All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v5 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
@ 2013-04-19 21:56 ` Sergei Shtylyov
  0 siblings, 0 replies; 10+ messages in thread
From: Sergei Shtylyov @ 2013-04-19 21:56 UTC (permalink / raw)
  To: linux-arm-kernel

USB EHCI, OHCI, and common PHY are the SoC devices but are wrongly defined and
registered in the Marzen board file.  Move the data and code to their proper
place in setup-r8a7779.c; while at it, we have to rename 8a7779_late_devices[]
to 8a7779_standard_devices[] -- this seems legitimate since they are registered
from r8a7779_add_standard_devices() anyway.

Note that I'm deliberately changing the USB PHY platform device's 'id' field
from (previously just omitted) 0 to -1 as the device is a single of its kind.

Note also that the board and SoC code have to be in one patch to keep the code
bisectable...

The patch has been tested on the Marzen board.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>

---
Changes since version 4:
- resolved reject in the 'board-marzen.c' file, refreshed the patch.

Changes since version 3:
- refreshed the 'board-marzen.c' file.

Changes since version 2:
- added a note about testing to the changelog;
- added ACKs from Simon Horman and Kuninori Morimoto.

Changes since the original posting:
- added a note about bisectability to the changelog.

 arch/arm/mach-shmobile/board-marzen.c         |  178 -------------------------
 arch/arm/mach-shmobile/include/mach/r8a7779.h |    1 
 arch/arm/mach-shmobile/setup-r8a7779.c        |  185 +++++++++++++++++++++++++-
 3 files changed, 184 insertions(+), 180 deletions(-)

Index: renesas/arch/arm/mach-shmobile/board-marzen.c
=================================--- renesas.orig/arch/arm/mach-shmobile/board-marzen.c
+++ renesas/arch/arm/mach-shmobile/board-marzen.c
@@ -37,10 +37,6 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <linux/pm_runtime.h>
 #include <mach/hardware.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
@@ -150,26 +146,6 @@ static struct platform_device hspi_devic
 	.num_resources	= ARRAY_SIZE(hspi_resources),
 };
 
-/* USB PHY */
-static struct resource usb_phy_resources[] = {
-	[0] = {
-		.start		= 0xffe70000,
-		.end		= 0xffe70900 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= 0xfff70000,
-		.end		= 0xfff70900 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device usb_phy_device = {
-	.name		= "rcar_usb_phy",
-	.resource	= usb_phy_resources,
-	.num_resources	= ARRAY_SIZE(usb_phy_resources),
-};
-
 /* LEDS */
 static struct gpio_led marzen_leds[] = {
 	{
@@ -205,161 +181,9 @@ static struct platform_device *marzen_de
 	&sdhi0_device,
 	&thermal_device,
 	&hspi_device,
-	&usb_phy_device,
 	&leds_device,
 };
 
