel
We add Power Off mode defined by the ARM architecture as our
Suspend-to-RAM mechanism. Here the L2 cache keeps its power and we only
take care to flush the L1. Different startup paths are added for the two
CPUs, one leading to cpu_resume() and the other to secondary_startup().
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
---
arch/arm/mach-shmobile/Makefile | 2 +-
arch/arm/mach-shmobile/headsmp-sh73a0.S | 72 ++++++++++++++++++++++++++
arch/arm/mach-shmobile/include/mach/common.h | 1 +
arch/arm/mach-shmobile/pm-sh73a0.c | 32 ++++++++++--
arch/arm/mach-shmobile/smp-sh73a0.c | 9 +++-
5 files changed, 109 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/mach-shmobile/headsmp-sh73a0.S
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index c621edf..1d33d89 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -14,7 +14,7 @@ obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o
# SMP objects
smp-y := platsmp.o headsmp.o
-smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o
+smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-sh73a0.o headsmp-scu.o
smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o
smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o
diff --git a/arch/arm/mach-shmobile/headsmp-sh73a0.S b/arch/arm/mach-shmobile/headsmp-sh73a0.S
new file mode 100644
index 0000000..6ffed46
--- /dev/null
+++ b/arch/arm/mach-shmobile/headsmp-sh73a0.S
@@ -0,0 +1,72 @@
+/*
+ * SMP support for SoC sh73a0
+ *
+ * Copyright (C) 2013 Bastian Hecht
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/memory.h>
+
+ __CPUINIT
+
+ENTRY(sh73a0_primary_resume)
+ bl v7_invalidate_l1
+ b cpu_resume
+ENDPROC(sh73a0_primary_resume)
+
+ENTRY(sh73a0_secondary_startup)
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(sh73a0_primary_resume)
+
+/*
+ * Reset vector for both CPUs.
+ *
+ * This function will be mapped to address 0 by the SBAR register and is the
+ * general wakeup vector.
+ * For both CPUs we need to set the SCU power flag to Run Mode and invalidate
+ * the L1 cache so no random data get flushed out later.
+ * We can't use v7_invalidate_l1() directly as a normal branch is out of range
+ * here and so we need a long jump. We jump to the physical address as the
+ * MMU is still turned off.
+ *
+ * We do not need to worry about CPU1 running ahead of CPU0 as the secondary
+ * CPU of the sh73a0 needs to be woken using the WUPCR register. This is done
+ * in sh73a0_boot_secondary().
+ */
+ .align 12
+ENTRY(sh73a0_reset_vector)
+ /* Retrieve the CPU ID and keep it in r4 */
+ mrc p15, 0, r4, c0, c0, 5 @ read MIPDR
+ and r4, r4, #3 @ mask out cpu ID
+
+ /*
+ * We clear the SCU Power status flag to prepare for the
+ * L1 coherency mode
+ */
+ mov r0, r4 @ copy CPU ID
+ lsl r0, r0, #3 @ we will shift by cpu_id * 8 bits
+ ldr r1, 3f
+ ldr r1, [r1] @ SCU base address
+ ldr r2, [r1, #8] @ SCU Power Status Register
+ mov r3, #3
+ bic r2, r2, r3, lsl r0 @ Clear bits of our CPU (Run Mode)
+ str r2, [r1, #8] @ write back
+
+ /*
+ * Depending on the CPU ID we either resume our primary core from
+ * sleeping or bring up the secondary CPU
+ */
+ cmp r4, #0 @ if CPU0
+ ldreq pc, 1f @ jump to sh73a0_primary_resume
+ ldr pc, 2f @ jump to sh73a0_secondary_startup
+
+1: .long sh73a0_primary_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET
+2: .long sh73a0_secondary_startup - PAGE_OFFSET + PLAT_PHYS_OFFSET
+3: .long shmobile_scu_base - PAGE_OFFSET + PLAT_PHYS_OFFSET
+ENDPROC(sh73a0_reset_vector)
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 03f73de..842bb35 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -45,6 +45,7 @@ extern void sh73a0_add_standard_devices_dt(void);
extern void sh73a0_clock_init(void);
extern void sh73a0_pinmux_init(void);
extern void sh73a0_pm_init(void);
+extern void sh73a0_reset_vector(void);
extern struct clk sh73a0_extal1_clk;
extern struct clk sh73a0_extal2_clk;
extern struct clk sh73a0_extcki_clk;
diff --git a/arch/arm/mach-shmobile/pm-sh73a0.c b/arch/arm/mach-shmobile/pm-sh73a0.c
index 99086e9..7e8e0a1 100644
--- a/arch/arm/mach-shmobile/pm-sh73a0.c
+++ b/arch/arm/mach-shmobile/pm-sh73a0.c
@@ -1,30 +1,54 @@
/*
* sh73a0 Power management support
*
- * Copyright (C) 2012 Bastian Hecht <hechtb+renesas@gmail.com>
+ * Copyright (C) 2013 Bastian Hecht <hechtb+renesas@gmail.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+#include <linux/cpuidle.h>
+#include <linux/module.h>
#include <linux/suspend.h>
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
#include <mach/common.h>
#ifdef CONFIG_SUSPEND
-static int sh73a0_enter_suspend(suspend_state_t suspend_state)
+/*
+ * sh73a0_do_poweroff: Power off the main CPU
+ *
+ * The L2 cache doesn't loose power in Power Off mode - ignore it.
+ * After flushing the L1 cache we don't take care to disable it as we
+ * only work on temporary values in a UP environment and it gets invalidated
+ * on startup. Just straight take down the ARM core.
+ */
+static int sh73a0_do_poweroff(unsigned long unused)
{
+ flush_cache_all();
+ scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF);
cpu_do_idle();
+
+ return 0;
+}
+
+static int sh73a0_enter_poweroff_suspend(suspend_state_t suspend_state)
+{
+ cpu_suspend(0, sh73a0_do_poweroff);
+
return 0;
}
static void sh73a0_suspend_init(void)
{
- shmobile_suspend_ops.enter = sh73a0_enter_suspend;
+ shmobile_suspend_ops.enter = sh73a0_enter_poweroff_suspend;
}
#else
static void sh73a0_suspend_init(void) {}
-#endif
+#endif /* CONFIG_SUSPEND */
void __init sh73a0_pm_init(void)
{
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 5ae502b..348714e 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -70,9 +70,14 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
{
scu_enable(shmobile_scu_base);
- /* Map the reset vector (in headsmp-scu.S) */
+ /*
+ * Map the general reset vector that is hit from multiple paths:
+ * - Primary CPU resume at wakeup time
+ * - Secondary startup at boot time
+ * - Secondary startup at wakeup time
+ */
__raw_writel(0, APARMBAREA); /* 4k */
- __raw_writel(__pa(shmobile_secondary_vector_scu), SBAR);
+ __raw_writel(__pa(sh73a0_reset_vector), SBAR);
/* enable cache coherency on booting CPU */
scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 0/2] ARM: shmobile: sh73a0 Suspend-to-RAM
2013-03-21 13:31 ` Bastian Hecht
(?)
