[PATCHv3 0/3] Few ignored framebuffer fixes/additions

[PATCHv3 0/3] Few ignored framebuffer fixes/additions

[Maxime Ripard]

Hi,

This is the v2 of a set of patches that got forgotten.

These have been around for a while without any functionnal comments recently,
so I guess we should be pretty close to merge them.

It would be great if we could have comments from the maintainer on these
patches though (three patches iterations and 41 days since last sign of life of
the maintainer).

Thanks,
Maxime

Changes from v2:
  - Few minor coding style fixes
  - Removed the useless msleep(100) in the hx8369 init function

Changes from v1:
  - Fix line wrapping in patch 2
  - Added some comments on the msleep in patch 3


Alexandre Belloni (1):
  fb: backlight: HX8357: Add HX8369 support

Hector Palacios (1):
  video: mxsfb: fix color settings for 18bit data bus and 32bpp

Maxime Ripard (1):
  video: hx8357: Make IM pins optional

 drivers/video/backlight/hx8357.c | 269 ++++++++++++++++++++++++++++++++++-----
 drivers/video/mxsfb.c            |  26 ----
 2 files changed, 234 insertions(+), 61 deletions(-)

-- 
1.8.3.4

[PATCHv3 0/3] Few ignored framebuffer fixes/additions

[Maxime Ripard]

Hi,

This is the v2 of a set of patches that got forgotten.

These have been around for a while without any functionnal comments recently,
so I guess we should be pretty close to merge them.

It would be great if we could have comments from the maintainer on these
patches though (three patches iterations and 41 days since last sign of life of
the maintainer).

Thanks,
Maxime

Changes from v2:
  - Few minor coding style fixes
  - Removed the useless msleep(100) in the hx8369 init function

Changes from v1:
  - Fix line wrapping in patch 2
  - Added some comments on the msleep in patch 3


Alexandre Belloni (1):
  fb: backlight: HX8357: Add HX8369 support

Hector Palacios (1):
  video: mxsfb: fix color settings for 18bit data bus and 32bpp

Maxime Ripard (1):
  video: hx8357: Make IM pins optional

 drivers/video/backlight/hx8357.c | 269 ++++++++++++++++++++++++++++++++++-----
 drivers/video/mxsfb.c            |  26 ----
 2 files changed, 234 insertions(+), 61 deletions(-)

-- 
1.8.3.4

[PATCHv3 0/3] Few ignored framebuffer fixes/additions

[Maxime Ripard]

Hi,

This is the v2 of a set of patches that got forgotten.

These have been around for a while without any functionnal comments recently,
so I guess we should be pretty close to merge them.

It would be great if we could have comments from the maintainer on these
patches though (three patches iterations and 41 days since last sign of life of
the maintainer).

Thanks,
Maxime

Changes from v2:
  - Few minor coding style fixes
  - Removed the useless msleep(100) in the hx8369 init function

Changes from v1:
  - Fix line wrapping in patch 2
  - Added some comments on the msleep in patch 3


Alexandre Belloni (1):
  fb: backlight: HX8357: Add HX8369 support

Hector Palacios (1):
  video: mxsfb: fix color settings for 18bit data bus and 32bpp

Maxime Ripard (1):
  video: hx8357: Make IM pins optional

 drivers/video/backlight/hx8357.c | 269 ++++++++++++++++++++++++++++++++++-----
 drivers/video/mxsfb.c            |  26 ----
 2 files changed, 234 insertions(+), 61 deletions(-)

-- 
1.8.3.4

[PATCHv3 1/3] video: mxsfb: fix color settings for 18bit data bus and 32bpp

[Maxime Ripard]

From: Hector Palacios <hector.palacios@digi.com>

For a combination of 18bit LCD data bus width and a color
mode of 32bpp, the driver was setting the color mapping to
rgb666, which is wrong, as the color in memory realy has an
rgb888 layout.

This patch also removes the setting of flag CTRL_DF24 that
makes the driver dimiss the upper 2 bits when handling 32/24bpp
colors in a diplay with 18bit data bus width. This flag made
true color images display wrong in such configurations.

Finally, the color mapping rgb666 has also been removed as nobody
is using it and high level applications like Qt5 cannot work
with it either.

Reference: https://lkml.org/lkml/2013/5/23/220
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Acked-by: Juergen Beisert <jbe@pengutronix.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/video/mxsfb.c | 26 --------------------------
 1 file changed, 26 deletions(-)

diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 3ba3771..dc09ebe 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -239,24 +239,6 @@ static const struct fb_bitfield def_rgb565[] = {
 	}
 };
 
-static const struct fb_bitfield def_rgb666[] = {
-	[RED] = {
-		.offset = 16,
-		.length = 6,
-	},
-	[GREEN] = {
-		.offset = 8,
-		.length = 6,
-	},
-	[BLUE] = {
-		.offset = 0,
-		.length = 6,
-	},
-	[TRANSP] = {	/* no support for transparency */
-		.length = 0,
-	}
-};
-
 static const struct fb_bitfield def_rgb888[] = {
 	[RED] = {
 		.offset = 16,
@@ -309,9 +291,6 @@ static int mxsfb_check_var(struct fb_var_screeninfo *var,
 			break;
 		case STMLCDIF_16BIT:
 		case STMLCDIF_18BIT:
-			/* 24 bit to 18 bit mapping */
-			rgb = def_rgb666;
-			break;
 		case STMLCDIF_24BIT:
 			/* real 24 bit */
 			rgb = def_rgb888;
@@ -453,11 +432,6 @@ static int mxsfb_set_par(struct fb_info *fb_info)
 			return -EINVAL;
 		case STMLCDIF_16BIT:
 		case STMLCDIF_18BIT:
-			/* 24 bit to 18 bit mapping */
-			ctrl |= CTRL_DF24; /* ignore the upper 2 bits in
-					    *  each colour component
-					    */
-			break;
 		case STMLCDIF_24BIT:
 			/* real 24 bit */
 			break;
-- 
1.8.3.4

[PATCHv3 1/3] video: mxsfb: fix color settings for 18bit data bus and 32bpp

[Maxime Ripard]

From: Hector Palacios <hector.palacios@digi.com>

For a combination of 18bit LCD data bus width and a color
mode of 32bpp, the driver was setting the color mapping to
rgb666, which is wrong, as the color in memory realy has an
rgb888 layout.

This patch also removes the setting of flag CTRL_DF24 that
makes the driver dimiss the upper 2 bits when handling 32/24bpp
colors in a diplay with 18bit data bus width. This flag made
true color images display wrong in such configurations.

Finally, the color mapping rgb666 has also been removed as nobody
is using it and high level applications like Qt5 cannot work
with it either.

Reference: https://lkml.org/lkml/2013/5/23/220
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Acked-by: Juergen Beisert <jbe@pengutronix.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/video/mxsfb.c | 26 --------------------------
 1 file changed, 26 deletions(-)

diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 3ba3771..dc09ebe 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -239,24 +239,6 @@ static const struct fb_bitfield def_rgb565[] = {
 	}
 };
 
-static const struct fb_bitfield def_rgb666[] = {
-	[RED] = {
-		.offset = 16,
-		.length = 6,
-	},
-	[GREEN] = {
-		.offset = 8,
-		.length = 6,
-	},
-	[BLUE] = {
-		.offset = 0,
-		.length = 6,
-	},
-	[TRANSP] = {	/* no support for transparency */
-		.length = 0,
-	}
-};
-
 static const struct fb_bitfield def_rgb888[] = {
 	[RED] = {
 		.offset = 16,
@@ -309,9 +291,6 @@ static int mxsfb_check_var(struct fb_var_screeninfo *var,
 			break;
 		case STMLCDIF_16BIT:
 		case STMLCDIF_18BIT:
-			/* 24 bit to 18 bit mapping */
-			rgb = def_rgb666;
-			break;
 		case STMLCDIF_24BIT:
 			/* real 24 bit */
 			rgb = def_rgb888;
@@ -453,11 +432,6 @@ static int mxsfb_set_par(struct fb_info *fb_info)
 			return -EINVAL;
 		case STMLCDIF_16BIT:
 		case STMLCDIF_18BIT:
-			/* 24 bit to 18 bit mapping */
-			ctrl |= CTRL_DF24; /* ignore the upper 2 bits in
-					    *  each colour component
-					    */
-			break;
 		case STMLCDIF_24BIT:
 			/* real 24 bit */
 			break;
-- 
1.8.3.4

[PATCHv3 1/3] video: mxsfb: fix color settings for 18bit data bus and 32bpp

[Maxime Ripard]

From: Hector Palacios <hector.palacios@digi.com>

For a combination of 18bit LCD data bus width and a color
mode of 32bpp, the driver was setting the color mapping to
rgb666, which is wrong, as the color in memory realy has an
rgb888 layout.

