* [lm-sensors] [PATCH] [v2] support ads1115 to ads1015 driver
@ 2013-08-01 19:23 Evgeniy Dushistov
2013-08-01 23:22 ` Guenter Roeck
0 siblings, 1 reply; 2+ messages in thread
From: Evgeniy Dushistov @ 2013-08-01 19:23 UTC (permalink / raw)
To: lm-sensors
Ok, version 2 of the patch.
Fixed Guenter Roeck's remarks.
This patch adds support for ads1115 device to ads1015 driver.
Based on work of Emiliano Carnati <carnatiatebneuro.com>.
Tested on ARM CPU based board.
Signed-off-by: Evgeniy A. Dushistov <dushistov@mail.ru>
---
Documentation/hwmon/ads1015 | 8 ++++++--
drivers/hwmon/Kconfig | 4 ++--
drivers/hwmon/ads1015.c | 27 +++++++++++++++++++++------
3 files changed, 29 insertions(+), 10 deletions(-)
diff --git a/Documentation/hwmon/ads1015 b/Documentation/hwmon/ads1015
index f6fe9c2..063b80d 100644
--- a/Documentation/hwmon/ads1015
+++ b/Documentation/hwmon/ads1015
@@ -6,6 +6,10 @@ Supported chips:
Prefix: 'ads1015'
Datasheet: Publicly available at the Texas Instruments website :
http://focus.ti.com/lit/ds/symlink/ads1015.pdf
+ * Texas Instruments ADS1115
+ Prefix: 'ads1115'
+ Datasheet: Publicly available at the Texas Instruments website :
+ http://focus.ti.com/lit/ds/symlink/ads1115.pdf
Authors:
Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
@@ -13,9 +17,9 @@ Authors:
Description
-----------
-This driver implements support for the Texas Instruments ADS1015.
+This driver implements support for the Texas Instruments ADS1015/ADS1115.
-This device is a 12-bit A-D converter with 4 inputs.
+This device is a 12/16-bit A-D converter with 4 inputs.
The inputs can be used single ended or in certain differential combinations.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e989f7f..47b3e58 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1202,8 +1202,8 @@ config SENSORS_ADS1015
tristate "Texas Instruments ADS1015"
depends on I2C
help
- If you say yes here you get support for Texas Instruments ADS1015
- 12-bit 4-input ADC device.
+ If you say yes here you get support for Texas Instruments
+ ADS1015/ADS1115 12/16-bit 4-input ADC device.
This driver can also be built as a module. If so, the module
will be called ads1015.
diff --git a/drivers/hwmon/ads1015.c b/drivers/hwmon/ads1015.c
index 2798246..7f9dc2f 100644
--- a/drivers/hwmon/ads1015.c
+++ b/drivers/hwmon/ads1015.c
@@ -46,17 +46,28 @@ static const unsigned int fullscale_table[8] = {
6144, 4096, 2048, 1024, 512, 256, 256, 256 };
/* Data rates in samples per second */
-static const unsigned int data_rate_table[8] = {
- 128, 250, 490, 920, 1600, 2400, 3300, 3300 };
+static const unsigned int data_rate_table_1015[8] = {
+ 128, 250, 490, 920, 1600, 2400, 3300, 3300
+};
+
+static const unsigned int data_rate_table_1115[8] = {
+ 8, 16, 32, 64, 128, 250, 475, 860
+};
#define ADS1015_DEFAULT_CHANNELS 0xff
#define ADS1015_DEFAULT_PGA 2
#define ADS1015_DEFAULT_DATA_RATE 4
+enum ads1015_chips {
+ ads1015,
+ ads1115,
+};
+
struct ads1015_data {
struct device *hwmon_dev;
struct mutex update_lock; /* mutex protect updates */
struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
+ enum ads1015_chips id;
};
static int ads1015_read_adc(struct i2c_client *client, unsigned int channel)
@@ -66,6 +77,8 @@ static int ads1015_read_adc(struct i2c_client *client, unsigned int channel)
unsigned int pga = data->channel_data[channel].pga;
unsigned int data_rate = data->channel_data[channel].data_rate;
unsigned int conversion_time_ms;
+ const unsigned int * const rate_table = data->id = ads1115 ?