(?)
@ 2013-03-21 13:36 ` Bastian Hecht
-1 siblings, 0 replies; 11+ messages in thread
From: Bastian Hecht @ 2013-03-21 13:36 UTC (permalink / raw)
To: linux-arm-kernel
I titled patch 1/2 as [Workaround 1/2] and the message is considered
potential spam, so it might appear a bit later after moderator
approval. This only applies to linux-arm-kernel at lists.infradead.org.
2013/3/21 Bastian Hecht <hechtb@gmail.com>:
> Here is a patch for shutting down the CPU0 to Power Off mode during
> SUSPEND-to-RAM (in which case CPU1 is already shut down to Power Off mode
> due to CPU hotplug).
>
> While patch 2/2 implements this, we face some unresolved problems with the
> interrupt controller code. See: "[PATCH] input: st1232: Add IRQF_NO_SUSPEND flag"
> posted on 14th of February. This problem makes us unable to use the touchscreen
> as a wakeup source. I consider patch 2/2 sane in itself though, and we
> should consider merging it.
>
> To test Suspend-to-RAM, patch 1/2 is supplied that is a workaround to the problem.
>
> When I use the gpio keys in general (and as wakeup source), I get
> ------------[ cut here ]------------
> WARNING: at drivers/tty/tty_buffer.c:428 flush_to_ldisc+0x44/0x1a0()
> tty is NULL
> I suppose this is another independent problem to this code.
>
> Side note for future work: On the way to CPUIdle we might want to use
> CPUIDLE_FLAG_COUPLED that enables us to coordinate the shutdown of both CPUs.
>
> The patches are based on Simon's renesas/next branch.
>
> Bastian Hecht (2):
> input: st1232: Add IRQF_NO_SUSPEND flag
> ARM: shmobile: sh73a0: Suspend-to-RAM Power Off mode
>
> arch/arm/mach-shmobile/Makefile | 2 +-
> arch/arm/mach-shmobile/headsmp-sh73a0.S | 72 ++++++++++++++++++++++++++
> arch/arm/mach-shmobile/include/mach/common.h | 1 +
> arch/arm/mach-shmobile/pm-sh73a0.c | 32 ++++++++++--
> arch/arm/mach-shmobile/smp-sh73a0.c | 2 +-
> drivers/input/touchscreen/st1232.c | 2 +-
> 6 files changed, 104 insertions(+), 7 deletions(-)
> create mode 100644 arch/arm/mach-shmobile/headsmp-sh73a0.S
>
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 0/2] ARM: shmobile: sh73a0 Suspend-to-RAM
2013-03-21 13:31 ` Bastian Hecht
@ 2013-03-27 5:49 ` Simon Horman
-1 siblings, 0 replies; 11+ messages in thread
From: Simon Horman @ 2013-03-27 5:49 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Mar 21, 2013 at 02:31:35PM +0100, Bastian Hecht wrote:
> Here is a patch for shutting down the CPU0 to Power Off mode during
> SUSPEND-to-RAM (in which case CPU1 is already shut down to Power Off mode
> due to CPU hotplug).
>
> While patch 2/2 implements this, we face some unresolved problems with the
> interrupt controller code. See: "[PATCH] input: st1232: Add IRQF_NO_SUSPEND flag"
> posted on 14th of February. This problem makes us unable to use the touchscreen
> as a wakeup source. I consider patch 2/2 sane in itself though, and we
> should consider merging it.
>
> To test Suspend-to-RAM, patch 1/2 is supplied that is a workaround to the problem.
>
> When I use the gpio keys in general (and as wakeup source), I get
> ------------[ cut here ]------------
> WARNING: at drivers/tty/tty_buffer.c:428 flush_to_ldisc+0x44/0x1a0()
> tty is NULL
> I suppose this is another independent problem to this code.
>
> Side note for future work: On the way to CPUIdle we might want to use
> CPUIDLE_FLAG_COUPLED that enables us to coordinate the shutdown of both CPUs.
>
> The patches are based on Simon's renesas/next branch.
I'm a little reticent to accept this change with two known problems
unless we are absolutely sure the problems are orthogonal.
> Bastian Hecht (2):
> input: st1232: Add IRQF_NO_SUSPEND flag
> ARM: shmobile: sh73a0: Suspend-to-RAM Power Off mode
>
> arch/arm/mach-shmobile/Makefile | 2 +-
> arch/arm/mach-shmobile/headsmp-sh73a0.S | 72 ++++++++++++++++++++++++++
> arch/arm/mach-shmobile/include/mach/common.h | 1 +
> arch/arm/mach-shmobile/pm-sh73a0.c | 32 ++++++++++--
> arch/arm/mach-shmobile/smp-sh73a0.c | 2 +-
> drivers/input/touchscreen/st1232.c | 2 +-
> 6 files changed, 104 insertions(+), 7 deletions(-)
> create mode 100644 arch/arm/mach-shmobile/headsmp-sh73a0.S
>
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 0/2] ARM: shmobile: sh73a0 Suspend-to-RAM
@ 2013-03-27 5:49 ` Simon Horman
0 siblings, 0 replies; 11+ messages in thread
From: Simon Horman @ 2013-03-27 5:49 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Mar 21, 2013 at 02:31:35PM +0100, Bastian Hecht wrote:
> Here is a patch for shutting down the CPU0 to Power Off mode during
> SUSPEND-to-RAM (in which case CPU1 is already shut down to Power Off mode
> due to CPU hotplug).
>
> While patch 2/2 implements this, we face some unresolved problems with the
> interrupt controller code. See: "[PATCH] input: st1232: Add IRQF_NO_SUSPEND flag"
> posted on 14th of February. This problem makes us unable to use the touchscreen
> as a wakeup source. I consider patch 2/2 sane in itself though, and we
> should consider merging it.
>
> To test Suspend-to-RAM, patch 1/2 is supplied that is a workaround to the problem.
>
> When I use the gpio keys in general (and as wakeup source), I get
> ------------[ cut here ]------------
> WARNING: at drivers/tty/tty_buffer.c:428 flush_to_ldisc+0x44/0x1a0()
> tty is NULL
> I suppose this is another independent problem to this code.
