* [U-Boot] Pull request - fpga
@ 2013-08-12 6:59 Michal Simek
2013-08-12 16:00 ` Tom Rini
2013-11-06 8:17 ` Michal Simek
0 siblings, 2 replies; 7+ messages in thread
From: Michal Simek @ 2013-08-12 6:59 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull these two patches to your tree.
Both patches targets Zynq fpga code.
Thanks,
Michal
The following changes since commit a78dac79ede7fbb4c9e816abc879655540c3f076:
nds32: fix the missing COBJS-y change (2013-08-09 01:51:24 +0800)
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.git fpga
for you to fetch changes up to 5f93227ce02d9cafa11704c807a80dcbde129f8c:
fpga: zynqpl: Clear loopback mode during device init (2013-08-12 08:52:01 +0200)
----------------------------------------------------------------
Michal Simek (1):
fpga: zynqpl: Add support for zc7100 device.
Soren Brinkmann (1):
fpga: zynqpl: Clear loopback mode during device init
board/xilinx/zynq/board.c | 4 ++++
drivers/fpga/zynqpl.c | 6 +++++-
include/zynqpl.h | 5 +++++
3 files changed, 14 insertions(+), 1 deletion(-)
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130812/46f689e9/attachment.pgp>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] Pull request - fpga
2013-08-12 6:59 [U-Boot] Pull request - fpga Michal Simek
@ 2013-08-12 16:00 ` Tom Rini
2013-11-06 8:17 ` Michal Simek
1 sibling, 0 replies; 7+ messages in thread
From: Tom Rini @ 2013-08-12 16:00 UTC (permalink / raw)
To: u-boot
On Mon, Aug 12, 2013 at 08:59:01AM +0200, Michal Simek wrote:
> Hi Tom,
>
> please pull these two patches to your tree.
> Both patches targets Zynq fpga code.
>
> Thanks,
> Michal
>
>
> The following changes since commit a78dac79ede7fbb4c9e816abc879655540c3f076:
>
> nds32: fix the missing COBJS-y change (2013-08-09 01:51:24 +0800)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-microblaze.git fpga
>
> for you to fetch changes up to 5f93227ce02d9cafa11704c807a80dcbde129f8c:
>
> fpga: zynqpl: Clear loopback mode during device init (2013-08-12 08:52:01 +0200)
>
> ----------------------------------------------------------------
> Michal Simek (1):
> fpga: zynqpl: Add support for zc7100 device.
>
> Soren Brinkmann (1):
> fpga: zynqpl: Clear loopback mode during device init
>
> board/xilinx/zynq/board.c | 4 ++++
> drivers/fpga/zynqpl.c | 6 +++++-
> include/zynqpl.h | 5 +++++
> 3 files changed, 14 insertions(+), 1 deletion(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130812/e46f8db3/attachment.pgp>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] Pull request - fpga
2013-08-12 6:59 [U-Boot] Pull request - fpga Michal Simek
2013-08-12 16:00 ` Tom Rini
@ 2013-11-06 8:17 ` Michal Simek
2013-11-07 0:55 ` Tom Rini
1 sibling, 1 reply; 7+ messages in thread
From: Michal Simek @ 2013-11-06 8:17 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull these 3 changes to your tree.
Thanks,
Michal
The following changes since commit e5a9a4076f1fb9fb9ce53c2aec32422073bbc66a:
pxe: fix handling of absolute paths (2013-11-04 11:24:22 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.git fpga
for you to fetch changes up to 32d7cdd366a1516fa498464c261851f3a76a62ef:
fpga: Add support for gzip images with bitstreams (2013-11-06 09:15:12 +0100)
----------------------------------------------------------------
Jagannadha Sutradharudu Teki (1):
fpga: zynqpl: Add dcache flush support
Michal Simek (2):
fpga: zynqpl: Do not place bitstream below 1MB
fpga: Add support for gzip images with bitstreams
common/cmd_fpga.c | 22 +++++++++++++++++++---
drivers/fpga/zynqpl.c | 15 +++++++++++++--
2 files changed, 32 insertions(+), 5 deletions(-)
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131106/8e17036e/attachment.pgp>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] Pull request - fpga
2013-11-06 8:17 ` Michal Simek
@ 2013-11-07 0:55 ` Tom Rini
0 siblings, 0 replies; 7+ messages in thread
From: Tom Rini @ 2013-11-07 0:55 UTC (permalink / raw)
To: u-boot
On Wed, Nov 06, 2013 at 09:17:00AM +0100, Michal Simek wrote:
> Hi Tom,
>
> please pull these 3 changes to your tree.