+ data_rate_table_1115 : data_rate_table_1015;
int res;
mutex_lock(&data->update_lock);
@@ -75,7 +88,7 @@ static int ads1015_read_adc(struct i2c_client *client, unsigned int channel)
if (res < 0)
goto err_unlock;
config = res;
- conversion_time_ms = DIV_ROUND_UP(1000, data_rate_table[data_rate]);
+ conversion_time_ms = DIV_ROUND_UP(1000, rate_table[data_rate]);
/* setup and start single conversion */
config &= 0x001f;
@@ -113,8 +126,9 @@ static int ads1015_reg_to_mv(struct i2c_client *client, unsigned int channel,
struct ads1015_data *data = i2c_get_clientdata(client);
unsigned int pga = data->channel_data[channel].pga;
int fullscale = fullscale_table[pga];
+ const unsigned mask = data->id = ads1115 ? 0x7fff : 0x7ff0;
- return DIV_ROUND_CLOSEST(reg * fullscale, 0x7ff0);
+ return DIV_ROUND_CLOSEST(reg * fullscale, mask);
}
/* sysfs callback function */
@@ -257,7 +271,7 @@ static int ads1015_probe(struct i2c_client *client,
GFP_KERNEL);
if (!data)
return -ENOMEM;
-
+ data->id = id->driver_data;
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
@@ -286,7 +300,8 @@ exit_remove:
}
static const struct i2c_device_id ads1015_id[] = {
- { "ads1015", 0 },
+ { "ads1015", ads1015},
+ { "ads1115", ads1115},
{ }
};
MODULE_DEVICE_TABLE(i2c, ads1015_id);
--
1.8.1.5
--
/Evgeniy
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [lm-sensors] [PATCH] [v2] support ads1115 to ads1015 driver
2013-08-01 19:23 [lm-sensors] [PATCH] [v2] support ads1115 to ads1015 driver Evgeniy Dushistov
@ 2013-08-01 23:22 ` Guenter Roeck
0 siblings, 0 replies; 2+ messages in thread
From: Guenter Roeck @ 2013-08-01 23:22 UTC (permalink / raw)
To: lm-sensors
On Thu, Aug 01, 2013 at 11:23:48PM +0400, Evgeniy Dushistov wrote:
> Ok, version 2 of the patch.
> Fixed Guenter Roeck's remarks.
>
> This patch adds support for ads1115 device to ads1015 driver.
> Based on work of Emiliano Carnati <carnatiatebneuro.com>.
> Tested on ARM CPU based board.
>
> Signed-off-by: Evgeniy A. Dushistov <dushistov@mail.ru>
Applied to -next.
Thanks,
Guenter
> ---
> Documentation/hwmon/ads1015 | 8 ++++++--
> drivers/hwmon/Kconfig | 4 ++--
> drivers/hwmon/ads1015.c | 27 +++++++++++++++++++++------
> 3 files changed, 29 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/hwmon/ads1015 b/Documentation/hwmon/ads1015
> index f6fe9c2..063b80d 100644
> --- a/Documentation/hwmon/ads1015
> +++ b/Documentation/hwmon/ads1015
> @@ -6,6 +6,10 @@ Supported chips:
> Prefix: 'ads1015'
> Datasheet: Publicly available at the Texas Instruments website :
> http://focus.ti.com/lit/ds/symlink/ads1015.pdf
> + * Texas Instruments ADS1115
> + Prefix: 'ads1115'
> + Datasheet: Publicly available at the Texas Instruments website :
> + http://focus.ti.com/lit/ds/symlink/ads1115.pdf
>
> Authors:
> Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
> @@ -13,9 +17,9 @@ Authors:
> Description
> -----------
>
> -This driver implements support for the Texas Instruments ADS1015.
> +This driver implements support for the Texas Instruments ADS1015/ADS1115.
>
> -This device is a 12-bit A-D converter with 4 inputs.
> +This device is a 12/16-bit A-D converter with 4 inputs.
>
> The inputs can be used single ended or in certain differential combinations.
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index e989f7f..47b3e58 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1202,8 +1202,8 @@ config SENSORS_ADS1015
> tristate "Texas Instruments ADS1015"
> depends on I2C
> help
> - If you say yes here you get support for Texas Instruments ADS1015
> - 12-bit 4-input ADC device.