>
> Side note for future work: On the way to CPUIdle we might want to use
> CPUIDLE_FLAG_COUPLED that enables us to coordinate the shutdown of both CPUs.
>
> The patches are based on Simon's renesas/next branch.
I'm a little reticent to accept this change with two known problems
unless we are absolutely sure the problems are orthogonal.
> Bastian Hecht (2):
> input: st1232: Add IRQF_NO_SUSPEND flag
> ARM: shmobile: sh73a0: Suspend-to-RAM Power Off mode
>
> arch/arm/mach-shmobile/Makefile | 2 +-
> arch/arm/mach-shmobile/headsmp-sh73a0.S | 72 ++++++++++++++++++++++++++
> arch/arm/mach-shmobile/include/mach/common.h | 1 +
> arch/arm/mach-shmobile/pm-sh73a0.c | 32 ++++++++++--
> arch/arm/mach-shmobile/smp-sh73a0.c | 2 +-
> drivers/input/touchscreen/st1232.c | 2 +-
> 6 files changed, 104 insertions(+), 7 deletions(-)
> create mode 100644 arch/arm/mach-shmobile/headsmp-sh73a0.S
>
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] ARM: shmobile: sh73a0: Suspend-to-RAM Power Off mode
2013-03-21 13:31 ` Bastian Hecht
@ 2013-04-09 13:25 ` Simon Horman
-1 siblings, 0 replies; 11+ messages in thread
From: Simon Horman @ 2013-04-09 13:25 UTC (permalink / raw)
To: linux-arm-kernel
On 木, 3月 21, 2013 at 02:31:37午後 +0100, Bastian Hecht wrote:
> We add Power Off mode defined by the ARM architecture as our
> Suspend-to-RAM mechanism. Here the L2 cache keeps its power and we only
> take care to flush the L1. Different startup paths are added for the two
> CPUs, one leading to cpu_resume() and the other to secondary_startup().
>
> Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Bastian, could you please let me know about the status of this patch?
Is it awaiting review?
> ---
> arch/arm/mach-shmobile/Makefile | 2 +-
> arch/arm/mach-shmobile/headsmp-sh73a0.S | 72 ++++++++++++++++++++++++++
> arch/arm/mach-shmobile/include/mach/common.h | 1 +
> arch/arm/mach-shmobile/pm-sh73a0.c | 32 ++++++++++--
> arch/arm/mach-shmobile/smp-sh73a0.c | 9 +++-
> 5 files changed, 109 insertions(+), 7 deletions(-)
> create mode 100644 arch/arm/mach-shmobile/headsmp-sh73a0.S
>
> diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
> index c621edf..1d33d89 100644
> --- a/arch/arm/mach-shmobile/Makefile
> +++ b/arch/arm/mach-shmobile/Makefile
> @@ -14,7 +14,7 @@ obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o
>
> # SMP objects
> smp-y := platsmp.o headsmp.o
> -smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o
> +smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-sh73a0.o headsmp-scu.o
> smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o
> smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o
>
> diff --git a/arch/arm/mach-shmobile/headsmp-sh73a0.S b/arch/arm/mach-shmobile/headsmp-sh73a0.S
> new file mode 100644
> index 0000000..6ffed46
> --- /dev/null
> +++ b/arch/arm/mach-shmobile/headsmp-sh73a0.S
> @@ -0,0 +1,72 @@
> +/*
> + * SMP support for SoC sh73a0
> + *
> + * Copyright (C) 2013 Bastian Hecht
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/linkage.h>
> +#include <linux/init.h>
> +#include <asm/memory.h>
> +
> + __CPUINIT
> +
> +ENTRY(sh73a0_primary_resume)
> + bl v7_invalidate_l1
> + b cpu_resume
> +ENDPROC(sh73a0_primary_resume)
> +
> +ENTRY(sh73a0_secondary_startup)
> + bl v7_invalidate_l1
> + b secondary_startup
> +ENDPROC(sh73a0_primary_resume)
> +
> +/*
> + * Reset vector for both CPUs.
> + *
> + * This function will be mapped to address 0 by the SBAR register and is the
> + * general wakeup vector.
> + * For both CPUs we need to set the SCU power flag to Run Mode and invalidate
> + * the L1 cache so no random data get flushed out later.
> + * We can't use v7_invalidate_l1() directly as a normal branch is out of range
> + * here and so we need a long jump. We jump to the physical address as the
> + * MMU is still turned off.
> + *
> + * We do not need to worry about CPU1 running ahead of CPU0 as the secondary
> + * CPU of the sh73a0 needs to be woken using the WUPCR register. This is done
> + * in sh73a0_boot_secondary().
> + */
> + .align 12
> +ENTRY(sh73a0_reset_vector)
> + /* Retrieve the CPU ID and keep it in r4 */
> + mrc p15, 0, r4, c0, c0, 5 @ read MIPDR
> + and r4, r4, #3 @ mask out cpu ID
> +
> + /*
> + * We clear the SCU Power status flag to prepare for the
> + * L1 coherency mode
> + */
> + mov r0, r4 @ copy CPU ID
> + lsl r0, r0, #3 @ we will shift by cpu_id * 8 bits
> + ldr r1, 3f
> + ldr r1, [r1] @ SCU base address
> + ldr r2, [r1, #8] @ SCU Power Status Register
> + mov r3, #3
> + bic r2, r2, r3, lsl r0 @ Clear bits of our CPU (Run Mode)
> + str r2, [r1, #8] @ write back
> +
> + /*
> + * Depending on the CPU ID we either resume our primary core from
> + * sleeping or bring up the secondary CPU
> + */
> + cmp r4, #0 @ if CPU0
> + ldreq pc, 1f @ jump to sh73a0_primary_resume
> + ldr pc, 2f @ jump to sh73a0_secondary_startup
> +
> +1: .long sh73a0_primary_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET
> +2: .long sh73a0_secondary_startup - PAGE_OFFSET + PLAT_PHYS_OFFSET
> +3: .long shmobile_scu_base - PAGE_OFFSET + PLAT_PHYS_OFFSET
> +ENDPROC(sh73a0_reset_vector)
> diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
> index 03f73de..842bb35 100644
> --- a/arch/arm/mach-shmobile/include/mach/common.h
> +++ b/arch/arm/mach-shmobile/include/mach/common.h
> @@ -45,6 +45,7 @@ extern void sh73a0_add_standard_devices_dt(void);
> extern void sh73a0_clock_init(void);
> extern void sh73a0_pinmux_init(void);
> extern void sh73a0_pm_init(void);
> +extern void sh73a0_reset_vector(void);
> extern struct clk sh73a0_extal1_clk;
> extern struct clk sh73a0_extal2_clk;
> extern struct clk sh73a0_extcki_clk;
> diff --git a/arch/arm/mach-shmobile/pm-sh73a0.c b/arch/arm/mach-shmobile/pm-sh73a0.c
> index 99086e9..7e8e0a1 100644
> --- a/arch/arm/mach-shmobile/pm-sh73a0.c
> +++ b/arch/arm/mach-shmobile/pm-sh73a0.c
> @@ -1,30 +1,54 @@
> /*
> * sh73a0 Power management support
> *
> - * Copyright (C) 2012 Bastian Hecht <hechtb+renesas@gmail.com>
> + * Copyright (C) 2013 Bastian Hecht <hechtb+renesas@gmail.com>
> *
> * This file is subject to the terms and conditions of the GNU General Public
> * License. See the file "COPYING" in the main directory of this archive
> * for more details.