This patch also removes the setting of flag CTRL_DF24 that
makes the driver dimiss the upper 2 bits when handling 32/24bpp
colors in a diplay with 18bit data bus width. This flag made
true color images display wrong in such configurations.

Finally, the color mapping rgb666 has also been removed as nobody
is using it and high level applications like Qt5 cannot work
with it either.

Reference: https://lkml.org/lkml/2013/5/23/220
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Acked-by: Juergen Beisert <jbe@pengutronix.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/video/mxsfb.c | 26 --------------------------
 1 file changed, 26 deletions(-)

diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 3ba3771..dc09ebe 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -239,24 +239,6 @@ static const struct fb_bitfield def_rgb565[] = {
 	}
 };
 
-static const struct fb_bitfield def_rgb666[] = {
-	[RED] = {
-		.offset = 16,
-		.length = 6,
-	},
-	[GREEN] = {
-		.offset = 8,
-		.length = 6,
-	},
-	[BLUE] = {
-		.offset = 0,
-		.length = 6,
-	},
-	[TRANSP] = {	/* no support for transparency */
-		.length = 0,
-	}
-};
-
 static const struct fb_bitfield def_rgb888[] = {
 	[RED] = {
 		.offset = 16,
@@ -309,9 +291,6 @@ static int mxsfb_check_var(struct fb_var_screeninfo *var,
 			break;
 		case STMLCDIF_16BIT:
 		case STMLCDIF_18BIT:
-			/* 24 bit to 18 bit mapping */
-			rgb = def_rgb666;
-			break;
 		case STMLCDIF_24BIT:
 			/* real 24 bit */
 			rgb = def_rgb888;
@@ -453,11 +432,6 @@ static int mxsfb_set_par(struct fb_info *fb_info)
 			return -EINVAL;
 		case STMLCDIF_16BIT:
 		case STMLCDIF_18BIT:
-			/* 24 bit to 18 bit mapping */
-			ctrl |= CTRL_DF24; /* ignore the upper 2 bits in
-					    *  each colour component
-					    */
-			break;
 		case STMLCDIF_24BIT:
 			/* real 24 bit */
 			break;
-- 
1.8.3.4

[PATCHv3 2/3] video: hx8357: Make IM pins optional

[Maxime Ripard]

The IM pins of the HX8357 controller are used to define the interface
used to feed pixel stream to the LCD panel.

Most of the time, these pins are directly routed to either the ground or
the VCC to set their values.

Remove the need to assign GPIOs to these pins when we are in such a case.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
---
 drivers/video/backlight/hx8357.c | 52 ++++++++++++++++++++++++----------------
 1 file changed, 31 insertions(+), 21 deletions(-)

diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
index a0482b5..47237fa 100644
--- a/drivers/video/backlight/hx8357.c
+++ b/drivers/video/backlight/hx8357.c
@@ -76,6 +76,7 @@ struct hx8357_data {
 	unsigned		reset;
 	struct spi_device	*spi;
 	int			state;
+	bool			use_im_pins;
 };
 
 static u8 hx8357_seq_power[] = {
@@ -250,9 +251,11 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
 	 * Set the interface selection pins to SPI mode, with three
 	 * wires
 	 */
-	gpio_set_value_cansleep(lcd->im_pins[0], 1);
-	gpio_set_value_cansleep(lcd->im_pins[1], 0);
-	gpio_set_value_cansleep(lcd->im_pins[2], 1);
+	if (lcd->use_im_pins) {
+		gpio_set_value_cansleep(lcd->im_pins[0], 1);
+		gpio_set_value_cansleep(lcd->im_pins[1], 0);
+		gpio_set_value_cansleep(lcd->im_pins[2], 1);
+	}
 
 	/* Reset the screen */
 	gpio_set_value(lcd->reset, 1);
@@ -424,25 +427,32 @@ static int hx8357_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
-		lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
-						"im-gpios", i);
-		if (lcd->im_pins[i] == -EPROBE_DEFER) {
-			dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
-			return -EPROBE_DEFER;
-		}
-		if (!gpio_is_valid(lcd->im_pins[i])) {
-			dev_err(&spi->dev, "Missing dt property: im-gpios\n");
-			return -EINVAL;
-		}
-
-		ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
-					GPIOF_OUT_INIT_LOW, "im_pins");
-		if (ret) {
-			dev_err(&spi->dev, "failed to request gpio %d: %d\n",
-				lcd->im_pins[i], ret);
-			return -EINVAL;
+	if (of_find_property(spi->dev.of_node, "im-gpios", NULL)) {
+		lcd->use_im_pins = 1;
+
+		for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
+			lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
+							    "im-gpios", i);
+			if (lcd->im_pins[i] == -EPROBE_DEFER) {
+				dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
+				return -EPROBE_DEFER;
+			}
+			if (!gpio_is_valid(lcd->im_pins[i])) {
+				dev_err(&spi->dev, "Missing dt property: im-gpios\n");
+				return -EINVAL;
+			}
+
+			ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
+						    GPIOF_OUT_INIT_LOW,
+						    "im_pins");
+			if (ret) {
+				dev_err(&spi->dev, "failed to request gpio %d: %d\n",
+					lcd->im_pins[i], ret);
+				return -EINVAL;
+			}
 		}
+	} else {
+		lcd->use_im_pins = 0;
 	}
 
 	lcdev = lcd_device_register("mxsfb", &spi->dev, lcd, &hx8357_ops);
-- 
1.8.3.4

[PATCHv3 2/3] video: hx8357: Make IM pins optional

[Maxime Ripard]

The IM pins of the HX8357 controller are used to define the interface
used to feed pixel stream to the LCD panel.

Most of the time, these pins are directly routed to either the ground or
the VCC to set their values.

Remove the need to assign GPIOs to these pins when we are in such a case.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
---
 drivers/video/backlight/hx8357.c | 52 ++++++++++++++++++++++++----------------
 1 file changed, 31 insertions(+), 21 deletions(-)

diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
index a0482b5..47237fa 100644
--- a/drivers/video/backlight/hx8357.c
+++ b/drivers/video/backlight/hx8357.c
@@ -76,6 +76,7 @@ struct hx8357_data {
 	unsigned		reset;
 	struct spi_device	*spi;
 	int			state;
+	bool			use_im_pins;
 };
 
 static u8 hx8357_seq_power[] = {
@@ -250,9 +251,11 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
 	 * Set the interface selection pins to SPI mode, with three
 	 * wires
 	 */
-	gpio_set_value_cansleep(lcd->im_pins[0], 1);
-	gpio_set_value_cansleep(lcd->im_pins[1], 0);
-	gpio_set_value_cansleep(lcd->im_pins[2], 1);
+	if (lcd->use_im_pins) {
+		gpio_set_value_cansleep(lcd->im_pins[0], 1);
+		gpio_set_value_cansleep(lcd->im_pins[1], 0);
+		gpio_set_value_cansleep(lcd->im_pins[2], 1);
+	}
 
 	/* Reset the screen */
 	gpio_set_value(lcd->reset, 1);
@@ -424,25 +427,32 @@ static int hx8357_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
-		lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
-						"im-gpios", i);
-		if (lcd->im_pins[i] = -EPROBE_DEFER) {
-			dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
-			return -EPROBE_DEFER;
-		}
-		if (!gpio_is_valid(lcd->im_pins[i])) {
-			dev_err(&spi->dev, "Missing dt property: im-gpios\n");
-			return -EINVAL;
-		}
-
-		ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
-					GPIOF_OUT_INIT_LOW, "im_pins");
-		if (ret) {
-			dev_err(&spi->dev, "failed to request gpio %d: %d\n",
-				lcd->im_pins[i], ret);
-			return -EINVAL;
+	if (of_find_property(spi->dev.of_node, "im-gpios", NULL)) {
+		lcd->use_im_pins = 1;
+
+		for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
+			lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
+							    "im-gpios", i);
+			if (lcd->im_pins[i] = -EPROBE_DEFER) {
+				dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
+				return -EPROBE_DEFER;
+			}
+			if (!gpio_is_valid(lcd->im_pins[i])) {
+				dev_err(&spi->dev, "Missing dt property: im-gpios\n");
+				return -EINVAL;
+			}
+
+			ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
+						    GPIOF_OUT_INIT_LOW,
+						    "im_pins");
+			if (ret) {
+				dev_err(&spi->dev, "failed to request gpio %d: %d\n",
+					lcd->im_pins[i], ret);
+				return -EINVAL;
+			}
 		}
+	} else {
+		lcd->use_im_pins = 0;
 	}
 
 	lcdev = lcd_device_register("mxsfb", &spi->dev, lcd, &hx8357_ops);
-- 
1.8.3.4

[PATCHv3 2/3] video: hx8357: Make IM pins optional

[Maxime Ripard]

The IM pins of the HX8357 controller are used to define the interface
used to feed pixel stream to the LCD panel.