> + If you say yes here you get support for Texas Instruments
> + ADS1015/ADS1115 12/16-bit 4-input ADC device.
>
> This driver can also be built as a module. If so, the module
> will be called ads1015.
> diff --git a/drivers/hwmon/ads1015.c b/drivers/hwmon/ads1015.c
> index 2798246..7f9dc2f 100644
> --- a/drivers/hwmon/ads1015.c
> +++ b/drivers/hwmon/ads1015.c
> @@ -46,17 +46,28 @@ static const unsigned int fullscale_table[8] = {
> 6144, 4096, 2048, 1024, 512, 256, 256, 256 };
>
> /* Data rates in samples per second */
> -static const unsigned int data_rate_table[8] = {
> - 128, 250, 490, 920, 1600, 2400, 3300, 3300 };
> +static const unsigned int data_rate_table_1015[8] = {
> + 128, 250, 490, 920, 1600, 2400, 3300, 3300
> +};
> +
> +static const unsigned int data_rate_table_1115[8] = {
> + 8, 16, 32, 64, 128, 250, 475, 860
> +};
>
> #define ADS1015_DEFAULT_CHANNELS 0xff
> #define ADS1015_DEFAULT_PGA 2
> #define ADS1015_DEFAULT_DATA_RATE 4
>
> +enum ads1015_chips {
> + ads1015,
> + ads1115,
> +};
> +
> struct ads1015_data {
> struct device *hwmon_dev;
> struct mutex update_lock; /* mutex protect updates */
> struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
> + enum ads1015_chips id;
> };
>
> static int ads1015_read_adc(struct i2c_client *client, unsigned int channel)
> @@ -66,6 +77,8 @@ static int ads1015_read_adc(struct i2c_client *client, unsigned int channel)
> unsigned int pga = data->channel_data[channel].pga;
> unsigned int data_rate = data->channel_data[channel].data_rate;
> unsigned int conversion_time_ms;
> + const unsigned int * const rate_table = data->id = ads1115 ?
> + data_rate_table_1115 : data_rate_table_1015;
> int res;
>
> mutex_lock(&data->update_lock);
> @@ -75,7 +88,7 @@ static int ads1015_read_adc(struct i2c_client *client, unsigned int channel)
> if (res < 0)
> goto err_unlock;
> config = res;
> - conversion_time_ms = DIV_ROUND_UP(1000, data_rate_table[data_rate]);
> + conversion_time_ms = DIV_ROUND_UP(1000, rate_table[data_rate]);
>
> /* setup and start single conversion */
> config &= 0x001f;
> @@ -113,8 +126,9 @@ static int ads1015_reg_to_mv(struct i2c_client *client, unsigned int channel,
> struct ads1015_data *data = i2c_get_clientdata(client);
> unsigned int pga = data->channel_data[channel].pga;
> int fullscale = fullscale_table[pga];
> + const unsigned mask = data->id = ads1115 ? 0x7fff : 0x7ff0;
>
> - return DIV_ROUND_CLOSEST(reg * fullscale, 0x7ff0);
> + return DIV_ROUND_CLOSEST(reg * fullscale, mask);
> }
>
> /* sysfs callback function */
> @@ -257,7 +271,7 @@ static int ads1015_probe(struct i2c_client *client,
> GFP_KERNEL);
> if (!data)
> return -ENOMEM;
> -
> + data->id = id->driver_data;
> i2c_set_clientdata(client, data);
> mutex_init(&data->update_lock);
>
> @@ -286,7 +300,8 @@ exit_remove:
> }
>
> static const struct i2c_device_id ads1015_id[] = {
> - { "ads1015", 0 },
> + { "ads1015", ads1015},
> + { "ads1115", ads1115},
> { }
> };
> MODULE_DEVICE_TABLE(i2c, ads1015_id);
> --
> 1.8.1.5
>
> --
> /Evgeniy
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-08-01 23:22 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-01 19:23 [lm-sensors] [PATCH] [v2] support ads1115 to ads1015 driver Evgeniy Dushistov
2013-08-01 23:22 ` Guenter Roeck
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.