>
> Thanks,
> Michal
>
>
> The following changes since commit e5a9a4076f1fb9fb9ce53c2aec32422073bbc66a:
>
> pxe: fix handling of absolute paths (2013-11-04 11:24:22 -0500)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-microblaze.git fpga
>
> for you to fetch changes up to 32d7cdd366a1516fa498464c261851f3a76a62ef:
>
> fpga: Add support for gzip images with bitstreams (2013-11-06 09:15:12 +0100)
>
> ----------------------------------------------------------------
> Jagannadha Sutradharudu Teki (1):
> fpga: zynqpl: Add dcache flush support
>
> Michal Simek (2):
> fpga: zynqpl: Do not place bitstream below 1MB
> fpga: Add support for gzip images with bitstreams
>
> common/cmd_fpga.c | 22 +++++++++++++++++++---
> drivers/fpga/zynqpl.c | 15 +++++++++++++--
> 2 files changed, 32 insertions(+), 5 deletions(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131106/e195280f/attachment.pgp>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] Pull request - fpga
2013-05-06 8:50 Michal Simek
2013-05-10 8:40 ` Albert ARIBAUD
@ 2013-05-10 16:33 ` Albert ARIBAUD
1 sibling, 0 replies; 7+ messages in thread
From: Albert ARIBAUD @ 2013-05-10 16:33 UTC (permalink / raw)
To: u-boot
Hi Michal,
On Mon, 06 May 2013 10:50:44 +0200, Michal Simek <monstr@monstr.eu>
wrote:
> Hi Tom and Albert,
>
> I have created fpga branch. It is based on zynq patches(and request)
> I sent last week.
> The reason why it is based on it is that new zynq fpga driver
> and changes in zynq I have done.
> Just talk to each other and be aware that this fpga patchset
> is based on zynq one.
>
> Thanks,
> Michal
>
>
>
> The following changes since commit 8934f7846501070a5b01c1fab5db27559e9d70d1:
>
> i2c: zynq: Add support for Xilinx Zynq (2013-04-30 11:39:28 +0200)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-microblaze.git fpga
>
> for you to fetch changes up to b03b25caea1ff3a501161f5bc1ad5e5b5b124e0c:
>
> fpga: Remove all CONFIG_SYS_* fpga related options (2013-05-06 10:41:30 +0200)
>
> ----------------------------------------------------------------
> Michal Simek (9):
> fpga: Clean coding style
> fpga: Fix debug message compilation error
> cmd: fpga: Clean coding style
> cmd: fpga: Move fpga_loadbitstream to fpga.c
> fpga: Change the first parameter in fpga_loadbitstream
> cmd: fpga: Do not include net.h
> fpga: zynq: Add support for loading bitstream
> fpga: Check device name against bitstream name
> fpga: Remove all CONFIG_SYS_* fpga related options
>
> arch/arm/cpu/armv7/zynq/slcr.c | 35 ++++++++++++
> arch/arm/include/asm/arch-zynq/hardware.h | 10 +++-
> arch/arm/include/asm/arch-zynq/sys_proto.h | 3 +
> board/xilinx/zynq/board.c | 37 ++++++++++++
> common/cmd_fpga.c | 254 ++++++++++++++++++++++++++-------------------------------------------------------
> drivers/fpga/Makefile | 1 +
> drivers/fpga/fpga.c | 225 +++++++++++++++++++++++++++++++++++-------------------------------------
> drivers/fpga/xilinx.c | 146 +++++++++++++++++++++++++++++++++++++++++++++++
> drivers/fpga/zynqpl.c | 355 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/altera.h | 17 ------
> include/configs/M54455EVB.h | 2 +-
> include/configs/MERGERBOX.h | 2 +-
> include/configs/MVBC_P.h | 2 +-
> include/configs/MVBLM7.h | 2 +-
> include/configs/MVSMR.h | 2 +-
> include/configs/omap3_mvblx.h | 2 +-
> include/configs/zynq.h | 6 ++
> include/fpga.h | 13 +----
> include/lattice.h | 3 -
> include/xilinx.h | 25 +-------
> include/zynqpl.h | 59 +++++++++++++++++++
> 21 files changed, 848 insertions(+), 353 deletions(-)
> create mode 100644 drivers/fpga/zynqpl.c
> create mode 100644 include/zynqpl.h
>
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] Pull request - fpga
2013-05-06 8:50 Michal Simek
@ 2013-05-10 8:40 ` Albert ARIBAUD
2013-05-10 16:33 ` Albert ARIBAUD
1 sibling, 0 replies; 7+ messages in thread
From: Albert ARIBAUD @ 2013-05-10 8:40 UTC (permalink / raw)
To: u-boot
Hi Michal,
On Mon, 06 May 2013 10:50:44 +0200, Michal Simek <monstr@monstr.eu>
wrote:
> Hi Tom and Albert,
>
> I have created fpga branch. It is based on zynq patches(and request)
> I sent last week.
