[PATCH] powerpc/mpc512x: update defconfig

[PATCH] powerpc/mpc512x: update defconfig

[Anatolij Gustschin]

From: Gerhard Sittig <gsi@denx.de>

This patch does not change the content, it merely re-orders
configuration items and drops explicit options which already
apply as the default.

Signed-off-by: Gerhard Sittig <gsi@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 arch/powerpc/configs/mpc512x_defconfig |   20 +++-----------------
 1 file changed, 3 insertions(+), 17 deletions(-)

diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig
index 0d0d981..5b8ee80 100644
--- a/arch/powerpc/configs/mpc512x_defconfig
+++ b/arch/powerpc/configs/mpc512x_defconfig
@@ -1,7 +1,6 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SPARSE_IRQ=y
+CONFIG_NO_HZ=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_COMPAT_BRK is not set
@@ -9,6 +8,7 @@ CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 # CONFIG_IOSCHED_CFQ is not set
 # CONFIG_PPC_CHRP is not set
 CONFIG_PPC_MPC512x=y
@@ -16,9 +16,7 @@ CONFIG_MPC5121_ADS=y
 CONFIG_MPC512x_GENERIC=y
 CONFIG_PDM360NG=y
 # CONFIG_PPC_PMAC is not set
-CONFIG_NO_HZ=y
 CONFIG_HZ_1000=y
-# CONFIG_MIGRATION is not set
 # CONFIG_SECCOMP is not set
 # CONFIG_PCI is not set
 CONFIG_NET=y
@@ -33,8 +31,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_CAN=y
-CONFIG_CAN_RAW=y
-CONFIG_CAN_BCM=y
 CONFIG_CAN_VCAN=y
 CONFIG_CAN_MSCAN=y
 CONFIG_CAN_DEBUG_DEVICES=y
@@ -46,7 +42,6 @@ CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -60,7 +55,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_XIP=y
-CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 CONFIG_SCSI=y
@@ -68,6 +62,7 @@ CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_NETDEVICES=y
+CONFIG_FS_ENET=y
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_QSEMI_PHY=y
@@ -83,10 +78,6 @@ CONFIG_STE10XP=y
 CONFIG_LSI_ET1011C_PHY=y
 CONFIG_FIXED_PHY=y
 CONFIG_MDIO_BITBANG=y
-CONFIG_NET_ETHERNET=y
-CONFIG_FS_ENET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
@@ -106,10 +97,7 @@ CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_MPC8XXX=y
 # CONFIG_HWMON is not set
 CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
 CONFIG_VIDEO_ADV_DEBUG=y
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_SAA711X=y
 CONFIG_FB=y
 CONFIG_FB_FSL_DIU=y
 # CONFIG_VGA_CONSOLE is not set
@@ -129,9 +117,7 @@ CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
-- 
1.7.9.5

Re: [PATCH] powerpc/mpc512x: update defconfig

[Gerhard Sittig]

On Tue, Jun 25, 2013 at 08:37 +0200, Anatolij Gustschin wrote:
> 
> From: Gerhard Sittig <gsi@denx.de>
> 
> This patch does not change the content, it merely re-orders
> configuration items and drops explicit options which already
> apply as the default.
> 
> Signed-off-by: Gerhard Sittig <gsi@denx.de>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>

In hindsight, I'd prefer to reword the subject to something more
specific, unless it's too late for this now.  I suggest:

  [PATCH] powerpc/mpc512x: commit re-generated defconfig

But if the patch is already queued somewhere, or is acceptable
with the more generic subject, that's fine with me as well.


virtually yours
Gerhard Sittig
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr. 5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office@denx.de

Re: [PATCH] powerpc/mpc512x: update defconfig

[Anatolij Gustschin]

On Sun, 30 Jun 2013 18:23:00 +0200
Gerhard Sittig <gsi@denx.de> wrote:
...
> In hindsight, I'd prefer to reword the subject to something more
> specific, unless it's too late for this now.  I suggest:
> 
>   [PATCH] powerpc/mpc512x: commit re-generated defconfig
> 
> But if the patch is already queued somewhere, or is acceptable
> with the more generic subject, that's fine with me as well.

I've changed the subject as suggested when commiting the patch.

Thanks,

Anatolij