[PATCH v4 0/4] Renesas sh-sci updates for v3.11

[PATCH v4 0/4] Renesas sh-sci updates for v3.11

[Simon Horman]

Hi Olof, Hi Arnd,

This revised pull-request includes a build-warning fix by myself.
The build-warning was reported by Arnd and has been acked by Greg
Kroah-Hartman.

I apologise that this is now coming very late in the cycle, this is
mostly due to the time it took to address the build-warning.

I also apologise that I have not yet addressed your request to
drop your addresses from the CC list of the patch emails
that follow this one. I will do so before I start sending patches
for v3.12.


The following changes since commit 018222f5d32bc5ca9fd830aebfeed10f1be96c93:

  ARM: shmobile: r8a7790: add clock definitions and aliases for MMCIF and SDHI (2013-06-12 21:07:38 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-sh-sci-for-v3.11

for you to fetch changes up to d4759ded3bdf3eb004d583011707fdc21aeda94e:

  serial: sh-sci: Initialise variables before access in sci_set_termios() (2013-06-26 17:41:16 +0900)

----------------------------------------------------------------
Renesas sh-sci updates for v3.11

HSCIF support by Ulrich Hecht.

----------------------------------------------------------------
Simon Horman (1):
      serial: sh-sci: Initialise variables before access in sci_set_termios()

Ulrich Hecht (3):
      serial: sh-sci: HSCIF support
      ARM: shmobile: r8a7790: HSCIF support
      ARM: shmobile: r8a7790: don't use external clock for SCIFs

 arch/arm/mach-shmobile/setup-r8a7790.c |  16 ++++-
 drivers/tty/serial/sh-sci.c            | 104 ++++++++++++++++++++++++++++++---
 include/linux/serial_sci.h             |  12 +++-
 include/uapi/linux/serial_core.h       |   3 +
 4 files changed, 121 insertions(+), 14 deletions(-)

[PATCH v4 0/4] Renesas sh-sci updates for v3.11

[Simon Horman]

Hi Olof, Hi Arnd,

This revised pull-request includes a build-warning fix by myself.
The build-warning was reported by Arnd and has been acked by Greg
Kroah-Hartman.

I apologise that this is now coming very late in the cycle, this is
mostly due to the time it took to address the build-warning.

I also apologise that I have not yet addressed your request to
drop your addresses from the CC list of the patch emails
that follow this one. I will do so before I start sending patches
for v3.12.


The following changes since commit 018222f5d32bc5ca9fd830aebfeed10f1be96c93:

  ARM: shmobile: r8a7790: add clock definitions and aliases for MMCIF and SDHI (2013-06-12 21:07:38 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-sh-sci-for-v3.11

for you to fetch changes up to d4759ded3bdf3eb004d583011707fdc21aeda94e:

  serial: sh-sci: Initialise variables before access in sci_set_termios() (2013-06-26 17:41:16 +0900)

----------------------------------------------------------------
Renesas sh-sci updates for v3.11

HSCIF support by Ulrich Hecht.

----------------------------------------------------------------
Simon Horman (1):
      serial: sh-sci: Initialise variables before access in sci_set_termios()

Ulrich Hecht (3):
      serial: sh-sci: HSCIF support
      ARM: shmobile: r8a7790: HSCIF support
      ARM: shmobile: r8a7790: don't use external clock for SCIFs

 arch/arm/mach-shmobile/setup-r8a7790.c |  16 ++++-
 drivers/tty/serial/sh-sci.c            | 104 ++++++++++++++++++++++++++++++---
 include/linux/serial_sci.h             |  12 +++-
 include/uapi/linux/serial_core.h       |   3 +
 4 files changed, 121 insertions(+), 14 deletions(-)

[PATCH 1/4] serial: sh-sci: HSCIF support

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht@gmail.com>

Adds support for "High Speed Serial Communications Interface with FIFO",
essentially a SCIF with 128-byte FIFOs and more accurate baud rate
generator.

Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/tty/serial/sh-sci.c      | 102 ++++++++++++++++++++++++++++++++++++---
 include/linux/serial_sci.h       |  12 +++--
 include/uapi/linux/serial_core.h |   3 ++
 3 files changed, 106 insertions(+), 11 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 1564186..931d6c3 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -146,6 +146,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -165,6 +166,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -183,6 +185,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -201,6 +204,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= { 0x3c, 16 },
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -220,6 +224,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= { 0x20, 16 },
 		[SCLSR]		= { 0x24, 16 },
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -238,6 +243,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -256,6 +262,26 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= { 0x20, 16 },
 		[SCLSR]		= { 0x24, 16 },
+		[HSSRR]		= sci_reg_invalid,
+	},
+
+	/*
+	 * Common HSCIF definitions.
+	 */
+	[SCIx_HSCIF_REGTYPE] = {
+		[SCSMR]		= { 0x00, 16 },
+		[SCBRR]		= { 0x04,  8 },
+		[SCSCR]		= { 0x08, 16 },
+		[SCxTDR]	= { 0x0c,  8 },
+		[SCxSR]		= { 0x10, 16 },
+		[SCxRDR]	= { 0x14,  8 },
+		[SCFCR]		= { 0x18, 16 },
+		[SCFDR]		= { 0x1c, 16 },
+		[SCTFDR]	= sci_reg_invalid,
+		[SCRFDR]	= sci_reg_invalid,
+		[SCSPTR]	= { 0x20, 16 },
+		[SCLSR]		= { 0x24, 16 },
+		[HSSRR]		= { 0x40, 16 },
 	},
 
 	/*
@@ -275,6 +301,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= { 0x24, 16 },
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -294,6 +321,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= { 0x20, 16 },
 		[SCSPTR]	= { 0x24, 16 },
 		[SCLSR]		= { 0x28, 16 },
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -313,6 +341,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 };
 
@@ -374,6 +403,9 @@ static int sci_probe_regmap(struct plat_sci_port *cfg)
 		 */
 		cfg->regtype = SCIx_SH4_SCIF_REGTYPE;
 		break;
+	case PORT_HSCIF:
+		cfg->regtype = SCIx_HSCIF_REGTYPE;
+		break;
 	default:
 		printk(KERN_ERR "Can't probe register map for given port\n");
 		return -EINVAL;
@@ -1798,6 +1830,42 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
 	return ((freq + 16 * bps) / (32 * bps) - 1);
 }
 
+/* calculate sample rate, BRR, and clock select for HSCIF */
+static void sci_baud_calc_hscif(unsigned int bps, unsigned long freq,
+				int *brr, unsigned int *srr,
+				unsigned int *cks)
+{
+	int sr, c, br, err;
+	int min_err = 1000; /* 100% */
+
+	/* Find the combination of sample rate and clock select with the
+	   smallest deviation from the desired baud rate. */
+	for (sr = 8; sr <= 32; sr++) {
+		for (c = 0; c <= 3; c++) {
+			/* integerized formulas from HSCIF documentation */
+			br = freq / (sr * (1 << (2 * c + 1)) * bps) - 1;
+			if (br < 0 || br > 255)
+				continue;
+			err = freq / ((br + 1) * bps * sr *
+			      (1 << (2 * c + 1)) / 1000) - 1000;
+			if (min_err > err) {
+				min_err = err;
+				*brr = br;
+				*srr = sr - 1;
+				*cks = c;
+			}
+		}
+	}
+
+	if (min_err = 1000) {
+		WARN_ON(1);
+		/* use defaults */
+		*brr = 255;
+		*srr = 15;
+		*cks = 0;
+	}
+}
+
 static void sci_reset(struct uart_port *port)
 {
 	struct plat_sci_reg *reg;
@@ -1821,6 +1889,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	struct plat_sci_reg *reg;
 	unsigned int baud, smr_val, max_baud, cks;
 	int t = -1;
+	unsigned int srr;
 
 	/*
 	 * earlyprintk comes here early on with port->uartclk set to zero.
@@ -1833,8 +1902,17 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	max_baud = port->uartclk ? port->uartclk / 16 : 115200;
 
 	baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
-	if (likely(baud && port->uartclk))
-		t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud, port->uartclk);
+	if (likely(baud && port->uartclk)) {
+		if (s->cfg->scbrr_algo_id = SCBRR_ALGO_6) {
+			sci_baud_calc_hscif(baud, port->uartclk, &t, &srr,
+					    &cks);
+		} else {
+			t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud,
+					   port->uartclk);
+			for (cks = 0; t >= 256 && cks <= 3; cks++)
+				t >>= 2;
+		}
+	}
 
 	sci_port_enable(s);
 
