[PATCH] ARM: ux500: enable the crypto and hash on all dbx500

[PATCH] ARM: ux500: enable the crypto and hash on all dbx500

[Linus Walleij]

From: Linus Walleij <linus.walleij@linaro.org>

Commits:
"ARM: ux500: Add Device Tree nodes for the ux500 Crypt device"
"ARM: ux500: Add Device Tree nodes for the ux500 Hash device"

Added the crypto and hash devices conditionally, i.e. so as to
be turned on per-board by setting an "status" property on the
device from "disabled" to "okay" on each device.

This is wrong since this is an SoC feature, it is not board
dependent. It is the same ASIC under all circumstances and
functionality does not vary with board family.

This moves the enablement into the SoC file.

Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/dbx5x0.dtsi  | 4 ----
 arch/arm/boot/dts/snowball.dts | 8 --------
 2 files changed, 12 deletions(-)

diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index f051963..cd5cd09 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -760,17 +760,13 @@
 			compatible = "stericsson,ux500-cryp";
 			reg = <0xa03cb000 0x1000>;
 			interrupts = <0 15 0x4>;
-
 			v-ape-supply = <&db8500_vape_reg>;
-			status = "disabled";
 		};
 
 		hash@a03c2000 {
 			compatible = "stericsson,ux500-hash";
 			reg = <0xa03c2000 0x1000>;
-
 			v-ape-supply = <&db8500_vape_reg>;
-			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index bda002f..e8219cc7 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -356,13 +356,5 @@
 				};
 			};
 		};
-
-		cryp@a03cb000 {
-			status = "okay";
-		};
-
-		hash@a03c2000 {
-			status = "okay";
-		};
 	};
 };
-- 
1.7.11.3

[PATCH] ARM: ux500: enable the crypto and hash on all dbx500

[Linus Walleij]

From: Linus Walleij <linus.walleij@linaro.org>

Commits:
"ARM: ux500: Add Device Tree nodes for the ux500 Crypt device"
"ARM: ux500: Add Device Tree nodes for the ux500 Hash device"

Added the crypto and hash devices conditionally, i.e. so as to
be turned on per-board by setting an "status" property on the
device from "disabled" to "okay" on each device.

This is wrong since this is an SoC feature, it is not board
dependent. It is the same ASIC under all circumstances and
functionality does not vary with board family.

This moves the enablement into the SoC file.

Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/dbx5x0.dtsi  | 4 ----
 arch/arm/boot/dts/snowball.dts | 8 --------
 2 files changed, 12 deletions(-)

diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index f051963..cd5cd09 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -760,17 +760,13 @@
 			compatible = "stericsson,ux500-cryp";
 			reg = <0xa03cb000 0x1000>;
 			interrupts = <0 15 0x4>;
-
 			v-ape-supply = <&db8500_vape_reg>;
-			status = "disabled";
 		};
 
 		hash at a03c2000 {
 			compatible = "stericsson,ux500-hash";
 			reg = <0xa03c2000 0x1000>;
-
 			v-ape-supply = <&db8500_vape_reg>;
-			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index bda002f..e8219cc7 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -356,13 +356,5 @@
 				};
 			};
 		};
-
-		cryp at a03cb000 {
-			status = "okay";
-		};
-
-		hash at a03c2000 {
-			status = "okay";
-		};
 	};
 };
-- 
1.7.11.3

Re: [PATCH] ARM: ux500: enable the crypto and hash on all dbx500

[Lee Jones]

On Fri, 24 May 2013, Linus Walleij wrote:

> From: Linus Walleij <linus.walleij@linaro.org>
> 
> Commits:
> "ARM: ux500: Add Device Tree nodes for the ux500 Crypt device"
> "ARM: ux500: Add Device Tree nodes for the ux500 Hash device"
> 
> Added the crypto and hash devices conditionally, i.e. so as to
> be turned on per-board by setting an "status" property on the
> device from "disabled" to "okay" on each device.
> 
> This is wrong since this is an SoC feature, it is not board
> dependent. It is the same ASIC under all circumstances and
> functionality does not vary with board family.
> 
> This moves the enablement into the SoC file.
> 
> Cc: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>  arch/arm/boot/dts/dbx5x0.dtsi  | 4 ----
>  arch/arm/boot/dts/snowball.dts | 8 --------
>  2 files changed, 12 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
> index f051963..cd5cd09 100644
> --- a/arch/arm/boot/dts/dbx5x0.dtsi
> +++ b/arch/arm/boot/dts/dbx5x0.dtsi
> @@ -760,17 +760,13 @@
>  			compatible = "stericsson,ux500-cryp";
>  			reg = <0xa03cb000 0x1000>;
>  			interrupts = <0 15 0x4>;
> -

Why do you insist on removing all line spacings from the DTS file?

I saw you removing them in between nodes too.

>  			v-ape-supply = <&db8500_vape_reg>;
> -			status = "disabled";
>  		};
>  
>  		hash@a03c2000 {
>  			compatible = "stericsson,ux500-hash";
>  			reg = <0xa03c2000 0x1000>;
> -
>  			v-ape-supply = <&db8500_vape_reg>;
> -			status = "disabled";
>  		};
>  	};
>  };
> diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
> index bda002f..e8219cc7 100644
> --- a/arch/arm/boot/dts/snowball.dts
> +++ b/arch/arm/boot/dts/snowball.dts
> @@ -356,13 +356,5 @@
>  				};
>  			};
>  		};
> -
> -		cryp@a03cb000 {
> -			status = "okay";
> -		};
> -
> -		hash@a03c2000 {
> -			status = "okay";
> -		};
>  	};
>  };

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

[PATCH] ARM: ux500: enable the crypto and hash on all dbx500

[Lee Jones]

On Fri, 24 May 2013, Linus Walleij wrote:

> From: Linus Walleij <linus.walleij@linaro.org>
> 
> Commits:
> "ARM: ux500: Add Device Tree nodes for the ux500 Crypt device"
> "ARM: ux500: Add Device Tree nodes for the ux500 Hash device"
> 
> Added the crypto and hash devices conditionally, i.e. so as to
> be turned on per-board by setting an "status" property on the
> device from "disabled" to "okay" on each device.
> 
> This is wrong since this is an SoC feature, it is not board
> dependent. It is the same ASIC under all circumstances and
> functionality does not vary with board family.
> 
> This moves the enablement into the SoC file.
> 
> Cc: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>  arch/arm/boot/dts/dbx5x0.dtsi  | 4 ----
>  arch/arm/boot/dts/snowball.dts | 8 --------
>  2 files changed, 12 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
> index f051963..cd5cd09 100644
> --- a/arch/arm/boot/dts/dbx5x0.dtsi
> +++ b/arch/arm/boot/dts/dbx5x0.dtsi
> @@ -760,17 +760,13 @@
>  			compatible = "stericsson,ux500-cryp";
>  			reg = <0xa03cb000 0x1000>;
>  			interrupts = <0 15 0x4>;
> -

Why do you insist on removing all line spacings from the DTS file?

I saw you removing them in between nodes too.

>  			v-ape-supply = <&db8500_vape_reg>;
> -			status = "disabled";
>  		};
>  
>  		hash at a03c2000 {
>  			compatible = "stericsson,ux500-hash";
>  			reg = <0xa03c2000 0x1000>;
> -
>  			v-ape-supply = <&db8500_vape_reg>;
> -			status = "disabled";
>  		};
>  	};
>  };
> diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
> index bda002f..e8219cc7 100644
> --- a/arch/arm/boot/dts/snowball.dts
> +++ b/arch/arm/boot/dts/snowball.dts
> @@ -356,13 +356,5 @@
>  				};
>  			};
>  		};
> -
> -		cryp at a03cb000 {
> -			status = "okay";
> -		};
> -
> -		hash at a03c2000 {
> -			status = "okay";
> -		};
>  	};
>  };