Most of the time, these pins are directly routed to either the ground or
the VCC to set their values.

Remove the need to assign GPIOs to these pins when we are in such a case.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
---
 drivers/video/backlight/hx8357.c | 52 ++++++++++++++++++++++++----------------
 1 file changed, 31 insertions(+), 21 deletions(-)

diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
index a0482b5..47237fa 100644
--- a/drivers/video/backlight/hx8357.c
+++ b/drivers/video/backlight/hx8357.c
@@ -76,6 +76,7 @@ struct hx8357_data {
 	unsigned		reset;
 	struct spi_device	*spi;
 	int			state;
+	bool			use_im_pins;
 };
 
 static u8 hx8357_seq_power[] = {
@@ -250,9 +251,11 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
 	 * Set the interface selection pins to SPI mode, with three
 	 * wires
 	 */
-	gpio_set_value_cansleep(lcd->im_pins[0], 1);
-	gpio_set_value_cansleep(lcd->im_pins[1], 0);
-	gpio_set_value_cansleep(lcd->im_pins[2], 1);
+	if (lcd->use_im_pins) {
+		gpio_set_value_cansleep(lcd->im_pins[0], 1);
+		gpio_set_value_cansleep(lcd->im_pins[1], 0);
+		gpio_set_value_cansleep(lcd->im_pins[2], 1);
+	}
 
 	/* Reset the screen */
 	gpio_set_value(lcd->reset, 1);
@@ -424,25 +427,32 @@ static int hx8357_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
-		lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
-						"im-gpios", i);
-		if (lcd->im_pins[i] == -EPROBE_DEFER) {
-			dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
-			return -EPROBE_DEFER;
-		}
-		if (!gpio_is_valid(lcd->im_pins[i])) {
-			dev_err(&spi->dev, "Missing dt property: im-gpios\n");
-			return -EINVAL;
-		}
-
-		ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
-					GPIOF_OUT_INIT_LOW, "im_pins");
-		if (ret) {
-			dev_err(&spi->dev, "failed to request gpio %d: %d\n",
-				lcd->im_pins[i], ret);
-			return -EINVAL;
+	if (of_find_property(spi->dev.of_node, "im-gpios", NULL)) {
+		lcd->use_im_pins = 1;
+
+		for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
+			lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
+							    "im-gpios", i);
+			if (lcd->im_pins[i] == -EPROBE_DEFER) {
+				dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
+				return -EPROBE_DEFER;
+			}
+			if (!gpio_is_valid(lcd->im_pins[i])) {
+				dev_err(&spi->dev, "Missing dt property: im-gpios\n");
+				return -EINVAL;
+			}
+
+			ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
+						    GPIOF_OUT_INIT_LOW,
+						    "im_pins");
+			if (ret) {
+				dev_err(&spi->dev, "failed to request gpio %d: %d\n",
+					lcd->im_pins[i], ret);
+				return -EINVAL;
+			}
 		}
+	} else {
+		lcd->use_im_pins = 0;
 	}
 
 	lcdev = lcd_device_register("mxsfb", &spi->dev, lcd, &hx8357_ops);
-- 
1.8.3.4

[PATCHv3 3/3] fb: backlight: HX8357: Add HX8369 support

[Maxime Ripard]

From: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Add support for the Himax HX8369 controller as it is quite similar to the
hx8357.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
---
 drivers/video/backlight/hx8357.c | 219 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 204 insertions(+), 15 deletions(-)

diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
index 47237fa..c7af8c4 100644
--- a/drivers/video/backlight/hx8357.c
+++ b/drivers/video/backlight/hx8357.c
@@ -71,6 +71,18 @@
 #define HX8357_SET_POWER_NORMAL		0xd2
 #define HX8357_SET_PANEL_RELATED	0xe9
 
+#define HX8369_SET_DISPLAY_BRIGHTNESS		0x51
+#define HX8369_WRITE_CABC_DISPLAY_VALUE		0x53
+#define HX8369_WRITE_CABC_BRIGHT_CTRL		0x55
+#define HX8369_WRITE_CABC_MIN_BRIGHTNESS	0x5e
+#define HX8369_SET_POWER			0xb1
+#define HX8369_SET_DISPLAY_MODE			0xb2
+#define HX8369_SET_DISPLAY_WAVEFORM_CYC		0xb4
+#define HX8369_SET_VCOM				0xb6
+#define HX8369_SET_EXTENSION_COMMAND		0xb9
+#define HX8369_SET_GIP				0xd5
+#define HX8369_SET_GAMMA_CURVE_RELATED		0xe0
+
 struct hx8357_data {
 	unsigned		im_pins[HX8357_NUM_IM_PINS];
 	unsigned		reset;
@@ -144,6 +156,61 @@ static u8 hx8357_seq_display_mode[] = {
 	HX8357_SET_DISPLAY_MODE_RGB_INTERFACE,
 };
 
+static u8 hx8369_seq_write_CABC_min_brightness[] = {
+	HX8369_WRITE_CABC_MIN_BRIGHTNESS, 0x00,
+};
+
+static u8 hx8369_seq_write_CABC_control[] = {
+	HX8369_WRITE_CABC_DISPLAY_VALUE, 0x24,
+};
+
+static u8 hx8369_seq_set_display_brightness[] = {
+	HX8369_SET_DISPLAY_BRIGHTNESS, 0xFF,
+};
+
+static u8 hx8369_seq_write_CABC_control_setting[] = {
+	HX8369_WRITE_CABC_BRIGHT_CTRL, 0x02,
+};
+
+static u8 hx8369_seq_extension_command[] = {
+	HX8369_SET_EXTENSION_COMMAND, 0xff, 0x83, 0x69,
+};
+
+static u8 hx8369_seq_display_related[] = {
+	HX8369_SET_DISPLAY_MODE, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00,
+	0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00,	0x01,
+};
+
+static u8 hx8369_seq_panel_waveform_cycle[] = {
+	HX8369_SET_DISPLAY_WAVEFORM_CYC, 0x0a, 0x1d, 0x80, 0x06, 0x02,
+};
+
+static u8 hx8369_seq_set_address_mode[] = {
+	HX8357_SET_ADDRESS_MODE, 0x00,
+};
+
+static u8 hx8369_seq_vcom[] = {
+	HX8369_SET_VCOM, 0x3e, 0x3e,
+};
+
+static u8 hx8369_seq_gip[] = {
+	HX8369_SET_GIP, 0x00, 0x01, 0x03, 0x25, 0x01, 0x02, 0x28, 0x70,
+	0x11, 0x13, 0x00, 0x00, 0x40, 0x26, 0x51, 0x37, 0x00, 0x00, 0x71,
+	0x35, 0x60, 0x24, 0x07, 0x0f, 0x04, 0x04,
+};
+
+static u8 hx8369_seq_power[] = {
+	HX8369_SET_POWER, 0x01, 0x00, 0x34, 0x03, 0x00, 0x11, 0x11, 0x32,
+	0x2f, 0x3f, 0x3f, 0x01, 0x3a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6,
+};
+
+static u8 hx8369_seq_gamma_curve_related[] = {
+	HX8369_SET_GAMMA_CURVE_RELATED, 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d,
+	0x2e, 0x4a, 0x08, 0x0e, 0x0f, 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
+	0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, 0x2e, 0x4a, 0x08, 0x0e, 0x0f,
+	0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
+};
+
 static int hx8357_spi_write_then_read(struct lcd_device *lcdev,
 				u8 *txbuf, u16 txlen,
 				u8 *rxbuf, u16 rxlen)
@@ -220,6 +287,10 @@ static int hx8357_enter_standby(struct lcd_device *lcdev)
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * The controller needs 120ms when entering in sleep mode before we can
+	 * send the command to go off sleep mode
+	 */
 	msleep(120);
 
 	return 0;
@@ -233,6 +304,10 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * The controller needs 120ms when exiting from sleep mode before we
+	 * can send the command to enter in sleep mode
+	 */
 	msleep(120);
 
 	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
@@ -242,6 +317,21 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
 	return 0;
 }
 
+static void hx8357_lcd_reset(struct lcd_device *lcdev)
+{
+	struct hx8357_data *lcd = lcd_get_data(lcdev);
+
+	/* Reset the screen */
+	gpio_set_value(lcd->reset, 1);
+	usleep_range(10000, 12000);
+	gpio_set_value(lcd->reset, 0);
+	usleep_range(10000, 12000);
+	gpio_set_value(lcd->reset, 1);
+
+	/* The controller needs 120ms to recover from reset */
+	msleep(120);
+}
+
 static int hx8357_lcd_init(struct lcd_device *lcdev)
 {
 	struct hx8357_data *lcd = lcd_get_data(lcdev);
@@ -257,14 +347,6 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
 		gpio_set_value_cansleep(lcd->im_pins[2], 1);
 	}
 
-	/* Reset the screen */
-	gpio_set_value(lcd->reset, 1);
-	usleep_range(10000, 12000);
-	gpio_set_value(lcd->reset, 0);
-	usleep_range(10000, 12000);
-	gpio_set_value(lcd->reset, 1);
-	msleep(120);
-
 	ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
 				ARRAY_SIZE(hx8357_seq_power));
 	if (ret < 0)
@@ -344,6 +426,9 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * The controller needs 120ms to fully recover from exiting sleep mode
+	 */
 	msleep(120);
 
 	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
@@ -359,6 +444,96 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
 	return 0;
 }
 
+static int hx8369_lcd_init(struct lcd_device *lcdev)
+{
+	int ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_extension_command,
+				ARRAY_SIZE(hx8369_seq_extension_command));
+	if (ret < 0)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_display_related,
+				ARRAY_SIZE(hx8369_seq_display_related));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_panel_waveform_cycle,
+				ARRAY_SIZE(hx8369_seq_panel_waveform_cycle));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_address_mode,
+				ARRAY_SIZE(hx8369_seq_set_address_mode));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_vcom,
+				ARRAY_SIZE(hx8369_seq_vcom));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_gip,
+				ARRAY_SIZE(hx8369_seq_gip));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_power,
+				ARRAY_SIZE(hx8369_seq_power));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * The controller needs 120ms to fully recover from exiting sleep mode
+	 */
+	msleep(120);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_gamma_curve_related,
+				ARRAY_SIZE(hx8369_seq_gamma_curve_related));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
+	if (ret < 0)
+		return ret;
+	usleep_range(1000, 1200);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_write_CABC_control,
+				ARRAY_SIZE(hx8369_seq_write_CABC_control));
+	if (ret < 0)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = hx8357_spi_write_array(lcdev,
+			hx8369_seq_write_CABC_control_setting,
+			ARRAY_SIZE(hx8369_seq_write_CABC_control_setting));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev,
+			hx8369_seq_write_CABC_min_brightness,
+			ARRAY_SIZE(hx8369_seq_write_CABC_min_brightness));
+	if (ret < 0)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_display_brightness,
+				ARRAY_SIZE(hx8369_seq_set_display_brightness));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 #define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
 
 static int hx8357_set_power(struct lcd_device *lcdev, int power)
@@ -391,10 +566,24 @@ static struct lcd_ops hx8357_ops = {
 	.get_power	= hx8357_get_power,
 };
 
+static const struct of_device_id hx8357_dt_ids[] = {
+	{
+		.compatible = "himax,hx8357",
+		.data = hx8357_lcd_init,
+	},
+	{
+		.compatible = "himax,hx8369",
+		.data = hx8369_lcd_init,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
+
 static int hx8357_probe(struct spi_device *spi)
 {
 	struct lcd_device *lcdev;
 	struct hx8357_data *lcd;
+	const struct of_device_id *match;
 	int i, ret;
 
 	lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
@@ -411,6 +600,10 @@ static int hx8357_probe(struct spi_device *spi)
 
 	lcd->spi = spi;
 
+	match = of_match_device(hx8357_dt_ids, &spi->dev);
+	if (!match || !match->data)
+		return -EINVAL;
+
 	lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0);
 	if (!gpio_is_valid(lcd->reset)) {
 		dev_err(&spi->dev, "Missing dt property: gpios-reset\n");
@@ -462,7 +655,9 @@ static int hx8357_probe(struct spi_device *spi)
 	}
 	spi_set_drvdata(spi, lcdev);
 
-	ret = hx8357_lcd_init(lcdev);
+	hx8357_lcd_reset(lcdev);
+
+	ret = ((int (*)(struct lcd_device *))match->data)(lcdev);
 	if (ret) {
 		dev_err(&spi->dev, "Couldn't initialize panel\n");
 		goto init_error;
@@ -485,12 +680,6 @@ static int hx8357_remove(struct spi_device *spi)
 	return 0;
 }
 
-static const struct of_device_id hx8357_dt_ids[] = {
-	{ .compatible = "himax,hx8357" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
-
 static struct spi_driver hx8357_driver = {
 	.probe  = hx8357_probe,
 	.remove = hx8357_remove,
-- 
1.8.3.4

[PATCHv3 3/3] fb: backlight: HX8357: Add HX8369 support

[Maxime Ripard]

From: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Add support for the Himax HX8369 controller as it is quite similar to the
hx8357.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
---
 drivers/video/backlight/hx8357.c | 219 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 204 insertions(+), 15 deletions(-)

diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
index 47237fa..c7af8c4 100644
--- a/drivers/video/backlight/hx8357.c
+++ b/drivers/video/backlight/hx8357.c
@@ -71,6 +71,18 @@
 #define HX8357_SET_POWER_NORMAL		0xd2
 #define HX8357_SET_PANEL_RELATED	0xe9
 
+#define HX8369_SET_DISPLAY_BRIGHTNESS		0x51
+#define HX8369_WRITE_CABC_DISPLAY_VALUE		0x53
+#define HX8369_WRITE_CABC_BRIGHT_CTRL		0x55
+#define HX8369_WRITE_CABC_MIN_BRIGHTNESS	0x5e
+#define HX8369_SET_POWER			0xb1
+#define HX8369_SET_DISPLAY_MODE			0xb2
+#define HX8369_SET_DISPLAY_WAVEFORM_CYC		0xb4
+#define HX8369_SET_VCOM				0xb6
+#define HX8369_SET_EXTENSION_COMMAND		0xb9
+#define HX8369_SET_GIP				0xd5
+#define HX8369_SET_GAMMA_CURVE_RELATED		0xe0
+
 struct hx8357_data {
 	unsigned		im_pins[HX8357_NUM_IM_PINS];
 	unsigned		reset;
@@ -144,6 +156,61 @@ static u8 hx8357_seq_display_mode[] = {
 	HX8357_SET_DISPLAY_MODE_RGB_INTERFACE,
 };
 
+static u8 hx8369_seq_write_CABC_min_brightness[] = {
+	HX8369_WRITE_CABC_MIN_BRIGHTNESS, 0x00,
+};
+
+static u8 hx8369_seq_write_CABC_control[] = {
+	HX8369_WRITE_CABC_DISPLAY_VALUE, 0x24,
+};
+
+static u8 hx8369_seq_set_display_brightness[] = {
+	HX8369_SET_DISPLAY_BRIGHTNESS, 0xFF,
+};
+
+static u8 hx8369_seq_write_CABC_control_setting[] = {
+	HX8369_WRITE_CABC_BRIGHT_CTRL, 0x02,
+};
+
+static u8 hx8369_seq_extension_command[] = {
+	HX8369_SET_EXTENSION_COMMAND, 0xff, 0x83, 0x69,
+};
+
+static u8 hx8369_seq_display_related[] = {
+	HX8369_SET_DISPLAY_MODE, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00,
+	0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00,	0x01,
+};
+
+static u8 hx8369_seq_panel_waveform_cycle[] = {
+	HX8369_SET_DISPLAY_WAVEFORM_CYC, 0x0a, 0x1d, 0x80, 0x06, 0x02,
+};
+
+static u8 hx8369_seq_set_address_mode[] = {
+	HX8357_SET_ADDRESS_MODE, 0x00,
+};
+
+static u8 hx8369_seq_vcom[] = {
+	HX8369_SET_VCOM, 0x3e, 0x3e,
+};
+
+static u8 hx8369_seq_gip[] = {
+	HX8369_SET_GIP, 0x00, 0x01, 0x03, 0x25, 0x01, 0x02, 0x28, 0x70,
+	0x11, 0x13, 0x00, 0x00, 0x40, 0x26, 0x51, 0x37, 0x00, 0x00, 0x71,
+	0x35, 0x60, 0x24, 0x07, 0x0f, 0x04, 0x04,
+};
+
+static u8 hx8369_seq_power[] = {
+	HX8369_SET_POWER, 0x01, 0x00, 0x34, 0x03, 0x00, 0x11, 0x11, 0x32,
+	0x2f, 0x3f, 0x3f, 0x01, 0x3a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6,
+};
+
+static u8 hx8369_seq_gamma_curve_related[] = {
+	HX8369_SET_GAMMA_CURVE_RELATED, 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d,
+	0x2e, 0x4a, 0x08, 0x0e, 0x0f, 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
+	0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, 0x2e, 0x4a, 0x08, 0x0e, 0x0f,
+	0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
+};
+
 static int hx8357_spi_write_then_read(struct lcd_device *lcdev,
 				u8 *txbuf, u16 txlen,
 				u8 *rxbuf, u16 rxlen)
@@ -220,6 +287,10 @@ static int hx8357_enter_standby(struct lcd_device *lcdev)
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * The controller needs 120ms when entering in sleep mode before we can
+	 * send the command to go off sleep mode
+	 */
 	msleep(120);
 
 	return 0;
@@ -233,6 +304,10 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * The controller needs 120ms when exiting from sleep mode before we
+	 * can send the command to enter in sleep mode
+	 */
 	msleep(120);
 