@@ -1853,15 +1931,15 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	for (cks = 0; t >= 256 && cks <= 3; cks++)
-		t >>= 2;
-
 	dev_dbg(port->dev, "%s: SMR %x, cks %x, t %x, SCSCR %x\n",
 		__func__, smr_val, cks, t, s->cfg->scscr);
 
 	if (t >= 0) {
 		serial_port_out(port, SCSMR, (smr_val & ~3) | cks);
 		serial_port_out(port, SCBRR, t);
+		reg = sci_getreg(port, HSSRR);
+		if (reg->size)
+			serial_port_out(port, HSSRR, srr | HSCIF_SRE);
 		udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
 	} else
 		serial_port_out(port, SCSMR, smr_val);
@@ -1947,6 +2025,8 @@ static const char *sci_type(struct uart_port *port)
 		return "scifa";
 	case PORT_SCIFB:
 		return "scifb";
+	case PORT_HSCIF:
+		return "hscif";
 	}
 
 	return NULL;
@@ -1960,7 +2040,10 @@ static inline unsigned long sci_port_size(struct uart_port *port)
 	 * from platform resource data at such a time that ports begin to
 	 * behave more erratically.
 	 */
-	return 64;
+	if (port->type = PORT_HSCIF)
+		return 96;
+	else
+		return 64;
 }
 
 static int sci_remap_port(struct uart_port *port)
@@ -2085,6 +2168,9 @@ static int sci_init_single(struct platform_device *dev,
 	case PORT_SCIFB:
 		port->fifosize = 256;
 		break;
+	case PORT_HSCIF:
+		port->fifosize = 128;
+		break;
 	case PORT_SCIFA:
 		port->fifosize = 64;
 		break;
@@ -2325,7 +2411,7 @@ static inline int sci_probe_earlyprintk(struct platform_device *pdev)
 #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
 
 static char banner[] __initdata -	KERN_INFO "SuperH SCI(F) driver initialized\n";
+	KERN_INFO "SuperH (H)SCI(F) driver initialized\n";
 
 static struct uart_driver sci_uart_driver = {
 	.owner		= THIS_MODULE,
@@ -2484,4 +2570,4 @@ module_exit(sci_exit);
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:sh-sci");
 MODULE_AUTHOR("Paul Mundt");
-MODULE_DESCRIPTION("SuperH SCI(F) serial driver");
+MODULE_DESCRIPTION("SuperH (H)SCI(F) serial driver");
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index eb763ad..d340497 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -5,7 +5,7 @@
 #include <linux/sh_dma.h>
 
 /*
- * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts)
+ * Generic header for SuperH (H)SCI(F) (used by sh/sh64/h8300 and related parts)
  */
 
 #define SCIx_NOT_SUPPORTED	(-1)
@@ -16,6 +16,7 @@ enum {
 	SCBRR_ALGO_3,		/* (((clk * 2) + 16 * bps) / (16 * bps) - 1) */
 	SCBRR_ALGO_4,		/* (((clk * 2) + 16 * bps) / (32 * bps) - 1) */
 	SCBRR_ALGO_5,		/* (((clk * 1000 / 32) / bps) - 1) */
+	SCBRR_ALGO_6,		/* HSCIF variable sample rate algorithm */
 };
 
 #define SCSCR_TIE	(1 << 7)
@@ -37,7 +38,7 @@ enum {
 
 #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
 
-/* SCxSR SCIF */
+/* SCxSR SCIF, HSCIF */
 #define SCIF_ER    0x0080
 #define SCIF_TEND  0x0040
 #define SCIF_TDFE  0x0020
@@ -55,6 +56,9 @@ enum {
 #define SCSPTR_SPB2IO	(1 << 1)
 #define SCSPTR_SPB2DT	(1 << 0)
 
+/* HSSRR HSCIF */
+#define HSCIF_SRE	0x8000
+
 /* Offsets into the sci_port->irqs array */
 enum {
 	SCIx_ERI_IRQ,
@@ -90,6 +94,7 @@ enum {
 	SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
 	SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 	SCIx_SH7705_SCIF_REGTYPE,
+	SCIx_HSCIF_REGTYPE,
 
 	SCIx_NR_REGTYPES,
 };
@@ -115,6 +120,7 @@ enum {
 	SCSMR, SCBRR, SCSCR, SCxSR,
 	SCFCR, SCFDR, SCxTDR, SCxRDR,
 	SCLSR, SCTFDR, SCRFDR, SCSPTR,
+	HSSRR,
 
 	SCIx_NR_REGS,
 };
@@ -137,7 +143,7 @@ struct plat_sci_port {
 	unsigned long	mapbase;		/* resource base */
 	unsigned int	irqs[SCIx_NR_IRQS];	/* ERI, RXI, TXI, BRI */
 	unsigned int	gpios[SCIx_NR_FNS];	/* SCK, RXD, TXD, CTS, RTS */
-	unsigned int	type;			/* SCI / SCIF / IRDA */
+	unsigned int	type;			/* SCI / SCIF / IRDA / HSCIF */
 	upf_t		flags;			/* UPF_* flags */
 	unsigned long	capabilities;		/* Port features/capabilities */
 