> */
>
> +#include <linux/cpuidle.h>
> +#include <linux/module.h>
> #include <linux/suspend.h>
> +#include <linux/io.h>
> +#include <asm/cacheflush.h>
> +#include <asm/smp_scu.h>
> +#include <asm/suspend.h>
> #include <mach/common.h>
>
> #ifdef CONFIG_SUSPEND
> -static int sh73a0_enter_suspend(suspend_state_t suspend_state)
> +/*
> + * sh73a0_do_poweroff: Power off the main CPU
> + *
> + * The L2 cache doesn't loose power in Power Off mode - ignore it.
> + * After flushing the L1 cache we don't take care to disable it as we
> + * only work on temporary values in a UP environment and it gets invalidated
> + * on startup. Just straight take down the ARM core.
> + */
> +static int sh73a0_do_poweroff(unsigned long unused)
> {
> + flush_cache_all();
> + scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF);
> cpu_do_idle();
> +
> + return 0;
> +}
> +
> +static int sh73a0_enter_poweroff_suspend(suspend_state_t suspend_state)
> +{
> + cpu_suspend(0, sh73a0_do_poweroff);
> +
> return 0;
> }
>
> static void sh73a0_suspend_init(void)
> {
> - shmobile_suspend_ops.enter = sh73a0_enter_suspend;
> + shmobile_suspend_ops.enter = sh73a0_enter_poweroff_suspend;
> }
> #else
> static void sh73a0_suspend_init(void) {}
> -#endif
> +#endif /* CONFIG_SUSPEND */
>
> void __init sh73a0_pm_init(void)
> {
> diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
> index 5ae502b..348714e 100644
> --- a/arch/arm/mach-shmobile/smp-sh73a0.c
> +++ b/arch/arm/mach-shmobile/smp-sh73a0.c
> @@ -70,9 +70,14 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
> {
> scu_enable(shmobile_scu_base);
>
> - /* Map the reset vector (in headsmp-scu.S) */
> + /*
> + * Map the general reset vector that is hit from multiple paths:
> + * - Primary CPU resume at wakeup time
> + * - Secondary startup at boot time
> + * - Secondary startup at wakeup time
> + */
> __raw_writel(0, APARMBAREA); /* 4k */
> - __raw_writel(__pa(shmobile_secondary_vector_scu), SBAR);
> + __raw_writel(__pa(sh73a0_reset_vector), SBAR);
>
> /* enable cache coherency on booting CPU */
> scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 2/2] ARM: shmobile: sh73a0: Suspend-to-RAM Power Off mode
@ 2013-04-09 13:25 ` Simon Horman
0 siblings, 0 replies; 11+ messages in thread
From: Simon Horman @ 2013-04-09 13:25 UTC (permalink / raw)
To: linux-arm-kernel
On ?, 3? 21, 2013 at 02:31:37?? +0100, Bastian Hecht wrote:
> We add Power Off mode defined by the ARM architecture as our
> Suspend-to-RAM mechanism. Here the L2 cache keeps its power and we only
> take care to flush the L1. Different startup paths are added for the two
> CPUs, one leading to cpu_resume() and the other to secondary_startup().
>
> Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Bastian, could you please let me know about the status of this patch?
Is it awaiting review?
> ---
> arch/arm/mach-shmobile/Makefile | 2 +-
> arch/arm/mach-shmobile/headsmp-sh73a0.S | 72 ++++++++++++++++++++++++++
> arch/arm/mach-shmobile/include/mach/common.h | 1 +
> arch/arm/mach-shmobile/pm-sh73a0.c | 32 ++++++++++--
> arch/arm/mach-shmobile/smp-sh73a0.c | 9 +++-
> 5 files changed, 109 insertions(+), 7 deletions(-)
> create mode 100644 arch/arm/mach-shmobile/headsmp-sh73a0.S
>
> diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
> index c621edf..1d33d89 100644
> --- a/arch/arm/mach-shmobile/Makefile
> +++ b/arch/arm/mach-shmobile/Makefile
> @@ -14,7 +14,7 @@ obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o
>
> # SMP objects
> smp-y := platsmp.o headsmp.o
> -smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o
> +smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-sh73a0.o headsmp-scu.o
> smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o
> smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o
>
> diff --git a/arch/arm/mach-shmobile/headsmp-sh73a0.S b/arch/arm/mach-shmobile/headsmp-sh73a0.S
> new file mode 100644
> index 0000000..6ffed46
> --- /dev/null
> +++ b/arch/arm/mach-shmobile/headsmp-sh73a0.S
> @@ -0,0 +1,72 @@
> +/*
> + * SMP support for SoC sh73a0
> + *
> + * Copyright (C) 2013 Bastian Hecht
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/linkage.h>
> +#include <linux/init.h>
> +#include <asm/memory.h>
> +
> + __CPUINIT
> +
> +ENTRY(sh73a0_primary_resume)
> + bl v7_invalidate_l1
> + b cpu_resume
> +ENDPROC(sh73a0_primary_resume)
> +
> +ENTRY(sh73a0_secondary_startup)
> + bl v7_invalidate_l1
> + b secondary_startup
> +ENDPROC(sh73a0_primary_resume)
> +
> +/*
> + * Reset vector for both CPUs.
> + *
> + * This function will be mapped to address 0 by the SBAR register and is the
> + * general wakeup vector.
> + * For both CPUs we need to set the SCU power flag to Run Mode and invalidate
> + * the L1 cache so no random data get flushed out later.
> + * We can't use v7_invalidate_l1() directly as a normal branch is out of range
> + * here and so we need a long jump. We jump to the physical address as the
> + * MMU is still turned off.
> + *
> + * We do not need to worry about CPU1 running ahead of CPU0 as the secondary
> + * CPU of the sh73a0 needs to be woken using the WUPCR register. This is done
> + * in sh73a0_boot_secondary().
> + */
> + .align 12
> +ENTRY(sh73a0_reset_vector)
> + /* Retrieve the CPU ID and keep it in r4 */
> + mrc p15, 0, r4, c0, c0, 5 @ read MIPDR
> + and r4, r4, #3 @ mask out cpu ID
> +
> + /*
> + * We clear the SCU Power status flag to prepare for the
> + * L1 coherency mode
> + */
> + mov r0, r4 @ copy CPU ID
> + lsl r0, r0, #3 @ we will shift by cpu_id * 8 bits
> + ldr r1, 3f
> + ldr r1, [r1] @ SCU base address
> + ldr r2, [r1, #8] @ SCU Power Status Register
> + mov r3, #3
> + bic r2, r2, r3, lsl r0 @ Clear bits of our CPU (Run Mode)
> + str r2, [r1, #8] @ write back
> +
> + /*
> + * Depending on the CPU ID we either resume our primary core from
> + * sleeping or bring up the secondary CPU
> + */
> + cmp r4, #0 @ if CPU0
> + ldreq pc, 1f @ jump to sh73a0_primary_resume
> + ldr pc, 2f @ jump to sh73a0_secondary_startup
> +
> +1: .long sh73a0_primary_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET
> +2: .long sh73a0_secondary_startup - PAGE_OFFSET + PLAT_PHYS_OFFSET
> +3: .long shmobile_scu_base - PAGE_OFFSET + PLAT_PHYS_OFFSET
> +ENDPROC(sh73a0_reset_vector)
> diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
> index 03f73de..842bb35 100644
> --- a/arch/arm/mach-shmobile/include/mach/common.h
> +++ b/arch/arm/mach-shmobile/include/mach/common.h
> @@ -45,6 +45,7 @@ extern void sh73a0_add_standard_devices_dt(void);
> extern void sh73a0_clock_init(void);
> extern void sh73a0_pinmux_init(void);
> extern void sh73a0_pm_init(void);
> +extern void sh73a0_reset_vector(void);
> extern struct clk sh73a0_extal1_clk;
> extern struct clk sh73a0_extal2_clk;
> extern struct clk sh73a0_extcki_clk;
> diff --git a/arch/arm/mach-shmobile/pm-sh73a0.c b/arch/arm/mach-shmobile/pm-sh73a0.c
> index 99086e9..7e8e0a1 100644
> --- a/arch/arm/mach-shmobile/pm-sh73a0.c
> +++ b/arch/arm/mach-shmobile/pm-sh73a0.c
> @@ -1,30 +1,54 @@
> /*
> * sh73a0 Power management support
> *
> - * Copyright (C) 2012 Bastian Hecht <hechtb+renesas@gmail.com>
> + * Copyright (C) 2013 Bastian Hecht <hechtb+renesas@gmail.com>
> *
> * This file is subject to the terms and conditions of the GNU General Public
> * License. See the file "COPYING" in the main directory of this archive
> * for more details.
> */
>
> +#include <linux/cpuidle.h>
> +#include <linux/module.h>
> #include <linux/suspend.h>
> +#include <linux/io.h>
> +#include <asm/cacheflush.h>
> +#include <asm/smp_scu.h>
> +#include <asm/suspend.h>
> #include <mach/common.h>
>
> #ifdef CONFIG_SUSPEND
> -static int sh73a0_enter_suspend(suspend_state_t suspend_state)
> +/*
> + * sh73a0_do_poweroff: Power off the main CPU
> + *
> + * The L2 cache doesn't loose power in Power Off mode - ignore it.
> + * After flushing the L1 cache we don't take care to disable it as we
> + * only work on temporary values in a UP environment and it gets invalidated
> + * on startup. Just straight take down the ARM core.
> + */
> +static int sh73a0_do_poweroff(unsigned long unused)
> {
> + flush_cache_all();
> + scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF);
> cpu_do_idle();
> +
> + return 0;
> +}
> +
> +static int sh73a0_enter_poweroff_suspend(suspend_state_t suspend_state)
> +{
> + cpu_suspend(0, sh73a0_do_poweroff);
> +
> return 0;
> }
>
> static void sh73a0_suspend_init(void)
> {
> - shmobile_suspend_ops.enter = sh73a0_enter_suspend;
> + shmobile_suspend_ops.enter = sh73a0_enter_poweroff_suspend;
> }
> #else
> static void sh73a0_suspend_init(void) {}
> -#endif
> +#endif /* CONFIG_SUSPEND */
>
> void __init sh73a0_pm_init(void)
> {
> diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
> index 5ae502b..348714e 100644
> --- a/arch/arm/mach-shmobile/smp-sh73a0.c
> +++ b/arch/arm/mach-shmobile/smp-sh73a0.c
> @@ -70,9 +70,14 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
> {
> scu_enable(shmobile_scu_base);
>
> - /* Map the reset vector (in headsmp-scu.S) */
> + /*
> + * Map the general reset vector that is hit from multiple paths:
> + * - Primary CPU resume at wakeup time
> + * - Secondary startup at boot time
> + * - Secondary startup at wakeup time
> + */
> __raw_writel(0, APARMBAREA); /* 4k */
> - __raw_writel(__pa(shmobile_secondary_vector_scu), SBAR);
> + __raw_writel(__pa(sh73a0_reset_vector), SBAR);
>
> /* enable cache coherency on booting CPU */
> scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] ARM: shmobile: sh73a0: Suspend-to-RAM Power Off mode
2013-04-09 13:25 ` Simon Horman
@ 2013-04-09 15:02 ` Bastian Hecht
-1 siblings, 0 replies; 11+ messages in thread
From: Bastian Hecht @ 2013-04-09 15:02 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon,
2013/4/9 Simon Horman <horms@verge.net.au>:
> On 木, 3月 21, 2013 at 02:31:37午後 +0100, Bastian Hecht wrote:
>> We add Power Off mode defined by the ARM architecture as our
>> Suspend-to-RAM mechanism. Here the L2 cache keeps its power and we only
>> take care to flush the L1. Different startup paths are added for the two
>> CPUs, one leading to cpu_resume() and the other to secondary_startup().
>>
>> Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
>
> Bastian, could you please let me know about the status of this patch?
> Is it awaiting review?
I want to have a look again at the part with the L1 take down, my code
might be incorrect there although I experienced no adverse effects.
Before that I want to get the r8a7740 PM code merged.