 	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
@@ -242,6 +317,21 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
 	return 0;
 }
 
+static void hx8357_lcd_reset(struct lcd_device *lcdev)
+{
+	struct hx8357_data *lcd = lcd_get_data(lcdev);
+
+	/* Reset the screen */
+	gpio_set_value(lcd->reset, 1);
+	usleep_range(10000, 12000);
+	gpio_set_value(lcd->reset, 0);
+	usleep_range(10000, 12000);
+	gpio_set_value(lcd->reset, 1);
+
+	/* The controller needs 120ms to recover from reset */
+	msleep(120);
+}
+
 static int hx8357_lcd_init(struct lcd_device *lcdev)
 {
 	struct hx8357_data *lcd = lcd_get_data(lcdev);
@@ -257,14 +347,6 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
 		gpio_set_value_cansleep(lcd->im_pins[2], 1);
 	}
 
-	/* Reset the screen */
-	gpio_set_value(lcd->reset, 1);
-	usleep_range(10000, 12000);
-	gpio_set_value(lcd->reset, 0);
-	usleep_range(10000, 12000);
-	gpio_set_value(lcd->reset, 1);
-	msleep(120);
-
 	ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
 				ARRAY_SIZE(hx8357_seq_power));
 	if (ret < 0)
@@ -344,6 +426,9 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * The controller needs 120ms to fully recover from exiting sleep mode
+	 */
 	msleep(120);
 
 	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
@@ -359,6 +444,96 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
 	return 0;
 }
 
+static int hx8369_lcd_init(struct lcd_device *lcdev)
+{
+	int ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_extension_command,
+				ARRAY_SIZE(hx8369_seq_extension_command));
+	if (ret < 0)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_display_related,
+				ARRAY_SIZE(hx8369_seq_display_related));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_panel_waveform_cycle,
+				ARRAY_SIZE(hx8369_seq_panel_waveform_cycle));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_address_mode,
+				ARRAY_SIZE(hx8369_seq_set_address_mode));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_vcom,
+				ARRAY_SIZE(hx8369_seq_vcom));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_gip,
+				ARRAY_SIZE(hx8369_seq_gip));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_power,
+				ARRAY_SIZE(hx8369_seq_power));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * The controller needs 120ms to fully recover from exiting sleep mode
+	 */
+	msleep(120);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_gamma_curve_related,
+				ARRAY_SIZE(hx8369_seq_gamma_curve_related));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
+	if (ret < 0)
+		return ret;
+	usleep_range(1000, 1200);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_write_CABC_control,
+				ARRAY_SIZE(hx8369_seq_write_CABC_control));
+	if (ret < 0)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = hx8357_spi_write_array(lcdev,
+			hx8369_seq_write_CABC_control_setting,
+			ARRAY_SIZE(hx8369_seq_write_CABC_control_setting));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev,
+			hx8369_seq_write_CABC_min_brightness,
+			ARRAY_SIZE(hx8369_seq_write_CABC_min_brightness));
+	if (ret < 0)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_display_brightness,
+				ARRAY_SIZE(hx8369_seq_set_display_brightness));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 #define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
 
 static int hx8357_set_power(struct lcd_device *lcdev, int power)
@@ -391,10 +566,24 @@ static struct lcd_ops hx8357_ops = {
 	.get_power	= hx8357_get_power,
 };
 
+static const struct of_device_id hx8357_dt_ids[] = {
+	{
+		.compatible = "himax,hx8357",
+		.data = hx8357_lcd_init,
+	},
+	{
+		.compatible = "himax,hx8369",
+		.data = hx8369_lcd_init,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
+
 static int hx8357_probe(struct spi_device *spi)
 {
 	struct lcd_device *lcdev;
 	struct hx8357_data *lcd;
+	const struct of_device_id *match;
 	int i, ret;
 
 	lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
@@ -411,6 +600,10 @@ static int hx8357_probe(struct spi_device *spi)
 
 	lcd->spi = spi;
 
+	match = of_match_device(hx8357_dt_ids, &spi->dev);
+	if (!match || !match->data)
+		return -EINVAL;
+
 	lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0);
 	if (!gpio_is_valid(lcd->reset)) {
 		dev_err(&spi->dev, "Missing dt property: gpios-reset\n");
@@ -462,7 +655,9 @@ static int hx8357_probe(struct spi_device *spi)
 	}
 	spi_set_drvdata(spi, lcdev);
 
-	ret = hx8357_lcd_init(lcdev);
+	hx8357_lcd_reset(lcdev);
+
+	ret = ((int (*)(struct lcd_device *))match->data)(lcdev);
 	if (ret) {
 		dev_err(&spi->dev, "Couldn't initialize panel\n");
 		goto init_error;
@@ -485,12 +680,6 @@ static int hx8357_remove(struct spi_device *spi)
 	return 0;
 }
 
-static const struct of_device_id hx8357_dt_ids[] = {
-	{ .compatible = "himax,hx8357" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
-
 static struct spi_driver hx8357_driver = {
 	.probe  = hx8357_probe,
 	.remove = hx8357_remove,
-- 
1.8.3.4

[PATCHv3 3/3] fb: backlight: HX8357: Add HX8369 support

[Maxime Ripard]

From: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Add support for the Himax HX8369 controller as it is quite similar to the
hx8357.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
---
 drivers/video/backlight/hx8357.c | 219 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 204 insertions(+), 15 deletions(-)

diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
index 47237fa..c7af8c4 100644
--- a/drivers/video/backlight/hx8357.c
+++ b/drivers/video/backlight/hx8357.c
@@ -71,6 +71,18 @@
 #define HX8357_SET_POWER_NORMAL		0xd2
 #define HX8357_SET_PANEL_RELATED	0xe9
 
+#define HX8369_SET_DISPLAY_BRIGHTNESS		0x51
+#define HX8369_WRITE_CABC_DISPLAY_VALUE		0x53
+#define HX8369_WRITE_CABC_BRIGHT_CTRL		0x55
+#define HX8369_WRITE_CABC_MIN_BRIGHTNESS	0x5e
+#define HX8369_SET_POWER			0xb1
+#define HX8369_SET_DISPLAY_MODE			0xb2
+#define HX8369_SET_DISPLAY_WAVEFORM_CYC		0xb4
+#define HX8369_SET_VCOM				0xb6
+#define HX8369_SET_EXTENSION_COMMAND		0xb9
+#define HX8369_SET_GIP				0xd5
+#define HX8369_SET_GAMMA_CURVE_RELATED		0xe0
+
 struct hx8357_data {
 	unsigned		im_pins[HX8357_NUM_IM_PINS];
 	unsigned		reset;
@@ -144,6 +156,61 @@ static u8 hx8357_seq_display_mode[] = {
 	HX8357_SET_DISPLAY_MODE_RGB_INTERFACE,
 };
 