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH] ARM: ux500: enable the crypto and hash on all dbx500

[Linus Walleij]

On Fri, May 24, 2013 at 10:27 AM, Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> On Fri, 24 May 2013, Linus Walleij wrote:
>> From: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>>
>> Commits:
>> "ARM: ux500: Add Device Tree nodes for the ux500 Crypt device"
>> "ARM: ux500: Add Device Tree nodes for the ux500 Hash device"
>>
>> Added the crypto and hash devices conditionally, i.e. so as to
>> be turned on per-board by setting an "status" property on the
>> device from "disabled" to "okay" on each device.
>>
>> This is wrong since this is an SoC feature, it is not board
>> dependent. It is the same ASIC under all circumstances and
>> functionality does not vary with board family.
>>
>> This moves the enablement into the SoC file.
>>
>> Cc: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>> Signed-off-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>> ---
>>  arch/arm/boot/dts/dbx5x0.dtsi  | 4 ----
>>  arch/arm/boot/dts/snowball.dts | 8 --------
>>  2 files changed, 12 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
>> index f051963..cd5cd09 100644
>> --- a/arch/arm/boot/dts/dbx5x0.dtsi
>> +++ b/arch/arm/boot/dts/dbx5x0.dtsi
>> @@ -760,17 +760,13 @@
>>                       compatible = "stericsson,ux500-cryp";
>>                       reg = <0xa03cb000 0x1000>;
>>                       interrupts = <0 15 0x4>;
>> -
>
> Why do you insist on removing all line spacings from the DTS file?
>
> I saw you removing them in between nodes too.

I was hit by a linespace when I was a child, since then I take
every opportunity for revenge.

If I keep the spacing, can I have your ACK?

Yours,
Linus Walleij

[PATCH] ARM: ux500: enable the crypto and hash on all dbx500

[Linus Walleij]

On Fri, May 24, 2013 at 10:27 AM, Lee Jones <lee.jones@linaro.org> wrote:
> On Fri, 24 May 2013, Linus Walleij wrote:
>> From: Linus Walleij <linus.walleij@linaro.org>
>>
>> Commits:
>> "ARM: ux500: Add Device Tree nodes for the ux500 Crypt device"
>> "ARM: ux500: Add Device Tree nodes for the ux500 Hash device"
>>
>> Added the crypto and hash devices conditionally, i.e. so as to
>> be turned on per-board by setting an "status" property on the
>> device from "disabled" to "okay" on each device.
>>
>> This is wrong since this is an SoC feature, it is not board
>> dependent. It is the same ASIC under all circumstances and
>> functionality does not vary with board family.
>>
>> This moves the enablement into the SoC file.
>>
>> Cc: Lee Jones <lee.jones@linaro.org>
>> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
>> ---
>>  arch/arm/boot/dts/dbx5x0.dtsi  | 4 ----
>>  arch/arm/boot/dts/snowball.dts | 8 --------
>>  2 files changed, 12 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
>> index f051963..cd5cd09 100644
>> --- a/arch/arm/boot/dts/dbx5x0.dtsi
>> +++ b/arch/arm/boot/dts/dbx5x0.dtsi
>> @@ -760,17 +760,13 @@
>>                       compatible = "stericsson,ux500-cryp";
>>                       reg = <0xa03cb000 0x1000>;
>>                       interrupts = <0 15 0x4>;
>> -
>
> Why do you insist on removing all line spacings from the DTS file?
>
> I saw you removing them in between nodes too.

I was hit by a linespace when I was a child, since then I take
every opportunity for revenge.

If I keep the spacing, can I have your ACK?