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 74c2bf7..26eee07 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -226,4 +226,7 @@
 /* Rocketport EXPRESS/INFINITY */
 #define PORT_RP2	102
 
+/* SH-SCI */
+#define PORT_HSCIF	103
+
 #endif /* _UAPILINUX_SERIAL_CORE_H */
-- 
1.8.2.1

[PATCH 1/4] serial: sh-sci: HSCIF support

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht@gmail.com>

Adds support for "High Speed Serial Communications Interface with FIFO",
essentially a SCIF with 128-byte FIFOs and more accurate baud rate
generator.

Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/tty/serial/sh-sci.c      | 102 ++++++++++++++++++++++++++++++++++++---
 include/linux/serial_sci.h       |  12 +++--
 include/uapi/linux/serial_core.h |   3 ++
 3 files changed, 106 insertions(+), 11 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 1564186..931d6c3 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -146,6 +146,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -165,6 +166,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -183,6 +185,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -201,6 +204,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= { 0x3c, 16 },
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -220,6 +224,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= { 0x20, 16 },
 		[SCLSR]		= { 0x24, 16 },
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -238,6 +243,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -256,6 +262,26 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= { 0x20, 16 },
 		[SCLSR]		= { 0x24, 16 },
+		[HSSRR]		= sci_reg_invalid,
+	},
+
+	/*
+	 * Common HSCIF definitions.
+	 */
+	[SCIx_HSCIF_REGTYPE] = {
+		[SCSMR]		= { 0x00, 16 },
+		[SCBRR]		= { 0x04,  8 },
+		[SCSCR]		= { 0x08, 16 },
+		[SCxTDR]	= { 0x0c,  8 },
+		[SCxSR]		= { 0x10, 16 },
+		[SCxRDR]	= { 0x14,  8 },
+		[SCFCR]		= { 0x18, 16 },
+		[SCFDR]		= { 0x1c, 16 },
+		[SCTFDR]	= sci_reg_invalid,
+		[SCRFDR]	= sci_reg_invalid,
+		[SCSPTR]	= { 0x20, 16 },
+		[SCLSR]		= { 0x24, 16 },
+		[HSSRR]		= { 0x40, 16 },
 	},
 
 	/*
@@ -275,6 +301,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= { 0x24, 16 },
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -294,6 +321,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= { 0x20, 16 },
 		[SCSPTR]	= { 0x24, 16 },
 		[SCLSR]		= { 0x28, 16 },
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -313,6 +341,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 };
 
@@ -374,6 +403,9 @@ static int sci_probe_regmap(struct plat_sci_port *cfg)
 		 */
 		cfg->regtype = SCIx_SH4_SCIF_REGTYPE;
 		break;
+	case PORT_HSCIF:
+		cfg->regtype = SCIx_HSCIF_REGTYPE;
+		break;
 	default:
 		printk(KERN_ERR "Can't probe register map for given port\n");
 		return -EINVAL;
@@ -1798,6 +1830,42 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
 	return ((freq + 16 * bps) / (32 * bps) - 1);
 }
 
+/* calculate sample rate, BRR, and clock select for HSCIF */
+static void sci_baud_calc_hscif(unsigned int bps, unsigned long freq,
+				int *brr, unsigned int *srr,
+				unsigned int *cks)
+{
+	int sr, c, br, err;
+	int min_err = 1000; /* 100% */
+
+	/* Find the combination of sample rate and clock select with the
+	   smallest deviation from the desired baud rate. */
+	for (sr = 8; sr <= 32; sr++) {
+		for (c = 0; c <= 3; c++) {
+			/* integerized formulas from HSCIF documentation */
+			br = freq / (sr * (1 << (2 * c + 1)) * bps) - 1;
+			if (br < 0 || br > 255)
+				continue;
+			err = freq / ((br + 1) * bps * sr *
+			      (1 << (2 * c + 1)) / 1000) - 1000;
+			if (min_err > err) {
+				min_err = err;
+				*brr = br;
+				*srr = sr - 1;
+				*cks = c;
+			}
+		}
+	}
+
+	if (min_err == 1000) {
+		WARN_ON(1);
+		/* use defaults */
+		*brr = 255;
+		*srr = 15;
+		*cks = 0;
+	}
+}
+
 static void sci_reset(struct uart_port *port)
 {
 	struct plat_sci_reg *reg;
@@ -1821,6 +1889,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	struct plat_sci_reg *reg;
 	unsigned int baud, smr_val, max_baud, cks;
 	int t = -1;
+	unsigned int srr;
 