+static u8 hx8369_seq_write_CABC_min_brightness[] = {
+	HX8369_WRITE_CABC_MIN_BRIGHTNESS, 0x00,
+};
+
+static u8 hx8369_seq_write_CABC_control[] = {
+	HX8369_WRITE_CABC_DISPLAY_VALUE, 0x24,
+};
+
+static u8 hx8369_seq_set_display_brightness[] = {
+	HX8369_SET_DISPLAY_BRIGHTNESS, 0xFF,
+};
+
+static u8 hx8369_seq_write_CABC_control_setting[] = {
+	HX8369_WRITE_CABC_BRIGHT_CTRL, 0x02,
+};
+
+static u8 hx8369_seq_extension_command[] = {
+	HX8369_SET_EXTENSION_COMMAND, 0xff, 0x83, 0x69,
+};
+
+static u8 hx8369_seq_display_related[] = {
+	HX8369_SET_DISPLAY_MODE, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00,
+	0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00,	0x01,
+};
+
+static u8 hx8369_seq_panel_waveform_cycle[] = {
+	HX8369_SET_DISPLAY_WAVEFORM_CYC, 0x0a, 0x1d, 0x80, 0x06, 0x02,
+};
+
+static u8 hx8369_seq_set_address_mode[] = {
+	HX8357_SET_ADDRESS_MODE, 0x00,
+};
+
+static u8 hx8369_seq_vcom[] = {
+	HX8369_SET_VCOM, 0x3e, 0x3e,
+};
+
+static u8 hx8369_seq_gip[] = {
+	HX8369_SET_GIP, 0x00, 0x01, 0x03, 0x25, 0x01, 0x02, 0x28, 0x70,
+	0x11, 0x13, 0x00, 0x00, 0x40, 0x26, 0x51, 0x37, 0x00, 0x00, 0x71,
+	0x35, 0x60, 0x24, 0x07, 0x0f, 0x04, 0x04,
+};
+
+static u8 hx8369_seq_power[] = {
+	HX8369_SET_POWER, 0x01, 0x00, 0x34, 0x03, 0x00, 0x11, 0x11, 0x32,
+	0x2f, 0x3f, 0x3f, 0x01, 0x3a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6,
+};
+
+static u8 hx8369_seq_gamma_curve_related[] = {
+	HX8369_SET_GAMMA_CURVE_RELATED, 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d,
+	0x2e, 0x4a, 0x08, 0x0e, 0x0f, 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
+	0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, 0x2e, 0x4a, 0x08, 0x0e, 0x0f,
+	0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
+};
+
 static int hx8357_spi_write_then_read(struct lcd_device *lcdev,
 				u8 *txbuf, u16 txlen,
 				u8 *rxbuf, u16 rxlen)
@@ -220,6 +287,10 @@ static int hx8357_enter_standby(struct lcd_device *lcdev)
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * The controller needs 120ms when entering in sleep mode before we can
+	 * send the command to go off sleep mode
+	 */
 	msleep(120);
 
 	return 0;
@@ -233,6 +304,10 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * The controller needs 120ms when exiting from sleep mode before we
+	 * can send the command to enter in sleep mode
+	 */
 	msleep(120);
 
 	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
@@ -242,6 +317,21 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
 	return 0;
 }
 
+static void hx8357_lcd_reset(struct lcd_device *lcdev)
+{
+	struct hx8357_data *lcd = lcd_get_data(lcdev);
+
+	/* Reset the screen */
+	gpio_set_value(lcd->reset, 1);
+	usleep_range(10000, 12000);
+	gpio_set_value(lcd->reset, 0);
+	usleep_range(10000, 12000);
+	gpio_set_value(lcd->reset, 1);
+
+	/* The controller needs 120ms to recover from reset */
+	msleep(120);
+}
+
 static int hx8357_lcd_init(struct lcd_device *lcdev)
 {
 	struct hx8357_data *lcd = lcd_get_data(lcdev);
@@ -257,14 +347,6 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
 		gpio_set_value_cansleep(lcd->im_pins[2], 1);
 	}
 
-	/* Reset the screen */
-	gpio_set_value(lcd->reset, 1);
-	usleep_range(10000, 12000);
-	gpio_set_value(lcd->reset, 0);
-	usleep_range(10000, 12000);
-	gpio_set_value(lcd->reset, 1);
-	msleep(120);
-
 	ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
 				ARRAY_SIZE(hx8357_seq_power));
 	if (ret < 0)
@@ -344,6 +426,9 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * The controller needs 120ms to fully recover from exiting sleep mode
+	 */
 	msleep(120);
 
 	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
@@ -359,6 +444,96 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
 	return 0;
 }
 
+static int hx8369_lcd_init(struct lcd_device *lcdev)
+{
+	int ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_extension_command,
+				ARRAY_SIZE(hx8369_seq_extension_command));
+	if (ret < 0)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_display_related,
+				ARRAY_SIZE(hx8369_seq_display_related));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_panel_waveform_cycle,
+				ARRAY_SIZE(hx8369_seq_panel_waveform_cycle));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_address_mode,
+				ARRAY_SIZE(hx8369_seq_set_address_mode));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_vcom,
+				ARRAY_SIZE(hx8369_seq_vcom));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_gip,
+				ARRAY_SIZE(hx8369_seq_gip));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_power,
+				ARRAY_SIZE(hx8369_seq_power));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * The controller needs 120ms to fully recover from exiting sleep mode
+	 */
+	msleep(120);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_gamma_curve_related,
+				ARRAY_SIZE(hx8369_seq_gamma_curve_related));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
+	if (ret < 0)
+		return ret;
+	usleep_range(1000, 1200);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_write_CABC_control,
+				ARRAY_SIZE(hx8369_seq_write_CABC_control));
+	if (ret < 0)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = hx8357_spi_write_array(lcdev,
+			hx8369_seq_write_CABC_control_setting,
+			ARRAY_SIZE(hx8369_seq_write_CABC_control_setting));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev,
+			hx8369_seq_write_CABC_min_brightness,
+			ARRAY_SIZE(hx8369_seq_write_CABC_min_brightness));
+	if (ret < 0)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_display_brightness,
+				ARRAY_SIZE(hx8369_seq_set_display_brightness));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 #define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
 
 static int hx8357_set_power(struct lcd_device *lcdev, int power)
@@ -391,10 +566,24 @@ static struct lcd_ops hx8357_ops = {
 	.get_power	= hx8357_get_power,
 };
 
+static const struct of_device_id hx8357_dt_ids[] = {
+	{
+		.compatible = "himax,hx8357",
+		.data = hx8357_lcd_init,
+	},
+	{
+		.compatible = "himax,hx8369",
+		.data = hx8369_lcd_init,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
+
 static int hx8357_probe(struct spi_device *spi)
 {
 	struct lcd_device *lcdev;
 	struct hx8357_data *lcd;
+	const struct of_device_id *match;
 	int i, ret;
 
 	lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
@@ -411,6 +600,10 @@ static int hx8357_probe(struct spi_device *spi)
 
 	lcd->spi = spi;
 
+	match = of_match_device(hx8357_dt_ids, &spi->dev);
+	if (!match || !match->data)
+		return -EINVAL;
+
 	lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0);
 	if (!gpio_is_valid(lcd->reset)) {
 		dev_err(&spi->dev, "Missing dt property: gpios-reset\n");
@@ -462,7 +655,9 @@ static int hx8357_probe(struct spi_device *spi)
 	}
 	spi_set_drvdata(spi, lcdev);
 
-	ret = hx8357_lcd_init(lcdev);
+	hx8357_lcd_reset(lcdev);
+
+	ret = ((int (*)(struct lcd_device *))match->data)(lcdev);
 	if (ret) {
 		dev_err(&spi->dev, "Couldn't initialize panel\n");
 		goto init_error;
@@ -485,12 +680,6 @@ static int hx8357_remove(struct spi_device *spi)
 	return 0;
 }
 
-static const struct of_device_id hx8357_dt_ids[] = {
-	{ .compatible = "himax,hx8357" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
-
 static struct spi_driver hx8357_driver = {
 	.probe  = hx8357_probe,
 	.remove = hx8357_remove,
-- 
1.8.3.4

Re: [PATCHv3 3/3] fb: backlight: HX8357: Add HX8369 support

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 1563 bytes --]

Hi,

On 01/08/13 11:40, Maxime Ripard wrote:
> From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> 
> Add support for the Himax HX8369 controller as it is quite similar to the
> hx8357.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> Acked-by: Jingoo Han <jg1.han@samsung.com>
> ---
>  drivers/video/backlight/hx8357.c | 219 ++++++++++++++++++++++++++++++++++++---
>  1 file changed, 204 insertions(+), 15 deletions(-)

I don't have comments about this patch as such, but hx8357.c in general:

- The commands used look like MIPI DCS commands. We have defined those
in include/video/mipi_display.h.

- The command arrays could be const

- I don't like command arrays. Rather than having array for
"HX8357_SET_COLUMN_ADDRESS, 0x00, 0x00, 0x01, 0x3f,", I'd much more like
a function hx8357_set_column_address(int x1, int x2) or such.