-/* USB */
-static struct usb_phy *phy;
-static int usb_power_on(struct platform_device *pdev)
-{
-	if (!phy)
-		return -EIO;
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
-
-	usb_phy_init(phy);
-
-	return 0;
-}
-
-static void usb_power_off(struct platform_device *pdev)
-{
-	if (!phy)
-		return;
-
-	usb_phy_shutdown(phy);
-
-	pm_runtime_put_sync(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
-}
-
-static struct usb_ehci_pdata ehcix_pdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-};
-
-static struct resource ehci0_resources[] = {
-	[0] = {
-		.start	= 0xffe70000,
-		.end	= 0xffe70400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4c),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ehci0_device = {
-	.name	= "ehci-platform",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ehci0_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ehcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ehci0_resources),
-	.resource	= ehci0_resources,
-};
-
-static struct resource ehci1_resources[] = {
-	[0] = {
-		.start	= 0xfff70000,
-		.end	= 0xfff70400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4d),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ehci1_device = {
-	.name	= "ehci-platform",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ehci1_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ehcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ehci1_resources),
-	.resource	= ehci1_resources,
-};
-
-static struct usb_ohci_pdata ohcix_pdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-};
-
-static struct resource ohci0_resources[] = {
-	[0] = {
-		.start	= 0xffe70400,
-		.end	= 0xffe70800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4c),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci0_device = {
-	.name	= "ohci-platform",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ohci0_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ohcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ohci0_resources),
-	.resource	= ohci0_resources,
-};
-
-static struct resource ohci1_resources[] = {
-	[0] = {
-		.start	= 0xfff70400,
-		.end	= 0xfff70800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4d),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci1_device = {
-	.name	= "ohci-platform",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ohci1_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ohcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ohci1_resources),
-	.resource	= ohci1_resources,
-};
-
-static struct platform_device *marzen_late_devices[] __initdata = {
-	&ehci0_device,
-	&ehci1_device,
-	&ohci0_device,
-	&ohci1_device,
-};
-
-static void __init marzen_init_late(void)
-{
-	/* get usb phy */
-	phy = usb_get_phy(USB_PHY_TYPE_USB2);
-
-	shmobile_init_late();
-	platform_add_devices(marzen_late_devices,
-			     ARRAY_SIZE(marzen_late_devices));
-}
-
 static const struct pinctrl_map marzen_pinctrl_map[] = {
 	/* HSPI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779",
@@ -418,6 +242,6 @@ MACHINE_START(MARZEN, "marzen")
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= r8a7779_init_irq,
 	.init_machine	= marzen_init,
-	.init_late	= marzen_init_late,
+	.init_late	= r8a7779_init_late,
 	.init_time	= r8a7779_earlytimer_init,
 MACHINE_END
Index: renesas/arch/arm/mach-shmobile/include/mach/r8a7779.h
=================================--- renesas.orig/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ renesas/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -33,6 +33,7 @@ extern void r8a7779_add_early_devices(vo
 extern void r8a7779_add_standard_devices(void);
 extern void r8a7779_add_standard_devices_dt(void);
 extern void r8a7779_add_ether_device(struct sh_eth_plat_data *pdata);
+extern void r8a7779_init_late(void);
 extern void r8a7779_clock_init(void);
 extern void r8a7779_pinmux_init(void);
 extern void r8a7779_pm_init(void);
Index: renesas/arch/arm/mach-shmobile/setup-r8a7779.c
=================================--- renesas.orig/arch/arm/mach-shmobile/setup-r8a7779.c
+++ renesas/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -32,6 +32,10 @@
 #include <linux/sh_intc.h>
 #include <linux/sh_timer.h>
 #include <linux/dma-mapping.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <linux/pm_runtime.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/r8a7779.h>
@@ -383,6 +387,162 @@ static struct platform_device sata_devic
 	},
 };
 
+/* USB PHY */
+static struct resource usb_phy_resources[] = {
+	[0] = {
+		.start		= 0xffe70000,
+		.end		= 0xffe70900 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 0xfff70000,
+		.end		= 0xfff70900 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device usb_phy_device = {
+	.name		= "rcar_usb_phy",
+	.id		= -1,
+	.resource	= usb_phy_resources,
+	.num_resources	= ARRAY_SIZE(usb_phy_resources),
+};
+
+/* USB */
+static struct usb_phy *phy;
+
+static int usb_power_on(struct platform_device *pdev)
+{
+	if (!phy)
+		return -EIO;
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	usb_phy_init(phy);
+
+	return 0;
+}
+
+static void usb_power_off(struct platform_device *pdev)
+{
+	if (!phy)
+		return;
+
+	usb_phy_shutdown(phy);
+
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+}
+
+static struct usb_ehci_pdata ehcix_pdata = {
+	.power_on	= usb_power_on,
+	.power_off	= usb_power_off,
+	.power_suspend	= usb_power_off,
+};
+
+static struct resource ehci0_resources[] = {
+	[0] = {
+		.start	= 0xffe70000,
+		.end	= 0xffe70400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_iid(0x4c),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ehci0_device = {
+	.name	= "ehci-platform",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ehci0_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ehcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ehci0_resources),
+	.resource	= ehci0_resources,
+};
+
+static struct resource ehci1_resources[] = {
+	[0] = {
+		.start	= 0xfff70000,
+		.end	= 0xfff70400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_iid(0x4d),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ehci1_device = {
+	.name	= "ehci-platform",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ehci1_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ehcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ehci1_resources),
+	.resource	= ehci1_resources,
+};
+
+static struct usb_ohci_pdata ohcix_pdata = {
+	.power_on	= usb_power_on,
+	.power_off	= usb_power_off,
+	.power_suspend	= usb_power_off,
+};
+
+static struct resource ohci0_resources[] = {
+	[0] = {
+		.start	= 0xffe70400,
+		.end	= 0xffe70800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_iid(0x4c),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci0_device = {
+	.name	= "ohci-platform",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ohci0_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ohcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ohci0_resources),
+	.resource	= ohci0_resources,
+};
+
+static struct resource ohci1_resources[] = {
+	[0] = {
+		.start	= 0xfff70400,
+		.end	= 0xfff70800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_iid(0x4d),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci1_device = {
+	.name	= "ohci-platform",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ohci1_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ohcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ohci1_resources),
+	.resource	= ohci1_resources,
+};
+
 /* Ether */
 static struct resource ether_resources[] = {
 	{
@@ -404,9 +564,10 @@ static struct platform_device *r8a7779_d
 	&scif5_device,
 	&tmu00_device,
 	&tmu01_device,
+	&usb_phy_device,
 };
 