I've posted a patch "ARM: shmobile: r8a7740: Add power down modes and
CPUIdle". I will post a fresh patch tomorrow I think with a stripped
down version. I will remove Core Standby Mode for which it is unclear
why we need to flush the L2 cache.
Thanks,
Bastian
>> ---
>> arch/arm/mach-shmobile/Makefile | 2 +-
>> arch/arm/mach-shmobile/headsmp-sh73a0.S | 72 ++++++++++++++++++++++++++
>> arch/arm/mach-shmobile/include/mach/common.h | 1 +
>> arch/arm/mach-shmobile/pm-sh73a0.c | 32 ++++++++++--
>> arch/arm/mach-shmobile/smp-sh73a0.c | 9 +++-
>> 5 files changed, 109 insertions(+), 7 deletions(-)
>> create mode 100644 arch/arm/mach-shmobile/headsmp-sh73a0.S
>>
>> diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
>> index c621edf..1d33d89 100644
>> --- a/arch/arm/mach-shmobile/Makefile
>> +++ b/arch/arm/mach-shmobile/Makefile
>> @@ -14,7 +14,7 @@ obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o
>>
>> # SMP objects
>> smp-y := platsmp.o headsmp.o
>> -smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o
>> +smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-sh73a0.o headsmp-scu.o
>> smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o
>> smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o
>>
>> diff --git a/arch/arm/mach-shmobile/headsmp-sh73a0.S b/arch/arm/mach-shmobile/headsmp-sh73a0.S
>> new file mode 100644
>> index 0000000..6ffed46
>> --- /dev/null
>> +++ b/arch/arm/mach-shmobile/headsmp-sh73a0.S
>> @@ -0,0 +1,72 @@
>> +/*
>> + * SMP support for SoC sh73a0
>> + *
>> + * Copyright (C) 2013 Bastian Hecht
>> + *
>> + * This file is licensed under the terms of the GNU General Public
>> + * License version 2. This program is licensed "as is" without any
>> + * warranty of any kind, whether express or implied.
>> + */
>> +
>> +#include <linux/linkage.h>
>> +#include <linux/init.h>
>> +#include <asm/memory.h>
>> +
>> + __CPUINIT
>> +
>> +ENTRY(sh73a0_primary_resume)
>> + bl v7_invalidate_l1
>> + b cpu_resume
>> +ENDPROC(sh73a0_primary_resume)
>> +
>> +ENTRY(sh73a0_secondary_startup)
>> + bl v7_invalidate_l1
>> + b secondary_startup
>> +ENDPROC(sh73a0_primary_resume)
>> +
>> +/*
>> + * Reset vector for both CPUs.
>> + *
>> + * This function will be mapped to address 0 by the SBAR register and is the
>> + * general wakeup vector.
>> + * For both CPUs we need to set the SCU power flag to Run Mode and invalidate
>> + * the L1 cache so no random data get flushed out later.
>> + * We can't use v7_invalidate_l1() directly as a normal branch is out of range
>> + * here and so we need a long jump. We jump to the physical address as the
>> + * MMU is still turned off.
>> + *
>> + * We do not need to worry about CPU1 running ahead of CPU0 as the secondary
>> + * CPU of the sh73a0 needs to be woken using the WUPCR register. This is done
>> + * in sh73a0_boot_secondary().
>> + */
>> + .align 12
>> +ENTRY(sh73a0_reset_vector)
>> + /* Retrieve the CPU ID and keep it in r4 */
>> + mrc p15, 0, r4, c0, c0, 5 @ read MIPDR
>> + and r4, r4, #3 @ mask out cpu ID
>> +
>> + /*
>> + * We clear the SCU Power status flag to prepare for the
>> + * L1 coherency mode
>> + */
>> + mov r0, r4 @ copy CPU ID
>> + lsl r0, r0, #3 @ we will shift by cpu_id * 8 bits
>> + ldr r1, 3f
>> + ldr r1, [r1] @ SCU base address
>> + ldr r2, [r1, #8] @ SCU Power Status Register
>> + mov r3, #3
>> + bic r2, r2, r3, lsl r0 @ Clear bits of our CPU (Run Mode)
>> + str r2, [r1, #8] @ write back
>> +
>> + /*
>> + * Depending on the CPU ID we either resume our primary core from
>> + * sleeping or bring up the secondary CPU
>> + */
>> + cmp r4, #0 @ if CPU0
>> + ldreq pc, 1f @ jump to sh73a0_primary_resume
>> + ldr pc, 2f @ jump to sh73a0_secondary_startup
>> +
>> +1: .long sh73a0_primary_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET
>> +2: .long sh73a0_secondary_startup - PAGE_OFFSET + PLAT_PHYS_OFFSET
>> +3: .long shmobile_scu_base - PAGE_OFFSET + PLAT_PHYS_OFFSET
>> +ENDPROC(sh73a0_reset_vector)
>> diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
>> index 03f73de..842bb35 100644
>> --- a/arch/arm/mach-shmobile/include/mach/common.h
>> +++ b/arch/arm/mach-shmobile/include/mach/common.h
>> @@ -45,6 +45,7 @@ extern void sh73a0_add_standard_devices_dt(void);
>> extern void sh73a0_clock_init(void);
>> extern void sh73a0_pinmux_init(void);
>> extern void sh73a0_pm_init(void);
>> +extern void sh73a0_reset_vector(void);
>> extern struct clk sh73a0_extal1_clk;
>> extern struct clk sh73a0_extal2_clk;
>> extern struct clk sh73a0_extcki_clk;
>> diff --git a/arch/arm/mach-shmobile/pm-sh73a0.c b/arch/arm/mach-shmobile/pm-sh73a0.c
>> index 99086e9..7e8e0a1 100644
>> --- a/arch/arm/mach-shmobile/pm-sh73a0.c
>> +++ b/arch/arm/mach-shmobile/pm-sh73a0.c
>> @@ -1,30 +1,54 @@
>> /*
>> * sh73a0 Power management support
>> *
>> - * Copyright (C) 2012 Bastian Hecht <hechtb+renesas@gmail.com>
>> + * Copyright (C) 2013 Bastian Hecht <hechtb+renesas@gmail.com>
>> *
>> * This file is subject to the terms and conditions of the GNU General Public
>> * License. See the file "COPYING" in the main directory of this archive
>> * for more details.
>> */
>>
>> +#include <linux/cpuidle.h>
>> +#include <linux/module.h>
>> #include <linux/suspend.h>
>> +#include <linux/io.h>
>> +#include <asm/cacheflush.h>
>> +#include <asm/smp_scu.h>
>> +#include <asm/suspend.h>
>> #include <mach/common.h>
>>
>> #ifdef CONFIG_SUSPEND
>> -static int sh73a0_enter_suspend(suspend_state_t suspend_state)
>> +/*
>> + * sh73a0_do_poweroff: Power off the main CPU
>> + *
>> + * The L2 cache doesn't loose power in Power Off mode - ignore it.
>> + * After flushing the L1 cache we don't take care to disable it as we
>> + * only work on temporary values in a UP environment and it gets invalidated
>> + * on startup. Just straight take down the ARM core.
>> + */
>> +static int sh73a0_do_poweroff(unsigned long unused)
>> {
>> + flush_cache_all();
>> + scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF);
>> cpu_do_idle();
>> +
>> + return 0;
>> +}
>> +
>> +static int sh73a0_enter_poweroff_suspend(suspend_state_t suspend_state)
>> +{
>> + cpu_suspend(0, sh73a0_do_poweroff);
>> +
>> return 0;
>> }
>>
>> static void sh73a0_suspend_init(void)
>> {
>> - shmobile_suspend_ops.enter = sh73a0_enter_suspend;
>> + shmobile_suspend_ops.enter = sh73a0_enter_poweroff_suspend;
>> }
>> #else
>> static void sh73a0_suspend_init(void) {}
>> -#endif
>> +#endif /* CONFIG_SUSPEND */
>>
>> void __init sh73a0_pm_init(void)
>> {
>> diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
>> index 5ae502b..348714e 100644
>> --- a/arch/arm/mach-shmobile/smp-sh73a0.c
>> +++ b/arch/arm/mach-shmobile/smp-sh73a0.c
>> @@ -70,9 +70,14 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
>> {
>> scu_enable(shmobile_scu_base);
>>
>> - /* Map the reset vector (in headsmp-scu.S) */
>> + /*
>> + * Map the general reset vector that is hit from multiple paths:
>> + * - Primary CPU resume at wakeup time
>> + * - Secondary startup at boot time
>> + * - Secondary startup at wakeup time
>> + */
>> __raw_writel(0, APARMBAREA); /* 4k */
>> - __raw_writel(__pa(shmobile_secondary_vector_scu), SBAR);
>> + __raw_writel(__pa(sh73a0_reset_vector), SBAR);
>>
>> /* enable cache coherency on booting CPU */
>> scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
>> --
>> 1.7.9.5
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 2/2] ARM: shmobile: sh73a0: Suspend-to-RAM Power Off mode
@ 2013-04-09 15:02 ` Bastian Hecht
0 siblings, 0 replies; 11+ messages in thread
From: Bastian Hecht @ 2013-04-09 15:02 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon,
2013/4/9 Simon Horman <horms@verge.net.au>:
> On ?, 3? 21, 2013 at 02:31:37?? +0100, Bastian Hecht wrote:
>> We add Power Off mode defined by the ARM architecture as our
>> Suspend-to-RAM mechanism. Here the L2 cache keeps its power and we only
>> take care to flush the L1. Different startup paths are added for the two
>> CPUs, one leading to cpu_resume() and the other to secondary_startup().
>>
>> Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
>
> Bastian, could you please let me know about the status of this patch?
> Is it awaiting review?
I want to have a look again at the part with the L1 take down, my code
might be incorrect there although I experienced no adverse effects.
Before that I want to get the r8a7740 PM code merged.
I've posted a patch "ARM: shmobile: r8a7740: Add power down modes and
CPUIdle". I will post a fresh patch tomorrow I think with a stripped
down version. I will remove Core Standby Mode for which it is unclear
why we need to flush the L2 cache.
Thanks,
Bastian
>> ---
>> arch/arm/mach-shmobile/Makefile | 2 +-
>> arch/arm/mach-shmobile/headsmp-sh73a0.S | 72 ++++++++++++++++++++++++++
>> arch/arm/mach-shmobile/include/mach/common.h | 1 +
>> arch/arm/mach-shmobile/pm-sh73a0.c | 32 ++++++++++--
>> arch/arm/mach-shmobile/smp-sh73a0.c | 9 +++-
>> 5 files changed, 109 insertions(+), 7 deletions(-)
>> create mode 100644 arch/arm/mach-shmobile/headsmp-sh73a0.S
>>
>> diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
>> index c621edf..1d33d89 100644
>> --- a/arch/arm/mach-shmobile/Makefile
>> +++ b/arch/arm/mach-shmobile/Makefile
>> @@ -14,7 +14,7 @@ obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o
>>
>> # SMP objects
>> smp-y := platsmp.o headsmp.o
>> -smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o
>> +smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-sh73a0.o headsmp-scu.o
>> smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o
>> smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o
>>
>> diff --git a/arch/arm/mach-shmobile/headsmp-sh73a0.S b/arch/arm/mach-shmobile/headsmp-sh73a0.S
>> new file mode 100644
>> index 0000000..6ffed46
>> --- /dev/null
>> +++ b/arch/arm/mach-shmobile/headsmp-sh73a0.S
>> @@ -0,0 +1,72 @@
>> +/*
>> + * SMP support for SoC sh73a0
>> + *
>> + * Copyright (C) 2013 Bastian Hecht
>> + *
>> + * This file is licensed under the terms of the GNU General Public
>> + * License version 2. This program is licensed "as is" without any
>> + * warranty of any kind, whether express or implied.
>> + */
>> +
>> +#include <linux/linkage.h>
>> +#include <linux/init.h>
>> +#include <asm/memory.h>
>> +
>> + __CPUINIT
>> +
>> +ENTRY(sh73a0_primary_resume)
>> + bl v7_invalidate_l1
>> + b cpu_resume
>> +ENDPROC(sh73a0_primary_resume)
>> +
>> +ENTRY(sh73a0_secondary_startup)
>> + bl v7_invalidate_l1
>> + b secondary_startup
>> +ENDPROC(sh73a0_primary_resume)
>> +
>> +/*
>> + * Reset vector for both CPUs.
>> + *
>> + * This function will be mapped to address 0 by the SBAR register and is the
>> + * general wakeup vector.
>> + * For both CPUs we need to set the SCU power flag to Run Mode and invalidate
>> + * the L1 cache so no random data get flushed out later.
>> + * We can't use v7_invalidate_l1() directly as a normal branch is out of range
>> + * here and so we need a long jump. We jump to the physical address as the
>> + * MMU is still turned off.
>> + *
>> + * We do not need to worry about CPU1 running ahead of CPU0 as the secondary
>> + * CPU of the sh73a0 needs to be woken using the WUPCR register. This is done
>> + * in sh73a0_boot_secondary().
>> + */
>> + .align 12
>> +ENTRY(sh73a0_reset_vector)
>> + /* Retrieve the CPU ID and keep it in r4 */
>> + mrc p15, 0, r4, c0, c0, 5 @ read MIPDR
>> + and r4, r4, #3 @ mask out cpu ID
>> +
>> + /*
>> + * We clear the SCU Power status flag to prepare for the
>> + * L1 coherency mode
>> + */
>> + mov r0, r4 @ copy CPU ID
>> + lsl r0, r0, #3 @ we will shift by cpu_id * 8 bits
>> + ldr r1, 3f
>> + ldr r1, [r1] @ SCU base address
>> + ldr r2, [r1, #8] @ SCU Power Status Register
>> + mov r3, #3
>> + bic r2, r2, r3, lsl r0 @ Clear bits of our CPU (Run Mode)
>> + str r2, [r1, #8] @ write back
>> +
>> + /*
>> + * Depending on the CPU ID we either resume our primary core from
>> + * sleeping or bring up the secondary CPU
>> + */
>> + cmp r4, #0 @ if CPU0
>> + ldreq pc, 1f @ jump to sh73a0_primary_resume
>> + ldr pc, 2f @ jump to sh73a0_secondary_startup
>> +
>> +1: .long sh73a0_primary_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET
>> +2: .long sh73a0_secondary_startup - PAGE_OFFSET + PLAT_PHYS_OFFSET
>> +3: .long shmobile_scu_base - PAGE_OFFSET + PLAT_PHYS_OFFSET
>> +ENDPROC(sh73a0_reset_vector)
>> diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
>> index 03f73de..842bb35 100644
>> --- a/arch/arm/mach-shmobile/include/mach/common.h
>> +++ b/arch/arm/mach-shmobile/include/mach/common.h
>> @@ -45,6 +45,7 @@ extern void sh73a0_add_standard_devices_dt(void);
>> extern void sh73a0_clock_init(void);
>> extern void sh73a0_pinmux_init(void);
>> extern void sh73a0_pm_init(void);
>> +extern void sh73a0_reset_vector(void);
>> extern struct clk sh73a0_extal1_clk;
>> extern struct clk sh73a0_extal2_clk;
>> extern struct clk sh73a0_extcki_clk;
>> diff --git a/arch/arm/mach-shmobile/pm-sh73a0.c b/arch/arm/mach-shmobile/pm-sh73a0.c
>> index 99086e9..7e8e0a1 100644
>> --- a/arch/arm/mach-shmobile/pm-sh73a0.c
>> +++ b/arch/arm/mach-shmobile/pm-sh73a0.c
>> @@ -1,30 +1,54 @@
>> /*
>> * sh73a0 Power management support
>> *
>> - * Copyright (C) 2012 Bastian Hecht <hechtb+renesas@gmail.com>
>> + * Copyright (C) 2013 Bastian Hecht <hechtb+renesas@gmail.com>
>> *
>> * This file is subject to the terms and conditions of the GNU General Public
>> * License. See the file "COPYING" in the main directory of this archive
>> * for more details.
>> */
>>
>> +#include <linux/cpuidle.h>
>> +#include <linux/module.h>
>> #include <linux/suspend.h>
>> +#include <linux/io.h>
>> +#include <asm/cacheflush.h>
>> +#include <asm/smp_scu.h>
>> +#include <asm/suspend.h>
>> #include <mach/common.h>
>>
>> #ifdef CONFIG_SUSPEND
>> -static int sh73a0_enter_suspend(suspend_state_t suspend_state)
>> +/*
>> + * sh73a0_do_poweroff: Power off the main CPU
>> + *
>> + * The L2 cache doesn't loose power in Power Off mode - ignore it.
>> + * After flushing the L1 cache we don't take care to disable it as we
>> + * only work on temporary values in a UP environment and it gets invalidated
>> + * on startup. Just straight take down the ARM core.
>> + */
>> +static int sh73a0_do_poweroff(unsigned long unused)
>> {
>> + flush_cache_all();
>> + scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF);
>> cpu_do_idle();
>> +
>> + return 0;
>> +}
>> +
>> +static int sh73a0_enter_poweroff_suspend(suspend_state_t suspend_state)
>> +{
>> + cpu_suspend(0, sh73a0_do_poweroff);
>> +
>> return 0;
>> }
>>
>> static void sh73a0_suspend_init(void)
>> {
>> - shmobile_suspend_ops.enter = sh73a0_enter_suspend;
>> + shmobile_suspend_ops.enter = sh73a0_enter_poweroff_suspend;
>> }
>> #else
>> static void sh73a0_suspend_init(void) {}
>> -#endif
>> +#endif /* CONFIG_SUSPEND */
>>
>> void __init sh73a0_pm_init(void)
>> {
>> diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
>> index 5ae502b..348714e 100644
>> --- a/arch/arm/mach-shmobile/smp-sh73a0.c
>> +++ b/arch/arm/mach-shmobile/smp-sh73a0.c
>> @@ -70,9 +70,14 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
>> {
>> scu_enable(shmobile_scu_base);
>>
>> - /* Map the reset vector (in headsmp-scu.S) */
>> + /*
>> + * Map the general reset vector that is hit from multiple paths:
>> + * - Primary CPU resume at wakeup time
>> + * - Secondary startup at boot time
>> + * - Secondary startup at wakeup time
>> + */
>> __raw_writel(0, APARMBAREA); /* 4k */
>> - __raw_writel(__pa(shmobile_secondary_vector_scu), SBAR);
>> + __raw_writel(__pa(sh73a0_reset_vector), SBAR);
>>
>> /* enable cache coherency on booting CPU */
>> scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
>> --
>> 1.7.9.5
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2013-04-09 15:02 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-03-21 13:31 [PATCH 0/2] ARM: shmobile: sh73a0 Suspend-to-RAM Bastian Hecht
2013-03-21 13:31 ` Bastian Hecht
2013-03-21 13:31 ` [PATCH 2/2] ARM: shmobile: sh73a0: Suspend-to-RAM Power Off mode Bastian Hecht
2013-03-21 13:31 ` Bastian Hecht
2013-04-09 13:25 ` Simon Horman
2013-04-09 13:25 ` Simon Horman
2013-04-09 15:02 ` Bastian Hecht
2013-04-09 15:02 ` Bastian Hecht
2013-03-21 13:36 ` [PATCH 0/2] ARM: shmobile: sh73a0 Suspend-to-RAM Bastian Hecht
2013-03-27 5:49 ` Simon Horman
2013-03-27 5:49 ` Simon Horman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.