- Looking at the driver makes me think it resembles very much the panel
driver(s) we have for OMAP. If only CDF was ready... ;)

Those said, I don't see a problem with applying this. We could clean up
later those things mentioned above, but maybe it's better to do that
when moving to CDF.

For this and the two other patches:

Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

I can apply these to my 3.12-fbdev branch some day soon, if
Jean-Christophe hasn't come back yet (I'd normally rather deal only with
trivial patches, and leave the rest to Jean-Christophe).

 Tomi



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]

Re: [PATCHv3 3/3] fb: backlight: HX8357: Add HX8369 support

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 1563 bytes --]

Hi,

On 01/08/13 11:40, Maxime Ripard wrote:
> From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> 
> Add support for the Himax HX8369 controller as it is quite similar to the
> hx8357.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> Acked-by: Jingoo Han <jg1.han@samsung.com>
> ---
>  drivers/video/backlight/hx8357.c | 219 ++++++++++++++++++++++++++++++++++++---
>  1 file changed, 204 insertions(+), 15 deletions(-)

I don't have comments about this patch as such, but hx8357.c in general:

- The commands used look like MIPI DCS commands. We have defined those
in include/video/mipi_display.h.

- The command arrays could be const

- I don't like command arrays. Rather than having array for
"HX8357_SET_COLUMN_ADDRESS, 0x00, 0x00, 0x01, 0x3f,", I'd much more like
a function hx8357_set_column_address(int x1, int x2) or such.

- Looking at the driver makes me think it resembles very much the panel
driver(s) we have for OMAP. If only CDF was ready... ;)

Those said, I don't see a problem with applying this. We could clean up
later those things mentioned above, but maybe it's better to do that
when moving to CDF.

For this and the two other patches:

Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

I can apply these to my 3.12-fbdev branch some day soon, if
Jean-Christophe hasn't come back yet (I'd normally rather deal only with
trivial patches, and leave the rest to Jean-Christophe).

 Tomi



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]

[PATCHv3 3/3] fb: backlight: HX8357: Add HX8369 support

[Tomi Valkeinen]

Hi,

On 01/08/13 11:40, Maxime Ripard wrote:
> From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> 
> Add support for the Himax HX8369 controller as it is quite similar to the
> hx8357.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> Acked-by: Jingoo Han <jg1.han@samsung.com>
> ---
>  drivers/video/backlight/hx8357.c | 219 ++++++++++++++++++++++++++++++++++++---
>  1 file changed, 204 insertions(+), 15 deletions(-)

I don't have comments about this patch as such, but hx8357.c in general:

- The commands used look like MIPI DCS commands. We have defined those
in include/video/mipi_display.h.

- The command arrays could be const

- I don't like command arrays. Rather than having array for
"HX8357_SET_COLUMN_ADDRESS, 0x00, 0x00, 0x01, 0x3f,", I'd much more like
a function hx8357_set_column_address(int x1, int x2) or such.

- Looking at the driver makes me think it resembles very much the panel
driver(s) we have for OMAP. If only CDF was ready... ;)

Those said, I don't see a problem with applying this. We could clean up
later those things mentioned above, but maybe it's better to do that
when moving to CDF.

For this and the two other patches:

Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

I can apply these to my 3.12-fbdev branch some day soon, if
Jean-Christophe hasn't come back yet (I'd normally rather deal only with
trivial patches, and leave the rest to Jean-Christophe).

 Tomi


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 901 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130801/d8f53c2d/attachment.sig>

Re: [PATCHv3 3/3] fb: backlight: HX8357: Add HX8369 support

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 2037 bytes --]

Hi Tomi,

On Thu, Aug 01, 2013 at 03:39:27PM +0300, Tomi Valkeinen wrote:
> Hi,
> 
> On 01/08/13 11:40, Maxime Ripard wrote:
> > From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> > 
> > Add support for the Himax HX8369 controller as it is quite similar to the
> > hx8357.
> > 
> > Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > Acked-by: Jingoo Han <jg1.han@samsung.com>
> > ---
> >  drivers/video/backlight/hx8357.c | 219 ++++++++++++++++++++++++++++++++++++---
> >  1 file changed, 204 insertions(+), 15 deletions(-)
> 
> I don't have comments about this patch as such, but hx8357.c in general:
> 
> - The commands used look like MIPI DCS commands. We have defined those
> in include/video/mipi_display.h.

Aaah, yes indeed. Thanks for pointing that out.

> - The command arrays could be const

True.

> - I don't like command arrays. Rather than having array for
> "HX8357_SET_COLUMN_ADDRESS, 0x00, 0x00, 0x01, 0x3f,", I'd much more like
> a function hx8357_set_column_address(int x1, int x2) or such.

Hmm, Ok.

> - Looking at the driver makes me think it resembles very much the panel
> driver(s) we have for OMAP. If only CDF was ready... ;)
> 
> Those said, I don't see a problem with applying this. We could clean up
> later those things mentioned above, but maybe it's better to do that
> when moving to CDF.

Yes, CDF would be really great for this :)

Alexandre and I will try to find some time to do the cleanups you
requested.

> For this and the two other patches:
> 
> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> 
> I can apply these to my 3.12-fbdev branch some day soon, if
> Jean-Christophe hasn't come back yet (I'd normally rather deal only with
> trivial patches, and leave the rest to Jean-Christophe).

Great, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCHv3 3/3] fb: backlight: HX8357: Add HX8369 support

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 2037 bytes --]

Hi Tomi,

On Thu, Aug 01, 2013 at 03:39:27PM +0300, Tomi Valkeinen wrote:
> Hi,
> 
> On 01/08/13 11:40, Maxime Ripard wrote:
> > From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> > 
> > Add support for the Himax HX8369 controller as it is quite similar to the
> > hx8357.
> > 
> > Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > Acked-by: Jingoo Han <jg1.han@samsung.com>
> > ---
> >  drivers/video/backlight/hx8357.c | 219 ++++++++++++++++++++++++++++++++++++---
> >  1 file changed, 204 insertions(+), 15 deletions(-)
> 
> I don't have comments about this patch as such, but hx8357.c in general:
> 
> - The commands used look like MIPI DCS commands. We have defined those
> in include/video/mipi_display.h.

Aaah, yes indeed. Thanks for pointing that out.

> - The command arrays could be const

True.

> - I don't like command arrays. Rather than having array for
> "HX8357_SET_COLUMN_ADDRESS, 0x00, 0x00, 0x01, 0x3f,", I'd much more like
> a function hx8357_set_column_address(int x1, int x2) or such.

Hmm, Ok.

> - Looking at the driver makes me think it resembles very much the panel
> driver(s) we have for OMAP. If only CDF was ready... ;)
> 
> Those said, I don't see a problem with applying this. We could clean up
> later those things mentioned above, but maybe it's better to do that
> when moving to CDF.

Yes, CDF would be really great for this :)

Alexandre and I will try to find some time to do the cleanups you
requested.

> For this and the two other patches:
> 
> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> 
> I can apply these to my 3.12-fbdev branch some day soon, if
> Jean-Christophe hasn't come back yet (I'd normally rather deal only with
> trivial patches, and leave the rest to Jean-Christophe).

Great, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCHv3 3/3] fb: backlight: HX8357: Add HX8369 support

[Maxime Ripard]

Hi Tomi,

On Thu, Aug 01, 2013 at 03:39:27PM +0300, Tomi Valkeinen wrote:
> Hi,
> 
> On 01/08/13 11:40, Maxime Ripard wrote:
> > From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> > 
> > Add support for the Himax HX8369 controller as it is quite similar to the
> > hx8357.
> > 
> > Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > Acked-by: Jingoo Han <jg1.han@samsung.com>
> > ---
> >  drivers/video/backlight/hx8357.c | 219 ++++++++++++++++++++++++++++++++++++---
> >  1 file changed, 204 insertions(+), 15 deletions(-)
> 
> I don't have comments about this patch as such, but hx8357.c in general:
> 
> - The commands used look like MIPI DCS commands. We have defined those
> in include/video/mipi_display.h.

Aaah, yes indeed. Thanks for pointing that out.

> - The command arrays could be const

True.

> - I don't like command arrays. Rather than having array for
> "HX8357_SET_COLUMN_ADDRESS, 0x00, 0x00, 0x01, 0x3f,", I'd much more like
> a function hx8357_set_column_address(int x1, int x2) or such.

Hmm, Ok.

> - Looking at the driver makes me think it resembles very much the panel
> driver(s) we have for OMAP. If only CDF was ready... ;)
> 
> Those said, I don't see a problem with applying this. We could clean up
> later those things mentioned above, but maybe it's better to do that
> when moving to CDF.