-static struct platform_device *r8a7779_late_devices[] __initdata = {
+static struct platform_device *r8a7779_standard_devices[] __initdata = {
 	&i2c0_device,
 	&i2c1_device,
 	&i2c2_device,
@@ -426,8 +587,8 @@ void __init r8a7779_add_standard_devices
 
 	platform_add_devices(r8a7779_devices_dt,
 			    ARRAY_SIZE(r8a7779_devices_dt));
-	platform_add_devices(r8a7779_late_devices,
-			    ARRAY_SIZE(r8a7779_late_devices));
+	platform_add_devices(r8a7779_standard_devices,
+			    ARRAY_SIZE(r8a7779_standard_devices));
 }
 
 void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata)
@@ -470,6 +631,23 @@ void __init r8a7779_add_early_devices(vo
 	 */
 }
 
+static struct platform_device *r8a7779_late_devices[] __initdata = {
+	&ehci0_device,
+	&ehci1_device,
+	&ohci0_device,
+	&ohci1_device,
+};
+
+void __init r8a7779_init_late(void)
+{
+	/* get USB PHY */
+	phy = usb_get_phy(USB_PHY_TYPE_USB2);
+
+	shmobile_init_late();
+	platform_add_devices(r8a7779_late_devices,
+			     ARRAY_SIZE(r8a7779_late_devices));
+}
+
 #ifdef CONFIG_USE_OF
 void __init r8a7779_init_delay(void)
 {
@@ -503,6 +681,7 @@ DT_MACHINE_START(R8A7779_DT, "Generic R8
 	.init_irq	= r8a7779_init_irq_dt,
 	.init_machine	= r8a7779_add_standard_devices_dt,
 	.init_time	= shmobile_timer_init,
+	.init_late	= r8a7779_init_late,
 	.dt_compat	= r8a7779_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v5 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
@ 2013-04-19 21:56 ` Sergei Shtylyov
  0 siblings, 0 replies; 10+ messages in thread
From: Sergei Shtylyov @ 2013-04-19 21:56 UTC (permalink / raw)
  To: linux-arm-kernel

USB EHCI, OHCI, and common PHY are the SoC devices but are wrongly defined and
registered in the Marzen board file.  Move the data and code to their proper
place in setup-r8a7779.c; while at it, we have to rename 8a7779_late_devices[]
to 8a7779_standard_devices[] -- this seems legitimate since they are registered
from r8a7779_add_standard_devices() anyway.

Note that I'm deliberately changing the USB PHY platform device's 'id' field
from (previously just omitted) 0 to -1 as the device is a single of its kind.

Note also that the board and SoC code have to be in one patch to keep the code
bisectable...

The patch has been tested on the Marzen board.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>

---
Changes since version 4:
- resolved reject in the 'board-marzen.c' file, refreshed the patch.

Changes since version 3:
- refreshed the 'board-marzen.c' file.

Changes since version 2:
- added a note about testing to the changelog;
- added ACKs from Simon Horman and Kuninori Morimoto.

Changes since the original posting:
- added a note about bisectability to the changelog.

 arch/arm/mach-shmobile/board-marzen.c         |  178 -------------------------
 arch/arm/mach-shmobile/include/mach/r8a7779.h |    1 
 arch/arm/mach-shmobile/setup-r8a7779.c        |  185 +++++++++++++++++++++++++-
 3 files changed, 184 insertions(+), 180 deletions(-)

Index: renesas/arch/arm/mach-shmobile/board-marzen.c
===================================================================
--- renesas.orig/arch/arm/mach-shmobile/board-marzen.c
+++ renesas/arch/arm/mach-shmobile/board-marzen.c
@@ -37,10 +37,6 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <linux/pm_runtime.h>
 #include <mach/hardware.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
@@ -150,26 +146,6 @@ static struct platform_device hspi_devic
 	.num_resources	= ARRAY_SIZE(hspi_resources),
 };
 
-/* USB PHY */
-static struct resource usb_phy_resources[] = {
-	[0] = {
-		.start		= 0xffe70000,
-		.end		= 0xffe70900 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= 0xfff70000,
-		.end		= 0xfff70900 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device usb_phy_device = {
-	.name		= "rcar_usb_phy",
-	.resource	= usb_phy_resources,
-	.num_resources	= ARRAY_SIZE(usb_phy_resources),
-};
-
 /* LEDS */
 static struct gpio_led marzen_leds[] = {
 	{
@@ -205,161 +181,9 @@ static struct platform_device *marzen_de
 	&sdhi0_device,
 	&thermal_device,
 	&hspi_device,
-	&usb_phy_device,
 	&leds_device,
 };
 
-/* USB */
-static struct usb_phy *phy;
-static int usb_power_on(struct platform_device *pdev)
-{
-	if (!phy)
-		return -EIO;
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
-
-	usb_phy_init(phy);
-
-	return 0;
-}
-
-static void usb_power_off(struct platform_device *pdev)
-{
-	if (!phy)
-		return;
-
-	usb_phy_shutdown(phy);
-
-	pm_runtime_put_sync(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
-}
-
-static struct usb_ehci_pdata ehcix_pdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-};
-
-static struct resource ehci0_resources[] = {
-	[0] = {
-		.start	= 0xffe70000,
-		.end	= 0xffe70400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4c),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ehci0_device = {
-	.name	= "ehci-platform",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ehci0_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ehcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ehci0_resources),
-	.resource	= ehci0_resources,
-};
-
-static struct resource ehci1_resources[] = {
-	[0] = {
-		.start	= 0xfff70000,
-		.end	= 0xfff70400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4d),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ehci1_device = {
-	.name	= "ehci-platform",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ehci1_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ehcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ehci1_resources),
-	.resource	= ehci1_resources,
-};
-
-static struct usb_ohci_pdata ohcix_pdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-};
-
-static struct resource ohci0_resources[] = {
-	[0] = {
-		.start	= 0xffe70400,
-		.end	= 0xffe70800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4c),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci0_device = {
-	.name	= "ohci-platform",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ohci0_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ohcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ohci0_resources),
-	.resource	= ohci0_resources,
-};
-
-static struct resource ohci1_resources[] = {
-	[0] = {
-		.start	= 0xfff70400,
-		.end	= 0xfff70800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4d),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci1_device = {
-	.name	= "ohci-platform",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ohci1_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ohcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ohci1_resources),
-	.resource	= ohci1_resources,
-};
-
-static struct platform_device *marzen_late_devices[] __initdata = {
-	&ehci0_device,
-	&ehci1_device,
-	&ohci0_device,
-	&ohci1_device,
-};
-
-static void __init marzen_init_late(void)
-{
-	/* get usb phy */
-	phy = usb_get_phy(USB_PHY_TYPE_USB2);
-
-	shmobile_init_late();
-	platform_add_devices(marzen_late_devices,
-			     ARRAY_SIZE(marzen_late_devices));
-}
-
 static const struct pinctrl_map marzen_pinctrl_map[] = {
 	/* HSPI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779",
@@ -418,6 +242,6 @@ MACHINE_START(MARZEN, "marzen")
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= r8a7779_init_irq,
 	.init_machine	= marzen_init,
-	.init_late	= marzen_init_late,
+	.init_late	= r8a7779_init_late,
 	.init_time	= r8a7779_earlytimer_init,
 MACHINE_END
Index: renesas/arch/arm/mach-shmobile/include/mach/r8a7779.h
===================================================================
--- renesas.orig/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ renesas/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -33,6 +33,7 @@ extern void r8a7779_add_early_devices(vo
 extern void r8a7779_add_standard_devices(void);
 extern void r8a7779_add_standard_devices_dt(void);
 extern void r8a7779_add_ether_device(struct sh_eth_plat_data *pdata);
+extern void r8a7779_init_late(void);
 extern void r8a7779_clock_init(void);
 extern void r8a7779_pinmux_init(void);
 extern void r8a7779_pm_init(void);
Index: renesas/arch/arm/mach-shmobile/setup-r8a7779.c
===================================================================
--- renesas.orig/arch/arm/mach-shmobile/setup-r8a7779.c
+++ renesas/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -32,6 +32,10 @@
 #include <linux/sh_intc.h>
 #include <linux/sh_timer.h>
 #include <linux/dma-mapping.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <linux/pm_runtime.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/r8a7779.h>
@@ -383,6 +387,162 @@ static struct platform_device sata_devic
 	},
 };
 
