All of lore.kernel.org
 help / color / mirror / Atom feed
From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PULL] : Please pull u-boot-imx - applied to a temporary repo, see inside
Date: Sat, 17 Aug 2013 18:26:33 +0200	[thread overview]
Message-ID: <20130817182633.1a808a3f@lilith> (raw)
In-Reply-To: <5208E789.6060402@denx.de>

Hi Stefano,

On Mon, 12 Aug 2013 15:47:53 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks.
> 
> The following changes since commit fdce7b633a1de24456226b18527cc7900c34282a:
> 
>   gpio: omap5-uevm: Configure the tca6424 gpio expander (2013-07-30
> 09:21:42 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 326ea986ac150acdc7656d57fca647db80b50158:
> 
>   Merge git://git.denx.de/u-boot-arm (2013-07-31 11:30:38 +0200)
> 
> ----------------------------------------------------------------
> 
> Dirk Behme (1):
>       mxc_gpio: Correct the GPIO handling in gpio_direction_output()
> 
> Eric Nelson (1):
>       mxc_ipuv3: fix memory alignment of framebuffer
> 
> Fabio Estevam (1):
>       mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x
> 
> Marek Vasut (1):
>       ARM: mxs: Consolidate configuration options
> 
> Otavio Salvador (1):
>       wandboard: Use splash image at screen center by default
> 
> Pardeep Kumar Singla (2):
>       mx6: Factor out common HDMI setup code
>       mx6qsabresd: Add splash screen support via HDMI
> 
> Robert Winkler (2):
>       imx: Add documentation for imx specific commands
>       imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors
> 
> Stefano Babic (1):
>       Merge git://git.denx.de/u-boot-arm
> 
>  MAINTAINERS                                        |    2 +-
>  README                                             |   15 +
>  arch/arm/cpu/armv7/mx6/clock.c                     |    8 +
>  arch/arm/cpu/armv7/mx6/soc.c                       |   43 +
>  arch/arm/imx-common/cmd_hdmidet.c                  |    3 +-
>  arch/arm/include/asm/arch-mx6/clock.h              |    2 +-
>  arch/arm/include/asm/arch-mx6/mxc_hdmi.h           |    8 +
>  .../nitrogen6x/README.mx6qsabrelite}               |    0
>  board/boundary/nitrogen6x/nitrogen6x.c             |   46 +-
>  board/freescale/mx6qsabrelite/Makefile             |   28 -
>  board/freescale/mx6qsabrelite/mx6qsabrelite.c      |  832
> --------------------
>  board/freescale/mx6sabresd/mx6sabresd.c            |   64 +-
>  board/wandboard/wandboard.c                        |   44 +-
>  boards.cfg                                         |    2 +-
>  drivers/gpio/mxc_gpio.c                            |    4 +-
>  drivers/video/mxc_ipuv3_fb.c                       |    5 +-
>  include/configs/apx4devkit.h                       |  120 +--
>  include/configs/m28evk.h                           |  192 +----
>  include/configs/mx23_olinuxino.h                   |  142 +---
>  include/configs/mx23evk.h                          |  115 +--
>  include/configs/mx28evk.h                          |  173 +---
>  include/configs/mx6qsabrelite.h                    |  284 -------
>  include/configs/mx6sabre_common.h                  |    3 +-
>  include/configs/mx6sabresd.h                       |   19 +
>  include/configs/mxs.h                              |  191 +++++
>  include/configs/nitrogen6x.h                       |   81 +-
>  include/configs/sc_sps_1.h                         |  139 +---
>  include/configs/wandboard.h                        |    2 +
>  28 files changed, 601 insertions(+), 1966 deletions(-)
>  rename board/{freescale/mx6qsabrelite/README =>
> boundary/nitrogen6x/README.mx6qsabrelite} (100%)
>  delete mode 100644 board/freescale/mx6qsabrelite/Makefile
>  delete mode 100644 board/freescale/mx6qsabrelite/mx6qsabrelite.c
>  delete mode 100644 include/configs/mx6qsabrelite.h
>  create mode 100644 include/configs/mxs.h
> 
> 

Applied to u-boot-arm/master, thanks -- BUT at the moment I cannot push
to u-boot-arm at denx. While this gets solved, I have set up a temporary
repo at 88.191.163.10. People can fetch it with

	git fetch git://88.191.163.10/u-boot-arm

You won't have write access of course.

Amicalement,
-- 
Albert.

      reply	other threads:[~2013-08-17 16:26 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-12 13:47 [U-Boot] [PULL] : Please pull u-boot-imx Stefano Babic
2013-08-17 16:26 ` Albert ARIBAUD [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130817182633.1a808a3f@lilith \
    --to=albert.u.boot@aribaud.net \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.