Yes, CDF would be really great for this :)

Alexandre and I will try to find some time to do the cleanups you
requested.

> For this and the two other patches:
> 
> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> 
> I can apply these to my 3.12-fbdev branch some day soon, if
> Jean-Christophe hasn't come back yet (I'd normally rather deal only with
> trivial patches, and leave the rest to Jean-Christophe).

Great, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130802/cc613e15/attachment.sig>

Re: [PATCHv3 1/3] video: mxsfb: fix color settings for 18bit data bus and 32bpp

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 1180 bytes --]

On 01/08/13 11:40, Maxime Ripard wrote:
> From: Hector Palacios <hector.palacios@digi.com>
> 
> For a combination of 18bit LCD data bus width and a color
> mode of 32bpp, the driver was setting the color mapping to
> rgb666, which is wrong, as the color in memory realy has an
> rgb888 layout.
> 
> This patch also removes the setting of flag CTRL_DF24 that
> makes the driver dimiss the upper 2 bits when handling 32/24bpp
> colors in a diplay with 18bit data bus width. This flag made
> true color images display wrong in such configurations.
> 
> Finally, the color mapping rgb666 has also been removed as nobody
> is using it and high level applications like Qt5 cannot work
> with it either.
> 
> Reference: https://lkml.org/lkml/2013/5/23/220
> Signed-off-by: Hector Palacios <hector.palacios@digi.com>
> Acked-by: Juergen Beisert <jbe@pengutronix.de>
> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
>  drivers/video/mxsfb.c | 26 --------------------------
>  1 file changed, 26 deletions(-)

This one is labeled as "fix". Should it got to v3.11?

 Tomi




[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]

Re: [PATCHv3 1/3] video: mxsfb: fix color settings for 18bit data bus and 32bpp

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 1180 bytes --]

On 01/08/13 11:40, Maxime Ripard wrote:
> From: Hector Palacios <hector.palacios@digi.com>
> 
> For a combination of 18bit LCD data bus width and a color
> mode of 32bpp, the driver was setting the color mapping to
> rgb666, which is wrong, as the color in memory realy has an
> rgb888 layout.
> 
> This patch also removes the setting of flag CTRL_DF24 that
> makes the driver dimiss the upper 2 bits when handling 32/24bpp
> colors in a diplay with 18bit data bus width. This flag made
> true color images display wrong in such configurations.
> 
> Finally, the color mapping rgb666 has also been removed as nobody
> is using it and high level applications like Qt5 cannot work
> with it either.
> 
> Reference: https://lkml.org/lkml/2013/5/23/220
> Signed-off-by: Hector Palacios <hector.palacios@digi.com>
> Acked-by: Juergen Beisert <jbe@pengutronix.de>
> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
>  drivers/video/mxsfb.c | 26 --------------------------
>  1 file changed, 26 deletions(-)

This one is labeled as "fix". Should it got to v3.11?

 Tomi




[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]

[PATCHv3 1/3] video: mxsfb: fix color settings for 18bit data bus and 32bpp

[Tomi Valkeinen]

On 01/08/13 11:40, Maxime Ripard wrote:
> From: Hector Palacios <hector.palacios@digi.com>
> 
> For a combination of 18bit LCD data bus width and a color
> mode of 32bpp, the driver was setting the color mapping to
> rgb666, which is wrong, as the color in memory realy has an
> rgb888 layout.
> 
> This patch also removes the setting of flag CTRL_DF24 that
> makes the driver dimiss the upper 2 bits when handling 32/24bpp
> colors in a diplay with 18bit data bus width. This flag made
> true color images display wrong in such configurations.
> 
> Finally, the color mapping rgb666 has also been removed as nobody
> is using it and high level applications like Qt5 cannot work
> with it either.
> 
> Reference: https://lkml.org/lkml/2013/5/23/220
> Signed-off-by: Hector Palacios <hector.palacios@digi.com>
> Acked-by: Juergen Beisert <jbe@pengutronix.de>
> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
>  drivers/video/mxsfb.c | 26 --------------------------
>  1 file changed, 26 deletions(-)

This one is labeled as "fix". Should it got to v3.11?

 Tomi



-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 901 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130802/098526fa/attachment.sig>

Re: [PATCHv3 1/3] video: mxsfb: fix color settings for 18bit data bus and 32bpp

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1449 bytes --]

On Fri, Aug 02, 2013 at 11:35:29AM +0300, Tomi Valkeinen wrote:
> On 01/08/13 11:40, Maxime Ripard wrote:
> > From: Hector Palacios <hector.palacios@digi.com>
> > 
> > For a combination of 18bit LCD data bus width and a color
> > mode of 32bpp, the driver was setting the color mapping to
> > rgb666, which is wrong, as the color in memory realy has an
> > rgb888 layout.
> > 
> > This patch also removes the setting of flag CTRL_DF24 that
> > makes the driver dimiss the upper 2 bits when handling 32/24bpp
> > colors in a diplay with 18bit data bus width. This flag made
> > true color images display wrong in such configurations.
> > 
> > Finally, the color mapping rgb666 has also been removed as nobody
> > is using it and high level applications like Qt5 cannot work
> > with it either.
> > 
> > Reference: https://lkml.org/lkml/2013/5/23/220
> > Signed-off-by: Hector Palacios <hector.palacios@digi.com>
> > Acked-by: Juergen Beisert <jbe@pengutronix.de>
> > Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > ---
> >  drivers/video/mxsfb.c | 26 --------------------------
> >  1 file changed, 26 deletions(-)
> 
> This one is labeled as "fix". Should it got to v3.11?

It would be better yes. Otherwise, 3.12 will do.

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCHv3 1/3] video: mxsfb: fix color settings for 18bit data bus and 32bpp

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1449 bytes --]

On Fri, Aug 02, 2013 at 11:35:29AM +0300, Tomi Valkeinen wrote:
> On 01/08/13 11:40, Maxime Ripard wrote:
> > From: Hector Palacios <hector.palacios@digi.com>
> > 
> > For a combination of 18bit LCD data bus width and a color
> > mode of 32bpp, the driver was setting the color mapping to
> > rgb666, which is wrong, as the color in memory realy has an
> > rgb888 layout.
> > 
> > This patch also removes the setting of flag CTRL_DF24 that
> > makes the driver dimiss the upper 2 bits when handling 32/24bpp
> > colors in a diplay with 18bit data bus width. This flag made
> > true color images display wrong in such configurations.
> > 
> > Finally, the color mapping rgb666 has also been removed as nobody
> > is using it and high level applications like Qt5 cannot work
> > with it either.
> > 
> > Reference: https://lkml.org/lkml/2013/5/23/220
> > Signed-off-by: Hector Palacios <hector.palacios@digi.com>
> > Acked-by: Juergen Beisert <jbe@pengutronix.de>
> > Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > ---
> >  drivers/video/mxsfb.c | 26 --------------------------
> >  1 file changed, 26 deletions(-)
> 
> This one is labeled as "fix". Should it got to v3.11?

It would be better yes. Otherwise, 3.12 will do.

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCHv3 1/3] video: mxsfb: fix color settings for 18bit data bus and 32bpp

[Maxime Ripard]

On Fri, Aug 02, 2013 at 11:35:29AM +0300, Tomi Valkeinen wrote:
> On 01/08/13 11:40, Maxime Ripard wrote:
> > From: Hector Palacios <hector.palacios@digi.com>
> > 
> > For a combination of 18bit LCD data bus width and a color
> > mode of 32bpp, the driver was setting the color mapping to
> > rgb666, which is wrong, as the color in memory realy has an
> > rgb888 layout.
> > 
> > This patch also removes the setting of flag CTRL_DF24 that
> > makes the driver dimiss the upper 2 bits when handling 32/24bpp
> > colors in a diplay with 18bit data bus width. This flag made
> > true color images display wrong in such configurations.
> > 
> > Finally, the color mapping rgb666 has also been removed as nobody
> > is using it and high level applications like Qt5 cannot work
> > with it either.
> > 
> > Reference: https://lkml.org/lkml/2013/5/23/220
> > Signed-off-by: Hector Palacios <hector.palacios@digi.com>
> > Acked-by: Juergen Beisert <jbe@pengutronix.de>
> > Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > ---
> >  drivers/video/mxsfb.c | 26 --------------------------
> >  1 file changed, 26 deletions(-)
> 
> This one is labeled as "fix". Should it got to v3.11?

It would be better yes. Otherwise, 3.12 will do.

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130802/7d50883f/attachment.sig>