Yours,
Linus Walleij

Re: [PATCH] ARM: ux500: enable the crypto and hash on all dbx500

[Lee Jones]

On Fri, 24 May 2013, Linus Walleij wrote:

> On Fri, May 24, 2013 at 10:27 AM, Lee Jones <lee.jones@linaro.org> wrote:
> > On Fri, 24 May 2013, Linus Walleij wrote:
> >> From: Linus Walleij <linus.walleij@linaro.org>
> >>
> >> Commits:
> >> "ARM: ux500: Add Device Tree nodes for the ux500 Crypt device"
> >> "ARM: ux500: Add Device Tree nodes for the ux500 Hash device"
> >>
> >> Added the crypto and hash devices conditionally, i.e. so as to
> >> be turned on per-board by setting an "status" property on the
> >> device from "disabled" to "okay" on each device.
> >>
> >> This is wrong since this is an SoC feature, it is not board
> >> dependent. It is the same ASIC under all circumstances and
> >> functionality does not vary with board family.
> >>
> >> This moves the enablement into the SoC file.
> >>
> >> Cc: Lee Jones <lee.jones@linaro.org>
> >> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> >> ---
> >>  arch/arm/boot/dts/dbx5x0.dtsi  | 4 ----
> >>  arch/arm/boot/dts/snowball.dts | 8 --------
> >>  2 files changed, 12 deletions(-)
> >>
> >> diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
> >> index f051963..cd5cd09 100644
> >> --- a/arch/arm/boot/dts/dbx5x0.dtsi
> >> +++ b/arch/arm/boot/dts/dbx5x0.dtsi
> >> @@ -760,17 +760,13 @@
> >>                       compatible = "stericsson,ux500-cryp";
> >>                       reg = <0xa03cb000 0x1000>;
> >>                       interrupts = <0 15 0x4>;
> >> -
> >
> > Why do you insist on removing all line spacings from the DTS file?
> >
> > I saw you removing them in between nodes too.
> 
> I was hit by a linespace when I was a child, since then I take
> every opportunity for revenge.

:)

> If I keep the spacing, can I have your ACK?

You can.

For reference, I like a space separating all nodes too. :)

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

[PATCH] ARM: ux500: enable the crypto and hash on all dbx500

[Lee Jones]

On Fri, 24 May 2013, Linus Walleij wrote:

> On Fri, May 24, 2013 at 10:27 AM, Lee Jones <lee.jones@linaro.org> wrote:
> > On Fri, 24 May 2013, Linus Walleij wrote:
> >> From: Linus Walleij <linus.walleij@linaro.org>
> >>
> >> Commits:
> >> "ARM: ux500: Add Device Tree nodes for the ux500 Crypt device"
> >> "ARM: ux500: Add Device Tree nodes for the ux500 Hash device"
> >>
> >> Added the crypto and hash devices conditionally, i.e. so as to
> >> be turned on per-board by setting an "status" property on the
> >> device from "disabled" to "okay" on each device.
> >>
> >> This is wrong since this is an SoC feature, it is not board
> >> dependent. It is the same ASIC under all circumstances and
> >> functionality does not vary with board family.
> >>
> >> This moves the enablement into the SoC file.
> >>
> >> Cc: Lee Jones <lee.jones@linaro.org>
> >> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> >> ---
> >>  arch/arm/boot/dts/dbx5x0.dtsi  | 4 ----
> >>  arch/arm/boot/dts/snowball.dts | 8 --------
> >>  2 files changed, 12 deletions(-)
> >>
> >> diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
> >> index f051963..cd5cd09 100644
> >> --- a/arch/arm/boot/dts/dbx5x0.dtsi
> >> +++ b/arch/arm/boot/dts/dbx5x0.dtsi
> >> @@ -760,17 +760,13 @@
> >>                       compatible = "stericsson,ux500-cryp";
> >>                       reg = <0xa03cb000 0x1000>;
> >>                       interrupts = <0 15 0x4>;
> >> -
> >
> > Why do you insist on removing all line spacings from the DTS file?
> >
> > I saw you removing them in between nodes too.
> 
> I was hit by a linespace when I was a child, since then I take
> every opportunity for revenge.

:)

> If I keep the spacing, can I have your ACK?

You can.

For reference, I like a space separating all nodes too. :)

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog