[PATCH linux-next] arm: multi_v7_defconfig: add fsl lpuart serial console

[PATCH linux-next] arm: multi_v7_defconfig: add fsl lpuart serial console

[Vincent Stehlé]

Add Freescale LPUART serial console support. This gives us the boot messages on
UART on e.g. the Vybrid VF610 Tower board.

Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Russell King <linux@arm.linux.org.uk>
---


Hi,

Would you please consider adding LPUART for ARM multi_v7_defconfig, please?

(This patch is built on top of the following patches:
http://comments.gmane.org/gmane.linux.kernel/1519712)

Best regards,

V.


 arch/arm/configs/multi_v7_defconfig |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 81eac83..80aacc6 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -79,6 +79,8 @@ CONFIG_SERIAL_XILINX_PS_UART=y
 CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_SIRF=y
 CONFIG_I2C_TEGRA=y
-- 
1.7.10.4

[PATCH linux-next] arm: multi_v7_defconfig: add fsl lpuart serial console

[Vincent Stehlé]

Add Freescale LPUART serial console support. This gives us the boot messages on
UART on e.g. the Vybrid VF610 Tower board.

Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Russell King <linux@arm.linux.org.uk>
---


Hi,

Would you please consider adding LPUART for ARM multi_v7_defconfig, please?

(This patch is built on top of the following patches:
http://comments.gmane.org/gmane.linux.kernel/1519712)

Best regards,

V.


 arch/arm/configs/multi_v7_defconfig |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 81eac83..80aacc6 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -79,6 +79,8 @@ CONFIG_SERIAL_XILINX_PS_UART=y
 CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_SIRF=y
 CONFIG_I2C_TEGRA=y
-- 
1.7.10.4

Re: [PATCH linux-next] arm: multi_v7_defconfig: add fsl lpuart serial console

[Olof Johansson]

On Tue, Jul 09, 2013 at 07:54:51PM +0200, Vincent Stehlé wrote:
> Add Freescale LPUART serial console support. This gives us the boot messages on
> UART on e.g. the Vybrid VF610 Tower board.
> 
> Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
> Cc: Olof Johansson <olof@lixom.net>
> Cc: Russell King <linux@arm.linux.org.uk>
> ---
> 
> 
> Hi,
> 
> Would you please consider adding LPUART for ARM multi_v7_defconfig, please?
> 
> (This patch is built on top of the following patches:
> http://comments.gmane.org/gmane.linux.kernel/1519712)
> 
> Best regards,

Thanks, applied to fixes. Note that I squashed together the three patches to
one though.


-Olof

[PATCH linux-next] arm: multi_v7_defconfig: add fsl lpuart serial console

[Olof Johansson]

On Tue, Jul 09, 2013 at 07:54:51PM +0200, Vincent Stehl? wrote:
> Add Freescale LPUART serial console support. This gives us the boot messages on
> UART on e.g. the Vybrid VF610 Tower board.
> 
> Signed-off-by: Vincent Stehl? <vincent.stehle@freescale.com>
> Cc: Olof Johansson <olof@lixom.net>
> Cc: Russell King <linux@arm.linux.org.uk>
> ---
> 
> 
> Hi,
> 
> Would you please consider adding LPUART for ARM multi_v7_defconfig, please?
> 
> (This patch is built on top of the following patches:
> http://comments.gmane.org/gmane.linux.kernel/1519712)
> 
> Best regards,

Thanks, applied to fixes. Note that I squashed together the three patches to
one though.


-Olof