+/* USB PHY */
+static struct resource usb_phy_resources[] = {
+	[0] = {
+		.start		= 0xffe70000,
+		.end		= 0xffe70900 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 0xfff70000,
+		.end		= 0xfff70900 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device usb_phy_device = {
+	.name		= "rcar_usb_phy",
+	.id		= -1,
+	.resource	= usb_phy_resources,
+	.num_resources	= ARRAY_SIZE(usb_phy_resources),
+};
+
+/* USB */
+static struct usb_phy *phy;
+
+static int usb_power_on(struct platform_device *pdev)
+{
+	if (!phy)
+		return -EIO;
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	usb_phy_init(phy);
+
+	return 0;
+}
+
+static void usb_power_off(struct platform_device *pdev)
+{
+	if (!phy)
+		return;
+
+	usb_phy_shutdown(phy);
+
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+}
+
+static struct usb_ehci_pdata ehcix_pdata = {
+	.power_on	= usb_power_on,
+	.power_off	= usb_power_off,
+	.power_suspend	= usb_power_off,
+};
+
+static struct resource ehci0_resources[] = {
+	[0] = {
+		.start	= 0xffe70000,
+		.end	= 0xffe70400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_iid(0x4c),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ehci0_device = {
+	.name	= "ehci-platform",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ehci0_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ehcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ehci0_resources),
+	.resource	= ehci0_resources,
+};
+
+static struct resource ehci1_resources[] = {
+	[0] = {
+		.start	= 0xfff70000,
+		.end	= 0xfff70400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_iid(0x4d),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ehci1_device = {
+	.name	= "ehci-platform",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ehci1_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ehcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ehci1_resources),
+	.resource	= ehci1_resources,
+};
+
+static struct usb_ohci_pdata ohcix_pdata = {
+	.power_on	= usb_power_on,
+	.power_off	= usb_power_off,
+	.power_suspend	= usb_power_off,
+};
+
+static struct resource ohci0_resources[] = {
+	[0] = {
+		.start	= 0xffe70400,
+		.end	= 0xffe70800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_iid(0x4c),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci0_device = {
+	.name	= "ohci-platform",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ohci0_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ohcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ohci0_resources),
+	.resource	= ohci0_resources,
+};
+
+static struct resource ohci1_resources[] = {
+	[0] = {
+		.start	= 0xfff70400,
+		.end	= 0xfff70800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_iid(0x4d),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci1_device = {
+	.name	= "ohci-platform",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ohci1_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ohcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ohci1_resources),
+	.resource	= ohci1_resources,
+};
+
 /* Ether */
 static struct resource ether_resources[] = {
 	{
@@ -404,9 +564,10 @@ static struct platform_device *r8a7779_d
 	&scif5_device,
 	&tmu00_device,
 	&tmu01_device,
+	&usb_phy_device,
 };
 
-static struct platform_device *r8a7779_late_devices[] __initdata = {
+static struct platform_device *r8a7779_standard_devices[] __initdata = {
 	&i2c0_device,
 	&i2c1_device,
 	&i2c2_device,
@@ -426,8 +587,8 @@ void __init r8a7779_add_standard_devices
 
 	platform_add_devices(r8a7779_devices_dt,
 			    ARRAY_SIZE(r8a7779_devices_dt));
-	platform_add_devices(r8a7779_late_devices,
-			    ARRAY_SIZE(r8a7779_late_devices));
+	platform_add_devices(r8a7779_standard_devices,
+			    ARRAY_SIZE(r8a7779_standard_devices));
 }
 
 void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata)
@@ -470,6 +631,23 @@ void __init r8a7779_add_early_devices(vo
 	 */
 }
 
+static struct platform_device *r8a7779_late_devices[] __initdata = {
+	&ehci0_device,
+	&ehci1_device,
+	&ohci0_device,
+	&ohci1_device,
+};
+
+void __init r8a7779_init_late(void)
+{
+	/* get USB PHY */
+	phy = usb_get_phy(USB_PHY_TYPE_USB2);
+
+	shmobile_init_late();
+	platform_add_devices(r8a7779_late_devices,
+			     ARRAY_SIZE(r8a7779_late_devices));
+}
+
 #ifdef CONFIG_USE_OF
 void __init r8a7779_init_delay(void)
 {
@@ -503,6 +681,7 @@ DT_MACHINE_START(R8A7779_DT, "Generic R8
 	.init_irq	= r8a7779_init_irq_dt,
 	.init_machine	= r8a7779_add_standard_devices_dt,
 	.init_time	= shmobile_timer_init,
+	.init_late	= r8a7779_init_late,
 	.dt_compat	= r8a7779_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v5 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
  2013-04-19 21:56 ` Sergei Shtylyov
@ 2013-04-21 19:19   ` Sergei Shtylyov
  -1 siblings, 0 replies; 10+ messages in thread
From: Sergei Shtylyov @ 2013-04-21 19:19 UTC (permalink / raw)
  To: linux-arm-kernel

Hello.