 	/*
 	 * earlyprintk comes here early on with port->uartclk set to zero.
@@ -1833,8 +1902,17 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	max_baud = port->uartclk ? port->uartclk / 16 : 115200;
 
 	baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
-	if (likely(baud && port->uartclk))
-		t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud, port->uartclk);
+	if (likely(baud && port->uartclk)) {
+		if (s->cfg->scbrr_algo_id == SCBRR_ALGO_6) {
+			sci_baud_calc_hscif(baud, port->uartclk, &t, &srr,
+					    &cks);
+		} else {
+			t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud,
+					   port->uartclk);
+			for (cks = 0; t >= 256 && cks <= 3; cks++)
+				t >>= 2;
+		}
+	}
 
 	sci_port_enable(s);
 
@@ -1853,15 +1931,15 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	for (cks = 0; t >= 256 && cks <= 3; cks++)
-		t >>= 2;
-
 	dev_dbg(port->dev, "%s: SMR %x, cks %x, t %x, SCSCR %x\n",
 		__func__, smr_val, cks, t, s->cfg->scscr);
 
 	if (t >= 0) {
 		serial_port_out(port, SCSMR, (smr_val & ~3) | cks);
 		serial_port_out(port, SCBRR, t);
+		reg = sci_getreg(port, HSSRR);
+		if (reg->size)
+			serial_port_out(port, HSSRR, srr | HSCIF_SRE);
 		udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
 	} else
 		serial_port_out(port, SCSMR, smr_val);
@@ -1947,6 +2025,8 @@ static const char *sci_type(struct uart_port *port)
 		return "scifa";
 	case PORT_SCIFB:
 		return "scifb";
+	case PORT_HSCIF:
+		return "hscif";
 	}
 
 	return NULL;
@@ -1960,7 +2040,10 @@ static inline unsigned long sci_port_size(struct uart_port *port)
 	 * from platform resource data at such a time that ports begin to
 	 * behave more erratically.
 	 */
-	return 64;
+	if (port->type == PORT_HSCIF)
+		return 96;
+	else
+		return 64;
 }
 
 static int sci_remap_port(struct uart_port *port)
@@ -2085,6 +2168,9 @@ static int sci_init_single(struct platform_device *dev,
 	case PORT_SCIFB:
 		port->fifosize = 256;
 		break;
+	case PORT_HSCIF:
+		port->fifosize = 128;
+		break;
 	case PORT_SCIFA:
 		port->fifosize = 64;
 		break;
@@ -2325,7 +2411,7 @@ static inline int sci_probe_earlyprintk(struct platform_device *pdev)
 #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
 
 static char banner[] __initdata =
-	KERN_INFO "SuperH SCI(F) driver initialized\n";
+	KERN_INFO "SuperH (H)SCI(F) driver initialized\n";
 
 static struct uart_driver sci_uart_driver = {
 	.owner		= THIS_MODULE,
@@ -2484,4 +2570,4 @@ module_exit(sci_exit);
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:sh-sci");
 MODULE_AUTHOR("Paul Mundt");
-MODULE_DESCRIPTION("SuperH SCI(F) serial driver");
+MODULE_DESCRIPTION("SuperH (H)SCI(F) serial driver");
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index eb763ad..d340497 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -5,7 +5,7 @@
 #include <linux/sh_dma.h>
 
 /*
- * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts)
+ * Generic header for SuperH (H)SCI(F) (used by sh/sh64/h8300 and related parts)
  */
 
 #define SCIx_NOT_SUPPORTED	(-1)
@@ -16,6 +16,7 @@ enum {
 	SCBRR_ALGO_3,		/* (((clk * 2) + 16 * bps) / (16 * bps) - 1) */
 	SCBRR_ALGO_4,		/* (((clk * 2) + 16 * bps) / (32 * bps) - 1) */
 	SCBRR_ALGO_5,		/* (((clk * 1000 / 32) / bps) - 1) */
+	SCBRR_ALGO_6,		/* HSCIF variable sample rate algorithm */
 };
 
 #define SCSCR_TIE	(1 << 7)
@@ -37,7 +38,7 @@ enum {
 
 #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
 
-/* SCxSR SCIF */
+/* SCxSR SCIF, HSCIF */
 #define SCIF_ER    0x0080
 #define SCIF_TEND  0x0040
 #define SCIF_TDFE  0x0020
@@ -55,6 +56,9 @@ enum {
 #define SCSPTR_SPB2IO	(1 << 1)
 #define SCSPTR_SPB2DT	(1 << 0)
 
+/* HSSRR HSCIF */
+#define HSCIF_SRE	0x8000
+
 /* Offsets into the sci_port->irqs array */
 enum {
 	SCIx_ERI_IRQ,
@@ -90,6 +94,7 @@ enum {
 	SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
 	SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 	SCIx_SH7705_SCIF_REGTYPE,
+	SCIx_HSCIF_REGTYPE,
 
 	SCIx_NR_REGTYPES,
 };
@@ -115,6 +120,7 @@ enum {
 	SCSMR, SCBRR, SCSCR, SCxSR,
 	SCFCR, SCFDR, SCxTDR, SCxRDR,
 	SCLSR, SCTFDR, SCRFDR, SCSPTR,
+	HSSRR,
 
 	SCIx_NR_REGS,
 };
@@ -137,7 +143,7 @@ struct plat_sci_port {
 	unsigned long	mapbase;		/* resource base */
 	unsigned int	irqs[SCIx_NR_IRQS];	/* ERI, RXI, TXI, BRI */
 	unsigned int	gpios[SCIx_NR_FNS];	/* SCK, RXD, TXD, CTS, RTS */
-	unsigned int	type;			/* SCI / SCIF / IRDA */
+	unsigned int	type;			/* SCI / SCIF / IRDA / HSCIF */
 	upf_t		flags;			/* UPF_* flags */
 	unsigned long	capabilities;		/* Port features/capabilities */
 
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 74c2bf7..26eee07 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -226,4 +226,7 @@
 /* Rocketport EXPRESS/INFINITY */
 #define PORT_RP2	102
 
+/* SH-SCI */
+#define PORT_HSCIF	103
+
 #endif /* _UAPILINUX_SERIAL_CORE_H */
-- 
1.8.2.1

[PATCH 2/4] ARM: shmobile: r8a7790: HSCIF support

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht@gmail.com>

Adds support for HSCIF0 and HSCIF1 on the r8a7790.

Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
[ horms+renesas@verge.net.au this is the setup-r8a7790.c
  which I somehow miss-applied as part of another patch.
  The clock-r8a7790.c portion of this patch has already been merged. ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7790.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 49de2d5..896d374 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -67,7 +67,15 @@ void __init r8a7790_pinmux_init(void)
 	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
 }
 
-enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1 };
+#define HSCIF_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_HSCIF, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_6,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
+       HSCIF0, HSCIF1 };
 
 static const struct plat_sci_port scif[] = {
 	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
@@ -78,6 +86,8 @@ static const struct plat_sci_port scif[] = {
 	SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
 	SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
 	SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
+	HSCIF_DATA(HSCIF0, 0xe62c0000, gic_spi(154)), /* HSCIF0 */
+	HSCIF_DATA(HSCIF1, 0xe62c8000, gic_spi(155)), /* HSCIF1 */
 };
 
 static inline void r8a7790_register_scif(int idx)
@@ -115,6 +125,8 @@ void __init r8a7790_add_standard_devices(void)
 	r8a7790_register_scif(SCIFA2);
 	r8a7790_register_scif(SCIF0);
 	r8a7790_register_scif(SCIF1);
+	r8a7790_register_scif(HSCIF0);
+	r8a7790_register_scif(HSCIF1);
 	r8a7790_register_irqc(0);
 }
 
-- 
1.8.2.1

[PATCH 2/4] ARM: shmobile: r8a7790: HSCIF support

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht@gmail.com>

Adds support for HSCIF0 and HSCIF1 on the r8a7790.

Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
[ horms+renesas at verge.net.au this is the setup-r8a7790.c
  which I somehow miss-applied as part of another patch.
  The clock-r8a7790.c portion of this patch has already been merged. ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7790.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 49de2d5..896d374 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -67,7 +67,15 @@ void __init r8a7790_pinmux_init(void)
 	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
 }
 
-enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1 };
+#define HSCIF_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_HSCIF, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_6,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
+       HSCIF0, HSCIF1 };
 
 static const struct plat_sci_port scif[] = {
 	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
@@ -78,6 +86,8 @@ static const struct plat_sci_port scif[] = {
 	SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
 	SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
 	SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
+	HSCIF_DATA(HSCIF0, 0xe62c0000, gic_spi(154)), /* HSCIF0 */
+	HSCIF_DATA(HSCIF1, 0xe62c8000, gic_spi(155)), /* HSCIF1 */
 };
 
 static inline void r8a7790_register_scif(int idx)
@@ -115,6 +125,8 @@ void __init r8a7790_add_standard_devices(void)
 	r8a7790_register_scif(SCIFA2);
 	r8a7790_register_scif(SCIF0);
 	r8a7790_register_scif(SCIF1);
+	r8a7790_register_scif(HSCIF0);
+	r8a7790_register_scif(HSCIF1);
 	r8a7790_register_irqc(0);
 }
 
-- 
1.8.2.1

[PATCH 3/4] ARM: shmobile: r8a7790: don't use external clock for SCIFs

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht@gmail.com>

This is an external component and may or may not be there, while the
internal clock always works.

Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7790.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 896d374..6531f3d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -64,7 +64,7 @@ void __init r8a7790_pinmux_init(void)
 [index] = {						\
 	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
 	.scbrr_algo_id	= SCBRR_ALGO_2,			\
-	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
 }
 
 #define HSCIF_DATA(index, baseaddr, irq)		\
-- 
1.8.2.1

[PATCH 3/4] ARM: shmobile: r8a7790: don't use external clock for SCIFs

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht@gmail.com>

This is an external component and may or may not be there, while the
internal clock always works.

Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7790.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 896d374..6531f3d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -64,7 +64,7 @@ void __init r8a7790_pinmux_init(void)
 [index] = {						\
 	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
 	.scbrr_algo_id	= SCBRR_ALGO_2,			\
-	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
 }
 
 #define HSCIF_DATA(index, baseaddr, irq)		\
-- 
1.8.2.1

[PATCH 4/4] serial: sh-sci: Initialise variables before access in sci_set_termios()

[Simon Horman]

This change addresses two warnings that are flagged by gcc relating to
potential access to the ssr and cks variables while they are uninitialised.

I have addressed this by initialising the values to
the defaults present in sci_baud_calc_hscif().

It is my analysis that cks is always initialised if used
but that without this change ssr may be accessed while uninitialised.

The code altered by this patch was introduced by commit
f303b364b41d3fc5bf879799128958400b7859aa ("serial: sh-sci: HSCIF support").

Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/tty/serial/sh-sci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 931d6c3..7477e0e 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1887,9 +1887,9 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 {
 	struct sci_port *s = to_sci_port(port);
 	struct plat_sci_reg *reg;
-	unsigned int baud, smr_val, max_baud, cks;
+	unsigned int baud, smr_val, max_baud, cks = 0;
 	int t = -1;
-	unsigned int srr;
+	unsigned int srr = 15;
 
 	/*
 	 * earlyprintk comes here early on with port->uartclk set to zero.
-- 
1.8.2.1

[PATCH 4/4] serial: sh-sci: Initialise variables before access in sci_set_termios()

[Simon Horman]

This change addresses two warnings that are flagged by gcc relating to
potential access to the ssr and cks variables while they are uninitialised.

I have addressed this by initialising the values to
the defaults present in sci_baud_calc_hscif().

It is my analysis that cks is always initialised if used
but that without this change ssr may be accessed while uninitialised.

The code altered by this patch was introduced by commit
f303b364b41d3fc5bf879799128958400b7859aa ("serial: sh-sci: HSCIF support").

Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/tty/serial/sh-sci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 931d6c3..7477e0e 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1887,9 +1887,9 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 {
 	struct sci_port *s = to_sci_port(port);
 	struct plat_sci_reg *reg;
-	unsigned int baud, smr_val, max_baud, cks;
+	unsigned int baud, smr_val, max_baud, cks = 0;
 	int t = -1;
-	unsigned int srr;
+	unsigned int srr = 15;
 
 	/*
 	 * earlyprintk comes here early on with port->uartclk set to zero.
-- 
1.8.2.1

Re: [PATCH 3/4] ARM: shmobile: r8a7790: don't use external clock for SCIFs

[Sergei Shtylyov]

Hello.

On 26-06-2013 12:53, Simon Horman wrote:

> From: Ulrich Hecht <ulrich.hecht@gmail.com>

> This is an external component and may or may not be there, while the
> internal clock always works.

> Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
>   arch/arm/mach-shmobile/setup-r8a7790.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)

> diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
> index 896d374..6531f3d 100644
> --- a/arch/arm/mach-shmobile/setup-r8a7790.c
> +++ b/arch/arm/mach-shmobile/setup-r8a7790.c
> @@ -64,7 +64,7 @@ void __init r8a7790_pinmux_init(void)
>   [index] = {						\
>   	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
>   	.scbrr_algo_id	= SCBRR_ALGO_2,			\
> -	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
> +	.scscr = SCSCR_RE | SCSCR_TE,	\

    Backslash should have been aligned with the others above...

WBR, Sergei

[PATCH 3/4] ARM: shmobile: r8a7790: don't use external clock for SCIFs

[Sergei Shtylyov]

Hello.

On 26-06-2013 12:53, Simon Horman wrote:

> From: Ulrich Hecht <ulrich.hecht@gmail.com>

> This is an external component and may or may not be there, while the
> internal clock always works.

> Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
>   arch/arm/mach-shmobile/setup-r8a7790.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)

> diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
> index 896d374..6531f3d 100644
> --- a/arch/arm/mach-shmobile/setup-r8a7790.c
> +++ b/arch/arm/mach-shmobile/setup-r8a7790.c
> @@ -64,7 +64,7 @@ void __init r8a7790_pinmux_init(void)
>   [index] = {						\
>   	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
>   	.scbrr_algo_id	= SCBRR_ALGO_2,			\
> -	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
> +	.scscr = SCSCR_RE | SCSCR_TE,	\

    Backslash should have been aligned with the others above...

WBR, Sergei

Re: [PATCH v4 0/4] Renesas sh-sci updates for v3.11

[Arnd Bergmann]

On Wednesday 26 June 2013, Simon Horman wrote:
> This revised pull-request includes a build-warning fix by myself.
> The build-warning was reported by Arnd and has been acked by Greg
> Kroah-Hartman.
> 
> I apologise that this is now coming very late in the cycle, this is
> mostly due to the time it took to address the build-warning.

Ok. I've also had a simple merge conflict here, better make sure
it's ok now.

Pulled into next/late.

> I also apologise that I have not yet addressed your request to
> drop your addresses from the CC list of the patch emails
> that follow this one. I will do so before I start sending patches
> for v3.12.

No worries.

	Arnd

[PATCH v4 0/4] Renesas sh-sci updates for v3.11

[Arnd Bergmann]

On Wednesday 26 June 2013, Simon Horman wrote:
> This revised pull-request includes a build-warning fix by myself.
> The build-warning was reported by Arnd and has been acked by Greg
> Kroah-Hartman.
> 
> I apologise that this is now coming very late in the cycle, this is
> mostly due to the time it took to address the build-warning.

Ok. I've also had a simple merge conflict here, better make sure
it's ok now.

Pulled into next/late.

> I also apologise that I have not yet addressed your request to
> drop your addresses from the CC list of the patch emails
> that follow this one. I will do so before I start sending patches
> for v3.12.

No worries.

	Arnd

Re: [PATCH v4 0/4] Renesas sh-sci updates for v3.11

[Simon Horman]

On Thu, Jun 27, 2013 at 03:01:18PM +0200, Arnd Bergmann wrote:
> On Wednesday 26 June 2013, Simon Horman wrote:
> > This revised pull-request includes a build-warning fix by myself.
> > The build-warning was reported by Arnd and has been acked by Greg
> > Kroah-Hartman.
> > 
> > I apologise that this is now coming very late in the cycle, this is
> > mostly due to the time it took to address the build-warning.
> 
> Ok. I've also had a simple merge conflict here, better make sure
> it's ok now.

Thanks. Your resolution appears to be the same as mine.

> Pulled into next/late.
> 
> > I also apologise that I have not yet addressed your request to
> > drop your addresses from the CC list of the patch emails
> > that follow this one. I will do so before I start sending patches
> > for v3.12.
> 
> No worries.
> 
> 	Arnd
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

[PATCH v4 0/4] Renesas sh-sci updates for v3.11

[Simon Horman]

On Thu, Jun 27, 2013 at 03:01:18PM +0200, Arnd Bergmann wrote:
> On Wednesday 26 June 2013, Simon Horman wrote:
> > This revised pull-request includes a build-warning fix by myself.
> > The build-warning was reported by Arnd and has been acked by Greg
> > Kroah-Hartman.
> > 
> > I apologise that this is now coming very late in the cycle, this is
> > mostly due to the time it took to address the build-warning.
> 
> Ok. I've also had a simple merge conflict here, better make sure
> it's ok now.

Thanks. Your resolution appears to be the same as mine.

> Pulled into next/late.
> 
> > I also apologise that I have not yet addressed your request to
> > drop your addresses from the CC list of the patch emails
> > that follow this one. I will do so before I start sending patches
> > for v3.12.
> 
> No worries.
> 
> 	Arnd
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>