> The reason why it is based on it is that new zynq fpga driver
> and changes in zynq I have done.
> Just talk to each other and be aware that this fpga patchset
> is based on zynq one.
>
> Thanks,
> Michal
As this is related to the Zynq series and Tom has reviewed it too, I'll
pull it in the ARM tree right after I pull the Zynq patches.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] Pull request - fpga
@ 2013-05-06 8:50 Michal Simek
2013-05-10 8:40 ` Albert ARIBAUD
2013-05-10 16:33 ` Albert ARIBAUD
0 siblings, 2 replies; 7+ messages in thread
From: Michal Simek @ 2013-05-06 8:50 UTC (permalink / raw)
To: u-boot
Hi Tom and Albert,
I have created fpga branch. It is based on zynq patches(and request)
I sent last week.
The reason why it is based on it is that new zynq fpga driver
and changes in zynq I have done.
Just talk to each other and be aware that this fpga patchset
is based on zynq one.
Thanks,
Michal
The following changes since commit 8934f7846501070a5b01c1fab5db27559e9d70d1:
i2c: zynq: Add support for Xilinx Zynq (2013-04-30 11:39:28 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.git fpga
for you to fetch changes up to b03b25caea1ff3a501161f5bc1ad5e5b5b124e0c:
fpga: Remove all CONFIG_SYS_* fpga related options (2013-05-06 10:41:30 +0200)
----------------------------------------------------------------
Michal Simek (9):
fpga: Clean coding style
fpga: Fix debug message compilation error
cmd: fpga: Clean coding style
cmd: fpga: Move fpga_loadbitstream to fpga.c
fpga: Change the first parameter in fpga_loadbitstream
cmd: fpga: Do not include net.h
fpga: zynq: Add support for loading bitstream
fpga: Check device name against bitstream name
fpga: Remove all CONFIG_SYS_* fpga related options
arch/arm/cpu/armv7/zynq/slcr.c | 35 ++++++++++++
arch/arm/include/asm/arch-zynq/hardware.h | 10 +++-
arch/arm/include/asm/arch-zynq/sys_proto.h | 3 +
board/xilinx/zynq/board.c | 37 ++++++++++++
common/cmd_fpga.c | 254 ++++++++++++++++++++++++++-------------------------------------------------------
drivers/fpga/Makefile | 1 +
drivers/fpga/fpga.c | 225 +++++++++++++++++++++++++++++++++++-------------------------------------
drivers/fpga/xilinx.c | 146 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/fpga/zynqpl.c | 355 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/altera.h | 17 ------
include/configs/M54455EVB.h | 2 +-
include/configs/MERGERBOX.h | 2 +-
include/configs/MVBC_P.h | 2 +-
include/configs/MVBLM7.h | 2 +-
include/configs/MVSMR.h | 2 +-
include/configs/omap3_mvblx.h | 2 +-
include/configs/zynq.h | 6 ++
include/fpga.h | 13 +----
include/lattice.h | 3 -
include/xilinx.h | 25 +-------
include/zynqpl.h | 59 +++++++++++++++++++
21 files changed, 848 insertions(+), 353 deletions(-)
create mode 100644 drivers/fpga/zynqpl.c
create mode 100644 include/zynqpl.h
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130506/028c0c81/attachment.pgp>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-11-07 0:55 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-12 6:59 [U-Boot] Pull request - fpga Michal Simek
2013-08-12 16:00 ` Tom Rini
2013-11-06 8:17 ` Michal Simek
2013-11-07 0:55 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2013-05-06 8:50 Michal Simek
2013-05-10 8:40 ` Albert ARIBAUD
2013-05-10 16:33 ` Albert ARIBAUD
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.