On 04/20/2013 01:56 AM, Sergei Shtylyov wrote:

> USB EHCI, OHCI, and common PHY are the SoC devices but are wrongly defined and
> registered in the Marzen board file.  Move the data and code to their proper
> place in setup-r8a7779.c; while at it, we have to rename 8a7779_late_devices[]
> to 8a7779_standard_devices[] -- this seems legitimate since they are registered

     I've been pointed to the types in the above variable names privately.
Don't know should I resend or Simon could fix s/8a7779/r8a7779/ while
applying... well, the USB patches haven't been ACK'ed yet.

> from r8a7779_add_standard_devices() anyway.
>
> Note that I'm deliberately changing the USB PHY platform device's 'id' field
> from (previously just omitted) 0 to -1 as the device is a single of its kind.
>
> Note also that the board and SoC code have to be in one patch to keep the code
> bisectable...
>
> The patch has been tested on the Marzen board.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> Acked-by: Simon Horman <horms+renesas@verge.net.au>

WBR, Sergei


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v5 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
@ 2013-04-21 19:19   ` Sergei Shtylyov
  0 siblings, 0 replies; 10+ messages in thread
From: Sergei Shtylyov @ 2013-04-21 19:19 UTC (permalink / raw)
  To: linux-arm-kernel

Hello.

On 04/20/2013 01:56 AM, Sergei Shtylyov wrote:

> USB EHCI, OHCI, and common PHY are the SoC devices but are wrongly defined and
> registered in the Marzen board file.  Move the data and code to their proper
> place in setup-r8a7779.c; while at it, we have to rename 8a7779_late_devices[]
> to 8a7779_standard_devices[] -- this seems legitimate since they are registered

     I've been pointed to the types in the above variable names privately.
Don't know should I resend or Simon could fix s/8a7779/r8a7779/ while
applying... well, the USB patches haven't been ACK'ed yet.

> from r8a7779_add_standard_devices() anyway.
>
> Note that I'm deliberately changing the USB PHY platform device's 'id' field
> from (previously just omitted) 0 to -1 as the device is a single of its kind.
>
> Note also that the board and SoC code have to be in one patch to keep the code
> bisectable...
>
> The patch has been tested on the Marzen board.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> Acked-by: Simon Horman <horms+renesas@verge.net.au>

WBR, Sergei

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v5 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
  2013-04-21 19:19   ` Sergei Shtylyov
@ 2013-04-22  1:09     ` Simon Horman
  -1 siblings, 0 replies; 10+ messages in thread
From: Simon Horman @ 2013-04-22  1:09 UTC (permalink / raw)
  To: linux-arm-kernel

On Sun, Apr 21, 2013 at 11:19:28PM +0400, Sergei Shtylyov wrote:
> Hello.
> 
> On 04/20/2013 01:56 AM, Sergei Shtylyov wrote:
> 
> >USB EHCI, OHCI, and common PHY are the SoC devices but are wrongly defined and
> >registered in the Marzen board file.  Move the data and code to their proper
> >place in setup-r8a7779.c; while at it, we have to rename 8a7779_late_devices[]
> >to 8a7779_standard_devices[] -- this seems legitimate since they are registered
> 
>     I've been pointed to the types in the above variable names privately.
> Don't know should I resend or Simon could fix s/8a7779/r8a7779/ while
> applying... well, the USB patches haven't been ACK'ed yet.

I can fix that up.

Is the series waiting on anything?

> 
> >from r8a7779_add_standard_devices() anyway.
> >
> >Note that I'm deliberately changing the USB PHY platform device's 'id' field
> >from (previously just omitted) 0 to -1 as the device is a single of its kind.
> >
> >Note also that the board and SoC code have to be in one patch to keep the code
> >bisectable...
> >
> >The patch has been tested on the Marzen board.
> >
> >Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> >Acked-by: Simon Horman <horms+renesas@verge.net.au>
> 
> WBR, Sergei
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v5 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
@ 2013-04-22  1:09     ` Simon Horman
  0 siblings, 0 replies; 10+ messages in thread
From: Simon Horman @ 2013-04-22  1:09 UTC (permalink / raw)
  To: linux-arm-kernel

On Sun, Apr 21, 2013 at 11:19:28PM +0400, Sergei Shtylyov wrote:
> Hello.
> 
> On 04/20/2013 01:56 AM, Sergei Shtylyov wrote:
> 
> >USB EHCI, OHCI, and common PHY are the SoC devices but are wrongly defined and
> >registered in the Marzen board file.  Move the data and code to their proper
> >place in setup-r8a7779.c; while at it, we have to rename 8a7779_late_devices[]
> >to 8a7779_standard_devices[] -- this seems legitimate since they are registered
> 
>     I've been pointed to the types in the above variable names privately.
> Don't know should I resend or Simon could fix s/8a7779/r8a7779/ while
> applying... well, the USB patches haven't been ACK'ed yet.

I can fix that up.

Is the series waiting on anything?

> 
> >from r8a7779_add_standard_devices() anyway.
> >
> >Note that I'm deliberately changing the USB PHY platform device's 'id' field
> >from (previously just omitted) 0 to -1 as the device is a single of its kind.
> >
> >Note also that the board and SoC code have to be in one patch to keep the code
> >bisectable...
> >
> >The patch has been tested on the Marzen board.
> >
> >Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> >Acked-by: Simon Horman <horms+renesas@verge.net.au>
> 
> WBR, Sergei
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v5 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
  2013-04-22  1:09     ` Simon Horman
@ 2013-04-22 13:34       ` Sergei Shtylyov
  -1 siblings, 0 replies; 10+ messages in thread
From: Sergei Shtylyov @ 2013-04-22 13:34 UTC (permalink / raw)
  To: linux-arm-kernel

Hello.

On 22-04-2013 5:09, Simon Horman wrote:

>>> USB EHCI, OHCI, and common PHY are the SoC devices but are wrongly defined and
>>> registered in the Marzen board file.  Move the data and code to their proper
>>> place in setup-r8a7779.c; while at it, we have to rename 8a7779_late_devices[]
>>> to 8a7779_standard_devices[] -- this seems legitimate since they are registered
>>
>>      I've been pointed to the types in the above variable names privately.
>> Don't know should I resend or Simon could fix s/8a7779/r8a7779/ while
>> applying... well, the USB patches haven't been ACK'ed yet.

> I can fix that up.

> Is the series waiting on anything?

    Probably on Felipe's ACKs on rcar-phy.c patches... Felipe hasn't appeared 
on this list for a week but I see his mails from today.

>> >from r8a7779_add_standard_devices() anyway.

>>> Note that I'm deliberately changing the USB PHY platform device's 'id' field
>> >from (previously just omitted) 0 to -1 as the device is a single of its kind.

>>> Note also that the board and SoC code have to be in one patch to keep the code
>>> bisectable...

>>> The patch has been tested on the Marzen board.

>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>>> Acked-by: Simon Horman <horms+renesas@verge.net.au>

WBR, Sergei


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v5 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
@ 2013-04-22 13:34       ` Sergei Shtylyov
  0 siblings, 0 replies; 10+ messages in thread
From: Sergei Shtylyov @ 2013-04-22 13:34 UTC (permalink / raw)
  To: linux-arm-kernel

Hello.

On 22-04-2013 5:09, Simon Horman wrote:

>>> USB EHCI, OHCI, and common PHY are the SoC devices but are wrongly defined and
>>> registered in the Marzen board file.  Move the data and code to their proper
>>> place in setup-r8a7779.c; while at it, we have to rename 8a7779_late_devices[]
>>> to 8a7779_standard_devices[] -- this seems legitimate since they are registered
>>
>>      I've been pointed to the types in the above variable names privately.
>> Don't know should I resend or Simon could fix s/8a7779/r8a7779/ while
>> applying... well, the USB patches haven't been ACK'ed yet.

> I can fix that up.

> Is the series waiting on anything?

    Probably on Felipe's ACKs on rcar-phy.c patches... Felipe hasn't appeared 
on this list for a week but I see his mails from today.

>> >from r8a7779_add_standard_devices() anyway.

>>> Note that I'm deliberately changing the USB PHY platform device's 'id' field
>> >from (previously just omitted) 0 to -1 as the device is a single of its kind.

>>> Note also that the board and SoC code have to be in one patch to keep the code
>>> bisectable...

>>> The patch has been tested on the Marzen board.

>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>>> Acked-by: Simon Horman <horms+renesas@verge.net.au>

WBR, Sergei

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v5 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
  2013-04-22 13:34       ` Sergei Shtylyov
@ 2013-04-23  1:52         ` Simon Horman
  -1 siblings, 0 replies; 10+ messages in thread
From: Simon Horman @ 2013-04-23  1:52 UTC (permalink / raw)
  To: linux-arm-kernel

On Mon, Apr 22, 2013 at 05:34:05PM +0400, Sergei Shtylyov wrote:
> Hello.
> 
> On 22-04-2013 5:09, Simon Horman wrote:
> 
> >>>USB EHCI, OHCI, and common PHY are the SoC devices but are wrongly defined and
> >>>registered in the Marzen board file.  Move the data and code to their proper
> >>>place in setup-r8a7779.c; while at it, we have to rename 8a7779_late_devices[]
> >>>to 8a7779_standard_devices[] -- this seems legitimate since they are registered
> >>
> >>     I've been pointed to the types in the above variable names privately.
> >>Don't know should I resend or Simon could fix s/8a7779/r8a7779/ while
> >>applying... well, the USB patches haven't been ACK'ed yet.
> 
> >I can fix that up.
> 
> >Is the series waiting on anything?
> 
>    Probably on Felipe's ACKs on rcar-phy.c patches... Felipe hasn't
> appeared on this list for a week but I see his mails from today.

Thanks, lets wait a little longer for his feedback.
Please feel free to ping me if things stagnate.

> >>>from r8a7779_add_standard_devices() anyway.
> 
> >>>Note that I'm deliberately changing the USB PHY platform device's 'id' field
> >>>from (previously just omitted) 0 to -1 as the device is a single of its kind.
> 
> >>>Note also that the board and SoC code have to be in one patch to keep the code
> >>>bisectable...
> 
> >>>The patch has been tested on the Marzen board.
> 
> >>>Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >>>Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> >>>Acked-by: Simon Horman <horms+renesas@verge.net.au>
> 
> WBR, Sergei
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v5 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
@ 2013-04-23  1:52         ` Simon Horman
  0 siblings, 0 replies; 10+ messages in thread
From: Simon Horman @ 2013-04-23  1:52 UTC (permalink / raw)
  To: linux-arm-kernel

On Mon, Apr 22, 2013 at 05:34:05PM +0400, Sergei Shtylyov wrote:
> Hello.
> 
> On 22-04-2013 5:09, Simon Horman wrote:
> 
> >>>USB EHCI, OHCI, and common PHY are the SoC devices but are wrongly defined and
> >>>registered in the Marzen board file.  Move the data and code to their proper
> >>>place in setup-r8a7779.c; while at it, we have to rename 8a7779_late_devices[]
> >>>to 8a7779_standard_devices[] -- this seems legitimate since they are registered
> >>
> >>     I've been pointed to the types in the above variable names privately.
> >>Don't know should I resend or Simon could fix s/8a7779/r8a7779/ while
> >>applying... well, the USB patches haven't been ACK'ed yet.
> 
> >I can fix that up.
> 
> >Is the series waiting on anything?
> 
>    Probably on Felipe's ACKs on rcar-phy.c patches... Felipe hasn't
> appeared on this list for a week but I see his mails from today.

Thanks, lets wait a little longer for his feedback.
Please feel free to ping me if things stagnate.

> >>>from r8a7779_add_standard_devices() anyway.
> 
> >>>Note that I'm deliberately changing the USB PHY platform device's 'id' field
> >>>from (previously just omitted) 0 to -1 as the device is a single of its kind.
> 
> >>>Note also that the board and SoC code have to be in one patch to keep the code
> >>>bisectable...
> 
> >>>The patch has been tested on the Marzen board.
> 
> >>>Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >>>Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> >>>Acked-by: Simon Horman <horms+renesas@verge.net.au>
> 
> WBR, Sergei
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2013-04-23  1:52 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-04-19 21:56 [PATCH v5 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code Sergei Shtylyov
2013-04-19 21:56 ` Sergei Shtylyov
2013-04-21 19:19 ` Sergei Shtylyov
2013-04-21 19:19   ` Sergei Shtylyov
2013-04-22  1:09   ` Simon Horman
2013-04-22  1:09     ` Simon Horman
2013-04-22 13:34     ` Sergei Shtylyov
2013-04-22 13:34       ` Sergei Shtylyov
2013-04-23  1:52       ` Simon Horman
2013-04-23  1:52         ` Simon Horman

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.